|
|
Line 17: |
Line 17: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:** | | {{#Wiki_filter:Attachment 3 e LR*-N970619 |
| * Attachment 3 e LR*-N970619 LCR S96-lO
| | ** REACiOR COOLANT SYSTEM PP.IP.ARY COOLANT SYSTEM PRESSURE ISOLATION OP::AATION VAL\'~S LI~lT!NG |
| * REACiOR COOLANT SYSTEM PP.IP.ARY COOLANT SYSTEM PRESSURE ISOLATION OP::AATION 3.4.5.3 ' | | ' |
| * f'ia,iset2T P.eactor System Pressure Va1ves sha11 be operat ona | | LCR S96-lO * |
| * oPe/2ASLe | | * f'ia,iset2T 3.4.5.3 P.eactor Cooi~nt System Pressure Isoi~tion Va1ves sha11 be operat ona * ~lt\ce w;~ oPe/2ASLe |
| : a. The integrity of a11 pressure isolation valves 1isted in Table 4.4-4 sha11 have been demonstrated, except as specified in "b". Valve leakage shall not exceed the amounts indicated. | | : a. The integrity of a11 pressure isolation valves 1isted in Table 4.4-4 sha11 have been demonstrated, except as specified in "b". Valve leakage shall not exceed the amounts indicated. |
| : b. In t e event that the integrity of any ?ressure isolation va1ve specified in Table 4.4-' cannot be _demonstrated. | | : b. In t e event that the integrity of any ?ressure isolation va1ve specified in Table 4.4-' cannot be _demonstrated. |
| reactor operation may continue, provided that at . . 1 east two valves in each high: pressure 1 i ne havina a functi ona i valve are in, and remain in, the mode corresponcino to isolated condition.laJ | | reactor operation may continue, provided that at . |
| * | | .1 east two valves in each high: pressure 1 i ne havina a non-functi ona i valve are in, and remain in, the mode corresponcino to th~ isolated condition.laJ * * ~ |
| * MODES , I 2; 3, and 4. ACTION: \If neither Condition "a" nor "b 11 can be met. an orderly shutdown sha11 be initiated within one hour and the reactor shal 1 be in at least HOT STANC6Y within 6 hours and in COLD within the following 30 hours.
| | ~.i::iuc~:!LITY: MODES , I 2; 3, and 4. |
| LL.A.NCE ?.::OU! REMENTS 4.4.6.3 a.
| | * ACTION: |
| leakagi.testing(b) on each valve 1Jsted in Table 4.4-4 shall be | | \ |
| | su~v::r LL.A.NCE If neither Condition "a" nor "b 11 can be met. an orderly shutdown sha11 be initiated within one hour and the reactor shal 1 be in at least HOT STANC6Y within 6 hours and in COLD SHUTOO~N within the following 30 hours. |
| | ?.::OU! REMENTS 4.4.6.3 a. Periodi~ leakagi.testing(b) on each valve 1Jsted in Table 4.4-4 shall be -accom~1ished! |
| : 1. Each time the plant is placed in COLO SHUTDOWN conditicn for refueling. | | : 1. Each time the plant is placed in COLO SHUTDOWN conditicn for refueling. |
| : 2. Each the plant is p1aced in COLO condition for 72 hours if testing has not' been accomplished in the preced5ng 12 months. Motor operated valves shall be placed in the closed position and power supplies deenergized. | | : 2. Each ti~e the plant is p1aced in COLO SHUTOO~N condition for 72 hours if testing has not' been accomplished in the preced5ng 12 months. |
| b io satisfy ALAO.A l"'equirements. | | Motor operated valves shall be placed in the closed position and power supplies deenergized. |
| 1 eakage may be measured indirectly (as from the of pressure indicatol"'s) if accom?lished in accordance with approved procedures and by showing tnat the*
| | b io satisfy ALAO.A l"'equirements. 1eakage may be measured indirectly (as from the perfor~ance of pressure indicatol"'s) if accom?lished in accordance with approved procedures and su?~orted by co~putations showing tnat the* |
| is capable of de:.;onstrating valve comp1iance with the leakage criteria. | | ~ethod is capable of de:.;onstrating valve comp1iance with the leakage criteria. |
| --------- | | ------ --- ~-...-.., |
| 3/4 4-16a Order dated April 20, 1981 | | 3/4 4-16a Order dated April 20, 1981 |
| * *
| | |
| * Attachment
| | Attachment e. LR-N970619 LCR S96"-10 ?\!. |
| : e. LR-N970619 LCR S96"-10 ?\!. 3. Prior to returning the va1ve to maintenance, re?air, or work on "the va1ve
| | : 3. Prior to returning the va1ve to serv~ce foll~wing |
| * 4. ihe provision of specification 4.0.4 is not applicable for entry into Mode 3 or .4. b. Whenever integrity of a press>>.ire iso1 ation valve i.s.ted in Table 4.4-4 cannot be demonstrated, the integrity of remiining ialve in each high pressure line having a leaking valve shall be determined and recorded daily. In addition, the position of one other valve located in the high pressure line shall be recorded daily
| | * maintenance, re?air, or rep1ac~ent work on "the va1ve * |
| * 3/ 4 4-1 6b Order dated Apri 1 20, 19Si | | : 4. ihe provision of specification 4.0.4 is not applicable for entry into Mode 3 or .4. |
| : 3. '""" .,...
