ML082610221: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(StriderTol Bot change)
Line 966: Line 966:
V
V
                             - L '-
                             - L '-
                                " -"-"-:""'
                           "(Inspector                      Comrmissions  ,Natminal r    ,). o.,.      pmo:rcr o          :,r    .
                           "(Inspector                      Comrmissions  ,Natminal r    ,). o.,.      pmo:rcr o          :,r    .


Line 1,045: Line 1,044:
(.
(.
VCROSBY                                      CROSBY              VALVE W R ENNTH AM l
VCROSBY                                      CROSBY              VALVE W R ENNTH AM l
                                                                                            ,
GAGE M A SS CO M PANY FORM NV-1 FOR SAFETY AND SAFETY RELIEF VALVES                                    AQ.C..4-4C As required by the provisions of the ASME Code Rules DATA REPORT Safety and Safety Relief Valves I. Manufactured By Crosby Valve & Gage Co.,                  43 Kendrick St.,        Wrentham,        MA 02093 Name and Address 86                                  Contract Date          3/25/76National Board No.                  w.23 Model NO. HB-        -Urder No        300580J
GAGE M A SS CO M PANY FORM NV-1 FOR SAFETY AND SAFETY RELIEF VALVES                                    AQ.C..4-4C As required by the provisions of the ASME Code Rules DATA REPORT Safety and Safety Relief Valves I. Manufactured By Crosby Valve & Gage Co.,                  43 Kendrick St.,        Wrentham,        MA 02093 Name and Address 86                                  Contract Date          3/25/76National Board No.                  w.23 Model NO. HB-        -Urder No        300580J
: 2. Manufactured For Duke Power Co., Charlotte,                    No. Carolina          Order No.      A33957 Name and Address s.Owner        Duke Power Co., 422 "South Church St.,                    Charlotte,      North Carolina            28201 Name and Address
: 2. Manufactured For Duke Power Co., Charlotte,                    No. Carolina          Order No.      A33957 Name and Address s.Owner        Duke Power Co., 422 "South Church St.,                    Charlotte,      North Carolina            28201 Name and Address
Line 1,071: Line 1,069:
1~~                                                                                                                        \~JV
1~~                                                                                                                        \~JV


  . -
DUKE POWER COMPANY QUALITY ASSURANCE DEPARTMENT SUPPLIER QUALITY ASSURANCE CERTIFICATION Name of Supplier Crosby Valve & Gage Company                          Date      March 14,    1978 Address of Supplier Plant      43 Kendrick Street                    Mill Power Order No. A-33957 Wrentham,      Mass,    02093                                  Duke Item or Req. No.        Item 1 Spec. No. MCS-1205 .09-I        Rev.      I Supplier ID Nos.      N56925-00-0007,        N56925-00-00081        N56925-00-0009 Description of Component(s) or Material(s)        Steel Safety Valves X    Attached Documentation covers all      Components/Materials on Mill Power Order.
DUKE POWER COMPANY QUALITY ASSURANCE DEPARTMENT SUPPLIER QUALITY ASSURANCE CERTIFICATION Name of Supplier Crosby Valve & Gage Company                          Date      March 14,    1978 Address of Supplier Plant      43 Kendrick Street                    Mill Power Order No. A-33957 Wrentham,      Mass,    02093                                  Duke Item or Req. No.        Item 1 Spec. No. MCS-1205 .09-I        Rev.      I Supplier ID Nos.      N56925-00-0007,        N56925-00-00081        N56925-00-0009 Description of Component(s) or Material(s)        Steel Safety Valves X    Attached Documentation covers all      Components/Materials on Mill Power Order.
Attached Documentation covers partial      shipment of Components/Materials on Mill Power Order.
Attached Documentation covers partial      shipment of Components/Materials on Mill Power Order.
Line 1,136: Line 1,133:
Owner 6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 0c Y to-.. 1_-/        ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
Owner 6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 0c Y to-.. 1_-/        ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection
                      . .,.*
                         --              rome F Swan        Commissions          NC1524, N-I Inspector's 8ig- 9ture                                    National Board, State, Province and Endorsements C    Date                :_Zoo Page 2 of 2
                         --              rome F Swan        Commissions          NC1524, N-I Inspector's 8ig- 9ture                                    National Board, State, Province and Endorsements C    Date                :_Zoo Page 2 of 2


Line 1,161: Line 1,157:
CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI.
CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp N/A Certificate of Authorization No. N/A                                          Expiration Date N/A Signed -2            -      F! (r~        .lrOA Tech        ~n~i~li~t        Date      =5    1 '-    _42_
Type Code Symbol Stamp N/A Certificate of Authorization No. N/A                                          Expiration Date N/A Signed -2            -      F! (r~        .lrOA Tech        ~n~i~li~t        Date      =5    1 '-    _42_
                                       .. Grs .... OA
                                       .. Grs .... OA TechSpecalis
                                                        ..  ....
TechSpecalis
                         " Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the gmponents described in this Owner's Report during the period a - I/_ Q& to -3__/ -06and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.
                         " Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the gmponents described in this Owner's Report during the period a - I/_ Q& to -3__/ -06and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection.
Line 1,389: Line 1,383:
         *.._/9./- 6I* to. -./',*-        °: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
         *.._/9./- 6I* to. -./',*-        °: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection.
                    .-
e..f          ,.-A-Jerome F Swan        Commissions          NC1524, N-I or's tature                    SIwannspect      National Board, State, Province and Endorsements Date      -Ay    -_
e..f          ,.-A-Jerome F Swan        Commissions          NC1524, N-I or's tature                    SIwannspect      National Board, State, Province and Endorsements Date      -Ay    -_
Page 2 of 2
Page 2 of 2
Line 1,469: Line 1,462:
         *Signed                        FL Grass Jr,QA Tech Specialist          Date      .- i7
         *Signed                        FL Grass Jr,QA Tech Specialist          Date      .- i7
* Owner qOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period iLZ-8          to          Y; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
* Owner qOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period iLZ-8          to          Y; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this iinspection.
* iinspection.
rome F Swan        Commissions          NC1524, N-I SInspector's Prg~ature                                  National Board, State, Province and Endorsements C  SDat~e,,3--      g      .
rome F Swan        Commissions          NC1524, N-I SInspector's Prg~ature                                  National Board, State, Province and Endorsements C  SDat~e,,3--      g      .
Page 2 of 2
Page 2 of 2
Line 2,590: Line 2,582:
By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the component described in this Data Report. Furthermore. neither the inspector nor his employer shall be liable in any manner for any personal injury or properly damage or loss of any kind arising from or connected with this inspection.
By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the component described in this Data Report. Furthermore. neither the inspector nor his employer shall be liable in any manner for any personal injury or properly damage or loss of any kind arising from or connected with this inspection.
Date        08/09/06      Signed                                    Commissions                                IL 1903 IqNat'LBd. (Ind. endorsements) and stale or pro,. and no.)
Date        08/09/06      Signed                                    Commissions                                IL 1903 IqNat'LBd. (Ind. endorsements) and stale or pro,. and no.)
Todd  ard
Todd  ard (1) For manually operated valves only.
                                                                                                                                                      %
(1) For manually operated valves only.


/
/
Line 2,762: Line 2,752:
Type Code Symbol Stamp N/A Certificate of Authorization No. N/A                                Expiration Date N/A Signed S-e            ý  FL Grass JrQA Tech Specialist            Date -4Z6        .zV Owner orowner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 7 to//-2 10e; and state that to the best of my knowledge and belief, the Owner has performed'dxardinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
Type Code Symbol Stamp N/A Certificate of Authorization No. N/A                                Expiration Date N/A Signed S-e            ý  FL Grass JrQA Tech Specialist            Date -4Z6        .zV Owner orowner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 7 to//-2 10e; and state that to the best of my knowledge and belief, the Owner has performed'dxardinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injur r property damage or a loss of any kind arising from or connected with this 4-/n-sp-*to I/ inspection"Z.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injur r property damage or a loss of any kind arising from or connected with this 4-/n-sp-*to I/ inspection"Z.
Inspector's Si6jn'
Inspector's Si6jn' ye rome F Swan        Commissions          NC1524, N-I National Board, State, Province and Endorsements I
                            .,,
ye rome F Swan        Commissions          NC1524, N-I National Board, State, Province and Endorsements I
Page 2 of 2
Page 2 of 2


Line 2,951: Line 2,939:
                 ;  T i-~                      -
                 ;  T i-~                      -
                                               .1~'
                                               .1~'
                                                    .,.
                                                     \    I.
                                                     \    I.


Line 2,979: Line 2,966:
PO No. DP20357, PO Item 0060, Duke Item No. IMV-560 CNI SO No. 28451.06 End Cap Bolts: HL # 150722 Valve supplied with Gear Operator CERTIFICATION OF DESIGN Design Specifications certified by                    Jesse M. Hawkins                P.E. State        NC      Reg. no.            20159 Design Report certified by                              N/A                          P.E. State        NIA      Reg. no.              N/A CERTIFICATE OF COMPLIANCE We certi*fy that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code. Section III. Division 1.
PO No. DP20357, PO Item 0060, Duke Item No. IMV-560 CNI SO No. 28451.06 End Cap Bolts: HL # 150722 Valve supplied with Gear Operator CERTIFICATION OF DESIGN Design Specifications certified by                    Jesse M. Hawkins                P.E. State        NC      Reg. no.            20159 Design Report certified by                              N/A                          P.E. State        NIA      Reg. no.              N/A CERTIFICATE OF COMPLIANCE We certi*fy that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code. Section III. Division 1.
N Certificate of Authorization No.                            N-2899                    Expires          September 24. 2008 Date          August 30. 2006          Name              CRANE Nuclear, Inc.            Signed IN Cenftate Hol1cg)                            /  . UMWL-.-5 JOM                  S. GAEngR;;
N Certificate of Authorization No.                            N-2899                    Expires          September 24. 2008 Date          August 30. 2006          Name              CRANE Nuclear, Inc.            Signed IN Cenftate Hol1cg)                            /  . UMWL-.-5 JOM                  S. GAEngR;;
I
I CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of            Illinois              and employed by                                      HSBCT of          Hartford, CT        have inspected the pump, or valve, described in this Data Report on                        August 30. 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code. Section III. Division 1.
                                                                                                      "
CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of            Illinois              and employed by                                      HSBCT of          Hartford, CT        have inspected the pump, or valve, described in this Data Report on                        August 30. 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code. Section III. Division 1.
By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Date        08130/06        Sign              -
Date        08130/06        Sign              -
Line 3,135: Line 3,120:
91474Jerome                                F Swan    Commissions            NC1524, N-I Inspector's i atre                                      National Board, State, Province and Endorsements 6
91474Jerome                                F Swan    Commissions            NC1524, N-I Inspector's i atre                                      National Board, State, Province and Endorsements 6
       /Datez    V1/7.
       /Datez    V1/7.
                    ,
Page 2 of 2
Page 2 of 2


Line 3,385: Line 3,369:
dale) 6,      Pump or valve              7        Gate Valve                  Nominal inlet size                6 (in.)
dale) 6,      Pump or valve              7        Gate Valve                  Nominal inlet size                6 (in.)
Outlet size
Outlet size
                                                                                                                                          *
                                                                                                                                                     -<<6 (in.)
                                                                                                                                                     -<<6 (in.)
: 7.      Malerial:
: 7.      Malerial:
Line 3,393: Line 3,376:
           -  Holder's                          Board                          Serial                            Serial                              Serial
           -  Holder's                          Board                          Serial                            Serial                              Serial
         . -erial No.                              No.                            No.                                No.                                No.
         . -erial No.                              No.                            No.                                No.                                No.
N/A                        1' 05896                        Y' D5908                            -'05916 N/A                  ...,    05897                        V      g5909                      o-,_ D5917 N/A                      ',    05898                          ,,_5910                        _.O5918 NA                              5899                                                                0D59119
N/A                        1' 05896                        Y' D5908                            -'05916 N/A                  ...,    05897                        V      g5909                      o-,_ D5917 N/A                      ',    05898                          ,,_5910                        _.O5918 NA                              5899                                                                0D59119 J.
__________________________________
J.
87zzz+/-3                              12+/-S(8 4    V X,
87zzz+/-3                              12+/-S(8 4    V X,
nation in items I through 4 on
nation in items I through 4 on
Line 3,416: Line 3,397:
i.ijfificae 01i        -r      , iNo.                              N,2899 ....                    Expires          Septeamer 24, 2008:
i.ijfificae 01i        -r      , iNo.                              N,2899 ....                    Expires          Septeamer 24, 2008:
4~t ~ J2/f V 2 rCRANE sr~e                        ciearl i~Ce1rizt4~zeq*..
4~t ~ J2/f V 2 rCRANE sr~e                        ciearl i~Ce1rizt4~zeq*..
                                                                                                              ."                  _
Jon..,re
Jon..,re
                                                                                                                                       -ij    . S. A    niee,'
                                                                                                                                       -ij    . S. A    niee,'
Line 3,429: Line 3,409:
2/27/06&#xfd;k4iecl                                                                                                    2 (1) For rc"nntieiy operatedcl'aves only.
2/27/06&#xfd;k4iecl                                                                                                    2 (1) For rc"nntieiy operatedcl'aves only.
                                                                           *          ~
                                                                           *          ~
          ,,,,  .
                                                                                       .... 'A  -.
                                                                                       .... 'A  -.


Revision as of 21:52, 12 March 2020

Inservice Inspection Report for End of Cycle 18 (EOC-18)
ML082610221
Person / Time
Site: Mcguire
Issue date: 07/09/2008
From: Brandi Hamilton
Duke Energy Carolinas, Duke Energy Corp
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML082610221 (287)
v • d • e


Text

{{#Wiki_filter:BRUCE H HAMILTON Diuke Vice President E~nergy McGuire Nuclear Station Duke Energy Corporation MGO1 VP /12700 Hagers Ferry Road Huntersville, NC 28078 704-875-5333 704-875-4809 fax bhhamilton@duke-energy.com July 9, 2008 U.S. Nuclear Regulatory Commission Document Control Desk Washington, D.C. 20555-0001

SUBJECT:

Duke Energy Carolinas, LLC (Duke) McGuire Nuclear Station - Unit 2 Docket No. 50-370 Inservice Inspection Report Attached is the Inservice Inspection Report for the end of cycle 18 (EOC-1 8) refueling outage for McGuire Nuclear Station (MNS), Unit 2. Attachment No. 1 is the Inspection Report performed in accordance with the last outage of the First Inspection Period of the Third 10-Year Inservice Inspection Interval. Reportable Indications One reportable indication was found on 2RCHP-IN during the RT examination. Plan addenda 2MNS-034 was written to schedule one additional sample examination using ASME Section Xl, IWC-2430 requirements of the 1998 Edition of ASME Section Xl with the 2000 Addenda. The additional sample was scheduled and performed during EOC-1 8 and found to be acceptable. The-reportable indication found during the RT examination was repaired. No code surveillance inspections are required because the indication was repaired and found acceptable on 4-13-08. Section 4.4 of the attached report lists the limited examination item numbers. A relief request is under development and will be submitted to the NRC for review and approval to address weld limitations found during this outage. This letter and attachments do not contain any new NRC commitments. www. duke-ehergy corn

U. S. Nuclear Regulatory Commission July 9, 2008 Page 2 Questions regarding the attached report may be directed to Kay L. Crane at (704) 875-4306. Bruce Hamilton

U. S. Nuclear Regulatory Commission July 9, 2008 Page 3 L. A. Reyes, Regional Administrator U.S. Nuclear Regulatory Commission, Region II Atlanta Federal Center 61 Forsyth St., SWW, Suite 23T85 Atlanta, GA 30303 John Stang U. S. Nuclear Regulatory Commission Office of Nuclear Reactor Regulation Mail Code Washington, DC 20555-0001 Joe Brady NRC Senior Resident Inspector McGuire Nuclear Station

U. S. Nuclear Regulatory Commission July 9, 2008 Page 4 bxc: EC050-ELL RGC File

INSERVICE INSPECTION REPORT Duke Energy Carolinas McGuire Nuclear.Station Unit 2 Eighteenth Refueling Outage Ene.. .

FORM NIS-1 OWNER'S REPORT FOR INSER VICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner:Duke Enerav Carolinas, 526 S. Church St., Charlotte, NC 28201-1006 (Name and Address of Owner)
2. Plant: McGuire Nuclear Station, 12700 Hager's Ferry Road Huntersville, N.C. 28078 (Name and Address of Plant)
3. Plant Unit: 2 4. Owner Certificate of Authorization (if required) N/A
5. Commercial Service Date: March 1, 1984 6. National Board Number for Unit 84
7. Components Inspected:

Component or Manufacturer or Manufacturer or State or National Appurtenance Installer Installer Serial Province No. Board No. No. See Section 1.1 in the Attached Report Note: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. Total number of pages contained in this report 282

FORM NIS-1 (Back)

8. Examination Dates November 12, 2006 to April 13, 2008 d.. Inspection Period Identification: Second Period
10. Inspection Interval Identification: Third Interval
11. Applicable Edition of Section XI 1998 Addenda 2000
12. Date/ Revision of Inspection Plan: June 20, 2006 /Revision 2
13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Sections 2.0, 3.0 and 6.0
14. Abstract of Results of Examinations and Tests. See Section 4.0 and 6.0
15. Abstract of Corrective Measures. See Subsection 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section Xl.

Certificate of Authorization No. (if applicable) N/A Expiration Date N/A Date Signed Duke Energy By4 TxJ( NtZ 2 z___ Carolina's. Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina employed by

  • HSBCT have inspected the components described in this Owner's Report during the period November 12, 2006 to April 13, 2008 and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any mannerfor any personal injury or property damage or a loss of any kind arising from or connected with this inspection F/* .-- ,, - - Commissions N.C. 1524 LN Inspe6tdr's Signature National Board, State, Province, and Endorsements Date

  • Hartford Steam Boiler of Connecticut 200 Ashford Center North Suite 205 Atlanta, GA. 30338-4860 (800) 417-3721 www.hsbct.com

OWNER'S REPORT FOR INSER VICE INSPECTIONS MCGUIRE UNIT 2 2008 REFUELING OUTAGE 3 / EOC 18 (Third Interval) Plant Location: McGuire Nuclear Station 12700 Hager's Ferry Road Huntersville, North Carolina 28078 - 9340 NRC Docket No. 50-370 National Board No. 84 Commercial Service Date: March 1, 1984 Document Completion Date: - Owner: Duke Energy Carolinas 526 South Church Street Charlotte, N.C. 28201-1006 Revision 0 Prepared By: ~KVX~ ,N~f A Date Co-[I- 200 F Reviewed By: ~ C Date Approved By: Date 2,5ý 66

DISTRIBUTION LIST

1. Duke Energy Carolinas Nuclear Technical Services Division Section XI Inspection Program Section
2. McGuire Inspection Services (ISI Coordinator)
3. NRC Document Control Desk
4. HSBCT (AIA) c/o ANII at McGuire
5. State of North Carolina Department of Labor c/o J. M. Givens, Jr.

TABLE OF CONTENTS Section Title Revision 1.0 General Information 0 2.0 Third Ten-Year Interval Inspection Status 0 3.0 Final Inservice Inspection Plan 0 4.0 Results of Inspections Performed 0 5.0 Owner's Report for Repair / Replacement Activities 0 6.0 Pressure Testing 0 __1

1.0 General Information This report describes the Inservice Inspection of Duke Energy Carolina's McGuire Nuclear Station Unit 2 during Outage 3 / EOC18. This is the first Outage of the Second Inspection Period of the Third Ten-Year Interval. ASME Section XI, 1998 Edition with the 2000 Addenda, was the governing Code for selection and performance of the ISI examinations. Included in this report are the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective action(s) taken when reportable conditions were found. In addition, there is an Owner's Report for the Repair / Replacement Section included for completed NIS-2 documentation of repairs and replacements. 1.1 Identification Numbers Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No. Reactor Vessel Rotterdam 30664 NC-201819 -- Pressurizer Westinghouse 1491 NC-201818 W10285 Steam Generator 2A BWI 7700-02 NC-302674 159 Steam Generator 2B BWI 7700-04 NC-302675 161 Steam Generator 2C BWI 7700-01 NC-302676 158 Steam Generator 2D BWI 7700-03 NC-302677 160 Centrifugal Charging Pump Pacific Pumps 2A - 48584 N/A 25 2B1- 48585 28 Containment Spray Heat Delta Southern Co. 2A-35005-73-3 NC-234203 3396 Exchanger Joseph Oat & (2B) 2514 NC-201822 5765 Sons, Inc. Excess Letdown Heat Westinghouse 1810 NC-234264 1555 Exchanger _ Letdown Heat Exchanger Joseph Oat & 2049-2B NC-201842 553 Sons, Inc. Reciprocating Charging Union Pump Co. N7210318-604 N/A N/A Pump I I I _ I McGuire Unit 2 Page I of 5 Outage 3/EOC-18 Revision 0 Section 1 June 11, 2008

1.1 Identification Numbers (Continued) Manufacturer National Manufacturer or Installer State or Board Item or Installer Serial No. Province No. No. 2A 5-114E841 G02 Reactor Coolant Pump Westinghouse 2B 6-114E841 G02 N/A N/A 2C 7-114E841 G02 2D 8-114E841G02 Reciprocating Charging Metal Bellows Company 74730-002 N/A 002 Pump Accumulator Reciprocating Charging Richmond Engineering N-2409.20 N/A 75220 Pump Suction Stabilizer Supply Co. Residual Heat Joseph Oat & Sons, Inc. 2A 2046-2C NC-1 69800 637 Removal Heat 2B 2046-2D NC-201823 638 Exchanger Safety Injection Pump Pacific Pumps 2A 49357 N/A 130 2B 49358 131 Regenerative Heat Joseph Oat & Sons, Inc. 2047-2B NC-201817 628 Exchanger 629 630 Seal Water Heat Atlas Industrial 1767 NC 201827 1549 Exchanger Manufacturing Company Seal Water AMF Cuno 2A - 20 N/A 4364 Injection Filter 2B - 22 4365 Main Steam Supply to Duke Power Co. SA N/A 62 Auxiliary Equipment System Containment Air Release Duke Power Co. VQ N/A 56 and Addition System Main Steam System Duke Power Co. SM N/A 70 Main Steam Vent to Duke Power Co. SV N/A 67 Atmosphere System Reactor Coolant System Duke Power Co. NC N/A 82 McGuire Unit 2 Page 2 of 5 Outage 3/EOC-18 Revision 0 Section 1 June 11, 2008

1.1 Identification Numbers (Continued) Manufacturer Manufacturer or Installer State or National Item or Installer Serial No. Province No. Board No. Liquid Waste Recycle Duke Power Co. WL N/A 76 System Refueling Water System Duke Power Co. FW N/A 54 Auxiliary Feedwater Duke Power Co. CA N/A 73 System Residual Heat Removal Duke Power Co. IND N/A 63 System .__ __ Nuclear Service Water Duke Power Co. RN N/A 60 System Chemical & Volume Duke Power Co. NV N/A ,80 Control System ComponentCooling Duke Power Co. KC N/A , 78 System Main Feedwater System Duke Power Co. CF N/A 61 Containment Spray Duke Power Co. NS N/A 69 System Containment Ventilation Duke Power Co. RV N/A 72 Cooling Water System Safety Injection System Duke Power Co. NI N/A 83 Diesel Generator Engine Duke Power Co. KD N/A 47 Cooling Water System Spent Fuel Cooling Duke Power Co. KF N/A 81 System Diesel Generator Engine Duke Power Co. LD N/A 51 Lube Oil System Unit 2 Duke Power Co. N/A N/A 84 McGuire Unit 2 Page 3 of 5 Outage 3/EOC-18 Revision 0 Section 1 June 11, 2008

1.2 Personnel, Equipment and Material Certifications All personnel who performed or evaluated the results of inservice inspections during the time frame bracketed by the examination dates shown on the NIS-1 Form were certified in accordance with the requirements of the 1998 Edition of ASME Section XI with the 2000 addenda including Appendix VII for ultrasonic inspections. In addition, ultrasonic examiners were qualified in accordance with ASME Section XI, Appendix VIII, and the 1998 Edition with the 2000 Addenda through the Performance Demonstration Initiative (PDI) for Supplements 2, 3, 4, 6, 8, and 10. Preservice examinations of weld overlays were conducted in accordance with Code Case N-504-2 including non-mandatory Appendix Q. The appropriate certification records for each inspector, calibration records for inspection equipment, and records of materials used (i.e. NDE consumables) are on file at McGuire Nuclear Station or copies may be obtained by contacting Duke Energy Carolina's Corporate Office in Charlotte, North Carolina. The copies of the certification records for the Atlantic Group and the Washington Group International inspectors can be obtained by contacting Duke Energy Carolina's Corporate Office in Charlotte, North Carolina. 1.3 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke's Corporate Office in Charlotte, North Carolina:

1. Code Case N-460 (Applicable to items in this report where less than 100%

coverage of the required weld examination volume was achieved.) These items are identified on Inspection Results that are located in Section 4.0 of this report.

2. Problem Investigation Process M-07-0323 and M-08-1192 (Covers categorizing Containment Spray Heat Exchanger Support Lugs M2.D1.10.0023).
3. Problem Investigation Process M-08-2342 and M-08-3061 (Covers inspection discrepancies and limitation for hanger 2MCR-NC-4292 (M2.F1.10.0003).
4. Problem Investigation Process M-08-1705 (Covers rejectable indications and limitations on 2RCHP-IN (M2.R1.11.0279). Addresses additional sample of 2RCHPSS-OUT-1 (M2.R1.11.0278).
5. RFR 03-002 (Class 1, 2 and 3 snubber examination under station technical
           ,specification)

McGuire Unit 2 Page 4 of 5 Outage 3/EOC-18 Revision 0 Section 1 June 11, 2008

6. RFR 01-005 (Risk Informed Inservice Inspection Program Submittal)
7. RFR 01-008 (Risk Informed ISI Alternative to Use VT-2 Instead of Volumetric Examination of Socket Welds) 1.4 Augmented and Elective Examinations Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section XI Code; therefore, it is exempt from ANII review, verification, and / or record certification.

1.5 Responsible Inspection Aaencv B B m I Hartford Steam Boiler of Connecticut (HSBCT) is responsible for the third party inspections required by ASME Section XI. Authorized Nuclear Inservice Inspector(s) Name: , J.F. Swan Employer: HSBCT Business 200 Ashford Center North Address: Suite 205 Atlanta, GA 30338-4860 (800) 417-3721 www.hsbct.com McGuire Unit 2 Page 5 of 5 Outage 3/EOC-18 Revision 0 Section 1 June 11, 2008

2.0 Third Ten-Year Interval Inspection Status The completion status of inspections required by the 1998 Edition of ASME Section XI with the 2000 addenda is summarized in this section. The requirements are listed by the ASME Section Xl Examination Category as defined in Table IWB-2500-1 for Class 1 Inspections, Table IWC-2500-1 for Class 2 Inspections, and IWF-2500-1 for Class 1, 2 and 3 Component Supports. Augmented, Elective, and Risk Informed Inspections are also included. During the McGuire Third 10 Year Interval piping welds will be examined under the Risk Informed Inservice Inspection Program developed in accordance with methodology contained in the Westinghouse Owner's Group (WOG) Topical Report, WCAP-14572, Revision 1-NP-A. Request for Relief 01-005 was submitted to the NRC seeking approval to incorporate the Risk Informed Program into the Third 10 Year Interval ISI Plan for McGuire Unit 2. The NRC approved use of this program per SER dated June 12, 2002. Previous code examination Categories B-F, B-J, C-F-i, and C-F-2 will now be combined under the new Risk Informed Category R-A. Class 1 Inspections Examination Description Inspections Inspections Percentage 'Deferral Category Required Completed Completed Allowed B-A Pressure Retaining Welds 15 3 20.00% Yes in Reactor Vessel B-B Pressure Retaining Welds 5 1 20.00% No in Vessels Other than Reactor Vessel B-D Full Penetration Welded 36 10 27.77% Partial Nozzles in Vessels Inspection Program B Reference B-F Pressure Retaining Risk Dissimilar Metal Welds in Informed Vessel Nozzles Program R01. Items B-G-1 Pressure Retaining Bolting 241 89 36.92% Yes Greater than 2" in Diameter B-G-2 Pressure Retaining Bolting 22 8 36.36% No 2" and Less in Diameter I McGuire Unit 2 Page 1 of 5 Outage 3/EOC-18 Revision 0 Section 2 June 11, 2008

Class 1 Inspections (Continued) Examination Description Inspections Inspections Percentage IDeferral Category Required Completed Completed Allowed Reference B-J Pressure Retaining Welds Risk No in Piping Informed Program R01. Items B-K Welded Attachments for 6 4 66.66% No Vessels, Piping, Pumps and Valves B-L-1 Pressure Retaining Welds N/A N/A N/A Yes in Pump Casings B-L-2 Pump Casings 1, 0 00.00% Yes B-M-1 Pressure Retaining N/A N/A N/A Yes Welds in Valve Bodies B-M-2 Valve Body > 4 in. 9 3 33.33% Yes Nominal Pipe Size B-N-1 Interior of Reactor Vessel 3 2 66.66% No B-N-2 Welded Core Support Structures and Interior 2 0 00.00% Yes Attachments to Reactor Vessel B-N-3 Removable Core Support 1 0. 00.00% Yes Structures B-O Pressure Retaining Welds 3 1 33.33% Yes in Control Rod Housings B-P All Pressure Retaining REFERENCE SECTION 6.0 OF THIS REPORT Components B-Q Steam Generator Tubing See Note below F-A Class 1 Component 58 26 44.82% No F01.010 Supports . (Code Case N-491) Note: Steam Generator Tubing is examined and documented by the Steam Generator Maintenance Group of the Station Support Division as required by the Station Technical Specifications and is not included in this report. McGuire Unit 2 Page 2 of 5 Outage 3/EOC-18 Revision 0 Section 2 June 11, 2008

1 Deferral of inspection to the end of the interval as allowed by ASME Section Xl Table IWB 2500-1. These examination categories are exempt from percentage requirements per IWB-2412 (a), Inspection Program B. Class 2 Inspections Examination Description Inspections Inspections Percentage Deferral Category Required Completed Completed Allowed C-A Pressure Retaining Welds 28 *3 *10.71% No in Pressure Vessels C-B Pressure Retaining Nozzle 11 5 45.45% No Welds in Vessels C-C Welded 'Attachments for 17 8 47.05% No Vessels, Piping, Pumps and Valves C-D Pressure Retaining Bolting -N/A N/A N/A N/A Greater Than 2" in Diameter Reference C-F-1 Pressure Retaining Welds Risk Informed in Austenitic Stainless Program R01. Steel or High Alloy Piping Items Reference C-F-2 Pressure Retaining Welds Risk Informed in Carbon or Low Alloy Program R01. Steel Piping Items C-G Pressure Retaining Welds 7 4 57.14% No in Pumps and Valves C-H All Pressure Retaining REFERENCE SECTION 6.0 OF THIS Components REPORT F-A Class 2 Component 229 109 47.59% No Supports F01.020 (Code Case N-491)

  • Seven (7) welds were scheduled for examination in period one and three (3) were examined. The four (4) that were not examined were welds in the Regenerative Heat Exchanger. In previous intervals, relief from examination of these welds was granted based on hardship associated with radiation exposure. A similar relief request may be submitted for this interval or, alternatively, these welds may be eliminated from scope using Code Case N-706.

McGuire Unit 2 Page 3 of 5 Outage 3/EOC-18 Revision 0 Section 2 June 11, 2008

Additional Component Support Examinations Class 1, 2 and 3 Examination Description Inspections Inspections Percentage Deferral Category Required Completed Completed Allowed F-A Supports other than Piping 42 22 52.38% No F01.040 Supports Class 1, 2 & 3 F-A Component Supports No F01.050 Snubbers Class 1, 2 & 3

  • Inspections to be performed per Relief Request 03-002 Risk Informed Inservice Inspection Program Class 1 and 2 Examination Description Inspections Inspections Percentage Deferral Category Required Completed Completed Allowed R-A Piping Examinations Class 89 37 41.57% No 1 and 2 Weld Overlay Section XI Appendix Q Examination Description Inspections Inspections Percentage Deferral Category Required Completed Completed Allowed M2.Q1.1 Weld Overlay 6 6 100% No Augmented I Elective Inspections Summary Description PercentageComplete Number M2.G1.1 Reactor Coolant Pump Flywheels 100% of Outage 3/EOC-18 Requirements Met M2.G2.1 RPV Closure Head Studs and Nuts per No examinations required for Outage 3/EOC-18 Nuclear Guide 1.65 M2.G3.1 Pipe Rupture Protection 100% of Outage 3/EOC-18 Requirements Met M2.G5.1 RPV Head Penetration Nozzles No examinations required for Outage 3/EOC-18 M2.G5.2 RPV Vent Line No examinations required for Outage 3/EOC-18 McGuire Unit 2 Page 4 of 5 Outage 3/EOC-18 Revision 0 Section 2 June 11, 2008

Augmented / Elective Inspections Continued Summary Description PercentageComplete Number M2.G6.2 Pressurizer Manway 100% of Outage 3/EOC-18 Requirements Met McGuire Unit 2 Page 5 of 5 Outage 3/EOC-18 Revision 0 Section 2 June 11, 2008

3.0 Final Inservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section XI Class 1, Class 2, Class 3 Augmented and Risk Informed examinations credited for this report period. The information shown below is a field description for the reporting format included in this section of the report:

SUMMARY

NUMBER = ASME Section XI Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2 ), Augmented Requirements ID NUMBER = Unique Identification Number SYS = Component System Identification ISO / DWG NUMBERS - Location and / or Detail Drawings PROC = Examination Procedures INSP REQ - Examination Technique - Magnetic Particle, Dye Penetrant, etc. MAT/ SCH = General Description of Material DIA / THICK = Diameter / Thickness CAL BLOCKS = Calibration Block Number COMMENTS = General and / or Detail Description McGuire Unit 2 Page 1 of 1 Outage 3/EOC-18 Revision 0 Section 3 June 11, 2008

DUKE ENEWW~ NUCLEAR TECHNIC.i SERVICES ScheduleWorks Inservice Inspection Database Management System Plan Report ______McGuire 2, 3rd Interval, Outage 3 (EOC-18) This report includes all changes through addendum 2MNS-037 Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / Historical Data Category AUG M2.G1.1. 0004 G01.001.004, G01.001.004A 2RCP-2D NC MCM 1201.01-7 NDE-900 UT CS 0.000 / 0.000 REACTOR COOLANT PUMP FLYWHEEL MC1201.01-7, MC-ISIN3- Component AUGMENTED EXAMINATION. REFERENCE Class 1 2553-01.00 NRC LETTER DATED AUGUST 5, 2004 MCM 1201.01-0080 AMENDMENT NO. 205 TO RENEW FACILITY OPERATING LICENSE NPF-17. THIS AMENDMENT REVISES TS 5.5.7 REACTOR COOLANT PUMP FLYWHEEL INSPECTION PROGRAM TO INCREASE THE INSPECTION INTERVAL FROM 10 TO NOT EXCEED 20 YEARS. PER NOTE FROM STEVE ROSENAU DATED 10/29/2004 THE SCHEDULE IS AS FOLLOWS: 2RCP-2A WILL BE DONE 2EOC-24, LAST UT EXAM 3/28/1999 (ON 2A PUMP), 2RCP-2B WILL BE DONE 2EOC-22, LAST UT EXAM 1/1/1996 (ON 1D PUMP), 2RCP-2C WILL BE DONE 2EOC-24, LAST UT EXAM 9/23/1999 (ON 1C PUMP), 2RCP-2D WILL BE DONE 2EOC-24, LAST UT EXAM 6/10/1998 (ON 1B PUMP) IT SHOULD BE NOTED THAT THE FLYWHEELS HAVE BEEN MOVED AROUND AND EXAMINATION DATE MAY NOT APPLY TO THE CURRENT PUMP LOCATION. THSES OUTAGES EXCEPT 2EOC-22 (3RD INTERVAL) WILL BE PART OF THE FOURTH INTERVAL AND THEY MUST BE INCLUDED WHEN THE ISI PLAN IS WRITTEN. NOTE: ANY REACTOR COOLANT PUMP REMOVED FROM SERVICE BEFORE THIS TIME SHOULD BE EXAMINED BEFORE REMOVAL, PSI DONE ON THE REPLACEMENT AND THE SCHEDULE WILL BE RECALCULATED FOR THE NEW 20 YEAR EXAMINATION DATE. 2RCP-2D was examined EOC-1 8 (2008). The 20 year examination date will be rescheduled to start from this inspection date. McGuire 2 6/11/2008 7:28:10AM Page 1 of 19 Printed 06/11/08 GJU8302 Printed 06/11/08 01/19/08 GJU8302 v.v. 01/19/08 SDQA Cat "C" SDQA Cat "C" McGuire 2 6/11/2008 7:28: 10 AM Page 1 of 19

