|
|
| Line 19: |
Line 19: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:Programs and Manuals 5.5 5.5 Programs and Manuals (continued) 5.5.8 EXplosive Gas and Storage Tank Radioactivity Monitoring Program This program provides controls for potentially explosive gas mixtures containedin the Main Condenser offgas treatment system, and the quantity of radioactivity contained in temporary outdoor storage tanks.The program shall include: a. A limit of 4% by volume for concentration of hydrogen in the main condenser offgas treatment system and a surveillance program to ensure the limit is maintained. | | {{#Wiki_filter:Programs and Manuals 5.5 5.5 Programs and Manuals (continued) 5.5.8 EXplosive Gas and Storage Tank Radioactivity Monitoring Program This program provides controls for potentially explosive gas mixtures containedin the Main Condenser offgas treatment system, and the quantity of radioactivity contained in temporary outdoor storage tanks. |
| : b. A surveillance program to ensure that the quantity of radioactivity contained in any outdoor liquid radwaste tank that is not surrounded by liners, dikes, or walls, capable of holding the tank's contents and that does not have tank overflows and surrounding area drains connected to the liquid radwaste treatment system is e 10 curies, excluding tritium and dissolved or entrained noble gases.The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Explosive Gas and Storage Tank Radioactivity Monitoring Program surveillance frequencies. | | The program shall include: |
| 5.5.9 Emergency Diesel Generator Fuel Oil Testing Program An emergency diesel generator fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established. | | : a. A limit of |
| The program shall include sampling and testing requirements, and acceptance criteria, all in accordance with applicable ASTM Standards. | | * 4% by volume for concentration of hydrogen in the main condenser offgas treatment system and a surveillance program to ensure the limit is maintained. |
| The purpose of the program is to establish the following: | | : b. A surveillance program to ensure that the quantity of radioactivity contained in any outdoor liquid radwaste tank that is not surrounded by liners, dikes, or walls, capable of holding the tank's contents and that does not have tank overflows and surrounding area drains connected to the liquid radwaste treatment system is e 10 curies, excluding tritium and dissolved or entrained noble gases. |
| : a. Acceptability of new fuel oil for use prior to addition to storage tanks by determining that the fuel oil has: 1. an API gravity or an absolute specific gravity within I Illll ts, 2. a flash point and kinematic viscosity within limits for ASTM 2D fuel oil, and 3. a clear and bright appearance with proper color or a water and sediment content within limits;(continued) | | The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Explosive Gas and Storage Tank Radioactivity Monitoring Program surveillance frequencies. |
| FERMI UNIT 2 5.0-15 Amendment No. 1$4174 Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.9 Emergency Diesel Generator Fuel Oil Testing Program (continued) | | 5.5.9 Emergency Diesel Generator Fuel Oil Testing Program An emergency diesel generator fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established. The program shall include sampling and testing requirements, and acceptance criteria, all in accordance with applicable ASTM Standards. The purpose of the program is to establish the following: |
| : b. Within 31 days following addition of new fuel oil to storage tanks, verify that the properties of the new fuel oil, other than those addressed in a., above, are within limits for ASTM 2D fuel oil; and c. Total particulate concentration of the fuel oil is 10 mg/l when tested every 31 days.The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Emergency Diesel Generator Fuel Oil Testing Program testing frequencies. | | : a. Acceptability of new fuel oil for use prior to addition to storage tanks by determining that the fuel oil has: |
| 5.5.10 Technical Specifications (TS) Bases Control Program This program provides a means for processing changes to the Bases of these Technical Specifications. | | : 1. an API gravity or an absolute specific gravity within I Illll ts, |
| : a. Changes to the Bases of the TS'shall be made under appropriate administrative controls and reviews.b. Licensees may make changes to Bases without prior NRC approval provided the changes do not require either of the following: | | : 2. a flash point and kinematic viscosity within limits for ASTM 2D fuel oil, and |