| | : b. Whenever integrity of a press>>.ire iso1 ation valve ~ i.s.ted in Table 4.4-4 cannot be demonstrated, the integrity of t~~ |
| * COOLJ,Ni SYSiEM PRESSUKE ISOLAiION VAlVES Low Pressure Safety Inject1vn Loop 11, co1d leg Loop 12, cold 1eg Loop 13, cold 1eg Loop not 1eg Loo? 14, cold leg Loop 14, not leg Valve 11 SJ56 11 SJ43 12SJ56 12SJ4l. 13SJS5 . I 3SJ4.3 13SJ156 13RH27 14SJ56 14SJ43 14SJ156 14RHZ7 Safety Injection Loop 11, cold leg 11SJ144 L"'"'"" _11, hot 1eg Loco 12, cold leg Loo;:i lZ, not 1e9 Loop 13, cold leg 13, hot leg Loop 14, cold 1eg H, hot 1 eg 11SJ156 11SJ139 12SJ144 12SJ156 12SJ139 l 3SJ144 13SJ156 l3SJ139 14SJ144 i4SJi56 14SJ139 LCR S96-10 l'!a:idr.11.':':t(a) | | remiining ialve in each high pressure line having a leaking valve shall be determined and recorded daily. In addition, the position of one other valve located in the high pressure line shall be recorded daily * |
| {b) A11owab1e Leakaoe G?M each valve * !S .O GPM each valve !.5.0 G?M each valve !S.O GPM each valve !_5.0 G?M each valve G?M each valve !_5.0 G?M each valve GPM each valve !_S.O GPM each valve GPM each valve GPM each valve <5.0 G?M each valve !:s.o GPM each valve GPM each valve !:5.U GPM each vaive !_S.O GPM each valve !_5.0 G?M each valve !_5. 0 GPl.f° each va 1ve GPM each valve G?M each valve !,S.O GPM each valve GPM each valve GPM each valve !,S_.O GPM each valve GPM each valve .0 GPM each vahe Leaka;e 1ess than or to 1.0 are accepta:le. | | * 3/ 4 4-1 6b Order dated Apri 1 20, 19Si |
| However, for ini:ial tests, or tests following valve or r.:ent, leakage rates less than or | | * Attachme~t 3. '""" .,... |
| :o 5.0 gpm ar! considered acceptable. | | * LR~N970619 LCR S96-10 K~CTOR COOLJ,Ni SYSiEM PRESSUKE ISOLAiION VAlVES l'!a:idr.11.':':t(a) {b) |
| Z. Leaka9e ntes ;rnter than i .0 g;r, but less than or to 5.0 S;:r.i are considerec ac:!ptable if th! lat!st measured rate has not exce!ded th! rate the test by an amount that reduces th! | | Valve ~o. A11owab1e Leakaoe Low Pressure Safety Inject1vn ~5.0 G?M each valve Loop 11, co1d leg 11 SJ56 * !S .O GPM each valve 11 SJ43 !.5.0 G?M each valve Loop 12, cold 1eg 12SJ56 !S.O GPM each valve 12SJ4l. !_5.0 G?M each valve Loop 13, cold 1eg 13SJS5 ~5.0 G?M each valve |
| cetw!en leaka;e rate and maximlJl'il p!m.issibh rate of 5.-0 S?ill !:y or greeter, 3. Leaka;e gre!ter than but less than or to 5,0 g;:im are if the latest measured rate exceeded the rate dettl"':':iined by previous test an that reduces the r.:ari:in be: ... *een rreas:.;red 1eal:.a;e ra:e !:"id the maxir.:u::: | | . I 3SJ4.3 !_5.0 G?M each valve Loop 13~ not 1eg 13SJ156 ~5.0 GPM each valve 13RH27 !_S.O GPM each valve Loo? 14, cold leg 14SJ56 ~.O GPM each valve 14SJ43 ~S.O GPM each valve Loop 14, not leg 14SJ156 <5.0 G?M each valve 14RHZ7 !:s.o GPM each valve In:2r:-:i~d1ate ?ressur~ Safety Injection ~.O GPM each valve Loop 11, cold leg 11SJ144 !:5.U GPM each vaive L"'"'"" _11, hot 1eg 11SJ156 !_S.O GPM each valve 11SJ139 !_5.0 G?M each valve Loco 12, cold leg 12SJ144 !_5. 0 GPl.f° each va 1ve Loo;:i lZ, not 1e9 12SJ156 ~5.0 GPM each valve 12SJ139 ~5.0 G?M each valve Loop 13, cold leg l 3SJ144 !,S.O GPM each valve Loo~ 13, hot leg 13SJ156 ~5.0 GPM each valve l3SJ139 ~5.0 GPM each valve Loop 14, cold 1eg 14SJ144 !,S_.O GPM each valve H, hot 1eg i4SJi56 ~5.0 GPM each valve 14SJ139 ~5 .0 GPM each vahe Leaka;e ra:~s 1ess than or e~~!l to 1.0 g~~ are ccr.sicere~ accepta:le. |
| ::iet"':':'.issibie rate cf S.O by or greater. (o) differential test shall not be 1ess than 150 psid. :;,;L:::;. | | However, for ini:ial tests, or tests following valve re~air or re~lace r.:ent, leakage rates less than or e~~al :o 5.0 gpm ar! considered acceptable. |
