CP-200800348, Transmittal of Inservice Inspection Program Plan, Revision 3, (ASME Code Section XI 1998 Edition, 1999 and 2000 Addenda, Interval Start Date August 3, 2004, Second Interval)

From kanterella
Jump to navigation Jump to search
Transmittal of Inservice Inspection Program Plan, Revision 3, (ASME Code Section XI 1998 Edition, 1999 and 2000 Addenda, Interval Start Date August 3, 2004, Second Interval)
ML080720369
Person / Time
Site: Comanche Peak Luminant icon.png
Issue date: 03/06/2008
From: Blevins M, Madden F
Luminant Generation Co
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
CP-200800348, TXX-08046
Download: ML080720369 (254)
v • d • e


Text

Mike Blevins Luminant Power Executive Vice President P O Box 1002

& Chief Nuclear Officer 6322 North FM 56 Mike.Blevins @Luminant.com Glen Rose, TX 76043 Luminant T 254 897 5209 C 817 559 9085 F 254 897 6652 CP-200800348 Ref. # 10 CFR 50.55a(g)

Log # TXX-08046 March 6, 2008 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555

SUBJECT:

COMANCHE PEAK STEAM ELECTRIC STATION (CPSES)

DOCKET NO. 50-446 TRANSMITTAL OF UNIT 2 INSERVICE INSPECTION PROGRAM PLAN, REVISION 3 (UNIT 2: ASME CODE SECTION XI 1998 EDITION, 1999 AND 2000 ADDENDA, INTERVAL START DATE AUGUST 3, 2004, SECOND INTERVAL)

Dear Sir or Madam:

Enclosed is one copy of Revision 3 to the Unit 2 Inservice Inspection (ISI) Program Plan for updating your manual. The attached Plan Revision 3 replaces the Plan Revision 2 in its entirety. This transmittal does not contain a request for relief from ASME Code requirements.

If you have any questions or need- additional information regarding this matter, please feel free to contact Jack Hicks at (254) 897-6725.

Sincerely, Luminant Generation Company LLC Mike Blevins By:

Fred W. Madden z?3 2.)u Director, Oversight & Regulatory Affairs A member of the STARS (Strategic Teaming and Resource Sharing) Alliance Callaway Comanche Peak Diablo Canyon Palo Verde South Texas Project Wolf Creek K I.(c-

U. S. Nuclear Regulatory Commission TXX-08046 Page 2 03/06/2008 Enclosure Unit 2 Second Interval ASME Section XI Inservice Inspection Program Plan Revision 3 c- E. E. Collins, Region IV clo B. K. Singal, NRR Resident Inspectors, Comanche Peak clo A. P. Jones, Chief Inspector, TDLR

ENCLOSURE to TXX-08046 99 TXU LUMINANT COMANCHE PEAK NUCLEAR POWER PLANT (CPNPP) 6322 NORTH FM 56 GLEN ROSE, TEXAS 76043 UNIT 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN REVISION 3- EFFECTIVE DATE: FEBRUARY 28, 2008 COMMERCIAL OPERATION: AUGUST 3, 1993 SECOND INTERVAL START DATE: AUGUST 3, 2004 Prepared By: 6'I,-/")?/'7**0-ISI Engineer Reviewed By: - - - */, sic, ,

Technical Reviewer Approved By: - ' i" *- 2.2/2 Shaw Site.Director, Engineering and Technical Services Approved By: $/

/ z"7-.J--  :-- -

Luminant Engineering Manager

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN TABLE OF CONTENTS 1.0 Introduction 1.1 General Plant Description 1.2 Purpose 1.3 Responsibility 1.4 Scope 1.5 Acronyms 1.6 Exemptions 1.7 Weld Reference System 1.8 Relief Requests 1.9 Records of Retention 1.10 Authorized Inspection Agency 2.0 Examination Boundaries 2.1 ASME Code Boundaries 2.2 ISI Isometric Drawings 2.3 ISI Examination Boundary Drawings 3.0 Non-Destructive Examination Methods 3.1 Visual Examination (TWA-2210) 3.2 Surface Examination (IWA-2200) 3.3 Volumetric Examination (IWA-2230) 4.0 Examination Tables 4.1 Class 1 NDE 4.2 Class 2 NDE 4.3 Component Supports 4.4 Eddy Current 5.0 Pressure Testing 5.1 Purpose 5.2 Pressure Test Description 5.3 Pressure Test Requirements 6.0 Program Changes 4.0, 4.1, 4.2, 4.3 plus examination itemsheets (204 pages)

Appendix A Relief Requests Appendix B VT-2 System Pressure Test Listing Appendix C Applicable Code Cases Appendix D Ultrasonic Calibration Blocks Appendix E List of ISI Sketches Appendix F Record of Revision Page 2 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 1.0- INTRODUCTION 1.1 GENERAL PLANT DESCRIPTION The Comanche Peak Nuclear Power Plant (CPNPP) is a two unit plant containing pressurized water reactors, each with an electrical output of approximately 1150 MWe. CPSES was constructed to the ASME Boiler and Pressure Vessel Code,Section III, 1974 Edition, including Summer 1974 Addenda for piping and Winter 1974 Addenda for component supports.

1.2 PURPOSE The purpose of this plan is to provide details pertaining to performance of the Inservice Inspection (ISI) at CPNPP, Unit 2 (including common and Unit 1 systems required to support Unit 2 operations). This plan demonstrates compliance with the Code of Federal Regulations, 10CFR50.55a, and CPNPP Technical Specifications (TS) 5.5.9. This plan meets the requirements of the 1998 Edition of the ASME Boiler and Pressure Vessel Code, including 1999 and 2000 Addenda of Section XI, and Code Cases as identified in Appendix C of this plan (hereafter referred to as the Code).

1.3 RESPONSIBILITY Luminant (Owner)/ Designated Agent is responsible for preparation and maintenance of this ten year ISI Program Plan, including any required reference drawings and boundary drawings. The owner prepares each Outage Plan, which defines the scope of the examinations, determines the extent of any of the examinations, and defines the method of each exam. After each outage, this Plan is updated by the Owner/Designated Agent to reflect the completed examinations, and a summary report is prepared and submitted to the Regulatory and Enforcement Authorities. The Owner/Designated Agent is responsible for any associated craft labor required for the examinations, including access provisions, insulation removal; weld preparation, and other aspects. The Owner/Designated Agent is responsible for the evaluation of the ISI examination records, including indication evaluations and associated corrective actions.

A contractor working under the guidance of the Owner/Designated Agent, in most cases, performs the examinations. The contractor submits procedures and personnel certifications for performance of the examinations to the Owner/Designated Agent for review and approval. A contractor ISI Program Manager and a suitable number of examination teams, supplied with the required NDE equipment, are provided to complete the scheduled examinations for the outage. The contractor conducts the examinations, reviews the data, and makes suitable recommendations to the Owner/Designated Agent.

Page 3 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 1.4 SCOPE ISI, as used in this plan, is the program of planned examinations of welds, components and their supports, which is implemented during the service life of a commercial nuclear power plant. This plan addresses those examinations to be performed on ASME Class 1, 2 and 3 systems, and components as stipulated in the Code. ISI examinations will be performed in accordance with the schedule of Inspection Program B of the Code.

A risk-informed inspection (RI-ISI) program for selected ASME Code Class 1 and 2 piping welds(category welds B-F, B-J, C-F-1, and C-F-2) has been developed, submitted, and accepted by the NRC as an alternative to the requirements of Section XI of the ASME Code for Inservice Inspection. Relief Request A-I is authorized for the second 10-year interval of Unit 2 and is reflected in the Plan in Appendix A..

The examination of containment as stipulated in Subsections IWE and IWL of the Code are not within the ,scope of this plan.

1.5 ACRONYMS ANSI American National Standards Institute ASME American Society of Mechanical Engineers.

CPNPP Comanche Peak Nuclear Power Plant UFSAR Updated Final Safety Analysis Report ISI Inservice Inspection PSI Pre-Service Inspection PDI Performance Demonstration Initiative NDE Non-destructive Examination RI-ISI Risk Informed ISI RR Relief Request EVT Enhanced Visual Examination 1.6 EXEMPTIONS 1.6.1 Code Class 1 The following Code Class 1 components (or parts of components) are exempted from the volumetric and surface examination requirements of 1WB-2500 of the Code by IWB-1220; (a) components that are connected to the reactor coolant system and part of the reactor coolant pressure boundary, and that are of such a size and Page 4 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN shape so that upon postulated rupture the resulting flow of coolant from the reactor coolant system under normal plant operating conditions is within the capacity of makeup systems which are operable from on-site emergency power. The emergency core cooling -systems are excluded from the calculation of makeup capacity.

(b) (1) Piping of NPS 1 and smaller and their supports, except for steam generator tubing.

(2) Components, their supports and their connections in piping of NPS 1 and smaller.

(c) Reactor vessel head connections and associated piping, and their supports, NPS 2 and smaller, made inaccessible by control rod drive penetrations.

(d) Welds or portions of welds that are inaccessible due to being encased in concrete, buried underground, located inside apenetration, or encapsulated, by guard pipe.

1.6.2 Code Class 2 The following Code Class 2 components or parts of components are exempted from the volumetric and surface examination requirements of Subsection IWC-2500 of the Code by Subsection IWC-1220.

1.6.2.1 Components within Residual Heat Removal (RHR), Emergency Core Cooling (ECC), and Containment Heat Removal (CHR) Systems or Portions of Systems:

(a) For systems, except high pressure safety injection systems in pressurized water reactor plants:

(1) Piping NPS 4 and smaller (2) Vessels, pumps, and valves and their connections in piping NPS 4 and smaller (b) For high pressure safety injection systems in pressurized water reactor plants:

(1) Piping NPS 11/2 and smaller.

(2) Vessels, pumps, and valves and their connections in piping NPS 1 1/2 and smaller.

Page 5 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2- SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN (c) Vessels, piping, pumps, and valves, other components, and component connections of any size in statically pressurized, passive (i.e.,

no pumps) safety injection systems of pressurized water reactor plants.

(d) Piping and other components of any size beyond the last shutoff yalve in open ended portions of systems that do not contain water during normal plant operating conditions.

1.6.2.2 Components within systems or portions of systems other than RHR, ECC, and CHR Systems:

(a) For systems, except auxiliary feedwater systems pressurized water reactor plants:

(1) Piping NPS 4 and smaller (2) Vessels, pumps, and valves and their connections in piping NPS 4 and smaller (b) For auxiliary feedwater systems in pressurized reactor plants:

(1) Piping NPS 1 1/2 and smaller (2) Vessels, pumps, and valves and their connections in piping NPS 1 1/2 and smaller.

(c) Vessels, piping, pumps, valves, other components, component connections of any size in systems or of systems that operate (when the system function is required) at a pressure equal to or less than 275 psig at a temperature equal to or less than 200'F (93°C).

(d) Piping and other components of any size beyond last shutoff valve 'in open ended portions of systems do not contain water during normal plant operating conditions.

1.6.2.3 Inaccessible Welds Welds or portions of welds that are inaccessible due to being encased in concrete, buried underground, located inside a penetration, or encapsulated by guard pipe.

1.6.3 The following components or parts of components are exempted from the VT-1 visual examination requirements of IWD-2500 of the Code by IWD-1220:

(a) Piping NPS 4 and smaller.

(b) Vessels, pumps, and valves and their connections in piping NPS 4 and smaller.

Page 6 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2- SECOND INTERVAL ASME SECTION XI INSER VICE INSPECTION PROGRAM PLAN (c) Components that operate at a pressure of 275 psig or less and at a temperature of 200'F (93 0C) or less in systems (or portions of systems) whose function is not required in support of reactor residual heat removal, containment heat removal, and emergency core cooling.

(d) Welds or portions of welds that are inaccessible due to being encased in concrete, buried underground, located inside a penetration, or encapsulated by guard pipe.

1.7 WELD REFERENCE SYSTEM Weld areas subject to surface or volumetric examination shall be identifiable through a reference system as specified by Subsection IWA-2600 and Appendix III of the Code. This system shall consist of a combination of physical markings and written direction provided in this plan and in site implementing procedures.

Welds within the boundaries of the ISI program are uniquely identified on isometric drawings, which provide weld numbers and locations. In those cases where the physical configuration Will not provide positive weld location, dimensional information can be obtained from construction isometric drawings or piping fabrication drawings to allow for such positive identification.

Welds which were inadvertently not marked or whose marks have been removed shall be marked at the time inservice inspection is performed. The method of marking these indications on the pipe will be delineated in the implementing procedures.

1.8 RELIEF REQUESTS Where a particular examination requirement of the Code is determined to be impractical, a request for relief from the requirement shall be submitted pursuant to the requirement of 10CFR5O.55a (a)(3).

Each request for relief should contain the following information, as a minimum:

(a) System/Component for which relief is requested; (b) Code requirement; (c) Code requirement from which relief is requested; (d) Proposed alternative; (e) Basis of alternative for providing acceptable level of quality and safety; and, (f) Duration of proposed alternative.

Page 7 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 1.9 RECORDS OF RETENTION Records and documentation of information and examination results, which provide the basis for evaluation and facilitate the comparison of examination results from previous and subsequent examinations, shall be maintained as permanent plant records at CPNPP in accordance with Article IWA-6000 of the Code. As a minimum, this documentation shall include the applicable records described in Subsection IWA-6340.

1.10 AUTHORIZED INSPECTION AGENCY In accordance with Subsection lWA-1400, paragraph (f), of the Code, Owner/Designated Agent has maintained a contract with an Authorized Inspection Agency. (AIA) for an Authorized Nuclear Inservice Inspector (ANII) to provide inspection services as described in Subsection IWA-21 10 of the Code. The ANII is afforded the opportunity to verify examinations and review the plan, examination procedures, examination records, certification records, and other associated documents.

2.0 EXAMINATION BOUNDARIES 2.1 ASME CODE BOUNDARIES ASME Code classification and system boundaries of the piping and other components subject to examination have been identified as required by Subsection TWA-1400(a) of the Code. Section 3.2 of the CPNPP UFSAR defines the various safety classes of piping and components in accordance with Regulatory Guide 1.26 and ANSI Standard N18.2. The plant piping schematic drawings (flow diagrams) show these class interfaces and the ISI examination boundary drawings were developed from these flow diagrams.

2.2 ISI ISOMETRIC DRAWINGS ISI isometric drawings have been developed to identify the ISI examination areas' for examinations required by ASME Section XI tables IWB-2500, IWC-2500, and IWF-2500 (class 1 and 2 only). These drawings are maintained current by CPNPP. Revisions to these ISI isometric drawings are prepared and approved in accordance with site implementing procedures.

Plant piping drawings (BRP, BRHL, GHH), individual pipe support drawings and vendor drawings for vessels, pumps, and valves are specifically used to identify examination areas for examinations as required by ASME Section XI tables IWD-2500 and IWF-2500 (Code class 3) and also provide references for class 1 and 2 examinations.

Page 8 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 2.3 ISI EXAMINATION BOUNDARY DRAWINGS The following ISI examination boundary drawings, which are part of the ISI Program and are found in revision 0 of the Program Plan, delineate the bounds within which the ISI examination requirements of the Code are applied. The plant systems included in theexamination boundary are listed below:

AF - Auxiliary Feedwater CC - Component Cooling Water CH - Chilled Water System CS - Chemical and Volume Control CT - Containment Spray DD - Demineralized &SReactor Make-up Water DO - Diesel Oil FW - Feedwater MS - Main Steam RC - Reactor Coolant RH - Residual Heat Removal SI - Safety Injection SW - Service Water Flow diagrams for each :system are marked up from the boundary drawings and become part of the VT-2 system pressure test packages.

3.0 NON-DESTRUCTIVE EXAMINATION (NDE) METHODS The method of examination for each weld, component, or support is specified in the examination tables found in subsection 4.1, 4.2, and 4.3 of this plan. These methods, as described below, are in accordance with Article IWA-2000 of the Code.

Page 9 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 3.1 VISUAL EXAMINATION (IWA-2210) 3.1.1 VT-1 (IWA-2211)

VT-I examinations are conducted to detect discontinuities and imperfections on the surfaces of components, including such conditions as cracks, wear, corrosion, or erosion.

3.1.2 VT-2 (IWA-2212)

,(a) VT-2 examinations are conducted to detect evidence of leakage from pressure retaining components, with or without leakage collection systems, as required during the conduct of system pressure test.

(b) VT-2 examinations shall be conducted in accordance with IWA-5000. For direct examination, the Table IWA-2210-1 maximum examination distance shall apply to the distance from the eye to the surfaces being examined.

3.1.3 VT-3 (IWA-2213)

VT-3 examinations are conducted to determine the general mechanical and structural condition of components and their supports by verifying parameters such as clearances, settings, and physical displacement; and to detect discontinuities and imperfections, such as loss of integrity at bolted or welded connections, loose or missing parts, debris, corrosion, wear, or erosion. VT-3 includes examinations for conditions that could affect operability or functional adequacy of snubbers and constant load and spring type supports.

3.2 SURFACE EXAMINATION (IWA-2220)

(a) A surface examination indicates the presence of surface discontinuities. It may be conducted by a magnetic particle, a liquid penetrant, or an eddy current method.

(b) Any linear indication that exceeds the allowable linear surface flaw standards shall be recorded.

3.2.1 Magnetic Particle Examination (IWA-2221)

The magnetic particle (MT) examination shall be conducted in accordance with Article 7 of Section V of the ASME Boiler and Pressure Vessel Code. MT of coated materials shall be conducted in accordance with Article 7 , Appendix I if Section V.

Page 10 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 3.2.2 Liquid Penetrant Examination (IWA-2222)

The liquid penetrant (PT) examination shall be conducted in accordance with Article 6 of Section V of the ASME Boiler and Pressure Vessel Code.

3.2.3 Eddy Current Examination (IWA-2223)

Eddy current (EC) examination for detection of surface flaws shall be conducted in accordance with Appendix IV of the Code.

3.3 VOLUMETRIC EXAMINATION (IWA-2230)

A volumetric examination indicates the presence of discontinuities throughout the volume of material.

3.3.1 Radiographic Examination (RT) (IWA-223 1)

This volumetric examination is conducted to detect discontinuities using penetrating radiation with appropriate image-recording devices. This examination shall be conducted in accordance with Article 2 of Section V of the ASME Boiler and Pressure Vessel Code.

3.3.2 Ultrasonic Examination (UT) (IWA-2232)

This volumetric examination is conducted to detect discontinuities using appropriate ultrasonic instrumentation in accordance with Appendix I of Section XI of the ASME Code.

3.3.3 Eddy Current Examination (EC) (IWA-2233)

This volumetric examination is conducted to detect discontinuities in heat exchanger tubing using electromagnetic principles in accordance with the provisions of Section V of the ASME Code, Article 8, Appendix II. For Inspection Program for Steam Generator Tubing refer to ASME Section XI Subsection IWB-2413 and paragraph 4.4 below.

Page 1 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 4.0 EXAMINATION TABLES CPNPP ASME Section XI Inservice Inspection Plan tables 4.1 through 4.3 have been developed and contain the following information:

a) System Names (identified in Section 2.3of the Plan) b) Summary Number - A computer data base assigned sequencing number.

c) Line Number of Component Number - Example: 6-SI-2-089-2501R-1 or TCX-RCPCRV-01.

d) Weld Number or Pipe Support Number - Example: TCX-I-1 100-8 or CC-2-105-012-E33K.

e) ASME Sec. XI Category and Item Number - Described in ASME Sec.

XI Examination Tables (IWX-2500-1).

f) NDE Method - Identifies the examination method(s) as described in section 3 of this plan.

g) Plan Status - Identifies the inspection interval, period and outage h) Year - Example: 83, the year that PSI was performed.

i) Instructions - Notes applicable to specific inspection requirements.

j) Calibration Block - Example: TBX-18.

k) Notes - Applicable to the results of specific outages preceded by the outage year, "84" refers to the baseline outage.

4.1 CLASS 1 NDE This subsection describes the examination areas and NDE methods for the Class 1 pressure retaining components and associated component integral welded attachments as specified in Article IWB of the Code.

For pressure testing, refer to Section 5 below.

Class 1 valve bodies exceeding 4" NPS have been grouped according to size, constructional design, manufacturing method, and function in accordance with Table IWB-2500-1, Category B-M-2, and Note 3 of the Code. These groups are delineated below. One valve from each group has been selected for examination as denoted by the asterisk "*"

These examinations are only required to be performed if the component is disassembled for maintenance, repair or other testing Group 1 - 6"Forged Pressurizer Relief Valves 2-8010A (reference TCX- 1-4501 for location) 2-801 OB 2-801 OC Page 12 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN Group 2 - 12" Forged Gate Valves Isolating the RC System from the RHR System 2-8701A . (reference TCX- 1-4101 for location) 2-8701B 2-8702A 2-8702B Group 3 10" Forged Check Valves Isolating the RC System from the SI System 2-8948A 2-8948B 2-8948C 2-8948D 2-8956A 2-8956B 2-8956C 2-8956D (reference TCX-1-4402 for location)

Group 4 - 6" Forged Check Valves Isolating the RC System from the SI System 2-8818A 2-8818B 2-8818C 2-8818D (reference TCX- 1-4403 for location) 2-8949A 2-8949B 2-8949C 2-8949D 2-8841A 2-8841B 4.2 CLASS 2 NDE This subsection describes the examination areas and NDE methods for the Class 2 pressure retaining components and associated component integral welded attachments as specified in Article IWC of the Code. For pressure testing, see Section 5.

Class 2 valve body welds have been grouped according to design, size, function and service in a system in accordance with Table IWC-2500-1, Category C-G, Note 1 of the Code. These groups are delineated below. One valve from each group has been selected for examination as denoted by the asterisk "*"

Page 13 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN Group 1 - 8" Forged Gate Valves, MS Safety Isolation 2MS-026 2MS-063 2MS-098  !ýIJ: (reference TCX-2-2300 for location) 2MS-134 Group 2 - 18" Forged Gate Valves, Main Feedwater Isolation 2FW-071 2FW-077 (reference TCX-2-2202 for location) 2FW-083 2FW-089 Group 3 - 6" Forged Check Valves, Feedwater 2FW-191 2FW- 192 2FW-193 * (reference TCX-2-2204 for location) 2FW- 194 2FW-195 2FW-196 2FW-197 2FW-198 2FW-199 2FW-200 2FW-201 2FW-202 Group 4 - 6" Forged Gate Valves, Auxiliary Feedwater Isolation 2FW-203 * (reference .TCX-2-2403 for location) 2FW-204 2FW-205 2FW-2o6 Group 5 - 12" Forged Gate Valves, Containment Spray Isolation 2CT-0026 2CT-0028 * (reference TCX-2-2578 for location) 2CT-0078 2CT-0084 Page 14 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN Group 6 - 12" Forged Gate Valve, Safety Injection 2SI-0048 * (reference TCX-2-2582 for location) 4.3 COMPONENT SUPPORTS This subsection describes the examination areas and requirements for the Class 1, 2 and 3 component supports and Class 3 Integral Welded Attachments as specified in Article IWF and IWD of the Code, respectively. For pressure testing of Class 3 components, see Section 5.

In lieu of the requirements of Technical Specifications relating to snubbers, specifically those ISI requirements (e.g., plans, schedules, reports, inspector involvement, and Code Data Reports) of ASME Section XI, snubbers shall be demonstrated operable bly performance of the augmented inservice inspection program as described in the ASME OM Code, Subsection ISTD.

4.4 EDDY CURRENT Eddy Current testing (ET) of the steam generator tubes, shall be governed by Plant Technical Specifications; results of the examination shall be evaluated against acceptance criteria contained in TS 5.5.9. The steam generator tubes are examination category B-Q, Item No. 16.20, per ASME Section XI. The.need for reporting requirements; the corrective action including expanded examination samples shall also be governed by the Technical Specifications. Other examination parameters shall be in accordance with ASME Section XI. These measures will provide compliance with the inspection requirements of Reg.

Guide 1.83.

Procedure NDE 7.10, "Steam Generator Tube Selection and Examination" lists the tubes repaired by steam generator number and the type of plugs installed.

The information in this table is cumulative and is updated after each refueling outage.

The following License Amendment Request (LAR) numbers have been taken for Eddy Current testing:

98-006 Revision to SG tube plugging criteria Page 15 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN 5.0 PRESSURE TESTING 5.1 PURPOSE This section of the ISI Plan identifies pressure test requirements for ASME Code Class 1, 2, and 3 pressure retaining piping and components at CPNPP Unit 2 as defined in Subsection IWA-5000 of the Code.

This section defines pressure test boundaries, establishes test frequencies, required tests and test pressures and temperature as required by the Code.

The system pressure test for repair/replacement activities shall be in accordance with Subsection IWA-5120 of the Code.

5.2 PRESSURE TEST DESCRIPTION Pressure retaining components within each system boundary is subjected to the following applicable system pressure tests as referenced in the ASME Section XI, Table IWA-5210-1, under which conditions a VT-2 visual examination is performed in accordance with IWA-5240 to detect leakage.

5.2.1 IWA-5211(a)

A system leakage test is conducted while the system is in operation, during a system operability test, or while system is at rest conditions using an external pressurization source; 5.2.2 IWA-521 1(b): A system hydrostatic test conducted during a plant shutdown at an elevated test pressure as specified in IWB-5230, IWC-5230, or IWD-5222; and

5.2.3 TWA-5211(c)

A system pneumatic test conducted in lieu of either of the above system pressure tests for Class 2 or 3 components as permitted by IWC-5000 or IWD-5000, the requirements for system leakage and hydrostatic tests are applicable to pneumatic tests.

5.3 PRESSURE TEST REQUIREMENTS A system pressure test and accompanying VT -2 examination shall be performed in accordance with Articles IWA-5000, IWB-5000, IWC-5000 and IWD-5000 and the related tables, Tables IWA-5210-1, 1WB, IWC and IWD-2500-1 of the Code. The plant systems identified in the ISI boundary are found in Section 2.3.

A VT-2 system pressure test listing, identified in Appendix B, breaks up the system into smaller VT-2 packages and work orders and are scheduled and completed on a period basis. This list tracks the scheduled and completed VT-2 examinations during a period and supports the completed OAR-1 Report.

Page 16 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN Insulated Bolted Connections:

IWA-5242 states that borated systems controlling reactivity shall have insulation removed from pressure retaining bolted connections during VT -2 visual exams.

In lieu of performing this examination at plant start-up and after removing/

reinstalling the insulation at these bolted connections, an alternate examination was done using approved Code Case N-533-1. This alternate examination allowed for removing the insulation and conducting the bolted joint exams for class 1 systems during refueling. VT -3 certified personnel having the required VT-2 certifications then perform the exams of the bolted connections looking for evidence of leakage per the list of components provided in Preventative Maintenance (PM) work orders(legacy PM 344682).

6.0 PROGRAM CHANGES Class 1 NDE, Class 2 NDE, and component support exams that are substituted for other exams are identified in the following table per the requirements of IWA-2420(b)(5).

Based on the limitations of the ISI data base program, exams that are no longer conducted do not appear on the Class 1 NDE, Class 2 NDE, and component support tables. The table, on the next page, clearly identifies the specific exams affected rather than reviewing the history of changes made per each specific revision of the Program Plan.

Page 17 of 18

COMANCHE PEAK NUCLEAR POWER PLANT UNIT NO. 2 - SECOND INTERVAL ASME SECTION XI INSERVICE INSPECTION PROGRAM PLAN Weld/Conip Code Replacement Code Outage Justification Number Cat. Weld/Comp Cat TCX-1-4506- B-J TCX- 1-4506- B-J 2RF07 Replaced because of interference 15 R1.11 17 RI.ll between the weld and a clamp for a vertical pipe support. Removal of the clamp would have required temporarily supporting the line in a high radiation area. Selected another weld on the same line segment, having the same risk category and ranking.

TCX-1-4101-4 B-J TCX- 1-4401- B-J 2RF07 Replaced because of interference R1 4 R1 between the weld and a clamp for none none a pipe support. Clamp could not be easily removed or loosened.

Selected another weld having the same risk category and ranking.

TCX-2-2581-6 C-F-1 TCX-2-2581- C-F-1 2RF07 Replaced because the weld is RI 7 RI located too close to a penetration none none seal, which interferes with the exam and the seal is not easily removable. Selected another weld which has the same risk category and ranking.

Page 18 of 18

1/16/2008 COMANCHE PEAK UNIT 2 PAGE: 1 REVISION: 3 INSERVICE INSPECTION

SUMMARY

FOR THE SECOND INTERVAL SECTION XI

SUMMARY

NUMBER OF COMPONENTS (SCHEDULED / COMPLETED / PERCENTAGE OF REQUIREMENT)

CATEGORY COMPONENTS REQUIRED FIRST PERIOD SECOND PERIOD THIRD PERIOD

-- - - -....- - a . ........-

B-A 24 24 1 1 4% 3 0 16% 20 100%

B-B 8 8 2 2 25% 4 0 75% 2 100%

B-D 36 36 i0 10 27% 6 0 44% 20 100%

B-G-1 181 165 0 0 0% 0 0 0% 165 100%

B-G-2 68 19 4 4 21% 6 0 53% 9 100%

B-K 10 8 2 2 25% 4 0 75% 2 100%.

B-L-1 1 1 0 0 0% 0 0 0% 1 100%

B-L-2 1 1 0 0 0% 0 0 0% 1 100%

B-M-2 25 4 1 1 25% 3 0 100% 0 100%

B-N-I 1 3 1 1 33% 1 0 66% 1 100%

B-N-2 1 1 0 0 0% 0 0 0% 1 100%

B-N-3 1 1 0 0 0% 0 0 0% 1 100%

B-O 28 4 0 0 0% 0 0 0% 4 .100%

.19 4 4 21% 10 0 73% 5 C-A 19 100%

C-B 8 8 2 2 25% 2 0 50% 4 100%

C-C 97 95 25 25 26% 39 0 67% 31 100%

1 C-D 1 1 1 100% 0 0 100% 0 100%

C-G 27 6 2 2 33% 2 0 66% 2 0 100%

D-A 141 140 41 41 29% 51 0 65% 48 0 100%

F-A (1) 289 85 18 18 21% 27 0 53% 40 0 100%

F-A (2) 572 252 61 61 24% 103 0 65% 88 0 100%

F-A (3) 861 168 54 54 32% 66 0 66% 48 0 100%

F-A (NPS) 143 102 32 32 31% 44 0 75% 26 0 100%

R-A 3199 144 39 39 27% 57 0 67% 48 0 100%

300------300------23---.

TOTALS 5388 1295 300 300 23%. 42B 0 56% 567 0 100%

NOTE: (1) Item FI.10; CLASS 1 PIPING SUPPORTS (2) Item F1.20; CLASS 2 PIPING SUPPORTS (3) Item F1.30; CLASS 3 PIPING SUPPORTS (NPS) Item FI.40; SUPPORTS OTHER THAN PIPING SUPPORTS (CLASS 1, 2, 3 AND MC) 4.0 PAGE 1 of 3

4.0 EXAMINATION TABLES CPSES ASME Section XI Inservice Inspection Plan tables 4.1 through 4.3 have been developed and contain the following information:

a) System Name.

b) Summary Number - A computer data base assigned sequencing number.

c). Line Number of Component Number- Example: 6-SI 089-2501R-1 or TCX-RCPCRV-01.

d) Weld Number or Pipe Support Number - Example: TCX-I-1100-8 or CC-I-105-012-E33K.

e) ASME Sec. XI Category and Item Number - Described in ASME Sec. XI Examination Tables (IWX-2500-1).

NDE Method - Identifies the examination method(s) as described in section 3 of this plan.

g) Plan Status - Identifies the inspection interval, period and outage h) Year - Example: 83, the year that PSI was performed.,

i) Instructions - Notes applicable to specific inspection requirements.

j) Calibration Block - Example: TBX-1 8.

k) Notes - Applicable to the results of specific outages.

preceded by the outage year, "84" refers to the baseline outage.

4.0 Page 2 of 3

COMANCHE PEAK UNIT 2 INSERVICE INSPECTION PLAN CLA.SSI COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND PTEIRD I (A) ASME I PERIOD PERIOD PERIOD I l

SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE I-------- OUTAGE ---------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 1 -CALIBRATION BLOCK*

(C) (G)

(B) (D) (E) (F) (H) (I)

(3)

(K) 4.0 Page 3 of 3

4.1 CLASS 1 NDE This subsection describes the examination areas and NDE methods, for the Class I pressure retaining components and associated component integral welded attachments as specified in Article IWB of the Code.

For pressure testing, refer to Section 5 below.

Class I valve bodies exceeding 4" NPS have been grouped according to size, constructional design, manufacturing method, and function in accordance with Table IW3B-2500-1, Category B-M-2, and Note 3 of the Code. These groups are delineated below.

One valve from each group has been selected for examination as denoted by the asterisk "*"

These examinations are only required to be performed if the component is disassembled for maintenance, repair or other testing.

Group 1 - 6" Forged Pressurizer Relief Valves 2-8010A (reference TCX- 1-4501 for location) 2-8010B 2-801 OC Group 2 - 12" Forged Gate Valves Isolating the RC System from the RHR System 2-8701A (reference TCX- 1-4101 for location) 2-8701B 2-8702A 2-8702B Group 3 - 10" Forged Check Valves Isolating the RC System from the SI System 2-8948A 2-8948B 2-8948C 2-8948D 2-8956A 2-8956B 2-8956C 2-8956D (reference TCX-1 -4402 for location) 4.1 Page 1 of 2

Group 4 - 6"'Forged Check Valves Isolating the RC System from the SI System 2-8818A 2-8818B 2-881 8C 2-8818D (reference TCX-1-4403 for location) 2-8949A 2-8949B 2-8949C 2-8949D 2-8841A 2-8841B 4.1 Page 2Tf 2

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE:

INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS

.INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI CATGY NDE OUTAGE

SUMMARY

EXAMINATION AREA INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 000100 TCX-1-1100-1 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV FLANGE TO SHELL WELD B1.30 2' - - - - X -

R157 830RB

    • PDI-01**

000200 TCX-1-1100-2 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV UPPER TO INTERMEDIATE SHELL B1.11 2 -- -X -

WELD

    • PDI-01**

000300 TCX-1-1100-3 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV INTERMEDIATE TO LOWER SHELL B1.11 2 - - -X -

WELD

    • PDI-01**

000400 TCX-1-1100-4 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV LOWER SHELL TO BOTTOM HEAD B1.11 2 - X -

WELD

    • PDI-01**

000500 TCX-1-1100-5 B-A UT 82 TDLR VERIFICATION BOUNDARY.

RV LOWER HEAD CIRCUMFERENTIAL B1.21 2 - X -

WELD

    • PDI-01**

000600 TCX-1-1100-6 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV UPPER SHELL LONGITUDINAL B1.12 2 - -X WELD

    • PDI-01**

000700 TCX-1-1100-7 B-A UT 83 TDLR VERIFICATION BOUNDARY.

.RVUPPERSHELL LONGITUDINAL B1.12 2 - x WELD

    • PDI-01**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 2 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 12 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 000a00 TCX-1-1100-8 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV UPPER SHELL LONGITUDINAL B1.12 2 - - - X WELD

    • PDI-01**

000900 TCX-1-1100-9 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV INTERMEDIATE SHELL B1.12 2 - - -X LONGITUDINAL WELD

    • PDI-01**

001000 TCX-1-1100-10 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV INTERMEDIATE SHELL B1.12 2 - X. -

LONGITUDINAL WELD

    • PDI-01**

001100 TCX-1-1100-11 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV INTERMEDIATE SHELL B1.12 2 - - -X LONGITUDINAL WELD

    • PDI-01**

001200 TCX-1-1100-12 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV LOWER SHELL LONGITUDINAL B1.12 -- -X WELD

    • PDI-01**

001300 TCX-1-1100-13 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV LOWER SHELL LONGITUDINAL B1. 12 2 - X -

WELD

    • PDI-01**

001400 TCX-1-1100-14 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV LOWER SHELL LONGITUDINAL B1.12 2 - X -

WELD

    • PDI-01**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 3 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD- PERIOD PERIOD SEC. XI S-OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 001500 TCX-1-1100-15 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV BOTTOM HEAD MERIDIONAL WELD B1.22 2 X -

    • PDI-01**

001600 TCX-1-1100-16 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV BOTTOM HEAD MERIDIONAL WELD B1.22 2 X -

    • PDI-01**

001700 TCX-1-1100-17 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV BOTTOM HEAD MERIDIONAL WELD B1.22 2 - X

    • PDI-01**

001800 TCX-1-1100-18 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV BOTTOM HEAD MERIDIONAL WELD B1.22 2 X

    • PDI-01**

001850 TCX-1-1100-LUGS *B-N-2 VT- 3 83 TDLR VERIFICATION BOUNDARY.

CORE SUPPORT LUGS (6) BI3 .60 2 - X -

001900 TCX-1-1100A-19 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE TO VESSEL B3.90 2 - X WELD R157 830RB **RV-7, PDI-01**

001910 TCX-1-1100A-19IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE INNER RADIUS B3.100 EVT 2 R157 830RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 4 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD' ASME PERIOD, PERIOD PERIOD SEC. XI NDE ------------ --OE---------------

SUMMARY

EXAMINATION AREA CATGY NDE T 0 U T A G E INSTRUCTIONS IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 NUMBER **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 002000 TCX-1-1100A-20 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE TO VESSEL WELD B3.90 2 - - -X -

    • RV-7 ,PDI-01**

002010 TCX-1-1100A-20IR I B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE INNER RADIUS B3.100 EVT 2 - - -X -

002100 TCX-1-1100A-21 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE TO VESSEL WELD B3.90 2 - X -

    • RV-7 ,PDI-01**

002110 TCX-1-1100A-21IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE INNER RADIUS B3.100 EVT 2 - X 002200 TCX-1-1100A-22 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE TO VESSEL B3.90 2 X -

WELD R157 830RB **RV-7 PDI-01**

002210 TCX-1-II00A-22IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE INNER RADIUS B3.100 EVT 2 - X R157 830RB 002300 TCX-1-1100A-23 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE TO VESSEL B3 . 90 X WELD R157 830RB **RV-7 PDI-01**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 5 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRS T SECOND THIRD ASME PERI OD PERIOD PERIOD SEC. XI

- -OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS t

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK REACTOR COOLANT TCX-RCPCRV-01 002310 TCX-1-1100A-23IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE INNER RADIUS B3.100 EVT 2 -- -X R157 830RB 002400 TCX-1-1100A-24 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE TO VESSEL WELD 33.90 2 - X -

    • RV-7 ,PDI-01**

002410 TCX-1-1100A-24IR 13-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE INNER RADIUS B3.100 EVT 2 - - X -

    • RV-I**

002500 TCX-1-1100A-25 13-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE TO VESSEL WELD B3.90 -- - -

    • RV-7 ,PDI-01**

002510 TCX-1-1100A-25IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV INLET NOZZLE INNER RADIUS B3.100 EVT 2 -- -

002600 TCX-1-1100A-26 B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE TO VESSEL B3.90 2 X WELD R157 830RB **RV-7 ,PDI-01**

002610 TCX-1-1100A-26IR B-D UT 83 TDLR VERIFICATION BOUNDARY.

RV OUTLET NOZZLE INNER RADIUS B3.100 EVT 2 - x -

R157 830RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 6 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -----__-_ -PLAN STATUS PRESERVICE YEAR II FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD J

SEC. XI I OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS I

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATIOr N BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 002700 TCX-1-1100A-LIG B-G-1 UT 83 TDLR VERIFICATION BOUNDARY.

