Text

Final Operating Exam (Sections a, B, and C) (Folder 3)
	ML103640349
Person / Time
Site:	Nine Mile Point
Issue date:	10/27/2010
From:	; Constellation Energy Nuclear Group
To:	Fish T H; Operations Branch I
	Hansell S
Shared Package
ML101900599	List: IR 05000410/2010302; ML102140374; ML103090619; ML103090636; ML103090647; ML103120049; ML103640250; ML103640338; ML103640340; ML103640349; ML110310468;
References
	TAC U01790
	Download: ML103640349 (203)
	v • d • e

NRC JPM SRO C001 Constellation Energy NMP UNIT OPERATOR JOB PERFORMANCE Title: Review Daily Checks Log lAW N2-0SP-LOG-D001 Revision:

NRC 2010 Task Number: NA Approvals:

NA Exam Security I General Supervisor Date Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

____________(SRO) Trainer/Evaluator:

_________ Evaluation Method: Perform Evaluation Location:

Simulator or Other Designated Location Expected Completion Time: 45 minutes Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator Signature:

_____________

_ Date:______ NRC 2010 Admin SRO/JPM C001 November 2010 Recommended Start Location: (Completion time based on the start location)

Any appropriate location with the required Reference Material.

Simulator Set-up: None Directions to the Instructor/Evaluator:

To be performed as an administrative JPM. Directions to Operators:

Read Before Every JPM For the performance of this JPM, I will function as the SM, CRO, and Plant Prior to providing direction to perform this task, I will provide you with the initial and answer any questions.

During task performance, I will identify the steps to simulated, or discuss and provide cues as Read Before Each Evaluated JPM This evaluated JPM is a measure of your ability to perform this task independently. Control Room Supervisor has determined that a verifier is not available and that I concurrent verification will not be provided; therefore it should not be Read Before Each Training JPM During this Training JPM, applicable methods of verification are expected to be Therefore, either another individual or I will act as the additional I concurrent Notes to Instructor I Critical steps are identified as Pass/Fail.

All steps are sequenced critical unless denoted by a "e". During Evaluated e Self-verification shall be During Training JPM: Self-verification shall be demonstrated.

No other verification shall be N2-0SP-LOG-D001, Daily Checks Log OD-7 -100% power KIA 2.1.18(3.0)

Ability to make accurate, clear and concise logs, records, status boards, and reports. Tools and Equipment:

1.

Task N2-0SP-LOG-D001, Attachment 2 review completed and deSignated errors documented in the Remarks Section of N2-0SP-LOG-D001.

NRC 2010 Admin C001 November 2010 Initial Conditions: The plant is operating at 100% power. N2-0SP-LOG-0001 for the daily checks log has been completed and submitted for CRS/SM review. Ask the operator for any questions.

Initiating "(Operator's name), Perform a review of N2-0SP-LOG-0001, Attachment 2 and document results and required compensatory actions, if any, in Remarks Section on page 11 of N2-0SP-LOG-0001.

Attachment reviews for Item #'s 27,30 and 31 will be performed by another Provide repeat back of initiating cue. Evaluator Acknowledge repeat back providing correction if necessary EVALUATOR to provide copy of N2-0SP-LOG-D001 to candidate for review. RECORD START TIME __ .Obtain a copy of the reference procedure and review/utilize the correct section. Proper communications used for Sat/Unsat repeat back (GAP-OPS-01)

N2-0SP-LOG-0001 obtained.

SaUUnsat Attachment 2 referenced.

NRC 2010 Admin SROfJPM C001 November 2010 Initial Conditions: The plant is operating at 100% power. N2-0SP-LOG-0001 for the daily checks log has been completed and submitted for CRS/SM review. Initiating Cue: "(Operator's name), Perform a review of N2-0SP-LOG-0001, Attachment 2 and document results and required compensatory actions, if any, in the Remarks Section on page 11 of N2-0SP-LOG-0001.

Attachment reviews for Item #'s 27, 30 and 31 will be performed by another operator." NRC 201 Admin SRO/JPM C001 November 2010 NRC JPM SRO C002 Constellation Energy OPERATOR JOB PERFORMANCE Title: SRO Actions for Exceeding CDI Conductivity Action Level 3 Revision:

NRC 2010 Task Number: NA Approvals:

NA Exam Security I General Supervi or General Supervisor Date Operations Trai ing (Designee)

Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

_________(SRO) Trainer/Evaluator:

_______ Evaluation Method: Perform Evaluation Location:

Simulator or Other Designated Area Expected Completion Time: 20 min. Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ J PM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator Signature:

_____________

_ Date:______ NRC 2010 Admin SROI ..IPM C002 1 November 2010 Recommended Start Location: (Completion time based on the start location)

N/A Simulator Set-up: N/A Directions to the Instructor/Evaluator:

To be performed as an administrative JPM. Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the SM, CRO, and Auxiliary Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

Read Before Each Evaluated JPM Performance:

This evaluated .JPM is a measure of your ability to perform this task independently.

The Control Room Supervisor has determined that a verifier is not available and that additional!

concurrent verification will not be provided; therefore it should not be requested.

Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the additional I concurrent verifier.

Notes to Instructor I Evaluator: Critical steps are identified as Pass/Fail.

All steps are sequenced critical unless denoted by During Evaluated JPM: Self-verification shall be demonstrated. During Training JPM: Self-verification shall be demonstrated. No other verification shall be demonstrated.

References:

GAP-CHE-01 REVISION 14 KIA 2.1.25 (4.2), Ability to obtain and interpret station reference materials such as graphs and tables which contain performance data. KIA 2.1.34 (3.5) Ability to maintain the primary and secondary plant chemistry allowable Tools and NRC 2010 Admin SRO/JPM C002 November 2010 Task Determine plant shutdown and cooldown are required for COl value above Action Level 3 NRC 2010 Admin SRO/JPM C002 3 November 2010 Initial Conditions: The reactor is operating at 20% power You have just been told by the Chemistry Technician that Condensate Conductivity (COl) is reading 1.221 JJS/cm @ 25C and rising slowly. The source of the conductivity rise is indeterminate. A Biocide chemical addition to the system is ongoing. Ask the operator for any questions.

Initiating cue: "(Operator's name), determine and direct the applicable action(s), if any, for the given value of COl" Provide repeat back of Proper communications used for initiating cue. Evaluator repeat back Acknowledge repeat providing correction RECORD START TIME .Obtain a copy of the GAP-CHE-01 is obtained and SaUUnsat l reference procedure and Enclosure 2 is review/utilize the .Determines Action Level Using the supplied value of COl and 3 has been exceeded.

Enclosure

Determines that the given value of COl is above Action Level 3 IJS/cm). -Enters Section 3.2.3 of Notifies the following personnel that GAP-CHE-01.

COl has exceeded Action Level NRC 2010 Admin SRO/JPM C002 November 2010 Performance SteDs -Initiates an orderly shutdown. .Initiates a cooldown to <200F NOTE: May also identify that a PORC review of corrective actions is performed prior to any restart. Standard SM General Supervisor Chemistry Operations Manager Plant General Manager Vessel & Internals Program Mitigation Engineer Initiate an orderly shutdown as quickly as plant constraints permit. Initiate a cooldown to <200F as quickly as plant constraints permit. Grade Comments TERMINATING CUE:. Determine plant shutdown and cooldown are required for COl value above Action Level 3 RECORD STOP TIME____ NRC 2010 Admin SRO/JPM C002 November 2010 Initial Conditions: The reactor is operating at 20% power You have just been told by the Chemistry Technician that Condensate Conductivity (COl) is reading 1.221IJS/cm

@ 25C and rising slowly. The source of the conductivity rise is indeterminate. A Biocide chemical addition to the system is ongoing. Initiating Cue: "(Operator's name), determine and direct the applicable action(s), if any, for the given value of COl" NRC 2010 Admin SRO/JPM C002 November 2010 SRO Admin JPM EC Constellation Energy NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Review and Approval of Completed Surveillance Test, Revision:

NRC 2010 N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test. Task Number: NA Approvals:

NA Exam Security I Date General Supervisor Date Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

_____________(SRO) Trainer/Evaluator:

____________

_ Evaluation Method: L Perform ___Simulate Evaluation Location:

_Plant Expected Completion Time: 25 min. Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluators Signature:

_____________

_ Date:______ NRC 2010 Admin SRO/JPM EC November 2010 Recommended Start Location: (Completion time based on the start location)

Simulator Simulator Set-up (if required):

None Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM I CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM / CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this ..IPM, I will function as the SM, CRO, and Plant Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically manipulated.