This report includes all changes throvqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / HistoricalData Cateaobrv AUG M2.G3.1.0001 G03.001.004, G03.001.004A 2NC2FW22-7 NC MCFI-2NC22 NDE-35 PT SS 1.000 / 10.000 AUGMENTED EXAMINATION. REFERENCE Circumferential Class 1 MC-ISIN3-2553-01.00 DOCUMENT SRG-78-001 REV.2 (DISTRIBUTION CODE MADM-257). SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS. Pipe to Elbow M2.G3.1.0001 G03.001.004, G03.001.004A 2NC2FW22-7 NC MCFI-2NC22 PDI-UT-2 UT SS 1.000 / 10.000 Component AUGMENTED EXAMINATION. REFERENCE MC-ISIN3-2553-01.00 PDI-UT-2-M DOCUMENT SRG-78-001 REV.2 Circumferential Class 1 (DISTRIBUTION CODE MADM-257). SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS. Pipe to Elbow M2.G6.2.0001 2PZR-Manway NC MCM 1201.01-140 NDE-68 VT-2 Pressurizer Manway Diaphram Seal Weld. Bare Class 1 Metal Visual Exam by VT-2 qualified Inspector. Examine the gap between the Pressurizer Manway Cover and Manway for evidence of diaphram plate seal weld leakage. (For responsible Individual, contact J.M. Shuping, Alloy 600 Engineer Nuclear Technical Services). Reference NRC Bulletin 2004-01. Pressurizer Manway Categorv B-D M2.B3.140.0005 B03.140.005 2SGC-INLET NC MCM 2201.01-0216 NDE-680 UT CS 6.500 / 0.000 50235 STEAM GENERATOR 2C INLET NOZZLE TO Circumferential Class 1 MCM 2201.01-0207 LOWER HEAD. Y1-X2 QUADRANT. (INSIDE RADIUS SECTION). Nozzle To Head M2.B3.140.0006 B03.140.006 2SGC-OUTLET NC MCM 2201.01-0216 NDE-680 UT CS 6.500 / 0.000 50235 STEAM GENERATOR 2C OUTLET NOZZLE Circumferential Class 1 MCM 2201.01-0207 TO LOWER HEAD. Y2-X2 QUADRANT. (INSIDE RADIUS SECTION). Nozzle To Head Printed 06/11/08GJU8302 v.01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 2 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval,ou. 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / Historical Data Category B-G-2 M2.B7.20.0001 B07.020.001 2PZR-MWB NC MCM 2201.01.015 NDE-62 VT-1 CS 7.500 / 1.875 PRESSURIZER MANAWAY BOLTING (16 Class 1 MC-ISIN-2553-02.00 BOLTS). EXAMINE ALL BOLTING MATERIAL. MCM 1201.01-0048 Bolting may be examined in place. M2.B7.50.0001 B07.050.001 2NC53-FL1 NC MCFI-2NC53 NDE-62 VT-i SS 8.000 /1.375 FLANGE BOLTING (12 STUDS). BOLT SIZE Class 1 MC-ISIN3-2553-02.00 DETERMINED USING MP/OIAI7650/01 ENCLOSURE 13.2. EXAMINE ALL fLANGE BOLTING MATERIAL. Bolting may be examined in place. M2.B7.50.0002 B07.050.002 2NC53-FL2 NC MCFI-2NC53 NDE-62 VT-1 SS 8.000 /1.375 FLANGE BOLTING (12 STUDS). BOLTING Class 1 MC-ISIN3-2553-02.00 SIZE DETERMINED USING MP/0/A/7650/01 ENCLOSURE 13.2. EXAMINE ALL FLANGE BOLTING MATERIAL. Bolting may be examined in place. M2.B7.50.0003 B07.050.003 2NC53-FL3 NC MCFI-2NC53 NDE-62 VT-1 SS 8.000 /1.375 FLANGE BOLTING (12 STUDS). BOLTING Class. 1 MC-ISIN3-2553-02.00 SIZE DETERMINED USING MP/O/A17650/01 ENCLOSURE 13.2. EXAMINE ALL FLANGE BOLTING MATERIAL. Bolting may be examined in place. Category B-K M2.1B10.10.0002 B1 0.010.002 2PZR-W13A NC MCM 2201.01-16 NDE-25 MT CS 4.000 /4.000 WELDED ATTACHMENT. PRESSURIZER Class 1 MC-ISIN3-2553-02.00 SEISMIC LUG TO SHELL. Y-Z QUADRANT. PT MCM 1201.01-0048 MAY BE USED IN PLACE OF MT IF NECESSARY SEISMIC LUG to SHELL M2.B10.10.0003 B10.010.003 2PZR-W13B NC MCM 2201.01-16 NDE-25 MT CS 4.000 /4.000 WELDED ATTACHMENT. PRESSURIZER Class 1 MC-ISIN3-2553-02.00 SEISMIC LUG TO SHELL. X-Y QUADRANT. MCM 1201.01-0048 PT may be used in place of MT if necessary. SEISMIC LUG to SHELL Printed 06/11/08 GJU8302 v. 01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 3 of 19

This report includes all changes throuah addendum 2MNS-037 McGuire Z 3rd Interval, oui 3 (EOC-18) Summary Num Insp Component ID / Type System "ISO/DWG Numbers . Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / Historical Data CaMegor5 E-M-2 M2.1312.50.0 024 B12.050.006E, B12.050.007E 2N1-175 NI MCFI-2NI114 NDE-64 VT-3 SS 0.000 / 6.000 GROUP 7.6" CRANE-ALOYCO CHECK Class 1 MC-ISIN3-2562-03.01 VALVE. INSPECT ONE OF THE FOLLOWING MCM 1205.00-0005 VALVES-IN GROUP 7: 2N1-126, 2N1-134, 2NI-852, 2NI-853, 2N1-175, 2N1-176, AND 2NI-181 ONLY IF DISASSEMBLED FOR MAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION. Group 7 has been completed for the Third Interval M2.1312.50.0026 B12.050.007A, B12.050.007G 2N1-180 NI MCFI-2NI15 NDE-64 VT-3 SS 0.000 / 6.000 GROUP 8.6" WESTINGHOUSE SWING Class 1 MC-ISIN3-2562-03.01 CHECK VALVE. INSPECT THE FOLLOWING MCM 1205.36-0028 VALVE IN GROUP 8: 2N1-180 ONLY IF DISASSEMBLED FORMAINTENANCE, REPAIR, OR VOLUMETRIC EXAMINATION. Group 8 has been completed for the Third Interval Categorv B-N-1 M2.113.10.0001 613.010.001 2RPV-INTERIOR NC MCM 2201.01-0001 NDE-63 VT-3 SS 0.000 / 0.000 REACTOR VESSEL INTERIOR. AREAS TO Class 1 MC-ISIN3-2553-01.00 BE EXAMINED SHALL INCLUDE THE SPACES ABOVE AND BELOW THE REACTOR CORE THAT ARE MADE ACCESSIBLE FOR EXAMINATION BY REMOVAL OF COMPONENTS DURING NORMAL REFUELING OUTAGES. INSPECT EACHINSPECTION PERIOD. THIS EXAMINATION WAS PERFORMED FOR THE SECOND INTERVAL PER RFR03-004. EXAMINATION ALSO PERFORMED FOR 2EOC-16/OUTAGE 1, WILL REPORT BUT WILL NOT COUNT FOR PERCENTAGE PURPOSE. EXAMINATION WILL BE PERFORMED 2EOC-1 7/OUTAGE 2 AND WILL REPORT FOR PERCENTAGES AT THAT TIME. Category C-1B M2.C2.1 1.0005 C02.011.001 2RCHPSS-INLET NV MCM 1201.04-272 NDE-35 PT SS 0.375 / 4.000 RECIPROCATING CHARGING PUMP Circumferential Class 2 MC-ISIN3-2554-03.00 SUCTION STABLIZER. Inlet Nozzle to SHELL McGuire 26/11/20087:28:10 AM Page 4 of 19 06/11/08 GJU8302 Printed 06/11/08GJU8302 v.01/19/08 v.01/19/08 SDQA Cat SDQA Cat "C" "C" McGuire 2 6/11/2008 7:28:10 AM Page 4 of 19

This report inctudes alt changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou. 3 (EOC-18) Summary Num Insp Component/D/ Type System ISO/DWG Numbers Procedure Req Mat  % Sched Thick/Dia Cal Blocks Comments / HistoricalData Category C-B M2.C2.11.0006 C02.011.002 2RCHPSS-OUTLET NV MCM 1201.04-272 NDE-35 PT SS 0.375 / 4.000 RECIPROCATING CHARGING PUMP Circumferential Class 2 MC-ISIN3-2554-03.00 SUCTION STABLIZER. Outlet Nozzle to SHELL Category C-C M2.C3.10.0008 C03.010.003 2NSHX-SUPPORT-2B NS MCM 1201.06-0090 NDE-35 PT SS 0.750 / 0.000 Containment Spray Heat Exchanger 2B Support Class 2 MC-ISIN3-2563-01.00 Welded Attachment. With Heat Exchangers 2A MCM 1201.06-093 and 2B being manfactured by two different vendors using two different designs, we will examine both to meet Class 2 requirements. This surface exam will include the base metal and weld surfaces of the seismic lugs, stiffening ring (around the entire periphery of the heat exchanger), and heat exchanger exterior surface, including welds within the lug and stiffening ring, that lie within the surface examination boundaries shown in Figure IWC-2500-5. Reference PIPS M-07-00323, M 1192 and Work Request #947475. M2.C3.10.0009 C03.010.004 2SWIF-SUPPORT-26 NV MGM 1201.04-27 NDE-35 PT SS 0.375/ 0.000 SEAL WATER INJECTION FILTER 2B Class 2 MC-ISIN3-2554-03.00 SUPPORT. WELDED ATTACHMENT. MC-1223-1 M2.C3.20.0026 C03.020.051 2MCA-NV-5647 NV MCSRD-2ND-350/sht. 7 NDE-35 PT SS 0.125 / 8.000 WELDED ATTACHMENT. INSPECT WITH Mech Snubber Class 2 MC-ISIN3-2554-03.01 M2.F1.20.0119. 2MCA-NV-5647 Mech Snubber Category C-G M2.C6.20.0029 C06.020.001A 2CF0026AB-1 CF MCM 1205.23-0004 NDE-35 PT CS 0.000 / 16.000 ITEM # FWI-003. INSPECT ONE VALVE IN Circumferential Class 2. MC-ISIN3-2591-01.01 THIS GROUP (1A-1D) PER INTERVAL. PT may be used in place of MT if necessary. Valve Body To Valve Body M2.C6.20.0047 C06.020.004A 2ND0070-1 ND MCM 2205.00-0005 NDE-35 'PT SS 0.477 / 8.000 ITEM # 9D-216. INSPECT ONE VALVE IN THIS Circumferential Class 2 MC-ISIN3-2561-01.00 GROUP (4A-4D) PER INTERVAL. Valve Body To Valve Body Printed 06/11/08 GJU8302 v.01/19/08 SDQA Cat "C" McGuire 2 611/2008 7:28:10 AM Page 5 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num_ Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched ThickWDia Cal Blocks Comments / Historical Data Cateoori D-A M2.D1.10.0022 2NDHX-SUPPORT-2A ND MCM 1201.06-22 NDE-65 VT-1 NA 0.750 / 0.000 2A RESIDUAL HEAT REMOVAL HEAT Class 3 MC-ISIN3-2561-01.00 EXCHANGER SUPPORT WELDED MCM 1201.06-48, MC ATTACHMENT. EXAMINE SEISMIC LUG AT 1220-32 TOP OF ND HEAT EXCHANGER 2A. EXAMINE WITH M2.F1.40.0074. REFERENCE PIP M-07-323. M2.D1 .10.0023 2NSHX-SUPPORT-2B NS MCM 1201.06-0090 NDE-65 VT-1 NA 0.750 / 0.000 2B CONTAINMENT SPRAY HEAT Class 3 MC-ISIN3-2563-01.00 EXCHANGER SUPPORT WELDED MC 1220-32, MC 1220- ATTACHMENT. EXAMINE WITH 103 M2.F1.40.0080. SINCE "HX A" & "HX B" ARE OF DIFFERENT DESIGN, BOTH WILL BE EXAMINED. REFERENCE PIP M-07-323. Examine Welded Attachments, Support Lugs located on Class C side below the bottom Tube Sheet. The Seismic Lugs were visually examined EOC-18/Outage 3 under this Summary Number but have been re-categorized to Summary Number M2.C3.10.0008. M2.D1.10.0024 2NSHX-SUPPORT-2A NS MCM 1201.06-0025, MC NDE-65 VT-1 NA 0.750 / 0.000 2A CONTAINMENT SPRAY HEAT Class 3 IWSA3-2563-01.00 EXCHANGER SUPPORT WELDED ATTACHMENT. EXAMINE SEISMIC TIE MCM 1201.06-093, MC DOWN LUGS AT TOP OF NS HEAT 1220-103 EXCHANGER 2A. EXAMINE WITH M2.F1.40.0092. SINCE "HX A" & "HX B" ARE OF DIFFERENT DESIGN, BOTH WILL BE EXAMINED. REFERENCE PIP M-07-323. M2.D1.10.0026 2NSHX-SUPPORT-2A NS MCM 1201.06-0025, MC NDE-65 VT-i1 NA 0.750 / 0.000 2A CONTAINMENT SPRAY HEAT Class 3 094S§13-2563-01.00 EXCHANGER SUPPORT WELDED ATTACHMENT. EXAMINE SUPPORT LUGS MCM 1201.06-093, MC AND RING. EXAMINE WITH M2.F1.40.0092. 1220-103 SINCE "HX A" & "HX B" ARE OF DIFFERENT DESIGN, BOTH WILL BE EXAMINED. Category F-A M2.F1.10.0004 F01.010.004C 2MCR-NC-4293 NC MCSRD-2NC-203/sht. 1 NDE-66 VT-3 NA 0.000 /6.000 Mech Snubber Class 1 Mech Snubber Printed 06/11/08 GJU8302 v.01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM . Page 6 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia ('al Blocks Comments / HistoricalData Category F-A M2.F1.10.0005 F01.010.005C 2MCR-NC-4289 NC MCSRD-2NC-203/sht. 1 NDE-66 VT-3 NA 0.000 / 4.000 Spring Hgr Class 1 Spring Hgr M2.F1.10.0040 F01.010.101C 2MCR-NV-4779 NV MCSRD-2NV-204/sht. 1 NDE-66 VT-3 NA 0.006 / 2.000 Spring Hgr Class 1 Spring Hgr M2.F1.10.0049 F01.010.110B 2MCR-NV-4380 NV MCSRD-2NV-209/sht. 1 NDE-66 VT-3 NA 0.000 /2.000 Rigid Restraint Class 1 Rigid Restraint M2.F1.10.0142 F01.010.092A, F01.010.6164 2MCR-NI-4730 NI MCSRD-2NI-209/sht. 2 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 1 Rigid Support M21F1.10.0161 F01.010.111A, F01.010.6202 2MCR-NV-4103 NV MCSRD-2NV-206/sht. 1 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 1 Rigid Support M2.Fl.10.0178 F01.010.114C, F01.010.6233 2MCR-NV-4406 NV MCSRD-2NV-204/sht. 1 NDE-66 VT-3 NA 0.000 /4.000 Mech Snubber Class 1 Mech Snubber M2.F1.20.0061 F01.020.154C 2MCR-NI-4026 NI MCSRD-2NI-201/sht. 1 NDE-66 VT-3 NA 0.000 / 6.000 Hyd Snubber Class 2 Hyd Snubber M2.F1 .20.0062 F01.020.155C 2MCR-NI-4017 NI MCSRD-2NI-201/sht. 2 NDE-66 VT-3 NA 0.000 / 6.000 Mech Snubber Class 2 Mech Snubber Printed 06/11/08 GJU8302 v,,01/19/08 SDQA Cat "C" McGuire 2 6111/2008 7:28:10 AM Page 7 of 19

This report includes all changes thro,,qh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments /Historical Data Cateao F-A M2.F1.20.0086 F01.020.201A 2MCR-NS-4516. NS MCSRD-2NS-201/sht. 1 NDE-66 VT-3 NA 0.000 / 8.000 Rigid Support Class 2 Rigid Support M2.F1.20.0091 F01.020.2068 2MCR-NS-4616 NS MCSRD-2NS-203/sht. 1 NDE-66 VT-3 NA 0.000 /8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0092 F01.020.207B 2MCR-NS-4614 NS MCSRD-2NS-203/sht. 1 NDE-66 VT-3 NA 0.000 / 8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.29.0095 F01.020.210A, F01.020.210B 2MCR-NS-4665 NS MCSRD-2NS-204/sht. 1 NDE-66 VT-3 NA 0.000 /8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0096 F01.020.211B 2MCR-NS-4701 - NS MCSRD-2NS-205/sht. 1 NDE-66 VT-3 NA 0.000/ 8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0097 F01.020.2128 2MCR-NS-4710 NS MCSRD-2NS-205/sht. 1 NDE-66 VT-3 NA 0.000/8.000 Rigid-Restraint Class 2 Rigid Restraint M2.F1.20.0098 -FO1.020.2138 2MCR-NS-4715 NS MCSRD-2NS-205/sht. 1 NDE-66 VT-3 NA 0.000/8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0099 F01.020.214B 2MCR-NS-4759 NS MCSRD-2NS-206/sht. 1 NDE-66 VT-3 NA 0.000 18.000 Rigid Restraint Class 2 Rigid Restraint "C" McGuire 26/11/20087:28:10 AM Page 8 of 19 Printed 06/11/08 GJU8302 Printed 06/11/08GJU8302 v.01/19/08 v.01/19/08 SDQA Cat SDQA Cat "C" McGuire 2 611112008 7:28i 10 AM Page 8 of 19

This report includes all changes throuah addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num lnsp Component ID/ Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments HistoricalData Categor F-A M2.F1.20.0100 F01.020.215A 2MCR-NS-4757 NS MCSRD-2NS-206/sht. 1 NDE-66 VT-3 NA 0.000 / 8.000 Rigid Support Class 2 __________Rigid Support M2.F1.20.0101 F01.020.216B 2MCR-NS-4765 NS MCSRD-2NS-206/sht. 1 NDE-66 VT-3 NA 0.000/ 8.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0102 F01.020.2171 2MCA-NS-5008 NS MCSRD-2NS-350/sht. 1 NDE-66 VT-3 NA 0.000/10.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0103 F01.020.21 8A 2MCA-NS-5102 NS MCSRD-2NS-351/sht. 1 NDE-66 VT-3 NA 0.000/ 10.000 Rigid Support Class 2 Rigid Support M2.F1.20.0104 F01.020.219B 2MCA-NS-5107 NS MCSRD-2NS-351/sht. 1 NDE-66 V--3 NA 0.000/10.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0105 F01.020.220A 2MCA-NS-5116 NS MCSRD-2NS-351/sht. 1 NDE-66 V--3 NA 0.000 /10.000 Rigid Support Class 2 Rigid Support M2.F1.20.0106 F01.020.221A 2MCA-NS-5202 NS MCSRD-2NS-352/sht. 1 NDE-66 VT-3 NA 0.000 / 10.000 Rigid Support Class 2 Rigid Support M2.F1.20.0107 F01.020.222C 2MCA-NS-5260 NS MCSRD-2NS-352/sht. 1 NDE&66 VT-3 NA 0.000 /10.000 Spring Hgr Class 2 Spring Hgr M2.F1.20.0117 F01.020.257A 2-MCA-S-NV-521 A NV 2-MCA-S-NV-521-1 NDE-66 VT-3 NA 0.000 /4.000 Rigid Support Class 2 Rigid Support Printed 06/11/08 GJU8302 v. 01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 9 of 19

This report includes all changes throuqh addendum 2MNS-037 

                                                                   *McGuire 2, 3rd Interval, ou      3 (EOC-18)

Summary Num Insp Component ID/ Type System ISO/DWG Numbers Procedure Req Mat Sched ThickWDia Cal Blocks Comments I.Historical Data Cateczor F-A M2.F1.20.0119 F01.020.259C 2MCA-NV-5647. NV MCSRD-2ND-350/sht. 7 NDE-66 VT-3 NA 0.125 / 8.000 INSPECT WITH M2.C3.20.0026. Mech Snubber Class 2 Mech Snubber M2.F1.20.0120 F01.020.2601 2MCA-NV-7046 NV MCSRD-2ND-350/sht. 7 NDE-66 VT-3 NA 0.000 / 8.000 Rigid Restraint Class 2 Rigid Restraint M2.F17.20.0128 F01.020.268A 2MCR-NV-4101 NV MflCSRD-2NV-206/sht. 1 NDE-66 VT-3 NA 0.600/ 2.000 Rigid Support Class 2 M, VlC-ISIN3-2554-01 .00 2 MCR-NV-4101 Rigid Support M2.F1.20.0129 F01.020.269B 2MCR-NV-4576 NV MCSRD-2NV-224/sht. 1 NDE-66 VT-3 NA 0.000 /2.000 Rigid Restraint Class 2 Rigid Restraint M2.F1.20.0159 F01.020.350A, F01.020.351A 2MCR-RN-4537 RN MCSRD-2RN-203/sht. 1 NDE-66 VT-3 NA 0.000 /6.000 Rigid Support Class 2 Rigid Support M2.F1 .20.0160 F101.020.375A, F101.020.375B 2MCA-RV-5017 RV MCSRD-2RV-350/sht. 1 NDE-66 VT-3 NA 0.000/ 12.000 Rigid Support Class 2 Rigid Support M2.F1 .20.0171 F01.020.427C, F01.020.436C 2MCA-SM-H141 SM MCSRD-2SMA/sht. 3 NDE-66 VT-3 NA 0.000 / 36.000 Hyd Snubber Class 2 Hyd Snubber M2.F1 .20.0341 F01.020.129A, F01.020.6585 2MCA-ND-5910 ND MCSRD-2ND-350/sht. 2 NDE-66 VT-3 NA 0.125 / 12.000 Rigid Support Class 2 Rigid Support Printed 06/11/08GJU8302 v.01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28: 10 AM Page 10 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC.18) Summary Num Insp Component ID / Type System. ISO/DWG Numbers Procedure Req Mat Sched ThickWDia Cal Blocks Comments/ HistoricalData Categor F-A M2.F1.20.0505 F0l .020.267A, FOI .020.6881 2MCA-NV-5002 NV MCSRD-2NV-350/sht. 2 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 2 Rigid Support M2.11,20.0584 F01.020.266C, F01.020.7035 2MCA-NV-5302 NV MCSRD-2NV-353/sht. 2 NDE-66 VT-3 NA 0.000/4.000 Mech Snubber Class 2 Mech Snubber M2.F1.20.0705 F01.020.426A, F01.020.7223 2MCA-SM-H140 SM MCSRD-2SMA/sht. 3 NDE-66 VT-3 NA 0.000 136.000 Rigid Support Class 2 Rigid Support _________ M2.Fl.20.0760 F01.020.478C, F01.020.7317 2MCA-SV-H6 SV MCSRD-2SVA/sht: 1 NDE-66 VT-3 NA 0.000 / 6.000 Mec Snb/Spr Hgr Class 2 Mec Snb/Spr Hgr M2.F1.20.0781 F01.020.020C, F01.020.7358 2MCR-CA-H168 CA MCSRD-2CAO/sht. 1 NDE-66 VT-3 NA 0.000/6.000 Mec Snb/Spr Hgr Class 2 Mec Snb/Spr Hgr M2.F1.20.0818 F01.020.186A, F01.020.7433 2MCR-NI-4034 NI MCSRD-2NI-203/sht. 1 NDE-66 VT-3 NA 0.000 / 6.000 Rigid Support Class 2 Rigid Support M2.F1.20.0862 F01 .020.185A, F01.020.7518 2MCR-NI-4561 NI MCSRD-2NI-203/sht. 1 NDE-66 VT-3 NA 0.125/6.000 Rigid Support Class 2 Rigid Support Printed 06/11/08 GJU8302 v. 01/19/08 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 11 of 19

This report includes all changes throuch addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISOIDWG Number s Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / Historical Data Catecjor F-A M2.FI .20.1001 FOl .020.256A, F01 .020.7805 2MCR-NV-4171 NV MCSRD-2NV-223/sht. 1 NDE-66 VT-3 NA 0.000 /S2.000 Rigid Support Class 2 Rigid Support M2.F1.20.1002 F01.020.258A, F01.020.7806 2MCR-NV-4172 NV MCSRD-2NV-223/sht. 1 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 2 Rigid Support M2.F1.20.1011 F01.020.261A, F01.020.7823 2MCR-NV-4181 NV MCSRD-2NV-223/sht. 2 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 2 Rigid Support M2.F1.20.1013 F01.020.262A, F01.020.7826 2MCR-NV-4191 NV MCSRD-2NV-224/sht. 1 NDE-66 VT-3 NA 0.000 / 2.000 Rigid Support Class 2 Rigid Support_____ M2.F1.20.1180 F01.020.012A 2MCA-CA-H11 CA MCSRD-2CAM/sht. 2 NDE-66 VT-3 NA 0.125 / 4.000 Rigid Support Class 2 Rigid Support M2.F1.30.0031 F01.030.062C 2MCA-KC-3332 KC MCSRD-2KC-351/sht. 5 NDE-66 VT-3 NA 0.281 / 16.000 Mech Snubber CI ass 3 Mech Snubber M2.F1.30.0032 FO1.030.063C 2MCA-KC-3078 KC MCSRD-2KC-351/sht. 6 NDE-66 VT-3 NA 0.000 / 16.000 Mec Snb/Spr Hgr Class 3 Mec Snb/Spr Hgr M2.F1.30.0033 F01 .030.064C 2MCA-KC-3030 KC MCSRD-2KC-351/sht. 7 NDE-66 VT-3 NA 0.000 / 20.000 Hyd Snubber Class 3 Hyd Snubber Printed 06/11(08 GJU8302 01/19/08

v. 01/19/08 GJU8302 v. SDQA Cat "C" MoGuire 26/11/2008 7:28:10AM Page 12 of 19 Printed 06111108 SDQA Cat "C" McGuire 2 6/11 /2008 7:28: 10 AM Page 12 of ig

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EQC-18) Summary Num Insp Component ID / Type System ISOIDWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / HistoricalData Categqory F-A M2.F1.30.0034 F01 .030.065A 2MCA-KC-3325 KC MCSRD-2KC-351/sht. 7 NDE-66 VT-3 NA 0.000 / 20.000 Rigid Support Class 3 Rigid Support M2.F1.30.0035 F01.030.066A 2MCA-KC-3150 KC MCSRD-2KC-358/sht. 1 NDE-66 VT-3 NA 0.365 / 16.000 Rigid Support Class 3 Rigid Support M2.F1.30.0036 F01.030.067A 2MCA-KC-3144 KC MCSRD-2KC-358/sht. 2 NDE-66 VT-3 NA 0.000 1 8.000 Rigid Support Class 3 Rigid Support M2.F1.30.0037 F01 .030.068A 2MCA-KC-3274 KC MCSRD-2KC-358/sht. 3 NDE-66 VT-3 NA 0.000 / 8.000 Rigid Support Class 3 Rigid Support M2.F1.30.0248 F01.030.072A, F01.030.8267 2MCA-KC-3011 KC MCSRD-2KC-351/sht. 3 NDE-66 VT-3 NA 0.000 /14.000 Rigid Support Class 3 Rigid Support M2.F1.30.0254 F01.030.075C, F01.030.8277 2MCA-KC-3020 KC MCSRD-2KC-351/sht. 4 NDE-66 VT-3 NA 0.000/16.000 Mech Snubber Class 3 Mech Snubber M2.F1.40.0005 F01.040.005, F01.040.005B 2RCP-B-SUPPORT NC MC 1070-7, MC 1070-2 NDE-66 VT-3 NA 0.000 / 0.000 REACTOR COOLANT PUMP 2B SUPPORT. Rigid Restraint Class 1 MC-ISIN3-2553-01.00 EXAMINE SUPPORT COLUMNS AND LATERAL RESTRAINT. REFERENCE PIP M-MC-1 070-08-2, MC-1 070-07-323. 17, MCM 2201.01-0084 Rigid Restraint McGuire 26/11/2008 7:28:10AM Page 13 of 19 06/11/08 GJU8302 Printed 06/11/08GJU8302 Printed v. 01/19/08 v.01/19/08 SDQA Cat SDQA Cat "C" "C" McGuire 2 6/11/2008 7:28: 10 AM Page 13 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISOIDWG Numbers Procedure Req Mat Sched ThickWDia Cal Blocks Comments / HistoricalData Category F*-A M2.F1.40.00O73 F0I.040.006B 2NDP-SUPPORT-2A ND MCM 1201.05-014, MC NDE-66 VT-3 NA 0.000 / 0.000 RESIDUAL HEAT REMOVAL 2A PUMP Rigid Restraint Class 2 KM(R3-2561-01.00 SUPPORT. EXAMINE HORIZONTAL RESTRAINT AND VERTICAL SUPPORT. MCM 1201.05-0048 REFERENCE PI M-07-323. _____Rigid Restraint M2.F1.40.0074 F0l .040.0078 2NDHX-SUPPORT-2A ND MCM 1201.06-22 NDE-66 VT-3 NA 0.750 / 0.000 2A RESIDUAL HEAT REMOVAL HEAT Rigid Restraint Class 2 MC-ISIN3-2561-01.00 EXCHANGER SUPPORT. EXAMINE LOWER MCM 1201.06-48, MC SUPPORT AND UPPER RESTRAINT. 1220-32 EXAMINE WITH M2.D1.10.0022. REFERENCE PIP M-07-323. Rigid Restraint M25F1.40.0075 F0l .040.0088 2NSP-SUPPORT-2A NS MC 1680-00, MCM NDE-66 VT-3 NA 0.000/ 0.000 CONTAINMENT SPRAY PUMP 2A SUPPORT. Rigid Restraint Class 2 W-18104A3-01.00 EXAMINE HORIZONTAL RESTRAINT AND VERTICAL SUPPORT. EOC--18 / OUTAGE 3 MC 1220-74, MC 1690- REINSPECTION OF SUPPORT TO INCLUDE 014.01 LATERAL RESTRAINT. REFERENCE PIP M-07-323. Rigid Restraint M2.F1.40.0080 F01.040.039B 2NSHX-SUPPORT-2B NS MCM 1201.06-0090 NDE-66 VT-3 NA 0.750 / 0.000 2B CONTAINMENT SPRAY HEAT Rigid Restraint Class 2 MC-ISIN3-2563-01.00 EXCHANGER SUPPORT. EXAMINE LOWER MC 1220-32, MC 1220- SUPPORT AND UPPER LATERAL 103 RESTRAINTS. EXAMINE WITH M2.D1.10.0023. SINCE "HX A" & "HX B" ARE OF DIFFERENT DESIGN, BOTH WILL BE EXAMINED., EOC--18 / OUTAGE 3 REINSPECTION OF SUPPORT TO INCLUDE UPPER LATERAL RESTRAINTS. REFERENCE PIP M-07-323. M2.F1.40.0092 F01.040.009B 2NSHX-SUPPORT-2A NS MC-M 1201.06-0025, MC NDE-66 VT-3 NA 0.750 / 0.000 2A CONTAINMENT SPRAY HEAT Rigid Restraint Class 2 R* `ASiJ3-2563-01.00 EXCHANGER SUPPORT. EXAMINE LOWER SUPPORT AND UPPER LATERAL MCM 1201.06-093, MC RESTRAINTS. EXAMINE WITH 1220-103 M2.D1.10.0024. SINCE "HX A" & "HX B" ARE OF DIFFERENT DESIGN, BOTH WILL BE EXAMINED. EOC-18/ OUTAGE 3 REINSPECTION OF SUPPORT TO INCLUDE UPPER LATERAL RESTRAINTS. REFERENCE PIP M-07-323. MoGuire 26(11(2008 7:28:10 AM Page 14 of 19 Printed 06111108 Printed v.01/19/08 GJU8302 v. 06/11/08 GJU8302 01119108 Cat "C" SDQA Cat SDQA "C" McGuire 2 611112008 7ý28:10 AM Page 14 of 19

This report includes all changes throuqh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / HistoricalData Categor F-A M2.F1.40.0104 F01.040.017B 2SWIF-SUPPORT-2B NV MCM 1201.04-27 NDE-66 VT-3 NA 0.375 / 0.000 SEAL WATER INJECTION FILTER 2B Rigid Restraint Class 2 MC-ISIN3-2554-03.00 SUPPORT. MC-1223 ______ _____Rigid Restraint M2.F1.40.0105 F01.040.018B 2NIP-SUPPORT-2B NI MCM 1201.05-454 NDE-66 VT-3 NA 0.000 / 0.000 SAFETY INJECTION PUMP 2B SUPPORT Rigid Restraint Class 2 MC-ISIN3-2562-03.00 LEGS (4). REFERENCE MANUAL MCM 1201.05-280.v.! _________Rigid Restraint M2.F1.40.0106 F01.040.019B 2KFHX-SUPPORT-2A KF MCM 1201.06-0027 NDE-66 VT-3 NA 0.250 / 0.000 FUEL POOL COOLING HX 2A SUPPORT. Rigid Restraint Class 3 MC-ISIN3-2570-01.01 MC-1220-32 Rigid Restraint M2.F1.40.0132 2CRDM-SUPPORT NC MCM 1201.13-23 NDE-66 VT-3 NA 0.000 / 0.000 REACTOR VESSEL CRDM SEISMIC Class 1 MCM 1201.13-24 SUPPORT. EXAMINE TURN BUCKLE, MCM 1201.13-25 ALTHOUGH NOT REQUIRED BY CODE (PER MARK PYNE AND KEVIN RHYNE) THE FRAME WILL BE VISUALLY EXAMINED AS A SUPPLEMENT TO THE TURN BUCKLE EXAM Categorv - M2.Q1 .1.0001 2NC2FW2-NW6 NC PDI-UT-8 UT 1.406 / 14.000 DE-13-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC2 DE-1 3-CIRC- 2 and inspected under Section XI Appendix Q 01 as required by Reg. Guide 1.147. Alloy Class I 600/82/182 weld with weld overlay Alloy 690/52/152. This weld overlay (2NC2FW2-NW6) covers welds 2PZR-W1SE and 2NC2FW2-3. 14 Inch Pressurizer Surge Nozzle Examine EOC-18 311/2008, then 25% of the overlay population isrequired to be examined every ten years. Weld (2PZR-W1SE) was previously scheduled for EOC-18 but not examined. (M2. R1. 11.0035). Weld overlay 01/19/08

v. 01/19/08 SDQA Cat "C" McGuire 26/11/2008 7:28:10AM Page 15 of 19 Printed 06/11/08 GJU8302 v.