| 1 3/4 4-16C Order dated April 20,}} | | Z. Leaka9e ntes ;rnter than i .0 g;r, but less than or e~uai to 5.0 S;:r.i are considerec ac:!ptable if th! lat!st measured rate has not exce!ded th! rate C!~!r~in!d ~Y the prev1o~s test by an amount that reduces th! ~ar;in cetw!en ~=asured leaka;e rate and t~e maximlJl'il p!m.issibh rate of 5.-0 S?ill !:y SC~ or greeter, |
| | : 3. Leaka;e rate~ gre!ter than i.O*s;~ but less than or e~uai to 5,0 g;:im are consi~ered u~a:ceptaole if the latest measured rate exceeded the rate dettl"':':iined by t~e previous test ~Y an a~ount that reduces the r.:ari:in be: ...*een rreas:.;red 1eal:.a;e ra:e !:"id the maxir.:u::: ::iet"':':'.issibie rate cf S.O g~~ by SC~ or greater. |
| | (o) ,..,inim:.o~ differential test ~ressi.:re shall not be 1ess than 150 psid. |
| | :;,;L:::;. ~'NIT 1 3/4 4-16C Order dated April 20, iS~~}} |
Proposed Tech Specs Modifying Pressure Isolation Valves LCO, LCO Action Statement,Surveillance Requirement & Table 4.4-4 to Be Consistent W/Salem Unit 2ML18102B620 |
Person / Time |
---|
Site: |
Salem ![PSEG icon.png](/w/images/c/cc/PSEG_icon.png) |
---|
Issue date: |
10/14/1997 |
---|
From: |
Public Service Enterprise Group |
---|
To: |
|
---|
Shared Package |
---|
ML18102B619 |
List: |
---|
References |
---|
NUDOCS 9710210023 |
Download: ML18102B620 (3) |
|
Similar Documents at Salem |
---|
Category:TECHNICAL SPECIFICATIONS
MONTHYEARML18107A5171999-08-25025 August 1999 Marked-up Tech Spec Pages Deleting Footnotes That Were Added as One Time Changes & Proposing Change Identified Subsequent to 971114 Submittal That Corrects Error Issued in Amend 69 for Salem Unit 2 ML18107A4961999-08-23023 August 1999 Proposed Tech Specs,Modifying 3/4 7.7, Auxiliary Bldg Exhaust Air Filtration Sys. ML18107A4671999-07-29029 July 1999 Proposed Tech Specs Replacing Surveillance 4.6.1.1a with Appropriate NUREG-1431 Requirements ML18107A4601999-07-23023 July 1999 Proposed Tech Specs Pages Changing TS Surveillance Requirement 4.8.1.1.2 D 7 by Removing Restriction to Perform Test Every 18 Months During Shutdown ML18107A4241999-07-0202 July 1999 Proposed Tech Specs,Relocating TS 3/4.3.4 Lco,Surveillance Requirements & Bases from TS to UFSAR ML18107A3811999-06-10010 June 1999 Proposed Tech Specs 3/4.6.1, Containment Integrity, Clarifying When Verification of Primary Containment Integrity May Be Performed by Administrative Means ML18107A3601999-06-0404 June 1999 Non-proprietary Tech Specs Pages Re Transfer of PSEG Ownership Interests & Licensed Operating Authorities to New, Affiliated Nuclear Generating Company,Pseg Nuclear LLC ML18107A2131999-04-14014 April 1999 Proposed Tech Specs 3/4.9.12, Fhavs, Revised to Ensure Consistency Between TS Requirements for Fhavs & Sys Design Basis,As Well Better Alignment to Bases Provided in NUREG-1431 ML18106B1591999-03-31031 March 1999 Proposed Tech Specs Allowing Plant Operation to Continue to Thirteenth Refueling Outage (1R13),currently Scheduled to Begin on 990918 ML18106B0801999-02-22022 February 1999 Proposed Tech Specs Re CR Emergency Air Conditioning Sys ML18106B0641999-02-0808 February 1999 Proposed Tech Spec Pages,Modifying ECCS Subsystems Surveillance 4.5.3.2.b by Adding Option of Providing Necessary Isolation Function When Testing ML18106B0611999-02-0808 February 1999 Proposed Tech Specs SR 4.8.1.1.2.f Re Hot Restart & Definition of Standby Conditions. ML18106B0531999-02-0202 February 1999 Proposed Tech Specs 5.6.1.1,revising Max Permissible Enrichment of Stored New Fuel ML18106B0431999-01-19019 January 1999 Proposed Tech Specs Bases Section 3/4.1.2 Re Boration Sys ML18106B0241999-01-15015 January 1999 Proposed Tech Specs Re Deferral of Surveillance Requirements for Salem Generating Station,Unit 1 ML18106A9231998-10-12012 October 1998 Proposed Tech Specs Re Inserts & Marked Up Pages