Repositioning of devices will be simulated by discussion and acknowledged by my cues. Read Before Each Evaluated JPM Performance:

This evaluated JPM is a measure of your ability to perform this task independently.

The Control Room Supervisor has determined that a verifier is not available and that additional I concurrent verification will not be provided; therefore, it should not be requested.

Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor

/ Evaluator: Critical steps are identified in grading areas as Pass/Fail.

All steps are sequenced critical unless denoted by a "e". During Evaluated JPM: Self verification shall be demonstrated. During Training JPM: Self verification shall be demonstrated. No other verification shall be demonstrated.

References:

N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test NUREG KIA General Knowledges and Abilities 2.2.12 (4.1) NRC 2010 Admin SRO/JPM EC November 2010 Tools and Equipment: Copy of N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test, completed through Step 10.1 Task Standard:

Given a copy of N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test, the candidate will review the results, identify the discrepancies, and record the results in sections 10.1 and 10.2. NRC 2010 Admin SRO/JPM EC November 2010 Initial Conditions: The Plant is operating at 100% power. N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test, has just been completed.

Initiating Cues: "(Operator's name), this is a copy of N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test. Review the test results and complete Section 10.1 and 10.2." Performance Steps Provide repeat back of initiating cue. Evaluator Acknowledge repeat back providing correction if necessary RECORD START TIME ____ Review/utilize the correct section of the procedure.

Evaluator is to provide the marked up copy of N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test, to the candidate. Determines status of the completed surveillance.

NOTE: May inform examiner verbally of issues Standard Proper communications used for repeat back (GAP-OPS-011)

Grade SatlUnsat Reviews General Test Methods, References/Commitments and the Precaution and Limitation Sections.

SatlUnsat Reviews N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test and identifies the following in the remarks section: SatlUnsat

1. At Step 8.1.3 -the incorrect closing time was entered. The initial stroke time of 3.5 seconds should have been entered. lAW precaution and limitation 6.2.1. Pass/Fail The initial stroke time is noted in the remarks section 10.2 (1. -3.5 seconds) 2. At step 8.5.8, the closing stroke time exceeds the TS limit and the SAT block is checked. The UNSAT block should be checked. Pass/Fail

3. The valve at Step 8.5.8 was stroked a second time which is not permitted per P&L 6.2.2. SatlUnsat NRC 2010 Admin SRO/JPM EC November 2010 Performance Steps 4. Notify appropriate Plant Management. Acknowledge the information presented.

Standard 4. TS 3.6.1.3.A.1 must be entered -for valve at step 8.5.8. -Isolate the affected penetration within 4 hours4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months . There is an additional TS action to verify the isolated penetration every 31 days however that is NOT Critical.

The ONLY part of this step that is critical is the 4 hour4.62963e-5 days 0.00111 hours 6.613757e-6 weeks 1.522e-6 months action. Notifies EXAMINER/Ops MGR or designee of issues identified.

Grade Pass/Fail SatlUnsat Terminating Cue: Determination of the status of this surveillance has been made. RECORD STOP TIME ____ NRC 2010 Admin SRO/JPM EC November 2010 Initial Conditions: The Plant is operating at 100% power. N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test, has just been completed through Section 10.1. Initiating Cues: "(Operator's name), this is a copy of N2-0SP-CPS-Q001, Primary Containment Purge System Valve Operability Test. Review the test results and complete Section 10.1 and 10.2." NRC 2010 Admin SRO/JPM EC November 2010 NRC JPM SRO RC Constellation Energy Nuclear NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Generate and approve an Emergency Exposure Authorization Revision:

NRC 2010 Task Number: N/A Approvals:

N/A Exam Security I General Supervisor Date Operations (Designee)

N/A -Exam Security I Configuration Control Date Performer:

_________(SRO) Trainer/Evaluator:

_______ Evaluation Method: Perform Evaluation Location:

Classroom Expected Completion Time: 25 minutes Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator Signature:

_____________

_ Date:______ NRC 2010 SRO ADMIN JPM RC November 2010 Recommended Start Location:

Classroom Simulator Set-up: None Directions to the Instructor/Evaluator:

None Directions to Operators:

Read Before Every JPM For the performance of this JPM, I will function as the Radiation Protection, CRO, and Operators.

Prior to providing direction to perform this task, I will provide you with the conditions and answer any questions.

During task performance, I will identify the steps to simulated, or discuss and provide cues as Read Before Each Evaluated JPM This evaluated JPM is a measure of your ability to perform this task independently.

The Room Supervisor has determined that a verifier is not available and that additional I concurrent verification will not be provided; therefore it should not be requested.

Read Before Each Training JPM During this Training JPM, applicable methods of verification are expected to be used.

either another individual or I will act as the additional I concurrent Notes to Instructor I Evaluator:

1. Critical steps are identified as Pass/Fail.

2. During evaluated JPM:

Self-verification shall be demonstrated.

3. During training JPM:

Self-verification shall be demonstrated.

No other verification shall be demonstrated.

References:

1. NUREG 1123, 2.3.4, SRO 3.7 2. EPIP-EPP-15 Tools and Equipment:

1. Calculator Task Standard:

Generate and approve an Emergency Exposure Authorization Form and estimate exposure.

NRC 2010 SRO ADIVIIN JPM RC November 2010 Initial Conditions: A Site Area Emergency is in progress. You have assumed the responsibilities of the Shift Manager/Emergency Director. A RCIC steam leak into the Reactor Building cannot be isolated without manually shutting ICS*MOV121. Entry to the Reactor Building is required to manually close valve ICS*MOV121 to stop a release to the environment. Time to complete the task for an experienced Licensed Reactor Operator will be approximately 24 minutes. Time to complete the task for a new Licensed Reactor Operator will be approximately Radiation levels at the valve are approximately 15 Rlhr. Four (4) individuals are available to perform the task: Worker A is a volunteer who is an experienced Licensed Reactor Operator, has previously received a planned special exposure at another facility, and has received a dose of 150 mR this year (TLO Badge No. 11111, SSN 111-11-1111). Worker B is a volunteer who is an experienced Licensed Reactor Operator and is a declared pregnant worker and has received a dose of 15 mR this year (TLO Badge No. 22222, SSN 222-22-2222). Worker C is a volunteer who is an experienced Licensed Reactor Operator and has received a dose of 1800 mR this year (TLO Badge No. 33333, SSN 333-33-3333). Worker 0 is a volunteer who is a new Licensed Reactor Operator that has received a dose of 500 mR this year (TLO Badge No. 44444, SSN 444-44-4444). Ask the operator for any questions.

Initiating Cue: "(Operator's name), choose an individual to close valve ICS*MOV121, state the reason why that worker was chosen, estimate the expected radiation exposure and document your authorization for an Emergency Exposure." Provide repeat back of initiating cue Evaluator acknowledge repeat back providing correction if necessary RECORD START TIME ____ Obtain a copy of the reference procedure and review/utilize the correct section. Determine the expected exposure for the task NRC 2010 SRO ADMIN JPM RC Proper communications used for repeat back (GAP-OPS-01) EPIP-EPP-15 is obtained and Attachments 1 and 1-1 are referenced For an experienced worker Calculates that a 24 minute exposure in a 15 Rlhr field will cause a dose of 6R For a new worker -Calculates that a 30 minute exposure in a 15 Rlhr field will cause a dose of 7.5 R SatlUnsat SatlUnsat SatlUnsat November 2010 I Performance Steps I I Grade Select the best worker to perform the task Note: The following rationale supports worker selection: Worker A should NOT be chosen due to previously receiving a planned special exposure Worker B should NOT be chosen due to being a declared pregnant worker Worker C should be chosen because both their dose for the emergency exposure (6 R) will be less than that for Worker 0; additionally, the dose to the public will be minimized by the shorter task completion time of this experienced worker Worker D should NOT be chosen because their dose for the emergency exposure (7.5 R) will be greater than that for Worker C State reason for choosing the selected worker Estimate expected exposure Role Play: The Candidate may choose to brief the worker on radiological conditions, potential for steam leakage in the area, planned task, applicable ALARA measures, and contingency measures.

