ML023440408
| ML023440408 | |
| Person / Time | |
|---|---|
| Site: | Clinton  |
| Issue date: | 07/29/2002 |
| From: | Price R AmerGen Energy Co |
| To: | Office of Nuclear Reactor Regulation |
| References | |
| 40-461-02-301 | |
| Download: ML023440408 (128) | |
Text
INITIAL SUBMITTAL OF THE WRITTEN EXAMINATION FOR THE CLINTON INITIAL EXAMINATION - JULY/AUG 2002
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 1 BOTH 201003 A1.02 2.8 2.8 85201 NRS.19 Control Rod and Drive Mechanism Cognitive Level: HIGH Ability to predict and/or monitor changes in CRD drive pressure parameters associated with operating the CONTROL ROD AND DRIVE MECHANISM controls including:
Which one of the following is the correct method to raise Drive Water Differential Pressure from 250 psid to 300 psid per Control Rod Hydraulics and Control, 3304.01?
A. Throttle OPEN CRD Pressure Control Valve, 1C11 -F003.
B. Throttle SHUT CRD Pressure Control Valve, IC11 -F003.
C. Throttle OPEN CRD Flow Control Valve, 1C 11-FO02A.
D. Throttle SHUT CRD Flow Control Valve, 1C1 1-F002A.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3304.01 rev 29c New 0 Explanation:
B is correct, throttling SHUT the Pressure Control Valve will raise Drive Water DiP.
A is wrong, this will LOWER D/P.
C is wrong, this will raise Cooling Water Flow and Cooling Water D/P D is wrong, this will lower Cooling Water Flow and Cooling Water D/P NRC SUBMITTAL COPY 05/22/0
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective "2 BOTH 201005 K5.10 3.2 3.3 Rod Control and Information System (RCIS) Cognitive Level: RECALL Knowledge of the operational implications of the Rod withdrawal limiter: BWR-6 S.....following concepts as they apply to ROD CONTROL AND INFORMATION SYSTEM (RCIS):
Why are Rod Control & Information System notch limits enforced ABOVE the Low Power Setpoint?
A. Prevent exceeding MCPR during a postulated control rod drop accident.
B. Prevent exceeding MCPR during a postulated control rod continuous withdrawal accident.
C. Restrict control rod patterns during a power increase to prevent exceeding the Reactivity Anomalies technical specification D. Restrict control rod patterns to those analyzed resulting in acceptable fuel enthalpies during a reactor startup.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None ITS B3.3.2.1 rev4-8 Modified Perry 97 0 NRC #16 Explanation:
B is correct, Rod Withdrawal Limiter ensures MCPR SL is not exceeded during continuous withdraw from >LPSP A is wrong, CRDA applies to Rod Pattern Controller, not Rod Withdrawal Limiter.
C is wrong, anomalies are not mentioned in B3.3.2.1.
D is wrong, criteria for CRDA.
NOTE - removed "...and LHGR" from original question.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 3 BOTH 201005 K6.01 3.2 3.2 Rod Control and Information System (RCIS) Cognitive Level: HIGH Knowledge of the effect that a loss or malfunction First stage shell pressure or opening of of the following will have on the ROD CONTROL a bypass valve(s): BWR-6 AND INFORMATION SYSTEM (RCIS):
While performing control rod scram time testing at 26% reactor power, a main turbine trip occurs.
Why does the rod pattern controller start to enforce control rod insertion AND withdrawal limits?
A. The End-of-Cycle Recirc Pump Downshift caused reactor power to decrease below the Low Power Setpoint.
B. The reduction in Feedwater flow resulted in a Recirc Pump Downshift that reduced reactor power below the Low Power Setpoint.
C. The loss of steam to the turbine caused the rod pattern controller to sense power to be below the Low Power Setpoint.
D. The bypass valves opening decreased steam flow at the equalizing header to less than the
" "-LowPower Setpoint.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None CPS No.3304.02 rev LC 557 0 15 Explanation: Turbine Trip Scram is bypassed <33.3% power, reactor continues to operate.
C is correct, Turbine Trip at 26% inplies BPVs can accommodate steam flow. 1st Stage Shell Pressure is low because Turbine is tripped, <LPSP signal activates Rod Pattern Controller.
A is wrong, at 26% power EOC-RPT is not active, no RR downshift will occur.
B is wrong, no feedwater flow reduction will occur from a Turbine Trip with Bypass.
D is wrong, steam flow at equalizing header will not change.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 4 BOTH 202001 A2.20 2.8 2.9 87202 .1.24 Recirculation System Cognitive Level:HIGH Ability to (a) predict the impacts of the following on Loss of D.C. power: Plant-Specific the RECIRCULATION SYSTEM; and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
The reactor is at 90% power.
DC Control Power is lost ONLY to the 4B breaker for Reactor Recirculation Pump B.
Reactor Recirculation Pump breaker 5B will (1) , the procedure for this situation is (2).
(1) (2)
A. trip 4100.01 Reactor Scram.
B. trip 4008.01 Abnormal Reactor Coolant Flow.
C. remain closed 4201.01 Loss of DC Power.
D. remain closed 3302.01 Reactor Recirc FCV Lockout Reset.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 4008.01 rev 18 NEW 0 Explanation:
B is correct, pump trips, power will lower and not require scram.
A is wrong, Single Loop Ops is allowed.
C and D are wrong, RR Pump B will trip.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 5 BOTH 209001 K2.02 2.5 2.7 Low Pressure Core Spray System Cognitive Level: RECALL Knowledge of electrical power supplies to the Valve power following:
AB MCC 1A3 is de-energized, which one of the following valves is affected?
A. LPCS Injection Valve, 1E21-F005 B. RHR C Minimum Flow.Valve, 1E12-F064C C. HPCS Injection Valve, 1E22-F004 D. RCIC Injection Valve, 1E51-F013 Explanation:
A is correct, powered AB MCC 1A3 B is wrong, powered AB MCC 1B2 C is wrong, powered 1E22-S002 D is wrong, powered DC MCC 1A NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 6 BOTH 211000 A1.06 3.8 3.9 Standby Liquid Control System Cognitive Level: RECALL Ability to predict and/or monitor changes in Flow indication: Plant-Specific parameters associated with operating the STANDBY LIQUID CONTROL SYSTEM controls including:
Which of the following verifies Standby Liquid Control Injection flow into the reactor?
- 3. SLC Pumps A AND B START
- 4. SLC Pump Discharge Pressure slightly ABOVE Reactor Pressure A. 1, 2, and 3ONLY B. 1, 3, 4 and 5 ONLY C. 1, 2,4, and 5 ONLY D. 2, 3, 4, and 5 ONLY ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 4411.10 rev 4 NEW 0 Explanation:
D is correct, normal injection indication, 1 is incorrect, this light EXTINGUISHES A is wrong, 1 is incorrect, this light EXTINGUISHES B is wrong, I is incorrect, this light EXTINGUISHES.
C is wrong, 1 is incorrect, this light EXTINGUISHES.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 7 BOTH 211000 K2.02 3.1 3.2 Standby Liquid Control System Cognitive Level: RECALL Knowledge of electrical power supplies to the Explosive valves following:
AB MCC IB 1 120 V Fire Protection Distribution Panel is deenergized.
Which one of the following components lost power?
A. Standby Liquid Control Pump 1B, 1C41-COO1B B. Standby Liquid Storage Tank Outlet Valve, 1C4 I-FOO1B C. Standby Liquid Control Squib Valve, 1C41-FO04B D. Standby Liquid Storage Tank Operating Heater, 1C4 1-D002 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 3314.OlEO01lrev 9a _ýNEW 0 Explanation:
C is correct A is wrong, powered AB MCC 1B 1, not the Fire Protection Distribution Panel B is wrong, powered AB MCC 1B2 D is wrong, powered AB MCC 1H NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 8 BOTH 212000 A3.01 4.4 4.4 87409 .1.3.2 Reactor Protection System Cognitive Level: HIGH Ability to monitor automatic operations of the Reactor power REACTOR PROTECTION SYSTEM including:
A reactor startup is in progress.
Which one of the following IRM readings will result in a reactor scram?
A B C D E F G H A. 122 105 108 110 124 112 116 109 B. 105 124 109 110 122 116 108 112 C. 110 108 125 116 112 118 122 109 D. 109 108 119 120 105 116 118 121 ANS: Reference Provided: Reference and Rev: Question Sore: Ques Rev B None 3306.01 rev 10a NEW 0 Explanation: Must know trip setpoint and required coincidence.
B is correct, trips at 120/125, this selection has a Div 2 (B) and a Div 1 (E) trip.
A is wrong, both trips given are Div 1 (A and E)
C is wrong, both trips given are Div 3 (C and G)
D is wrong, both trips given are Div 4 (D and H)
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 9 BOTH 212000 K5.01 2.7 2.9 87411 .1.1.4 Reactor Protection System Cognitive Level: RECALL Knowledge of the operational implications of the Fuel thermal time constant following concepts as they apply to REACTOR PROTECTION SYSTEM:
Which one of the following RPS trip signals is filtered with a time constant?
A. APRM Fixed Neutron Flux - High B. APRM Flow Biased Simulated Thermal Power - High C. APRM Neutron Flux - High, Setdown D. IRM Neutron Flux - High ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 87411 rev 2 NEW 0 Explanation:
B is correct, reference states verbatim A, C, and D are wrong, are not time constant filtered CPS ILTO 101 NRC Written Exam Questions 05/22/0
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 10 BOTH 214000 K5.01 2.7 2.8 87400 .1.13 Rod Position Information System Cognitive Level: RECALL Knowledge of the operational implications of the Reed switches following concepts as they apply to ROD POSITION INFORMATION SYSTEM:
With a control rod fully withdrawn, how many Position Indicator Probe reed switches should be closed for that rod?
A. I B. 2 C. 3 D. 4 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP87400 rev 3 NEW 0 Explanation:
C is correct, there are 4 reed switches closed. Two PIP strings each with 2 closed reed switches, one for NOTCH 48 position indication, one for the FULL-OUT light function.
B is wrong, 4 C is wrong, 4 D is wrong, 4 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 11 BOTH 214000 K6.01 2.5 2.6 87401 .1.1.5 Rod Position Information System Cognitive Level: RECALL Knowledge of the effect that a loss or malfunction A.C. electrical power of the following will have on the ROD POSITION INFORMATION SYSTEM:
The plant is operating at 90% power when a loss of 4160 V Bus 1B 1 occurs followed by a scram from MSIV closure.
Following the scram it is noted that the Rod Control and Information System (RC&IS) indication is blinking ON and OFF.
Which of the following actions is appropriate to verify ALL RODS IN using the RC&IS display?
A. Depress DATA SOURCE pushbutton to select the operable channel.
B. Depress the RAW DATA and SCRAM VALVES button to determine rod positions.
C. Depress the DATA MODE and DATA SOURCE pushbuttons to select the operable channel.
D. Acknowledge the ACCUMULATOR FAULT to allow the rods to settle to the full in position.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP 87401 rev 2 CPS NRC Exam 1997 0 Question 16 Explanation:
C is correct, blinking indicates one channel has data, the other does not. DATA MODE allows selection between dual channel and single channel, DATA SOURCE selects A or B data.
A is wrong, still blinking, due to being in dual channel.
B is wrong, SCRAM VALVES will indicate which rods have Scram Valves open. Not rod position.
D is wrong, ACCUMULATOR FAULT will indicate which accumulators have low pressure or high water, not rod position.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 12 BOTH 215003 K1.07 3.0 3.0 87409 .1.2.4 Intermediate Range Monitor (IRM) System Cognitive Level: RECALL Knowledge of the physical connections and/or Reactor vessel cause- effect relationships between INTERMEDIATE RANGE MONITOR (IRM)
SYSTEM and the following:
When FULLY INSERTED, IRM detectors are A. NOT in direct contact with water AND are 15 inches ABOVE core centerline.
B. in direct contact with water AND are 15 inches ABOVE core centerline.
C. NOT in direct contact with water AND are 15 inches BELOW core centerline.
D. in direct contact with water AND are 15 inches BELOW core centerline.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP87409 rev 1 NEW 0 Explanation:
A is correct, IRMs are NOT in direct contact with water AND 15 inches ABOVE core centerline when fully inserted B is wrong, IRMs are NOT in direct contact with water.
C is wrong, IRMs are 15 inches ABOVE core centerline.
D is wrong, IRMs are NOT in direct contact with water AND 15 inches ABOVE core centerline when fully inserted.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 13 BOTH 215003 K3.01 3.9 4.0 87409 .1.2.5 Intermediate Range Monitor (IRM) System Cognitive Level: HIGH Knowledge of the effect that a loss or malfunction RPS of the INTERMEDIATE RANGE MONITOR (IRM) SYSTEM will have on following:
The Mode Switch is in STARTUP/HOT STANDBY.
An IRM A INOP Trip is generated.
Which one of the following describes the RC&IS and RPS response?
Rod Block RPS Trip Signal - Div 1 Scram A. YES YES NO B. NO NO NO C. YES NO NO D. YES YES YES ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP 87409 rev 1 Modified INPO 1876 0 LaSalle Explanation:
A is correct, Rod Block and RPS Trip Div 1 are generated with RMS in STARTUP B is wrong, Rod Block and RPS Trip Div 1 are generated C is wrong, RPS Trip Div 1 is generated D is wrong, Rod Block and RPS Trip Div 1 are generated, Scram does not occur, no Division 2, 3,or 4 RPS Trips are given.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 14 BOTH 215004 A2.01 2.7 2.9 87215 .1.4.3 Source Range Monitor (SRM) System Cognitive Level: HIGH Ability to (a) predict the impacts of the following on Power supply degraded the SOURCE RANGE MONITOR (SRM)
SYSTEM; and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
Reactor startup is in progress. The reactor is NOT critical.
SRMs read as follows:
Channel A 3 B C 3 D 3 Counts Per Second 2x10 3x1 03 2x10 5x10 PREDICT the effect of a loss of the SRM C High Voltage Power Supply, AND what would be the correct action, if any?
EFFECT NECESSARY OPERATOR ACTION A. Rod Block Wait until power is on IRM Range 3.
B. Rod Block Bypass the affected channel and continue startup.
C. Scram occurs Fully insert all SRMs.
D. Nothing happens Startup may be continued.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None ITS 3.3.1.2 amend 95 New 0 Explanation:
B is correct, loss of power supply causes SRM INOP Rod Block. ITS allows bypass of SRM.
A is wrong, reactor is not critical, power won't reach IRM Range 3. INOP bypassed Range 8.
C is wrong, SRMs are not RPS inputs.
D is wrong, Rod Block occurs.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 15 BOTH 215004 A4.07 3.4 3.6 87215 .1.7 Source Range Monitor (SRM) System Cognitive Level: RECALL Ability to manually operate and/or monitor in the Verification of proper functioning/
control room: operability Per Source/Intermediate Range Monitors, 3306.01, during reactor startup Source Range Monitors are maintained between (1) counts per second, during detector motion reactor period will be (2).
(1) (2)
A. >100to 1x10 5 ACCURATE B. >100to lx10 5 INACCURATE C. >1000to lx10 6 ACCURATE D. >1000 to lxl0 6 INACCURATE ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3306.01 rev 10a NEW 0 Explanation:
B is correct, SRMs are maintained between lxlI to lx 105 cps, during motion reactor period is INACCURATE.
A is wrong, during motion reactor period is INACCURATE.
C is wrong, SRMs are maintained between 1x10 2 to 1xl0 5 cps, during motion reactor period is INACCURATE.
D is wrong, SRMs are maintained between IxI02 to lxl05 cps.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 16 BOTH 215005 A1.07 3.0 3.4 87411 .1.1.3 Average Power Range Monitor/Local Power Range Cognitive Level: HIGH Monitor System Ability to predict and/or monitor changes in APRM (gain adjustment factor) parameters associated with operating the APRM/LPRM controls including:
During steady state power operations, the APRM Gain Adjustment Factor (AGAF) for APRM C is 1.04.
The indication from APRM C is (1) because actual thermal power is(2) indicated power.
(1) (2)
A. conservative LESS THAN B. conservative GREATER THAN C. NON-conservative GREATER THAN D. NON-conservative LESS THAN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP8741 1 rev 2 Clinton 1997 NRC 0 Exam Question 25 Explanation:
C is correct, NON conservative condition, and thermal is greater than indicated power.
A is wrong, NON conservative condition.
B is wrong, NON conservative condition, and thermal is greater than indicated power.
D is wrong, thermal is greater than indicated power.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 17 BOTH 216000 Kl.17 3.5 3.7 85264 .1.4.1 Nuclear Boiler Instrumentation Cognitive Level: HIGH Knowledge of the physical connections and/or Emergency generators cause- effect relationships between NUCLEAR BOILER INSTRUMENTATION and the following:
A transient occurred, the reactor has scrammed, plant conditions are:
"* The Mode Switch is in SHUTDOWN with all control rods fully inserted.
"* RPV Pressure is 755 psig.
"* Drywell Pressure is 1.5 psig and rising at .02 psig per minute.
"* RPV Water Level is -50 inches rising from a low indicated value of-73 inches.
Which one of the following describes the status of the Emergency Diesel Generators?