| : 1. a change in the TS incorporated in the license; or 2. a change to the UFSAR or Bases that requires NRC approval pursuant to 10 CFR 50.59.c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the UFSAR.d. Proposed changes that meet the criteria of Specification 5.5.10b above shall be reviewed and approved by the NRC prior to implementation. | | : 3. a clear and bright appearance with proper color or a water and sediment content within limits; (continued) |
| Changes to the Bases implemented without prior NDr approvmal shallbe pronidda +to tka NRD on a frequency consistent with 10 CFR 50.71(e).(continued) | | FERMI UNIT 2 5.0-15 Amendment No. 1$4174 |
| FERMI -UNIT 2 5.0-16 Amendment No./ff'4, 16ý115,}} | | |
| | Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.9 Emergency Diesel Generator Fuel Oil Testing Program (continued) |
| | : b. Within 31 days following addition of new fuel oil to storage tanks, verify that the properties of the new fuel oil, other than those addressed in a., above, are within limits for ASTM 2D fuel oil; and |
| | : c. Total particulate concentration of the fuel oil is |
| | * 10 mg/l when tested every 31 days. |
| | The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Emergency Diesel Generator Fuel Oil Testing Program testing frequencies. |
| | 5.5.10 Technical Specifications (TS) Bases Control Program This program provides a means for processing changes to the Bases of these Technical Specifications. |
| | : a. Changes to the Bases of the TS'shall be made under appropriate administrative controls and reviews. |
| | : b. Licensees may make changes to Bases without prior NRC approval provided the changes do not require either of the following: |
| | : 1. a change in the TS incorporated in the license; or |
| | : 2. a change to the UFSAR or Bases that requires NRC approval pursuant to 10 CFR 50.59. |
| | : c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the UFSAR. |
| | : d. Proposed changes that meet the criteria of Specification 5.5.10b above shall be reviewed and approved by the NRC prior to implementation. Changes to the Bases implemented without prior NDr approvmal shallbe pronidda +to tka NRD on a frequency consistent with 10 CFR 50.71(e). |
| | (continued) |
| | FERMI - UNIT 2 5.0-16 Amendment No./ff'4, 16ý115,}} |
Letter Sequence Other |
|---|
TAC:MD3691, Revision to TS 5.5.13 and Associated TS Bases for Diesel Fuel Oil (Open) |
|
|
Similar Documents at Fermi |
|---|
Category:Technical Specifications
MONTHYEARML23310A1492023-12-0808 December 2023
Issuance of Amendment No. 227 Regarding Revision of Technical Specification 3.8.1, AC Sources - Operating, Emergency Diesel Generator Voltage and Frequency Surveillance Requirements
ML23243A8852023-09-18018 September 2023
Issuance of Amendment No. 225 Regarding Revision of Technical Specifications 3.7.2, Emergency Equipment Cooling Water, Emergency Equipment Service Water and System and Ultimate Heat Sink (Exigent Circumstances)
NRC-23-0055, NRR E-mail Capture - (External Sender) Fermi 2 Power Plant, Emergency Application to Revise Technical Specifications to Adopt TSTF 568, Revise Applicability of BWR TS 3.6.2.5 and TS 3.6.3.2 - Updated Clean Sheet for NRC-23-00552023-08-16016 August 2023
NRR E-mail Capture - (External_Sender) Fermi 2 Power Plant, Emergency Application to Revise Technical Specifications to Adopt TSTF 568, Revise Applicability of BWR TS 3.6.2.5 and TS 3.6.3.2 - Updated Clean Sheet for NRC-23-0055
ML23227A2212023-08-15015 August 2023
Emergency Application to Revise Technical Specifications to Adopt TSTF 568, Revise Applicability of BWR TS 3.6.2.5 and TS 3.6.3.2
ML23122A2332023-06-26026 June 2023
Issuance of Amendment No. 223 Regarding Revision of Technical Specifications to Adopt TSTF-582, Reactor Pressure Vessel Water Inventory Control (RPV WIC) Enhancements
NRC-23-0039, Request for Enforcement Discretion for Technical Specification 3.7.2, Emergency Equipment Cooling Water (Eecw)/Emergency Equipment Service Water (Eesw) System and Ultimate Heat Sink (UHS)2023-06-0606 June 2023
Request for Enforcement Discretion for Technical Specification 3.7.2, Emergency Equipment Cooling Water (Eecw)/Emergency Equipment Service Water (Eesw) System and Ultimate Heat Sink (UHS)
ML21335A2802022-04-0707 April 2022
Issuance of Amendment No. 222 Regarding Revision of Technical Specifications to Remove Obsolete Information, Make Minor Corrections, and Make Several Editorial Changes
ML22032A1572022-01-19019 January 2022
Technical Requirements Manual - Vol. 1 Revision 130 Dated 01/19/2022
ML21251A1602021-08-17017 August 2021
Technical Requirements Manual - Vol 1 - (Revision 127 Dated 08/17/2021)
ML21053A2022021-02-0101 February 2021
Technical Requirements Manual, Vol 1 - Revision 124 Dated 02/01/2021
ML20233A8382020-10-0505 October 2020
