Revision as of 10:21, 6 July 2018

Text

Rev 0 to Inservice Insp Second 10-yr Summary Program.
	ML17308A183
Person / Time
Site:	Saint Lucie
Issue date:	09/02/1987
From:	ANDERSON E L; FLORIDA POWER & LIGHT CO.
To:	;
Shared Package
ML17221A373	List: ML17221A372; ML17308A183;
References
	MCI-PSL-100, NUDOCS 8709090272
	Download: ML17308A183 (262)
	v • d • e

INSERVICE INSPECTION SECOND TEN YEAR

SUMMARY

.PROGRAM DOCUMENT NO.MCI-PSL-100 REVISION NO.0 DATE: 9/01/87'REPARED BY FLORIDA POWER&LIGHT COMPANY MATERIALS, CODES AND INSPECTIONS SECTION 700 UNIVERSE BLVD.JUNO BEACH, FLORIDA 33408 FOR PLANT ST.LUCIE UNIT 1 P.O.BOX 128 FT~PIERCE, FLORIDA.33454 COMMERCIAL SERVICE DATE: 21 DECEMBER 1976 NRC DOCKET NUMBER: 50-335 PREPARED BY: G.P.ALEXANDER

ISI SPECIALIST:

REVIEWED BY ISI EN INE DATE APPROVED BY DATE'T ON S PE VISOR-C&P I AUTHORIZED BY MANAGER-MCI DATE z 8+1 8709090272 870902 PDR ADOC)('5000335

': PDR l 7&X~jill I)1 ,7', II.i77 1 1, 11, 7 7)'g~SP r~1 l'=r ir~I E Ap rr a ,'3 3~+411" Sf ll'$t('r ABSTRACT This document describes the basis and plans for the Second Ten Year Inservice" Inspection Summary Program for St.Lucie Unit 1.This summary addresses the requirements of the ASME B&PV Code Section XI,1983 Edition through the Summer 1983 Addenda, and is subject to the limitations and modifications stated in 10 CFR 50.55a (b)(2)(i).

In addition, Code Case N-408, Alternative Rules'or Examination of Class 2 Piping Section XI, Division 1 is incorporated as applicable.

Requirements for augmented examinations are also addressed.

ti As permitted by 10 CFR 50.55a (g)(4)(iv), FP&L may elect to invoke therequirements

'et forth in subsequent editions and addenda that are incorporated by reference in 10 CFR 50.55a (b),subject to the limitations and modifications listed in 10 CFR 50.55a(b), and subject to Commission approval.Included in this summary are the applicable Relief Requests and tables identifying all items subject to examination by Code Category and item number.K I f EI c itg e 8,d 1 I I C'i f 1 fQ E k J C A t TABLE OF CONTENTS TITLE PAGE ABSTRACT TABLE OF CONTENTS RECORD OF REVISIONS LIST OF ABBREVIATIONS

1.0 INTRODUCTION

1.1 General 1.2 Applicable Editions&, Addenda to Section XI 1~3 System Classification

1.4 Inspection

Program 2,0 Development of the Inspection Program F 1 Class 1 2.1.1 ASME Code Exemptions Employed 2.1.2 Component/Piping Examination Development 2.1.3 Component Supports 2.1.4 System Pressure Tests 2.1.5 Instrumented Inspection Technique 2.1.6 Repair and Replacement 2.2 Class 2 2.2.1 ASME Code Exemptions Employed 2.2.2 Component/Piping Examination Development 2.2.3 Component Supports 2.2.4 System Pressure Tests 2.2.5 Instrumented Inspection Technique 2.2.6 Repair and Replacement 2.3 Class 3 2.3.1 ASME Code Exemptions Employed 2.3.2 Component Supports 2.3'System Pressure Tests 2.3.4 Instrumented Inspection Technique 2.3.5 Repair and Replacement 2.4 Flaw Indications 4 2.5 Class MC Components f1'i~sr.~~re L>r~4 r..!'

3.0 Relief Requests 3.18c2 General 3.3 Format 3.4 Relief Request Tables 3'List of Applicable Relief Requests 4'Evaluation Criteria 4.1 Class 1 Acceptance Standards 4.2 Class 2 Acceptance Standards 4.3 Class 3 Acceptance Standards 4.4 Acceptance Standards for Supports (Class 1,2,3)5.0 Submittal Summary 5.1 Description of ISI Plan Format 5.2 Description of Summary Submittal Tables 6.0 Records and Data Management

7.0 Appendices

A CLASS 1 EXAMINATION

SUMMARY

TABLES B CLASS 2 EXAMINATION

SUMMARY

TABLES C CLASS 3 EXAMINATION

SUMMARY

TABLES D CLASS 1 HANGER

SUMMARY

TABLES E CLASS 2 HANGER

SUMMARY

TABLES F CLASS 3 HANGER

SUMMARY

TABLES G ASME CODE CASES 8.0 Code Boundary Drawings LIST OF FIGURES.5.1.1 Inservice Inspection Plan Table 5.2.1 Summary Submittal Table A f C t p P t 1 PQ~(~l 4 s~4 lie&J I~-~,

REV.NO.RECORD OF REVISIONS DATE SECTION PAGE DESCRIPTION PARA'EASON FOR CHANGE APPROVAL/DATE.0 9/01/87 ORIGINAL ISSUE

'l~r I f~I ABBREVIATIONS Listed below are the abbreviations utilized in this document: AFW ASME ASB B&PV BTP CC CEDM CFR CRV C8r,PGcw ECT FP&L ISI ID HPSI JNS LPSI MSIV MCI MFW MSS AUXILARY FEEDWATER AMERICAN SOCIETY OF MECHANICAL ENGINEERS AUXILIARY SYSTEMS BRANCH (formerly APCSB)BOILER&, PRESSURE VESSEL CODE BRANCH TECHNICAL POSITION CONDENSATE SYSTEM COMPONENT COOLING WATER SYSTEM CONTROL ELEMENT DRIVE MECHANISM CODE OF FEDERAL REGULATIONS CODE REQUIRED VOLUME CODES 8c, PROGRAMS GROUP INTAKE COOLING WATER SYSTEM EDDY CURRENT TESTING FLORIDA POWER&, LIGHT COMPANY FINAL SAFETY ANALYSIS REPORT INSERVICE INSPECTION INSIDE DIAMETER HIGH PRESSURE SAFETY INJECTION JUNO-NUCLEAR ENERGY SERVICES LOW PRESSURE SAFETY INJECTION MAIN STEAM ISOLATION VALVE MATERIALS, CODES 8c INSPECTIONS GROUP FEEDWATER SYSTEM MAIN STEAM SYSTEM NUCLEAR REGULATORY COMMISSION ABBREVATIONS (cont,)NPS-NOMINAL PIPE SIZE OD PAID PRZR PSL-1 RCP SRP USAS VT OUTSIDE DIAMETER PIPING&, INSTRUMENTATION DIAGRAM PRESSURIZER PLANT ST.LUCIE UNIT 1 REACTOR PRESSURE VESSEL REACTOR COOLANT PUMP STANDARD REVIEW PLAN THICKNESS OF COMPONENT, PIPE, ETC.USA STANDARD VISUAL TECHNIQUE I.E.VT-1,VT-2

\'I t l V

1.0 INTRODUCTION

1.1 General 1.1'.1 This Summary Submittal describes the St.Lucie Unit 1 Second Ten Year Inservice Inspection Program.This Program will be implemented for the Second Inspection Interval which starts 11 Feb.1988,and ends 11 Feb.1998.The Inspection Program, which consists of ASME Class 1,2,and 3 systems, components, and related supports, is being developed giving due consideration to the following documents:

10 CFR 50.55 (a)Section XI of the ASME Code Section III of the ASME Code Section V of the ASME Code Code Case N-408 Branch Technical Position, ASB 3-1 Standard Rreview Plan 6.6,Section I,II USNRC Regulatory Guides Regulatory Guide Regulatory Guide Regulatory Guide Regulatory Guide Regulatory Guide Regulatory Guide 1.147 1.26 1.14 1.150 1.65 1.83 St.Lucie Unit 1-Technical Specifications St.Lucie Unit 1-Final Safety Analysis Report 1.1.2 The program for Inservice Testing of Class 1, 2, and 3 pumps and valves is addressed separately.

1.1.3 The First Ten Year Inservice Inspection was conducted in accord-ance with the following editions of Section XI.A.First Period (40 months)-1970 Edition thru the Minter 1970 Addenda BE Second and third periods-1974 Edition through Summer-1975 Addenda for BOP Components (see reference 1 and 2).C.RPV Examinations to 1977 Edition through S-1978 addenda, and R.G.1.150 Rev.01 (see reference 3).D.System Pressure Tests, 1980 Edition through N-1981 Addenda (see reference 4 and 5)

'E LI~I w I I r I, (4 1.1.3(cont.)