NRC 2010 SRO ADIVIIN JPM RC Determines the best worker for the task:

Does NOT select Worker A Does NOT select Worker B Selects Worker C Does NOT select Worker D :::J States that Worker C was chosen to minimize dose. 0 States that Worker A was NOT chosen due to a previous planned special exposure.

0 States that Worker B was NOT chosen due to being a declared pregnant worker. 0 States that Worker D was NOT chosen due to higher dose. 0 Determines Worker C will receive an estimated 6 R while completing the task (24 minutes x 15 Rlhr I 60 min/hr) Pass/Fail Pass/Fail Pass/Fail Pass/Fail Sat/Unsat Sat/Unsat Sat/Unsat Sat/Unsat Sat/Unsat November 2010 Role Play: As Worker C acknowledge the briefing.

Role Play: The Candidate may ask for an RWP to be generated.

Role playas RP and state that an RWP has been generated. Generate an Emergency Exposure

Candidate obtains a copy of Pass/Fail Authorization form EPP-15 Attachment 1-1 Candidate completes Section A (see attached key) TERMINATING CUE: Emergency Exposure Authorization Form has been completed.

RECORD STOP TIME____ NRC 2010 SRO ADMIN JPM RC November 2010 Initial Conditions: A Site Area Emergency is in progress. You have assumed the responsibilities of the Shift Manager/Emergency Director. A RCIC steam leak into the Reactor Building cannot be isolated without manually shutting ICS*MOV121. Entry to the Reactor Building is required to manually close ICS*MOV121 to stop a release to the Time to complete the task for an experienced Licensed Reactor Operator will be approximately 24 minutes. Time to complete the task for a new Licensed Reactor Operator will approximately 30 Radiation levels at the valve are approximately 15 R/hr. Four (4) individuals are available to perform the task: Worker A is a volunteer who is an experienced Licensed Reactor Operator, has previously received a planned special exposure at another facility, and has received a dose of 150 mR this year (TLD Badge No. 11111, SSN 111-11-1111). Worker B is a volunteer who is an experienced Licensed Reactor Operator, is a declared pregnant worker and has received a dose of 15 mR this year (TLD Badge No. 22222, SSN 222-22-2222). Worker C is a volunteer who is an experienced Licensed Reactor Operator and has received a dose of 1800 mR this year (TLD Badge No. 33333, SSN 333-33-3333). Worker D is a volunteer who is a new Licensed Reactor Operator that has received a dose of 500 mR this year (TLD Badge No. 44444, SSN 44-4444).

Initiating Cue: U(Operator's name), choose an individual to close valve ICS*MOV121, state the reason why that worker was chosen, estimate the expected radiation exposure and document your authorization for an Emergency Exposure." NRC 2010 SRO ADMIN JPM RC November 2010 NRC SRO ADMIN JPM EP Constellation Energy NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Event Classification and Notifications Revision:

NRC 2010 Task Number: N/A Approvals:

NA Exam Security I General Supervisor Date Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

_________(SRO) Trainer/Evaluator:

_____ Evaluation Method: Perform Evaluation Location:

Simulator or Other Designated Area Expected Completion Time: 25 min. Time Critical Task: Yes Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator Signature:

______________

_ Date:______ NRC SRO ADMIN JPM EP November 2010 Recommended Start Location: (Completion time based on the start location)

Classroom or Simulator.

Ensure sufficient copies of SM/ED Checklist Package are available Simulator Set-up: None Directions to the Instructor/Evaluator:

To be performed as an administrative JPM. Ideally this JPM should be performed in the Control Room or Simulator to provide adequate procedural resources.

If this JPM cannot be performed in one of these locations, then the complete SM/ED Checklist Package must be provided to the Candidate.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the Unit 1 SM, Security Supervisor, Communication Aid, and other personnel as necessary.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

Read Before Each Evaluated JPM Performance: This evaluated JPM is a measure of your ability to perform this task independently.

The Control Room Supervisor has determined that a verifier is not available and that additional!

concurrent verification will not be provided; therefore it should not be requested.

Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the additional/

concurrent verifier.

Notes to Instructor

/ Evaluator: Critical steps are identified as Pass/Fail.

All steps are sequenced critical unless denoted by a "e". During Evaluated JPM: Self-verification shall be demonstrated. During Training JPM: Self-verification shall be demonstrated. No other verification shall be demonstrated.

References:

EPIP-EPP-02, Classification Of Emergency Conditions at Unit 2 EPIP-EPP-18, Attachment 1 SM/ED Checklist EPIP-EPP-20, Emergency Notifications KIA 2.4.29(4.0), Knowledge of the Emergency Plan. NRC SRO ADMIN JPM EP November 2010 Tools and Equipment:

1.0 EPIP-EPP-02, ATTACHMENT 2, UNIT 2 EAL FLOWCHART 2.0 SM/ED Checklist Package Task Standard:

Classify the event within 15 minutes of the time that indications are available in the Control Room that an EAL has been exceeded and make all appropriate notifications within 15 minutes of the time the event is classified.

Initial Conditions:

1. You are the Shift Manager at NMP2. The STA is unavailable.

2. Unit 2 had been operating at 100% power. 3. Unit 1 is operating at full power. 4. The following conditions exist:

Rising drywell pressure caused the crew to insert a manual scram

MODE Switch failed to trip RPS, (Five) 5 minutes ago.

Depressing the Manual SCRAM pushbuttons caused all control rods to insert to 00, Four (4) minutes ago.

LOCA occurred causing loss of RPV level instrumentation.

RPV has been flooded to the Main Steam Lines.

Reserve Transformer "Au has faulted and is lost

No Release is in progress or anticipated Initiating Cue: "(Operator's name), Based on the above conditions determine the event classifications per EPIP-EPP-02 and complete steps 1 through 9.a of EPIP-EPP-18, Attachment 1, SM/ED Checklist".

This is a time critical activity.

Meteorological Data ! Wind Speed (30 ft) 5 mph I Wind Direction (30 ft) 60 0 I *:i Wind Speed (200 ft) 10 mph I Wind Direction (200 ft) 60 0 '.I Stability Class D

NRC SRO ADMIN JPM EP November 2010 Performance Steps Provide repeat back of initiating cue Evaluator acknowledge repeat back providing correction if necessary RECORD START TIME ____ Obtain a copy of EPIP-EPP-01 attachment 1 and Shift Manager emergency paperwork and review/utilize the correct section Enters EPIP-EPP-18, Attachment 1, SM/ED Checklist and completes Steps 1 through g.a Classifies and declares the emergency If candidate asks how long it has been since Reserve Transformer A was de-energized, report 15 minutes. Completes EPIP-EPP-18 attachment 1, figure 1 flowchart to determine evacuation and accountability requirements Evacuation determination is subjective and mayor may not be performed.