Issuance of Amendment No. 216 - Revision to Technical Specification in Response to GE Energy-Nuclear's 10 CFR Part 21 Safety Communication SC05-03
ML18165A2022018-09-13013 September 2018
Issuance of Amendment Regarding the Adoption of TSTF-484, Use of TS 3.10.1 for Scram Time Testing Activities
ML16270A5312016-12-15015 December 2016
Fermi, Unit 2, Preoperational Test, Startup Tests and Other Items
ML16069A0062016-04-20020 April 2016
Issuance of Amendment Technical Specifications to Adopt Technical Specifications Task Force - 523, Generic Letter 2008-01, Managing Gas Accumulation
ML16054A6372016-04-0505 April 2016
Issuance of Amendment to Revise License Amendment Request to Revise Technical Specification Section 3.5.1, Emergency Core Cooling System - Operating Report
ML16039A1212016-02-18018 February 2016
Corrections to Amendment No. 201 Regarding Relocation of Specific Surveillance Frequencies to a Licensee-Controlled Program Based on Technical Specification Task Force (TSTF) Change TSTF-425
ML15233A0842015-09-29029 September 2015
Issuance of Amendment License Amendment Request to Revise the Emergency Action Level Scheme for the Fermi Emergency Plan
ML15155B4162015-07-14014 July 2015
Ferm, Uniti 2 - Issuance of Amendment Revise Technical Specifications by Relocating Surveillance Frequencies to Licensee Control in Accordance with Technical Specification Task Force Traveler 425, Revision 3
ML15096A0432015-05-0707 May 2015
Issuance of Amendment Cyber Security Plan Implementation Schedule (Tac No. MF4366)
NRC-14-0049, Supplement to License Amendment Request to Revise Technical Specification Surveillance Requirements for Direct Current Batteries2014-06-19019 June 2014
Supplement to License Amendment Request to Revise Technical Specification Surveillance Requirements for Direct Current Batteries
ML13364A1312014-02-10010 February 2014
Issuance of Amendment Measurement Uncertainty Recapture Power Uprate
ML13346B0672014-02-0404 February 2014
Issuance of Amendment Relocation of Pressure and Temperature Curves to a Pressure Temperature Limits Report
ML13112A1422013-05-13013 May 2013
Issuance of Amendment to Revise Technical Specifications to Adopt TSTF-522, Using Consolidated Line Item Improvement Process
NRC-13-0004, License Amendment Request for Measurement Uncertainty Recapture (Mur) Power Uprate2013-02-0707 February 2013
License Amendment Request for Measurement Uncertainty Recapture (Mur) Power Uprate
NRC-13-0001, License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-423, Revision 1, Technical Specifications End States, NEDC-32988-A, Using the Consolidated Line Item Improvement Process2013-01-11011 January 2013
License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-423, Revision 1, Technical Specifications End States, NEDC-32988-A, Using the Consolidated Line Item Improvement Process
NRC-12-0037, Proposed License Amendment to Relocate Pressure and Temperature Curves to a Pressure Temperature Limits Report2012-12-21021 December 2012
Proposed License Amendment to Relocate Pressure and Temperature Curves to a Pressure Temperature Limits Report
NRC-12-0037, Fermi 2, Proposed License Amendment to Relocate Pressure and Temperature Curves to a Pressure Temperature Limits Report2012-12-21021 December 2012
Fermi 2, Proposed License Amendment to Relocate Pressure and Temperature Curves to a Pressure Temperature Limits Report
NRC-12-0071, Application to Revise Technical Specifications to Adopt TSTF-522, Revise Ventilation System Surveillance Requirements to Operate for 10 Hours Per Month, Using the Consolidated Line Item Improvement Process2012-11-13013 November 2012
Application to Revise Technical Specifications to Adopt TSTF-522, Revise Ventilation System Surveillance Requirements to Operate for 10 Hours Per Month, Using the Consolidated Line Item Improvement Process
NRC-12-0005, Proposed License Amendment to Revise the Residual Heat Removal Suppression Pool Cooling Flow Rate in Technical Specification Surveillance Requirement 3.6.2.3.22012-01-10010 January 2012
Proposed License Amendment to Revise the Residual Heat Removal Suppression Pool Cooling Flow Rate in Technical Specification Surveillance Requirement 3.6.2.3.2
NRC-12-0004, Proposed License Amendment to Modify Technical Specification Surveillance Requirements for Safety Relief Valves2012-01-10010 January 2012
Proposed License Amendment to Modify Technical Specification Surveillance Requirements for Safety Relief Valves
NRC-11-0049, License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-306, Revision 2, Add Action to LCO 3.3.6.1 to Give Option to Isolate the Penetration.2011-12-20020 December 2011
License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-306, Revision 2, Add Action to LCO 3.3.6.1 to Give Option to Isolate the Penetration.
