ML072560047
ML072560047 | |
Person / Time | |
---|---|
Site: | Browns Ferry ![]() |
Issue date: | 08/24/2007 |
From: | Langley D Tennessee Valley Authority |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
Download: ML072560047 (145) | |
Text
Tennessee Valley Authority, Post Office Box 2000, Decatur, Adabama 35609-2000 Au'gust 24, 2007 10 CFR 50.55a U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Mail Stop: OWFN P1-35 Washington, D.C. 20555-0001 Gentlemen:
In the Matter of ) Docket No. 50-296 Tennessee Valley Authority BROWNS FERRY NUCLEAR PLANT (BFN) - UNIT 3 - AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) SECTION XI, INSERVICE INSPECTION (ISI) PROGRAM, THIRD TEN-YEAR INSPECTION INTERVAL -
REQUESTS FOR RELIEF 3-ISI-22 AND 3-ISI-23 In accordance with 10 CFR 50.55a(g) (5) TVA is requesting relief from certain inservice inspection requirements in Section XI of the ASME Boiler and Pressure Vessel Code. This letter submits BFN Unit 3 requests for relief 3-ISI-22, and 3-ISI-23.
Request for relief 3-ISI-22, addresses one (1) Reactor Water Recirculation (RECIRC) system full penetration piping to valve weld. The design configuration of the component precludes a 100 percent ultrasonic (UT) examination of the required volume for the full penetration weld.
Request for relief 3-ISI-23, addresses nine (9) Reactor Pressure Vessel (RPV) nozzle-to-vessel full penetration welds and seven (7) RPV nozzle inner radius sections. The design configuration of the RPV nozzle-to-vessel welds precludes a 100 percent ultrasonic (UT) examination of the required volume for the full penetration welds of the nozzles. 7 7
U.S. Nuclear Regulatory Commission Page 3 August 24, 2007 Enclosures cc (Enclosures):
Mr. Malcolm T. Widmann, Branch Chief U.S. Nuclear Regulatory Commission Region II Sam Nunn Atlanta Federal Center 61 Forsyth Street, SW, Suite 23T85 Atlanta, Georgia 30303-8931 NRC Resident Inspector Browns Ferry Nuclear Plant 10833 Shaw Road Athens, Alabama 35611-6970 Ms. Eva A. Brown, Project Manager U.S. Nuclear Regulatory Commission One White Flint, North (MS 08G9) 11555 Rockville Pike Rockville, Maryland 20852-2739
U.S. Nuclear Regulatory Commission Page 2 August 24, 2007 of this letter contains request for relief 3-ISI-22. Previous ASME Section XI Code examinations of RECIRC weld GR-3-63 cited in request for relief 3-ISI-22 were performed prior to rulemaking for 10 CFR 50.55a(b) (2) (xv) (A) (2).
This weld received 100 percent Code coverage in accordance with earlier Code requirements and therefore, did not require a request for relief. contains request for relief 3-ISI-23. Request for relief 3-ISI-23 is consistent with the BFN Unit 3 Second Ten-Year ISI inspection interval requests for relief 3-ISI-7, Revision 0, 3-ISI-14, and 3-ISI-15 by letters dated March 26, 1999, and May 9, 2003 respectively. NRC approved these requests by letters dated August 2, 1999, and February 11, 2004.
There are no new regulatory commitments in this letter. If you have any questions, please contact me at (256) 729-2636.
D. T. Langley L Manager of Licensing and Industry Affairs cc: See Page 3
ENCLOSURE 1 TENNESSEE VALLEY AUTHORITY BROWNS FERRY NUCLEAR PLANT (BFN)
UNIT 3 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
SECTION XI, INSERVICE INSPECTION (ISI) PROGRAM (THIRD TEN-YEAR INSPECTION INTERVAL)
REQUEST FOR RELIEF 3-ISI-22 (SEE ATTACHED)
TENNESSEE VALLEY AUTHORITY BROWNS FERRY NUCLEAR PLANT (BFN)
UNIT 3 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
SECTION XI,INSERVICE INSPECTION (ISI) PROGRAM (THIRD) TEN-YEAR INSPECTION INTERVAL)
REQUEST FOR RELIEF 3-ISI-22 Executive Summary: This request for relief addresses one (1)
Reactor Water Recirculation (RECIRC) System, Full Penetration Piping Weld examined in the first period (Cycle 12, Spring 2006) of the Third Ten-Year ISI inspection interval.
The subject weld was examined with the latest ultrasonic (UT) techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI) Program, as mandated by 10 CFR 50.55a(g) (4) and 10 CFR 50.55a(g) (6)(ii)(C).
A UT examination was performed on this piping weld of the accessible areas to the maximum extent practical.due to the component configuration. Credit for the one-sided only ultrasonic examination provided 75 percent coverage due to the requirement mandated in 10 CFR 50.55a(b) (2) (xv) (A) (2), which states, "Where examination from both sides is not possible on austenitic welds, full coverage credit from a single side may be claimed only after completing a successful single sided Appendix VIII demonstration using flaw on the opposite side of the weld." There is no Appendix VIII Program for cast austenitic piping welds. Therefore, only 75 percent coverage can be claimed for RECIRC System weld GR-3-63.
The performance of the ultrasonic examination of the subject areas to the maximum extent practical provides an acceptable level of quality and safety since the data obtained from the volume examined provides sufficient information to judge the overall integrity of the piping welds. The examination limitation does not affect the sizing of the previously recorded indication.
E1-2
Therefore, pursuant to 10 CFR 50.55a(g) (5) (iii), TVA requests that relief be granted for the BFN Unit 3, Third Ten-Year ISI inspection interval.
Uni t: Three (3)
System: Reactor Water Recirculation (RECIRC) System, System 068 Components: 1 (one) Full Penetration Piping to valve Weld (Austenitic Stainless Steel)
ASME Code Class: ASME Code Class 1 ASME Section XI Edition: 2001 Edition, as amended by 10 CFR 50.55a(b) (2) (xv) (A) (2) and 10 CFR 50.55a(b) (2) (xxiv)
ASME Code Table: Code Case N-577, N-577-2500, Table I Examination Cateqory: R-A, Risk-Informed Piping Examinations Examination Item Number: R1.16, Elements Subject to Intergranular Stress Corrosion Cracking (IGSCC)
ASME Code Requirement: Code Case N-577, N-577-2500, Table I, Examination Category R1.16, Requires Volumetric Examination of 100 percent of the Weld and Adjacent Base Material as depicted in Figure IWB-2500-8(c).
ASME Code Requirement From Which Relief Is Requested: Relief is requested from the Risk-Informed Inservice Inspection Program, Code Case N-577 requirement (Table I, N-577-2500)
Examination Category R-A, Item No. R1.16) to perform essentially 100 percent volumetric examination of the weld and adjacent base material.
List Of Items Associated With The Relief Request: RECIRC System, Weld GR-3-63, Valve to Pipe (28-inch NPS, Austenitic Stainless Steel)
EI-3
Basis for Relief: It is not possible to perform the volumetric ultrasonic examination from both sides of the weld due to the configuration of the component. Also, because of a recent requirement mandated by 10 CFR 50.55a(b) (2) (xv) (A) (2)which states, "Where examination from both sides is not possible on austenitic welds, full coverage credit from a single side may be claimed only after completing a successful single sided Appendix VIII demonstration using flaw on the opposite side of the weld." Presently, there is no Appendix VIII Program for cast austenitic piping welds; therefore, only 75 percent coverage can be claimed.
Under the previous ASME Section XI Code requirements [i.e., prior to rulemaking that added 10 CFR 50.55a(b) (2) (xv) (2)] UT coverage attained would have been 100 percent.
The examination limitations for Weld GR-3-63 were due the configuration of the component, valve to pipe. The performance of the ultrasonic examination of the subject areas to the maximum extent practical provides an acceptable level of quality and safety since the data obtained from the volume examined provides sufficient information to judge the overall integrity of the piping welds. A detailed description of the UT examination limitations are provided in Table 1.
Alternative Examination: None. In lieu of the Code required essentially 100 percent volume ultrasonic examination, TVA proposes an ultrasonic examination of accessible areas to the maximum extent practical given the component design configuration of the aforementioned valve to piping weld.
Justification For The Granting Of Relief: The weld was examined with the latest ultrasonic techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI) Program, in accordance with the requirements of the 2001 Edition, as amended by 10 CFR 50.55a(b) (2) (xv) (A) and 10 CFR 50.55a(b) (2) (xxiv), of ASME Section XI, Division 1, Appendix VIII as mandated by E1-4
10 CFR 50.55a(g) (4) and 10 CFR 50.55a(g) (6) (ii) (C).
An ultrasonic examination was performed on the piping weld of the accessible areas to the maximum extent practical given the component configuration. Credit for the one-sided only ultrasonic examination provided 75 percent coverage because of a requirement mandated in 10 CFR 50.55a(b) (2) (xv) (2), which states, "Where examination from both sides is not possible on austenitic welds, full coverage credit from a single side may be claimed only after completing a successful single sided Appendix VIII demonstration using flaw on the opposite side of the weld." Currently, there is no Appendix VIII Program for cast austenitic piping welds; therefore, only 75 percent coverage can be claimed. Under the original ASME Section XI Code requirements UT coverage attained would have been 100 percent.
The performance of the ultrasonic examination of the subject weld to the maximum extent practical provides an acceptable level of quality and safety because the information and data obtained from the volume examined is sufficient to judge the overall integrity of the piping welds. The examination limitation does not affect the sizing of the previously recorded indication.
Therefore, pursuant to 10 CFR 50.55a(g) (5) (iii), TVA requests that relief be granted for the Third Ten-Year ISI inspection interval.
Implementation Schedule: This request for relief is applicable to the BFN Unit 3, Third Ten-Year ISI inspection interval (November 19, 2005 to November 18, 2015). The weld listed in Table 1 was examined during the first period (Cycle 12, i.e., Spring 2006) of the Third Ten-Year ISI inspection interval.
Attachments:
Attachment A - 1 Drawing Drawing 3-ISI-0328-C, Sheet 2 E1-5
Attachment B Examination Data Report:
Weld Number GR-3 Report R-031 El-6
TABLE 1 WELD NUMBERS NPS ISI DRAWING PERCENT UNIT/CYCLE REMARKS COVE RAGE GR-3-63 28" 3-ISI-0328-C 75% 3/12 Limitations due to component (RECIRC System) configuration and the new requirements in 10 CFR 50.55a (b) (2) (xv) (A) (2), which requires UT of one-side of austenitic welds to be qualified to Appendix VIII Program to claim full ASME Code coverage.
At this time there is no Appendix VIII Program for single sided austenitic welds nor is one planned for the future. Also, the limitation prevented scanning in both axial directions.
Circumferential scans were performed from both sides of the weld centerline.
Therefore, only 75 percent coverage can be claimed.
E1-7
Attachment A One (1) Drawing Drawing 3-ISI-0328-C, Sheet 2
REFERENCE DRAWINGS:
TVA 47KI544-3 GE f53F754 KELLGOGBF 2-180 B - L OOP NoTE: THIS DRAWING SUPERSEDES 0 )
- NIB-SE RWR 3 002 COOD CNM-2139-C ALL SHEETS CR-J-59 GR-J-59-LS-- N mt3o [-. RWR --. MATERIAL SPECIF ICA TIONS, N2A -7 1--.JL KR-J-50-\ A7f6. Tp 304 4 X 0 .J7" NON WALL THK. (55)
KR-3-50-LS-2"I-
"P -%. *2;q' ~ , ----- 28" X I.t11" NOM. WALL TrIK.(55) SUCTION 28" X 1.122" NOM. WAIL THK. ISE) DISCHARGE CR-3-60 (O1)--,
- 1" N2A IR SAAOJWPIINr CR-J-50-LS' CR-3-61 RWR-3-O02-GOIJ-I RWR-3-002-O .. -o °o~.- / *?-, 12" X 0.602" MIN. WALL 22_ INTEGRAL RED. tEE O.398U MIN. WALL 28 X 22" CROSS 0.980" MIN. WALL 28, X 24" INEGRAL TEE X 1.272" MIN. WALL ASME CC-I (EQUIVALENT)
,Wft 001 RWR-3-00I2-GO16 RWR-J-O02-GO24
)WýR-4-002-C022 RWR-3 -00 2-COD-. RWR-3 002-CO17 "BENT INTEGRAL TEE W/12X22" RED. (2 TYP.)
K2. I - RWR-3-002-CD09 SEE DETAIL A DETAIL A - ONE PEICE SPECIAL FORCING RIWR-J-002-G023 RWR-I-OO2GD 28' K 22' CROSS SW-TER-J--2*1 "' S W/22" X 12" RED.
RN-3-002-G SEE DETAIL B
-GG2 0
'*':
RWVR-3-002.
KR-JI-S ff KR-J-26 R-I-il DIETAIL R - ONE PEICE SPECIAL fORCING KR-J-24-LS45 KR-I-Si-IS-I - -
- KR---24 KR-3-51-LS-2
- K GR--IA rRKR-I-2
- j RISK-INFORMEDWELOý F4"87 R327(L GR-I -286Bi R--9L-A"DCONTAMINA'IO LIN 2'11L-1-227L KR-R 4\ L CR-a-2 KR 52-4' K--21 CV6-1-S ='01I hIW I=,-,,,-I WOW I .,,. Ij-"'oc K -
R-i-5J L KR-3-52-LS-" CRIN (DL) TENS5-EE vALLcr AITHoRITr XR-N-N BROWNS FERRY NUCLEAR PLANT UNIT 3 L. WELDND. RECIRCULATrON SYSTEM K KELLOGGSPWLD WELD L OCA TIONS C = GE FIELD WELD S -- E UNIT NO DkA.1: p111 I$J}RALN.1 AEPASR'I* O=TA1L.Y WeldGR-3-6 SY'STEN
..... S.
ALL AJD HISTORY RESEARCHEDAT 1000 ROO 0AID ORAIN CCO 3-ISI-0328-C, Sheet 2
Attachment B Weld Examination Data Report:
Weld GR-3 Report R-031
r
/
0116 EXAMINATION
SUMMARY
REPORT NUMBER:
01!6 TENNESSEE VALLEY AND AUTHORITY RESOLUTION SHEET /v 3/
PROJECT: BFN UNIT: 3 CYCLE 12 COMPONENT ID: GR-3-63 EXAMINATION METHOD SYSTEM: RECIR ISI DWG NO: 3-ISI-0328-C-02 MT [ I PT El UT
- VT F CONFIGURATION: CATEGORI PROCEDURE: N-UT-6J REV ,q 1ý C. v I VLV TO P R-A I*XAMINER: EXAMINER- EXAMINER: EXAMINER:
LE1A LEVEL:'i LEVEL: LEVEL: LEVEL:
Total coverage calculated to be approximatel y 75" %
.e~4~caowima(e
'.'&S 0ST66Lkl> bU&~r or~~
F-:ieAMiAfMtAuIrA IA/.+S )CIlgJW dS t )1 Aij
.4 ZoýS"WR4 AID (00'6)U lA.1 11A.Agr IVAI-fe-71AA1 A-YIAL& J4A A rlWO IRAr 746AZ9 t2/kCov ~~)L4Y. _______________________________
1.5"V0"05 TPIAL VOLVA9 R)GVIR2i fQtZ 'r4 DWcohe 4 e UPS1RfAm 01-u x kwlJs'r -A1 0- -9 6xo C~~ft~iLL~CJLWe OY I cye4 eyg.o 9jel 71. __
/)
RESOTIBY: RE ANI..
............
.............
. ..
...........
.......... ..~i..... ....... "..
LEVEL___DATE:______/_ _LEVEL: _AT_: DIaTe: .3_OP" LEVEL _3:7- DATE: 3 /s/oý7 2 7 LEVEL:]2 iI DATE; -ýJA/t'6 Page: L-/ OF A0 ACCESS: FORMS DATABASE R-.0/04/01
'I 01117 DIGITAL ULTRASONIC TENNESSEE VALLEY CALIBRATION REPORT NUMBER:
AUTHORITY DATA SHEET PROJECT:! *, UNIT 3 CYCLE:12 CALIBRATION DATE: S/5-4cG PROC.: /IQ- (.0,/ REV: 8 TC: ,/jA CALIBRATION BLOCK NO.: WV8 S5 TEMP: 7d/ 'F INSTR. MFG: naT-notca DUE DATE: 81j SIMULATOR BLOCK NO:
MODELUTYPE: .* o M & TE NO.: . THERMOMTER S/N: 6'3o56 DUE DATE:QZ/c TRANSDUCER MFG: *'r") COUPLANTUL* 4 . BATCH: oy.2j>b SIN 89.- (- SIZE: 2M3/ FREQ: 2_ r MHz EXAM TYPE: SHEARI-] LONGLJ RLDO CABLE TYPE: *-i"4 LENGTH: (o inches ANGLE VERIFICATION
-- L- Ko BLOCK TYPE: ?MOA_5 I SIN: (02.* - 83 DAC NOMINAL ANGLE: 6 I ACTUAL ANGLE:
100 -INSTRUMENT SETTINGS
- 5 '__v
-- ;* A REFLECTOR REFERENCE MEMORY
- M SCANDIRECT. NTCH-I SDH SENSITIVITY NUMBER o "p AXIAL [] [] 75 dB3 G* *&3 z 60 L CIRC [] I D IN/4 dB ,H _
S -- -- -- I RANGE: 3 654(' *INST. FREQ.: 'g"Mhz 40 T PROBE DELAY: /_.2517[ *RECTIFY: glf"I.At/
U VELOCITY: ,22 DUAL ON OFF 20 D DISPLAY DELAY: * *REJECT: 0 %
E *ENERGY: "/&4 *DISPLAY START: /lV 0 *DAMPING:
- P)J OD: I T 'Ii. /CW1" DET: ONIOF TCG [-PEAKW FLANK j+ TCG: O 0 DISPLAY WIDTH: inches 3..6, REF. REFLECTOR:/'. w l*.GAIN: dB CALIBRATION TIMES AMPLITUDE: so/ METAL PATH: /, e6, INITIALTIME: " FINALTIME: i.!k/'
VERIFICATION TIMES 1l)9;t 12) 3) 4) 15) 6) 7 8) 9)
IxJJ 111 A-LA I-wr*
Uir~* ,LLU' UAIL~Lr iwr*. II-Ulab)IN I
~
I I- W1'r1i r *rL~ar MKUIVIIlN A
I ax.1
£'.A rx-rr¢'
" juNtja*.
VERIFY INSTRUMENT SETTINGS AND CALIBRATION SEQUENCE ARE IN ACCORDANCE WITH TABLE 2 OF TIlE APPLICABLE PDI QUALIFICATION IMPLEMENTATION PROCEDURE!
LINEARITY CHECK SIGNAL 1 100 90 80 70 60 50 40 30 20110 VERTICAL SIGNAL 2 50 3 5- 3
.3S 25 Zc: t5- lI GAIN SET -6 dB -12 dB SET +12 SET +6 ATTENUATOR A [P 32-48 16-24 20 64-96 40 64-96 COMMENTS: _4,.g7lvj/ -= .- , jL.' WELDS/ITEMS EXAMINED:
E AMINER: EXAMINER RVEER: ANII:22, 6241k ýf ~DATE: 3306 LEVEL:. LEVEL: LEVEL-. DATE: PG. OF 7- /0
0118 a
lmw w
I DIGITAL ULTRASONIC TENNESSEE VALLEY CALIBRATION REPORT NUMBER:
AUTHORITY DATA SHEET PROJECT: 1l:d UNIT 3 CYCLE: 12 CALIBRATION DATE: 4/6/c PROC.: /j'/ "- I REV: TC: AA CALIBRATION BLOCK NO.: 1&6 06e TEMP: 7/ 'F INSTR. MFG: ArlTgA4&_ DUE DATE: S/21ey SIMULATOR BLOCK NO: 4oOp,-
MODEIJTYPE: uJ, O M &TE NO.: , .- / THERMOMTER SN: bDUE DATE: 9/&/*&
TRANSDUCER MFG: K9A CoMP-?. V COUPLANTu LrxA&E* *" BATCH: p q 1.2-bb S/N 00rCy.g -'SIZE: .. .o,' /FREQ: 1.5 .Mliz EXAMTYPE: SHEARN LONGL RLE CABLE TYPE: ,, jr r. LENGTH: *' inches ANGLE VERIFICATION
____________________BLOCK TYPE: RO~IPAS S/N: (o2.4-83 DAC NOMINAL ANGLE: iq5 " ACTUAL ANGLE: ql, 100 - -INSTRUMENT SETTINGS
-. -' - A REFLECTOR REIERENCE MEMORY M SCAN DIRECT. NTCI SDH SENSITIVITY NUMBER 80 P AXIAL N 60 L c AI, I RANGE: 2.1sla" *INST. FREQ.: 2.26 Mhz o 40- T PROBE DELAY: &,. 22~5 *RECTFY:~ FULAM
-,- ROM P U VELOCITY: . 1.3 - DUAL[- OFF a
0 20 0
D E
DISPLAY DELAY:
- ENERGY:
- DAMPING.
Hl/C(l/ .#
os /
- REJECT:
- DISPLAY START: lp DET: r]PEAKH FLANK
," %
- PRF MODE: TCG: ON[] OFFg DISPLAY WIDTH: inches. 2"138
-REF. REFLECTOR: .- i_"*St Pop#A GAIN: dB 2,2 CALIBRATION TIMES AMPLITUDE: 2:5 oLV METALPATH: tp"/ INITIAL TIME: -730 FINAL TIME: /0-65 VERIFICATION TIMES 1)q 0 7r 2) 3) 4) 5) 6) 7) 8) 9)
PDI QUALIFIED INSTRUMENT SETTINGS:
VERIFY INSTRUMENT SETTINGS AND CALIBRATION SEQUENCE ARE IN ACCORDANCE WITH TABLE 2 OF THE APPLICABLE PDI QUALIFICATION IMPLEMENTATION PROCEDURE!
LINEARITY CHECK ISIGNALl1 1001 90 180 170 160 150 140 130 120 1 10 VERTICAL SIGNAL 2 50 1 125 I N E -6 dB -12dB SET +12 SET +6 ATTENUATOR AM 80 32-48 16-24 20 64-96 40 64-96 ".
COMMENTS: LQ W WELDS/ITEMS EXAMINED:
us 0-bek-PA- e~&~Ja-rto t. ____________
EXAMINER: EXAMIER:11 REVIEWER: NI
,421ZAJ YFAJ',5AI 0 LEVEL: sr 1ý;-/'A LEVEL: LEVEL DATE:
DATE:
PG.
,
OF 1217PG._ 3
0119 TENNESSEE VALLEY MANUAL ULTRASONIC REPORT NUMBER PIPING EXAMINATION is I AUTHORITY DATA SHEET Roli PROJECT: BFN UNIT/CYCLE 1 12 EXAMINATION DATE _ __51_
SYSTEM RECIR START TIME: 3 -'5. END TIME: 95'*
WELD I.D.: GR-3-63 E)ID INOD EXAM SURFACE CONFIG.: VLV TO P MATERIAL TYPE: []CS KSS []CSCL []CCSS FLOW SURFACE TEMP. 82- PYRO NO. 1-9(SoS PROCEDURE: N-UT-64 REV: o TC: r-1 EXAMINATION ANGLE 1 1/,5- DEG. &
'L DEG.
Wo
REFERENCE:
L'4gý b . AXIAL SCAN SENSITIVITY I q dB q I dB Lo
REFERENCE:
1"e crDc ~
C----NIIIT I ij dld
,m o, dB
- . _ ICC___
IND L(In) FROM REF. --AMP AT MAX AMP MAX NO.
EXAM NOM. NRI INDICATION INFORMATION:
NO. LI L Max L2 WMAX MPMAMAXMAX %DAC 3-14 ANG. TYPE, DAMPING, ETC.
b--h A/-- ,tq,- - - - - -o _
QA/ PTee,ou /,iC4T1.. 5 45 _____________
__Cew6,1 A.S~ (pt EJ(11 sge~ jjzMV pal 4
REMARKS/LIMITATIONS O 5NIb MA4 thuE.-T 'ro COAFl6t*-&4.Me.
r-oM4EPT, EXAMINER:.4aR !,Jsj* LEVEL: ANII:
ii 'XAMINER:
REVIEWED BY:
/,"
- LEVEL: ___ DATE:_____
DATE:
PAGEOF/
" e/o&
ACCFSS. FORMS DATABASE 10/18/01 I IIII II
0120 TVA 19668 (NP-5-89) 1-108-9"-44
/
0121 TENNESSEE VALLEY EXAMINATION
SUMMARY
C AUTHORITY AND RESOLUTION DATA SLHEET REPORT NUMBER:
)e03 PROJECT: BFN UNIT: 3 CYCLE: 12 COMPONENT ID: GR-3-63 EXAMINATION METHOD SYSTEM: Recirc ISI DWG. NO. 3-ISI-0328-C-02 MTT PT= UT [ VT [1 CODE CLASS: I CATEGORY: B PROCEDURE: N-UT- 4S REV'4 TC:NA COFIG.: VLV TO pipe N,47 7-EXAMINER:
WE~z-iW EXAMINER: EXAMINER:
- ,
LEVEL: . LEVEL: LEVEL: LEVEL:
This report contains the data generated from the through wall sizing ultrasonic examination of weld GR-3-63. This data suppliments the detection examination for the same component.
As required by IWB-2420(b) a successive examination of this component was performed, The dimensions of the IGSC crack have remained essentially unchanged (i.e., length and through wall dimensions). This exam satisfies the completion of sucessive examinations per IWB-2420(c). The succesive 6 exams and this exam documented the following dimensions:
Length Cycle 8 1.7" Cycle 9 1_7 Cycle 10 1.7" Cycle 12 1.7" Thru-wall .20" .20" .20" .20" The exam was performed using PDI qualified personnel, equipment and techniques required by PD1 Procedure PDI-UT-3, revision C and it's associated Tables. This procedure is implemented through TVA/ISO procedure N-UT-65, revision 4.
This exam satisfies the requirements of NUREG 0313 and BWRVIP-75.
LEVEL:2§DATE: ..
E~EL ZJ__AT:LEVEL:
606 EVEL:~~."
- DT DATE:
"'
'*- G PG.
. OF-DATE:
OF /0
0122 ULTRASONIC CALhBRATION NO.
TV SIZING Office of Nuclear Power DATA SHEET ROJECT: WELD NO:
UNIT: ... SYSTEM: 6-kc PROCEDURE NO: Abli"-LJ TRANSDUCER: _./4 P-457 CAL ULK. NO: b4.06 *S REVISION..O: *"Pc. ý/- SERIAL NUMBER,: 00 W/ IW_ CAL .LK. THKNS.- Z 0
..
REVISIONSIZE NO 15. TEL2..MP:7P RO O:1'4 INSTRUMENT: kAAJAb IEFRED __________Te6F1 MODEL/TYPE: CABLE TYPE/LENGTH: I?4/7%'/ , BATCH NO: O4iZ~sp I N ANaE ,E D IN A L 3 L O N GI TU NALO M NOMINAL ANGLE: TYPE SERIAL NO, I-**=**MEASURED ANGLEL ,4.+r EXAM:OF rlOT"ER EIA4MER 100 DA. , ][NSTRUMNT SETTINGS g-10 -i " REFLECTOR REFEECE MEMORY A go - 5,6 j A
P 70 0AXLAL dB I5JZZ-ZS-.S L 60 cmC LiI T. 40 FREQ: 2,2 Mz NS REJECT: 0 %
U, U 30- - -ANGLE: 44 deg DAMPING: / ohms O
E 20 -- DELAY: (,,Z3 msec -I.,
- A, 10I 2-D ZERO: C.0 P msec FILTER. C/,Kep
- 0 1 2 3 4 5 6 7 8 910 VELOC1TY:. 17/-5! msec REPRATE: AM04l'91414 SWEEPIDEPTH - RANGE: Z,'3 7 inches TOF: OEAK [I FLANK SCALE RANGE: 0-10. -. epq7 RECIFIER FLA- /E POWER ,'3Ar WFIELD SIMULATOR: "tiOMPA5 S/N: &OZr-&0 6- DUAL: []ON [Q OFF TCG: [DON ;OOFF REFLECTOR AlT INTITIAL VERIFICATION TIMES ICALIBRATION -7?ý6 AMPLITUDE t, FINAL METAL PATH b[/ CALIBRATION rTME /! * - Y "t, ! ,
L VERTICAL .4 K N SIGNAL I £00 90 80 70 60 SO 40 30 20 110 E SIGNAL 21 50 1 ,o I d° I IOI !0 R ATTENUATOR T SIGNAL 2 SHALL EQUAL 50% OF SIGNAL I :IS% OF FULL SCALE Y TESTER GAIN SET .6 .12 SET 412 SET +6 C SIGNAL AMP 10% 32 to 4 16d(.24 20% 64 to 96 40% 64 to 96 C A K DAILY LINEARITY CHECKS SATISFACTORY REFER TO CAL NO.-
TECHNIOUE: 0 SPOT RPATT I3 MOST D3RL 0 OTHER INDICATION L(In) FROM TOTAL THRUWALL SIDE OF TYPE OF ZERO REF. LENGTH DIMENSION WELD REFLECTOR NUMBER
/
- 3.4, /,7 _~ -_5;....b D /4- ..
DATE; b REVIEWED OV e ANIIi EXAMINER.,________
LEVEL * - DAT E:-- LEVEL: DATE: PAGE 7- '
TVA 19671 (ONP-6-88)
ULTRASONIC CAIMlON NO.
" Q3 " 'DVATA SIZING SHEET /0 Office of Nuclear Power I PROJECT:-. ,i WELD NO: 3
-t UNIT: 3 SYSTEM:___ __ __ __
PROCEDURE NO: l-r & TRANSDUCER:__ __________ CAL B-.. _ -M__.
SERIAL NUMBER; e)0Wqiz, iH 7AL _L m.S No:Z. '05 REVSIO_ No____________ýý___ 6 1- is'E~p a:_______
ReVIiAON NO: PCR SE:_' *....A.... OUPLANT:7.iXA
IN4STRUMENT: YegV7)6?'_4ste~*a _______
CAULE TYPEILENTH BATCH NO' MODELMTPE: L16AId 6~ 0 40, LPGZ..IA (
NOMINAL ANGLE: 60. - TP La GI4iUNL SRANoMEASURED AUGOLN* EXAM,: o"n 0A "INSTRUMENT SETTINGS
-0 REFLECTOR REFERENCE MEMORY A0 11 SCAN DIRC. NTC. I SDH ] SaENSlTI'TY UM 1 80---- ,rr I so Ad 1 A IN E 120 -MQ -5 -Mf -T -
DELAY:' 7, 7-
'k, 7*1,t HIS= * .e*- *,-,.,
10 ZERO: *,*,1ZP msec FILTER i AizF- *"
0 1 2 3 4 5 6 1789 910 VELOUTY Z./ý3. msec IREP RATE: v~1,ie,4M SWEEPIDEPTH RANE Z. o inhes TOF: NEN [- FLANK SCALE RANGE: 0-10.0 2 RECrFtE . A I POWER.6,,g97 0 FIELD SIMULATOR: H5.=5..