DG1A DG1B DG1C A. Running Standby Standby B. Running Running Standby C. Standby Running Running D. Standby Standby Running ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev Explanation:
D is correct, Level 2 (-45.5 in)was reached which starts DG1C, Level 1 (-145.5 in) was not reached, DG1A and DG1B are in Standby.
A is wrong, DG1A should be in Standby, DG1C should be Running.
B is wrong, DG1A and B should be in Standby, DG1C should be Running.
C is wrong, DG1B should be in Standby.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 18 BOTH 218000 A4.10 3.8 3.8 LP87218 1.11.1 Automatic Depressurization System Cognitive Level: RECALL Ability to manually operate and/or monitor in the Lights and alarms control room:
Automatic Depressurization System has actuated.
What indication would be shown when the initiating signal is CLEAR and ready to be reset?
A. ADS INHIBIT white lights ON B. HI DRYWELL PRESSURE A SEAL IN RESET red light ON C. ADS A&E LOGIC SEAL IN RESET white lights ON D. ADS DIV 1 OUT OF SERVICE status light ON ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 87218 rev 1 New 0 Explanation:
C is correct A is wrong, signal may not be clear B is wrong, and is an initiation logic input D is wrong, OOS switch has been turned, does not affect ADS logic.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 19 BOTH 218000 K4.02 3.8 4.0 87218 Automatic Depressurization System Cognitive Level: HIGH Knowledge of AUTOMATIC Allows manual initiation of ADS logic DEPRESSURIZATION SYSTEM design feature(s) and/or interlocks which provide for the following:
During a LOSS of Division 1 DC Power, the ADS valves can be OPENED by depressing which of the following ADS Logic Initiate pushbuttons?
A. AANDE B. BANDE C. AANDF D. BANDF ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 87218 revl NEW 0 Explanation:
D is correct, with a LOSS of Division 1 DC, ONLY the B AND F buttons provide adequate logic.
A is wrong, A AND E are BOTH ineffective due to LOSS of Division 1 DC.
B is wrong, E is ineffective due to LOSS of Division 1 DC, actuation requires TWO inputs.
C is wrong, A is ineffective due to LOSS of Division 1 DC, actuation requires TWO inputs.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 20 RO 219000 A4.03 2.9 2.9 RHR/LPCI: Torus/Suppression Pool Cooling Mode Cognitive Level: HIGH Ability to manually operate and/or monitor in the Keep fill system control room:
While securing RHR B from the Suppression Pool Cooling mode, the following occur:
RHR PUMP B DISCHARGE PRESSURE ABNORMAL, 5065-5A, alarms RHR B Heat Exchanger Pressure, E12-R606B reads 40 psig.
This alarm is due to a (1) pressure condition, the REQUIRED operator action is to (2).
(1) (2)
A. LOW continue to place RHR B in STANDBY B. LOW pull the RHR Pump B breaker control power fuses C. HIGH continue to place RHR B in STANDBY D. HIGH pull the RHR Pump B breaker control power fuses ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 5065-5A rev 33 NEW 7 0 Explanation:
B is correct, LOW pressure alarm setpoint 57.8 psig at RHR Pump B Discharge, Heat Exchanger Pressure tap is physically higher in the system.. Pulling the control power fuses prescribed by the procedure.
A is wrong, Pulling the control power fuses prescribed by the procedure.
C is wrong, LOW pressure, Pulling the control power fuses prescribed by the procedure.
D is wrong, LOW pressure.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 21 BOTH 259002 2.4.10 3.0 3.1 87570 .1.8.1 Reactor Water Level Control System Cognitive Level:HIGH Emergency Procedures and Plan Knowledge of annunciator response procedures.
"* Reactor Power is 90%.
"* Both Turbine Driven Reactor Feed Pumps are in Three Element control.
"* Feedwater Level Control is selected to Channel A.
"* REACTOR WATER LEVEL HIGH - LOW, 5002-2Q alarms.
"* WATER LEVEL SIGNAL FAILURE, 5002-2P alarms.
"* RPV LEVEL CHANNEL ERROR A amber light is LIT.
Narrow Range Level Channels read as follows 1C34-NO04A 1C34-N004B 1C34-NO04C 30.8 inches 39.0 inches 39.4 inches If NO ACTION is taken a (1) trip will occur.
To correct this situation, it is necessary to transfer level control to (2).
(1) (2)
A. LEVEL 3 Channel B B. LEVEL 3 Single Element C. LEVEL 8 Channel B D. LEVEL 8 Single Element ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 5002-2P rev 28a NEW Explanation: Symptoms are given for "selected"Channel A gradually failing low, actual level is gradually rising as verified by the "non selected" Narrow Range Level instruments.
C is correct, 2 out of 3 instruments trending high will eventually cause a Level 8 trip, correct action is to select Channel B for control. Single Element does NOT swap level channel selection.
A is wrong, LEVEL 8 B is wrong, LEVEL 8 and Channel B D is wrong, Channel B NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 22 BOTH 223001 K4.01 3.7 3.8 85223 .1.1.5 Primary Containment System and Auxiliaries Cognitive Level: RECALL Knowledge of PRIMARY CONTAINMENT Allows for absorption of the energy SYSTEM AND AUXILIARIES design feature(s) released during a LOCA and/or interlocks which provide for the following:
Which one of the following components promotes steam condensation during a DBA LOCA?
A. Horizontal Vents B. Spargers C. Drywell Air Coolers D. Drywell Vacuum Breakers ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP85223 rev 1 NEW 0 Explanation:
A is correct, Horizontal Vents transfer steam to the suppression pool.
B is wrong, SRV tailpipes have spargers and do NOT open on a DBA LOCA.
C is wrong, Drywell Air Cooler chilled water is isolated during a LOCA.
D is wrong, Drywell Vacuum Breakers do NOT condense steam nor transfer it to be condensed.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 23 BOTH 223002 K6.06 2.8 2.9 87401 .1.4.1 Primary Containment Isolation System/Nuclear Cognitive Level: HIGH Steam Supply Shut-Off Knowledge of the effect that a loss or malfunction Various process instrumentation of the following will have on the PCIS/NSSSS:
The plant is in Cold Shutdown with RHR A Loop in Shutdown Cooling Mode.
RHR Heat Exchanger Room Ambient Temperature Instrument A in the Division 1 Trip System, IE3 1-N608A, fails HIGH.
Which of the following describes the status of the RHR system TWO MINUTES LATER?
SDC Outboard SDC Inboard RHR Pump A Isolation Valve Isolation Valve 1E12-CO02A 1E12-F008 1E12-F009 A. ON OPEN SHUT B. ON OPEN OPEN C. OFF SHUT SHUT D. OFF SHUT OPEN ANS: Reference Provided: Reference and Rev: Question Source: es Rev D None ILP87407 revlI NEW 0 Explanation:
D is correct, Div 1 Trip System isolates SDC Outboard Valve 1E12-F008, RHR A Trips.
A is wrong, Div 1 Trip System isolates SDC Outboard Valve 1E12-F008, RHR A Trips.
B is wrong, Div 1 Trip System isolates SDC Outboard Valve 1E12-F008, RHR A Trips.
C is wrong, Div 1 Trip System does NOT isolate SDC Inboard Valve 1E12-F009.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam I System # KA # RO SRO LP # Objective 24 BOTH 226001 A3.04 3.1 3.1 85205 .1.4.4 RHR/LPCI: Containment Spray System Mode Cognitive Level: RECALL Ability to monitor automatic operations of the Lights and alarms RHR/LPCI: CONTAINMENT SPRAY SYSTEM MODE including:
In response to simultaneous LPCI and CNMT SPRAY initiation signals, the RED light associated with RHR A HX BYPASS VALVE,1 E12-F048A will A. be LIT for 10 minutes B. be LIT until CNMT SPRAY logic is RESET C. cycle LIT / EXTINGUISHED for 10 minutes then EXTINGUISHES D. be EXTINGUISHED until BOTH signals are reset ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev]
(C None 73312.01 rev 35 NEW 0 Explanation:
C is correct, 48A cycles for duration of LPCI 10 minute timer, then closes for CNMT Spray.
A is wrong, cycles for 10 minutes.
B is wrong, cycles for 10 minutes.
D is wrong, cycles for 10 minutes, then closes.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 25 BOTH 226001 K1.04 3.1 3.3 85205 rev 6 RHR/LPCI: Containment Spray System Mode Cognitive Level: RECALL Knowledge of the physical connections and/or A.C. electrical power cause- effect relationships between RHR/LPCI:
CONTAINMENT SPRAY SYSTEM MODE and the following:
During the initiation of RHR A into the Containment Spray Mode, RHR A To Containment Spray A Shutoff Valve, 1E12-F028A RED and GREEN valve position indication lights EXTINGUISH.
This could be caused by a breaker trip at A. UPS IA B. AB MCC 1A4 C. DC MCC 1E D. NSPS Distribution Panel A ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3312.01E001 rev 14 NEW 0 Explanation:
B is correct, power supply is AB MCC 1A4 Distractors do not affect 1E12-F028A.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 26 BOTH 234000 K4.02 3.3 4.1 86614 .1.8.12 Fuel Handling Equipment Cognitive Level: HIGH Knowledge of FUEL HANDLING EQUIPMENT Prevention of control rod movement design feature(s) and/or interlocks which provide for during core alterations the following:
The Mode Switch is in REFUEL and all control rods are inserted.
The Refueling Bridge operator grappled a fuel bundle, raised the grapple, and commenced moving the bundle towards the core.
As the Refueling Bridge started moving towards the core, it A. stopped before it reached the core AND initiated a control rod block B. continued over the core AND caused NO other protective actions C. stopped before it reached the core AND caused NO other protective actions D. continued over the core AND then initiated a control rod block ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 86614 INPO 7928 Hatch 0 Explanation:
D is correct, loaded grapple over the core initiates a rod block.
A is wrong, bridge will not stop B is wrong, rod block will be initiated C is wrong, bridge will not stop and a rod block will be initiated.
CPS ILTO 101 NRC Written Exam Questions 05/22/0
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 27 BOTH 239001 K4.06 3.1 3.2 85431 .1.5.2 Main and Reheat Steam System Cognitive Level: HIGH Knowledge of MAIN AND REHEAT STEAM Allows for removal or prevents escape SYSTEM design feature(s) and/or interlocks which of radioactive steam from systems that provide for the following: have leaky MSIV's
"* A LOCA has occurred.
"* Standby Gas Treatment Train A is in service.
"* Main Steam Line A Inboard MSIV, 1B2 17-F022A, is OPEN.
"* Reactor Pressure is 25 psig.
"* Main Steam Line A Pressure is 17 psig.
Which of the following conditions will ALLOW initiation of the Inboard MSIV-LCS System A?
A. Main Steam Line A Pressure lowers to 15 psig AND MSIV-LCS dilution flow is 105 cfm.
B. Reactor Pressure lowers to 19 psig AND MSIV-LCS dilution flow is 105 cfm.
C. Main Steam Line A Pressure lowers to 15 psig AND 1B21-F022A, Main Steam Line A Inboard MSIV is SHUT.
D. Reactor Pressure lowers to 19 psig AND 1B21-F022A, Main Steam Line A Inboard MSIV is SHUT.
None 5067.02 (21-) rev 31 Modified ILT Bank 21377 Explanation:
D is correct, permissives are Reactor AND Main Steam Line Pressure <20 psig AND Inboard MSIV must be SHUT A is wrong,_Reactor Pressure must be <20 psig AND Inboard MSIV must be SHUT.
B is wrong, Inboard MSIV must be SHUT.
C is wrong,_Reactor Pressure must be <20 psig.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 28 BOTH 239003 K4.01 3.2 3.5 85431 .1.1.1 MSIV Leakage Control System Cognitive Level: RECALL Knowledge of MSIV LEAKAGE CONTROL Performance of its safety function SYSTEM design feature(s) and/or interlocks which following a loss of offsite power:
provide for the following: BWR-4, 5, 6(P-Spec)
What design feature does MSIV-LCS utilize to perform its safety function following a Loss of Offsite Power?
MSIV Leakage Control System components A. are all powered from Uninterruptible Power Supplies B. are all powered from divisional batteries C. are all powered from Diesel Generator supplied buses D. all fail to their required position on loss of power ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP85431 rev 2 NEW 0 Explanation:
C is correct, MSIV-LCS components are powered from Diesel Generator supplied buses.
A is wrong, powered from Diesel Generator supplied buses.
B is wrong, powered from Diesel Generator supplied buses.
D is wrong, powered from Diesel Generator supplied buses.
NRC SUBMITTAL COPY
CPS ILTI010 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 29 BOTH 262001 A2.03 3.9 4.3 85571 .1.3.3 A.C. Electrical Distribution Cognitive Level: HIGH Ability to (a) predict the impacts of the following on Loss of off-site power the A.C. ELECTRICAL DISTRIBUTION; and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
The reactor was at 90% power.
"* 4KV BUS LOW VOLTAGE, 5008-5L alarmed
"* AC UNDERVOLTAGE SECOND LEVEL 4160V BUS, 5060-3D alarmed
"* AC UNDERVOLTAGE SECOND LEVEL 4160V BUS, 5061-3D alarmed
"* 4160V BUS lAl VOLTAGE was 4065 VAC
"* 4160V BUS IB1 VOLTAGE was 4065 VAC The loss of power to Bus IAl and Bus 1BI is (1)
These conditions will require entry into 4200.01, Loss of AC Power, Section (2).
(1) (2)
A. IMMEDIATE 4.2, Loss of ECCS Busses B. IMMEDIATE 4.4, Station Blackout (SBO)
C. DELAYED 4.2, Loss of ECCS Busses D. DELAYED 4.4, Station Blackout (SBO)
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 4200.01 rev 15 NEW] 0 Explanation:
C is correct, Degraded Voltage Relays time out in 15 seconds, will trip RAT and ERAT feeds to 1A1, 1B 1, and 1C1. Diesel Generators will Auto Start and reenergize these busses.
Loss of ECCS busses is the correct procedure, section prescribes action upon re-energization.
A is wrong, Delayed LOSS B is wrong, Delayed LOSS, Station Blackout does NOT exist.
D is wrong, Station Blackout does NOT exist.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 30 BOTH 264000 K3.02 3.9 4.0 85264 .1.4.2 Emergency Generators (Diesel/Jet) Cognitive Level: HIGH Knowledge of the effect that a loss or malfunction A.C. electrical distribution of the EMERGENCY GENERATORS (DIESEL/JET) will have on following:
With the plant in Mode 2, a Loss of Offsite Power has occurred.
The C Area operator dispatched to IB Emergency Diesel Generator Control Panel, 1PL 12JB reports the following:
ENGINE 1 HIGH COOLANT TEMP annunciator 5285-1B is LIT.
Engine 1 Jacket Water Temperature reads 210°F.
Which of the following describes the expected status of Bus 1A1 and Bus 1BI?
4160V Bus 1Al is (M,4160V Bus 1B1 is (2).
(1) (2)
A. De-energized Energized B. De-energized De-energized C. Energized Energized D. Energized De-energized ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP 85264 rev 4 New 0 Explanation:
D is correct, Jacket Water Temperature reads is ABOVE 205'F, which is an active trip.
With a LOOP given, 1B 1 is De-energized.
A is wrong, 1A Emergency Diesel Energizes 1Al, 1B Emergency Diesel is tripped, lB1 is De energized.
B is wrong, 1A Emergency Diesel Energizes 1A1 C is wrong, lB Emergency Diesel is tripped, IB1 is De-energized.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 31 BOTH 271000 A1.01 3.3 3.2 Offgas System Cognitive Level:RECALL Ability to predict and/or monitor changes in Condenser vacuum parameters associated with operating the OFFGAS SYSTEM controls including:
"* Reactor Power is 4 %
"* Main Condenser Vacuum Pump A is in service.
"* Steam Jet Air Ejector startup is in progress.
"* SJAE Suction Valve, 1CA002A is opened.
"* The operator leaves the Main Condenser Vacuum Pump in service AND does NOT SHUT Vacuum Pump Suction Valve, 1CA003.
Condenser vacuum will (1) SLOWLY because (2)
(1) (2)
A. IMPROVE SJAE Suction Valve, 1CA002A will SHUT due to an interlock B. IMPROVE of air in-leakage from the vacuum pump suction relief C. DEGRADE of air in-leakage from the vacuum pump suction relief D. DEGRADE SJAE Suction Valve, 1CA002A will SHUT due to an interlock ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 7 3215.01 rev 25e New 7 0 Explanation:
B is correct, procedure requires 1CA003 SHUT ASAP after SJAE startup.
A is wrong, will IMPROVE slowly because of air in-leakage.
C is wrong, will IMPROVE slowly because of air in-leakage.
D is wrong, will IMPROVE slowly because of air in-leakage.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 32 BOTH 272000 A2.11 3.4 3.7 85208 .1.2.6 Radiation Monitoring System Cognitive Level: HIGH Ability to (a) predict the impacts of the following on Leakage and/or breaks from the RADIATION MONITORING SYSTEM; and contaminated systems to atmosphere or (b) based on those predictions, use procedures to to other process systems correct, control, or mitigate the consequences of those abnormal conditions or operations:
"* The Reactor is operating at 90% power.
