ML17262A897: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
 
(4 intermediate revisions by the same user not shown)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:EOP:AP-CCW.2TITLELOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE1of8ROCHESTERGASANDELECTRICCORPORATIONGINNASTATIONCONTROLLEDCOPYNUMBERTECHNICALREVIEWPORCREVIEWDATEPLANTSUPERINTENDENTEFECVEDATECATEGORY1.0REVIEWEDBY:9206160409920605'DRADOCK05000244P.PDR yJ4-2Ili'p EOP:AP-CCW.2TITLE:LOSSOFCCWDURINGPOWEROPERATIONREV'PAGE2of8A.PURPOSE-ThisprocedureprovidesthestepsnecessarytorespondtoalossofCCWwhiletheplantisatpower.B.ENTRYCONDITIONS/SYMPTOMS1.SYMPTOMS-ThesymptomsofLOSSOFCCWDURINGPOWEROPERATIONare;a~b.AnnunciatorA-13COMPCOOLINGSURGETANKLOLEVEL41.24,lit,orAnnunciatorA-22CCWPUMPDISCHARGELOPRESS60PSI,lit,orc.AnnunciatorA-17,MOTOROFF,RCP,CCP,lit,ord.e.gih.AnnunciatorA-9,RHRPUMPCOOLINGWATEROUTLETLOFLOW15GPM,litorAnnunciatorA-6,CONTSPRAYPUMPCOOLINGWATEROUTLOWFLOW15GPM,litorAnnunciatorA-14,SAFETYINZPUMPSCOOLINGWATEROUTLOFLOW25GPM,litorAnnunciatorA-7(A-15),RCPlA(1B)CCWRETURNHITEMPORLOFLOW165GPM125'F,litorAnnunciatorA-24(A-32),RCPlA(1B)OILLEVEL+'.25,lit.
{{#Wiki_filter:EOP:           TITLE REV: 9 AP-CCW.2                    LOSS OF CCW DURING POWER OPERATION PAGE 1 of 8 ROCHESTER GAS AND ELECTRIC CORPORATION GINNA STATION CONTROLLED COPY NUMBER TECHNICAL REVIEW PORC REVIEW DATE PLANT SUPERINTENDENT EF EC  VE DATE CATEGORY  1.0 REVIEWED BY:
C4 EOP:AP-CCW.2TITLE:LOSSOFCCWDURINGPOWEROPERATIONREV9PAGE3of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINED*****************************************CAUTIONIFCCWFLOWTOARCPISINTERRUPTEDFORGREATERTHAN2MINUTESORIFEITHERRCPMOTORBEARINGTEMPERATUREEXCEEDS200'F,THENCCWSHOULDBECONSIDEREDLOSTTOTHATRCP,REFERTOSTEP3.1CheckCCWPumpStatus:oAnnunciatorA-17,MotorOffRCPCCP-EXTINGUISHEDoBothCCWpumpbreakerwhitedisagreementlightsEXTINGUISHEDPerformthefollowing:a.VerifyautostartofstandbyCCWpumporstartmanually.b.IFAnnunciatorA-22,CCWpumpdischargelopress60psiLIT,THENcheckclosedCCWtoRHRHXs(MOV-738AandMOV-738B).  
9206160409 05000244 920605'DR ADOCK P            .           PDR