REFLECTOR MAXIMU r_ ___
,N
,JI
- DUAL: 0 ON 0 OFF INTITIAL CALIBRATION )7' TCG: E0 ON 0 OFF VERIFICATION TIMES TIME '-"'I MAM IMUM , ,~~INAL /
METAL PATH 99/, __-_/ 1A ___CALIBRATION / O,'L' L VERTICAL " TM E) ° ° Jo" I '° -
N SIGNAL I1 100 90 80 1 70 1 60 1 S5 40 1 36 1620 A 1SIGNAL 21 So I- I i Z I /q R ATTENUATOR I
T SIGNAL 1 SHALL EQUAL SO% OF SIGNAL I L*S% OF FULL SCALE Y TESTER GAIN SET - It - 12 SET +12 SET .6 C SIGNAL A1lP 80% 32 to 4 16 to 24 205 64 to%96 40% 64 to 96
, ,-ie z,*o/,'
C K DAILY LINEARITY CHECKS SATISFACTORY REFER TO CAL NO.
TECHNIQUE: [3 SPOT I&AT 3 MOST ORL 13 OTHER INDICATION L(In) FROM TOTAL THRUWALL SIDE OF TYPE OF NUMBER ZERO REF. LENGTH DIMENSION WELD REFLECTOR
/ ,. ,- -. g -..- * --. .:J /
4 REVIEWED flY:4.A .. iL I EXAMINIER: s-r---
DATAA ____ gaNl-_-88 LEVEL: -0121L CAE LEVEL: L14 DATE: 3 > PAGE TVA 19671 (ONP.6-88)
TVA PROJECT: E)5 -SYSTEM: RrC/Iec REPORT NO.:
Office of Nuclear Power Unit: WELD NO.:
MP /?I 3p0 1/ -- .
Jp A.t BY: 6"*"' 6'L/C4* LEVEL: DATE: cY6/1 PAGE 9 OF /0 TVA 19669 (ONP-6-88)
&
. No.
HEAT TAL HE I I I I I I I I
--&--
R-1 0 WB-8 MW 1*F UO H&.1408 .503 1.002 11.501 2.001 .04a8 .013 .0918 .013 .148 .013 I.198 .013 AS--BUILT HEAM. mi W 10 S . 5(0 -998 1.499 2.001 .045 .013 .096 .013 .145 1.013 f.9d .01.3 DIMENSIONS W,-64 HEAT OWJ. WI LOG m 348. ,504 1.004 1.503 2.003 .048 .013 .098 .013 .148 .013 .198 .013 Wa-aB 1 IEAT 0M3] S1. LOGNo. 34m4 .502 1.001 1.501 2.001 .047 .013 .09 0 .013 . 013 EDH NOTCHDEPrH II [I II lI I I I I i I I I ?.0000 DETAIL 'X' NOT TO SCMAL I I I I TYPICALA,4 NOTCHES I I I IO011fln Ian(lfl 2
DETAIL YX NOTES:
oQ
- 1. BREAK( SHARP EDGES AND RQIJOVE ALL BURRS. U'
( STEEL STAUP 10 No. AND HEAT Zia. ON SURFACE INOICATED IN CHARACTERS 3/1S Niln HEIGrHT.
6~<
S-TEL STAMP AS-OU1LT LOrK n1IMFUSION5y TO NEAREST .001" ON SURFACE INDICATED IN CIW(AC1LI(S 8/.LAINII(]CIIT. STINESE'EL #iEAT Na* 0Y031 I Al Y1uiL r Fr7R, wt-va VS-83A "M1ý i
~JJ Aht 04 &e Lis A" Tl.ýa
ENCLOSURE 2 TENNESSEE VALLEY AUTHORITY BROWNS FERRY NUCLEAR PLANT (BFN)
UNIT 3 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
SECTION XI, INSERVICE INSPECTION (ISI) PROGRAM (THIRD TEN-YEAR INSPECTION INTERVAL)
REQUEST FOR RELIEF 3-ISI-23 (SEE ATTACHED)
E2-1
TENNESSEE VALLEY AUTHORITY BROWNS FERRY NUCLEAR PLANT (BFN)
UNIT 3 AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
SECTION XI,INSERVICE INSPECTION (ISI) PROGRAM (THIRD) TEN-YEAR INSPECTION INTERVAL)
REQUEST FOR RELIEF 3-ISI-23 Executive Summary : This request for relief addresses nine (9)
Reactor Pressure Vessel (RPV) nozzle-to-vessel full penetration welds and seven (7) nozzle Inner Radius Sections. The design configuration of the RPV nozzle-to-vessel and inner-radius welds precludes a 100 percent ultrasonic (UT) examination of the required volume for the full penetration welds of the nozzles listed in Table 1. These examination limitations occur when the ASME Section XI, 2001 Edition, in accordance with 10 CFR 50.55a(b) (2)(xxiv) and, as amended by Sections 10 CFR 50.55a(b)(2)(xv)(B) through 10 CFR 50.55a(b) (2) (xv) (G), and 10 CFR 50.55a(b) (2)(xvi)(A), examination requirements are applied in areas of components constructed and fabricated to early plant designs. Based on a construction permit date prior to January 1, 1971, BFN is exempt from meeting certain provisions of the Code requirements for examination access, to the maximum extent practical, within the limitations of design, geometry, and materials of construction of the components in accordance with 10 CFR 50.55a (g) (4).
A UT examination was performed on accessible areas to the maximum extent practical given the physical limitations of the subject welds. The subject welds were examined with the latest ultrasonic techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI)
Program, as mandated by 10 CFR 50 55a(g) (4) and
.10 CFR 50.55a(g) (6) (ii) (C). The design configuration limits UT examination of the RPV nozzle-to-vessel weld coverage (percentage) to that shown in Table 1. TVA concludes that performance of an UT examination of essentially 100 percent of the RPV nozzle-to-vessel full penetration welds would be impractical. The E2-2
performance of the UT examination of the subject areas to the maximum extent practical provides an acceptable level of quality and safety since the data obtained from the volume examined provides sufficient information to judge the overall integrity of the welds.
Therefore, pursuant to 10 CFR 50.55a(g) (5) (iii), TVA requests that relief be granted for the BFN Unit 3, Third Ten-Year ISI inspection interval.
The 2001 Edition, in accordance with 10 CFR 50.55a(b) (2)(xxiv) and, as amended by Sections 10 CFR 50.55a(b)(2)(xv)(B) through 10 CFR 50.55a(b) (2) (xv) (G), and 10 CFR 50.55a(b) (2)(xvi)(A), ASME Section XI, Table IWB-2500-1, Examination Category B-D, Item No.
B3.100, requires a volumetric examination of the reactor pressure vessel nozzle inner radius section.
In accordance with ASME Code Case N-648-1, TVA performed an enhanced Visual (VT-I) examination, capable of a 1-mil resolution, in accordance with ASME Section XI, VT-I requirements for the following nozzle inner radius sections; NIA, N2B, N2D, N2F, N3B, N5A, and N8A.
Unit: Three (3)
System: Reactor Pressure Vessel (RPV), System 329 Components: Nine (9) RPV Nozzles full penetration welds and seven (7) Inner Radius Sections as listed in Table 1 ASME Code Class: ASME Code Class 1 (Equivalent)
ASME Section XI Edition: 2001 Edition, in accordance with 10 CFR 50.55a(b) (2)(xxiv) and, as amended by Sections 10 CFR 50.55a(b)(2)(xv)(B) through 10 CFR 50.55a(b) (2)(xv) (G), and 10 CFR 50.55a(b) (2)(xvi)(A), by following the Electric Power Research Institute's (EPRI) Performance Demonstration Initiative (PDI) processes.
ASME Code Table: IWB-2500-1 Examination Category: B-D, Full Penetration Welds of Nozzles in Vessels E2-3
Examination Item Number: B3.90, Reactor Vessel Nozzle-to-Vessel Welds B3.100, Reactor Vessel Nozzle Inside Radius Section ASME Code Requirement: ASME Section XI, Table IWB-2500-1, Examination Category B-D, Item No. B3.90 requires a volumetric examination of essentially 100 percent of the weld and adjacent base material as depicted in Figure IWB-2500-7(a).
ASME Section XI, Table IWB-2500-1, Examination Category B-D, Item No. B3.100 requires a volumetric examination of essentially 100 percent of the nozzle inner radius area as depicted in Figure IWB-2500-7(a).
Reference ASME Code Case N-648-1, Alternate Requirement For Inner Radius Examinations of Class 1 Reactor Vessel NozzlesSection XI, Division 1.
ASME Code Requirements From Which Relief Is Requested: Relief is requested from the requirements of ASME Section XI Code, Table IWB-2500-1, Examination Category B-D, Item No. B3.90 to perform essentially 100 percent volumetric examination of weld and adjacent base material and Item No. B3.100 to perform essentially 100 percent volumetric examination of the nozzle inner radius section.
List Of Items Associated With The Relief Request: NIA RPV Nozzle-to-Vessel Weld NIA RPV Inner Radius Section N2B RPV Nozzle-to-Vessel Weld N2B RPV Inner Radius Section N2D RPV Nozzle-to-Vessel Weld N2D RPV Inner Radius Section N2F RPV Vessel-to-Nozzle Weld N2F RPV Inner Radius Section N3B RPV Nozzle-to-Vessel Weld N3B RPV Inner Radius Section N4B RPV Nozzle-to-Vessel Weld N4C RPV Nozzle-to-Vessel Weld N5A RPV Nozzle-to-Vessel Weld N5A RPV Inner Radius Section N8A RPV Nozzle-to-Vessel Weld N8A RPV Inner Radius Section E2-4
Basis For Relief: The design configuration of the RPV nozzle-to-vessel welds precludes a UT examination of essentially 100 percent of the required volume. The component design configuration limits UT examination coverage of the welds to the percentages shown in Table 1.
Visual examination of the inner radius section for the above nozzles is limited because the reactor internal piping configuration prevents placement of the camera in all positions necessary to examine the surface M-N [See Figures TWB-2500-7(a) through (d)] over the full circumference. This prevents the examination from obtaining essentially 100 percent coverage.
A detailed description of the examination limitations is provided below:
" N1 nozzles (2), RECIRC Outlet and N3 nozzles (4), Main Steam Outlet There are no thermal sleeves or piping inside the nozzles, they are of sufficient size to perform visual examination on the majority of the nozzle bore region. However, to achieve enhanced visual examination criteria the underwater camera would need to be placed inside the nozzle opening and using conventional underwater camera and fixtures, it is not possible to maintain required camera angle to fully examine the inner most portion of the nozzle bore. Therefore, for the examination of the recirculation outlets (N1 nozzles) and the main steam (N3 nozzles),
less than 100 percent examination volume was achieved. The estimated examination coverage for these nozzles was 90 percent of the required volume.
" N2 nozzles (10), RECIRC Inlet Thermal Sleeve and Jet Pump Riser Piping The inaccessible area is the inside bend radius of elbow at approximate clock positions 11:00 to 1:00, and at the bottom outside diameter bend of the elbow at approximate clock positions 5:00 to 7:00. The limitations are due to the proximity of the of the jet pump risers.
E2-5
0 N5A and N5B, Core Spray Nozzles Core spray thermal sleeve and tee box and feed water sparger. Feedwater spargers are located above the core spray nozzle and the configuration of the core spray thermal sleeve and tee box prohibits placement of the camera 360 degrees around the nozzle.
The limitations are at the top position at approximate clock positions 10:00 to 2:00, and the bottom position at approximate clock positions 4:00 to 8:00.
- NBA and N8B nozzles, RECIRC Instrumentation Twelve instrumentation lines pass through the vessel wall into the vessel. The core shroud support plate is located directly beneath the nozzle preventing placement of the camera from approximate clock positions 4:00 to 8:00.
Alternative Examination: In lieu of the Code requirement for essentially 100 percent volume UT examination on the nozzle to vessel weld, TVA proposes a UT examination of accessible areas to the maximum extent practical given the component design and configuration of the RPV nozzle-to-vessel welds.
For the RPV inner radius section in accordance with Code Case N-648-1, in lieu of a UT examination, a visual examination with enhanced magnification that has a resolution sensitivity to detect a 1-mil width wire or crack, utilizing the allowable flaw length criteria of Table IWB-3512-1 with limiting assumptions on the flaw aspect ratio was performed.
The provisions of the 2001 Edition, in accordance with 10 CFR 50.55a(b)(2)(xxiv) and, as amended by Sections 10 CFR 50.55a(b) (2)(xv)(B) through 10 CFR 50.55a(b) (2)(xv)(G), and 10 CFR 50.55a(b) (2)(xvi)(A), of Table IWB-2500-1, Examination Category B-D, continue to apply except that, in place of examination volumes, the surfaces to be examined are the external surfaces shown in the figures applicable to this table.
E2-6
The estimated enhanced remote visual (VT-i) examination coverage achieved for each nozzle is provided in Table 1.
Justification for The Granting of Relief: (1) The design configuration of the subject nozzle-to-vessel welds precludes UT examination of essentially 100 percent of the required examination volume. Access to the nozzle-to-vessel welds is by a series of doorways in the concrete biological shield wall. Insulation behind these doorways is designed for removal around the nozzle circumference. In order to examine the welds in accordance with the Code requirements the RPV would require extensive design modifications. The physical arrangements of the nozzle-to-vessel welds preclude UT examination from the nozzle side.
The limitations are inherent to the barrel-type nozzle-to-vessel weld design and are compounded by the close proximity of the biological shield wall.
Scanning from the nozzle surface is ineffective due to the weld location and the asymmetrical inside surface where the nozzle and vessel converge. Coverage was increased by scanning from the outside blend radius of the welds where practical. Experience from the automated UT examinations performed at other BWRs from the inside surface has shown that the nozzle-to-vessel weld coverage would not be greatly improved even if performed from the inside surface utilizing the current state-of-the-art techniques.
The configuration of the nozzle-to-vessel welds precludes UT examination from the nozzle side due to the weld location and the asymmetrical inside surface where the nozzle and vessel converge. The extent of examination coverage from the vessel side provides reasonable assurance that no flaws oriented parallel to the weld are present. The areas receiving little or no examination coverage are located toward the outside surface of the reactor vessel in the general area of the nozzle outside blend radius.
E2-7
The blend radius restricts the scanning movement and/or transducer contact. The reactor vessel inner-half of the thickness and inside surface are interrogated with the UT beam. Degradation located at the inside surface or inner-half of the vessel would be located.
The subject welds were examined with the latest ultrasonic techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI)
Program, in accordance with the requirements of the 2001 Edition, in accordance with 10 CFR 50.55a(b) (2)(xxiv) and, as amended by Sections 10 CFR 50.55a(b)(2)(xv)(B) through 10 CFR 50.55a(b) (2)(xv)(G), and 10 CFR 50.55a(b) (2)(xvi)(A), by following the Electric Power Research Institute's (EPRI) Performance Demonstration Initiative (PDI) processes.
(2) Radiographic examination as an alternate volumetric examination method was determined to be impractical due the radiological concerns.
Gaining access to the inside surface of the RPV to place radiographic film would require extensive personnel protection due to high radiation and contamination levels. Also, due to the varying thickness at the outside blend radius of the weld several radiographs may be required of one area to obtain the required coverage and/or film density. The additional Code coverage gained by radiography is impractical when weighed against the radiological concerns.
Therefore, TVA concludes that performing an UT examination of essentially 100 percent of the nozzle-to-vessel full penetration welds and a 100 percent enhanced remote Visual VT-i with 1-mil wire resolution on the inner radius section, would be impractical. Further, it would also be impractical to perform other volumetric examinations (i.e., radiography) which may increase examination coverage. A maximum extent practical UT examination of the subject areas provides an acceptable level of quality and safety. TVA concludes that significant degradation, if present, would be detected during an UT examination performed to the maximum extent practical of the subject welds. As a result, reasonable assurance of operational readiness of the subject welds has been provided.
E2-8
Accordingly, pursuant to 10 CFR 50.55a(g) (5) (iii), TVA requests that relief be granted for the BFN Unit 3, Third Ten-Year ISI inspection interval.
Implementation Schedule: This request for relief is applicable to the BFN Unit 3, Third Ten-Year ISI inspection interval (November 19, 2005 to November 18, 2015). The nozzle-to-vessel welds listed in Table 1 were examined in the first period (Cycle 12, i.e., Spring 2006) of the Third Ten-Year inspection interval.
Request for Relief 3-ISI-23 is consistent with BFN Unit 3 Second Ten-Year inspection interval requests for relief 3-ISI-7, Revision 0, 3-ISI-14, and 3-ISI-15 submitted by TVA letters dated March 26, 1999, and May 9, 2003 respectively. NRC approved these requests by letters dated August 2, 1999, and February 11, 2004.
References:
TVAN Nondestructive Examination Procedure N-GP-31, "Calculation Of ASME Code Coverage For Section XI, Appendix VIII Ultrasonic Examinations."
Attachments:
Attachment A - 4 sketches Sketch SK-B3001, Reactor Pressure Vessel Assembly Sketch SK-B3017, N1 RECIRC Nozzles Sketch SK-B3018, N2 RECIRC Inlet, N3 Main Steam, N4 Feedwater and N5 Core Spray Nozzles Sketch SK-B3019, Jet-Pump Nozzles N8 Attachment B Examination Data Reports:
NlA-NV - REPORT R-079 NlA-IR - REPORT R-057 N2B-NV - REPORT R-080 N2B-IR - REPORT R-057 N2D-NV - REPORT R-081 N2D-IR - REPORT R-057 N2F-NV - REPORT R-082 N2F-IR - REPORT R-057 E2-9
N3B-NV - REPORT R-083 N3B-IR - REPORT R-057 N4B-NV - REPORT R-085 N4C-NV - REPORT R-087 N5A-NV - REPORT R-088 N5A-IR - REPORT R-057 N8A-NV - REPORT R-089 N8A-IR - REPORT R-057 E2-10
TABLE 1 WELD NUMBERS NPS Cvcle ISI DRAWING PERCENT Remnarks WELD NUMBERS ISI DRAWING PERCENT Remarks NIA-N/V (Recirc Outlet) 28" 12 3-ISI-0328-C 22% No transverse scans were performed from the nozzle side NIA-IR (Recirc Outlet) 28" 12 3-ISI-0328-C 90%
N2B-N/V (Recirc Inlet) 12" 12 3-ISI-0328-C 42% No transverse scans were performed from the nozzle side N2B-IR (Recirc Inlet) 12" 12 3-ISI-0328-C 40%
N2D-N/V (Recirc Inlet) 12" 12 3-ISI-0328-C 42% No transverse scans were performed from the nozzle side N2D-IR (Recirc Inlet) 12" 12 3-ISI-0328-C 40%
N2F-N/V (Recirc Inlet) 12" 12 3-ISI-0328-C 42% No transverse scans were performed from the nozzle side N2F-IR (Recirc Inlet) 12" 12 3-ISI-0328-C 40%
N3B-N/V (Main Steam) 26" 12 3-ISI-0329-C 36% No transverse scans were performed from the nozzle side E2-11
WELD NUMBERS NPS ISI DRAWING PERCENT Remarks WELD NUMBERS NPS Cm~
Cycle 151 DRAWING PERCENT Remarks N3B IR (Main Steam) 26" 12 3-ISI-0329-C 90%
N4B-N/V (Feedwater) 121" 12 3-ISI-0327-C 39% No transverse scans were performed from the nozzle side N4C-N/V (Feedwater) 12" 12 3-ISI-0327-C 39% No transverse scans were performed from the nozzle side N5A-N/V (Core Spray) 10" 12 3-ISI-0220-C 38% No transverse scans were performed from the nozzle side N5A-IR (Core Spray) 10" 12 3-ISI-0220-C 40%
N8A-N/V (Recirc Inst.) 4" 12 3-ISI-0411-C 64% No transverse scans were performed from the nozzle side 4" 12 N8A-IR (Recirc Inst.) 3-ISI-0411-C 40%
E2-12
Attachment A Four (4) Sketches Sketch SK-B3001, Reactor Pressure Vessel Assembly Sketch SK-B3017, N1 Recirculation Nozzles Sketch SK-B3018, N2 Recirculation Inlet, N3 Main Steam, N4 Feedwater, and N5 Core Spray Nozzles Sketch SK-B3019, N8 RECIRC Instrumentation Nozzle
....... .... .
..... N7TOP HEAO VENT NOZZLE Z . . . . . . .
-TOP NA I.4 LFNGLUG~ . . ......
AO.
0 riO I1 ST
.. . . ANGE.
REFýLJELSUJPPORT .. .. . IE LS
/ *i~ . .ii .**..*
.*iii
.
.**
.. .....
..
... i.. :
.. ::.
NOZZLE . .. ....
SHE LL URSE 5
""12 " N3B*= S -E NST9.MENTATION OUT IBRM ET * "ý " ' '" " ""L.k G' """ ... '" SEC5s )
U1OZZLE
- . . . .... . .. . . ..... . ... : ... ... I? . .. . . .... . . . . ..
SHELL '
STABE : I zER R.".. RACK . T ".. .. .COURSE' NOZZLE. .. " .. .. ... ... ..
. . . OZZLE ~~~~
..:.... ... .. . .. . .. . .. . . . . . .. .. .....: , : ::
/ ::*. : * : : .. : . ~~~..... .. . . .. 5.. - . 5... . . *. ,"SHELL' ...
.. COURSE 3
,.,
M. ~
IJECR0 NED AETURII NOZZLE
'. S.ESTEM A rO... -l'NT:mN :',e . ;'Lc'E~ -' .N ; ..... ::::.'.
31
. .O. *. ': NS: .CqOR
" .
.. " ..
'..E. PRA 1ý:
NOZZLE...
. .. ... . . . . ..- * .
JI 502 :.
': P..J*
,.,e :: .. ... - . .. .. . .. . . .:. . .. . . . . ....
N:EINSTRUMENTIATION' LE EO EIl 1,2 RECIRC .B LL N E rNl. ..
INLET 258. .5 imEm
.; . *zs~l
- i*2*o .. . . . ... i i , , , . .
OUTLET ,GZZ E .'s.**EA O i
.COURSE.I.
OZeP.P LE 12
.5ý
-0I L IOUIO.POISON ........ JLO.Ep CO rTROL Ni-iOZLE . . . . . . .
A IN NOZZZ. .
. .. 0*11 RO.NiERRI.F.
SEFEREN-E 89W DOAAUING .iQ Z5.46r-8:
- I ETcH RELEASERECORD.. . .
.E DAE PREPARED REViEWEI) kl :uAPPROVED N PROE H ~~ ~ ~
R:~ PE .t'A ~ ~
E...TIR... . . . ...
...... . ...... ...
.......
. .. . . . . . . .
.. . ....
FO A 2'ZL SHlSINGD AND~ N.
N A F.GN .TTO
.SA .. ........
~~
HUFF ~
SFO S RORMUE NYA ~ TIT ALC~ ~ VVUDIN I.... . .... ..... . .U .. .. ......
~~ ~
O ARCTO/ISALTO SHALL ~ ~ O~ 36 18BONS KOIEUE 3 .ER ....
TA:~c~UA~IoIKF OZ. ii S(BB
. . ... .. . ......
SIHELLCOURS*
w (A
0)
H-OD
- T BL A . . . . .
NOZEOSCETO M5 a NZZLE )ID SEL NO.NOZL I NozzLE OCSCRIPTISN ME j i. n. COURsEI CMMENTS N
12 RECIRCULATION INLET ME 607: 11 56' $CL
" " M" 614 . . ."23 .75 ' " SC5 . . . .. . .
'N3 SIEAM OUTLET
. ... -
N4 i N5 .
111111111111*111111ZII11 FEOUATER INLET "
CORE SPRAY . .. . . .. '.
" -
MKT9I .
i ,.76
.7 .'
8.1... .
.i ..
. .. "C3 Sc3 ..-
CLADDING I.-
REMOVED
.I.I.I.Z.Z.I . .
BY PLANI MODIFICATION
! .
.. i~i~ ~i...' i i .i iii. .ii~i~i .. i ii i..ii~i~i .i. .~ i. ". .
"..'i i ....i . ii ... i ~
.i.i.J~l .
REFERENCE BRDRAWING NO.I31639E- 4 (DETAIL ýi ... .. ....
. . AND NO E5106P- .
. I law ~O .
USE ONLY &NO CC I I* I.TI.~. I*.*I II
- NOTE. TISTOSKETI IýiT FO.D.R.IS
$~ALI.
5H
.I. PAW .AAM Hl7 NP USED FOA FABRICAT.ION)ISA N
<.
I4B5305 AlN BROWS FER FSLO E01011ý. 10.414. 8 11NIUZZLES IS1<-83018 I ; I I I I
.............
i*
az 00 Cn w
wA 0
H to0 3/16 CLASDING I NOMNIAL 1/8"IN.. * ** *
...... .. ................. AI
- ....... SHALLNOW.TE. USEDFOR TABAICATION/INSTAILAON IA"0075N POW.W.. ý PUNS ac, FERRY 31.ý ýE I I I I I IL
- II l lI . I .......
. . .. .1~~~~. BRO NS..R........3B1
Attachment B Weld Examination Data Reports:
NIA-NV - Report R-079 NIA-IR - Report R-057 N2B-NV - Report R-080 N2B-IR - Report R-057 N2D-NV - Report R-081 N2D-IR - Report R-057 N2F-NV - Report R-082 N2F-IR - Report R-057 N3B-NV - Report R-083 N3B-IR - Report R-057 N4B-NV - Report R-085 N4C-NV - Report R-087 N5A-NV - Report R-088 N5A-IR - Report R-057 NBA-NV - Report R-089 N8A-IR - Report R-057
Weld Examination Report R-079 N1A-N/V RECIRC Outlet Nozzle
ME C * ,;~i~'si
-% ~
.45V R-077 lAREVA A EXAMINATION
SUMMARY
I I~
Summary No.: U3C1 2-N1IA.NV Examination Data Sheet : NIA-DS01, NIA-DS02 Exam Date: 3110/2006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: Recirculatlon Outlet/NlA-NV Examination Procedures: 54-1S1-850-03' N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Section 2 Calibration Sheets No(s):
NIA-CS01 NIA-CS04 Examination Category: B-D NIA-CS02 NIA-CS05 NIA-CS03 ISO I Drawing: N113-ISI-0328-C Examination Z No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: L] Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-O0
- SDCN: 30-9015396-00 5 Geometric Summary: 7-/A, e 4%c,' w6.6i4 99373 t 9968/, /f.f"k&C WOC Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C12.
In accordance with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel C .surface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
In accordance with UT Procedure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Recirculation Inlet (N2) Nozzle Modeling Parameters Probe Probe Skew Scan Surface 60 Shear +/-(60 to 78) Vessel 430 Shear +/-106 Blend 21% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K) was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 25.76% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a 1/" on each side.
This examination satisfies the requirements of ASME Sec. XI (2001 Edition with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec Xi, Appendix VIII qualified personnel, procedures, and equipment as amended by the Final Rule.
Prepared By: George Chapman LVII Date: 3/1012006 Reviewed sy.4~m A. Date:3/27!2006
ýýgn: 0"fQ44.x '-*l*'I Sign: - /A j ",* " .
- V a
Customer: Felh ,lS. PI.4/f096 Date-AMI Review: &al Sion.
,.-* , , f J Section 5 Tab ~ PageAm/n S 1 of 10 51-901 5478-can 51-9015478-000 Section 5 Tab 6* Page lof 10
Exam Date /Time: 3/10/06 20:30 Examination Data Sheet No.:N1A-DS02 ARE VA A UT EXAMINATION DATA SHEET AREVAN1A-CS05 Iso IDrawIng: N1/3-ISI-0328-C Calibration Sheet: N1A-CS03.N1A-CS04 Wo: Nozzle BossTo Blend Radius Exam Angle: 43°S, 60'S Customer: Browns Ferry Unit 3 Systemr/ Component I.D.: RPV Nozzle N1A Lo: TDC Procedure No.: 54-1SI-850-03 Component
Description:
28" Recirculation Outlet Nozzle to Vessel Weld Exam Surface: OD Inner 15%
= Counter Clockwise RBR = Remaining Back Reflection u CCW = Clockwise US = Up Stream CW = Depth TWO = Through Wall Dimension w w maXw D = Downstream Wmax = Dist From CL at Max Amplitude IW DS = Half Max Amplitude W1 = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude ral W2 = Dist From CL at Specified % of .
Li 2 = End Point 1&2 (Late Dac (Backward)
Movement)
MAXIMUM AMPLITUDE TWD or WIDTH Dimensions i
ND US DS FLngth L Max W2 D2 L1 D1 L2T D2 Comments D
- 7WICC A. D W Max W11 D1 NO RECORDABLE INDICATIONS C.,
C'-.
Notes:
I.--..
- 1. Search unit orientations: Tangential K1
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Tommy Brown Level: 11 Date: 3/10/06 Examiner: N/A Level: Date: Reviewe: Adam Conti Level: III Date:3/27/06 ANII Revie K. No Date:
51-9015478-000 Section 5 Tab B Page 2 of 10
Exam Date /Time: 03110/2006 17:30 Examination Dala Sheet No.:N1A-DS01 A UT EXAMINATION DATA SHEET Iso /Drawing: N1/3-ISI-0328-C. Calibration Sheet: N1A-CS01, N1A-CS02 AREVA Wo. Nozzle Bass To Blend Radius Exam Angle: 6ORL Customer: Browns Ferry Unit 3 System / Component I.D.: RPV Nozzle NIA Lo: TDC Procedure No.: N-UT-78-03 Component Descdption: 28" Recirculation Outlet Nozzle to Vessel Weld Exam Surface: 00 Zone 1 2
= Counter Clockwise RBR = Remaining Back Reflection U CCW = Clockwise US = Up Stream oCW = Depth TWO = Through Wall Dimension Q- w Owpt D = Downstream Wmax Dist From CL at Max Amplitude / I DS = Half Max Amplitude WI = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude W=DstFmCLaSpc
= End Point 1&2 (Lateral W2 = Dist FromckCL at Specified fedf
%
Li - L2 Mvmn)Dac (Back-ward) I, Movement)
SUS IDS MAXIMUM AMPLITUDE TWD or WIDTH Length Dimensions OCWCCW DAC W I D1 W2 D2 L1 1D12 D2 NO RECORDABLE INDICATIONS None Notes:
- 1. Search unit orientation: radial and circumferential. Circumferential scans performed with 10* tangential skew.
limitations and ASME Code coverage
- 2. Examination 5'-.147-.0 , e.io Limitation is provided on the Ultrasonic Examination abBigand Coverage Worksheets. 3o.i*
Examiner: George G.Chapmian Level: 11 Date: 03/10106 [Examiner NIA Level: Date: Reiew t.Adam A. Conti Level: IIl Date:03/27/06 ANII Reviw J"-/~4/ 6/6/06 51-9015478-000 Date:
_________I________ Section 5 Tab B Page 3 of 10
A RPV Nozzle-To-Shell Weld AR E VA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA [Plant: BFN3 Unit: 3 Weld ID: N1A Date: 03/27/06 Summary M: U3C12-N1A-NV Axial scans are performed with a procedure for the examination of vessel shell welds. This procedure has been demonstratedfor detection of flaws located throughout the entire weld thickness.