RV FLANGE LIGAMENTS (1/54) B6. 40 2 - X *-

R157R830RB

    • RV-3**

002800 TCX-I-1200-INT B-N-I VT-3 82 TDLR VERIFICATION BOUNDARY.

RV INTERNALS (ACCESS DURING BI3 . 10 2 - C X - X -

REFUELING)

R157 832RB 002805 TCX-1-1200-CSS B-N-3 VT-3 82 TDLR VERIFICATION BOUNDARY.

RV CORE SUPPORT STUCT-NO BI3 . 70 2 - - - X -

ACCESS @ REFUEL 003100 TCX-l-1300-1 B-A UT 83 TDLR VERIFICATION BOUNDARY RV CLOSURE HEAD TO FLANGE WELD B1.40 MT 2 C RI57R832RB

    • TBX-29**

003200 TCX-i-1300-2 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV CLOSURE HEAD RING TO DISC BI.21 2 X WELD R157R832RB **TBX-29**

003300 TCX-I-1300-3 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV CLOSURE HEAD MERIDIONAL B1.22 2 -

WELD RI57R832RB **TBX-29**

003400 TCX-I-1300-4 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV CLOSURE HEAD MERIDIONAL B1.22 2 - - -X WELD

    • TBX-29**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 7 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _______ PRESERVICE YEAR I FIRST SECOND THIRD I ASME PERIOD PERIOD PERIOD SEC. XI ----------

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE-------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 - 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 003500 TCX-1-1300-5 B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV CLOSURE HEAD MERIDIONAL B1.22 2 - X -

WELD

    • TBX-29**

003600 TCX-1-1300-G B-A UT 83 TDLR VERIFICATION BOUNDARY.

RV CLOSURE HEAD MERIDIONAL B1.22 2 - X - -

WELD

    • TBX- 29**

003700 TCX-1-1300-CB75 B-G-2 VT-i 84 TDLR VERIFICATION BOUNDARY.

CONOSEAL BOLTING B7.80 2 - - -

-X -

R157 860RB 003800 TCX-1-1300-CB76 B-G-2 VT-1 84 TDLR VERIFICATION BOUNDARY.

CONOSEAL BOLTING B7.80 2 - - -X -

R157 860RB 003900 TCX-1-1300-CB77 B-G-2 VT- i 84 TDLR VERIFICATION BOUNDARY.

CONOSEAL BOLTING B7.80 2 R157 860RB 004000 TCX-1-1300-CB78 B-G-2 VT- 1 84 TDLR VERIFICATION BOUNDARY.

CONOSEAL BOLTING B7.80 2 X R157 860RB 005150 TCX-1-1300A-CRD75 B-0 PT 83 TDLR VERIFICATION BOUNDARY.

CONTROL ROD DRIVE B14 . 10 - -X R155 86ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 8 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I ----------- ---------

SUMMARY

EXAMINATION AREA CATGY NDE I OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 11 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 005200 TCX-1-1300A-CRD76 B-O PT 83 TDLR VERIFICATION BOUNDARY.

CONTROL ROD DRIVE B14 . 10 2 - X -

005250 TCX-1-1300A-CRD77 B-0 PT 83 TDLR VERIFICATION BOUNDARY.

CONTROL ROD DRIVE B14. 10 2 -

005300 TCX-1-1300A-CR1D78 B-0 PT 83 TDLR VERIFICATION BOUNDARY.

CONTROL ROD DRIVE B14. 10 2 - - -X -

005400 TCX-1-1400-1 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - X -

R160 905RB

    • TBX-52**

005420 TCX-1-1400-2 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 - X RI60 905RB

    • TBX-52**

005440 TCX-1-1400-3 B-G-i UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X RI60 90SRB

    • TBX-52**

005460 TCX-1-1400-4 9-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 X RI60 905RB

    • TBX-52**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE:

INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

----------- -OUTAGE-

SUMMARY

EXAMINATION AREA CATGY NDE 20 U TA G 2E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 w*CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 005480 TCX-1-1400-5 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - -X R160 905RB

    • TBX-52**

005500 TCX-1-1400-6 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - X -

RI60 905RB 005520 TCX-1-1400-7 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X -

RI60 905RB

    • TBX-52**

005540 TCX-1-1400-8 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - - --- X -

R160 905RB

    • TBX-52**

005560 TCX-1-1400-9 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 x RI60 905RB

    • TBX-52**

005580 TCX-1-1400-10 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - x -

RI60 905RB

    • TBX-52**

005600 TCX-1-1400-11 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD BG. 30 x RI60 905RB

    • TBX-52**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 10 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STA TUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI G-- -----------

SUMMARY

EXAMINATION AREA CATGY NDE - U T A INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 005620 TCX-1-1400-12 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD, B36.30 2 - - -X -

RI60 905RB

    • TBX-52**

005640 TCX-1-1400-13 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - .X -

RI60 905RB

    • TBX-52**

005660 TCX-1-1400-14 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 - -X -

R160 905RB

    • TBX-52**

005680 TCX-1-1400-15 B-G-1 UT .82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - X -

R160 905RB

    • TBX-52**

005700 TCX-1-1400-16 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6. 30 2 - X -

RI60 905RB K

    • TBX-52**

005720 TCX-1-1400-17 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD BE6.30 2 - X R160 905RB

    • TBX-52**

005740 TCX-1-1400-18 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 X R160 905RB

    • TBX-52**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 11 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE- - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

RF.ACTOp COOLANT TCX-RCPCRV-01 005760 TCX-1-1400-19 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - -- -X -

R160 905RB

    • TBX-52**

005780 TCX-1-1400-20 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - -- -X -

RIGO 905RB

    • TBX-52**

005800 TCX-1-1400-21 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 X -

R160 905RB

    • TBX-52**

005820 TCX-1-1400-22 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6,30 2 - X RI60 905RB

    • TBX-52**

005840 TCX-1-1400-23 B-C-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 2 X R160 905RB

    • TBX-52**

005860 TCX-1-1400-24 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X Ri60 905RB

    • TBX-52**

005880 TCX-1-1400-25 B-G-1 UT .82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 2 - -X -

R160 905RB

    • TBX-52**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 12 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS--- PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - - - - - - I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

PKAC'TDN CDDT.ANT TCY-NCPCPV-01 REACTOR COOLANT TCX-RCPCRV-01 005900 TCX-1-1400-26 B-G-1 UT 82 TDLRVERIFICATION BOUNDARY.

RV STUD B6.30 2- X -

R160 905RB

    • TBX-52**

005920 TCX-1-1400-27 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - -- -X -

Ri60 905RB

    • TBX-52**

005940 TCX-I-1400-28 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 X -

RI60 905RB

    • TBX-52**

005960 TCX-1-1400-29 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - X Ri60 905RB

    • TBX-52**

005980 TCX-1-1400-30 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 X -

Ri60 905RB

    • TBX-52**

006000 TCX-1-1400-31 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 X -

RI60 905RB

    • TBX-52**

000020 TCX-i-1400-32 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B5.30 2 - X -

R160 905RB

    • TBX-52**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 13 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I

  • FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD

.SEC. XI ---

SUMMARY

EXAMINATION AREA CATGY NDE - - OUTAGE - - - - - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1i 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 006040 TCX-1-1400-33 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X-R160 905RB

    • TBX-52**

006060 TCX-1-1400-34 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - -- -X R160 905RB

    • TBX-52**

006080 TCX-1-1400-35 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - X -

RIGO 905RB

    • TBX-52**

006100 TCX-1-1400-36 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - X -

R160 905RB

    • TBX-52**

006120 TCX-1-1400-37 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X

    • SAP 102924**

006140 TCX-1-1400-38 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY RV STUD B6.30 X

    • SAP 102924**

006160 TCX-1-1400-39 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 2 - - X -

    • SAP 102924**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 14 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -

SUMMARY

EXAMINATION AREA CATGY NDE j ---------- O U T A G E------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 006180 TCX-1-1400-40 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X

    • SAP 102924*t 006200 TCX-1-1400-41 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 -- -X -

    • SAP 102924**

006220 TCX-1-1400-42 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - -- - X -

    • SAP 102924**

006240 TCX-1-1400-43 .B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 -- - X -

    • SAP 102924**

006260 TCX-1-1400-44 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - X -

    • SAP 102924**

006280 TCX-1-1400-45 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 . 30 - - X -

    • SAP 102924**

006300 TCX-1-1400-46 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30

    • SAP 102924**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 15 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE - ---------- O U T A G E -.-.------- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 006320 TCX-1-1400-47 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 -X -

    • SAP 102924**

006340 TCX-1-1400-48 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - X

    • SAP 102924**

006360 TCX-1-1400-49 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - x -

    • SAP 102924**

006380 TCX-1-140 0-50 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - X

    • SAP 102924**

006400 TCX-1-1400-51 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6 .30 2 - - - - X

    • SAP 102924**

006420 TCX-1-1400-52 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 2 - - - x

    • SAP 102924**

006440 TCX-1-1400-53 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 x -

    • SAP 102924**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 16 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL _ _ _ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -

SUMMARY

EXAMINATION AREA CATGY NDE - ---------- O U T A INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO'METH I1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 006460 TCX-1-1400-54 B-G-1 UT 82 TDLR VERIFICATION BOUNDARY.

RV STUD B6.30 - - X -

    • SAP 102924**

006600 TCX-1-1400-1 B-G-1 VT- i 82" TDLR VERIFICATION BOUNDARY.

RV NUT B06.10 2 - -X -

RIGO 905RB 006620 TCX-1-1400-2 B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - -X -

R160 905RB 006640 TCX-1-1400-3 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - - - X-R160 905RB 006660 TCX-1-1400-4 B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 - -X R160 905RB 006680 TCX-1-1400-5 B-G-1 VT-1 02 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - X RI60 905RB 006700 TCX-1-1400-6 B-G-1 VT- 1 V2 TDLR VERIFICATION BOUNDARY.

RV NUT B6 .10 2 -

R160 905RB

DATEt 01/21/08 COMANCHE PEAK UNIT 2 PAGE 17 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR F IRST SECOND THIRD ASME P ERIOD PERIOD PERIOD SEC. XI

OUTAGE--------------

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

PPAOTOB CONlANT TCX-RCPCPV- 01 REACTOR COOLANT TCX-RCPCPV-ni 006720 TCX-1-1400-7 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - x R160 905RB 006740 TCX-1-1400-8 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 -- -X -

R160 905RB 006760 TCX-I-1400-9 B-G-1 VT-1 82, TDLR VERIFICATION BOUNDARY.

RV NUT B6, 10 2 - X -

R160 905RB 006780 TCX-1-1400-10 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - - - -X -

R160 905RB 006800 TCX-1-1400-11 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 x -

R160 905RB 006820 TCX-1-1400-12 B-G-1 VT -1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 x Ri6O 905RB 006840 TCX-1-1400-13 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 x Ri60 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 18 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE ii OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 2 1 2 3 1 2 -*CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 006860 TCX-1-1400-14 B-G-1 VT- I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 - - X R160 905RB

-006880 TCX-1-1400-15 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - - x -

R160 905RB 006900 TCX-1-1400-16 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - x -

R16O 905RB 006920 TCX-1-1400-17 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - X RI60 905RB 006940 TCX-1-1400-18 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 RI60 905RB 006960 TCX-1-1400-19 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 x RIGO 905RB 006980 TCX-1-1400-20 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - x R160 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 19 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS 1

NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 **CALIBRATION BLOCK-REACTOR COOLANT TCX-RCPCRV-01 007000 TCX-1-1400-21 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2- X -

RI60 905RB 007020 TCX-1-1400-22 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - -

-X R160 90SRB 007040 TCX-1-1400-23 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - X -

R160 905RB 007060 TCX-1-1400-24 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - X -

R160 905RB 007080 TCX-1-1400-25 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 -

R160 905RB 007100 TCX-1-1400-26 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 R160 905RB 007120 TCX-1-1400-27 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 X RI60 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 20 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I---------- OUTAGE--------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 007140 TCX-I-1400-28 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - - - x -

R160 905RB 007160 TCX-I-1400-29 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - - X -

R160 905RB 007180 TCX-1-1400-30 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - X -

R160 905RB 007200 TCX-1-1400-31 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 X -

R160 905RB 007220 TCX-1-1400-32 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 x -

R160 905RB 007240 TCX-I-1400-33 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 RI60 905RB 007260 TCX-1-1400-34 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY RV NUT B6. 10 2 - X -

R160 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 21 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _ -PRESERVICE YEAR I FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE-INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1.2 3 1 2 **CALIBRATION BLOCK**

PrnrmflP r'nfl.ANT TC'Y-RCPCPV-fl1 RECO COLN TCX-RCPCR...........

007280 TCX-I-1400-35 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 X -

R160 905RB 007300 TCX-1-1400-36 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - X RI60 905RB 007320 TCX-1-1400-37 B-G-1 VT- I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - - - x -

007340 TCX-1-1400-38 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 - I X -

007360 TCX-1-1400-39 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 .10 - -X -

007380 TCX-I-1400-40 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 X -

007400 TCX-I-1400-41 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 - X,

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 22 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD i

ASME PERIOD PERIOD PERIOD SEC. XI I - -

-- I

SUMMARY

EXAMINATION AREA CATGY NDE I - U TAG E- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH Ii 2 1 . 3 1 2 -*CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 007420 TCX-I-1400-42 B-G-1 VT -1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - X 007440 TCX-I-1400-431 B-G-1 VT -1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 - -~X 007460 TCX-I-1400-44 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 -

007480 TCX-1-1400-45 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6.10 2 - -, - X -

007500 TCX-I-1400-46 B-G-1 VT-I 82 TDLR VERIFICATION. BOUNDARY.

RV NUT B6 .10 2 X 007520 TCX-I-1400-47 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6'. 10 X 007540 TCX-1-1400-48 - B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT BG. 10 X

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 23 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE II 12 U T A G E1 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 007560 TCX-1-1400-49 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 X -

007580 TCX-I-1400-50 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT BG .10 2 - - -X -

007600 TCX-I-1400-51 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 - X -

007620 TCX-i-1400-52 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2- - - X -

007640 TCX-1-1400-53 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6. 10 2 - - X -

007660 TCX-i-1400-54 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV NUT B6 . 10 2 -

007800 TCX-I-1400-1 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 Ri60 90SRB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 24 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION IN TERVAL _ _ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI ND ---------- -----------

OT G

SUMMARY

EXAMINATION AREA CATGY NDE T 0 U T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1. 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 007820 TCX-1-1400-2 B-G-i iVT-1 82 TDLR VERIFICATION BOUNDARY RV WASHER B6.50 2 - X R160 905RB 007840 TCX-1-1400-3 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2' -- -X R160 905RB 007860 TCX-1-1400-4 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - - - - X R160 905RB 007880 TCX-1-1400-5 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 X R160 905RB 007900 TCX-1-1400-6 B-G-1 VT -1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2 - X RI60 905RB 007920 TCX-I-1400-7 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 2 X -

Ri60 905RB 007940 TCX-I-1400-8 B-G-1 VT-I 82 TDLR VERIFICATION-BOUNDARY.

RV WASHER B6 .50 X RI60 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 25 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN ST ATUS PRESERVICE YEAR FIRST SECON D THIRD ASME PERIOD PERIO D PERIOD SEC. XI - -

G---- -----------

SUMMARY

EXAMINATION AREA CATGY NDE - 0 U TA G 1E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 007960 TCX-1-1400-9 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2- -- -- -X R160 905RB 007980 TCX-1-1400-10 B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.5.0 2 - X -

R160 905RB 008000 TCX-1-1400-11 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - X R160 905RB 008020 TCX-1-1400-12 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 X -

RIGO 905RB 008040 TCX-1-1400-13 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 - - X R160 905RB 008060 TCX-1-1400-14 B-G-.1 VT -1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 2-R160 905RB 008080 TCX-1-1400-15 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY RV WASHER B6. 50 2 - - X R160 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 26 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SE:COND THIRD ASME PERIOD PE]RIOD PERIOD SEC. XI A-G---

E -----------

SUMMARY

EXAMINATION AREA CATGY NOE U' -0 INSTRUCTIONS Ii NUMBER IDENTIFICATION ITEM NO METH 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 008100 TCX-1-1400-16 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 x -

R160 905RB 008120 TCX-1-1400-17 B-G-1 VT_-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 2 x -

RI60 905RB 008140 TCX-1-1400-18 B-G-1 VT- I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2 - - -x R160 905RB 008160 TCX-1-1400-19 B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - x -

R160 905RB 008180 TCX-1-1400-20 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6E.50 2 - x -

RI60 905RB 008200 TCX-1-1400-21 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 - -x -

008220 TCX-1-1400-22 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - x -

R160 905RB

)

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 27 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI ----------- ----------- ----------- I

SUMMARY

EXAMINATION AREA CATCY NDE L -------- OUTAGE--- - - - I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

nrArmnD CNNfT.ANT TCX-RCPCPV-Di REACTOR COOLANT TCX-RCPCRV-01 008240 TCX-1-1400-23 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2 - - -X R160 905RB 008260 TCX-1-1400-24 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 - -

-X R160 905RB 008280 TCX-I-1400-25 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 X Ri60 905RB 008300 TCX-I-1400-26. B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - X RiG0 905RB 008320 TCX-1-1400-27 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2 - X RIGO 905RB 008340 TCX-I-1400-28 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 -- - X-R160 905RB 008360 TCX-i-1400-29 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2 - X -

R160 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 28 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I F:IRST SECOND THIRD ASME P1ERIOD PERIOD PERIOD SEC. XI

----U-TA-G--------------

SUMMARY

EXAMINATION AREA CATGY NDE "-- 10U TAG E I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

RFACTC) rrnTAMT TrX-R(CPC*V-01 REACTOR COOLANT TCX-RCPCPV-ni 008380 TCX-1-1400-30 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - - - X -

RI60 905RB 008400 TCX-1-1400-31 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - - - - X -

R160 905RB 008420 TCX-1-1400-32 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - -- -X -

R160 905RB 008440 TCX-1-1400-33 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER BE6.50 2 X -

R160 905RB 008460 TCX-1-1400-34 B-G-1 VT- I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .56 2 -, -X -

R160 905RB 008480 TCX-1-1400-35 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2, x R160 905RB 008500 TCX-1-1400-36 B-G-I VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 x -

R160 905RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 29 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS_ _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI SCATG NDE- ------------ -------

OU AG---------------

SUMMARY

EXAMINATION AREA CATGY NDETH U T A G E INSTRUCTIONS ITEM NO METH i1 2 1 2 3 1 2 NUMBER IDENTIFICATION i **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 008520 TCX-1-1400-37 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 - -X 008540 TCX-I-1400-38 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. so 2 - X -

008560 TCX-i-ý400-39 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 - -X -

008580 TCX-I-1400-40 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 X 008600 TCX-1-1400-41 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 X -

008620 TCX-I-1400-42 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 2 X 008640 TCX-I-1400-43 B-G-1 VT-- 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 2- X -

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 30 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I F:IRST SECOND THIRD ASME P ERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION'AREA CATGY NDE I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRV-01 008660 TCX-I-1400-44 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6. 50 2 -

008680 TCX-i-1400-45 B-G-1 VT- i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 X 008700 TCX-1-1400-46 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - - -X -

008720 TCX-1-1400-47 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER 26.50 2 008740 TCX-I-1400-48 B-G-1 VT- 1 82 TDLR VERIFICATION BOUNDARY, RV WASHER B6.50 X 008760 TCX-i-1400-49 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 008780 TCX-I-1400-50 B-G-1 VT-i 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 .50 2- -- - - X -

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 31 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE ---------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK*-

nttmnn rAnfl.ANT TCX-PCPCPV-fl1 REACTOR COOLANT TCX-RCPCRV-01 008800 TCX-1-1400-51 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2 - -X -

008820 TCX-1-1400-52 B-G-1 VT-I 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 X.

008840 TCX-1-1400-53 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6.50 2- - - -X -

008860 TCX-1-1400-54 B-G-1 VT-1 82 TDLR VERIFICATION BOUNDARY.

RV WASHER B6 . 50 2 - - -X REACTOR COOLANT TCX-RCPCPR-01 009000 TCX-1-2100-1 B-B UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER LOWER HEAD TO B2. 11 SHELL WELD R161A832R2 **TBX-1**

009100 TCX-1-2100-5 B-B UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER UPPER HEAD TO B2.11 2 -C SHELL WELD RIl6A90SRB **TBX- 1**

009200 TCX-1-2100-6 B-B UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER LONG. WELD (IFT B2.12 2- X - - - -

ADJ. WELD 1)

RI61A832R0 **TBX-1**

K DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 32 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR i FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD i

SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE I 2 --- -OUTAGE - I INSTRUCTIONS NUMBER ITEM NO METH i 2 1 2 **CALIBRATION BLOCK**

IDENTIFICATION REACTOR COOLANT TCX-RCPCPR-01 009300 TCX-1-2100-9 B-B UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER LONG. WELD (1FT B2.12 2 - C ADJ. WELD 5)

R161A905RB **TBX-1**

009400 TCX-1-2100-10 B-K MT 82 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SUPPORT SKIRT WELD B10.10 2 - X - - - -

R161A832RB 009500 TCX-1-2100-11 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SURGE NOZZLE TO B3.110 2 - X - - - -

VESSEL WELD R161A832RB **TBX-1**

009550 TCX-1-2100-11IR B-D UT NA TDLR VERIFICATION BOUNDARY.

PRESSURIZER.,SURGE NOZZLE INNER B3.120 2 X - .-

RADIUS R161A832RB **TBX-58**

009600 TCX-1-2100-12 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SPRAY NOZZLE TO B3.110 2 - C VESSEL WELD R161A905RB **TBX-1**

009650 TCX-1-2100-12IR B-D UT NA TDLR VERIFICATION BOUNDARY.

PRESSURIZER SPRAY NOZZLE INNER B3.120 2 - c RADIUS R161A905RB **TBX-55**

009700 TCX-1-2100-13 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE TO B3.110 2 - C VESSEL WELD Rl6lA905RB **TBX-I**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 33 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME j PERIOD PERIOD PERIOD SEC. XI -

SUMMARY

EXAMINATION AREA CATGY NDE - ---------- O U T A G E------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCPR-01 009750 TCX-1-2100-13IR B-D UT NA TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE B3.120 EVT 2 - C REFER TO R.G. 1.147 (N-619)

INNER RADIUS RI61A905RB **TBX-59**

009800 TCX-1-2100-14 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER RELIEF NOZZLE TO B3. 110 2 - C VESSEL WELD RI61A905RB **TX- 1**

009850 TCX-1-2100-14IR B-D UT NA TDLR VERIFICATION BOUNDARY.

PRESSURIZER RELIEF NOZZLE B3.120 EVT 2 - C REFER TO R.G. 1.147 (N-619)

INNER RADIUS Ri61A905RB **TBX-59**

009900 TCX-1-2100-15 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE TO B3. 110 2 - C VESSEL WELD RI61A905RB **TBX-1**

009950 TCX-1-2100-15IR B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE B3.120 EVT 2 - C REFER TO R.G. 1.147 (N-619)

INNER RADIUS RI61A905RB **TBX-59**

010000 TCX-1-2100-16 B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE TO B3.110 2 - C VESSEL WELD RIG1A905RB **TBX-1**

.010050 TCX-1-2100-16IR B-D UT 79 TDLR VERIFICATION BOUNDARY.

PRESSURIZER SAFETY NOZZLE B3.120 EVT 2 - C REFER TO R.G. 1.147 (N-619)

INNER RADIUS R161A905RB **TBX-59**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 34 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN, STATUS _PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -'O U TAG E j INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATIOI N BLOCK**

REACTOR COOLANT TCX-RCPCPR-01 010100 TCX-1-2100-B1-16 B-G-2 VT-I 84 TDLR VERIFICATION BOUNDARY.

PRESSURIZER MANWAY BOLTING B7.20 2 - C (B1/BI6)

RIG1A905RB REACTOR COOLANT TCX-RCPCSG-01 010200 TCX-1-3100-1-I B-B UT 82 TDLR VERIFICATION BOUNDARY.

SG1 CHANNEL HEAD TO TUBESHEET B2.40 2 - X - -

WELD A23 **TBX-28**

010300 TCX-1-3100-1A B-D UT NA TDLR VERIFICATION BOUNDARY.

SG1 INLET NOZZLE INNER RADIUS EVT 2 - - - X REFER TO R.G. 1.147 (N-619)

A23

    • SG-IR**

010400 TCX-I-3100-1B B-D UT NA TDLR VERIFICATION BOUNDARY.

SGI OUTLET NOZZLE INNER RADIUS EVT 2 - X - - REFER TO R.G. 1.147 (N-619)

A23

    • SG-IR**

010500 TCX-i-3100-iB1-iG B-G-2 VT-I 84 TDLR VERIFICATION BOUNDARY.

SGl HOTLEG MANWAY BOLTING B7.30 2 - - X (I-BI/l-BI6)

A23 010600 TCX-1-3100-1B17-32 B-G-2 VT- 1 84 TDLR VERIFICATION BOUNDARY.

SGI COLDLEG MANWAY BOLTING B7.30 2 - X (1-B17/i-B32)

A23 REACTOR COOLANT TCX-RCPCSG-02 010700 TCX-1-3100-2-1 B-B UT 82 TDLR VERIFICATION BOUNDARY.

SG2 CHANNEL HEAD TO TUBESHEET B2.40 X WELD X . 1r'L, *r

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 35 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI ----------- ----------- I

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T AýG E -- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCSG-02 010800 TCX-1-3100-2A B-D UT NA TDLR VERIFICATION BOUNDARY.

SG2 INLET NOZZLE INNER RADIUS EVT 2 X REFER TO R.G. 1.147 (N-619)

R1551812RB

    • SGIR**

010900 TCX-1-3100-2B B-D UT NA TDLR VERIFICATION BOUNDARY.

SG2 OUTLET NOZZLE INNER RADIUS EVT 2 x - - - - REFER TO R.G. 1.147 (N-619)

RI551812RB

    • SGIR**

011000 TCX-1-3100-2B1-16 B-G-2 VT-1 84 TDLR VERIFICATION BOUNDARY.

SG2 HOTLEG MANWAY BOLTING B7.30 2 - x - -

(2-BI/2-B16)

R5SI1812RB 011100 TCX-1-3100-2B17-32 B-G-2 VT-i 84 TDLR VERIFICATION BOUNDARY.

SG2 COLDLEG MANWAY BOLTING B7 .30 2 X -

(2-BI7/2-B32)

R1551812RB REACTOR COOLANT TCX-RCPCSG-03 011200 TCX-1-3100-3-1 B-B UT 82 TDLR VERIFICATION BOUNDARY.

SG3 CHANNEL HEAD TO TUBESHEET B2.40 2 - - X WELD R154K827RB **TBX-28**

011300 TCX-1-3100-3A B-D UT NA TDLR VERIFICATION BOUNDARY.

SG3 INLET NOZZLE INNER RADIUS EVT 2 - - X REFER TO R.G. 1.147 (N-619)

R154K827RB

    • SG-IR**

011400 TCX-1-3100-3B B-D UT NA TDLR VERIFICATION BOUNDARY.

SG3 OUTLET NOZZLE INNER RADIUS EVT 2 - - X REFER TO R.G. 1.147 (N-619)

RI54K827RB

    • SG-IR**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 36 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCSG-03 011500 TCX-I-3100-3B1-iS B-G-2 VT-I 84 TDLR VERIFICATION BOUNDARY.

SG3 HOTLEG MANWAY BOLTING B7.30 2 - - - X (3 -B1/3 -BI6)

RI54KB27RB 011600 TCX-1-3100-3B17-32 B-G-2 VT-1 84 TDLR VERIFICATION BOUNDARY.

SG3 COLDLEG MANWAY BOLTING B7 .30 2 X (3-BI7/3-B32)

RI54K827RB REACTOR COOLANT TCX-RCPCSG-04 011700 TCX-I-3100-4-1 B-B UT 82 TDLR VERIFICATION BOUNDARY.

SG4 CHANNEL HEAD TO TUBESHEET B2.40 2 - - X WELD A29 **TBX-28**

011800 TCX-I-3100-4A B-D UT NA TDLR VERIFICATION BOUNDARY.

SG4 INLET NOZZLE INNER RADIUS EVT 2 X REFER TO R.G. 1.147 (N-619)

A29

    • SG-IR**

011900 TCX-I-3100-4B B-D UT NA TDLR VERIFICATION BOUNDARY.

SG4 OUTLET NOZZLE INNER RADIUS EVT 2 - X REFER TO R.G. 1.147 (N-619)

A29

    • SG-IR**

012000 TCX-1-3100-4B1-16 B-G-2 VT-I 84 TDLR VERIFICATION BOUNDARY.

SG4 HOTLEG MANWAY BOLTING B7 .30 X (4-BI/4-B16)

A29 012100 TCX-I-3100-4BI7-32 B-G-2 VT-I 84 TDLR VERIFICATION BOUNDARY.

SG4 COLDLEG MANWAY BOLTING B7 .30 X (4-B17/4-B32)

A29

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 37 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS t

NUMBER IDENTIFICATION ITEM NO'METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK-REACTOR COOLANT 29-RC-2-001-WEST-1 012200 TCX-1-4100-1 R-A UT 92 TDLR VERIFICATION BOUNDARY.

RPV NOZZLE TO SAFE END R1.20 2 - - -X B-F WELD.

R157 827RB

    • TBX-57,RV-6**

012300 TCX-1-4100-2 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO PIPE RI. 20 2 - - - B-J WELD.

R157 827RB

    • TBX-57,RV-6**

012500 TCX-1-4100-4 R-A UT 92 TDLR VERIFICATION BOUNDARY.

REDUCING ELBOW TO SG NOZZLE Ri. 20 2 - - X B-F WELD.

R1541827RB

    • TBX-57**

REACTOR COOLANT 31-RC-2-002-WEST-1 012600 TCX-1-4100-5 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SG NOZZLE TO ELBOW R1. 20 X B-F WELD.

RI541829RB.

    • TBX-57**

REACTOR COOLANT 27.5-RC-2-003-WEST-1 013400 TCX-1-4100-13 R-A UT TDLR VERIFICATION BOUNDARY.

ELBOW TO SAFE END R1.20 2 - B-J WELD.

R157 827RB t

    • TBX-57,RV-6*

013500 TCX-1-4100-14 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO RV NOZZLE R1. 20 2 - X - B-F WELD.

R1541827RB

    • TBX-57,RV-6**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 38 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -

OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 12-RC-2-007-2501R-1 014400 TCX-1-4101-2 R-A UT 92 B-J WELD PIPE TO ELBOW Ri. 11 2 C -

RI541823RB

    • TBX-12**

014500 TCX-1-4101-3 R-A UT 92 B-J WELD ELBOW TO PIPE Ri. 11 2 C R1541822RB

    • TBX-12**

014800 TCX-1-4101-6 R-A UT B-J WELD ELBOW TO PIPE Ri. 11 2 C R1541817RB

    • TBX-12**

BEH.ITITThT. HEAT DEMOVAT. 19-RIA-9-Ofl1 -2010-1 RESIDUAL HEAT REMOVAL 12-RH-2-001-250!R-1 015300 TCX-I-4101-11 R-A UT B-J WELD.

PIPE TO ELBOW R1. 20 2 C -

R154AB17RB

    • TBX-12**

REACTOR COOLANT IO-PC-2-021-2501R-1 015900 TCX-I-4102-4 R-A UT B-J WELD ELBOW TO PIPE RI. 20 2 -C R1541831RB

    • TBX-9, PDI-03"*

016000 TCX-I-4102-5 R-A UT 92 B-J WELD PIPE TO PIPE R1.20 2 - C RI54183iRB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 39 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

1fl-PC'-9-fl91-9Rfl1P-1 vvhCTnD COOLANT 10-RC-2-021-250IR-1 016100 TCX-1-4102-6 R-A UT 92 B-J WELD.

PIPE TO ELBOW RI. 20 2 - C R1541831RB

    • TBX-9**

REACTOR COOLANT 3-RC-2-019-2501R-1 020200 TCX-1-4105-6 R-A UT 92 B-J WELD.

PIPE TO VALVE RI.11 PT 2 C -

R1541828RB

    • PDI-03**

REACTOR COOLANT 1.5-RC-2-020-2501R-1 020900. TCX-1-4107-4 R-A PT 92 B-J WELD.

PIPE TO ELBOW RI.11 2 C -

RI541828RB 021000 TCX-1-4107-5 R-A PT 92 B-J WELD.

ELBOW TO PIPE RI.11 2 C R1541828RB REACTOR COOLANT 2-RC-2-015-2501R-1 024200 TCX-1-4109-4 R-A PT 92 B-J WELD.

PIPE TO ELBOW Ri. 11 2 X R1541813RB 024300 TCX-1-4109-5 R-A PT 92 B-J WELD.

ELBOW TO PIPE Ri. 11 2 - - - X R1541813RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 40 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR FIRST SECOND TH IRD ASME PERIOD PERIOD PE RIOD SEC. XI ----------

SUMMARY

EXAMINATION AREA CATGY NIDE 1 -OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO MIETH 1 1 2 1 2 3 1 2 I **CALIBRATIOI N BLOCK-*

CHEMICAL AND VOLUME CONTROL 1.5-CS-2-248-2501R-I 027550 TCX-I-4110-FLG 1 B-G-2 VT-i 92 FLANGE BOLTING B7.50 2 C R1541830RB REACTOR COOLANT 29-RC-2-023-WEST-I 027600 TCX-i-4200-1 R-A UT 92 TDLR VERIFICATION BOUNDARY.

RPV NOZZLE TO SAFE END R1.20 B-F WELD.

R157 827RB

    • TBX-57,RV-6**

027700 TCX-I-4200-2 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO PIPE Ri. 20 2 - - -X - B-J WELD.

R157 827RB

    • TBX-57,RV-6**

027900 TCX-i-4200-4 R-A UT 92 TDLR VERIFICATION BOUNDARY.

REDUCING ELBOW TO SG NOZZLE RI. 20 2 X B-F WELD.

R155J827RB

    • TBX-57**

REACTOR COOLANT 31-RC-2-024-WEST-I "UT 028000 TCX-I-4200-5 R-A 92 TDLR VERIFICATION BOUNDARY.

SG NOZZLE TO ELBOW Ri. 20 2 - - x - - B-F WELD.

R155JB29RB

    • TBX-57**

028300 TCX-I-4200-8 R-A UT TDLR VERIFICATION BOUNDARY.

ELBOW TO PIPE Ri. 20 2 - - B-J WELD.

R154J817RB

    • TBX-57**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 41 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD I ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - --OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 27.5-RC-2-025-WEST-1 028800 TCX-1-4200-13 R-A UT TDLR VERIFICATION BOUNDARY.

ELBOW TO SAFE END R1. 20 2 - - - - RB-J WELD.

R157 827RB

  • "TBX-57,RV-6**

028900 TCX-1-4200-14 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO RV NOZZLE RI. 20 2 - X B-F WELD.

R154J827RB

    • TBX-57,RV-6**

REACTOR COOLANT 10-RC-2-037-2501R-1 029800 TCX-1-4201-4 R-A UT B-J WELD.

ELBOW TO PIPE RI.20 2 - X RI54J831RB

    • TBX-9, PDI-03**

029900 TCX-1-4201-5 R-A UT B-J WELD.

PIPE TO ELBOW Ri. 20 2 - X RI54J831RB t

  • TBX-9, PDI-03**

030000 TCX-I-4201-6 R-A UT B-J WELD.

ELBOW TO PIPE Ri. 20 2 - x RI54J831RB

    • TBX-9, PDI-03**

REACTOR COOLANT G-RC-2-029-2501R-I 034300 TCX-I-4203-11 R-A UT 92 B-J WELD.

PIPE TO ELBOW Ri. 20 2 X RI54J831RB

    • TBX-5**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 42 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS

-OUTAGE ITEM NO METH 1 2 1 2 3 1 2 **CALIBPATION BLOCK**

NUMBER IDENTIFICATION REACTOR COOLANT 29-RC-2-040-WEST-1 040900 TCX-I-4300-1 R-A UT 92 TDLR VERIFICATION BOUNDARY.

RPV NOZZLE TO SAFE END Ri. 20 2 - - - X - B-F WELD.

R157 827RB

    • TBX-57,RV-6**

041000 TCX-1-4300-2 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO PIPE Ri. 20 2 - - - - X - B-J WELD.

R157 827RB

    • TBX-57,RV-6**

REACTOR COOLANT 31-RC-2-041-WEST-1 041600 TCX-1-4300-8 R-A UT 92 TDLR VERIFICATION BOUNDARY.

ELBOW TO PIPE RI. 20 X - B-J WELD.

R154KB17RB

    • TBX-57**

REACTOR COOLANT 27.5-RC-2-042-WEST-1 041900 TCX-1-4300-11 R-A UT 92 TDLR VERIFICATION BOUNDARY.