EOP:AP-CCW.2TITLELOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE4of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINEDNOTE:CCWsurgetanklevelshouldbeverifiedlocallyintheAuxBldg,ifpossible.2VerifyCCWSurgeTankLevelNormal:a.CCWsurgetanklevelAPPROXIMATELY50%ANDSTABLEa.OpenRMWtoCCWsurgetank(MOV-823)andstartaRMWpumpandperformthefollowing:IFsurgetanklevelisstableorincreasing,THENgotoStep3.IFsurgetanklevelcanNOTbemaintainedgreaterthan10%,THEN01)TriptheRx.2)TriptheRCPs.3)PlacebothCCWpumpsinpullstop.4)GotoE-O,REACTORTRIPorSAFETYINJECTION.
yJ 4
~e EOP:AP-CCW.2TITLE:LOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE5of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINED*****************************************CAUTIONIFANRCP(S)ISTRIPPEDDUETOALOSSOFCCW,SEALINJECTIONSHOULDBEMAINTAINEDTOTHEIDLERCP(S)UNTILRCSTEMPERATUREISLESSTHAN200'F,ORUNTILCCWISRESTORED.3CheckCCWToBothRCPs:oAnnunciatorA-7(A-15),RCP1A(1B)CCWreturnHitemporlowflow165gpm125'Falarm-EXTINGUISHEDoRCPmotorbearingstemperature(PPCSaddressGD-RCPSORRCPtemperaturemonitorRK-30Arecorder)-5200'FIFCCWlosttoRCP(s),THEN:a.TriptheRx.b.TripaffectedRCP(s).c.GotoE-O,REACTORTRIPorSAFETYINJECTION.4CheckCCWValveAlignment-NORMAL(RefertoAttachmentCONTROLROOMCCWALIGNMENTDURINGPOWEROPERATION)AlignCCWvalvesasnecessary.
2 I
M'EICs EOP:AP-CCW.2LOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE6of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINEDNOTE:oAnevaluationmustbemadetodetermineifoperationmaycontinuewhileinvestigatingaCCWleakincontainment.oOperationmaycontinuewiththereactorsupportcoolersisolated.Ifthisoccurs,notifyhighersupervision.5CheckForCCWLeakageInCNMT:a.CNMTsumpAlevels-NOTINCREASINGNOTICEABLYa.IFabnormalincreaseinCNMTsumplevel,THEN:l)DirectHPTechtosamplesumpAforchromates.2)PreparetomakeCNMTentrytocheckforCCWleak.b.RCPoillevels-NOTINCREASINGb.IFanyRCPoillevelincreasinguncontrollably,THEN:1)CloseCCWtoandfromaffectedRCP(s),(MOVs749Aand759Afor"A"RCP;MOVs749Band759Bfor"B"RCP).2)TripRx.3)TripaffectedRCP(s).4)GotoE-O,REACTORTRIPorSAFETYINJECTION.
p l
lJI EOP:AP-CCW.2LOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE7of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINED6CheckForCCWLeakageInAUXBLDG:oAuxBldgsumppump-INCREASEDSTARTFREQUENCY-OR-oWasteholduptanklevelUNEXPLAINEDINCREASEIFnoleakageindicatedinAUXBLDG,THEN:a.DirectHPTechtosampleCCWHxSWoutletforchromates,b.Gotostep10.-OR-oAuxBldg-VISUALLEAKAGEIDENTIFIED7Establish-THESOURCEOFTHECCWLEAKAGEANDISOLATE8VerifyCCWSurgeTankLevelNormal:oCCWsurgetanklevelAPPROXIMATELY50%IFCCWsurgetanklevelNOTapproximately50%,THENopenRMWtoCCWsurgetank,MOV-823,andstartaRMWpumptofillCCWsurgetanktoapproximately50%.9DirectHPToSampleForChromates10Verify-CONDITIONSPERMITCONTINUEDPOWEROPERATION,(RefertoTechnicalSpecificationSection3.3.3).IFshutdownrequired,THENreferto0-2.1,NORMALSHUTDOWNTOHOTSHUTDOWN.
i'
i EOP:AP-CCW.2LOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE8of8STEPACTION/EXPECTEDRESPONSERESPONSENOTOBTAINEDNOTE:Referto0-9.3,NRCSTATEANDCOUNTIESIMMEDIATENOTIFICATION,forreportingrequirements.11Complete-NOTIFICATIONTOHIGHERSUPERVISION12EstablishFurtherGuidance:a.Problemorleakage-CORRECTEDb.Returnto-APPROPRIATEOPERATINGPROCEDUREa.IFproblemNOTcorrectedorleakageNOTfoundorisolated,THENreturntoStep4.-END-