Coverage obtained during axial scans is typically limited due to nozzle configuration.
In the circumferentialscan direction the outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in the circumferentialscan direction a second examination is performed with a proceduredemonstrated for nozzle inside-radius UT. This procedure has been demonstratedfor detection of flaws in the inner 15%-4 only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanning is performed with several search units from the nozzle blend.
can '"iOJ "-C4r0umferen,-Scas ." "
gInnr.15%-it. uf5~
Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 61.9512 inches Dlnner 15%-t Examination Volume: 5.59212inches. DOuter85%-t Examination Volume: 56.359347inches.
68°RL axial scan limited: 29Yes []No kCoverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: NYes [INo Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: []Yes ZNo Description of Limitation: Nozzle Blend Radius
- Total Axial Volume Achieved: 20.1105" inches Description of Limitation: NIA "Outer 85-4% Volume Achieved: 0.84152 inches 2
'lnner 15%-t Volume Achieved: 5.5921l inches. C:,ý CPercentage of Axial Coverage: 32% J Total Circumferential Examination Coverage: 10% -
B+AXIOO= C (F+H)+A=J
.. *.-.
.Combined Axial and Circumferential.Weld. Cove ...
LTotal Examination Coverage: 21%'/
(C+J)÷2=L Prepared by: Bret Flesner Date: 03127/06 CRnd Date:03/27/06 I Review: Date:
R~~~ 7~~iyl CdmDt:0l70 51-9015478-000 Section 5 Tab B Page 4 of 10
0 0S A RPV Nozzle-To-Shell Weld AREVA Ultrasonic Examination Limitation and Coverage Worksheet Utility: VA Plant: BFN3 Unit: 3 Weld ID: NiA Date: 03/27106 Summary W: U3C12-N1A-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with +/- 10* skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 21% coverage.
i0 C)ý Ni Nozzlea.- Shell I--F."
-Tangential (Circumfaetenbal) Scan -Z
-Radal (Axial) Scan Prepared by: Bret Flesner Date: 03/27/06 R vewl~
7 y Adam Conti Date:03/27/06 ANII Review: Date:
I 51-9015478-000 Section 5 Tab B Page 5 of 10
___________________
tiO7t f A UT CALIBRATION DATA SHEET AREVA ma d
W Customer: Browns Ferry Unit 3 Exam Date: 03/10/2006 Calibration No.: NIA-CS01 System I Component I.D.: RPV Nozzle NIA Component
Description:
28" Recirculation Outlet Nozzle to Vessel Weld (Zone-1 Examination)
ISO I Drawing No.: 3-ISI-0328-C Procedure No. I Rev.: N-UT-7813 Material: Clad CS Diameter: 28" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) /4A Thickness (in), 6.12" Diameter. (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 81* Temp (F) Comp.: 78° Delay: 14.000 pS Range: 8.0 Config.: Dual Mode: Long. Thermometer No.: VH-9571 Each Major Screen Div. #: 0.8 Nominal Angle: 60" Measured: 61" Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174 125' Serial No.: NA Damping: 1 K Freq (MHz): 2-25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amp: Fixed Pulsar: High......... Sweep Position NA NIA Reference Sensitivity: 59.0 dB 100 - - FIT..T - Signal Amp (%) NA NIA Scan Sensitivity: 75.0 dB 9 Gain DB (dB): NA N/A 80 70 Probe Squint Angle 3" Probe Focus: FD -2.70" CALIBRATION CHECK so Date/Time OK Initials 40 -
Initial Cal: 3110106 1700 X 30 Init, Sirm. Cal: NIA NIA 20 Intermediate: NIA N/A 10 Intermediate; NIA N/A 0 00 DEGREE WELD THICKNESS ONLY Intermediate: N/A N/A 1 2 3 4 5 7 8 9 Component: NA Intermediate: N/A N/A BM: NIA HAZ: NIA Intermediate: N/A NIA Circ Scan Exam Angle is =< the inverse sine of C/L Weld: NIA Final Cal: 3/10/06 1845 X v the Nominal IDOD Component: N/A Beam Direction on Calibration Block 0 Deg. Axial Circ BM: NIA HAZ; N/A (Yes I No) NO YES NO Crown HT: N/A Weld Width: NIA Reflector 114T SOH Sweep Position I Depth in Inches 3.6 Amplitude in % 80%
Gain In dB 59.0 dB Notes; Ihe 600 Zone-1 ultrasonic examination.
I 51-9015478-000 Section 5 Tab B Page 6 of 10 V1,
"I
,e-L979 A UT CALIBRATION DATA SHEET AREVA
=41. 4 U PCustomer: Browns Ferry Unit 3 Exam Date: 03/1012006 i Calibration No.: NIA-CS02 System I Component WII.D.: RPV Nozzle N1A I Component
Description:
28" Recirculation Outlet Nozzle to Vessel Weld (Zone-2 Examination)
ISO I Drawing No.: 3-ISI-0328-C Procedure No. / Rev.: N-UT-78/ 3 Material: Clad CS Diameter: 28" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) 1/,A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 81
- Temp (F) Comp: 78' Delay: 14.000 pS I Range: 20.0 Config.: Dual Mode: Long. Thermometer No.: VII- 9571 Each Major Screen Div. #: 2.0 Nominal Angle: 60* Measured: 61t Couplant: Ultragel II Batch No. 05325 Cal in Depth or Sound Path: Sound Path Fixture / Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174125' Serial No.: NA Damping: 1 K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors N/A NA PulseAmp: Fixed I Pulsar: High Sweep Position N/A NIA Reference Sensitivity: 72.0 dB 100 Signal Amp (%) N/A N/A Scan Sensitivity: 80.0 dB 90 Gain DB (dB): N/A N/A 80-70 . - Probe Squint Angle 30 60 - Probe Focus: FD -2.70" CALIBRATION CHECK Date/Time OK Initials 40 Initial Cal: 3/10106 1655 X 30 Init. Sim. Cal: N/A N/A 20I Intermediate: NIA NIA 0..
Intermediate: NIA N/A 0 ' " 0 DEGREE WELD THICKNESS ONLY Intermediate: N/A N/A 0 1 2 3 4 5 6 7 8 9 10: Component: N/A
...... Componnt:NN/A Intermediate: N/A N/A BM: N/A HAl: NIA Intermediate: N/A N/A Circ Scan Exam Angle Is = the Inverse sine of C/L Weld: N/A F C1* the Nominal IDIOD ratio?
Final Cal: 3/10061850 X [1 YES El NO 0 N/A Component: NIA Beam Direction on Calibration Block 0 Deg. Axial Circ BM: N/A HAZ: NIA (Yes i No) NO YES NO Crown HT: N/A Weld WIdth: N/A Reflector ID NOTCH Sweep Position I Depth in Inches 6.0 Amplitude In % 80%
Gain In dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Section 5 Tab B Page 7 of 10
CJ,0 , 7f(-627' A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AREVA AnjSite: Browns Ferry Unit 3 I Exam Date: 3/10/06 I Summary No.: U3C12-NIA-NV I Calibration No.: N1A-CS03 MTNozzle ID.: RPV N1A Component ID: RPV NIA Exam
Description:
28" Outlet Recirculation Nozzle to Vessel Weld j ASME Section XI: 2001 with 2003 Addenda /
Drawing No.: 3-ISI-0328-C Procedure No. / Rev.: 54-ISI-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6_1" Nozzle Diameter: 28" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Senal No.: OOXlXJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83"F Comp.: 77°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 7.92" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity:. 129 in/psec. Nominal Refracted Angle: 60' Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 59' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfAppliceble): NA Serial No.: 037405 Type: Rompas Damping: 500 D Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): NA Reflector: 10 13 Filter: Filter 2 Reject: 0% Wedge Radius (IfApplicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12 ". Amp: %: 100 40 Mode: []Dual NPulse Echo No. of Intermediate Connectors: 0 Gain dB: 56.8 56.8 Jack: gTransmit r'Receive DAC PLOT I
Ref. Sensitivity: 73.2 d8 A
U Iscan Sensitivity: 82.0 dB U ~
CALIBRATION I VERIFICATION TIMES Date Time Initials Initial Cal 3110/06 20:12 7"8 Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Iermediate: NA NA NA 0° THICKNESS DATA Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A Final Cal.: 3/10106 23:38 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5,6 Amplitude in % FSH 80%
Gain in dB 73.2 Notes: Nozzle to Shell 6" delay on screen Examiner.
Sin Thomas Brown Level: It Examiner: N/A Date: 3/10/06 Level: N/A Date: NMA Sign:
,_o, gn4ý.X m k .1. -
V Sign: =.-:Q PReviewed:d t, [ Le Date: 3/27106 ANII Review:/'9 Sign: ___V Date-1-1"2- i/At I
51-9015478-000 K... I Section 5 Tab B
-- -~ -.--.
Page 8 of 10 11,
r:.,V K- 0 "1 A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AREVA r-. jSite: Browns Ferry Unit 3 II'J, Noz eD.:RPN1 I Exam Date: 3110t06 I Summary No.: U3C12-N1A-NV I Calibration No.: N1A-CS04 "WrNozzle ID.: RPV N1A
[Component ID: RPVNIA I Exam
Description:
28" Outlet Recirculation Nozzle to Vessel Weld j ASME Section XI: 2001 with 2003 Addenda Drawng No.: 3-ISI-0328-C Procedure No. / Rev,; 54-181-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 28' INSTRUMENT SETTINGS SEARCH UNIT CAUBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model! Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5H Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83°F Comp.: 77*F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 8.03' Mode: Shear Conflg.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 43" Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle :45" CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApp/icab/e): 106 + Serial No.: 037405 Type: Rompas Damping: 500 1) Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 106 Reflector: 7 10 Filter: Filter 2 Reject: 0% Wedge Radius (IrAppticable): 5.25" Sweep Div.: 1 4 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 90 Mode: E-]Dual SPulse Echo No. of Intermediate Connectors: 0 Gain dB: 57.4 574 Jack: NTransmit []Receive DAC PLOT Ref.Sensitivity: 57.6 dB W-Scan Sensitivity: 6.4-0 dB 100 CALIBRATION I VERIFICATION TIMES 90 Date Time Initials 80 Initial Cal: 3/10106 20.07 7"? 70 Intermediate: NA NA NA 60 Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA Intermediate: NA NA NA 0° THICKNESS DATA Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A 0 1 2 3 4 5 6 7 8 9 10ý Final Cal.: 3/10/06 23:33 7-458 Weld CL: NIA I At Indication: N/A Calibration Reflector(s) Notch Sweep Position 2.5 Amplitude in % FSH 80%
Gain in dB 57.6 Notes: Nozzle to Shell 6" delay on screen Examiner ,T.omas Brow. Level: 1 Examiner: N/A Date: 3/10/06 Level: N/A Date: NjA LSgn: *YR -j,/,-,--- - Sign:
m J -
q PReviewed-Sign:
Ada
, a n,,., Level: III Date: 3/27/06 ANI[ Review:
Sign:
Date-
,%5744'6
- l - .-- * . i
-- i 51-9015478-000 Section 5 Tab B Page 9 of 10 IV/
A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA I Site: Browns Ferry Unit 3 Nozzle ID.: RPV NIA Exam Date: 3/10/06 Summary No.: U3C12-NIA-NV Calibration No.: N1A-CS05 Component ID: RPV NIA Exam
Description:
28" Outlet Recirculation Nozzle to Vessel Weld ASME Section XI: 2001 with 2003 Addenda Drawing No.: 3-ISI-0328-C Procedure No. I Rev.: 54-1SI-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness; 6.1" Nozzle Diameter: 28" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 0158JR Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: ,5X1.0" Tamp: Block; 83°F Comp.: 77'F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 8.03" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 In/ljsec. Nominal Refracted Angle: 43' Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle: 46-' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (ifApplicable): 106 - Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 100 Reflector: 7 10 Filter: Filter 2 Reject: 0% Wedge Radius (If Applicable): 5.25" Sweep Div.: 1 4 Pulsa Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 90 Mode: []Dual OPulse Echo No. of Intermediate Connectors: 0 Gain dB: 57.4 57.4 Jack: STransmit OReceive DAC PLOT Ref. Sensitivity: 57.6 dB hScan Sensitivity: 68.0 dB 100 IV CALIBRATION I VERIFICATION TIMES 90 Date Time Initials 80 Initial Cal: 3/10106 20:15 71 70 Intermediate: NA NA NA 60 Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 Intermediate: NA NA NA 10 0" THICKNESS DATA 0 . ... ... . . . ....
Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A 0 1 23 4 5 6 7 8 9 10!
Final Cal.: 3/10/06 23:30 7'/Y Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 2.7 Amplitude in % FSH 80%
Gain In dB 57.6 Notes: Nozzle to Shell 6" delay on screen Examiner- Thorpps Brown Level: 11 Examiner: N/A Date: NIA
~Sign: Date: 3/10/06 Level: N/A
- 7) Af Sign:
m I U Reviewed: Ada..
Sign: . ~ .. Level. III Date: 3/27/00 ANII Review:/(
Sign:
Date:
Section 5 Tab B Page 10 of 10 51 4i01 5418-000 5 1-9015478-000 Section 5 Tab B Page 10 of 10
Weld Examination Report R-057 NIA-IR, N2B-IR, N2D-IR, N2F-IR, N3B-IR, N5A-IR, And N8A-IR Inner Radius Examinations for RECIRC Outlet (1) . RECIRC Inlet (3) , Main Steam (1), Core Spray (1), and RECIRC Instrumentation (1) Nozzle
0 A RPV Roll-out Map Inside View AREVA 180" 2 10. 240* 270' 30D' 330* O 30* 60, me 120, ISO* 1 ON" Ii 0 NIZA 0_ _
CD 42F NZH CD EL 1255' Rererence SK-B3010 xms e IR
'1 NmuJJE 1PRDIKCT tIV4[PAAO WY.
I0rowns Forry U3 I LclR RPVROLL-OUT- Inside View I f~lo1~o~oHO I
A AR EVA Browns Ferry3 - 12 - (2006 Outage)
Visual Inspection of RPV Interior Revision 0
~~~' .1 ~ .a ~ Exam Component/ Description
___
___ ___ _ ~ Li. ~ 8~ I-- Results Remarks/Comments RPV Interior Nozzle Inner Radius examination limited to EVT-1 accessable areas due to the proximity of the N2-B IR 60 VT- 26 Yes NA 17 8 NRI DJB II 1 1/Mar/D06 Riser and Diffusers. Est. 40% Coverage.
Include overall VT-3 for ASME SECT. Xl (B-N-1 B13.10). LCR Nozzle Inner Radius examination limited to EVT-1 .accessableareas due to the proximity of the N2-D IR 1200 VT-1 26 Yes NA 17 6 NRI DJB U 11/Mar/06 Riser and Diffusers. Est. 40% Coverage. Include V'I'-3 overall VT-3 for ASME SECT. XA(B-N-i, 3B13.10). LCR Nozzle Inner Radius examination limited to accessable areas due to the proximity of the N2-F IR 2100 EVT-1 2 Y N Riser, Diffusers and the Surveillance sample VT- 23 holder above. Est. 40% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-i, B13.10). LCR Nozzle Inner Radius examination limited to 240° accessable areas due to the proximity of the N2-0 IR EVT-1 26 Yes NA 17 4 NRI DJB II 11/Mar/06 Riser and Diffusers. Est 40% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-1, 3B13.10). LCR Nozzle Inner Radius examination limited to EVT-1 accessable areas due to the proximity of the N2-H IR 270* 25 Yes NA 15 4 NRI JLB 11 10/Mar/06 Riser and Diffusers. Est. 40% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-1, 3B13.10). LCR Nozzle Inner Radius examination limited to EVT-1 accessable areas due to the proximity of the N2-J IR 3000 V13 22 Yes NA 12 3 /4 NRI AJ / JLB 11 10/Mar/06 Riser and Diffusers. Est. 40% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-1, 3B13.10) LCR Nozzle Inner Radius examination limited to EVT-1 accessable areas due to the proximity of the N2-K IR 331V 22 Yes NA 11 15 1 16 NRI DJB II 9/Mar/06 Riser and Diffusers. Est. 40% Coverage. Include overall VT-3 for ASME SECT. Xl (B-N-1, B13.10). LCR Exam Results Key: N/A = Not Applicable, NRI = No Relevant Indications, RI = Relevant Indication Page I of 3
Browns Ferry3-' 12 - (2006 Outage)
AREVA Visual Inspection of RPVlnteror Revision 0 Exam Component escpon Results Remarks/Comments Examined Nozzle Inner Radius from outer nozzle EVT-1 22 Yes NA 5 NRI JIB 9/Mar/6 to vessel tangential point to 8" inside nozzle VT-3 bore. Est. 90% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-1, B13.10). LCR Examined Nozzle Inner Radius from outer nozzle N3-B IR 1100 EVT-1 I yes NA 1 2/3 NRI DR 11 2/Mar/06 to vessel tangential point to 8" inside nozzle VT-3 bore. Est. 90% Coverage. Include overall VT-3 for ASME SECT. Xl (B-N-1, B13.10). LCR Examined Nozzle Inner Radius from outer nozzle N3-C IR 260' EVT-1 1 yes NA 1 NRI DR 11 2/Mar/D6 to vessel tangential point to 8" inside nozzle VT-3 bore. Est. 90% Coverage. Include overall VT-3 for ASME SECT. Xl (B-N-1i B13.10). LCR Examined Nozzle Inner Radius from outer nozzle EVr-1 I ye 1 5 NW CMT 11 2/Mar/06 to vessel tangential point to 8" inside nozzle VT-3 bore. Est. 90% Coverage. Include overall VT-3 for ASME SECT. XI (B-N-1i B13.10). LCR Nozzle Inner Radius examination limited to N-AIR 12 EVT-1 Yes NA 6 9 NRI JIB I1 7/Mar/06 accessable areas due to the proximity ofWhe T-VT-3 Box and thermal sleeve. Include overall VT-3 for ASME SECT. XI (B-N-1i B13.10). LCR ,*l.
-*I-' ___a_ Y, C C.-.,. &A 9*
Nozzle Inner Radius examination limited to EVT-l accessable areas due to the proximity of the NB-A IR 105° 26 Yes NA 17 7 NRI DJB II 11/Mar/06 Diffusers and the JP Instrument lines. Est. 40%
Coverage. Include overall VT-3 for ASME SECT.
Xl (B-N-1, B13.10). LCR Nozzle Inner Radius examination limited to EVT-1 accessable areas due to the proximity of the N8-B IR 285" 22 Yes NA 12 7/8 NRI JILB II 10/Mar/06 Diffusers and the JP Instrument lines. Est. 40%
Coverage. Include overall VT-3 for ASME SECT.
XI (B-N-I, B13.10). LCR Exam Results Key: N/A = Not Applicable, NRI = No Relevant Indications, RI = Relevant Indication Page 2 of 3
Browns Ferry 3 - IEle 12 - (2006 Outage)
Visual Inspectionof RPV Interior Revision 0 AREVA Component/ Descrdpton '04W I 1IE~
-a "i. E Exam eu 6 Remarks/Comments oz E Reslt koll ý Level: ii Date:
Level: II Date:
Level: II Date: L3 C)Zo Level: II Date: 3-/S-1-06 Level: ii Date: 3 ot4 FRA-ANP Level III Review: ICR k. OL J-r63 Zr 0
LG Exam Results Key: NIA = Not Applicable, NRI = No Relevant Indications, RI = Relevant Indication Page 3 of 3
Weld Examination Report R-080 N2B-N/V RECIRC Inlet Nozzle
C~C.z~i3O ie-'0*0 I A EXAMINATION
SUMMARY
AREVA Exam Date: 311012006 Summary No.: U3C12-N2B-NV Examination Data Sheet: N2B-DS01, N2B-DS02 I E310I2006 3110/2006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: Recirculation Inlet/N2B-NV Examination Procedures: 541SI-850-03* N.UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number. IR-2003-19 Section 3 Calibration Sheets No(s):
N2B-CS01 N2B-CS04 Examination Category: B-D N2B-CS02 N2B-CS05 N2B-CS03 ISO I Drawing: N2I3-1SI-0328-C Examination 10 No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: E] Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 0 Geometric
- SDCN: 30-9015396-00 oummary.
7VIQ PF ,w~44" A'r KU*'4 IT'777(
~5 Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C12.
In accordance with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel n rface in both the radial and circumferential scan directions. These examinations resulted In no reportable indications.
n accordance with UT Procedure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Recirculation Inlet (N2) Nozzle Modeling Parameters Probe Probe Skew Scan Surface 600 Shear +/-(36 to 66) Vessel 400 Shear +/-120 Blend 42% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of I OCFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K)was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 51.39% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-3271328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a 1/2" on each side.
This examination satisfies the requirements of ASME Sec. XI (2001with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec XI, Appendix ViII qualified personnel, procedures, and equipment as amended by the Final Rule.
.4A repared By: Wade Holloway LVII Date: 3W10/2006 Reviewed 1in: z/7 Sign:
stomer: Matt Welcla "'--W'o Date:
ANII Review:
Iasic l l I
I 51-9015478-000 Section 5 Tab 1ý
Exam Date / Time: 03/1012006 20:45 Examination Data Sheet No.: N2B-DS01 A UT EXAMINATION DATA SHEET Iso / Drawing: N213-ISI-032B-C Calibration Sheet: N2B-CS01. N28-CS02 AREVA Wo: Nozzle Boss To Blend Radius Exam Angle: 6ORL Customer: Browns Ferry Unit 3 System I Component I.D.: RPV Nozzle N2B Lo: TDC Procedure No.: N-UT-78-03 Component
Description:
12 Recirculation Inlet Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
=Cune Clockwise RBR = Remaining Back Reflection CCW = Clockwise US = Up Stream I CW = Depth rTWD = Through Wall Dimension w IPi o = Downstream Wmax = Dist From CL at Max Amplitude w2 DS HMA = Half
= Dist Max FromAmplitude Ref Pt at Max. WI a Dac (Forward)
= Dist From C IL at S ifi 0 o ded a Apec Lmax Amplitude Dis Fro at cd LI - L2 = End Point 1&2 (Lateral W2 = Dist From CL at Specified %of Movement) Dac (Badcward) L
ND% SFORWARD CW ICCW DAC sMAXIMUM AMPLITUDE a a ? ° W1 D1 W2
? °lomment TWD or WIDTH CKWARDgt Li Dimensions C D1 NO RECORDABLE INDICATIONS Notes: C-,
(Cj
- 1. Search unit orientation: radial and circumferential. Q
- 2. Examination limitation and ASME Code coverage is provided on the Ultrasonic Examnination Limitation and Coverage Worksheets. 1"--**
Examiner: Wade Holloway Levet: II Date: 03110106 Examiner: N/A Level: Date: Reviewr/ dam AConti, Level: III Date: 03/22106 cz ANtI Review: F Date:
5 T C P0 Secio 1
51-9015478-000 Section 5 Tab C Page 2 ofX11
Exam Date I Time: 3/10/06 20:30 Examination Data Sheet No.:N2B-DS02 UT EXAMINATION DATA SHEET iso / Drawing: N2/3-ISI-0328-C Calibration Sheet: N2B-CS03,N2B-CS04 ARE EVA AREVAN2B-CS05 Wo: Nozzle BossTo Blend Radius Exam Angle: 40°S, 60°S Customer: Browns Ferry Unit 3 System / Component I.D.: RPV Nozzle N2B Lo: TDC Procedure No.: 54-ISI-850-03 Component
Description:
12 Recirculation Inlet Nozzle to Vessel Weld Exam Surface: 00 Inner 15%
=WCounter Clockwise RBR = Remaining Back Reflection U CW = Clockwise US = Up Stream I P1
= Depth TWD = Through Wall Dimension W2 D
= Downstream Wmax = Dist From CL at Max Amplitude
= Half Max Amplitude WI = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dec (Forward) __
Lm-1 Amplitude W2 = Dist From CL at Specified % of -
= End Point 1&2 (Lateral Dac (Backward) iI Movement) A US DS MAXIMUM AMPLITUDE TWD or WIDTH IND FORWARD I BACKWARD Length Dimensions Comments
- CW_N /CCW
__US _ DAC Max I W Max L Max W ID W2 1 D1 L2 D2 NO RECORDABLE INDICATIONS Notes:
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets. Ci Examiner. Thomas Brown Level: II Date: 3/10/2006 Examiner. N/A Level: Date: Reviewed: m Conti Level: Date:3/22/D6 I--,.
ANI Revi ~ Date:_ _ __ _ _ __ _ _ __ _ _
51-9015478-000 Section 5 Tab C Page 3 of W11 A"161e6
A RPV Nozzle-To-Shell Weld Ultrasonic Examination Limitation and Coverage Worksheet AR EVA Utility: TVA Plant: BFN3 Unit 3 Weld ID: N2B Date: 03/21/06 1 Summary NQ: U3C12-N2B-NV Axial scans are performed with a procedure for the examination of vessel shell welds. This procedure has been demonstrated for detection of flaws located throughout the entire weld thickness.
Coverage obtainedduring axial scans is typically limited due to nozzle configuration.
In the circumferentialscan direction the outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in the circumferentialscan direction a second examinationis performed with a proceduredemonstratedfor nozzle inside-radius UT. This procedurehas been demonstratedfor detection of flaws in the inner 15%-t only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanning is performed with severalsearch units from the nozzle blend.
Axial Scans CircumferentialScans 100%.t0/ Inner 15%-t Outer 85%-t Examination Procedure: N-UT-78-03 Examination Procedure: 54-1SI-850-03 Examtination Procedure: N-UT-78-03 ARequired Examination Volume: 43.732 Inches Dinner 15%-t Examination Volume: 5.01inches. 'Outer 85%-t Examination Volume: 38.72'inches.
60°RL axial scan limited: NYes E-No LCoverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: MYes []No Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: LjYes No Description of Limitation: Nozzle Blend Radius "Total Axial Volume Achieved: 24.912 inches Description of Limitation: N/A iHOter 85-t% Volume Achieved: 7.015l'nches "Inner 15%-t Volume Achieved: 5.011inches.
LPercentage of Axial Coverage: 57% "lTotalCircumferential Examination Coverage: 27% 1 2'D B+AX I100= C (F+ H)+ A= J CombinedAxial and CircumferentialWeld Coverage C3 LTotal Examination Coverage: 42%,/
(C+J)* 2 = L Prepared by: Bret Flesner Date: 03/22/06 R Date:0322n06 ANII Review: Date:
f 51-9015478-000 Section 5 Tab C Page 4 of W11
-6 A RPV Nozzle-To-Shell Weld Ultrasonic Exanination Limitation and Coverage Worksheet AR EVA Utility: TVA Plant: BFN3 Unit: 3 Weld ID: N2B Date: 03/22/06 Summary No: U3C12-N2B-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with +/-10° skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
Circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 42% coverage.
C-a-.
/06 ANII Review: Date:
I 51-9015478-000 Section 5 Tab C I i/l-';
Page 5 ofw//
A-116104
q 1A I ý `_1 ", -1 ill ý - '*m" - "ý. . I I________________ I~CU 5 A UT CALIBRATION DATA SHEET AREVA stomer: Browns Ferry Unit 3 j Exam Date: 03/1012006 Calibration No.: N2B-CS0I Fstem I Component I.D.: RPV Nozzle N2B Component
Description:
12" Recirculation Inlet Nozzle to Vessel Weld (Zone-1 Examination)
ISO I Drawing No.: 34SI-0328-C Procedure No. I Rev.: N-UT-7813 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer Model: USN5OL Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial / MT&E #: 0100DO Model:TRL2-AUST Size: 2(24x42) '/A Thickness (in): 6.1 Da rn): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 821 Temp (F) Comp.: 75' Delay: 14.00 ijS Range: 8.0 Conflg.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 0.8 Nominal Angle: 600 Measured: 01° Couplant: Ultragel II Batch"No.; 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174 125' Serial No.: 03-7406 Damping: 1 K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
Carbon Steel Rompes Rep. Rate: Auto High DAC PLOT Reflectors NIA Pulse Amp: Fixed Pulsar: High Sweep Position N/A NIA Reference Sensitivity: 59.0 dB I00 Signal Amp ( NA N/A Scan Sensitivity: 73.0 dB 90. Gain DB (dB): N/A N/A 80 -
70- Probe Squint Angle 30 60 *. .. . Probe Focus: FD -2.70" CALIBRAT10N CHECK 50_
Date/Time OK Initials 40 Initial Cal: 3/10/06 2045 X 1621, 30 Init. Sirm. Cal: N/A N/A 20 Intermediat2: N/A N/A 10 Intermediate: N/A NIA 0 DEGREE WELD THICKNESS ONLY 0 1 2 3 4 5 6 7 8 9 10 Ii Component; NIA Intermediate: N/A N/A Intermediate: N/A N/A BM: N/A HAZ: N/A Intermediate: N/A NIA Circ Scan Exam Angle is -- the Inverse sine of CIL Weld: N/A the Nominal IDIOD ratio?
Final Cal: 3/10106 2302 X j,, [] YES NO [] NIA Component: N/A Beam Direction on Calibration Block 0 Deg. Axial Circ aM: N/A HAZ: NIA (Yes I No) NO YES NO Crown HT: N/A Weld Width: N/A Reflector 1/4T SOH Sweep Position / Depth in Inches 3.6 -
Amplitude in % 80%
Gain In dB 59.0 dB Notes: The 60° Zone-1 ultrasonic examination.
I 51-9015478-000 Section 5 Tab C Page 6 of ;0 //
t--4/Vo
C, 0 goi I A UT CALIBRATION DATA SHEET AR EVA 4-daoer: Browns Ferry Unit 3 03110/2006 IExam Date: Calibration No.: N2B-CS02 item I Component I.D.: RPV Nozzle N2B Component
Description:
12" Recirculation Inlet Nozzle to Vessel Weld (Zone-2 Examination)
ISO I Drawing No.: 3.1SI-0328-C Procedure No. I Rev.: N-UT-78 13 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42)1/4k Thickness (in): 6.12" FDiameter. (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 820 Temp (F) Comp.: 78*
Delay: 14.00 pS Range: 20.0 Conflg.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 2.0 Nominal Angle: 600 Measured: 610 Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-1741 25' Serial No.: 03-7406 Damping: 1 K Freq (MHz): 2-25 No. of Connectors: 0
Description:
Carbon Steel Rompas Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amrnp: Fixed uIlsar: Hign Sweep Position MA/. nl.M Reference Sensitivity: 72.0 dB 100 Signal Amp (%) NA NIA Scan Sensitivity: 80.0 dB 90 Gain DB (dB): NA NIA 80 70 Probe Squint Angle 30 60 Probe Focus: FD -2.70"
- ~
50
! m I4 CALIBRATION CHECK
"'Or Date/rime OK Initials 40 Initial Cal: 3110/06 2040 X I.,H. 30 Init. Sim. Cal: N/A N/A 20 Intermediate: NIA NIA 10 Intermediate: N/A NIA 0 0 DEGREE WELD THICKNESS ONLY Intermadlate: N/A NIA 0 1 2 3 4 5 6 7 8 9 10I Como~onent: NIA Intermediate: N/A N/A 1M: N/A HAZ: N/A Intermediate: N/A N/A Circ Scan Exam Angle is =< the inverse sine of CIL Weld: N/A the Nominal ID/CD ratio?