"* There is a leaking tube in the RT Non-Regenerative Heat Exchanger.
If NOT corrected, this will result in (1) alarms on the Component Cooling Water Process Radiation Monitor, 1RIX-PR037.
To control the consequences of this failure, enter (2).
(1) (2)
A. HIGH then ALERT Abnormal Release of Radioactive Liquids, 4979.05 B. ALERT then HIGH Abnormal Release of Radioactive Liquids, 4979.05 C. HIGH then ALERT Abnormal High Area Radiation Levels, 4979.02 D. ALERT then HIGH Abnormal High Area Radiation Levels, 4979.02 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 5140.49 rev 0 NEW 0 Explanation:
B is correct, reactor water leaking from RT NRHX will cause an ALERT then an ALARM, 4979.05 is the appropriate procedure.
A is wrong, will cause an ALERT then an ALARM.
C is wrong, will cause an ALERT then an ALARM, 4979.05 is the appropriate procedure.
D is wrong, 4979.05 is the appropriate procedure.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 33 BOTH 286000 K2.02 2.9 3.1 Fire Protection System Cognitive Level: RECALL Knowledge of electrical power supplies to the Pumps following:
Makeup Water Pump House MCC A has lost power.
Which one of the following components is affected?
A. Plant Service Water Seal Water Pump, OWSOIPA B. ERAT Cooling Fans, OAP164E C. Fire Protection Jockey Pump, OFP04P D. Makeup Condensate Pump A, OMC01PA ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 3213.01EO02 rev 9a NEW 0 Explanation:
C is correct per reference A,B, and D are wrong.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 34 RO 288000 A2.01 3.3 3.4 85455 .1.5.1 Plant Ventilation Systems Cognitive Level: HIGH Ability to (a) predict the impacts of the following on High drywell pressure: Plant-Specific the PLANT VENTILATION SYSTEMS; and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
The reactor was operating at rated conditions.
Drywell Pressure increased to 3.0 psig.
(1) What is the expected status of Containment Continuous Purge, and (2) what procedure governs the temperature of the area this system normally ventilates?
(1) (2)
A. RUNNING 3408.01, Containment Building/Drywell HVAC B. RUNNING EOP-6, Primary Containment Control C. ISOLATED EOP-6, Primary Containment Control D. ISOLATED 3408.01, Containment Building/Drywell HVAC ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 4001.02 rev 16 NEW 0 Explanation:
C is correct, CCP Isolates, Containment Temperature is controlled per EOP-6, Primary Containment Control. Drywell Pressure 1.68 psig is the entry condition for EOP-6.
A is wrong, CCP Isolates, Containment Temperature is controlled per EOP-6, Primary Containment Control. Drywell Pressure 1.68 psig is the entry condition for EOP-6.
B is wrong, CCP Isolates.
D is wrong, Containment Temperature is controlled per EOP-6, Primary Containment Control.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 35 BOTH 290002 Kl.17 3.3 3.4 87422 .1.1.11 Reactor Vessel Internals Cognitive Level: RECALL Knowledge of the physical connections and/or ADS cause- effect relationships between REACTOR VESSEL INTERNALS and the following:
During Safety / Relief Valve testing of an ADS valve, the QUALITY of steam in the tailpipe is (1), because the steam is tapped (2) the Steam Dryers.
(1) (2)
A. LOW BEFORE B. LOW AFTER C. HIGH BEFORE D. HIGH AFTER ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP87422 rev 0 NEW 0 Explanation:
D is correct, the quality of steam is high, due to steam tapped after the Dryers.
A is wrong, the quality of steam is high, due to steam tapped after the Dryers.
B is wrong, the quality of steam is high.
C is wrong, steam tapped after the Dryers.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 36 BOTH GENERIC 2.1.12 2.9 4.0 Cognitive Level:HIGH Conduct of Operations Ability to apply technical specifications for a system.
The reactor is at 90% power.
A Motor Operated Valve having BOTH a Containment Isolation function AND a system function has a stroke time in excess of the Limiting Value.
Which one of the following is correct?
A. Containment Isolation AND system function SHALL be declared INOPERABLE.
B. ONLY the Containment Isolation SHALL be declared INOPERABLE.
C. ONLY the system function SHALL be declared INOPERABLE.
D. Valve is considered OPERABLE, but degraded.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None OP-CL-101-302-1001 NEW 0 rev 0 Explanation: Candidate must know Limiting Value is the OPERABILITY requirement, stroke time in excess of Acceptance Range denotes degradation.
When a Containment Isolation Valve is declared INOPERABLE and IF it impairs any OTHER ITS function, THEN that function shall also be declared INOPERABLE.
B is wrong, Containment Isolation AND system function SHALL be declared INOPERABLE.
C is wrong, Containment Isolation AND system function SHALL be declared INOPERABLE.
D is wrong, Containment Isolation AND system function SHALL be declared INOPERABLE.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 37 BOTH GENERIC 2.1.17 3.5 3.6 Cognitive Level: RECALL Conduct of Operations Ability to make accurate, clear and concise verbal reports.
When reporting indicator readings, the format should be A. VALUE - CHANNEL - TREND B. PARAMETER- CHANNEL - VALUE C. PARAMETER - CHANNEL - TREND D. PARAMETER - VALUE - TREND ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None OP-AA-104-101 NEW 0 Explanation:
D is correct, reference states verbatim.
A is wrong, PARAMETER not identified.
B is wrong, TREND not identified.
C is wrong, VALUE not identified.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 38 BOTH GENERIC 2.1.30 3.9 3.4 85115 .1.4.1 Cognitive Level: RECALL Conduct of Operations Ability to locate and operate components, including local controls.
"* A 6.9kV breaker is racked in and control power fuses are installed.
"* The breaker has been remotely CLOSED.
"* The breaker's LOCAL / REMOTE SWITCH is placed in the LOCAL position.
"* The handswitch located on the cubicle door is placed in the OPEN position The breaker willAl because (2) is in effect.
(1) (2)
A. remain CLOSED remote control B. OPEN local control C. remain CLOSED local control D. OPEN remote control ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 85115 rev 0 ýNEW 0 Explanation: Breaker racked-in / connected enables REMOTE, disables LOCAL control.
A is correct, remain CLOSED, remote control is in effect.
B is wrong, remain CLOSED, remote control is in effect.
C is wrong, remote control is in effect.
D is wrong, remain CLOSED.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 39 BOTH GENERIC 2.2.28 2.6 3.5 86610 N.1.8.1 Cognitive Level: RECALL Equipment Control Knowledge of new and spent fuel movement procedures.
In accordance with 3703.01, CORE ALTERATIONS, a fuel move is considered complete when the fuel bundle has been placed in the correct location and the A. grapple has been RELEASED B. hoist loaded light goes OUT C. slack cable light is LIT D. orientation has been double verified ANS: IReference Provided: Reference and Rev: Question Source: Ques Rev A None 3703.01 rev 22b INPO 19057 Clinton 0 Explanation:
A is correct, stated in reference B is wrong, when the grapple has been released.
C is wrong, when the grapple has been released.
D is wrong, when the grapple has been released..
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 40 BOTH GENERIC 2.2.33 2.5 2.9 87401 .1.1.1 Cognitive Level: RECALL Equipment Control Knowledge of control rod programming.
The Rod Pattern Controller enforces a prescribed rod pattern from (1) rod density to (2) power.
(1) (2)
A. 0% 16.7%
B. 0% 33.3%
C. . 100% 16.7%
D. 100% 33.3%
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP 87401 rev 2 DRESDEN 115 0 Explanation: EPU numbers obtained from ITS 3.3.2.1.
BPWS applies from all rods fully inserted (100% rod density) to 16.7% power NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 41 BOTH GENERIC 2.3.2 2.5 2.9 Cognitive Level: RECALL Radiological Controls Knowledge of facility ALARA program.
Which one of the following is the LOWEST level of authority authorized to waive Independent Verification of a valve position due to ALARA concerns?
A. Radiation Protection Shift Supervisor B. Reactor Operator C. Shift Manager D. Plant Manager ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C INone 1052.01 rev 7b NEW 0 Explanation:
C is correct, Shift Manager may waive verification due to ALARA concerns.
A B and D are wrong per reference.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 42 BOTH GENERIC 2.3.10 2.9 3.3 Cognitive Level: RECALL Radiological Controls Ability to perform procedures to reduce excessive levels of radiation and guard against personnel exposure.
Which of the following describes the concern while transferring water to Radwaste from RHR A vice RHR B during Shutdown Cooling operation?
A. High Conductivity B. High Temperature C. High Radiation D. High Flowrate ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 3312.03 rev 3d NEW 0 Explanation:
C is correct, RHR A requires local valve operation which will result in radiation exposure to operators.
A is wrong, conductivity is monitored in BOTH RHR Loops.
B is wrong, temperature is controlled in BOTH RHR Loops.
D is wrong, flowrate is controlled in BOTH RHR Loops..
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Procedure hierarchy from HIGHEST to LOWEST for the following procedures is ...
- 1) Emergency Operating Procedures
- 2) Integrated Plant Operating Procedures
- 3) Off-Normal Procedures A. 1,2,3 B. 1,3,2 C. 2,3,1 D. 2,1,3 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 1005.09 rev NEW 0 Explanation:
B is correct, Emergency Operating Procedures, Off Normal Procedures, then Integrated Plant Operating Procedures are in correct order of hierarchy Distractors are not in proper order of hierarchy NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 44 BOTH GENERIC 2.4.20 3.3 4.0 87551 .1.5 Cognitive Level: RECALL Emergency Procedures and Plan Knowledge of operational implications of EOP warnings, cautions, and notes.
Emergency Operating Procedures contain CAUTIONS which are used to identify potential hazards to (1) and are placed (2) the step to which they apply.
(1) (2)
A. personnel ONLY before B. personnel ONLY after C. equipment OR personnel before D. equipment OR personnel after ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP 87551 rev 3 NEW 0 Explanation:
C is correct,EOP CAUTIONS are used to identify hazards to equipment or personnel and are placed before the step to which they apply.
A is wrong, equipment or personnel.
B is wrong, equipment or personnel and are placed before the step to which they apply.
D is wrong, are placed before the step to which they apply.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 45 BOTH GENERIC 2.4.34 3.8 3.6 Cognitive Level: HIGH Emergency Procedures and Plan Knowledge of RO tasks performed outside the main control room during emergency operations including system geography and system implications.
A Reactor Operator following Remote Shutdown, 4003.01, opened breakers CB21 through CB32 at NSPS 120VAC SOL PWR DIST PNLS A and B.
(1) Where are these panels?
(2) Predict the plant response when the breakers are opened?
(1) (2)
A. Control Building 802 Elevation The reactor will be scrammed.
B. Aux Building 781 Elevation The reactor will be scrammed.
C. Control Building 802 Elevation SRV operation will be prevented.
D. Aux Building 781 Elevation SRV operation will be prevented.
ANS: Reference Provided: I Reference and Rev: Question Source: Ques Rev A None 4003.01 rev 13 New 0 Explanation:
A is correct, NSPS Solenoid Power Distribution Panels A and B are located on the Control Building 802 Elevation, when opened, the reactor is scrammed.
B is wrong, Control Building 802 Elevation.
C is wrong, The reactor will be scrammed.
D is wrong, Control Building 802 Elevation, the reactor will be scrammed.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 46 BOTH 295006 AK1.03 3.7 4.0 SCRAM Cognitive Level: HIGH Knowledge of the operational implications of the Reactivity control following concepts as they apply to SCRAM:
"* The Mode Switch has been placed in SHUTDOWN.
"* All rods inserted EXCEPT one rod, which is stuck at notch 48.
"* SRMs AND IRMs have been inserted.
Shutdown Criteria is (1) , requiring entry into (2).
(1) (2)
A. met EOP-lA, ATWS RPV CONTROL B. met 4100.01, REACTOR SCRAM C. NOT met EOP-1 A, ATWS RPV CONTROL D. NOT met 4100.01, REACTOR SCRAM ANS: Reference Provided: Reference and Rev: 7Question Source: Ques Rev B None 4100.01 rev 17 NEW 0 Explanation:
B is correct, one rod out is the demonstration of Shutdown Margin and the reactor has met Shutdown Criteria. The required procedure is 4100.01, REACTOR SCRAM sect. 4.3.1 to direct actions for rod insertion.
A is wrong, 4100.01, REACTOR SCRAM is required.
C is wrong, Shutdown Criteria is met, 4100.01, REACTOR SCRAM is required.
D is wrong, Shutdown Criteria is met.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 47 BOTH 295008 AK2.09 3.1 3.1 High Reactor Water Level Cognitive Level: HIGH Knowledge of the interrelations between HIGH Reactor water cleanup system (ability REACTOR WATER LEVEL and the following: to drain): Plant-Specific
"* The reactor automatically scrammed due to loss of Condenser Vacuum.
"* Reactor Pressure is 400 psig and stable.
"* Condenser Vacuum is 0 inches Hg vac.
"* RPV Water Level is 100 inches AND RISING.
"* CRD is injecting at 40 gpm.
"* Main Condenser Low Vacuum Bypass Switches are in NORMAL.
Which is the SMALLEST valve that can be used to LOWER RPV Water Level to 30 inches?
A. Inboard MSIV Before Seat Warmup Drain Valve, 1B21-F016 B. Main Turbine Bypass Valve # 1 C. Reactor Water Cleanup Drain Flow Regulator, 1G33-F033 D. RHR B to Radwaste First Isolation Valve, 1E12-F049 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 3303.01 rev 25a INEW 0 Explanation: Condenser Vacuum at 0 inches Hg vac implies a Group 1 Isolation C is correct, RWCU can be used to reject to the Condenser.
A is wrong, Group 1 Isolation prevents using 1B21-F0 16.
B is wrong, Group 1 Isolation prevents using Bypass Valves D is wrong, RHR SDC valves are interlocked SHUT due to Reactor Pressure.
NRC SUBMITTAL COPY
CPS ILTOI11 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 48 BOTH 295009 AK1.01 2.7 2.9 87570 .1.1.1 Low Reactor Water Level Cognitive Level: HIGH Knowledge of the operational implications of the Steam carryunder following concepts as they apply to LOW REACTOR WATER LEVEL:
One of the Turbine Driven Reactor Feed Pumps is inadvertently TRIPPED while the plant is at 90% power.
(1) Which of the following is the concern?
(2) Predict the effect on the plant from this condition?
(1) (2)
A. CARRYOVER Excess moisture impinging the blades of the Main Turbine.
B. CARRYOVER A reduction in the margin to transition boiling.
C. CARRYUNDER Excess moisture impinging the blades of the Main Turbine.
D. CARRYUNDER A reduction in the margin to transition boiling.
Question Source: Ques Rev None LP87570 rev 1 Modified DAEC 98 0 AUDIT Q#4 ion:
C is correct, carryunder results from lowering water level results in moisture impingement.
A is wrong, carryunder results.
B is wrong, carryunder results from lowering water level results in moisture impingement D is wrong, results in moisture impingement.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 49 BOTH 295010 AA1.07 3.2 3.4 85405 High Drywell Pressure Cognitive Level: HIGH Ability to operate and/or monitor the following as Containment (drywell) atmosphere they apply to HIGH DRYWELL PRESSURE: control A LOCA has occurred.
The control switches for CGCS Hydrogen Mixing Compressors 1A AND lB are taken to START.
One minute later the operator observed that CGCS Hydrogen Mixing Compressor 1A D/P is slightly above 4 psid and CGCS Hydrogen Mixing Compressor lB D/P is slightly above 6 psid.
This indicates CGCS Hydrogen Mixing Compressor A. 1A failed to start B. 1B failed to start C. IA started but the suction valve failed to OPEN D. 1B started but the suction valve failed to OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP85405 rev 2 NEW 0 Explanation:
D is correct, CGCS Hydrogen Mixing Compressor 1B High D/P indicates suction valve did not open.
A is wrong, CGCS Hydrogen Mixing Compressor IA indicates normal D/P.
B is wrong, CGCS Hydrogen Mixing Compressor lB High D/P indicates suction valve did not open.
C is wrong. CGCS Hydrogen Mixing Compressor 1A indicates normal D/P.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 50 BOTH 295010 AK2.03 3.0 3.1 85405 .1.1.3 High Drywell Pressure Cognitive Level: HIGH Knowledge of the interrelations between HIGH Drywell/containment differential DRYWELL PRESSURE and the following: pressure: Mark-III The following conditions exist:
.. Drywell Pressure is 2.2 psig
- Containment Pressure is 2.8 psig The Drywell Vacuum Relief Valves, 1HG10A and 1HG1 IA are (1).
These valves also provide a flowpath that is required by the CGCS Hydrogen (2).
(1) (2)
A. SHUT Recombiners B.OPEN Mixing Compressors C. SHUT Mixing Compressors D. OPEN Recombiners ANS: Reference Provided: ýReference and Rev: Question Source:
Q Ques Rev B _None 85405 rev 2 NEW 0 Explanation: Vacuum Reliefs are fully OPEN at -0.5 psid Drywell to Containment D/P.
B is correct, fully OPEN, also provide a flowpath for Mixing Compressors.
