ML21351A238

Trp 148.1 St. Lucie SLRA - Breakout Questions for TLAA Section 4.7.1 Rev. 1

ML21351A238
Person / Time
Site:	Saint Lucie
Issue date:	12/17/2021
From:	Office of Nuclear Reactor Regulation
To:
Rodriguez-Luccioni H
References
EPID L-2021-SLR-0002
Download: ML21351A238 (4)

Text

St. Lucie Units 1 and 2 SLRA TRP 148.1 Breakout Audit Questions

Technical Reviewer Eric Reichelt 12/08/2021 Technical Branch Chief Matt Mitchell 12/13/2021

TLAA Section 4.7.1 Leak-Before-Break of Reactor Coolant System Piping

1. SLRA SLRA Page Question / Issue Why are we asking? Outcome of Section Discussion

1. 4.7.1 963/964 In the Time Limited Aging Analysis (TLAA), it SRP 3.6.3 of NUREG -0800 states that Alloy 82/182 welds are susceptible states that PWSC C is considered to primary water stress corrosion cracking an active degradation mechanism

( PWSCC ) and have been conservatively in Alloy 600/82/182 materials in evaluated to consider the effects of PWSCC. PWRs and needs to be Please provide additional information to addressed.

specifically describe what evaluations were made to the Alloy 82/182 welds that are present at the Port St. Lucie ( PSL) Unit 1 and 2 reactor coolant pump ( RCP ) suction and discharge nozzles. Please identify how the applicant is demonstrating that PWSCC is not a potential source of pipe rupture as required in Standard Review Plan ( SRP) 3.6.3 Revision 1.

2. 4.7.1 N/A Considering the evaluations made to the Alloy SRP 3.6.3 of NUREG -0800 82/182 welds by PSL as described above, is states that PWSCC is considered PSL considering an overlay of Alloy 52/152 to an active degradation mechanism minimize the susceptibility to PWSCC? How in Alloy 600/82/182 materials in is PSL planning to monitor these welds for pressurized water reactors potential leakage? ( PWRs) and needs to be addressed.

3. 4.7. 1 963 In the TLAA, it states that the fatigue crack Fatigue crack growth analysis is growth flaw analysis originally included in based on transient cycles. As a CEN-367-A used generic design basis method for managing possible transient cycles that enveloped the projected fatigue flaw growth, a monitoring

80 year transient cycles for PSL Units 1 and 2 program may be an acceptable to calculate the crack growth. Does PSL have alternative.

a monitoring program that provides an acceptable method for managing the fatigue flaw growth aspect of the Leak Before Break (LBB) evaluation for the subsequent period of extended operation (SPEO)?

4. 4.7.1 963 In the TLAA Evaluation, it states the fracture Fracture toughness correlations toughness correlations from NUREG/CR-4513 need to be to the correct version were used for the full aged condition and are of NUREG-4513 Rev. 2 with applicable for plants operating at 15 effective errata.

full power years (EFPY) for the A351-CF8M materials. Please expand to state if Rev. 1 or Rev. 2 of NUREG/CR-4513 was used for the fracture toughness correlations. In addition, at the time of the correlations, was PSL aware of the errata for Rev. 2 of NUREG-4513 which had a recurring typographical error (the symbol ) was found in the document instead of the symbol. The errata corrected the symbols from 15 EFPY to read 15 EFPY for CF8M materials (refer to ML16145A082).

Please review the fracture toughness correlations used for the fully aged condition for plant operation based on the revised errata.