Final Cal: 3/10106 2300 X [] YES C NO 0 NIA Component: NIA Beam Direction on Calibration Block 0 Dog. Axial Circ BM: NIA HAZ; N/A (Yes I No) NO YES NO Crown HT: NIA Weld Width: NIA Reflector IDNOTCH Sweep Position I Depth in Inches 6.0 Amplitude in % 80%
Gain in dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
Examiner: ade Holloway Examiner: N/A Sign: Level: II Date: 3/10/06 Sign: Level: NA Date: N/A viewed: Ad .qC _ Lvl 1 ae /20 AN I I R~ovI %: J '.f Date-gn: Lee:Il Dt:32/6 Sign:
51-91547-00 Secion Ta C Pge~o~e/
51-9015478-000 Section 5 Tab C Page 7 of 10//
ýý, ý;,1 1 ";1 4F ett ý VA lrN,ýýý, , ý ý ý i: I I I
-_i c AREVA A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET
- e: Browns Ferry Unit 3 I Exam Date: 3110/06 Summary No.: U3C12-N2B-NV I Calibration No.: N2B-CS03 7we ID.: RPV N2B Component ID: RPV N2B Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section Xh: 2001 with 2003 Addenda Drawing No.: 3-1SI-0328-C Procedure No. / Rev.: 54-11S-850 /03 Figure No.; IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID.BF-18 Model: Sonic 136 Serial No.: 0OX1XJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83°F Comp.: 77"F Range: 10" Freq: 2.25 MHz ]78hape: Rectangle Thermometer VH: 9571 Delay: 7.92" Mode: Shear[ Config. Single Couplant Type: Ultragel II Velocity: .129 irpsec. Nominal Refracted Angle: 600 Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 59° CALIBRATION VERIFICATION BLOCK Freq..: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (KfApprtcable):36-66" Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 36"-66" Reflector 10 13 Filter. Filter 2 Reject: 0% Wedge Radius (It Applicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 40 Mode: ODual NPulse Echo No. of Intermediate Connectors: 0 Gain dB: 56.8 56.8 Jack: oTransmit []Receive DAC PLOT Ref. Sensitivity: 73.2 dB 1%an Sensitivity: 76.0 dB 100
- YCALIBRATION IVERIFICATION TIMES 90 Date Time Initials 80 Initial Cal: 3/10/06 20:12 70 Intermediate: NA NA NA 60 Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 Intermediate: NA NA 10 NA 00 THICKNESS DATA Intermediate: NA NA NA 0
a Upper Shell: N/A Lower Shell: N/A 01234567 n in Weld CL: N/A Final Cal.: 3/10/06 23:38 7-e I At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.6 Amplitude in % FSH 80%
Gain in dB 73.2 dB Notes: Nozzle to Shell 6" delay on screen Examiner: NIA Date: N/A Level: II Date: 3/10106 Level: N/A ai _______________________ .i.
Sign:
- -
-
viewed: , *f f Level: III ANII Reviei . _ Date:
Date: 3121106 Sn: Sign: L, -e- e_f eA I 0;111 *' - ,
51-9015478-000 Section 5 Tab C Page 8 of ý6//
"A/00
r -m C2'G.LL~8 LAAREVA RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET r
?: Browns Ferry Unit 3 I Exam Date: 3/10/06 I Summary No.: U3C12-N2B-NV I Calibration No.: N2B-CS04 aleID.: RPV N2B Component ID: RPV N28 Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section XI; 2001 with 2003 Addenda Drawing No.: 3-1SI-0328-C Procedure No. / Rev-: 54-ISI-850 /03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5J Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 63"F Comp.: 77°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.52" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/Itsec. Nominal Refracted Angle: 40° Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 42' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): 120 + Serial No.: 037405 Type: Rompas Damping: 500 £) Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 120 . Reflector: 7 10 Filter. Filter 2 Reject: 0% Wedge Radius (If Applicable): 3.5" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: -Dual ZPulse Echo No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2 Jack: OTransmit OReceive DAC PLOT
-, 0*
Ref. Sensitivity: 52.4 dB an Sensitivity: 59.0dB CALIBRATION J VERIFICATION TIMES I~9 Date I Time Initials Initial Cal: 3/10/06 20:08 Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Q*THICKNESS DATA Intermediate: NA NA NA Upper Shell: N/A ILower Shell: N/A 0 1 2 3 4 5 6 7 8 9 10 Final Cal.: 3/10/06 23:35 Weld CL: N/A I At Indication: N/A alibration Reflector(s) Notch Sweep Position 5,0 Amplitude In % FSH 80%
Gain in dB 52.4 Notes: Nozzle to Shell 3" delay on screen Examiner: Thomas Brown ii 3/10/06 Date:Date: Examiner NIA Level: N/A Date: NWA
"'ig ' *Level: /1010 Sian:
bviewed: svi" A
_,b 2 nti / .
gn: g, i. Level: IIl Date: 3/22/06 C Page9of~7/
51-9015478-000 51-9015478-000 Section 5 Section 5 Tab Tab C Page 9 of W//
4*46
I9r)
I AREVAI A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET e: Browns Ferry Unit 3 Exam Date: 3/10/06 I Summary No.: U3C12-N2B-NV Calibration No.: N2B-CS05 z16 D_! RPV N213I r
Component ID: RPV N2B Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section XI: 2001 with 2003 Addenda Drawing No.: 3-ISI-0328-C Procedure No. / Rev.: 54-1S1-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 0111PP Cal. Block Thickness: 6.12" Dia.: Fiat Sanal No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83'F Comp.: 77°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.52" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 40° Couplant Batch #: 05325 Eacrh Major Screen Div.: 1.0" Measured Refracted Angle: 40° CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Applicable): 120 - Serial No.: 037405 pe: Rompa Damping: 500 Q Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 120 Reflector: 7 10 Filter. Filter 2 Reject: 0% Wedge Radius (IfApp/icable): 3.5" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: []Dual ZPulse Echo No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2 Jack: OTransmit -]Receive DAC PLOT Ref. Sensitivity: 53.8 dB m P,,--
n Sensitivity: 59.0 dB 100 f-i-f-SCALIBRATION 1
I VERIFICATION TIMES I Date Time Initials 80 Initil Cal: - 3/10/06 20:10OD 70 Intermediate: NA NA NA 1 60 Intermediate: NA NA J NA Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA Intermediate: NA i NA NA 0100
..
0" THICKNESS DATA Intermediate: NA NA NA 0 1 Upper Shell: N/A Lower Shell: N/A I. - 2 3 4 5 6 7 8 9 10 Final Cal.: 3/10/06 23,34 Weld CL: N/A I At Indication: N/A Calibration Reflector(s) Notch Sweep Position 4.8 Amplitude in % FSH 80%
Gain in d5 53.8 dB Notes: Nozzle to Shell 3" delay on screen.
'~~A~tZFAI,/1L N/ jiE, 1)~,. 13OA )OZ' AWA~l /WlZ~dý 4o. 74'L/,
I I Examiner: A 4 A7,-t13 ROvJ.
Level: II1 _ Date: 3/10/06 Examiner: N/A
=gn: 4, ev41gi Level: N/A Date: N/A Sign:
i m
L I I viewed:Ad onnt Level: III Date: 3/21/2006 iReview:
ANII -
Date
~tziV9~4&,Q~
ja ia 51.9015478.000 Section 5 Tab C Page 10 of 51-g.015478.000 Section 5 Tab C Page 10 of 19
Welch, C From: Brown, Thomas [thomas0l .brown @wgint.com]
Sent: Tuesday, June 06, 2006 1:59 PM To: Welch, Matthew C
Subject:
N2B-NV on 03/10/2006 between the hours of 1800 & 0600 during U3C12 I performed a manual ultrasonic examination on N2B-NV transducer with a -120 degree skew. No Recordable outage. I scanned the nozzle blend with a 40 degree shearwave Indications were noted.
Thomas D. Brown NDE Level II Washington Group Int.
6 6~ 6~6 C-DA V
1
Weld Examination Report R-081 N2D-N/V RECIRC Inlet Nozzle
'p-ml A
AREVA EXAMINATION
SUMMARY
I/
Summary No.: U3C12-N2D-NV Examination Data Sheet: N2D-DS01, N2D-DS02 Exam Date: 31912006 - 3112006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System / Component ID: Recirculatlon InietIN2D-NV Examination Procedures: 54481-850-03" N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Section 3 Calibration Sheets No(s):
N2D-CS01 N2D-CS04 Examination Category: B-D N2D-C302 N2D-CS0O N2D-CS03 ISO I Drawing: N213-ISI-0328-C Examination Results:
0 No Reportable Indications Framatome ANP Safety Document Change Notices: R] Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 El Geometric
- SDCN: 30-9015396-00 Summary: a .,7R ., 5;7-3o"x-h41*. qq"... -W,06 Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C12.
In accordance with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel surface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
4 In accordance with UT Procedure 54-1S-850-03 and the referenced TVAIEPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Recirculation Inlet (N2) Nozzle Modeling P arameters Probe Probe Skew Scan Surface 60° Shear +/-(36 to 66) Vessel 40' Shear +/-120 Blend 42% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of IOCFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K)was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 51.39% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a 'A"on each side.
This examination satisfies the requirements of ASME Sec. XI (2001with 2003 Addenda), Category B-D, for Item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec X1, Appendix VIII qualified personnel, procedures, and equipment as amended by the Final Rule.
.ign:sin Matt Witich cstomer: &- 5fOk Dte Stgn:Z~ 5' ý 0 ANII Review: 4 610~,
51-9015478-000 Section 5 Tab 0 ' ' Page 1 of 10
0 Exam Date I Time: 03/0912006 23:22 Examination Data Sheet No.: N2D-DS01 A UT EXAMINATION DATA SHEET Iso/ Drawing: N2t3-ISI-0328-C Calibration Sheet: N2D-CS01, N2D-CS02 AREVA We: Nozzle Boss To Blend Radius Exam Angle: 60RL Customer: Browns Ferry Unit 3 System / Component I.D. RPV Nozzle N2D Lo: TDC Procedure No.: N-UT-78-03 Component
Description:
12 Recirculation Inlet Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
= Counter Clockwise RBR = Remaining Back Reflection CCW = Clockwise Us = Up Stream -I CW D
= Depth
= Downstream TWO Wmax
=
=
Through Wall Dimension Dist From CL at Max Amplitude !
.I,,,
DS = Half Max Amplitude III.~
W1 = Dist From CL at Specified % of wib HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude W2 = Dist From CL at Specified % of LI - L2 = End Point 1&2 (Lateral Dac (Backward) \ ¥ Iv 1 Movement)
US DS D ____MAXIMUM AMPLITUDE TWD or WIDTH Length Dimensions IND CW / CCW CCC DAC DC D I WMax I L Max I WFORWARD 1 DiI BACKWARD W2 LI D1 1__ D2 Comments NO RECORDABLE INDICATIONS Notes:
I
- 1. Search unit orientation: radial and circumferential.
- 2. Examination linitation and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Wade Holloway Level: II Date: 03/10106 Examiner:
- - I ANII Review: Date: i 4/6/o96 51-9015478-000 Section 5 Tab D Page 2 of 10
Exam Date / Time: 3/10/06 08:35 Examination Data Sheet No.:N2D-DS02 A UT EXAMINATION DATA SHEET AREVAN2D-CS05 Iso Drawing: N2/3-ISI-0328-C Calibration Sheet: N2D-CS03,N2D-CS04 Wo: Nozzle BossTo Blend Radius Exam Angle: 40'S, 60'S Customer: Browns Ferry Unit 3 System / Component I.D.: RPV Nozzle N2D Lo: TDC Procedure No-: 54-ISi-850-03 Component
Description:
12 Recirculation Inlet Nozzle to Vessel Weld Exam Surface: OD Inner 15%
Q Mtmf
= Counter Clockwise RBR = Remaining Back Reflection U CCW = Clockwise US = Up Stream CW = Depth TWD = Through Wall Dimension W I wýx o = Downstream Wmax = Dist From CL at Max Amplitude J Iw - _ __
DS = Half Max Amplitude Wl = Dist From CL at Specified % of .
HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude D L1 - L2 = End Point 1&2 (Lateral W2 Dist From CL at Specifed % of-Movement) Dac (Backward)
MAXIMUM AMPLITUDE TWD or WIDTH L ND US DS B Length Dimensions C
- A ONWICW DAC
% IW D I W Max I L Max W I D1 W2 D2 L1 D1 L2 ID2 NO RECORDABLE INDICATIONS 4 4-4-.'-
Notes:
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limilation and Coverage Worksheets.
Examiner: Mike W. Kleinjan Level: II Date: 3-10-06 Examiner: I Date:
NIw
- I I Page 3 of 10 51-9015478-000 Tab D Section 55 Tab D Page 3 of 10
A RPV Nozzle-To-Shell Weld AR EVA Ufltrasanlc Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit: 3 Weld ID: N2D Date: 03/21106 I Summary N,2: U3C12-N2D-NV Axial scans are performed with a procedurefor the examination of vessel shell welds. This procedurehas been demonstrated for detection of flaws located throughoutthe entire weld thickness.
Coverage obtained during axial scans is typically limited due to nozzle configuration.
In the circumferentialscan directionthe outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration, To achieve additionalcoverage in the circumferentialscan direction a second examination is performed with a procedure demonstrated for nozzle inside-radius UT. This procedure has been demonstratedfor detection of flaws in the inner 15%-t only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanningis performed with several search units from the nozzle blend.
Axial Scans CircumferentialScans 100%4t Inner 15%-t Outer 85%-t Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03
'Required Examination Volume: 43.73 2inches Dinner 15%-t Examination Volume: 5.01zinches. 0Outer 85%-t Examination Volume: 38.722inches.
60°RL axial scan limited: N'es E]No "Coverage Obtained by Modeling: 100% 60=RL Outer 85%-t Exam Limited: EgYes E-iNo Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: E-Yes [No Description of Limitation: Nozzle Blend Radius "Total Axial Volume Achieved: 24.912 inches Description of Limitation: N/A HOuter 85-t% Volume Achieved: 7.015 2 inches
'Inner 15%-t Volume Achieved: 5.0l'inches.
GPercentage of Axial Coverage: 57% 'Total Circumferential Examination Coverage: 27%
B+AXIOO=C (F + H)+ A=J CombinedAxial and CircumferentialWeld Coverage 1*
LTotal Examination Coverage: 42%
(C+J)+2=L Prepared by: Bret Flesner Date: 03/21106 Reviewm Cnt, Date:03/21106 Review.
-NII Date:
51-9015478-000 Section 5 Tab D Page 4 of 10
0 0 0
.A RPV Nozzle-To-Shell Weld AR EVA LUtr.a,6 Examination Limitation and Coverage Worksheet Utility: WA Plant BFN3 Unit: 3 Weld ID: N2D Date: 03/21/06 Summary No: U3C12-N2D-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with +/- 100 skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 42% coverage.
t_ .. . .CI_
N2 Nozzle-to-Shell C")
1- -,
-Tangential (Circumferential) Scan .
- Radial (Axial) Scan LA Prepared by: Bret Flesner Date: 03/21/06 Review m Conti Date:03/21/06 ANII Review: Date:
51.9015478-000 Section 5 Tab D Page 5 of 10
!ýl A i:11.
ý3vrii,40 ý,I I i, 911ill" ,!L(4ý* ".1,.,
11 -. , , , 24 ýA , , I I f, I'll21_ý,,
IN ý? ý,t! . ý, . '. .;_ .zJ I . I I, I , I .
L A UT CALIBRATION DATA SHEET AREVA ter: rowns Ferry Unit 3 Exam Date: 03/1012006 Calibration No.: N2D-CS01 System / Component ID.: RPV Nozzle N2D Component
Description:
12" Reclrculation Inlet Nozzle to Vessel Weld (Zone-I Examination)
ISO/ Drawing No.: 3-4SI-0328-C Procedure No. I Rev.: N-UT-78 /3 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: KrautkrameriModel: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial / MT&E #: 010000 Model:TRL2-AUST Size: 2(24x42)'/* Thickness (in): 6.12" Diameter.(in): Flat Mat. Cal. / Velocity: .2320 in/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 821 Tamp (F) Comp.: 78*
Delay: 14.0 iIS Range: 8.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 0.8 Nominal Angle: 600 Measured: 610 Couplant: Ultragel II TBatch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174 /25' Serial No.: 03-7406 Damping: 1 K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
Carbon Steel Rompas Rep. Rate: Auto High DAC PLOT Reflectors NIA Pulse Amp: Fixed Pulsar: High Sweep Position I NIA I NIA Reference Sensitivity; 59.0 dB 100 - -
Signal Amp (%) N/A 1 NA N/A Scan Sensitivity: 74.0 dB Gain DB (dB): NIA 80 70 Probe Squint Angle 3*
60 Probe Focus: FD -2.70" m I*R' CALIBRATION CHECK 1ý - 40 DatelTime OK Initials Initial Cal: 3109106 2322 X Init. Sim. Cal: N/A N/A 20
_J_ 7 9 1 Intermediate: N/A N/A 10 1 2..
Intermediate: NIA N/A 0 DEGREE WELD THICKNESS ONLY 0 1 2 3 4 5 6 7 8 9 10 I Intermediate: NIA N/A Component: NIA Intermediate: N/A N/A BM: NIA HAZ: NIA Intermediate: N/A N/A Circ Scan Exam Angle is =4 the inverse sine of C/L Weld: N/A the Nominal ID/OD ratio?
Final Cal: 3110106 0245 X A), H, [J YES NO 0 N/A Component: NIA Beam Direction on Calibration Block 0 Deg. Axial Circ BM: NIA HAZ: NIA (Yes / No) NO YES NO Crown HT: NIA Weld Width: N/A Reflector 1/4T SDH Sweep Position I Depth in Inches 3.6 Amplitude in % 80%
Gain in dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
I 51-9015478-000 Section 5 Tab D Page 6 of 10
AREVA A UT CALIBRATION DATA SHEET tmer: Browns Ferry Unit 3 Exam Date: 03110/2006 Calibration No.: N2D-CS02 System I Component I.D.: RPV Nozzle N2D Component
Description:
12" Recirculation Inlet Nozzle to Vessel Weld (Zone-2 Examination)
ISO I Drawing No.: 3-ISI-0328-C Procedure No. I Rev.: N-UT.78 13 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 034-48 Mfg: RTD Calibration Block No: BF-18 Serial / MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) 1/ 4A Thickness (in); 6.12" Diameter. (in): Flat Mat. Cal. i Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 821 Tamp (F) Comp.: 78*
Delay: 14.00 pS i Range: 20.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 2.0 Nominal Angle: 60 , Measured: 610 Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174 /25' Serial No.: 03-7406 Damping: I K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
Carbon Steel Rompas Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amp: Fixed I Pulsar: High Sweep Position NA N/A Reference Sensitivity: 72.0 dB Signal Amp (%) NA N/A Scan Sensitivity: 80.0 dB 9 Gain oB (dB): NA NIA 80-----
- 70. Probe Squint Angle 30 60 - - Probe Focus: FD -2.70" CAU'BRATION CHECK 50 Date/Timq OK Initials 40-Initial Cal: 13/09/06 2320 X . 30, Init. Sim. Cal:- N/A N/A 20-Intermediate: NIA N/A 10 Intermediate: I NIA N/A 0-0 DEGREE WELD THICKNESS ONLY Intermediate: N/A NIA 0123.Component: NIA Intermediate: - N/A NIA BM: NIA HAZ: N Intermediate: N/A N/A Circ Scan Exam Angle is =< the Inverse sine of CIL Weld: NIA C 11 2the Nominal ID/OD ratio?
Final Cal: 3/101060240 K[1 YES [3 NO 19 N/A Component: N/A Beam Direction on Calibration Block 0 Deg. Axial Circ BM: N/A HAZ: N/A (Yes I No) NO YES NO Crown HT: N/A Weld Width: NIA Reflector IDNOTCH Sweep Position I Depth in Inches 6.0 Amplitude in % 80%
Gain in dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Section 5 Tab D Page 7 of 10
.II ý1111 I 11ýNA111,11,11JI.-P - .
. ýt4 C 2C"J3 '-o A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AREVA
.Site: Browns Ferry Unit 3 Exam Date: 3/10/06 I Summary No.: U3C12-N2D-NV I Calibration No.: N2D-CS03 Nozzle ID.: RPV N2D Component ID: RPV N2D Exam
Description:
12' Inlet Recirculation Nozzle to Vessel Weld ASME Section XI: 2001 with 2003 Addenda Drawing No.: 3-!SI-0328-C Pmcedure No. / Rev.: 54-151-650 103 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Senal No.: OX1XJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200GC,81455 Size: .5X1.0' Temp: Block: 83°F Comp.: 77"F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 7.92" Mode: Shear Config.: Single Couplant Type: Ultragel 11 Velocity:. 129 in/psec. Nominal Refracted Angle: 60' Couplant Batch #: 05325 Each Major Screen Div: 1 0" Measured Refracted Angle: 590 CALIBRATION VERIFICATION BLOCK Freq.- 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Applicable):36'-66' Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (if Applicable): 36'-66" Reflector 10 13 Filter: Filter 2 Reject: 0% Wedge Radius (IfApplicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp- %: 100 40 Mode: [IDual [Pulse Echo No. of Intermediate Connectors; 0 Gain dB: 56.8 56.8 Jark: *;*raniumit [Receive DAC PLOT Ref Sensitivity: 73.2dB i&3can Sensitivity: 76.0 dB 100 "]
-- CALIBRATION/ VERIFICArlON TIMES so Date Time Initials so Initial Cal: 3/10106 0835 j-- 70 Intermediate: NA NA NA 60 .
Intermediate: NA NA NA so Intermediate: NA NA NA 40 .
Intermediate: InereaeN NA NA Intermediate:= NA NA NA NA 2 20 1, Intermediat NA NA NA 0 THICKNESS DATA Intermediate: NA NA NA 0 1 2 3 4 5 6 7 8 9 10 Upper Shell: N/A Lower Shell: N/A Final Cal.: 3100 - 1325 -' Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.6 Amplitude in % FSH 80%
Gain in d8 73.2 dB Notes: Nozzle to Shell 6" delay on screen rExaminr. 0ke WKieiniaa . Level: II Date: 3/10106 Examiner: N/A Level: N/A Date: N/A I ,/r. ý.kfile W *KSign:
.nivewed* -C4ti,/ -Level: III Date: 3/21/06 Riew: Date:
-NgniSign: &w:
51-9015478-000 Section 5 Tab D Page 8 of 10
,E~ ~/
A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA 4
Site. Browns Farry Unit 3 Exam Date. 3/10/06 Summary No.: U3C12-N2D-NV Calibration No, N2D-CS04 Nozzle iD.: RPV N2D1 Component ID: RPV N2D Exam
Description:
12' Inlet Recirculaton Nozzle to Vessel Weld ASME Section XI: 2001 with 2003 Addenda Drawing No.: 3-ISI-0328-C Procedure No. / Rev.: 54-ISI-850 1 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mtg.: Staveler Mfg.: KBA TModel: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5J Cal. Block Thickness: 6.12" Dia.: Flat Serial No.; 136PI1200G081455 Size: .5X1.0" Temp: Block: 83°F Comp.: 77"F Range: 10' Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.52' Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 400 Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 42" CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (ff Applicable): 120 + Serial No.: 037405 Type: Rompas Damping: 500 Q Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 120 Reflector: 7 10 Filter: Filter 2 Reject: 0% Wedge Radius (IfAppkicable): 3.5" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: E]Dual CgPulse Echo No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2 Jack: 01'ransmit [Recelve DAC PLOT
'a Ref. Senritivity: 52-4 dB
,scan Sensitivity: 63.0 dB CALIBRATION I VERIFICATION TIMES Date Time Initial Initial Cal: 3/10/06 0830 Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA Intermediate: NA NA NA 00 THICKNESS DATA Intermediate: NA NA Upper Shell: N/A ILower Shell: N/A 0 1 2 3 4 5 6 7 8 9 10 Final Cil.: 3/10/06 1320 Weld CL: N/A I At Indication: N/A CalibrationR~eilector(s) Notch Sweep Position 6.0 Amplitude in % FSH 80%
Gain in dB 52.4 Notes: Nozzle to Shell 3" delay on screen Examine i einjan Examiner: N/A Signe/: W .i - Level: II Date: 3/10/06 Level: N/A Date: N/A i... _ _)_ _ _ ,,,-7 ___**
_ _ __ _ Sign:
I reviewed. A , ay Conti sign: ý~?I( 'eAl .
Levl:II Ill Date: 3/21/06 ANII Review:f Sign:
- . Da 31 51-9015478-000 Section 5 Tab D Page?.of 10
I - I 'I, I i;U 141fI't , ", '_1.1:. . ,- . *,.' -I I . .
A.
A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA 4 !Site: Browns Ferry Unit 3 Nozzle ID,: RPV N2D Exam Date: 3/10/06 Summary No.: U3C12-N2D-NV Calibration No.: N2D-CS05 Component ID: RPV N21)
Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section Xl: 2001 with 2003 Addenda Drawing No.: 3-1I-0328-C Procedure No. I Rev.: 54-ISI-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA 7 =Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 0111PP Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83°F Comp.: 77°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay. 4.52" Mode. Shear Config.: Single Couplant Type: Ultragel II Velocity:. A21 in/psec. Nominal Refracted Angle: 40' Couplant Batch #: 05325 Each Major Scaeen Div.:1 .0'" Measured Refracted Angle : 40' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): 120 - Serial No.: 037405 Type: Rompas Damnping: 500 CI Rep. Rate: 2 Kl-z Measured Skew Angle (If Applicable): 120 Reflector: 7 10 Filter: Filter 2 Reject: 0% Wedge Radius (If Applicable): 3.5" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: rlDual ERPulse Echo No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2
[Jack: OTransmit [lReceive DAC PLOT I Ref. Sensitivity:
1Scan Sersitivity:
52.4 d13 63.0 dE3 100 ...... 1,717411
ý _-
CALU3RATION I %'IRIFICATION TIMES Date Time Initials 80 1 70 Cniti al:
Intermediate: J 3/10/10G NA 0815 N.A NA 60 Intermediate: J NA NA NA 50 intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 Intermediate: NA NA NA 10 0" THICKNESS DATA Intermediate: NA NA NA 0 Upper Shell: NIA Lower Shell: N/A 0 1 Final C-l.: 3/10106 1318 Weld CL: N/A At Indication: N/A Calibraiion Rpelector(s) Notch S:weep Position 4.8 Amplitude in % FSH 80%
Gain In dB 52.4 dB Notes: Nozzle to Shell 3" delay on screen.
Examiner: Mika-.W Kleinj nLevel: Examiner: N/A
~Sign: Lee:I 11A~ Date: 3/10/06 Level: N/A Date: N/A
. Sign:
i 4
U1Reviewed: Ada dd11ti'1 t1 Level: III Date: 3/21/2006 ANII Review,")
Sign:____V..,
Date:
Ce-A.I A I.
51-9015478-000 Section 5 Tab D Page 10 of 10 C2*C2-OO,
Weld Examination Report R-082 N2F-N/V RECIRC Inlet Nozzle
- 511 A EXAMINATION
SUMMARY
Ui A FZE NJA Summary Mo.: U3C:'I2-N2F-NV Examination Data Sheet: N2F-DS01, N2F-DS02 Exam Date: 3/1012006 311012006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: Recirculatlon Inlet/N2F-NV Examination Procedures: 54-1SI-850-03" N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Section 3 Calibration Sheets Nots):
N2F-CSOI N2F-CS04 Examinati,.i* Categ1ory: B-D N2F-CS02 N2F-CS05 N2F-CS03 ISO / Drawing: N213-ISI-0328-C Exu~amination Mo Reportable Indications N
Results:
Framatorn .ANP Safet, Document Change Notices: [ Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 [] Geometric
- SDCN: 30.9015396-00 Summary: 1 7-t1 examiation were 73 aprn --155d rr 3 Manual ultrasonic examinations were performed on the refarenced wveld during Browns F-erry Unit 3 U3C12.
In Fccord,-,;e with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel
,Wurface in bulbth the radial and circumferential scan directions. These examinations rasulted in no reportable indications.
In accordance with UT Procedlure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations wnre performed. These examinations also resulted ;r no reportable indications.
Recirculation Inlet (N2) Nox3e Modeling Parameters.
Probe Probe Skew Scan Surface 160' S":hear- +/-(36 to 66'1 Vessel 40' Shear +/-120 Blend 42% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: T-.his ultr:asonit: examination was performed in accordance with the criteria of 100FR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K) was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 51.39% volumetric coverage due to no7:!e blend radius Interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-3271328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a 1/2" on each side.
This examination satisfies the requirements of ASME Sec. X1 (2001with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec XI, Appendix VIII qualified personnef, procedures, and equipment as amended by the Final Rule.
Pi-aedB.Wade Hoilloway L 11 Date: 3110,2006 Reviewed/By: A. Co L Ill Date:3/22/2006 a
U . icn-
, , . .
Culstorver: ftutt Yyilch__ f~D~te:
Sign: 'A . IAN II9e~~ L11104o 51-9015478-000 Section 5 Tab E ( Page 1 of 10 r.,'J I.
0 I Exam DaU-i Time: 03/10i£i% 2i:20 Examination Data Sheet No.: N2F-DS01 AR EVA IKEXAMINATION DATIA E Iso/Drawing: N2/3-lSi-03C-C Calibration Sheet: N22-C. r.:)F-CS02 AR EVA Wo: Nozzle Boss To Blend Rad*us { Exam Angle: 60RL
.-ustv.;er: Browns Ftrry Unih 5 System i Component I.D.: RPV Nozzle N2F Lc: TDC [Procedur No.: N-U "7-30 Component
Description:
12 Reciruulation Inlet Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
= Counter Clockwise RBR = Remaining Back Reflection U le CCW = Clockwise L!s = Up Stream CW = Depth TWD = Through Wall Dimension_ w -CL %mY M< eFPt From CL at Max A %motift--e <
DS = Half Max Amplitude W1Nax = Dist HMA =Dist From Rat Pt at Max.Da(Frrd Dist Frad CL at Specjifed % of From Lmax Amplitude W1 = Dc W2 = Dist From CL at Specified % of --
LmaL Amplit Li - L2 = End Point 1&2 (Lateral Dac (Backward)
Movement)
US D MAXIMUM AMPLITUDE TWD or WIDTH Length Dimensions IND US 0 % 1 1 FORWARD I BACKWARD LiComments 01WlCCW DDAC VV D2 Li 02 NO RECORDABLE INDICATIONS I.
Notes:
Search unit orientation: radial and circumferential.