The correspondence referenced below relates to NRC acceptance to code ch'anges: 1..FPM letter: 2.FP&L letter: 3.FP&L letter: 4.FP&L letter: 5.NRC TAC-Nos.L-77-302, L-,81-203, L-83-254, L-85-149, 59918 and dated 7/1/77 and 9/87 dated 9/21/81 dated 4/22/83 dated 4/5/85 59919 1.2 Applicable Editions and Addenda to Section XI Pursuant to Title 10 of the Code of Federal Regulations, part 50, paragraph 50.55 (a),the Inservice Inspection requirements applicable to nondestructive examination and system pressure testing at St.Lucie Unit 1 are based on the rules set forth in the 1983 Edition of ASME Section XI through Summer 1983 Addenda, hereafter referenced to as ASME Section XI.As permitted by 10 CFR 50.55a (g)(4)(iv), FP&L may elect to invoke the requirements set forth in subsequent editions and addenda that are incorporated by reference in 10 CFR 50.55a (b), subject to the limitations and modifications listed in 10 CFR 50.55a(b), and subject to Commission approval.Portions of editions and addenda may be used provided that all related requirements of the respective editions and addenda are met.It is FP&L's intent to continually evaluate and apply, as appropriate changes in adopted Code editions and addenda which will improve the overall quality and safety of the ST.Lucie Unit 1 nuclear power plant.1.3 System Classification The Construction Permit for St.Lucie Unit 1 was issued in July, 1970.The Commercial Operating License was issued in March 1976.Florida Power and Light Company is the owner of record.Vessels, piping, pumps,and valves were built and installed according to the rules of ASME Section III and USAS B31.7 for those systems classified as Class 1, 2, and 3.The system classification used'as a basis for the Inservice Inspec-tion Plan are based on the requirements of 10 CFR 50.2 (v)and the Regulatory Guide 1.26.Class 1 System Boundaries were developed based on 10 CFR 50.2 (v).Class 2 and 3 System Boundaries were developed based on Regulatory Guide 1.26.Code Boundary diagrams are provided to show the specific boundaries for Class 1, 2, and 3 systems in Section 8 of this Submittal.

1.4 Inspection

Program Examinations for the Second Ten Year Interval will be scheduled in accordance with Inspection Program B, as described in IWA-2400 of ASME Section XI, for all Class 1, 2,and 3 systems, components, and supports.10 L.

2.0 DEVELOPMENT

OF INSPECTION PLAN This section is the detailed description of the Inspection Plan basis for each component and/or system to be examined.2.1 Class 1 Systems The Class 1 System Boundaries are developed based upon the require-ments of 10 CFR 50.2(v), and the St.Lucie Unit 1 FSAR.The systems/Components to be examined in the Class 1 System are described in detail below: 2.1.1 ASME Code Exemptions Employed IWB-1220: The following components (or parts of components) are exempted from the volumetric and surface exami-nation requirements of IWB-2500: (a)Components that are connected to reactor coolant system and part of the reactor coolant pressure boundary and are of such a size and shape so that upon postulated rupture the resulting flow of coolant from the reactor coolant system under normal operating conditions is within the capacity of makeup systems which are operable from onsite emergency power;(b)component connections, piping, and associated valves of 1 inch nominal pipe size and smaller, except for steam generator tubing;(c)Reactor head connections and associated piping, 2 in.nominal pipe size and smaller, made inaccessible by control rod drive penetrations.

2.1.2 Component/Piping Examination Development Reactor Pressure Vessel The longitudinal weld seams (9), shell side of the flange to shell weld, upper shell to intermediate shell circumferential weld, inter-mediate to lower shell circumferential weld, lower shell to bottom head circumferential weld, bottom head disk weld, and bottom head meridional welds(6), nozzle to shell welds(6), nozzle inner radii(6), nozzle to extension piece and extension piece to pipe circ.welds are examined from the I.D.surface using remote examination equipment and techniques.

Those areas of the bottom head which are obstructed from a complete I.D.examination are manually examined from the O.D.surface to the maximum extent possible.The flange to upper shell weld is examined from the upper shell I.D.surface and from the flange seal surface manually(UT).

The flange ligaments are exam-ined manually from the mating surface.Closure studs are manually examined using surface and volumetric techniques when removed, 11 (5

Reactor Pressure Vessel (cont.)Relief Request (RR-1)covers the areas which are not examinable.

Core support lugs and the remainder of the vessel interior are examined visually utilizing remote television equipment.'A permanent visual record of these areas is recorded.The Core Barrel including the repaired areas will be visually exam-ined during the scheduled ASME Section XI B-N-1 visual examinations to the extent possible, with the entire Core Barrel being examined at or near the end of the Inspection Interval.The RPV examinations will be performed to meet the intent of the requirements of Regulatory Guide 1.150 and ASME Section XI.Reactor Vessel Closure Head All ultrasonic examinations are performed manually.The flange to shell weld, dome circumferential weld, and the head meridional welds (6)will be examined from the O.D.surface to the extent practical due to obstruction by the CRDM penetrations.

Refer to Relief Request (RR-2)for areas not examinable.

The peripheral CRDM welds and extension tube welds, are subject to surface examination (PT)to meet the requirements of Category B-0 inservice inspection requirements.

The RPV Closure Head examinations will be performed to meet the intent of the requirements of Regulatory Guide 1.150 and ASME Section XI.Steam Generators (Primary Side)All examinations are performed manually from the O.D.surface of the components.

Areas to be examined include the tube sheet to extension piece wel'd, extension piece meridional welds(4), extension piece to lower head weld, lower head meridional welds, nozzle to vessel welds nozzle inner radii, support skirt to vessel weld and stay cylinder welds.Primary bolting receives a visual examination.

Refer to Relief Request (RR-3)for areas not examinable.

Pressurizer All volumetric examinations are done manually from the O.D.surface.Areas include both shell to head welds and 1 foot of their respec-tive intersecting longitudinal welds(2), nozzle to shell welds, and a visual examination of manway bolting.12

Pressurizer(cont.)

Refer to Relief Request (RR-5)for areas not examinable.

Four support bracket welds and the support skirt weld receive a surface examination.

Reactor Coolant Pressure Boundary Piping All volumetric examinations are conducted from the O.D.surface with the exception of the Reactor Vessel nozzle to extension and extension to pipe welds (as addressed under Reactor Vessel), Areas to be examined include circumferential welds, longitudinal welds, and branch connection welds.Refer to Relief Request.(RR-6)for areas of welds not examined.Welds on piping greater than 1 inch nominal pipe size are selected for examination in accordance with Table IWB-2500-1, categories B-F and B-J as follows: a)All terminal ends in each pipe or branch run connected to vessels b)All terminal ends and joints in each pipe or branch run connected to other components where the stress levels exceed the following limits under loads associated with specific seismic events and operational conditions:

1)primary plus secondary stress intensity range of 2.4S for m ferritic steel and austenitic steel;2)cumulative usage factor U of 0.4.c)All dissimilar metal welds between combinations of: 1)carbon or low alloy steels to high'lloy steels;2)carbon or low alloy steels to.high nickel alloys;3)high alloy steels to high nickel alloys.d)Additional piping welds so that the total number of circumferent-ial butt welds (or branch connection or socket welds)selected for examination equals 25%of the cizcumferential butt welds (or branch connection or socket welds)in the reactor coolant system.This total does not include welds excluded by IWB-1220.These addi-tional welds may be located in one loop.13 Reactor coolant Pressure Boundary Piping (cont.)One loop as defined for PWR Plants: a)one hot leg and one cold leg in one reactor coolant piping loop;b)one branch, representative of an essentially symmetric piping configuration among each group of branch runs that are connected to reactor coolant loops and that perform similar system functions; c)each piping and branch run exclusive of the categories of loops and runs that are part of a)and b)above, Reactor Coolant Pumps As required by Regulatory Guide 1.14, the bore and keyway areas of each reactor coolant pump flywheel are examined ultrasonically once each period.Additionally, the flywheels receive a 100Yo volumetric examination (UT)and a surface examination near the end of each Inspection Interval.A 100%volumetric examination (RT)is required to be performed on the casing upper and lower scroll welds, and a visual examination of the'casing internal surfaces of one (1)reactor coolant pump.These examinations are the subject of Relief Request (RR-7).The RCP studs are examined ultrasonically from the bore hole,and the nuts are visually examined (VT-1)inplace.In the event the pump is disassembled,(see Relief Request (RR-7))the bolting and flange surface are visually examined.Steam Generator Tubes The Steam Generator tubing surveillance requirements are contained in the Plant Technical Specification 3/4.4.5.This specification is based on a modification of USNRC Regulatory Guide 1.83, Revision 1, as modified by St.Lucie Unit 1 Technical Specifications and contains-.

the requirements for sampling, acceptance, plugging and reporting.

Eddy current examination of steam generator tubing is conducted in accordance with Article IV of ASME Section XI.Valve Bodies: Internal Surfaces Class 1 valves exceeding 4 inch nominal pipe size are required to receive a visual examination (VT-3)of the internal surfaces.Refer to Relief Request (HR-8)for clarification.

14 Component Supports-Class 1" Integral attachment welds are selected and examined per the require-ments of Table IWB-2500-1, Categories B-H and B-K-1.Class 1 compon-ent supports subject to examination are selected in accordance with Subarticle IWF-2510.Those supports selected receive a visual examin-ation (VT-3)to determine their general mechanical and structural condition.

An additional visual examination (VT-4)is performed on spring type supports and mechanical/hydraulic snubbers to determine conditions relating to their operability to the extent of confirming their functional adequacy, verfication of settings or freedom of motion, as applicable.