for LCR S98-03 ML18106A9181998-10-12012 October 1998 Proposed Tech Specs Re one-time Changes to Certain Unit 2 TS SR for Fuel Cycle 10 ML18106A8941998-09-29029 September 1998 Proposed Tech Specs Section 3/4.9.2,modified to Permit Use of Equivalent Methods to Obtain Containment Closure During Refueling Operations for Containment Equipment Hatch ML18106A8781998-09-17017 September 1998 Proposed Tech Specs Modifying 3/4.8.2.2,3/4.8.2.4 & 3/4.8.2.6 to Address Movement of Irradiated Fuel & Deleting LCO Re Requirement to Establish Containment Integrity ML18106A8371998-08-12012 August 1998 Proposed Tech Specs Modifying Allowed Continued Operation W/Inoperable Air Lock Door Provided That Operable Door Is Closed & Unlocked & Making Requirements for Inoperable Air Lock Door ML18106A7931998-07-30030 July 1998 Proposed Tech Specs,Revising Acceptance Criteria for CR Emergency Air Conditioning Sys from Maintaining CR at 1/8-inch Positive Pressure W/Respect to Adjacent Areas to Stated Phrase ML18106A6961998-07-0707 July 1998 Proposed Tech Specs Section 4.2.1 Re Aquatic Monitoring of App B for Environ Protection Plan ML18106A6631998-06-17017 June 1998 Proposed Revised Tech Specs Bases Pages 3/4.1.3,3/4.1.2, 3/4.5.5 & 3/4.9.1,ensuring Acceptable Power Distribution Limits Are Maintained,Providing Operational Flexibility & Clarifying Statements ML18106A4291998-03-26026 March 1998 Proposed Tech Specs,Changing Applicability Statement from Mode 3 to Modes 1 & 2 ML18106A4241998-03-26026 March 1998 Proposed Tech Specs Incorporating Note at Bottom of Salem Unit 2 T3/4.8.2 Into Salem 1 TS & Adding Asterisks to Word Inverters. ML18106A3221998-02-18018 February 1998 Marked-up TS Pages for Section 4.2.1 of App B ML18106A3091998-02-0202 February 1998 Revised TS Bases Pages for Specs 3/4.3.3.1,radiation Monitoring instrumentation,3/4.3.3.8,radioactive Liquid Effluent Monitoring Instrumentation & 3/4.3.3.9,radioactive Gaseous Effluent Monitoring Instrumentation ML18106A2541998-01-0808 January 1998 Proposed Tech Specs Pages,Adding Asterisk to Word Operable in LCO & Associated Note at Bottom of Page ML18106A2141997-12-15015 December 1997 Proposed Tech Specs Pages,Revising TS to Adopt Option B to 10CFR50,App J,For Type B & C Testing & Modify Existing TS Wording for Previous Adoption of Option B on Type a Testing ML18106A1961997-12-11011 December 1997 Proposed Tech Specs Re one-time Exemption to Allow Containment Purging in Modes 3 & 4 ML18102B6791997-11-14014 November 1997 Proposed Tech Specs Providing Surveillance Requirements to Codify Existing Procedural Commitments for SW Accumulator Vessels ML18102B6751997-11-14014 November 1997 Proposed Tech Specs Re Administrative & Editorial Corrections ML18102B6631997-11-0404 November 1997 Proposed Tech Specs,Deleting 4.8.1.1.2.d.1,which Calls for Diesels to Be Subjected to Insp Based on Vendor Recommendations at Least Once Per 18 Months During Shutdown ML18102B6591997-11-0404 November 1997 Proposed Tech Specs,Revising Surveillance Requirement 4.6.2.1.b to Verify That on Recirculation Flow,Containment Spray Pumps Develop Differential Pressure of Greater than or Equal to 204 Psid ML18102B6431997-10-29029 October 1997 Proposed Tech Specs Revising SR 4.8.1.1.2.d.2 Proposed in 960925 Request to Change EDG Voltage & Frequency Limits as Result of Updated EDG Load Calculations & Ambiguity in Testing Methodology for EDG Start Timing ML18102B6391997-10-29029 October 1997 Proposed Tech Specs Changing SG Insp Schedule to Require Next Insp within 24 Months of Mode 2 for Unit 2 Fuel Cycle 10 ML18102B6491997-10-24024 October 1997 Proposed Tech Specs Pages,Modifying TS 3/4.7.7, Auxiliary Building Exhaust Air Filtration Sys & Bases ML18102B6461997-10-24024 October 1997 Proposed Tech Specs Revising Containment