- 2. Examination limitation and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Level: 11 Date: 03/10/06 Examiner: N/A Level: Date: Reviewed: A'a A. Conti Level: Ill Dale: 03/22/06 Examiner: Wade Holloway ANII view: Date:
C..-
51-9015478-000 Section 5 Tab E Page 2 of 10
Exam Date I Time: 3110105 20:50 Examination Datir Sheet N.: N2F-DS02 A RE ARE VA VA ¥? EXAMINATION DATA SHEET Iso/Drawing: N2/3-ISI-0328-C Calibration Sheet N2F-CS03,N2F-CS0 NFC0 4 Wo: Nozzle BosgTo Blend Radius Exam Angle: 400S. 60'S Customer Browns Ferry Unit 3 System / Component .D.: RPV Nouzle N2F Lo: TDC Procedure No.: 5,'-ISI-850-03 Coniponent
Description:
12 Recirculation Inlet Nozz's to Vessel Weld Exam Surface: 0D Innir 15%
= Counter Clockwise RBR = Remaining Back Reflection Im CCW = Clockwise US = Up Stream TWD = Through Wall Dimension W , w aw2 RegnP CW = Depth W2 I
=Downstream Wmax = Dist From CL at Max Amplitude D *i I HMA = Half IVax Amplitude WI = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dec (Forward) .- '
Lmax Amplitude W2 = Dist From CL at Specified % of L2 L1- L2 = End Point 1 &2 (Lateral Dac (Backward)
Movement)
MAXIMUM AM]PLTUDE TWD or WIDTH Length Dimensions IND W I FORWARD IACKWARD CommensI
_WGCD iL I G __=
" NO RECORDABLE INDICATIONS
_ _ _ _ _ _ _ 1 * - T Notes.
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Cocie coverage is provided on the Ultrasonic E*,;,mination Limitation and Coverage Worksheets.
Examiner: Thomas Brown Level: II Date: 3/10/2006 Examiner: N/A Level: Date: Reviewed: Conti Level: III Date:3/22/06 AN7IIR view: Date:
S....
C-.
51-9015478-000 Section 5 Tab E Page 3 of 10
... . T tion L tz1.1 Maixa and Coverage Worksheet AR EVA Utility: TVA Plant: BFN3 Unit: 3 Weld ID:. N-2F Date: 03i92/06 iSummary W_: U3CI2-N2F-N~V Axial scans aro pe.forrned with a procedure for the examination of vessel shell welds. Thi',v procedure has been demonstrated for detection of flaws located throughout the entire weld thickness.
Coverage obtained during axi'al scans is typically limited due ;o nozzle configuration.
/n the circumferentialscan direction the outer 85%-t is examined with the same vesse! procedure as above and typicallyv limited due to nozzle configuration. To achieve additionalcoverage in the circumferential scan direction a second examination is performed with a proceduredemonstrated for nozzle inside-radius UT. This procedure has been demonstrated for detection N,, of flaws in the inner 15%-t only. The nozzle inside-radius technique provides addition*a! coverage since the component is modlied and scanning is pe, formed with several search units from the nozzle blend.
Axial Scans CircumferentialScans 100%4__ Inner 15%-t Outer 85%4 Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 43.732 inches Dinner 15%-t Examination Volume: 5.01inches. jOuter 85%-t Examination Volume: 38.72 2 inches.
60°RL axial scan limited: MYes E]No - Coverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: ZYes E]No Descrtption of Limitation: ,NozzleBleno Radius Inner 15%-t Exam Umiled:-' yes Description of Limitation: Nozzle Blend Radius "Totai Axial Volume Achieved: 24.912 inches Descriptior of Limitation: N/A "Outer 85-t% Volume Achieved: 7.015 2inches
'lnner 15%4- Volume Achieved: 5.0l'inches.
'Percentage of Axial Coverage: 57% "Total Circumferential Examination Coverage: 27%
B+AXIOO=C (F+H)+ A=J Combined Axial and Circumferential Weld Coverage
'TotaI Examination Coverage: 42%
(C+J)+2=L
?.LPrepared by: Bret Flesner Date: 03/22/06 R: Ada Conti Date:03/22106 ANII Review: Date:
c , ,4,/R,/
/
51-9015478-000 Section 5 Tab E Page 4 of 10
A,* KTV Nozzle=To-Shell Weld AREVA IA2 RtAO EVand~~ Cover-ge WoIrksheet Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60WRL radiai and tangential scans were perormed
"
from the shell surface. K The tangential scans were performed with +/--10* skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 42% coverage.
- \- --
C N2 Nozzle-to-Shell
-Tangntial(Circumferential) ca
-=Radial(Axial) Scan :
Prepared by: Bret Flesner Date: 03122/06 Revie dam Conti Date:03/22/06 ANIl Review: Date:
-158 0 S 51-9015478-000 Section 5 Tab E Page 5 of 10
IM-UMMUNME A UT CALIBRATION DATA SHEET AREVA 4 Customer: Browns Ferry Unit 3 5y3tem I Co;riponent I,,.: RPV Nozzle N2F Exam Date: 0311012006 Calibration No.: N2F-CSOi Componlent Uescription: 12" Recircul~ition Inlet Nozzle to Ves.el Weld (Zone-1 Examination)
ýE JI ~twi: -1S'-l3,-..C
! 5l.: :rocodure No./ .*: N-UT-78 I I.
Material: Clcd CS Diameter: 12" Nozzle [Thickness: 6.1" Nominal INSTRUMViENT SETTING'S SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial/ MT&E #: 0100D0 Model:TRL2-AUST Size: 2(24x42) '/.A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. I VPlocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 820 Temp (F) Comp.: 78° Delay: 11.017 pS Ran.: 8.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 i - I Each Ma jor ':;creen Div. #: 0.& Nominal Angle: 60s Measured: 610 Couplant: Ultragel II Batch No.: 05325 I
Cal In Depth or Sord Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: Cable Type & Length: RG-1741 25' Serial No.: 03-7406 mp. t: o Hj'righ 2-25 No. of Connector.: 0
Description:
Carbon Steel Rompas F.'.Rnte: AUto High DAC PLOT Reflectors N/A
- ______ - -I Pulse Amp: Fixed I Pul!;ar: High Sweep Position N/A 100 , - -
Reference Sensitivity: 59,0 dB Signal Amp(%)77N/A Scan Sensitivity: 73.0 dB 90-70 Probe Squint Angle 3*
60 Probe Focus: FD -2.70" 4J*
p, -; ALIBI*ATION CHECK 50
'1, 0terrime OK( Initials 40 -
I'ilCal: 3/11 NI06' 20,45 X 30 I
1 20 Iniit. Sinm. C;1 : NIA NIA Iintermediat i. N/A NIA 10 Intermpad~ist.: NIANA 0 DEGREE WELD THICKNESS ONLY Intermediate: NIA I 0 1 2 3 4 5 6 7 8 9 10 I Component:
D-NIA N/A Intermediate: NIA N/A BM: NIA HAZ: N/A Intermediate: N/A N/A Circ Scan Exam Angle is =< the inverse sine of CIL Weld: N/A the Nominal ID/OD ratio? YES El NO o@oetNIA Final Cal: 3/10106 2302-- []~~~E Y NX []NA N/n N/A seam rji*ectior, on Calihratlon Eslock 0 Deg. Axial Circ aM: N/A HAZ: NIA
'Yer, / No- NO YES NO Crown HT: NIA Weld Width; NIA 1/4T SDN Sweep Po*,i'don I Depth in Inches 3.6 Amplitude in % 80%
Gain in dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
51-9015478-000 Section 5 Tab E Page 6 of 10
mm A2 PAGFUMMORM A UT CAUBRATION DATA SHEET AIREVA S, Ferny Unit 3 Exam Date: 03110/2006 Calibration No.: N2-CS2 SytmIComnponent I.D.: RPV No.ixle N2F - ______ ___-
Component Decription: 12" Recirculation Inlet Nozzle to Vessel Weld (Zone-2 Eeinilnatlon)
ISO~ I II~ L~~is.:C Procedure Ne. 1R'y.: H-UT-7 13 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkrameri Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #; 0100D0 Model: TRL2-AIST Size: 2(24x42) 1.A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. / Velocity: .2320 InJMicro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F)Block 82-T amp(F)ComF.:78 Delay: 1,.00P5 1]Rarng : 20.0 Config.; Dual Moda: Long. hermometer No,: VH- 9571 Each Major Sreen Div. #: 2.0 Nominal Angle: 600 Measuired: 810 Couplant: Ultragel II 1 Batch No.: 05325 Cal In Depth or Sound Path: Sound Path Fixture / Size: Integral _ CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-I74 / 26' r Serial No.: 03-7406 Dimphkq: 1 P. Fraq (M'Xz): 2 -25 NIo. of Connectors: 0 DascrIption: Carbon Steel Rompas 100 Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amp: Fixed I Pulsair: High Sweep Position I NA N/A Reference Sensitivity: 72.0 dB Signal Amp (%) NA ANIA Sean Sensitivity: 80.0 dB Gain DB (dB): NA NIA 80 -
70 -- - Probe Squint Angle 3° 60 ... . ..
Probe Focus: FD -2.70"
.~I(" ALIBRATION CIHECK 50 - 5
-- 0 _, -_ ... . .. -
Date.M me OK Initials 40 T--- -
Initial Oal: 3ilo/06 20/40 X Init. Sim. COl: NIA N/A 20 --
Intermediate: N/A NIA Intermediate: 4I N/A N/A 0 DEGREE WELD THICKNESS ONLY 0 1 2 3 4 5 6 7 8 9 10 0 DEGREE WELD THICKNESS ONLY Intermediate: NIA N/A Component: N/A Intermediate: H/A - N/A BM: N/A HAZ: N/A Interemediato: NIA NIA Circ Scan Exam Angle is =< the Inverse sine of C!L Weld: NIA the Nominal 10/0D ratio?
S 3//6_] X. YES [ NO 0 N/A Component: N/A Beam nir.ction on Caibr.tirn Block 0 Deg. Axial Circ BM: N/A HAZ: N/A (Yq I NO) NO YES NO Crown HT: NIA Weld Width: N/A R..flecior ID NOTCH Sweep Posit.on I Depth in Inches 6.0 Amplitude in % 80%
FGain in dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Section 5 Tab E 2
-1'5I 7 SIi"T*E; Page 7 of 10
L. .
ARPV
.:A R E VA*
ULTRASONIC CAUBRATION & EXAM DATA SHEET il -ite: Browns Forry Unit 3 Nozzle ID.: RPV N2F EYarn Date: 3/10/06 unmary No.: U3C12-N2,-NV Calibration NO.: N2F-CS03 Component ID: RPV N2F __
Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld LASME Section XI: 2001 with 2003 Addenda Drawing No.: 3-ISI-0328-C I Procedure No. /Rev.: 54-1Sl-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Stavelev_ _ Mfg.: KBA Model: enhmark Cal. Block ID: BF-18 Model: Sonic i36 Serial No.: OOXIXJ Cal. Block Thickness: 6.12" Die.: Flat Serial No.: 13,5P 1200GO8145; Size: .SX1.0" Temp: Block: 83°F Comp.: 77°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 7.92" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 60" Couplant Batch #: 05325 E:ich MNiJor S.-eeo Div.: 1.'" Measured Refract.a.d Angle : 59' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (if Applicable):36"-66" Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 36"-66' Reflector: 10 13 Filter: Filter 2 Reject: 0% Wedge Radius (IfApplicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-1 74 Length:12' Amp. %: 100 40 r - -- ---- ---- --- t Mole: F1-IuAl Pulse Echo No. of Intermediate Connector-: 0 Gain d8: . 56.8 56.8 p -- ==-.-
Jack: Ir rar:sri E1Recelvw. DAC PLOT I-R'f. Senitiity: 73.2 dB f'r"n Srit, : 713.0 dcb 100 .
U ~
-ART CALIBPA.TION I VERIFICATION TIMES 90 80 Ozte j Time Initials Initial Cal: 3/10/C,6 20:12 70 Intermediate: NA NA NA 60 50 Intermediate: NA NA NA In termediate: NA NA NA 40 -T lntermediatf: NA NA NA 30 I. _________
Intermediate: NA NA NA 20 Intermredicte' 10 O THICKNESS DATA NA NA NA
!,'itermediate: NA NA NA Upper Shell: N/A Lower Shell: NIA 0 1 2 3 4 5 6 7 8 9 10 Final Cal.: 3/10106 23:38 Weld CL: N/A I At Indication: N/A Calibralion Reflector(s) Notch Sweep Position 5.6 Amplitude in % FSH 80%
Gain in dB 73.2 dB Notes: No;.'.la to Shell 6" delay on screen LE.xamirna>.jlhomas PW k Level: II Examiner: N/A Level: N/A Date: N/A Date: 3/110/06 Sign:
K--
4
° ign:
eL
--
evel III
--.
Date: 3/22106 1
J ANII Review:
C
/2/)
-I ~
'Cl .,,,gate rZ~r~ate
'i't 91-9015478-000 Section 5 Tab E Page 8 of 10 I
ýMmaýpmm AR AREVA RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET I 1 ite: Browns Fen-y Unit 3
,ozaleID. RPVv N2F Exam Date: 3/10/06 Summary No.: U3C12-N2F-NV Calibration No. N2F-CS04 Component 11) RPV N2F Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section XI: 2001 with 2003 Addenda Drawing No., 3-ISI-0328-C Procedure No. I Rev.: 54-ISI-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12' INSTRUMENT SET-IINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model Scnic 136 Serial No.: 01BVSJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No-: 136P1200G081455 Size .5X1.0" Temp: Block: 83'F Comp.: 77°F Range: 10l" Freq: 2.25 MHz Shape Rectangle Thermometer VH: 9571 Deay: 4.F2 Mode: Sher Config.: Single Couplant Type: Ultragel 11
\elociy: .129 in/psoc. Nominal Refracted Angle: 40* Couplant Batch #. 05325 E MvýCx
,'-ll Sýri
- C~v.: 1.0' Measured Refract Angle: 42' CALIBRATION VERIFICATION BLOCK Fre,.: 2.25 MHz I Pulse: 222 uls Nominal Skew Angle (IfAppficalle): 120 + Serial No.: 037405 Type: Rompas Dcamping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 120 Reflector: 7 10 Filter: Filter 2 RPject: 01% Wedge Radius (If*Applicable): 3.5" Sweep Div.: 4 7 PulseAmplitude: Fixed Cable Type: RG-174 Length: 12' Amp. %: 100 30 Mode: C--Dual .PulseEcho No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2
.Jac.k: (O-rarvjnit []Recelve DAC PLOT 11 __ _ _ _ _ _ __ _ _ _ _ _
Ref
$esiiviy:52.4 d8 caSensitiviiy:
ri 59-0 dB 100 -
C.aLLCA:ION I VERIFICATION T:IMES 90 5.0-'
80 70 1 j '.
3, (1'1".]o NA NJA NA 60 -I Intermeia*te: _NA NrA NA 50 Intermediato: NA N-A NA 40 Intermediate: NA NA NA 30 -
Intermediate: NA NA NA 20 10 0* THICKNESS DATA Intermediate:
lnlermediatv:
NA NA NA NA NA NA 0 2. Upper Shell: N/A Lower Shell: N/A 0 -1 2 .3 4 5 6 7 8 9 10
Sweeu Position 5.0 p Amplitude in % FSH 80%
Gain in dB 52.4 Notes- Noz7.le to Shell 3" delay on screen Examiri6r: Thjmas Brown Lqvel: It Date 3/10/06 Examiner: NIA Level:
N/A Date: NIA Si-wq : - Level: Il Date: 3/22/06 Sign:
ANII Review:
Sicyn:. .-......,- /4 ... :.*1..
I Sign: V(,,
,pate:
__________________________________________
L l-"age ti or i U 51-9015475-000 5!1-90 15478-.000 Section 5 Section 5 TabTabEE Page 90orlU
~i1~iln~3UR:mt ____________________
£ LA AR _VA___
Browns Ferny Unit 3 Bite SJoleID': irv' N2F RPV ULTRASONIC CALIBRATION l Exam Date: 3/10/06 Summary No., U3C12-N2F-NV
& EXAM DATA SHEET Calibration No.: N2F-CS05 Component ID: RFV N2F Exam
Description:
12" Inlet Recirculation Nozzle to Vessel Weld ASME Section Xh: 2001 with 2003 Addenda Drawing No.: 3-lSI-0328-C Procedure No. / Rev.: 54-ISI-850 / 03 j Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley 'Mfg.: KBA j Model: Eenchmark Cal. Block ID: BF-1B Model: Sonic 13 Serial No.: 0111 PP Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 13-1. 120OG081455 Size: .5X1.0" Temp: Block: 83"F Comp.: 77°F Rangje: 10' FReq: 2.25 MHz ,Shape: Rectangle Thermometer VH: 9571 Deboy: 4,52" Mode: Shear Conlg.: Single Couplant Type: Ultragel II Velocity:. .12, in/psec. Nominal Refiacted Angle: 40' Couplant Batch #: 05325 E~chi Mair £Cci~en lDv.: 1.0"Measured Reffacted .Angle : 400 CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): 120 - Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 120 Reflector: 7 10 Filter: Filter 2 Reject: 0% Wedge Radius (ifApplicable): 3.5" Sweep Div.: 4 7 Fulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mole: [.OtiaL IgPulse Echo No. of Intermediate Connectors: 0 Gain dB: 36.2 36.2 Jack: F.Trar.r;,it L-]Receiva DAC PLOT I
R-. Se*njitivity: 53.8 dB n Ser:sitivity: 59.0 dB CALIBIATLON !VERIFiCATION TIMES Tie
____a ntials I Initial Cal: T10)(6 20:10 Intermediate: NA NA NA Intermediate: NA NA NA Interm*diate: NA NA NA Intermediate: NA NA NA hnterrylediaic NA NA NA NA NA I I I I.. L II 00 THICKNESS DATA Intermediat.: NA NA NA Upper Shell: NIA Lower Shell:
Shell: N/A DATA N/A 0 1 2 3 4 5 6 7 8 10 i Lower I ~......
THICKNESS She)*: N/A 0° Finr. (al.: 3/lOO'5 1 :?3:34 - Weld U*p,3er CL: N/A At lndian: N/A Calibrai'ion Rellerkir(a) Notch Sweep Position 4.8 Amplitude in % FSII 80%
Gain in 08 53.8 dB Notes: Nozzle to Shell 3"delay on screen.
I r-}amirrier:
.., " -.- .. .n;ornasr
.I" BroWn . . Le~vel:
. . 11 Date: 3/10106 Examinier: NIA Level: N/A Date: N/A So n'~
I!
' _____Sign:
~~ev ad~ .j; Level: Ill Date: 3/22/"2006 AI~~w/ ~ a 5' 914800 eton!a Et'g uD 1U019 51-9015478-000 Section 5 Tab E Page 10 ot 1U
Weld Examination Report R-083 N3B-N/V Main Steam Nozzle
I JýAltttLUI,#' ! I . ý i ý; rq,*"r.1fý,trýl",-:-,'.iý!":,f.-,k-' , . ý;- ! I rr A EXAMINATION
SUMMARY
Surnmary No.: U3C12-N3B-?IV Examination Data Shheet: NP.B-DS01, N3B-DS02 Exam Date: 3/712006
~ustrmer: .Jrowns Ferrp *nirt 3 SU3C12 Examination Methods: Ultrasonic System I Component ID: Main Steam/N3B-NV Examination Procedures: 54-1SI-850-O3* N-UT-78-03 o Ccmnpo;'-;,r,'
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Calibration Sheets No(s):
N3B-CS01 N3B-CS04 E-x"* m.t:, 7ategory: 0-0 N3B-CS02 N3B-CS05 N3B-CS03 SISO /IOrawing: kiS13-IlA-032L-C Examination N No Reportable Indications
- ______ Results:
FIi'mutoni .ANP Safrety 13,ccurment Change Notices: El Reportable Indications
- SDCN.: 30-5037583-00 *SDCN:30-90113214-0 *SDCN: 30-9015396-00J Geometric Summary: j/7- p / 4 '~ 37 ~ 5/kd Manual 1J'.raaonic examinations were performed on the riferenced weld during Browns Ferry Unit 3 U3C12.
'r z';'*:'dr<- with UT Proce dure N-UT-78-03, 60' Longitudinal wave examinations were performed from the vessel surface in both the radial ano circumferential scan directions. These examinations resulted in no reportable indications.
ac ln ce wi.h UT PI-,: ,.edure 54-ISI-850-03 and the referenced 1TAIEPRI modeling the following additional ac;or examinalions were performed. These examinations also resulted in no reportable indications.
Main Steam (N3) Nozzle Modeling Parameters Probe Probe Skew Scan Surface 60' Shear +/-(54 to 74 401, Shear +/-115 Blend 136% covcr*age of the required examination volume was obtained.
- \'rofe
- Rlf*2r to the nozzJo cive*-age sketrh for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ullrasonic e,.afmination was performed in -accordancewith the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K)was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 35.22% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500- 7 (a) and (b) to the weld plus a W1/2 on each side.
This exarfination satisfies the requirements of ASME Sec. XI (2001 Edition with 2003 Addenda), Category B-D, for item number U-3.90, figure number iWB 2500-7(a) exarn volume, and was performed using ASME Sec XI, Appendix VIII qualified personnci, procedures, a.nd equipment as amended by the Final Rule.
Prepard George Chp nReview ey: By: Ad Coti Lll Date:31222006 in . sign:
s_ _ _ ANII Revie wj, f 4 te 51 -9015478-000 Section 5 Tab J Page 1 of 10
@
Exam Date /Tinie: 3171t209.,21'...'-0 Examination Data Sheot No.: N3B-DSi, UT EXAMNA11AON DATA SH.EET !seo! Drawng: N3Z3-1l-S0329-f Calibration Sheet: N3B-CS01, N3B-CS02 ARE VA Wo: Nozzle Boss To Blend Radius Exam Angle: 6ORL Custumer: Browns Ferry Unit 3 Systemn / Component I i.D.: RPV Nozzle N-03 Lo: TDC Procedure No. N-L)T-78-"Y Component ,ccription. 26" Main Steam Nozz.e to Vessal Weld Exam Surface: OD Zone 1 2
Counter Clockwise RBR Remaining Back Reflection CCW = Clockwise US
Up Stream CW = Depth TW,D Through Wall Dimension D = Downstrearm Wax DS = Hair Max Ampiitude VV -
Dist From CL at Max Amplitude HMA = Dist From Ref Pt at Max.
Dist From CL at Specified % o(
Dac (Forward)
Lmax Amplitude W2 Li - L2 Dist From CL at Specified % of
= Eno Point 1&2 (Lateral Dac (Backward)
Movement)
S MAXIMUM AMPLITUDE I "P.VD or WIDTH Length Dimensions
!I A
lft/
CW IcCCW I
% I D I WM DAC o xl I MI FORWARD VY D1 I BACKWARD W2 D L; Dl L2 I 02
!
Comments NO RECORDABLE INDICATIONS Notes:
- 1. Search unit orientation: radial and circumferential.
- 2. Examination !imitaticn and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
O Examiner. George Chapman Level: II Date: 317(2006 Examiner: N/A Level: Date: Reviewed Conti evel: Ill Date: 3122/2006 ANIIew: /I Date:
'-r~_#4 Z_ __ _ _ _ _ __ _ _ _ _ _ __ __ __ __ __ __
51-9015478-000 Section 5 Tab J Page 2 of 10
Exam Date ! Timý: 317i:A3 12:44 Examination Data Srneet No.: N3B-DSD2 A !E'T EAINATRON DATIA SH-EET ltqo /Drawing: i'3/3-iSl-O329-C SCalibration Sheet: N3B-CS03.N3B-CS04 14N3B-CS05 AREVA Wo: Nozae- BouaTo EBk~nr Radius Exam Angie: 40S, 603 System I Component I.D.: RPV Nozzle N3B Lo: TDC Proceoure No.: 54-IS1-68U-03 Customer: Browns Ferry Unii 3 Component
Description:
7-0" Main Steam Nozzle to Vessel Weld Exam Cz',.Iace: DD Inner 15%"
Ceu I
= Counter Clockwise RBR = Remaining Back Reflection ULihe CCW = Clockwise us = Up Stream CW = Depth T WD Through Wall Dimension D = Downstream
= Hal, Max Amplitude Wma = Dist From CL at Max Amplitude DS HMA = Dist From Ret Pt at Max. W1 Dist From CL at Specified % of Dac (Forward) 7--
Lmax LI - 1L2 Amplitude
= End Point 1 &2 (Lateral W2 Dist From CL at Specified % of , IrA) ~~1=~~
Dac (Backward)
Movement)
MAXIMUM AMPLITUDE TWD or WIDTH Length Dimensions USDS IND UWCC I FORWARD I BACKWARD Comments cwtcw I DA o,"" 1....!
I D iG lWMaxI I -L Wi DI w2 D2 L1 i IL2 i D2
-~ -- - ________________________- + -
NO RECORDABLE INDICATIONS 0
C>
n Notes:
- 1. Search unit orientations: Tangential
- 2. Examination lim.itation, and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: MiWeVY. Kleirijan Level: 11 Date: 3./T2006 Examiner: N/A Level. Date: Reviewed: m Conti Level: III Date:3/22/2006 ANII Review: Date:
519054800 6Pg13of1 Scio 5Tb 51-9015478-000 Section 5 Tab J Page 3 of 10
RPV Nazze.-To-SheII Weed
~~ t~*~ ~ ~ nd Cover geWoset AR EVA Utility: TVA Unit: 3 Weici:'. Date: -.53,22,06 Summary Nq: U3C12-N3B-NV I Plant: BFN3 ]
Axial scans are performed with a procedurefor the examination of vessel shell welds. This procedure has been demonstratedfor deteciton of ,fla, C,'i. cehrouqhoutthe entire weld thickness.
Coverage obtaineddr,, T.j axial scans is typically limited due to nozzle configuration.
in the circumferentialscan direction the outer 85%-t is examined with the same vessael oprocedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in the circumferentialscan direction a second examination is performed with a procedure demonstratedfor nozzle inside-radius UT. This procedure has been demonstrated for detection of flews in the inner 1 5%-t only. The nozzle inside-radius technique provides ad;i'nuicoverage since the component is modeled and scan:ning is performed with several search units from the nozzle blend.
Axial Scans CircumferentialScans 100%4 Inner 15%-t Outer 85%4t Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 54.37-inches "Inner 15%-t Examination Volume: 5.39zinches. GOuter 85%-t Examination Volume: 48.982inches.
60°RL axial scan limited: MYes I'No ECoverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: NYes E-JNo Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: r-Yes NNo Description of Limitation: Nozzle Blend Radius B'Total Axial Volume Achieved: 22.6392 inches Description of Limitation: N/A mOuter 85-t% Volume Achieved: 10.3059 2inches Inner 15%-t Volume Achieved: 5.39 2inches.
( --
' Percentage of Axial Coverage: 42% JTotal Circumferential Examination Coverage: 29%
B+AX 100=C (F + H) + A=J CiimVhied Axial and Circurnferc--rialWeld Coverage LTota Examination Coverage: 36%
(C+J)+2=L Prepared by: Bret Flesner Date: 03/22/06 Reviewe by Adam Conti Date:03122106 ANIl eview: Date:
51-9015478-000 Section 5 Tab J Page 4 of 10
-t- .. * -. i..1-.r
_.o.--. ,*Z*7m C....:
Utilty:~FV TRant:. BFN3 L-110JjV..DA3 Z-,-: 182Z3G Summary ND2-UX1'J2N2t244 tV Tangential and radial scans are limited due to liftoff caused by The blend radius and transducer footprint 60RL,-rsr:i,ý- A-d tangential scans were performed from the shell surface.
The tangential scans were performed with +/-10' skew towards the weld and at varying distances from the i weld. I Circumferential scans with a second procedure were also performed from the blend radius. This techniaue has been deomensirated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 36% coverage.
I--
N3 Nozzle-to-Stie!!
C:)
U-C; Prepared by: Bret Flesner Date: 03/22/06 Reviewed bdam Conti Date:03/22/06 ANII Review: Date:
51-9015478-000 Section 5 Tab J Page 5 of 10
A
_AREVV.______ UT CALIBRATION DATA SHEET
,:,.utomer',wns Ferry Unit 3 Exam Date: 03r' 12006 j Calibration No.: N3B-CS01 SCmpoi[irnt ____ICmpnnt.. RPVNo~zz~iN3B ____
t'9qscription: 26" Main Steam Nozzle-to-Shell weld (Z I50 /Drawing No.: 34SI-0329-C FProcedure No.
Material. Clad CS Diameter: 26" Neozle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Model: I)SN50L Serial No: 03-848 '" mfg: RTD Calibration Block No: BF-18 Serial I MT8'ý; #: 010000 1 Modlel: TRL2-AIJ$T Sime: 2(24x42) 1/4A Thicknes, (In);.12" Diameter. (in): Flat Mat. Cal./ Vnloity: .2320 In/Micro Seconds Shape; Rectanglc Fseq: 2.0 MHz Temp (F) Block: 82' Temp (F) Comp: 88 1lay: 14.00 .IS liRanoe: LO0 Config.: Dual Mode: Long. Thermometer No.: VH-9571
. Majcw.chý;,:reen Div. 4: 0.8 N~ominal Angle: 68U Measured: 610 Couplant: Ultragel II Batch No.: 05325 Cal in Depth ,or Sound Path: Sound Fath Fixture I Size: integral CALIBRATION STANDARD SIMULATOR Filter: Full Waeve Reject: 0%
0 Cable Type & Length: RG-174 125' Serial No.: N/A Oimpin: '1 F. i-req (M&4z): 2 - 25 =io. of Cunneatori: 0
Description:
N/A Rep. Rzile: .iitht Hligh_______ DAC PLOT Reflectors 1 2 4-Pilse Amp: Fixed 1Pulear: High Sweep Position N/A NIA Rtiference Sensitivity: 59.0 dE 100 Signal Amp (%) N/A NIA Scan Sensiti ifry: 7r.0 dB 90 (dB): NIA N/A Gain 80 70 Probe Squint Angle 30 60 Probe Focus: Fl) -2.70"1
ýALIBIRATION CHFCK 50
_______ 1!ate/Time f F[Initials 40 30 3I7IOE, 12fl0 N/A NIA 20 lnftermtadiate; N/A NIA7 0 L ' , ...... ..
InIermedial~e: 1 NIA N/A 0 1 2 3 4 5 6 - 9 1 0 DEGREE WELD THICKNESS ONLY
...
N/A I f N/A ComlDlnnent: NIA
$ *.
lntarmdiats;j N/A M: 'i 7~T~~N/A iLnemdiaE? W/A NIA Circ Scan Exam Ansle ir, -: the inverse sine of C/IL. Weld: N/A Final Cal: 3/17106 1535 IX the Nominal ID/OD ratio?
ri V"C ki Mn MIA Component: NIA I BearrVi scti;o On Calib-.,irn.vi Ilock Dg. q0 Axial Circ BM: N/A HAZ: N/A iYes / Nn) NO YES NO Crown HT: N/A Weld Width: N/A r'Iflmcf.-or 1, T S3DH
'S-eep9oniliira I 11uth in lnch~*s Amplitude ir % 80%
Gain In dB 59.0 dB Notes: Tho 600 Zone-i ultrasonic examination.