The functional testing requirements, testing method, and extent and frequency of testing for mechanical and hydraulic snubbers shall be governed by the Plant Technical Specifications.

System Pressure Tests-Class 1 System pressure tests are conducted on Class 1 systems'nd components as follows: a)A System Leakage Test is conducted prior to plant startup following each refueling outage.The pressure retaining boundary subject to the leakage test corresponds to the reactor coolant system boundary, as established with all valves aligned as required by approved plant operating procedures for startup and normal reactor operation.

The VT-2 examination boundary extends to include the second closed valve at the boundary extremity, which may be a check valve opposing Reactor Coolant system pressure.The test is conducted at system operating temperature and pressure.b)A System Hydrostatic Test is conducted on all Class 1 piping and components within the system boundary at or near the end of the Inspection Interval.The system test boundary is determined in accordance with the requirements of paragraph IWA-5229 of the Code.2.1.5 Instrumented Inspection Technique (IIT)FP&L will continue to utilize the Instrumented Inspection Technique for only those portions of Class 1 systems which have been eval-uated in accordance with H.A.F.A.International Topical Report: HAFA 135(P),Section IV.The IIT, where employed, is done in lieu of both the system functional test and system hydrostatic test and is employed each period, if applicable.

Reference Documents'P8rL Letter-L-85-379, Dated Oct.4,1985(Request for approval to use Instrumented Inspection Technique)

NRC Letter, Dated Nov.8,1985 (TAC¹59917)15 Repair to Class 1 components, piping, and supports is done in accord-ance with the requirements of IWA-4000 and IWB-4000,ASME Section XI.Replacement of Class 1 components, piping, and supports is done in accordance with the requirements of IWA-7000 and IWB-7000 of ASME Section XI.16

~,

2.2 Class 2 Systems The Class 2 Systems Boundaries are developed based upon the require-ments of Regulatory Guide 1.26 and St.Lucie Unit 1-FSAR.Specific examination requirements for components and systems are based upon the requirements of ASME Section XI and as modified by 10 CFR 50.55a paragraph (b)(2)(IV)and Code Case N-408.Supplemental examinations required by Standard Review Plan SRP 6.6,Section I-7, II-7,and ASB 3-1 are also incorporated where applicable.

Details of how all requirements are factored into the Class 2 Program are delineated below: 2.2.1 ASME Code Exemptions Employed Code Case N-408-Alternative Rules for Examination of Class 2 Piping Section XI, Division 1.The following alternative rules are used for determining components subject to examination and for establishing examination requirements for Class 2 piping under Section XI, Division l.a)The following components (or parts of components) of RHR,ECC,and CHR systems (or portions of systems)are exempt from the volumetric and surface examination requirements of IWC-2500: 1)vessels, piping, pumps, valves, and other components NPS 4 inch and and smaller in all systems except in high pressure safety injection systems of pressurize'd water reactor plants;2), vessels, piping, pumps, valves, and other components NPS 1 1/2 inch and smaller in high pressure safety injection systems of press-urized water reactor plants;3)component connections NPS 4 inch and smaller (including nozzles, socket fittings, and other connections) in vessels, piping, pumps, valves, and other components of any size in all systems except in high pressure safety injection systems of pressurized water reactor plants;4)component connections NPS 1 1/2 inch and smaller (including nozzles,socket fittings, and other connections)in vessels,,piping, pumps, valves,and other components of any size in high pressure safety injection systems of pressurized water reactor plants;5)vessels, piping, pumps, valves, other components, and component connections of any size in statica/ly pressurized, passive,(i.e.

no pumps)safety injection systems of pressurized water reactor plants')piping and other components of any size beyond the last shutoff valve in open ended portions of systems t)at do not contain water during normal plant operating conditions.

2.2.1 ASME Code Exemptions Employed (cont.)~~b)The following components (or parts of components)other than RHR,ECC, and CHR systems (or portions of systems)are exempt from the volume-tric and surface examination requirements of IWC-2500: 1)vessels, piping, pumps, valves, and other components NPS 4 inch and smaller;2)component connections NPS 4 inch and smaller (including nozzles, socket fittings, and other connections

)in vessels, piping, pumps, valves,and other components of any size;3)vessels, piping, pumps, valves, other components, and component connections of any size in systems or portions of systems that operate (when the system function is required)at a pressure equal to or less than 275 psig and at a temperature equal to or less than 200 degrees Fahrenheit; 4)piping and other components of any size beyond the last shutoff valve in open ended portions of systems that do not contain water during normal plant operating conditions.

c)For welds in austenitic stainless steel or high alloy piping, the requirements of Table 1, Category C-F-1, Pressure Retaining Welds in Austenitic Stainless Steel or High Alloy Piping, (located in Code Case N-408)shall be used as an alternative to the requirements of Table IWC-2500-1.

d)For welds in carbon or low alloy steel piping, the requirements of Table 2, Category C-F-2, Pressure Retaining Welds in Carbon or Low Alloy Steel Piping, (located in Code Case N-408)shall be used as an alternative to the requirements of Table IWC-2500-1.

1 Note2: Statically pressurized, passive safety injection systems of pressurized water reactor plants are typically called by such names as accumulator tank and associated system, safety injection tank and associated system, or core flooding tank and associated system.Note3: Normal plant operating conditions include reactor startup, operation at power, hot standby, and reactor cooldown to cold shut down conditions, but do not include test conditions.

18 Component/Piping Examination Development Steam Generators (Secondary Side)All required volumetric examinations are conducted manually from the O.D.surface of Steam Generators to the extent required in Table IWC-2500-1 of ASME Section XI.The examinations are distributed between the two generators.

Specific referencing paragraphs are as follows;Code Category C-A Note 3: In the case of multiple vessels of similar design, size,and service(such as steam generators and heat exchangers) the required examinations may be limited to one vessel or distributed among the vessels.For both generators, the steam and feedwater nozzle welds and inner radii areas are examined due to the selection criteria utilized for both the Feedwater and Main steam piping systems.Secondary manway bolting receives a visual (VT-1)examination, in place.Shutdown Cooling Heat, Exchangers All volumetric examinations are conducted manually from the O.D.surface of the heat exchanger.

Areas examined include the two girth welds on the primary water box and the inlet and outlet nozzles on each heat exchanger.

The examinations are equally distributed between the two vessels.Main Steam and Feedwater Piping All volumetric and surface examinations on these piping systems are performed from the O.D.surface.Piping welds are selected for examination based upon the requirements of Code Case N-408, Table 2, Code Category C-F-2.In addition, high stress welds that exceed the criteria of Note 1a, in the 1983 Edition of ASME Section XI, Category C-F shall be examined.IWC-2500-1, Category C-F, Note 1(a): all welds at locations where the stresses under the loadings resulting from normal and upset plant conditions, as calculated by the sum of Eqs.(9)and (10)in NC-3652, exceed 0.8(1.2Sh+SA)Welds in those portions of systems addressed in SRP 6.6 paragraph I, and SRP 3.6.1, BTP ASB 3-1 are addressed as follows;Pipe to pipe welds and longitudinal seams are required to be examined, additionally, the Code Category (C-F)boundary is extended past the code class boundary (MSIV)to the first restraint providing at least two degrees of restraint to piping thermal expansion.

Welds and supports are specifically identified in the Main Steam and Feedwater examination tables.19 2.2'Component/Piping Examination Development (cont.)~~Austenitic Piping Systems All volumetric and surface examinations on these piping systems are performed from the O.D.surface.Piping welds are selected for examination based upon the requirements of Code Case N-408, Table 1, Code Category C-F-1.2.2.3 Component Supports-Class 2 Integral attachment welds are selected and examined per the require-ments of Table IWC-2500-1, Category C-C.Class 2 component supports subject to examination are selected in accordance with Subarticle IWF-2510'hose supports selected receive a visual examination (VT-3).to determine their general mechanical and structural condition.

An additional visual examination (VT-4)is performed on spring type supports and mechanical/hydraulic snubbers to determine conditions relating to their operability to the extent of confirming, their functional adequacy, verification of settings or freedom of motion, as applicable.

The functional testing requirements, testing method, and extent and frequency of testing for mechanical and hydraulic snubbers shall be governed by the Plant Technical Specifications

~2.2.4 System Pressure Tests-Class 2 The pressure retaining components within the Class 2 system boundar-ies are subjected to System Pressure Tests in accordance with IWC 5210 and visually examined (VT-2)per IWA-5240.The tests are conducted as follows: a)System Functional Test, IWA-5211 (b),-For those systems or portions of systems,not required to operate during normal reactor operation, but for which periodic system or component functional'ests are performed, as required by the Plant Technical Specific-ations and/or the Pump and Valve (IST)program, a VT-2 examination is performed at least once each period (except in the period when a hydrostatic test is performed) during the system or component functional test.The boundary subject to pressuriza-tion during a System Functional Test includes only those pressure retaining components within the system boundary pressurized under the*test mode required during the performance of the periodic system (or component,)

functional test.Nominal operating pressure of the system functional test is acceptable as the system test pressure.20 t 2.2.4 System Pressure Tests-Class 2 (cont.)b)A System Hydrostatic Test, IWA-5211 (d)is performed on Class 2 systems at least once during each Inspection Interval.The bound-ary subject to test pressurization during a System Hydrostatic Test is defined as the Class 2 system boundary and includes only those portions of the system required to operate or support the safety system function up to and including the first normally closed valve(including a safety or relief valve), or valve capable of automatic closure when the safety function is required.The VT-2 examination performed during a System Hydrostatic Test is used to satisfy the system functional test requirements of a)above for the period in which it conducted.

