Semantic search
Jump to navigation
Jump to search
Issue date | Title | Topic | |
---|---|---|---|
ML20217G657 | 13 October 1999 | Proposed Tech Specs Pages,Revising TS to Permit Relaxation of Allowed Bypass Test Times & Completion Times for LCOs 3.3.1 & 3.3.2 | Probabilistic Risk Assessment |
ML20217B122 | 4 October 1999 | Proposed Tech Specs Pages,Revising TS 5.5.6 Incorporating Exceptions to Reg Guide 1.35,rev 2,as Described in FSAR Section 3.8.1.7.2 Re Prestressed Concrete Containment Tendon Surveillance Program | Liquid penetrant |
ML20212F489 | 22 September 1999 | Proposed Rev to TS SR 3.8.1.13,to Include Upper Limit for DG Loading for 2 H Portion of SR | |
ML20211J551 | 30 August 1999 | Proposed Tech Specs,Raising Level of Approval Authority for Deviations from Guidelines Provided to Minimize Unit Staff Overtime Specified in TS 5.2.2 | |
ML20211J728 | 26 August 1999 | Proposed Tech Specs Updating Versions of LCO 3.0.4 & SR 3.0.4 to Be in IAW with Versions of LCO 3.0.4 & SR 3.0.4 as Noted in Rev 1 to NUREG-1431 | Shutdown Margin |
ML20211E911 | 24 August 1999 | Proposed Tech Specs,Relaxing Slave Relay Test Frequency from Quarterly to Refueling Frequency | |
ML20196L318 | 18 May 1999 | Proposed Tech Specs SRs 3.8.1.3 & 3.8.1.13 Reducing Loading Requirements for DGs | |
ML20205S379 | 19 April 1999 | Proposed Tech Specs Revising SR 3.3.5.2 & Associated Bases to Allow Loss of Voltage & Degraded Voltage Trip Setpoints to Be Treated as Nominal Values in Same Manner as Trip Setpoints for RTS & ESFAS Instrumentation | |
ML20205Q790 | 13 April 1999 | Proposed Tech Specs,Updating Versions of LCO 3.0.4 & SR 3.0.4 to Be Consistent with Versions of LCO 3.0.4 & SR 3.0.4 as Appear in Rev 1 to NUREG-1431 | Shutdown Margin |
ML20154M996 | 15 October 1998 | Proposed Tech Specs,Deleting & Modifing Conditions Which Were Issued with Licenses That Are Now Obsolete | Safe Shutdown Fire Protection Program |
ML20151U201 | 3 September 1998 | Proposed Tech Specs Pages for Amends to Licenses NPF-68 & NPF-81,changing TS to Support Replacement of Nuclear Instrumentation Sys Source Range & Intermediate Range Channels & post-accident Neutron Flux Monitoring Sys | Shutdown Margin |
ML20236R466 | 13 July 1998 | Proposed Tech Specs Eliminating Periodic Response Time Testing Requirements on Selected Sensors & Selected Protected Channels | Pressure Boundary Leakage |
ML20154Q861 | 30 June 1998 | Proposed Tech Specs Bases Since Implementation of Improved TS on 970123 Through Aug 1998 | Safe Shutdown Ultimate heat sink Anticipated operational occurrence Probabilistic Risk Assessment Qualified Offsite Circuit Offsite Circuit |
ML20206N313 | 30 June 1998 | Proposed Tech Specs Re Replacement of Nuclear Instrumentation Sys Source & Intermediate Range Channels & post-accident Neutron Flux Monitoring Sys | |
ML20236F163 | 26 June 1998 | Proposed Tech Specs Revising LCO 3.3.6 Re CVI Instrumentation & LCO 3.9.4 Re Containment Penetrations to Facilitate Outage Planning | |
ML20247K504 | 15 May 1998 | Proposed Tech Specs Pages Revising New Program 5.5.18 to Extent That Items B,C & D. Refer to LCO Action Statement & Bases Insert for New Required Actions B.5.1 & B.5.2 | Probabilistic Risk Assessment Offsite Circuit |
ML20247G947 | 8 May 1998 | Proposed Tech Specs Section 5.5.7, RCP Flywheel Insp Program, Specifying Alternate Flywheel Insp Once Every Ten Years | Liquid penetrant |
ML20216J497 | 16 April 1998 | Proposed Tech Specs 3.3.1 & 3.3.2 Re Reactor Trip Sys & ESFAS Instrumentation | |
ML20199E535 | 27 January 1998 | Complete Replacement of All Typed Pages of TS Changes Submitted in Ltr LCV-0849-E | Ultimate heat sink Post Accident Monitoring |
ML20199A413 | 22 January 1998 | Proposed Tech Specs Adding Conditions for DG for Extended DG Completion Time of Fourteen Days | Safe Shutdown Probabilistic Risk Assessment Offsite Circuit |
ML20199J665 | 20 November 1997 | Proposed Tech Specs Pages Changing Capacity of Unit 1 Spent Fuel Storage Pool from 288 to 1476 Assemblies & Revising Design Features Description to Reflect Criticality Analyses & Storage Cell Spacing | |
ML20199G390 | 20 November 1997 | Proposed Tech Specs Facilitating Treatment of Trip Setpoints as Nominal Values & Correct Certain Typos | |