EOP:AP-CCW.2LOSSOFCCWDURINGPOWEROPERATIONREV:9PAGE1of1ATTACHMENTCONTROLROOMCCWALIGNMENTDURINGPOWEROPERATIONoCCWtoRHRHxAoCCWtoRHRHxBoCCWfromRCP1AThermalBarrieroCCWfromRCP1BThermalBarrieroCCWfromExLtdnHxIsolVlvoCCWSurgeTkVentoCCWtoCNMTIsolVlvoCCWtoRxSuppClrsIsolVlvoCCWfromRxSuppClrsIsolVlvoCCWtoRCP1AIsolVlvoCCWtoRCP1BIsolVlvoCCWfromRCP1AIsolVlvoCCWfromRCP1BIsolVlvoNRHXLtdnOutletTemp(Controller)MOV-738AClosedMOV-738BClosedAOV-754AOpenAOV-754BOpenAOV-745ClosedRCV-017OpenMOV-817OpenMOV-813OpenMOV-814OpenMOV-749AOpenMOV-749BOpenMOV-759AOpenMOV-759BOpenTCV-130Auto t'gfg,\  
EOP:           TITLE:
}}
REV' AP-CCW.2            LOSS OF CCW DURING POWER OPERATION PAGE 2  of 8 A. PURPOSE      This  procedure provides the steps necessary to respond    to  a loss of  CCW  while the plant is at power.
B. ENTRY CONDITIONS/SYMPTOMS
: 1. SYMPTOMS  The      symptoms  of LOSS OF CCW DURING POWER OPERATION are; a      Annunciator    A-13  COMP COOLING SURGE TANK LO    LEVEL  41.24,
              ~
lit,  or
: b. Annunciator    A-22  CCW PUMP  DISCHARGE LO PRESS  60 PSI, lit,  or
: c. Annunciator    A-17,  MOTOR OFF,  RCP,  CCP, lit, or Annunciator d.
15 GPM,  lit A-9, or RHR PUMP COOLING WATER OUTLET LO FLOW
: e. Annunciator A-6, FLOW 15 GPM,    lit or CONT SPRAY PUMP COOLING WATER OUT LOW Annunciator A-14,    SAFETY INZ PUMPS COOLING WATER OUT LO FLOW  25  GPM,  lit or gi Annunciator A-7 (A-15),
OR LO FLOW    165 GPM RCP 125'F,  litlAor(1B) CCW RETURN HI  TEMP
: h.      Annunciator A-24 (A-32),      RCP  lA (1B) OIL  LEVEL +'.25, lit.
 
C 4 EOP:            TITLE:
REV  9 AP-CCW.2              LOSS OF CCW DURING POWER OPERATION PAGE 3 of  8 STEP      ACTION/EXPECTED RESPONSE            RESPONSE  NOT OBTAINED
  **********************************    CAUTION IF CCW FLOW TO A RCP IS INTERRUPTED FOR GREATER THAN 2 MINUTES OR IF EITHER RCP MOTOR BEARING TEMPERATURE EXCEEDS 200'F, THEN CCW SHOULD BE CONSIDERED LOST TO THAT RCP, REFER TO STEP 3.
1  Check  CCW Pump    Status:              Perform the following:
o  Annunciator A-17, Motor Off  RCP      a. Verify auto start of standby  CCW CCP - EXTINGUISHED                        pump  or  start manually.
o  Both CCW pump breaker white          b. IF Annunciator A-22, CCW pump disagreement lights                      discharge lo press 60 psi LIT, EXTINGUISHED                              THEN check closed CCW to RHR HXs (MOV-738A and MOV-738B).
 