2.2'Instrumented Inspection Technique (IIT)FP&L will continue to utilize the Instrumented Inspection Technique for only those systems(or portions of systems)which have been eval-uated in accordance with H.A.F.A.International Topical Report: HAFA 135(P),Section IV.The IIT, where employed, takes the place, of;both the system functional test and the s'stem hydrostatic test and is employed each period, as applicable.

Reference Documents:

FP&L Letter: L-85-379, Dated Oct.4,1985(Request for approval to use Instrumented Inspection Technique)

NRC Letter, Dated Nov.8,1985 (TAC¹59917)2.2.6 Repair and Replacement

-Class 2 Repair to Class 2 components, piping,,and supports is done in accord-ance with the requirements of IWA-4000 and IWC-4000,ASME Section XI.Replacement of Class 2 components, piping, and supports is done in accordance with the requirements of IWA-7000 and IWC-7000 of ASME Section XI.21 2.3 Class 3 Systems'The Class 3 System Boundaries are developed based upon the require-ments of Regulatory Guide 1.26 and ASME Section XI.2,.3.1 ASME Code Exemptions Employed Integral attachments of supports and restraints, to components that are 4 inch NPS and smaller, within the system boundaries of Examina-tion Categories D-A, D-B, and D-C of Table IWD-2500-1, shall be exempt from the visual examination (VT-3), except for the Auxiliary Feedwater Systems.Integral attachments of supports and restraints, to components exceeding 4 inch NPS may be exempted provided: a)the components are located in systems (or portions of systems)whose'unction is not required in support of reactor residual heat removal, containment heat removal, and emergency"core cooling;b)the components operate at a pressure of 275 psig or less and at a temperature of 200 degrees Fahrenheit(93 degrees Centigrade) or less~2.3.2 Component Supports-Class 3 Class 3 piping and component support integral attachment welds, except those exempted by IWD-1220.1 and IWD-1220.2 are visually examined (VT-3).Other Class 3 piping and component supports are visually examined to determine their general mechanical and structural integrity.

An additional visual examination (VT-4)is performed on spring type supports and mechanical/hydraulic snubbers to determine conditions relating to their operability to the extent of confirming, their functional adequacy, verfication of settings or freedom of motion, as applicable.

The Class 3 supports subject.to examination have been selected in accordance with Subarticle IWF-2510 of ASME Section XI.The functional testing requirements, testing method, and extent and frequency of testing for mechanical and hydraulic snubbers shall be governed by the Plant Technical Specifications.

22 2.3'System Pressure Test-Class 3~~The pressure retaining components within the boundary of each system specified for Categories D-A, D-B, and D-C are pressure tested and visually examined (VT-2)for leakage during the following tests: a)For systems required to operate during normal plant operation, a System Inservice Test, IWA-5211(c) is conducted at least once each period while the system is in operation and at operating pressure.The boundary subject to test pressurization, during a System Inservice Test, extends to those'ressure retaining components under operating pressure during normal system oper-ations;OR b)System Functional Test, IWA-5211(b), For those systems, or portions of systems, not required to operate during normal plant operation, a VT-2 examination is performed during a periodic system or component functional test, as required by the Plant Technical Specifications and/or the Pump and Valve (IST)Program.The boundary subject to test pressurization during a System Functional Test includes only those pressure retaining components within the system boundary pressurized under the test mode required during the performance of the periodic system (or Component)functional test.The nominal operating pressure of the system functional test is acceptable as the system test pressure.AND c)System Hydrostatic Test,IWA-5211(d), is performed on Class 3 sys-tems once in each interval.The boundary subject to test pressurization extends up to and includes the first normally closed valve, or valve capable of automatic closure, as required to perform the safety-related system function.The system pressure requirements are defined in Subarticle IWD-5223 of ASME Section XI.2.3.4 Instrumented Inspection Technique (IIT)FP&L will continue to utilize the Instrumented Inspection Technique for only those systems(or portions of systems)which have been eval-uated in accordance with H.A.F.A.International Topical Report: HAFA 135(P),Section IV.The IIT, where employed, takes the, place of the system functional test and system hydrostatic test and is employcd-each period, if applicable.

Reference Documents:

FP&L Lelber: L-85-379, Dated Oct.4,1985(Request for approval to use Instrumented Inspection Technique)

NRC Letter, Dated Nov.8,1985 (TAC¹59917)23

~~2.3.5 Repair and Replacement

-Class 3'Repair to Class 3 components, piping,and supports is done in accord-ance with the requirements of IWA-4000 and IWD-4000 of ASME Section XI.Replacement of Class 1 components, piping,and supports shall be in accordance with the requirements of IWA-7000 and IWD-7000 of ASME Section XI.2.4 Flaw Indications Class 1 Pursuant to the ASME Section XI, subarticle IWB-2420,in the case of welds where examinations reveal the presence of flaw indications that exceed the acceptance standards and the component is evaluated as acceptable for service, the areas containing the flaw indications will be scheduled for reexamination during the next three(3)inspect-ion periods of Inspection Plan B (IWB-2410).

Provided the,-.', flaw indications remain essentially the unchanged for three, successive inspection periods, the component examination schededule will revert to the original schedule of successive inspections.

Class 2 Pursuant to the ASME Section XI, subarticle IWC-2420,in the case of welds where examinations reveal the presence of'law indications that exceed the acceptance standards and the component is evaluated as acceptable for service, the areas containing the flaw indications will be scheduled for reexamination during the next inspection period of Inspection Plan B per IWC-2412.Provided the flaw indications remain essentially the unchanged for the next inspection period, the component examination schededule will revert to the original schedule of successive inspections.

24 2.5 Class MC Components

'0 CFR 50.55a presently incorporates only those portions of Section XI that address the ISI requirements for Class 1, 2,and 3 components and their supports.The regulation does not currently address the ISI of containments.

Since this proposed amendment is only intended to update current regulatory requirements to include the latest ASME Code edition and addenda, the requirements of Subsection IWE would not be imposed upon Commission licensees by this amendment.

Per the above statement, Subsection IWE of Section XI is exempted and therefore will not be addressed in this Program.

Reference:

Federal Register,Vol.

53, No.123 Dated June 26,1987.I 25 During the First Ten Year inspection Interval there were cases where component configuration and/or interferences, prohibited 100%coverage of the Code required volume or surfaces.In each case, where such limitations were encountered, the details are documented in a Relief Request.Since those same conditions will prevail during this Inservice Inspection Interval, those Relief Requests are included that will utilized in the Second ISI Interval.In cases where parts of the required examination areas cannot be effectively be examined, because of a combination of component design or current inspection technique limitations, FP&L will continue to evaluate the development of new or improved examination techniques, with the intent of applying these techniques where a practical improvement in the examination can be achieved.3.1 FORMAT Relief Requests are arranged in order by Code Category, followed by those of general nature where Code Category does not apply.They are numbered sequentially.

Each Relief Request contains the following information:

A)COMPONENT CLASSIFICATION:

describes the Code Class, component or system description,and Code Category description (if applicable)

B)EXAMINATION/TESTING REQUIREMENTS:

lists Code Category, Code Item Number, (if applicable)and describes the examination/test require-ments.C)RELIEF REQUESTED:

describes specific areas in which relief is needed,(i,e.

weld i.d.and description)and gives brief descrip-tion for the reason why relief is.being requested.

D)BASIS FOR RELIEF: describes examination(s) conducted and/or eval-uated to support the reason relief is being requested.

E)ALTERNATE EXAMINATIONS:

proposes alternative examinations to replace, supplement, or support the examinations/tests and evaluations required or already conducted.

F)IMPLEMENTATION SCHEDULE: proposed time frame/schedule G)ATTACHMENTS:

lists drawings, tables,etc,.

3.2 Relief Request Tables Where applicable, supportive documentation in the form of Tables and Figures specifically identify each item affected by the Relief Request and describes the limitations encountered and the extent, of examination achieved during the First Ten Year ISI Interval which is expected to remain the same for the Second Ten Year ISI Interval.26 Relief Requests known to be applicable to the ISI examinations are listed below.Additional Relief Requests, as deemed necessary, will be submitted pursuant to the requirements of 10 CFR 50.55a(g)(5).