06/11/08 GJU8302 SDQA Cat "C" - McGuire 2 6/11/2008 7:28:10 AM Page 15 of 19

This report includes all changes throtuh addendum 2MNS-037 McGuire 2, 3rd intervaf, ou, 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched ThickWDia Cal Blocks Comments / HistoricalData Cateor Q-A M2.Q1.1.0002 2NC2FW61 -NW4 NC PDI-UT-8 UT 0.719 / 6.000 DE-8-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC61 DE-8-CIRC-01 2 and inspected under Section Xl Appendix Q Class 1 as required by Reg. Guide 1.147. Alloy 600/82/182 weld with weld overlay Alloy 690/52/152. This weld overlay (2NC2FW6 1-NW4) covers welds 2PZR-W3SE and 2NC2FW61-1. 6 Inch Pressurizer Relief Nozzle. Examine EOC-18 3/1/2008, then 25%,of the overlay population is required to be examined every ten years. ____ Weld overlay M2.Q1.1.0003 2NC2FW53-NW1 NC PDI-UT-8 UT 0.719) 6.000 DE-8-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC53 DE-8-CIRC-01 2 and inspected under Section Xl Appendix Q Class 1 as required by Reg. Guide 1.147. Alloy 600/82/182 weld with weld overlay Alloy 690/52/152. This weld overlay (2NC2FW53-NW1) covers welds 2PZR-W4ASE and 2NC2FW53-12. 6 Inch Pressurizer Safety Nozzle. Examine EOC-18 3/1/2008, then 25% of the overlay population is required to be examined every ten years. Weld overlay M2.QI .1.0004 2NC2FW53-NW2 NC PDI-UT-8 UT 0.719 / 6.000 DE-8-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC53 DE-8-CIRC-01 2 and inspected under Section Xl Appendix Q Class 1 as required by Reg. Guide 1.147. Alloy 600/82/182 weld with weld overlay Alloy 690/52/152. This weld overlay (2NC2FW53-- NW2) covers welds 2PZR-W4BSE and 2NC2FW53-26. 6 Inch Pressurizer Safety Nozzle. Examine EOC-18 3/1/2008, then 25% of the overlay population is required to be examined every ten years. Weld overlay SDQA Cat "C" McGuire 26/11/20087:28:10 AM Page 16 of 19 Printed GJU8302 v. 06/11/08 GJU8302 Printed 06/11/08 v. 01/19/08 01/19/08 SDQA Cat "C" McGuire 2 6/1112008 7:28: 10 AM Page 16 of 19

This report includes all changes throuclh addendum 2MNS-037 McGuire 2, 3rd Interval, ou 3 (EOC-18) Summary Num Insp Component ID / Type System ISOIDWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / HistoricalData Categor -A M2.Q1 .1.0O5 2NC2FW53-NW3 NC PDI-UT-8 UT 0.719 / 6.000 DE-8-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC53 DE-8-CIRC-01 2 and inspected under Section Xi Appendix Q Class 1 as required by Reg. Guide 1.147. Alloy 600/82/182 weld with weld overlay Alloy 690/52/152. This weld overlay (2NC2FW53-NW3) covers welds 2PZR-W4CSE and 2NC2FW53-13. 6 Inch Pressurizer Safety Nozzle. Examine EOC-18 3/1/2008, then 25% of the overlay population is required to be examined every ten years. Weld overlay M2.Q1.1.0006 2NC2FW13-NW5 NC PDI-UT-8 UT 0.531 / 4.000 DE-6-AX-01 Weld overlay installed under Code Case N-504-MCFI-2NC13 DE-6-CIRC-01 2 and inspected under Section Xl Appendix Q DE-8-CIRC-01 as required by Reg. Guide 1.147. Alloy 600/82/182 weld with weld overlay Alloy Class 1 690/52/152. This weld overlay (2NC2FW13-NW5) covers welds 2PZR-W2SE and 2NC2FW13-1. 4 Inch Pressurizer Spray Nozzle. Examine EOC-18 3/1/2008, then 25% of the overlay population is required to be examined every ten years. Weld (2PZR-W2SE) was previously scheduled and examined in EOC-17 (RO1.011.022) Weld overlay Categor R-A M2.R1.11.0143 Risk Segment NV-002AB R01.011.1007 2NV2F-84 NV MCFI-2NV1 NDE-12 RT SS 0.134 / 6.000 This weld was changed from 2NVP31-2 so RT Circumferential Class 2 MC-ISIN-2554-03.01 could be performed on a weld in this segment. Elbow to Pipe M2.R1.11.0189 Risk Segment NV-002AA R01.011.1014 2NV2FW1 15-5 NV MCFI-2NV1 15 NDE-12 RT SS 0.148 / 8.000 Circumferential Class 2 MC-ISIN-2554-03.01 Pipe to Elbow SDQA Cat "C" McGuire 26/11/20087:28:10 AM Page 17 of 19 Printed 06/11/08 01/19/08 GJU8302 v.v. 01/19/08 06/11/08 GJU8302 SDQA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 17 of 19

This report includes all changes throucih addendum 2MNS-037 McGuire 2, 3rd Interval, oA, 3 (EOC-18) Summary Num Insp Component ID / Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia Cal Blocks Comments / HistoricalData Categor_ R-A M2.R1.1 1.0275 Risk Segment NV-083 R01.011.152 2NV2FW215-48 NV MCFI-2NV215 NDE-600 UT SS 0.344 / 2.000 SEE SECTION 8 FOR CALIBRATION BLOCK MC-ISIN-2554-01.02 Component REQUIREMENTS. Circumferential Class 2 Pipe To Pipe M2.R1. 11.0278 Risk Segment NV-1 08A R01.01 1.155 2RCHPSS-OUT-1 NV MCFI-2NV32 PDI-UT-2 UT SS 0.237 / 4.000 PDI-UT-2-M Circumferential Class 2 MC-ISIN-2554-03.00 RECIPROCATING CHARGING PUMP MCM1201.04-0272 SUCTION STABILIZER. Equipment # 2NVAC0052. EOC-18 examination performed as additional sample for indication found on Summary Number M2.R1.11.0279. Reference PIP M-08-01705. Terminal End Nozzle to Flange M2.R1.1 1.0279 Risk Segment NV-108A R01.011.156 2RCHP-IN NV MCM 2201.05-0031 001 - NDE-12 RT SS 0.237 /4.000 RECIPROCATING CHARGING PUMP INLET. Circumferential Class 2 MC-ISIN3-2554-03.00 SEE SECTION 8 FOR CALIBRATION BLOCK REQUIREMENTS. Pump flange bolting must be removed before examination can be performed. Terminal End Flange to Pump M2.R1.11.0463 Risk Segment NS-020 R01.01 1104 2NS2F427 NS MCFI-2NS17 NDE-12 RT SS 0.148 / 8.000 Circumferential Class 2 MC-ISIN-2563-01.00 Elbow To Pipe M2.R1.11.1534 Risk Segment NV-002AA R01.01 1.127 2NV2FW1 15-4 NV MCFI-2NV1 15 NDE-12 RT SS 0.148 / 8.000 Circumferential Class 2 MC-ISIN-2554-03.01 Elbow to Pipe M2.R1.11.1536 Risk Segment NV-002AB R01.011.129 2NVP8-3 NV MCFI-2NV1 NDE-12 RT SS 0.134 / 6.000 Circumferential Class 2 MC-ISIN-2554-03.01 Pipe to Elbow SDQA Cat "C" McGuire 26/11/2008 7:28:10AM Page 18 of 19 Printed 06/11/08 Printed GJU8302 v.01/19/08 06/11/08 GJU8302 v.01/19/08 SDOA Cat "C" McGuire 2 6/11/2008 7:28:10 AM Page 18 of 19

This report includes all changes throtnh addendum 2MNS-037 McGuire 2, 3rd Interval, ot 3 (EOC-18) Summary Num Insp Component ID/ Type System ISO/DWG Numbers Procedure Req Mat Sched Thick/Dia 'al Blocks Comments / HistoricalData Catego R-A M2.Ri.11.1594 Risk Segment NV-080A R01.011.147 2NV2FW215-37 NV MCFI-2NV215 NDE-600 UT SS 0.438 / 3.000 SEE SECTION 8 FOR CALIBRATION BLOCK MC-ISIN-2554-01.02 Component REQUIREMENTS. Circumferential Class 2 Pipe To Tee M2.R1.11.1598 Risk Segment NV-083 R01.011.151 2NV2FW215-49 NV MCFI-2NV215 NDE-600 UT SS 0.344 / 2.000 SEE SECTION 8 FOR CALIBRATION BLOCK MC-ISIN-2554-01.02 Component REQUIREMENTS. Circumferential Class 2 ____ __________________Pipe To Pipe M2.R1.13.0002 Risk Segment RV-002 R01.013.002 2RV2FW30-27 RV MCFI-2RV30 NDE-946 UT CS 0.375 / 12.000 StepWedge EXAMINE A 1 FT. LENGTH OF PIPE AT WELD Circumferential Class 2 MC-ISIN-2604-03.00 TO DETERMINE WALL THKS. EXAMINE 6 INCHES EACH SIDE OF WELD, MARK IN 1 INCH GRID Pipe To Flange End of Report STATISTICS ONLY Class 1 30 Class 2 64 Class 3 14 Total by Class 108 Systems 108 Total Count 108 

                                                                                                                 'C"                             McGuire 26/11/20087:28:10 AM       Page 19 of 19 Printed 06/11/08 Printed           GJU8302 v.

06/11/08 GJU8302 01/19/08 v.01/19/08 SDQA Cat SDQA Cat "C" McGuire 2 6/11/2008 7:28: 10 AM Page 19 of 19

4.0 Results of Inspections Performed The results of each examination shown in the Inspection Results (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsections 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4. The information shown below is a field description for the reporting format included in this section of the report:

SUMMARY

               =    ASME Section XI Tables IWB-2500-1 NUMBER                      (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2),

Augmented Requirements ID NUMBER - Unique Identification Number SYSTEM = Component System Identification INSP DATE - Date of Examination INSP STATUS CLR Clear REC Recordable REP Reportable INSP LIMITED = Indicates inspection was limited. Coverage obtained is listed. GEO REF SY Yes (Geometric Reflector N No applies only to UT) SY Yes RFR (Relief Request) N No COMMENTS = General and / or Detail Description McGuire Unit 2 Page 1 of 3 Outage 3/EOC-18 Revision 0 Section 4 June 11, 2008

DUKE ENERG V CORPORATION QUALITY ASSURANC TECHNICAL SERVICES Scheduleworks Inservice Inspection DatabaseManagement System Inspection Results McGuire 2, 3rd Interval, Outage 3 (EOC-18) Inspection Results for McGuire Unit 2 EOC-18 Insp Insp Insp Geo Summary No Component ID System Date Status Limited Ref RFR Comment M2.B10.10.0002 2PZR-W13A NC 03/17/08 CLR N N N MT-08-001 M2.B10.10.0003 2PZR-W13B NC 03/17/08 REC N N N MT-08-002 Linear Indication acceptable per ASME Section XI Table IWB-3510-3 M2.B12.50.0024 2N1-175 NI 03/12/08 CLR N N N VT-08-066 M2.B12.50.0026 2N1-180 NI 03/13/08 CLR N N N VT-08-063 M2.B13.10.0001 2RPV-INTERIOR NC 03/23/08 CLR N N N VT-08-071 M2.B3.140.0005 2SGC-INLET NC 03/14/08 CLR N N N UT-08-008 M2.B3.140.0006 2SGC-OUTLET NC 03/14/08 CLR IT N N UT-08-007 M2.B7.20.0001 2PZR-MWB NC 03/13/08 CLR N N N VT-08-065 M2.17.50.0001 2NC53-FL1 NC 03/06/08 CLR N N N VT-08-068 M2.B7.50.0002 2NC53-FL2 NC 03/06/08 CLR N N N VT-08-069 M2.B7.50.0003 2NC53-FL3 NC 03/08/08 CLR N N N VT-08-070 M2.C2.11.0005 2RCHPSS-INLET NV 02/27/08 CLR N N N PT-08-003 McGuire2 6/11/2008 1:11:05 PM Page 1 of 9 Printed Printed 6/11/2008 1:12:06 PM GJU8302 6/11/2008 1:12:06 PMGJU8302 v.v.01/01/08 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PM Page 1of9 SDQA Cat "C"

Inspection Results for McGuire Unit 2 EOC-18 Insp Insp Insp Summary No Component ID System Date Status Limited Ref RFR Comment M2.C2.11.0006 2RCHPSS-()UTLET NV 02/26/08 CLR N N N PT-08-001 M2.C3.10.0008 2NSHX-SUFPPORT-2B NS 03/26/08 CLR N N N PT-08-008 M2.C3.10.0009 2SWIF-SUP *PORT-2B NV 03/21/08 CLR N N N PT-08-006 M2.C3.20.0026 2MCA-NV-5 647 NV 03/25/08 CLR N N N PT-08-007 M2.C6.20.0029 - 2CF0026AB CF 03/18/08 CLR N N N PT-08-005 M2.C6.20.0047 2ND0070-1 ND 02/26/08 CLR N N N PT-08-002 M2.D1.10.0022 2NDHX-SUFPPORT-2A ND 02/25/08 CLR N N N VT-08-022 M2.D1.10.0023 2NSHX-SUFPPORT-2B NS 01/31/08 CLR N N N VT-08-023 The Seismic Lugs were visually examined EOC-1 8/Outage 3 under this Summary Number, this item has been re-categorized to Summary Number M2.C3.10.0008. Reference PIPs M-07-0323, M-08-01192 and Work Request 947475. M2.D1.10.0024 2NSHX-SUF PPORT-2A NS 01/31/08 CLR N N N VT-08-021 M2.D1.10.0026 2NSHX-SUF PPORT-2A NS 03/25/08 CLR N N N VT-08-075 M2.F1.10.0003 2MCR-NC-44292 NC 03/04/08 REC 98.00% N N VT-08-079 This item was rescheduled from Outage 3/EOC-18 to Outage 4/EOC-19, new support must be selected to replace this support due to examination being limited at 98% coverage. Reference PIPs M-08-2342 and M-08-03061. McGuire2 6/11/2008 1:11:05 PM p.~ge 2 of 9 Printed 6/11/2008 1:12:07 PM GJUB302 v. 01/01/08 Printed 6/11/2008 1:12:07 PM v.01/01/08 SDQA GJU8302 Cat 'C" McGuire 2 6/11/2008 1:11:05 PM P. ge 2 of 9 SDQA Cat "C"

Inspection Results for McGuire Unit 2 EOC-18 Insp Insp Insp jo Summary No Component ID System Date Status Limited Ref RFR Comment M2.F1.10.0004 2MCR-NC-4293 NC 04/02/08 CLR N N N VT-08-078 M2.F1.10.0005 2MCR-NC-4289 NC 03/05/08 REC N N N VT-08-035 Hanger acceptable for continued service, no operability concer for this support. Chain hoist removed from support M2.F1.10.0040 2MCR-NV-4779 NV 03/05/08. CLR N N N VT-08-036 M2.F1.10.0049 2MCR-NV-4380 NV 03/05/08 CLR N VT-08-037 M2.F1.10.0142 2MCR-NI-4730 NI 03/05/08 CLR N VT-08-038 M2.F1.10.0161 2MCR-NV-4103 NV 03/05/08 CLR N VT-08-039 M2.Fl.10.0178 2MCR-NV-4406 NV 03/05/08 CLR N VT-08-040 M2.Fl.20.0061 2MCR-NI-4026 NI 03/05/08 CLR N VT-08-042 M2.F1.20.0062 2MCR-NI-4017 NI 03/05/08 CLR N VT-08-043 M2.F1.20.0086 2MCR-NS-4516 NS 03/05/08 CLR N VT-08-051 M2.F1.20.0091 2MCR-NS-4616 NS 03/05/08 CLR N VT-08-052 M2-F1 .20.0092 2MCR-NS-4614 NS 03/05/08 CLR N VT-08-053 M2.F1.20.0095 2MCR-NS-4665 NS 03/05/08 CLR N VT-08-054 M2.F1.20.0096 2MCR-NS-4701 NS 03/03/08 CLR N N VT-08-055 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PM Page3 of 9

Inspection Results for McGuire Unit 2 EOC-18 Insp Insp Insp .do Summary No Component ID System Date Status Limited Ref RFR Comment M2.F1.20.0097 2MCR-NS-471 0 NS 03/03/08 CLR N N VT-08-056 M2.F, .20.00.98 2MCR-NS-4715 NS 03/05/08 CLR N N %VT-08-057 M2.F1.20.0099 2MCR-NS-4759 NS 03/03/08 CLR N N VT-08-058 M2.F1.20.0100 2MCR-NS-4757 NS 03/03/08 CLR N N N VT-08-059 M2.F1.20.0101 2MCR-NS-4765 NS 03/03/08 CLR N N VT-08-060 M2.F1.20.0102 2MCA-NS-5008 NS 02/07/08 CLR N N VT-08-002 M2.F1.20.0103 2MCA-NS-5102 NS 02/07/08 CLR N N VT-08-073 M2.Fl.20.0104 2MCA-NS-5107 NS 02/07/08 CLR N N N VT-08-009 M25F1.20.0105 2MCA-NS-5116 NS 02/06/08 CLR N N VT-08-031 2MCA-NS-5202 NS M2.Fl.20.0106 02/05/08 CLR N N VT-08-032 2MCA-NS-5260 NS 02/05/08 CLR M2.F1.20.0107 N N VT-08-003 M2.Fl.20.0117 2-MCA-S-NV-521-1-A NV 02/05/08 CLR N N N VT-08-020 M2.F1.20.0119 2MCA-NV-5647 NV 02/07/08 CLR N N N VT-08-013 M2.F1.20.0120 2MCA-NV-7046 NV 02/07/08 CLR N N N VT-08-016 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PM Page4 of 9

Inspection Results for McGuire Unit 2 EOC-18 Insp Insp Insp Summary No Component ID System Date Status Limited Ref RFR Comment M2.F1.20.0128 2MCR-NV-4101 NV 03/04/08 CLR N N N VT-08-044 M2.F1-.20.0129 2MCR-NV-4576 NV 03/05/08 CLR N N N VT-08-045 M2.F1.20.0159 2MCR-RN-4537 RN 03/05/08 CLR N N N VT-08-067 M2.Fl.20.0160 2MCA-RV-5017 RV 02/07/08 CLR N N N VT-08-017 M2.F1.20.0171 2MCA-SM-H141 SM 02/06/08 CLR N N N VT-08-019 M2.Fl.20.0341 2MCA-ND-5910 ND 02/07/08 CLR N N N VT-08-015 M2.F1.20.0505 2MCA-NV-5002 NV 02/05/08 CLR N N N VT-08-006 M2.Fl.20.0584 2MCA-NV-5302 NV 02/05/08 CLR N N N VT-08-010 M2.F1.20.0705 2MCA-SM-H 140 SM 02/06/08 CLR N N N VT-08-018 M2.F1.20.0760 2MCA-SV-H6 SV 02/06/08 CLR N N N VT-08-001 M2.Fl.20.0781 2MCR-CA-H168 CA 03/05/08 CLR N N N VT-08-041 M2.F1.20.0818 2MCR-NI-4034 NI 03/05/08 REC N N N VT-08-080 Welds on shim plate were broken, WO 01804236-01 repaired the shim plate. Attachment 301 statement states hanger acceptable for continued service. M2.F1.20.0862 2MCR-NI-4561 NI 03/05/08 CLR N N N VT-08-046 M2.F1.20.1001 2MCR-NV-4171 NV 03/04/08 CLR N N N VT-08-047 1:11:05 PM Page 5 of 9 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDOA Cat "C" SDQA Cat "C" McGuire 2 6/11/2008 McGuire 2 6/11/2008 1:11:05 PM Page 5 of 9

Inspection Results for McGuire Unit 2 EOC-18 

                                                      )nsp    Insp         Insp         jo Summary No          Component ID              System   Date    Status      Limited      Ref     RFR     Comment M2.F1.20.1002     2M.R-NV-4172                    NV 03/04/08  CLR           N           N       N       VT.08-048 M2.F1.20.1011     2MCR-NV-4181                    NV 03/05/08   CLR          N           N       N       VT-08-049 M2.Fl.20.1013     2MCR-NV-4191                    NV 03/05/08   CLR          N           N       N       VT-08-050 M21F1.20.1180     2MCA-CA-H11                     CA 01/28/08   CLR           N          N        N      VT-08-034 M2.Fl .30.0031    2MCA-KC-3332                    KC 02/06/08. CLR           N          N        N      VT-08-01 2 M2.F1.30.0032     2MCA-KC-3078                    KC 02/05/08   REC           N          N        N      VT-08-074 Base plate out of tolerance. W/R 948112 used to repair the base plate. Hanger acceptable for continued service no operability concerns.

M2.F1.30.0033 2MCA-KC-3030 KC 02/06/08 CLR N N N VT-08-011 M0 ------ K 058 LNN-- M2.F1.30.0034 2MCA-KC-3325 KC 02/05/08 CLR N N N VT-08-008 -M2.F1.30,0035 2MCA-KC-3150 KC 02/07/08 CLR N N N "VT-08-033 M2.F1.30.0036 2MCA-KC-3144 KC 02/05/08 CLR N N N VT-08-014 M2.F1.30.0037 2MCA-KC-3274 KC 02/06/08 CLR N N N VT-08-005 M2.F1.30.0248 2MCA-KC-3011 KC 02/06/08 CLR N N N VT-08-004 M2.Fl.30.0254 2MCA-KC-3020 KC 02/05/08 CLR N N N VT-08-007 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDQA Cat 'C" McGuire 2 6/11/2008 1:11:05 PM Page 6 of 9

Inspection Results fe, McGuire Unit 2 EOC-18 Insp Insp Insp Summary No Component ID System Date Status Limited Ref RFR Comment M2.F 1.40.0005 2RCP-B-SUPPORT NC 03/13/08 CLR N N N VT-08-062 M2.F 1.40.0073 2NDP-SUPPORT-2A ND 01/30/08 CLR N N N VT-08-024 1.40.0074 2NDHX-SUPPORT-2A ND 02/25/08 CL- N N N VT-08-025 M2.F M2.F 1.40.0075 2NSP-SUPPORT-2A NS 01/30/08 CLR N N N VT-08-026 M2.F 1.40.0080 2NSHX-SUPPORT-2B NS 01/31/08 CLR N N N VT-08-027 M2.F 1.40.0092 2NSHX-SUPPORT-2A NS 01/31/08 CLR N N N VT-08-028 M2.F 1.40.0104 2SWIF-SUPPORT-2B NV 03/21/08 CLR N N N VT-08-072 M2.F 1.40.0105 2NIP-SUPPORT-2B NI 01/29/08 CLR N N N VT-08-029 M2.F 2KFHX-SUPPORT-2A KF 01/29/08 CLR N N N VT-08-030 -1.40.0106 M2.F 1.40.0132 2CRDM-SUPPORT NC 03/31/08 CLR N N N VT-08-081 M2.F i1.1.0004 2RCP-2D NC 03/17/08 CLR N N N UT-08-013 M2.G N N N PT-08-004 M2.Gi3.1.0001 2NC2FW22-7 NC 03/10/08 CLR NC 03/10/08 CLR N N N *. UT-08-003 M2.Gi6.2.0001 2PZR-Manway NC 03/13/08 CLR N N N VT-08-064 M2.Q1.1.0001 2NC2FW2-NW6 NC 03/07/08 CLR N N N UT-08-001 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PM Page 7 of 9

Inspection Results tr- McGuire Unit 2 EOC-1 8 Insp Insp Insp -ao Summary No Component ID System Date Status Limited Ref RFR Comment M2.Q1.1.0002 2NC2FW61-NW4 NC 03/14/08 CLR N N N UT-08-009 M2.Q1.1.0003 2NC2FW53-NW1 NC 03/14/08 CLR N N- N UT-08-010 M2.Q1.1.0004 2NC2FW53-NW2 NC 03/14/08 CLR N N N UT-08-011 M2.Q1.1.0005 2NC2FW53-NW3 NC 03/14/08 CLR N N N UT-08-012 M2.Q1.1.0006 2NC2FW13-NW5 NC 03/09/08 CLR N N N UT-08-002 M2.R1.11.0143 2NV2F-84 NV 03/11/08 REC N N N RT-N/A Indication determined to be film artifact and found to be acceptable. M2.R1.11.0189 2NV2FW115-5 NV 03/14/08 REC 99.00% N N RT-N/A Indication determined to be film artifact and found to be acceptable. M2.R1.11.0275 2NV2FW215-48 NV 03/11/08 CLR N N N UT-08-005 M2.R1.11.0278 2RCHPSS-OUT-1 NV 03/17/08 CLR 95.60% N N UT-08-014 During 2EOC-18 this item was examined as an additional sample for Summary Number M2.R1.11.0279. Reference PIP M-08-01705. M2.R1.11.0279 2RCHP-IN NV 03/14/08 REP 78.00% N - Y RT-N/A This weld was found to be reportable during 2EOC-1 8, additional sample was performed on M2.R1.11.0278 (2RCHPSS-OUT-1) and found to be acceptable. (Reference PIP M-08-01705). Weld was repaired and reexamined on 4-13-08 and found to be acceptable. Weld Limited to 78.00% RFR to be submitted for limitation. SDQA Cat "Ce McGuire2 6/11/2008 1:11:05 PM Page 8 of 9 Printed 6/11/2008 1:12:07 Printed 6/11/2008 PM GJU8302 1:12:07 PM v.01/01/08 GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PM Page 8 of 9

Inspection Results fo- .McGuire Unit EOC-18 Insp Insp Insp -. o Summary No Component ID System Date Status Limited Ref RFR Comment M2.R1.1 1.0463 2NS2F427 NS 03/17/08 REC N N N RT-N/A Indication determined to be concavity and found to be acceptable. M2.R1.11.1534 2NV2FW115-4 NV 03/14/08 REC N N N RT-N/A Indication determined to be film artifact and found to be acceptable. M2.R1.11.1536 2NVP8-3 NV 03/11/08 CLR N N N RT-N/A Indication determined to be film artifact and found to be acceptable. M2.R1.11.1594 2NV2FW215-37 NV 03/11/08 CLR 97.70% N N UT-08-004 M2.R1.11.1598 2NV2FW215-49 NV 03/11/08 CLR N N N UT-08-006 M2,R1.13.0002 2RV2FW30-27 RV 03/20/08 CLR N N N UT-08-15 Printed 6/11/2008 1:12:07 PM GJU8302 v. 01/01/08 SDQA Cat "C" McGuire 2 6/11/2008 1:11:05 PIVI Page 9 of 9

4.1 Reportable Indications There was one reportable indication for the examinations associated with this report period. 4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair/ replacement activities, and corrective measures. There was one corrective action for the examinations associated with this report period. PIP M-08-1705 was written to document reportable indications found during RT examination on 2RCHP-IN (Summary Number M2.R1.11.0279). Plan Addenda 2MNS-034 was written to schedule one additional sample examination using ASME Section XI, IWC-2430 requirements of the 1998 Edition of ASME Section XI with the 2000 Addenda. The additional sample was scheduled and performed during EOC-18 and found to be acceptable. The reportable indications found during the RT examination were repaired during EOC-1 8. No code surveillance inspections are required because indications were repaired and found acceptable on 4-13-08. 4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke's Corporate Office in Charlotte, North Carolina. McGuire Unit 2 Page 2 of 3 Outage 3/EOC-18 Revision 0 Section 4 June 3, 2008

4.4 Limited Examinations Limitations (i.e., 90% or less of the required examination coverage obtained) identified for examinations associated with this report period are shown below. A relief request will be submitted to seek NRC acceptance of the limited coverage. This information will be on file at the Duke's Corporate Office in Charlotte, North Carolina. Item Number Percent Coverage M2.R1.11.0279 78.00% McGuire Unit 2 Page 3 of 3 Outage 3/EOC-18 Revision 0 Section 4 June 3, 2008

5.0 Owner's Report for Repair / Replacement Activities As required by the applicable code, records of Class 1 and Class 2 Repair and Replacement work is included on NIS-2 forms in this section. No item was determined to have had work performed outside this report period. Listed below is the information to address these issues. Work Order Number Signoff Date/EQO-C PIP Number N/A N/A N/A The NIS-2 forms included in this section were completed for work performed during this report period. The individual work request documents and manufacturers' data reports are on file at McGuire Nuclear Station. 5.1 Class 1 and 2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class 1 and 2 items during this report period. All Class 1 and 2 PSI examination data listed below is on file in the McGuire Nuclear Station QA Vault. Work Order Identification Number ISI Class 558698 Replace snubber on upper lateral support (SG-D) B 572524 Valve 2ND-3 replace body bolting B 586253 Replace body to bonnet bolting on Valve 2NV483 B 590178 Replace disc in valve 2NS44 B 590831-01 Replace 10 bonnet studs and 20 nuts on valve B 2FW28 590831-18 Machined 1" inspection port in bonnet and install B plug on valve 2FW28 592071-02 Replace valve 2BB1 B 592071-04 Replace material on hanger 2MCA-BB-5028 B 592071-23 Replace bolting material on hanger 2MCA-BB-5021 B 592072-02 Replace valve 2BB3 B 1702030 Work on hanger 2MCA-NI-5047 welds B 1710916 Replace disc in valve 2BB287 B 1713164 Replace body to bonnet bolting on valve 2NI184 B 1718559 Replaced valves 2Ni15 and 354 and seal welded A and replaced piping 1719700-06 Replace valve 2NC1 A 1719700-25 Replace load pin in hanger A 2MCR-NC-4034 1722213 Replaced valve 2NC2 A McGuire Unit 2 Page 1 of 4 Outage 3/EOC-18 Revision 0 Section 5 June 11, 2008

Work Order Identification Number ISI Class 1745170 Replaced snubber and bolting material in extension B piece on hanger 2MCA-CA-59 1745171 Replaced snubber on hanger 2MCA-CA-1 30 B 1745172 Replaced snubber on hanger 2MCA-CA-130 B 1745174 Replaced snubber on hanger 2MCA-ND-6380 B 1745175 Replaced snubber on hanger 2MCA-NV-7009 B 1745177 Replaced snubber on hanger 2MCA-SV-58 B 1745179 Replaced snubber on hanger 2MCA-CA-140 B 1745181 Replaced snubber on hanger 2MCA-ND-5508 B 1745182 Replaced snubber on hanger 2MCR-NI-4699 B 1745184 Replaced snubber on hanger 2MCA-SV-1 B 1745185 Replaced snubber on hanger 2MCR-NI-4026 B 1745187 Replaced snubber on hanger 2MCA-SM-152 B 1745189 Replaced snubber on hanger 2MCA-CA-89 B 1745190 Replaced snubber on hanger 2MCR-NI-4556 A 1745191 Replaced snubber and 3/8" bolt at bracket on B hanger 2MCR-NI-4043 1745192 Replaced snubber on hanger 2MCR-NI-4716 B 1745194 Replaced snubber on hanger 2MCA-NI-4722 B 1745195 Replaced snubber on hanger 2MCA-CA-56 B 1745197 Replaced snubber on hanger 2MCA-SM-104 B 1745201 Replaced snubber on hanger 2MCA-ND-5580 B 1745202 Replaced snubber on hanger 2MCA-ND-6181 B 1745204,. Replaced snubber on hanger 2MCA-SM-1 9 B 1745205 Replaced snubber on hanger 2MCA-SM-20 B 1745206 Replaced snubber on hanger 2MCA-SM-1 53 B 1745207 Replaced snubber on hanger 2MCR-NI-4661 A 1745208 Replaced snubber on hanger 2MCA-SM-74 B 1.745209 Replaced snubber on hanger 2MCA-SM-283 B 1745285 Replaced bolting material at inlet and outlet flange B at valve 2NS2 1747839 Replaced material on hanger 2MCA-BB-5489 B 1750367-01 Replaced bolting material in flange at valve 2NV220 B 1751042 Replaced control valves on snubber at upper lateral B support SG-A 1751150 Replaced disc and bonnet on valve 2NM6 B 1761865 Replaced item 9 and 10 on hanger 2MCR-NV-4218 B 1761865-01 Replace valve 2NV841 and associated piping A 1761865-13 Replaced item 2 on hanger 2MCR-NV-4781 B 1769371 Replaced valve 2NC3 A 1799893 Replaced pivot pin in hanger 2MCA-CA-87 B McGuire Unit 2 Page 2 of 4 Outage 3/EOC-18

  • Revision 0 Section 5 June 11, 2008

Work Order Identification Number ISl Class 1801521-01 Seal welded body to bonnet on valve 2NI349 A 1802555 Replaced snubber on hanger 2MCA-S-NV-535-01 -H B 1802706 Replaced load pin in hanger 2MCR-NI-4025 A 1802766-01 Repaired weld 2RCHP-IN B 1802942 Replace items 3, 4, and 5 on hanger 2MCR-NV- B 5055 1803324 Replace snubbers on hanger 2MCR-NV-4106 A 1803674 -Replace snubber and adapter plate on hanger A 2MCR-NC-4272 1804042 Replace snubber on hanger 2MCA-NV-5315 B 5.2 Class 3 Preservice Examinations The Class 3 NIS-2 forms are not required by code for reporting purposes. The Class 3 forms are listed here to assist in the ISI Plan review process. Work Order Identification Number ISl Class 583573-07 Weld build-up on top and bottom of casing C 2RNPU0004 1699256 Piping added to RN system per MD200353 C 1699326-01 Replaced studs and nuts in flange 2KC4-FI2 at C valve 2KC57A 1699327-01 Replace bolting material in flange at valve 2KC82 C 1730869-39 Install new hanger on 2MCA-RN-3404 C 1730869-40 Install new hanger 2MCA-RN-3405 C 1730869-41 Install new hanger 2MCA-RN-3406 C 1730869-42 Install new hanger 2MCA-RN-3407 C 1730869-43 Install new hanger 2MCA-RN-3408 C 1730869-44 Install new hanger 2MCA-RN-3409 C 1730869-45 Install new hanger 2MCA-RN-341 0 C 1730869-46 Install new hanger 2MCA-RN-3411 C 1730869-47 Install new hanger*2MCA-RN-3412 C 1730869-65 Added piping and valves 2RN1086 and 2RN1087 C 1734686 Replace bolting in filter trap at flange 2NVFLOO51 C 1745180 Replace snubber and mounting bolting material on C hanger 2MCA-NB-14 1745196 Replace snubber on hanger 2MCA-KC-3030 C 1758578 Replaced bolting material in bonnet on valve 2LD32 C McGuire Unit 2 Page 3 of 4 Outage 3/EOC-18 Revision 0 Section 5 June 11, 2008

Work Order Identification Number ISI Class 1763015-26 Installed new hanger on 2MCA-RN-3413 C 1763015-32 Added piping and valves 2RN408 and 2RN410 C 1763015-46 Installed new hanger on 2MCA-RN-3413 C 1763617-32 Replaced valve 2RN69 C 1763617-60 Added item 12 on hanger 2MCA-CA-5625 C 1764228-32 Cut out and replace valve 2CA86 C 1785753 Added piping and valves 2RN404 and 2RN409 C 1801758 Replaced snubber on hanger 2MCA-KC-3332 C 1801841 Replaced snubber on hanger 2MCA-RN-3019 C 1802868 Added piping on RN System C 1802998 Replaced valve 2RN285 C 1805056 Replaced snubber on hanger 2MCA-CA-128 C McGuire Unit 2 Page 4 of 4 Outage 3/EOC-18 Revision 0 Section 5 June 11, 2008

FORM NIS-2 OWNER'S REPO' OR REPAIR / REPLACEMENT ACTIVITY As Required By The P,..,sions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 18, 2008 526 S.-Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 032 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #- 558698 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair ! Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Seral No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No Upper lateral Duke Power 88765043/2 N/A N/A N/A 0 Replaced, I support S/G D _0 Replacement 0 Yes B 0 Repaired, 0 No Upper lateral Duke Power 88765043/9 N/A N/A N/A 0 Replaced, support S/G D E_ Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                              "__  _0             Replacement                0   Yes E                                                                                                                                               0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement ,0                 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each 3heet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work -Replaced snubber.
8. Tests Conducted:Hydrostatic LI Pneumatic [1 Nom. Operating Press. LI Other LI Exempt-Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports tobe attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech SDecialist Date 

                      - 'Ofwnerf6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by I       e inspected the components described in this Owner's Report during the period 0     to-         -O, ;and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection., r -*ý ý--erome F Swan Commissions NC1524, N-I Inspector's ,"nature National Board, State, Province and Endorsements Date Page 2 of 2

FORM NIS-2 OWNER'S REPO' -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Pi,..,sions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date September 13, 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 572524 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2ND-3 Dresser TH-03997 1937 N/A 1987 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes B                                                                                                                                              0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes C                                                                                                                                              0  Repaired,                  0 No 03 Replaced,

_ _ _ _0 Replacement 0 Yes D 0] Repaired, .0 No 0- Replaced, S"0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this iorm.

7. Description of Work -Replaced body bolting
8. Tests Conducted:Hydrostatic 0 Pneumatic El Nom. Operating Press. 0l Other El ExemptlI Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure _psig Test Temp. OF
9. Remarks A functional will be Derformed when the snare valve is Olaced into the system. Q (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date  ? /J2,o ' 

                       -vner orOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period
-oandtatetaebe 9-7  ; hat otandbesot of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. - rome F Swan Commissions NC1524, N-1 Inspector's nAnure National Board, State, Province and Endorsements Date *-/7 a ',"7 Page 2 of 2

FORM NIS-2 OWNER'S REPO' --OR REPAIR / REPLACEMENT ACTIVITY As Required By The P. .-ions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date April 9, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 122 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #:

Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job # Type Code Symbol Stamp: N/A Authorization No. N/.LA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV- Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, El No 2-NV-VA-483 Dresser TE09055 414 N/A 1978 0 Replaced, [0 Replacement 0 Yes B El Repaired, El No El Replaced, 0_ Replacement El Yes C El Repaired, 0] No o Replaced, _ Replacement 0l Yes - D 0l Repaired, El No El Replaced, El Replacement 0 Yes E 0l Repaired, El No El Replaced, 

                                                                                                                                             ]0 Replacement                0l Yes F                                                                                                                                            El Repaired,                  El No El Replaced,

__ Replacement El Yes Page 1 of 2

Form NIS-2 (Back), NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced body to bonnet boltinq.
8. Tests Conducted:Hydrostatic 0 Pneumatic EJ Nom. Operating Press. E1 Other 0 ExemptO Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional performed per task 3.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date .:01ýZ/;Z,*o3 Owner oF Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected tk components described in this Owner's Report during the period 

            - / 1- C)ýA' to Yf/0-/"--; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injry or property damage or a loss of any kind arising from or connected with this inspection..._*_ erome F Swan Commissions NC1 524, N-I SInspector atureNational Board, State, Province and Endorsements C kDate

  • Page 2 of 2

FORM NIS-2 OWNER'S REPC FOR REPAIR / REPLACEMENT ACTIVITY As Required By The F-,dsions Of The ASME Code Section XA

1. Owner Address: Duke Power Company la. Date April 09, 2008 526 S. Church Street, Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 032 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 590178 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/AA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NS - Containment Spray 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 03 No 2-NS-VA-44 Kerotest S18-8 411 N/A 1973 0 Replaced, 

                                                                                                                                             ]0 Replacement                0   Yes B                                                                                                                                             0 Repaired,                   0 No 0 Replaced, 0 Replacement                 0   Yes C                                                                                                                                             0 Repaired,                   0 No 0 Replaced,
                                                                                                                                             ]0 Replacement                0   Yes D                                                                                                                                             0 Repaired,                   0 No 0 Replaced,
                                                                                                                           "___0                Replacement                0   Yes E                                                                                                                                             0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Reolaced disc.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. l] Other El Exemptl Pressure _psig Test Temp. OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF
9. Remarks Functional preformed per task 03.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed % & FL Grass Jr,QA Tech Specialist Date "/ __ 

                       - O-wner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspe ted the.omponents described in this Owner's Report during the period

_ -oLto -G?-&and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for 

        .any personal injury r property damage or a loss of any kind arising from or connected with this Sinspection.,t-/-/

rome F Swan Commissions NC1524, N-I inspector's- 

         ,,--             ature                                     National Board, State, Province and Endorsements

( Page 2 of 2

FORM NIS-2 OWNER'S REPOt -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Pr.. ,-ionsOf The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 18, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 ' O-Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 590831-01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: FW- 4. (b) Class of System: B
5. (a) ApplicableConstruction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, E0 No 2FW-VA-28 Walworth C56162 127 N/A 1974 0 Replaced, 21 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                           "_0              0  Replacement                0 Yes E                                                                                                                                            0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                            ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Reolaced 10 bonnet studs and 20 nuts.
8. Tests Conducted:Hydrostatic 0] Pneumatic LI Nom. Operating Press. I] Other El Exempti Pressure psig Test Temp. OF__

Pressure psig Test Temp. OF__ Pressure psig Test Temp. ____F

9. Remarks functional performed per task 09.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date Owner opOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 16,09 to-3.. _1-/- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                          ,ZJ.-k1--lJerome F Swan          Commissions          NC1524, N-I Inspector's Signia re                                    National Board, State, Province and Endorsements Date 7-1 Page 2 of 2

FORM NIS-2 OWNER'S REPC :OR REPAIR / REPLACEMENT ACTIVITY As Required By The P,ý-isions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 8. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 590831 -18 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: FW- Refueling Water 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 01 No 2FW-VA-28 Walworth C56162 127 N/A 1974 0 Replaced, 

                                                                                                                                              ]0 Replacement               [0 Yes B                                                                                                                                              0  Repaired,                 0 No 0  Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0l No 0 Replaced, 

                                                                                                                                              ]0 Replacement               0   Yes D                                                                                                                                              0  Repaired,                 0 No 0  Replaced, 0  Replacement               0 Yes E                                                                                                                                              0  Repaired,                 0 No o  Replaced,
                                                                                                                                              ]0 Replacement               0   Yes F                                                                                                                                              0  Repaired,                 0 No 0  Replaced, D0 Replacement               0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each 

;heet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
7. Description of Work Machined 1" inspection port in bonnet and installed plug.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. l] Other El ExemptO Pressure psig Test Temp. 9°F Pressure psig Test Temp. °OF Pressure psig Test Temp. OF
9. Remarks functional performed on task 26 per procedure MP/0/A/7700/045.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed _ FL Grass Jr,QA Tech Specialist Date le Owner '76wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected thecomponents described in this Owner's Report during the period 

          "-/-'--        0 8 to l7-P- OT.'; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this I~_,,,,,inspection". ' nsetn.erome F Swan Commissions NC1524, N-I Inspector's Sgrfat#e National Board, State, Province and Endorsements C Date apoy Page 2 of 2

FORM NIS-2 OWNER'S REP( 'FOR REPAIR / REPLACEMENT ACTIVITY As Required By The, ..-visions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hacaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 013 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 592071-02 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/._A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2BB-VA-1 Borg Warner 29936 1045 N/A 1978 0 Replaced, 

                                                                                                                                            ]0  Replacement               0   Yes B                                                                                                                                            0   Repaired,                 0 No 2BB-VA-1                Flowserve Corp             E-496P-1-1                    2223                  N/A              1999      0   Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, El Replacement 01 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                          "_                []0 Replacement               0   Yes E                                                                                                                                            0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                            ]0  Replacement               0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced material per MD201761.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. 21 Other El Exempto Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional test performed per task 02.