RC PUMP DISCHARGE NOZZLE TO R1.20 2 - - X - B-J WELD.

PIPE RI54K827RB **TBX-S7**

REACTOR COOLANT 2.75-RC-2-042-WEST-1 042100 TCX-1-4300-13 R-A UT TDLR VERIFICATION BOUNDARY.

ELBOW TO SAFE END Ri. 20 2 X - B-J WELD.

R157 827RB

    • TBX-57,RV-6**

042200 TCX-1-4300-14 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO RV NOZZLE Ri. 20 2- - - X B-F WELD.

R157 827RB

    • TBX-57,RV-6**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 43 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 10-SI-2-181-250iR-1 043600 TCX-1-4301-9 R-A UT B-J WELD.

PIPE TO ELBOW R1. 16 2 - X - -

R154K832RB

    • TBX-9 ,**

043700 TCX-1-4301-10 R-A UT B-J WELD.

ELBOW TO PIPE RI. 16 2 - - X R154KS31RB

    • TBX-9 **

REACTOR COOLANT 6-RC-2-046-2501R-1 047600 TCX-1-4303-11 R-A UT 92 B-J WELD.

PIPE TO ELBOW R1.20 2 - X -

R154K831RB

    • TBX-5**

REACTOR COOLANT 3-RC-2-052-2501R-1 048800 TCX-1-4304-4 R-A UT 92 B-J WELD.

PIPE TO ELBOW Ri. 11 2 C R154KS14RB

    • PDI-03**

CHEMICAL AND VOLUME CONTROL 3-RC-2-052-2501R-1 050800 TCX-1-4304-24 R-A UT 92 B-J WELD.

PIPE TO VALVE RI.11 2 - X - - -

R154K826RB REACTOR COOLANT 29-RC-2-058-WEST-1 059200 TCX-1-4400-1 R-A UT 92 TDLR VERIFICATION BOUNDARY.

RPV NOZZLE TO SAFE END R1. 20 2 - X - B-F WELD.

R157 827RB

    • TBX-57,RV-6**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 I PAGE: 44 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 29-RC-2-058-WEST-1 059300 TCX-1-4400-2 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO PIPE R1. 20 2 - X - B-J WELD R157 827RB

    • TBX-57,RV-6**

REACTOR COOLANT 27.5-RC-2-060-WEST-1 060400 TCX-1-4400-13 R-A UT TDLR VERIFICATION BOUNDARY.

ELBOW TO SAFE END R1.20 2 - -- -X B-J WELD.

R157 827RB

    • TBX-57,RV-6**

060500 TCX-1-4400-14 R-A UT 92 TDLR VERIFICATION BOUNDARY.

SAFE END TO RPV NOZZLE R1. 20 2 - - X - B-F WELD.

R157 827RB

    • TBX-57,RV-6**

REACTOR COOLANT 12-RC-2-069-2501R-1 061500 TCX-1-4401-2 R-A UT B-J WELD.

PIPE TO ELBOW Ri. ii 2 -C RI54L823RB

    • TBX-12, PDI-03**

061700 TCX-1-4401-4 R-A UT B-J WELD. PIPE CLAMP IN THE PIPE TO ELBOW RI. 20 2 - X WAY. REPLACES WELD.

RI54L817RB TCX-I-4101-4. REFER TO SECTION 6.0 OF THE PROGRAM PLAN.

    • TBX-12, PDI-03**

061800 TCX-1-4401-5 R-A UT B-J WELD.

ELBOW TO PIPE Ri. ii 2 - C R154L817RB

    • TBX-12, PDI-03-*

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 45 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATU S PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G - ----------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1-- U-2 -A3 -- 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 14-RC-2-135-2501R-I 075100 TCX-1-4500-2 R-A UT 92 TDLR VERIFICATION BOUNDARY.

PIPE TO PIPE R1. 11 - - X - B7J WELD.

R154L832RB

    • TBX-19**

075200 TCX-1-4500-3 R-A UT 92 TDLR VERIFICATION BOUNDARY.

PIPE TO PIPE Ri. 11 2 - - X - B-J WELD.

RI54L832RB

    • TBX- 19**

REACTOR COOLANT 6-RC-2-096-2501R-1 075600 TCX-1-4501-1 R-A UT 92 B-F WELD.

PRESSURIZER NOZZLE TO SAFE END R1.20 2 - - - X -

R161E905RB

    • DMCB-I1**

076400 TCX-1-4501'-9 R-A UT B-7 WELD.

PIPE TO ELBOW Ri. 20 2 - C RIGIE905RB

    • TBX-5 , PDI-03**

076500 TCX-1-4501-10 R-A UT B-J WELD.

ELBOW TO PIPE RI. 20 2 - C R161E905RB

    • TBX-5 , PDI-03**

076600 TCX-I-4501-11 R-A UT 92 B-J WELD.

PIPE TO VALVE (FLANGED) R1. ii 2 - C RI61E905RB

    • TBX-5**

REACTOR COOLANT 6-RC-2-108-2501R-I 078900 TCX-1-4504-1 R-A UT 92 TDLR VERIFICATION BOUNDARY.

PRESSURIZER NOZZLE TO SAFE END R1.20 - X B-F WELD.

RI6iE905RB I. PMa6 m -I t

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 46 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBPATION BLOCK**

REACTOR COOLANT 4-RC-2-087-2501R-1 083500 TCX-1-4505-19 R-A UT B-J WELD.

PIPE TO PIPE RI.11 2 - - - X RI60B913RB

    • TBX-4 , PDI-03**

REACTOR COOLANT 4-RC-2-018-2501R-i>

083700 TCX-1-4505-21 R-A UT B-J WELD.

PIPE TO PIPE Ri.20 2 - - - X - -

R161D883RB

    • TBX-4 , PDI-03**

REACTOR COOLANT 6-RC-2-163-2501R-1 083900 TCX-1-4505-23 R-A UT B-J WELD.

PIPE TO PIPE RI.20 2 - - - .X - -

RIG1D908RB

    • TBX-5 , PDI-03**

REACTOR COOLANT 4-RC-2-075-2501R-I 084600 TCX-1-4506-7 R-A UT B-J WELD.

PIPE TO REDUCER R1.20 2 - X RI61D905R5

    • TBX-4 , PDI-03**

REACTOR COOLANT 6-RC-2-161-2501R-1 084700 TCX-1-4506-8 R-A UT B-J WELD.

REDUCER TO PIPE R1.20 2 - X RI61D906RD

    • TBX-5 , PDI-03**

REACTOR COOLANT 6-RC-2-147-2501R-1 085600 TCX-1-4506-17 R-A UT B-J WELD. REPLACES WELD TEE TO PIPE Ri. 11 - - X TCX-1-4506-15.

RI60B913R] +d -i . ?OI-C2 P

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 47 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR' FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE -- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 3-SI-2-303-250IR-I 090500 TCX-1-4600-4 R-A UT B-J WELD.

PIPE TO PIPE RI. 20 2 - - x .

R154A823RB

    • PDI-03**

090600 TCX-1-4600-5 R-A UT B-J WELD.

PIPE TO ELBOW RI. 20 2 - - X RI54A823RB

    • PDI-03**

090700 TCX-1-4600-6 R-A UT B-J WELD.

ELBOW TO PIPE RI. 20 2 - - X R154A823RB

    • PDI-03**

SAFETY INJECTION 3-SI-2-033-2501R-1 090900 TCX-1-4600-8 R-A UT B-J WELD.

REDUCER TO PIPE RI.20 X Ri54D818RB

    • PDI-03**

091400 TCX-I-4600-13 R-A UT B-J WELD.

PIPE TO REDUCER RI. 20 X RI54D818RB

    • PDI-03**
  • -*T-O-*Q-9*N*D-1 SAFETY INJECTION I SI 2 - I-- I 091600 TCX-I-4600-15 R-A UT B-J WELD.

PIPE TO ELBOW Ri. 20 X RI54D822RB

    • PDI-03**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 48 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD I.

ASME PERIOD PERIOD PERIOD SEC. XI SOUTAGE--------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 i **CALIBRATION BLOCK**

SAFETY INJECTION 3-SI-2-339-2501R-I 091700 TCX-I-4600-16 R-A UT B-J WELD.

ELBOW TO PIPE Rli. 20 2 - - -- -X RI54D822RB

    • PDI-03**

REACTOR COOLANT TCX-RCPCPC-02 092400 TCX-i-5100A-2SB1-12 B-G-2 VT-I 92 TDLR VERIFICATION BOUNDARY.

RC PUMP 2 #1 SEAL BOLTING B7.60 -- -X -

(2-BI/2-B12) 092900 TCX-i-5100A-2FBI-24 B-G-1 UT 92 TDLR VERIFICATION BOUNDARY.

RC PUMP 2 MAIN FLNG BLT B6.180 2 - - - X (2-BI/2-B24)

    • TBX-54**

093000 TCX-I-510OA-2FLG B-G-1 VT-I 92 TDLR VERIFICATION BOUNDARY.

RC PUMP 2 MAIN FLANGE SURFACE B6.190 2 EXAM TO BE DONE WHEN PUMP IS DISASSEMBLED.

094000 TCX-1-510OC-2CASING B-L-2 VT-3 92 TDLR VERIFICATION BOUNDARY.

RC PUMP 2 CASING - INTERNAL B312.20 X SURFACES 094050 TCX-1-5100C-2-1 B-L-1 VT-I 92 TDLR VERIFICATION BOUNDARY.

RC PUMP 2 CASING WELD B12.10 IC SEE R.G. 1.147 (N-619)

RESIDUAL HEAT REMOVAL 12-RH-2-001-2501R-I 094221 TCX-i-4101-8701A-BLT B-G-2 VT-I 92 DWG. 8372D46 VALVE BODY BOLTING 2-8701A B7.70 2 X RI54A808RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 49 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G E 2----- INSTRUCTIONS 1--UTAG--

2 3 NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 10-SI-2-182-2501R-i 094244 TCX-1-4402-8956D-BLT B-G-2 VT- 1 92 DWG. 8372D14 VALVE BODY BOLTING 2-8956D B7 . 70 2 C -

RI54L819RB SAFETY INJECTION 6-SI-2-092-2501R-1 094245 TCX-1-4403-8818D-BLT B-G-2 VT- i 92 DWG. 8372D12 VALVE BODY BOLTING 2-8818D B7.70 2 - - - X REACTOR COOLANT 6-RC-2-096-2501R-l 094249 TCX-1-4501-8010A-BLT B-G-2 VT-1 92 DWG. DS-C-66075 VALVE BODY BOLTING 2-8010A B7.70 2 C -

R161A905RB RESIDUAL HEAT REMOVAL 12- RH-2-001-2501R-1 094261 TCX-1-4101-8701A-INT B-M-2 VT-3 NA DWG. 8372D46. EXAM TO BE VALVE INTERNAL SURFACES B12 .50 2 - X CONDUCTED WHEN VALVE IS R154A817RB DISASSEMBLED.

SAFETY INJECTION 10-SI-2-182-2501R-1 094279 TCX-i-4402-8956D-INT B-M-2 VT-3 DWG. 8372D14 VALVE INTERNAL SURFACES B12 .50 2 - X - -

SAFETY INJECTION 6-SI-2-092-2501R-I 094280 TCX-1-4403-8818D-INT B-M-2 VT-3 NA DWG. 8372D12 VALVE INTERNAL SURFACES B12. 50 2 -

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 50 INSERVICE INSPECTION PLAN CLASS I SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 1i OUTAGE G E - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 6-RC-2-096-2501R-1 094282 TCX-1-4501-801UA-INT B-M-2 VT-3 NA DWG. DS-C-66075 VALVE INTERNAL SURFACES B12 .50 2 C -

RI61A905RB

4.2 CLASS 2 NDE This subsection describes the examination areas and NDE methods for the Class 2 pressure retaining components and associated component integral welded attachments as specified in Article TWC of the Code. For pressure testing, see Section 5.

Class 2 valve body welds have been grouped according to design, size, function, and service in a system in accordance with Table TWC-2500-1, Category C-G, Note I of the Code. These groups are delineated below. One valve from each group has been selected for examination as denoted by the asterisk "*".

Group 1 - 8" Forged Gate Valves, MS Safety Isolation 2MS-026 2MS-063 2MS-098 * (reference TCX-2-2300 for location) 2MS-134 Group 2 - 18" Forged Gate Valves, Main Feedwater Isolation 2FW-071 2FW-077 * (reference TCX-2-2202 for location) 2FW-083 2FW-089 Group 3 - 6" Forged Check Valves, Feedwater 2FW-191 2FW-192 2FW- 193 * (reference TCX-2-2204 for location) 2FW- 194 2FW- 195 2FW-]196 2FW-197 2FW- 198 2FW-199 2FW-200 2FW-201 2FW-202 4.2 Page 1 of 2

Group 4 - 6" Forged Gate Valves, Auxiliary Feedwater Isolation 2FW-203 * (reference TCX 2403 for location) 2FW-204

.2FW-205 2FW-206 Group 5 - 12" Forged Gate Valves, Containment Spray Isolation 2CT-0026 2CT-0028 * (reference TCX 2578 for location) 2CT-0078 2CT-0084 Group 6 - 12" Forged Gate Valve, Safety Injection 2SI-0048 * (reference TCX-2-2582 for location) 4.2 Page 2 of 2

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 51 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRS T SECOND THIRD ASME PERITOD PERIOD PERIOD SEC. XI -

T-G---- -----------

SUMMARY

EXAMINATION AREA CATGY NDE - - 0 U T A G E 1 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

MAIN STEAM TCX-RCPCSG-03 094300 TCX-2-1100-3-2 C-A UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 TUBESHEET TO SHELL WELD C1.30 2 C - REFER TO R.G. 1.147 (N-435-1)

R155J832RB FOR SURFACE EXAMINATION ALTERNATIVE.

    • TBX-27**

094400 TCX-2-1100-3-3 C-A UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 LOWER SHELL CIRC. WELD Cl. 10 2 C - REFER TO R.G. 1.147 (N-435-1)

RISSJ832RB FOR SURFACE EXAMINATION ALTERNATIVE

    • TBX-27**.

094500 TCX-2-1100-3-5 C-A UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 TRANSITION CONE TO LOWER CI.10 2 - - - - X REFER TO R.G. 1.147 (N-435-1)

SHELL WELD FOR SURFACE EXAMINATION ALTERNATIVE.

    • TBX-27**

094600 TCX-2-1100-3-6 C-A UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 UPPER SHELL TO TRANSITION C1.10 2 - X REFER TO R.G. 1.147 (N-435-1)

CONE WELD FOR SURFACE EXAMINATION ALTERNATIVE.

    • TBX-27**

094700 TCX-2-1100-3-8 C-A UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 HEAD TO SHELL WELD Cl. 20 2 - - - -x REFER TO R.G. 1.147 (N-435-1)

FOR SURFACE EXAMINATION ALTERNATIVE.

    • TBX-27**

094800 TCX-2-1100-3-9 C-B UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 FEEDWATER NOZZLE TO C2.21 MT 2 C VESSEL WELD R155J832RB **TBX-27**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 52 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI Il --

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE S INSTRUCTIONS ITEM NO METH 1 2 12 3 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION MAIN STEAM TCX-RCPCSG-03 094900 TCX-2-1100-3-91R C-B UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 FEEDWATER NOZZLE INNER C2 .22 2 C RADIUS RI55J832RB **TBX-56**

095000 TCX-2-1100-3-10 C-B UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 AUX FEEDWATER NOZZLE TO C2.21 MT 2 - - -- -X VESSEL WELD

    • TBX-27**

095100 TCX-2-1100-3-11 C-B UT 92 TDLR VERIFICATION BOUNDARY.

SG 3 MAIN STEAM NOZZLE TO C2.21 MT 2 - - - -X VESSEL WELD

    • TBX-27*t CHEMICAL AND VOLUME CONTROL TCX-CSAHEL-01 095300 TCX-2-1110-1 C-A UT 92 TDLR VERIFICATION BOUNDARY.

EXCESS LETDOWN HX HEAD TO C1.20 2 C REFER TO R.G. 1.147 (N-435-1)

FLANGE WELD FOR SURFACE EXAMINATION R154E808RB ALTERNATIVE.

    • TBX-8**

RESIDUAL HEAT REMOVAL TCX-RHAHRS-01 095600 TCX-2-1120-1-1 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

RHR HX1 HEAD TO SHELL WELD C1.20 2 X FOR SURFACE EXAMINATION ALTERNATIVE.

t

  • TBX-30D*

095700 TCX-2-1120-1-2 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

RHR HX1 SHELL TO FLANGE WELD Cl.10 FOR SURFACE EXAMINATION ALTERNATIVE.

    • TBX-30t*

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 53 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL TCX-RHAHRS-01 095800 TCX-2-1120-1-3 C-B UT 92 RHR HX1 INLET NOZZLE TO SHELL C2.21 PT 2 - X WELD

    • TBX-51**

096000 TCX-2-1120-1-4 C-B UT 92 RHR HX1 OUTLET NOZZLE TO SHELL C2.21 PT 2 - - X WELD

    • TBX-51**

096200 TCX-2-1120-1-1WS C-C PT 92 RHR HX1 WELDED SUPPORT C3 . 10 X 790SB 096300 TCX-2-1120-1-2WS C-C PT 92 RHR HXI WELDED SUPPORT C3.10 X 790SB CHEMICAL AND VOLUME CONTROL TCX-CSAHLD-01 096400 TCX-2-1130-1 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

HORIZONTAL LETDOWN HX HEAD TO C1.20 2 - C FOR SURFACE EXAMINATION FLANGE WLD ALTERNATIVE.

R81 811SB **TBX-31**

CHEMICAL AND VOLUME CONTROL TCX-TRAHLR-01 096500 TCX-2-1140-1 C-A PT 92 PT IN LIEU OF UT PER CODE CASE LETDOWN REHEAT HX HEAD TO Cl. 20 N-435-1.

SHELL WELD 833SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 54 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR lI FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE I -

2

--- -OU AG------ -----------

0 U T A G E 12 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH Ii 2 1 2 3 1 2 **CALIBRATION BLOCK**

CHEMICAL AND VOLUME CONTROL TCX-TRAHLR-01 096600 TCX-2-1140-2 C-A PT 92 PT IN LIEU OF UT PER CODE CASE LETDOWN REHEAT HX SHELL TO CI.10 2 - X - - N-435-1.

FLANGE WELD 833SB CHEMICAL AND VOLUME CONTROL TCX-CSAHRG-01 096700 TCX-2-1150-1 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX HEAD TO TEE Cl. 20 2 - X FOR SURFACE EXAMINATION WELD ALTERNATIVE.

R155C833RB **TBX-9**

096800 TCX-2-1150-2 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX HEAD TO TEE C1.20 2 X - FOR SURFACE EXAMINATION WELD ALTERNATIVE.

RI55C833RB **TBX-9**

096900 TCX-2-1150-3 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX SHELL TO TEE Cl. 10 2 - X FOR SURFACE EXAMINATION WELD ALTERNATIVE.

R155C833RB **TBX-B**

097000 TCX-2-1150-4 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX SHELL TO TEE CI. 10 2 FOR SURFACE EXAMINATION WELD ALTERNATIVE.

R155C833RB **TBX-8**

097100 TCX-2-1150-5 C-A UT 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX SHELL TO Cl. 30 X - FOR SURFACE EXAMINATION TUBESHEET WELD ALTERNATIVE.

Ri55C833RB **TBX-8**

097200 TCX-2-.1150-6 C-A UT. 92 REFER TO R.G. 1.147 (N-435-1)

REGENERATIVE HX SHELL TO Cl. 30 2 - X FOR SURFACE EXAMINATION TUBESHEET WELD ALTERNATIVE.

R155C833RB **TBX-8**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 55 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD, PERIOD PERIOD SEC. XI - -~I OUTAGE-- -----------

SUMMARY

EXAMINATION AREA CATGY NDE - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CONTAINMENT SPRAY CP2-CTAHCS-01 097410 TCX-2-1180-1-1 C-A UT 92 CT HX1 HEAT TO SHELL WELD C1.20 2 - X

    • TBX-31**

097420 TCX-2-1180-1-2 C-A UT 92 CT HX1 SHELL TO FLANGE WELD CI.10 2 - X - -

    • TBX-31**

097430 TCX-2-11B0-1-3 C-B UT 92 CT HX1 INLET NOZZLE TO SHELL C2.21 PT 2 - X -

WELD

    • TBX-15,SSCB-1**

097444 TCX-2-11BO-1-4 C-B UT 92 CT HX1 OUTLET NOZZLE TO SHELL C2.21 PT 2 - - X - - -

WELD

    • TBX-15,SSCB-1**

CONTAINMENT SPRAY TCX-CTAHCS-01 097450 TCX-2-1180-1-1WS C-C' PT 92 CT HX1 WELD SUPPORT C3 . 10 2 X -

097460 TCX-2-1180-1-2WS C-C PT 92 CT HXl WELDED SUPPORT C3.10 - X -

FEEDWATER 6-FW-2-095-1303-2 108500 TCX-2-2103-10 R-A UT C-F-2 WELD.

PIPE TO PIPE RI. 20 2 RIO0BS64SB

  • ' TL;X -3 ý_) POý - c Z, ' 0

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 56 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERRIOD PERIOD PERI O-SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE 0 U - - - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-095-41303-2 108600 TCX-2-2103-11 R-A UT C-F-2 WELD.

ELBOW TO PIPE R1. 20 2 - - x - -

R100B864SB

    • TBX-35, PDI-02*

108700 TCX-2-2103-12 R-A UT C-F-2 WELD.

PIPE TO ELBOW RI. 20 2 - - - X - -

RIO0B864SB

    • TBX-35, PDI-02"*

FEEDWATER i6-FW-2-074-1303-2 115400 TCX-2-2201-1 R-A UT NA TDLR VERIFICATION BOUNDARY.

NOZZLE TO REDUCING ELBOW Ri . 11 2 X - - - - C-F-2 WELD.

R155I841RB

    • TBX-20**

FEEDWATER 6-FW-2-096-1303-2 124200 TCX-2-2204-24 R-A UT C-F-2 WELD.

PIPE TO ELBOW Ri. 20 2 - - X Ri00D864SB

    • TBX-35, PDI-02**

124300 TCX-2-2204-25 R-A UT C-F-2 WELD.

ELBOW TO PIPE Ri.20 - X RI0OD864SB

    • TBX-35, PDI-02**

124400 TCX-2-2204-26 R-A UT C-F-2 WELD.

PIPE TO PIPE RI. 20 2 - X - -

RI00D864SB

    • TBX-35, PDI-02**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 57 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI i

SUMMARY

EXAMINATION AREA CATGY NDE - U T A0-- ------------ INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 12 1 23 1 2 **CALIBRATION BLOCK-FEEDWATER 6-FW-2-097-1303-2 141000 TCX-2-2303-25 R-A UT 92 TDLR VERIFICATION BOUNDARY.

PIPE TO EBLOW Ri. 20 2 - X - C-F-2 WELD.

Ri0OC864SB

    • TBX-35, PDI-02"*

141100 TCX-2-2303-26 R-A UT C-F-2 WELD.

ELBOW TO PIPE R1.20 2 - - X -

R10O0C864SB

    • TBX-35, PDI-02**

141200 TCX-2-2303-27 R-A UT C-F-2 WELD.

PIPE TO PIPE Ri. 20 2 X - - -

R100C864SB

    • TBX-35, PDI-02**

FEEDWATER 6-FW-2-098-1303-2 156800 TCX-2-2403-23 R-A UT C-F-2 WELD.

ELBOW TO PIPE Ri. 20 2 - C R100AB84SB

    • TBX-35, PDI-02**

156900 TCX-2-2403-24 R-A UT 92 TDLR VERIFICATION BOUNDARY.

PIPE TO ELBOW Ri. 20 2 - C C-F-2 WELD.

RI0OA864SB

    • TBX-35, PDI-02**

r-157000 TCX-2-2403-25 R-A UT C-F-2 WELD.

ELBOW TO PIPE RI.20 C RIOOAB64SB

    • TBX-35, PDI-02**

RESIDUAL HEAT REMOVAL 12-RH-2-003-601R-2 158100 TCX-2-2500-2 R-A UT C-F-I WELD.

PIPE TO PIPE RI.20 2 - C R154AB17RB rV Kt-, P01; 4-cf

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 58 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATIOIN BLOCK**

RESIDUAL HEAT REMOVAL 12-RH-2-003-601R-2 158500 TCX-2-2500-6 R-A UT C-F-1 WELD.

PIPE TO ELBOW RI. 20 2 - C R77B 817SB

    • TBX-1I**

158600 TCX-2-2500-7 R-A UT C-F-i WELD..

ELBOW TO PIPE Ri. 20 2 - C R77B 816SB

    • TBX-II**

RESIDUAL HEAT REMOVAL 16-RH-2-007-601R-2 160900 TCX-2-2500-30 R-A UT C-F-i WELD.

PIPE TO REDUCING ELBOW RI. 20 2 - C R53 775SB

    • TBX- 15*

SAFETY INJECTION 16-SI-2-076-601R-2 162000 TCX-2-2500-41 R-A UT RC-F-I WELD.

PIPE TO ELBOW RI. 20 2 - C R65 803SB

    • TBX- 15*

RESIDUAL HEAT REMOVAL 12-RH-2-004-601R-2 162800 TCX-2-2501-6 R-A UT C-F-I WELD.

PIPE TO ELBOW Ri. 20 2 - C R77A 817SB

    • TBX-II**

162900 TCX-2-2501-7. R-A UT C-F-I WELD.

ELBOW TO PIPE RI. 20 2 - C R77A 816SB

    • TBX-II**

DAT13: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 59 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI I---------- OUTA

SUMMARY

EXAMINATION AREA CATGY NDE G E------ INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL 16-RH-2-008-G6IR-2 165700 TCX-2-2501-35 R-A UT C-F-I WELD.

PIPE TO REDUCING ELBOW RI. 20 2 - C R52 775SB

    • TBX-15**

SAFETY INJECTION 16-SI-2-075-601R-2 166900 TCX-2-2501-47 R-A UT C-F-I WELD.

PIPE TO PIPE Ri. 20 2 - C R63 798SB

    • TBX-15**

167000 TCX-2-2501-48 R-A UT C-F-I WELD.

PIPE TO ELBOW R1. 20 2 - C R63 803SB

    • TBX-15**

RESIDUAL HEAT REMOVAL 10-RH-2-015-601R-2 167900 TCX-2-2520-5 R-A UT C-F-I WELD.

ELBOW TO PIPE Ri. 20 2 R67 796SB RESIDUAL HEAT REMOVAL 12-RH-2-033-601R-2 169000 TCX-2-2520-18 R-A . UT C-F-i WELD.

PIPE TO REDUCING ELBOW RI. 20 2 X R69 797SB

    • TBX-II,**

RESIDUAL HEAT REMOVAL 8-RH-2-063-601R-2 172200 TCX-2-2520-50 R-A UT C-F-I WELD.

PIPE TO ELBOW RI . 20 2 - - X R54 780SB

    • TBX-42,**

DAýTE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 60 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI I OUTAGE-------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2-- **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL 8-RH-2-003-601R-2 172300 TCX-2-2520-51 R-A UT C-F-1 WELD.

ELBOW TO PIPE R1.20 2 - - X R54 780SB

    • TBX- 42, **

172400 TCX-2-2520-52 R-A UT C-F-1 WELD.

PIPE TO ELBOW Rl. 20 X R54 780SB

    • TBX..42, **

172500 TCX-2-2520-53 R-A UT C-F-I WELD.

ELBOW TO PIPE F1.20 2 - - - - X R54 780SB

    • TBX-42, **

172800 TCX-2-2520-56 R-A UT C-F-I WELD.

PIPE TO ELBOW R1. 20 2 - - - X R54 780SB

    • TBX-42**

RESIDUAL HEAT REMOVAL 10-RB-2-016-601R-2 173600 TCX-2-2521-4 R-A UT C-F-I WELD.

REDUCING ELBOW TO PIPE R1. 20 2 X R68 797SB 173700 TCX-2-2521-5 R-A UT C-F-I WELD.

PIPE TO PIPE R1. 20 2 - X R68 797SB RESIDUAL HEAT REMOVAL 12-RH-2-034-601R-2 175100 TCX-2-2521-19' R-A UT C-F-1 WELD.

PIPE TO REDUCING ELBOW RI. 20 X R68 797SB T..,. - ii .

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 61 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI SCAT. MOE- ----------- --------

OU AG--------------

SUMMARY

EXAMINATION AREA CATGY NDE 12 T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK--

RESIDUAL HEAT REMOVAL 8-RH-2-064-601R-2 178200 TCX-2-2521-50 R-A UT C-F-1 WELD.

PIPE TO ELBOW RI. 20 2 - X - - -

R51 781SB 178300 TCX-2-2521-51 R-A UT C-F-I WELD.

ELBOW TO PIPE Ri. 20 2 - X R51 781SB 178400 TCX-2-2521-52 R-A UT C-F-1 WELD.

PIPE TO ELBOW Ri. 20 2 - X R51 781SB 178500 TCX-2-2521-53 R-A UT C-F-i WELD.

ELBOW TO PIPE Ri. 20 2 - - X - -

R51 781SB SAFETY INJECTION 10-SI-2-095-2501R-2 183900 TCX-2-2530-33 R-A UT C-F-1 WELD.

PIPE TO ELBOW R1.20 2 C -

R77B 812SB

    • TBX-9, PDI-04**

184000 TCX-2-2530-34 R-A UT 92 C-F-I WELD.

ELBOW TO PIPE R1.20 2 C -

R77B 813SB

    • TBX-9, PDI-04**

184500 TCX-2-2530-39 R-A UT 92 C-F-I WELD.

PIPE TO ELBOW R1.20 2 C R77B 823SB

    • TBX-9, PDI-04**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 62

  • INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS - PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI E------------------ -ISRCTOS

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G E *-INSTRUCTIONS B NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 **CALIBRATION BLOCK--

SAFETY INJECTION 10-SI-2-079-601R-2 186100 TCX-2-2531-14 R-A UT C-F-i WELD.

ELBOW TO PIPE RI. 20 2 C -

R77A 820SB

    • TBX-10, PDI-03**

RESIDUAL HEAT REMOVAL 10-RH-2-025-601R-2 187000 TCX-2-2532-5 R-A UT C-F-I WELD.

ELBOW TO PIPE RI. 20 2 - X -

R62F 789SB SAFETY INJECTION 10-SI-2-078-601R-2 188300 TCX-2-2532-18 R-A UT C-F-I WELD.

PIPE TO ELBOW RI. 20 - X R77B 820SB

    • TBX-10**

188400 TCX-2-2532-19 R-A UT C-F-I WELD.

ELBOW TO PIPE Rl .20 2 - - X -

R77B 820SB

    • TBX-10**

RESIDUAL HEAT REMOVAL 8-RH-2-027-601R-2 190100 TCX-2-2532-36 R-A UT C-F-i WELD.

PIPE TO ELBOW Ri. 20 2 - - X R62F 797SB 190200 TCX-2-2532-37 R-A UT C-F-I WELD.

ELBOW TO PIPE Ri. 20 2 - X -

R62F 797SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 63 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD Ii ASME I PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NOE O U TA G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH i 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL 8-RH-2-027-601R-2 190300 TCX-2-2532-38 R-A UT C-F-I WELD.

PIPE TO ELBOW Rl. 20 2 X R62F 797SB SAFETY INJECTION 10-SI-2-083-2501R-2 192200 TCX-2-2534-1 R-A UT 92 C-F-I WELD.

PIPE TO PIPE (PENETRATION) Ri. 20 2 .- C RI54D821RB

    • TBX-09, PDI-03**

192300 TCX-2-2534-2 R-A UT 92 C-F-I WELD.

PIPE TO TEE Ri. 20 2 - C RI54DB21RB

    • TBX-09, PDI-03**

SAFETY INJECTION 8-SI-2-088-250IR-2 192900 TCX-2-2534-8 R-A UT 92 C-F-I WELD.

PIPE TO ELBOW RI. 20 2 - C -

RI54D817RB

    • TBX-18, PDI-03**

193000 TCX-2-2534-9 R-A UT 92 C-F-i WELD.

ELBOW TO PIPE Ri.20 2 - C RI54D817RB

    • TBX-18, PDI-03**

CONTAINMENT SPRAY 16-CT-2-002-151R-2 197200 TCX-2-2536-8 R-A UT C-F-I WELD.

ELBOW TO PIPE RI.20 2 R63 803SB

    • TBX-48,**

DATE: .01/21/08 COMANCHE PEAK UNIT 2 PAGE: 64 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME

  • PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -1OUTAGE INSTRUCTIONS ITEM NO METH 1 2' 1 23 1 2 **CALIBRATION BLOCK--

NUMBER IDENTIFICATION CONTAINMENT SPRAY 16-CT-2-001-151R-2 1981IQ0 TCX-2-2537-7 R-A UT C-F-I WELD.

ELBOW TO PIPE Ri. 20 2 - - -- -X R6B 803SB

    • TBX-48,**

SAFETY INJECTION 6-SI-2-038-151R-2 215200 TCX-2-2541-8 R-A UT C-F-I WELD.

ELBOW TO PIPE Ri. 20 2 X R62 775SB 215300 'TCX-2-2541-9 R-A UT C-F-i WELD.

PIPE TO ELBOW RI. 20 2.- - - - - -X R62 786SB 215400 TCX-2-2541-10 R-A UT C-F-i WELD ELBOW TO PIPE RI. 20 2 - - - - X R62 786SB 215500 TCX-2-2541-11 R-A UT C-F-I WELD PIPE TO PIPE RI.20 X R62 786SB SAFETY INJECTION 6-SI-2-041-151R-2 216600 TCX-2-2541-22 R-A UT C-F-I WELD.

PIPE TO TEE.- Ri. 20 2 - - X R62F 789SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 65 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRI ASME PERIOD PERIOD PERI( )D SEC. XI

- ---- TA- -- ----

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I -- CALIBRATION BLOCK**

SAFETY INJECTION 6-SI-2-041-151R-2 216700 TCX-2-2541-23 R-A UT C-F-I WELD.

TEE TO PIPE Ri. 20 2 -

R62F 789SB SAFETY INJECTION 6-SI-2-311-i5lR-2 217000 TCX-2-2541-26 R-A UT C-F-I WELD.

PIPE TO ELBOW Ri. 20 "2 - X R62F 789SB 217100 TCX-2-2541-27 R-A UT C-F-I WELD.

ELBOW TO PIPE RI.20 2 - X R62F 789SB SAFETY INJECTTON A-NT-2-070-lqiR-2 221500 TCX-2-2542-9 R-A UT C-F-I WELD.

'ELBOW TO PIPE Ri. 20 2 X - -

REQ 775SB 221600 TCX-2-2542-10 R-A UT C-F-i WELD.

PIPE TO FLANGE. Ri. 20 2 X REQ 778SB 221700 TCX-2-2542-11 R-A UT C-F-I WELD.

FLANGE TO PIPE R1. 20 X REQ 786GSB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 66 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G E .INSTRUCTIONS NUM1BER IDENTIFICATION ITEM NO METH I 1 .2 1 2 3 12 **CALIBRATION BLOCK**

SAFETY INJECTION 6-SI-2-070-151R-2 221800 TCX-2-2542-12 R-A UT C-F-I WELD.

PIPE TO ELBOW RI. 20 2 - X -

R60 786SB 221900 TCX-2-2542-13 R-A UT C-F-I WELD.

ELBOW TO PIPE RI. 20 2 - X -

R60 786SB SAFETY INJECTION 14-SI-2-071-60IR-2 304000 TCX-2-2581-7 R-A UT 92 C-F-I WELD. REPLACES WELD ELBOW TO PIPE R1.20 2 X I TCX-2-2581-6. REFER TO SECTION R70 793SB 6,0 OF THE ISI PROGRAM PLAN.

    • TBX-47, PDI-03**

SAFETY INJECTION 14-SI-2-072-601R-2 305800 TCX-2-2581-25 R-A UT C-F-I WELD.

PIPE TO ELBOW Ri. 20 2 - X R70 793SB

    • TBX-47, PDI-03**

AUXILIARY FEEDWATER 4-AF-2-019-1303-2 312929 AF-2-SB-062A-10 R-A UT 83 C-F-2 WELD.

ELBOW TO PIPE Ri. 20 - - X R100D86iSB

    • PDI-02**

312937 AF-2-SB-062A-FW9 R-A *UT 83 C-F-2 WELD.

PIPE TO ELBOW RI.20 2 - X RI0OD861SB

    • PDI-02**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 67 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 4-AF-2-021-2003-2 312947 AF-2-SB-061-6 R-A UT 83 C-F-2 WELD.

PIPE TO ELBOW Ri. 20 2 - - - - X RI0OB854SB

    • PDI-02**

312948 AF-2-SB-061-7 R-A UT 83 C-F-2 WELD.

ELBOW TO PIPE Ri.20 2 - - - X R100BB54SB

    • PDI-02**

AUXILIARY FEEDWATER 4-AF-2-022-2003-2 312951 AF-2-SB-060-11A R-A UT 83 C-F-2 WELD.

PIPE TO ELBOW Ri. 20 2 X - - -

R100C860SB

    • PDI-02**

312952 AF-2-SB-060-12 R-A UT 83 C-F-2 WELD.

ELBOW TO PIPE Ri. 20 2 X -

R100C860SB

    • PDI-02**

AUXILIARY FEEDWATER 4-AF-2-024-2003-2 312960 AF-2-SB-052-23 R-A UT 83 C-F-2 WELD.

PIPE TO ELBOW Ri.20 2 - C RI00A854SB

    • PDI-02**

312961 AF-2-SB-052-24A R-A . UT 83 C-F-2 WELD.

ELBOW TO PIPE RI.20 2 - C RIb0A854SB

    • PDI-02**

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 68 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS - -PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD .PERIOD SEC. XI O----------OUTAGE

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 4-AF-2-054-2003-2 312976 AF-2-SB-062A-8 R-A UT 83 C-F-2 WELD.