Hydrogen Analyzer SRs of TS 4.6.4.1 ML18102B6321997-10-21021 October 1997 Proposed Tech Specs,Extending Applicability of Power Range Neutron Flux TS Trip to Require Operability & Surveillance Testing in Mode 3,when Reactor Trip Sys Breakers Are in Closed Position ML18102B6201997-10-14014 October 1997 Proposed Tech Specs Modifying Pressure Isolation Valves LCO, LCO Action Statement,Surveillance Requirement & Table 4.4-4 to Be Consistent W/Salem Unit 2 ML18102B6081997-10-0606 October 1997 Proposed Tech Specs Revising LCOs 3.1.3.1, Movable Control Assemblies & 3.1.3.2.1, Position Indication Sys. ML18102B5571997-08-27027 August 1997 Proposed Tech Specs,Providing Revised TS Bases Pages for TS 3.7.3, CCW Sys, Which States That Three CCW Pumps Required to Meet LCO ML18102B5301997-08-19019 August 1997 Proposed Tech Specs,Providing Addl Operational Flexibility to Allow Orderly Resumption of Startup & Preclude Unwarranted Power Transients at Salem Unit 2 ML18102B5341997-08-18018 August 1997 Proposed Tech Specs,Incorporating Plant Computer (P-250) Into TS Bases for Movable Control Assemblies ML18102B4891997-08-0101 August 1997 Proposed Tech Specs Section 4.2.1 Rewording Section to State Util Will Adhere to Section 7,Incidental Take Statement Approved by Natl Maring Fisheries Svc ML18102B3911997-06-12012 June 1997 Proposed Tech Specs,Representing Addition of New Spec 3/4.7.10, Chilled Water Sys - Auxiliary Bldg Subsystem. ML18102B3061997-05-14014 May 1997 Proposed Tech Specs,Revising SR 4.7.6.1.d.1,to Indicate That Specified Acceptable Filter Dp Is to Be Measured Across Filter Housing & Reflecting Filter Dp Acceptance Value Greater than 2.70 Water Gauge ML18102B2631997-05-0101 May 1997 Proposed Tech Specs,Adding New Spec 3/4.7.10, Chilled Water Sys - Auxiliary Bldg Subsystem. ML18102B2601997-05-0101 May 1997 Proposed Tech Specs 3/4.7.7 Revising Certain Allowed Outage Times & Creating 3/4.7.11 to Address Switchgear & Penetration Area Ventilation Sys ML18102B0341997-04-25025 April 1997 Proposed Tech Specs 3.5.2 Eliminating Flow Path from RHR Sys to RCS Hot Legs as Specified in LCO 3.5.2.c.2 1999-08-25
[Table view] Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML18107A5291999-09-10010 September 1999 Revised Event Classification Guide,Including Rev 18 to Table of Contents,Rev 10 to Attachments 6 & 7 & Rev 11 to Attachment 9 ML20211Q8771999-08-27027 August 1999 Rev 0 to Inservice Testing Manual for Pumps & Valves Program ML18107A5171999-08-25025 August 1999 Marked-up Tech Spec Pages Deleting Footnotes That Were Added as One Time Changes & Proposing Change Identified Subsequent to 971114 Submittal That Corrects Error Issued in Amend 69 for Salem Unit 2 ML18107A5121999-08-23023 August 1999 Procedure 71151, Performance Indicator Verification. ML18107A5091999-08-23023 August 1999 Attachment 21 to Procedure 71111, Safety Sys Design & Performance Capability. ML18107A4961999-08-23023 August 1999 Proposed Tech Specs,Modifying 3/4 7.7, Auxiliary Bldg Exhaust Air Filtration Sys. ML18107A4671999-07-29029 July 1999 Proposed Tech Specs Replacing Surveillance 4.6.1.1a with Appropriate NUREG-1431 Requirements ML18107A4601999-07-23023 July 1999 Proposed Tech Specs Pages Changing TS Surveillance Requirement 4.8.1.1.2 D 7 by Removing Restriction to Perform Test Every 18 Months During Shutdown ML18107A4241999-07-0202 July 1999 Proposed Tech Specs,Relocating TS 3/4.3.4 Lco,Surveillance Requirements & Bases from TS to UFSAR ML18107A3811999-06-10010 June 1999 Proposed Tech Specs 3/4.6.1, Containment Integrity, Clarifying When Verification of Primary Containment Integrity May Be Performed by Administrative Means ML18107A3601999-06-0404 June 1999 Non-proprietary Tech Specs Pages Re Transfer of PSEG Ownership Interests & Licensed