A is wrong, fully OPEN, also provide a flowpath for Mixing Compressors.
C is wrong, fully OPEN.
D is wrong, also provide a flowpath for Mixing Compressors.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 51 BOTH 295012 AK3.01 3.5 3.6 High Drywell Temperature Cognitive Level: RECALL Knowledge of the reasons for the following Increased drywell cooling responses as they apply to HIGH DRYWELL TEMPERATURE:
EOP-6, Primary Containment Control requires starting additional Drywell Coolers and Supplemental Coolers to prevent jeopardizing integrity.
A. RPV Level Instrument B. Safety Relief Valve C. Recirc Pump Seal /
D. Primary Containment ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None EOP Bases 8-2 NEW 0 Explanation:
D is correct, to prevent jeopardizing Primary Containment integrity.
A is wrong, to prevent jeopardizing Primary Containment integrity.
B is wrong, to prevent jeopardizing Primary Containment integrity.
C is wrong, to avoid jeopardizing Primary Containment integrity.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective w
52 RO 295038 EK2.05 3.7 4.7 High Off-Site Release Rate Cognitive Level: RECALL Knowledge of the interrelations between HIGH Site Emergency Plan OFF-SITE RELEASE RATE and the following:
What is the LOWEST level of the Emergency Plan that would require entry into S . ..
EOP-9, Radioactivity "i " "i i Release
- i i . .. . Control?
_ _ _ -i* .. . . . . .
A. Unusual Event B. Alert C. Site Area Emergency D. General Emergency ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B I None 4406.01 rev 26 New 0 Explanation:
B is correct, Alert is the LOWEST activation level requiring EOP-9 entry.
A is wrong, no entry required.
C is wrong, not the LOWEST activation level.
D is wrong, not the LOWEST activation level.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 53 BOTH 295013 AK3.01 3.6 3.8 LP85205 .1.9.2 High Suppression Pool Temperature Cognitive Level: RECALL Knowledge of the reasons for the following Suppression pool cooling operation
_ _responses as they apply to HIGH SUPPRESSION POOL TEMPERATURE:
EOP-6 PIARY CONTAI -NMENT CONTROL, INITIALLY requires oeaino Suppression Pool Coolng Mode to preserve______ requirements.
A. ECCS pump NPSH B. SF Filter Demin Resin C. DBA LOCA analysis D. ECCS suction piping AXTCI In f 1'. 1 I . n . -
fINq : lererence Provided: Reference and Kev: Question Source: Ques Rev C None LP85205 rev 6 NEW Explanation: 0 C is correct, DBA LOCA analysis is dependent on Suppression Pool Temperature at 95°F.
A is wrong, DBA LOCA analysis.
B is wrong, DBA LOCA analysis.
D is wrong, DBA LOCA analysis.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 54 BOTH 295015 AK2.08 3.6 3.7 87512 .1.11 Incomplete SCRAM Cognitive Level: HIGH Knowledge of the interrelations between Neutron monitoring system INCOMPLETE SCRAM and the following:
During an ATWS, Nuclear Instruments are (linserted, so that (2) can be determined.
(1) (2)
A. automatically Shutdown Criteria B. automatically Power Leg actions C. manually Shutdown Criteria D. manually Power Leg actions ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 4100.01 rev 18 NEW 0 Explanation: Shutdown criteria is dependent upon Control Rod positions, Reactor Power
< IRM Range 7 and lowering is a Power Leg EXIT criteria.
D is correct, Nuclear instruments are MANUALLY inserted, to determine power leg actions.
A is wrong, Nuclear instruments are MANUALLY inserted, to determine power leg actions.
B is wrong, Nuclear instruments are MANUALLY inserted.
C is wrong, inserted to determine power leg actions.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 55 BOTH 295016 AA1.06 4.0 4.1 85433 .1.4.6 Control Room Abandonment Cognitive Level: HIGH Ability to operate and/or monitor the following as Reactor water level they apply to CONTROL ROOM ABANDONMENT:
'The Control Room abandonment is in progress.
Actual Reactor Water Level is +55 inches.
Reactor Pressure is 1000 psig.
BOTH Reactor Recire Pumps have been tripped.
NO Transfer Switches have been repositioned on the Remote Shutdown Panel.
Reactor Water Level Meter on the Remote Shutdown Panel will indicate (1) because (2).
A. downscale a Transfer Switch requires repositioning
_______B. accurately NO Transfer Switch operation is required and Calibration Conditions are established S C* . upscale NO Transfer Switch operation is required and Calibration Conditions are NOT present
/ D. upscale a Transfer Switch requires repositioning ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev BI None LP 85433 rev 2 NEW 0 Explanation:
B is correct, indicates accurately, requires NO Transfer Switch, cal conditions are present.
A is wrong, indicates accurately, requires NO Transfer Switch.
C is wrong, indicates accurately, cal conditions are present.
D is wrong, indicates accurately, requires NO Transfer Switch, cal conditions are present.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 56 BOTH 295016 AA2.04 3.9 4.1 85433 Control Room Abandonment Cognitive Level: HIGH Ability to determine and/or interpret the following Suppression pool temperature as they apply to CONTROL ROOM ABANDONMENT:
On the Remote Shutdown Panel, there are a total of () Suppression Pool Temperature
-- indicators.
When an SRV is OPENED from the Remote Shutdown Panel, (2) of the indicators will RISE more than the others.
(1) (2)
A. 3 1 1B. 3 2 C. 6 1 D. 6 2__ _ __ _
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP 85433 rev 2 _FNEW 0 Explanation: 3 SRVs each have 2 Suppression Pool temperature indicators near their tailpipes for a total of 6. 2 will rise more than the others when an SRV is OPENED.
D is correct, there are 6 indicators of Local Suppression Pool Temperature at SRV Discharges, 2 will rise more than the others when an SRV is OPENED.
A is wrong, there are 6 indicators of Local Suppression Pool Temperature at SRV Discharges, 2 will rise more than the others when an SRV is OPENED.
B is wrong, there are 6 indicators of Local Suppression Pool Temperature at SRV Discharges.
C is wrong, 2 will rise more than the others when an SRV is OPENED.
'1 ' ' 111 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 57 BOTH 295018 AK2.02 3.4 3.6 Partial or Complete Loss of Component Cooling Cognitive Level: HIGH Water Knowledge of the interrelations between PARTIAL Plant operations OR COMPLETE LOSS OF COMPONENT COOLING WATER and the following:
The reactor is operating at 90% power.
"* RECIRC MOTOR A WINDING COOLING WATER FLOW LOW, 5003-3D alarms.
"* RECIRC MOTOR B WINDING COOLING WATER FLOW LOW, 5003-3K alarms.
"* The B Reactor Operator reports ALL CCW Pumps have tripped and WILL NOT restart.
A (1) is required.
The Main Steam Isolation Valves WILL (2) during the plant cooldown.
S.................. (1)(2) ............. . . . _._-
A. Rapid Plant Shutdown remain OPEN
.B. Reactor Scram be SHUT C. Rapid Plant Shutdown be SHUT D. Reactor Scram remain OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3212.01 rev 25c NEW 0 Explanation: With a TOTAL loss of CCW, Recirc Pumps must be secured within one minute, which requires Reactor Scram, the MSIVs will be SHUT due to loss of Service / Instrument Air (SA Compressors will trip on low CCW pressure).
B is correct, Reactor Scram is required, MSIVs will be SHUT.
A is wrong, Reactor Scram is required, MSIVs will be SHUT.
C is wrong, Reactor Scram is required.
D is wrong, MSIVs will be SHUT.
NRC SUBMITTAL COPY
CPS TTTfllfll N1W Wu4ffan A.'td VT S Att'flK 1'vm MJaSflhS Q# Exam System # KA # RO SRO LP # Objective 58 BOTH 295021 AK1.02 3.3 3.4 87422 .1.4.6 Loss of Shutdown Cooling Cognitive Level: HIGH Knowledge of the operational implications of the Thermal stratification following concepts as they apply to LOSS OF SHUTDOWN COOLING:
The Reactor is in MODE 4.
S- 'tz BOTV= eactor Recirculation Pumps are secured.
Or- are secured.
Reactor Water Cleanup is NOT in service.
A Group 3 Isolation has occurred on low reactor water level.
Reactor Water Level is now +7 inches Narrow Range.
Which one of the following actions is required?
-a+Maintain reacNtor water level between +7 and +30 inches on Narrow Range to restart RHR in Shutdown Coling Mode..
B. Starting Reactor Water Cleanup with suction from the Recirc Loops ONLY to prevent thermal stratification.
__C.' Raise reactor water level to 44 inches on Shutdown Range to prevent thermal stratification.
D. Start Reactor Water Cleanup with suction from the bottom head drain ONLY to increase core flow.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 4006.01 rev 4 INPO 15970 VY 0 Significantly modified Explanation:
C is correct, It is required to raise level to 44 inches on Shutdown Range to establish Natural Circulation.
A is wrong, 44 inches on Shutdown Range.
B is wrong, Recirc Loop Suction WILL NOT circulate inside the shroud.
D is wrong, does not establish circulation.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 59 BOTH 295023 2.4.10 3.0 3.1 Refueling Accidents Cognitive Level: RECALL Emergency Procedures and Plan Knowledge of annunciator response procedures.
DROPPED FUEL BUNDLE WARNING SYSTEM DW 767 AZ 120 is in HIGH ALARM.
The B Reactor Operator has verified that the monitor has NOT spiked.
It is required by CPS No. 4979.07, Dropped Fuel Bundle, to A. verify Standby Gas Treatment System is operating B. notify RP to perform surveys near the ARM C. direct the Refuel SRO to recover the dropped fuel bundle D. evacuate the Drywell and Containment ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 5140.17 rev 0 NEW 0 Explanation:
D is correct, 5140.17 requires evacuation of the Drywell and Containment.
A is wrong, no initiation signal for VG Auto Start has been provided.
B is wrong, surveys ONLY required if monitor HAS spiked.
C is wrong, 5140.17 requires evacuation of the Drywell and Containment.
=
U
-I-NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 60 BOTH 295024 EA1.03 4.0 3.9 85209 .1.5.2 High Drywell Pressure Cognitive Level: HIGH Ability to operate and/or monitor the following as LPCS: Plant-Specific they apply to HIGH DRYWELL PRESSURE:
- Drywell Pressure is 1.7 psig I_ ... Reactor Pressure is 700 psig Wa is Wthe Lexdstas o-20"Wide Ranges What is the expected status of the Low Pressure Core Spray System?
LPCS Pump LPCS Injection Valve 1E21-F005 A. ON OPEN B. OFF SHUT C. ON SHUT D. OFF OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP 85209 rev 3 New 0 Explanation:
C is correct, LPCS Pump starts when Drywell Pressure reaches 1.68 psig. 1E2 1-F005 remains SHUT until 472 psig.
A is wrong, 1E21-F005 remains SHUT until 472 psig.
B is wrong, LPCS Pump starts when Drywell Pressure reaches 1.68 psig D is wrong, LPCS Pump starts when Drywell Pressure reaches 1.68 psig, 1E21-F005 remains SHUT until 472 psig.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 61 BOTH 295024 EK1.02 3.9 4.1 High Drywell Pressure Cognitive Level: HIGH Knowledge of the operational implications of the Containment building integrity: Mark following concepts as they apply to HIGH III DRYWELL PRESSURE:
At 1000, the reactor was operating at 90% power At 1001, Drywell Pressure is 3 psig.
At 1003, the expected positions of the following valves are:
Main Steam Line A Inboard Equipment Drain Sump Discharge MSIV, B21-F022A Containment Outboard Valve, 1RE022 A. SHUT SHUT S.- B------B. SHUT OPEN C. OPEN OPEN 0PE SHUT ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 4001.02 rev 14 New 0 Explanation:
D is correct, MSIV OPEN, Equipment Drain Valve SHUT.
A is wrong, MSIV OPEN.
B is wrong, MSIV OPEN, Equipment Drain Valve SHUT.
C is wrong, Equipment Drain Valve SHUT.
NRC SUBMITTAL COPY
CPS ILT010 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 62 BOTH 295025 EK3.06 4.2 4.4 87212 .1.1.2 High Reactor Pressure Cognitive Level: RECALL Knowledge of the reasons for the following Alternate rod insertion: Plant-Specific responses as they apply to HIGH REACTOR PRESSURE:
I Logic actuates at +/-!k psig to _Z_.
(1) (2)
A. 1127 provide an alternate means of initiating a scram B. 1127 prevent exceeding the RPV Design Pressure C. 1065 provide an alternate means of initiating a scram
-~ ~ ~ ~ D. D 1065
,, 1065L, "I,,,,,,, . ..... ... prevent exceeding the RPV Design Pressure
- -. . .4R..JS.LL U 421L.RUJSL iflhIjIUt.L I ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 87212 rev 1 New 0 Explanation:
A is correct per reference.
B is wrong, ARI is not considered in overpressure protection (not Safety Related).
C is wrong, actuates at 1127.
D is wrong,. actuates at 1127, ARI is not considered in overpressure protection (not Safety Related)
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 63 BOTH 295026 EK1.01 3.0 3.4 85726 K1.10 Suppression Pool High Water Temperature Cognitive Level: HIGH Knowledge of the operational implications of the Pump NPSH following concepts as they apply to SUPPRESSION POOL HIGH WATER TEMPERATURE:
7 RCIC is injecting to the RPV at 600 gpm.
.. R.C.C o flJf.Ti.*
- Suction ned to the Suppression Pool.
As Suppression Pool Temperature RISES, Net Positive Suction Head to the RCIC Pump (1).
To reverse the trend in Net Positive Suction Head, (2).
(1) (2)
A. LOWERS adjust the RCIC Flow Controller to 700 gpm
-.LOWEIS* transfer suction to the RCIC Storage Tank C.,. RISES adjust the RCIC Flow Controller to 700 gpm D. RISES transfer suction to the RCIC Storage Tank 77 7 ANB: JReference Provided: Reterence and Rev: Question Source: Ques Rev B None LP 85726 rev 3 NEW 0 Explanation: RISING Suppression Pool Temperature LOWERS NPSH to RCIC Pump.
RCIC Storage Tank offers higher elevational head and cooler water than the Suppression Pool which will RAISE NPSH.
B is correct, RISING Suppression Pool Temperature LOWERS NPSH to RCIC Pump.
RCIC Storage Tank will RAISE NPSH.
A is wrong, transferring to the RCIC Storage Tank will RAISE NPSH.
C is wrong, RISING Suppression Pool Temperature LOWERS NPSH to RCIC Pump.
RCIC Storage Tank will RAISE NPSH.
D is wrong, RISING Suppression Pool Temperature, LOWERS NPSH to RCIC Pump.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 64 BOTH 295027 EK3.01 3.7 3.8 High Containment Temperature (Mark III Cognitive Level: RECALL Containment Only)
Knowledge of the reasons for the following Emergency depressurization: Mark-III responses as they apply to HIGH CONTAINMENT TEMPERATURE (MARK III CONTAINMENT ONLY):
Why does EOP-6, PRIMARY CONTAINMENT CONTROL require a BLOWDOWN if Primary Containment Temperature CANNOT be held below 185°F?
A. To prevent exceeding the Primary Containment Design Temperature.
B. To ensure stable steam condensation.
094 To ensure ADS Solenoids will still be functional.
D. To prevent exceeding the Drywell Design Temperature.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None EOP Bases 8-3 rev 3 NEW 0 Explanation:
A is correct, BLOWDOWN is required to prevent exceeding Primary Containment Design Temperature.
B is wrong, to prevent exceeding Primary Containment Design Temperature.
C is wrong, to prevent exceeding Primary Containment Design Temperature.
D is wrong, to prevent exceeding Primary Containment Design Temperature.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP . Objective 65 BOTH 295028 EK3.05 3.6 3.7 High Drywell Temperature Cognitive Level: RECALL Knowledge of the reasons for the following Reactor SCRAM responses as they apply to HIGH DRYWELL TEMPERATURE:
The reason for scramming the reactor BEFORE Drywell Temperature reaches 330°F is .... _
A. to reduce RPV Level instrument inaccuracies B. to reduce the rate of heat input to the drywell C. to allow Reactor Recirculation pumps to be shutdown before seal damage occurs
-D. to allow the MSIVs to be SHUT before exceeding their design temperature ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None EOP Bases 8-7 rev 3 NEW 0 Explanation:
B is correct, reference states verbatim.
A is wrong, RPV Level accuracy is unaffected by scram.
C is wrong, RR Pump trip is not addressed in EOP-6.
D is wrong, MSIVs should be left OPEN so that Anticipation of Emergency Depressurization in EOP-1 can be performed.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 66 BOTH 295029 EK1.01 3.4 3.7 High Suppression Pool Water Level Cognitive Level: RECALL Knowledge of the operational implications of the Containment integrity
- U -E following concepts as they apply to HIGH SUPPRESSION POOL WATER LEVEL:
Opening SR*s while Suppression Pool Water Level is above Figure Q, SRV Tail Pipe Limit may produce a failure that results in_________________
A. actuation of Suppression Pool Makeup B. steam entrainment in pump suctions C. direct pressurization of the containment D. invalid actuation of ECCS systems ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C EOP-6 Figure Q . EOP Bases 8-18 NEW 0 Explanation:
C is correct, operation of SRVs while above the SRV Tail Pipe Limit may result in Tail Pipe failure which results in direct pressurization of the containment.