This will determine which path is taken on EPI P-EPP-18 Attachment 1 and which steps are completed on EPIP-EPP-18 Attachment

2. Calls the Communications Aides to the Control Rooms Role Play: Acknowledge communication NRC SRO ADMIN JPM EP I Standard Proper communications used for repeat back (GAP-OPS-01)

EPIP-EPP-01 attachment 1 and Shift Manager emergency paperwork is obtained Completes steps 1 thru g.a. of 18, as described in subsequent JPM steps Declares a Site Area Emergency within fifteen minutes of the JPM initial condition sheet being accepted in accordance with EAL 2.1.2 EXAMINER NOTE: Time difference below must be 15 minutes or less: JPM start time: ____ Time of Declaration:

_____ Completes Attachment as shown in KEY Proper communications used 01) I Grade SatlUnsat SatlUnsat SatlUnsat Pass/Fail SatlUnsat SatlUnsat November 2010 I Performance Steps 7. Fills out the ERO Notification System (ERONS) form I Standard Completes Attachment as shown in KEY I Grade SatiUnsat J. Calls Unit 1 SM to inform that ERONS form is coming and to get Unit 1 plant status Proper communications used 01) SatiUnsat Role Play: If asked about the status of Unit 1, report that Unit 1 is still operating at 100% power with no issues 9. Completes EPIP-EPP-18 attachment 2, Emergency Announcement Completes Attachment as shown in KEY SatiUnsat

10. Completes EPIP-EPP-20 Part 1 Notification Fact Sheet Completes Attachment as shown in KEY Part 1 Notification Fact Sheet Steps 3 thru 7 are Critical Steps Pass/Fail EXAMINER NOTE: Time difference must be 15 minutes or less: Time of Declaration (from JPM step 4): Time EPIP-EPP-20 Part 1 Notification Fact Sheet is complete:

TERMINATING CUE: Part 1 Notification Fact Sheet completed.

RECORD STOP TIME ____ NRC SRO ADMIN JPM EP November 2010 Initial Conditions:

1. You are the Shift Manager at NMP2. The STA is unavailable. Unit 2 had been operating at 100% power. Unit 1 is operating at full power. The following conditions exist: Rising drywell pressure caused the crew to insert a manual scram MODE Switch failed to trip RPS, (Five) 5 minutes ago. Depressing the Manual SCRAM pushbuttons caused all control rods to insert to 00, Four (4) minutes ago. LOCA occurred causing loss of RPV level instrumentation. RPV has been flooded to the Main Steam Lines. Reserve Transformer "A" has faulted and is lost No Release is in progress or anticipated Initiating Cue: "(Operator's name), Based on the above conditions determine the event classifications per EPIP-EPP-02 and complete steps 1 through g.a of EPP-18, Attachment 1, SM/ED Checklist".

This is a time critical activity.

Meteorological Data 5 m h 10 m h Stability D NRC SRO ADMIN JPM EP November 2010 NRC JPM RO C001 Constellation Energy Nuclear NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Verification of Active License Status Revision:

NRC 2010 Task Number: N/A Approvals:

NA Exam Security I General Supervisor Date Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

_____________(RO/SRO) Trainer/Evaluator:

___________

_ Evaluation Method: ---=...X"---_

Perform -----Simulate Evaluation Location:

___ Plant __---:....:X'--_

Simulator or Classroom Expected Completion Time: 10 minutes Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator Signature:

_____________

_ Date:______ NRC 2010 RO ADMIN JPM C001 November 2010 Recommended Start Location: (Completion time based on the start location)

Classroom Simulator Set-up: None Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM / CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM / CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the SM, CRO, and Plant Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically Repositioning of devices will be simulated by discussion and acknowledged by my Read Before Each Evaluated

...IPM This evaluated JPM is a measure of your ability to perform this task independently.

The Room Supervisor has determined that a verifier is not available and that additional/

verification will not be provided; therefore, it should not be Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor I Evaluator:

1. Critical steps are identified in grading areas Pass/Fail.

2. During Evaluated JPM:

Self verification shall be demonstrated.

3. During Training JPM:

Self verification shall be demonstrated.

References:

1. NUREG 1123,2.1.4,3.3

2. S-ODP-TQS-0101 Tools and NRC 2010 RO ADMIN JPM C001 November None Task Candidate determines that only RO #1 is qualified to stand the watch using the criteria contained in S-ODP-TQS-0101.

Initial Conditions: The plant is operating at 100% power. Today is January 1, 2011. You are the CRO. You must leave shift. The online Qualification Report is NOT available. Three replacement operators are available. Instructor to ask the operator for any questions.

Initiating cue: "(Operator's name), using the given information, determine which of the three operators, if any, are qualified to relieve you, in accordance with S-ODP-TQS-0101." Document your findings and the reasons for your findings on the given answer sheet." Examiner Note: Provide candidate with JPM attachments A and B. I Performance Steps I Grade Provide repeat back of initiating cue o Proper communications used for SatlUnsat repeat back (GAP-OPS-01)

Evaluator acknowledge repeat back providing correction if necessary RECORD START TIME ____ Obtain a copy of S-ODP-TQS-01 01 and 0 S-ODP-TQS-0101 obtained SatlUnsat review/utilize the correct section Note: See attached answer key Reviews RO #1 data and determines o Reviews RO #1 data SatlUnsat eligibility Determines RO #1 is qualified to Pass/Fail relieve the CRO Reviews RO #2 data and determines o Reviews RO #2 data SatlUnsat eligibility Determines RO #2 has not performed Pass/Fail enough hours in the past quarter as a licensed operator NRC 2010 RO ADMIN JPM November 2010 I Performance Steps I Standard Grade Cl Determines RO #2 is NOT qualified to relieve the CRO 5. Reviews RO #3 data and determines o Reviews RO #3 data SatiUnsat eligibility Cl Determines RO #3 does not have a SCBA Fit Test on file from the last Pass/Fail Cl year Determines RO #3 is NOT qualified to relieve the CRO Pass/Fail TERMINATING CUE: Candidate determines that only RO #1 is qualified to stand the watch using the criteria contained in S-ODP-TQS-01 01. RECORD STOP TIME ____ NRC 2010 RO ADMIN JPM C001 November 2010 Initial Conditions:

1. The plant is operating at 100% power. 2. Today is January 1, 2011. 3. You are the eRO. 4. You must leave shift. 5. The online Qualification Report is NOT available.

6. Three replacement operators are available.

Initiating cue: "(Operator's name), using the given information, determine which of the three operators, if any, are qualified to relieve you, in accordance with ODP-TQS-0101.

Document your findings and the reasons for your findings on the given answer sheet." NRC 2010 RO ADMIN JPM C001 November 2010

Attachment A -Data Sheet RO#2 10/21/10:

0700 -10/22/10:

0700 -10/23/10:

0700 -11/12/10:

0700 11/13/10:

0700 11/14/10:

0700 -I All requirements of TR-1.01-102 met 2/312010 3/18/2010 7/12/2009 1/27/2010 RO#3 11/2/10: 0630 -1830 11/3/10: 0630 -1830 11/4/10: 0630 -1830 11/5/10: 0630 -1830 12/24/10:

0630 -1830 12/25/10:

0630 -1830 All requirements of NMP-TR-1.01-102 met 8/16/2010 12/14/2009 12/10/2009 10/22/2010 Hours Licensed Duties in Last 10/28/10:

10/29/10:

10/30/10:

11/22/10:

11/23/10: RO#1 0630 -1830 0630 -1830 0630 -1830 0630 -1830 0630 -1830 Status Date of Last Date of Last SCBA Date of Most NRC Form 396 on Date of Most Respiratory on '--------All requirements of TR-1.01-102 2/10/2010 3/14/2010 8/22/2009 7/1/2010 NRC 2010 RO ADMIN JPM C001 November 2010 Attachment B -Answer Sheet i Qualified for Relief? (Yes/No) If No, what requirement is not being met, in accordance with 01? I RO#1 I I RO#2 RO#3 NRC 2010 RO ADMIN JPM C001 7 November 2010 Attachment C -Answer Key I ! Qualified for Relief? (Yes/No) If No, what requirement is not being met, in accordance with S-ODP-TQS-01 01? RO#1 Yes N/A RO#2 No Does not meet the required number of hours performing duties on a licensed operator for the last quarter RO#3 No Does not have an annual SCBA Fit test on file NRC 2010 RO ADMIN C001 November 2010 NRC RO ADMIN JPM C002 Constellation Energy NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Determine Core Thermal Power Revision:

NRC 2010 Task Number: NA Approvals:

NA Exam Security I General Superv' General Supervisor Date Operations Training (Designee)

Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

______________

{RO) Trainer/Evaluator:

____________

_ Evaluation Method: ----'X"-"--_Perform

---Simulate Evaluation Location:

___Plant ___Simulator X Classroom Expected Completion Time: 15 Min. Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ .JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluators Signature:

____________

_ Date:______ NRC RO ADMIN JPM C002 November 2010 Recommended Start Location: (Completion time based on the start location)

Any appropriate location with the required Reference Material.