Operating Authorities to New, Affiliated Nuclear Generating Company,Pseg Nuclear LLC ML18107A2961999-05-12012 May 1999 Revised Event Classification Guide,Including Rev 16 to Table of Contents,Rev 8 to Attachment 6,rev 8 to Attachment 7 & Rev 9 to Attachment 9 ML18107A2131999-04-14014 April 1999 Proposed Tech Specs 3/4.9.12, Fhavs, Revised to Ensure Consistency Between TS Requirements for Fhavs & Sys Design Basis,As Well Better Alignment to Bases Provided in NUREG-1431 ML18106B1591999-03-31031 March 1999 Proposed Tech Specs Allowing Plant Operation to Continue to Thirteenth Refueling Outage (1R13),currently Scheduled to Begin on 990918 ML18106B0801999-02-22022 February 1999 Proposed Tech Specs Re CR Emergency Air Conditioning Sys ML18106B0641999-02-0808 February 1999 Proposed Tech Spec Pages,Modifying ECCS Subsystems Surveillance 4.5.3.2.b by Adding Option of Providing Necessary Isolation Function When Testing ML18106B0611999-02-0808 February 1999 Proposed Tech Specs SR 4.8.1.1.2.f Re Hot Restart & Definition of Standby Conditions. ML18106B0531999-02-0202 February 1999 Proposed Tech Specs 5.6.1.1,revising Max Permissible Enrichment of Stored New Fuel ML18106B0431999-01-19019 January 1999 Proposed Tech Specs Bases Section 3/4.1.2 Re Boration Sys ML18106B0241999-01-15015 January 1999 Proposed Tech Specs Re Deferral of Surveillance Requirements for Salem Generating Station,Unit 1 ML18106A9231998-10-12012 October 1998 Proposed Tech Specs Re Inserts & Marked Up Pages for LCR S98-03 ML18106A9181998-10-12012 October 1998 Proposed Tech Specs Re one-time Changes to Certain Unit 2 TS SR for Fuel Cycle 10 ML18106A8941998-09-29029 September 1998 Proposed Tech Specs Section 3/4.9.2,modified to Permit Use of Equivalent Methods to Obtain Containment Closure During Refueling Operations for Containment Equipment Hatch ML18106A8781998-09-17017 September 1998 Proposed Tech Specs Modifying 3/4.8.2.2,3/4.8.2.4 & 3/4.8.2.6 to Address Movement of Irradiated Fuel & Deleting LCO Re Requirement to Establish Containment Integrity ML18106A8371998-08-12012 August 1998 Proposed Tech Specs Modifying Allowed Continued Operation W/Inoperable Air Lock Door Provided That Operable Door Is Closed & Unlocked & Making Requirements for Inoperable Air Lock Door ML18106A7931998-07-30030 July 1998 Proposed Tech Specs,Revising Acceptance Criteria for CR Emergency Air Conditioning Sys from Maintaining CR at 1/8-inch Positive Pressure W/Respect to Adjacent Areas to Stated Phrase ML18106A6961998-07-0707 July 1998 Proposed Tech Specs Section 4.2.1 Re Aquatic Monitoring of App B for Environ Protection Plan ML18106A6631998-06-17017 June 1998 Proposed Revised Tech Specs Bases Pages 3/4.1.3,3/4.1.2, 3/4.5.5 & 3/4.9.1,ensuring Acceptable Power Distribution Limits Are Maintained,Providing Operational Flexibility & Clarifying Statements ML20216B0641998-05-0101 May 1998 Rev 1 to ECG-ATT 14, Four Hour Rept - NRC Operations & Rev 7 to ECG-HECG-TOC, Hope Creek Event Classification Guide Table of Contents/Signature Page ML18106A5571998-04-16016 April 1998 Rev 21 to EOP-CFST-1, Shutdown Margin Status Tree & Rev 10 to Table of Contents ML20239A1251998-03-31031 March 1998 Rev 11 to Salem Nuclear Generating Station Odcm ML18106A4241998-03-26026 March 1998 Proposed Tech Specs Incorporating Note at Bottom of Salem Unit 2 T3/4.8.2 Into Salem 1 TS & Adding Asterisks to Word Inverters. ML18106A4291998-03-26026 March 1998 Proposed Tech Specs,Changing Applicability Statement from Mode 3 to Modes 1 & 2 ML18106A3921998-03-13013 March 1998 Rev 9 to ECG-SECG-TOC & Rev 2 to ECG-ATT.04, General Emergency. ML18106A8281998-03-0404 March 1998 Rev 1 to Reactivity Manipulations Documentation Guide. ML18106A3221998-02-18018 February 1998 Marked-up TS Pages for Section 4.2.1 of App B