EOP:            TITLE REV: 9 AP-CCW.2            LOSS OF CCW DURING POWER OPERATION PAGE 4  of 8 STEP      ACTION/EXPECTED RESPONSE            RESPONSE  NOT OBTAINED NOTE:  CCW surge tank level should be verified locally in    the Aux Bldg,  if possible.
2  Verify  CCW  Surge Tank Level Normal:
: a. CCW surge tank  level                a. Open    RMW to  CCW  surge tank APPROXIMATELY 50% AND STABLE            (MOV-823) and start a RMW pump and perform the following:
IF surge tank level is stable or increasing, THEN go to Step 3.
IF surge tank level can      NOT be maintained greater than    10%,
THEN 0
: 1) Trip the    Rx.
: 2) Trip the    RCPs.
: 3) Place both    CCW  pumps in pull stop.
: 4) Go  to E-O,  REACTOR  TRIP or SAFETY INJECTION.
 
~e EOP:            TITLE:
REV: 9 AP-CCW.2                LOSS OF CCW DURING POWER OPERATION PAGE 5  of 8 STEP      ACTION/EXPECTED RESPONSE              RESPONSE  NOT OBTAINED CAUTION IF AN RCP(S) IS TRIPPED DUE TO A LOSS OF CCW, SEAL INJECTION SHOULD BE MAINTAINED TO THE IDLE RCP(S) UNTIL RCS TEMPERATURE IS LESS THAN 200'F,        OR UNTIL CCW  IS  RESTORED.
3  Check  CCW    To Both RCPs:            IF  CCW  lost to  RCP(s),  THEN:
o  Annunciator A-7 (A-15), RCP 1A        a. Trip the  Rx.
(1B) CCW return Hi temp or low flow 165 gpm 125'F alarm-              b. Trip affected RCP(s).
EXTINGUISHED
: c. Go  to E-O,  REACTOR  TRIP or o  RCP motor bearings temperature            SAFETY INJECTION.
(PPCS address GD-RCPS OR RCP temperature monitor RK-30A recorder) - 5 200'F 4  Check  CCW    Valve Alignment          Align CCW valves    as necessary.
NORMAL (Refer      to Attachment CONTROL ROOM CCW ALIGNMENT DURING POWER OPERATION)
 
M  'E I
Cs
 
EOP:
REV: 9 AP-CCW.2              LOSS OF CCW DURING POWER OPERATION PAGE 6    of 8 STEP      ACTION/EXPECTED RESPONSE                RESPONSE  NOT OBTAINED NOTE:  o  An evaluation must be  made  to determine  if  operation  may  continue while investigating a  CCW  leak in containment.
o  Operation may continue with the reactor support coolers isolated.
If this occurs, notify higher supervision.
5  Check For    CCW  Leakage  In CNMT:
: a. CNMT sump A  levels - NOT              a. IF abnormal increase      in  CNMT INCREASING NOTICEABLY                        sump  level,  THEN:
l) Direct  HP  Tech to sample sump A  for chromates.
: 2) Prepare to make CNMT      entry to check for CCW leak.
: b. RCP  oil levels  - NOT INCREASING        b. IF any  RCP  oil level  increasing uncontrollably,      THEN:
: 1) Close  CCW to and from affected RCP(s), (MOVs      749A and 759A for "A" RCP; MOVs 749B and 759B for "B" RCP).
: 2) Trip  Rx.
: 3) Trip affected RCP(s).
: 4) Go  to E-O,  REACTOR  TRIP  or SAFETY INJECTION.
 