Simulator Set-up (if required):

None Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM / CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM I CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this ..JPM, I will function as the SM, CRO, and Plant Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically manipulated.

Repositioning of devices will be simulated by discussion and acknowledged by my cues. Read Before Each Evaluated JPM Performance:

This evaluated JPM is a measure of your ability to perform this task independently.

The Control Room Supervisor has determined that a verifier is not available and that additional!

concurrent verification will not be provided; therefore, it should not be requested.

Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor I Evaluator: Critical steps are identified in grading areas as Pass/Fail.

All steps are sequenced critical unless denoted by a U e ". During Evaluated JPM: e Self verification shall be demonstrated. During Training JPM: Self verification shall be demonstrated. {Additional/Concurrent/No other) verification shall be demonstrated.

NRC RO ADMIN .IPM November 2010

References:

N2-REP-11, Independent Methods of Determining Core Thermal Power NUREG KIA General Knowledges and Abilities 2.1.19(3.0)

Tools and Equipment: Calculator

2. 00-3, with % Core Thermal Power = Task Core thermal power correctly calculated in accordance with N2-REP-11, Attachment Candidate determines that the calculated power is not within 2% limit specified in procedure and notifies SM and Initial The plant has been operating at steady-state power for greater than 8 hours9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months . MSR reheat steam is NOT optimized. Turbine bypass valves are closed. SM permission has been granted to perform this procedure.

Initiating Cues: "(Operator's name), determine core thermal power using turbine first stage pressure accordance with N2-REP-11.

Any steps requiring an Independent Verification will completed by another operator at the completion of the

! Performance Steps Grade Provide repeat back of initiating cue. CJ Proper communications used for Sat/Unsat Evaluator Acknowledge repeat back repeat back (GAP-OPS-011) providing correction if necessary.

RECORD START TIME ____ Obtain a copy of the reference CJ N2-REP-11 obtained.

procedure and review/utilize the correct

Precautions

&Limitations Sat/Unsat section of the procedure.

reviewed.

Attachment 3

Evaluator:

Provide candidate with blank copy of NRC RO ADMIN JPM November 2010 3 Performance Steps Complete Preliminaries Section of 11 r Attachment 3 for the following: Verifying all turbine bypass valves are fully closed. Verifying MSR reheat steam is NOT optimized. Verify reactor is operating in a steady state condition with core power level constant for the current control rod pattern and core flow. Note: Candidate may obtain SM permission; and/or notify the CRO of procedure performance. Record data on N2-REP-11, Attachment

3. Evaluator:

Provide candidate a copy of JPM Attachment

1. Obtain Plant Process Computer Program OD-3, Option 2 printout.

Evaluator:

Provide candidate a copy of JPM Attachment

2. Calculate core thermal power. Indicate if core thermal power values agree within +/- 2%. NRC RO ADMIN JPM C002 Grade Step completed using JPM Initial SatlUnsat Conditions. Step completed using JPM Initial SatlUnsat Conditions. Step completed using JPM Initial SatlUnsat Conditions. Proper communications used SatlUnsat Data correctly entered on Attachment SatlUnsat Obtains value from JPM Attachment SatlUnsat Core thermal power calculations Pass/Fail completed as follows: % Core Thermal Power based computer points = [(.12464 X 700) + 12.6794] X (.98 + .98)/2= 97.929 (97.93) % Core Thermal Power from 3 printout = Determines core thermal power Pass/Fail values do NOT agree within +/- 2% (99.99 -97.93 = 2.06). November 2010 4 Performance Steps Grade Immediately notifies SM and Reactor o SM and Reactor Engineering Pass/Fail Engineering Supervisor that Core Supervisor notified that Core Thermal Thermal Power determined using turbine Power determined using turbine first first stage pressure does NOT agree stage pressure does NOT agree within 2%. within 2%. Terminating Cue: Core thermal power calculated using N2-REP-11, Attachment

3. RECORD STOP TIME ____ NRC RO ADMIN JPM November 2010 5 Initial Conditions:

1. The plant has been operating at steady-state power for greater than 8 hours9.259259e-5 days 0.00222 hours 1.322751e-5 weeks 3.044e-6 months . 2. MSR reheat steam is NOT optimized

3. Turbine bypass valves are closed. 4. SM permission has been granted to perform this procedure.

Initiating Cues: "(Operator's name), determine core thermal power using turbine first stage pressure in accordance with N2-REP-11.

Any steps requiring an Independent Verification will be completed by another operator at the completion of the procedure." NRC RO ADMIN JPIVI C002 November 2010 6 JPM Attachment 1 N2-REP-11 Data Sheet Computer Point Value I Turbine First Stage Pressure 700 pSia i (MSSPA07) i FW A Correction Factor (FWSFE1 02) i 0.98 I ! . FW B Correction Factor (FWSFE103)

I 1 0.98 NRC RO ADMIN JPM C002 November 2010 7 JPM Attachment 2 003 -Option 2 00-3 Core Thermal Power and APRM Calibration TODAY 09:50:02 Nine Mile Point 2 GMWE CMWT WT WTSUB WD WT FLAG IREC ROD LIN 1182.52 3466.66 97.09 97.86 30.54 2.00 0 107.53 I I I I I I I I PR RWL OPCM WFW HFW WO OHS CAEQ CAQA 1034.6 185.54 15.44 14.93 400.8 525.4 22.80 .12 .15 1-A 2-B 3-C 4-0 RAP 100.01 100.04 99.99 100.03 AGAP 1.0 1.0 1.0 1.0 I NRC RO ADMIN JPM C002 November 2010 8 NRCJPM RO EC Constellation Energy Nuclear NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Prepare a Tagout for TBCLCW Pump P1 B Revision:

NRC 2010 Task Number: N/A Approvals:

NA Exam Security I General Supervi r:; General Supervisor Date Operations Training (Designee)

Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

______________(RO) Trainer/Evaluator:

___________

_ Evaluation Method: --=...X.:--_

Perform _____ Simulate Evaluation Location:

___ Plant __--.:...!X'--_

Simulator or Classroom Expected Completion Time: 30 minutes Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluators Signature:

____________

_ Date:______ NRC 2010 RO ADMIN JPM EC November 2010 Recommended Start Location: (Completion time based on the start location)

Classroom Simulator Set-up (if required):

N!A Directions to the I nstructor!Evaluator:

Prior to performance of this JPM, obtain SM ! CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM ! CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the SM, CRO, and Plant Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically Repositioning of devices will be simulated by discussion and acknowledged by my Read Before Each Evaluated J PM This evaluated JPM is a measure of your ability to perform this task independently.

The Room Supervisor has determined that a verifier is not available and that additional!

verification will not be provided; therefore, it should not be Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor!

Evaluator: Critical steps are identified in grading areas Pass/Fail.

All steps are sequenced critical unless denoted by a".". During Evaluated JPM: Self verification shall be demonstrated. During Training JPM:

Self verification shall be demonstrated.

References:

NUREG 1123,2.2.13, R04.1 CNG-OP-1.01-1007 P&IDs 14A thru 14F available Electrical Prints -ESK 5CCS01 (02,03), available ELU-14 -Electrical Lineup OR EE-1L (available)

6. N2-0P-14 NRC 2010 RO ADMIN JPM EC November 2010 Tools and Equipment:

None Task Standard:

Identify the isolations required to tag out TBCLCW Pump 2CCS-P1 B for the pump packing replacement.

Initial Conditions: The plant is operating at 100% power. TBCLCW pumps P1A and P1 C are operating. TBCLCW pump P1 B is secured. Maintenance is required to repack 2CCS-P1 B eSOMs is unavailable.