ML18106A3091998-02-0202 February 1998 Revised TS Bases Pages for Specs 3/4.3.3.1,radiation Monitoring instrumentation,3/4.3.3.8,radioactive Liquid Effluent Monitoring Instrumentation & 3/4.3.3.9,radioactive Gaseous Effluent Monitoring Instrumentation ML18106A2541998-01-0808 January 1998 Proposed Tech Specs Pages,Adding Asterisk to Word Operable in LCO & Associated Note at Bottom of Page ML18106A2141997-12-15015 December 1997 Proposed Tech Specs Pages,Revising TS to Adopt Option B to 10CFR50,App J,For Type B & C Testing & Modify Existing TS Wording for Previous Adoption of Option B on Type a Testing ML18106A1961997-12-11011 December 1997 Proposed Tech Specs Re one-time Exemption to Allow Containment Purging in Modes 3 & 4 ML18102B6791997-11-14014 November 1997 Proposed Tech Specs Providing Surveillance Requirements to Codify Existing Procedural Commitments for SW Accumulator Vessels ML18102B6751997-11-14014 November 1997 Proposed Tech Specs Re Administrative & Editorial Corrections ML18102B6591997-11-0404 November 1997 Proposed Tech Specs,Revising Surveillance Requirement 4.6.2.1.b to Verify That on Recirculation Flow,Containment Spray Pumps Develop Differential Pressure of Greater than or Equal to 204 Psid ML18102B6631997-11-0404 November 1997 Proposed Tech Specs,Deleting 4.8.1.1.2.d.1,which Calls for Diesels to Be Subjected to Insp Based on Vendor Recommendations at Least Once Per 18 Months During Shutdown ML18102B6431997-10-29029 October 1997 Proposed Tech Specs Revising SR 4.8.1.1.2.d.2 Proposed in 960925 Request to Change EDG Voltage & Frequency Limits as Result of Updated EDG Load Calculations & Ambiguity in Testing Methodology for EDG Start Timing ML18102B6391997-10-29029 October 1997 Proposed Tech Specs Changing SG Insp Schedule to Require Next Insp within 24 Months of Mode 2 for Unit 2 Fuel Cycle 10 ML18102B6491997-10-24024 October 1997 Proposed Tech Specs Pages,Modifying TS 3/4.7.7, Auxiliary Building Exhaust Air Filtration Sys & Bases ML18102B6461997-10-24024 October 1997 Proposed Tech Specs Revising Containment Hydrogen Analyzer SRs of TS 4.6.4.1 ML18102B6321997-10-21021 October 1997 Proposed Tech Specs,Extending Applicability of Power Range Neutron Flux TS Trip to Require Operability & Surveillance Testing in Mode 3,when Reactor Trip Sys Breakers Are in Closed Position ML18102B6201997-10-14014 October 1997 Proposed Tech Specs Modifying Pressure Isolation Valves LCO, LCO Action Statement,Surveillance Requirement & Table 4.4-4 to Be Consistent W/Salem Unit 2 1999-09-10
[Table view] |
Text
Attachment 3 e LR*-N970619
- REACiOR COOLANT SYSTEM PP.IP.ARY COOLANT SYSTEM PRESSURE ISOLATION OP::AATION VAL\'~S LI~lT!NG
'
LCR S96-lO *
- f'ia,iset2T 3.4.5.3 P.eactor Cooi~nt System Pressure Isoi~tion Va1ves sha11 be operat ona * ~lt\ce w;~ oPe/2ASLe
- a. The integrity of a11 pressure isolation valves 1isted in Table 4.4-4 sha11 have been demonstrated, except as specified in "b". Valve leakage shall not exceed the amounts indicated.
- b. In t e event that the integrity of any ?ressure isolation va1ve specified in Table 4.4-' cannot be _demonstrated.
reactor operation may continue, provided that at .
.1 east two valves in each high: pressure 1 i ne havina a non-functi ona i valve are in, and remain in, the mode corresponcino to th~ isolated condition.laJ * * ~
~.i::iuc~:!LITY: MODES , I 2; 3, and 4.
\
su~v::r LL.A.NCE If neither Condition "a" nor "b 11 can be met. an orderly shutdown sha11 be initiated within one hour and the reactor shal 1 be in at least HOT STANC6Y within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTOO~N within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.
?.::OU! REMENTS 4.4.6.3 a. Periodi~ leakagi.testing(b) on each valve 1Jsted in Table 4.4-4 shall be -accom~1ished!