TEE TO PIPE R1.20 2 - - X RI0OD861SB

    • PDI-02**

RESIDUAL HEAT REMOVAL TCX-RHAPRH-01 313000 TCX-2-3100-1WS C-C PT 92 RHR PUMP 01 WELDED SUPPORT C3 . 10 2 - C 313100 TCX-2-3100-2WS C-C PT 92 RHR PUMP 01 WELDED SUPPORT C3. 10 2 - C 313200 TCX-2-3100-3WS C-C PT 92 RHR PUMP 01 WELDED SUPPORT C3. 10 2 - C CHEMICAL AND VOLUME CONTROL TCX-CSAPCH-01 313300 TCX-2-3110-1WS C-C PT 92 CHG PUMP 01 WELDED SUPPORT C3 . 10 - - - x 313400 TCX-2-3110-2WS C-C PT 92 CHG PUMP 01 WELDED SUPPORT C3.10 X -

DATEý 01/21/08 COMANCHE PEAK UNIT 2 PAGE 69 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PL AN STATUS _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI UTA------- ----------- I NSRCOS

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G E - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 1 **CALIBRATIO! N BLOCK**

CHEMICAL AND VOLUME CONTROL TCX-CSAPCH-01 313500 TCX-2-3110-3WS C-C PT 92 CHG PUMP 01 WELDED SUPPORT C3.10 2 - - - X -

313600 TCX-2-3110-4WS C-C PT 92 CHG PUMP 01 WELDED SUPPORT C3 .10 2 X -

SAFETY INJECTION TCX-SIAPSI-02 314000 TCX-2-3140-2BI-32 C-D UT 92 EXAMINE IN 2ND INTERVAL SI B1 THRU B32 SI PUMP 02 STUDS C4.30 2 - C PUMP, TSN 431907, S/N 51928.

    • TBX-53**

FEEDWATER 18-FW-2-035-2003-2 500700 TCX-2-2202-FW077 C-G MT 92 TDLR VERIFICATION BOUNDARY.

VALVE BODY WELD 2FW-0077 (ALT C6.20 2 C - REFER TO R.G.1.147 (N-617).

2-HV-2135) DWG. 75830 R100A856SB FEEDWATER 6-FW-2-092-2003-2 501000 TCX-2-2204-FW193 C-G MT 92 DWG. 454KAB1-001. REFER TO VALVE BODY WELD 2FW-0193 CG .20 2 - C R.G.1.147 (N-617).

R100C863SB MAIN STEAM 8-MS-2-223-1303-2 501200 TCX-2-2300-MS098 C-G MT 92 TDLR VERIFICATION BOUNDARY.

VALVE BODY WELD 2MS-0098 C6 . 20 X - DWG. 75730-1. REFER TO R.G.1.147 (N-617)

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 70 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE-INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK-FEEDWATER 6-FW-2-094-2003-2 502300 TCX-2-2403-FW203 C-G MT 92 DWG. 435KAB2-002. REFER TO VALVE BODY WELD 2FW-0203 C6.20 2 - - X - R.G.1.147 (N-617).

CONTAINMENT SPRAY 12-CT-2-006-151R-2 502400 TCX-2-257B-CT028 C-G PT 92 D0G. 75780. REFER TO R.G.

VALVE BODY WELD 2CT-0028 C6.20 2 - X 1.147 (N-617).

CONTAINMENT SPRAY 12-SI-2-031-151R-2 N

502600 TCX-2-2582-SI048 C-G PT 92 DWG. 75780-1. REFER TO R.G.

VALVE BODY WELD 2SI-0048 C6 .20 2- - - 1.147 (N-617).

4.3 COMPONENT SUPPORTS This subsection describes the examination areas and requirements for the Class 1, 2 and 3 component supports and Class 3 Integral Welded Attachments as specified in Article IWF and IWD of the Code, respectively. For pressure testing of Class 3 components, see Section 5.

In lieu of the requirements of Technical Specifications relating to snubbers, specifically those ISI requirements (e.g., plans, schedules, reports, inspector involvement, and Code Data Reports) of ASME Section XI, snubbers shall be demonstrated operable by performance of the augmented inservice inspection program as described in the ASME OM Code, Subsection ISTD. '

4.3 PageI ofI

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 71 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE I 2OUTAGE -. INSTRUCTIONS NUMBER ITEM NO METH I 1 2 1 23 **CALIBRATION BLOCK**

IDENTIFICATION 1 2 CHEMICAL & VOLUME CONTROL 3-CS-2-080-2501R-1 600000 TCX-1-4105-Hl F-A VT-3 NA SPRING CS-2-080-401-C41S F1.10 2 C RI541B29RB CHEMICAL & VOLUME CONTROL 3-CS-2-235-2501R-1 600300 TCX-1-4304-H23 F-A VT-3 NA STRUT CS-2-235-467-C41R F1.10 2 - - - - X 826RB CHEMICAL & VOLUME CONTROL 2-CS-2-105-2501R-1 600400 TCX-1-4207-Hl F-A VT-3 NA STRUT CS-2-RB-002-704-1 Fl. 10 2 - X R154B826RB CHEMICAL & VOLUME CONTROL 2-CS-2-112-2501R-1 600900 TCX-1-4507-H16 F-A VT- 3 NA SPRING CS-2-RB-021-701-1 Fl .'0 2 - - - - X 818RB 601200 TCX-1-4507-H13 F-A VT-3 NA STRUT CS-2-RB-021-704-1 Fl. 10 2 - - x 818RB CHEMICAL & VOLUME CONTROL 1.5-CS-2-248-2501R-1 603600 TCX-1-4110-H3 F-A VT- 3 NA SNUBBER CS-2-RB-037A-701-1 Fl.10 2 C R1541827RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 72 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL- PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME J PERIOD PERIOD PERIOD SEC. XI OUTAGE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CHEMICAL & VOLUME CONTROL 1.5-CS-2-248-2501R-1 603700 TCX-1-4110-H4 F-A VT- 3 NA SNUBBER CS-2-RB-037A-702-1 F1. 10 2 C -

Rl541828RB 603800 TCX-1-4110-H5 F-A VT- 3 NA SNUBBER CS-2-RB-037A-703-1 Fl. 10 2 C -

R1541828RB 603900 TCX-1-4110-H6 F-A VT -3 NA SNUBBER CS-2-RB-037A-704-1 F1.10 2 C -

R1541831RB CHEMICAL & VOLUME CONTROL 2-CS-2-103-2501R-1 60.4100 TCX-1-4110-HI F-A VT -3 NA SNUBBER CS-,2-RB-037B-702-1 Fl. 10 2 C R1541826RB REACTOR COOLANT 12-RC-2-007-2501R-1 605400 TCX-1-4101-H2 F-A VT-3 NA STRUT RC-2-007-401-C41R Fl. 10 2 C R1541819 RB 605500 TCX-1-4101-Hl F-A VT-3 NA SNUBBER RC-2-007-402-C41K Fl. 10 2 C R1541819RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 73 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-- -----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 3-RC-2-052-2501R-1 608800 TCX-1-4304-H6 F-A VT-3 NA STRUT RC-2-052-409-C41R F1.10 2 C -

RI54KB14RB 608900 TCX-1-4304-H7 F-A VT- 3 NA STRUT RC-2-052-410-C41R Fl. 10 2 C -

RI54K814RB REACTOR COOLANT 4-RC-2-075-2501R-1 610900 TCX-1-4506-H21 F-A VT- 3 NA STRUT RC-2-075-417-C71R Fl. 10 2 - X 902RB 611000 TCX-l-4506-H20 F-A VT-3 NA STRUT RC-2-075-420-C71R F1.10 2 X 895RB 8

REACTOR COOLANT 4-RC-2-087-2501R-1 612500 TCX-1-4505-H30 F-A VT-3 NA SNUBBER RC-2-087-403-C81K Fl.10 2 -

908RB 612600 TCX-1-4505-H31 F-A VT-3 NA SNUBBER RC-2-087-407-C81K Fl. 10 2 -

91ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 74 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD i

ASME PERIOD PERIOD PERIOD l ---

SEC. XI I -~OUTAGE

SUMMARY

EXAMINATION AREA CATOY NDE JI INSTRUCTIONS I

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 *-CALIBRATION BLOCK**

REACTOR COOLANT 4-RC-2-087-2501R-1 612700 TCX-1-4505-H32 F-A VT-3 NA STRUT, RC-2-087-408-C81R Fl. 10 2 -

911RB REACTOR COOLANT 4-RC-2-088-2501R-1 612800 TCX-1-4506-H29 F-A VT -3 NA STRUT RC-2-088-.401-C81R Fl. 10 2 - - - - X 909RB 612900 TCX-1-4506-H33 F-A VT- 3 NA SPRING RC-2-088-403-C81S Fl. 10 2 - - - -X 913RB 613000 TCX-1-4506-H32 F-A VT- 3 NA SNUBBER RC-2-088-404-C81K Fl. 10 2 - X 913RB 613100 TCX-1-4506-H31 F-A VT-3 NA SNUBBER.

RC-2-088-408-CSIK Fl..10 - -- -X 911RB 613200 TCX-1-45068H30 F-A VT- 3 NA STRUT RC-2-088-409-C81R Fl. 10 - X 911RB REACTOR COOLANT 3-RC-2-111-2501R-1 613500 TCX-1-4504-HN F-A VT- 3 NA SNUBBER RC-2-111-402-C81K Fl. 10 X 907RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 75 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL _ PLAN

_ STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI GE--- I

OUTA---

ISRCIN

SUMMARY

EXAMINATION AREA CATGY NDE 1 - U T A G E -2 INSTRUCTIONS NUMBER IDENTIFICATION 1 2 1 2 3 1i 2 **CALIBRATION BLOCK**

ITEM NO METH REACTOR COOLANT 3-RC-2-111-2501R-1 G13600 TCX-I-4504-H2 F-A VT-3 NA SNUBBER RC-2-111-403-C81K Fl .10 - X RI61Eg07RB 613700 TCX-l-4504-N3 F-A VT- 3 NA HANGER RC-2-111-404-C81S Fl. 10 2 - - X RI61E907RB REACTOR COOLANT 14-RC-2-135-2501R-1 613900 TCX-1-4500-HI F-A VT-3 NA SNUBBER RC-2-135-402-C41K Fl. 10 - - - -X R154L832RB 614000 TCX-1-4500-H4 F-A VT- 3 NA SPRING RC-2-135-407-C41S Fl. 10 2 - - X 832RB 614200 TCX-1-4500-H5 F-A VT- 3 NA STRUT RC-2-135-409-C51R F1. 10 2 - - - X 843RB REACTOR COOLANT 3-RC-2-146-250IR-1 614400 TCX-1-4504-H5 F-A VT-3 NA SNUBBER RC-2-146-402-C81K FI.10 2 - X R161E907RB

DATE: 01/21/08 . COMANCHE PEAK UNIT 2 PAGE: 76 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE I OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 12 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 3-RC-2-146-2501R-1 614500 TCX-1-4504-H6 F-A VT-3 NA SNUBBER RC-2-146-403-C81K F1 10 2 - X RI61E907RB 614600 TCX-1-4504-H4 F-A VT-3 NA SNUBBER RC-2-146-406-CB1K Fl. 10 2 X R161E908RB REACTOR COOLANT 6-RC-2-147-2501R-1 614800 TCX-1-4506-H34 F-A VT -3 NA SNUBBER RC-2-147-403-C81K F1.i10 2 - X RI60B913RB 615000 TCX-1-4506-H2 F-A VT-3 NA SPRING RC-2-147-406-C81S Fl. 10 2 - - X - -

RIG1A913RB 615050 TCX-1-4506-H2 B-K PT 92 WELDED ATTACHMENT RC-2-147-406-C81S B10.20 2 - X - -

RI61A913RB 615100 TCX-1-4506-H35 F-A VT- 3 NA STRUT RC-2-147-408LC81R Fl. 10 2 RIG6OB9.3RB REACTOR COOLANT 6-RC-2-161-2501R-1 615200 TCX-1-4506-Hl F-A VT- 3 NA BOX RC-2-161-402-C81A F. 10 2 - X R1G1E909RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE- 77 INSERVICE INSPECTION PLAN CLASS I SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI

- OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT 6-RC-2-161-2501R-1 615250 TCX-1-4506-H1 B-K PT 92 WELDED ATTACHMENT RC-2-161-402-C81A B10.20 2 - - x R161E909RB REACTOR COOLANT 4-RC-2-162-2501R-1 615600 TCX-1-4506-N28 F-A VT -3 NA STRUT RC-2-162-401-C81R F.110 2 - X R160B909RB 615700 TCX-1-4506-H27 F-A VT- 3 NA SNUBBER RC-2-162-402-C81K Fl. 10 2 - - - - -x RI60B909RB 615800 TCX-1-4506-H26 F-A VT- 3 NA bTRUT RC-2-162-403-CSIR Fl . 10 X RI606909RB 615900 TCX-1-4506-H25 F-A VT-3 NA STRUT RC-2-162-404-C81R Fl. 10 2 - - - X RI6OB909RB REACTOR COOLANT 6-RC-2-163-2501R-1 616000 TCX-1-4505-Hl F-A VT-3 NA BOX RC-2-163-402-CIA F1.10 2 - - - x RI61E908RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 78 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ P LAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH V1 2 1 2 3 1 2 **CALIBRATION BLOCK-REACTOR COOLANT 6-RC-2-163-2501R-1 616050 TCX-1-4505-HI B-K PT 92 WELDED ATTACHMENT RC-2-163-402-C81A B10.20 2 - X R161Eg08RB REACTOR COOLANT 4-RC-2-164-2501R-1 616200 TCX-1-4505-H28 F-A VT-3 NA STRUT RC-2-164-402-C81R F1.10 2 - - X -

R16OBS90RB REACTOR COOLANT 4-RC-2-162-2501R-1 616300 TCX-1-4505-H27 F-A VT- 3 NA STRUT RC-2-164-403-C81R Fl. 10 2 - - x - - -

RI60B908RB REACTOR COOLANT 2-RC-2-015-2501R-1 616500 TCXTl-4109-H2 F-A VT-3 NA SNUBBER RC-2-RB-027-702-1 Fl.10 X -

R1541813RB 616600 TCX-1-4109-H3 F-A VT-3 NA SPRING RC-2-RB-027-703-1 Fl. 10 X R1541813RB 616700 TCX-1-4109-H4 F-A VT- 3 NA SNUBBER RC-2-RB-027-704-1 Fl. 10 2 Ri541813RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 79 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

- OUTAGE-- -----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2. **CALIBRATION BLOCK**

REACTOR COOLANT 2-RC-2-01S-2501R-1 616800 TCX-1-4109-H5 F-A VT- 3 NA SNUBBER RC-2-RB-027-705-1 Fl. 10 2 - X - -

R1541813RB 617100 TCX-I-4109-H8 F-A VT- 3 NA SNUBBER RC-2-RB-027-708-1 Fl. 10 2 - X - - - -

RI541813RB RESIDUAL HEAT REMOVAL 12-RN-2-001-2501R-1 618800 TCX-1-4101-H3 F-A VT- 3 NA SPRING RH-2-001-404-C41S Fl. 10 2 C -

RI541817RB 618900 TCX-1-4101-H9 F-A VT-3 NA STRUT RH-2-001-405-C41R Fl.10 2 C RI54A817RB 619200 TCX-1-4101-H8 F-A VT- 3 NA SNUBBER RH-2-001-408-C41K Fl. 10 2 C R154A817RB RESIDUAL HEAT REMOVAL 12-RH- 2-002-2501R-1 619400 TCX-1-4401-H9 F-A VT- 3 NA STRUT RH-2-002-401-C41R Fl. 10 2 - - X 817RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 80 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL ,PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE.-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL 12-RH-2-002-2501R-1 620000 TCX-1-4401-H4 F-A VT -3 NA STRUT RH-2-002-408-C41R F1. 10 2 - - X 817 RB SAFETY INJECTION 3-SI-2-033-2501R-1 620100 TCX-1-4600-H3 F-A VT- 3 NA SPRING SI-2-033-405-C41S Fl. 10 - - X - -

R154D818RB 620125 TCX-1-4600-H4 F-A VT- 3 NA STRUT SI-2-033-401-C41R Fl. 10 2 - X - -

R154D818RB 620150 TCX-1-4600-H5 V-A VT-A NA SNUBBER SI-2-033-403-C41K Fi.10 X R154DB18RB SAFETY INJECTION 6-SI-2-089-2501R-1 620300 TCX-1-4103-HI F-A VT-3 NA SI-2-089-402-C41S Fl.10 2 - C Ri541827RB 620350 TCX-1-4103-HI B-K PT 92 SPRING SI-2-089-402-C41S B10.20 2 - C R1541828RB

DATE: 01/21/0B COMANCHE PEAK UNIT 2 PAGE: 81 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE----------- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 123 12 *CALIBRATION BLOCK**

SAFETY INJECTION 6-SI-2-089-2501R-1 620400 TCX-1-4103-H3 F-A VT-3 NA SNUBBER SI-2-089-403-C41K Fl. 10 2 - C RI541820RB 620500 TCX-1-4103-H6 F-A VT-3 NA SNUBBER SI-2-089-404-C41K Fl. i0 2 - C R1541826RB 620600 TCX-1-4103-H5 F-A VT -3 NA SNUBBER SI-2-089-405-C41K Fl. 10 2- C R1541826RB SAFETY INJECTION 8-SI-2-090-2501R-1 620800 TCX-1-4202-NI F-A VT -3 NA SPRING SI-2-090-402-C41S Fl. 10 2 - C RI54J826RB 620850 TCX-1-4202-Hl B-K PT 92 WELDED ATTACHMENT SI-2-090-402-C41S B10.20 2 - C Ri54J826RB 620900 TCX-1-4202-H3 F-A VT -3 NA SNUBBER SI-2-090-403-C41K Fl. 10 R154J820RB 621000 TCX-1-4202-H4 F-A VT-3 NA SNUBBER SI-2-090-404-C41K Fl. 10 2 - x - -

R154JB25RE

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 82 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST .SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-- OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

SAFETY INJECTION 8-SI-2-091-2501R-1 621200 TCX-1-4302-H3 F-A VT-3 NA STRUT SI-2-091-401-C41R Fl. 10 2 - X 816RB SAFETY INJECTION 6-SI-2-101-2501R-1 622100 TCX-1-4203-HI F-A VT- 3 NA SPRING SI-2-101-403-C41S Fl. 10 2 -

R154J828RB 622150 TCX-1-4203-Hl B-K PT 92 WELDED ATTACHMENT SI-2-101-403-C41S 210.20 2 -

R154J828RB 622200 TCX-1-4203-H2 F-A VT -3 NA STRUT SI-2-101-407-C41R Fl. 10 2 - X -

R154B823RB SAFETY INJECTION 6-SI-2-102-2501R-1 622400 TCX-1-4303-Hl F-A VT- 3 NA SPRING SI-2-102-403-C41S Fl. 10 2 -

828RB 622450 TCX-1-4303-HI B-K PT 92 WELDED ATTACHMENT

'2 SI-2-102-403-C41S B10.20 X -

828RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 83 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ __PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - --OUTAGE-------------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 23 1 2 I **CALIBRATION BLOCK**

RAEPTY TNJFCTTON I .R-,qT-2-027-2501R-I 624700 TCX-1-4306-HI2 F-A VT -3 NA STRUT SI-2-RB-007-702-1 Fl. 10 2 - - X R154D815RB 625000 TCX-1-4306-H15 F-A VT- 3 NA U-BOLT SI-2-RB-007-705-1 Fl. 10 2 - X RI54C815RB 625100 TCX-1-4306-HI6 F-A VT- 3 NA STRUT SI-2-RB-007-706-1 F1. 10 2 - X R154C1S5RB 625300 TCX-1-4306-HI8 F-A VT-3 NA STRUT SI-2-RB-007-708-1 F1. 10 2 - - - X R154C815RB 625600 TCX-1-4306-H21 F-A VT-3 NA U-BOLT SI-2-RB-007-711-1 Fl. 10 - X R154C817RB 626000 TCX-1-4306-H2 F-A VT- 3 NA STRUT SI-2-RB-008-702-1 Fl. 10 2 X R154D818RB 626300 TCX-1-4306-HS F-A VT -3 NA STRUT SI-2-RB-008-707-1 F1. 10 X R154H818RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 " PAGE: 84 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -- -- -- ---. -- ----.- -.- --- -- --

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE--------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 1.5-SI-2-027-2501R-I 626400 TCX-1-4306-H6 F-A VT -3 NA STRUT SI-2-RB-008-708-1 Fl. 10 2 - - - -X R154H818RB 626600 TCX-1-4306-H8 F-A VT- 3 NA STRUT SI-2-RB -008-710-1 Fl. 10 2 - - - - -X Rl54D817RB SAFETY INJECTION 1.5-SI-2-201-2501R-I 627400 TCX-l-4306-H29 F-A VT-3 NA SNUBBER SI-2-RB -009-707-1 F1. 10 2 - - - -X R154K828RB 627600 TCX-l-4306-H32 F-A VT -3 NA SNUBBER SI-2-RB-009-709-1 F1. 10 2 - - - - X RE54K829RB SAFETY INJECTION 2-SI-2-067-2501R-l 627800 TCX-1-4302-HI F-A VT-3 NA SNUBBER SI-2-RB-010A-705-1 F.10 X -

81SRB SAFETY INJECTION l.S-SI-2-026-2501R-1 628100 TCX-l-4205-HI4 F-A VT- 3 NA U-BOLT SI-2-RB-032-701-1 F1.10 2 - X - -

R154B817RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 85 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ ___ -PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI J I

SUMMARY

EXAMINATION AREA CATGY NDE . ..- 0 U T A G E -.. INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 2 1 j1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 1.5-SI-2-026-2501R-I 628400 TCX-1-4205-H17 F-A VT- 3 NA SNUBBER SI-2-RB-032-704-1 Fl. 10 2 - X - -

RI54B817RB 629100 TCX-1-4205-H4 F-A VT-3 NA SNUBBER SI-2-RB-033-703-1 Fl. 10 2 X - -

R154B818RB 629200 TCX-1-4205-H3 F-A VT- 3 NA SNUBBER SI-2-RB-033-704-1 F1.10 2 - X - -

RI54B18RB SAFETY INJECTION 2-SI-2-0B6-2501R-1 634600 TCX-1-4404-H6 F-A VT-3 NA SPRING SI-2-RB-052-705-1 Fl. 10 X 819RB REACTOR COOLANT TCX-RCPCSG-01 640040 TCX-1-3100-1CS1 F-A VT-3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-01-SI F1.40 - X - TDLR VERIFICATION BOUNDARY.

A23 812RB 640050 TCX-1-3100-1CS2 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-01-S2 Fl.40 - N TDLR VERIFICATION BOUNDARY.

A23 812RB

.DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 86 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ _ PLAN STATUS_ _ PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI ---....

SUMMARY

EXAMINATION AREA CATGY NOE - 0 U T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCRO-01 640060 TCX-1-3100-1CS3 F-A VT- 3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-01-S3 Fl. 40 2 - - - X TDLR VERIFICATION BOUNDARY.

A23 812RB 640070 TCX-1-3100-1CS4 F-A VT-3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-01-S4 Fl. 40 2 - - X - TDLR VERIFICATION BOUNDARY.

A23 812RB 640080 TCX-1-3100-1LS1 F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-01-LI F1.40 2 - - - X - 1457F31. TDLR VERIFICATION A23 835RB BOUNDARY.

640090 TCX-1-3100-1LS2 F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-01-L2 F1.40 2 - X 1457F31. TDLR VERIFICATION A23 835RB BOUNDARY.

640100 TCX-1-3100-1LS3 F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-01-L3 F1. 40 2 X 1457F31. TDLR VERIFICATION A23 835RB BOUNDARY.

640110 TCX-1-3100-1USI F-A VT- 3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-01-Ul Fl . 40 2 - - X - 1457F34. TDLR VERIFICATION A24 859RB BOUNDARY.

640120 TCX-1-3100-1US2 F-A VT -3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-01-U2 F1. 40 X 1457F34. TDLR VERIFICATION A24 859RB BOUNDARY.

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 87 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCSG-01 640130 TCX-1-3100-1US3 F -,A VT -3 NA S.G. UPPER LATERAL SUPPORT, TCX-RCESSG-01-U3 F1. 40 2 - - X 1457F35. RING. TDLR A24 859RB VERIFICATION BOUNDARY.

640140' TCX-1-3100-1SN1 F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-01-SN1 F1.40 2 - X - - TDLR VERIFICATION BOUNDARY.

A24 859RB 640150 TCX-1-3100-1SN2 F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-01-SN2 F1.40 2 X TDLR VERIFICATION BOUNDARY.

A24 859RB REACTOR COOLANT TCX-RCPCSG-02 640160 TCX-1-3100-2CS1 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-02-S1 F1.40 2 X - - - - TDLR VERIFICATION BOUNDARY.

R1551812RB 640170 TCX-1-3100-2CS2 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-02-S2 F1.40 X TDLR VERIFICATION BOUNDARY.

R1551812RB 640190 TCX-1-3100-2CS3 F-A VT- 3 NA SG. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-02-S3 Fl. 40 2 - TDLR VERIFICATION BOUNDARY.

R1551812RB 640200 TCX-1-3100-2CS4 F-A VT- 3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-02-S4 F1. 40 x - - TDLR VERIFICATION BOUNDARY.

R1551812RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 88 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS- PRESERVICE YEAR FIRST SECOND THIRD ASME . PERIOD PERIOD PERIOD SEC. XI -------- -I

SUMMARY

EXAMINATION AREA CATGY NDE 0 U TAG INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCSG-02 640210 TCX-1-3100-2LSI F-A VT -3 NA S.G. LOWER LATERAL SUPPORT:

TCX-RCESSG-02-Ll Fl. 40 2 - X - - 1457F31. TDLR VERIFICATION R1551812RB BOUNDARY.

640220 TCX-1-3100-2LS2 F-A VT -3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-02-L2 F1.40 X 1457F31. TDLR VERIFICATION RI551835RB BOUNDARY.

640230 TCX-1-3100-2LS3 F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-02-L3 F1.40 X 1457F31. TDLR VERIFICATION R1551835RB BOUNDARY.

640240 TCX-1-3100-2US1 F-A VT -3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-02-Ul F1.40 2 - X - - 1457F34. TDLR VERIFICATION RI551859RB 'BOUNDARY.

640250 TCX-1-3100-2US2 F-A VT -3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-02-U2 FI.40 2 N 1457F34. TDLR VERIFICATION R1551859RB BOUNDARY.

640260 TCX-1-3100-2US3 F-A VT- 3 NA S.0G. UPPERLATERAL SUPPORT.

TCX-RCESSG-02-U3 Fl. 40 1457F35. RING. TDLR RI518559RB VERIFICATION BOUNDARY.

640270 TCX-1-3100-2SN1 F-A VT- 3 NA S.G. HYD. SHOCK SUPRESSORS.

vTCX-RCESHS-02-SNI F1. 40 2 X -

RI551859RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 89 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK"*

REACTOR COOLANT TCX-RCPCSG-02 640280 TCX-i-3100-2SN2 F-A VT-3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-02-SN2 Fl.40 2 - - X - - TDLR VERIFICATION BOUNDARY.

RI551859RB d

REACTOR COOLANT TCX-RCPCSG-03 640290 TCX-i-3100-3CS1 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-03-S1 F1.40 2 - - X TDLR VERIFICATION BOUNDARY.

R154K812RB 640300 TCX-i-3100-3CS2 F-A VT- 3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-03-S2 F1.40 2 - - -- -X TDLR VERIFICATION BOUNDARY.

RI54K812RB 640310. TCX-i-3100-3CS3 F-A VT- 3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-03-S3 F1.40 - X TDLR VERIFICATION BOUNDARY.

R154K812RB 640320 TCX-1-3100-3CS4 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-03-S4 F1.40 2 - - X TDLR VERIFICATION BOUNDARY.

RI54K812RB 640330 TCX-I-3100-3LSI F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-03-Li F1.40 2 - - - - - X 1457F31. TDLR VERIFICATION R154K827RB BOUNDARY.

640340 TCX-l-3100-3LS2 F-A VT-3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-03-L2 Fl.40 2 - - - - X 1457F31. TDLR VERIFICATION R154K827RB BOUNDARY.

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 90 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS- _PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OU A E-----------

ISRCON

SUMMARY

EXAMINATION AREA CATGY NDE 1 U T A G E - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I *CALIBRATIO*

N BLOCK*-

REACTOR COOLANT TCX-RCPCSG-03 640350 TCX-1-3100-3LS3 F-A VT- 3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-03-L3 F1.40 2 - X 1457F31. TDLR VERIFICATION RI54K827RB BOUNDARY.

640360 TCX-1-3100-3US1 F-A VT -3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-03-Ul F1.40 - - - - 1457F34. TDLR VERIFICATION R154KS59RB BOUNDARY.

640370 TCX-1-3100-3US2 F-A VT- 3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-03-U2 Fl, 40 2 - - X 1457F34. TDLR VERIFICATION R154K859RB BOUNDARY.

640380 TCX-1-3100-3US3 F-A VT- 3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-03-U3 F1.40 - - - X 1457F35. RING. TDLR R154K859RB VERIFICATION BOUNDARY.

640390 TCX-1-3100-3SN1 F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-03-SNI F1.40 2 - - N TDLR VERIFICATION BOUNDARY.

RI54KB59RB 640400 TCX-1-3100-3SN2 F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-03-SN2 F1.40 2 - N TDLR VERIFICATION BOUNDARY.

R154K859RB REACTOR COOLANT TCX-RCPCSG-04 640410 TCX-1-3100-4CS1 F-A VT-3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-04-SI Fl.40 2 - C TDLR VERIFICATION BOUNDARY.

A29 812RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 91 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _PRESERVICE YEAR FIRST SECOND THIRD I ASME PERIOD PERIOD PERIOD V3 SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1. 2 3 1 .2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCSG-04 640420 TCX-1-3100-4CS2 F-A VT-3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-04-S2 Fl. 40 2 - C TDLR VERIFICATION BOUNDARY.

A29 812RB 640430 TCX-1-3100-4CS3 F-A VT -3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-04-S3 F1.40 2 - C TDLR VERIFICATION BOUNDARY.

A29 812RB 640440 TCX-1-3100-4CS4 F-A VT- 3 NA S.G. COLUMN SUPPORT. 1457F29.

TCX-RCESSG-04-S4 F1.40 2 - C TDLR VERIFICATION BOUNDARY.

A29 812RB 640450 TCX-1-3100-4LS1 F-A VT -3 NA S.G. LOWER LATERAL SUPPORT.

TCX-RCESSG-04-Ll Fl. 40 2 - C 1457F31. TDLR VERIFICATION A29 835RB BOUNDARY.

640460 TCX-1-3100-4LS2 F-A VT-3 NA SG. LOWER LATERAL SUPPORT, TCX-RCESSG-04-L2 Fl. 40 2 - C 1457F31. TDLR VERIFICATION A29 835RB BOUNDARY.

640470 TCX-l-3100-4LS3 F-A VT-3 NA S.G. LOWER LATERAL SUPPORT, TCX-RCESSG-04-L3 Fl. 40 2 - C 1457F31. TDLR VERIFICATION A29 835RB BOUNDARY.

640480 TCX-l-3100-4US1 F-A VT- 3 NA S.G. UPPER LATERAL SUPPORT, TCX-RCESSG-04-Ul F1.40 - x - - 1457F34. TDLR VERIFICATION A30 859RB BOUNDARY.

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 92 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ __PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -.....

SUMMARY

EXAMINATION AREA CATGY NDE- - - - --- 0 U T A G E------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 12 **CALIBRATIOI N BLOCK--

REACTOR COOLANT TCX-RCPCSG-04 640490 TCX-1-3100-4US2 F-A VT-3 NA SOG. UPPER LATERAL SUPPORT.

TCX-RCESSG-04-U2 Fl. 40 2 - X - - 1457F34. TDLR VERIFICATION A30 859RB BOUNDARY.

640500 TCX-1-3100-4US3 F-A VT- 3 NA S.G. UPPER LATERAL SUPPORT.

TCX-RCESSG-04-U3 F1.40 2 - X 1457F35. RING. TDLR A30 859RB VERIFICATION BOUNDARY.

640510 TCX-1-3100-4SNI F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-04-SNI F1.40 2 - X - - TDLR VERIFICATION BOUNDARY.

A30 859RB 640520 TCX-1-3100-4SN2 F-A VT- 3 NA S.G. HYD. SNUBBER. PD14856.

TCX-RCESHS-04-SN2 F1.40 X - - TDLR VERIFICATION BOUNDARY.

A30 859RB REACTOR COOLANT TCX-RCPCPC-01 640530 TCX-1-5100-1P1 F-A VT-3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-01-Pl F1.40 2 C - 1457F29. TDLR VERIFICATION R154H812RB BOUNDARY.

640540 TCX-I-5100-1P2 F-A VT -3 NA RC PUMP COLUMN SUPPORTS.

-TCX-RCESPC-01-P2 FI.40 2 C 1457F29. TDLR VERIFICATION R154HS12RB BOUNDARY.

640550 TCX-1-5100-1P3 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-01-P3 Fl. 40 2 C 1457F29. TDLR VERIFICATION R154HS12RB BOUNDARY.

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 93 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 10 U T A 0 E - -

  • INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 23 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCPC-01 640560 TCX-1-5100-1T1 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-01-Tl F1.40 2 C TDLR VERIFICATION BOUNDARY.

R154BS30RB 640570 TCX-1-5100-1T2 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-01-T2 Fl.40 2 C - TDLR VERIFICATION BOUNDARY.

R154H830RB 640580 TCX-1-5100-1T3 F-A VT-3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-01-T3 F1.40 2 C - TDLR VERIFICATION BOUNDARY.

RI54H83ORB SF.ACTnR m*TANT TCX-RCpCPC-fl2 REACTOR COOLANT TCX-RCPCPC-02 640590 TCX-1-5100-2P1 F-A VT -3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-02-PI F1.40 2 X 1457F29. TDLR VERIFICATION A25 812RB BOUNDARY.

640600 TCX-1L5100-2P2 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-02-P2 FP. 40 2 - X 1457F29. TDLR VERIFICATION A25 812RB BOUNDARY.

640610 TCX-1-5100-2P3 F-A VT -3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-02-P3 FP .40 2 - - X 1457F29. TDLR VERIFICATION A25 812RB BOUNDARY.

640620 TCX-1-5100-2T1 F-A VT-3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-02-Tl F1.40 2 - x TDLR VERIFICATION BOUNDARY.

A25 830RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 94 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR' FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE INSTRUCTIONS ITEM NO METH 1 2 1 23 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION REACTOR COOLANT TCX-RCPCPC-02 640630 TCX-1-5100-2T2 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-02-T2 F1.40 2 - X TDLR VERIFICATION BOUNDARY.

A25 83DRB I

640640 TCX-1-5100-2T3 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-02-T3 F1.40 2 - - - - -X TDLR VERIFICATION BOUNDARY.

A25 830RB RFAC'Tfl CflfT.ANT TCX-RCPCPC-03 REACTOR COOLANT TCX-RCPrPr-nl 640650 TCX-1-5100-3P1 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-03-Pl Fl. 40 2 - X - 1457F29. TDLR VERIFICATION RI55J812RB BOUNDARY.

640660 TCX-l-5100-3P2 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-03-p2 Fl. 40 2 - X 1457F29. TDLR VERIFICATION R155J812RB BOUNDARY.

640670 TCX-l-5100-3P3 F-A VT -3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-03-P3 F1.40 2 - X 1457F29. TDLR VERIFICATION R15SJ812RB BOUNDARY.

640680 TCX-l-5100-3T1 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-03-Tl I. 40 2 X - - - TDLR VERIFICATION BOUNDARY.

R155J830RB 640690 TCX-1-5100-3T2 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-03-T2 Fl.40 X - TDLR VERIFICATION BOUNDARY.

R155J83ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 95 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE---- ------------

SUMMARY

EXAMINATION AREA CATGY NDE F INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCPC-03 640700 TCX-1-5100-3T3 F-A VT-3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-03-T3 F1.40 2 X - TDLR VERIFICATION BOUNDARY.

RI55J830RB REACTOR COOLANT TCX-RCPCPC-04 640710 TCX-1-5100-4P1 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-04-Pl Fl.40 2 - C 1457F29. TDLR VERIFICATION RI55K812RB BOUNDARY.

640720 TCX-1-5100-4P2 F-A VT- 3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-04-P2 Fl.40 2 - C 1457F29. TDLR VERIFICATION R155KB12RB BOUNDARY.

640730 TCX-1-5100-4P3 F-A VT -3 NA RC PUMP COLUMN SUPPORTS.

TCX-RCESPC-04-P3 F1.40 2 - C 1457F29. TDLR VERIFICATION RI55K812RB BOUNDARY.

640740 TCX-1-5100-4T1 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-04-TI F1.40 2 - C TDLR VERIFICATION BOUNDARY.

R155KB30RB 640750 TCX-1-5100-4T2 F-A VT- 3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-04-T2 Fl. 40 2 - C TDLR VERIFICATION BOUNDARY.

RI55K83ORB 640760 TCX-1-5100-4T3 F-A VT-3 NA RC PUMP TIE RODS. 1457F33.

TCX-RCESPC-04-T3 Fl.40 2 - C TDLR VERIFICATION BOUNDARY.

R155K830RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 96 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS 1

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

REACTOR COOLANT TCX-RCPCPR-01 640770 TCX-1-2100-USI F-A VT-3 NA PRESSURIZER UPPER LATERAL TCX-RCESPR-01-Wl F1.40 2 - C SUPPORTS. 1457F36. TDLR RI61A905RB VERIFICATION.. BOUNDARY.

640780 TCX-1-2100-US2 F-A VT- 3 NA PRESSURIZER UPPER LATERAL TCX-RCESPR-01-W2 Fl.40 2 - C SUPPORTS. 1457F36. TDLR RlGIA905RB VERIFICATION BOUNDARY.

640790 TCX-1-2100-US3 F-A VT- 3 NA PRESSURIZER UPPER LATERAL TCX-RCESPR-01-W3 Fl. 40 2 - C SUPPORTS. 1457F36. TDLR R161A905RB VERIFICATION BOUNDARY.