NRC-11-0030, License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-501, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control.2011-08-12012 August 2011
License Amendment Request for Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-501, Revision 1, Relocate Stored Fuel Oil and Lube Oil Volume Values to Licensee Control.
NRC-11-0013, License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-514, Revision 3, Revise BWR Operability Requirements and Actions for RCS Leakage Instrumentation.2011-04-0808 April 2011
License Amendment Request for Adoption of Technical Specification Task Force Traveler TSTF-514, Revision 3, Revise BWR Operability Requirements and Actions for RCS Leakage Instrumentation.
ML1013408512010-05-14014 May 2010
Revised Clean TS Pages
NRC-10-0003, Proposed License Amendment to Revise the Core Spray Flow Requirement of Technical Specification Surveillance Tests SR 3.5.1.8 and SR 3.5.2.62010-01-0404 January 2010
Proposed License Amendment to Revise the Core Spray Flow Requirement of Technical Specification Surveillance Tests SR 3.5.1.8 and SR 3.5.2.6
NRC-09-0022, Proposed License Amendment to Revise the Degraded Voltage Function Requirements of Technical Specification Table 3.3.8.1-1 to Reflect Undervoltage Backfit Modification2009-06-10010 June 2009
Proposed License Amendment to Revise the Degraded Voltage Function Requirements of Technical Specification Table 3.3.8.1-1 to Reflect Undervoltage Backfit Modification
NRC-08-0061, Proposed License Amendment to Remove Statements Related to Nuclear Power Plant Staff Working Hours in Technical Specification2008-09-12012 September 2008
Proposed License Amendment to Remove Statements Related to Nuclear Power Plant Staff Working Hours in Technical Specification
ML0812808342008-06-25025 June 2008
Tech Spec Pages for Amendment 180 Delete the Note Associated with the Performance of Channel Calibration for Primary Containment High Range Radiation Monitor in Technical Specification 3.3.3.1 Surveillance Requirements
ML0807900262008-03-17017 March 2008
Issuance of Amendment Technical Specification Change to Emergency Diesel Generator Surveillance Requirements
NRC-08-0001, Application for Technical Specification Change Regarding Revision of Control Rod Notch Surveillance Test Frequency and a Clarification of a Frequency Example Using the Consolidated Line Item Improvement Process2008-01-15015 January 2008
Application for Technical Specification Change Regarding Revision of Control Rod Notch Surveillance Test Frequency and a Clarification of a Frequency Example Using the Consolidated Line Item Improvement Process
ML0721404442007-08-0101 August 2007
Tech Spec Pages for Amendment Consolidated Line Item Improvement Process (Cllip) for Technical Specification Change (TSTF-427) to Add Limiting Condition for Operation (LCO) 30.9 Regarding the Unavailability of Barriers
ML0721407632007-08-0101 August 2007
Technical Specification 3.8.1 Extension of the Completion Time for an Inoperable Diesel Generator Amendment
ML0715002322007-04-12012 April 2007
Technical Specifications, Application for Technical Specification Change TSTF-374, Revision to TS 5.5.13 and Associated TS Bases for the Diesel Fuel Oil Testing Programs Using the Consolidated Line Item Improvement Process
NRC-07-0012, Proposed License Amendment to Revise the Minimum Emergency Diesel Generator Voltage in Technical Specification 3.8.1 Surveillance Requirements2007-03-19019 March 2007
Proposed License Amendment to Revise the Minimum Emergency Diesel Generator Voltage in Technical Specification 3.8.1 Surveillance Requirements
NRC-07-0001, Application for Technical Specification Change (TSTF-427) to Add LCO 3.0.9 Regarding the Unavailability of Barriers Using the Consolidated Line Item Improvement Process2007-01-26026 January 2007
Application for Technical Specification Change (TSTF-427) to Add LCO 3.0.9 Regarding the Unavailability of Barriers Using the Consolidated Line Item Improvement Process
ML0622004402006-08-0707 August 2006
Technical Specifications, Changes to Address Issues Related to an Inconsistency That Was Inadvertently Introduced During Conversion to Improved TSs When 1 Per Room Replaced 2 as the Required Channels Per Trip System
NRC-06-0044, Response to Request for Additional Information for Revision to License Amendment Request to Revise Technical Specification 3.3.6.1, Primary Containment Isolation Instrumentation2006-07-12012 July 2006