'RR¹Description Code Code RR-1 Pressure Retaining Welds in ReactorVessel RR-2 Reactor Pressure Vessel Closure Head Pressure Retaining Welds in Vessels, other than Reactor Vessel Full Penetration Welds of Nozzles in Vessels Program B,Steam Generator Full Penetration Welds of Nozzles in Vessels Reactor Pressure Vessel B-,A B-A B-A B-B B-D B-D B-D B1.10 B1.11 B1.12 B1.20 B1~21 B1.22 B1.22 B1.40 B2.32 B2.40 B3.130 B3.140 B3.90 B3.100 RR-5 RR-8 RR-9 Full Penetration Welds of Nozzles in Vessels Program B Pressurizer Pressure Retaining Welds in Piping Pressure Retaining Welds in Pump Casing/Pump Casing Valve Bodies,>4 in.NPS Open Ended Systems B-D B-D B-J B-L-1 B-L-2 B-M-2 C-H B3.110 B3.120 B9.11 B9.31 B12.10 B12.20 B12.50 RR-10 IWF-5000 Test Requirements RR-11 Ultrasonic Calibration Blocks APPENDIX III RR-12 Class 1&, 2 Welds 27 ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 1 A.COMPONENT CLASSIFICATIONc Cl ass Reactor Pressure Vessel Pressure Retaining Welds in Reactor Vessel B.EXAMINATION REQUIREMENTS:

EXAM CAT.ITEM NO.EXAMINATION REQUIREMENTS Bi.10 Bi.11 Bi.1=Volumetri c e:<aminati on to include essenti al l y 100/of the weld'ength of one beltline region weld.These examinations shall be performed during each inspection interval, and may be performed at or near the end of the inspection interval.B-A 81.20 Bi~~1 91.Z0 Volumetric e:<amination to include essentially 100/of the weld length of one acces ible weld.These examinations shal l be performed during each inspection interval, and may be performed at.or near the end of'he inspection interval f or bottom head welds only.Volumetric examination to include essentially 100/of the weld length.This e:<amination shal l be perf ormed during each inspection interval, and may be deferred till the end of the interval providing that at least 50/of the shell to flange weld is e:<amined by the end of the first inspection period and the'emainder e:<amined by the end of the third period in conjunction with the nozzle examination of e;<amination category B-D (Program B).

ST.LUCIE NUCLEAR POWER PLANT UNIT i SECOND 1NSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST NO.: i C.RELIEF REQUESTED!

Relief is requested from the ABME Boiler and Pressure Vessel Code required volume due to the f ol lowing: (i)Configuration and permanent attachments prohibit i00%ultrasonic e<amination coverage of the required e:<amination volume.(.)Interference from search unit wedge-to-component near surface interface noise, and (3)Component geometric interference with scanning equipment and/or geometric shadowing of examination areas.Relief is requested for the following welds: WELD I DENT1F I CAT I ON WELD DESCRIPTION 7-.03 204-0.04-03A 204-03B.04-03C 04-03D 204-03E 204-03F UPPER SHELL-TO-FLANGE WELD LOWER HEAD DOLLAR PLATE LOWER HEAD MERIDIONAL WELDB 10-203 9-203 3-203A 3-203B 3-203C LOWER SHELL-TO-LOWER HEAD WELD MIDDLE SHELL-TO-LOWER SHELL WELD LOWER SHELL VERTICAL WELDS D.BASIS FOR RELIEF'.i0 CFR 50.55a (g)(4)recognizes that throughout the service life of a nuclear power facility, components which are classif ied as ABME Code Class i shall meet the requirements, e;<cept design and access provisions requirements, set forth in Section XI, to the extent pr actical within the limitations of design, geometry and materials of construction of the components.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.: 1 2.Configuration and permanent attachments prohibit 100/-ultrasonic e<amination coverage of the required code vol ume.Additional ultrasonic techniques are employed, where practical, to achieve the code, required volume.Described below, by weld description, denotes the limitations encountered and those additional techniques employed to compensate for those areas where CRV could not be effectively covered.a.RPV LOWER HEAD WELDS The only e,<amination coverage limitations e;<perienced during e.<amination of the lower head dollar plate weld, no.204-02, were due to near'surface interface noise.Those volumes shadowed by the interface noise were completely e:<amined with the 45-degree full vee path scans.See dwg.no.001-LIM and 001-PSLRR for location of weld.WELD NO.EXAM ANGLE/OF VOLUME NOT FIGURE NO.EFFECTIVELY EXAMINED~04-0.0 DEGREE 45 DEGREE 60 DEGREE COMBINED COVERAGE 50.0 0 16.'P'P 0 001-LIM N/A 001-LIM+COMBINED COVERAGE INDICATES THE PERCENT OF CODE REQUIRED VOLUME NOT EFFECTIVELY COVERED BY AT LEAST ONE CALIBRATED BEAM.TABLE NO.1 b.LOWER HEAD MERIDIONAL WELDS Access for evaminations of the Lower Head Meridional Weld, Nos.204-03A through F, was limited due to interference from the core support lugs and flow skirt Dr awing No.001-LIM is a r ol lout plan view of the scan surface limitations for the meridional welds.These areas of inaccessibility resulted in volumetric coverage limitations quantified in Table 2 of thi=Relief.

ST.LUCIE NUCLEAR POWER PLANT UNIT i SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: WELD NQ.EXAM ANGLE r.QF VOLUME NOT FIGURE NQ.EFFECTIVELY EXAMINED 204-03A 204-03B 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMBINED COVERAGE 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMBINED COVERAGE 74.82 63.92 62, 24 57.13 49.56 0 79.99 71.34 70.0 63~94 58.36 001-LIM 001" LIM 204-03C.0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMB I NED COVERAGE 74.82 71.75 57.13 49.56 0 001-LIM 204-03D 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMBINED COVERAGE 79.99 71.34 70~0 63.94 58~36 0 001-LIM 204-03E 204-03F 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DESF(EE T+COMBINED COVERAGE 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMBINED COVERAGE 74.82 71.75 49.56 0 79.9'9 71.84 70.0 63.94 58~36 0 001-L IM 001-LIM TABLE NQ.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 1 c.RPV CIRCUMFERENTIAL WELDS'The mechani"ed examinatian af the Lower Shell-ta-Lawer Head We 1 d, Na.10-203, was limited due to inter ference fram the care suppart.lugs and anti-rotation lugs.The near surface volume was effectively e,<amined with 45-degree full vee path scans.Drawing Na.001-LIM shows the inaccessible scan surfaces fram the vessel inside surface.Table lists the coverage limitations for each beam campanent.

WELD NO./OF VQLUME NQT FIGURE NO~EFFECTIVELY EXAMINED 10-203 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE 60 DEGREE+COMBINED COVERAGE Z6.61 17.71 23.46 2~45 8.73 0 001-LIM TABLE NQ.d.MIDDLE SHELL-TO-LQWER SHELL WELD E:<amination of the Middle Shell-ta-Lower Shell Weld, Na.9-203, was limited due to interference fram the.surveillance specimens.

The 70-degree and 45-degree full vee path scans effectively examined the near surface volume except in those areas where scanning was limited due to the surveillance specimens.

Drawing No.001-LIM is a rollout view showing Weld No.9-203 and depicting areas whar e scans cauld nat be perf ormed.Drawi ng No.001-SKT, f i gure no.2 is a sectional view shawing the 45-degree and 60-degree transverse e:<amination limitations.

Figure no.4, same drawing shaws the 70-degree transverse e<amination beam profiles in the area of the specimen tubes.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 1 WELD NO.EXAM ANGLE/OF VOLUME NOT FlBURE NO.EFFECTIVELY EXAMINED 9-.03 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T 70 DEGREE RL 70 DEGREE RLT+COMBINED COVERAGE 15.8 29.17.30 14~3 2.41~21 0 001-LIM 001-SEi T FIB~001-SKT FIB.4 TABLE NO.4 e.UPPER SHELL-TO-FLANGE WELD The Upper Shell-to-Flange Weld, No.7-203, was e:<amined from the shell side.The 0-degree and 60-degree e:<aminations were limited due to near surface interface noise;however, this volume was effectively e<amined using the 45-degree full vee path beam.Manual examinations utilizing beams directed nearly perpendicular to the weld plane from the flange seal surface will compensate for the straight beam and angle beam examination limitations on the flange side of the weld.Due to the flange configuration, no transverse evamination scans were performed from the flange side of the weld.Drawing No.001-SKT, figure no.7 provides a sertion view of the l imi tat i ons to Wel d No.7-203.WELD NO.EXAM ANGLE/OF VOLUME NOT FIBUR NO.EFFECTIVELY EXAMINED 7-203 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T+COMBINED COVERAGE 80.83 35.0 1.32 58.11 58.11 0 001-Sk~T FIG.7 TABLE NO.5 ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 1 RPV LONGITUDINAL SHELL WELDS The e,<aminations of the Lower Shell Verti<<al Welds, Nos.3-20 4, B, and'C, were limited very slightly due to anti-rotation lug and flow skir t interf erence.The near surface volume was effectively e:<amined with the 70-degree and 45-degree full vee path scans.Drawing No.001-PSI RR show~the location of those limitations due to the lug and flow skirt interference.

The e;<amination of weld no.3-2038 was also limited due to interference of a surveillance capsule.This volume was effectively e:<amined by the 45-degree full vee path beam.Drawing No.001-LIM shows the limitation due to the surveillance capsule interference.

WELD NQ.EXAM ANGLE/QF VOLUME NOT FIGUR NQ.EFFECTIVELY EXAMINED 2-203A 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T 70 DEGREE RL 70 DEGREE RLT+COMBINED COVERAGE 38.56 5.0 28.56 0 0 0 0 0 001-LIM 03C 0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T 70 DEGREE RL 70 DEGREE RLT+COMBINED COVERAGE 0 DEGREE 45 DEGREE 60 DESRFE 45 DEGREE T 60 DEGREE T 70 DEGREE RL 70 DEGREE RLT~COMBINED COVERAGE 38.56 5.0 28.56 0 0 0 0 27.77 0 19.9 0 0 0 001-LIM 001-LIM TABLE NO.6 ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 1 4.Limitations to coverage of the ABME Code Required Examination Volumes were due to component configuration and interference by vessel attachments.