l J
I
 
EOP:
REV: 9 AP-CCW.2            LOSS OF CCW DURING POWER OPERATION PAGE 7  of 8 STEP      ACTION/EXPECTED RESPONSE        RESPONSE  NOT OBTAINED 6  Check For  CCW  Leakage  In AUX  IF  no leakage  indicated in  AUX BLDG:                                BLDG,  THEN:
o  Aux Bldg sump pump - INCREASED    a. Direct  HP Tech to sample  CCW Hx START FREQUENCY                      SW outlet for chromates,
                    -OR-                  b. Go to step 10.
o  Waste holdup tank  level UNEXPLAINED INCREASE
                    -OR-o  Aux Bldg - VISUAL LEAKAGE IDENTIFIED 7  Establish -    THE SOURCE OF THE CCW  LEAKAGE AND ISOLATE 8  Verify CCW    Surge Tank Level      IF CCW surge tank level NOT Normal:                              approximately 50%, THEN open RMW to CCW surge tank, MOV-823, and start o  CCW surge tank level APPROXIMATELY 50%
a RMW pump to  fill to approximately 50%.
CCW surge tank 9  Direct  HP To  Sample For Chromates 10  Verify  CONDITIONS PERMIT          IF shutdown required, THEN refer to CONTINUED POWER OPERATION,          0-2.1, NORMAL SHUTDOWN TO HOT (Refer to Technical                SHUTDOWN.
Specification Section 3.3.3).
 
i EOP:
REV: 9 AP-CCW.2            LOSS OF CCW DURING POWER OPERATION PAGE 8  of 8 STEP      ACTION/EXPECTED RESPONSE            RESPONSE  NOT OBTAINED NOTE:  Refer to 0-9.3, NRC STATE  AND COUNTIES IMMEDIATE NOTIFICATION,  for reporting requirements.
11  Complete  NOTIFICATION TO HIGHER SUPERVISION 12  Establish Further Guidance:
: a. Problem or leakage -  CORRECTED      a. IF problem NOT corrected or leakage NOT found or isolated, THEN return to Step 4.
: b. Return to -APPROPRIATE OPERATING PROCEDURE
                                          -END-
 
EOP:
REV: 9 AP-CCW.2          LOSS OF CCW DURING POWER OPERATION PAGE 1  of 1 ATTACHMENT CONTROL ROOM CCW ALIGNMENT DURING POWER OPERATION o  CCW to RHR Hx A                            MOV-738A Closed o  CCW to RHR Hx B                            MOV-738B Closed o  CCW from  RCP 1A Thermal  Barrier          AOV-754A Open o  CCW from  RCP 1B Thermal Barrier            AOV-754B Open o  CCW from Ex Ltdn Hx  Isol Vlv              AOV-745 Closed o  CCW Surge Tk Vent                          RCV-017 Open o  CCW to CNMT  Isol Vlv                      MOV-817 Open o  CCW to Rx Supp Clrs Isol Vlv                MOV-813 Open o  CCW from Rx Supp Clrs Isol Vlv              MOV-814 Open o  CCW to RCP 1A Isol Vlv                      MOV-749A Open o  CCW to RCP 1B Isol Vlv                      MOV-749B Open o  CCW from RCP 1A Isol Vlv                    MOV-759A Open o  CCW from RCP 1B Isol Vlv                    MOV-759B Open o  NRHX Ltdn Outlet  Temp  (Controller)        TCV-130 Auto
 
t' gfg, \}}

Latest revision as of 10:43, 4 February 2020

Rev 9 to EOP AP-CCW.2, Loss of CCW During Power Operation.
ML17262A897
Person / Time
Site: Ginna Constellation icon.png
Issue date: 05/06/1992
From:
ROCHESTER GAS & ELECTRIC CORP.
To:
Shared Package
ML17262A884 List:
References
AP-CCW.2, NUDOCS 9206160409
Download: ML17262A897 (18)
v • d • e


Text

EOP: TITLE REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 1 of 8 ROCHESTER GAS AND ELECTRIC CORPORATION GINNA STATION CONTROLLED COPY NUMBER TECHNICAL REVIEW PORC REVIEW DATE PLANT SUPERINTENDENT EF EC VE DATE CATEGORY 1.0 REVIEWED BY:

9206160409 05000244 920605'DR ADOCK P . PDR

yJ 4

2 I

p l

i'

EOP: TITLE:

REV' AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 2 of 8 A. PURPOSE This procedure provides the steps necessary to respond to a loss of CCW while the plant is at power.