Response to Request for Additional Information for Revision to License Amendment Request to Revise Technical Specification 3.3.6.1, Primary Containment Isolation Instrumentation
NRC-06-0040, Proposed License Amendment Request to Extend the Completion Time for Technical Specification 3.8.1 for an Inoperable Emergency Diesel Generator2006-07-12012 July 2006
Proposed License Amendment Request to Extend the Completion Time for Technical Specification 3.8.1 for an Inoperable Emergency Diesel Generator
ML0604800392006-02-15015 February 2006
Tech Spec Pages for Amendment 172 Regarding Consolidated Line Item Improvement for Snubbers
ML0603704972006-02-0606 February 2006
Tech Spec Pages for Amendment 171 Allowed Outage Time Extension for Emergency Diesel Generator 12 for One Specific Incident
2023-09-18
[Table view] |
Text
Programs and Manuals 5.5 5.5 Programs and Manuals (continued) 5.5.8 EXplosive Gas and Storage Tank Radioactivity Monitoring Program This program provides controls for potentially explosive gas mixtures containedin the Main Condenser offgas treatment system, and the quantity of radioactivity contained in temporary outdoor storage tanks.
The program shall include:
- a. A limit of
- 4% by volume for concentration of hydrogen in the main condenser offgas treatment system and a surveillance program to ensure the limit is maintained.
- b. A surveillance program to ensure that the quantity of radioactivity contained in any outdoor liquid radwaste tank that is not surrounded by liners, dikes, or walls, capable of holding the tank's contents and that does not have tank overflows and surrounding area drains connected to the liquid radwaste treatment system is e 10 curies, excluding tritium and dissolved or entrained noble gases.
The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Explosive Gas and Storage Tank Radioactivity Monitoring Program surveillance frequencies.
5.5.9 Emergency Diesel Generator Fuel Oil Testing Program An emergency diesel generator fuel oil testing program to implement required testing of both new fuel oil and stored fuel oil shall be established. The program shall include sampling and testing requirements, and acceptance criteria, all in accordance with applicable ASTM Standards. The purpose of the program is to establish the following:
- a. Acceptability of new fuel oil for use prior to addition to storage tanks by determining that the fuel oil has:
- 1. an API gravity or an absolute specific gravity within I Illll ts,
- 2. a flash point and kinematic viscosity within limits for ASTM 2D fuel oil, and
- 3. a clear and bright appearance with proper color or a water and sediment content within limits; (continued)
FERMI UNIT 2 5.0-15 Amendment No. 1$4174
Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.9 Emergency Diesel Generator Fuel Oil Testing Program (continued)
- b. Within 31 days following addition of new fuel oil to storage tanks, verify that the properties of the new fuel oil, other than those addressed in a., above, are within limits for ASTM 2D fuel oil; and
- c. Total particulate concentration of the fuel oil is
- 10 mg/l when tested every 31 days.
The provisions of SR 3.0.2 and SR 3.0.3 are applicable to the Emergency Diesel Generator Fuel Oil Testing Program testing frequencies.
5.5.10 Technical Specifications (TS) Bases Control Program This program provides a means for processing changes to the Bases of these Technical Specifications.
- a. Changes to the Bases of the TS'shall be made under appropriate administrative controls and reviews.
- b. Licensees may make changes to Bases without prior NRC approval provided the changes do not require either of the following:
- 1. a change in the TS incorporated in the license; or
- 2. a change to the UFSAR or Bases that requires NRC approval pursuant to 10 CFR 50.59.
- c. The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the UFSAR.
- d. Proposed changes that meet the criteria of Specification 5.5.10b above shall be reviewed and approved by the NRC prior to implementation. Changes to the Bases implemented without prior NDr approvmal shallbe pronidda +to tka NRD on a frequency consistent with 10 CFR 50.71(e).
(continued)
FERMI - UNIT 2 5.0-16 Amendment No./ff'4, 16ý115,