These limitations ar e identified in figures and tables provided in this request for relief.The limitations were minimized to the maximum extent possible.ln all cases where limitations were experienced, the e,'<aminations were supplemented by additional scans using alternate sound beam components to enhance over al l coverage.5.The extent of e:<amination volume achieved ultrasonically and the alternate scans performed coupled with the system pressure tests provide assurance of an acceptable level of quality and safety.E.ALTERNATE EXAMINATIONSt 1)Conduct Mechani ed Ultrasonic E<aminations to the extent practical within the limitations.

~)Perform as required supplemental beam angles to ma:<imize the percentage of code required volume achieved.2)Periodic System Leakage tests per Table IWB-2500-1 4)Inservice Hydrostatic test per Table IWB-=500-1 F.IMPLEMENTATION SCHEDULEI SECOND INSERVICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 19'78 B.ATTACHMENTS:

001-PBLRR BT.LUCIE RPV GENERAL ARRANGEMENT DRAWING 001-LIM 001-BKT RP V COMPOS I TE SCAN L'M I TAT I ONS ULTRASONIC SCAN LIMITATIONS ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.s 2 A.CONPONENT CLASSIFICATION:

CLASS 1 REACTOR PF(EBBURE VESSEL-CLOSURE HEAD PRESSURE RETAININB WELDS IN REACTOR VESSEL CLOSURE HEAD TO FLANGE WELD MERIDIONAL WELDS B.EXANINATION REQUIRENENTB)

EXAN.CAT.ITEN NO.EXANINATION REQUIRENENTS 8-A 81.22 Bi.40 Volumetr i c evaminat i on to include essentially 100/of the length of one accessible weld'hi s e<amination shal l be perf ormed during each inspection interval.Volumetric and surf ace e;<amination to include essentially 100%of the weld length.This e:<amination shall be performed during each inspection intervale C.RELIEF REQUESTED!

Relief is requested from the ABNE Boiler and Pressure Vessel Code required volume due to the following:

1.Conf iguration and permanent attachments prohibit 100/Ultrasonic e:<amination of the required volume.2~Configuration and permanent attachments prohibit 100/surface e;<amination of the code required surface.

ST.LUCIE NUCLEAR PQWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST NO.: 2 3.Relief is requested from the following welds: WELD IDENTIFICATION WELD DESCRIPTION 209-02 209-03A 209-038 209-03C 209-03D 209-03F CLOSURE HEAD TO FLANGE WELD MERIDIONAL WELD MERIDIONAL WELD MERIDIONAL WELD MERIDIONAL WELD MERIDIONAL WELD MERIDIONAL WELD D.BASIS FQR RELIEF'.10 CFR 50.55a (g)(4)recognizes that throughout the service life of a nuclear power facility, components which are classif ied as ASME Class 1 shall meet the requir ements, except design and access provisions requirements, set forth in section XI, to the extent practical within the limitations of design, geometry and material of construction of the component.

2~Configuration and permanent, attachments prohibit 100/ultrasonic and surface examination of the code required volume and surface.Described below, by weld description, donotes the limitations encountered and those additional techniques employed to compensate for those areas where CRV could not be effectively covered.a.MER ID IONAL WELDB All six (6)intersecting meridional welds between the closure head to flange weld is limited to 15 1/2 inches of weld that can be examined by the ultrasonic examination method due to the closure head insulation ring.See drawing no.001-CH-1 for insulation ring limitations.

ST.LUG IE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.t 2 b.CLOSURE HEAD TO FLANGE WELD Configuration of the closure head limits the examination of the weld to a one side e<amination.

Drawing no.001-CH provides the limitations and the e:<tent of code required volume that cannot be examined.4.The e<tent of e<amination volume achieved ultrasonically and the surface area achieved and the system pressure tests provide assurance of an acceptable level of quality and saf ety.E~ALTERNATE EXAMINATIONS:

1)Conduct Volumetric Ultrasonic examinations to the extent practical within the limitations.

2)Conduct the Surface e:<amination to the extent practical within the limitations.

3)Periodic System Leal<age tests per Table IWB-2500-1 4)Inservice Hydrostatic Tests per Table IWB-2500-1 F.IMPLEMENTATION SCHEDULEi SECOND INSERV ICE INSPECTION 1NTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1988 8.ATTACHMENTS>

001-CH RPV CLOSURE HEAD LIMITATIONS 001-CH-1 RPV CLOSURE HEAD MERIDIONAL WELD LIMITATIONS l r'"n"'(

ST.LUCIE NUCLEAR POWER PLANT UNIT NO.5 SECOND INSPECTION 1NTERVAL INSERVICE INSPECTION RELlEF REQUEST NO.: Relief is requested for the following welds: CONPONENT IDENTIFICATION S/G-B WELD DESCRIPTION TUBESHEET TO HEAD WELD OUTLET AND INLET NOZZLE TO VESSEL WELDS OUTLET AND 1NLET NOZZLE INNER RADIUS SECTION HER I D IONAL HEAD WELDS TUBESHEET TO HEAD WELD OUTLET AND INLET NOZZLE TO VESSEL WELD OUTLET AND 1NLET NOZZLE INNER RADIUS SECTION MERI D I ONAL HEAD WELDS D.BASIS FOR RELIEF: l.iQ CFR 50.55 a (g)(4)recogni"es that throughout the service life of a nuclear power facility, components which are classified as ASNE Code Class 1 shall meet the requirements, except design and access provisions requirements, set forth in Section XI, to the evtent practical within the limit ations of design, geometry and materials of construction of the components.

Configuration and permanent attachments prohibit 100/ultrasonic e:<amination coverage of the required code volume.3.Additional ultrasonic techniques are employed, where practical, to achieve the code required volume.Described below, by weld description, denotes the limitations encountered and those additional techniques employed to compensate for those areas where CRV could not be effectively covered.

ST.LUCIE NUCLEAR POWER PI ANT UNIT NO.5 SECOND INSPECTION INTERVAL INSERV I CE INSPECTION RELlEF REQUEST NO.: a.TUBE SHEET TO HEAD WELD The TUBEBHEET TO HEAD WELD is obstructed from code required volume f or the f ol lowing reasons: i.Primary manways obstruct a 30 inch area, located appro;<imately 14" from the center line of the tube sheet weld on the head side.The primary manways are located at the 0 and 90 degree location.Bee drawing no.001-8$for illustration of limitations.

2.Four 1 inch lines located at appro:<imately the 31", 49", 39'nd 40 foot location, clockwise from datum O.An area, 7 inches from the weld edge and 2 inches cannot be e:<amined.

See drawing no.001-BS for illustration of limitations.

An area 4 foot, 5 inches, located 14 inches from'he weld edge is obstructed due to the Hot leg Nozzle.Bee drawing no.001-BB for illustration of scan limitations.

b.NOZZLE TO SHELL AND INNER RADIUS SECTION Scan limitations are defined as follows: 1.An area 23 inches long by 14" in width is limited.by the primary manways.See drawing no.001-SB-i.2.An area 15 inches, long by 12 foot in width is limited by the steam generator si ay base for the cold legs and an area 18 inches long on the hot leg.See drawing no.001-88-1 for limitations.

ST.LUCIE NUCLEAR POWER PLANT UNIT NO~1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.c A.COMPONENT CLASSIFICATION!

Pressure Retaining Nelds in Vessels other than Reactor Vessel Full Penetration Nelds of No'les in Vessels-Program 8 Steam Generators Primary Side 8~EXAMINATION REQUIREMENTS:

EXAM CAT..ITEM NO.EXAMINATION REQUIREMENTS 8"8 82.40 Volumetric e;<aminati on to include essential ly 100/of the weld length of one vessel amoung a group of vessels perf or ming a similar f unction.Thi s e:<aminat i ons shal l be performed during each inspection interval.8-D 83 130 82.140 Volumetric e;<amination to include essentially 100/of the weld length.These e:<aminations shall be performed during each, inspection interval.C.RELIEF REQUESTED." Relief is requested from the ABME 8oiler and Pressure Vessel Code required volume due to the following:

(1)Configuration and permanent attachments

'prohibit 100/ultrasonic e<amination coverage of the required e:<amination volume.

BT.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELlEF REQUEST NO.: '.MERIDIONAL HEAD WELDS The Wive (5)meridional head welds are obstructed by the primary manways and the nozzles.See drawing no.001-SG-2%or limitations.

The welds a%%ected are as Vol l ows".WELD NO.111-A 111-B 111-C 111-D 111-E LOCATION LOCATED AT 66 DEGREES LOCATED AT 138 DEGREES LOCATED AT.10 DEGREES LOCATED AT 28 DEGREES LQCATED AT 354 DEGREES 4.Limitations to coverage o$the ABME Code Required E<amination Volumes were due to component configuration and inter-Ference by vessel attachments.