640800 TCX-1-2100-US4 F-A VT- 3 NA PRESSURIZER UPPER LATERAL TCX-RCESPR-01-W4 Fl. 40 2 - C SUPPORTS. 1457F36. TDLR 1RIlA9OERP VERIFICATION BOUNDARY.

640810 TCX-1-2100-LS1 F-A VT- 3 NA PRESSURIZER LOWER SUPPORT.

TCX-RCESPR-01 Fl. 40 2 - C TDLR VERIFICATION BOUNDARY.

RI61A905RB SAFETY INJECTION 2-SI-2-059-2501R-I 640830 TCX-1-4108-MR2 F-A VT-3 NA MOMENT RESTRAINT. Sl-0538-11 I

CP2-SISSMR-02 FI...40 2 C -

R154A820RB SAFETY INJECTION 6-SI-2-101-2501R-1 640840 TCX-1-4203-MR3 F-A VT-3 NA MOMENT RESTRAINT. SI-0538-06 CP2-SISSMR-03 F1.40 X -

R154B823RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 97 INSERVICE INSPECTION PLAN CLASS 1 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 8-SI-2-090-2501R-1 640870 TCX-1-4202-MR6 F-A VT- 3 NA MOMENT RESTRAINT. Sl-0538-03 CP2-SISSMR-06 F1.40 2 - X - - -

R154B820RB SAFETY INJECTION 3-SI-2-303-2501R-1 640900 TCX-1-4600-MR9 F-A VT- 3 NA MOMENT RESTRAINT. S1-0538-13 CP2-SISSMR-09 F1.40 2 - C R154A808RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 98 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL __PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI ----------- ----------- I

SUMMARY

EXAMINATION AREA CATGY NDE 1/2. - OUTAGE1-- - I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 23 1 2

    • CALIBRATION BLOCK**

CHEMICAL & VOLUME CONTROL 4-CS-2-076-2501R-2 652900 TCX-2-2569-H5 F-A VT- 3 NA STRUT CS-2-076-402-A42R Fl. 20 2 - - - - X -

818AB 653300 TCX-2-2569-H1 F-A VT -3 NA SNUBBER CS-2-076-407-A42K F1.20 2 - X -

818AB MICAL & -- --- 4-C-2-8-2-1-2 653400 TCX-2-2570-H1 F-A VT-3 NA SPRING CS-2-085-402-A42S F1.20 2 C R194 818AB CHEMICAL & VOLUME CONTROL 4-CS-2-346-2501R-2 655400 TCX-2-2570-Hll F-A VT- 3 NA STRUT CS-2-346-401-A42R F1.20 2 C -

R200 816AB CHEMICAL & VOLUME CONTROL 3 CS-2-628-2501R-2 655600 TCX-2-2569-H7 F-A VT-3 NA SNUBBER CS-0-628-402-A42K FI. 20 2 - X -

819AB CHEMICAL & VOLUME CONTROL 3 CS-2-629-2501R-2 655700 TCX-2-2570-H7 F-A VT-3 NA STRUT CS-2-629-700-A42R Fl.20 2 C -

R202 818AB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 99 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I g -~OUTAGE

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS i

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2. 3 12 **CALIBRATION BLOCK**

CHEMICAL & VOLUME CONTROL 2-CS-2-086-2501R-2 655800 TCX-2-2570-H9 F-A VT- 3 NA SNUBBER CS-2-AB-071-004-2 F1,20 2C R202 818AB 655900 TCX-2-2570-H8 F-A VT- 3 NA SPRING CS-2-AB-071-005-2 F1. 20 2 C -

R202 818AB CONTAINMENT SPRAY 16-CT-2-002-151R-2 656500 TCX-2-2536-HI F-A VT-3 NA SNUBBER' CT-2-002-402-S22K F1.26 2 - X 788SB 656550 TCX-2-2536-HI C-C' PT 92 WELDED ATTACHMENT CT-2-002-402-S22K C3.20 2 - - x -

788SB CONTAINMENT SPRAY 16-CT-2-002-151R-2 656800 TCX-2-25,75-HI F-A VT-3 NA BOX CT-2-003-401-S32A Fl. 20 2 - - X 802SB 656850 TCX-2-2575-Hl C-C PT 92 WELDED ATTACHMENT CT-2-003-401-S32A C3 .20 2 - x 802SB

DATE: 01/21/0B COMANCHE PEAK UNIT 2 PAGE; 100 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ _ _ PLAN STATUS_ _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

------------OUTAGE---

ISRC ON

SUMMARY

EXAMINATION AREA CATGY NDE 1 U T A G E -C-INSTRUCTIONS 2

NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CONTAINMENT SPRAY 16-CT-2-003-151R-2 656900 TCX-2-2575-H5 F-A VT -3 NA STRUT CT-2-003-402-S32R F1.20 2 X - -

802SB 657000 TCX-2-2575-H7 F-A VT- 3 NA STRUT CT-2-003-403-S32R Fl. 20 2 - X 802SB 657100 TCX-2-2575-H6 F-A VT- 3 NA STRUT CT-2-003-404-S32R F1.20 2 - - - X 802SB 657200 TCX-2-2575-H8 F-A VT- 3 NA SPRING CT-2-003-405-S32S Fl. 20 2 - - X B02SB 657300 TCX-2-2575-H9 F-A VT- 3 NA STRUT CT-2-003-406-S32R Fl. 20 - X - -

800SB 657400 TCX-2-2575-H10 F-A VT -3 NA STRUT CT-2-003-407-S32R Fl. 20 X 793SB CONTAINMENT SPRAY I6-CT-2-004-151R-2 657500 TCX-2-2577-H5 F-A VT-3 NA STRUT CT-2-004-401-S32R Fl. 20 2 -X 792SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 101 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -___ PLAN STATUS_ _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

-- --- -- --. ---.7.-- ---. -- - - ---

CONTAINMENT SPRAY 12-CT-2-005-151R-2 657900 TCX-2-2576-HS F-A VT-3 NA SNUBBER CT-2-005-404-S22K Fl. 20 2 - X 785SB 658300 TCX-2-2576-HI F-A VT- 3 NA SPRING CT-2-005-408-S22S F1.20 2 - - - X 780SB 658350 TCX-2-2576-H1 C-C PT 92 WELDED ATTACHMENT CT-2-005-408-$22S C3 .20 2 - - - X - -

780SB CONTAINMENT SPRAY '12-CT-2-006-151R-2 658800 TCX-2-2576-H2 F-A VT-3 NA SPRING CT-2-006-407-S22S F1.20 X - -

779SB 658850 TCX-2-2576-H2 C-C PT 92 WELDED ATTACHMENT CT-2-006-407-S22S C3 . 20 2 - X 779SB CONTAINMENT SPRAY 12-CT-2-007-151R-2 659400 TCX-2-2578-H12 F-A VT-3 NA STRUT CT-2-007-406-S22R F1.20 2 X 781SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 102 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR Il FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-- OUTAGE---------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CONTAINMENT SPRAY 12-CT-2-007-151R-2 659600 TCX-2-2578-H14 F-A VT-3 NA STRUT CT-2-007-408-S22R F1.20 2 X 781SB CONTAINMENT SPRAY 12-CT-2-008-151R-2 659700 TCX-2-2578-HI F-A VT-3 NA SPRING CT-2-008-401-$22S Fl. 20 2 - - - X 779SB 659750 TCX-2-2578-HI C-C PT 92 WELDED ATTACHMENT CT-2-008-401-S22S C3 .20 2 - X 779SB CONTAINMENT SPRAY 16-CT-2-013-301R-2 662200 TCX-2-2571-HI5 F-A VT- 3 NA SNUBBER CT-2-013-408-S42K F1.20 2 - - X 818SB CONTAINMENT SPRAY 16-CT-2-025-301R-2 664640 TCX-2-2539-H2 F-A VT- 3 NA HANGER CT-2-025-401-S22R Fl. 20 X R62E 785SB 664670 TCX-2-2539-H5 F-A VT -3 NA HANGER CT-2-025-402-S22S F1. 20 2 - X - -

R62E 785SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 103 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD II ASME PERIOD PERIOD PERIOD I

SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE - - T A E---- -- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 12 1 2 3 1 2 1 **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-017-1303-2 666000 TCX-2-2301-H3 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-017-446-C72R Fl. 20 X BOUNDARY RI55N888 RB 666050 TCX-2-2301-H3 C-C MT 92 WELDED ATTACHMENT FW-2-017-446-C72R C3 . 20 2 - X - - - -

R155N8BBRB 666100 TCX-2-2301-H13 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-017-450-C72S Fl. 20 2 - - -- -X BOUNDARY 888RB 666200 TCX-2-2301-HI2 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-0i7-451-C72R P1.20 2 X BOUNDARY 888RB 666300 TCX-2-2301-Hll F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-017-453-C62R F1.20 2 - - - - -X BOUNDARY 87 ORB 666400 TCX-2-2301-H5 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-017-454-C52K F1.20 2 X BOUNDARY RIS5N856RB 666450 TCX-2-2301-H5 C-C MT 92 WELDED ATTACHMENT FW-2-017-454-C52K C3 . 20 2 - X -

R155NB56RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 104 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-017-1303-2 666500 TCX-2-2301-HI0 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-017-456-C52R F1.20 2 - - - X BOUNDARY 856RB 666600 TCX-2-2301-H24 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-017-700-C42K F1.20 2 - X 'BOUNDARY 827RB 666700 TCX-2-2301-Hl F-A VT-3 NA HANGER. TDLR VERIFICATION FW-2-017-701-C52R F1.20 2 - X - - - BOUNDARY RI5SN849RB 666750 TCX-2-2301-Hl C-C MT 92 WELDED ATTACHMENT FW-2-017-701-C52R C3. 20 2 X R15SN849RB 666800 TCX-2-2301-H14 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-017-702-C72R Fl. 20 2 - BOUNDARY 888RB 666900 TCX-2-2301-H4 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-017-703-C62R Fl. 20 BOUNDARY R155N873RB 666950 TCX-2-2301-H4 C-C MT 92. WELDED ATTACHMENT FWM-2-017-703-C62R C3.20 X -

R155N873RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 105 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 i **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-017-1303-2 667000 TCX-2-2301-HI5 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-017-704-C72R F1.20 2 - - -- -X BOUNDARY 888RB 667100 TCX-2-2301-H20 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-017-705-C72R Fl. 20 2 - - - X BOUNDARY 888RB FEEDWATER 18-FW-2-018-1303-2 667400 TCX-2-2202-H6 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-018-434-CS2R F1.20 2 - - X - BOUNDARY R15SL856RB 667500 TCX-2-2201-H4 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-018-441-C72R F1.20 2 X BOUNDARY R155N888RB 667550 TCX-2-2201-H4 C-C MT 92 WELDED ATTACHMENT FW-2-018-441iC72R C3.20 2 X - -

RI55N888RB 667600 TCX-2-2201-H9 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-018-443-C72R F1 . 20 2 - X BOUNDARY R155N8OBRB 667800 TCX-2-2201-HIO F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-018-445-C72R Fl . 20 X BOUNDARY R155N888RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 106 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -PLAN STATUS _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. xI------------- -------------------

SUMMARY

EXAMINATION AREA CATGY NDE - ---------- O U T A G E- -- - ----- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-018-1303-2 667900 TCX-2-2201-H3 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-018-446-C72R F1.20 2 - X BOUNDARY R15SN888RB 667950 TCX-2-2201-H3 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-018-446-C72R C3.20 2 - X - - VERIFICATION BOUNDARY.

R155N888RB 668000 TCX-2-2201-HN1 F-A VT- 3 NA 'STRUT. TDLR VERIFICATION FW-2-018-447-C72R Fl. 20 2 - X BOUNDARY R155N888RB 668100 TCX-2-2201-H2 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-018-448-C72K F1.20 2- - X BOUNDARY R155N888RB 668150 TCX-2-2201-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-018-448-C72K C3 . 20 X - - VERIFICATION BOUNDARY.

RI55N888RB 668200 TCX-2-2201-H12 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-018-449-C72R F1.20 X BOUNDARY RI55N888RB 668400 TCX-2-2201-H14 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-018-452-C52R Fl. 20 2 X - - BOUNDARY R154J859RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 107 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS _PRESERVICE

- YEAR FIRST SECOND THIRD I ASME PERIOD PERIOD PERIOD I SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE O U TAG E - -- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 21 **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-018-1303-2 668500 TCX-2-2201-H15 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-018-453-C52R Fl. 20 2- X BOUNDARY R154J856RB 668600 TCX-2-2201-H17 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-018-456-C52R F1.20 X - - - BOUNDARY R154J834RB 668700 TCX-2-2201-HI9 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-018-457-C42S F1.20 2 - X - BOUNDARY R154J827RB 668800 TCX-2-2201-H1 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-018-458-C42K F1.20 2 - X - BOUNDARY R154J828RB 668850 TCX-2-2201-H1 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-018-458-C42K C3 . 20 2 - X VERIFICATION BOUNDARY.

R154J828RB 668900 TCX-2-2201-H16 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-018-700-C52R Fl. 20 2 - X BOUNDARY Ri54JB55RB 669000 TCX-2-2201-H7 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-018-703-C72R FP .20 2 - X - BOUNDARY RI55N882RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 108 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE---- --- --

SUMMARY

EXAMINATION AREA CATGY- NOE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 18-FW-2-018-1303-2 669100 TCX-2-2201-H5 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-018-704-CG2R F1.20 2 - - x - - BOUNDARY R155N866RB 669150 TCX-2-2201-H5 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-0018-704-C62R C3 .20 2 - X - - VERIFICATION BOUNDARY.

RI55N866RB FEEDWATER 18-FW-2-019-1303-2 669200 TCX-2-2101-H12 F-A VT-3 NA SPRING. TDLR VERIFICATION FW-2-019-401-C42S Fl. 20 2 C - BOUNDARY RI00AB27RB 669300 TCX-2-2101-H8 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-0i9-402-C52S Fl. 20 2 C BOUNDARY R1541856RB 669400 TCX-2-2101-Hl F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-019-404-C42K F£. 20 2 C BOUNDARY R1541827RB 669450 TCX-2-2101-Hl C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-019-404-C42K C3 .20 2 C VERIFICATION BOUNDARY.

R1541827RB 669500 TCX-2-2101-H7 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-019-405-C52K Fl. 20 2 C - BOUNDARY R1541856RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 109 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI j------------ OUTAG----.-----------

SUMMARY

EXAMINATION AREA CATGY NDE TH .......- U T A G E 12.... INSTRUCTIONS ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION FEEDWATER 18-FW-2-019-1303-2 669600 TCX-2-2101-H2 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-019-406-C52R F1.20 2 C BOUNDARY RI0OA85ORB 669650 TCX-2-2101-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-019-406-C52R C3 .20 2 C - VERIFICATION BOUNDARY.

R154185ORB 669700 TCX-2-2101-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-019-408-S62R Fl. 20 2 C - BOUNDARY R100A856SB 669800 TCX-2-2101-HIO F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-019-411-C42K Fl. 20 2 C - BOUNDARY R1541827RB 669900 TCX-2-2101-Hl1 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-019-412-C42K F1.20 2 C BOUNDARY R1541828RB FEEDWATER 18-FW-2-020-1303-2 670000 TCX-2-2401-Hl F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-020-403-C42K F1. 20 X BOUNDARY 827RB 670010 TCX-2-2401-H7 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-020-402-C52S F1.20 2 2X BOUNDARY 827RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 110 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI --------------- I

SUMMARY

EXAMINATION AREA CATGY NDE - ---------- O U T A G E - --------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

-.-. - ---. ----. ---. --. - --. --- --- .- ---. i FEEDWATER 18-FW-2-020-1303-2 670050 TCX-2-2401-HN C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-020-403-C42K C3.20 2 - X - VERIFICATION BOUNDARY.

827RB 670100 TCX-2-2401-Hll F-A VT -3 NA SPRING. TDLR VERIFICATION FW-2-020-410-C42S Fl. 20 2 - - X BOUNDARY 827RB

.670110 TCX-2-2401-H8 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-020-407-C52K F1.20 2 - x BOUNDARY 827RB 670200 TCX-2-2401-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-020-413-S62R F1.20 2 - X BOUNDARY 856CRB 670300 TCX-2-2401-H2 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-020-700-C52R F£. 20 2 X BOUNDARY 842RB 670350 TCX-2-2401-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-020-700-C52R C3 . 20 2 X VERIFICATION BOUNDARY.

842RB 670400 TCX-2-2401-H1O F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-020-701-C42K F1. 20 */ - BOUNDARY 830RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: ill INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE----------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METN 1 2 1 23 1 2 -- CALIBRATION BLOCK**

FEEDWATER 6-FW-2-095-1303-2 671900 TCX-2-2103-H7 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-095-401-C62R F1.20 2 C - BOUNDARY R15SL64RB 672000 TCX-2-2103-H6 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-095-401-S62R F1.20 2 C - BOUNDARY RI008 70SB 672100 TCX-2-2102-H8 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-095-402-C62R Fl. 20 2 - - - X - - BOUNDARY 867RB 672400 TCX-2-2103-H3 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-095-404-S62R F1.20 2 C - BOUNDARY RI0B863SB 672500 TCX-2-2102-H13 F-A *VT-3 NA SPRING. 6 TDLR VERIFICATION FW-2-095-405-C62S Fl.20 2 - X BOUNDARY 871RB 672600 TCX-2-2102-H15 F-A VT- 3 NA STANCHION. TDLR VERIFICATION FW-2-095-408-C62S Fl. 20 2 - X BOUNDARY 871RB 672700 TCX-2-2102-H17 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-095-410-C62R F1. 20 2 - X BOUNDARY 8666RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 112 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ . PLAN STATUS _PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE-ISRCIN

SUMMARY

EXAMINATION AREA CATGY NDE 1 U T A G E -CA 2 INSTRUCTIONS 1 2 1 2 3 1 2 *CALIBRATION

- BLOCK**

NUMBER IDENTIFICATION ITEM NO METH FEEDWATER 6-FW-2-095-1303-2 672800 TCX-2-2102-H20 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-095-411-C62K Fl1 20 2 - - X BOUNDARY 862RB 672900 TCX-2-2102-H19 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-095-412-C62K F1.20 2 - - - X BOUNDARY 863RB 673000 TCX-2-2102-HI F-A VT -3 NA SPRING. TDLR VERIFICATION FW-2-095-413-C62S F1.20 2 - X BOUNDARY 869RB 673050 TCX-2-2102-H1 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-095-413-C62S C3 . 20 - X VERIFICATION BOUNDARY.

869RB 673100 TCX-2-2102-H16 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-095-414-C62K F1. 20 2 - - X - BOUNDARY 867RB 673200 TCX-2-2102-Hl8 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-095-415-C62K F1.20 2 - X BOUNDARY 865RB 673300 TCX-2-2102-HI4 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-095-702-C62K F1.20 2 - BOUNDARY 871RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 113 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE --------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 6IFWt2-095-1303-2 673400 TCX-2-2102-Hll F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-095-703-C62R Fl . 20 2 - - - X BOUNDARY 869RB 673500 TCX-2-2102-HI0 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-095-704-C62K Fl. 20 2 - - X BOUNDARY 867RB 673600 TCX-2-2103-H8 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-095-705-C62K F£. 20 2 - X - - BOUNDARY RI55L865RB FEEDWATER A-FW-2-096-1I03-2 673700 TCX-2-2203-H25 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-096-402-C62K Fl. 20 2 - X X BOUNDARY 866RB 673800 TCX-2-2203-H23 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-096-403-C62K Fl. 20 2 - - - X - BOUNDARY 866RB 673900 TCX-2-2203-121 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-096-407-C62S F1.20 BOUNDARY 86BRB 674000 TCX-2-2203-H18 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-096-409-C62K Fl. 20 X BOUNDARY 869RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 114 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD I.

ASME PERIOD PERIOD PERIOD SEC. XI -- I

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE

- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 *2 1 2 3 1 2 I **CALIBRATIOl N BLOCK--

FEEDWATER 6-FW-2-096-1303-2 674100 TCX-2-2203-H19 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-410-C62R F1.20 2 - X BOUNDARY 869RB 674200 TCX-2-2203-H14 F-A VT-3 NA STRUT. TDLR VERIFICATiON FW-2-096-416-C62R F1.20 2 - - - X BOUNDARY 880RB 674350 TCX-2-2203-H4 C-C MT 92

  • WELDED ATTACHMENT. TDLR FW-2-096-422-C62R C3 . 20 2 - - X - VERIFICATION BOUNDARY.

880RB 674400 TCX-2-2203-H12 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-423-C62R F1.20 2 - BOUNDARY, 88ORB 674500 TCX-2-2203-H11 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-424-C62R F1. 20 X i BOUNDARY B8ORB 674650 TCX-2-2203-H3 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-096-428-C62R C3 . 20 2 X VERIFICATION BOUNDARY.

874RB 674700 TCX-2-2203-H2 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-432-C62R Fl. 20 2 X BOUNDARY 867RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 115 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ _ _ -PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME ' I PERIOD PERIOD PERIOD SEC. XI I 2

SUMMARY

EXAMINATION AREA CATGY NDE ---- -OUTAGE INSTRUCTIONS 1 2 NUMBER IDENTIFICATION ITEM NO METH 1 2 **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-096-1303-2 674750 TCX-2-2203-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-096-432-C62R C3.20 2 - - - X - VERIFICATION BOUNDARY.

867RB 674800 TCX-2-2203-H8 F-A VT- 3 NA STRUT. TDLR VERIFICATION PW-2-096-433-C62R F1.20 2 - -X - BOUNDARY 868RB 674900 TCX-2-2203-H9 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-096-434-C62R Fl. 20 2 - - X BOUNDARY 868RB 675000 TCX-2-2203-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-435-C62R F1.20 2 x BOUNDARY 867RB 675100 TCX-2-2203-H7 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-096-436-C62R F1.20 x - BOUNDARY 867RB 675200 TCX-2-2204-Hll F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-439-C62R F1.20 2 - x - BOUNDARY 864RB 675300 TCX-2-2204-H8 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-096-442-S62R Fl. 20 x - BOUNDARY R100C863SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 116 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - - -OUTAGE INSTRUCTIONS I - 2 NUMBER IDENTIFICATION ITEM NO METH 1 2 3 12 I **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-096-1303-2 675600 TCX-2-2204-Hl F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-096-702-C62K Fl, 20 2 - - X BOUNDARY R155L864RB 675650 TCX-2-2204-Hl C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-096-702-C62K C3.20 X - VERIFICATION BOUNDARY.

R155LL64RB 675700 TCX-2-2203-HN F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-096-705-C62K Fl.20 2 - - - X - BOUNDARY 867RB 675750 TCX-2-2203-Hl C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-096-705-C62K C3.20 2 - - X - VERIFICATION BOUNDARY.

867RB 675800 TCX-2-2203-H24 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-096-707-C62S F1.20 2 x BOUNDARY 865RB 675900 TCX-2-2203-H22 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-096-708-CE2K Fl. 20 - - BOUNDARY 868RB 676000 TCX-2-2203-H15 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-096-709-C62R F1 . 20 -- - BOUNDARY 988ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 117 INSERVICE INSPECTION PLAN CLASS ,2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND T HIRD ASME .PERIOD PERIOD P'ERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE o U TA G E- - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATIO] N BLOCK**

FEEDWATER 6-FW-2-096-1303-2 676100 TCX-2-2203-H5 F-A VT -3 NA SNUBBER. TDLR VERIFICATION FW-2-096-710-C62K Fl. 20 2 - -X - BOUNDARY 88ORB 676150 TCX-2-2203-H5 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-096-710-C62K C3 . 20 2 - X - VERIFICATION BOUNDARY.

880RB 676300 TCX-2-2203-H17 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-096-712-C62R F1.20 2 - - - X- BOUNDARY 869RB 676400 TCX-2-2203-H20 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-096-713-C62K F1.20 - - X - BOUNDARY 869RB 676500 TCX-2-2204-H12 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-096-716-C62K F1.20 2 - X - BOUNDARY 864RB FEEDWATER 6-FW-2-097-1303-2 676600 TCX-2-2303-H9 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-401-S62R F1.20 X - BOUNDARY 863SB 676900 TCX-2-2302-H4 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-405-C62R Fl. 20 2 X - BOUNDARY 867RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 118 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE1-- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 23 1 2

    • CALIBRATION BLOCK**

FEEDWATER 6-FW-2-097-1303-2 677000 TCX-2-2302-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-408-C62R F1.20 X - BOUNDARY I 677050 TCX-2-2302-H7 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-412-C62R F1.20 X - BOUNDARY 677100 TCX-2-2302-H8 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-097-413-C62R F1.20 2 - X - BOUNDARY 877RB 677200 TCX-2-2302-H9. F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-097-416-C62R F1.20 - X BOUNDARY 880RB 677300 TCX-2-2302-HlO F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-417-C62R Fl . 20 2 - X BOUNDARY 880RB 677400 TCX-2-2302-H12 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-424-C62R F1.20 - X BOUNDARY 88ORB 677500 TCX-2-2302-H13 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-425-C62R F1.20 2 - X BOUNDARY 88ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 119 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR F IRST SECOND THIRD ASME I P ERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - 0 U -OUTAGE INSTRUCTIONS t t NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK FEEDWATER 6-FW-2-097-1303-2 677600 TCX-2-2302-H16 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-428-C62R F1.20 2 - - X - - BOUNDARY 876RB 677700 TCX-2-2302-H19 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-097-430-C62R Fl. 20 2 - X - BOUNDARY 86BRB 677800 TCX-2-2302-H18 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-431-C62R Fl. 20 2 - - X BOUNDARY 868RB 677900 TCX-2-2302-H20 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-433-C62R F1.20 2 - X - BOUNDARY I 868RB 678000 TCX-2-2302-H15 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-097-434-C62R Fl.20 2 - X - BOUNDARY 868RB 678100 TCX-2-2302-H21 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-097-435-C62S F1.20 - X - BOUNDARY 868RB 678200 TCX-2-2302-H22 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-097-436-C62K F1.20 X BOUNDARY 868RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 120 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -PLAN STATUS PRESERVICE YEAR L

J FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 11 2 1 2 3 '1 2 **CALIBRATION

- BLOCK**

FEEDWATER 6-FW-2-097-1303-2 678300 TCX-2-2302-H24 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-097-439-C62K Fl,.20 2 X - BOUNDARY 866RB 678400 TCX-2-2302-H27 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-097-441-C62K Fl. 20 2 - -X BOUNDARY 867RB 678500 TCX-2-2303-HI3 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-097-448-C62K Fl. 20 2 - X BOUNDARY 865RB 678600 TCX-2-2303-H14 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-449-C62R Fl1.20 2 - - X BOUNDARY 865RB 678620 TCX-2-2302-H23 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-097-451-C62K F1.20 2 - - - X BOUNDARY 865RB 678700 TCX-2-2302-H5 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-097-702-C62R F1.20 2 - X - BOUNDARY 866RB 678800 TCX-2-2302-Hl F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-703-C62R F1 .20 2 - X - BOUNDARY 866RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 121 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS - PRESERVICE YEAR FIRST SE COND THIRD ASME" PERIOD PE RIOD PERIOD SEC. XI I __-

SUMMARY

EXAMINATION AREA CATGY NDE i 0 U T A G E ----- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBPATIOI N BLOCK**

FEEDWATER 6-FW-2-097-1303-2 678840 TCX-2-2302-H2 C-C MT 92 BOX. TDLR VERIFICATION FW-2-097-418-C62R C3 .20 2 - X BOUNDARY.

88ORB 678845 TCX-2-2302-H2 F-A VT -3 NA WELDED ATTACHMENT. TDLR FW-2-097-418-C62R F1.20 2 - X - VERIFICATION BOUNDARY.

880RB 678850 TCX-2-2302-H1 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-097-703-C62R C3 .20 2 - X - VERIFICATION BOUNDARY.

866RB 678900 TCX-2-2302-H3 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-704-C62R F1.20 2 - X - BOUNDARY 866RB 679000 TCX-2-2302-HI7 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-097-706-C62R F1. 20 2 - X - BOUNDARY 868RB 679100 TCX-2-2302-H25 F-A VT- 3 NA SPRING. TDLR VERIFICATION FW-2-097-707-C62S F1.20 X - BOUNDARY 865RB 679200 TCX-2-2302-H26 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-097-708-C62K F1.20 X BOUNDARY 867RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 122 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I F IRST SECOND THIRD ASME I P ERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - 0 U T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-098-1303-2 679300 TCX-2-2403-H8 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-098-401-C62R F1.20 2 - - -X - BOUNDARY 864RB 679400 TCX-2-2402-H5 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-098-402-C62R Fl.20 - -X - BOUNDARY 866RB 679500 TCX-2-2402-H9 F-A VT-3 NA SPRING. TDLR VERIFICATION FW-2-098-408-C62S Fl. 20 2 - X - BOUNDARY 871RB 679600 TCX-2-2402-Hll F-A VT- 3 NA HANGER. TDLR VERIFICATION FW-2-098-411-C62S Fl. 20 2 - X - BOUNDARY 871RB 679700 TCX-2-2402-H13 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-098-412-C62K F1.20 2 - -X - BOUNDARY 864RB 679900 TCX-2-2402-H14 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-098-416-C62K F1.20 2 X BOUNDARY 862RB 680000 TCX-2-2402-H4 F-A VT -3 NA HANGER. TDLR VERIFICATION FW-2-098-417-C62S Fl. 20 2 - X X BOUNDARY 872RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 123 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ '_PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. xi OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-098-1303-2 680050 TCX-2-2402-H4 C-C MT 92 WELDED ATTACHMENT: TDLR FW-2-098-417-C62S C3 . 20 2 - X - VERIFICATION BOUNDARY.

872RB 680600 TCX-2-2402-Hl0 F-A ,VT-3 NA STRUT. TDLR VERIFICATION FW-2-098-423-C62R Fl. 20 2 - -- -X BOUNDARY 871RB 680700 TCX-2-2402-H8 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-098-424-C62R Fl.20 2 - X BOUNDARY 871RB 680800 TCX-2-2402-H3 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-098-704-C62K Fl. 20 2 - x - BOUNDARY 680850 TCX-2-2402-H3 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-098-704-C62K C3.20 X - VERIFICATION BOUNDARY.

872RB 680900 TCX-2-2402-H7 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-098-706-C62R F1.20 2 X BOUNDARY 868RB 681000 TCX-2-2402-H2 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-098-708-C62R F1. 20 2 - X - BOUNDARY 871RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 124 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I ERIOD PERIOD PERIOD SEC. XI -- -i- --- -- - -

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE INSTRUCTIONS I - 2 NUMBER IDENTIFICATION ITEM NO METH 1 2 3 1 2 i **CALIBRATION BLOCK*-

FEEDWATER 6-FW-2-098-1303-2 681050 TCX-2-2402-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-098-708-C62R C3.20 -- -X - VERIFICATION BOUNDARY.

871RB FEEDWATER 6-FW-2-099-1303-2 681100 TCX-2-2102-H7 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-099-402-C62K F1.20 2 - X BOUNDARY 868RB 681200 TCX-2-2102-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-099-405-C62R F1.20 2 - - - X - - BOUNDARY 869RB 681300 TCX-2-2102-H3 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-099-408-C62R F1. 20 2 - - X BOUNDARY 860RB 681400 TCX-2-2102-H4 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-099-700-C62K Fl.20 2 BOUNDARY 86ORB 681500 TCX-2-2102-H5 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-099-702-C62R F1.20 2 X BOUNDARY 867RB 681600 TCX-2-2102-H2 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION FW-2-099-703-C62K Fl.20. X BOUNDARY 86ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 125 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS 1

NUMBER IDENTIFICATION ITEM NO METH 2 1 2 3 12 I **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-100-1303-2 681700 TCX-2-2204-H13 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-100-401-C62R F1.20 2 - - - X BOUNDARY 863RB 681850 TCX-2-2204-H4 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-100-403-C62R C3 .20 2 - X - VERIFICATION BOUNDARY.

RIS5L863RB 681900 TCX-2-2204-H3 F-A VT-3 NA STRUT. TDLR VERIFICATION FW-2-100-406-C52R F1.20 2 - X - BOUNDARY R15SL857RB 681950 TCX-2-2204-H3 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-100-406-C52R C3 .20 2 - X - VERIFICATION BOUNDARY.

RI55L857RB 682050 TCX-2-2204-H2 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-1002 701-C52R C3 . 20 2 X - VERIFICATION BOUNDARY.

R155L855RB FEEDWATER 6-FW-2-101-1303-2 682100 TCX-2-2303-H6 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-101-401-C62R F1. 20 2- X BOUNDARY 863RB 682200 TCX-2-2303-H3 F-A .VT- 3 NA STRUT, TDLR VERIFICATION FW-2-101-403-C62R F1.20 2 X - BOUNDARY 863RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 126 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _PRESERVICE

- YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METN 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-101-1303-2 682250 TCX-2-2303-H3 C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-101-403-C62R C3 . 20 2 - - x - VERIFICATION BOUNDARY.

863RB

.682300 TCX-2-2303-H2 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-101-404-C52R F1.20 X - BOUNDARY 856RB" 682350 TCX-2-2303-H2 C-C MT 92 , WELDED ATTACHMENT. TDLR FW-2-101-404-C52R C3 .20 2 - - x - VERIFICATION BOUNDARY.

856RB 682400 TCX-2-2303-H5 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-101-405-C52R Fl. 20 2 - X - BOUNDARY 857RB 682500 TCX-2-2303-H4 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-101-406-C52R F1.20 2 - K BOUNDARY 855RB 682650 TCX-2-2303-Hl C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-101-700-C52R C3 . 20 2 VERIFICATION BOUNDARY.

855RB FEEDWATER 6-FW-2-102-1303-2 682700 TCX-2-2402-HI5 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-102-403-C62R F1.20 2 - - BOUNDARY.

868RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 127 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

FEEDWATER 6-FW-2-102-1303-2 682800 TCX-2-2402-H18 F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-102-404-C62R Fl. 20 - -X - BOUNDARY 868RB 682900 TCX-2-2402-Hl F-A VT -3 NA STRUT. TDLR VERIFICATION FW-2-102-700-C62R Fl. 20 2 - -- - - BOUNDARY 863RB 682950 TCX-2-2402-HI C-C MT 92 WELDED ATTACHMENT. TDLR FW-2-102-700-C62R C3 . 20 2 - X - VERIFICATION BOUNDARY.

863RB 683000 TCX-2-2402-H16 F-A VT-3 NA SNUBBER. TDLR VERIFICATION FW-2-102-702-C62K F1.20 2 - - - X - BOUNDARY, 868RB 683100 TCX-2-2402-H17 F-A VT- 3 NA STRUT. TDLR VERIFICATION FW-2-102-703-C62R Fl. 20 2 K - BOUNDARY 868RB MAIN STEAM 3-MS-2-003-1303-2 683200 TCX-2-2100-HG F-A VT -3 NA SPRING. TDLR VERIFICATION MS-2-001-402-C72S F1. 20 2 C - BOUNDARY R1550890RB 683400 TCX-2-2100-HI F-A VT -3 NA SNUBBER. TDLR VERIFICATION MS-2-001-405-C72K F1.20 2C - BOUNDARY RI55089ORB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 128 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

MAIN STEAM 32-MS-2-001-1303-2 683450 TCX-2-2100-Hl C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-001-405-C72K C3 .20 2 C VERIFICATION BOUNDARY.

R1550890RB "MAIN STEAM 32-MS-2-002-1303-2 684400 TCX-2-2200-H2 F-A VT -3 NA SNUBBER. TDLR VERIFICATION MS-2-002-408-C72K F1.20 2 - X - BOUNDARY RI55N90ORB 684450 TCX-2-2200-H2 C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-002-408-C72K C3.20 2 - X VERIFICATION BOUNDARY.

R155N900RB 684500 TCX-2-2200-H1 F-A VT-i NA SNUBBER. TDLR VERIFICATION MS-2-002-411-C72K F1.20 2 X - - BOUNDARY R155N900RB 684550 TCX-2-2200-HI C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-002-411-C72K C3 . 20 2 - X VERIFICATION BOUNDARY.

RI55N90ORB MAIN STEAM 32-MS-2-003-1303-2 685100 TCX-2-2300-H7 F-A VT -3 NA U-BOLT. TDLR VERIFICATION MS-2-003-402-C72S F1.20 X BOUNDARY 894RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 129 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD I

SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 -- 1-- U 2 T A---3 1 2 I **CALIBRATION BLOCK**

MAIN STEAM 32-MS-2-003-1303-2 685200 TCX-2-2300-Hl F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-003-405-C72K Fl. 20 2 S- X - - BOUNDARY 894RB*

685250 TCX-2-2300-H1 C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-003-405-C72K C3.20 2 - - - X VERIFICATION BOUNDARY.

894RB 685400 TCX-2-2300-H2 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-003-407-C72K F1.20 2 - - - X BOUNDARY 896RB 685450 TCX-2-2300-H2 C-C MT 92. WELDED ATTACHMENT. TDLR MS-2-003-407-C72K C3 .20 2 - - - X - - VERIFICATION BOUNDARY.

896RB 685500 TCX-2-2300-H3 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-003-409-C72K Fl. 20 .- - X BOUNDARY 894RB 685550 TCX-2-2300-H3 C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-003-409-C72K C3.20 - X VERIFICATION BOUNDARY.

894RB 685600 TCX-2-2300-H4 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-003-410-C72K F1. 20 - X BOUNDARY 894RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 130 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STAT us PRESERVICE YEAR

  • FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I---------- OUTA

SUMMARY

EXAMINATION AREA CATGY NDE -- ----------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 12. 2 **CALIBRATION BLOCK**

MAIN STEAM 32-MS-2-003-1303-2 685650 TCX-2-2300-H4 C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-003-410-C72K C3.20 2 - X VERIFICATION BOUNDARY.

894RB MAIN STEAM 32-MS-2-004-1303-2 686200 TCX-2-2400-H9 F-A VT -3 NA SPRING. TDLR VERIFICATION MS-2-004-403-C72S F1.20 2 - - X BOUNDARY 877RB 686600 TCX-2-2400-Hl F-A VT -3 NA SNUBBER. TDLR VERIFICATION MS-2-004-407-C72K F1.20 2 X BOUNDARY 890RB 686650 TCX-2-2400-Hl C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-004-407-C72K C3 . 20 2 VERIFICATION BOUNDARY.