I 5r1-9015478-.000 Section 5 Tab J Page 6 of 10
OW- .
C- '.' %' 7 1 -o -
L U t, A UT CALIBRATION DATA SHEET A - E: vA
- I Customer: Browns Farry Unit 3 Exam Date: 3/7/2005 Calibration No.; N3SB-S2
,j9y~e PV Nozzle N3B R~~oat11 Componeni *D.acription: 26" Main Steam Nozzle to Vessel Weld (Zone-2 I'cxamlnation)
ISO I Drawfng No.: 3.1SI-0329-C Procedure No. I Rev.: N-UT-78 1 3 Material: (;Iad CS Diamater: 26" Nom-le Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Kravrtmeri Model: USN58L Serial No: 03-844 Mfg: RTD Calibration Block No: BF-18 Surial / MT7E 0: 0100D0 Model: TRL2-AUJST Size: 2(24x42) Y/A Thickness (In): 6.12" Diameter. (in): Flat Mat. Crifl. / %yeqocity::).1Z'0 rn/Micro ,Seconds Shape: Rectanga Fraq: 2.0 MHz Temp (F) Block: 82' Temp (F) Comp. 889 irDelay: 14.0C] ps Rarige: 20.0" Config.: Dual Mode. Long Thermometer No.; VH- 9571 Each Miajer Screen Div. #: 2.0 Nominal Angle: 600 Measured: 610 Couplant: Ultragel II Batch No.: 05325 Cai in Depth or Sound P:ath: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full- /av. T "70eect . Cable Typo & Longth: RG-'I74 1 25' Serial No.: NIA 4-
~. jY l~rqq (,i~iz): 2 -25 No. cfConnrictoai: 0
Description:
N/A Fn . Rl.te: Autjo Hi-gh IUAC PLOT Reflectors
-+ ---. - -I Pulse Amp: Nxed I Pulsar: H*gh Sweep Position Reference Sensitivity: 72.0 dO Signal Amp (%)
Scan Fnsilivily: 80.0 dB Gain DB (dB):
Probe Squint Angle 30 Probe Focus: FD -2.70" r'lT71.i Cal.JZJ7106j IlX Intt
'rMit. Simn. ca!: N/A ý N/A N/A 1ý.Intermediate- NIA N/A -
N/A 0 DEGREE WELD THICKNESS ONLY NIA N!A 0 1 2 3 4 5 6 7 B 9 101. Component: N/A I . _______.=~
IIntermadlato: N/A N/A BM: N/A I HAZ: N/A
' Intermedi,_to: I N/A I I N/A Circ Scan Exam Angle Ds=< the inverse sine of CIL Weld: N/A
. .....-- I........ the INominal ID/OD ralio?
ial Cal; 37/06 -15:30 X [YES [I NO 0 NIA Component: N/A Ream .iifectir-i an ýI~it,;'Wriir Clock J Cg..
0 Axial Bic 1m: N/A HAZ: N/A
(---
I NW NO , YES NO Crown HT: N/A Weld Width: NIA
':f,*:fl*-tc1 l,') Notch
- weep Pft~lr.i Depth in Incheti 6.0
.tmplitude in % 80%
Gain in dP 72 Notes: The 60° Zone-2 ultrasonic examination.
Examiner: ~~Cami 7 Examiner: NIA Sign1:~. , 7 Level: 1i1 TE:0 /7R2906 Sign:
--.
jl~vi~III Date: 03 !22/2006 ANignevle:
Sign: J%
I 51 -90'15478}-000 Section 5 Tab J Page 7 of 10
r~I~2c1D~as1LIx- EtMETIMEM ATZ ___________
Cýu Q /? 0
_A_
ARE VA __
RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET
\Site Bmvirns -erry Unit 3 LEX-.m Date: 3/7/06 No.: U3C12-N3B-NV tsmmry Calibration No.: N3B-CSO3 IcZ).e RPV N'35 SComnponent ID):R¶PV NS8E 7
fexam L'escr,[,iori: 26'Mfain Steati n Nozzle to Vessel WaoI S Section XI: 201Edition with 2003 Addenda Dtawing No.: 3-151-0329-C Procedure No. i Rev.: 54-ISI-850 / 03 Figure No.: IWB 2500-7 Meil:CS Clad Thickness: 6.1' Nozzle Diameter: 26' INTUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley______________ Mfg.: KBA Modi2: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: OOX IXJ Cal. Block Thickness: 6.12- Dia.: Flat Seral No.: l~i.3h1 20f-)G031455 Size: -5X1.O" Temp: Block: 83*F Cm.:8F Freq: 2.25 MI-ly T!s'hae: Rectangle Thermometer VII: 9571 Delay: 7.92" Mode: Shear T Config.. Single Couplant Type: Llltragel 11 Velocity .120tin~ipse Nominal Refraco:ed Angle: 60' Couplant Batch #: 05325 Each 3Wijoi C;:,rveri Uiv.: 1-0" 1%1aasuredl Refractoe Anck.- 5 CALIBRATION VERIFICATION BLOCK Freq. 2.25 MHz Pu~se: 222 nas Nominal Skew Angle (If Appficable): 54-74 Serial No.: 037405 Type: Rompas 1:50l0 C
,am Rep. Rate: 2 PKHz Measured Skew ýngle (IfApplicable): 54-74 Reflector:103 F-ilter: Filter .l Reje-ct: Off Wedge Radius (IffApplicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG- 174 Longth:12' Amp. %: 100 40 Mode: ElnDiuol NPulse Echo No. of Intermediate Connectors: 0 Gain clB; 56.8 56.8 jack: &tFrranqtr.t IjROneivo DAD PLOT a
Id~
"I'! ca iy: 152.0dB
"'t, . CALIWPA71"TOt I VERIFiCATIOIN TIMrES Date Time Initials Initial Cal: 13 ./06 1242 1 In1ermedinte: N NA NA (Intermediate: NA NA j NA Intermardiaet.
Ii'rtermedliitAej IN errnrletd a NA NA W,
J NA NA NA NA NA NA lnte~rrnPl'diaf" N NA I NA 0° THICKNESS DATA In~rmd a I j NA N Upper Shell: N/A Lower Shell: N/A
'-rnal Cal. '7 fJIDU 1i ::f- Weld CL: N/A At Indication: N/A Caibration Fe'ctr! Notch Fweep Position 5.6 c
iAmplitude in % FSH 80%
3 lGainin (1B 73.2 dB Notes: Nozzle to Shell 6" delay on screen E;caniinar: WiklW K~Ijlif., Lvl:I Date: 3/7,06 Ex,Wlminer: N/A Level: N/A Date: N/A
~Sign: ", )y" '/ýiI.-"... Sign:
Cohb /,iwd -- Level: ill Date: 3/22,2006 Al-41Revýj~ ~¶.. Date:
Sign:; t~ . ÷ 111"o I $
Fl
____________
5478-0(10 SectIon 5I. Tab J Page ~ of 10 151 -.-PO1 9015478-0 00 Section 5 Tab J Page 8 of 10
_________ ____ C2C .i 1~3 t"At RPV ULTRASON3C CALIBRATION & EXAM DATA SHEET A IR E'V I-l l. oivii:wp; !_nf Unit Vc i n LaDt 370 Surn,-rary No.: U3C12-N3B-NV I Calibration No.: N3B-CS04
zlleI L-'.: :Pi,. N3B Component ID: RPV N3B I
Exam Desciiotion: 26" Main Steam Noz2le to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-!SI-0329-C Procedure No. / Rev.: 34-131-8501 03 Figure No.; IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 26" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfgj.: SavaleY_ Mfg.: KBA _ Model: 3enchmark Cal. Block ID: BF-1t8 Mqodel: Sonic ":36 Serial No.: 010T Fý- Cal. Block Thickness: 6.12" Dia.: Flat
.erial No.: , I200GO8(1455 Size: .5X1.0" Temp: Block: 83'F Comp.: 88°F
.'age: *'(7 Freq: 2.25 MHz hShapw:Rectangle Thermometer VH' 9571 Dei:ty: 833," Mode: Shear Contijg.: Single Couplant Type: Ultragel II Velocity: .129 in/pse.c. Nominal Retracted Angle. 40' Couplant Batch #: 05325
, Eahj, ',rct-nirl*i'.:'1 . Measured fi A.r :.2. CALIBRATION VERIFICATION BLOCK F'req.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Anphcable): 115" + Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 115" Reflector: 7 10 Filter: if-tr 2' Reject: Off Wedge Radius (If Anficrable): 4.75" Sweep Div.: 2 5 Pulse AolI'ftude: Fixed Cable Type: RG-I71t Lenrih:12' Amp. %: 100 100 M(c.de: ElD'; *t Pultse Echo _ No. of Intermediate Connectors: 0 Gain dB: 57.8 57.8
.Jack: E.ý~".;j .heev '*AC 1L.OT ii" R~et. S,;tii. 52.4 d8
- .cn Son'i~imiviiy: 5.4.0 d13 100 CALIEIl-nCN,'f1 I VERIFICATION TIMES 90 D:.l T:,e I Initials 80
't . . . __.
Initial Cal.
.. ______
......
3//0 T ____
241 70 Intermediato: INA j NA NA 60 NA NA- 50 IA NA 40 llnirmenInr-t.'it NA 30 NA NA nSA Int*ermer ate".: NIA NA NA - - - .. - 1 . .
t ln erma"d;-Me. NA NA
-K1/Ko - L _
_NA __r___ _ .... ..
,
0° THICKNESS DATA NA Upper Shell: N/A Lower Shell: N/A I 4C' Final ('-ii .9/7(06 Weld CL: N/A I At Indication: N/A Calibraion R(Asc_.br( *') Notch
.Sweep Position 3.1 Amplitude i 1%, FSH I 80%
Gain in*dl*, 52.4 dB13 Notes: No.zzle to Shell 5" delay on screen Examiner: N/A
, i.=xarmine*: 1,iJk/VW Kl.isjao Si,,: / 'r e.:n I11 Date: 3[7/200f! Sign; Level: N/A Date: N/A tv-ien zd: %*arvlID 2 0 ANLI Review: ') .d.
Sig: ~Level: Ill Date; 3122-i2006 Date:
Sign: P 'i/ _l/oL I1 9 S ci n ~h JP . a e .9 f. .1.
?3'1-90!15476-000 Section 5 Tab J Page 9 of 10
q iJ.!, 1 M J i,.t t V A 7, -
____ ____ ______
C&C> GO A'-L2~3 A RPV ULTIRASONIC CALIBRATION & EXAM DATA SHEET A R E "V",,,
, e, Bron,r ASite: -F,;rry Unit 3 Exam Date: 3/7/06 Sumrmary No.: U3C12-N3B-NV Calibration No.: N3B-CS05 Nozzle.n 0D: RPVV'IBi
- Aomponurit [I: IPV 413B Exam Denctiption: 26" Marn Steam Nozzle to Vessl Weld ASME Section Xl: 2001 Edition with 2003 Addenda
.~Drawing~ No.: 3-IGl-0322.-C Procedure No. / Rev.: 54-ISI-860 /03 Figure No.: IWB 2500-7 Material: CS '-;lad I hickness: 6.1" Nozzle Diameter: 26" iNSTRUMENT SETTINGS SEARCH UNiT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA SMdel: Benchmark Cal. Block ID: BF-18
_ ...... ~
iýMode: Son,:: ]136 Serial No.:-OWJ17 Cal. Block Thickness: 6.12" Dia.: Flat "erial No. 136P1200G081455 Size: .5X1.0" Temp: Block: 83"F Comp.: 88°F Freq: 2.25 MHz [ Snape: Rectangle Thermometer VH: 9571 Delay: 6.2F." Mode: 6 hear Corfig.: Single Couplant Type: Ultragel II Nominal Refracted Angle: 40' Couplant Batch #: 05325 a ,. i ,"2 ::*,ee n Div.: 12' . Meairure.d Rafrc"ci.:d ,naloI : 4?" CALIBRATIONlfVERIFICATION BLOCK II I Freq.: 2.25 MHz{ Pulse: 222 ns Nominal SkewAngle (jl Aippicabto): 115" - Serial No.: 037405 iType: Rompas D irpinpq: 501-0 Rep. Rate: 2 K,4Hz Measured Skew Angle (VApplicable): 115" Reflector: 7 10
- I Fir Filter 2 Reject
- OfCF Wedge Radius (ItApplicabIC); ..7 *" Sweep Div.: 2 5 Pulse rTpltude: Fixed ch Cable Type: RG-174' Ln.gth: 12' 100 90 Mode.: EDii-9 OPulse Echo No. of Intermediate Connectors: (U Gain dB: 50 50 r.
_________________________________
Jack: 7rw.rrit EIReceive DAC PLOT Ret. Se .-itivit.: 53.8 dB S ,ini'i..y: 54.0 dEB
~tii ~'CALI3riTlON IVErI7F71CA1T6N T51MES Date-. n19 -ir Int'"rrn'"diato: NA j NA__j NA -
lnlimc1.A. A PIA NA f r kintnrnediate: NA NA NA Jnternred';at: NA, I NA NA nterrnediate:
I- . .
NA . .
NA
.
NA 0* THICKNESS DATA inalerre dai,: NA NA NA Upper Shell: NIA Lower Shell: N/A 4.......... I * - 0 1 2 :3 4 5 6 7 8 9 IFinae Cal.: Weld CL: NIA At Indication: NIA Calibration k'e'lsctorfs) Notch Sweep Positio 3.1 Ar0plihI19 in % PFSH 80'o
ýGai*n in dS 53.8 dB [
Notes: Noznle to Shell 5" Jelay on screen F> smirwy: 10fli Kleinian. ladI Date: 3,"7!20,06 Exairiner: N/A
,Sign: ~ Level: N/A Date: N/A Siqn:
~,$a~eec SJ~~ntiJ Lval: Ili Date: 3122,'2006 AN II Revie(
Date:~
Sign: __Q_
A Page 1U 0? 'IU t1-9O15478-OC~O 51 -9015478-000 Section 5 Ser:.tion 5 Tab Tab .J,J Page 10 of 10
Weld Examination Report R-085 N4B-N/V Feedwater Nozzle
C& -(1~31 rk-A A
AREVA EXAMINATION
SUMMARY
II I
Summary No.. U3C12-N4B-NV Examination Data Shoot : N4B-DS0l, N4B-DS02 ExmDt:3920 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: BFN3-N4B-NV Examination Procedures: 54-1SI-850-03" N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-18 Section 4 Calibration Sheets No(s):
N48-CSOI N4B-CS04 Examination Category: B-D N4B-CS02 N4B-CS05 N4B-CS03 ISO I Drawing: N4/3-1S1-0327-C Examination Z No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: 5 Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-0 L] Geometric
- SDCN: 30-9015396-00 Summary: / 919146 Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C12.
In accordance with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel surface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
E In accordance with UT Procedure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Feed Water (N4) Nozzle Modeling Parameters Probe Probe Skew Scan Surface 60* Shear _+/-(35 to 67) Vessel 400 Shear +/-120 Blend 39% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K)was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 48.13% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261(296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a W"on each side.
This examination satisfies the requirements of ASME Sec. XI (2001 Edition with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7 (a) exam volume, and was performed using ASME Sec XI, Appendix VIII qualified personnel, procedures, and equipment as amended by the Final Rule.
Prepared By: Wade Holloway LVII Date: 310912005 Reviewed By ým A- C tLV IDate:3.'23/2006 gn: sign:Z I_
Customer: Matt Welch orDae Sign: ~~ANII Review: 66c 51-0147'0g Matt/o SetoWeTbi an f1 51-9015478-000 &-Jrje4 Sectlon5 Tablkt Page I of 10
0 Exam Date / Time: 03109/2006 02:25 Examination Data Sheet No.:N4B-DS01 A UT EXAMINATION DATA SHEET Iso / Drawing: N4l3-ISI-0327-C Calibration Sheet: N4B-CS01, N4B-CS02 AREVA Wo: Nozzle Boss To Blend Radius Exam Angle: 60RL Customer: Browns Ferry Unit 3 System! Component LD.: RPV Nozzle N4B Lo: TDC Procedure No.: N-UT-78-03 Component Descnption: 12 Feedwater Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
= Counter Clockwise RBR = Remaining Back Reflection u COW = Clockwise US = Up Stream 1 W = Depth TWD = Through Wall Dimension ft 1 w D = Downstream Wmax = Dist From CL at Max Amplitude o DS = Half Max Amplitude Wl = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude W2 = Dist From CL at SpecifiedOf LI - L2 = End Point 1&2 (Lateral Movement) D-r (Ba~ckward)
Dac t US DS IND MAXIMUM AMPLITUDE TWD or WIDTH Length Dimensions IND # CW U/ CCW DCW11 DS FORWARD D1 I BACKWARD W2 D2 Ll Lengt Dimension L2 D NO RECORDABLE INDICATIONS None Notes: C-)
- 1. Search unit orientation: radial and circumferential. Circumferential scans performed with + 100 tangential skew. C-:
- 2. Examination Imitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Wade Holoway Level: II Date: 03/09/06 Examiner: N/A Level: Date: Review A. Conti Level: III Date:03/23/06 ANI ew: Date:
6.o _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ _
51-9015478-000 Section 5 Tab M Page 2 of 10
0 Exam Date / Time: 3/9/06 11:10 Examination Data Sheet No: N4B-DS02 A
AR EVA UT EXAMINATION DATA SHEET [so / Drawing: N4/3-ISI-0327-C Calibration Sheet: N49-CS03, N4B-CSDA N4B-CS05 Wo: Nozzle BossTo Blend Radius Exam Angle: 40°S. 60°S Customer: Browns Ferry Unit 3 System / Component I D.: RPV Nozzle N4B Lo: TDC Procedure No.: 54-ISI-850-03 Component
Description:
12 Feedwater Nozzle to Vessel Weld Exam Surface: OD Inner 15%
= Counter aockwise RBR = Remaining Back Reflection CCW = Clockwise US = Up Stream CW = Depth WI Wma TWD = Through Wall Dimension D = Downstream Wmax - Dist From CL at Max Amplitude
'VLj-DS = Half Max Amplitude Wl = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max.
Dac (Forward)
Lmax Amplitude W2 = Dist From CL at Specified % of Li - L2 = End Point 1,2 (Lateral Dac (Backward)
Movement) \
MAXIMUM AMPLITUDE TWD or WIDTH Lg Commentn
INC DI
% D WMax 11men1iD L Length L Max CW / CCW IDAC N RD2 W11 D W2 L D1 L2 D2 NO RECORDABLE INDICATIONS Notes:
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Mike W. KleinJan Level: II Date: 3/9/06 Examiner: N/A Level: Date:
I jpvlew. ~/ 5<-=" Date:
6/ $/06 Page 3 of 10 C w b, Section 5 Tab M 51-9015478-000 Section 5 Tab M Page 3 of 10
S S A RPV Nozzle-To-Shell Weld AR EVA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit: 3 Weld ID: N4B I Date: 03/23/06 1 Summary Ng: U3C12-N4B-NV Axial scans are performed with a procedurefor the examination of vessel shelI welds. This procedure has been demonstrated for detection of flaws located throughout the entire weld thickness.
Coverage obtained during axial scans is typically limited due to nozzle configuration.
In the circumferentialscan direction the outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in the circumferential scan direction a second examination is performed with a procedure demonstratedfor nozzle inside-radius UT. This procedurehas been demonstrated for detection of flaws in the inner 15%-t only. The nozzle inside-radius technique providesadditionalcoverage since the component is modeled and scanning is performed with several search units from the nozzle blend.
Axial Scans CircumferentialScans 100%-t Inner 15%-t Outer 85%4 Examination Procedure: N-UT-78-03 2 Examination Procedure: 54-13S-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 45.019 inches Ulnner 15%-t Examination Volume: 4.66752inchs 'Outer 85%-t Examination Volume: 40.3524rinches.
60°RL axial scan limited: [&Yes []No 'Coverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: Wes No Description of Limitation: Nozzle Blend Radius Inner 15%4 Exam Limited: L]Yes MNo Description of Limitation: Nozzle Blend Radius "Total Axial Volume Achieved: 24.0885z inches Description of Limitation: N/A "Outer 85-t% Volume Achieved: 6.8122Inches
'Inner 15%-t Volume Achieved: 4.66752 inchs ('..
';Percentage of Axial Coverage: 53% *'Total Circumferential Examination Coverage: 25%
B* AAX 100=C (F + H) + A = J CombinedAxial and CircumferentialWeld Coverage LTotal Examination Coverage: 39%
(C+J)+2=L Prepared by: Bret Flesner Date: 03123106 Reviee b dam Conti Date:03/23106 ANII view: Date:
51-9015478-000 Section 5 Tab M Page 4 of 10
0 A RPV Nozzle-To-Shell Weld ARE VA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BPN3 Unit: 3 Weld ID: N4B Date: 03/23106 Summary N: U3C12-N4B-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with k10° skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 39% coverage.
,,-
N4 Nozzle-to-Shell
-Tangential (Circumferential) Scan C2
-Radial (Axial) Scan CA Prepared by: Bret Flesner Date: 03123/06 Reviewed b Conti Date:03123/06 ANI I Review: Date:
'A 51-9015478-000 Section 5 Tab M Page 5 of 10
rt, %.0 -"'3 U .(4 K ARE A VA UT CALIBRATION DATA SHEET AREV U ustomer: Browns Ferry Unit 3 Exam Date: 03/09/2006 I Calibration No.: N43-CSOI System / Component I.D.: RPV Nozzle N4B Component
Description:
12" Feedwater Nozzle to Vessel Weld (Zone-1 Examination)
ISO I Drawing No.: 3-ISI-0327-C Procedure No./ Rev.: N-UT-781 3 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg. Krautkramer I Model: USNS8L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial / MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) /A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal./ Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Tamp (F) Block: 70" Temp (F) Comp.; 83" Delay: 14.000 pS I Range: 8.0 Conlig.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 0.8 Nominal Angle: 600 Measured: 61* Couplant; Ultragal II Batch No.: 05325 Cal In Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length. RG-174 125' Serial No.: NA Damping: 1 K Freq (MHz): 2 - 25 No. of Connectors: 0 Description; NA Rep. Rate: Auto High DAC PLOT Reflectors- NA NA Pulse Amp: Fixed Pulsar: High Sweep Position NA NIA Reference Sensitivity: 59.0 dB 100 - - Signal Amp (%) NA NIA Scan Sensitivity: 75.0 dB .. Gain DB (dB): NA NIA 80-70 - Probe Squint Angle 3° 60 Probe Focus: FD -2.70" CALIBRATION CHECK Date/Time OK Initials 40 "
Initial Cal: 3/9106 02:20 X 1,j // 1 30 Init. Sim. Cal: N/A NIA -
Intermediate: N/A NIA 10-- -
Intermediate: N/A NIA 0 0 DEGREE WELD THICKNESS ONLY Intermediate: N/A NIA 0 1 2 3 4 5 6 7 8 9 10 Component: NIA Intermediate: N/A N/A aM: N/A HAZ. N/A Intermediate: N/A NIA Circ Scan Exam Angle Is =< the inverse sine of C/L Weld: N/A the Nominal IDIOD ratio?
Final Cal; 3/9/06 04:15 X [ YES r NO 0 N/A Component; N/A Beam Direction on Calibration Block 0 Deg. Axial Circ BM: NIA HAZ: N/A (Yes / No) NO YES NO Crown HT: N/A Weld Width: N/A Reflector 1/4T SDHI Sweep Position / Depth in Inches 3.6 Amplitude in % 80%
Gain In dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
I 51-9015478-000 Section 5 Tab M Page 6 oflO0
on a e 7 W'a!5 A UT CALIBRATION DATA SHEET AREVA mu -
a PCustomer: Exam Date: 03/09/2005 I
Browns Ferry Unit 3 I Calibration No.: N4B-CS02 System I Component I.D,: RPV Nozzle N4B Component
Description:
12" Feedwater Nozzle to Vessel Weld (Zone-2 Examination)
ISO/ Drawing No.: 3-ISI-0327-C Procedure No. / Rev.: N-UT-781 3 Material: Clad CS Diameter: 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD M Krautkramer I Model: USN58L Serial NO: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100D0 Model: TRL2-AUST Size: 2(24x42) /,A Thickness 6.12" (in): Flat Diameter.(in):
Mat. Cal. / Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Tamp (F) Block: 70° Temp (F) Comp; 830 Delay: 14.000 pS I Range: 20.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. 8: 2.0 Nominal Angle: 60, Measured: 619 Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter. Full Wave Reject: 0% Cable Type & Length: RG-174 125' Serial No.: NA Damping: 1 K Freq (MHz): 2 -25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors N/A NA Pulse Amp: Fixed I Pulsar: High Sweep Position N/A N/A Reference Sensitivity: 72.0 dB 100 Signal Amp (%) N/A N/A Scan Sensitivity: 80.0 dB 90 Gain DB (dB); N/A N/A 80 -- -
70- Probe Squint Angle 3*
60 Probe Focus: FD -2.70" CALIBRATION CHECK 50 ------
Date/Time OK Initials 40 Initial Cal: 3/9108 02:25 X , 3. . . ..
Init. Sim. Cal: NIA NIA 20 Intermediate: N/A N/A 10 Intermediate: N/A NIA 0 0 DEGREE WELD THICKNESS ONLY Intermediate: NIA N/A 0 1 2 3 4 5 6 7 8 9 10 Component: NIA Intermediate: N/A N/A BM: NIA HA Intermediate: N/A N/A Circ Scan Exam Angle is =< the inverse sine of CIL Weld: NIA the Nominal ID/O0D ratio?
Final Cal: 04:20 X o I3/906 YES [3 NO
- N/A Component: N/A Beam Direction on Calibration Block 0 Deg. Axial Circ BM: N/A HAZ: N/A (Yes I No) NO YES NO Crown HT; NIA Weld Width: N/A Reflector ID NOTCH Sweep Position I Depth in Inches 6.0 I I Amplitude in % 80% i I I Gain in dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Section 5 Tab M Page 7 of 10
C21288 P//,
A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AREVA k9fe: Browns Ferry Unit 3 I Exam Date: 319/06 I Summary No.: U3C12-N4B-NV I Calibration No.-- N4B-CS03 WNozzle ID.: RPV N41 Component ID: RPV N4B I Exam
Description:
12' Feedwater Nozzle to Vessel Weld -FASME Section XI_" 2001 Edition with 2003 Addenda Drawing No.; 3-1*1-0327-C Procedure No. I Rev.: 54-ISI-850 /03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1' Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: O0X1XJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Tamp: Block: 70°F Comp.: 83°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 7.92' Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 n/Isec. Nominal Refracted Angle: 60' Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle: 59' CALIBRATION VERIFICATION BLOCK Freq: 2.25 MHz Pulse. 222 ns Nominal Skew Angle (IfAppliceble): 35-67 Serial No.: 037405 1 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 35-67 Reflector: 10 13 Filter- Filter 2 Reject: 0% Wedge Radius (If Applicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 40 Mode: rlDual ]Pulse Echo No. of Intermediate Connectors: 0 Gain dB: 56.8 56.8 Jack: MTransmit -'Recelve DAC PLOT Ref. Sensitivity: 73.2 dB n
U B
-I can Sensitivity: 76.0 dB 100 "-
i CALIBRATION I VERIFICATION TIMES 90 Date Time Initials 80 . -
Initial Cal: 3/9/06 0835 70.
Intermediate: NA NA NA 80--
Intermediate: NA NA NA 50 -
Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 -
Intermediate: NA NA NA 10 .0 THICKNESS DATA Intermediate: NA NA NA*,*/.. 01 2 34 5 678 910 Upper Shell: N/A Lower Shell: N/A Final Cal.: 3/9/06 1325 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.6 Amplitude in % FSH 80%
Gain in dB 73.2 dB Notes: Nozzle to Shell 6" delay on screen.
Examiner: Mie W Kisinjan Examiner. N/A LSign: ,', '* ý-.." r'*.
'. Level: II Date: 3/9/06 Sign:
Level: N/A Date: N/A U Sviewedg Sign:~Il
- Level: III Date: 3W23/06 ANII Sgn:Review.(//* _ ,4'- ' _*
H- Lii-'
Tab M Page 8 ot 10 51-9015478-000 51-9015478-000 Section 5 Section 5 Tab M Page 8 of 10
pppogsa A RPV ULTRASONIC CALIBRATION. E.XAM DATA SHEET ARE\/A amhSite: Browns Ferry Unit 3 I Exam Date: 319/06 Summary No.: U3cI.hNBNV I
I- aitbratibn No.:N4B-CS04 1 z'Nze ID.: RPV N4B Component ID: RPV N4B I Exam
Description:
12' Feed Water Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-ISI-0327-C Procedure No. / Rev.: 54-ISI-850 103 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5J Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 70'F Comp.: 83°F Range: 10" Freq: 2.25 MHz FShape: Rectangle Thermometer VH: 9571 Delay: 4.52" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 40° Couplant Batch #. 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle: 42' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Applicable): 120"' Serial No.- 037405 1 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (It Applicable): 120" Reflector. 7 10 Filter: Filter 2 Reject: Off Wedge Radius (If Applicable): 3.75" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: [IDual tOPulse Echo No. of Intermediate Connectors: 0 Gain dB: 52.4 52.4 Jack: aTran mit rIfReceive DAC PLOT Ref. Sensitivity: 52.4 dB can SenstIvlty 59.0 dB -
CALIBRATION I VERIFICATION TIMES 90. 5.0 Date Time Initials 80--
Initial Cal: 3/9/06 0830 4L 70" Intermediate: NA NA -k "0 Intermediate: NA NA NA Intermediate: NA NA NA 40..
Intermediate: NA NA NA Intermediate: NA NA NA 20 Intermediate: NA NA NA 10 - 1-4. 0° THICKNESS DATA Intermediate: NA NA NA /*0 1 2 3 4 5 6 7 8 9 10 Upper Shell: N/A Lower Shell: N/A inal Cal.: 3/9106 1320 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.0 Amplitude in % FSH 80%
Gain In dB 62.4 dB Notes: Nozzle to Shell 3" delay on screen Examiner Mij* W KinLevel I Date: 39/0 Examiner: NA Level: Date:
Sign: / K .eeDa30 Sign:
evee:Aani fANII Review(9;,Dt ieviaw~d:A,
- l *1 Level: Ill Date: 3/23106 ign - - Sign: '
51-9015478-000 Section 5 Tab M Page 9 of 10
2)0020o9 A RPV ULTRASONIC CALIBRATION &.EXAM DATA SHEET ARE VA Ad
~.
kSte: browns Ferry Unit 3 U-I Exam Date: 3/9/06 I Summary No.: U3C12-N4B-NV T
ICalibration No.: N4B-CS05 W No.zle ID_: RPV N4B Component ID: RPV N4B Exam
Description:
12" Feed Water Nozzle to Vessel Weld ASME Section Xh: 2001 Edition with 2003 Addenda Drawing No.: 3-ISI-0327-C Procedure No. / Rev.: 54-ISI-850 / 03 Figure No.- IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal Block ID: BF-18 Model: Sonic 136 Serial No.: 0111PP Cal, Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block 70"F Comp.: 83°F Range: 10" Freq: 2.25 MHz T Shape: Rectangle Thermometer VH: 9571 Delay: 4.52- Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 40" Couplant Batch #: 05325 Each Major Screen Div-: 1.0" Measured Refracted Angle : 42' CALIBRATION VERIFICATION BLOCK Freci.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (/f Applicable): 120" - Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (if Applicable): 120' Reflector: 7 10 Filter: Filter 2 Reject: Off Wedge Radius (IfApplicable): 3.75' Sweep Div.: 4 7 Pulse Amplitude: Fixed Cablo Type: RG-174 Length:12' Amp. %: 100 30 Mode: []Dual NPulse Echo No. of Intermediate Connectors: 0 Gain dB: 52.4 52.4 Jack: oTransmit [:]Receive DAC PLOT Ref. Sensitivity: 52.4 d8 -
ýcanSensitivity: 69.0 dB10 CALIBRATION I VERIFICATION TIMES g5--
Date Time Initials 80- -
Initial Cal: 3/9106 0825 7)W Intermediate: NA NA Intermediate: NA NA NA 50 Intermediate: NA NA NA Intermediate: NA NA NA 30 Intermediate:
Intermediate: NA NA I NA Intermediate:
NA NA NA NA INA NA °THICKNESS DATA O'...
Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A Final Cal.: 3/9/06 1318 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.0 Amplitude in % FSH 80%
Gain in dB 52.4dB Notes: Nozzle to Shell 3" delay on screen Examiner: Mik W Kleinjan ,xmieLevel: 11 Date: 3/9/06 Level: Date:
Sign: 6 - Sign:
evie da A on ANII Review/?
Sg Level: Ill Date: 31230 S.
5190548-0 SSto igTan ~aelot1 51-9015478-000 Section 5 Tab M Page 10 of 10
Weld Examination Report R-087 N4C-N/V Feedwater Nozzle
000300 A'-09'7 A EXAMINATION
SUMMARY
4 ARE VA Summary No.: U3C12-N4C-NV Examination Data Sheet : N4C-DS01, N4C-DS02 ExmDt:319/2006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: BFN3-N4C-NV Examination Procedures: 54-1SI-850-03" N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-18 Section 4 Calibration Sheets No(s):
N4C-CS01 N4C-CS04 Examination Category: B-D N4C-CS02 N4C-CS05 N4C-CS03 ISO I Drawing: N43-1SI-0327-C Examination [ No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: EJ Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 [E Geometric
- SDCN: 30-0015396"0 Summary: 1 7-- * - */*4 Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C12.
In accordance with UT Procedure N-UT-78-03, 60° Longitudinal wave examinations were performed from the vessel V urface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
I In accordance with UT Procedure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Feed Water (N4 Nozzle Modeling Parameters Probe Probe Skew Scan Surface 600 Shear +/-(35 to 67) Vessel 400 Shear +/-120 Blend 39% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K)was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 48.13% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a "/2"on each side.
This examination satisfies the requirements of ASME Sec. XI (2001 Edition with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7 (a) exam volume, and was performed using ASME Sec XI, Appendix VIII qualified personnel, procedures, and equipment as amended by the Final Rule.
Prepared By: George Chapman LVII Date: W/09/2006 Reviewed By* ,,iam A. Ebntl LVIII Date:3/23/2006 I
oign: a Sign:
CustomerfaftW~ Dalp Lý Sig 5790546-0
!
'Io.4i#
9eýSeto ANIIlReview:
a 'Pge
~
14 of1 51-9015478-000 Section 5 Tab Oc Page 1 of 10
Exam Date I Time: 03/0812006 15:50 Examination Data Sheet No.:N4C-DS01 A UT EXAMINATION DATA SHEET Iso I Drawing: N413-lSI-0327-C Calibration Sheet: N4C-CS01, N4C-CS02 AREVA Wo. Nozzle Boss To Blend Radius Exam Angle: 6ORL Customer: Browns Ferry Unit 3 System / Component I.D.: RPV Nozzle N4C Lo: TDC Procedure No.: N-UT-78-03 Component Descniption: 12 Feedwater Nozzle to Vessel Weld Exam Surface: OD Zone 1 2 RBR = Remaining Back Reflection bw
= Counter Clockwise CCW = Clockwise US = Up Stream CW = Depth TWD = Through Wall Dimension Q- w I la M Pit D = Downstream Wmax = Dist From CL at Max Amplitude w 2 DS = Halr Max Amplitude Wl = DiMt From CL at Specified % of -
HMA = Dist From Ref Pt at Max. Dac (Forward)
ILmax Amplitude W2 = DistFrom CL at Specifiedof 1- -1L2 = End Point 1&2 (Lateral Dac (Backward) Sci %_
Movement)
US UN DS MAXIMUM AMPLITUDE TWDorWIDTHLengthDimens FORWARD BLength Dimensions CW I CCW DAC jD1 D W Max j%LMax1I W xD2 DL22LD2 W2 L1xD1 NO RECORDABLE INDICATIONS None Notes:
- 1. Search unit orientation: radial and circumferential. Circumferential scans performed with :t 100 tangential skew.
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: George G.Chapman Level: II Date: 03/08106 Examiner: N/A Level: Date: Reviewed: m A. Conti Level: III Date:03/23106 ANfiievi: Date:
7..4 bWae f1 51r-9057-0 Seto 51-9015478-000 Section 5 Tab 0 Page 2 of 10
S Exam Date I Time: 3/9106 09:25 Examination Data Sheet No: N4C-DS02 AEVA UT EXAMINATION DATA SHEET Iso/ Drawing: N413-1SI-0327-C Calibration Sheet: N4C-CS03, N4C-CSD4 N4C-CS05 AR We: Nozzle BossTo Blend Radius Exam Angle: 40'S, 60'S Customer: Browns Ferry Unit 3 System I Component I.D.: RPV Nozzle N4C Lo: TDC Procedure No.: 54-ISI-850-03 Component
Description:
12 Feedwater Nozzle to Vessel Weld Exam Surface: OD Inner 15%
Ct oCow S Counter Clockwise RBR = Remaining Back Reflection L CCW = Clockwise US = Up Stream CW = Depth TWD = Through Wall Dimension W1 w maxP D = Downstream Wmax = Dist From CL at Max Amplitude W2 DS = Half Max Amplitude W1 = Dit From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax L1 - L2 Amplitude
= End Point 1&2 (Lateral W2 = Dist Dac From D2 CL at Specified (Bacward) i %of S Z!1 Movem'ent) (Backward),V US DS MMAXIMUM AMPLITUDE TWD or WIDTH Length Dimensio U_ D_ Length Comments
.4-'-
4 .1~.&~.~
0 Notes: 0 0
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets. 0 Exam ' e V. Kleinjan Level: 11 Date: 3/9/06 Examiner: N/A Level: Date: Reviewsa/dam Conti Level: Ill Date: 3/23/06 ANII Re w Date:
"-4 51-9015478-00 /eto 5 a 0Pge3of1 51-9015478-000 Section 5 Tab 0 Page 3 of 10
S AR EVA A RPV Nozzle-To-Shell Weld Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit: 3 Weld ID: N4C Date: 03/23/06 1Summary NQ: U3C12-N4C-NV Axial scans are performed with a procedure for the examination of vessel shell welds. This procedure has been demonstratedfor detection of flaws locatedthroughout the entire weld thickness.
Coverage obtained during axial scans is typically limited due to nozzle configuration.
In the circumferentialscan direction the outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in the circumferentialscan direction a second examination is performed with a procedure demonstrated for nozzle inside-radiusUT. This procedurehas been demonstratedfor detection of flaws in the inner 15%-t only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanning is performed with several search units from the nozzle blend.
Axial Scans CircumferentialScans 100%-t Inner 15%-t Outer 85%.4 Examination Procedure: N-UT-78-03 Examination Procedure: 54-1SI-850-03 Examination Procedure: N-UT-78-03 0
ARequired Examination Volume: 45.019!inches Inner 15%-t Examination Volume: 4.66752 inchs 7iFuter85%-t Examination Volume: 40.35247Inches.
60°RL axial scan limited: MYes [-]No *Coverage Obtained by Modeling: 100% 60°RL Outer 85%-t Exam Limited: MYes []No Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: L]Yes NNo Description of Limitation: Nozzle Blend Radius uTotal Axial Volume Achieved: 24.0885z inches Description of Limitation: N/A "Outer 85-t% Volume Achieved: 6.812'inches "inner 15%-t Volume Achieved: 4.66752lnchs 0,
'Percentage of Axial Coverage: 53% "lotal Circumferential Examination Coverage: 25%
B+ AX 100= C (F + H) + A = J Combined Axial and CircumferentialWeld Coverage 0 LTotal Examination Coverage: 39% 0 (C+J)+2=L rz Prepared by: Bret Flesner Date: 03/23/06 Revi :wd*damn* 1!_ Date':03/23/06([ ANI view: Date:
Scin, a S Pag 4vof 10 519147-0 51-9015478-000 Section 5 Tab 0 Page 4 of 10
0 00 A RPV Nozzle-To-Shell Weld AR EVA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit 3 Weld ID: N4C Date: 03/23/06 Summary NQ: U3C12-N4C-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with +/-110' skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%-t only. These scans achieved 100%
circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 39% coverage.
L ------------------
N4 Nozzle-to-Shell 0 C0
-Tangential (Circumferential) Scan
-Radial (Axial) Scan j0 C)
Prepared by: Bret Flesner Date: 03/23/06 Reviewed Adam Conti Date:03123106 ANII Review: Date:
ab0 ag 5of1 5190548-00Setin5 51-9015478-000 Section 5 Tab 0 Page 5 of 10
000305 10-0*7 A UT CALIBRATION DATA SHEET AREVA r-9 U *Custonier: Browns Ferry Unit 3 Exam Date: 0310812006 Calibration No.: N4C-CSO1 System I Component I1D.: RPV Nozzle N4C Component
Description:
12 Feeadwater Nozzle to Vessel Weld (Zone-I Examination)
ISO I Drawing No.: 3-11S-0327-C Procedure No. I Rev.: N-UT-7813 Material: Clad CS Diameter. 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: KrautkramrI Model: USN58L Serial No: 03.846 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100DO Model: TRI2-AUST Size: 2(24x42) '/IA Thickness (in): 6.1 Diameter. (in): Flat Mat. Cal. / Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block, 70* Temp (F) Comp.: 53° Delay: 14.000 PS Range: 8.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. 0: 0.8 Nominal Angle: 60* Measured: 610 Couplant; Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: FullWave Reject: 0% Cable Type & Length: RG-174125' Serial No.: NA Damping: I K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
NA Rep. Rate; Auto High DAC PLOT Reflectors E NA NA p ilm Am e. I n, ._
ru*op,, rx"U Iseu r: nign Sweep Position I NA I NIP Reference Sensitivity: 59.0 dB Signal Amp (%) NA N/A Scan Sensitivity: 75.0 dB Gain DB (dB): NA N/A Probe Squint Angle 30 Probe Focus: FD -2.70"
-I.
9 CALIBRATION CHECK Date/Time OK Initials Initial Cal: 3/8106 15:40 X Init. Sim. Cal: N/A NIA Intermediate: N/A N/A Intermediate: N/A N/A 0 DEGREE WELD THICKNESS ONLY 0 1 2 3 4 5 6 7 8 9 10 Intermediate: N/A N/A Component: N/A Intermediate: N/A N/A BM: N/A HAZ: N/A Intermediate: N/A N/A Circ Scan Exam Angle is =< the inverse sine of CIL Weld: N/A Final Cal: 318106 17:40 F XC 3I 1 , the Nominal ID/OD ratio?YES NO H NIA Component: NIA Beam Direction on Calibration Block 0 Deg. I Axial ClrC BM: N/A HAZ: N/A (Yes / No) NO YES NO Crown HT: N/A Weld Width: N/A Reflector 1/4T SDN Sweep Position / Depth in Inches 3.6 Amplitude in % 80%
Gain in dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
I 51-9015478-000 Section 5 Tab 0 Page 6 of 10
00 306 A UT CALIBRATION DATA SHEET AR EVA N PCustomer: Browns Ferry Unit 3 Exam Date: 0310812006 Calibration No.: N4C-CS02 System I Component 1.0.: RPV Nozzle N41C Component
Description:
12" Feedwater Nozzle to Vessel Weld (Zoneo2 Examination)
ISO I Drawing No.: 3-1S1-0327.C Procedure No. I Rev.: N-UT-7813 Material: Clad CS Diameter. 12" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 034848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 010000 Model: TRL2-AUST Size: 2(24x42) !4A Thickness (in): 6.12" Diameter.(in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Tamp (F) Block: 70* Temp (F) Comp: 83*
Delay: 14.000 pS Range: 20.0 Config.: Dual Mods: Long. Thermometer No.: VH- 9571 Each Major Screen Div, #: 2.0 Nominal Angle: 60* Measured: 610 Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-1741 25' Serial No.: NA Damping: 1 K Freq (MHz): 2 - 25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors NIA NA Pulse Amp: Fixed I Pulsar: High Sweep Position N/A NIA Reference Sensitivity: 72.0 dB 100 Signal Amp (%) NIA NIA Scan Sensitivity: 80.0 dB 90 - Gain DB (dB): NIA NIA 70 Probe Squint Angle 30
- Probe Focus: FD -2.70" CALIBRATION CHECK 5D Date/Time OK Initials 40 Initial Cal: 318/06 15:50 X 30D------- --
Init. Sim. Cal: N/A N/A 20-- --.
Intermediate: N/A NIA 10 Intermediate: N/A N/A 0 0 DEGREE WELD THICKNESS ONLY Intermediate: N/A N/A 0 1 2 3 4 5 6 7 8 9-10 Component: NIA N/A NIA - CMponInt B_________ N/
Intermediate: N/A NIA Bm: N/A HAZ: N/A Intermediate: N/A N/A Circ Nominal the Scan Exam 10/O0Angle ratio?Is =< the inverse sine of C/L Weld: N/A Final Cal: 3/8106 17:50 X , , h'e, / rN [I___YES []NO 0 N/A Component:
Cmoet NIA
/
______I Beam Direction on Calibration Block 0 Dog. Axial Circ BM: N/A HAZ: N/A (Yes / No) NO YES NO Crown HT: N/A Weld Width: N/A Reflector ID NOTCH Sweep Position / Depth In Inches 6.0 Amplitude in % 80%
Gain In dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 1I 51-9015478-000 Section 5 Tab 0 Page 7 of 10
000307 RM AREVA A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET a Site: Browns Ferry Unit 3 rNozzle ID.: RPV N4C I Exam Date: 3/9/06 I Summary No.: U3C12-N4C-NV Calibration No.: N4C-CS03 Component ID: RPV N4C Exam
Description:
12" Feedwater Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-1SI-0327-C Procedure No. / Rev.: 54-ISI-850 / 03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA -7Model: Benchmark Cal. Block ID: BF-18 Model. Sonic 136 Serial No.. OOX1XJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Tamp: Block: 70'F Comp.: 83°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 7.92" Mode. Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 60° Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 590 CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (ifApplIcable): 35-67 Serial No. 037405 ype: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (ifApplicable): 35-67 Reflector: 10 13 Filter. Filter 2 Reject: 0% Wedge Radius (if AAplicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 40 Mode: []Dual (@Pulse Echo No. of Intermediate Connectors: 0 Gain dB- 56.8 56.8 Jack: STransmlt []Recelve DAC PLOT Ref. Sensitivity: 73.2 dB J
UI
/
a Sensitivity: 76.0 dB 100 CALIBRATION I VERIFICATION TIMES 90 5.5 Date Time Initials 80 .
Initial Cal: 3/9/06 0835 70 Intermediate: NA NA NA 60 Intermediate: NA NA NA so50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20
' ' t~0 .... ... ...
Intermediate: NA NA NA 0* THICKNESS DATA Intermediate: NA NA NA I 123 4 5. 6 9 10 Upper Shell: N/A Lower Shell: N/A Final Cal.: 319106 1325 0__ .1-.
. 2.....................Weld
- CL: N/A At ndication:N/A Calibration Reflectorls) Notch Sweep Poition 5.6 Amplitude in % FSH 80%
Gain in dB 73.2 dB Notes: Nozzle to Shell 6" delay on screen.
Examiner: Mike W Kleinjan Examiner: N/A k*gn - Sý , Level: II Date: 319106 Level: N/A Date: N/A Sign:
mE: -- -.---. 4 Sign:
Ieviewed:
- AdanA /,.o/ /
- Le/
ae:' III Date: 3/23/06 ANrI Rev"ew:Q
-
11 ,
f f
(
Page ~ at 1U 51-9015418-000 51-9015478-000 Secton 5 Section 5 labTab U O Page 8 of"10
000308 R-097 A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA Amkite: Browns Ferry Unit 3 I Exam Date: 319/06 I Summary No.: U3C12-N4C-NV I Calibration No.:N4C-CS04 Nozzle ID.: RPV N4C Component ID: RPV N4C Exam
Description:
12" Feed Water Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-ISI-0327-C Procedure No. I Rev.: 54-ISI-850 /03 Figure No,: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CAMBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5J Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .SX1.0" Temp: Block: 70"F Comp.: 83°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.52" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 inlpsec. Nominal Refracted Angle: 40' Couplant Batch #: 05325 Each Major Screen Div.: 1.0* Measured Refracted Angle : 42° CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 na Nominal Skew Angle (ff Applicable): 120* + Serial No.: 037405 Type: Rompas Damping: 500 Q Rep. Rate: 2 KHz Measured Skew Angle (IftApptucb): 120" Reflector: 7 10 Filter: Filter 2 Reject: Off Wedge Radius (ifAppilceble): 3.75" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: ODual NPulse Echo No. of Intermediate Connectors: 0 Gain dB: 52.4 52.4 Jack: OTransmit []Receive DAC PLOT Ref. Sensitivity:. 52.4 dB
- can Sensitivity
- 69.0 dB 100-CALIBRATION I VERIFICATION TIMES 90 . 6.0 ..
Date Time Initials 80 Initial Cal: 3/9/06 0830 70 ....
Intermediate: NA NA 60 .
Intermediate: NA NA NA 50 --
Intermediate: NA NA NA 40 Intermediate: NA NA NA 30..
30 ....
Intermediate: NA NA 20----
Intermediate: NA NA NA 10 - THICKNESS DATA 0 . ...... ..... . ... .. I.. .
Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A Final Cal.: 3/9/06 1320 _'1'"... [ Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.0 Amnplltude In % FSH 80%
Gain In dB 52.4 dB Notes: Nozzle to Shell 3" delay on screen Examiner: Mik W Kleinjan Level Examiner- NA LlDt Sign: .Level: 1 Date: 319/06 Sign: Level: Date:
4 eiewed:I~gn ign:
Adam* A.*'!
- Level: III Date; 3t23106 ANII Reew:D Sign: ~ 1 ';'-* ~
Date:
~ /
51-9015478-000 Section 5 Tab 0 Page 9 of 10
n n -109 R EVRPV ULTRASONIC CALIBRATION 8t EXAM DATA SHEET rowns Ferry Unit 3 a~ Exam Date; 3/9/06 Summary No.: U3C12-N4C-NV Calibration No.: N4C-CS05 I "NzleI. RPV N4C Component ID: RPV N4C Exam
Description:
12" Feed Water Nozzle to Vessel Weld -TASME Section XI: 2001 Edition with 2003 Addenda Drawing No.; 3-ISI-0327-C Procedure No. I Rev.: 54-11-050 103 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1' Nozzle Diameter: 12" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg,: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 0111PP Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: ,5X1.0" Temp: Block: 70"F Comp.: 83°F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.52" Mods: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 40' Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 42* CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Aolicabfe): 120" - Serial No.: 037405 Type: Rompas Damping: 500 f2 Rep. Rate: 2 KHz Measured Skew Angle (IfApplicable): 120' Reflector: 7 10 Filter: Filter 2 Reject: Off Wedge Radius (If Applicable): 3.75" Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 30 Mode: ODual IRPulse Echo No. of Intermediate Connectors: 0 Gain dB: 52.4 52-4 Jack: oTransmit []Receive DAC PLOT rRef. Sensitivity: 52.4 dB II can Sensitivity 69.0dB CALIBRATION I VERIFICATION TIMES 100c-90 -
Date Time Initials 80 Iniial Cal: 3/9106 0825 70 -
Intermadiate: NA NA NA 60 Intermediate: NA NA NA so Intermediate: NA NA NA 40 Intermediate: NA NA NA0 NA NA NA 20 Ineredat:
Intermediate: Inemeite NA A NA A NA NA 1 .0 01"TI K E SDATA THICKNESS D T Intermediate: NA1 NA NA 0 1 2 3 4 5 6 7 8 9 10 Upper Shall: N/A Lower Shell: N/A Final Cal.: 3/9/06 1318 [Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.0 Amplitude in % FSH 80%
Gain in dB 52.4dB Notes: Nozzle to Shell 3" delay on screen Examiner: i Kleina Examiner:
Sign: 6:;e MAN. Level: II Date: 3/9/06 Sign: Level: Date:
i q
i eviewed:Level I Date: 3/23/06 ANII Review:
Sign: LSign:
Se*tio.
b lj - Pag 10of1 015478H/ -000 Section 5 Tab 0 Page 10 of 10
Weld Examination Report R-088 N5A-N/V Core Spray Nozzle
000329 fr- 6 g A
AREVA EXAMINATION
SUMMARY
II
!
Summary No.: U3i[S-VEaiainDt Shoot: S-S1 NSA-DS02 Exam Date: 31712006 U3CI2-NA-NVExainaton~ta NA-D01,318/2006 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: BFN-N5A-NV Examination Procedures: 544SI.850.03t N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Section 6 Calibration Sheets No(s):
NSA-CS01 NSA-CS04 Examination Category: B.fD NSA-CS02 NSA-CS05 N5A-CS03 ISO / Drawing: N5A/3-S1I-0331C Examination [ No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: [t Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 E] Geometric
- SDCN: 30-9015396-00 Summary: :ru PE AU*A" 192 ats996.kC t4 ,4 Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C 12.
In accordance with UT Procedure N-UT-78-03, 60* Longitudinal wave examinations were performed from the vessel Er urface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
In accordance with UT Procedure 54-1SI-850-03 and the referenced "VA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Jet Pump Instrumentation (N8) Nozzle Modeling Parameters Probe Probe Skew Scan Surface 350 Shear _+/-68 Blend 60' Shear 30 to 64) Vessel 38% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketches for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K) was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to - 43% volumetric coverage due to nozzle blend radius and insulation support ring interferences.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-2611296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a V/" on each side.
This examination satisfies the requirements of ASME Sec. Xl (2001 Edition with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec Xl. Appendix VIII qualified personnel, procedures, and equipment as amended by the Final Rule.
0 Exam Date / Time: 0310712006 21:00 Examination Data Sheet No.: N5A-DS01 UT EXAMINATION DATA SHEET Iso /Drawing: N5A/3-ISI-0331-C Calibration Sheet: N5A-CS01, N5A-CS02 AREVA Wo: Nozzle Boss To Blend Radius Exam Angle: 6GRL Customer: Browns Ferry Unit 3 System I Component I.D.: RPV Nozzle N5A Lo: TDC Procedure No.: N-UT-78-03 Component
Description:
10 Core Spray Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
= Co ckwise RBR = Remaining Back Reflection Ube CCW = Clockwise us = Up Stream m CW = Depah TWD = Through Wall Dimension W Pit D =DHwnstxeam Wmax = Dist From CLd at Max Amplitudea I __ii__-
DS = Half Max Amplitude WI = Dist From CL at Specified % of
= Dst DiMA From Lmax Amplitude Ref Pt at Max. W2 Dac (Frward)
Dist From CL at Specified %of L1 - L2 = End Point 1&2 (Lateral Movement) Dac (
Dc(akac],r d) ,,
- N
- JCW US IS I CCW
%
DAC MAXIMUM AMPLITUDE D WM L Max W1Ii TWO or WIDTH Ol I W2 D2 LI il Length Dimensions D1 L2 D2 Comments NO RECORDABLE INDICATIONS Notes:
- 1. Search unit orientation: radial and circumferential.
- 2. Examination limitation and ASME Code coverage is provided cn the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Wade Holloway Level: II Date: 03/07/06 Examiner: N/A Level: Date: Reviewed: A A. Conti Le:el: III Date:03/25106 ANIIR w Date:
7- , -0 abR ag12of1 5
51'-7014 8-0
/eto 51-9015478-000 Section 5 Tab R Page 2 of 11
0 Exam Date / Time: 3/08/06 09:00 Examination Data Sheet No.: N5A-DS02 A UT EXAMINATION DATA SHEET Iso/Drawingý N5AJ3-ISI-0331-C Calibration Sheet: N5A-CS03,N5A-CS04 sorawg N5A-CS05 ARE VA Wo: Nozzle Boss To Blend Radius Exam Angle: 350S, 60'S Customer: Browns Ferry Unit 3 System I Component I.D,: RPV Nozzle NSA Lo: TDC Procedure No.: 54-1SI-850-03 Component
Description:
10" Core Spray Nozzle to Vessel Weld Exam Surface: OD Inner 15%
Counter Clockwise
= CoCWterClockwise RBR = Remaining Back Reflection CCW = Clockwise US = Up Stream CW =DDepth TWD = Through Wall Dimension Q__ WI w m Pt D = Downstream Wmax = Dist From CL at Max Amplitude W2 DS = Half Max Amplitude Wi = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Imax Amplitude W2 = Dist From CL at Specified % of Li-12 = End Point 1&2 (Lateral Movement)Dc(Bcwr)' Dac(Backward) -- 1 US MAXIMUM AMPLITUDE TWD or WIDTH L D s US S Length Dimensions D# CW/ICCW CN IDAC D%A C WMxILaxIW1 WLaxmLn2a ID1 IW2 ID2 LT1 Dt 12 ID2 NO RECORDABLE INDICATIONS t '-.9-Notes:
C)
- 1. Search unit orientations: Circumferential and Tangential CD
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner: Mike K Keinjan Level: 11 Date: 3/08/06 Examiner: NIA Level: Date: Reviewed: m A. Conti evel: III Date:03/251O8 ANN II R iDate:
1/ii _ _ _ _ _ _ _ __ _ __ _ _ __ _ _ A__
51-9015478-000 Section 5 Tab R Page 3 of 11
A RPV Nozzle-To-Shell Weld AR EVA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit 3 Weld ID: N5A Date: 03/25/06 Summary N2: U3C1 2-N5A-NV Axial scans are performed with a procedure for the examination of vessel shell welds. This procedure has been demonstrated for detection of flaws located throughoutthe entire weld thickness.
Coverage obtainedduring axial scans is typically limited due to nozzle configuration.
In the circumferential scan direction the outer 85%-t is examined with the same vessel procedure as above and typically limited due to nozzle configuration. To achieve additionalcoverage in 1the circumferentialscan direction a second examination is performed with a proceduredemonstratedfor nozzle inside-radius UT. This procedure has been demonstrated for detection of flaws in the inner 15%-t only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanning is performed with severalsearch units from the nozzle blend.
Axial Scans CircumferentialScans 100%-t Inner 15%-t Outer 85%-t Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 42.85086Zinches Dlnner 15%-t Examination Volume: 4.857432 inchs b7Outer 85%-t Examination Volume: 37.99343'Inches.
60°RL axial scan limited: MYes []No fCoverage Obtained by Modeling: 100% 60=RL Outer 85%-t Exam Limited: [OYes --No Description of Limitation: Nozzle Blend Radius Inner 15%-t Exam Limited: I-Yes DgNo Description of Limitation: Nozzle Blend Radius and Insulation Support Ring 3'l'otal Axial Volume Achieved: 20.773192 inches Description of Limitation: N/A HOuter 85-t% Volume Achieved: 7.11100inches Flnner 15%-t Volume Achieved: 4.857434 inchs CPercentage of Axial Coverage: 48.48% JTotal Circumferential Examination Coverage: 28% 0 0
B+AX100=C (F + H)÷A = J Combined Axial and CircumferentialWeld Coverage "Total Examination Coverage: 38% CA)
(C J) + 2 = L IN)
Prepared by: Bret Flesner Date: 03/25/06 Reviewed :dam Conti Date:03/25/06 ANII view: Date:
I #
(
51-9015478-000 Section 5 Tab R Page 4 of 11
0 A RPV Nozzle-To-Shell Weld AREVAUltrasonic Examination Limitation and Coverage Worksheet Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint.
Radial scans are additionally limited for 22" of the circumference due to an insulation support ring. This limitation was from 3.0" (Wo) to the maximum required Wo (11.55") at the point of worst case scenario (bottom dead center). The worst case limitation value incrementally improves as the scanning progressed around the circumference.
Refer to the N5A Limitation Sketch for additional detail.
60°RL radial and tangential scans were performed from the shell surface.
The tangential scans were performed with +/-100 skew towards the weld and at varying distances from the 30 weld.
Circumferential scans with a second procedure were also performed from the blend radius. This technique has been demonstrated for detection of axial flaws in the inner 15%/4 only. These scans achieved 100%
circumferential coverage of the inner 15%-t. ,.-L 100% of accessible surface was scanned resulting in / N5Nozzle-to-Shell . - .....
38% coverage. - Tangentlal (Circumferential) Scan
-Radial (Axial) Scan
- , Radial Scan in area o fimilation (worst case @ BDC) C=)
Prepared by: Bret Resner Date: 03/25/06 Revie dam Conti Date:03125/06 ANII Review: Date:
-01 00ecion5 Ta, Rag5o 51-9015478-000 Section 5 Tab R Page 5 of 11
000334 N5A Limitation Sketch Total Exam Volume 42.85086 Square inches Obtainable Exam Volume 23.9964816 Square inches (without consideration of insulation ring limitation)
Obtainable Exam Volume 56% % (without consideration of insulation ring limitation)
Al Circumference 60.60 Inches Total Available Circumference 360.00 degrees A3 Circumference 56.00 obtainable volume %
B1 Circumference 22.00 Inches (length of limitation) 12 Circumference 130.69 Degrees of limitation (BI/Al)*A2 Limitation Area B3 Circumference 20.33 obtainable volume % (B2/A2)'A3 94 63% % of limited volume obtained BS/03 B5 12.81 amount of volume obtained (%) in limited area B3 "B4 C1 Circumference 38.60 Inches Al - B1 Unlimited Area C2 Circumference 229.31 degrees A2 - 82 C3 Circumference 36.67 amount of volume (%) obtained in unlimited area A3 - 83 Total Coverage (M) D1 100%t 4M8.% B5 + C3 Total Coverage Sq. Inches 02 100%t 20.773192 D1 *Total Exam Volume 0
51-9015478-000 Sectdon 5 Tab R Page 6 of 11
o0O335, ,f-ogn ql AREVA ustomer: Browns Ferry Unit 3 System I Component I.D,; RPV Nozzle NSA UT CALIBRATION DATA SHEET Exam Date: 03/07/2005 {
Calibration No.: NSA-CS01 Component
Description:
Core Spray Nozzle to Vessel Weld (Zone-1 Examination)
ISO I Drawing No.: N5A13-ISI-0331C Procedure No. I Rev.: N-UT-7813 Material: Clad CS Diameter: 10" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: SBF-18 Serial I MT&E#: 0100DO Model: TRL.2-AUST Size: 2(24x42)/4A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. / Velocity, .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Tamp (F) Block: 83" Temp (F) Comp.: 78° Delay: 14.000 pS I Range: 8.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 0.8 Nominal Angle: 600 Measured: 61° Couplant: Ultragel II I Batch No.: 05325 Cal In Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174 125' Serial No.: NA Damping: 1 K Freq (MHz): 2 .25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amp: Fixed I Pulsar: High Sweep Position I NA I NIIA Reference Sensitivity: 59.0 dB 100 Signal Amp (%) NA N/A go ..... .