B. ENTRY CONDITIONS/SYMPTOMS

1. SYMPTOMS The symptoms of LOSS OF CCW DURING POWER OPERATION are; a Annunciator A-13 COMP COOLING SURGE TANK LO LEVEL 41.24,

~

lit, or

b. Annunciator A-22 CCW PUMP DISCHARGE LO PRESS 60 PSI, lit, or
c. Annunciator A-17, MOTOR OFF, RCP, CCP, lit, or Annunciator d.

15 GPM, lit A-9, or RHR PUMP COOLING WATER OUTLET LO FLOW

e. Annunciator A-6, FLOW 15 GPM, lit or CONT SPRAY PUMP COOLING WATER OUT LOW Annunciator A-14, SAFETY INZ PUMPS COOLING WATER OUT LO FLOW 25 GPM, lit or gi Annunciator A-7 (A-15),

OR LO FLOW 165 GPM RCP 125'F, litlAor(1B) CCW RETURN HI TEMP

h. Annunciator A-24 (A-32), RCP lA (1B) OIL LEVEL +'.25, lit.

C 4 EOP: TITLE:

REV 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 3 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED

                                                                    • CAUTION IF CCW FLOW TO A RCP IS INTERRUPTED FOR GREATER THAN 2 MINUTES OR IF EITHER RCP MOTOR BEARING TEMPERATURE EXCEEDS 200'F, THEN CCW SHOULD BE CONSIDERED LOST TO THAT RCP, REFER TO STEP 3.

1 Check CCW Pump Status: Perform the following:

o Annunciator A-17, Motor Off RCP a. Verify auto start of standby CCW CCP - EXTINGUISHED pump or start manually.

o Both CCW pump breaker white b. IF Annunciator A-22, CCW pump disagreement lights discharge lo press 60 psi LIT, EXTINGUISHED THEN check closed CCW to RHR HXs (MOV-738A and MOV-738B).

EOP: TITLE REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 4 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED NOTE: CCW surge tank level should be verified locally in the Aux Bldg, if possible.

2 Verify CCW Surge Tank Level Normal:

a. CCW surge tank level a. Open RMW to CCW surge tank APPROXIMATELY 50% AND STABLE (MOV-823) and start a RMW pump and perform the following:

IF surge tank level is stable or increasing, THEN go to Step 3.

IF surge tank level can NOT be maintained greater than 10%,

THEN 0

1) Trip the Rx.
2) Trip the RCPs.
3) Place both CCW pumps in pull stop.
4) Go to E-O, REACTOR TRIP or SAFETY INJECTION.

~e EOP: TITLE:

REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 5 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED CAUTION IF AN RCP(S) IS TRIPPED DUE TO A LOSS OF CCW, SEAL INJECTION SHOULD BE MAINTAINED TO THE IDLE RCP(S) UNTIL RCS TEMPERATURE IS LESS THAN 200'F, OR UNTIL CCW IS RESTORED.

3 Check CCW To Both RCPs: IF CCW lost to RCP(s), THEN:

o Annunciator A-7 (A-15), RCP 1A a. Trip the Rx.

(1B) CCW return Hi temp or low flow 165 gpm 125'F alarm- b. Trip affected RCP(s).

EXTINGUISHED

c. Go to E-O, REACTOR TRIP or o RCP motor bearings temperature SAFETY INJECTION.

(PPCS address GD-RCPS OR RCP temperature monitor RK-30A recorder) - 5 200'F 4 Check CCW Valve Alignment Align CCW valves as necessary.

NORMAL (Refer to Attachment CONTROL ROOM CCW ALIGNMENT DURING POWER OPERATION)

M 'E I

Cs

EOP:

REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 6 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED NOTE: o An evaluation must be made to determine if operation may continue while investigating a CCW leak in containment.

o Operation may continue with the reactor support coolers isolated.