890RB 686800 TCX-2-2400-H2 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-004-409-C72K F1.20 2 - - X BOUNDARY 884RB 686850 TCX-2-2400-H2 C-C MT 92 WELDED ATTACHMENT. TDLR MS-2-004-409-C72K C3 . 20 X VERIFICATION BOUNDARY.

884RB 686900 TCX-2-2400-HIl F-A VT -3 NA STRUT. TDLR VERIFICATION MS-2-004-415-S72R F1.20 X BOUNDARY 877SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 131 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

MAIN STEAM 8-MS-2-240-1303-2 687300 TCX-2-2200-H12 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-240-401-S72K F1.20 2 - X - BOUNDARY R109C885SB 687400 TCX-2-2200-H13 F-A VT- 3 NA SNUBBER. TDLR VERIFICATION MS-2-240-402-S72K Fl.20 2 - X. - BOUNDARY R109C885SB RESIDUAL HEAT REMOVAL 12-RH-2-004-601R-2 688400 TCX-2-2501-Hl F-A VT- 3 NA STRUT RH-2-004-403-S42R Fl. 20 2- - X

. 813SB 688450 TCX-2-2501-Hl C-C PT 92 WELDED ATTACHMENT RH-2-004-403-S42R C3 . 20 2 - X 813SB 688700 TCX-2-2501-H12 F-A VT -3 NA SPRING RH-2-004-407-S32S Fl. 20 - X 803SB 688900 TCX-2-2501-H14 F-A VT- 3 INA STRUT RH-2-004-409-S32R Fl. 20 2 - X 800SB RESIDUAL HEAT REMOVAL 16-RH-2-007L601R-2 689000 TCX-2-2500-Hl F-A VT- 3 NA SNUBBER RH-2-007-405-S22K F1. 20 775SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 132 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI SCATG NDE------------- -------

OU AG---------------

SUMMARY

EXAMINATION AREA CATGY NODE 0 U T A G E I INSTRUCTIONS ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION RESIDUAL HEAT REMOVAL 16-RH-2-007-601R-2 689050 TCX-2-2500-Hl C-C PT 92 WELDED ATTACHMENT RH-2-007-405-S22K C3.20 2 - - - - x 775SB RESIDUAL HEAT REMOVAL 16-RH-2-008-601R-2 689400 TCX-2-2501-H15 F-A VT- 3 NA STRUT RH-2-008-402-S22R Fl. 20 - - - -X 787SB 689600 TCX-2-2501-H2 F-A VT- 3 NA SNUBBER RH-2-008-405-S22K Fl. 20 2 - X 784SB 689650 TCX-2-2501-H2 C-C PT 92 WELDED ATTACHMENT RH-2-008-405-S22K C3.20 2 - - X 784SB 689800 TCX-2-2501-H19 F-A VT -3 NA SPRING RH-2-008-407-S22S F1. 20 2 - - - - -X 774SB RESIDUAL HEAT REMOVAL 8-RH-2-028-151R-2 693500 TCX-2-2579-HI F-A VT -3 NA BOX RH-2-028-402-S32A Fl.20 2 - C R070 806SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 133 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL 8-RH-2-028-151R-2 693550 TCX-2-2579-Hl C-C PT 92 WELDED ATTACHMENT RH-2-028-402-S32A C3.20 2 - C R070 806SB 693600 TCX-2-2579-H5 F-A VT -3 NA SNUBBER RH-2-028-404-S32K Fl. 20 2 - C R076 806SB SAFETY INJECTION 4-SI-2-001-2501R-2 696300 TCX-2-2564-H13 F-A VT-3 NA SNUBBER SI-2-001-424-S42K Fl. 20 2 C -

R77N 827SB SAFETY INJECTION 4-SI-2-021-2501R-2 697000 TCX-2-2564-HI7 F-A VT-3 NA SPRING SI-2-021-404-S42S Fl. 20 2 C -

R77N 812SB SAFETY INJECTION 24-SI-2-029-151R-2 697100 TCX-2-2580-H19 F-A VT-3 NA qTPTIT SI-2-029-406-Y32R Fl. 20 2 - C R085D802YD 697400 TCX-2-2580-H3 F-A VT- 3 NA STRUT SI-2-029-409-$32R Fl. 20 2 - C ROBD0802SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 134 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-- - U-T-A-G- E-------------- -

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 24-SI-2-029-151R-2 697450 TCX-2-2580-H3 C-C PT 92 WELDED ATTACHMENT SI-2-029-409-$32R C3 . 20 2 -C R085D802SB 697700 TCX-2-2580-H1 F-A VT- 3 NA BOX SI-2-029-415-Y32R F1.20 2 - C R085D802YD 697750 TCX-2-2580-H1 C-C PT 92 WELDED ATTACHMENT SI-2-029-415-Y32R C3 .20 2 - C R085DB02YD 697800 TCX-2-2580-H2 F-A VT-3 NA SNUBBER SI-2-029-424-Y32K Fl.20 2 - C R085D802YD 697850 TCX-2-2580-H2 C-C PT 92 WELDED ATTACHMENT SI-2-029-424-Y32K C3 . 20 2 - C R085D802YD SAFETY INJECTION 18-SI-2-030-151R-2 698400 TCX-2-2579-H7 F-A VT-3 NA STRUT SI-2-030-401-$32R F1. 20 2 - C R070 802SB 698500 TCX-2-2579-H3 F-A VT- 3 NA BOX SI-2-030-402-$32A Fl . 20 2 - C R070 802SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 135 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 18-SI-2-030-151R-2 698550 TCX-2-2579-H3 C-C PT 92 WELDED ATTACHMENT SI-2-030-402-S32A C3.20 2 - C R070 802SB SAFETY INJECTION 12-SI-2-031-151R-2 698950 TCX-2-2582-Hl C-C PT 92 WELDED ATTACHMENT SI-2-031-425-Y32R C3 .20 X -

802YD 699000 TCX-2-2582-H2 F-A VT-3 NA SNUBBER SI-2-031-429-S32K F1.20 2 - X -

803SB 699050 TCX-2-2582-H2 C-C PT 92 WELDED ATTACHMENT SI-2-031-429-S32K C3.20 2 - X -

803SB 699100 TCX-2-2582-H3 F-A VT -3 NA BOX SI-2-031-430-S32A F1.20 2 - X 803SB 699150 TCX-2-2582-H3 C-C PT 92 WELDED ATTACHMENT SI-2-031-430-S32A C3 .20 2 X -

803SB 699200 TCX-2-2582-H24 F-A VT- 3 NA STRUT SI-2-031-431-$32R F1 .20 X -

802AR

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 136 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 12-SI-2-031-151R-2 699400 TCX-2-2583-Hl F-A VT-3 NA SNUBBER SI-2-031-439-A32K Fl. 20 2 -- -X 803AB 699450 TCX-2-2583-Hl C-C PT 92 WELDED ATTACHMENT SI-2-031-439-A32K C3 .20 2 - X -

803AB SAFETY INJECTION B-SI-2-032-151R-2 699600 TCX-2-2579-H2 F-A VT- 3 NA STRUT SI-2-032-402-$32R Fl. 20 2 - C R070 794SB 699650 TCX-2-2579-H2 C-C PT 92 WELDED ATTACHMENT SI-2-032-402-$32R C3 .20 2 - C R070 794SB SAFETY INJECTION 4-SI-2-044-1501R-2 702500 TCX-2-2562-H4 F-A VT-3, NA SPRING SI-2-044-402-S22S Fl. 20 X -

R062 785SB 703800 TCX-2-2561-H2 F-A VT- 3 NA STRUT SI-2-044-426-S42R Fl.20 X - - -

I077B820SB

C DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 137 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

OUTAG--

SUMMARY

EXAMINATION AREA CATGY NDE 2 0 U TAG E INSTRUCTIONS NUMBER ITEM NO METH S1 2 1 2 3 2 IDENTIFICATION **CALIBRATION B LOCK**

SAFETY INJECTION 4-SI-2-044-1501R-2 703850 TCX-2-2561-H2 C-C PT 92 WELDED ATTACHMENT SI-2-044-426-$42R C3 .20 2 - X - -

R077B820SB 704450 TCX-2-2562-Hl C-C PT 92 WELDED ATTACHMENT SI-2-044-700-$22R C3 . 20 2 - X R062E788SB SAFETY INJECTION 3-SI-2-050-1501R-2 706900 TCX-2-2565-Hl F-A VT- 3 NA STRUT SI-2-050-402-$22R F1.20 2 C R67 788SB SAFETY INJECTION 4-SI-2-051-2501R-2 707500 TCX-2-2560-H3 F-A VT-3 NA STRUT SI-2-051-408-C42R Fl. 20 2 - X R154B820RB 707550 TCX-2-2560-H3 C-C PT 92 WELDED ATTACHMENT SI-2-051-408-C42R C3 .20 X - -

Ri54BB20RB 707900 TCX-2-2560-H2 F-A VT- 3 NA STRUT SI-2-051-414-C42R F1.20 2 N R154B820RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 138 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI GE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G E 12.... i INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 -- ---

2T A3 1 2 I **CALIBRATION BLOCK**

SAFETY INJECTION 4-SI-2-051-2501R-2 707950 TCX-2-2560-H2 C-C PT 92 WELDED ATTACHMENT SI-2-051-414-C42R C3.20 X -

R154B820RB 708000 TCX-2-2560-Hl F-A VT- 3 NA SNUBBER SI-2-051-415-C42K Fl. 20 2 - X - -

RI54B820RB 708050 TCX-2-2560-HI C-C PT 92 WELDED ATTACHMENT SI-2-051-415-C42K C3 .20 2 - X R154B82ORB 708500 TCX-2-2560-H4 F-A VT- 3 NA STRUT SI-2-051-421-C42R Fl. 20 X -

R154B82ORB 708550 TCX-2-2560-H4 C-C PT 92 WELDED ATTACHMENT SI-2-051-421-C42R C3.20 2 - X - -

R154B820RB SAFETY INJECTION 14-ST-2-071-601R-2 710100 TCX-2-2581-Hll F-A VT- 3 NA STRUT SI-2-071-402-$32R Fl. 20 2 - X 792SB 710200 TCX-2-2581-H12 F-A VT- 3 NA SPRING SI-2-071-403-S32S F1.20 X 792SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 139 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

- -- I

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 O-U-T-A-- E 1 2 **CALIBRATION BLOCK-*

SAFETY INJECTION 14-SI-2-071-601R-2 710300 TCX-2-2581-H13 F-A VT-3 NA SNUBBER SI-2-071-404-S32K Fl. 20 2 - - X 791SB 710400 TCX-2-2581-H2 F-A VT- 3 NA SNUBBER SI-2-071-405-$32K Fl.20 2 - X 791SB 710450 TCX-2-2581-H2 C-C PT 92 WELDED ATTACHMENT SI-2-071-405-S32K C3.20 2 X 791SB SAFETY INJECTION 14-SI-2-072-601R-2 710500 TCX-2-2581-H1 F-A VT-3 NA BOX SI-2-072-401-$32R Fl. 20 2 - X 792SB 710550 TCX-2-2581-H1 C-C PT 92 WELDED ATTACHMENT SI-2-072-401-S32R C3.20 - - - X 792SB SAFETY INJECTION 16-SI-2-075-6O1R-2 710B60 TCX-2-2501-H4 F-A VT-3 NA SNUBBER SI-2-075-401-S22K F1. 20 2 C -

R63 790SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 140 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE--------------

SUMMARY

EXAMINATION AREA CATGY NDE -I-- --- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 112 1 2 3 1 2 I **CALIBRATION BLOCK**

SAFETY INJECTION 10-SI-2-082-2501R-2 713200 TCX-2-2533-H7 F-A VT -3 NA SNUBBER SI-2-082-402-C42K Fl. 20 2 C R154A82ORB SAFETY INJECTION 8-SI-2-087-2501R-2 713400 TCX-2-2533-H3 F-A VT -3 NA STRUT SI-2-087-404-C42R F1.20 2 C -

R154A820RB 713450+ TCX-2-2533-H3 C-C PT 92 WELDED ATTACHMENT SI-2-087-404-C42R C3 . 20 2 C -

R154AB20RB 713500 TCX-2-2533-H4 F-A VT-3 NA STRUT SI-2-087-405-C42R F1. 20 2 C Ri54A82ORB 713550 TCX-2-2533-H4 C-C PT 92 WELDED ATTACHMENT SI-2-087-405-C42R C3 .20 2 C R154A820RB 713800 TCX-2-2533-H5 F-A VT- 3 NA STRUT SI-2-087-409-C42R F1. 20 2 C RI54A820RB 713850 TCX-2-2533-H5 C-C PT 92 WELDED ATTACHMENT SI-2-087-409-C42R C3 . 20 2C R154A820RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 141 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I--------- OUTAGE

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I /**CALIBRATION BLOCK--

SAFETY INJECTION 8-SI-2-087-2501R-2 714000 TCX-2-2533-Hl F-A VT -3 NA SNUBBER SI-2-087-411-C42K Fl. 20 2 C R154A820RB 714050 TCX-2-2533-Hl C-C PT 92 WELDED ATTACHMENT SI-2-087-411-C42K C3 .20 2 C -

R154A82DRB 714100 TCX-2-2533-H2 F-A VT -3 NA SNUBBER SI-2-087-412-C42K Fl. 20 2 C R154A820RB 714150 TCX-2-2533-H2 C-C PT 92 WELDED ATTACHMENT SI-2-087-412-C42K C3.20 2 C R154A820RB 714500 TCX-2-2533-H6 F-A VT -3 NA SNUBBER SI-2-087-416-C42K F1.20 2 C R154A820RB 714550 TCX-2-2533-H6 C-C PT 92 WELDED ATTACHMENT SI-2-087-416-C42K C3.20 2 C RI54A820RB SAFETY INJECTION 8-SI-2-D88-2501R-2 715200 TCX-2-2534-HI F-A VT- 3 NA SNUBBER SI-2-088-409-C42K Fl. 20 2 - C R154D817RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 142 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSP ECTION INTERVAL __PLAN STATUS PRESERVICE YEAR F FIRST SECOND THIRD ASME J PERIOD PERIOD PERIOD SEC. XI I . . . . . . . . . . .

SCATG ND----------------- --OUTAGE--

SUMMARY

EXAMINATION AREA CATGY NDE T ...... 0 U T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 8-SI-2-088-2501R-2 715250 TCX-2-2534-Hl C-C PT 92 WELDED ATTACHMENT 9I-2-088-409-C42K C3.20 2 - C - - -

9154D817RB 715300 TCX-2-2534-H2 F-A VT-3 NA SNUBBER SI-2-088-410-C42K F1.20 2 - C R154D817RB 715350 TCX-2-2534-H2 C-C PT 92 WELDED ATTACHMENT SI-2-088-410-C42K C3 .20 2 - C R154D817RB SAFETY INJECTION 10-SI-2-095-2501R-2 716500 TCX-2-2530-H1 F-A VT- 3 NA STRUT SI-2-095-403-$42R Fl. 20 2 C -

Z77N 823SB 716550 TCX-2-2530-H1 C-C PT 92 WELDED ATTACHMENT' SI-2-095-403-$42R C3.20 2 C -

R77N 823SB 717100 TCX-2-2535-H2 F-A VT-3 NA STRUT SI-2-095-409-C42R F1.20 X 823RB 717150 TCX-2-2535-H2 C-C PT 92 WELDED ATTACHMENT SI-2-095-409-C42R C3.20 2 - X -

823RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 143 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 10-SI-2-095-2501R-2 717500 TCX-2-2535-H1 F-A VT-3 NA STRUT SI-2-095-415-C42R F1.20 - -X -

823RB 717550 TCX-2-2535-HI C-C PT 92 WELDED ATTACHMENT SI-2-095-415-C42R C3.20 - - - X -

823RB SAFETY INJECTION r-SI-2-171-2501R-2 717700 TCX-2-2535-H3 F-A VT-3 NA STRUT SI-2-171-401-C42R Fl. 20 X -

823RB 717750 TCX-2-2535-H3 C-C PT 92 WELDED ATTACHMENT SI-2-171-401-C42R C3.20 2 - - -X 823RB SAFETY INJECTION 4-SI-2-00-1501R-2 718100 TCX-2-2561-Hl F-A VT- 3 NA BOX .

SI-2-300-404-S22A F1.20 X - -

R067 789SB 718150 TCX-2-2561-HI C-C PT 92 WELDED ATTACHMENT SI-2-300-404-$22A C3. 20 2 X -

R067 789SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 144 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS _ PRESERVICE YEAR FIRST SECOND THIRD I ASME PERIOD PERIOD PERIOD I SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G

- I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 .2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 4-SI-2-306-2501R-2 718200 TCX-2-2566-H18 F-A VT- 3 NA STRUT SI-2-306-401-C42R Fl.20 2 C -

R154B817RB 718300 TCX-2-2566-RIl F-A VT- 3 NA STRUT SI-2-306-402-C42R Fl. 20 2 C -

RI54B817RB 718400 TCX-2-2566-H8 F-A VT-3 NA STRUT SI-2-306-403-C42R F1.20 2 C -

RI54B817RB 718500 TCX-2-2566-Hl F-A VT-3 NA STRUT SI-2-306-404-C42R Fl. 20 2 C -

Ri54B823RB 718550 TCX-2-2566-Hl C-C PT 92 WELDED ATTACHMENT SI-2-306-404-C42R C3 . 20 2 C -

RI54B823RB 718600 TCX-2-2566-H9 F-A VT- 3 NA STRUT SI-2-306-405-C42R Fl. 20 2 C R154B817RB 718700 TCX-2-2566-H12 F-A VT -3 NA STRUT SI-2-306-406-C42R F1.20 2 C R154B817RB

DATEý 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 145 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC.. XI CATGY NDE - OUTAGE------------

SUMMARY

EXAMINATION AREA INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 -- CALIBRATION BLOCK-SAFETY INJECTION 4-SI-2-306-2501R-2 718800 TCX-2-2566-HI6 F-A VT -3 NA STRUT SI-2-306-407-C42R Fl. 20 2 C -

R154B817RB 718900 TCX-2-2566-H20 F-A VT- 3 NA STRUT SI-2-306-408-C42R Fl. 20 2 C -

RI54B817RB 719000 TCX-2-2566-H24 F-A VT- 3 NA STRUT SI-2-306-410-C42R F1.20 2 C R154B817RB 719400 TCX-2-2566-H6 F-A VT- 3 NA SNUBBER SI-2-306-414-C42K F1.20 2 C R154B818RB 719600 TCX-2-2566-H2 F-A VT- 3 NA STRUT SI-2-306-416-C42R Fl. 20 2 C -

R154B817RB 719650 TCX-2-2566-H2 C-C PT 92 WELDED ATTACHMENT SI-2-306 -416 -C42R C3 .20 2 C RI54B817RB 719900 xTCX-2-2566-H3 F-A VT-3 NA STRUT SI-2-306-420-C42R Fl.20 2 C -

R154B817RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 146 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SAFETY INJECTION 4-SI-2-306-2501R-2 719950 TCX-2-2566-H3 C-C PT 92 WELDED ATTACHMENT SI-2-306-420-C42R C3.20 2 C -

RI54B817RB SAFETY INJECTION I1-qI-2-325-G01R-2 721200 TCX-2-2501-N3 F-A VT-3 NA STRUT SI-2-325-700-$32R Fl. 20 2 C -

R63 803SB SAFETY INJECTION 16-SI-2-326-2501R-2 721210 TCX-2-2500-H2 F-A VT- 3 NA STRUT SI-2-326-401-532R Fl. 20 2 - X 798SB SAFETY INJECTION 3-SI-2-336-1501R-2 721300 TCX-2-2563-HIO F-A VT -3 NA SNUBBER SI-2-336-403-$22K Fl. 20 2 - X R066 789SB SAFETY INJECTION 16-SI-2-914-151R-2 721700 TCX-2-2579-H4 F-A VT- 3 NA BOX SI-2-914-402-$32A Fl. 20 2 - C R075 802SB 721750 TCX-2-2579-H4 C-C PT 92 WELDED ATTACHMENT SI-2-914-402-532A C3.20 2 - C R075 802SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 147 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SEC OND THIRD ASME PERIOD PER ioD PERIOD SEC. XI AGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE OUT INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CAVTYrm TN.Trr'TfNN 9qT-9r)C0-2Rnl P-9 SAFETY INJECTION 2-SI-2-066-2501R-2 721900 TCX-2-2566-H41 F-A VT- 3 NA SNUBBER SI-2-RB-010A-702-2 Fl. 20 2 C -

R154B815RB 722100 TCX-2-2566-H43 F-A VT-3 NA STRUT SI-2-RB-O1OA-704-2 F1.20 2 C -

R154B815RB SAFETY INJECTION 2-SI-2-064-25D1R-2 722200 TCX-2-2566-H44 F-A VT- 3 NA SNUBBER SI-2-RB-010B-701-2 F1.20 2 C -

R154B813RB 722300 TCX-2-2566-H45 F-A VT- 3 NA SNUBBER SI-2-RB-01OB-703-2 F1.20 2 C RI54B812RB SAFETY INJECTION 2-SI-2-068-2501R-2 725300 TCX-2-2566A-H1O F-A VT -3 NA U-BOLT SI-2-RB-058-704-2 Fl. 20 2 C R154D821RR FEEDWATER 18-FW-2-036-2003-2 750000 TCX-2-2101-MR1 F-A VT -3 NA MOMENT RESTRAINT DWG S2-0681 CP2-FWSSMR-01 F1. 40 2 C -

RI0OA856SB

DATE: 01/21/08

  • COMANCHE PEAK UNIT 2 PAGE: 148 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

MAIN STEAM 32-MS-2-001-1303-2 750400 TCX-2-2100-MR1 F-A VT- 3 NA MOMENT RESTRAINT DWG S2-0684 CP2-MSMEMR-01 Fl.40 2 C -

R108 877SB RESIDUAL HEAT REMOVAL TCX-RHAHRS-01 750800 TCX-2-1120-1S1 F-A VT -3 NA DWG 2323-S2-0654 RHR HX 01 TOP SUPPORTS Fl.40 2 - - - - -X R89 828SB 750900 TCX-2-112D-1S2 F-A VT-3 NA DWG 2323-S2-0654 RHR HX 01 INTERMEDIATE Fl.40 2 - - - - X SUPPORTS R69 810SB 751000 TCX-2-1120-1S3 F-A VT- 3 NA DWG 2323-S2-0654 RHR HX 01 FOUNDATION SUPPORTS F1.40 2 - - X R69 795SB RESIDUAL HEAT REMOVAL TCX-RHAPRH-01 751401 TCX-2-3100-1-1WS F-A VT-3 NA FEET. DWG C-8X20WDF86X16D. 1S1 RHR PUMP 01 SUPPORT F1.40D 2 - C SPLIT INTO 3(1-1WS,1-2WS, AND R53 773SB l-3WS EXAMS.)

751402 TCX-2-3100-1-2WS F-A VT -3 NA FEET. DWG C-8X20WDF86Xl6D. IS1 RHR PUMP 01 SUPPORT Fl.40 2 - C SPLIT INTO 3(l-lWS,l-2WS, AND R53 773SB 1-3WS EXAMS.)

DATE: .01/21/08 COMANCHE PEAK UNIT 2 PAGE: 149 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI .------------------------------

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE 0 U INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3, 1 2 **CALIBRATION BLOCK**

RESIDUAL HEAT REMOVAL TCX-RHAPRH-01 751403 TCX-2-3100-1-3WS F-A VT-3 NA FEET. DWG C-8X20WDF8GXlID. 151 RHR PUMP 01 SUPPORT Fl.40 2 - C SPLIT INTO 3(1-IWS,I-2WS, AND R53 773SB l-3WS EXAMS.)

SAFETY INJECTION TCX-SIAPSI-02 751700 TCX-2-3140-1S1 F-A VT- 3 NA FEET. DWG 300-J49738 SI PUMP 02 SUPPORT Fl. 40 2 X - -

R060 773SB CHEMICAL & VOLUME CONTROL TCX-CSAPCH-01 751800 TCX-2-3110-lS1 F-A VT-3 NA SUPPORT CRADLE. DWG B49745 CENTRIFUGAL CHARGING PUMP 01 F1.40 2 - X R195 810AB CONTAINMENT SPRAY CP2-CTAHCS-01 752000 TCX-2-1180-1S1 F-A VT-3 NA DWG. 2323-S2-0654 CT HX 01 TOP SUPPORTS F1.40 2 X R69' 828SB 752100 TCX-2-1180-1S2 F-A VT-S3 NA DWG. 2323-S2-0654 CT HX 01 INTERMEDIATE SUPPORTS F1.40 2 - X R69 810SB 752200 TCX-2-1180-1S3 F-A VT-3 NA DWG. 2323-S2-0654 CT HX 01 FOUNDATION SUPPORTS F1.40 - X -

R69 79SSB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 150 INSERVICE INSPECTION PLAN CLASS 2 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE - - OUTAGE - - - - _ J- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

CONTAINMENT SPRAY CP2-CTAPCS-02 752700 TCX-2-2578-2PS1 F-A VT-3 NA SUPPORT CRADLE. DWG CT PUMP 02 SUPPORT F1.40 X - - 15210085/88 R51 773SB CHEMICAL & VOLUME CONTROL TCX-CSAHRG-01 753000 TCX-2-1150-1S1 F-A VT-3 NA DWG D-4314-4, 3 SUPPORTS REGENERATIVE HX 01 SUPPORT F1.40 2 - x - - - -

RI55C833RB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 151 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE ------

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK--

AUXILIARY FEEDWATER 810500 AF-2-SB-001-H6 F-A VT- 3 NA STRUT AF-2-001-428-S33R FI.30 2 C 2-074 810550 AF-2rSB-001-H6 D-A VT-1 NA WELDED ATTACHMENT AF-2-001-428-S33R D1.20 2 C -

2-074 810700 AF-2-SB-001-H8 F-A VT- 3 NA STRUT AF-2-059-401-S33R Fl.30 2 C -

2-074 811800 AF-2-SB-002-H9 F-A VT-3 NA STRUT AF-2-002-439-S23R F1.30 2 C 811850 AF-2-SB-002-H9 D-A VT-1 NA WELDED ATTACHMENT AF-2-002-439-S23R D1.20 2 C -

811900 AF-2-SB-003-H1 F-A VT-3 NA STRUT AF-2-035-402-S33R F1.30 X -

2-073 812250 AF-2-SB-003-H4 D-A ' VT-i NA WELDED ATTACHMENT AF-2-035-428-S33R D1 . 20 2 - X -

2-070

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 152 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD I

ASME PERIOD PERIOD PERIOD SEC. XI I -

SUMMARY

EXAMINATION AREA CATGY NDE I- 2 U T A G E- - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH Ii 2 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 812400 AF-2-SB-003-H6 F-A VT-3 NA BOX AF-2-035-700-S33A Fl. 30 2 - -- -X -

2-074 812450 AF-2-SB-003-H6 D-A VT-i NA WELDED ATTACHMENT AF-2-035-700-S33A Dl. 20 X -

2-074 812460 AF-2-SB-003-H7 F-A VT- 3 NA BOX AF-2-035-424-S33A Fl. 30 2 - - -X -

R074 808SB 812470 AF-2-SB-003-H7 D-A VT- i NA WELDED ATTACHMENT AF-2-035-424-S33A D1.20 2 - - X -

R074 808SB 812500 AF-2-SB-004-H1 F-A VT- 3 NA STRUT AF-2-003-402-S33R F1.30 2 - -- -X 2-072 812600 AF-2-SB-004-H2 F-A VT- 3 NA STRUT AF-2-003-404-S33R Fl. 30 - X -

2-071 812700 AF-2-SB-004-H3 ' F-A VT- 3 NA FRAME AF-2-003-407-S33A F1 .30 -- - -

2-072

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 153 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUTAGE-----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 812750 AF-2-SB-004-H3 D-A VT-i NA WELDED ATTACHMENT AF-2-003-407-S33A D0. 20 2 2-072 812800 AF-2-SB-004-H4 F-A VT- 3 NA STRUT AF-2-058-407-S33R F1.30 2 - - -X 2-072 812900 AF-2-SB-005-H1 F-A VT -3 NA STRUT AF-2-003-405-S33R F1.30 2 - - X -

2-071 813000 AF-2-SB-005-H2 F-A VT- 3 NA STRUT AF-2-003-406-S33R Fl. 30 2 - - - X -

2-071 814000 AF-2-SB-006-H4 F-A VT- 3 NA BOX AF-2-004-405-S33A Fl. 30 2 C -

2-073 814050 AF-2-SB-006-H4 D-A VT-1 NA WELDED ATTACHMENT AF-2-004-405-S33A D1.20 2 C 2-073 814800 AF-2-SB-010-H2 F-A VT- 3 NA BOX AF-2-006-412-S33A F1.30 2 C 2-074

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 154 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ - PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME, PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE 'INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 814850 AF-2-SB-010-H2 D-A VT- 1 NA WELDED ATTACHMENT AF-2-.006-412-S33A Dl. 20 2 C -

2-074 815000 AF-2-SB-011-H2 , F-A VT -3 NA BOX AF-2-005-700-S33A F£.30 2 C -

2-070 815050 AF-2-SB-011-H2 D-A VT-1 NA WELDED ATTACHMENT AF-2-005-700-S33A Dl. 20 2 C 2-070 815100 AF-2-SB-011-H3 F-A VT- 3 NA BOX AF-2-084-401-S33A F1.30 2 C -

2-070 815150 AF-2-SB-011-H3 D-A VT-i NA WELDED ATTACHMENT AF-2-084-401-S33A D1.20 2 C -

2-070 815500 AF-2-SB-012-H4 F-A VT -3 NA BOX

- AF-2-010-403-S33A F£. 30 2 C -

2-072 815550 AF-2-SB-012-H4 D-A VT-1 NA WELDED ATTACHMENT AF-2-010-403-S33A D1.20 2 C -

2-072

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 155 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION. INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OU- TAGF------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS' NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3/ 1 2 **CALIBRATION

- BLOCK**

AUXILIARY FEEDWATER-816600 AF-2-SB-013-H7 F-A VT -3 NA BOX AF-2-009-413-S33A Fl. 30 2 C 2-073 816650 AF-2-SB-013-H7 D-A VT-1 NA WELDED ATTACHMENT AF-2-009-413-S33A Dl,. 20 2 C -

2-073 816800 AF-2-SB-014-HI F-A VT- 3 NA BOX AF-2-061-401-S33A Fl. 30 2 C -

2-072 816850 AF-2-SB-014-H1 D-A VT-i NA WELDED ATTACHMENT AF-2-061-401-S33A D1.20 2 C 2-072 817100 AF-2-SB-014-H4 F-A VT -3 NA STRUT AF-2-099-401-S33R Fl 30 2 C 2-072 818600 AF-2-SB-017-HI F-A VT- 3 NA STRUT AF-2-028-402-S33R F1. 30 2 C 2-072 819000 AF-2-SB-017-H5S F-A VT -3 NA STRUT AF-2-039-401-S33R Fl.30 2 C -

2-072

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 156/

INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_____ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I---------- OUTAGE-

SUMMARY

EXAMINATION AREA CATGY NDE I INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 819500 AF-2-SB-019-H1 F-A VT-23 NA STRUT AF-2-050-401-S33R F1. 30 2 C -- - - - -

2-072 820000 AF-2-SB-019-H6 F-A VT -3 NA STRUT AF-2-097-402-S33R F1.30 2 C -

2-071 820100 AF-2-SB-019-H7 F-A VT- 3 NA STRUT AF-2-097-403-S33R Fl. 30 2 C -

2-071 820200 AF-2-SB-019-H8 F-A VT-3 NA STRUT AF-2-097-406-S33R F1.30 2 C 2-071 820250 AF-2-SB-019-H8 D-A VT -1 NA WELDED ATTACHMENT AF-2-097-406-S33R D1. 20 2 C 2-071 820400 AF-2-SB-020-H2 F-A VT -3 NA STRUT AF-2-099-408-S33R F1.30 R071 807SB 820700 AF-2-SB-020-H5 F-A VT- 3 NA STRUT AF-2-099-411-S33R F1.30 2 - X R071 807SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 157 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 820800 AF-2-SB-020-H6 F-A VT -3 NA STRUT AF-2-099-412-$33R Fl. 30 2 - X - -

R071 807SB 820900 AF-2-SB-020-H7 F-A VT-3 NA STRUT AF-2-099-413-S33P, Fl.30 X - -

R082 807SB 821800 AF-2-SB-021-H3 F-A VT- 3 NA STRUT AF-2-097-410-S3315 F1.30 2 - - X -

R082 807SB 821850 AF-2-SB-021-H3 D-A VT- 1 NA WELDED ATTACHMENT AF-2-097-410-S33R D1. 20 2 - X R071 807SB 822700 AF-2-SB-021-H12 F-A VT-3 NA BOX AF-2-097-423-S33A F1.30 2 - X R082 807SB 822750 AF-2-SB-021-H12 D-A VT-i NA WELDED ATTACHMENT AF-2-097-423-S33A D1.20 2 - X R082 807SB 825750 AF-2-SB-027-H6 D-A VT-I NA WELDED ATTACHMENT AF-2-030-403-S33R Dl .20 2 - X -

R073 794SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 158 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - - - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 826150 AF-2-SB-028ý-H1 D-A VT-1 NA WELDED ATTACHMENT AF-2-011-401-S33R D0. 20 X R074 805SB 827600 AF-2-SB-030A-H1 F-A VT- 3 NA SPRING AF-2-025-401-$33S F1.30 2 - X R074 793SB 827610 AF-2-SB-030A-H1 D-A VT-1 NA WELDED ATTACHMENT. ADDEDIN AF-2-025-401-S33S D0. 20 2 - IX - - 2RF10.