Scan Sensitivity: 75.0 dB Gain DB (dB): NA NIA 80 - - .
70 Probe Squint Angle 3*
60 .. . .... Probe Focus: FD -2.70" mE I CALIBRATION CHECK 50 -,
Date/Time OK Initials 40 -... ... .....
Initial Cal: 30 -.-
3107I06 20:45 X I)AI Init. Sim. Cal: N/A N/A 20--------
Intermediate: MIA N/A 10 . .....
Intermediate; N/A NIA 0-------------- 0 DEGREE WELD THICKNESS ONLY Intermediate: 0 1 2 3 4 5 6 7 8 9 10 Component: N/A NIA NIA Intermediate: N/A NIA BM: NIA HAZ: NIA Intermediate: NIA N/A Clrc Scan Exam Angle is =< the inverse sine of CIL Weld: NIA Nominal IDIOD ratio?
Final Cal: 3107106 22:15 X
_ _Ithe A),.bL cQ YES [o NO 0 NIA Component: NIA Beam Direction on Calibration Block 0 Deg. Axial Clrc SM: NIA HAZ: NIA (Yes I No) NO YES NO Crown HT: NIA Weld Width: M/A Reflector 114T SDH Sweep Position i Depth in Inches 3.6 Amplitude in % 80%
Gain in dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
51-9015478-000 Section 5 Tab R Page 7 of 11
000336 A UT CALIBRATION DATA SHEET ARE VA UIpusmer: Browns Ferry Unit 3 Exam Date: 03/07/2006 ICalibration No.: N5A-CS02 System / Component I.D.: RPV Nozzle NSA Component
Description:
Core Spray Nozzle to Vessel Weld (Zone-2 Examination)
ISO I Drawing No.: NSA13-4SI-0331C Procedure No./ Rev.: N-UT-7813 Material: Clad CS Diameter: 10" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer Model: USN58L Serial No: 03-848 Mfg; RTD Calibration Block No; BF-18 Serial I MT&E #: 0100DO Model: TRL2-AUST Size; 2(24x42) A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 83* Temp (F) Camp: 785 Delay: 14.000 p5 Range: 20.0 Conflg.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Dlv. #: 2.0 Nominal Angle: 60* Measured: 61* Couplant: Ultragel II Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type & Length: RG-174125 Serial No.: NA Damping: I K Freq (MHz): 2 .25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors NIA NA Pulse Amp: Fixed I Pulsar High Sweep Position NIA N/A Reference Sensitivity: 72.0 dB 100 Signal Amp (%) NIA NIA Scan Sensitivity: 80.0 d13 90 -..... Gain DB (dB): NIA N/A 80 -....... Probe Squint Angle 3*
60 Probe Focus: FD -2.70" CALIBRATION CHECK 50-Date/Time OK Initials 40-Initial Cal. 3107106 20:40 X 0-,- 3 Init. Sim. Cal: NIA NIA 20 Intermediate: NIA N/A 10..
Intermediate: NWA NIA 0 0 DEGREE WELD THICKNESS ONLY Iremediate: NIA NIA -- 012345 6 7 8 9 10 Component: NIA Intermediate: NIA NIA BM: NIA HAZ: NIA Intermediate: NIA NIA Circ Scan Exam Angle is =< the Inverse sine of C/L Weld: NIA the Nominal IDIOD ratio?
Final Cal: 3107106 22:20 X [3 YES [ NO 0 NIA 01., Component: NIA Beam Direction on Calibration Block 0 Deg. Axial I Circ BM; N/A HAZ: NIA (Yes I No) NO YES I NO Crown HT: N/A Weld Width: NIA Reflector I NOTCH Sweep Position / Depth In Inches 6.0 Amplitude in % 80%
Gain in dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Section 5 Tab R Page 8 of 11
n0033 7
.AREVA IMRPV ULTRASONIC CALIBRATION & EXAM DATA SHEET Ferry Unit 3 S Date: 03/08c06 Summry No.: U3C12-N5A-NV Calibration No.: N5A-CS05 M nExam rowns oz :RPV NSA Component ID: RPV N5A Exam
Description:
10' Core Spray Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-ISI-0331-C Procedure No. / Rev.: 54-ISI-8501/03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6,1" Nozzle Diameter: 10'
' INSTRUMENT SE'T'ING$ SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Mo-del:Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 00X1 XJ Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Tamp: Block: 83°F Comp.: 78°F Range: 10" Freq 2.25 MHz Shape: Rectangle ThermometerVH: 9571 Delay. 7.92" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 60° Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle: 59" CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): NA Serial No.: 037405 Type: Rompas Damping: 500 (2 Rep. Rate: 2 KHz Measured Skew Angle (ff Applicable); NA Reflector: 10 13 Filter: Filter 2 Reject: Off Wedge Radius (ff Applicable): Flat Sweep Div.: 4 7 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 40 Mode: ODual OPulse Echo No. of Intermediate Connectors: 0 Gain dB: 56.8 56.8 Jack: MTransmit EIReceive DAC PLOT Ref. Sensitivity: 73.2 dB canSensitivity: 82.0 dB 100 -
CALIBRATION I VERIFICATION TIMES 90- .. .
Date Time Initials 80 - -- ...
Initial Cal: 03/08/06 08:15 70 - - - - -
Intermediate: NA NA NA 60 Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 2)
Intermediate: NA NA NA 10, . 0* THICKNESS DATA Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A 0 1 2 3 4 5 6 7 8 9 10 Upe~el / oe hl:N/A Final Cal.: 03/08/06 1050 0 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 5.6 Amplitude in % FSH 80%
Gain in dB 73.2 dB Notes: Nozzle to Shell 6" delay on screen.
Exami SIgne: Mik lee Level: II Date: 03/08/06 Sign: Level: N/A Date: N/A eviewed: Ada Co ANII Review:
Sign: Level: III Date: 3/25/2006 Sign:
bi -~U1~34 (~-ULJU Section5Tb ae f1 51-901 5478-00 Secfion 5 Tab R Page 9 of 11
000338 /?-M_
A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA
-
I ite Browns Ferry Unit 3 I Exam Date: 03/08/06 I Summary No.: U3C12-N5A-NV I Calibration No-: N5A-=SO3
-U.
'W Nozzle ID.: RPV N5A Component ID: RPV N5A Exam
Description:
10" Core Spray Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-1SI-0331 -C Procedure No. I Rev.: 54-4SI-850 (03 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 10" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 01BV5J Cal. Block Thickness: 6.12" Dia.: Flat Serial No-: 136P1200G081455 Size: .5X1.O" Temp: Block: 83"F Comp.: 78*F Range: 10" Freq: 2.25 MHz Shape; Rectangle Thermometer VH: 9571 Delay: 4.37" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity:. 129 in/isec. Nominal Refracted Angle: 35° Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 37" CALIBRATION VERIFICATION BLOCK Freq.. 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): 68*+ Serial No.: 037405 Type: Rompas Damping: 500 Q Rep. Rate: 2 KHz Measured Skew Angle (If Applicable): 680 Reflector: 4 7 Filter: Filter 2 Reject: Off Wedge Radius (IffApplicable); 3.25" Sweep Div.: 1 1 4_
Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 50 Mode: [Dual SPulse Echo No. of Intermediate Connectors: 0 Gain dB: 51.8 51.8 Jack: oTransmit []Receive DAC PLOT Ref. Sensitivity:. 63.6 dB m
U-U ca Setiivity:67.0 d5 100 - I CALIBRATION I VERIFICATION TIMES go-4.8 90 Date Time Initials 80--
Initial Cal: 03/08/06 08:20 . , 70 - -.....
Intermediate: NA NA NA 60 nr i NA NA_ NA I __________50.
Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30...
Intermediate: NA NA NA 20-Intermediate: NA NA NA 10 . "0° THICKNESS DATA Intermediate: NA NA2 3 4 6 7 8 9 10 UpperShell: NIA LowerShell: N/A Final Cal.: 0306 10:45 0.. 23-.56----a.- .1 Weld CL: N/A At Indication: N/A Calibration Reflector(s) Notch Sweep Position 4.8 Amplitude in % FSH 80%
Gain in dB 63.6 dB Notes: Nozzle to Shell 3" delay on screen. Metal path for notch response equates to - full cal block thickness (including cladding).
Examiner. Mikf Kieinjan Examiner N/A Date: N/A Level: II Date: 03108/06 Level: N/A
,Sign: Z l 01 -- '-- - Sign:
m iF 4 1 -
q !viewed: A sign:
C nt)4 Level: III Date: 3/25/2006 ANIIReview: C. ~D te~
_____________________ C.. -" -~- -- I---
I-'age iu or it 51901 5478-000 51-9015478-000 Section 55 Tab SectIon Tab RR Page 1u of I I
000339 e,9g AR EVA A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET a hSite: Browns Ferry Unit 3 I Exam Date: 03/08/06 I Summary No.: U3C12-N5A-NV I Calibration No-: N5A-CS04
'Nozzle, ID.: RPV N5A Component ID: RPV N5A Exam
Description:
10" Core Spray Nozzle to Vessel Weld ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-ISI-0331-C Procedure No. I Rev.: 54-4SI-850 103 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 10" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.: Staveley Mfg.: KBA Model: Benchmark Cal. Block ID: BF-18 Model: Sonic 136 Serial No.: 0111PP Cal. Block Thickness: 6.12" Dia.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: 83"F Comp.: 78'F Range: 10' Fraq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay: 4.37" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/psec. Nominal Refracted Angle: 35" Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 37' CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (If Applicable): 68°- Serial No.: 037405 Type: Rompas Damping: 500 0 Rep. Rate: 2 KHz Measured Skew Angle (ifApplicable): 68' Reflector 4 7 Fitter: Filter 2 Reject: Off Wedge Radius (iftApoitcabwe): 3.25" Sweep Div.: 1 4 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 50 Mode: []Dual ;Pulse Echo No. of Intermediate Connectors: 0 Gain dB: 51.8 51.8 Jack: CDTransmit Q-Receive DAC PLOT Ref. Sensitivity: 61.4 dB e can Sensitivity: 67.0 dB 100-CALIBRATION I VERIFICATION TIMES 90 1
Date Time Initials 80 Initial Cal: 03/08/06 08:18 70 Intermediate: NA NA NAl" 60-Intermediate: NA NA NA 50 Intermediate: NA NA NA 40 Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 Intermediate: NA NA NA 10 0" THICKNESS DATA 0 . ... .. . . .. . . . . ... . ... . ... . .I I III ll Intermediate: NA NA NA Upper Shell: NIA Lower Shell: N/A 0 1234 5 6 7 8 9 10 Final Cal.: 03/08/06 10:47 Weld CL: N/A i Ati Indication: N/A I # 1 Calibration Reflector(s) Notch Sweep Position 4.8 Amplitude In % FSH 80%
Gain in dB 61.4 dB Notes: Nozzle to Shell 3" delay on screen. Metal path for notch response equates to - full cal block thickness (including cladding).
Examiner.4i~e Kleinj'an DExaminer N/A Level: N/A Date: N/A Level: II Date: 03/08/06 Sign:
m Si Z &
9 Seviewed:
Sign: Ad "k. Coi Level: III Date: 3/25(2006 NIIReview: ate:,
I I :
51-9015478-000 Secton 5 Tab R Page 11 of 11
Weld Examination Report R-089 N8A-N/V RECIRC Instrument Nozzle
000340 K-9 A
SAREVA EXAMINATION
SUMMARY
I I
-
Exam Date: 3/1112006 SumayNo;U3Cl2-NAN xmnainDt hoot; N8A-DS01, NOA-0802 Customer: Browns Ferry Unit 3 U3C12 Examination Methods: Ultrasonic System I Component ID: BFN-NSA-NV Examination Procedures: 54-1S1-850-03* N-UT-78-03 Component
Description:
Nozzle to Vessel Weld Modeling Number: IR-2003-19 Section 7 Calibration Sheets No(s):
N8A-CS01 Examination Category: B-D NSA-CS02 N8A-CS03 ISO I Drawing: N8/3-1SI-0411-C Examination [ No Reportable Indications Results:
Framatome ANP Safety Document Change Notices: 5 Reportable Indications
- SDCN: 30-5037583-00 *SDCN:30-9011321-00 Geometric
- SDCN: 30-9015396-00 Summary:l r 7t/h 'EnRwere pefom d 7 975251e 4/a
- weldduingBrw&
Manual ultrasonic examinations were performed on the referenced weld during Browns Ferry Unit 3 U3C1 2.
In accordance with UT Procedure N-UT-78-03, 600 Longitudinal wave examinations were performed from the vessel Surface in both the radial and circumferential scan directions. These examinations resulted in no reportable indications.
4 In accordance with UT Procedure 54-ISI-850-03 and the referenced TVA/EPRI modeling the following additional examinations were performed. These examinations also resulted in no reportable indications.
Jet Pump Instrumentation (N8) Nozzle Modeling Parameters Probe I Probe Skew I Scan Surface 500 Shear +/-:(15 to 45) Vessel 64% coverage of the required examination volume was obtained.
Note: Refer to the nozzle coverage sketch for a description of the scanning volume, examination coverage and scan limitations.
Note 1: This ultrasonic examination was performed in accordance with the criteria of 10CFR 50.55a (b) (2) (xv) (G) and the minimum coverage requirements of 10CFR 50.55a (b) (2) (xv) (K) was achieved to the maximum extent possible. Radial examinations of the outer 85%t were limited to 69.92% volumetric coverage due to nozzle blend radius interference.
Note 2: See TVA Request for Relief PDI-1 and PDI-2. Dockets No. 50-261/296; 50-327/328; and 50-0390. This relief request changed the area to be examined per IWB-2500-7 (a) and (b) to the weld plus a /" on each side.
This examination satisfies the requirements of ASME Sec. XI (2001 Edition with 2003 Addenda), Category B-D, for item number B3.90, figure number IWB 2500-7(a) exam volume, and was performed using ASME Sec XI, Appendix ViII qualified personnel, procedures, and equipment as amended by the Final Rule.
a m ign: 14'ýZ.
Prepared By: Wade Holloway Date: 3/11/2006 Reviewed By.
Sign: .
A. Co_ LVI Date:3J25/2006 m
i 1customner: Matt Welch 7 Date-I Sign: ;0 'h aý 5 V?14ý I I ANII Review:
ml w-. E E I I 6/61"f Page 1 of 8 ,,
Secton 5 Tab S 51-9015478-000 Secton 5 Tab S Page 1 of 8
Exam Date I Time: 0311112006 19:55 Examination Data Sheet No.: N8A-DS01 A UT EXAMINATION DATA SHEET Isol Drawing: N813-ISI-0411-C Calibration Sheet: N8A-CS01, N8A-CS02 AREVA Wo: Nozzle Boss To Blend Radius Exam Angle: 6ORL Customer: Browns Ferry Unit 3 System / Component I.D.: RPV Nozzle N8A Lo: TDC Procedure No.: N-UT-78-03 Component
Description:
4 Jet Pump Instrumentation Nozzle to Vessel Weld Exam Surface: OD Zone 1 2
=Counter Clockwise RSR = Remaining Back Reflection UW CCW = Clockwise us = Up Stream CW = Depth TWD = Through Wall Dimension W1 w ma, DS = Downstraxmpltd Wmax = Dist From CL. at Max Amplitude W DS Haf Mx A~liudeW1 = Diet From CL at Specified % ofr HMA = Dist Fromr Ref Pt at Max.Da(Frrd Lmx ApiueW2 = Dist From CL at Specified % ofa LI -1L2 =End Point 1&2 (Lateral Dec (Backward)
Movement)
U MAXIMUM AMPLITUDE TWD or WIDTH USNDI FORWARD BACKWARD LenghmDmenion
Ci)
- 1. Search unit orientation: radial and circumferential.
- 2. Examination limitation and ASME Code coverage is provided on the Ultrasonic Examination Limitation and Coverage Worksheets.
Examiner. Wade Holloway Level: II Date: 03/11106 Examiner: N/A Level: Date: RaemAConti Level: III Date:03125/06 W:2 ANII Re Date:
ts /'~ _ _ __ _ __ _ __ _ __ _ _ _ __ _ __ _ __ _ __ _
51-9015478-000 Secton 5 Tab S Page 2 of 8
Exam Date / lime: 3/11106 20:25 Examination Data Sheet No.: N8A-DS02 A UT EXAMINATION DATA SHEET Iso; Drawing: N8/3-1SI-041 1-C Calibration Sheet: N8A-CS03 AREVA Wo: Nozzle Boss To Blend Radius Exam Angle: 50° S Customer: Browns Ferry Unit 3 System I Component I.D.: RPV Nozzle N8A Lo: TDC Procedure No.: 54-ISI-850-03 Component
Description:
4 Jet Pump Instrumentation Nozzle to Vessel Weld Exam Surface: OD Inner 15%
= Counter Clockwise RBR = Remaining Back Reflection CCW = Clockwise us = Up Stream CW = Depth TWD = Through Wall Dimension D = Downstream Wmax = Dist From CL at Max Amplitude 1Wm DS = Half Max Amplitude W1 = Dist From CL at Specified % of HMA = Dist From Ref Pt at Max. Dac (Forward)
Lmax Amplitude W2 = Dlst From CL at Specified %of L1 - 12 = End Point 1&2 (Lateral Dec (Backward)
Movement) \ J2~
IND f MAXIMUM AMLPUTUDE FORMax TWD or WIDTH BACKWARD Comments ICW/ CCW WAC Wl DI W 2 L1 1 L2 D2 NO RECORDABLE INDICATIONS C
C C=
- 1. Search unit orientations: Tangential
- 2. Examination limitations and ASME Code coverage is provided on the Ultrasonic Examination Umitation and Coverage Worksheets.
Examiner: Thomas Brown Level: 11 Date: 311106 1 Examiner: N/A Level: Date: A. Conti Level: Ill Date LRe- °(,Dt
//4 Date:
_ _ __ __ _ __ _ _ _ _ _ _ _ _ i 51-9015478-000 Secton 5 Tab S Page 3 of 8
0 A RPV Nozzle-To-Shell Weld AR EVA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit 3 Weld ID: N8A I Date: 03/25/06 1Summary N2: U3C12-NBA-NV Axial scans are performed with a procedure for the examination of vessel shell welds. This procedure has been demonstratedfor detection of flaws located throughout the entire weld thickness.
Coverage obtained during axial scans istypically limited due to nozzle configuration.
In the circumferentialscan direction the outer 85%-t is examined with the same vessel procedureas above and typically limited due to nozzle configuration. To achieve additionalcoverage in
.the circumferentialscan directiona second examination is performed with a proceduredemonstratedfor nozzle inside-radius UT. This procedure has been demonstratedfor detection of flaws in the inner 15%-t only. The nozzle inside-radius technique provides additionalcoverage since the component is modeled and scanningis performed with severalsearch units from the nozzle blend.
Axial Scans CircumferentialScans 100%-t Inner 15%-t Outer 85%-t Examination Procedure: N-UT-78-03 Examination Procedure: 54-ISI-850-03 Examination Procedure: N-UT-78-03 ARequired Examination Volume: 16.6052inches 'lnner 15%-t Examination Volume: 2.2262inchs 'ROuter 85%-t Examination Volume: 14.3785Wlnches.
t 60=RL axial scan limited: SYes "]No Coverage Obtained by Modeling: 100% 60°RL Outer 85%-4 Exam Limited: 0Yes I-INo Description of ULmitation: Nozzle Blend Radius Inner 15%-t Exam Limited: --Yes MNo Description of Limitation: Nozzle Blend Radius "Total Axial Volume Achieved: 12.22132 inches Description of Limitation: N/A "Outer 85-t% Volume Achieved: 6.8265Zinches
'Inner 15%-t Volume Achieved: 2.2262 inchs aC
'Percentage of Axial Coverage: 73% 'Total Circumferential Examination Coverage: 54%
B+ AX100= C (F + H) + A =J a C0 Combined Axial and CircumferentialWeld Coverage LTotal Examination Coverage: 64%
(C+ J)+2=L Prepared by: Bret Flesner Date: 03/25106 Reviewed by: Conti Date:03(25/06 ANII Review: Date:
ZI42CSA11oA __
51-9015478-000 Secton 5 Tab S Page 4 of 8
0 S A RPV Nozzle-To-Shell Weld ARE VA Ultrasonic Examination Limitation and Coverage Worksheet Utility: TVA Plant: BFN3 Unit: 3 Weld ID: N8A Date: 03125/06 Summary NQ: U3C12-N8A-NV Tangential and radial scans are limited due to liftoff caused by the blend radius and transducer footprint. N8 Nozzle to Shell 60°RL radial and tangential scans were performed from the shell surface. -Tangential
,,-Radial (Circumferential)
(Axial) Scan Scan The tangential scans were performed with *10* skew towards the weld and at varying distances from the weld.
Circumferential scans with a second procedure were also performed from the vessel shell at various skews. This technique has been demonstrated for detection of axial flaws in the inner 150/6-t only.
These scans achieved 100% circumferential coverage of the inner 15%-t.
100% of accessible surface was scanned resulting in 64% coverage.
I0 IL ----- ---
Prepared by: Bret Flesner Date: 03/25/06 Reviewedvb Adam Conti Date:03/25,06 ANII Review: Date:
51-9015478-000 Secton 5 Tab S Page 5 of 8
000345 /.?-Dgfq AREVA A UT CALIBRATION DATA SHEET I ustomer: Browns Ferry Unit 3 System I Component LD.: RPV Nozzle NSA Exam Date: 0311112006 Calibration No.: N8A-CS01 Component
Description:
Jet Pump Instrumentation Nozzle to Vessel Weld (Zone-1 Examination) 130 / Drawing No.: 3-1S1-0411 -C Procedure No. I Rev.; N.UT-7813 Material: Clad CS Diameter: 4" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CAUBRATION STANDARD Mfg: Krautkramer Model: USN58L Serial No; 03445 Mfg: RTD Calibration Block No: BF-18 Serial / MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) '/IA Thickness (in): 6.1 E Diameter, (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Tamp (F) Block: 811 Tamp (F) Comp.: 71° Delay: 14.000 pS Range: 8.0 Config.; Dual Mode: Long. Thermometer No.: VH. 9571 Each Major Screen Div. #: 0.8 Nominal Angle: 60° Measured: 61- Couplant: Ultragel II Batch No.: 05325 Cal In Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter; Full Wave Reject: 0% Cable Type & Length: RG-174 /25' Serial No.: NA Damping: I K Frsq (MHz): 2 - 25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors NA NA Pulse Amp: Fixed Pulsar: High Sweep Position NA N/A Reference Sensitivity: 59.0 dB 100- Signal Amp (%) NA N/A Scan Sensitivity: 75.0 dB Gain DB (dB): NA NIA 80 70 ..... .
Probe Squint Angle 3*
60 Probe Focus: FD -2.70"
-U.
ICALIBRATION CHECK Date/Time OK I Initials 40 30 50 -T -
Initial Cal: 311110619:45 X /.Iw - -
Init. Sim. Cal: N/A N/A 20 Intermediate: NIA NIA 10 -
Intermediate: N/A NIA 0 1 25, 0 DEGREE WELD THICKNESS ONLY 0 1 2 3 4 5 6 7 8 9 10 II-Intermediate: NIA NIA Component: NIA Intermediate: N/A NIA BM: N/A HAZ: N/A Intermediate: NIA NIA Circ Scan Exam Angle Is =c the Inverse sine of CIL Weld: NIA Final Cal: 311110621:o03 X VA/ the Nominal ID/OD ratio?
[I YES NO I@NIA Component: NIA Beam Direction on Calibration Block 0 Deg. Axial Ciro BM: NIA HAZ: N/A (Yes I No) NO YES NO Crown HT: N/A Weld Width: NIA Reflector 114T SOH Sweep Position I Depth in Inches 3.6 Amplitude In % 80%
Gain In dB 59.0 dB Notes: The 600 Zone-1 ultrasonic examination.
I 51-9015478-000 Secton 5 Tab S Page 6 of 8
000346 12-00 A
ARE VA UT CALIBRATION DATA SHEET AREVA U ustomor: Browns Ferry Unit 3 Exam Date: 0311112006 Calibration No.: NSA-CS02 System I Component I.D.: RPV Nozzle N8A Component
Description:
Jet Pump Instrumentation Nozzle to Vessel Weld (Zone-2 Examination)
ISO I Drawing No.: 3-4SI-0411-C Procedure No. I Rev.: N-UT-7813 Material; Clad CS Diameter: 4" Nozzle Thickness: 6.1" Nominal INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg: Krautkramer I Model: USN58L Serial No: 03-848 Mfg: RTD Calibration Block No: BF-18 Serial I MT&E #: 0100DO Model: TRL2-AUST Size: 2(24x42) /A Thickness (in): 6.12" Diameter. (in): Flat Mat. Cal. I Velocity: .2320 In/Micro Seconds Shape: Rectangle Freq: 2.0 MHz Temp (F) Block: 811 Tamp (F) Camp. 78° Delay: 14.000 VS Range: 20.0 Config.: Dual Mode: Long. Thermometer No.: VH- 9571 Each Major Screen Div. #: 2.0 Nominal Angle: 600 Measured: 610 Couplant; Ultragel II 1 Batch No.: 05325 Cal in Depth or Sound Path: Sound Path Fixture I Size: Integral CALIBRATION STANDARD SIMULATOR Filter: Full Wave Reject: 0% Cable Type A Length: RG-174 125' Serial No.: NA Damping: I K Freq (MHz): 2 .25 No. of Connectors: 0
Description:
NA Rep. Rate: Auto High DAC PLOT Reflectors N/A NA Pulse Amp: Fixed I Pulsar: High Sweep Position N/A N/A Reference Sensitivity: 72.0 dB 100- Signal Amp (%) N/A N/A Scan Sensitivity: 80.0 dB 9o Gain DB (dB): N/A NIA 80------------ -
70 Probe Squint Angle 3*
60 Probe Focus: FD -2.70" CALIBRATION CHEICK -
Date/Time OK Initials 40 Initial Cal: 3111106 19:40 X 30 Init. Sim. Cal; NIA NIA 20 Intermediate: NIA N/A 10 Intermediate: NIA N/A 0 DEGREE WELD THICKNESS ONLY Intermediate: N/A NIA 0 1 2 3 4 5 6 7 8 9 10 Component: N/A Intermediate: NIA N/A BM: NIA HAZ: NIA Intermediate: N/A NIA Circ Scan Exam Angle is =< the inverse sine of CIL Weld: NIA
- the Nominal ID/OD ratio?
Final Cal: 3111/06 21:05 X , YES O NO ONIA Component: N/A Beam Direction on Calibration Block 0 Dog. Axial Circ BM: NIA HAZ: N/A (Yes / No) NO YES NO Crown HIT: NIA Weld Width: N/A Reflector Ib NOTCH Sweep Position I Depth in Inches 6.0 Amplitude in % 80%
Gain In dB 72.0 dB Notes: The 600 Zone-2 ultrasonic examination.
I 51-9015478-000 Secton 5 Tab S Page 7 of 8 ý
000347 /2-ov A RPV ULTRASONIC CALIBRATION & EXAM DATA SHEET AR EVA it: Browns Ferry Unit 3 Exam Date: 03/11/106 Summary No.: U3C12.NBA-NV Calibration No.: N8A-C503 0ZZl D.: RPV N8A Component ID: RPV N8A Exam
Description:
4" Jet Pump Instrumentation Nozzle to Vessel Weld j ASME Section XI: 2001 Edition with 2003 Addenda Drawing No.: 3-lSI-0411-C Procedure No. / Rev.: 54-lSI-850 103 Figure No.: IWB 2500-7 Material: CS Clad Thickness: 6.1" Nozzle Diameter: 4" INSTRUMENT SETTINGS SEARCH UNIT CALIBRATION STANDARD Mfg.. Staveley MFg.: KBAM Model: Benchmark Cal. Block ID.BF-1 8 Model: Sonic 136 Serial No.: 00XIXJ Cal. Block Thickness: 6.12" Die.: Flat Serial No.: 136P1200G081455 Size: .5X1.0" Temp: Block: B1°F Comp.: 78"F Range: 10" Freq: 2.25 MHz Shape: Rectangle Thermometer VH: 9571 Delay. 6.77" Mode: Shear Config.: Single Couplant Type: Ultragel II Velocity: .129 in/isec. Nominal Refracted Angle: 50" Couplant Batch #: 05325 Each Major Screen Div.: 1.0" Measured Refracted Angle : 50° CALIBRATION VERIFICATION BLOCK Freq.: 2.25 MHz Pulse: 222 ns Nominal Skew Angle (IfApplicable): 15"-45' Serial No.: 037405 Type: Rompas Damping: 500 Rep. Rate: 2 K1Hz Measured Skew Angle (ifApplicable): NA Reflector: 7 10 Filter: Filter 2 Reject: Off Wedge Radius (IfApplicable): Flat Sweep Div.: 1 4 Pulse Amplitude: Fixed Cable Type: RG-174 Length:12' Amp. %: 100 70 Mode: [Dual OPulse Echo No. of Intermediate Connectors: 0 Gain dB: 44.8 44.8 Jack: oTransmit []Recelve DAC PLOT Ref. Sensitivity: 61.6 dB can Sensitivity: 70.0 dB 100 -
CAUBRATION / VERIFICATION TIMES 903.4 Date Time Initial/s 80 .
Initial Cal: 03/11106 1942 r 70 Intermediate: NA NA NA 60....
Intermediate: NA NA NA 5.
Intermediate: NA NA NA 40 -.
Intermediate: NA NA NA 30 Intermediate: NA NA NA 20 Intermediate: NA NA NA 10 0 THICKNESS DATA Intermediate: NA NA NA Upper Shell: N/A Lower Shell: N/A 0 1 2 3 4 5 6 7 8 9 10 Final Cal.: 03/111/06 2101 .. ~-Weld CL: N/A At InIdication: N/A Calibration Reflector(s) Notch Sweep Position 3.4 Amplitude in % FSH 80%
Gain in dB 61.6 dB Notes: Nozzle to Shell 6" delay on screen Examiner: Tho-as Brown Level: II Date: 03/11/06 Examiner: N/A Level: N/A Date: N/A Sign: - Sign:
eviewed: Aarj XnfieellI ae:32520 ANII Review: ~$ , ~Date:
Sign: Level:l1 Date:3125/2006 Sign: oW0 6 "1-05.7-0 S"t Tab ANI ew /rrae .o .
51-9015478-000 Secton 5 Tab S Page 6 of 8