(Applicable Manufacturers Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed _-YO FL Grass Jr,QA Tech Specialist Date ___ Owner o(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT hae inspected the omponents described in this Owner's Report during the period a 0to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for [Finspection. any personal in' ry or property damage or a loss of any kind arising from or connected with this erome F Swan Commissions NC1524, N-I Inspector's Kgature National Board, State, Province and Endorsements Page 2 of 2

FORM NPV-I MANUFACTURERS" DATA REPORT FOR NUCLEAR PUMPS OR VALVES As Required by the Provisioas of the AiE Code Rules Flowserve Corp. ..Manufactured by 701 First Street, Williamsport, E496P-I PA 17701 Order No (Newse & Address a( Mamn*mcturr) Duke Energy Corporation, P.O. Box 1015, Charlotte, NC. Ordec MN 49678

2. Manufactured foe (Nine and Address)

ZZ801-1015. Duke Energy Corporation 3. Loc ooflPlantMcGuire Nuclear Station, 13225 Hagers Ferry Rd., Huntersville, NC.

4. 28078-8985.
5. Pump or Valve [denuification-Valve, Two (I), 2"-l5O0#-.GateValve.

Serial Numbers: E496P-1-1 and E496P-l-2 (Brief description t service far which equipment was designed) ()DaigN.No. (a) Drawuig 74450 R/C Peadby Prepared by Flowserve Corp. (b) National Boid No.INB# 2223, NB# 2224 Design Conditions 3600 O too O (Pressure) (Temperature) 2

7. The material, design, construction, and workmanship complies with ASME Code Section [il. Class Edition_ 971_ _ , Addenda Date (S) 1973 Case No. N/A Mark Na Z- aT:-L Spec. No. Manufacturer Rom arkcs (a) Castings
4. ----- 1~

Disc: Pc#l. Pr4#2 qARI ..CF8M CMI 

       ..     -Ht#--L-795.5--                             *-----*-*****........

(b) Forgings ____ Body: SN 11, SN 12 SA182-F316 BW/IP Pump Div. R -3038 iC: A5 . Bonnet: PC# 1., PC# 2 SA182-F316 Mid-Southern HT# L49056 ____________ Ai %k V

(c) (d) 5400

8. Hydrostatic tes rPs.

CERTIFICATION OF DESIiGN Design information on file at Flowserve Corporation, Williamsport, PA. 17701 Stress analysis report on file at 3 amie as above 4237 Design specifications certified by R. E. Mi 1l er (1) Prof. Eng. State SC Reg. No. Stress analysis report certified by N/A (1) Prof. Eng. State - Reg. No._ (1) Signature nor required. List name only. We certify that the statements made in this report are correct. Date /o/27/9 19 - Signed Flowserve Corp (Manufacturer) 8 Certificate of Authorization No. N3.712 expires 4/15/01 CERTIFICATE OF SHOP INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State ofRR;wn~ x of P-,Ran-y, I- A and employed byCOmm~rt'.l Hninn Tne_ .'n of BORn fln. MA have inspected the equipment described in this Data Report on '/'// ")K1-, _ and state that to the best of my knowledge and belief, the Manufacturer has constructed this equi.pmenc in accordace with the applicable Subsections of ASME Code, Section IIL" By signing this cercificace, neither the Inspector nor his employer makes any wananty, expressed or implied, concern-ing the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                           '_#1 - --) AV Date                     L/   -1     '      9 e-e 1-(LoflmmssLonts
4. 1) 1 n Is Proinc 1/ /2a 0 N.)<*LILI 'V Cha Young (14ationet 8aaed. Stat..s Province and No.)

Printed in U.S.A. (7/71) This fonn (E37) is obtaInable from the ASMZ. 34S E. 47th St.. New York. N.Y. 10017

FORM NIS-2 OWNER'S REPOh. ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 3. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company Address: 3a. Work Order #: 592071 -- 4 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B
5. (a) Applicab!e Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Code Cases Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Name of Mfg Column 8 Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, El No 2MCA-BB-5028 Duke Power N/A N/A N/A N/A 0 Replaced, _l Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                            ]0 Replacement                0 Yes C                                                                                                                                            0 Repaired,                   0 No 0 Replaced,
                                                                                                                                            ]0 Replacement                0   Yes D                                                                                                                                            0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 10 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced material per MD201761
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptOl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed\* eMLý*2 FL Grass JrQA Tech Specialist Date _____ Owneri'r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSBCT_ aIe ins ected th* components described in this Owner's Report during the period to i5* O"; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                     /(      '*      Jerome F Swan         Commissions          NC1524, N-I Inspectors Sig?Oture                                     National Board, State, Province and Endorsements C       Da~te I/j;oQ                 0 Page 2 of 2

FORM NIS-2 OWNER'S REPOR', . JR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date April 1,2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 592071 -2.

Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job # Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B 5.. (a) Applicable Construction Code: ASME II1 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section X1 Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 01 No 2MCA-BB-5021 Duke Power N/A N/A N/A N/A 0 Replaced, [] Replacement El Yes B 0 Repaired, El No O Replaced, 0] Replacement El Yes C 0 Repaired, 0 No O Replaced, 0 Replacement 0 Yes D 0 Repaired, El No 0 Replaced, 0_ Replacement El Yes E E Repaired, El No 0 Replaced, O Replacement 0 Yes F 0 Repaired, 0 No El Replaced, __ Replacement 0l Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced boltinci material.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptlA Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date ___,5ýo Owner or'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3 - ZJ'- oF3 to /-' 2-_- O.' ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for. any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                         !Iw,.
  • erome F Swan Commissions NC1524, N-I Inspector's S"igature National Board, State, Province and Endorsements

( Date //- OR - d..oo-(* Page 2 of 2

FORM NIS-2 OWNER'S REPOR) . J3R REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comwany la. Date April 10, 2008 526 S. Church Street, Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Comoanv 3a. Work Order #:

Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job # Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Name of Component Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                                                                                                                                     ,_Installed                 (yes or no)

A 0 Repaired, 2BB-VA-3 01 No Borg Warner 9089 105 N/A 1976 0I Replaced, [0 Replacement 0 Yes B 0 Repaired, 0I No 2BB-VA-3 Flowserve Corp 53BDY 1554 N/A 2005 0 Replaced, 21 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0 Yes F                                                                                                                                               0 Repaired,                   0 No 0 Replaced,
                                                                                                                                               ]0 Replacement                0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced material per MD201761.
8. Tests Conducted:Hydrostatic E Pneumatic EJ Nom. Operating Press. 2] Other 5 ExemptD Pressure _psig Test Temp. OF Pressure _psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional test performed per task 02.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed k*d 1 FL Grass JirX)A Tech Rnecialist Date *p It' OA Grass JrTitle FL Designee, Owner oeOwner's Tech Specialist CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSBCTh e inspected th components described in this Owner's Report during the period to .'i'//./'.to ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for inspection. 

                 ',                   Jerome F Swan        Commissions           NC1524, N-I Inspector's Sigature                                      National Board, State, Province and Endorsements I

Page 2 of 2

FORM NPV-1 N CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES" As Required by the Provisions of the ASME Code , Section III. Div. I Pg. 1 of 2 Manufactured by IMlnwci'rvp C-nrn- n. lamf C ~.A. Cf ID- - i- ' (No'no and Adkm= o NCa~ft. Haid-) 2_ Manufactured for DukeEneE Colp. PO Bx 1015 Charlotte. C221lt (NwmwwWdAdmu d Pwdusor Ow-

3. Location of Installation McGuire Station 13225 Havers Ferry Rd. RWY 73 Huntersville. NC 28078-8985 7 (Nan .O AdM*)
4. Pump or Valve Valve Nominal Inlet Size 2" Outlet Size 2" (Exi)

(a) Model No. (b) N (c) Canadian Series No. Certificate Registration (d) Drawming (1)Nat'L (g) Year Holder's or Type No. No. -(e) Class Bd. No. Built Serial No. (1) 1500# 7 53BDY/ N/A 74450 REV. B 2 Z 1554 2005 / (2) (3) (4) (5) (6) (7) (8) (9) (10)

5. 2"-1500#-GATE VALVE (Cre de*swW, c ro o¢ tfor ht'h equpmwt ww csnigerd) 34252 Design*Conditions 1200 psi 567 'F or Valve Pressure Class 1500 (1) 7 Cold Working Pressure G. ' psi at 100OF.

aI. Pressure Retaining Pieces Mark No. Material Spec. No. Manufacturer Remarks (a) Castings ". L7795 - SA351-CFSM Flowserve Gate 85500 '- SA182-F316 Flowserve' Bonnet 85511 = SA182-F316 Larson Body (1) For manually operated valves only

  • Supplemental si in fomof lists. skeches or drawingsmay be used provided (1) size is 8-1/2"x1x,1, (2) iformation in items 1, 2 and 5 on this -

Data Report is Included on each sheet, and (3) each sheet is numbered and number of sheets is recorded at top of this form. 2-

FORM NPV-1 (Back) Pg. 2 of .2 Valve S/N 53BDY/through j' Mark No. Material Spec. No. Manufacturer Remarks (c) Bolting (d)Other Parts "_,_.....

9. Hydrostatic test 5400 psi. Disk Differential test pressure 3960 psi.

I We certify CERTIFICATE OF COMPLIANCE that thre statemients made in this report are correct and that this pump, or valve, to the rules of construt ronforms 1971 of .the ASME Code for Nucle Po er Plant Components. Section Ill, Div. 1., Edition Addenda Summer 1973.-K Code Case No. N/A , Date Signed FIoWserve Corp. by (NCScthiatieo hoo Our ASME Certificate of Authorization No. to use the N symbol expires

  • N-1562 11-26-06 (NI Uratel CERTIFICATION OF DESIGN Design information on file at Flowserve Corporation Raleigh, NC Stress analysis report (Class 1 only) on file at Design specifications certified by (1) RPE. Miller PE State SC Reg. No. 4237 Stress analysis certified by (1)

PE State Reg. No. (1) Signature not required. List name only. CERTIFICATE OF SHOP INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT of Hartford Connecticut have Inspected the pump, or valve, described in this Data Report on J _ 6.- and state that to the best of my knowledge and belief, the N Certificate Holder has constructed this pump, or valve, in accordance with ASME Code, Section Ill By signing this.certificate neither the Inspector nor his employer makes any warranty, expressed or implied. conceming the equipment described in this s Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property dama ora loss of any kind arising from or connected with this Inspection. DatedJ.?. Lo.L-Signed _K~1 ' M1. A,.A_ Commission Llrt/VA -- 

                                                                                                                               .K;t --                I     03, (NMn 8d.. SlaW, Prio. ard No.)
                 / --       -   '   ( kapctl

[bfYJ (52-

FORM NIS-2 OWNER'S REPOI-, .-OR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date March 24, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1702030 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, 0 No 2MCA-NI-5047 Duke Power N/A N/A N/A N/A 0l Replaced, [0 Replacement El Yes B 0 Repaired, El No [] Replaced, [] Replacement El Yes C El Repaired, 0l No 0l Replaced, _ Replacement El Yes D El Repaired, El No El Replaced, 0E Replacement El Yes E El Repaired, El No El Replaced, _E Replacement El Yes F E Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Cut items 3 and 4 then welded together after valve work completed.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exempt[o Pressure _psig Test Temp. OF Pressure _psig Test Temp. OF Pressure _psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed *"J.iaw FL Grass Jr,QA Tech Specialist Date -2 : Owner or,6wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 13 -c' to 2Z.1--OSand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. a ,rome F Swan Commissions NC1524, N-I Inspectors Si nature National Board, State, Province and Endorsements Date Dý -x2oY2P Page 2 of 2

FORM NIS-2 OWNER'S REPOR, . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1710916 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. NIA Expiration Date: N/A 3b. NSM or MM #: ME201572

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2-BB-VA-287 Kerotest 96EP0329 N/A N/A 1996 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes B                                                                                                                                             0  Repaired,                  0 No 0  Replaced,

_0 Replacement 0 Yes C 0 Repaired, 0 No o Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes E                                                                                                                                             0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced disc.
8. Tests Conducted:Hydrottatic 0 Pneumatic [] Nom. Operating Press. R1 Other El Exempto Pressure psig Test Temp. OF Pressure _psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional test performed per task 5.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of A thorization No. N/A Expiration Date N/A Signed \ FL Grass JrQA Tech Specialist Date ___ Owner wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected t, components described in this Owner's Report during the period 3 _ -Lz:J_0o L/y-[q_  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inWury or property damage or a loss of any kind arising from or connected with this inspection. Jerome F Swan Commissions NC1524, N-I Inspector's 61gnature National Board, State, Province and Endorsements C Date_______ Page 2 of 2

FORM NIS-2 OWNER'S REPOQ OR REPAtR t REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 9, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a., Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 1713164 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Injection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, El No 2-NI-VA-1 84 Walworth C55814 119 N/A 1974 El Replaced, [0 Replacement [] Yes B E Repaired, El No O Replaced, 0_ Replacement El Yes C El Repaired, El No El Replaced, 0E Replacement El Yes D El Repaired, El No El Replaced, DE Replacement El Yes E El Repaired, El No 0l Replaced, 0E Replacement El Yes F El Repaired, El No El Replaced, 0E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced body to bonnet bolting.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. l] Other E ExemptD Pressure psig Test Temp. OF Pressure psig Test Temp. _ F Pressure psig Test Temp. OF
9. Remarks Functional performed per task 8.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \ FL Grass Jr,QA Tech Specialist Date ____ 

                       'Owner ýOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the, components described in this Owner's Report during the period 24~              to zc-/a - Q5; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be: liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. // e F Swan Commissions NC1524, N-I Inspector' i ature go(y:1 National Board, State, Province and Endorsements q-/0)- Date Page 2 of 2

FORM NIS-2 OWNER'S REPORI ,R REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 EShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1718559 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Injection 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, C3 No 2NI-VA-15 Kerotest RT2-9 18123 N/A 1977 01 Replaced, 0_ Replacement 0 Yes B [ Repaired, El No 2NI-VA-15 BW/P International 96EP0224 82 N/A 1996 0l Replaced, 120Replacement 01 Yes C El Repaired, El No 2NI-VA-354 Kerotest NU3-1 12030 N/A 1976 0 Replaced, 0_ Replacement 0 Yes D El Repaired, El No 2NI-VA-354 BW/P International 96EP0223 81 N/A 1996 [] Replaced, E 2] Replacement 0Z Yes El Repaired, El No NI Piping Duke Power N/A 83 N/A 1982 El Replaced, F E0 Replacement 0 Yes El Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valves, seal welded, and piping between welds N12FW89-5 and 6.
8. Tests Conducted:Hydrostatic 0 Pneumatic El Nom. Operating Press. 0l Other El Exemptl Pressure 2485 psig Test Temp. Ambient OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks test performed per MP/0/A/7650/076 on task 29.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE. I certify that the statements made in the report are correct and this conforms to the requirements of the ASMECode, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed *.'*/ 4 FL Grass JrQA Tech Specialist Date - o, Owner^Owners Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspted th components described in this Owner's Report during the period 1L -/,7to -/Ž-LQ*; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. - rome F Swan Commissions NC1524, N-1 Inspector's ,0650ture National Board, State, Province and Endorsements Date . / -. O Page 2 of 2

03/29/08 SAT 13:58 FAX QA LAB U001 FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES-As Required by the Provisions of the ASME Code, Section III. Division I Pg. 1 of.2

1. Manufactured and certified by PIMP DIV., ]U, ANG OEES .P.C2300o . Z=0 AVZ-VE . MJ 9C58 4teme WA d*rets of N C fiieat. Holder)
2. Manufactured for DUE P CO. Sc*uI SITE 13225 B ?m 1w), HWY 73 HI3T ,ILLE, NC 28078-8995 (name ard addrese of Pwcha$qofl
3. Location of Installation D=E !OlR CO. MCG0U] SXT1 13225 NALG EM R). lINT 73 191=71[LLE NC 28078-6985 (name and addreaal
4. Modal No.. Series No., or Typeo C rawlngDP-D9958-(1) _ ay. D CAN N/A S. ASME Code, Section III. Division 1; 1971 - WIN= 1971 1 N/A (edition) leddemle date) Icieael (Code Ce.. no.)
6. Pump or valve ___' ____Nominal inlet size 1] Outlet size "_ _

(In.l Iin.i

7. Material: Body 5A152 fi* 7316 Bonnet N/A Disk SA479 TM 316 Bolting W/A (al (b) 10 Id) (e)

Cott. Nat'l Body Bonnet Disk Holder's Board Serial Seriol Serial Serial No. No. No. No. No. 961*P223 81 320470 51J "/ N .. 313803_51(27 96NP0224 82 320470 M N/A 313803 *f4* 96 2583 319759B W~ MUU-4 W/A31 0Em Suppleemantal Informatlo*a inform ofIlls", sketches, or drawings may be u$od provided 11)size is 6 x 11. relInformation in Items 1 through 4 an this Data A=eort Is ectuvded on each sheet, (3) each sheet Is numbtnrd end the number of aheem Is recorded at the top of this form. 112188) This form lE000?) mry be obtained from the Order Dept.. ASME, 22 Law Drive, Dox 2300, FaIrflield, NJ 07007-2300.

03/29/08 SAT 13:58 FAX QA LAB (ao02 FORM NPV-1 (Back - Pg. 2 of.*__) 2]*223 TMi Certificatm Holder's Serial No. 9%610225 3600 1001011

8. Design conditions psi PSI0 100 OF or valve pressure clues 1500i iprusauril Itempertu*rell
9. Cold working pressure 3600 psi at 1O0OF
10. Hydrostatic test 5400-5450 psi. Disk differential test pressure 3960-4010 psi
11. Remarks: MTUnTRM CDVR.: WA82 GR 7316 . MOIPLA7B AI'!AC BY WMR

(= B3WDLS SK COVER SM 

                $61D223                                         314449A SN 96EP224                                         314449A ON4 96M225                                          314449A SM CERTIFICATION OF DESIGN Design Specification certified by               EUE*i E] r*
                                                       ]M                                   P.E. State          N.C.           Reg. no. 4860 Design Report certified by          LAV[D A.        M                                P.E. State          CA             neg. no. M19547 CERTIFICATE OF COMPIJANCE We certify that the statemernts made in this report ate correct end that this pump or valve conforms to the rules for construction of the ASME Code, Section Ill. Division 1.

N Certificate of Authorization No ' --1130 .xp- loM ]9*cI Date." ,me mE-O.I4L DI:. Signed' IN Certilftilte Holder)  ; epresent"Yel CERTIFICATE OF IN SPECT1ON I. the undersigned, holding a valid commission issued by the National Board of Boiler end Pressure Vessel Inspectors and the State or Province of e0nd employed byV*!!Ti*'f NMML DO. CD. of WO0DM have inspected the pump, or valve, described in thIs Date Report on 9LL'//i_/4/ . end state that to the beat of my knowlaege end belief, the Certificate Holder has con-stnucted this pump, or valve, in accordance with the ASME Code. Section III. Division 1. EMlf UTUAL D1MMM E AS80~!CVZ= By signing this certificate, neither the Inspectot nor his employer makes any warranty, e*ptes*ed or Implied, concerning the cornponent described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for arty personal Injury or property dom.,ge or a loss of any kind arising from or cooncted with this inspection. atSig 

                                    "---i      rled Insp,.ec.*

Commissions [Nat'l. 5d. l.de A '/ C or prey. 1nd state , 6L end no.] (1) For manually operated valves only.

Enclosure 4.13 SM/O/A/8140/001; NIS-2 Owner's Report Page I of I Work Request/WO Task # 0171 d'559ý-c/ Section A Section B Section C OLD Component Removed From System Or OLD Component .To Be Repaired NEW Replacement Component Component # Component Being Manf. Manf. National ASME Code Year Manf. Manf. National ASME Code Year Replaced/Repaired Name Serial # Board # Stamp Built Name Serial # Board # Stamp Built YES/NO YES/NO EXAMPLE Replaced Kerotest 1234 3 1976 BWIP 5678 5 1998 Valve I-NV-98 EXAMPLE Repaired Kerotest 5678 4 1977 Valve I-NV-99 QI Ink-e 94!'oeC L

Receiving Inspection Report Form NPP-311A Rev.: 4 Page 1of 2 Purchase Order No MN10751 E NPP-315 StocklCat ID: 224685  ! ID: 19512 Station C MEDB ID.: 235100526N Part No.: 09J-003 OA Shop No.: 0669 Vendor [BW/IP INTERNATIONAL INC Manufacturer: IKEROTEST MFG. CORP. Item No. Quantity UTC No. Heat No. Lot NoJBatch No. Serial No. 96EP0223 1 I [ -Ii I 850762 NA NA

Description:

VALVE,CHECK,Y,1-1/2",09J-003,ASME CLASS 1500,SW,SS,KEROTEST MFG. CORP.,ASME CLASS 1 CK'd SAMPLE Duke/ Inspection, Examination, and Testing Procedures/Standards By Size Pass Fail Vendor Performed - Specify Used Visual/Configuration/Workmanship NPP-311 Rev.: 4 CD] L--- 1PII-w Dimensional RJ Approx. El Tolerance ElectricalI CDomment LIZWZ W ] ED Magnetic (0) Yes ( No I Weight Pressure: Chem. Analysis: S] I GQA Condition: Physical Properties: E] LIZ~F l EZIEi Other F E] Commercial Grade Over-Check Comments iI Calibrated Test, Examination, and Inspection Equipment Used: Instrument Type Model Number Serial Number Calibration Due I. Description of Problem [ Problems Sent To:j I S V:[ Originator: Phone #:1 1 FAX #:Z ] Date: Z Accepted By: F Date: (Level II Receiving Inspector) Final GA Approval: F I Date:

Receiving Inspection Report Form NPP-31 1 A Rev.: 4 Page 1of 2 Purchase Order No MN10751 ED NPP-315 Stock/Cat ID: 1 224685 ID: 19513 Station M MEDB ID.: 235100526N ] Part No.: 09J-003 QA Shop No.: 0669 Vendor [BW/IP INTERNATIONAL INC Manufacturer: IKEROTEST MFG. CORP. Item No. Quantity UTC No. Heat No. Lot NoJBatch No. Serial No. 1IZ I1I [852259 NA NA 96EP0224

Description:

VALVE,CHECK,Y,1-1/2",09J-003,ASME CLASS 1500,SW,SSKEROTEST MFG. CORP.,ASME CLASS 1 CK'd SAMPLE Duke/ Inspection, Examination, and Testing Procedures/Standards By Size Pass Fail Vendor Performed - Specify Used FD FD] vlsua,/Configurationlorkmanship Vi NPP-311 Rev.: 4 

                *CD                              D     RI Dimensional           RJ Approx.      [] Tolerance LI           [IIZ----        ]        I----- []0 Electrical
              -           -CD     FLZ
                                    - -        [[D]    RJ magnetic            0 Yes (i) No I------              [I-----
                       -- - -                       []     Weight r-I-----Z][----            I---]        []E    Pressure:       I__

LI -ElI ElI [ [] E0 Chem. Analysis: 0QACondition: [j I F] E LI Physical Properties: E__ Commercial Grade i _ [__ ] [- Other F_] []Over-Check Comments Calibrated Test, Examination, and Inspection Equipment Used: Instrument Type Model Number Serial Number Calibration Due I. Description of Problem El Problems Sent To: S V: Originator: Phone #:Il FAX #: ] Date: j Accepted By: [ Date: (Level II Receiving Inspector) Final OA Approval: Date: I

FORM NIS-2 OWNER'S REPOF OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 212 03 OShared (specify Units 31 Work Performed By: Duke Power Company 3a. Work Order #: 1719700-06 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. -N/AExpiration Date: N/A 3b. NSM or MM #:1 N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2NC-VA-1 Crosby N56925-00-0006 30 N/A 1974 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 2NC-VA-1 Crosby N56925-00-0003 27 N/A 1974 0 Replaced, _[]0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes D                                                                                                                                            0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. 0 Other El ExemptFl Pressure 2235 psig Tes t Temp. 558 OF Pressure _psig Tes t Temp. OF Pressure _psig Tes t Temp. -°F
9. Remarks Functional test performed per task 4.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date 2_i,o Owner or'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3-6o - O to i- /-Z ,; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. 

           *          ,.*
  • rome F Swan Commissions NC1524, N-I Inspector's i ature I/ National Board, State, Province and Endorsements

( Date iL i2 Page 2 of 2

r 

                                           -   -"     C.-OS            Y    VALV-E               GA                Coll, Yi R E NTH1, H ., H-A S,.-

FORM NV--I FOR SAFETY AN;D SAFETY R.LIEF VALVES Q.C.-,44Ai - .1 1' As required by tte Provisior.s of the I..ME Code Rules DATA REPORT LTB-27 Safety and Safety Rehef Valves 

     &tj.rt,.cct:redBy       Crosbv Valve & Gace Company,                  43 Kendrick St.,          Wrentham.         Mass. 02093 6116 lIB-BP-86                       Name and Address I

woJel No. N-56925 Order No. N-300560 Contract Date 2/12/73 Duke Power Company

2. .ar.ufactured For Charlotte, 'North Crolina Order No. A-33957 Name and Address
 ,q.owner         Duke Power Cempany,             422 South Church St..              ,Charlotte,        North Carolina           28201 Name and Address 4..Location of Plant         McGuire Nuclear Station Unit #1. Cowans Ford.                             North Carolina
5. Valve Identification I-NC-3 Serial No. N56925-00-0003 Drawing No. DS-C-56925 Rev. 0 2.154 6

Type Safety Orifice Size i Pip Size ___ lIlet -*outlet6 Safety.Safety Rehef. Pilot. Power Actuated Inch Inch Inch In, h

o. Set Pressure (PSIc). 24R5# 700 F Rated Temp;.era*ure Stamped Capacity 420006i'1/hr. 3 r Overl)ressure 3_iicowdown W'SIG, 124 ilydrostatic Test (PSIG) Inlet LS79 Complete Valve 750
7. The material, design. construction and workmanship comply with ASME Code. Sectiot: IIl.

Class

  • I Edition 1971 Addenda Date Winter 1972 Pressure Containing or Pressure Retaining Components Serial No. Material Specification
a. Castings Identification Including Type or Grade ASTM A-351-72 Gr. CF81,,

Body N90397-31-0001. ASME SA-351 Cr. CF8¶.( ASTN A-105-71 Gr. II Bonnet N90353 0014 AS*N* SA-105 Gr. HI

b. Bar Stock and Forgings Support Rods Nozzle Mi03909 iQ0,%

Disc Insert To N90V.,-31:-0029 ASTH* A-105-71. Cr. II Spring Washers Bottom N0 0 . AS'rM A-19J-"i0 Cr. B6 Adjusting Bolt N90351 0042 AS11b Sh-193 Cr. !P6 __ Spindle N90354-34-0019 ASTI4 A-276-72 Typc -1440 Spindle Ball N90355-0019 ASNi"1 SA-276 Tvpt' 440

C Serial No. or Material Specification Identification Includir. Typ or Grade WCX-2761-0015 AS.1. A-304 Cr. 51":-1i I ,. 0:t pitts sJch as Pilot Components pisc l!older l90356-35-0016 Inconel 718 AST.M A-7i (r. 8/ Bonn:iet Stud 87589 AS,. SA-193 K,:r. 37 ASTMI. A-194-71 Gc..2d Bonn.et Stud Nut 2371 ASrE SA-]94 (:r : We certify thet the statements made in this report are correct. g D.rte I-.-19 7 Signed Crosby Valve & CaPe Co. Manufacturer QA Manager Certificate of Authorization No. 331 expires ._gpvember'9 1974. DESIGN IFTOP2MATION ON FILE AT CROSBY VALVE & GAGE CO.VAN'Y. DESIGN REPORT NO. EC-158. CER'17FICATE OF SHOP INSPECTIOh. I. the undersigned. holding x, r-alid commission issued by the National Board of Boiler api. Pre6ssue Vesstl Inspectors ar.- the State or province of S S. and e.hioyed by Mutual Boiler & ;!ach!in-erv insurance Co."-.'-' Lhw. hasve inspected the equipment descriled in this Data Report on 19- and state that to the best of my kncwledge and belief, the m.anufacturer ha.s constructed this equipi ment in accordance with the ap.:icable Subsections of AS*E Section Ill. By signing this certificate. sne-atiher the Inspector nor h-s employer inakes any w:r"nt'. ex.* pressed or implied. concerningu :he equipment .descritbed in this Data Report.Fur'.h:er;::ore. neithe: the lnspe.ctor nor his employer shall be liable in any mariner for any.personal injury o, prupefty. 1. damage or a loss of any kind a-r-ising frcin or connected with thGis inslpecton.i. Date "/j'_19 __ _ 

                                                        *Factory Hutual Croup of Insurance Co.

7 1/ V 

                            - L '-
                         "(Inspector                       Comrmissions   ,Natminal r    ,). o.,.       pmo:rcr o           :,r    .

qN,, .. ,----4 DUKE POWER COMPANY DESIGN ENGINEERING DEPARTMENT VENDOR QUALITY ASSURANCE CERTIFICATION Name Of Vendor Crosby V,lve & (.7 Comp.*ny Item No. Address of Vendor Plant Wrnntham, N . 09?0g3 Spec. No.-CS-1205.O9 Rev. Component(s) or Material Steel Snfety Valvp Z ate 12!1A/75 

                                                                     *Shippinq      ID No.

Release No. 1JA 

                                                                                            *!   /,-.           , ,

Mill Power Order No. A-33957 Certification Included Yes Full X "Partial The following listed tests and inspections have been completed as required by specification: (If partial certification, list materials or components for which certification applies.)

1) Tested in accordance with rr-ngl-h)y Prce.dure T-l*A(S-0 2)

Physical and. Chemical Analysis V Major Repair Records and Chart Design Report Repair NDT Stress Report Hydro (Test Press.-PSIG ) Heat Treatment Cleanliness, Radiographic Test x Operating Test Ultrasonic Test x Performance Curve 

                                                                                                           -1LA X

Magnetic Particle x ASME Data Report X. Penetrant Tests Personnel Qualifications on Record Deviation Record None 

    .The following QA Docurmentatio-, as recu;,-ed by the specification is attached to' the original copy of this For-cm:        (if   partial certification, include documenta-tion applicable only to this specific shipi.ert.)

Valve Document.;tiorn Pack.-ie Rev. 1 (Cant ;nued,' Form 930.1 Form 930. I (Cont;nued! Rev'. I

DUKE POWER COrIPANY DESIGN ENGINEERING DEPARTMENT VENDOR QUALITY ASSURANCE CERTIFICATION' The listed component(s) or material(s) conform to the requirements of Duke Power Company SpecificationIwith t.jcS-1205.O9 Pev. i the approved deviations noted above. The 0A documentation has been completed and attached to this form. No later than componen t or material shipment, the comolete QA documentation packet is being :ranrsmicred to Duke Power Ccmjany S. K. Blackley, Jr., Chief Engineer, Mechanical & Nuclear Division C. J. Wylie., Chief Engineer, Electrical Division L. C. Dail, Chief Engineer, Civil &Environmental Division Design Engineering Departrment P. 0. Box 2178 Charlotte, N. C. 28242"- A copy of this coV-e '.'!n~C:- 2 Qual' t. ..surance Certificatvo;-. forn wi1 be included with shipping papers- and shipped with the component to Duke Power CoMpany, at the address des ignated ia the sDec, fication. This is to certify that the item of equ;pmer.t identified above fully meets the requirenents of the above listed specification- inc.luding all of the codes, standards, test requirements, and quality assurance reouirenients invoked therein. a TitlIe ate Z -Form 930.1 Rev. i

FORM NIS-2 OWNER'S REPO[-, . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Comoany la. Date April 5. 2008 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road., Huntersville, NC 28078 2a. Unit: 01 E32 03 EJShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1719700-25 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: -NC - Reactor Coolant 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or noi A El Repaired, 0 No 2MCR-NC-4034 Duke Power N/A N/A N/A N/A 0 Replaced, I 1 [20Replacement El Yes B El Repaired, El No 0] Replaced, __ Replacement 0l Yes C El Repaired, 0l No 0l Replaced, 0_ Replacement El Yes D 0l Repaired, El No El Replaced, __ Replacement 0l Yes E E Repaired, El No 0l Replaced, 0_ Replacement 0l Yes F E Repaired, El No 0l Replaced, 0_ Replacement [] Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced load pin.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptl-1 Pressure _psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A. Certificate of Authorization No. N/A Expiration Date N/A Signed -.. FL Grass JrQA Tech Specialist Date I-S-1'-'w_ 

                      "Ownerpf Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 7 o6         to '-<-.OP; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj ry or property damage or a loss of any kind arising from or connected with this inspector./ erome F Swan Commissions NC1524, N-I Inspector' Snature ' National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPOR. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferr' Road. Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1722213 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/.AA Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2NC-VA-2 Crosby N56925-00-0007 523 N/A 1978 01 Replaced, [0 Replacement 01 Yes B 0 Repaired, 0 No 2NC-VA-2 Crosby N56925-00-0007 523 N/A 1978 0 Replaced, 1214Replacement 20 Yes C 0 Repaired, 0 No 0 Replaced, O Replacement 0 Yes D 0 Repaired, 0 No O Replaced, [O Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve.
8. Tests Conducted:Hydrostatic El Pneumatic [] Nom. Operating Press. 19 Other 0 Exempt[]

Pressure 2235 psig Test Temp. 558 OF Pressure psig Test Temp. OF Pressure _ psig Test Temp. OF

9. Remarks Valve removed from system sent to vendor to be tested and place back in original position for service. The functional test was performed per task 4.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date -17 ,9,8 Owner ef Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected theyomponents described in this Owners Report during the period I R to Y-/ Y- d2; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this Sinspection../*- 

                                 . /J erome F Swan         Commissions         NC1524, N-I ns~pec~tor's-"Tg0ture   -National                               Board, State, Province and Endorsements Dateq-q Page 2 of 2

(. VCROSBY CROSBY VALVE W R ENNTH AM l GAGE M A SS CO M PANY FORM NV-1 FOR SAFETY AND SAFETY RELIEF VALVES AQ.C..4-4C As required by the provisions of the ASME Code Rules DATA REPORT Safety and Safety Relief Valves I. Manufactured By Crosby Valve & Gage Co., 43 Kendrick St., Wrentham, MA 02093 Name and Address 86 Contract Date 3/25/76National Board No. w.23 Model NO. HB- -Urder No 300580J

2. Manufactured For Duke Power Co., Charlotte, No. Carolina Order No. A33957 Name and Address s.Owner Duke Power Co., 422 "South Church St., Charlotte, North Carolina 28201 Name and Address
4. Location of plant McGuire Nuclear Station Unit, Cowans Ford, North Carolina 92 7
5. Valve Identification SPARE - 1 Serial N0.N+S 65.'S00000 Drawing No. DS-C-56925 Rev. C Type Safety Orifice Size I M pipe Size Inlet 6 Outlet 6 Safety.Safety Relief.Pilot. Power Actuated Inch Inch Inch Inch
6. Set Pressure (PSIG) 2485 700 F Rated Temperature Stamped Capacity 420006 lbs./hr. Sat. t 3 _Overpressure- Blowdown z S* of ' .. P.

Hiydrostatic Test IPSIG) Inlet 4575 Complete Valve 750 psig

7. The material, design, construction and workmanship comply with ASME Code. Section Ill.

Class 1 Edition 1971 Addenda Date Winter 1972 Case No. Pressure Containing or Pressure Retaining Components Serial No. Material Specification

a. Castings Identification Incl uding Type or Grade Body N90397-33-0007 ASME SA3 51 Gr. CF8H Bonnet N90353-41-0113 ASME SAI 05
b. Bir Stock and Forgings 1ellot1z K56383-40-0036 N90356-40-0040 Inconel Alloy 718 Nozzle N90399-35-0011 ASNE SA182 Gr. F316 Disc Insert N90426-37-0026 Haynes Stellite Alloy No. 6B N90350-LO-0226 Spring WashersK56380-45-0110 X90350-40-0237 AS'W SA1_5_ ___

ASTM A193-70 Cr. B6 Adjusting Bolt N90151-44-0145: ASIrE SA193 Gr. B6 ASTI A193-73 Cr. B6 Spindle K56381-49-0143 .N90354-47-0141 ASE SA193 Qr, 36

V IL1 Serial NO. or Material Specification Identification Including Type or Grade

c. Spring K56380-45-0110 NX2761-0023 AST1X A304-76 _51B60H-
d. Bolting
e. Other parts such as Pilot Components Bonnet Stud 87589 ASTM A193 dr. B7 Bonnet Nut 2371 ASTM A197 CL. 24 We certify that the statements made in this report are correct.