R074 793SB 829400 AF-2-SB-032-H2 F-A VT- 3 NA U-BOLT AF-2-101-402-S33R F1.30 X R073 792SB 829500 AF-2-SB-032-H3 F-A VT -3 NA BOX AF-2-101-431-S33A Fl. 30 X R073 792SB 829550 AF-2-SB-032-H3 D-A VT- i NA WELDED ATTACHMENT AF-2-101-431-S33A D1.20 2 - X R073 792SB 836500 AF-2-SB-042-H11 F-A VT-3 NA BOX AF-2-100-407-S33A F1.30 2 - - - X R082 809SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 159 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI EXAMINATION AREA -~OUTAGE INSTRUCTIONS

SUMMARY

CATGY NDE NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 1 2, **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 836550 AF-2-SB-042-H11 *D-A VT-1 NA WELDED ATTACHMENT AF-2-100-407-S33A D1.20 - - X R082 809SB 837500 AF-2-SB-044-HI F-A VT -3 NA BOX AF-2-102-405-S33A Fl. 30 2 - 'X 2-074 837550 AF-2-SB-044-H1 D-A VT- i NA WELDED ATTACHMENT AF-2-102-405-S33A D1.20 X -

2-074 838600 AF-2-SB-044-HI2 F-A VT-3 NA SNUBBER AF-2-102-416-S33K Fl .30 - - X 2-082 839000 AF-2-SB-045-HI F-A VT-3 NA BOX AF-2-096-405-S33A F1.30 - - - X 2-074 839050 AF-2-SB-045-H1 D-A VT- I NA WELDED ATTACHMENT AP-2-096-405-S33A Dl. 20 2 - - X 2-074 839600 AF-2-SB-045-H7 F-A VT -3 NA STRUT AR-2-096-413-S33R Fl. 30 2 - -

-X 2-082

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 160 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -----------

SUMMARY

EXAMINATION AREA CATGY NDE 0 U TAG E- ------ INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH I - -- -

- 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 839650 AF-2-SB-045-H7 D-A VT-1 NA WELDED ATTACHMENT AF-2-096-413-S33R D1.20 2 - X -

2-082 841000 AF-2-SB-046-H6 F-A IVT-3 NA BOX AF-2-098-412-S33A F1.30 2 - X -

2-082 841050 AF-2-SB-046-H6 D-A VT-1 NA WELDED ATTACHMENT AF-2-098-412-S33A D1.20 2 - X -

2-082 841500 AF-2-SB-047-H3 F-A VT- 3 NA STRUT AF-2-096-439-S43R F1.30 X 2-078 841550 AF-2-SB-047-H3 D-A VT-I NA WELDED ATTACHMENT AF-2-096-439-S43R D1.20 X 2-078 845800 AF-2-SB-055A-H3 F-A VT -3 NA STRUT AF-2-097-433-S53R F1.30 2 X 2-094 845850 AF-2-SB-055A-H3 D-A VT-i NA WELDED ATTACHMENT AF-2-097-433-S53R D1.20 2 - X -

2-094

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 161 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI I -

SUMMARY

EXAMINATION AREA CATGY NDE S OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH Ii 2 1 23 1 2 **CALIBRATION BLOCK-*

AUXILIARY FEEDWATER 849200 AF-2-SB-063A-H1 F-A VT- 3 NA STRUT AF-2-103-411-S53R F1.30 2 - X -

2-089 849250 AF-2-SB-063A-HI D-A VT- I NA WELDED ATTACHMENT AF-2-103-411-S53R D01 20 2 - - --X 2-089 849700 AF-2-SB-063A-HG F-A VT -3 NA BOX AF-2-111-401-S63R F1.30 X -

2-100A 849750 AF-2-SB-063A-H6 D-A VT- i NA WELDED ATTACHMENT AF-2-111-401-S63R D1.20 2 - X -

2-100A 850900 AF-2-YD-001-H1O F-A VT-3 NA STRUT AF-2-001-421-Y33R F1.30 2 - - - X 2-085D 850950 AF-2-YD-001-H10 D-A VT-I NA WELDED ATTACHMENT AF-2-001-421-Y33R D0.20 2- - x -

2-085D 851450 AF-2-SB-010-H15 D-A VT-1 NA WELDED ATTACHMENT AF-2-006-402-S33R D1.20 2 - - - X 2-074

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 162 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD I

ASME PERIOD PERIOD PERIOD SEC. XI

--- - -OUTAGE--------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

AUXILIARY FEEDWATER 851650 AF-2-SB-010-H17 D-A VT- 1 'NA WELDED ATTACHMENT AF-2-006-405-S33R Dl. 20 2 - X -

2-074 852200 AF-2-YD-002-H5 F-A VT-3 NA STRUT AF-2-002-418-Y33R F1.30 X 2-085D 852250 AF-2-YD-002-H5 D-A VT-1 NA WELDED ATTACHMENT AF-2-002-418-Y33R D1.20 2 - X 2-085D 855000 AF-2-YD-006-H3 F-A VT -3 NA STRUT AF-2-043-4 03-Y43R F1.30 2 - X 2-085D COMPONENT COOLING 856600 CC-2-AB-001-H5 F-A VT -3 NA STRUT CC-2-019-706-A43R Fl. 30 2 C X-204 856650 CC-2-AB-001-H5 D-A VT -1 NA WELDED ATTACHMENT CC-2-019-706-A43R D1.20 2 C X-204 856700 CC-2-AB-001-H6 F-A VT -3 NA SPRING CC-2-019-707-A43S Fl.30 2 C

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 163 INSERVICE INSPE6TION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL _ _PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

- - - TT A GE-------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 i **CALIBRATION BLOCK**

COMPONENT COOLING 856750 CC-2-AB-001-H6 D-A VT-1 NA WELDED ATTACHMENT CC-2-019-707-A43S D1.20 2 C 856800 CC-2-AB-001-H7 F-A VT -3 NA SPRING CC-2-019-713-A43S Fl. 30 2 C X-207 856850 CC-2-AB-001-H7 D-A VT-1 NA WELDED ATTACHMENT CC-2-0i9-713-A43S D1.20 2 C -

X-207 857050 CC-2-AB-001-HI0 F-A VT -3 NA SNUBBER CC-2-019-715-A43K Fl.30 2 C 857100 CC-2-AB-002-H1 F-A VT-3 NA STRUT CC-2-045-001-A33R F1.30 2 C 857200 CC-2-AB-002-H2 F-A VT-3 NA STRUT CC-2-045-002-A33R Fl. 30 2 C -

857300 CC-2-AB-002-H3 F-A VT -3 NA STRUT CC-2-045-004-A33R F1.30 2 C

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 164 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR II FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD I

SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE--------------- INSTRUCTIONS ITEM NO METH 1 23 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION 112 COMPONENT COOLING 859250 CC-2-AB-003-H6 D-A VT-1 NA WELDED ATTACHMENT CC-2-012-707-A43R D1.20 2 C X-207 859400 CC-2-AB-004-H1 F-A VT-3 NA SPRING CC-2-969-700-A43S F1.30 2 - X R197 800AB 859450 CC-2-AB-004-H1 D-A VT-1 NA WELDED ATTACHMENT CC-2-969-700-A43S D1.20 2 - X - -

R197 800AB 862300 CC-2-AB-006-H6 F-A VT- 3 V NA STRUT CC-2-028-401-A33R Fl. 30 2 C -

X-174 862350 CC-2-AB-006-H6 D-A VT- I NA WELDED ATTACHMENT CC-2-028-401-A33R D0. 20 2 C -

X-174 862500 CC-2-AB-006-H8 F-A VT-3 NA STRUT CC-2-028-404-A33R Fl. 30 2 C X-174 862550 CC-2-AB-006-H8 D-A VT- i NA WELDED ATTACHMENT CC-2-028*404-A33R 01.20 2 C X-174

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 165 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 2 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 862700 CC-2-AB-006-H10 F.-A VT-I NA STRUT CC-2-028-424-A33R F1.30 2 C X-174 862750 CC-2-AB-006-H1O D-A VT -1 NA WELDED ATTACHMENT CC-2-028-424-A33R D1.20 2 C -

X-174 862800 CC-2-AB-006-H11 F-A VT- 3 NA BOX CC-2-028-704-A33A Fl. 30 2 C 862850 CC-2-AB-006-H1I D-A VT-i NA WELDED ATTACHMENT CC-2-028-704-A33A D0.20 2 C -

863100 CC-2-AB-007-H2 "F-A VT- 3 NA BOX CC-2-045-007-A43A Fl. 30 2 C 863150 CC-2-AB-007-H2 D-A VT -1 NA WELDED ATTACHMENT CC-2-045-007-A43A D1.20 2 C -

863900 CC-2-AB-008-H6 F-A VT- 3 NA SPRING CC-2-015-701-A43S Fl. 30 2 C -

X-204

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 166 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

OUTAGE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION COMPONENT COOLING 863950 CC-2-AB-008-H6 0D-A VT-I NA WELDED ATTACHMENT CC-2-015-701-A43S Dl. 20 2 C X-204 864000 CC-2-AB-008-H7 F-A VT-3 NA SNUBBER CC-2-044-700-A43K F1.30 2 C X-204 864050 CC-2-AB-008-H7 D-A VT-1 NA WELDED ATTACHMENT CC-2-044-700-A43K D1.20 2 C X-204 864200 CC-2-AB-009-H1 F-A VT- 3 NA SPRING CC-2-050-001-A43S F1.30 2 C X-207 864250 CC-2-AB-009-H1 D-A VT-1 NA WELDED ATTACHMENT CC-2-050-Q01-A43S D1.20 2 C X-207 864500 CC-2-AB-009-H4. F-A VT-3 NA SPRING CC-2-050-701-A43S Fl. 30 2 C X-197 864550 CC-2-AB-009-H4 D-A VT-1 NA WELDED ATTACHMENT CC-2-050-701-A43S D1.20 2 C X-197

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 167 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR li FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE I- S OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH Ii 2 12 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 864600 CC-2-AB-009-H5 F-A VT-3 NA SNUBBER CC-2-050-702-A43K F1. 30 2 C X-197 864650 CC-2-AB-009-H5 D-A VT-1 NA WELDED ATTACHMENT CC-2-050-702-A43K D1.20 2 C -

X-197 864700 CC-2-AB-009-H6 F-A VT- 3 NA SPRING CC-2-050-703-A43S Fl. 30 2 C -

864750 CC-2-AB-009-H6 D-A VT-1 NA WELDED ATTACHMENT CC-2-050-703-A43S D1.20 2 C 865200 CC-2-AB-010-H2 F-A VT- 3 NA STRUT CC-2-116-701-A43R Fl. 30 2 C X-207 865300 CC-2-AB-011-HI F-A VT-3 NA STRUT CC-2-110-700-A43R FI. 30 2 C -

X-207 865800 CC-2-AB-011-H6 F-A VT-3 NA BOX CC-2-155-701-A43A F1.30 2 C X-194

DATE: 01/21/08 f COMANCHE PEAK UNIT 2 PAGE: 168 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SE COND THIRD ASME PERIOD PE RIOD PERIOD SEC. XI IADE--------------

SUMMARY

EXAMINATION AREA CATGY NDE 0 U TAG E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 j 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 865850 CC-2-AB-011-M6 D-A VT-1 NA WELDED ATTACHMENT CC-2-155-701-A43A D1.20 2 C X-194 866100 CC-2-AB-012-H3 F-A VT -3 NA STRUT CC-2-126-401-A43R F1.30 2 C -

866300 CC-2-AB-012-H5 F-A VT- 3 NA STRUT CC-2-133-401-A43R Fl. 30 2 C 866400 CC-2-AB-012-H6 F-A VT- 3 NA BOX CC-2-133-700-A43A Fl.30 2 C 866450 CC-2-AB-012-H6 D-A VT-1 NA WELDED ATTACHMENT CC-2-133-700-A43A D1.20 2 C 866800 CC-2-AB-012-H1O F-A VT-3 NA SNUBBER CC-2-158-407-A43K Fl.30 2u2 -

X-207 866850 CC-2-AB-012-H1O D-A VT- 1 NA WELDED ATTACHMENT CC-2-158-407-A43K Di.20 2 C X-207

, DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 169 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE I 2 OUTAGE INSTRUCTIONS ITEM NO METH S12 12 3 I 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION COMPONENT COOLING 866900 CC-2-AB-012-H11 F-A VT -3 NA SNUBBER CC-2-158-408-A43K Fl. 30 2 C X-207 866950 CC-2-AB-012-H11 D-A VT-i NA WELDED ATTACHMENT CC-2-158-408-A43K D1.20 2 C -

X-207 871600 CC-2-AB-017-H12 F-A VT -3 NA BOX CC-2-008-719-A33A F1.30 2 X - - - -

R174 800AB 871650 CC-2-AB-017-H12 D-A VT-1 NA WELDED ATTACHMENT CC-2-008-719-A33A D1.20 2 - X -

R174 800AB 872000 CC-2-AB-018-H3 F-A VT -3 NA BOX CC-2-040-403-A33R F1.30 X - - -

RI80 800AB 872050 CC-2-AB-018-H3 D-A VT-I NA WELDED ATTACHMENT CC-2-040-403-A33R D1.20 x - -

R180 800AB 872100 CC-2-AB-018-H4 F-A VT-3 NA STRUT CC-2-040-404-A33R F1.30 RI80 800AB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 170 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA .CATGY NDE 0 U T A G E INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 12 1 2 3 12 **CALIBRATION BLOCK**

COMPONENT COOLING 872150 CC-2-AB-018-H4 D-A VT-1 NA WELDED ATTACHMENT CC-2-040-404-A33R D1. 20 2 X R180 800AB 872200 CC-2-AB-018-H5 F-A VT-3 NA STRUT CC-2-048-401-A33R F1.30 2 - X -

R170 800AB 872900 CC-2-AB-018-H12 F-A VT -3 NA SPRING CC-2-048-410-A33S Fl. 30 2 X RI80 80OAB 876200 CC-2-AB-026-H2 F-A VT- 3 NA BOX CC-2-057-014-A33A F1.30 XI R180 800AB 876250 CC-2-AB-026-H2 D-A VT-1 NA WELDED ATTACHMENT CC-2-057-014-A33A D1.20 X R180 800AB 876700 CC-2-AB-027A-H4 F-A VT- 3 NA SNUBBER CC-2-043-714-A33K F1.30 2 X - -

RI80 800AB 876750 CC-2-AB-027A-H4 D-A VT-1 NA WELDED ATTACHMENT CC-2-043-714-A33K D1. 20 2 - X RI80 800AB

DATE:. 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 171 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIO D PERIOD PERIOD SEC. XI

- OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE I11 2 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 877100 CC-2-AB-027A-H8 F-A VT73 NA BOX CC-2-066-700-A33A F1.30 x - -

R180 800AB 877150 CC-2-AB-027A-H8 D-A VT- 1 NA WELDED ATTACHMENT CC-2-066-700-A33A D1.20 2 - X - -

RI80 800AB 877200 CC-2-AB-027A-H9 F-A VT- 3 NA BOX CC-2-068-700-A33A Fl. 30 2 X - -

R180 800AS 877250 CC-2-AB-027A-H9 D-A VT- 1 NA WELDED ATTACHMENT CC-2-068-700-A33A D1.20 2 -

R180 800AB 878700 CC-2-AB-032-H9 F-A VT-3 NA U-BOLT CC-2-011-708-A63R F1.30 2 - X -

X-241 879800 CC-2-AB-033-H5 F-A VT-3 NA STRUT CC-2-007-010-A63R Fl. 30 2 - - x X-241 879850 CC-2-AB-033-H5 D-A VT- 1 NA WELDED ATTACHMENT CC-2-007-010-A63R D1.20 - X X-241

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 172 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -- PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD I

[ J ASME PERIOD PERIOD PERIOD L J SEC. XI I

SUMMARY

EXAMINATION AREA CATGY NDE -OUTAGE INSTRUCTIONS f 1 NUMBER IDENTIFICATION ITEM NO METH 21 2 '3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 880200 CC-2-AB-033-H9 F-A VT -3 NA STRUT CC-2-007-017-A63R Fl. 30 2 - - - X X-241 880250 CC-2-AB-033-H9 D-A VT- 1 NA WELDED ATTACHMENT CC-2-007-017-A63R D1.20 2 X - -

X-241 880700 CC-2-AB-038-H3 F-A VT- 3 NA SPRING CC-2-164-403-A53S Fl.30 2 - X - -

880750 CC-2-AB-038-H3 D-A VT- 1 NA WELDED ATTACHMENT CC-2-164-403-A53S D1.20 2 - - - X 881000 CC-2-AB-038-H6 F-A VT-3 NA SNUBBER CC-2-164-407-A63K F1.30 2 - X X-235 882900 CC-2-AB-039-H9 F-A VT -3 NA STRUT CC-2-156-710-A53R Fl. 30 2 - X -

X-194 882950 CC-2-AB-039-H9 D-A VT-i NA WELDED ATTACHMENT CC-2-156-710-A53R D1.20 2 - - X -

X-194

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 173 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PER IOD PERIOD PERIOD SEC. XI -

SUMMARY

EXAMINATION AREA CATGY NDE - OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 12 **CALIBRATION BLOCK**

COMPONENT COOLING 883000 CC-2-AB-049-HI F-A VT- 3 NA SNUBBER CC-2-007-001-A73K Fl. 30 2 X X-245 883050 CC-2-AB-049-H1 D-A VT-1 NA WELDED ATTACHMENT CC-2-007-001-A73K D0.20 2 - X X-245 883400 CC-2-AB-050-H1 F-A VT- 3 NA STRUT CC-2-011-001-A63R F1.30 X X-241 883450 CC-2-AB-050-H1 D-A VT-.1 NA WELDED ATTACHMENT CC-2-011-001-A63R D1.20 2 -

X-241 883600 CC-2-AB-050-H3 F-A VT- 3 NA STRUT CC-2-011-003-A73R Fl. 30 2 - - X - - -

X-245 883650 CC-2-AB-050-H3 D-A VT- 1 NA WELDED ATTACHMENT CC-2-011-003-A73R D1.20 2 - - X X-245 885100 CC-2-EC-001-H7 F-A VT-3 NA SPRING CC-2-035-709-E33S F1.30 2 - - - X X-115B

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 174 INSERVICE INSPECTION PLAN, CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE F INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 1 2 I **CALIBRATION BLOCK**

COMPONENT COOLING 885150 CC-2-EC-001-H7 D-A VT-1 NA WELDED ATTACHMENT CC-2-035-709-E33S D1.20 2 - X X-I15B 885400 CC-2-EC-001-H10 F-A VT -3 NA BOX CC-2-035-714-A33A Fl. 30 2 X X-180 885450 CC-2-EC-001-H1O D-A VT-i NA WELDED ATTACHMENT CC-2-035-714-A33A D1.20 2 - - - X X-180 886300 CC-2-EC-003A-H1 F-A VT -3 NA STRUT CC-2-107-700-E23R Fl.30 -X X-115B 887000 CC-2-EC-004-H1 F-A VT -3 NA STRUT CC-2-105-401-E23R F1.30 2 - -- X X-115B 887050 CC-2-EC-004-HI D-A VT- 1 NA WELDED ATTACHMENT CC-2-105-401-E23R Dl. 20 - X X-115B 888300 CC-2-FB-002-Hl F-A VT -3 NA SNUBBER CC-2-126-004-F43K FI.30 2 - - X

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 175 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. xI - ----------------- ----------- I

SUMMARY

EXAMINATION AREA CATGY NDE - ---- OUTAGE- INSTRUCTIONS ITEM NO METH I1 2 1 23 1 2 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION COMPONENT COOLING 891200 CC-2-RB-046-H2 F-A VT-3 NA BOX CC-2-204-407-C53A Fl.30 2 - - X 2-155E 891250 CC-2-RB-046-H2 D-A VT-1 NA WELDED ATTACHMENT CC-2-204-407-C53A D1.20 X -

2-155E 891600 CC-2-RB-046-H6 F-A VT-3 NA STRUT CC-2-204-421-C53R F1.30 2 - - X 2-155E 891650 CC-2-RB-046-H6 D-A VT-I NA WELDED ATTACHMENT CC-2-204-421-C53R Dl. 20 - X 2-155E 892000 CC-2-RB-086-H2 F-A VT -3 NA STRUT CC-2-246-423-C53R Fl . 30 2 X 2-155D 892050 CC-2-RB-086-H2 D-A VT-I NA WELDED ATTACHMENT CC-2-246-423-C53R Dl. 20 2 X 2-155D 892200 CC-2-RB-084-H4 F-A VT- 3 NA STRUT CC-2-249-404-C53R Fl. 30 X -

2-155D

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 176 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS_ _ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I **CALIBPATION BLOCK**

COMPONENT COOLING.

892250 CC-2-RB-084-H4 D-A VT-i NA WELDED ATTACHMENT CC-2-249-404-C53R D1.20 2 X -

2-155D 892900 CC-2-RB-085-H6 F-A VT- 3 NA STRUT CC-2-204-420-C53R F1.30 2 - - - X -

2-155E 892950 CC-2-RB-085-H6 D-A VT- 1 NA WELDED ATTACHMENT CC-2-204-420-C53R D1.20 - -X -

2-155E 893600 CC-2-RB-086-H4 F-A VT- 3 NA STRUT CC-2-246-419-C53R Fl. 30 X 2-155D 893650 CC-2-RB-086-H4 D-A VT- 1 NA WELDED ATTACHMENT CC-2-246-419-C53R D1.20 2 - - - - X 2-155D 893800 CC-2-RP-086-H6 F-A VT -3 NA BOX CC-2-246-422-C53A F1.30 2 X -

2-155D 893850 CC-2-RB-086-H6 D-A VT- 1 NA WELDED ATTACHMENT CC-2-246-422-C53A D0.20 2 X 2-155D

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 177 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD I.

SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 1 2 I **CALIBRATION BLOCK**

COMPONENT COOLING 894000 CC-2-RB-097-H1 F-A VT -3 NA STRUT CC-2-201-402-C53R Fl. 30 - x 2-155G 894050 CC-2-RB-097-H1 D-A VT-1 NA WELDED ATTACHMENT CC-2-201-402-C53R Dl.20 - x -

2-155G 894100 CC-2-RB-097-H2 F-A VT -3 NA STRUT CC-2-201-404-C53R F1.30 - x 2-155G 894150 CC-2-RB-097-H2 D-A VT-i NA WELDED ATTACHMENT CC-2-201-404-C53R D1.20 2 - X - -

2-155G 894700 CC-2-SB-034B-H1 F-A VT -3 NA STRUT CC-2-008-406-$33R F1.30 2 - X 2-070 894750 CC-2-SB-034B-H1 D-A VT- I NA WELDED ATTACHMENT CC-2-008-406-$33R Dl. 20 2 X 2-070 894900 CC-2-SB-034B-H3 F-A VT-3 NA STRUT CC-2-030-401-S33R F1.30 2 - - X 2-070

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 178 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION.INTERVAL PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS 1 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION ITEM NO METH 112 2 3 1 2 COMPONENT COOLING 895600 CC-2-SB-035-H4 F-A VT- 3 NA BOX CC-2-028-428-$33R F1.30 X 2-070 895650 CC-2-SB-035-H4 D-A VT -1 NA WELDED ATTACHMENT CC-2-028-428-S33R D1.20 - - X 2-070 895700 CC-2-SB-035-H5 F-A VT-3 NA BOX CC-2-031-409-$33R F1.30 2 - - - X - -

2-070 895750, CC-2-SB-035-H5 D-A VT -1 NA WELDED ATTACHMENT

, CC-2-031-409-$33R Dl. 20 X 2-070 896600 CC-2-SB-036-H3 F-A VT- 3 NA STRUT CC-2-028-417-$33R F1. 30 - X -

2-071 896650 CC-2-SB-036-H3 D-A VT- i NA WELDED ATTACHMENT CC-2-028-417-S33R D1.20 2 -

2-071 896700 CC-2-SB-036-H4 F-A VT- 3 NA STRUT CC-2-028-422-S33R Fl. 30 - X 2-071

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 179 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI I

OUTAGE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 11 2 1 ~CALIBRATION BLOCK**

2 3 1 2 COMPONENT COOLING 896750 CC-2-SB-036-H4 D-A VT- I NA WELDED ATTACHMENT CC-2-028-422-S33R D1.20 X -

2-071 896900 CC-2-SB-037-H2 F-A VT- 3 NA SPRING CC-2-077-403-S43S Fl. 30 2 - - X -

2-069 896950 CC-2-SB-037-H2 D-A VT-i NA WELDED ATTACHMENT CC-2-077-403-S43S D1.20 2 - - X 2-069 897200 CC-2-SB-037-H5 F-A VT -3 NA SPRING CC-2-077-406-$43S Fl . 30 2 X -

2-069 897250 CC-2-SB-037-H5 D-A VT- i NA WELDED ATTACHMENT CC-2-077-406-S43S D1.20 2 X -

2-069 897400 CC-2-SB-038-H1 F-A VT- 3 NA SNUBBER CC-2-031-401-S33K F1.30 2 C -

2-069 897450 CC-2-SB-038-HI D-A VT- 1 NA WELDED ATTACHMENT CC-2-031-401-S33K D1.20 2 C -

2-069

DATE: 01121108 COMANCHE PEAK UNIT 2 PAGE: 180 INSERVICE INSPECTION-PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL ____ PLAN STATUS_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE -~OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 21 2 3 12 **CALIBRATION BLOCK**

COMPONENT COOLING 897600 CC-2-SB-038-H3 F-A VT- 3 NA SPRING CC-2-031-407-S43S Fl. 30 2 C -

2-069 897650 CC-2-SB-038-H3 D-A VT-1 NA WELDED ATTACHMENT CC-2-031-407-S43S D1.20 2 C 2-069 898200 CC-2-SB-039-H2 F-A VT -3 NA STRUT CC-2-028-409-$33R Fl. 30 2 C -

2-063 898250 CC-2-SB-039-H2 D-A VT-1 NA WELDED ATTACHMENT CC-2-028-409-$33R D0. 20 2 C 2-063 898400 CC-2-SB-039-H4 F-A VT- 3 NA SNUBBER CC-2-028-411-S33K Fl. 30 2 C -

2-063 898450 CC-2-SB-039-H4 D-A VT- I NA WELDED ATTACHMENT CC-2-028-411-S33K D1.20 2 C -

2-063 898500 CC-2-SB-039-H5 F-A VT- 3 NA SNUBBER CC-2-028-412-$33R Fl. 30 2 C -

2-064

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 181 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL -_____PLAN STATUS_ _ _ _ PRESERVICE YEAR FIRST - SECOND THIRD I ASME PERIOD PERIOD PERIOD SEC. XI 1------------ O--TA--

l--------------

SUMMARY

EXAMINATION AREA CATGY NDE 01 U T A 1E 2 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH

[1 2 1 2 3 . 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 898550 CC-2-SB-039-H5 D-A VT-1 NA WELDED ATTACHMENT CC-2-028-412-$33R D1.20 2 C -

2-064 898600 CC-2-SB-039-H6 F'A VT- 3 NA STRUT CC-2-028-413-$33R Fl.30 2 C 2-064 898650 CC-2-SB-039-H6 D-A VT-1 NA WELDED ATTACHMENT CC-2-028-413-$33R D1.20 2 C 2-064 899700 CC-2-SB-039-H7 F-A VT- 3 NA STRUT CC-2-028-414-$33R F£.30 2 C -

2-065 898750 CC-2-SB-039-H7 D-A VT-1 NA WELDED ATTACHMENT CC-2-028-414-$33R D1.20 2 C 2-065 899300 CC-2-SB-040-H5 F-A VT -3 NA SPRING CC-2-065-411-S43S F1.30 2 C 2-068 899350 CC-2-SB-040-H5 D-A VT-1 NA WELDED ATTACHMENT CC-2-065-411-S43S D1.20 2 C 2-068

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 182 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME I PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 112 1 2 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 900200 CC-2-SB-042-H5 F-A VT- 3 NA BOX CC-2-065-402-$33R Fl. 30 2 C 2-070 900250 CC-2-SB-042-HS D-A VT-1 NA WELDED ATTACHMENT CC-2-065-402-$33R D1.20 2 C 2-070 900300 CC-2-SB-042-HN F-A VT-3 NA STRUT CC-2-065-404-$33R Fl. 30 2 C 2-068 900350 CC-2-SB-042-H6 D-A VT- 1 NA WELDED ATTACHMENT CC-2-065-404-533R D1.20 2 C 2-068 900500 CC-2-SB-042-H8 F-A VT- 3 NA STRUT CC-2-078-401-$33R Fl. 30 2 C 2-070 900550 CC-2-SB-042-H8 D-A VT- 1 NA WELDED ATTACHMENT CC-2-078-401-$33R D1.20 2 C 2-070 902500 CC-2-SB-047-H2 F-A VT -3 NA STRUT CC-2-008-402-$33R Fl. 30 2 X -

R063 800AB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 183 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING 902550 CC-2-SB-047-H2 D-A VT-1 NA WELDED ATTACHMENT CC-2-008-402-533R D1,20 2 - - x R063 800SB 903100 CC-2-SB-048-H3 F-A VT- 3 NA STRUT-With App RR D-1 CC-2-159-409-$53R F1.30 2 - - X R088 839SB 903150 CC-2-SB-048-H3 D-A VT-1 NA WELDED ATTACHMENT-App RR D-1 CC-2-159-409-S53R D1.20 X - -

R088 839SB 903800 CC-2-SB-052-H3 F-A VT-3 NA STRUT-with APP RR D-1 CC-2-155-408-$53R Fl. 30 - - X I- -

ROBS 839SB 903850 CC-2-SB-052-H3 D-A VT- 1 NA WELDED ATTACHMENT-App RR D-1 CC-2-155-408-$53R D1.20 2 X R088 839SB 904000 CC-2-SB-052-H5 F-A VT- 3 NA BOX CC-2-202-401-$53A F1. 30 2 - -X -

2-088 904050 CC-2-SB-052-H5 D-A VT-i NA WELDED ATTACHMENT CC-2-202-401-$53A D1.20 2 X 2-088

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 184 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD I ASME PERIO D PERIOD PERIOD I

SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE

  • OUTAGE- . - - -, - I INSTRUCTIONS 1 2 1 2 3 1 .21 **CALIBRATION BLOCK**

NUMBER IDENTIFICATION ITEM NO METH COMPONENT COOLING 907750 CC-2-SB-063-H4 D-A VT- 1 NA WELDED ATTACHMENT CC-2-146-405-$43R Dl. 20 2 - - X 2-086 908100 CC-2-SB-063-H8 F-A VT-3 NA STRUT CC-2-167-402-$43R F1.30 - x -

2-086 908150 CC-2-SB-063-H8 D-A VT-I NA WELDED ATTACHMENT CC-2-167-402-$43R D1.20 2 - X -

2-086 DIESEL OIL 9i0600 DO-2-DG-018-H2 F-A VT-3 NA BOX DO-2-056-402-D53A F1.30 X -

R085 838DG 910650 DO-2-DG-018-H2 D-A VT-1 NA WELDED ATTACHMENT DO-2-056-402-D53A D1.20 2 X R085 838DG 910900 DO-2-DG-020-H2 F-A VT- 3 NA BOX DO-2-053-402 D53A Fl.30 2 X -

R085 838DG 910950 DO-2-DG-020-H2 D-A VT- i NA WELDED ATTACHMENT DO-2-053-402-D53A D0.20 2 X - -

5R05 Ri2Dn

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 185 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR IRST SECOND THIRD ASME p ERIOD PERIOD PERIOD F

SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE 0 U T A G - ----------- INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2- 2 U 2T A--

3 1 2 I CALIBRATION BLOCK**

MAIN STEAM 912800 MS-2-SB-001-H1 F-A VT--3 NA BOX MS-2-415-001-S23R F1.30 2- X 2-074 912850 MS-2-SB-001-Hl D-A VT -1 NA WELDED ATTACHMENT MS-2-415-001-S23R D1.20 X 2-074 912900 MS-2-SB-001-H2 F-A VT-3 NA STRUT MS-2-416-401-S33R Fl. 30 2 - - - X -

2-074 913600 MS-2-SB-002-Hl F-A VT- 3 NA STRUT MS-2-416-405-S43R Fl. 30 2 - X 2-082 913650 MS-2-SB-002-Hl D-A VT- I NA WELDED ATTACHMENT MS-2-416-405-S43R D1.20 -CX 2-082 SERVICE WATER 915800 SW-2-AB-003-HI F-A VT- 3 NA STRUT SW-2-004-001-A33R Fl.30 2 X -

R175 800AB 915900 SW-2-AB-003-H2 F-A VT- 3 NA STRUT SW-2-004-002-A33R Fl. 30 2 - X -

R175 800AB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 186 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR E

I FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SERVICE WATER 916100 SW-2-AB-003-H4 F-A VT-3 NA STRUT SW-2-004-005-A33R Fl. 30 2 - - X R175 800AB 916200 SW-2-AB-003-N5 F-A VT- 3 NA STRUT SW-2-004-006-A33R Fl. 30 2 x R175 800AB 917200 SW-2-AB-005-H3 F-A VT-3 NA STRUT SW-2-102-020-A43R Fl.30 2 - X -

R204 817AB 917250 SW-2-AB-005-H3 D-A VT -1 NA WELDED ATTACHMENT SW-2-102-020-A43R D1.20 X R204 817AB 918600 SW-2-AB-006-H7 F-A VT-3 NA STRUT SW-2-173-022-A43R F1.30 2 - x R207 810AB 918650 SW-2-AB-006-H7 D-A VT-I NA WELDED ATTACHMENT SW-2-173-022-A43R D1.20 X -

R207 810AB 919700 SW-2-AB-007-H2 F-A VT-3 NA SNUBBER SW-2-012-022-F33K F1.30 RFBSW787AB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 187 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUSE_ PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 D 2 U3 - 1 E--- 2 **CALIBRATION BLOCK-*

SERVICE WATER 919750 SW-2-AB-007-H2 D-A VT-i NA WELDED ATTACHMENT SW-2-012-022-F33K D0.20 X RFBSW787AB 920600 SW-2-AB-008-H2 F-A VT-3 NA SNUBBER SW-2-010-002-A33K F1.30 X -

R175 787AB 921600 SW-2-AE-008-H13 F-A VT- 3 NA SNUBBER SW-2-129-004-A33K F1.30 - - x R175 787AB 921650 SW-2-AB-008-H13 D-A VT- i NA WELDED ATTACHMENT SW-2-129-004-A33K Dl1 20. 2 X R175 787AB 924500 SW-2-AB-010-H14 F-A VT- 3 NA STRUT SW-2-129-025-A43R F1.30 2 X R207 787AB 924550 SW-2-AB-010-H14 D-A VT-1 NA WELDED ATTACHMENT SW-2-129-025-A43R Dl. 20 x R207 787AB 925650 SW-2-AB-012-HI D-A VT-I NA WELDED ATTACHMENT SW-2-132-006-A43R D1.20 - X X-207

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 188 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIO D PERIOD PERIOD SEC. XI

-- OUTAGE-------------

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 -- CALIBRATION BLOCK*

SERVICE WATER 927000 SW-2-AB-012-H15 F-A VT-3 NA STRUT SW-2-132-021-A43R F1. 30 2 - X X-207 927050 SW-2-AB-012-H1S D-A VT -1 NA WELDED ATTACHMENT SW-2-132-021-A43R D1.20 2 - X X-207 931300 SW-2-FB-001-H7 F-A VT- 3 NA STRUT SW-2-001-021-F33R F1.30 - X 931350 SW-2-FB-001-H7 D-A VT- I NA WELDED ATTACHMENT SW-2-001-021-F33R Dl. 20 2 - - - X 934000 SW-2-FB-004-H8 F-A VT- 3 NA SNUBBER SW-2-012-024-F33K F1.30 2 X X-FBSWT 934050 SW-2-FB-004-H8 D-A VT-1 NA WELDED ATTACHMENT SW-2-012-024-F33K Dl. 20 X-FBSWT 934500 SW-2-SB-013-Hl F-A VT-3 NA BOX SW-2-102-429ýS43A Fl. 30 2-082

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 189 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- ---

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SERVICE WATER 934550 SW-2-SB-013-H1 D-A VT-I NA WELDED ATTACHMENT SW-2-102-429-S43A D1.20 2 X 2-082 934700 SW-2-SB-013-H3 F-A VT- 3 NA STRUT SW-2-102-431-S43R F1.30 2 - - X 2-082 934750 SW-2-SB-013-H3 D-A VT-1 NA WELDED ATTACHMENT SW-2-102-431-S43R D1.20 2 - X 2-082 934900 SW-2-SB-013-H5 F-A VT- 3 NA STRUT SW-2-102-433-S43R Fl. 30 X 2-082 934950 SW-2-SB-013-H5 D-A VT-1 NA WELDED ATTACHMENT SW-2-102-433-S43R D1.20 X 2-082 935100 SW-2-SB-013-H7 F-A VT- 3 NA STRUT SW-2-102-435-S43R F1.30 X 2-082 935150 SW-2-SB-013-H7 D-A VT- i NA WELDED ATTACHMENT SW-2-102-435-S43R D1.20 x 2-082

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 190 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I FIRST SECOND THIRD ASME PERIO[D PERIOD PERIOD SEC. XI -

OUTAGE

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SERVICE WATER 935300 SW-2-SB-013-H9 F-A VT -3 NA STRUT SW-2-102-437-S43R FP.30 2 - X 2-082 935350 SW-2-SB-013-H9 D-A VT-i NA WELDED ATTACHMENT SW-2-102-437-S43R D1.20 2 X 2-082 935800 SW-2-SB-014-H5 F-A VT -3 NA BOX SW-2-129-445-S43A F1.30 2 - -- - X 2-082 935850 SW-2-SB-014-H5 D-A VT- I NA WELDED ATTACHMENT SW-2-129-445-S43A Dl.20 - - - X 2-082 936500 SW-2-SB-018-H1 F-A VT- 3 NA STRUT SW-2-100-401-S33R F1.30 2 - - - -X 2-070 936550 SW-2-SB-018-H1 D-A VT-1 NA WELDED ATTACHMENT SW-2-100-401-S33R D1.20 X 2-070 936700 aW-2-SB-019-H2 F-A VT-3 NA STRUT SW-2-102-439-S43R F1.30 2 - - N 2-082

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 191 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI OUTAGE------------- --

SUMMARY

EXAMINATION AREA CATGY NDE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 I*CALIBRATION BLOCK**

SERVICE WATER 936750 SW-2-SB-019-H2 D-A VT-1 NA WELDED ATTACHMENT SW-2-102-439-S43R D1. 20 2 -

2-082 937000. SW-2-SB-019-H5 F-A VT- 3 NA STRUT SW-2-102-443-S43R F1.30 - -- -X 2-082 937050 SW-2-SB-019-H5 D-A VT-I NA WELDED ATTACHMENT SW-2-102-443-S43R D1. 20 - X, 2-082 938500 SW-2-SB-021-H6 F-A VT- 3 NA STRUT SW-2-132-416-S43R Fl. 30 X 2-082 938550 SW-2-SB-021-HG D-A VT-i NA WELDED ATTACHMENT SW-2-132-416-S43R D1.20 2 - - X 2-082 938800 SW-2-SB-021-H9 F-A VT- 3 NA STRUT SW-2-132-443-S33R F1.30 2 X 2-070 938850 SW-2-SB-021-H9 D-A VT- 1 NA WELDED ATTACHMENT SW-2-132-443-S33R D1. 20 2 - - -- -X 2-070

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 192 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR FIRST' SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

-OUT---A-GE-------------------

SUMMARY

EXAMINATION AREA CATGY NDE 1 U T A G ......

1E INSTRUCTIONS NUMBER IDENTIFICATION .ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

SERVICE WATER 939200 SW-2-SB-022-H4 F-A VT-3 NA BOX SW-2-173-410-S43A Fl. 30 2 939250 SW-2-SB-022-H4 D-A VT- 1 NA WELDED ATTACHMENT SW-2-173-410-S43A Dl. 20 2 -

939700 SW-2-SB-023-H5 F-A VT- 3 NA BOX SW-2-132-439-S43A Fl. 30 2 2-082 939750 SW-2-SB-023-HS D-A VT- 1 NA WELDED ATTACHMENT SW-2-132-439-S43A D1. 20 2 - X 2-082 943150 SW-2-YD-005-H17 D-A VT-1 NA WELDED ATTACHMENT SW-2-173-704-S33R D1. 20 2 - - X 2-070 943200 SW-2-YD-005-H18 F-A VT-3 NA BOX SW-2-173-705-Y33A F1.30 2 - - x 2-085D 943250 SW-2-YD-005-H18 D-A VT- I NA WELDED ATTACHMENT SW-2-173-705-Y33A D1.20 X 2-085D

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 193 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI -

OUTAGE--- -----------

SUMMARY

EXAMINATION AREA CATGY NDE 1 INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 3 1 2 **CALIBRATION BLOCK"*

SERVICE WATER 943900 SW-2-YD-006-H6 F-A VT- 3 NA BOX SW-2-132-428-Y33R Fl. 30 2 - X R085D800YD 943950 SW-2-YD-006-H6 D-A VT-1i NA WELDED ATTACHMENT SW-2-132-428-Y33R Dl. 20 2 - X R085DBOOYD 945000 SW-2-YD-006-H17 F-A VT- 3 NA BOX SW-2-132-701-Y33A Fl.30 2 - x R085DBOOYD 945050 SW-2-YD-006-H17 D-A VT- 1 NA WELDED ATTACHMENT SW-2-132-701-Y33A D1.20 2 - X -

R085D800YD 946950 SW-2-YD-007-HI8 D-A VT-1 NA WELDED ATTACHMENT SW-2-102-471-S33R D0. 20 2 - - - X 2-070 947100 SW-2-YD-007-H20 F-A VT -3 NA STRUT SW-2-102-482-Y33R F1. 30 X 2-085D 947150 SW-2-YD-007-H20 D-A VT-1 NA WELDED ATTACHMENT SW-2-102-482-Y33R D1.20 2 - X 2-085D

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 194 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS - -PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD SEC. XI

SUMMARY

EXAMINATION AREA CATGY NDE OUTAGE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 j **CALIBRATION BLOCK*-

SW-2-YD-007-H21 947200 SW-2-YD-007-H21 F-A VT -3 NA BOX SW-2-102-700-Y33A Fl.30 2 - X 2-085D SERVICE WATER I

947250 SW-2-YD-007-H21 D-A VT- I NA WELDED ATTACHMENT SW-2-102-700-Y33A D1.20 2 - X 2-085D 948150 SW-2-YD-008-H8 D-A VT-1 NA WELDED ATTACHMENT SW-2-129-456-Y33R D1.20 2 - X 2-085D 948950 SW-2-YD-008-H16 D-A VT-I NA WELDED ATTACHMENT SW-2-129-464-Y33R D1.20 2 - X 2-095D AUXILIARY FEEDWATER 4-AF-2-104-2003-3 I

950000 AF-2-SB-055B-MR1 NA MOMENT RESTRAINT, S2-0688-10 F-A VT- 3 CP2-AFSSMR-01 F1.40 - - X -

R100A861SB AUXILIARY FEEDWATER 4-AF-2-107-2003-3 950200 AF-2-SB-027B-MR3 F-A VT- 3 NA MOMENT RESTRAINT, S2-0688-12.