If this occurs, notify higher supervision.

5 Check For CCW Leakage In CNMT:

a. CNMT sump A levels - NOT a. IF abnormal increase in CNMT INCREASING NOTICEABLY sump level, THEN:

l) Direct HP Tech to sample sump A for chromates.

2) Prepare to make CNMT entry to check for CCW leak.
b. RCP oil levels - NOT INCREASING b. IF any RCP oil level increasing uncontrollably, THEN:
1) Close CCW to and from affected RCP(s), (MOVs 749A and 759A for "A" RCP; MOVs 749B and 759B for "B" RCP).
2) Trip Rx.
3) Trip affected RCP(s).
4) Go to E-O, REACTOR TRIP or SAFETY INJECTION.

l J

I

EOP:

REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 7 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED 6 Check For CCW Leakage In AUX IF no leakage indicated in AUX BLDG: BLDG, THEN:

o Aux Bldg sump pump - INCREASED a. Direct HP Tech to sample CCW Hx START FREQUENCY SW outlet for chromates,

-OR- b. Go to step 10.

o Waste holdup tank level UNEXPLAINED INCREASE

-OR-o Aux Bldg - VISUAL LEAKAGE IDENTIFIED 7 Establish - THE SOURCE OF THE CCW LEAKAGE AND ISOLATE 8 Verify CCW Surge Tank Level IF CCW surge tank level NOT Normal: approximately 50%, THEN open RMW to CCW surge tank, MOV-823, and start o CCW surge tank level APPROXIMATELY 50%

a RMW pump to fill to approximately 50%.

CCW surge tank 9 Direct HP To Sample For Chromates 10 Verify CONDITIONS PERMIT IF shutdown required, THEN refer to CONTINUED POWER OPERATION, 0-2.1, NORMAL SHUTDOWN TO HOT (Refer to Technical SHUTDOWN.

Specification Section 3.3.3).

i EOP:

REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 8 of 8 STEP ACTION/EXPECTED RESPONSE RESPONSE NOT OBTAINED NOTE: Refer to 0-9.3, NRC STATE AND COUNTIES IMMEDIATE NOTIFICATION, for reporting requirements.

11 Complete NOTIFICATION TO HIGHER SUPERVISION 12 Establish Further Guidance:

a. Problem or leakage - CORRECTED a. IF problem NOT corrected or leakage NOT found or isolated, THEN return to Step 4.
b. Return to -APPROPRIATE OPERATING PROCEDURE

-END-

EOP:

REV: 9 AP-CCW.2 LOSS OF CCW DURING POWER OPERATION PAGE 1 of 1 ATTACHMENT CONTROL ROOM CCW ALIGNMENT DURING POWER OPERATION o CCW to RHR Hx A MOV-738A Closed o CCW to RHR Hx B MOV-738B Closed o CCW from RCP 1A Thermal Barrier AOV-754A Open o CCW from RCP 1B Thermal Barrier AOV-754B Open o CCW from Ex Ltdn Hx Isol Vlv AOV-745 Closed o CCW Surge Tk Vent RCV-017 Open o CCW to CNMT Isol Vlv MOV-817 Open o CCW to Rx Supp Clrs Isol Vlv MOV-813 Open o CCW from Rx Supp Clrs Isol Vlv MOV-814 Open o CCW to RCP 1A Isol Vlv MOV-749A Open o CCW to RCP 1B Isol Vlv MOV-749B Open o CCW from RCP 1A Isol Vlv MOV-759A Open o CCW from RCP 1B Isol Vlv MOV-759B Open o NRHX Ltdn Outlet Temp (Controller) TCV-130 Auto

t' gfg, \

Retrieved from "https://kanterella.com/w/index.php?title=ML17262A897&oldid=2433475"