Date 3 7 19 *6 Signed Crosby Valve & Gage Co. ByII ý Manufacturer Certificate of Authorization no. 1 87R expires September 30. 1980 CERTIFICATE OF SHOP INSPECTION I. the undersigned. holding a valid commission issued by the qa .oVnal Board of Boiler and Pressure Factory Vessei Inspectors Mutual and .he State or ProvinceMpcs.,-/"*e of Mass. and emploved by Systems*. -"o;on*od. inspected the equipment described in this Data Report on , ,and state that to the best of my knowledge and belief, the Manufacturer r/s constructed this equip-ment in accordance with the applicable Subsections of ASME Section Ill. By signing this certificate, neither the Inspector nor his employer makes any warranty. ex-pressed or implied. concerning zhe equipment described in this Data Report.Furthermore. neither the Inspector nor his employer shall be Ihahle in any manner for any personal injury or property damage or a loss of ainy kli i -sng frn or connected with this inspection. Date 2 /.10 (rnspeCtc ri '- N 1 rd. Slatw. 

                                                                               -1'lor.'.i         Pr'   ,- .   ....
            *Arkwright-Boston M!anufacturers Mutual Insurance Company - Mutual Boiler & Machinery Division.

1~~ \~JV

DUKE POWER COMPANY QUALITY ASSURANCE DEPARTMENT SUPPLIER QUALITY ASSURANCE CERTIFICATION Name of Supplier Crosby Valve & Gage Company Date March 14, 1978 Address of Supplier Plant 43 Kendrick Street Mill Power Order No. A-33957 Wrentham, Mass, 02093 Duke Item or Req. No. Item 1 Spec. No. MCS-1205 .09-I Rev. I Supplier ID Nos. N56925-00-0007, N56925-00-00081 N56925-00-0009 Description of Component(s) or Material(s) Steel Safety Valves X Attached Documentation covers all Components/Materials on Mill Power Order. Attached Documentation covers partial shipment of Components/Materials on Mill Power Order. The following listed tests, inspections and reports have been completed as required by the specification: X Physical & Chemical Analysis X Major Repair Records & Charts X Hydro' (Test Pressure - PSIG 2485) X Personnel Qualifications on Record

  • Crosby No. EC-158 & EC-427 X* Design Report NLA Stress Report Heat Treatment Radiographic Test X Ultrasonic Test X Magnetic Particle.

X Penetrant Test Repair NDE X Cleanliness Performance Curve _ ASME Data Report _X Operating Test X Dimensional Check N___ Deviation Record #

1) Tested in accordance with Crosby Procedure T-16063 Rev- n 2) 3)

This certifies that the listed Component(s) or Material(s) conform to the requirements of the above referenced Duke Power documents including all codes, standards, test requirements and Quality Assurance requirements invoked therein. Supplier RepresentatA Authorit Signature Title Q. A. Supervisor Date ,L/,/97, (See Instructions) Form 930.IA/ Rev. 3

FORM NIS-2 OWNER'S REPO, . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 16, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745170 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed _ yes or no) A El Repaired, 0 No 2MCA-CA-59 Duke Power 18063 N/A N/A N/A 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes B                                                                                                                                              03 Repaired,                  0 No 2MCA-CA-59                  Duke Power                   36863                       N/A                   N/A               N/A      01 Replaced, 0  Replacement                0 Yes C                                                                                                                                              C  Repaired,                  0 No 01 Replaced,

[0 Replacement C Yes D 0 Repaired, 0 No 0 Replaced, [O Replacement 0 Yes E 0 Repaired, C No O Replaced, 

                                                                                                                                              ]0 Replacement                [ Yes F                                                                                                                                              0  Repaired,                  C No C  Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber and bolting material on extension piece.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptOl Pressure _psig Test Temp. 0F Pressure psig Test Temp. OF Pressure _psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed ' ( FL Grass JrQA Tech Specialist Ownerof OwCner's Designee, Title Date .3 4- , CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Al!"5ýa to_], -t -jI and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. rome F Swan Commissions NC1524, N-I Inspector's S51Kture National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPOi -'OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date March 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville. NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745171 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/.A Expiration Date: N/A N/A 3b. NSM or MM #:

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, 0 No 2MCA-CA-1 30 Duke Power 20494 N/A N/A N/A 0 Replaced, B 

                                                                                                                                        .... _ _ Replacement                 El Yes El Repaired,                  0 NO 2MCA-CA-130                 Duke Power                   36861                       N/A                    N/A               N/A       El Replaced,

[0 Replacement 0l Yes C El Repaired, El No O Replaced, [O Replacement 0l Yes D 0] Repaired, El No 0l Replaced, 0] Replacement 0l Yes E [] Repaired, El No [] Replaced, 0l Replacement El Yes F 0 Repaired, El No 0 Replaced, _E Replacement [] Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic [l Pneumatic LI Nom. Operating Press. El Other LI Exemptl-Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. -OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)
                                          , CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI.

Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date -0 / Owner 6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 0c Y to-.. 1_-/  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection 

                        --               rome F Swan        Commissions           NC1524, N-I Inspector's 8ig- 9ture                                     National Board, State, Province and Endorsements C     Date                :_Zoo Page 2 of 2

FORM NIS-2 OWNER'S REPOR OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Companv la. Date March 10, 2008 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 103 EZShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745172 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No, Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0] Repaired, E1 No 2MCA-CA-130 Duke Power 21774 N/A N/A N/A 01 Replaced, B [0 Replacement 01 Yes 0 Repaired, 01 No 2MCA-CA-1 30 Duke Power 36862 N/A N/A N/A 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                            ]0 Replacement                0   Yes E                                                                                                                                            0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes F                                                                                                                                            0  Repaired,                  0 No 0  Replaced,
                                                                                                                                            ]0 Replacement                0   Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptl@

Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -2 - F! (r~ .lrOA Tech ~n~i~li~t Date =5 1 '- _42_ 

                                      .. Grs .... OA TechSpecalis
                       " Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the gmponents described in this Owner's Report during the period a - I/_ Q& to -3__/ -06and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. I o.~me F Swan Commissions NC1524, N-I 

       , Inspector's 81gfature                                            National Board, State, Province and Endorsements l      Date-3    4I/OV Page 2 of 2

FORM NIS-2 OWNER'S REPORF . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 []Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 1745174 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built corrected, Removed, or ASME Code Stamped 

                                                                                                                                   .                  Installed                 (yes or no)

A El Repaired, 0 No 2MCA-ND-6380 Duke Power 21755 N/A N/A N/A 0 Replaced, B 

                                                                                                 .. __0                                           Replacement               El Yes 0l Repaired,                  01 No 2MCA-ND-6380                    Duke Power                  14908                      N/A                   N/A                N/A     0l Replaced,
                                             .. __-'_                                                                                            Replacement               0] Yes C                                                                                                                                              El  Repaired,                 El No 0l  Replaced, El  Replacement               El Yes D                                                                                                                                              El  Repaired,                 El No El  Replaced, El  Replacement               0l Yes E                                                                                                                                              E   Repaired,                 El No El  Replaced, 0l  Replacement               El Yes F                                                                                                                                              E   Repaired,                 El No El  Replaced, 0E Replacement                0l Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Reolaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptOl Pressure .psig Test Temp. _ OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \.-- A,*" FL Grass JrQA Tech Specialist Date Owner of'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period __-_-_-___ T*to 3 °-/o'- CA; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this iinspection. me F Swan Commissions NC1524, N-I Inspector' i ature National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPOR., -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date March 24, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 E02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order#: 1745175 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair I Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name ot Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                                         ....             _  _Installed                                                                                          (yes or no)

A 0 Repaired, 0 No 2MCA-NV-7009 Duke Power 20489 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 2MCA-NV-7009 Duke Power 36859 N/A N/A N/A 0 Replaced, 

                                                                                                                                               ]0 Replacement                0   Yes C                                                                                                                                               0 Repaired,                   0 No 01 Replaced,

[0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0OReplacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. LI Other LI Exempt@]

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -J -,4 FL Grass Jr.QA Tech Specialist Date .65-_s Owner,dr Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of -North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

           -t -,to-.3-           ,*2,.,O'and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, .Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. me F Swan Commissions NC1524, N-I Inspector's igna/ure National Board, State, Province and Endorsements Date ~ cc Page 2 of 2

FORM NIS-2 OWNER'S REPOi .:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 10. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 1212 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1745177 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job i Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # N/A
4. (a) Identification of System: SV - Main Steam Vent to Asmosphere 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-SV-58 Duke Power 100 N/A N/A N/A 0 Replaced, 

                                                                                                                                             ]0 Replacement                 [l Yes B                                                                                                                                             0 Repaired,                   0 No 2MCA-SV-58                 Duke Power                   36858                       N/A                   N/A               N/A      0  Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0    Yes D                                                                                                                                             0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes

[0 Repaired, 0 No 0 Replaced, 0 Replacement E0 Yes F 0 Repaired, 0l No 0 Replaced, 0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exempt0 Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed "V

  • FL Grass Jr,QA Tech Specialist Date ,Z4F.,',

Owner 6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 1,.- I q -0to -.- _L -z ,. and state that to the best of my knowledge and belief, the Owner has pedormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. I 

                                   -     rome F Swan       Commissions          NC1524, N-I Inspector's 9igr ture                                    National Board, State, Province and Endorsements Date Page 2 of 2

FORM NIS-2 OWNER'S REPOR. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XA

1. Owner Address: Duke Power Company la. Date March 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 031 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 1745179 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: CA -Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 03 Repaired, 0 No 2MCA-CA-140 Duke Power 20372 N/A N/A N/A R1 Replaced, 

                                                                                                                        ,.                   ]0   Replacement              0 Yes B                                                                                                                                             0    Repaired,                0 No 2MCA-CA-1 40                 Duke Power                    19547                      N/A                  N/A               N/A      0    Replaced, 2-[] Replacement              0   Yes C                                                                                                                                             0    Repaired,                0 No 0    Replaced,

[] Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0   Replacement              0 Yes E                                                                                                                                             0    Repaired,                0 No 0    Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic E- Pneumatic El Nom. Operating Press. [] Other El ExemptlO Pressure -- psig Test Temp. OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed e ',,* FL Grass Jr,QA Tech Specialist Date - oo7 Owner orlOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period X-1._ e to I- 

                                 ,-[        ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for nyspection. personal inju

  • or property damage or a loss of any kind arising from or connected with this erome F Swan Commissions NC1524, N-I pector's Si-ature National Board, State, Province and Endorsements Dte _ -[ - ._

( Page 2 of 2

FORM NIS-2 OWNER'S REPOR, OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 17. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 22 033 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745181 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for. Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-ND-5508 Duke Power 14936 N/A N/A N/A 0 Replaced, B I-C Replacement 03 Yes 0 Repaired, 0 No 2MCA-ND-5508 Duke Power 36855 N/A N/A N/A 0 Replaced, 0 Replacement 0I Yes C 0 Repaired, 0] No 0I Replaced, D [0 Replacement 01 Yes 0 Repaired, 0 No 0 Replaced, [0 Replacement C0 Yes E 0 Repaired, 03 No 0 Replaced, 0 Replacement 0 Yes F 01 Repaired, 0 No 0I Replaced, [0 Replacement 01 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic 0 Pneumatic El Nom. Operating Press. El Other E] ExemptOl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp.. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi. Type Code-Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed *A FL Grass JrQA Tech Soecialist Date 4 4/4L5. 8 Owne('or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Z/Ly/- OK to "/JL- 12 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this heinspection. A Jerome F Swan Commissions NC1524. N-I Inseors Siature I National Board, State, Province and Endorsements Date . - 1 , 7 D Page 2 of 2

FORM NIS-2 OWNER'S REPOR, . JR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 25, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 E02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745182 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 02 No 2MCR-NI-4699 Duke Power 20732 N/A N/A N/A 0 Replaced, [0 Replacement_ 0 Yes B 0 Repaired, 0 No 2MCR-NI-4699 Duke Power 16569 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, O Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                 0  Yes F                                                                                                                                             0  Repaired,                   0  No 0  Replaced, 10  Replacement 10                 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic 0] Nom. Operating Press. El Other [0 Exempt--

Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -& FL Grass Jr,QA Tech Specialist Date ,,_, 

                       '"   ner, 'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected thA components described in this Owner's Report during the period a_ I Y_ C toz, Z - ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injur or property damage or a loss of any kind arising from or connected with this 

                           -,-).--'A. erome F Swan           Commissions         NC1524, N-I
        /Inspec~tor'figfnature   -National                                Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPOI-. :OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 9. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville,. NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745184 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SV- Main Steam Vent to Asmosphere 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                                                                .  . .. . ..                                           _In            st alle d                (ye s o r n o)

A 0 Repaired, 0 No 2MCA-SV-1 Duke Power 173 N/A N/A N/A 0 Replaced, B 

                                                                                                                                             ]0 Replacement                0   Yes

[0 Repaired, 2 No 2MCA-SV-1 Duke Power 36853 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, D [0 Replacement 0 Yes 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes E                                                                                                                                             0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes F                                                                                                                                             0  Repaired,                  0 No 0  Replaced,
                                                                                                                                             ]0 Replacement                0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptlZ Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/AA Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date ý5 , 7 Owner oF Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT haye ins ected the components described in this Owner's Report during the period 

        "?,-21       L toQ.- L-/c'D      ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for 

      ) any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

9,PL _--*-'Ae F Swan Commissions NC1524, N-I Inspectors Sigrture National Board, State, Province and Endorsements ( Date ~L*j.O~ Page 2 of 2

FORM NIS-2 OWNER'S REPOR. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OIShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745185 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/.A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCR-NI-4026 Duke Power 20558 N/A N/A N/A R0 Replaced, [0 Replacement 0 Yes B 0 Repaired, EI No 2MCR-NI-4026 Duke Power 36852 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes D                                                                                                                                            0  Repaired,                  0 No 0  Replaced,
                                                                                                                                             ]0  Replacement               0 Yes E                                                                                                                                            0  Repaired,                  0 No 0   Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 01 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other [] Exemptl-1 Pressure .psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date _,s Ownerv)wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the Undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

       *.._/9./- 6I* to. -./',*-        °: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. e..f ,.-A-Jerome F Swan Commissions NC1524, N-I or's tature SIwannspect National Board, State, Province and Endorsements Date -Ay -_ Page 2 of 2

FORM NIS-2 OWNER'S REPOt .:OR REPAIR / REPLACEMENT ACTIVITY. As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: -1 102 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1745187 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME Il1 1971 Edition, Summer and Winter Addenda, N/A (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class Code Cases MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                                                                                                    .. _ _Installed                                              (yes or no)

A El Repaired, 0 No 2MCA-SM-1 52 Duke Power 22396 N/A N/A N/A 0 Replaced, __ Replacement 0l Yes B 0l Repaired, 0 No 2MCA-SM-152 Duke Power 15712 N/A N/A N/A El Replaced, C [0 Replacement El Yes El Repaired, 0l No 0 Replaced, 0O Replacement r- Yes D El Repaired, El No 0 Replaced, E _E Replacement El Yes 0 Repaired, El No 0l Replaced, El Replacement El Yes F El Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. [1 Other LI ExemptlZ Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date 3 Owner Qf Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period R to." - I I - Ot ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Y-P*- Jerome F Swan Commissions NC1524, N-I Inspector's Sign re National Board, State, Province and Endorsements C Date.- / Z-00 Page 2 of 2

FORM NIS-2 OWNER'S REPOi :OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 011 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745189 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) -A 0l Repaired, 0 No 2MCA-CA-89 Duke Power 20977 N/A N/A N/A 0 Replaced, 

                                                                                                                                               ]0 Replacement                0l  Yes B                                                                                                                                                 Repaired, 0l                            01 No 2MCA-CA-89                Duke Power                    36851                       N/A                   N/A               N/A      El Replaced, 20 Replacement                [I Yes C                                                                                                                                              0 Repaired,                   El No 0 Replaced, O Replacement                 El Yes D                                                                                                                                              0l 0l Repaired, Replaced,                  El No 0_ Replacement                El  Yes E                                                                                                                                              El Repaired,                  C1 No O Replaced, El Replacement                El Yes F                                                                                                                                              El Repaired,                  El No El Replaced, 0E Replacement                El Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each-sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exempt@-i Pressure psig Test Temp. _ OF Pressure .psig Test Temp. _ OF Pressure psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date . ,* - 211-8 Ownewpor Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

           'T-           " to_._3-//- 00;:and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this f) inspection. I,,iJerome FSwan Commissions NC1 524. N-I 

    /          -lnspectorsSigfiature                               National Board, State, Province and Endorsements 6      Date     -  I'U Page 2 of 2

FORM NIS-2 OWNER'S REPOR. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 212 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745190 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 01 No 2MCR-NI-4556 Duke Power 21122 N/A N/A N/A 0Z Replaced, [0 Replacement 0 Yes B 0 Repaired, 21 No 2MCR-NI-4556 Duke Power 36850 N/A N/A N/A 0 Replaced, [] Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0  Replacement               0 Yes D                                                                                                                                              0   Repaired,                 0 No 0  Replaced, 0  Replacement               0 Yes E                                                                                                                                               0  Repaired,                 0 No 0  Replaced,
                                                                                                                                                ]0 Replacement               0]  Yes F                                                                                                                                               0  Repaired,                 0 No 0  Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Replaced snubber.
8. Tests Conducted:Hydrostatic I] Pneumatic E Nom. Operating Press. LI Other LI Exemptl-Pressure psig Test Temp. OF Pressure _psig Test Temp. _ OF Pressure psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A 

       *Signed                        FL Grass Jr,QA Tech Specialist           Date      .- i7
  • Owner qOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period iLZ-8 to Y; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this iinspection. rome F Swan Commissions NC1524, N-I SInspector's Prg~ature National Board, State, Province and Endorsements C SDat~e,,3-- g . Page 2 of 2

FORM NIS-2 OWNER'S REPOF,. .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date March 25, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1745191 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Name of Component Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A .l Repaired, RI No 2MCR-NI-4043 Duke Power 21752 N/A N/A N/A 0 Replaced, __ Replacement [] Yes B El Repaired, 01 No 2MCR-NI-4043 Duke Power 14765 N/A N/A N/A [E Replaced, [0 Replacement 0l Yes C 0l Repaired, El No El Replaced, o Replacement El Yes D 0l Repaired, El No El Replaced, El Replacement El Yes E El Repaired, El No El Replaced, __ Replacement El Yes F El Repaired, El No El Replaced, __ Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber and 3/8" bolt at bracket.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. LI Other LI Exempt(]

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signe d '45t FL Grass Jr,QA Tech Specialist Date __ r Owner orOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

              '          to_7 -;.lo-oY and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. me F Swan Commissions NC1524, N-I lnspector's"5-gture National Board, State, Province and Endorsements 6 Date - ,-. Co Page 2 of 2

FORM NIS-2 OWNER'S REPOk. (-OR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of. The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haoers Fern, Road. Huntersville. NC 28078 2a. Unit: 01 02 033 -IOShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #- 1745192 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:- N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME .1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 01 No 2MCR-NI-4716 Duke Power 20742 N/A N/A N/A 01 Replaced, o Replacement 0 Yes B 0 Repaired, 10 No 2MCR-NI-4716 Duke Power 36848 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. Li Other El Exempt0 Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be. attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed A FL Grass Jr,QA Tech Specialist Date , //141.,*_..._ Owner,6r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period A q-N- Q& to -2, -jIc- 0and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his 'mployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this () inspection. 

                    ./i/6'
  • erome F Swan Commissions NC1524, N-I S nature National Board, State, Province and Endorsements 6 PLInspector Date-s -t 0 c Page 2 of 2

FORM NIS-2 OWNER'S REPOi. (-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X(

1. Owner Address: Duke Power Company la. Date March 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units .)
3. Work Performed By: Duke Power Company 3a. Work Order#: 1745194 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. 1N/A Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Name of Component Column 7 Column 8 Name of Mfg Mfg Seral No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, [] No 2MCA-NI-4722 Duke Power 118 N/A N/A N/A 0 Replaced, 

                                                                                                                                                ]0 Replacement               0 Yes B                                                                                                                                                0  Repaired,                 0 No 2MCA-NI-4722                Duke Power                     36847                        N/A                   N/A             -  N/A     0  Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement [0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                ]0 Replacement               0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber,
8. Tests Conducted:Hydrostatic 0l Pneumatic El Nom. Operating Press. El Other El ExemptO Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed v.", FL Grass Jr,QA Tech Specialist Date a * 

                       ' Owvner or-Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and'the State or Province of North Carolina and employed by HSB CT have inspected th components described in this Owner's Report during the period OK to-.--//- 0 9; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                         - ,           Ierome F Swan         Commissions          NC1524, N-I nspector**   0/ ature                                     National Board, State, Province and Endorsements Date-3j                OQ Page 2 of 2

FORM NIS-2 OWNER'S REPO ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1 1, Owner Address: Duke Power Company la. Date March 10. 2008. 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 031 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 1745195 3a. Work Order #:

Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job # Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # N/A

4. (a). Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, NI.A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component . . Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, El No 2MCA-CA-56 Duke Power 10734 N/A N/A N/A 0 Replaced, [O Replacement 0 Yes B 0 Repaired, 0] No 2MCA-CA-56 Duke Power 36846 N/A N/A N/A 0 Replaced, 0Z Replacement 0l Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0l No 0 Replaced, 

                                                                                                                                            ]0 Replacement                0 Yes E                                                                                                                                            0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes F                                                                                                                                            0  Repaired,                  0 No 0  Replaced,
                                                                                                                                            ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic 0 Pneumatic [] Nom. Operating Press. 0 Other 11 ExemptlA Pressure .psig Test Temp. _ OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed , FL Grass Jr,QA Tech Specialist Date _- _ Owner or'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected thcomponents described in this Owner's Report during the period 

        ,I9.Z--          to .3-/,/- OW; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section X1.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.. 

             -y'-tt -       t--*-J,*1,'erome F Swan          Commissions          NC1524, N-I Inspector'e'i    ature                                     National Board, State, Province and Endorsements 6      Date-       -//L cQo(!

Page 2 of 2

FORM NIS-2 OWNER'S REPORI r-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl *

1. Owner Address: Duke Power Company 1a. Date March 9, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 0I1 22 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order#: 1745197 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#:- N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code (b) Applicable Edition of Section Xl Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and Cases CC and their Supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, RI No 2MCA-SM-104 Duke Power 197 N/A N/A N/A 0 Replaced, __ Replacement 0l Yes B C Repaired, 0 No 2MCA-SM-104 Duke Power 16035 N/A N/A N/A El Replaced, 

                                                                                                                                               ]0 Replacement                El  Yes C                                                                                                                                               El Repaired,                  El No 0l Replaced,

__ Replacement El Yes D El Repaired, [E No El Replaced, El Replacement El Yes E El Repaired, El No 0l Replaced, El Replacement El Yes F El Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this, form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptl-Pressure psig Test Temp. - OF Pressure psig Test Temp. - F Pressure _psig Test Temp. °F
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date OWner orwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

               - +/-L-- to _ -i/0- 0 8; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. dn erome F Swan Commissions NC1524. N-I lnspector's Signoure National Board, State, Province and Endorsements Date Z/_. 9.__ Q

  • Page 2 of 2

FORM NIS-2 OWNER'S REPORI i-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoany la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry'Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Comrpany 3a. Work Order #: 1745201 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-ND-5880 Duke Power 20667 N/A N/A N/A 0 Replaced, 

                                                                                                                                             ]0 Replacement                 0 Yes B                                                                                                                                            0 Repaired,                    0 No 2MCA-ND-5880                    Duke Power                  36845                     N/A                   N/A               N/A       0 Replaced,
                                                                                               ,                                             [0 Replacement                 0 Yes C                                                                                                                                             0 Repaired,                   0 No 0 Replaced,
                                                                                                                                              ]0 Replacement                0  Yes D                                                                                                                                             0 Repaired,                   0 No 0 Replaced, 0 Replacement                 0 Yes E                                                                                                                                             0 Repaired,                   0 No 0 Replaced,
                                                                                                                                              ]0 Replacement                0  Yes F                                                                                                                                             0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Reolaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exempt[l Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the, statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed i FL Grass Jr,QA Tech Specialist F, Date -__ ___ __ Owvner oeOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province, of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

         .2.Ai/Z *2to-. -l4-0;-             and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinationsand corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this spection" J-erome F Swan Commissions M1524, N-I 

      /Inspector's   Sig/ture                                      National Board, State, Province and Endorsements
    /    Date      -        -'_2>L, Page 2 of 2

FORM NIS-2 OWNER'S REPORI FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoanv la. Date March 17, 2008 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hapers Ferry Road, Huntersviile, NC 28078 2a. Unit: 0' 1-02 03 []Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745202 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: ND - Residual Heat Removal 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, 0 No 2MCA-ND-6181 Duke Power 21917 N/A N/A N/A 0 Replaced, _l Replacement El Yes B0 Repaired, 01 No 2MCA-ND-6181 Duke Power 36844 N/A N/A N/A El Replaced, 01 Replacement 0l Yes C El Repaired, [] No El Replaced, El Replacement El Yes D El Repaired, 0l No El Replaced, __ Replacement El Yes E El Repaired, 0l No El Replaced, 0l Replacement El Yes F El Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. [] Other El Exempt[o Pressure _psig Test Temp. _ OF Pressure _psig Test Temp. OF Pressure _psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed " "- a FL Grass JrQA Tech Specialist Date ._,__- Owner g(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period O 8to_-X ?o and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 7kpiIeerome F Swan Commissions NC1524, N-I Inspector's 'Si9ture National Board, State, Province and Endorsements Date Z Page 2 of 2

FORM NIS-2 OWNER'S REPO,.. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 9. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 0-2 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745204 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/.A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998,. 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built corrected, Removed, or ASME Code Stamped Installed (yes or no) A 03 Repaired, 12 No 2MCA-SM-19. (A) Duke Power 15115 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 2MCA-SM-19 (A) Duke Power 21768 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 2MCA-SM-19 (B) Duke Power 16137 N/A N/A N/A 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 01 No 2MCA-SM-19 (B) Duke Power 17366 N/A N/A N/A 0 Replaced, S] Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement                0   Yes F                                                                                                                                              0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubbers
8. Tests Conducted:Hydrostatic [] Pneumatic [] Nom. Operating Press. El Other LI Exempt@*

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date ___ nWner or wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

            -Lq-V? to             -06; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this inspection. erome F Swan Commissions NC1524, N-I Inspector's Sig a e National Board, State, Province and Endorsements Date-, Page 2 of 2

FORM NIS-2 OWNER'S REPOh, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company 1a. Date March 9, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745205 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/_AA Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1998, 2000 Addenda -(1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built -Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-SM-20 Duke Power 15691 N/A N/A N/A 0I Replaced, [0 Replacement 0 Yes B 0 Repaired,, 0 No 2MCA-SM-20  :'Duke Power 36876 N/A N/A N/A 0 Replaced, 

                                                                                                                                               ]0  Replacement               0 Yes C                                                                                                                                               0 Repaired,                   0 No 0 Replaced,
                                                                                                                                               ]0  Replacement               0   Yes D                                                                                                                                               0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes E0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. [] Other LI Exemptl]

Pressure psig Test Temp. -OF Pressure psig Test Temp. OF Pressure .psig Test Temp. -OF

9. Remarks 111(Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \-.Z* ',FL Grass Jr.QA Tech Specialist Date 1 OWner or wner's Designee, Title 

             /                     CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 02-//- OOto-3.-/Z-a ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for

  • any*inspection.r-personal injury or property damage or a loss of any kind arising from or connected with this Jerome F Swan Commissions NC1524, N-I Inspector's Si ature National Board, State, Province and Endorsements 6 Date 0 3008 Page 2 of 2

FORM NIS-2 OWNER'S REPOr,, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit:. 01 012 103 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745206 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:- N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports) 6.. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 01 No 2MCA-SM-153 Duke Power 21924 N/A N/A N/A 01 Replaced, 0 Replacement 0 Yes B 0 Repaired, 0I No 2MCA-SM-153 Duke Power 15711 N/A N/A N/A 0 Replaced, [] Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0  Replacement               0  Yes D                                                                                                                                            0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement 10                Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic [] Pneumatic El Nom. Operating Press. El Other LI Exempt-Pressure -psig Test Temp. OF Pressure .psig Test Temp. OF OF Pressure .psig Test Temp.
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 4FL Grass JrQA Tech Soecialist Owvnier orowner's Designee, Title Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the omponents described in this Owner's Report during the period 2to -. c and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. rome F Swan Commissions NC1524, N-I Inspector's Sign 9re National Board, State, Province and Endorsements Date *3uI!iZZ7 Page 2 of 2

FORM NIS-2 OWNER'S REPOr-. ..OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 25, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 E12 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745207 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                                                                  ,,_                _Installed                                                               - Iyes or no)

A 0l Repaired, 0 No 2MCR-NI-4661 Duke Power 18852 N/A N/A N/A 0 Replaced, 

                                                                                                                                                ]0 Replacement                0  Yes B                                                                                                                                                0 Repaired,                   0l No 2MCR-NI-4661                 Duke Power                    36875                      N/A                     N/A               N/A      0  Replaced, R0 Replacement                0 Yes C                                                                                                                                               0  Repaired,                  0 No 0  Replaced,
                                                                                                                                                ]0 Replacement                0 Yes D                                                                                                                                               0  Repaired,                  0 No 0   Replaced,
                                                                                                                                                ]0 Replacement                0 Yes E                                                                                                                                               0   Repaired,                 0 No 0   Replaced, 0   Replacement               0 Yes F                                                                                                                                              0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other [] ExemptZ Pressure _psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed_,-7, t -a FL Grass Jr,QA Tech Specialist Date c2*/2 --W 4 e 

                     ,   Owvner peOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period d-fij .-   o       to-3--Y- V3'; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection. JY ome F Swan Commissions NC1524, N-I lnspector'sA*nature National Board, State, Province and Endorsements ( Datal29-3 -dZ Page 2 of 2

FORM NIS-2 OWNER'S REPO. . FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 25. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745208 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: SM- Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, IZ No 2MCA-SM-74 Duke Power 21930 N/A N/A N/A 0 Replaced, O Replacement El Yes B 0 Repaired, EI No 2MCA-SM-74 Duke Power 22392 N/A N/A N/A El Replaced, __ Replacement 0 Yes C 0 Repaired, 0 No O Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0l Replaced, [0 Replacement 0 Yes E 0 Repaired, El No 0 Replaced, 0 Replacement 0 Yes F E Repaired, rl No 0 Replaced, 

                                                                                                                                            ]0 Replacement               0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic E] Nom. Operating Press. [i Other 0] Exemptl]

Pressure psig Test Temp. _ OF Pressure _psig Test Temp. OF Pressure psig Test Temp. _ OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed ,7_- 

                   \                   FL Grass JrQA Tech Specialist              Date        *.*
                     "Owner    boOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have ins ected the components described in this Owner's Report during the period
       -7                to -Z-Od-            and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this inspection. / 

                          -,        A--r.-Jerome F Swan       Commissions            NC1524, N-I inspector's dgrature                                         National Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPORi FrOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date March 10, 2008 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: .1 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745209 Address: 526 S. Church Street, Charlotte NC 28201-1006 . Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:- N/A

4. (a) Identification of System: SM - Main Steam 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Name of Component Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, -I No 2MCA-SM-283 Duke Power 17331 N/A N/A N/A 0 Replaced, B 1 0 Replacement El Yes E Repaired, 0I No 2MCA-SM-283 Duke Power 36631 N/A N/A N/A El Replaced, C [0 Replacement El Yes 

                                                                                                                                  -            El Repaired,                   [] No E   Replaced, El  Replacement                El Yes D                                                                                                                                               El  Repaired,                  El No El  Replaced, E

_E Replacement El Yes El Repaired, El No El Replaced, F 0E Replacement El Yes E Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic [i Nom. Operating Press. [] Other LI ExemptL-Pressure psig Test Temp. OF Pressure psig Test Temp. -OF Pressure psig Test Temp. -OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed y FL Grass JrQA Tech Specialist Date _- _ Owner orowner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSBCThae inspected the components described in this Owner's Report during the period z2_ýL-to 6R; and state that to the best of my. knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements'of ASME.Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this wan Commissions NC1524, N-I 

        -Inspector's Sign    e  -National                                 Board, State, Province and Endorsements

( SDateec-'[ , l Page 2 of 2

FORM NIS-2 OWNER'S REPOh I FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date March 28, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 12 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745285 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NS - Containment Spray 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped installed (yes or no) A 0l Repaired, 01 No NS Piping Duke Power N/A 69 N/A 1982 0 Replaced, 

                                                                                                                                               ]0 Replacement                0 Yes B                                                                                                                                             0   Repaired,                  0 No
                                                                                                                                              .0  Replaced,
                                                                                                                                               ]0 Replacement                0 Yes C                                                                                                                                              0  Repaired,                  0 No 0  Replaced, C  Replacement                0 Yes D                                                                                                                                              0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes E                                                                                                                                              C  Repaired,                  0 No 0  Replaced,

[0 Replacement C Yes F 0 Repaired, C No 0 Replaced, __ Replacement C Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material (studs and nuts) at the inlet and outlet flange at valve 2NS2.
8. Tests Conducted:Hydrostatic fl Pneumatic 0 Nom. Operating Press. fZ Other LI Exempt*

Pressure psig Test Temp. OF Pressure psig Test Temp. _ IF Pressure psig Test Temp. OF

9. Remarks Functional performed per task 5.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed --- /'7* FL Grass Jr,QA Tech Specialist Date 

                        -Ownerorewner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT hap inspected thgcomponents described in this Owner's Report during the period
        - -21 to                 -5         and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. o ~k~/j- t-,cJerome F Swan -Commissions NC1524. N-I Inspector's t ure National Board, State, Province and Endorsements Date !.- ccc. g Page 2 of 2

FORM NIS-2 OWNER'S REPOh. rOR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 3, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1747839 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: BB - Steam Generator Blowdown Recycle 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0l No 2MCA-BB-5489 Duke Power N/A N/A N/A N/A 0 Replaced, B [0 Replacement 0 Yes 0 Repaired, 0 No 0 Replaced, C [0 Replacement El Yes 0 Repaired, 0 No O Replaced, [0 Replacement 0 Yes D [0 Repaired, 0 No O Replaced, [o Replacement 0l Yes E 0 Repaired, 0 No 0 Replaced, F [0 Replacement El Yes 0 Repaired, El No O Replaced, 0] Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced material per MD20176.
8. Tests Conducted:Hydrostatic E] Pneumatic El Nom. Operating Press. El Other El Exempti]

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signedc* _* FL Grass JrQA Tech Specialist Date 4/ UJ! ,* Owner oVOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected th components described in this Owner's Report during the period d to Y_-L- 0A; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this kinspection rome F Swan Commissions NC1524, N-I inspector's 8iature National Board, State, Province and Endorsements Datecr at N Page 2 of 2

FORM NIS-2 OWNER'S REPOR I tOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date May 29, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 212 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1750367-01 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)

.6. Identification of Components: Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 -Repaired, 0 No NV Piping Duke Power N/A 80 N/A 1982 0 Replaced, I-R Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 0O Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, _ _ _ _0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F [0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                    ]0  Replacement               0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced boltingq material in flange at valve 2NV220.
8. Tests Conducted:Hydrostatic fl Pneumatic LI Nom. Operating Press. LA Other El Exemptol Pressure psig Test Temp. _ OF Pressure _psig Test Temp. _ OF Pressure _psig Test Temp. _ OF
9. Remarks Visual functional performed per task 2 of this work order with no leaks detected.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed aQ-*1<*g FL Grass JrQA Tech Specialist Date o_._ Owner or1 wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT haye inspected the, omponents described in this Owner's Report during the period 

        ý-/Y- o:>io 5-1 29:.- Aand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o property damage or a loss of any kind arising from or connected with this inspection. u 0Swan Commissions NC1524, N-I Inspector's re National Board, State, Province and Endorsements 6 Dates- 7 )9> Page 2 of 2

FORM NIS-2 OWNER'S REPOR i rOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv 1a. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hacqers Ferry Road, Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1751042 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME 111 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No Upper lateral Duke Power 4 N/A N/A N/A 0 Replaced, support S/G A R1 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, C 0 [_ Replacement 0 Yes C 0 Repaired, 0 No O Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0O Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0 Replacement                0   Yes F

0 Repaired, 0 No O Replaced, 1_11 Replacement 10 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced control valves in snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other E] Exemptl-Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - / *6- FL Grass Jr,QA Tech Specialist Date d,,-',.- - 

                       'Owner ofýOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3- 7         R to2-_/3- & D ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. Inspector's,* t ý_Jrome F Swan aNational Commissions NC1 524, N-I Board, State, Province and Endorsements Date. X Page 2 of 2

FORM NIS-2 OWNER'S REPOi "OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv 1a. Date March 26, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 012 03 I-IShared (specify Units )
3. Work Performed By: Duke Power Company Address: 526 S. Church Street, Charlotte NC 28201-1006 3a. Work Order #: 1751150 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NS - Nuclear Sampling 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases

-- (b) Applicable Edition of Section Xl Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)

6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Name of Component Col 6 Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2NM-VA-6 Kerotest VB34-19 21376 N/A 1977 0 Replaced, I_ 1 0 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0 Replacement                0 Yes.