A is wrong, Suppression Pool Makeup results from Low Suppression Pool Water Level.
B is wrong, pump suctions are separated from SRV Tailpipes.
D is wrong, pressurization of the Containment / Drywell would result in valid ECCS signal.
NRC SUBMITTAL COPY
CPS ILTI010 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 67 BOTH 295031 EA1.08 3.8 3.9 Reactor Low Water Level Cognitive Level: RECALL Ability to operate and/or monitor the following as Alternate injection systems: Plant they apply to REACTOR LOW WATER LEVEL: specific ch one ofthe following requires LOCAL operation to accomplish injection to the reactor?
A. LPCS / RHR A Water Leg Pump B. Fire Protection C. Shutdown Service Water D. Standby Liquid Control from the Storage Tank ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 4411.03 rev 6 NEW 0 Explanation:
B is correct, Fire Protection requires Local operation.
A is wrong, can be performed from Main Control Room.
C is wrong, can be performed from Main Control Room.
D is wrong, can be performed from Main Control Room.
r NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 68 BOTH 295031 EK2.01 4.4 4.4 85423 .1.7.5 Reactor Low Water Level Cognitive Level: HIGH Knowledge of the interrelations between Reactor water level indication REACTOR LOW WATER LEVEL and the following:
0 Reactor Pressure is 1000 psig.
0 RPV Level is -170 inches Fuel Zone.
INDICATED RPV Level on Fuel As the reactor cools down, Fuel Zone is (1) than ACTUAL Level. Zone becomes (2) accurate.
A. HIGHER LESS B. HIGHER MORE C. LOWER LESS D.'7 LOWER MORE ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP 85423 rev 2 NEW 0 Explanation:
D is correct, calibration conditions for Fuel Zone are 2121F, 0 psig. While pressurized, Fuel Zone indicates LOWER than actual level due to LOWER density water in the variable leg.
As cooldown progresses, Fuel Zone becomes MORE accurate.
A is wrong, indicates LOWER than actual level, becomes MORE accurate.
B is wrong, indicates LOWER than actual level.
C is wrong, becomes MORE accurate.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 69 RO 295033 EA1.03 3.8 3.8 High Secondary Containment Area Radiation Levels Cognitive Level: HIGH Ability to operate and/or monitor the following as Secondary containment ventilation they apply to HIGH SECONDARY CONTAINMENT AREA RADIATION LEVELS:
"11j___;111 1
. At 10:00, Defeating VF Interlocks, 4410.00C01 1, was completed.
- At 10:15, Fuel Building Ventilation (VF) was RESTARTED.
- At 10:45, 1RIX-PRO06A,B,C, AND D FUEL BUILDING EXHAUST Process Radiation Monitors increased to the HIGH ALARM setpoint.
At 11:00, Fuel Building Ventilation is (1) AND Standby Gas Treatment System is (2)?
(1) (2)
A. RUNNING in STANDBY B. RUNNING RUNNING C. TRIPPED RUNNING
,D. TRIPPED in STANDBY ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 441OC011 rev 4 NEW 0 Explanation:
C is correct. 4410.OOCO1 1 defeats RPV Level 2 and High Drywell Pressure Trips ONLY. This defeat does NOT affect High Radiation Trip / Isolation of VF OR High Radiation Auto Start of VG. Fuel Building Exhaust HIGH Radiation will trip VF AND Auto Start VG.
A is wrong, VF is TRIPPED, VG is RUNNING.
B is wrong, VF is TRIPPED.
D is wrong, VG is RUNNING.
-I _ .=_ ._._:._ _ _ _ _ _ ___.... L_____..... _-" _-- . _.*.. ..
NRC SUBMITTAL COPY M
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP# Objective 70 BOTH 295034 EA1.05 3.8 3.8 Secondary Containment Ventilation High Radiation Cognitive Level: HIGH Ability to operate and/or monitor the following as Fuel building ventilation: Plant they apply to SECONDARY CONTAINMENT Specific VENTILATION HIGH RADIATION:
Containment Continuous Purge Exhaust Radiation reads 120 mR/hr.
What is the expected status of the following?
(1) Fuel Building (2)Standby GasTreatment System Exhaust Isolation Damper Accident Range Monitor (AXM),
1VF09Y. ORIX-PR008.
(1) (2)
A. SHUT RUNNING B. SHUT IN STANDBY C. OPEN RUNNING 1J. UOEN IN STANDBY ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 3319.01 revl4 NEW 0 Explanation:
A is correct, lVF09Y shuts as Fuel Building Vents ISOLATE, the AXM 0RIX-PRO08 is RUNNING.
B is wrong, AXM ORIX-PRO08 is RUNNING.
C is wrong, IVF09Y shuts.
D is wrong, 1VF09Y shuts, AXM ORIX-PR008 is RUNNING..
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 71 BOTH 295035 EK2.01 3.6 3.6 85449 .1.3.3 Secondary Containment High Differential Pressure Cognitive Level: HIGH Knowledge of the interrelations between Secondary containment ventilation SECONDARY CONTAINMENT HIGH DIFFERENTIAL PRESSURE and the following:
Secondary Containment Differential Pressure is NORMALLY maintained by the (1)
Ventilation System, if Differential Pressure is +0.5 inches of water, it is required to (2)
(1) (2)
A. Auxillary Building enter EOP-8, Secondary Containment Control B. Auxiliary Building start additional exhaust fans C. Fuel Building enter EOP-8, Secondary Containment Control
.D. Fuel Building start additional exhaust fans ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 7 85449 NEW 0 Explanation:
C is correct, Fuel Building Ventilation maintains D/P, it is required to enter EOP-8.
A is wrong, Fuel Building Ventilation maintains D/P.
B is wrong, Fuel Building Ventilation maintains D/P, it is required to enter EOP-8..
D is wrong, it is required to enter EOP-8.
NRC SUBMITTAL COPY
--- - .. CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 72 BOTH 295036 EA1.03 2.8 3.0 85304 Secondary Containment High Sump/Area Water Cognitive Level: HIGH Level Ability to operate and/or monitor the following as Radwaste they apply to SECONDARY CONTAINMENT HIGH SUMP/AREA WATER LEVEL:
Reactor power is 90%.
Suppression Pool Level is 20 feet.
The HPCS Pump Discharge Pressure Instrument sensing line is leaking.
This water is coming from the (1) and will accumulate in a sump and then will be pumped to the (2Floor Drain Tank.
(1) (2)
A. RCIC Storage Tank Fuel Building B. RCIC Storage Tank Aux Building C. Suppression Pool Fuel Building D. Suppression Pool Aux Building ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP85304 rev 1 NEW 0 LP85380 rev 2 Explanation:
D is correct HPCS suction has swapped to the Suppression Pool, pumped to the Aux Building Floor Drain Tank. the HPCS Sump pumps to the Aux Building Floor Drain Tank.
A is wrong, pumped to the Aux Building Floor Drain Tank.
B is wrong, Suppression Pool.
C is wrong, Suppression Pool, pumped to the Aux Building Floor Drain Tank.
-, mm NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Exam System # KA # RO SRO LP # Objective Q# BOTH 295038 EA1.01 3.9 4.2 73 High Off-Site Release Rate Cognitive Level: HIGH Ability to operate and/or monitor the following as Stack-gas monitoring system: Plant they apply to HIGH OFF-SITE RELEASE RATE: Specific
-On the A ~R Di-spl ay, the Common station UVAC Exhaust Stack Monitor, 0R1X-~R0
_=L ndicat!ng tileisRED.
The Accident Range HVAC Monitor, ORIX-PRO 12 should be in(l1).
If it is verified that this indication is NOT due to a spike, it is immediately required to enter (2).
(1) (2)
-A. stan4dby EOP-9, Radioactivity Release Control 1B. standby Abnormal Release of Airborne Radioactivity, 4979.01 S.C. operation EOP-9, Radioactivity Release Control
___ D. o peration Abnormal Release of Airborne Radioactivity, 4979.01 ANS: Reference Provided: Reference and Rev: I Question Source: Ques Rev D None LP 85273 rev 2 NEW 0 Explanation: RED Tile implies HIGH Alarm. ORIX-PROO1in High Alarm starts ORIX-PRO 12.
D is correct, 0RIX-PRO12 is in operation, enter Abnormal Release of Airborne Radioactivity.
A is wrong, ORIX-PR012 is in operation, enter Abnormal Release of Airborne Radioactivity.
B is wrong, ORIX-PRO 12 is in operation.
C is wrong, enter Abnormal Release of Airborne Radioactivity.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 74 BOTH 400000 A3.01 3.0 3.0 85208 .1.4.1 Component Cooling Water System (CCWS) Cognitive Level: RECALL Ability to monitor automatic operations of the Setpoints on instrument signal levels CCWS including: for normal operations, warnings, and I trips that are applicable to the CCWS As Component Cooling Water (CC) System Expansion Tank Level LOWERS through inches, ALL running Component Cooling Water (CC) Pumps will TRIP.
A. 12 B. 18 C. 24 D. 30 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None LP 85208 rev 4 NEW 0 Explanation:
S..C is correct, CC Pumps trip at 24 inches in the CC Expansion Tank.
in
- .--- &-=.t -- - ...- . - .-------------. I
=
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 75 BOTH 500000 EK1.01 3.3 3.9 High Containment Hydrogen Concentration Cognitive Level: RECALL Knowledge of the operational implications of the Containment integrity following concepts as they apply to HIGH CONTAINMENT HYDROGEN CONCENTRATIONS:
kft 991 1ý ft M W SWhen the containment Deflagration Limit is exceeded, starting the Hydrogen Recombiners is A. NOT permitted, because hydrogen ignition sources must be eliminated B. NOT permitted, because inadequate hydrogen exists to support recombination C. REQUIRED, because it will reduce hydrogen concentration D. REQUIRED, because it will prevent a detonable hydrogen mixture I I ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None EOP Bases 9-13 NEW 0 Explanation:
A is correct, Starting Recombiners is NOT permitted, ignition sources are required to be eliminated, resultant pressures could exceed structural capability of the containment.
B is wrong, hydrogen concentration is in EXCESS of vendor specified maximum for Recombiner operation, equipment damage could result.
C is wrong, NOT permitted, because hydrogen ignition sources must be eliminated.
D is wrong, NOT permitted, because hydrogen ignition sources must be eliminated.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 76 BOTH 500000 EK3.02 2.8 3.0 High Containment Hydrogen Concentration Cognitive Level: RECALL ON Knowledge of the reasons for the following Operation of drywell recirculating fans responses as they apply to HIGH PRIMARY CONTAINMENT HYDROGEN CONCENTRATIONS:
EOP-7, Hydrogen Control, requires operation of mixers when hydrogen is detected in the drywell because they A. catalytically recombine hydrogen and oxygen, reducing the concentration of hydrogen in the drywell B. are an ignition source, and are used in the event that hydrogen igniters have failed to ignite hydrogen C. lower drywell pressure prior to the ignition expected when hydrogen igniters are energized
-- D. redistribute hydrogen throughout the containment and crywell, reducing localized .. _ .. .
concentration ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None EOP Bases 9-9 rev 3 NEW 0 Explanation:
D is correct, redistribute hydrogen throughout the containment and drywell, reducing localized concentration.
A is wrong, but describes operation of hydrogen recombiners.
B is wrong, but describes why hydrogen must be below Deflagration Limit prior to starting mixers.
C is wrong, but mixers do lower drywell pressure during operation.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 77 BOTH 600000 AK1.02 2.9 3.1 85286 rev 3 .1.2.3 Plant Fire On Site Cognitive Level: RECALL Knowledge of the operation applications of the Fire Fighting following concepts as they apply to Plant Fire On Site:
Io establish fire righting water pressure in the Containment, it is required to (1) breakers for S1FPO51, 1FP054, IFP078, and 1FP079, so that these valves may be (2).
(1) (2)
A. OPEN OPENED B. OPEN SHUT C. CLOSE OPENED D. CLOSE SHUT ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 1893.04 rev 9d NEW 0 Explanation:
C is correct, MOVs 1FP051, 1FP054, 1FP078, and 1 FP079 breakers are normally OFF, require their power breakers turned ON and are required to be OPEN to provide water to hose stations.
A is wrong, breakers turned ON.
B is wrong, breakers turned ON and OPEN.
D is wrong, OPEN.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 78 BOTH 600000 AK3.04 2.8 3.4 85567 .1.7 Plant Fire On Site Cognitive Level: RECALL Knowledge of the reasons for the following Actions contained in the abnormal responses as they apply to PLANT FIRE ON SITE: procedure for plant fire on site When the Diesel Generator Fire Protection System Alarm sounds, it is required for personnel T to EXIT the Diesel Generator Room because
-A. Water may cause electrical shorts B. Dry Chemical extinguishing agent is an irritant C. Halon is a carcinogen D. Carbon Dioxide will cause suffocation ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP 85567 rev 2 NEW 0 Explanation:
D is correct, Carbon Dioxide will cause suffocation.
A is wrong, Carbon Dioxide is the installed fire suppression agent.
B is wrong, Carbon Dioxide is the installed fire suppression agent.
C is wrong, Carbon Dioxide is the installed fire suppression agent.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 79 RO 201001 A3.07 3.3 3.3 Control Rod Drive Hydraulic System Cognitive Level: RECALL Ability to monitor automatic operations of the HCU accumulator pressure/level CONTROL ROD DRIVE HYDRAULIC SYSTEM including:
Control Rod 28-29 Hydraulic Control Unit Nitrogen Pressure is 1500 psig, this will result in a(n) Alarm.
A. Low CRD Charging Water Header Pressure B. Accumulator Trouble C. Rod Control and Information System Inop D. High CRD Drive Water Filter D/P ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 5006-IH rev 32 NEW 0 Explanation:
B is correct, Low HCU Nitrogen Pressure is one input to the Accumulator Trouble alarm.
A is wrong, but sustained Low Charging Pressure CAN cause HCU pressure to drop.
C is wrong, but loss of RC&IS power CAN cause Accumulator Trouble alarm.
D is wrong, but high Drive Water Filter D/P can result in lower Charging Pressure.
S.
. . .. ." . . . . .. ... _ . .. . . .. . z:_ * "* .5...." .
...:,] .. ' ¢ ii:* 2: . ... ... ... . ": "': 222 2 222!Z* i ": : = - -:- - -. ... -
- i~g :. . .. ...
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 80 RO 201003 K5.07 3.3 3.6 85756 Control Rod and Drive Mechanism Cognitive Level: HIGH Knowledge of the operational implications of the How control rod movements affect following concepts as they apply to CONTROL core reactivity ROD AND DRIVE MECHANISM:
Reactor power is 1Xl 04 Counts Per Second with a 90 second period indicated on SRMs.
The Reactor Operator moves a control rod from notch 08 to notch 04.
Reactor period will A. get longer B. get shorter
, e D. cause an alarm ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 85756 NEW 0 Explanation:
A is correct, rod insertion will slow down the rate of power rise, or lengthen reactor period.
B is wrong, lengthen C is wrong, lengthen D is wrong, lengthen NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 81 RO 202001 K2.01 3.2 3.2 85202 Recirculation System Cognitive Level: RECALL Knowledge of electrical power supplies to the Recirculation pumps: Plant-Specific following:
Yorspeed.
Recirculation Pump ...
A is powered from (1) when in FAST speed, and 2 whe when in (1) (2)
(1)
A. 6.9 KV Bus IA 4.16 KV Bus IA B. 4.16 KV Bus IA 4.16 KV Bus 1AI C. 6.9 KV Bus 1A 4.16 KV Bus lAl D. 4.16 KV Bus 1A 6.9 KV Bus 1A ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP85202 rev 2 NEW 0 Explanation:
A is correct, reference states verbatim, FAST 6.9KV Bus I1A, SLOW 4.16KV Bus 1A
--1 ..-
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 82 RO 202002 A2.02 2.9 3.0 Recirculation Flow Control System Cognitive Level: HIGH Ability to (a) predict the impacts of the following on Loss of A.C.
the RECIRCULATION FLOW CONTROL SYSTEM; and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
Reactor is at 90% power.
Both Recirc Flow Control Valves are at 75%.
If AC Power to BOTH subloops for FCV B were lost, what would be the expected valve response AND what action would be taken to mitigate the consequences of this event?
(1) Valve motion would be inhibited but could drift (2) Action to mitigate this event is (1) (2)
A. SHUT control reactor power by adjusting the operable Flow Control Valve B. SHUT scram before exceeding Technical Specification Limit for Jet Pump Flow mismatch C. OPEN control reactor power by adjusting the operable Flow Control Valve D. OPEN scram before exceeding Technical Specification Limit for Jet Pump Flow mismatch ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 5003.04 rev 30 NEW 0 Explanation: 90% power implies RR in Fast Speed.
C is correct, with no hydraulic power and RR in Fast, RR FCV may drift open, correct action is to control power with the operable FCV per 5003.04.
A is wrong, OPEN.