6. Ask the operator for any questions.

Initiating cue: "(Operator's name), identify the components required to tagout TBCLCW Pump P1 B for the pump packing replacement.

Record the required components, tag type, component positions and tagging sequence on the handout provided." Performance Steps Provides repeat back of initiating cue Evaluator acknowledge repeat back providing correction if necessary RECORD START TIME ____ Obtains a copy of the reference procedure and reviews/utilizes the correct section Obtains and references appropriate drawings and/or procedures to determine isolations Records required isolations.

Note: Due to unavailability of eSOMs and other electronic databases, exact component IDs, names, and tagging positions may vary. Examiner Note: The sequence must be electrical first (control switch, fuses), valve isolations second (suction, discharge) and vent and drain third. NRC 2010 RO ADMIN JPM EC Standard Proper communications used for repeat back (GAP-OPS-01) CNG-OP-1.01-1007 obtained as necessary Obtains and references, as required: P&IDs 14A thru 14F EWOs ESK 5CCS01 (02,03) N2-0P-14 ELU-14 or EE-1 L Identifies the following component isolations, tag type, component positions and tagging sequence on the handout PMP 1 B CSS-P1 B, TBCLCW Pump 2CSS-P1B:

1. Control Switch in pull-to-Iock

2. Reference or Danger Tag -3 Grade SatlUnsat SatlUnsatl NA SatlUnsat SatlUnsat November 2010 I Performance Steps Standard Grade The candidate may # them 1, 2, 3, 4, 5, 6 or 3. Sequence #1 or #2 1,1,2,2,3,3 2NNS-SWG013-8, 2CCS-P1 B Power Pass/Fail Supply Trip Fuses: 1. Trip Fuses pulled 2. Danger Tag 3. Sequence #1 or #2 AND/OR AND/OR 2NNS-SWG013-8 Breaker for Pass/Fail P1B: Breaker Open & Racked out/handle elevated Danger Tag Sequence #1 or #2 2CCSV303B

-TBCLC Pump P'I B Pass/Fail Discharge Stop Check Valve: Closed Danger Tag Sequence #3 or #4 2CCSV1 B -TBCLC Pump P1 B Pass/Fail Suction Isolation Valve: Closed Danger Tag Sequence #3 or #4 2CCSV307B

-TBCLC Pump P1 B Pass/Fail Casing Vent Valve: Uncapped and Open Danger Tag Sequence #5 or #6 2CCSV6B -TBCLC Pump P1 B Pass/Fail Casing Drain Valve: Uncapped and Open Danger Tag Sequence #5 or #6 NRC 2010 RO ADMIN JPM November 2010 Terminating Cue: Isolations for TBCLCW Pump P1 B have been identified and recorded on the handout provided RECORD STOP TIME ____ KEY Component Tag Type Sequence**

Component Description Position/Configuration PMP 1 B CSS-P1 B, TBCLCW Pump 2CSS-Reference or Danger Sequence #1 or #2 Control Switch in P1B: to-lock 2NNS-SWG013-8, Danger Sequence #1 or #2 Trip Fuses 2CCS-P1 B Supply Trip AND/OR AND/OR 2NNS-SWG013-8 Danger Breaker Open Breaker for 2CCS-P1 B: Racked 2CCSV303B

-TBCLC Danger Sequence #3 or #4 Pump P1 B Stop Check 2CCSV1 B -TBCLC I Danger Sequence #3 or #4 Pump P1 B Isolation I i 2CCSV307B

-TBCLC Danger Sequence #5 or #6 Uncapped and Open I Pump P1 B Casing I I 2CCSV6B -TBCLC Danger Sequence #5 or #6 Uncapped and Open i Pump P1 B Drain **Examiner Note: The sequence must be electrical first (control switch, fuses, breaker), valve isolations second (suction, discharge) and vent and drain third. The candidate may # them 1, 2, 3, 4, 5, 6 or 1, 1, 2, 2, 3, 3 NRC 2010 RO ADMIN JPM EC November 2010 Component Tag Type Sequence I Component i Description Position/Configuration

!1. i I 2. i 3. ! I 4. i 5. ! 6. I 8. i 9. 10 . !

11 i i 12. I 13. i 14. i 15. !16. I i I NRC 2010 RO ADMIN JPM EC November 2010 Initial Conditions:

1. The plant is operating at 100% power. 2. TBCLCW pumps P1 A and P1 C are operating.

3. TBCLCW pump P1 B is secured. 4. Maintenance is required to repack 2CCS-P1 B 5. eSOMs is unavailable.

Initiating cue: U(Operator's name), identify the components required to tagout TBCLCW Pump P1 B for the pump packing replacement.

Record the required components, tag type, component positions and tagging sequence on the handout provided." NRC 2010 RO ADMIN JPM EC November 2010 NRC JPM RO EP Constellation Energy Nuclear NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Perform Actions for External Security Threats Revision:

NRC 2010 Task Number: N/A Approvals:

NA Exam Security I General Supervisor General Supervisor Date Operations Training (Designee)

Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

______________(RO) Trainer/Evaluator:

___________

_ Evaluation Method:

Perform _____ Simulate Evaluation Location:

___ Plant __--=:....:x'---_

Simulator or Classroom Expected Completion Time: 15 minutes Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: ____ Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluators Signature:

____________

_ Date:______ NRC 2010 RO ADMIN JPM EP November 2010 Recommended Start Location: (Completion time based on the start location)

Simulator Simulator Set-up (if required):

N/A Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM ! CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM ! CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the SM, CRO, and Plant Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically Repositioning of devices will be simulated by discussion and acknowledged by my Read Before Each Evaluated JPM This evaluated JPM is a measure of your ability to perform this task independently.

The Room Supervisor has determined that a verifier is not available and that additional!

verification will not be provided; therefore, it should not be Read Before Each Training .JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor I Evaluator:

1. Critical steps are identified in grading areas Pass/Fail.

2. During Evaluated JPM:

Self verification shall be demonstrated.

3. During Training JPM:

Self verification shall be demonstrated.

References:

1. NUREG 1123, 2.4.28, RO 3.2 2. EPIP-EPP-10 Tools and Equipment:

None NRC 2010 RO ADMIN JPM EP November 2010 Task Standard:

Perform required actions for an external security threat per EPIP-EPP-10, Attachment

2. Initial Conditions: The plant is operating at 100% power. You are the CRO. The NRC calls on the ENS line and informs you of the following: NORAD has reported that two US Airways 737 aircraft have been hijacked from Hancock International Airport in Syracuse, New York. One is headed southeast in the direction of the Indian Point site and one is headed north in the direction of the Fitzpatrick and Nine Mile Point site. The event is classified as a credible, probable airborne threat. Instructor to ask the operator for any questions.

Initiating cue: "(Operator's name), perform actions in response to this security threat in accordance with EPP-10 attachment 2." Performance Steps Grade Provides repeat back of initiating cue a Proper communications used for SatlUnsat repeat back (GAP-OPS-01)

Evaluator acknowledge repeat back providing correction if necessary RECORD START TIME ____ Obtains a copy of the reference a EPIP-EPP-10 attachment 2 obtained SatlUnsat procedure and reviews/utilizes the correct section Once the candidate locates EPP-10 attachment 2, the examiner may supply an extra copy to the candidate for use during the remainder of the JPM Notifies Shift Manager of security event a Proper communications used (GAP-Pass/Fail OPS-01) Checks plant parameters o Observes major plant parameters SatlUnsat using control room instrumentation (ex. Reactor power, pressure and level, Containment conditions)

NRC 2010 RO ADMIN JPM EP -3 November 2010 Performance Steps Standard Grade 5. Notifies Security Site Supervisor o Proper communications used Pass/Fail OPS-01) Note: Security Site Supervisor may be contacted by Gaitronics page or by calling x5222 or x2591 6. Initiates any Operating, Special 1:1 Proper communications used (GAP* Sat/Unsat Operating or EOPs required OPS-01) Cue: Inform that other operators are executing the required Operating, Special Operating and Emergency Operating Procedures

7. As directed by Shift Manager, makes 0 Makes plant announcement in announcements accordance with EPIP-EPP-10 attachment 6: Cue: As Shift Manager, provide EPP-10 Attachment 6, a. Places GAltronics in Merge Pass/Fail Imminent/Probable Aircraft Attack Announcement ( ..IPM Handout #1) b. Sounds Evacuation Alarm for 5 Pass/Fail seconds Note: If candidate begins to broadcast

c. Announces:

Pass/Fail an announcement, Examiner should ask candidate not to Attention All Plant Personnel, this broadcast over the speakers and (is a drill I is an actual emergency) just to the examiner.