- 1. Each time the plant is placed in COLO SHUTDOWN conditicn for refueling.
- 2. Each ti~e the plant is p1aced in COLO SHUTOO~N condition for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> if testing has not' been accomplished in the preced5ng 12 months.
Motor operated valves shall be placed in the closed position and power supplies deenergized.
b io satisfy ALAO.A l"'equirements. 1eakage may be measured indirectly (as from the perfor~ance of pressure indicatol"'s) if accom?lished in accordance with approved procedures and su?~orted by co~putations showing tnat the*
~ethod is capable of de:.;onstrating valve comp1iance with the leakage criteria.
--- ~-...-..,
3/4 4-16a Order dated April 20, 1981
Attachment e. LR-N970619 LCR S96"-10 ?\!.
- 3. Prior to returning the va1ve to serv~ce foll~wing
- maintenance, re?air, or rep1ac~ent work on "the va1ve *
- 4. ihe provision of specification 4.0.4 is not applicable for entry into Mode 3 or .4.
- b. Whenever integrity of a press>>.ire iso1 ation valve ~ i.s.ted in Table 4.4-4 cannot be demonstrated, the integrity of t~~
remiining ialve in each high pressure line having a leaking valve shall be determined and recorded daily. In addition, the position of one other valve located in the high pressure line shall be recorded daily *
- 3/ 4 4-1 6b Order dated Apri 1 20, 19Si
- LR~N970619 LCR S96-10 K~CTOR COOLJ,Ni SYSiEM PRESSUKE ISOLAiION VAlVES l'!a:idr.11.':':t(a) {b)
Valve ~o. A11owab1e Leakaoe Low Pressure Safety Inject1vn ~5.0 G?M each valve Loop 11, co1d leg 11 SJ56 * !S .O GPM each valve 11 SJ43 !.5.0 G?M each valve Loop 12, cold 1eg 12SJ56 !S.O GPM each valve 12SJ4l. !_5.0 G?M each valve Loop 13, cold 1eg 13SJS5 ~5.0 G?M each valve
. I 3SJ4.3 !_5.0 G?M each valve Loop 13~ not 1eg 13SJ156 ~5.0 GPM each valve 13RH27 !_S.O GPM each valve Loo? 14, cold leg 14SJ56 ~.O GPM each valve 14SJ43 ~S.O GPM each valve Loop 14, not leg 14SJ156 <5.0 G?M each valve 14RHZ7 !:s.o GPM each valve In:2r:-:i~d1ate ?ressur~ Safety Injection ~.O GPM each valve Loop 11, cold leg 11SJ144 !:5.U GPM each vaive L"'"'"" _11, hot 1eg 11SJ156 !_S.O GPM each valve 11SJ139 !_5.0 G?M each valve Loco 12, cold leg 12SJ144 !_5. 0 GPl.f° each va 1ve Loo;:i lZ, not 1e9 12SJ156 ~5.0 GPM each valve 12SJ139 ~5.0 G?M each valve Loop 13, cold leg l 3SJ144 !,S.O GPM each valve Loo~ 13, hot leg 13SJ156 ~5.0 GPM each valve l3SJ139 ~5.0 GPM each valve Loop 14, cold 1eg 14SJ144 !,S_.O GPM each valve H, hot 1eg i4SJi56 ~5.0 GPM each valve 14SJ139 ~5 .0 GPM each vahe Leaka;e ra:~s 1ess than or e~~!l to 1.0 g~~ are ccr.sicere~ accepta:le.
However, for ini:ial tests, or tests following valve re~air or re~lace r.:ent, leakage rates less than or e~~al :o 5.0 gpm ar! considered acceptable.
Z. Leaka9e ntes ;rnter than i .0 g;r, but less than or e~uai to 5.0 S;:r.i are considerec ac:!ptable if th! lat!st measured rate has not exce!ded th! rate C!~!r~in!d ~Y the prev1o~s test by an amount that reduces th! ~ar;in cetw!en ~=asured leaka;e rate and t~e maximlJl'il p!m.issibh rate of 5.-0 S?ill !:y SC~ or greeter,
- 3. Leaka;e rate~ gre!ter than i.O*s;~ but less than or e~uai to 5,0 g;:im are consi~ered u~a:ceptaole if the latest measured rate exceeded the rate dettl"':':iined by t~e previous test ~Y an a~ount that reduces the r.:ari:in be: ...*een rreas:.;red 1eal:.a;e ra:e !:"id the maxir.:u::: ::iet"':':'.issibie rate cf S.O g~~ by SC~ or greater.
(o) ,..,inim:.o~ differential test ~ressi.:re shall not be 1ess than 150 psid.
- ,;L
- ::;. ~'NIT 1 3/4 4-16C Order dated April 20, iS~~