B is wrong, OPEN, control reactor power by adjusting the operable Flow Control Valve.
D is wrong, control reactor power by adjusting the operable Flow Control Valve.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 83 RO 203000 K6.02 2.8 3.0 85205 .1.7.2 RHR/LPCI: Injection Mode (Plant Specific) Cognitive Level: HIGH Knowledge ot the ettect that a loss or malfunction D.C. electrical power of the following will have on the RHR/LPCI:
INJECTION MODE:
IUUUL, the reactor is in MUDL 3 with the tollowing conditio Reactor Pressure is 60 psig.
0 BOTH Reactor Recirc Pumps are operating in slow speed.
0 RHR B is operating in the Shutdown Cooling Mode.
0 HPCS and RHR C are unavailable due to maintenance.
RPV Inlet Valves, 1B21-F065A and B are SHUT.
At 1005 Division 1 DC power is lost.
At 1010 Recirc Loop A suction pipe ruptured.
Assuming NO operator action, what is the expected final status of:
(1) RHR Pump A 1E12-CO02A
ý2 PIITMKI Shutoff Valve, IE12-FO42A?
RHR A Pump LPCI from RHR A Shutoff 1E12-CO02A Valve, 1El 2-F042A (1) (2)
A. NOT RUNNING OPEN B. RUNNING SHUT C. NOT RUNNING SHUT D. RUNNING OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP 85201 rev 6 NEW 0 Explanation: with HPCS out of service, LPCI setpoint will be reached.
A is correct, Division 1 DC loss prevents RHR A pump start, initiation logic remains operable from Div 1 NSPS on alternate power, 1E12-F042A will OPEN.
B is wrong, RHR A pump NOT RUNNING, 1E12-F042A will OPEN.
C is wrong, 1E12-F042A will OPEN D is wrong, RHR A pump NOT RUNNING.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 84 RO 204000 K3.04 2.6 2.6 Reactor Water Cleanup System Cognitive Level: HIGH Knowledge of the effect that a loss or malfunction Reactor water temperature of the REACTOR WATER CLEANUP SYSTEM will have on following:
mm ="The reactor operated 6 months at 90% power.
e-'OinRV stuck OPEN esuited in a reactor scram.
- The reactor has been shutdown for 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
..... RPV-Wa-r-L-evel-s6inches on Shutdown Range.
- The condenser is NOT available.
- Shutdown Cooling Mode of RHR is NOT available.
- Alternate Decay Heat Removal is in service with RT Pumps A and B.
- Reactor Temperature is 180'F. Cooldown Rate is 150 F /hour If the Reactor Water Cleanup System is isolated, Reactor Coolant Temperature will A. lower B. s--tabia* at 0oF C. rise to 2127F and stabilize D. rise to 540'F and stabilize ANS: Reference Provided: IReference and Rev: Question Source: Ques Rev C None 4006.01 rev 4 NEW 0 Explanation:
C is correct, when RT is lost, Decay Heat Removal is lost, One SRV stuck OPEN, Coolant Temperature will rise to 212'F and stabilize.
A is wrong, Decay Heat Removal is lost, One SRV stuck OPEN, Coolant Temperature will rise to 212'F and stabilize.
B is wrong, Decay Heat Removal is lost, One SRV stuck OPEN, Coolant Temperature will rise to 212'F and stabilize.
D is wrorg. Decay Heat Removal is lost, One SRV stuck OPEN, Coolant Temperature will rise to 212'F and stabilize.
I
-100 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 85 RO 209002 A2.10 2.7 3.0 85380 .1.6.5 High Pressure Core Spray System (HPCS) Cognitive Level: HIGH Ability to (a) predict the impacts of the following on Valve openings: BWR-5, 6 the HIGH PRESSURE CORE SPRAY SYSTEM (HPCS); and (b) based on those predictions, use procedures to correct, control, or mitigate the consequences of those abnormal conditions or operations:
At 11:00, Drywell Pressure was 1.0 psig.
At 11:00, HPCS Pump automatically started and HPCS Injection Valve 1E22-F004 OPENED.
At 11:05, HPCS Injection Valve 1E22-F004 AUTOMATICALLY SHUT.
At 11:05, HPCS Pump Min Flow to the Suppression Pool 1E22-F012 OPENED.
These events will cause Suppression Pool Level to (1), and if NO operator action is taken, it will be necessary to enter(21).
(1) (2)
(1)
A. RISE EOP-6 PRIMARY CONTAINMENT CONTROL B. RISE EOP-8 SECONDARY CONTAINMENT CONTROL C. LOWER EOP-6 PRIMARY CONTAINMENT CONTROL D. LOWER EOP-8 SECONDARY CONTAINMENT CONTROL ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None LP85380 rev 2 NEW 0 Explanation:
A is correct, The normal HPCS Suction is provided by the RCIC Storage Tank, HPCS Pump Min Flow to the Suppression Pool 1E22-F012 is OPEN, which fills the Suppression Pool. The entry condition for EOP -6 on High Suppression Pool Level is 19 feet 5 inches, HPCS Suction will automatically transfer to the Suppression Pool at 19 feet 11.5 inches.
B is wrong, EOP-6 PRIMARY CONTAINMENT CONTROL is required C is wrong, Suppression Pool Level will RISE.
D is wrong, Suppression Pool Level will RISE, EOP-6 PRIMARY CONTAINMENT CONTROL is required.
7 Z - - . -
NRC SUBMITTAL COPY
_____CPS ILT010_ NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 86 RO 215005 A4.06 3.6 3.8 87411 .1.1.2 Average Power Range Monitor/Local Power Range Cognitive Level: HIGH Monitor System Ability to manually operate and/or monitor in the Verification of proper functioning/
control room: operabilitv PREDICT the expected meter reading if APRM Channel A Meter Function Selector Switch was placed in the COUNT position.
A. 27 B. 28 C. 29 D. 30
-m ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 87411 ILT BANK 06106 0 KJ Explanation:
C is correct, there are 33 assigned LPRMs. COUNT indicates 1 unit per UNBYPASSED LPRM. There are 29 unbypassed LPRMs, COUNT will display 29 A is wrong, will indicate 29 B is wrong, will indicate 29 D is wrong, will indicate 29 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective
-, N -.
87 RO 216000 2.1.27 2.8 2.9 87218 .1.12.2 Nuclear Boiler Instrumentation Cognitive Level: HIGH Conduct of Operations Knowledge of system purpose and/or function.
,kin¸ * .
Due to a sensing line failure, the Differential Pressure across Wide Range Reactor Water I n-tri]ment W?.I -NOTAU( hnz I1NUfR F..1F hve The level signal input to the associated Analog Trip Module will be (1) than ACTUAL level.
This instrument failure (2) PREVENT the HPCS to Containment Outboard Isolation Valve, 1E22-F004 from automatically repositioning when ACTUAL level reaches Level 8.
(1) (2)
A. HIGHER WILL B. HIGHER WILL NOT D. WILLNOT-. - -- -- ------
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 87218 rev 1 NEW 0 Explanation:
Operator must know D/P - Level relationship AND Level 8 logic for 1B21-F004. BOTH N073C AND N073D are required for Level 8 response.
C is correct, High D/P corresponds to a LOWER level input to the ATM. This failureWILL prevent 1E22-F004 from automatically repositioning (SHUT) at Level 8.
A is wrong,. LOWER level input to the ATM.
B is wrong, LOWER level input to the ATM..This failureWILL prevent repositioning.
D is wrong, This failureWILL prevent 1E22-F004 from automatically repositioning.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP #t Objective 88 RO 217000 2.1.12 2.9 4.0 Reactor Core Isolation Cooling System (RCIC) Cognitive Level: HIGH Conduct of Operations Ability to apply technical specifications for a system.
Plant startup and heatup is in progress, pressure is stable at 140 psig.
- Whiletesting t-he 01C tur-bie:
-Cic DIV_1 TURB EXH DIAPH PRESSURE HIGH, 5063-3B alarms.
RUIC DIV 2 TURB EXH DIAPH PRESSURE HIGH, 5063-4B alarms.
This will result in a RCIC Trip (1).
The RCIC System (2) required operable.
(1) (2)
A. AND Isolation IS NOT B. AND Isolation IS C. ONLY IS NOT D. ONLY IS ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None ITS 3.5.3 amend 95 NEW1 0 Explanation: Startup implies Mode 2, RCIC required operable Mode 2 > 150 psig.
A is correct, Group 5 and Group 6 Isolations, RCIC Trips and Isolates, RCIC is not required OPERABLE.
B is wrong, RCIC is not required OPERABLE..
C is wrong, RCIC Trip and Isolation.
D is wrong, RCIC Trip and Isolation, RCIC is not required OPERABLE..
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 89 RO 217000 K5.03 2.6 2.6 85217 .1.5.7 Reactor Core Isolation Cooling System (RCIC) Cognitive Level: HIGH Knowledge of the operational implications of the Differential pressure indication following concepts as they apply to REACTOR CORE ISOLATION COOLING SYSTEM (RCIC):
0 RCIC is running, injecting 600 gpm to the reactor.
- RCIC suction is aligned to the Suppression Pool.
- RCIC DIV 1 STEAM LINE DIFFERENTIAL PRESSURE HIGH, 5063- 3A alarms.
- RCIC DIV 2 STEAM LINE DIFFERENTIAL PRESSURE HIGH, 5063- 4A alarms.
What is the status of(l) RCIC Suppression Pool Suction Valve, 1E51-F031 AND (2) RCIC Pump Discharge to the Reactor Outboard Isolation Valve, 1E51-F013 FIVE MINUTES LATER?
(1) (2)
RCIC Suppression Pool RCIC Pump Discharge to the Reactor Suction Valve, 1E5 1-F031 Outboard Isolation Valve, 1E5 l1-F0 13 SHUT SHUT B. SHUT OPEN C. OPEN SHUT D. OPEN OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 5063.03 rev33 NEW 0 Explanation:
A is correct High Steam Line D/P is a GROUP 5 AND 6 RCIC ISOLATION signal, which SHUTS 1E5 1-F03 1. ALL ISOLATION SIGNALS are RCIC Turbine Trip Signals. RCIC Trip SHUTS 1E5l-F013 B is wrong, RCIC Trip Signal SHUTS 1E51-F013.
C is wrong, High Steam Line D/P is a GROUP 5 AND 6 RCIC ISOLATION signal, which SHUTS 1E51-F031 D is wrong, High Steam Line D/P is a GROUP 5 AND 6 RCIC ISOLATION signal, which SHUTS 1E51l-F031. ALL ISOLATION SIGNALS are RCIC Turbine Trip Signals. RCIC Trip SHUTS 1E51-F013 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 90 RO 223002 2.4.31 3.3 3.4 Primary Containment Isolation System/Nuclear Cognitive Level: HIGH Steam Supply Shut-Off Emergency Procedures and Plan Knowledge of annunciators alarms and indications, and use of the response
______________ C _____________________________________________ I instructions.
With the reactor at 90% power, the following annunciators alarm:
"* AUX BLDG MAIN STEAM TUNNEL HIGH TEMP, 5066-1D
"* AUX BLDG MAIN STEAM TUNNEL HIGH TEMP, 5067-ID
"* RCIC STEAM TUNNEL TIMER BYPASS, 5063-5A Assuming NO operator actions, PREDICT the status of (1) Main Steam Line A Outboard MSIV, 1B21-F028A AND (2) RHR and RCIC Steam Supply Inboard Isolation Valve, 1E51-F063 after FIVE MINUTES?
S(1) (2)
Main Steam Line A RHR and RCIC Steam Supply Outboard MSIV, Inboard Isolation Valve, 1B2i-F028A IE51-F063 A. SHUT OPEN B. SHUT SHUT C. OPEN SHUT D. OPEN OPEN ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 4100.01 NEW 0 Explanation:
A is correct, MS Tunnel High Temp causes Group 1 Isolation and Initiation of a 25 minute delay timer for RCIC Isolation.
B is wrong, RCIC Isolation delayed for 25 minutes.
C is wrong, MSIVs are shut, RCIC Isolation delayed for 25 minutes.
D is wrong, MSIVs are shut.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 91 RO 245000 K3.02 3.9 4.0 87498 .1.10 Main Turbine Generator and Auxiliary Systems Cognitive Level: HIGH Knowledge of the effect that a loss or malfunction Reactor pressure of the MAIN TURBINE GENERATOR AND AUXILIARY SYSTEMS will have on following:
. . Tfi-ereactor was a" 6-we-r frsix mon-ths.
- The Turbine Generator tripped due to a fault in Main Power Transformer A.
Assuming ALL systems operate as expected, PREDICT HOW MANY of the following valves OPEN as an INITIAL response to control Reactor pressure?
MAIN TURBINE SAFETY RELIEF BYPASS VALVES VALVES A. ONLY 3 NONE B. ONLY 3 ONLY 3 -l- - -- 6460C ALL6 ALY 16 D) ATl.T.6 6 ALL 16 D ALL ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None LP 87498 rev 3 NEW 0 Explanation:
D is correct, Transient Analysis shows ALL 6 BPVs AND ALL 16 SRVs OPEN initially.
A is wrong, 6 BPVs AND all 16 SRVs OPEN initially.
B is wrong, 6 BPVs AND all 16 SRVs OPEN initially.
C is wrong, 16 SRVs OPEN initially.
-.-.-- 41$A.&**r%.,a$,-4*4tt,.4$ -. - 4. <-,- - -. -
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 92 RO 256000 K4.04 2.7 2.7 85302 .1.1.2 Reactor Condensate System Cognitive Level: RECALL Knowledge of REACTOR CONDENSATE Maintenance of water quality SYSTEM design feature(s) and/or interlocks which provide for the following:
.The Condensate Polishing System __
A. filters and purifies water to maintain Reactor feedwater quality B. polishes and deionizes high quality water rejected to Radwaste C. filters and purifies water to maintain quality in the Auxiliary Boilers D. polishes and deionizes high quality water rejected to the Ultrasonic Resin Cleaner ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 85302 rev 2 ILT Bank 10439 0 Explanation:
A is correct, The Condensate Polishing System, filters and purifies water to maintain Reactor feedwater quality.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 93 RO GENERIC 2.2.13 3.6 3.8 Cognitive Level:RECALL Equipment Control Knowledge of tagging and clearance procedures.
-While verifying control switch tags in the Main Control Room, it is discovered that a tag has 0 een placed on the wrong valv conit-ro 'witch.
Which one of the following actions is required FIRST?
A. Stop and notify the Tagging Authority.
B. Move the tag to the correct component.
C. Evaluate the impact on the affected system.
D. Generate a Condition Report.
.1 - - - - - -
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 1014.01 rev 29b NEW 0 Explanation:
A is correct, Stop and notify the Tagging Authority.
Distractors are also performed, but are not FIRST.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 94 RO GENERIC 2.2.30 3.5 3.3 Cognitive Level: RECALL Equipment Control Knowledge of RO duties in the control room during fuel handling such as alarms from fuel handling area /
communication with fuel storage facility / systems operated from the control room in support of fueling operations / and supporting instrumentation.
Which one of the following is a responsibility of the Reactor Operator during core alterations?
A. Maintain the official copy of the Special Nuclear Material Move Sheets.
B. Observe Source Range Monitors for rising counts.
C. Perform verification of in-core coordinates.
D. Observe and directly supervise Core Alterations.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3703.01 rev 22b Modified INPO 0 19164 Braidwood Explanation:
B is correct, stated in reference A is wrong, SNM Custodian / Nuclear Engineer C is wrong, Bridge Operator, Spotter, Refuel SRO D is wrong, Refuel SRO NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 95 RO GENERIC 2.3.9 2.5 3.4 85455 .1.9 Cognitive Level: RECALL Radiological Controls Knowledge of the process for performing a containment purge.
During a Containment Purge, ventilation is aligned to supply M(1air to the Containment AND (2) exhaust air is discharged to the environment (1) (2)
A. charcoal filtered charcoal filtered B. charcoal filtered unfiltered C. fresh unfiltered D. fresh charcoal filtered ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D INone 85455 rev 2 NEW 0 Explanation:
D is correct, fresh air is supplied, charcoal filtered exhaust is discharged.
A is wrong, fresh air is supplied.
B is wrong, fresh air is supplied, charcoal filtered exhaust is discharged.
C is wrong,charcoal filtered exhaust is discharged.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 96 RO 295002 AA2.04 2.8 2.9 85271 .1.5.1 Loss of Main Condenser Vacuum Cognitive Level: HIGH Ability to determine and/or interpret the following Offgas system flow as they apply to LOSS OF MAIN CONDENSER VACUUM:
......The Reactor is at 90%/power.
Off-Gas Post Treatment PRMs eRIX-PRO3 5 AND 1RIX-PRO41 are in HIGH ALARM.
Main Condenser Vacuum is expected to _(!)due to (2)
(1) (2)
A. IMPROVE a reduction in Off Gas System flow B. IMPROVE air leaking into the Main Condenser C. DEGRADE a reduction in Off Gas System flow D. DEGRADE air leaking into the Main Condenser ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 85271 rev 4 NEW 0 Explanation: Reactor at 90% power implies SJAEs and Off Gas are in service, HIGH ALARM on either PRM listed will SHUT 1N66-F060, which isolates Off Gas Flow to the Stack AND is expected to DEGRADE Main Condenser Vacuum.