CP2-AFSSMR-03 F1.40 - - - -X REPLACES SW-2-SI-004-PS1,-PS2, R100AB61SB AND -PS3. REFER TO SECTION 6.0 OF THE ISI PROGRAM PLAN.

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 195 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL PLAN STATUS PRESERVICE YEAR FIRST SECOND THIRD ASME PERIOD PERIOD PERIOD VT SEC. X

SUMMARY

EXAMINATION AREA CATGY NDE 1 2 OUTAGE INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH 1 2 1 2 3 1 2 **CALIBRATION BLOCK**

COMPONENT COOLING WATER CP2-CCAPCC-01 951400 CC-2-AB-001-PS1 F-A VT-3 NA BASE. DWG FP-1421067417 CCW PUMP SUPPORTS Fl. 40 X R205 810AB COMPONENT COOLING WATER CP2-CCAHHX-01 951600 CC-2-AB-005-HXS1 F-A VT- 3 NA DWG 2-74-06-32467D3 CCW HX SUPPORT F1.40 2 - - - - -X R174 790AB 951700 CC-2-AB-005-HXWS1 D-A VT-1 NA SADDLES. DWG 2-74-06-32467D3 CCW HX SUPPORT WELDED D1.10 - - - -X ATTACHMENT R174 790AB COMPONENT COOLING WATER CP2-CCATST-01 952000 'CC-2-AB-045-TS1 F-A VT- 3 NA DWG N-2640-359 CCW SURGE TANK SUPPORTS F1.40 2 - X R245 873AB 952100 CC-2-AB-045-TWS1 D-A VT-1 NA SADDLE. DWG N-2640-359 CCW SURGE TANK SUPPORTS WELDED D1.10 2 - X ATTACH.

R245 873AB CHEMICAL & VOLUME CONTROL TCX-CSAHLD-01 952200 CS-2-SB-104-HXS1 F-A VT- 3 NA DWG 5665 LETDOWN HX SUPPORTS F1.40 2 - C R81 790SB

DATE: 01/21/08 COMANCHE PEAK UNIT 2 PAGE: 196 INSERVICE INSPECTION PLAN CLASS 3 SCHED/COMPL COMPONENTS INSPECTION INTERVAL_ PLAN STATUS PRESERVICE YEAR I F IRST SECOND THIRD ASME, P ERIOD PERIOD PERIOD SEC. XI O-UT- AG-E.-------------

SUMMARY

EXAMINATION AREA CATGY NDE - INSTRUCTIONS NUMBER IDENTIFICATION ITEM NO METH j 1 2 1 2 3 1 2 **CALIBRATION BLOCK-*

CHEMICAL & VOLUME CONTROL TCX-CSAHLD-01 952300 CS-2-SB-104-HXWS1 D-A VT- 1 NA SADDLE. DWG 5665 LETDOWN HX SUPPORTS WELDED D1. 10 2 - C ATTACHMENTS RS1 790SB

APPENDIX A APPENDIX A RELIEF REQUESTS It is impractical within the limitations of the CPNPP plant design, geometry and accessibility for TU Electric to meet certain requirements of Articles IWA, IWB, IWC, IWD and IWF of the Code. Compliance with these requirements would result in hardships or unusual difficulties without a compensating increase in the level of plant quality or safety. Therefore, pursuant to IOCFR50.55a(g)(5)(iii), the relief requested from the Inservice Inspection requirements of IOCFR50.55a(g)(4)(I) is discussed in detail in this appendix. Relief is requested for the second 120 month interval of the CPSES inservice inspection program.

Appendix A - Page I of 3

APPENDIX A STATUS OF CPSES UNIT 2 ISI PLAN / RELIEF REQUESTS (UNIT2: 1998 EDITION OF ASME CODE SECTION XI TO 2000 ADDENDA INTERVAL START DATE - AUGUST 3, 2004. SECOND INTERVAL)

REVISION RELIEF SUBJECT SUBMITTED TO NRC APPROVAL OR DENIAL REQUEST ISSUED Revision 0 Unit 2 ISI Program Plan TXX-04131, 07/28/2004 0 CPSES-200401770 Revision I Unit 2 ISI Program Plan TXX-05137, 08/23/2005 CPSES-200501743 Revision 2 Unit 2 ISI Program Plan TXX-06128 2 CPSES-200601367 Revision 3 Unit 2 ISI Program Plan TXX- 3 CPSES-2008 A-I Re-submittal of the Relief Request for alternative TXX-05204, t2/l 5/2005 Approved, 10/5/2006 RI-ISI examinations for selected class I and 2 CPSES-200502480 CPSES-200602151 piping welds ( ASME Code Categories B-F, B-J, TXX-06101, 6/28/2005 NRR- 10580 C-F-I, and C-F-2) CPSES-200601 B-1 Relief is requested to allow the use of Code Case TXX-04165, 09/15/2004 Approved, 4/29/2005 N-566-2 for leakage at bolted connections CPSES-2004021 10 NRR-10435, B-2 Relief is requested for a reduction in examination TXX -07177, 12/19/2007 coverage (>10%) for a RC pipe to valve weld. CP-200700181 (TCX-1-4105-6)

B-3 Relief is requested for a reduction in examination Pending issuance of TXX letter

'coverage (>10%) for a RC pipe to flange weld (TCX- 1-4501 - 1)

B-4 Relief is requested for allowing the application of TXX-07095, 8/22/2007 full structural weld overlays for the nozzle-to-safe CPSES-200701302 end dissimilar metal and safe end-to-piping stainless steel butt welds associated with the Pressurizer and connected piping B-5 Relief is requested for the repair/replacement of the TXX-07176, 12/19/2007 CRDM canopy seal welds and for not performing CP-200700178 surface examination (PT) per Code Case N-504-2.

C- I Relief is requested for a reduction in examination TXX-05203, 12/0112005 Approved, 3/15/2007 coverage (>10%) for the Excess Letdown Fleat CPSES-200502474 CPSES-200700621 Exchanger head to flange weld. NRR-10618 (TCX-2-11 10-1)

General Notes:

1/ . A revision to the ISI Plan is usually issued after completion of the each refueling outage and prior to the next refueling outage. ISI Plan revisions include items such as rescheduled exaims and updated drawings. A request for relief from the ASME Code is requested separately from Plan revisions. A relief request is assigned a unique identifier, which consists of a letter representing the Code Subsection, followed by a sequential number. (e.g., B-6 is assigned as the sixth request for relief from a requirement in Subsection IWB.)

2. Copies of the ISI Program Plan Revisions are forwarded to the a) NRC Document Control Desk, b) NRC Region IV. c) NRC Resident Inspectors, d) NRR Project Manager, and e) Texas Depairtment of Licensing and Regulation (TDLR) and f) authorized Nuclear Inservice Inspector (ANII).

Appendix A Page 2 of 2

APPENDIX B APPENDIX B UNIT VT-2 TEST PACKAGES 2*d INTERVAL, SECOND PERIOD PACKAGE # DESCRIPTION OWNER DATE STATUS COMMENTS 2-AF-2-2-1 MDAFWP-01 2RFI I @ POWER (PM 343599)

TEST LOOP 2-AF-2-2-2 MDAFWP-01 2RFI I OUTAGE (PM 343600)

(SG 1/2) 2-AF-2-2-3 MDAFWP-02 2RFI I OUTAGE (PM 343601)

(SG 3/4) 2-AF-2-2-4 TDAFWP 2RF1I OUTAGE (PM 343602) 2-AF-2-2-5 AF OPS 2RF1 I @ POWER (PM 343603) 2-CC-2-2-1 CC TRAIN A ORC 2RF10 @ POWER (PM 343604) 2-CC-2-2-2 CC TRAIN B ORC 2RF10 @ POWER (PM 343605) 2-CC-2-2-3 CC IRC 2RFI0 OUTAGE (WO 3-07-343606-01) 2-CH-2-2-1 CH 2RF10 @ POWER Separated into 2 pkgs; (a, b) (PM 343607 & PM 346274) 2-CS-2-2-1 CS ORC 2RFIO @ POWER Separated into 2 pkgs; (PM (a,b) 343608 & PM 346275) 2-CS-2-2-2 CS PDP 2RF10 @ POWER (PM 343609) 2-CS-2-2-3 CS IRC 2RF10 OUTAGE Separated into 2 pkgs (PM (al, a2, b) 343610 & PM 343945).

Former PM has two parts. (al & a2)

Appendix B - Page lof3

APPENDIX B UNIT VT-2 TEST PACKAGES.

2.d INTERVAL, SECOND PERIOD PACKAGE# DESCRIPTION OWNER DATE STATUS COMMENTS 2-CS-2-2-4 CS BORATE 2RF10 'Separated into 3 pkgs; 2 @ POWER (PM (a,b,c) 343611 & PM 343612 & I during the OUTAGE ( PM 343613) 2-CT-2-2-1 CT TRAIN A 2RF10 @ POWER (PM 343615)

(al, a2) 2-CT-2-2-2 CT TRAIN B 2RF10 @ POWER (PM 343616) 2-CT-2-2-3 CT NORMAL OPS 2RFI 0 @ POWER (PM 343617) 2-DD-2-2-1 DD 2RF10 @ POWER PM 343618 & OUTAGE (PM (al,a2,b,) _343614) 2-DO-2-2-1 DO 2RF1 I @ POWER - 2 DO pkgs (PM 343619 &

(a,b) PM 343620) and @POWER - 2 DG pkgs 2-DG-2-2-1 DG 2RFI1 (PM 343623 & PM 343624)

(a,b) 2-FW-2-2-1 FW ORC 2RFI I @ POWER (PM 343627) 2-FW-2-2-2 FW IRC 2RFlI OUTAGE (PM 343628):

2-MS-2-2-1 MS ORC 2RF I @ POWER (PM 343629) and during (a,b) OUTAGE (PM 343621-01); MS Line to

_ __Terry Turbine) 2-MS-2-2-2 MS IRC 2RF] I OUTAGE (PM 343630) 2-RC-2-2-1 RC CLASS I 2RF10 OUTAGE Separated into 5 pkgs.(PM (a,b,c,d,e) / 343635 thru PM 343638 and PM 343631)

Appendix B - Page 2 of 3

APPENDIX B UNIT VT-2 TEST PACKAGES 2nd INTERVAL, SECOND PERIOD PACKAGE# DESCRIPTION OWNER DATE STATUS COMMENTS 2-RC-2-2-2 RC CLASS I 2RF1 I OUTAGE Separated into 5 pkgs (PM (a,b,c,d,e) 343635 thru PM 343638 and PM 343631) 2RF12 OUTAGE Separated into 5 pkgs ( PM 2-RC-2-2-3 RC.CLASS 1 343635 thru PM 343638 and PM 343631)

(a,b,c,d,e) 2-RC-2-2-4 RC CLASS 2 2RF12 OUTAGE Separated into 4 pkgs. (PM (a,b,c,d) 343639 thru PM 343642) 2-RH-2-2-1 RH TRAIN A 2RF12 OUTAGE (PM 343643) 2-RH-2-2-2 RH TRAIN B 2RF12 OUTAGE (PM 343644) 2-RH-2-2-3 RH/RC TIE 2RF12 OUTAGE (PM 343645) 2-SI-2-2-1 SI NORM. OPS 2RF12 @ POWER (PM 343646) 2-SI-2-2-2 SI PUMPS 2RF12 OUTAGE/@ POWER (a,b,c,d,e,f,g, Separated into 8 pkgs, with 6 @ POWER h) (PM 3436471 thru PM 343651 & PM 346056 and 2 for OUTAGE (PM 343652 and 343653). Operations TSP req'd for 4 PMs 2-SI-2-2-3 SI ACCUM. 2RF 12 OUTAGE (PM 343654)

Scaffold required.

2-SW-2-2-1 SW TRAIN A 2RF1 I @ POWER (PM 343655) 2-SW-2-2-2 SW TRAIN B 2RFI I @ POWER (PM 343656)

Appendix B - Page 3 of 3

APPENDIX C APPENDIX C ADOPTED CODE CASES NRC APPROVAL CODE CASE SUBJECT DOCUMENT A N-416-1 Alternative Pressure Test Requirement for Welded R.G.1.147 Rev 13 Repairs or Installation of Replacement Items by Welding B N-435-1 Alternative Examination Requirements for Vessels with R.G.1.147 Rev. 14 Wall Thicknesses 2 inches or less C N-457 Qualification Specimen Notch Location for Ultrasonic R.G.1.147 Rev. 13 Examination of Bolts and Studs D N-460 Alternative Examination Coverage for Class I and Class R.G.1.147 Rev. 15 2 Welds E N-461-1 Alternative Rules for Piping Calibration Block R.G.1.147 Rev. 13 Thickness F N-481 Alternative Examination Requirements for Cast R.G.l.147 Rev. 14 Austenitic Pump Casing G N-491-2 Alternative Rules for Examination of Class 1, 2, 3 and R.G.1.147 Rev. 15 MC Component Supports of Light-Water Cooled Power Plants H N-498-4 Alternative Requirements for 10-Year System R.G.1.147 Rev. 15 Hydrostatic Testing for Class 1, 2 and 3 Systems I N-504-2 Alternative Rules for Repair of Class 1, 2, and 3 R.G.1.147 Rev. 14 Austenitic Stainless Steel Piping II N-513-2 Evaluation Criteria for Temporary Acceptance of Flaws R.G. 1.147 Rev.15 in Moderate Energy Class 2 or 3 Piping J N-522 Pressure Testing of Containment Isolation Piping R.G.1.147 Rev. 15 K N-524 Alternative Requirements for Longitudinal Welds in R.G.1.147 Rev. 13 Class I and 2 Piping L N-526 Alternative Requirements for Successive Inspections of R.G. 1.147 Rev. 15 Class I and 2 Vessels M N-528-1 Purchase, Exchange, or Transfer of Material Between 'R.G.1.147 Rev. 15 Nuclear Plant Sites N N-532-1 Alternative Requirements for Repair and Replacement R.G.1.147 Rev. 14 Documentation Requirements and In-service Summary Report Preparation and Submission as Required by IWA-4000 and IWA-6000 Appendix C - Page 1 of 3

APPENDIX C ADOPTED CODE CASES NRC APPROVAL CODE CASE SUBJECT DOCUMENT 0 N-533-1 Alternative Requirements for VT-2 Visual Examination R.G.I.147 Rev. 15 of Class 1, 2 and 3 Insulated Pressure-Retaining Bolted Connections P N-552 Alternative Methods - Qualification of Nozzle Inside R.G.1.147 Rev. 15 Radius Section From-the Outside Surface Q N-566-2 Corrective Action for Leakage Identified at Bolted R.G.1.147 Rev. 15 Connections R N-573 Transfer of Procedure Qualification Records Between R.G.1.147 Rev. 15 Owners S N578 Risk Informed Requirements for Class 1, 2, and 3 NRC Approval Recd Piping, Method B RR A-I Approved T N-597-2 Requirements for'Analytical Evaluation of Pipe Wall R.G. 1.147 Rev 15 Thinning T1 N-613-1 Ultrasonic Examination of Penetration Nozzles in R.G. 1.147 rev.15 Vessels, Examination Category B-D, Item Nos. B3.10 and B3.90, Reactor Nozzle-to-Vessel Welds, Figs. IWB-2500-7(a), (b), and (c)

R.G&l.147 Rev. 15 U N-616 Alternative Requirements for VT-2 Visual Examination of Classes 1,2, 3 Insulated Pressure Retaining Bolted Connections R.G.1.147 Rev. 15 V N-639 Alternative Calibration Block Material R.G.1.147 Rev. 15 VI N-647 Alternative to Augmented Examination Requirements of IW-2500 R.G.1.147 Rev. 15 W N-648-1 Alternative Requirements for Inner Radius Examination of Class I Reactor Vessel Nozzles R.G. 1.147 Rev. 15 X N-649 Alternative Requirements for IWE-5240 Visual Examination R.G. 1.147 Rev. 15 Y N-652-1 Alternative Requirements to Categorize B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria R.G. 1.147 Rev. 15 Z N-661 Alternative Requirements for Wall Thickness Restoration of Classes 2 and 3 Carbon Steel Piping for Raw Water Service R.G.l.147 Rev. 15 AA N-685 Lighting Requirements for Surface Examination Appendix C L Page 2 of 3'

APPENDIX C ADOPTED CODE CASES NRC APPROVAL CODE CASE SUBJECT DOCUMENT BB N-686 Alternative Requirements for Visual Examinations, R.G. 1.147 Rev. 15 VT-1, VT-2, and VT-3.

CC N-695 Qualification for Dissimilar Metal Welds R.G. 1.147 Rev. 15 DD N-696 Qualification Requirements for Appendix VIII Piping R.G.I.147 Rev. 15 Examinations Conducted from the Inside Surface NOTES:

Code Cases used in 2RF08 - ( B,D,L,M,N,O,U)

Code Cases used in 2RF09 - (B,DL,M,N,O,U,X)

Code Cases proposed for 2RFI 0 - (B,D,L,M,N,O,U,X)

Appendix C - Page 3 of 3

APPENDIX D APPENDIX D ULTRASONIC CALIBRATION BLOCKS Calibration Block Size Block No. Pipe Schedule Material System / Component SA-533 Gr. B, TBX-1 12.25"L x 6.00"W x 3.50"T Class-1 C.S. Pressurizer Reactor Coolant Pipe TBX-2 8.00"L x 3.00"W x 3.00"T A351 CF8M (1982)

TBX-3 3" sch. 160 A376 Type-316 Piping Control Rod Drive Mech.

TBX-4 4" sch. 160 A376 Type-304 Housings TBX-5 6" sch. 160 A376 Type-304 Piping TBX-6 6" sch. 40S A376 Type-304 Piping Letdown Reheat Heat TBX-7 8" sch. 40S A376 Type-304 Exchanger Excess Letdown Heat TBX-8 8" sch. 140 A376 Type-316 Exchanger Regenerative Heat TBX-9 10" sch. 140 A376 Type-304 Exchanger TBX-10 10" sch. 40S A312 Type-316 Piping TBX-11 12" sch. 40S A312 Type-316 Piping TBX-12 12" sch. 140 A376 Type-304 Piping TBX-13 14" sch. 140 A376 Type-316 Piping TBX-14 14" sch. 40 A358 Type-316 Piping TBX-15 16" sch. 40S A312 Type-304 Piping Seal Water Heat TBX-16 9.00"L x 4.00"W x .468"T A240 Type-304 Exchanger nn-nrliý n - P-n I nf

APPENDIX D ULTRASONIC CALIBRATION BLOCKS Calibration Block Size Block No. Pipe Schedule Material System / Component TBX-17 8" sch. 80 A106 Grade-B C.S. Piping TBX-18 8" sch. 160 A312 Type-304 Piping TBX-19 14" sch. 160 A312 Type-304 Piping TBX-20 16" sch. 80 A106 Grade-B C.S. Piping TBX-21 18" sch. 80 A106 Grade-B C.S. Piping TBX-22 24" sch. 80 A106 Grade-B C.S. Piping TBX-23 1.50 sch. 160 A376 Type-316 Piping TBX-24 2" sch. 160 A376 Type-316 Piping R.V. Stud & R.C. Pump TBX-25 7" Lg. Stud SA-540 C.S. Bolting (1982)

SA-533 Grade-A Reactor Vessel Bottom TBX-26 22.10"L x 6.00'W x 6.30"T Class-1 C.S. Head SA-533 Grade-A Steam Generator TBX-27 20.8"L x 6.00"W x 4.00"T Class-1 C.S. Secondary side SA-508 Grade-A Steam Generator Channel TBX-28 19.10"L x 6.00"W x 5.45"T Class-1 C.S. Head to Tubesheet SA-533 Grade-A Reactor Vessel Closure TBX-29 30.10"L x 6.00"W x8.60"T Class-1 C.S. Head TBX-30 13.00"L x 4.00"W x 1.00"T SA-240 Type-304 Residual Heat Exchanger Horizontal Letdown Heat TBX-31 9.00"L x 4.00"W x.625"T SA-240 Type-304 Exchanger TBX-32 9.00"L x 4.00"W x .312"T SA-240 Type-304 Volume Control Tank Aooendix D - Paoe 2 of 5

APPENDIX D ULTRASONIC CALIBRATION BLOCKS Calibration Block Size Block No. Pipe Schedule Material System / Component SA-106 Grade-B TBX-33 32'x 1.25"T C.S. 32" Main Steam SA-333 Grade-B TBX-34 6" sch. 120 C.S. Piping SA-333 Grade-B TBX-35 6" sch. 80 C.S. Piping SA-106 Grade-B TBX-36 6" sch. 160 C.S. Piping SA-106 Grade-B TBX-37 8" sch., 160 C.S. Piping SA-106 Grade-B TBX-38 18" sch. 140 C.S. Piping SA-106 Grade-B TBX-39 24" sch. 100 C.S. Piping SA-515-74B Grade-

,TBX-40 13.00"L x 4.00"W x 1.502"T 70 Pressurizer Skirt Weld SA-106 Grade-B R.C. Drain Tank Heat TBX-41 12' sch. 30 C.S. Exchanger SA-333 Grade-B Excess Letdown Heat TBX-42 8" sch. 40S C.S. Exchanger R.C. Drain Tank Heat TBX-43,- 12" sch. 20 A-312 Type-304 Exchanger TBX-44 3" sch. 80 SA-312 Type-304 Piping TBX-45 4" sch. 80 SA-312 Type-304 Piping TBX-46 14" sch. 40 SA-312 Type-304 Piping TBX-47 14" x .500"T SA-312 Type-304 Piping Appendix D - Page 3 of 5

APPENDIX D ULTRASONIC CALIBRATION BLOCKS Calibration Block Size Block No. Pipe Schedule Material System / Component TBX-48 16" sch. 30 SA-312 Type-304 Piping TBX-49 18" x .375"T SA-312 Type-304 Piping TBX-50 24" sch. 20 SA-312 Type-304 Piping TBX-51 12" sch. 80 SA-312 Type-304 Piping TBX-52 24"L x 6.812" dia. SA-540 Gr. B24 RPV Stud (1993)

TBX-53 9.25"L x 2.125" dia. SA-193Gr.B7 SI Pump Stud TBX-54 35"L x 4.5" dia. SA-540 Gr. B24 RC Pump Stud (1993)

TBX-55 5.5" x 4.5" x 5.8" SA-508 Cl. 2 Pr Spr Nozzle IR TBX-56 11" x 4.5" x 9.93" SA-508 Cl. 2 SG FW Nozzle IR Reactor Coolant Pipe TBX-57 12" x 12" x 2.7" A-351 Gr. CF8M (1993)

TBX-58 7-1/2" x 7" x 8' SA-508 CI. 2 Pr Surge Nozzle IR TBX-59 7" x 7" x 7" SA-508 Cl. 2 Pr. Sfty / RIf Nozzle IR TBX-60 16.07"L x 16.24"/7.65"W x 6.0"T SA-508 Cl. 3a New SG Primary Nozzle IR TBX-61 15.29"L x 13.39"/7.76"W x 4.0"T SA-508 Cl. 3a New SG FW Nozzle IR TBX-62 11.81 "L x 6.0"W x 3.0"T SA-508 Cl. 3a New SG Shell to TS New SG FW / AFW Nozzle TBX-63 17.32"L x 6.0"W x 5.0"T SA-508 CI. 3a to Vessel New SG TS to Channel TBX-64 17.32"L x 6.0"W x 5.0"T SA-508 Cl. 3a Head TBX-65 13.78"L x Pipe x 4.83"T SA-336 F 316 LN New SG Safe-end TBX-RV-1 45.00"L x 11.00"W x 11.00"T SA-533 Gr. B Cl. 1 Basic 11" RPV Block TBX-RV-2 36.00"L x 9.00"W x 9.00"T SA-533 Gr. B Cl. 1 Basic 9" RPV Block Appendix D - Page 4 of 5

APPENDIX D ULTRASONIC CALIBRATION BLOCKS Calibration Block Size Block No. Pipe Schedule Material System / Component TBX-RV-3 28.00"L x 6.00"W x 7.00"T SA-533 Gr. B CI. 1 Basic 7" RPV Block TBX-RV-4 20.00"L x 6.00"W x 5.00"T SA-533 Gr. B Cl. 1 Basic 5" RPV Block TBX-RV-5 33.00"L x 11.00"W x 11.00"T SA-533 Gr. B Cl. 1 RPV Flange Ligament TBX-RV-6 10.00"L x 6.00"W x 3.00"T SA-503 Cl. 2 RPV Safe End TBX-RV-7 41.50"L x 7.00"W x 15.25"T ASTM A508 CI. 2 RPV Shell TCX-RV-1 45.00"L X11.00"W x 11.00"T SA-533 Gr. BCI. 1 Basic 11" RPV Block TCX-RV-2 36.00"L x 9.00"W x 9.00"T SA-533 Gr. B Cl. 1 Basic 9" RPV Block TCX-RV-3 28.00"L x 6.00"W x 7.00"T SA-533 Gr. B Cl. 1 Basic 7" RPV Block TCX-RV-4 20.00"L x 6.00"W x 5.00"T SA-533 Gr. B Cl. 1 Basic 5" RPV Block TCX-RV-5 33.00"L x 11.00"W x 11.00"T SA-533 Gr. B CI. 1 RPV Flange Ligament TCX-RV-6 10.00"L x 6.00"W x 3.00"T SA-503 Cl. 1 RPV Safe End SS-CB-1 1/2"T to 3"T x 3"W step SA-312 Type 304 Stainless Steel Alt Block CS-BC-1 1/2"T to 3"T x 3W step SA-516 Gr. 70 Carbon Steel Block DM-CB-1 9"L x 4"W x 2"T SA-312 / SA-516 Dissimilar Metal Alt Block PDI-01 14.00"L x 2.00"W x 14.00"T A-508 Cl. 2 RPV Block PDI-02 9.5"L x 2.00"W x 4 Steps SA-516 Gr. 70 C.S. Piping Alt Block PDI-03 9.5"L x 2.00"W x 4 Steps SA-312 Type 304 S.S. Piping Alt Block PDI-04 9.5"L x 2.00"W x 4 Steps SA-312 Type 316 S.S. Piping Alt Block SAP 10294 6.797"dia x 57.687" long SA-540 Gr. B24 RPV Closure Stud Steam Generator Inner SG-IR 12.00"L x 12.00"W x 1.5"T Lucite Radius APoendix D - Paae 5 of 5

APPENDIX E APPENDIX E TCX ISOMETRIC DRAWINGS TABLE TCX-1-1100 2 TCX-1-1100A 2 TCX-1-1200 Sh. 1 I TCX-I-1200 Sh. 2 1 TCX-1-1300 I TCX-1 -1300A I TCX-1 -1400 2 TCX-1-2100 1 TCX-1-3100 I TCX-1-4100 1 TCX-1-4101 I TCX-1-4102 3 TCX-1 -4103 3 TCX-1 -4104 1 TCX- 1-4105 1 TCX-1-4106 1 TCX-1-4107 2 TCX-1-4108 2 TCX-1 -4109 1 TCX-1-4110 1 TCX- 1-4200 1 TCX-1 -4201 3 TCX-1 -4202 4 TCX-1-4203 3 TCX-1 -4204 1 TCX-1-4205 2 TCX- 1-4206 1 TCX-1-4207 1 TCX-1-4300 1 TCX-1-4301 2 TCX-1-4302 2 TCX-1.-4303 4 A

ýA~- 'P . I nf r

APPENDIX E TCX ISOMETRIC DRAWINGS TABLE TCX RN TCX-1-4304 I

TCX-1 -4305 1 TCX-1-4306 I

TCX-1 -4307 1 TCX- 1-4308 I

TCX- 1-4400 1 TCX-1-4401 I

TCX- 1-4402 2 TCX- 1-4403 2 TCX- 1-4404

.2 TCX- 1-4405 1

TCX- 1-4406 1

TCX- 1-4407 2

TCX-1.-4408 1

TCX- 1-4409 I

TCX-1-4500 2

TCX-1.-4501 1

TCX-1 -4502 1

TCX-1-4503 I

TCX-1-4504 I TCX-1 -4505 4 TCX-1-4506 4 TCX-1.-4507 2 TCX-1-4600 2 TCX- 1-5100 1 TCX- 1-5100AA TCX-2-1 100 1 TCX-2-1 110 1 TCX-2-1120 I TCX-2-1130, 1 TCX-2-1140 1 Avwý,,vli 7P*- P - ') ,,

1,.

APPENDIX E TCX ISOMETRIC DRAWINGS TABLE TCX-2-1150 1

TCX-2-1180 2

TCX-2-2 100 3

TCX-2-21 01 2

TCX-2-2 102 2

TCX-2-2103 1

TCX-2-2200 3

TCX-2-2201 2

TCX-2-2202 I

TCX-2-2203 3

TCX-2-2204 2

TCX-2-2300 3

TCX-2-2301 2

TCX-2-2302 3

TCX-2-2303 3

TCX-2-2400 3

TCX-2-2401 2

TCX-2-2402 2

TCX-2-2403 2

TCX-2-2500 3

TCX-2-2501 3

TCX-2-2520 2

TCX-2-2521 1

TCX-2-2530 2

TCX-2-2531 1

TCX-2-2532 I

TCX-2-2533 2

TCX-2-2534 2

TCX-2-2535 2

TCX-2-2536 2

TCX-2-2537 I

TCX-2-2538 I

Arwmerncii F. - Pave 31of 5

APPENDIX E TCX ISOMETRIC DRAWINGS TABLE TCX # 1 TCX-2-2538A I TCX-2-2539 I TCX-2-2539A I TCX-2-2540 2 TCX-2-2541 2 TCX-2-2542 I TCX-2-2550 I TCX-2-2551 I TCX-2-2560 3 TCX-2-2561 2 TCX-2-2562 2 TCX-2-2563 1 TCX-2-2564 I TCX-2-2565 1 TCX-2-2566 2 TCX-2-2566A 1I TCX-2-2567 1 TCX-2-2568 I TCX-2-2569 I1 TCX-2-2570 1 TCX-2-2571 1 TCX-2-2572 1 TCX-2-2573 I TCX-2-2574 1 TCX-2-2575 2 TCX-2-2576 2 TCX-2-2577 .2 TCX-2-2578 2 TCX-2-2579 2 TCX-2-2580 2 TCX-2-2581 2 TCX-2-2582 2 Amedix E - Pane 4 of 5

APPENDIX E TCX ISOMETRIC DRAWINGS TABLE TCX TCX-2-2583 2 TCX-2-2584 I TCX-2-2585 TCX-2-2586 TCX-2-3100 1 TCX-2-3110 TCX-2-3140 1 Arm-ndix E- Page 5 of 5

APPENDIX F APPENDIX F RECORD OF REVISIONS Revision 0 - Original issue Revision 1 - Added adopted Code Cases in Appendix C and corrected the typographical error in the ISI Summary Table of Section 4.0.(There is no Attachment 1 to Appendix F.)

Revision 2 - Identified owner as Owner/Designated Agent in Sections 1.3 and 1.10

- Added information relative to RI-ISI for selected class 1 and 2 piping welds

- Added information relative to drawings in Section 2.2

- Revised section 4.3 for snubbers

- Revised section 5.3 for insulated bolted connections

- Revised section 4.0 for the Section XI Summary Table and Sections 4.1, 4.2, and 4.3 (ISI Examination Tables for class 1, 2, and 3 components) to reflect completed, rescheduled, removed, and added exams per 2RF08 and the RI-ISI evaluation/update for the third period of the first interval for Unit 2. The summary numbers (examination items) affected by this revision are listed in Attachment 2 to Appendix F of this Plan.

- Updated Appendix A to reflect the current status of relief requests

- Updated Appendix C to reflect the current list of approved, adopted Code Cases

- Updated Appendix F to add the record of revision and corresponding Attachment 2 to the Appendix for Plan revision 2.

Revision 3 - Made editorial changes to various sections identifying the owner as Luminant and the plant as CPNPP

- Made editorial changes to the Table of Contents to match respective sections

- Revised section 1.4 for scope noting that the RI-ISI program for ASME Code Class 1 and 2 welds had been accepted by the NRC as an alternative to requirements in ASME Section XI

- Removed the metric notation in section 1.6.

- Added more detail in section 2.3 concerning system pressure tests.

- Made editorial changes in sections 3.2, 3.3, and 4.0 Clarified paragraph 3.2.3 to read "... Appendix IV of the Code."

Appendix F - Page 1 of 2

APPENDIX F RECORD OF REVISIONS Revision 3 - Revised section 4.4 to more clearly state the testing requirements for steam (cont'd) generator tubes and to remove LAR 98-009, which does not apply.

- Revised paragraph 6.0 to read "... IWA-2420(b)(5)."

- Revised the Section XI Summary Table in section 4.0 for Category F-A, Item F1l.20, Category F-A, Item F1l.40, Category R-A, and other categories to reflect completed and rescheduled examinations from 2RF09.

Revised sections 4.1, 4.2, and 4.3 (ISI Examination Tables for class 1,2, and 3 components) to reflect completed and rescheduled examinations from 2RF09.

The summary numbers (examination items) affected by this revision are listed in Attachment 3 to Appendix F of this Plan.

Revised Summary number 108600 to reflect this examination as R-A, Item R1.20 in the listing of ASME Code Class 2 welds in the Class 2 Tables of scheduled/

completed components.

Updated Appendix A to reflect the current status of relief requests.

Added Appendix B to reflect VT-2 system pressure test listing.

- Updated Appendix C to reflect the current status of approved, adopted Code

- Updated Appendix D to reflect the current listing of ultrasonic calibration blocks.

- Updated Appendix F to add the record of revision and corresponding Attachment 3 to the Appendix for Plan revision 3.

Appendix F - Page 2 of 2

Revision 2 - AFFECTED

SUMMARY

NUMBERS :

The following summary numbers identify examination items completed during the first refueling outage (2RF08) of the first period, second interval.

003100 669400 722100 862800 014400 669450 722200 862850 014500 669500 722300 863100 014800 669600 725300 863150 015300 669650 750000 863900 020200 669700 750400 863950 020900 669800 810500 864000 021000 669900 810550 864050 022550 671900 810700 864200 048800 672000 .811800 864250 094244 672400 811850 864500 094249 683200 814000 864550 094282 683400 814050 864600 094300 683450 814800 864650 094400 696300 814850 864700 094800 697000 815000 864750 094900 706900 815050 865200 095300 710860 815100 865300 183900 713200 815150 865800 184000 713400 815500 865850 184500 713450 815550 866100 186100 713500 816600 866300 500700 713550 816650 866400 600000 713800 816800 866450 6036010 713850 816850 866800 603700 714000 817100 866850 603800 714050 818600 866900 603900 714100 819000 866950 604100 714150 819500 897400 605400 714500 820000 897450 605500 714550 820100 897600 608800 716500 820200 897650 608900 716550 820250 898200 618800 718200 856600 898250 618900 718300 856650 898400 619200 718400 856700 898450 640530 718500 856750 898500 640540 718550 856800 898550 640550 718600 856850 898600 640560 718700 857050 898650 640570 718800 857100 898700 640580 718900 857200 898750 640830 719000 857300 899300 653400 719400 859250 899350 655400 719600 862300 900200 655700 719650 862350 .900250 655800 719900 862500 900300 655900 719950 862550 900350 669200 721200 862700 900500 669300 721900 862750 900550 Appendix F Attachment 2 - Page 1of 2

Revision 2 - AFFECTED

SUMMARY

NUMBERS:

The following summary numbers identify examination items that have been added to the schedule based on the RI-ISI Evaluation/Update for the third period, first interval:

108500 156800 215400 312921 108600 156900 215400 312937 108700 157000 216600 312947 124200 192200 216700 312948 124300 192300 217000 312951 124400 192900 217100 312952 141000 193000 221500 312960 141100 215200 221000 312961 141200 215300 221900 312976 The following summary numbers identify examination items that have been removed from the schedule based on the RI-ISI Evaluation/Update for the third period, first interval:

312911 312937 312944 312965 312914 312942 312947 312975 The following summary numbers identify examination items that have been rescheduled:

002800 094282 313100 751400 094244 096400 313200 952200 094249 313000 676600 952300 Appendix F Attachment 2- Page 2 of 2

Revision 3 - AFFECTED

SUMMARY

NUMBERS:

The following summary numbers identify examination items completed during the second refueling outage (2RF09).

of the first period, second interval.

002800 157000 620500 693600 009100 158100 620600 697100 009300 158500 620800 697400 009600 158600 620850 697450 009650 160900 640410 697700 009700 162000 640420 697750 009750 162800 640430 697800 009800 162900 640440 697850 009850 165700 640450 698400 009900 166900 640460 698500 009950 167000 640470 698550 010000 192200 640710 699600 010050 192300 640720 699650 010100 192900 640730 715200 015900 193000 640740 715250 016000 312960 640750 715300 016100 312961 640760 715350 061500 313000 640770 721700 061800 313100 640780 721750 076400 313200 640790 751401 076500 314000 640800 751402 076600 501000 640810 751403 096400 620300 640900 952200 156800 620350 693500 952300 156900 620400 693550 Summary Numbers 061700 and 061800 are examination items that have been rescheduled Appendix F Attachment 3 - Page I of I

Retrieved from "https://kanterella.com/w/index.php?title=CP-200800348,_Transmittal_of_Inservice_Inspection_Program_Plan,_Revision_3,_(ASME_Code_Section_XI_1998_Edition,_1999_and_2000_Addenda,_Interval_Start_Date_August_3,_2004,_Second_Interval)&oldid=2571083"