C 0 Repaired, 0 No 0 Replaced, D [0 Replacement 03 Yes 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0 Replacement                0   Yes F                                                                                                                                                 0  Repaired,                  0 No 0  Replaced, 0  Replacement                01 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced disc and bonnet.
8. Tests Conducted:Hydrostatic 0 Pneumatic LI Nom. Operating Press. I] Other 0I Exemptol Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks MNT Functional performed per task 8.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed ____ FL Grass Jr,QA Tech Specialist Date 3 .2.-,, Ownerr Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the.components described in this Owner's Report during the period 

       .----              to-.?    --     and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this inspection. rome F Swan Commissions NC1 524, N-I Inspector's S dure tf National Board, State, Province and Endorsements Date-Z - ,,' Page 2 of 2

FORM NIS-2 OWNER'S REPOK. -*OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date April 3, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1761865 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organlzatlon Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda,. N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)

'6. Identification of Components: Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mig Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 03 Repaired, 0 No 2MCR-NV-4218 Duke Power N/A N/A N/A N/A 0 Replaced, BR_ [ Replacement 0 Yes B 0 Repaired, El No 0 Replaced, [0 Replacement 0 Yes C 0 Repaired, El No 0] Replaced, [] Replacement El Yes D 0l Repaired, El No El Replaced, 

                                                                                                                                           ]0 Replacement                 0l Yes E                                                                                                                                          El Repaired,                   0 No 0l Replaced,

[O Replacement El Yes F E Repaired, El No 0 Replaced, 0_ Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced item numbers 9 and 10.
8. Tests Conducted:Hydrostatic E Pneumatic [] Nom. Operating Press. [i Other EJ Exemptl-Pressure .psig Test Temp. _ OF, Pressure .psig Test Temp. _ OF Pressure .psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/_A Certificate of Authorization No. N/A Expiration Date N/A Signed ý -&44. FL Grass JrQA Tech Specialist Date q__ Ownerc'r Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSBCT hve inspected the components described in this Owner's Report during the period 2= 0 to y.*- O ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this 

      / inspection.

m rome F Swan Commissions NC1524, N-I Inspector's SWabre National Board, State, Province and Endorsements ( Date 5; cb, y Page 2 of 2

FORM NIS-2 OWNER'S REPOR r:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order#: 1761865-01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2NV841 Kerotest 95EP0240 N/A N/A 1995 0] Replaced, 1 0 Replacement 0 Yes B 0 Repaired, 0 No 2NV841 BW/IP International 97EP0308 N/A N/A 1997 0 Replaced, 121 Replacement 0 Yes C 0 Repaired, 0 No NV Piping Duke Power N/A 80 N/A 1982 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0  Replacement                0 Yes E                                                                                                                                              0   Repaired,                  0 No 0   Replaced,
                                                                                                                                 --            D0  Replacement 10                 Yes F                                                                                                                                              0   Repaired,                  0 No 0   Replaced,
                                                                                                                                               ]0  Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve and r)iDina between welds NV2FW73-32 & 37 and NV2FW102-5 & 6.
8. Tests Conducted:Hydrostatic El Pneumatic 0l Nom. Operating Press. I] Other El Exempto Pressure psig Test Temp. _ F Pressure _psig Test Temp. OF Pressure psig Test Temp. °F
9. Remarks functional performed per task 04 bv procedure MP/O/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date A' Ž,X Ownier or,6wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT ye inspected th-components described in this Owner's Report during the period 

        /12-Q             to Y*-,.LiY;      and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Jerome F Swan Commissions NC1524, N-I DInspector- 'gnature National Board, State, Province and Endorsements Date L /~ '0S2 0, Page 2 of 2

FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES* As Required by the Provisions of the ASME Code, Section III, Division 1 Pg. 1 of 2 BR/fIP I*MAT ONQLL INC.

1. Manufactured and certified by PUMP DIV., IDLS ANGEL*S OPERATION 2300 EAST VERNON AVE, VERNN. CA 90058 (name and address of NCertificate Holderl
2. Manufactured for DUKE POWER CO. McGUIRE SITE 13225 HA]GMS FEWR. RD. BHR 73 HUrTERSVILLE, NC 28078-8985 (name and address of Purchaserl
3. Location of installation DUKE POWE CO. MCGUIRE SITE 13225 HAGERS FERRY RD. HW! 73 HUNTERSVILLE. NC 28078-8985 (name and addressl
4. Model No., Series No., or Type Drawing DP-D-9911-(1) Rev. C CRN MIA
5. ASME Code, Section III, Division 1: 1971 WUITER 1971 1 N/A (editionl (addenda date) (class) (Code Case no.)
6. Pump or valve VALVE Nominal inlet size 2 Outlet size 2 (in.) (in.)
7. Material: Body SAJL82 GR F316 Bonnet N/A Disk SA479 TYPE 316 Bolting N/A (a) (b) (c) (d) (e)

Cert. Nat'l Body Bonnet Disk Holder's, Board Serial Serial Serial Serial No. No. No. No. No. 97EP0303 N/A 328282 SN ARN'2 N/A 328293 SN 5 97EP0304 N/A 328282 SN AHN7-6 N/A 328293 SN 6 97EP0305 N/A 328282 SN AiM7-10 N/A 328293 SN 11 97EP0306 N/A 328282 SN AHM7-19 N/A 328293 SN 1I 97EP0307 N/A 328282 SN AEM8-2 N/A293 SN 17 97EP0308 N/A 328282 SN AHKB-3 NA 32R2_91 S_ IQ .Supplemental information in form of lists, sketches, or drawings may be used provided (1) size is 8 Y x 11, 121 information in items I through 4 

*on this Data Report is included on each sheet, (31 each sheet is numbered atid the number of sheets is recorded at the top of this form.

(12/88) This form 1E00037) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300. Fairfield. NJ 07007-2300.

FORM NPV-1 (Back - Pg. 2 of _2_ 97ZV0303 THRU Certificate Holder's Serial No. 97ZV0308 3600 100 1500#

8. Design conditions psi 1F or valve pressure class (1)

(pressure) (temperature)

9. Cold working pressure 3600 psi at 1000F
10. Hydrostatic test 5400-5450 psi. Disk differential test pressure 3960:4010 psi
11. Remarks- MATERIAL COVER: SA182 GR F316 NAMEPLATE ATTACHED BY WIRE CERT HOLDERS SN COVER 97EP0303 328290 SN 1 97EP0304 328290 SN 2 97EP0305 328290 SN 3 97EPO306 328290 SN 4 97EP0307 328290 SN 5 97EP0308 328290 SN 6 CERTIFICATION OF DESIGN Design Specification certified by ROBERT EUGENE MILLER P.E. State N.C. Reg. no. 4860 Design Report certified by DAVID A. URANGIA - P.E. State CA. Reg. no. M19547 CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code, Section III, Division 1.
  -N Certificate of Authorization No.                         N-1130                         J        Ex            -JNE10, 1999 Date *p?*,*2.<:       Name              D*'INTERNATIONAL INC.

(N Certificate Holderl (authorized representativel CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ___ _ __ ___ __ and employed by - GUT of MOium, MASS. have inspected the pump, or valve, described in this Data Report on SEP' 2 3 199 , and state that to the best of my knowledge and belief, the Certificate Holder has con-structed this pump, or valve, in accordance with the ASME Code, Section III, Division 1. 

                                                                 *FACTORYI MUTUAL ENGINEERING ASSOCIATION By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

W_ýWigN/ (fCmoisozedinspector) 

                                                                                            /misosP~',          ,~ /S6 (Nat'l. 8d'"incl. endorsements) and state or prov. and no.]

(1) For manually operated valves only. 

                                                                                                                                                \    vWo

FORM NIS-2 OWNER'S REPO. ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 6. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1761865-13 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0] No 2MCR-NV-4781 Duke Power N/A N/A N/A N/A 0 Replaced, 21 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 01 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, _0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement               0   Yes E                                                                                                                                              0 Repaired,                  0 No 0 Replaced,
                                                                                                                                              ]0 Replacement               0 Yes F                                                                                                                                              0 Repaired,                 .0 No 0 Replaced,
                                                                                                                                         ... 0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced item number 2.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptlZ Pressure -psig Test Temp. OF Pressure .psig Test Temp. _ OF Pressure .psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed ea '* FL Grass Jr,QA Tech Specialist Date .,_,_ Owner oe'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION' I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected th components described in this Owner's Report during the period O3j-0to -'*- 2 0 ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. 

                              -- .        rome F Swan        Commissions          NC1524, N-I Inspýector'sg/81ture                                       National Board, State, Province and Endorsements

( Date 0cLz22.O Page 2 of 2

FORM NIS-2 OWNER'S REPO. ,zOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1769371 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organizatlon Job 0 Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A
4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME 111:1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998. 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0-] Repaired, 0 No 2NC-VA-3 Crosby N56925-00-0002 26 N/A 1974 10 Replaced, I 1 0 Replacement 0 Yes B 0 Repaired, 0 No 2NC-VA-3 Crosby N56925-00-0001 25 N/A 1974 C Replaced, [0 Replacement 0 Yes C 0 Repaired, [0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, C No O Replaced, 0 Replacement 0 Yes F 0 Repaired, C No 0 Replaced, 0] Replacement 03 Yes F 0 Repaired, C No 0 Replaced, 0_ Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. 0 Other El ExemptD Pressure 2235 psig Test Temp. 558 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional test performed per task 4.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date -/ /0/ Ownerpf Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT hye inspected th omponents described in this Owner's Report during the period 

       .         t        to        -    ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                      &      ,/  ,ý--erome     F Swan       Commissions           NC1524, N-I Inspector's 8ig(ature                                    National Board, State, Province and Endorsements Date      -   7-i*2co Page 2 of 2

,       S              -                             'U
              -         '                          f                                                    C CR 0 SUY              VALVE             84   OA GE           CO U PAAMY W R E UTH AL4      U     1 A S S FORM NV-I FOR SAFETY AND SAFETY RELIEF VALVES                                        Q.C.-44B As required by the Provisions of the ASMI      Code Ru:es NB-2-5 DATA REPORT Safety and Safety Relief Valves
1. Manufactured By -- Crosby VaI ve & Gage Coapany, 43 Kendrick St.. Wrentham, Mass. 02093 6M6 IIB-BP-86 Name and Address Model No. N- 5 6 9 2 5 O'rder No. N-300580 Contract Date 2/12/73 Duke Power Company
2. Manufactured For Charlotte, North Carolina' Order N.- A-33957 Name and Address S3-Owner Duke Power Company, 422. South Chtrch St.. Charlbtte. North Carolina 28201 Name 4nd Address
4. Location o( Plant McGuire Nuclear Station Unit #1, Cowans Ford, North Carolina
5. Valve Identification I-NC-I Serial No..N56925-00-0001 Drawingx No. DS-C-56925 Rev. 0 2.154 Type Safety Orifice Size M pipe size " Inlet 6 Outlet 6 Safety.Safety Relhef.Pilot.Power Actuated Inch Inch In,1. Inel'
6. Set Pressure (PSIG) 248 5 " 70Q F Rated Temperitute -

Stamped Capacity 420006#/hr i 3  % overpressure 3 Blnwdown ,PSIGt 124 flydrostatic. Test (PSIGj Inlet 4575 Complete Valve 750

7. The material, design. construccion and workma-nship comply with AS'ME-Code. Scction Ill.

Class I Edition 1971 Addenda Date Winter 1972 Pressure Containi,. or Pressure Retaining Components Serial No. Material Specification a:. Castings Identification includig Type or Gr.,de A-351-72,__C_-- ASTM,USA-!351_L 

                                                                                                    -A                        Gr. CF8M Body                                          N90397-31-0003 AST1. A-105-71 Gr.           II Bonnet                                        N90353 0016 b;. Bar Stock and Forgings Support Rods Nozzle ASTH A-1.2-71 Cr. F N90399-31-0003.                         ASM. SA-182 Q-r, F "N90426-33-00T0                          Hlavnes Stellite Cr. B6 Disc Insert Top                                                       AST'I4 A-I05-7I Gr.              II _____

Spring Washers Bo Ltom NC90350-32-00356 .A$;:LlL__,5 _-10Qi.C _.__I O151" 3.~2 +"A Adjusting Bolt Spindle 290354-34-0025 AS.E SA-193 Cr. 136

-..ASTM A-276-72 Type 440C Spindle Ball R90355-0025 ASMEI SA-276 T,,nc 440C

.-..-... ,-.,-r:r~' . ~.-

C-. C. I I 

   -f A                                                          Serial No. or                                      Material Specification
 $                                                         Identification                                     Including Type of Grade i
c. Spring NIrX-2761-00 1fi ASTM A-304 Gr. 516mir I

I

  • d. Bolting
e. Other Parts such as Pilot Components Disc Holder N90356-34-0014 Tnonpl.718 ..

ASTM A-1U3-] (r. B/" Bonnet Stud 87589 AS.E SA-193 Qr, T7 ASTIM A-194-71 Gr. 2H1 Bonnet Stud Nut 2371. ASUE SA-'194 Cr. 2H We certify that the statements made in this report are correct. Date ..... 19*..l_ Signed Crosby Valve & cage Co . By ma , Ic t Lu Cr QA Manager Certiticate ofat uthorization No. 331 expires November 9, 1974 DESIGN INTO1RMATION ON FILE AT CROSBY VALVE & GAGE COMPANY DESIGN REIPORT NO. EC-158 CERTIFICATE OF SHOP INSPECTION I. the undersigned, ho!dir*g a valid commission issued by .he National Board of Boiler .nd Pressure Vc-sse*l Inspectors arn.d the State or Province cf.Ma,23- . ard employed by." Mutual Boiler & hi ,-"rns,:rarce 1.. Co.*, .Wi.altham. .- ass. have Inspected the cqtipnmeni dcscrt.ed in this Data Report on. 1 - and state tbat to the best of my knowledge and belief. the L.anufacturer has coinstructed this equip-ment in accord'-nce with the aplihcable Subsections of AS.ME Section ill. By signing this ce:tificate. reither the Inspector nor bis-employer makes any war.an.y. ez-pressed or iniplcd. concerntir. the equipment described in this Data Repott.ruttherniore. neither the Inspector no, his employer shall be hable many manner for any personal injury or. property damage or a loss of any kind arising from or connected with this inspection. - 

                                                                 *Factory Mutual Group of Insuralice Co.

Date 19 (lbaprctnr *' .- 6.=-- Commissions ( tNaton-l Pord. Stzre. Provirce and No.i 

                                                                                                                                -w

J. . DUKE POWER COMPANY DESIGN ENGINEERINIG ,EPARTMENT VENDOR' QUALITY ASSURANCE CERTIFICATION Name of Vendor Croshy Vlve- 8- fi.p ]pO2ny Item No. Address of Vendor Plant Wrenth-m, Mas._ 03, Spec. No-.CS.-205.O9 Rev. I Component(s) or Material Steel S.iferv Valve .Date 12/1I,7c; Shipping ID No.

  • Release No. L. - 9:5 Mill Power Order No. A-33957 Certification Included Yes Full X Partial The following listed tests and inspections have been completed as required by specification: (If 'partial certification, list materials or components for which certification applies.)
1) Tested in accordance lwitrh Ornphv PTrnL 4 i,- .T-11('6-n 2).

3) Physical and. Chemical Analysis Major Repair Records and Chart x Design Report Repair NDT x Stress. Report Hydro (Test Press.-PSIG ) X Heat Treatment Cleanliness x Radiographic Test Operating Test x x Ultrasonic Test Performance Curve _N/A Magnetic Particle X ASME Data Report x x Penetrant Tests X Personnel Qualifications on Record Deviation Record None .The following OA bocumentation as recuired by zhe specification is attached to' the original copy of this form: (If *a-ta& certification, include documenta-tion applicable only to this specific 5h,ip..ent.) Valve Document-.tioron F..ckr:fe Rev. 1 (Continued) Form ~3O.l Form 930.1! (Continued) Rev . 1

IF DUKE POWER ti-iPANY DESIGN ENGINEERING DEPARTMENT VENDOR QUALITY ASSURANCE CERTIFICATION The listed component(s) or material(s) conform to the requirements of Duke Power Company Specification "c$-1205.09 Rev. I with the approved deviations noted above. The ;A documentation -as been completed and attached to this form. No later than component or material shipment, the corplete OlA documentation packet is being transmitted to Duke Power Company 

            . S. K. Blackley,   Jr.,   Chief   Engineer,    Mechanical  & Nuclear Division
       -          C. J. Wylie.,  Chief Engineer,       Electrical  Division L. C. Dall,         Chief Engineer,      Civil &Environmental Division Design Englineering Department P. 0. Box 2178 Charlotte, N. C. 28242-A   copy of this completed Vendor Oual;*.y Assurance Certific3tion                               will worm be included with             shipping     papers- and snipped with the component to Duke Power Cormpany,     at      the    address des.ignated ir. the specification. This is to certifv that    the     item of eauipnert -dentifie! above fully meets the reQuiremrents of the above          listed      specification- inc.iuding all of the codes, standards, test requirements, and quality assurance reauirements invoked therein.
                                                     *eVi-;z               ie        ori       S ionature T i tie                       Da te   ___

.Form 930.1 Rev. i

FORM NIS-2 OWNER'S REPOR. ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 9. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hapers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 R12 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1799893 Address: 526 S. Church Street. Charlotte NC 28201-1006 Repair organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification -ofComponents:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, 01 No 2MCA-CA-87 Duke Power N/A N/A N/A N/A 0 Replaced, [] Replacement 0 Yes B E Repaired, El No 0 Replaced, El Replacement El Yes C El Repaired, El No El Replaced, El Replacement El Yes D 0l Repaired, El No El Replaced, El Replacement El Yes E El Repaired, 0l No 0l Replaced, El Replacement El Yes F 0 Repaired, 0l No El Replaced, 0l Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced pivot pin.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. [] Other El Exempt---

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section X1. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed d .k ý FL Grass Jr,QA Tech Specialist Date T Owner otOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

           -' -   - 0 5 to      - +/-I - Q Q-,? and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this 

         *nspection.
                              .,e-z.-Je rome F Swan          Commissions          NC1524, N-I l-Inspector's Sidntture                                       National Board, State, Province and Endorsements Date*3             O/-ff Page 2 of 2

FORM NIS-2 OWNER'S REPO; . FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company 1a. Date 03/22/2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Hu-ntersville, NC 28078 2a. Unit: 031 0X2 03 EShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order # : 01801521-01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. . (a) Identification of System: NI - Safety Iniection 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 11 No Valve 2NI-0349 Kerotest NU3-24 12035 N/A 1976 12Replaced, 1 0 Replacement I'KYes B El Repaired, El No 0l Replaced, _ Replacement El Yes C El Repaired, El No El Replaced, 0_ Replacement El Yes D El Repaired, El No El Replaced, _E Replacement El Yes E 0 Repaired, El No El Replaced, [E Replacement El Yes F El Repaired, El No E Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Made Bonnet to Body Seal Weld
8. Tests Conducted:Hydrostatic Li Pneumatic Li Nom. Operating Press.E Other Li ExemptilZ Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed' F.R. SorrowQA Tech Support Date 03/22, 2008 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the mponents described in this Owner's Report during the period 3-/- OA' to 3- ,,<*B; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for inspection. any personal injury roperty damage or a loss of any kind arising from or connected with this 

                             -           ome F Swan        Commissions          NC1524, N-I Inspector's   .ale                                       National Board, State, Province and Endorsements Date.3-$3' Page 2 of 2

FORM NIS-2 OWNER'S REPO, zOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 18, 2008 526S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1802555 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair OrganIzation Job
  • Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:. N/A
4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A E0 Repaired, E0 No 2MCA-S-NV-535- Duke Power 7655 N/A N/A N/A 0 Replaced, 01H _0 Replacement 0 Yes B 0 Repaired, 0 No 2MCA-S-NV-535- Duke Power 03615873-025 N/A N/A N/A 0 Replaced, 01H _] Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes E 0 Repaired, 0 No 

                                                                                                                                               - Replaced, 0 Replacement                 0 Yes F                                                                                                                                               0 Repaired,                   0 No o  Replaced, 0 Replacement 1-0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptol Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. - OF,
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed ,*Z"*0- FL Grass Jr,QA Tech Specialist Date .Yz, o, Owner o(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned,. holding a valid commission issued by the National Board of Boiler and Pressure Vessel- Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

       .a- J Z)3 to *- - 1. - 0$, and state that to the best of my knowledge and belief,, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By'signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. J -a,*/Jerome F Swan Commissions, NC1524, N-I Inspectors 6igr ature National Board, State, Province and Endorsements Date t3 Y Page 2 of 2

FORM NIS-2 OWNER'S REPO. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 21, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1802706 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/_A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NI - Safety Injection 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 03 Repaired, 0 No 2MCR-NI-4025 Duke Power 12101 N/A N/A N/A 0 Replaced, El Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes D                                                                                                                                             0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced load pin.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptEO Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed wr n FL Grass Jr,QA Tech Specialist Date Jzi/-v8 Owner or 6wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Z4&-,V " to-!* O 'and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this nspection. / inspectio. .4 -a. 

                                  -- l.rome F Swan Commissions 7   Inspector's S-ignure NC1524, N-I National Board, State, Province and Endorsements 6     Date-3*.-91         2- ot0a Page 2 of 2

FORM NIS-2 OWNER'S REPO. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date May 5, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1802766-01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A NI- Repaired, 0l No NV Piping Duke Power N/A 80 N/A 1982 0- Replaced, 

                                                                                                                                                   ]0  Replacement               21 Yes B                                                                                                                                                   El  Repaired,                 0l No O   Replaced,

__ Replacement E3 Yes C 0l Repaired, 0l No 0l Replaced, 

                                                                                        ....                                                     1 0 Replacement                 0l Yes D                                                                                                                                                   E0 Repaired,                  El No 0l Replaced,

__ Replacement El Yes E El Repaired, 0l No 0l Replaced, I El0 Replacement El Yes F E Repaired, El No El Replaced, 0E Replacement El Yes Page t of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work ReDaired weld number 2RCHP-IN.
8. Tests Conducted:Hydrostatic E Pneumatic El Nom. Operating Press. R1 Other El ExemptEO Pressure 2560 psig Test Temp. 94 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional performed on work order 1748696 - 07 per procedure MP/O/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist I 'Oývner qfOwner's Date " __, Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period to z; 

                      ,ZWi*2c                 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this- Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this inspection - -. 

                                       -i erme F Swan         Commissions         NC1524, N-I
         *nspector's Signa're         -National                             Board, State, Province and Endorsements Page 2 of 2

FORM NIS-2 OWNER'S REPOt. .:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 3. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 l12 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1802942 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

_ Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, 21 No 2MCR-NV-5055 Duke Power N/A N/A N/A N/A 0l Replaced, [] Replacement El Yes B El Repaired, El No [] Replaced, 0_ Replacement El Yes C El Repaired, El No 0l Replaced, _ Replacement El Yes D El Repaired, C3 No 0l Replaced, _E Replacement El Yes E E Repaired, [E No El Replaced, [E Replacement El Yes F E Repaired, [E No El Replaced, 0E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced item numbers 3, 4, and 5.
8. Tests Conducted:Hydrostatic 0 Pneumatic 0 Nom. Operating Press. 0 Other El Exempt@

Pressure. psig Test Temp. OF Pressure psig Test Temp. OF Pressure .psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 4,01 . FL Grass JrQA Tech Specialist Date __ Owner o(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the.National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3- . f-,,f'to,.Y- O ; and state that to the best of my knowledge and belief, the Owner P/. has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this 

      *1inspection.            /
                         '1           4 Jerome F Swan          Commissions          NC1524, N-I "Inspector'sS*'nature                                        National Board, State, Province and Endorsements 6     Dater Page 2 of 2

FORM NIS-2 OWNER'S REPG. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoany la. Date March 24,. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 -Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1803324 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCR-NV-4106 (A) Duke Power 5002 N/A N/A N/A 0 Replaced, 

                                                                                                                                             ]0 Replacement               0 Yes B                                                                   0 Repaired,                  0 No 2MCR-NV-4106 (A)               Duke Power                   36739                      N/A                    N/A               N/A      0 Replaced, 0  Replacement               0   Yes C                                                                                                                                             0  Repaired,                 0   No 2MCR-NV-4106 (B)               Duke Power                   10972                      N/A                    N/A               N/A      0  Replaced, 0  Replacement               0   Yes D                                                                                                                                             0  Repaired,                 0   No 2MCR-NV-4106 (B)               Duke Power                   36738                      N/A                    N/A               N/A      0  Replaced,

[] Replacement E] Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 01 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 10 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wor kI Pgn n~sr'cdnriczhhinre
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. 0l Other E- ExemptOl Pressure psig Test Temp. OF__

Pressure _psig Test Temp. ____F Pressure .psig Test Temp. _OF_

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed , 

                       '0,ne'r--Owner's FL Designee, Grass Jr,QA Title Tech Specialist      Date *-5 ",/,,lofi CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have ins ected the components described in this Owner's Report during the period
        -:-Y 2-OT"toT 2-26-_A? and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspec~tion._- peti-n. 4-i.--,,e rome F Swan Commissions NC1524, N-I Inspectors 81* ture National Board, State, Province and Endorsements Date ____ Page 2 of 2

FORM NIS-2 OWNER'S REPOt. iOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date April 1. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units _
3. Work Performed By: Duke Power Company 3a. Work Order #: 1803674 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM#: N/A

4. (a) Identification of System: NC - Reactor Coolant 4. (b) Class of System: A
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCR-NC-4272 Duke Power 3522 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 2MCR-NC-4272 Duke Power 35716 N/A N/A N/A 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                            ]0  Replacement                0 Yes D                                                                                                                                           0   Repaired,                  0 No 01  Replaced,
                                                                                                                                            ]0  Replacement                0 Yes E                                                                                                                                           0   Repaired,                  0 No 0   Replaced,

[0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber and adapter plate.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. LI Other LI Exemptl-Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 'N_4 & FL Grass Jr,QA Tech Specialist Date 4Z/ .- ____ Owner ort-wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

       .3 - .I,-. O8 to 41-         0
                                    -"    ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. ome F Swan Commissions NC1524, N-I Inspector's?g ature National Board, State, Province and Endorsements CI/ Date I-/ /- IGO Page 2 of 2

FORM NIS-2 OWNER'S REPO, :OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date April 7. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 0-Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1804042 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: B
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section X1 Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, IA- No 2MCA-NV-5315 Duke Power 945 N/A N/A N/A [] Replaced, 1 0 Replacement 0 Yes B 0 Repaired, IA No 2MCA-NV-5315 Duke Power 30700002/004 N/A N/A N/A 0 Replaced, _0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No O Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes F 0l Repaired, 0 No 0 Replaced, [0 Replacement 0l Yes Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. E] Other LI Exemptl-'

Pressure psig Test Temp. _ OF Pressure psig Test Temp. OF Pressure .psig Test Temp. °OF

9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed or FL Grass Jr,QA Tech Specialist Date 'iT 7 _ Oer or bwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected thV components described in this Owner's Report during the period Z5-- "8' to V_*-')- C  ; and state that to the best of my knowledge and belief, the -Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this linspection. / Jerome F Swan Commissions NC1524. N-I lnspector'*;' nature National Board, State, Province and Endorsements K Page 2 of 2

FORM NIS-2 OWNER'S REPOi.. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date 03/27/2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferrn Road. Huntersville. NC 28078 2a. Unit: 01 rK12 03 ElShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order # : 00583573-07 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: RN Nuclear Service Water 4;-. (b) Class of System: C
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A .XlRepaired, 0 No 2RNPU0004 Bingham B-2-988 88 (2B)RNPU 1973 0 Replaced, 

                                                                                                                                              ]0 Replacement               [EYes B                                                                                                                                              0 Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement               0 Yes D                                                                                                                                              0  Repaired,                 0 No 0  Replaced,
                                                                                                                                              ]0 Replacement               0 Yes E                                                                                                                                              0  Repaired,                 0 No 0  Replaced, 0  Replacement               0 Yes F                                                                                                                                              0  Repaired,                 0 No 0  Replaced,
                                                                                                                                              ]0 Replacement               0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Weld Buildup on ID Of Tor and Bottom Casinci of 2RNPU0004 (2B)
8. Tests Conducted:Hydrostatic Li Pneumatic LI Nom. Operating Press. El Other Ei-Exempt-l Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed*,eL.,* F.R. Sorrow,QA Tech Support Date 03/27, 2008 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 4`7- to-3 lyl-ID ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed jinspection. or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this rome F Swan Commissions NC1524, N-I nspector'sSQiature National Board, State, Province and Endorsements ( Date~r____ Page 2 of 2

FORM NIS-2 OWNER'S REPOi.. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoany la. Date June 28,2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a, Unit: 01 02 03 OShared (specity Units -)
3. Work Performed By: Duke Power Company 3a. Work Order #: 1699256 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # MD200353

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0l No RN Piping Duke Power N/A 60 N/A 1982 0 Replaced, B-0 _0 Replacement 0l Yes Repaired, 0 No o3 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes C                                                                                                                                              01 Repaired,                  0 No 0] Replaced, 0  Replacement                0 Yes D                                                                                                                                              0] Repaired,                  01 No 01 Replaced,

[0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                   *          ]0 Replacement                0 Yes F                                                                                                                                              0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Additional piping added per MD200353.
8. Tests Conducted: Hydrostatic El Pneumatic El Nom. Operating Press. 0 Other 0l Exemptol Pressure 91 psig Test Temp. 65 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Test performed per MP/O/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 6 FL Grass Jr,QA Tech Specialist Title Date .-- '!-p._. Owner r Owner's Designee, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 2liI~i a to 'akQ7 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for Sanypersonal inju raproperty damage or a loss of any kind arising from or connected with this ome F Swan Commissions NC1 524, N-I Inspectors Dae//C" glNational Board, State, Province and Endorsements P7*g;*tr Page 2 of 2

FORM NIS-2 OWNER'S REPO, ,, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date 03/21/2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 1K2 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 01699326-01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: KC - COMPONENT COOLING 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, D3 No PIPING Duke Energy N/A 78 2KC 1982 0] Replaced, __Replacement ElYes B El Repaired, 0l No O Replaced, 0_ Replacement El Yes C El Repaired, El No 0 Replaced, O Replacement El Yes D El Repaired, El No 

                                                                                                                                              . . Replaced, El Replacement                El Yes E                                                                                                                                              0l Repaired,                  0l No El Replaced,

__ Replacement El Yes F El Repaired, El No El Replaced, 0_ Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work. Replaced Studs and Nuts in flancie joint 2KC4-FL2 at valve 2KC-57A
8. Tests Conducted:Hydrostatic Li Pneumatic LI Nom. Operating Press. LI Other l-ExemptliI Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed F.R. Sorrow,QA Tech Support Date 03/21/2008 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National.Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT ha .e inspected thp,.components described in this Owner's Report during the period _3- 0 to. . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's.Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o0 property damage or a loss of any kind arising from or connected with this nspection. erome F Swan Commissions NC1524, N-I 

         .nspector's Sigrf tre                                       National Board, State, Province and Endorsements 3

Date- _- A1-;_ Page 2 of 2

FORM NIS-2 OWNER'S REPO, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date March 24, 2008 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haciers Ferry Road. Huntersville, NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. WorkOrder#: 1699327 / 01 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: KC - Component Cooling 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No KC Piping Duke Power N/A 78 N/A 1982 0 Replaced, 1_ Replacement [] Yes B 0 Repaired, 0 No 03 Replaced, [0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 01 Yes D 0 Repaired, 0 No 0 Replaced, E [0 Replacement 0] Yes 0 Repaired, 0 No 0 Replaced, 0 Replacement 0l Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material in flange at valve 2KC82.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. l] Other El ExemptE Pressure psig Test Temp. OF Pressure _psig Test Temp. OF Pressure _psig Test Temp. OF
9. Remarks Visual functional performed per task 11 of work order.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed a FL Grass JrQA Tech Specialist Date wbrner or0 wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have ins ected the components described in this Owner's Report during the period _ f-I -0 (Y to I-o Q&,-and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for i,nspection . any personal injury or property damage or a loss of any kind arising from or connected with this hFspecn.* _,rome F Swan Commissions NC1524, N-I 

             ýInspectors Sigiit re                                      National Board, State, Province and Endorsements Date --            C - "         0. -

Page 2 of 2

FORM NIS-2 OWNER'S REPC. . FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date May 8, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet I of I
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road,. Huntersville, NC 28078 2a. Unit: 01 02 03 1Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 1763015-32 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/..A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASMVE 1111971 Edition, Summer and Winter Addenda, N/A (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC Code Cases and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, 0l No RN Piping Duke Power N/A 60 N/A 1982 0l Replaced, [0 Replacement 0 Yes B E Repaired, El No 2RN-VA-408 Crane D5479 N/A N/A 2006 0l Replaced, C 20 Replacement 0] Yes El Repaired, 0l No 2RN-VA-410 Crane D5892 N/A N/A 2006 0l Replaced, D El Replacement 0I Yes El Repaired, El No El Replaced, E 0E Replacement El Yes 0 Repaired, El No El Replaced, ______________ ____ E Replacement El Yes F El Repaired, El No El Replaced, __0_E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Added valves 2RN VA 408 and 410 with piping per MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. Z] Other El ExemptD Pressure 71 psig Test Temp. 52.4 OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ OF
9. Remarks Functional performed per task 32 on procedure MP/O/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed v*gý -,aQFLGrass JrQA Tech Specialist Date _15__/*ooas Owner or Q*vner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

         ,-~-~-~-2         o         *and          state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate .neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this 

      /inspection.
                                   ,- -      me F Swan         Commissions           NC1524, N-I Inspector's Signdt*r*                                        National Board, State, Province and Endorsements
     /Date            /-J Page 2 of 2

r FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES, 

                            ýs Required by the Provisions of the ASME Code, Section III, Division 1
     *Corrected NPV-1                                                                                                                            Pg. 1 of 2
1. Manufactured and certified CRANE Nuclear. Inc.. 860 Remington Boulevard. Bolingbrook, IL 60440 by (name and address of N Certficate Holder)
2. Manufactured for Duke Energy Corporation. PO Box 1006, Charlotte, NC 28201-1015 (name and address of puroSser)
3. Location of installation McGuire Nuclear Station. 13225 Haqers Ferry Rd. HWY 73. Huntersville, NC 28078-8985 (nams and address)
4. Model No.. Series No.. or Type 47-1/2UF-SPL g CC03984 Rev. C CRN N/A
5. ASME Code, Section 11,Division 1: 1998,-, 2000 -- 3 N/A (editon) (addenda (class) [Code Case no.)

date)

6. Pump or valve Gate Valve Nominal inlet size 6 Outlet size 6 (in.) 0in.)
7. Material:

SA193 B8M . (a) valve Body SA351 CFBM .- Bonnet SA351 CF8M ^- Disk SA35 CF8M Bolting ' SA194 SM (b) pump Casting Cover Bolting (a) (b) (C) (d) (e) Cent. Nat'l Body/Casing Bonnet/Cover Disk Holder's . Board Serial Serial Serial Serial No. No- No. No. No. D5478 -" N/A 05408 - 05409 D5422 D5479 - N/A 05405 05410 D D5419 D50 N/A D5407 D-5411 D5421 

 . Supplemental information in the form of "Ists. sketches. or drawings may be used provided (1) size is B A x 11, (2) information in items 1 through 4 on this Data Report is included on each sheet. (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

This form (E00037) may be obtained from the Order Dept. ASME. 22 Law Drive. Box 2300. Fairfied. NJ 07007.2300.

FORM NPV-1 (Back) -- Pg. 2 of 2 Certificate Holder's Serial No. 05478 through D5480 8 Design conditions 135 psi 150 "F or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 275 psi al 100'F
10. Hydrostatic test 425 psi. Disk differential test pressure 305 psi
11. Remarks: 'Corrected P.E. first name from James to Jesse.

PO No. DP20357. PO Item 0040, Dukeltem No. 1MV-556 CNI SO No. 28451-04 CERTIFICATION OF DESIGN Design Specifications certified by *Jesse M. Hawkins P.E. State NC Reg. no. 20159 Design Report certified by NIA P.E. State NIA Reg. no. NIA CERTIFICATE OF COMPLIANCE We certify thaI the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code, Section II1.Division 1. N Certificate of Authorization No.. N-2899 Expires September 24. 2008 Date 08/09/06 Name CRANE Nuclear, Inc. Signed .Agk 9 (Nceriiricate Holder)Z Z JoehP r 'AEgnr CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have inspected the pump. or valve, described In this Data Report on August 09, 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, In accordance with [he ASME Code. Section I11.Division 1. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the component described in this Data Report. Furthermore. neither the inspector nor his employer shall be liable in any manner for any personal injury or properly damage or loss of any kind arising from or connected with this inspection. Date 08/09/06 Signed Commissions IL 1903 IqNat'LBd. (Ind. endorsements) and stale or pro,. and no.) Todd ard (1) For manually operated valves only.

/ FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES" As Required by the Provisions of the ASME Code, Section III, Division 1 Pg. 1 of 2 I. Manufactured and certified CRANE Nuclear. Inc.. 660 Remington Boulevard. Botingbrook, IL 60440 by (nalrf aJ,0r0sS of N CCdef,.tlO H0ldelf

2. Manufactured for Duke Energy Corporation, PO Box 1006. Charlotte, NC 28201-1015
3. Location of installation /McGuire Nuclear Station. 13225 Hagers Ferry Rd. HWY 73. Huntevsville. NC 28078-8985 Ina',e a'4 addess)
4. Model No.. Series No.. or Type 47- 1,2UF-SPL Drawing CC04072 Rev. B CRN NIA
5. ASME Code. Section III,Division 1: V" 1998 /2000 3 N/A

(&on) taddend, (dZIS3) (Cooe case no.) d2le) 

     .6... Pump or valve             '          Gate Valve                Nominal inlet size                  6 (in.)

Outlet size ,_-6 tin.)

7. . Materiat:
                                                                                                                                                      "XA13 87 (a) valve      Body           /A26WC83            Bonnet VSA216 WC8                    Disk     /SA351         CF8M          Bolting     '2SA194 2H (b) pump       Casting                           Cover                                 Bolting (a)                             (b)                          (cI                                   (d)                               (e)

Cert. Natl Body/Casing Bonnet/Cover Disk Holder's Board Serial Serial Serial Serial No. No. No. No. No. w-',5892 NIA D 5896 7' 505U08 --' 05916 N/A V, 05897 VD5909 --- __2:__:D5917 D5894 N/A D5898~II /1)5910 __ Z05______8 D5895 NIA %Zb589 05911 f IS 8 31'8' W '82'Z-'V *1 

   . Supplemenial itormation in the lormnaot sts. sketcres. or drawings may be used provided (1) size is 8 Y,x I I. (2) information in rteeis I though 4 on this Data Report is induded on each shceL (3) each sheet is numbered and rho number of sheets Is recorded at Irn top oWthis loan.

This form (E00037) may be obtained from the Order Dept ASME. 22 Law Drive. Box 2300. Fairfield. NJ 07007-2300.