A is wrong, Main Condenser Vacuum is expected to DEGRADE.
B is wrong, Main Condenser Vacuum is expected to DEGRADE, due to a reduction in Off Gas Flow.
D is wrong, due to a reduction in Off Gas Flow.
N --------
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 97 RO 295003 AA2.02 4.2 4.3 Partial or Complete Loss of A.C. Power Cognitive Level: HIGH Mpg" Ability to determine and/or interpret the following Reactor power, pressure, and level as they apply to PARTIAL OR COMPLETE LOSS OF A.C. POWER:
Following a reactor scram from 90% power due to a Station Blackout, Source Range Monitors
--. will indicate accurate (1), AND their detector drive power is (2).
(1) (2)
A. Level AND Period maintained by an inverter B. Level AND Period lost C. Period ONLY maintained by an inverter D. Period ONLY lost DANS: Reference Provided: Reference and Rev: QuestionSouce:
oQues Rev D None -14200.01 rev 15 NEW 0 Explanation: SRMs are normally retracted at power. SRM Drive Power is from CB MCC 1C and AB MCC iF, BOTH are lost during a SBO. SRM Detectors are retracted and cannot be inserted during the SBO.
D is correct, SRMs will indicate accurate Period ONLY, their drives are retracted and are lost during a SBO.
A is wrong, Period ONLY, their drives are retracted and are lost during a SBO.
B is wrong, Period ONLY.
C is wrong, drives are retracted and are lost during an SBO.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective W-'-ý 98 RO 295014 AA2.01 4.1 4.2 Inadvertent Reactivity Addition Cognitive Level: HIGH Ability to determine and/or interpret the following Reactor power as they apply to INADVERTENT REACTIVITY ADDITION:
Reac6 -___Y~power.
r Due to a failure High Pressure Heater 6A and 6B Bypass Valve, 1FW014 is stroking OPEN.
INITIALLY, Reactor Power indication on APRMs will (1)f, due to increasing Core (2).
(1) (2)
A. RISE Inlet Subcooling B. RISE Flow C. LOWER Inlet Subcooling D. LOWER Flow ANS: Reference Provided: Reference and Rev: Question Source:
A None 4005.01 rev 16 NEW Ques Rev Explanation:
A is correct, APRMs will RISE due to increasing Core Inlet Subcooling.
B is wrong, due to increasing Core Inlet Subcooling.
C is wrong, APRMs will RISE.
D is wrong, APRMs will RISE due to increasing Core Inlet Subcooling.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 99 RO 295028 2.4.1 4.3 4.6 High Drywell Temperature Cognitive Level: RECALL Emergency Procedures and Plan Knowledge of EOP entry conditions and immediate action steps.
Which one of the following is the MINIMUM Drywell Temperature which requires entry into EOP-6, PRIMARY CONTAINMENT CONTROL?
A. 146 0 F B. 151°F C. 156 0F D. 161°F ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None EOP Bases 8-2 rev 3 NEW 0 Explanation:
B is correct, it is required to enter EOP-6 PRIMARY CONTAINMENT CONTROL above 150 0 F.
K>
A is wrong, NOT above150°F C is wrong, NOT the MINIMUM.
D is wrong, NOT the MINIMUM.
N -
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 100 RO 400000 K1.03 2.7 3.0- 85208 .1.2.6 Component Cooling Water System (CCWS) Cognitive Level: RECALL Knowledge of the physical connections and/or Radiation monitoring systems cause-effect relationships between CCWS and the following:
The Process Radiation Monitor which samples the Component Cooling Water System is physically connected to the system at the A. outlet piping of the CCW Heat Exchangers B. discharge piping of the CCW Pumps C. return piping to the CCW Pumps D. the inlet piping to the CCW Demin ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None 85208 rev 4 NEW 0 Explanation:
C is correct, CCW Return Header PRM, 1RIX-PR037 is physically connected to the system at the return piping to the CCW Pumps.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 101 SRO 209001 2.1.33 3.4 4.0 Low Pressure Core Spray System Cognitive Level:HIGH Conduct of Operations Ability to recognize indications for system operating parameters which are entry-level conditions for technical specifications.
Low Pressure Core Spray Pump Min Flow Recirc Valve, 1E21 -FO 11 failed to stroke OPEN
- during Low Pressure Core Spray Valve Operability, 9052.02.
As a result, Low Pressure Core Spray is (1).
LPCS helps to ensure cladding temperature is limited to (2) in the event of a DBA LOCA.
(1) (2)
A. OPERABLE 3300°F B._OPERABLE 2200°F C. INOPERABLE 3300°F D. INOPERABLE 2200°F ANS: Reference Provided: Reference and Rev: . Question Source: Ques Rev D None ITS B.3.5.1 NEW 0 Explanation:
D is correct, LPCS is INOPERABLE, LPCS limits fuel cladding temperature to 2200TF.
A is wrong, LPCS is INOPERABLE, LPCS limits fuel cladding temperature to 2200'F.
B is wrong, LPCS is INOPERABLE.
C is wrong, LPCS limits fuel cladding temperature to 2200°F NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 102 SRO 223002 2.1.11 3.0 3.8 K#
Primary Containment Isolation System/Nuclear Cognitive Level: HIGH Steam Supply Shut-Off Conduct of Operations Knowledge of less than one hour technical specification action statements for systems. I The reactor is operating at 90% power.
~B-OTHI *fMa in.Steam Drain and MSIV Bypass Inboard Isolation ValVe, IB21 -F 16 AND:
Main Steam Drain and MSIV Bypass Outboard Isolation Valve, 1B21-F019 are inoperable due to slow stroke time.
The required action is to isolate the penetration flow pathjl).
The basis for this requirement is to limit (2).
(1) (2)
A. within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> fission product release to the environment B. within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> inventory loss from the reactor C. within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> inventory loss from the reactor D. within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> fission product release to the environment ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None ITS B3.6.1.3B NEW 0 Explanation:
A is correct, ITS 3.6.1.3B requires the flowpath isolated within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />, the basis is to limit fission product release to the environment.
B is wrong, requires the flowpath isolated within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />, the basis is to limit fission product release to the environment.
C is wrong, the basis is to limit fission product release to the environment.
D is wrong, requires the flowpath isolated within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.
I R 1111 1 1 - I ý. - __ - . I II I NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 103 SRO 239003 2.4.10 3.0 3.1 MSIV Leakage Control System Cognitive Level: RECALL Emergency Procedures and Plan Knowledge of annunciator response
___ ___ ______ ____ ___ ___ ___ ___ ___ procedures.
A LOCA has occurred.
Main Ste am Isolation Valve Leakage Control System has been initiated.
LOW DILUTION AIR FLOW, 5067-5J alarms.
The cause of the annunciator is Mj steam leakage past the MSI Vs.
It is required to isolate the (2) Main Steam Isolation Valve Leakage Control System.
(1) (2)
A. LOW Outboard B. LOW Inboard C. HIGH Outboard
=D. HIGH __Inboard ANS: Reference Provided:7 Reference and Rev: Question Source: Ques Rev C None 5067-5J rev 31 NEW 0 Explanation:
C is correct. HIGH steam leakage past the MSIVs causes Low Dilution Flow, it is required to isolate the Outboard MSIV-LCS.
A is wrong, HIGH steam leakage past the MSIVs causes Low Dilution Flow.
B is wrong, HIGH steam leakage past the MSIVs causes Low Dilution Flow, it is required to isolate the Outboard MSIV-LCS.
D is wrong, it is required to isolate the Outboard MSIV-LCS.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective t' 104 SRO 264000 2.2.22 3.4 4.1 Emergency Generators (Diesel/Jet) Cognitive Level: HIGH Equipment Control Knowledge of limiting conditions for operations and safety limits.
_The
- plant is at 90% power.
- lA Diesel Generator is tagged out for turbocharger repair.
- HIGH/LOW TEMPERATURE DIESEL GENERATOR ROOM 1B, 5052-4A alarms.
- Diesel Generator Room 1B Temperature is 48°F and LOWERING.
Determine the proper action AND the basis for the requirement.
The required action is (1) within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />.
The basis for the requirement is to provide adequate power to (2).
(1) (2)
A. start and load DG 1C ECCS pumps in the event of a LOOP LOCA B. start and load DG IC perform a controlled plant shutdown w- .. C. make 1A or 1B DG operable ECCS pumps in the event of a LOOP LOCA D. make IA or 1B DG operable perform a controlled plant shutdown ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C ITS 3.8.1 ITS 3.8.1.E Modified LC060 0 Explanation:
C is correct, it is required to make lA or 11B DG operable to provide power to ECCS pumps.
A is wrong, it is required to make 1A or 1B DG operable.
B is wrong, it is required to make 1A or 1B DG operable to provide power to ECCS pumps.
D is wrong, to provide power to ECCS pumps.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 105 SRO 272000 2.1.33 3.4 4.0 Radiation Monitoring System Cognitive Level: HIGH Conduct of Operations Ability to recognize indications for system operating parameters which are entry-level conditions for technical specifications.
The plant is at 90% power.
Division 1 Shutdown Service Water Effluent Process Radiation Monitor 1RIX-PR038 is in LOW FAIL.
It is required to (1) to prevent an unmonitored radioactive release to the (2).
(1) (2)
A. secure flow through the Plant Service Water System Ultimate Heat Sink B. analyze grab samples every 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Ultimate Heat Sink C. secure flow through the Plant Service Water System Discharge Flume D. analyze grab samples every 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> Discharge Flume ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None ODCM 2.7-1 NEW 0 Explanation:
B is correct, It is required to analyze grab samples every 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> to prevent a radioactive release to the Ultimate Heat Sink.
A is wrong, It is required to analyze grab samples every 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br />.
C is wrong, It is required to analyze grab samples every 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> to prevent a radioactive release to the Ultimate Heat Sink.
D is wrong, to prevent a radioactive release to the Ultimate Heat Sink.
N NRC SUBMITTAL COPY
CPS ILTOIOI NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 106 SRO 290002 2.2.22 3.4 4.1 87439 rev 2 1.1.3 Reactor Vessel Internals Cognitive Level: HIGH Equipment Control Knowledge of limiting conditions for operations and safety limits.
The plant is in MODE 2 R 600 psig
- Reactor Power is 28%
It is required to (1) because of (2) concerns.
(1) (2)
A. Be in MODE 3 within 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> reactor coolant system B. Be in MODE 3 within 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br /> fuel cladding C. Notify the NRC within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> reactor coolant system D. Notify the NRC within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> fuel cladding A~~~rfl~.. = . .. .- ....
AIN,b: Reference Provided: Keterence and Rev: Question Source: Ques Rev D None ITS 2.1.1.1 NEW 0 Explanation: 0 D is correct, MCPR safety limit is violated, Notify the NRC , this limit protects the cladding..
A is wrong, Notify the NRC within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.
B is wrong, Notify the NRC within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />, this limit protects the cladding.
C is wrong, this limit protects the cladding 0 W a 00-- ps I NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 107 SRO GENERIC 2.1.20 4.3 4.2 7--- -----
Cognitive Level: RECALL Conduct of Operations Ability to execute procedure steps.
Which one of the following is the required action per Core Alterations, 3703.01, when a fuel bundle has been placed in an incorrect core location and released?
A. Move the bundle from the incorrect location to the correct location B. Note the actual location on the SNM move sheet and continue.
C. Move the bundle from the incorrect location to the original location.
D. Initiate a Condition Report and contact a Reactor Engineer.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 3703.01 rev 23 NEW 0 Explanation:
D is correct, Initiate a Condition Report and contact a Reactor Engineer.
w* -..
I NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 108 SRO GENERIC 2.1.33 3.4 4.0 Cognitive Level: HIGH Conduct of Operations Ability to recognize indications for system operating parameters which are entry-level conditions for technical specifications.
0 Reactor Power is 90%.
S Total Core Flow is 84.5 Mlb/hr.
0 Loop A Jet Pump Flow is 39.5 Mlb/hr.
0 Loop B Jet Pump Flow is 45.0 Mlb/hr.
This combination (1) Technical Specification LCO requirements.
The basis of the applicable Technical Specification LCO is to ensure that (2) preserved.
(1) (2)
A. MEETS the ability to reflood the core is B. MEETS loop coastdown characteristics are DOES NOT MEET the ability to reflood the core is D. DOES NOT MEET loop coastdown characteristics are ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D Calculator ITS 3.4.1 .A NEW 0 Explanation: allowable mismatch > 70% core flow is 5% rated core flow(4.225 Mlb/hr).
D is correct, DOES NOT MEET Tech Spec requirements, LCO ensures loop coastdown characteristics are preserved.
A is wrong, DOES NOT MEET Tech Spec requirements, LCO ensures loop coastdown characteristics are preserved.
B is wrong, DOES NOT MEET Tech Spec requirements.
C is wrong, LCO ensures loop coastdown characteristics are preserved.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 109 SRO GENERIC 2.2.25 2.5 3.7 Cognitive Level: RECALL Equipment Control Knowledge of bases in technical specifications for limiting conditions for operations and safety limits.
The Reactor Coolant System Pressure Safety Limit is (1) psig as measured in the steam dome and is based on (2) of design pressure.
(1) (2)
A. 1375 110%
B. 1375 125%
C. 1325 110%
D. 1325 125%
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev CNone ITSB12.1.2 revO0 NEW 0 Explanation:
C is correct, 1325 psig, as measured in the steam dome corresponds to 1375 psig at the lowest elevation of the RCS, which corresponds to 110 % of design pressure (1250 psig).
NRC SUBMITTAL COPY H
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 110 SRO GENERIC 2.2.26 2.5 3.7 K>
Cognitive Level: HIGH Equipment Control Knowledge of refueling administrative I I requirements.
Refueling is in progress.
The Refueling Bridge is moving towards the core with a new fuel assembly.
The A Reactor Operator reports that SRMs indicate as follows:
SRM A B C D CPS 2x10° 4x10 0 6xlO° 5x10° Which of the following is the correct action and why?
A. Complete the fuel move if ALL OTHER SRMs indicate normally because any TWO SRMs are the minimum required for Core Alterations.
B. Stop Core Alterations ONLY in the affected quadrant because ONE SRM is required in the quadrant receiving Core Alterations.
C. Stop ALL Core Alterations because ALL SRMs are required for Core Alterations.
D. Complete the fuel move irrespective of SRM status, because the fuel must be placed in a safe condition.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None 3703.01 rev 22b New 0 Explanation:
B is correct. One SRM INOP implies 3 are available. Only one quadrant cannot receive Core Alts. The other three quadrants have an operable SRM plus an adjacent SRM.
A is wrong, completion is not allowed if the quadrant has inoperable SRM.
C is wrong, not required to stop Core Alts, all SRMs not required.
D is wrong, completion is only allowed if SRM operability is met.
NRC SUBMITTAL COPY
CPS ILT0101 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 111 SRO GENERIC 2.3.1 2.6 3.0 Cognitive Level: HIGH Radiological Controls Knowledge of 10 CFR 20 and related facility radiation control requirements.
During a refueling outage, with LPRM detector replacement in progress; an LPRM detector is discovered in a trash barrel in the Auxiliary Building by a contractor.
RP determined that the contractor received:
0 4 Rem Whole Body 0 16 Rem to the eyes
- 25 Rem shallow dose to his right hand What is (are) the required notification(s)?
- 1. A report specifying the exposure issued to the contractor.
- 2. Notify the NRC Operations Center via the ENS immediately, but no later than 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />.
- 3. Notify the NRC Operations Center within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
- 4. Submit a written report to the NRC within 30 days.
A. 1 ONLY B.1,2and4 ONLYU C. I and 4 ONLY D. 1, 3 and 4 ONLY ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D LS-AA-1120 rev 0 LS-AA-1120 rev 0 NEW 0 pages 17-21 Explanation:
C is correct, It is required to Notify the NRC within 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />, submit a written report to the LJitiLL4LctOrarid te 1TNI-k wlmln 3U days.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question w Q# Exam System # KA # RO SRO LP # Objective 112 SRO GENERIC 2.3.8 2.3 3.2 Cognitive Level: RECALL Radiological Controls Knowledge of the process for performing a planned gaseous radioactive release.
Containment Venting is required per EOP-6, Primary Containment Control.
Permission to exceed release rate limits is required from the A. Control Room Supervisor B. Radiation Protection Manager C. Emergency Director D. Plant Manager ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C Blackout EOP-6 4411.06 rev 4 JNEW 7 0 Explanation:
C is correct, the Emergency Director must authorize exceeding release rates in EOP-6.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 113 SRO GENERIC 2.4.4 4.0 4.3 87296 .1.1 Cognitive Level: HIGH Emergency Procedures and Plan Ability to recognize abnormal indications for system operating parameters which are entry-level conditions for emergency and abnormal operating procedures.
The plant is operating at 90% power.
"* Fuel movement activities are being conducted in the Spent Fuel Pool.
"* A fuel assembly is inadvertently dropped while being moved.
"* Bubbles are seen by the operators on the Fuel Handling Bridge.