ML20211N245 | 10 October 1997 | Proposed Typed Tech Specs Pages,Revising Credit for Boron & Enrichment Increase for Fuel Storage | Ultimate heat sink Post Accident Monitoring |
ML20217H905 | 8 August 1997 | Proposed Tech Specs Pages Re Credit for Boron & Enrichment Increase for Fuel storage.W/marked-up Pages | Ultimate heat sink Post Accident Monitoring |
ML20141A854 | 13 June 1997 | Proposed Tech Specs Revising LCO 3.4.10 to Reduce Nominal Set Pressure by 1% to 2460 & Increase Tolerance to +2% | |
ML20133L308 | 10 January 1997 | Proposed Tech Specs Table 3.3.1-1 Re Amends 96 & 74 | |
ML20132C471 | 12 December 1996 | Proposed Tech Specs Re Physical Security & Contingency Plan | Safe Shutdown Fire Protection Program |
ML20117N585 | 13 September 1996 | Proposed Tech Specs 3.8.1 Re AC Electrical Sources | Safe Shutdown Shutdown Margin Offsite Circuit |
ML20129A646 | 11 September 1996 | Proposed Tech Specs,Providing Updated Documentation for License Amends Application for Southern Nuclear to Become Licensed Operator | Safe Shutdown Fire Protection Program |
ML20117C415 | 23 August 1996 | Proposed Tech Specs to Convert Units 1 & 2 Based on NUREG 1431 | High winds Qualified Offsite Circuit Large early release frequency Offsite Circuit |
ML20117N647 | 17 June 1996 | Proposed Tech Specs Section 5.3.1,allowing Use of Fuel Assemblies Containing Fuel Rods Clad W/Zirlo | Fuel cladding |
ML20117N636 | 17 June 1996 | Proposed Tech Specs,Clarifying Requirements of TS SR 4.8.1.1.2.j (2) That Prescribes Pressure Test of Portions of Diesel fuel-oil Sys Designed to Section Iii,Subsection Nd of ASME Code | |
ML20111A550 | 6 May 1996 | Proposed Tech Specs,Incorporating Extended DG AOT to 14 Days from Discovery of Failure to Meet Lco,Provided Standby Auxiliary Transformer Available | Safe Shutdown High winds Qualified Offsite Circuit Emergency Lighting Offsite Circuit |
ML20101D415 | 5 March 1996 | Proposed Tech Specs Re Conversion Based on NUREG-1431 | |
ML20100G037 | 19 February 1996 | Proposed Tech Specs Based on NUREG-1431 | Reactor Vessel Water Level Grab sample Offsite Dose Calculation Manual Post Accident Monitoring Hydrostatic Offsite Circuit Grace period Backfit |
ML20097A317 | 30 January 1996 | Proposed Improved TS Based on NUREG-1431 | |
ML20095J250 | 22 December 1995 | Proposed Tech Specs,Allowing Use of Option B of 10CFR50,App J for Type B & C Testing | |
ML20094N407 | 20 November 1995 | Proposed Tech Specs,Converting Existing TS to Format & Content of NUREG-1431 | |
ML20093K228 | 16 October 1995 | Proposed Tech Specs,Adding Footnote to Spec 4.6.1.2.d Stating That Type B & C Tests Scheduled for Refueling Outage 1R6 Will Be Conducted Per Option B of 10CFR50 App J & Using Guidance of RG 1.163,Rev 0 | |
ML20098C147 | 2 October 1995 | Proposed Tech Specs,Allowing Next Type a Test to Be Rescheduled | |
ML20098A486 | 22 September 1995 | Proposed Tech Specs,Converting Existing VEGP TS Requirements to Format & Content of NUREG-1431 | |
ML20086G569 | 6 July 1995 | Proposed Tech Specs Section 3.8.3.1,Page 3/4 8-15 Re Footnote & Bases & Expansion | |
ML20085G717 | 14 June 1995 | Proposed Tech Specs,Clarifying in Revised Bases of 3/4 Chapter 8,that Alignment of Standby Auxiliary Transformer Intended to Be Temporary Alignment & Will Be Utilized When Normal Preferred Offsite Power Source,Rat Unavailable | Safe Shutdown Offsite Circuit |
ML20083M073 | 12 May 1995 | Proposed Tech Specs Revising SR 4.1.6.2 to Support Exemption from 10CFR50,App J Type a Test Schedule | |
ML20083A139 | 2 May 1995 | Proposed Tech Specs,Adding Automatic Load Sequencer to Plant TS | Offsite Circuit |
ML20082D988 | 4 April 1995 | Proposed Tech Spec Page 6-7 Reflecting Corrected Terminology Re Composition of Plant Review Board | |
ML20081J503 | 17 March 1995 | Proposed TS 3.9.4 Re Containment Airlock Doors to Be Open During Fuel Movement | Ultimate heat sink Pressure Boundary Leakage |
ML20081D159 | 17 March 1995 | Proposed TS Table 3.3-8, Accident Monitoring Instrumentation, Deleting Loop Numbers 551,552,553 & 554 | |
ML20082E773 | 4 March 1995 | Proposed Tech Specs Re Plant Review Board Composition | |
ML20080N245 | 28 February 1995 | Proposed Tech Specs Pages Re Accident Montoring Instrumentation |