FORM NPV-1 (Back) --- Pg. 2 of 2 Certificate Holder's Serial No. /O5892 through 05895 8 Design conditions - 135 psi , 95 

                                                                                                   'F of valve pressure class                                    (1)

(pressure (temperature)

9. Cold working pressure / 285 psi at 100"F
10. Hydrostatic test 450 psi. Disk differential test pressure V"315 psi 11.,Jemarks:

0-PO No. 00001637, PO Item 0007. Duke Item No. 1MV-565 CNI SO No. 29401.01 

            ,,,6olting: Studs Hlt. # 2301 13/Nuts HI. # 387035 CERTIFICATION OF DESIGN Design Specifications certified by                     Jesse M. Hawkins                  P.E. State         NC      Reg. no.             20159 Design Report certified by                                 NWA                            P.E. State         N/A    Reg. no.               NIA CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code. Section III. Division 1.

.7 <Certifcate of Authorization No. N-2899 Expires September 24. 2008., Date 12/27/06 Name CRANE Nuclear, Inc. Signed (N Ceecaite HAere) ,, . 

                                                                                                        'I CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                Illinois            and employed by                                         HSBCT of             Hartford. CT        have inspected the pump. or valve, described in this Data Report on                       December 27. 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump. or valve, in accordance with the ASME Code. Section Ill. Division 1.

Bypogrinjg this certificate, neither the inspector nor his employer makes any warranty expressed or implied. concerning the ponent described in this Data Report.. Furthermore. neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection. Date 12/'27/0 Signed .k Commissions IL 932 i~.erd 1erreiii3) and stato C Pr0". W4~;noj-itji.Bi Robert Rains (1) For manually operated valves only. 

  -             .'   _.  (-
                                                                                 ,.- I.  -
                                                                                                                                                                     *t.. "

FORM NIS-2 OWNER'S REPOR, rOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date December 4. 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 DShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-39 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Otlier Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 21 No 2MCA-RN-3404 Duke Power N/A N/A N/A N/A 0 Replaced, RI Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0 Yes F                                                                                                                                               0  Repaired,                  0 No 0 Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanaer oer MOD # MD200464.
8. Tests Conducted:Hydrostatic EJ Pneumatic Nom.

[] Operating Press. 0 Other LI Exemptg] Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ OF Pressure .psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed 1 , FL Grass Jr,QA Tech Specialist Date -k Owner P**Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspectedthe components described in this Owner's Report during the period 

                            "_027 to /**701'           and state that to the best of my knowledge and belief, the Owner has performed exarninatiohis and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, Wither the Inspector nor his employer shall be liable in any manner for 

       /ýny    personal injury or operty damage or a loss of any kind arising from or connected with this
        / spection.                  /

eJ*.erome F Swan Commissions NC1 524, N-I Inspector 's*ign ~t National Board, State, P rovince and Endorsem ents Oate/2'/S--6 Page 2 of 2

FORM NIS-2 OWNER'S REPOR, rOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date December 5. 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 t02 03 EShared (specify Units
3. Work Performed By: Duke Power Company Address: 3a. Work Order #: 1730869-40 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Name of Component Column 5 Col 6 Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 11 Repaired, 0 No 2MCA-RN-3405 Duke Power N/A N/A N/A N/A El Replaced, B 

                                                                                                                                             ]0 Replacement                El  Yes El Repaired,                  El No 0  Replaced, C

__ Replacement El Yes El Repaired, El No O Replaced, El Replacement El Yes D 0l Repaired, El No El Replaced, E 0_ Replacement El Yes E Repaired, El No El Replaced, El Replacement El Yes F E Repaired, El No El Replaced, 0_ Replacement El Yes Page 1of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanaer oer MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptr-Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ IF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date /4,4.O _ 

                       "Uwher or,/wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspecte the components described in this Owner's Report during the period 2Z727             to I-2.07"; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Jerome F Swan Commissions NC1.524, N-I Inspector's'Siq~a re National Board, State, Province and Endorsements 6 Date .- Page 2 of 2

FORM NIS-2 OWNER'S REPOi ,:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoanv la. Date December 5. 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-41 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job
  • Type Code Symbol Stamp: N/.A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464
4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

               ,._Installed                                                                                                                                                       (yes or no)

A 0 Repaired, 0 No 2MCA-RN-3406 Duke Power N/A N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes C [0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0  Replacement               0 Yes F                                                                                                                                                0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other 0l Exemptrl Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date /.44ZZ9*o7 Owner or pfjner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by C have inspected the components described in this Owner's Report during the period 11Z 7107 to/2,/S/ 7 ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this i,_,nspection* 

        .             __Jerome                    F Swan      Commissions         NC1524, N-I Jnespector'mgneuFre National Board, State, Province and Endorsements 6     Date/=                 __

Page 2 of 2

FORM NIS-2 OWNER'S REPOR. OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date December 4, 2007 526 S. Church Street. Charlotte. NC 28201-1-006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: D1 0*2 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. WorkOrder#: 1730869-42 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A "1 Repaired, 0Z No 2MCA-RN-3407 Duke Power N/A N/A N/A N/A El Replaced, B 

                                                                                                                                                  ]0 Replacement                El  Yes El Repaired,                  El No 11 Replaced,

[O Replacement El Yes C El Repaired, El No O Replaced, 0_ Replacement -0 Yes D El Repaired, 0l No El Replaced, El Replacement El Yes E El Repaired, El No El Replaced, El Replacement El Yes F El Repaired, El No El Replaced, El Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.,
8. Tests Conducted:Hydrostatic El Pneumatic l Nom. Operating Press. 0l Other LI Exemptl-Pressure psig Test Temp. _ OF Pressure _psig Test Temp. OF Pressure psig Test Temp. __OF
9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl.. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -I -- 40 FL Grass JrQA Tech Specialist Date ././. -- w~ner or ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period i4UTr 07to / ,l,,/o r-; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this 

        *nspection.,_/

Frome F Swan Commissions NC1 524. N-I Inspectors Si ?at National Board, State, Province and Endorsements 

       /Date /o/_*,).

Page 2 of 2

FORM NIS-2 OWNER'S REPOR , -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI 1, Owner Address: Duke Power Company la. Date Jarnuary 2. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1

2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: [31 02 03 DShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-43 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organizatlon Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0] Repaired, 0 No 2MCA-RN-3408 Duke Power N/A N/A N/A N/A El Replaced, 0I Replacement El Yes B El Repaired, El No 0l Replaced, 0_ Replacement El Yes C El Repaired, El No El Replaced, ____0 Replacement El Yes D E Repaired, El No El Replaced, 0E Replacement El Yes E E Repaired, El No El Replaced, El Replacement El Yes F E Repaired, El No El Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other LI ExemptlA Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed S-e ý FL Grass JrQA Tech Specialist Date -4Z6 .zV Owner orowner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 7 to//-2 10e; and state that to the best of my knowledge and belief, the Owner has performed'dxardinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injur r property damage or a loss of any kind arising from or connected with this 4-/n-sp-*to I/ inspection"Z. Inspector's Si6jn' ye rome F Swan Commissions NC1524, N-I National Board, State, Province and Endorsements I Page 2 of 2

FORM NIS-2 OWNER'S REPOR'i r:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date December 4. 2007 526 S. Church Street. Charlotte. NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1730R69-44 Address: 526 S..Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A KArlV)r 3b. NSM or MM # A r-A

4. (a) Identification of System; RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through Code Cases 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Name of Component Col 6 Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No, Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0I No 2MCA-RN-3409 Duke Power N/A N/A N/A N/A 0 Replaced, 1 0 Replacement 0 Yes B 0 Repaired, 0 No O Replaced, C 

                                                                                                                                                ]0 Replacement                0   Yes 0 Repaired,                   0 No O Replaced, D
                                                                                                                                                ]0 Replacement                0   Yes 0 Repaired,                   0 No 0 Replaced,

[] Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                ]0 Replacement 10                 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hancqer per MOD # MD200464.
8. Tests Conducted:Hydrostatic 0l Pneumatic El Nom. Operating Press. El Other 0] Exemptol Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type.Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed .~ i' FL Grass Jr.QA Tech Specialist Date /24!'4?o2_ Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspepeo the components described in this Owner's Report during the period 

        /1/I             to ,i/._:/97L; and state that to the best of my knowledge and belief, the Owner has performed eximinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for anypersonalinjY or property damage or a loss of any kind arising from or connected with this inspection. rome F Swan Commissions NC1 524. N-I Inspecs n ure National Board, State, Province and Endorsements Date L*. ,* Page 2 of 2

FORM NIS-2 OWNER'S REPOR. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date December 4, 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 E12 03 OShared (specify Units
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1730869-45 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #:- MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME II11971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-RN-341 0 Duke Power N/A N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0 Yes C                                                                                                                                              0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes D                                                                                                                                              0  Repaired,                  0 No 0  Replaced,
                                                                                                                                               ]0 Replacement                0 Yes E                                                                                                                                              0 Repaired,                   0 No 0 Replaced, r_0Replacement                0  Yes F                                                                                                                                              0 Repaired,                   0 No 0 Replaced,
                                                                                                                                               ]0 Replacement                0  Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ New installed hanaer oer MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic 0l Nom. Operating Press. El Other El ExemptZ Pressure psig Test Temp. -OF Pressure psig Test Temp. -OF Pressure psig Test Temp. -OF
9. Remarks (Applicable Manufacturers Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date _,'- 2:2 

                        ' d\ner or Wvner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HB CThave inspe ted the components described in this Owner's Report during the period 1Z"               toO,--2/

to/ -;and state that to the best of my knowledge and belief, the Owner tas pdrformed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Sinspection. / inei..--

  • J*L. rome F Swan Commissions NC1524, N-I Inspector' SJ'n-zy National Board, State, Province and Endorsements Date-/ /7 Page 2 of 2

FORM NIS-2 OWNER'S REPOR OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company 1a. Date December 4, 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 DShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-46 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped" Installed (yes or no) A 0 Repaired, 0 No 2MCA-RN-3411 Duke Power N/A N/A N/A N/A 0 Replaced, I] 0 Replacement 0 Yes B 0 Repaired, 01 No 0 Replaced, C 

                                                                                                                                               ]0 Replacement                0   Yes E0 Repaired,                  0 No 0 Replaced,

[0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0   Yes E                                                                                                                                               0  Repaired,                  0 No 0  Replaced,
                                                                                                                                               ]0 Replacement                03  Yes F                                                                                                                                               0  Repaired,                  0 No 0  Replaced,
                                                                                                                                               ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El ExemptlA Pressure' psig Test Temp. OF Pressure _psig Test Temp. OF Pressure _psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed - -, FL Grass Jr,QA Tech Specialist Date Owner geOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by CT have inspect ad the components described in this Owner's Report during the period 7, 0 . to /Z2Z A*2Z and state that to the best of my knowledge and belief, the Owner h{s performed exarmlintions and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal i"jury or property damage or a loss of any kind arising from or connected with this inspection. r-,-ZrFc Jerome F Swan Commissions NC1524, N-I Inspec 0o' s gnat e National Board, State, Province and Endorsements Date L__LŽ._ Page 2 of 2

FORM NIS-2 OWNER'S REPOh. r:OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date December 4, 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-47 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. - (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-RN-3412 Duke Power N/A N/A N/A N/A 0 Replaced, 

                                                                                                                                               ]0 Replacement                0 Yes B                                                                                                                                              0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                               ]0 Replacement                0  Yes D                                                                             /                                                                0 Repaired,                   0 No

[]Replaced, _ __ 0 Replacement 03 Yes E 0 Repaired, 01 No 0 Replaced, [] Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, [0 Replacement 0] Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exempt[O Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed A .ý, FL Grass JrQA Tech Specialist Date Owner V`Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspe ted the components described in this Owner's Report during the period I*' to 17 L.-S V and state that to the best of my knowledge and belief, the Owner has performed exatninations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Jerome F Swan Commissions NC1524, N-I Inspector's ignat e National Board, State, Province and Endorsements b~ate *.../ To.,*7 

                           /

k Page 2 of 2

FORM NIS-2 OWNER'S REPOh, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date April 15, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haoers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 022 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1730869-65 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A El Repaired, El No RN System Duke Power N/A 60 N/A 1982 0l Replaced, 0 Replacement 0 Yes B 0l Repaired, El No 2RN VA 1086 Crane D5360 N/A N/A 2006 0l Replaced, [0 Replacement 0] Yes C 0l Repaired, El No 2RN VA 1087 Crane D5462 N/A N/A 2006 0l Replaced, 

                                                                                                                                              ]0 Replacement                0I  Yes D                                                                                                                                              0  Repaired,                  0l No o Replaced,

_E Replacement El Yes E 0 Repaired, 0l No 0l Replaced, __ Replacement El Yes F El Repaired, El No 0l Replaced, __ Replacement 0l Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve 2 RN-VA-1086 & 1087 and Piping per MD200464.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom' Operating Press. I] Other El ExemptD Pressure 71 psig Test Temp. 52.4 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks Functional performed per task 65 on procedure MP/0/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A SignedcN.(/ZAý FL Grass Jr.QA Tech Specialist Date . __" 

                       'Owner o(Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Z%- '7- Cto          . -5S-09;      and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this irspection. rome F Swan Commissions NC1524, N-1 nspector's Signrture National Board, State, Province and Endorsements Date ~ ~ c Page 2 of 2

FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES* Aýs Required by the Provisions of the ASME Code, Section III, Division I 

    *Corrected NPV41                                                                                                                              Pg. 1 of 2
1. Manufactured and certified by CRANE Nuclear, Inc., 860 Remington Boulevard, Bolingbrook, IL 60440 (name and addre*s o NCerltifcate Holder)
2. Manufactured for Duke Energy Corporation, PO Box 1006 Chalotte. NC 28201-1015 (name andiddress cfprotase,)
3. Location of installation McGuire Nuclear Station, 13225 Hagers Ferr Rd. HWY 73, Huntersville, NC 28078-8985 (name and address)
4. Model No.. Seres No.: or Type 5341WE Drawing . CC03981 Rev. C CRN N/A
5. ASME Code, Section III, Division 1: 1998 2000 3 N/A (edition) (addenda (cass) (Code case no.)

date)

6. Pump or valve Swing Check Valve Nominal inlet size 8 Outlet size 8 (In.) (in-)
 . 7. Material:

SA193 S8M (a) valve Body SA3S1 CF8M Bonnet SA351 CF8M Disk SA351 CF8M Bolting SA194 8M (b) pump Casting Cover Bolting (a) (b) (c) (d) - (e) Cert. Nat'l Body/Casing Bonnet/Cover Disk Holder's Board Serial Serial Serial Serial No. No. No. No. No. D5375 / 05359 N/A 5363 D5371 /, 05360 A3 05372 "" 053762:4 - Supplemental informadton In the form of lists, sketches, or drawings may be used provided (1) size Is:8 Y, x 1I. (2) information in items 1 through 4 on this Data Report is included on each sheet. (3) each sheet is numbered and the number of sheets is recorded at the top 01 this form. This torm (E00037) may be obtained from the Order Dept. ASME. 22 Law Drive. Box 2300. Fairfield. NJ 07007-2300. 18197%7-9 1819780

FORM NPV-1 (Back) -- Pg. 2 of 2 Certificate Holder's Serial No. 0 05359 through 05360 8 Design conditions 135 7 psi 150 *F or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 275 psi at 100'F
10. Hydrostatic test 425 7 psi. Disk differential test pressure 305 psi
11. Remarks: *Corrected P.E. first name from James to Jesse.

PO No. DP20357. PO Item 0010. Duke Item No. IMV-559 CNI SO No. 28451-01 Hinge Pin Plugs: ASME SA182 F316, Heat # 56457 Cover Plua: ASME SA182 F316. Heat # 56457. Code ACT CERTIFICATION OF DESIGN Design Specifications certified by *Jesse M. Hawkins P.E. State NC Reg. no. 20159 Design Report certined by N/A P.E. State N/A Reg. no. N/A CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code. Section III,Division 1. N Certificate of Authorization No. N-2899 Expires September 24. 2008 " Date 081/09/06 Name CRANE Nuclear, Inc. Signed (NCerlr,cale Holder) , CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have inspected the pump. or valve, described in this Data Report on August 0g, 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code, Section Itt, Division 1. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described In this Data Report. Furthermore. neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection. Date 08/09/06 Signed Commissions IL 1903 dl on ,Insepecto- 

                                                                  )                         i(Na. Eld.(nmd.endorsements) and slate or prov. and no.)

( For mard (1) For manually operated valves only. 181,97-19 18197-80 

               ;   T i-~                       -
                                              .1~'
                                                    \     I.

FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES, As Required by the Provisions of the ASME Code, Section III, Division 1 Pg. 1 of 2

1. Manufactured and certified CRANE Nuclear. Inc.. 860 Remington Boulevard. Bollngbrook, IL 60440 by (name and address of N C*"*titate Holder)
2. Manufactured for Duke Energy Corporation. PO Box 1006, Charlotte. NC 28201-1015 (narme and address of urwdlaSer)
3. Location of installatldn McGuire Nuclear Station, 13225 Hagers Ferry Rd. HWY 73, Huntersville. NC 28078-8985 (name and addre"s)
4. Model No., Series No.. or Type IWAL221LGB3-3XG Drawing CC03986 Rev. E CRN N/A
5. ASME Code, Section III, Division 1: 1998 2000 3 N/A (ecition) (addenda (daisl (Code Case no.)

date)

6. Pump or valve Butterfly Valve Nominal Inlet size 8 Outlet size 8 lIn.) lInj
7. Material:
  • End Cap /

SA193 B8M (a) valve Body SA351 CF8M 'Bonnet SA351 CF8M Disk SA351 CF8M Bolting CL 1 (b) pump Casting Cover Bolting (a) (b) (c) (d) (e) Cert. Narl BodylCasing "BonnetlCover Disk Holder's Board Serial Serial Serial Serial No. No. No. No. No. 05462 /" NIA 05464 D5468 D5466 05469 .-. ' D5467 05463 N/A D5465 

                                                                                                                                                               ýk
                                                                ~~~'~                                     us I2                      1           0Ut4+

I~T 4 L Supplemental information in the form of lists, sketches. or drawings may be used provided (1) size is 8 Yj x 11. (2) information in items I through 4 on this Data Report is included on each sheet. (3) each sheet is numbered and the number of sheets is recorded at the top of this form. This form (E00037) may be obtained from the Order Dept. ASME. 22 Law Drive. Box 2300. Fairfield. NJ 07007-2300-

FORM NPV-1 (Back) -- Pg. 2 of 2 Certificate Holder's Serial No. 05462 through 05463 8 Design conditions 135 psi 150 *F or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 275 psi at 100F
10. Hydrostatic test 425 psi. Disk differential test pressure 305 psi
11. Remarks:

PO No. DP20357, PO Item 0060, Duke Item No. IMV-560 CNI SO No. 28451.06 End Cap Bolts: HL # 150722 Valve supplied with Gear Operator CERTIFICATION OF DESIGN Design Specifications certified by Jesse M. Hawkins P.E. State NC Reg. no. 20159 Design Report certified by N/A P.E. State NIA Reg. no. N/A CERTIFICATE OF COMPLIANCE We certi*fy that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code. Section III. Division 1. N Certificate of Authorization No. N-2899 Expires September 24. 2008 Date August 30. 2006 Name CRANE Nuclear, Inc. Signed IN Cenftate Hol1cg) / . UMWL-.-5 JOM S. GAEngR;; I CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have inspected the pump, or valve, described in this Data Report on August 30. 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code. Section III. Division 1. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection. Date 08130/06 Sign - ed:iý Commissions IL 1005 1IlNan.8d. (ind. ndose*' entS)and Uat, or proy. ad no.) Fred.=v (1) For manually operated valves only. 042

  • I..-,' -

18 -`

FORM NIS-2 OWNER'S REPOR. . -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv 1a. Date January 23, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 F02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1734686 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: NV - Chemical and Volume Control 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Name of Component Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No NV System Duke Power N/A 80 N/A 1982 0 Replaced, [0 Replacement 0 Yes B 0 Repaired, 0 No 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0  Replacement               0   Yes E                                                                                                                                             0   Repaired,                 0 No 0   Replaced,

[0 Replacement 0 Yes F 0l Repaired, 0 No 0 Replaced, 

                                                                                                                                             ]0  Replacement               0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on'this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material in filter trap at flange 2NVFLOO51.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. 0 Other [] Exempt[

Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks Maint functional verified no leakage at system pressure.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the'report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date /-A?_ __ Owner $Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

       /1- 27-70"'7o /               - -: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations andcorrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or, a loss of any kind arising from or connected with this inspection. / Yo---- Seme F Swan Commissions NC1524, N-I SInspector's ,r~ure National Board, State, Province and Endorsements C Date - Page 2 of 2

FORM NIS-2 OWNER'S REPOI-. FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date Aoril 6, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 02 03 DShared (specify Units _
3. Work Performed By: Duke Power Comoany 3a. Work Order #: 1745180 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # N/A

4. (a) Identification of System: NB - Boron Recycle 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME Ill 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-NB-14 Duke Power 20718 N/A N/A N/A 0 Replaced, 1 0 Replacement 0 Yes B 0 Repaired, 03 No 2MCA-NB-14 Duke Power 36856 N/A N/A N/A 0 Replaced, __ Replacement 0 Yes 0 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes D                                                                                                                                              0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes E                                                                                                                                              0  Repaired,                  0 No

[] Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber and mountinci boltinci material.
8. Tests Conducted:Hydrostatic El Pneumatic l] Nom. Operating Press. El Other El Exemptl-Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr.QA Tech Specialist Date "Ownerok6 wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period X*.J 2cYto iL/-7-08 ; and state that to the best of my knowledge and belief, the Owner has performed-examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                        ,                  ome F Swan        Commissions          NC1524, N-I Inspectors     nStipure                                    National Board, State, Province and Endorsements

( Date 2- 0, Page 2 of 2

FORM NIS-2 OWNER'S REPOi. -'OR REPAIR / REPLACEMENT ACTIVITY. As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street. Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1745196 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/.A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: KC - Component Cooling 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI.Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-KC-3030 Duke Power 15122. N/A N/A N/A 0 Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes B                                                                                                                                              0 Repaired,                   0 No 2MCA-KC-3030                 Duke Power                     36877                      N/A                   N/A               N/A      0 Replaced,
                                                                                                                                              ]0 Replacement                0 Yes C                                                                                                                                              0  Repaired,                  0 No 0  Replaced,
                                                                                                                                              ]0 Replacement                0 Yes D                                                                                                                                              0  Repaired,                  0 No 0  Replaced,
                                                                                                                                              ]0 Replacement                0 Yes E                                                                                                                                              0  Repaired,                  0 No 0  Replaced, 0  Replacement                0 Yes F                                                                                                                                              0  Repaired,                  0 No 0  Replaced,

[0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic E. Pneumatic El Nom. Operating Press. El Other 0 Exemptll Pressure psig Test Temp. OF Pressure .psig Test Temp. OF Pressure .psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date . -/v _,-: Owner ef Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of _North Carolina and employed by HSB CT have inspected th components described in this Owner's Report during the period 

        -1:I',4/"9-Y to,3 -/F-0N; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury property damage or a loss of any kind arising from or connected with this 

       /inspection.-
                         - /g**

J[.* - ý"-4erome F Swan Commissions NC1524, N-I Inspector's nure National Board, State, Province and Endorsements 6 Date L.t Page 2 of 2

FORM NIS-2 OWNER'S REPO,. .-OR REPAIR I REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section X1

1. Owner Address: Duke Power Company la. Date March 17, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hacers Ferry Road. Huntersville. NC 28078 2a. Unit: i-1 02 03 E]Shared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 1758578 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: LD - Diesel Generator Engine Lube Oil 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section X1 Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, El No 2LD32 Walworth C59073 576 N/A 1976 0 Replaced, __ Replacement 0 Yes B 0 Repaired, 0 No 

                                                                                                                                             . Replaced, 0 Replacement                 El Yes C                                                                                                                                              D Repaired,                   0 No 0 Replaced, 0_ Replacement                El  Yes D                                                                                                                                             C Repaired,                    0   No 0 Replaced, 0 Replacement                 C   Yes E                                                                                                                                              0 Repaired,                   C   No El Replaced, C Replacement                 C   Yes F                                                                                                                                              0 Repaired,                   0   No 0 Replaced,

_C Replacement 1C Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced bolting material in bonnet.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. IA Other LI ExemptE Pressure psig Test Temp. __ F Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks External leakage performed per task 2 of this work order. No discrepancies found.

(Applicable Manufacturers Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed N _ - FL Grass Jr,QA Tech Specialist Date ___, Owner grOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected th components described in this Owner's Report during the period 

             -/vD- 0 rto --*,/ tr-Q;      and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju or property damage or a loss of any kind arising from or connected with this inspection. ome F Swan Commissions NC1524, N-I Inspector's gature National Board, State, Province and Endorsements Date Page 2 of 2

FORM NIS-2 OWNER'S REPOR. .-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date December 4, 2007 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order# : 1763015-26 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD200464

4. (a) Identification of System: RN- Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section Xl Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Name of Component Col 6 Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-RN-3413 Duke Power N/A N/A N/A N/A 0 Replaced, B 

                                                                                                                                               ]0 Replacement                0 Yes 0 Repaired,                   0 No E0 Replaced, C
                                                                                                                                               ]0 Replacement                0 Yes 0l Repaired,                  0 No 0 Replaced,

[0 Replacement 0 Yes D 01 Repaired, El No o Replaced, E I-] Replacement 0 Yes 0 Repaired, 0 No 0l Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0l Replaced, _0 Replacement 0 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hangqer per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic LI Nom. Operating Press. El Other El Exemptr1 Pressure psig Test Temp. OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \a 1a FL Grass Jr,QA Tech Specialist Date .94L.V2_ Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspe te the components described in this Owner's Report during the period ___ to/Ld/*,/Q,7; and state that to the best of my knowledge and belief, the Owner has performed exam nations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section X1. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inj or property damage or a loss of any kind arising from or connected with this inspection. 91474Jerome F Swan Commissions NC1524, N-I Inspector's i atre National Board, State, Province and Endorsements 6 

      /Datez    V1/7.

Page 2 of 2

FORM NIS-2 OWNER'S REPOR. . OR REPAIR ! REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Comoany 1a. Date January 2, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road. Huntarsville. NC 2807R 2a. Unit: 01 E1-2 03 rJShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1763015-46 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. NIA Expiration Date: N/A PiAntV) 3b. NSM or MM # Aa A

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME I111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 10 No 2MCA-RN-3413 Duke Power N/A N/A N/A N/A 0 Replaced, Rl Replacement 0 Yes B 0 Repaired, C No 0 Replaced, C [0 Replacement C Yes C Repaired, 0 No 0 Replaced, [I Replacement C Yes D 0 Repaired, El No El Replaced, __ Replacement El Yes E E Repaired, El No El Replaced, C Replacement C Yes F C Repaired, C No C Replaced, 10 Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New installed hanger per MOD # MD200464.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptol Pressure _psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -.. ýý4w FL Grass Jr,QA Tech Specialist Date //Z74 .- ,R Owner or Ov{ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by lHSB O,. have inspe te the components described in this Owner's Report during the period 

        ,--,,/'/9 7"to           2o0:;     and state that to the best of my knowledge and belief, the Owner has'pedrformed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 

                      -              .Jerome F Swan        Commissions           NC1524, N-I Inspector'      ature                                     National Board, State, Province and Endorsements Date/  /        2/LZ   9 Page 2 of 2

FORM NIS-2 OWNER'S REPOt,. FOR REPAIR / REPLACEMENT ACTIVITY As. Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 10, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: Mc.Guire Nuclear Station 12700 Haaers Ferry Road. Huntersville. NC 28078 2a. Unit: 01 012 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1763617-32 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD201 471

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0l Repaired, 0l No 2-RN-VA-69 Walworth C59134 637 V-File# 714 1976 0 Replaced, __ Replacement 0 Yes B E Repaired, 0l No 2-RN-VA-69 Crane Nuclear D7265 N/A N/A 2008 El Replaced, 

                                                                                                                                              ]0 Replacement                0 Yes C                                                                                          -l                                                     Repaired,                  El No El Replaced,

_ _._......_ _ E Replacement 0l Yes D El Repaired, El No El Replaced, El Replacement El Yes E El Repaired, El No El Replaced, _E Replacement El Yes F El Repaired, El No 0 Replaced, _E Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. X 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work -Replaced valve.
8. Tests Conducted:Hydrostatic l] Pneumatic [] Nom. Operating Press. [] Other El ExemptO Pressure 100 psig rest Temp. ' 74 °F Pressure psig - rest Temp. OF Pressure .psig rest Temp. OF
9. Remarks Functional performed per task 32.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed \ FL Grass Jr,QA Tech Specialist Date 8/*8 Owner or'Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period Z -/0 - 0 9to S o-- OF; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this 

        *spection..

erome F Swan Commissions NC1524, N-I spetor's Srture National Board, State, Province and Endorsements ( Page2 of 2

05/08/08 THU 09:05 FAX QA LAB [a 002 FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES' As Required by the Provisions of the ASME Code, Section III, Division 1 Pg. 1 of 2

1. Manufactured and certified by CRANE Nuclear, Inc.. 860 Remington BoIlevard. Bolingbrook, IL 60440 (name and addresD of N CertiilcAli iOwer)
2. Manufactured for Duke Energy Corporation, PO Box 1006. Charlotte, NC 28201-1015 (name ana o4nr4= or purrhase')
3. Location of installation McGulre Nuclear Station, 13225 Hagers Ferry Rd. HWY 73. Huntersvllle. NC 26078.8985 J (name an eddress)
4. Model No., Series No., or Type 5202-WE-SPL Drawing CC04304 Rev. C! CRN N/A
5. ASME Code. Section III, Division 1. 1998 2000 2 1 --

(adluon? (addanda date) (clasa) (CodeC=a. no.)

6. Pump or valve Gate Valve Nominal inlet size 8" Outlet size all
7. Material:

SA193 B7 (a) valve Body SA216 WCB Bonnet SA216 WC8 Disk SA351 CFSM Bolting SA194 2H " (b) pump Casting Cover Bolting (a) (b) (c) (d) (e) Cert. Nat'l Body/Casing Bonnet/Cover Disk Holder's Board Serial Serial Serial Serial No. No. No. No. No. 0_7265 L-' N/A D720277 D7214 D72"118 721 A- , n 3:ý Supplement*aIinformition in the form of iist, tketcher. or drawing~s may be ussed provided (1) size 138 Ys4x 11, (2) Informaetion In Items 1 through 4 on this Data Report Ir Included on each sheet. (3) each sheet Is numbered and the number of sheet.is recorded ai the top of this form-This form (E00037) mey be obtained from the Order Dept- ASME. 22 Law Drive. Box 2300, Fairfield. NJ 07007-2300.

0001 .05/08/08 TH-I 09:06 FAX QA LAB FORM NPV-1 (Back) --- P9. 2 of 2 Certificate Holder's Serial No. 07265 8 Design conditions 135 psi 05 'F or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 285 L// psi at 10oF
10. Hydrostatic test 450 psi. Disk differential lest pressure 315 psi psi

__.BRemaks: Bopnne Stud G BHr. #:d2031 H42 BonnetStPi u eanClods: A105 Hr.#E723 315 /i" By-Pass Piping, SA106 GR B. Ht. #, 203614vtBy-Pass Piping Elbows: SA1 05. Ht. 9; 77230 - By-Pass Piping Valve S/N:, 071171-13 PO No. 00091378 PO Item # 0003, Duke Item 020-839 ýs'~ CNI S/0 31 377-01 CERTIFICATION OF DESIGN Design Specifications certified by James Lamb, Jr. V"/ P.E. State NC Reg. no. 6005 Design Report certified by NIA P.2. State N/A Reg. no. N/A CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Cods, Section II1,Division 1. N Certificate of Authorization No. N-2899 Expires - September 24, 2008 Date 03107/08 Name CRANE Nuclear. Inc. J Signed 

                                                                                                      ' /

1 /r -/ . onler v I ,PE. i y . ,as -nck Sr. Ouolliy Aesur~fnce EnlgIneor (N Ceroflcate NHoIer) CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have inspected the pump. or valve, described in this Data Report on March 7. 2008 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code, Section Ill. Division 1, By signing this Certificate, neither the inspector nor his employer makes any warranty, exprossed or implied, concerning the component described In this Data Report. Furthtermore, neither the Inspector nor his employer shall be liable in any manner fc z any personal Injury or property damage or loss of any kind arslng from or connected with this inspection. Commissions Illinois 1005 

                                                                                            .     (NeF l d. (lnol. endo'samems) and ahto orprov 4nd
                                                                                                                                                                  .A 190606B

FORM NIS-2 OWNER'S REPOh, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Companv la. Date 03/26/2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haaers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 0]2 03 OShared (specify Units )
3. Work Performed By: Duke Power Company 3a. Work Order # : 01763617-60 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD20147D

4. (a) Identification of System: RN Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, [ENo 2-MCA-CA-5625 Duke Energy N/A N/A Hanger N/A 0 Replaced, _ _ _Replacement 0 Yes B 0 Repaired, [I No 0 Replaced, 

                                                                                                                                             ]0 Replacement                 r  Yes C                                                                                                                                             0 Repaired,                    0] No 0 Replaced,

[0 Replacement 0 Yes D 0 Repaired, 0 No 

                                                                                 "-            - ,-0                                            Replaced, El Replacement                 0  Yes E                                                                                                                                            0 Repaired,                    0 No 0 Replaced,
                                                                                                                                             ]0 Replacement                 C  Yes F                                                                                                                                            0 Repaired,                    0 No 0 Replaced,

[0 Replacement 10 Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Added Item 12, 1/2 Plate Per MD20147D
8. Tests Conducted:Hydrostatic El Pneumatic [] Nom. Operating Press. [1 Other OiExempt-Zi Pressure .psig Test Temp. OF Pressure -psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of. Authorization No. N/A Expiration Date N/A Signed t,," F.R. Sorrow.QA Tech Support Date 03/26. 2008 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

         '-       -o2- 8to               03. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injuror property damage or a loss of any kind arising from or connected with this inspection.0n/ 

                                -. ,I-*r-JeromeF Swan          Commissions           NC1524, N-I Inspector's Sign "ure                                        National Board, State, Province and Endorsements 6     Date3             --.7 Page 2 of 2

FORM NIS-2 OWNER'S REPO, FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date Aoril 14, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haners Ferry Road. Huntersvillep NC 28078 2a. Unit: 01 02 103 OShared (specify Units "_)
3. Work Performed By: Duke Power Companv 3a. Work Order #: 1764228-32 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD201471

4. (a) Identification of System: CA - Auxiliary Feedwater 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section X1 Utilized for Repair Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Name of Component Col 6 Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamp'ed Installed (yes or no) A 0l Repaired, El No 2CA-VA-86 Walworth C61561 677 V File# 781 1976 0 Replaced, __ Replacement 01 Yes B El Repaired, 0 No 2CA-VA-86 Crane D7264 N/A N/A 2008 0 Replaced, 

                                                                                                                ..                            0 Replacement                 E0 Yes C
                                                                                                                                              *Repaired,                    0l No El Replaced,

[] Replacement 0l Yes D 0 Repaired, 0l No El Replaced, E _ Replacement El Yes 0l Repaired, El No 0 Replaced, El Replacement El Yes F 0l Repaired, 0 No El Replaced, 0] Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Cut out and replaced valve.
8. Tests Conducted:Hydrostatic E] Pneumatic 0 Nom. Operating Press. I] Other LI Exempt[]

Pressure 62 psig Test Temp. 60 OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks Functional performed per task 32.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -, ,,4w2n FL Grass Jr,.QA Tech Specialist Date , 2 Owner orOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT hay~e inspected tlq components described in this Owner's Report during the period _-J-~to . .  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inju r propertydamage or a loss of any kind arising from or connected with this inspection. J 

      ,-,---=-'ome                               F Swan       Commissions           NC1524, N-I Inspector's i n ure S                                                            National Board, State, Province and Endorsements Date.I.*-       &,

Page 2 of 2

05/08/08 THU 09:04 FAX , ALAB FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES* As Required by the Provisions of the ASME Code, Section III, Division I Pg. 1 of 2

1. Manufactured and certified by CRANE Nuclear, Inc.. 860 Remington Boulevard, Bolingbrook. IL 60440 V'

(,~amo naO addfea5 of" N Co.1flCBI0 Nolder)

2. Manufactured for Duke Energy Corporation, P0 Box 1006, Charlotte. NC 2M201-1015 (na.me end eddrvgs of ptvrchaso)
3. LocatIon of installation McGulre Nuclear Station. 13225 Hagers Ferry Rd. HWY 73. Huntersville, NC 28078-8985 V (nome and addraes&)
4. Model No., Series No., or Type 5202-WE-SPL Drawing CC04304 Rev. C CRN N/A
5. ASME Code, Section iII,DivIsion 1: 1998 2000 2 -

(edition) (addends deIe) (claes) (Coda Case no.)

6. Pump or valve Gate Valve Nominal Inlet size a".,___ Outlet size _"
7. Materlal; SA193 87" (a) valve Body SA216 WCBV-/ Sonnet SA216 WC0 /V' Disk SA351 CFrMwv" BoIltIng SA194 2H ,

(b) pump Casting Cover Boiling - (a) (b) (c) (d) (e) Cert. Nat'l Body/Casing Bonnet/Cover Disk Holders Board Serial Serial Serial Serial No. No. No. No. No. D7264 / N/A D7201 v 07215 V 07217 

  -Supplemental info~rmation in che formnof ll5Wt.sketchers, or drawings may be used provldcd (1) size is 6 Y2 x 11, (2) Informsflon In fterns I unrough 4 on this Dita Report is Included on each shael- (3) each sPeet Is nrunibarod 3nd the number of sheets is recorded ai the top of this form, This form (E00037) may be obtained from the Order DePL ASME, 22 Law Drie, Box 2300. FnIrfield. NJ 07007.2300.