These limitations are identified in figures and tables provided in this request for relic%.The limitations were minimized to the ma<imum e<tent possible.In all cases where limitations were e<perienced, the e;<aminations were supplemented by additional scans using alternate sound beam components to enhance overall coverage.5.The e<tent of e<amination volume arhieved ultrasonically and the alternate scans performed coupled with the system pressure tests provide assurance of an acceptable level o$quality and safety.

BT.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INBERVICE INSPECTION RELIEF REQUEST NQ.: E.ALTERNATE EXAMINATIONS) 1)Conduct VOLUMETRIC Ultrasonic Examinations to the extent practical within the limitations.

~)Perform as required supplemental beam angles to ma;<imize the percentage o$code required volume achieved.3)Periodic System Leakage tests per Table IWB-2500-1 4)Inservice Hydrostatic test per Table IWB-2500-1 F.IMPLEMENTATION SCHEDULEt SECOND INSERV ICE INSPECTION INTERVAL 11 FEauRARV 1eBB TO 11 FEeuRARV 1eee G.ATTACHMENTS:

001-SG STEAM 001-SG-1 STEAM GENERATOR TUBE SHEET TQ SHELL LIMITATION GFNERATOR NOZZLE SCAN LIMITATIONS OO1-88-2 STEAM GENERATOR MERIDIONAL WELD LIMITATIONS ST.LUCIE NUCLEAR POWER PLANT UNIT SECOND INSPECTION INTERVAL INBERVI CE INSPECTION RELIEF REQUEST NO.s A.COMPONENT CLASSIFICATIONS

-Class 1 Reactor Pressure Vessel Full Penetration Welds of Nozzles in Vessels Nozzle to Vessel Welds Nozzle Inside Radius Section B.EXAMINATION REQUIREMENTSI EXAM CAT.ITEM NO.EXAMINATION REQUIREMENTS B-D B3.90 Vol umetri c examinati on to include al 1 nozz les wi th f ul 1 penetration welds to vessel shel 1.These examinations shall be perf ormed during each inspection interval, and may be performed at.or near the end of the inspection interval.B-D B3.100 Volumetric examination to include all nozzle inner radius sections.These examinations shall be performed during each inspection interval, and may be performed at or near the end of the inspection interval.C.RELIEF REQUESTEDI Relief is requested from the ASME Boiler and Pressure Vessel Code required volume due to the following:

(1)Configuration of nozzle integral extension prohibit 100/ultrasonic examination coverage of the required ex ami nat i on vol ume.(2)Interference from search unit wedge-to-component near surface interface noise.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.c 4 Relief is requested for the following welds: WELD IDENTIF ICATION 205-05 205-10 WELD DESCRIPTION OUTLET NOZZLE OUTLET NOZZLE 205-01A 205-018 205-09A 205-09B INLET NOZZLE INLET NOZZLE INLET NOZZLE INLET NOZZLE D.BASIS FOR RELIEF'.10 CFR 50.55a (g)(4)recognizes that throughout the service life of a nuclear power facility, components which are classif ied as ASME Code Class 1 shall meet the requirements, except design and access provisions requirements, set forth in Section XI, to the extent practical within the limitations of design, geometry and materials of construction of the components.

2.Configuration and design of the nozzles prohibit 100%ultrasonic examination coverage of the required code volume.Additional ultrasonic techniques are employed, where practical, to achieve the code required volume.Described below, by weld description, denotes the limitations encountered and those additional techniques employed to compensate for those areas where CRV could not.be effectively covered.

ST.LUCIE NUCLEAR POWER PLANT UNIT SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.I 4 a.NOZZLE-TO-SHELL WELD The inlet and outlet Nozzle-to-Shel l Welds were examined f rom the vessel shell and-f rom the nozzle bore.The nozzle bore e<aminations were limited due to near surface interface noise;however, surface wave examinations were perf ormed on nozzle inner radius sections and shear wave beams directed from the shell supplemented no zle bore inside surf ace coverage.The shell side transverse examinations of the outlet no zles were limited due to interference from the nozzle integral e;<tensions.

Transverse scans from the nozzle bore on the integral e:<tensions supplemented coverage of this volume.Limitations to the inlet nozzle examinations and limitations to the outlet nozzle examinations are shown on drawing 001-PSLNOZ.

INLET NOZZLE WELD NO.EXAM ANGLE/OF VOLUME NOT FIGUR NO.EFFECTIVELY EXAMINED INLET NOZZLE (SHELL SIDE)(FROM BORE)0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T 15 DEGREE 45'DEGREE 20.0 20.0 1.0 0 0 2.2 1.6 001-PSLNOZ N/A N/A 001-PSLNOZ TABLE NO.1 OUTLET NOZZLE WELD NO.EXAM ANGLE/OF VOLUME NOT FIGUR NO.EFFECTIVELY EXAMINED OUTLET NOZZLE (SHELL SIDE)(FROM BORE)0 DEGREE 45 DEGREE 60 DEGREE 45 DEGREE T 60 DEGREE T 15 DEGREE 45 DEGREE 80.0 46.1 28.~~72.0 72.0 1.5 1~5 001-PSLNOZ TABLE NO.2

,~

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION 1NTERVAL INSERVICE INSPECTION RELIEF REQUEST NQ.t 4 4.Limitations to coverage of the ASME Code Required E:<amination Volumes were due to component configuration and near surf ace interf ace noise.These limitations are identified in figures and tables provided in this request for relief.The limitations were minimi ed to the ma;<imum e:<tent possible.In all cases where limitations were e:<perienced, the e<aminations were supplemented by additional scans using alternate sound beam components to enhance overall coverage.5.The extent of e:<amination volume achieved ultrasonically and the alternate scans performed coupled with the system pressure tests provide assurance of an acceptable level of qual i ty and safety.E.ALTERNATE EXAMINATIONS')

Conduct Mechanized Ultrasonic Examinations to the extent practical within the limitations.

2)Perform as required supplemental beam angles to maximize the percentage of code required volume achieved., 3)periodic System Leakage tests per Table IWB-2500-1 4)Inservice Hydrostatic test per Table IWB-2500-1 F.IMPLEMENTATION SCHEDULE j SECOND INSERV ICE INSPECT IQN INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1998 8.ATTACHMENTS'01-PSLNOZ INLET AND OUTLET NQZZLE LIMITATIONS ST.LUCIE NUCLEAR POWER PLANT UNIT NO~1 SECOND INSPECTION INTERVAL INBERV1CE INSPECTION RELIEF REQUEST NO~: 5 A.COMPONENT CLASSIFICATION:

Class 1 Full Penetration Welds of Nozzles in Vessels-Program 8-Pressurizer (Top and Bottom head)B.EXAMINATION REQUIREMENTS:

EXAM CAT.ITEM NO.EXAMINATION REQUIREMENTS B-D 83.110 Volumetric e<amination to include BZ.120 essentially 100/o$the weld length.These e:<aminations performed during each interval.'shal l inspection C.REI IEF REQUESTED'elic+

is requested-From the ABME Boiler and Pressure Vessel Code required volume due to the following:

(1)Configuration and permanent attachments prohibit 100/ultrasonic e;<amination coverage oW the required examination volume.

ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAt INSERV ICE INSPECTION RELIEF REQUEST NO.t 5 Relief is requested for the following welds: COMPONENT IDENTIFICATION WELD DESCRIPTION SV-A SAFETY NOZZLE LOCATED AT 180 DEGREES RELIEF NOZZLE LOCATED AT 225 DEGREE SAFETY NOZZLE LOCATED AT 270 DEGREES SAFETY NOZZLE LOCATED AT 305 DEGREES SPRAY NOZZLE CENTER OF HEAD SURGE NOZZLE CENTER BOTTOM HEAD D.BASIS FOR RELIEF: 10 CFR 50.55 a<g)(4)recognizes that throughout the service life of a nuclear power facility, components which are classified as ASME Code Class 1 shall meet the requirements, except design and access provisions requirements, set forth in Section XI, to the e:<tent practical within the limitations of design, geometry and materials of construction of the components.

2.Configuration and permanent attachments prohibit 100/ultrasonic examination coverage of the required code volume.Additional ultrasonic techniques are employed, where practical, to achieve the code required volume.Described below, by weld description, denotes the limitations encountered and those-additional techniques employed to compensate for those areas where CRV could not be effectively covered.

ST.LUCIE NUCLEAR PQNER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NQ.: 5 a.PRESSURIZER TQP HEAD NOZZLE WELDS The NOZZLE TO SHELL NELDS are obstructed from code required volume for the following reasons: 1.The required scan path for each of the nozz les is appro:<imately 12" for the 0 and 60 degree angle.Because of the close proximity of the nozzle arangements to each other the 12 inches scan path cannot, be achieved.See drawing no.001-PRZ f or obstructions.

b.PRESSURIZER BQTTQN MEAD NOZZLE NELDS 1.Ten Pressurizer Heater Penetrations on the Bottom head limit the scan distance for the 60 degree angle only.See drawing 001-PRZ-1 For scan limitations.

4~Limitations to coverage of the ASNE Code Required E;<amination Volumes were due to component configuration and interference by vessel attachments.