Aircraft Impact Imminent.

Evacuate the protected area immediately.

Report directly to the Learning Center or P-Building.

I repeat, this (is a drill I is an actual emergency)

d. Repeats Alarm and Announcement Sat/Unsat

e. Leaves GAltronics in merge Sat/Unsat NRC 2010 RO ADMIN JPM EP -4 November 2010 Performance Steps When Security Contingency Event no longer exists, makes a termination announcement in accordance with EPP-18 As Shift Manager, report that Security Contingency Event no longer exists and provide 18 attachment 7, Emergency Termination Announcement (JPM Handout #2) NOTE: If candidate begins to broadcast an announcement, Examiner should ask candidate not to broadcast over the speakers and just to the examiner.

Standard Grade o Makes plant announcement in accordance with EPIP-EPP-18 attachment 7: a. Sounds Station Alarm for 10 seconds SatlUnsat

b. Announces:

SatlUnsat Attention.

Attention all personnel.

The security event at Nine Mile Point Unit 1 and 2 has been terminated.

I repeat, the security event has been terminated

c. Repeats alarm and announcement SatlUnsat

d. Removes GAltronics from merge SatlUnsat Terminating Cue: Emergency Termination Announcement has been made. RECORD STOP TIME ____ NRC 2010 RO ADMIN JPM EP -5 November 2010 Initial Conditions:

1. The plant is operating at 100% power. You are the CRO. The NRC calls on the ENS line and informs you of the following: NORAD has reported that two US Airways 737 aircraft have been hijacked from Hancock International Airport in Syracuse, New York. One is headed southeast in the direction of the Indian Point site and one is headed north in the direction of the Fitzpatrick and Nine Mile Point site. The event is classified as a credible, probable airborne threat. Initiating cue: "(Operator's name), perform actions in response to this security threat in accordance with EPIP-EPP-10 attachment 2." When making plant announcements, simulate all actions with the GAltronics and provide announcement to the examiner only (i.e. do NOT broadcast over speakers).

NRC 2010 RO ADMIN EP -6 November 2010 ATIACHMENTS Today Date: Now IMMINENTfPROBABLE AIRCRAFT ArrACK ANNOUNCEMENT Instructions:

1. Place GAltronics In Merge 2. Sound Evacuation Alarm for 5 Seconds Announce, Attention AU Plant Personnel, this (is a drill IS an actual emergenc Aircraft impact Imminent Evacuate the protecrea area Immediately.

Report directly to the Learning Center or i repeat.. this {is a driif is an actual emergengxp

4. Repeat Alarm and Announcement.

5. Leave GAltronics in merge for the duration of the event. 6. Upon completion retum this attachment to the EP Dept. Page EPIP-EPP-10 Rev 17 NRC 2010 RO ADMIN JPM EP -November 2010 ACTIVATION AND DIRECTION OF THE EMERGENCY PLANS EPlp*EPp*18 Revision 01900 Page 190121 Page 1 of 1 Attachment 7, Emergency Termination Announcement Date: Today TIme: Now Emergency Termination (As requested by the SM/EO or

1. Place GAltronics in Merge Sound Station Alarm for 10 Seconds Announce. "Attention.

Attention all The condition at Nine Mile ).<:2: Unit 1 has been terminated.

);( Unit 2 has been terminated. (Provide further instructions as necessary) J repeat, the ____s_e_,c_u_r_i_t..::.y

____

condition has been terminated. Repeat Alarm and Announcement. Remove GAltronics from merge. Upon completion retum this attachment to the EP Dept. [N0306J NRC 2010 RO ADMIN JPM EP November 2010 NRC JPM Constellation Energy NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Initiate Division I H2I02 Monitoring to Monitor Suppression Chamber, Post LOCA Revision:

NRC 2010 Task Number: NA NA Exam Security General Superviso General Supervisor Date Operations Training (Designee)

Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

_____________(RO/SRO) Trainer/Evaluator:

___________

_ Evaluation Method:

_____Simulate Evaluation Location:

___Plant __--"-'X'--_Simulator Expected Completion Time: 20 min. Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Time: Completion Time: ____ JPM Overall Rating: Pass Fail NOTE: A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator's Signature:

____________

_ Date:______ NRC 2010 JPM S-1 November 2010 Recommended Start Location: (Completion time based on the start location)

Simulator Simulator Set-up (if required):

IC-171 Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM / CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM / CRO permission.

Directions to Operators:

Read Before Every JPM Performance:

For the performance of this JPM, I will function as the SM, CRO, and Auxiliary Operators.

Prior to providing direction to perform this task, I will provide you with the initial conditions and answer any questions.

During task performance, I will identify the steps to be simulated, or discuss and provide cues as necessary.

With the exception of accessing panels, NO plant equipment will be physically manipulated.

Repositioning of devices will be simulated by discussion and acknowledged by my cues. Read Before Each Evaluated JPM This evaluated JPM is a measure of your ability to perform this task independently. Control Room Supervisor has determined that a verifier is not available and that concurrent verification will not be provided; therefore, it should not be Read Before Each Training JPM Performance:

During this Training JPM, applicable methods of verification are expected to be used. Therefore, either another individual or I will act as the independent/peer verifier.

Notes to Instructor

/ Evaluator: Critical steps are identified in grading areas as Pass/Fail.

All steps are sequenced critical unless denoted by a".". During Evaluated JPM: Self-verification shall be demonstrated. During Training JPM: Self-verification shall be demonstrated. No other verification shall be demonstrated.

NRC 2010 JPM 8-1 -2 November 2010 i

References:

N2-0P-82, Revision 00601 KIA 223001 A4.04 3.5/3.6, A4.05 3.6/3.6 Tools and Equipment:

Keys Task Standard:

H202 Analyzers ON and sampling from the suppression chamber Initial Conditions:

The plant is shutdown following a LOCA Initiating Cues: Perform a post LOCA restart of 2CMS*CABi0A per N2-0P-82, Section H.i.0, and using Division I CMS H202 Monitor, sample the Suppression Chamber per Section F.1.0. Performance Ste s Grade Provide repeat back of initiating o Proper communications used for SatlUnsat cue. Evaluator Acknowledge repeat back (GAP-OPS-01) repeat back providing correction if necessary RECORD START TIME Obtain a copy of the reference o N2-0P-82 obtained.