QA LAB [a002 05/08/08 THU 09:06 FAX FORM NPV-1 (Back) -- Pg. 2 of 2 Certificate Holder's Serial No. 07264 I/ a Design conditions 135 psi / 95 OF or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 285 ,/ psi at 100°F
10. Hydrostatic test 450 ./ psi. Disk differential test pressure 315 psi
11. Remarks: Bonnet Stud Heat Code: 1H62:/:-.,Donnet Stud Nut Heat Code: 1 H65 BY-Pass Piping; SA106 GR B. HL #: 203644Y'By-P~ass Pipin2 Elbows: SA105. HI. #: 77230 "

By-Pass Pioino Valve SIN: 071171-12 ,,' EIV-Pass PiGirtc, Valve S/N: 071171-12 v-' PO No. 00091378 PO Item # 0003, Duke Item 02B-839 V' CNI S/0 31377-01 CERTIFICATION OF ODSIGN Design Speclflcatlons cartified by James Lamb, Jr. P.E. State NC Reg, no. 6005 Design Report certified by N/A P.E. state N/A Reg. no. N/A CERTIFICATE OF COMPLIANCE We cerUfy thai the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code, Section III, Division 1. N Certificate of Authorization No. N-2899 Expires . September 24, 2d08 Date 03/10/08 Name CRANE Nuclear, Inc. Signed (N Cta.iflcste Holder) CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have inspected the pump. or valve, described in this Data Report on _March 10, 2008 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code. Section IIl. Division 1. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, conceming the component described in this Data Report Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected with this Inspection-Date 03/10/08 Signed Commissions Illinois 1005 (Nall 13d.(inc. endoftementlw lewd staetf or oov. anedno.) 10

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company 1a. Date February 25, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1785753 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: MD100461

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME Il11971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Name of Component Col 6 Column 7 Column 8 Name of Mfg Mfg Serial.No. National Board No. 'Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2RN404 Crane D5481 N/A Utc# 1819769 2006 0 Replaced, 0 Replacement 21 Yes B 0 Repaired, 0 No 2RN409 Crane D5894 N/A Utc# 1832819 2006 0 Replaced, 0 Replacement 0 Yes C 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes E 0 Repaired, 0 No 0 Replaced, 0 Replacement 0] Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                              ]0 Replacement               0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work_ Added pipingq and new valves 2RN404 and 2RN409 per MD 100461.
8. Tests Conducted:Hydrostatic El Pneumatic EJ Nom. Operating Press. 0 Other El Exemptl Pressure 62 psig Test Temp. 63 OF Pressure psig Test Temp. _ OF Pressure psig Test Temp. _ OF
9. Remarks Test Derformed Der Drocedure MP/O/A/7650/076.

(Applicable Manufacturer's Data Reports to be attached) CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass Jr,QA Tech Specialist Date oýwner rowner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 1-2 -3

  • to Z- .- a, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury r property damage or a loss of any kind arising from or connected with this fnspection. / erome F Swan Commissions NC1 524, N-I anspectoes Si.r ure National Board, State, Province and Endorsements 6 SDate 01 a. zO Page 2 of 2

FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES. 

                           ýs Required by the Provisions of the ASME Code, Section III, Division 1
   *Corrected NPV-1                                                                                                                              Pg. 1 of 2
1. Manufactured and certified CRANE Nuclear, Inc., 860 Remington Boulevard, Bolingbrook. IL 60440 by (name and address ofN Certificate Hdde)
2. Manufactured for Duke Energy Corporation, PO Box 1006, Charlotte, NC 28201-1015 (name and address of Purchaser)
3. Location of installation McGuire Nuclear Station. 13225 Ilagers Ferry Rd. HIWY 73, Huntersville, NC 28078-8985 (na*ne and address)
4. Model No., Series No., or Type 47-1/2UF-SPL Drawing CC03984 Rev. C CRN N/A
5. ASME Code. Section III, Division 1: 1998 2000 N(A (edidtio) (addenda (class) (Code Case no.)

date)

6. Pump or valve Gate Valve Nominal inlet size 6 Outlet size 6 (in.) (in.)
7. Material:

SA193 B8M (a) valve Body SA351 CFBM -- Bonnet SA351 CF8M Disk SA351 CF8M - Bolting SA194 8M (b) pump Casting _______ Cover Bolting n oer (a) (b) (c) (d) (e) Cert. Nat'l Body/Casing Bonnet/Cover Disk Holder's Board Serial Serial Serial Serial No. No. No. No. No. 05481 ' N/A 05406 /" 05412 05420 N

  • Supplemental infornmation in the form of lists, sketches. or drawings may be used provided (1) size is 8 A x I1. (2) information in items I through 4 on this Data Report is included on each sheet. (3) each sheet is numbered and the number of sheets is recorded at the top of this loan.

This form (E00037) may be obtained from the Order Dept. ASME. 22 Law Drive. Box 2300. Fairfield. NJ 07007.2300.

FORM NPV-1 (Back) --- Pg. 2 of 2 Certificate Holder's Serial No. 05481 8 Design conditions 135 psi 150 *F or valve pressure class (1) (pressure (temperature)

9. Cold working pressure 275 psi at 100°F
10. Hydrostatic test 425 psi. Disk differential test pressure 305 psi
11. Remarks: 'Corrected P.E. first name from James to Jesse.

PO No. DP20357, P0 Item 0040. Duke Item No. 1MV-556 CNI SO No. 28451-04 CERTIFICATION OF DESIGN Design Specifications certified by *Jesse M. Hawkins P.E. State NC Reg. no. 20159 Design Report certified by N/A P.E. State NIA Reg. no. NIA CERTIFICATE OF COMPLIANCE We certify that the statements made in this report ar&correct and that this pump or valve conforms to the rules for construction of the ASME Code, Section III. Division 1. N Certificate of Authorization No. N-2899 Expires September 24, 2008 Date 08109/06 Name CRANE Nuclear, Inc. Signed (N Cenficale Holder) i t/(Joseph FfH.I OA Engneer CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of Illinois and employed by HSBCT of Hartford, CT have.inspected the pump, or valve, described In this Data Report on August 09, 2006 and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code, Section III, Division 1. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the component described in this Data Report; Furthermore.'nelther the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected with this inspection. Date 08/09/06 Signed

  • 2 "Q Commissions IL 1903 a) qNatt ad. Ond.erdoers.vwts) and stle or pri. and no.)

ll~o;ýTd ýard (1) For manually operated valves only.

FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES* As Required by the Provisions of the ASME Code, Section III, Division 1 Pg. 1 of 2

1. Manufactured and certified CRANE Nuclear, Inc., 860 Remington Boulevard. Bolingbrook, IL 60440 by (name and addreSS o0N Certiticale Hoidef)
2. Manufactured for Duke Energy Corporation, PO Box 1006, Charlotte, NC- 28201-1015
3. Location of installation /McGuire Nuclear Station. 13225 Hageri Fern Rd. HWY 73, Hunfersville, NC 28078-8985 (name and address)
4. Model No.. Series No.. or Type 47-1/2UF-SPL Drawing CC04072 Rev. B CRN NIA
5. ."ASME Code. Section I1l.Division 1: 1998 3 N/A
                                                             '(edfion)                                                           (class)              (Code C'ase no.)

dale) 6, Pump or valve 7 Gate Valve Nominal inlet size 6 (in.) Outlet size 

                                                                                                                                                   -<<6 (in.)
7. Malerial:

A193 87 (a) valve Body ,/SA216 WCB Bonnet v/SA216WCB Disk /I'SA35t CF8M Bolting ,:SA194 2H2 

         -01) pump       Casting                             Cover                                   Bolting (b)                             (c)                               (d)                                (e)
       ,        Cert.                            Nat'l                     Body/Casing                       Bonnet/Cover                             Disk
         -   Holder's                           Board                           Serial                            Serial                              Serial
       . -erial No.                              No.                             No.                                No.                                No.

N/A 1' 05896 Y' D5908 -'05916 N/A ..., 05897 V g5909 o-,_ D5917 N/A ', 05898 ,,_5910 _.O5918 NA 5899 0D59119 J. 87zzz+/-3 12+/-S(8 4 V X, nation in items I through 4 on 

 . Supplemental information in Ithe form oflists. sketches, or drawings may be used provided (1) size is 8 1Ax 11,(2) Inforr this Data Report is included on each sheet. (3) each sheet is numbered and the number of sheets Is recorded at the top of thiasform.

This form (E00037) may be obtained from the Order OepL ASME. 22 Law Drive. Box 23300. Fairuield, NJ 07007-2300.

FORM NPV-1.-(Back).---Pg. 2 of.2." Ce ficteiteHolder's .Serial No. /D5692 through 05895 6 Design conditions . 135 . psi V 95: *F 'o.-valve,pressure dass (1) (pressure " (temperature)1*.. ..

9. Cold workingpessure V 285. psi at.100,*'F: . ..
10. Hydrostatic.test .. o-. 450.- - psi.. Disk diffe er~et~ialtest pressure . V# 315 psi
        .- " PO No..000i6ý7, PO item 0007, Duke item No....MV-565                            .

CNI SýNb, 2940l-01 

         -. ",oltirigtýtuds      Ht. # 230113/Nuts Ht. # B87035 4   :Designv Specificationscertifted b
 ,Design Report certified by-...

Jesse M. Hawkins CERTIFICATION OF DESIGN NIA P.E. State NC P.E. State .;:N/A.,: Reg..no. Reg. no. .20159 NIA "*! " CERrtF.ICAa. f05- COMPLIlA C.. V.,,.a crniy that the. its made in this report.are.correcv and ,that ihis pump or valve contorms to U! rules tor construction de.,SME cl e Cod.e S;-*zs .. :Division 1: i.ijfificae 01i -r , iNo. N,2899 .... Expires Septeamer 24, 2008: 4~t ~ J2/f V 2 rCRANE sr~e ciearl i~Ce1rizt4~zeq*.. Jon..,re 

                                                                                                                                      -ij    . S. A    niee,'
                                                                 -'T     F ICATE. OFNSPECT40                    -O '.:         *
.1 he:Ut*ersigned, holding a v~lid~commissio~iis~u by                              Na~otat.oNoad or Bt)'itro'ediiPssefreessel Inspectorsa rnd the                               VA..

S-late or Proyince of Illinois and employed by . ,- HSB.CT. Hartford. CT '3ve inspectedihe pump,,or,,valve, 0 aed in tttii :*port;e Deremt*'r .2006, and state that to the best of my knowledge and belief, ".Cert&ra*.ýl4der ha-ore*tN4~umpor valve. in accordance 

   -vhh the ASME Codc,,-Secbon Ill. Division 1.

By.;rWing this Certificate.. neither ~Ihe IrL~pector nor his~o ployer m;,akvq.4riy wan-anty.jxo ex~ q~ wir-n-ptd the Iocrnn 

      ~~¶~pinen desdb inthis Data.4eot                                       neie an~e               p~or                    e ll r 00a be liable scr~hs                      in sny Manner     for
 ;aypen-mrial injury o( property, r1amage.,onlass o                      ldosn ~.               ,o         catAit2I~s~ln I/

2/27/06ýk4iecl 2 (1) For rc"nntieiy operatedcl'aves only. 

                                                                          *           ~
                                                                                     .... 'A   -.

                                                     ý"FORM NIS-2 OWNER'S REPOR. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code ,Section XI
1. Owner Address: Duke Power Company.

la. Date March 25, 2008

.-526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 1,
                           ,12700 Haaers Ferr Road, Huntervile, NC 28078 2a. Unit: 01          02' 103       OShared (specify Units 3.Work. Perfrme   . y DuePwr oon
3. Work Performed .By:.:' ,Duke Power Company 3a. Work Order-# : 1801758 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: KC - Component Cooling 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair/ Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components: .-

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component . Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped 

                                        -__Installed (yes or no)

A 0 Repaired, 10 No 2MCA-KC-3332 Duke Power 3617 N/A N/A N/A 01 Replaced, 0 Replacement 0 Yes B 0 Repaired, 01 No 2MCA-KC-3332 Duke Power' 017 N/A N/A N/A 0 Replaced, [0 Replacement 0 Yes c 0 Repaired, 0 No 

                                                                                                                                                 " Replaced,

___,_. 0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes E .0 Repaired, 0 No 0 Replaced, [0 Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0 Replacement                0   Yes
                                                                                                                                                                                          .Page I of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of. Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic El Nom. Operating Press. El Other El Exemptl--

Pressure psig Test Temp., _F Pressure _psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed FL Grass JrQA Tech Specialist Date 6wner w wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of: North Carolina and employed by. HSB CT have inspected the components described in this, Owner's Report during the period S.:%-i7/" - toi -*'; and state that to the. best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 1=50 )ý"Jerome F Swan Commissions NC1524, N-I inspector's Sig-ture National Board, State, Province and Endorsements 

                              -. % -1C uate..:._ - gS=?

Page 2 of 2

FORM NIS-2 OWNER'S REPOR. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Company la. Date April 6. 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 102 03 rOShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1801841 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/.A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME II1 19711 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair /Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No.. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2MCA-RN-3019 Duke Power 3128 N/A N/A N/A 0 Replaced, I 1 0 Replacement 01 Yes B .0 0 Repaired, 0 No 2MCA-RN-3019 Duke Power 8515 N/A N/A N/A 0 Replaced, 

                                                                                                                                                 ]0 Replacement                0 Yes C                                                                                                                                                 0 Repaired,                   0 No 0 Replaced,
                                                                                                                                                 ]0 Replacement                [0 Yes D                                                                                                                                                 0  Repaired,                  0 No 0  Replaced,
                                                                                                                                                 ]0 Replacement                [I Yes E                                                                                                                                                 0  Repaired,                  C No 0  Replaced, 0  Replacement                C Yes F                                                                                                                                                 C3 Repaired,                  0 No C Replaced,
                                                                                                                                                 ]0 Replacement                0   Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic El Pneumatic E- Nom. Operating Press. El Other El Exempt-Z Pressure -psig Test Temp. _ OF Pressure _ _ psig Test Temp. OF Pressure _________psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed Ž*-\i**Z4-L Grass Jr,QA Tech Specialist Date -v' 4e-p2.wa3 Owwer or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3r*3.2 ly-c o 5:' 20Z, 7- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal. injury or property damage or a loss of any kind arising from or connected with this inspection. Lnspet-or-uerome F Swan Commissions NC1524, N-anspectoe ature National Board, State, Province and Endorsements Datea Page 2 of 2

FORM NIS-2 OWNER'S REPOR. ,-OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl

1. Owner Address: Duke Power Company la. Date 04/04/2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Haqers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 E12 03 DShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order # : 01802868 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date:* N/A 3b. NSM or MM #: MD201740

4. (a) Identification of System: RN Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity:* 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0" Repaired, 13 No Piping Duke Energy N/A 60 2RN 1982 0l Replaced, 1__Replacement ElYes B El Repaired, El No El Replaced, [] Replacement 0 Yes C El Repaired, El No O Replaced, 0 Replacement [] Yes D 0] Repaired, 0l No 0 Replaced, 0l Replacement El Yes E El Repaired, El No El Replaced, _E Replacement El Yes F E Repaired, El No El Replaced, __ Replacement El Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Added 2" piping per MD201740, Welds RN2FW57-12,13,16, 17 &

RN2FW13-6, 7,8,9, 10

8. Tests Conducted:Hydrostatic Li Pneumatic LI Nom. Operating Press. El Other LiExemptFI Pressure *101.1 psig Test Temp. *56 OF Pressure **101.1 psig Test Temp. **56.2 OF Pressure psig Test Temp. °_OF
9. Remarks *Task 09 for valve 2RN-1072 at 101.1 psici & 56 'F- RN2FW57-12,13,16,17.
   **Task 12 for valve 2RN-1073 at 101.1 psiq & 56.2 OF- RN2FW13-6,7,8,9,10 (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A " Expiration Date N/A Signed F.R. Sorrow,QA Tech Support Date 04/04, 2008 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 

                 -- OR to ý,- Y- OR'; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section X1.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Sinspection,., n,&I-e / . rome F Swan Commissions NC1524, N-I 

     /   Inspector's Signature                                    National Board, State, Province and Endorsements SDate     /-t/        "*0l

( Page 2 of 2

FORM NIS-2 OWNER'S REPOR. . OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany la. Date March 27, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 1"02 0-3 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1802998 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/A Expiration Date: N/A 3b. NSM or MM # MD201697

4. (a) Identification of System: RN - Nuclear Service Water 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME 1111971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg Mfg SerialNo. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A 0 Repaired, 0 No 2-RN-VA-285 BNL A981103-4-21 N/A N/A 2000 0 Replaced, 0 1] Replacement 0 Yes B 0 Repaired, 0 No 2-RN-VA-285 BNL A981103-4-13 N/A N/A 1999 0 Replaced, 

                                                                                                                                                 ]0  Replacement               0   Yes C                                                                                                                                                 0 Repaired,                   0 No 0 Replaced,

[0 Replacement 0 Yes D 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0  Replacement               0   Yes E                                                                                                                                                 0   Repaired,                 0 No 0   Replaced,

[] Replacement 0 Yes F 0 Repaired, 0 No 0 Replaced, 

                                                                                                                                                 ]0  Replacement               0l Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced valve
8. Tests Conducted:Hydrostatic [] Pneumatic El Nom. Operating Press. l] Other El Exemptl Pressure _psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks functional performed on task 06 per procedure MP/O/A/7700/045 (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed "* 4W- FL Grass JrQA Tech Specialist Date ".' __ Owner oirOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected the components described in this Owner's Report during the period 3- tJ-6,' to q- 0-8; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed 

       .or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

erome F Swan Commissions NC1524. N-I Inspector's'Sidnature National Board, State, Province and Endorsements M Date L l -'/ n Page 2 of 2

FORM NIS-2 OWNER'S REPOh. . -OR REPAIR / REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI

1. Owner Address: Duke Power Companv la. Date April 7, 2008 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 1
2. Plant Address: McGuire Nuclear Station 12700 Hagers Ferry Road, Huntersville, NC 28078 2a. Unit: 01 02 03 OShared (specify Units
3. Work Performed By: Duke Power Company 3a. Work Order #: 1805056 Address: 526 S. Church Street, Charlotte NC 28201-1006 Repair Organization Job #

Type Code Symbol Stamp: N/A Authorization No. N/_.A Expiration Date: N/A 3b. NSM or MM #: N/A

4. (a) Identification of System: CA - Auxilary Feedwater 4. (b) Class of System: C
5. (a) Applicable Construction Code: ASME III 1971 Edition, Summer and Winter Addenda, N/A Code Cases (b) Applicable Edition of Section XI Utilized for Repair / Replacement Activity: 1998, 2000 Addenda (1998 through 2000 Addenda for Class MC and CC and their supports)
6. Identification of Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Col 6 Name of Component Column 7 Column 8 Name of Mfg Mfg Serial No. National Board No. Other Identification Year Built Corrected, Removed, or ASME Code Stamped Installed (yes or no) A P0 Repaired, RI No 2MCA-CA-128 Duke Power 112 N/A N/A N/A 0l Replaced, 

                                                                                                                                               ]0  Replacement               0   Yes B                                                                                                                                               0   Repaired,                 0 No 2MCA-CA-128                  Duke Power                    20375                       N/A                   N/A               N/A      [0  Replaced, Rl Replacement                0] Yes C                                                                                                                                               0] Repaired,                  [] No

[] Replaced, 

                                                                                                                                               ]0 Replacement                0   Yes D                                                                                                                                               ]0 Repaired,                  0 No 0 Replaced, E                                                                                                                                               0   Replacement               0 Yes 0]  Repaired,                 [] No

[I Replaced, 0] Replacement 0] Yes F[0 Repaired, 0] No [] Replaced, [] Replacement 0" Yes Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced snubber.
8. Tests Conducted:Hydrostatic LI Pneumatic LI Nom. Operating Press. LI Other El Exemptl-Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF
9. Remarks (Applicable Manufacturer's Data Reports to be attached)

CERTIFICATE OF COMPLIANCE I certify that the sttements made in the report are correct and this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed -*,/,* 4' FL Grass Jr,QA Tech Specialist Date 4' 7 .t 

                      ' Owner qorwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT have inspected tlIpcomponents described in this Owner's Report during the period i          to Y- 7 -6 '    and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for 94ei 4 any personal injury or property damage or a loss of any kind arising from or connected with this inspection.. _ Jerome F Swan Commissions NC1524, N-I Insvector's Sdnature National Board, State, Province and Endorsements I Page 2 of 2

6.0 Pressure Testing FirstPeriod- Third 1O- Year Interval All system pressure test requirements have been satisfied for the First Inspection Period. Some pressure test zones were completed after EOC 17 but prior to March 1, 2007, the date ending the First Period. Those pressure test zones credited for the First Period which were not listed in the Summary Report for EOC 17 are shown in Table 6-1. Table 6-1 Detailed Class 2 - Ist PeriodZones Not Listed in EOC17 Report VT-2 Examination Zone Number Boundary Dwg Completion Status Date 1 2BB-040L-B MC-ISIL-2580-01.00 1 st Period Complete 2/22/2007 2 2CA-040L-B MC-ISIL-2592-01.00 Ist Period Complete 212112007 3 2CA-043L-B MC-ISIL-2584-01.00 1 st Period Complete 2/22/2007 MC-ISIL-2591-01.01 1t Period Complete 2/22/2007 MC-ISIL-2592-01.00 1 st Period Complete 2/22/2007 MC-ISIL-2617-01.00 1 st Period Complete 2/22/2007 4 2FW-007L-B MC-ISIL-2554-03.00 1 st Period Complete 1/9/2007 MC-ISIL-2554-03.01 1 st Period Complete 1/9/2007 MC-ISIL-2561-01.00 1st Period Complete 1/9/2007 MC-ISIL-2562-03.00 1 st Period Complete 1/9/2007 MC-ISIL-2563-01.00 1 St Period Complete 1/9/2007 MC-ISIL-2571-01.00 1 st Period Complete 1/9/2007 5 2ND-009L-B MC-ISIL-2554-01.02 1t Period Complete 1/17/2007 MC-ISIL-2561-01.00 1st Period Complete 1117/2007 MC-ISIL-2562-03.00 Ist Period Complete 1/17/2007 MC-ISIL-2562-03.01 1 st Period Complete 11/4/2006 MC-ISIL-2563-01.00 1st Period Complete 1/17/2007 MC-ISIL-2571-01.00 1 Period Complete 1/17/2007 MC-ISIL-2572-01.00 1 st Period Complete 1/17/2007 6 2ND-01OL-B MC-ISIL-2561-01.00 1 st Period Complete 12/6/2006 MC-ISIL-2562-03.01 1 st Period Complete 12/6/2006 MC-ISIL-2563-01.00 I st Period Complete 12/6/2006 7 2NI-015L-B MC-ISIL-2562-03.00 1 st Period Complete 1/16/2007 8 2NI-016L-B MC-ISIL-2562-03.00 1st Period Complete 2/4/2006 EOC 18 / Outage 3 Page 1 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

VT-2 Examination Zone Number Boundary Dwg Completion Status Date 9 2NI-017L-B MC-ISIL-2562-03.00 1 Period Complete 1/16/2007 MC-ISIL-2562-03.01 1st Period Complete 1/16/2007 10 2NI-018L-B MC-ISIL-2562-03.01 1 st Period Complete 1/16/2007 11 2NI-061L-B MC-ISIL-2562-01.00 1st Period Complete 1/30/2007 12 2NI-062L-B MC-ISIL-2562-01.00 1st Period Complete 1/30/2007 13 2NM-027L-B MC-ISIL-2572-03.00 1st Period Complete 2/21/2007 14 2NS-019L-B MC-ISIL-2563-01.00 1 st Period Complete 1/15/2007 15 2NV-003L-B MC-ISIL-2554-01.00 1t Period Complete 21/21/2007 MC-ISIL-2554-01.01 1 st Period Complete 2/21/2007 MC-ISIL-2554-01.02 1st Period Complete 2/21/2007 MC-ISIL-2554-01.03 Ist Period Complete 11/8/2006 16 2NV-005L-B MC-ISIL-2554-01.02 1 st Period Complete 11/8/2006 17 2RN-044L-B MC-ISIL-2574-04.00 1 st Period Complete 121/82007 18 2SA-047L-B MC-ISIL-2593-01.02 1 st Period Complete 2/22/2007 19 2SM-040L-B MC-ISIL-2591-01.01 1 st Period Complete 2/21/2007 MC-ISIL-2593-01.00 1st Period Complete 2/21/2007 MC-ISIL-2593-01.03 1 st Period Complete 2/21/2007 EOC 18 / Outage 3 Page 2 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

Second Period- Third 10-Year Interval Table 6-2 shows the number of Class 1 (Category B-P), Class 2 (Category C-H), and Risk Informed Segment (Category R-A) pressure tests zones completed from refueling outage EOC-17 through refueling outage EOC-18. There was no through-wall leakage observed during these pressure tests. Table 6-2 Outage Specific Summary Examination Category Test Requirement Total Zones Completed EOC18 B-P System Leakage Test (IWB-5220) 1 C-H System Leakage Test (IWC-5220) 3 R-A Risk Informed VT-2 for Socket Welds 66 Segments Table 6-3 shows a completion status for the number of pressure test zones conducted during the second period bf'the third ten-year interval. Table 6-3 Second PeriodSpecific Summary Total Zones Total Zones (%) Zones Examination Test Requirement Required For Credited For Complete For Category This Period This Period This Period B-P System Leakage Test 3 1 33.33 % (IWB-5220) C-H System Leakage Test 34 3 8.82 % (IWC-5220) R-A System Leakage Test (66 Segments 66 33.33 % Each Refueling Outage) 198 For Period EOC 18 / Outage 3 Page 3 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

The Class 1 (Category B-P) pressure test zone is required each refueling outage. Table 6-4 shows a completion status of the Class 1 (Category B-P) pressure test zone conducted during refueling cycle EOC18. Table 6-4 Detailed Class 1 Listing EOC18 Zone Completion Number Boundary Dwg Status EOC18 VT-2 Examination Date 2NC-001 L-A MC-ISIL-2553-01.00 Complete 4/10/2008 MC-ISIL-2553-02.00 Corn plete 4/10/2008 MC-ISIL-2553-02.01 Complete 4/10/2008 MC-ISIL-2554-01.00 Complete 4/10/2008 MC-ISIL-2554-01.01 Complete 4/10/2008 MC-ISIL-2554-01.02 Complete 4/10/2008 MC-I SIL-2561-01.00 Complete 4/10/2008 MC-ISIL-2562-01.00 Complete 4/10/2008 MC-ISIL-2562-02.00 Complete 4/10/2008 MC-ISIL-2562-02.01 Complete 4/10/2008 MC-ISIL-2562-03.00 Corn plete 4/10/2008 MC-ISIL-2562-03.01 Corn plete 4/10/2008 Class 2 (Category C-H) pressure test zones are required once each inspection period. Table 6-5 shows a completion status for the Class 2 (Category C-H) pressure tests required for the second period of the third ten-year interval. Table 6-5 Detailed Class 2 Second PeriodListing VT-2 Examination Zone Number Boundary Dwg Completion Status Date 1 2BB-040L-B MC-ISIL-2580-01.00 Not Yet Tested N/A 2 2BB-074L-B MC-ISIL-2572-03.00 Not Yet Tested N/A MC-ISIL-2580-01.00 Not Yet Tested N/A MC-ISIL-2584-01.00 Not Yet Tested N/A 3 2CA-040L-B MC-ISIL-2592-01.00 Not Yet Tested N/A 4 2CA-043L-B MC-ISIL-2584-01.00 Not Yet Tested N/A MC-ISIL-2591-01.01 Not Yet Tested N/A MC-ISIL-2592-01.00 Not Yet Tested N/A MC-ISIL-2617-01.00 Not Yet Tested N/A EOC 18 / Outage 3 Page 4 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

VT-2 Examination Zone Boundary Dwg Completion Status Date 5 2FW-007L-B MC-ISIL-2554-03.00 Not Yet Tested N/A MC-ISIL-2554-03.01 Not Yet Tested N/A MC-ISIL-2561-01.00 Not Yet Tested N/A MC-ISIL-2562-03.00 Not Yet Tested N/A MC-ISIL-2563-01.00 Not Yet Tested N/A MC-ISIL-2571-01.00 Not Yet Tested N/A 6 2ND-009L-B MC-ISIL-2554-01.02 Not Yet Tested N/A MC-ISIL-2561-01.00 Partial 3/1/2008 MC-ISIL-2562-03.00 Not Yet Tested N/A MC-ISIL-2562-03.01 Not Yet Tested N/A MC-ISIL-2563-01.00 Not Yet Tested N/A MC-ISIL-2571-01.00 Not Yet Tested N/A MC-ISIL-2572-01.00 Not Yet Tested N/A 7 2ND-01OL-B MC-ISIL-2561-01.00 Not Yet Tested N/A MC-ISIL-2562-03.01 Not Yet Tested N/A MC-ISIL-2563-01.00 Not Yet Tested N/A 8 2NI-012L-B MC-ISIL-2562-02.00 Complete 4/8/2008 MC-ISIL-2572-01.01 Complete 4/8/2008 9 2NI-013L-B MC-ISIL-2562-02.01 Complete 4/8/2008 MC-ISIL-2572-01.01 Complete 4/8/2008 10 2NI-014L-B MC-ISIL-2562-02.01 Complete 4/3/2008 MC-ISIL-2562-03.00 Complete 4/3/2008 11 2NI-015L-B MC-ISIL-2562-03.00 Not Yet Tested N/A 12 2NI-016L-B MC-ISIL-2562-03.00 Not Yet Tested N/A 13 2NI-017L-B MC-ISIL-2562-03.00 Not Yet Tested N/A MC-ISIL-2562-03.01 Not Yet Tested N/A 14 2NI-018L-B MC-ISIL-2562-03.01 Not Yet Tested N/A 15 2NI-060L-B MC-ISIL-2562-03.00 Not Yet Tested N/A 16 2NI-061L-B MC-ISIL-2562-01.00 Partial 3/7/2008 17 2NI-062L-B MC-ISIL-2562-01.00 Not Yet Tested N/A 18 2NM-026L-B MC-ISIL-2572-01.01 Not Yet Tested N/A EOC 18 / Outage 3 Page 5 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

VT-2 Examination Zone Boundary Dwg Completion Status Date 19 2NM-027L-B MC-ISIL-2572-03.00 Not Yet Tested N/A 20 2NS-019L-B MC-ISIL-2563-01.00 Not Yet Tested N/A 21 2NS-020L-B MC-ISIL-2563-01 .00 Not Yet Tested N/A 22 2NV-003L-B MC-ISIL-2554-01.00 Partial 4/10/2008 MC-ISIL-2554-01.01 Partial 4/10/2008 MC-ISIL-2554-01.02 Not Yet Tested N/A MC-ISIL-2554-01.03 Partial 4/10/2008 23 2NV-004L-B MC-ISIL-1554-05.00 Not Yet Tested N/A MC-ISIL-2554-01.00 Not Yet Tested N/A MC-ISIL-2554-01.01 Partial 4/11/2008 MC-ISIL-2554-01.02 Not Yet Tested N/A MC-ISIL-2554-02.00 Not Yet Tested N/A MC-ISIL-2554-02.01 Not Yet Tested N/A MC-ISIL-2554-03.00 Partial 4/11/2008 MC-ISIL-2554-03.01 Partial 4/11/2008 MC-ISIL-2561-01.00 Partial 4/11/2008 MC-ISIL-2562-01.00 Complete 4/11/2008 MC-ISIL-2562-03.00 Partial 4/11/2008 24 2NV-005L-B MC-ISIL-2554-01.02 Partial 4/10/2008 25 2NV-006L-B MC-ISIL-2554-03.00 Partial 4/29/2008 26 2NV-008L-B MC-ISIL-2554-01.02 Not Yet Tested N/A 27 2NV-011 L-B MC-ISIL-2554-03.01 Partial 4/11/2008 28 2RN-044L-B MC-ISIL-2574-04.00 Partial 4/3/2008 29 2RV-048L-B MC-ISIL-2604-03.00 Partial 3/6/2008 30 2SA-047L-B MC-ISIL-2593-01.02 Not Yet Tested N/A 31 2SM-040L-B MC-ISIL-2591-01.01 Not Yet Tested N/A MC-ISIL-2593-01.00 Not Yet Tested N/A MC-ISIL-2593-01.03 Not Yet Tested N/A 32 2SM-045L-B MC-ISIL-2593-01.00 Not Yet Tested N/A MC-ISIL-2593-01.02 Not Yet Tested N/A MC-ISIL-2593-01.03 Not Yet Tested N/A EOC 18 / Outage 3 Page 6 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

VT-2 Examination Zone Boundary Dwg Completion Status Date 33 2SM-046L-B MC-ISIL-2593-01.00 Not Yet Tested N/A MC-ISIL-2593-01.03 Not Yet Tested N/A 34 2YA-063LB MC-SIL2617-01.00 Not Yet Tested N/A Risk Informed Segments (Category R-A) that receive a pressure test are required each refueling outage. Table 6-6 shows a completion status of the Risk Informed Segment pressure test zones conducted during refueling cycle EOC18. Table 6-6 Detailed Risk Informed Pressure Test Listing EOC18 Zone Segment Completion EOC18 VT-2 Number Boundary Dwg Number Status Examination Date 1 2NC-001L-A MC-ISIL-2553-01.00 NC-18 Complete 4/10/2008 2 NC-19 Complete 4/10/2008 3 NC-20 Complete 4/10/2008 4 NC-21 Complete 4/10/2008 5 NC-23 Complete 4/10/2008 6 NC-86 1 Complete 4/10/2008 7 NC-89 Complete 4/10/2008 8 NC-90 Complete 4/10/2008 9 MC-ISIL-2553-02.00 NC-054 Complete 4/10/2008 10 NC-055 Complete 4/10/2008 11 NC-056 Complete 4/10/2008 12 MC-ISIL-2554-01.00 NV-033A Complete 4/10/2008 13 NV-033B Complete 4/10/2008 14 NV-034A Complete 4/10/2008 15 NV-034B Complete 4/10/2008 16 NV-037 Complete 4/10/2008 17 NV-038 Complete 4/10/2008 18 NV-041A Complete 4/10/2008 19 NV-041 B Complete 4/10/2008 20 NV-042A Complete 4/10/2008 21 NV-042B Complete 4/10/2008 1 Part of this segment is also shown on drawing MC-ISIL-2553-02.01. EOC 18 / Outage 3 Page 7 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

EOC18 Zone Segment Completion EOC18 VT-2 Number Boundary Dwg Number Status Examination Date 22 2NC-001 L-A MC-ISIL-2554-01.01 NV-030A Complete 4/10/2008 23 NV-030B Complete 4/10/2008 24 NV-032A Complete 4/10/2008 25 NV-032B Complete 4/10/2008 26 NV-035 Complete 4/10/2008 27 NV-036 Complete 4/10/2008 28 NV-039A Complete 4/10/2008 29 NV-039B Complete 4/10/2008 30 NV-040A Complete 4/10/2008 31 NV-040B Comolete 4/10/2008 4 4 32 MC-ISIL-2562-01.00 NI-068 Complete 4/10/2008 33 NI-069 Complete 4/10/2008 34 NI-070 Complete 4/10/2008 35 NI-071 Comrlete 4/10/2008 36 2ND-009L-B MC-ISIL-2561-01.00 ND-008C Complete 3/1/2008 37 ND-009C Complete 3/1/2008 38 2N1-061L-B MC-ISIL-2562-01.00 NI-063B Complete 3/7/2008 39 2NV-003L-B MC-ISIL-2554-01.03 2NV026 2 Complete 4/10/2008 40 2NV027 3 Complete 4/10/2008 41 NV-028 3 Complete 4/10/2008 42 NV-029 4 Complete 4/10/2008 43 2NV-004L-B MC-ISIL-2554-01.01 NV-020AD Complete 4/11/2008 44 MC-ISIL-2554-03.00 NV-01 9AA4 Complete 4/11/2008 45 NV-0I9AB Complete 4/11/2008 46 NV-019AD Complete 4/11/2008 47 NV-019B Complete 4/11/2008 48 NV-019D Complete 4/11/2008 49 NV-020AA Complete 4/11/2008 50 NV-020AB Complete 4/11/2008 51 NV-020AE Complete 4/11/2008 52 NV-021A Complete 4/11/2008 53 NV-021B Complete 4/11/2008 54 MC-ISIL-2554-03.01 NV-002AB 5 Complete 4/11/2008 55 NV-002D Complete 4/11/2008 56 NV-01 9C Complete 4/11/2008 57 NV-019E Complete 4/11/2008 58 2NV-005L-B MC-ISIL-2554-01.02 NV-080A Complete 4/10/2008 59 NV-080B Complete 4/10/2008 2 Part of this segment is also shown on drawing MC-ISIL-2554-01.01. 3 Part of this segment is also shown on drawing MC-ISIL-2554-01.00. 4 Part of this segment is also shown on drawing MC-ISIL-2554-03.01. 5 Part of this segment is also shown on drawing MC-ISIL-2554-03.00. EOC 18 / Outage 3 Page 8 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008

EOC18 Zone Segment Completion EOC18 VT-2 Number Boundary Dwg Number Status Examination Date 60 2NV-005L-B MC-ISIL-2554-01.02 NV-084A Complete 4/10/2008 61 NV-084B Complete 4/10/2008 62 NV-084C Complete 4/10/2008 63 2NV-006L-B MC-ISIL-2554-03.00 NV-002C 6 Complete 4/29/2008 64 NV- 08A6 Complete 4/29/2008 65 NV- 096 Complete 4129/2008 66 2NV-011L-B MC-ISIL-2554-03.01 NV-011 A7 Complete 4/11/2008 Section 6 Prepared By: Date: Sectop, _Date: rbve"A 4z )A69 6 The NV PD Pump was out of service during outage 2EOC-18 (ref. PIP M-08-1705). Therefore, RI Segments NV-002C, NV-008A and NV-109 were tested when the pump was placed in service for fuel cycle 2EOC-19. 7 Part of this segment is also part of zone 2NV-004L-B. EOC 18 / Outage 3 Page 9 of 9 McGuire Unit 2 Revision 0 Section 6 - Third Ten-Year Interval May 19, 2008}}

Retrieved from "https://kanterella.com/w/index.php?title=ML082610221&oldid=2566754"