The water in the pool REDUCES the M1) radiation hazard and the required action is to enter (1) (2)
A. Iodine 4979.07 DROPPED FUEL BUNDLE B. Noble Gas EOP-9 RADIOACTIVITY RELEASE CONTROL C. Iodine EOP-9 RADIOACTIVITY RELEASE CONTROL D. Noble Gas 4979.07 DROPPED FUEL BUNDLE ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 4979.07 rev 0 NEW 0 Explanation:
A is correct, Iodine is absorbed by the pool, which reduces the hazard. Noble Gas absorption is negligible, 4979.07 is the correct procedure.
B is wrong, Noble Gas absorption is negligible, no ALERT EAL, not outside secondary containment.
C is wrong, no ALERT EAL, not outside secondary containment.
D is wrong, Noble Gas absorption is negligible.
NRC SUBMITTAL COPY
CPS ILTI010 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 114 SRO 295004 2.4.11 3.4 3.6 Partial or Complete Loss of D.C. Power Cognitive Level: RECALL Emergency Procedures and Plan Knowledge of abnormal condition procedures.
S The reactor is at 90% power All Circulating Water Pumps are in service.
0 All Auxiliary Power Buses are supplied by their MAIN source.
0 TRIP 125V DC MCC 1E BREAKER, 5012-6A alarms S UNDERVOLTAGE 125V DCMCC 1E alarms 0 DC MCC IE BUS VOLTAGE is 0 VDC It is required to immediately enter (1).
Execution of these procedure steps will require entry into (2).
(1) (2)
A. Loss of AC Power, 4200.01 Reactor Scram, 4100.01 B. Loss of AC Power, 4200.01 Rapid Plant Shutdown, 3005.01 C. Loss of DC Power, 4201.01 Rapid Plant Shutdown, 3005.01 D. Loss of DC Power, 4201.01 Reactor Scram, 4100.01 ANS: Reference Provided: ][Reference and Rev: Question Source: Ques Rev D None 4201.01 rev 4a NEW 0 Explanation:
D is correct, Loss of DC power, 4201.01, Reactor Scram, 4100.01.
A is wrong, Loss of DC power, 4201.01.
B is wrong, Loss of DC power, 4201.01, Reactor Scram, 4100.01.
C is wrong, Reactor Scram, 4100.01 I
N NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 115 SRO*l 295004 AA2.02 3.5 3.9 Partial or Complete Loss of D.C. Power Cognitive Level: HIGH Ability to determine and/or interpret the following Extent of partial or complete loss of as they apply to PARTIAL OR COMPLETE LOSS D.C. power OF D.C. POWER:
The reactor is at 90% power.
TRIP 125V DCUMMCC*BABR, 5060-lEalrims.
Diesel Generator IA Output Breaker GREEN light is LIT.
C Area Operator reports 125V DC MCC IA Battery Feed Breaker is TRIPPED and will not reset.
It is required to (1).
If a Loss of Offsite Power occurs while in this condition, Diesel Generator 1A (2) start.
(1) (2)
A. restore the battery to operable within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> WILL NOT B. restore the battery to operable within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br /> WILL C. verify the charger is operable within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> WILL NOT D. verify the charger is operable within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> WILL ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A ITS 3.8.4 no bases ITS B.3.8.4 rev 6-5 NEW 0 Explanation: The impact on the Emergency Diesel Generator is listed in Bases of 3.8.4.
A is correct, restore the battery within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />, EDG WILL NOT start.
B is wrong, EDG WILL NOT start..
C is wrong, restore the battery within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />..
D is wrong, restore the battery within 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />, EDG WILL NOT start.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective r 116 SRO 295012 AA2.01 3.8 3.9 High Drywell Temperature Cognitive Level: HIGH Ability to determine and/or interpret the following Drywell temperature as they apply to HIGH DRYWELL TEMPERATURE:
You are the CRS.
The B Reactor Operator informs you that Drywell Average Air Temperature is 150'F.
This (1) exceed the Technical Specification Limit, which is based on NOT exceeding (2) during a DBA LOCA.
(1) (2)
A. DOES NOT 330°F in the drywell B. DOES 185°F in the containment C. DOES NOT 185°F in the containment D. DOES 330'F in the drywell ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None ITS B3.6.5.5 NEW 0 Explanation:
D is correct, Drywell Average Air Temperature at 150'F exceeds the LCO value of 146.53'F and is based on not exceeding 330'F during a DBA LOCA.
A is wrong, exceeds the LCO value.
B is wrong, based on not exceeding 330'F during a DBA LOCA.
C is wrong, exceeds the LCO value based on not exceeding 330'F during a DBA LOCA.
. . . .I . -- - --- F-,~-.-. . T NRC SUBMITTAL COPY 111-
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 7
117 SRO 295015 AA2.01 4.1 4.3 Incomplete SCRAM Cognitive Level: HIGH Ability to determine and/or interpret the following Reactor power as they apply to INCOMPLETE SCRAM: I
- -The plant is at 35% power with five Safety Relief Valves OPEN.
- Reactor Water Level is +30 inches.
- Suppression Pool Temperature is 117F.
- Drywell Pressure is 1.9 psig.
It is required to Terminate and Prevent Injection and lower level until which one of the following conditions is met?
A. ONLY one Safety Relief Valve is OPEN.
B. RPV Level drops to - 60 inches.
C. Drywell Pressure stays below 1.68 psig.
D. Reactor Power lowers to 4%.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 4404.01 rev 26 NEW 0 Explanation:
D is correct, It is required to lower level until power is below 5%.
A is wrong, All SRVs CLOSED AND Drywell Pressure is < 1.68 psig.
B is wrong, -140 inches C is wrong, All SRVs CLOSED AND Drywell Pressure is < 1.68 psig.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective V
118 SRO 295017 2.4.10 3.0 3.1 High Off-Site Release Rate Cognitive Level: HIGH Emergency Procedures and Plan Knowledge of annunciator response procedures.
"* A Radwaste Liquid Discharge is in progress.
"* Liquid Radwaste Discharge, ORIX-PRO40, is in HIGH ALARM.
"* Data review indicates the alarm is NOT due to a spike.
The required action is to (1) AND enter (2).
(1) (2)
A. verify liquid discharge has been secured Abnormal Release of Radioactive Liquids, 4979.05 B. verify liquid discharge has been secured EOP-9, Radioactivity Release Control C. direct chemistry to obtain a sample Abnormal Release of Radioactive Liquids, 4979.05
-D. direct chemistry to obtain a sample EOP-9, Radioactivity Release Control ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 5140.54 rev 0 NEW 0 Explanation:
A is correct, verify liquid discharge has been secured, enter Abnormal Release of Radioactive Liquids, 4979.05.
B is wrong, enter Abnormal Release of Radioactive Liquids, 4979.05.
C is wrong, verify liquid discharge has been secured.
D is wrong, verify liquid discharge has been secured, enter Abnormal Release of Radioactive Liquids, 4979.05.
=
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 119 SRO 295017 AA2.01 2.9 4.2 High Off-Site Release Rate Cognitive Level: HIGH Ability to determine and/or interpret the following Off-site release rate: Plant-Specific as they apply to HIGH OFF-SITE RELEASE RATE:
A Radwaste Truck wrecked on the site access road at the Highway 54 intersection.
The liner has failed resulting in leakage.
The Radiation Protection Technician dispatched to the area reports that dose rate at the site boundary has been 15 mr/hr for the last 30 minutes.
It is required to declare an (1) due to an (2).
(1) (2)
A. UNUSUAL EVENT offsite release B. UNUSUAL EVENT unplanned increase in radiation levels C. ALERT offsite release D. ALERT unplanned increase in radiation levels ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C Radiological RA-2 NEW 0 Emergency Plan Annex for CPS CL-3 through 16 Explanation: 10 CFR 55.43(b)4 Radiation Hazards during abnormal situations.
C is correct, an ALERT is declared due to an offsite release.
A is wrong, an ALERT is declared.
B is wrong, an ALERT is declared due to an offsite release.
D is wrong, due to an offsite release.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 120 SRO 295019 AA2.01 3.5 3.6 Partial or Complete Loss of Instrument Air Cognitive Level: HIGH Ability to determine and/or interpret the following Instrument air system pressure as they apply to PARTIAL OR COMPLETE LOSS OF INSTRUMENT AIR:
Reactor power is 90%.
AUTO START SERVICE AIR COMPRESSOR, 5041-6B alarms.
At this time, Service Air System Pressure is expected to be (1).
If air pressure were to decrease an additional 10 psig, the Reactor Operator should be directed to perform actions in accordance with (2).
(1) (2)
A. 65 and 75 psig Reactor Scram, 4100.01 B. 65 and 75 psig Loss of Instrument Air, 4004.01 C. 76 and 85 psig Reactor Scram, 4100.01 D. 76 and 85 psig Loss of Instrument Air, 4004.01 ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 4004.01 rev 8 NEW 0 Explanation: Air Compressor Auto Starts at 80 psig. Scram is required at 60 psig.
D is correct, 76 and 85 psig, enter Loss of Instrument Air, 4004.01.
A is wrong, 76 and 85 psig, enter Loss of Instrument Air, 4004.01.
B is wrong, 76 and 85 psig.
C is wrong, enter Loss of Instrument Air, 4004.01.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 121 SRO 295022 2.4.10 3.0 3.1 Loss of CRD Pumps Cognitive Level: HIGH Emergency Procedures and Plan Knowledge of annunciator response procedures.
- A reactor startup is in progress.
0 Reactor pressure is 0 psig.
0 CRD DRIVE WATER PUMP AUTO TRIP, 5068.03 alarms.
0 Accumulator Fault annunciator is received for CRD 32-21.
0 C Area Operator reports Accumulator 32-21 is 1500 psig.
S CRD 32-21 is at notch position 48.
It is required to IMMEDIATELY (1) because there is inadequate pressure available to ensure rod 32-21's scram (2) .
(1) (2)
A. Declare control rod time 32-21 inoperable B. Declare control rod function 32-21 inoperable C. Place the reactor mode switch time in the shutdown position D. Place the reactor mode switch function in the shutdown position ANS: Reference Provided: R eference and Rev: Question Source: Ques Rev D INone ITS 3.1.5D.lI Modified LC432 0 Explanation:
D is correct, ITS 3.1.5.C. 1 requires immediate verification that all rods associated with inoperable accumulators are inserted. Since rod 32-21 is at notch 48 this time cannot be met.
3.1.5.D. 1 requires the reactor mode switch placed in shutdown immediately.
A is wrong, required to place the mode switch in shutdown, to ensure scram function.
B is wrong, required to place the mode switch in shutdown., Declaring rod 32-21 is a 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> action - not IMMEDIATE.
C is wrong, to ensure scram function.
..I .. IN
. .. 11. N_
. -_ . . . . .. . . . . .. . . . . . . . L -: J . : . - Z: .: L J J . . _ J J - _ :l I NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 122 SRO 295027 2.4.11 3.4 3.6 High Containment Temperature (Mark III Cognitive Level: HIGH Containment Only)
Emergency Procedures and Plan Knowledge of abnormal condition procedures.
At 1330, RT Pumps A and B are in service.
At 1340, RWCU HX ROOM WEST TEMPERATURE HIGH, 5000-5A alarms.
At 1345, assuming no operator action, RT pumps A and B are (1).
Operator actions should be directed in accordance with (2).
(1) (2)
A. NOT RUNNING Automatic Isolation, 4001.02 B. NOT RUNNING EOP-6, Primary Containment Control C. RUNNING Automatic Isolation, 4001.02 D. RUNNING EOP-6, Primary Containment Control ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev A None 5000.05 rev 27 NEW 0 Explanation: RT will isolate, RT pumps will trip..
A is correct, NOT RUNNING, Automatic Isolation, 4001.02.
B is wrong, Automatic Isolation, 4001.02.
C is wrong, NOT RUNNING.
D is wrong, NOT RUNNING, Automatic Isolation, 4001.02 NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 123 SRO 295030 2.4.1 4.3 4.6 Low Suppression Pool Water Level Cognitive Level: HIGH Emergency Procedures and Plan Knowledge of EOP entry conditions and immediate action steps.
_-Following a reactor scram from 90% power, conditions are as follows.
"* Five rods are at notch 48.
"* Suppression Pool Level is 18 feet.
"* Suppression Pool Temperature is 140°F.
"* Reactor Pressure is 1000 psig controlled with Bypass Valves.
"* Reactor Water Level is +30 inches.
"* Reactor Power is < 1 %
"* Standby Liquid Control Pump A is injecting.
"* Standby Liquid Control Pump B is tripped.
What action should operators be directed to perform?
A. Reduce Reactor Water Level to at least -60 inches.
B. Initiate Alternate Boron Injection.
C. Reduce Reactor Pressure to less than 950 psig.
D. Initiate Automatic Depressurization System.
ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev C None EOP-6 NEW 0 Explanation: Suppression Pool Level at 18 feet requires EOP-6 entry.
C is correct, Heat Capacity Limit requires lowering Reactor Pressure below 960 psig.
A is wrong, not required to lower level because power is <5%.
B is wrong, Boron Injection Temperature Limit is exceeded but SBLC is injecting.
D is wrong, is not required because reactor pressure has not been lowered yet.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 124 SRO 295033 2.4.10 3.0 3.1 High Secondary Containment Area Radiation Levels Cognitive Level: HIGH Emergency Procedures and Plan Knowledge of annunciator response procedures.
S New Fuel inspection is in progress in the Fuel Building.
0 Spent Fuel Storage Area Radiation Monitor, 1RIX-AR016 is in HIGH ALARM.
0 Data review of 1RIX-AR016 indicates 3 mr/hr, RISING slowly.
It is required to enter Abnormal High Area Radiation, 4979.02 (1), and (2).
(1) (2)
A. ONLY verify VG auto starts B. ONLY evacuate the area C. AND EOP-8, Secondary Containment Control verify VG auto starts D. AND EOP-8, Secondary Containment Control evacuate the area V - ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev D None 5040.08 7NEW 7 0 Explanation:
D is correct, it is required to enter BOTH 4979.02 AND EOP-8, it is required to evacuate the area.
A is wrong, enter BOTH 4979.02 AND EOP-8, it is required to evacuate the area.
B is wrong, enter BOTH 4979.02 AND EOP-8.
C is wrong, it is required to evacuate the area.
NRC SUBMITTAL COPY
CPS ILTOIO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 125 SRO 295038 EA2.01 3.3 4.3 High Off-Site Release Rate Cognitive Level: HIGH Ability to determine and/or interpret the following Off-site as they apply to HIGH OFF-SITE RELEASE RATE:
Field teams have been dispatched due to a Radioactivity Release.
The field teams are located as follows:
Field Team 1 is at the Screenhouse.
Field Team 2 is 15 feet NORTH of the Highway 54 and Site Access Road intersection.
Field Team 3 is at the Meteorological Tower.
Field Team 4 is at the Shell Oil Pumping Station.
Which of the following describes which Field Team(s) is (are) OFF-SITE for the purposes of Emergency Classification?
A. All Field Teams B. 2 and 3 ONLY C. 2 and 4 ONLY K. D. 3 and 4 ONLY one NEW 0
ODCM rev 19 Explanation:
C is correct, 15 feet North of Highway 54 and Access Road and Shell Oil Pumping Station are OFF-SITE because it is neither owned, leased, nor otherwise controlled by AmerGen.
A is wrong, Field Team 1 and 3 are on site.
B is wrong, Field Team 3 is on site.
D is wrong, Field Team 3 is on site.
NRC SUBMITTAL COPY
CPS ILTOO1 NRC Written Exam Question Q# Exam System # KA # RO SRO LP # Objective 126 SRO 295014 AA2.05 4.2 4.6 87439 rev 2 1.1.3 Inadvertent Reactivity Addition Cognitive Level: HIGH Ability to determine and/or interpret the following Violation of safety limits as they apply to INADVERTENT REACTIVITY ADDITION:
"* Reactor Power was 90%
"* Turbine Bypass Valves opened due to an EHC Pressure Regulator malfunction.
"* Loss of Feedwater Heating, 4005.01 was entered
"* The A Reactor Operator adjusted RR Flow Control Valves to maintain Reactor power at 90%.
"* Feedwater Temperature has dropped 105'F.
"* 3D Monicore Official Case indicates that MCPR is 1.08 (1) What action should the Reactor Operator be directed to perform?
(2) Rated reactor power may be restored when approval is given by the (1) (2)
A. Scram the reactor per 4100.01, Plant Manager Reactor Scram B. Scra th4ectrpr41006.01, Nuclear Regulatory Commision Reactor Scram C. Insert the CRAM rods per 4005.01 Shift Manager Loss of Feedwater Heating D. Insert the CRAM rods per 4005.01 Reactor Engineer Loss of Feedwater Heating ANS: Reference Provided: Reference and Rev: Question Source: Ques Rev B None ITS 2.1.1.2 NEW 0 Explanation:
B is correct, MCPR safety limit is violated, Notify the NRC.
A is wrong, Notify the NRC C is wrong, Scram the reactor, Notify the NRC.
D is wrong, Scram the reactor, Notify the NRC.
NRC SUBMITTAL COPY