Precautions

& SatlUnsat procedure and review/utilize the Limitations reviewed.

correct section. Obtain SM/CRS permission to o Obtains SM/CRS permission to SatlUnsat restart 2CMS*CAB10A(B) restart 2CMS*CAB 1 OA Give SM/CRS when NRC 2010 JPM 8-1 -November 2010 PRIOR to overriding the LOCA 0 Prior to overriding the LOCA SatlUnsat isolation signal, notify Radiation isolation signal, notifies Radiation Protection of the intent to restart Protection of the intent to restart 2CMS*CAB10A(B)

AND that 2CMS*CAB10A AND that radiological conditions could radiological conditions could change. change. CUE: As RP, acknowledge. Place the following keylock 0 Places the following keylock PASS/FAIL switches to OVERRIDE:

switches to OVERRIDE: ISOL VLV OVERRIDE on

ISOL VLV OVERRIDE 2CEC*PNL873 ISOL VLV OVERRIDE on

ISOL VLV OVERRIDE 2CEC*PNL875 At 2CEC*PNL873, open the 0 OPENS the following valves: PASS/FAIL following valves: 2CMS*SOV60A(B),

2CMS*SOV60A, CONTMT CONTMT ATM MON DW MON DW OUTBD OUTBD ISOL SUPPLY 2CMS*SOV62A(B) ,

2CMS*SOV62A, CONTMT CONTMT ATM MON DW MON DW OUTBD OUTBD ISOL RETURN At 2CEC*PNL875, open the 0 OPENS the following valves: PASS/FAIL following valves 2CMS*SOV61A(B),

2CMS*SOV61A, CONTMT ATM MON DW ATM MON DW INBD INBD ISOL SUPPL Y 2CMS*SOV63A(B),

2CMS*SOV63A, CONTMT CONTMT ATM MON DW MON DW INBD ISOL INBD ISOL Direct Radiation Protection to 0 Directs Radiation Protection to place Sat/Unsat place 2CMS*CAB10A(B) in 2CMS*CAB10A in service. service. CUE: Inform operator that 2CMS*CAB10A is in service. Verify 2CMS*CAB1 OA(B) is in 0 Verifies 2CMS*CAB10A is in service SatlUnsat service AND notify the SM/CRS. AI\ID notifies the SM/CRS. CUE: As SM/CRS, acknowledge.

NRC 2010 JPM 8-1 November 2010 I Performance I Standard EVALUATOR'S NOTE: Applicant returns to Section F.1.0 to sample from Path 4 (Suppression Chamber) reference.

10. Placing H2/02 Analyzer in o Operator reviews the steps. Panel Service: 2CEC*PNL873 will be used. This Subsection is written both divisions with Division components in Actions in this are performed 2CEC*PNL873(875) otherwise Position 4 lines up Suppression sample stream. It is used as directed Performance of Subsection may be by the EOPs. Changes this Subsection renumbering) are required be reviewed by this Control Room indication H2 and 02 will be less 0% if the analyzer is calibration OR condition.

The only to determine if the unit is self-calor in TROUBLE the indicating lights on remote 2CMS*PNL73A(B)

(240 Aux Bay). Control indication will return self-calibration is 30 i Grade SatlUnsat NRC 2010 JPM S-1 November 2010 I Performance Steps I Grade 11. If required defeat LOCA 0 Refers to Section H.2.0 SatiUnsat per Section H.2.0

12. If LOCA isolation signal is o Operator notes that this step was Sat/Unsat present, using PA 235 Key, performed earlier in the JPM (step place the following keylock 5) and verifies switches in switches to OVERRIDE:

OVERRIDE ISOL VLV OVERRIDE

13. At 2CEC*PNL873(875), place o At 2CEC*PNL873, places the Pass/Fail the Division 1(11) SAMPLE PATH Division I SAMPLE PATH SELECTOR SWITCH in the SELECTOR SWITCH in the RESET position RESET position.

14. Return to Section F.1.0 to o Returns to section F.1.0 SatiUnsat H202 Analyzers in service NOTE: IF a LOCA Isolation occurs while the Analyzer is in service, it will cause the analyzer to trip. Placing the H2/02 ANALYZER PMP switch to STANDBY will reset the trip logic. 15. Verify the H2/02 o Verifies the 2CMS*P2A, H2/02 SatiUnsat ANALYZER PMP, in STANDBY. ANALYZER PMP, in STANDBY. Establish a sample flowpath by o Establishes a sample flowpath by PASS/FAIL placing the SAMPLE PATH placing the SAMPLE PATH SELECTOR SWITCH to SELECTOR SWITCH to Position 4 Position 1, 2 or 3 (Drywell)

OR (Suppression Chamber) 4 (Suppression Chamber) as directed by SM/CRS. 17. Verify EITHER a Drywell o Verifies a Suppression Suppression Chamber sample sample flow path flow path exists, as Suppression chamber flow 2CMS*SOV26A(B),

2CMS*SOV26A, SAMPLE PASS/FAIL SAMPLE FROM SUPPR FROM SUPPR CHAM CHAM INBOARD ISOL VLV, INBOARD ISOL VLV, Open Open NRC 2010 JPM S-1 November 2010 I Performance Steps 17. (cant) Suppression sample flow 2CMS*SOV26C(D) , SAMPLE FROM SUPPR CHAM OUTBOARD ISOL VLV, Open 2CMS*SOV34A(B), SUPPR CHAM SAMPLE RTN INBOARD ISOL VLV, Open 2CMS*SOV35A(B).

SUPPR CHAM SAMPLE RTN OUTBOARD ISOL VLV, Open 2CMS*SOV64A(B), H2/02 ANALYZER INLET VLV, Open 2CMS*SOV65A{B), H2/02 ANALYZER OUTLET VLV, Open Standard 2CMS*SOV26C, SAMPLE FROM SUPPR CHAM OUTBOARD ISOL VLV, Open 2CMS*SOV34A, SUPPR CHAM SAMPLE RTN INBOARD ISOL VLV, Open 2CMS*SOV35A, SUPPR CHAM SAMPLE RTN OUTBOARD ISOL VLV, Open 2CMS*SOV64A, H2/02 ANALYZER INLET VLV, Open 2CMS*SOV65A, H2/02 ANALYZER OUTLET VLV, Open Alarms for High 02 concentrations are expected for first 20 minutes until analyzer warm up period is complete. Allow 30 minutes for system stabilization after placing the 2CMS*P2A(B), H2I02 ANALYZER PMP to ANALYZE. It takes approximately 6 minutes to receive and accurately read the sample by the H2I02 Analyzer, when changing sample locations.

CUE: Inform candidate that 30 minutes has elapsed. 18. Place the 2CMS*P2A(B), H2/02 ANALYZER PMP switch to ANALYZE. 19. Verify 2CMS*P2A(B), Sample Pump GREEN light goes OUT and RED light is LIT. TERMINATING CUE: RECORD STOP TIME __ NRC 2010 S-1 D Places the 2CMS*P2A, H2/02 ANALYZER PMP switch to ANALYZE. D Verifies 2CMS*P2A, Sample Pump GREEN light goes OUT and RED light is LIT. Analyzer RED light ON. Sampling from the Suppression Chamber. -7 November 2010 Grade PASS/FAIL PASS/FAIL SatlUnsat SatlUnsat SatlUnsat PASS/FAIL SatlUnsat TURNOVER INITIAL The plant is shutdown following a LOCA. CONDITIONS:

INITIATING Perform a post LOCA restart of 2CMS*CAB10A per N2-0P-82, Section H.1.0, and using Division I CMS H202 Monitor, sample the Suppression Chamber per Section F.1.0. NRC 2010 JPM 8 November 2010 NRC JPM 5-2 Constellation Energy NINE MILE POINT UNIT OPERATOR JOB PERFORMANCE Title: Add Air to a De-Inerted Drywell Revision:

NRC 2010 Task Number: NA Approvals:

NA Exam Security I General Supervisor Date Operations (Designee)

NA Exam Security I Configuration Control Date Performer:

______________(RO/SRO) Trainer/Evaluator:

____________

_ Evaluation Method: ---=X'-!...-_Perform

_____Simulate Evaluation Location:

___Plant __.-;..:X,--_Simulator Expected Completion Time: 20 min_ Time Critical Task: No Alternate Path Task: No Start Time: ____ Stop Completion JPM Overall Rating: Pass Fail A JPM overall rating of fail shall be given if any critical step is graded as fail. Any grade of unsat or individual competency area unsat requires a comment. Comments:

Evaluator's Signature:

____________

_ NRC 2010 JPM S-2 -1 November 2010 Recommended Start Location: (Completion time based on the start location)

Simulator Simulator Set-up (if required):

IC-172 Remote PC21, CPS-V26 Purge Fan Discharge Directions to the Instructor/Evaluator:

Prior to performance of this JPM, obtain SM ! CRO general permission to open equipment cabinets and inspection covers. If opening the equipment cabinet or inspection cover will affect Tech. Spec. Operability, operational status, or the effects are unknown, obtain specific SM / CRO permission.