These limitations are identified in figures and tables provided in this request for relief.The limitations were minimized to the ma<imum e<tent possible.In all cases where limitations were e<perienced, the examinations were supplemented by additional scans using alternate sound beam components to enhance overal l cover age.5.The e<tent of examination volume achieved ultrasonically and the alternate scans performed coupled with the system pressure tests provide assurance of an acceptable level of quality and safety.

ST.LUCIE NUCLEAR POWER PLANT UNIT NO.SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.<5 E.ALTERNATE EXAMINATIONS!

1)Conduct VOLUMETRIC Ultrasonic Examinations to the extent practical within the limitations.

2)Perform as required supplemental beam angles to maximize the percentage of code required volume achieved.3)periodic System Leakage tests per Table IWB-.500-1 4)Inservice Hydrostatic test per Table IWB-2500-1 F.IMPLEMENTATION SCHEDULE!SECOND INSERVICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1998 8.ATTACHMENTS:

001-PRZ PRESSURIZER NOZZLE LIMITATIONS TOP OF PRZ 001-PRZ-1 PRESSURIZER BOTTOM HEAD LIMITATIONS ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INBERVICE INSPECTION RELIEF REQUEST NO.: 6 A.COMPONENT CLASSIFICATION!

CLASS 1 CODE CATEGORY B-J PRESSURE RETAINING WELDS IN PIPING NOMINAL PIPE SIZE EQUAL TO OR GREATER THAN 4 INCHEB NOZZLE TO PIPE TRANSITION WELDS B.EXAMINATION REQUIREMENTS:

CODE CATEGORY EXAMINATION REQUIREMENTS B9.11 B9.~~1 C.RELIEF REQUESTED'he e:<aminations performed during each inspection interval shall caver the circumference of 100/of the weld.Piping wel ds require valumetric and surface e:<amination methods.The area subject to e;<amination is identif ied in IWB-500-8, See figure no.001-PIPEBJ far examinatian requirements.

Relief is requested from the ABME Code required surface area utilizing the surface e;<amination methad.D.BASIS FQR RELIEF: i.Perf ormance of Pressure Nazzle e)<cessive costs)no campensating saf ety.these evaminatians on the Reactor ta pipe transition weld invalves manhours and man/rem with little or increase in the level of quality and 2.Section XI has reduced the volumetric portion of the e;<amination volume to the inner ane-third af the wal l thickness (see f igure no.001-PIPEBJ

), and stil l requires the surface e<amination af the autside surface (see f i gure no.001-PIPEBJ

).In most cases, this i s the most efficient and less expensive way af e;<amining these welds.In the case of the Main Reactor Coolant piping this is nat.the case due to the size of the piping, location of the welds (access), manrem e:<posure due to the close pro:<imity of the RPV, the cost af insulation removal, erecting scafolding, not to mention the increased time of the e;<aminer to canduct the surf ace examinations.

ST.LUCIE NUCLEAR PONER PLANT UNIT 1 SECOND INSPECTION INTERVAL lNSERVICE INSPECTION RELIEF REQUEST NO~s 6 Florida Power and Light Company feels'hat the extent of examinations conducted and the volume achieved along with the proposed ultrasonic e<amination in lieu of the surface e;<am will provide assurance of an acceptable level of Quality and Safety.E.ALTERNATIVE EXANINATIONS AND TESTS 1~Conduct volumetric e:<aminations from the inside surface of the Reactor Pressure Vessel during the Nechanized RPV ultrasonic e:<aminations of the noz"les, exam category B-D, and the remainder of the Nozzles welds at or near the end of the inspertion interval in conjunction with the RPV mechanized e<aminations.

2.Conduct a full volumetric ultrasonic e<amination technique to effectively examine the outside surfaces of the Reactor Vessel Nozzle Pipe to Transition welds, (OUTLET and INLET)from the I.D.surface (Figure No.001-PSLNOZ) in lieu of the surface examinations as def ined in the proposed attachment to this relief request.3.Conduct system pressure tests as required by the St.Lucie Inservice Pres ure Test Program.4~The extent of e:<amination required and the proposed e;<am coupled with the system pressure tests provide assurance of an acceptable level of qual ity arid saf ety.F.INPLENENTATION SCHEDULEc SECOND INSERV ICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1998 The outlet nozzle pipe to transition welds to be e<amined by the end of the First period, in conjunction with the category B-D examinations.

The inlet nozzle pipe to transition welds to be examined with the mechanized e<aminations at or near the end of the inspection interval.

ST.LUCIE NUCLEAR POWER PLANT UNIT i SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.i 6$.ATTACHMENTSI 00l-P IPEBJ 00i-PSLNOZ ATTACHMENT CODE REQUIRED EXAMINATION VOLUME AND SURFACE EXAM REQUIREMENTS TYPICAL WELD CONFIGURATION (PSL)ALTERNATE VOLUMETRIC EXAMINATION ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST NO.: 6 BT.LUCIE NUCLEAR POWER PLANT ATTACHMENT ALTERNATE VOLUMETRIC EXANINATION OF THE BT.LUCIE PLANT UNIT NO.i and 2 OUTLET AND INLET PIPING WELDB TO BE USED IN LIEU OF THE SURFACE EXAMINATION REQUIREMENTS ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.i 6 BACKGROUND TO PERFORM ULTRASONIC WELD EXAMINATIONS, THE ULTRASONIC SEARCH UNIT IS APPLIED TO THE PIPE BASE METAL ADJACENT TO THE WELD~ANGULATION WEDGES CAUSE THE ULTRASONIC BEAM TO REFRACT AT THE PIPE SURFACE AND PROPAGATE INTO THE WELD AT A PREDETERMINED ANGLE.AS THE ULTRASONIC BEAM PASSES THROUGH THE PIPE WALL AND THE VOLUME OF THE WELD METAL, THE ULTRASONIC INSTRUMENT DISPLAYS ECHOS FROM THE REFLECTING SURFACES.THE DEGREE OF SUCESS DEPENDS ON THE EXAMINATION MATERIAL, THE STRENGTH OF THE ULTRASONIC BEAM, AND BEAM ANGLE WITH RESPECT TO THE ORIENTATION OF THE REFLECTING SURFACE.ONE HRLF VEE PRTH F l GURE NO.1 ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 6 WHEN FULL VOLUME EXAMINATIONS ARE REQUIRED, THE ULTRASONIC BEAM IS MONITORED DURING THE ENTIRE BEAM PATH, i.e.ENTRY TO INSIDE SURFACE INPINBEMENT.

CONDITIONS PERMITTING THE BEAM IS FURTHER MONITORED AFTER IT REFLECTS AT THE INSIDE SURFACE AND CONTINUES TO PROPAGATE IN A VEE PATH TOWARD THE OUTSIDE SURFACE.FULL VEE PRTH FIGURE NO.2 ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.c 6 DURING PROPAGATION THE ULTRASONIC BEAM EXHIBITS THREE MAIN CHARACTERISTICS DIVERGENCE, ATTENUATION, AND SCATTERING.

THE ESTABLISHMENT OF A DISTANCE AMPLITUDE-CORRECTION DURING CALIBRATION WILL GENERALLY COMPENSATE FQR THESE BEAM CHARACTERISTICS, TO A DEGREE.A FOURTH, RECENTLY RECOGNIZED CHARACTERISTIC IS THE FACT THAT ENTRY SURFACE"NOISE" CAUSES A"BLIND ZONE" IMMEDIATELY UNDER THE ULTRASONIC SEARCH UNIT.THIS BLIND ZONE CONTAINS A MULTITUDF QF ENTRY SURFACE SIGNALS FROM;THE ANGULATION WEDGE, THE COUPLING MATERIAL, SURFACE IRREGULARITIES, AND FROM THE EXAMINATION MATERIAL GRAIN STRUCTURE.

DEPENDING ON THE EXAMINATION PARAMETERS, THIS BLIND ZONE CAN REPRESENT FROM A FEW MILS TQ AS MUCH AS AN INCH OF THE ULTRASONIC BEAM PATH WHERE FLAWS COULD EXIST UN-NOTICED.

BLIND ZONE FIGURE NO.3 ST.LUG IE NUCLEAR POWER PLANT UNIT i SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.t 6 THERE ARE TWO WAYS TO ENHANCE THE EXAMINATION OF THE ENTRY SURFACE.THE MOST COMMONLY EMPLQYED TECHNIQUE IS TO EXTEND THE ULTRASONIC CALIBRATION TO A FULL VEE PATH OR BEYQUND.THIS ALLOWS THE OBSERVATION OF THE OUTSIDE SURFACE IN A RELATIVELY NOISE-FREE SEGEMENT OF THE ULTRASONIC BEAM.(FIGURE NO~2)SECOND, THE SIMPLEST AND LEAST EXPENSIVE APPROACH, WOULD BE TO EXAMINE THE OUTSIDE (ENTRY)SURFACE WITH ANOTHER NDE METHOD.THUS, WE RELY ON THE ULTRASONIC METHOD ONLY FOR THAT PORTION OF THE EXAMINATION VOLUME WHERE IT HAS PROVEN RELIABILITY.

THIS IS THE ESSENCE OF THE ASME SECTION XI EXAMINATION REQUIREMENTS.

EVEN THOUGH THE ULTRASONIC PORTION OF THE EXAMINATION VOLUME HAS BEEN REDUCED TO THE INNER QNE-THRID OF THE WALL THICKNESS, FIGURE NO.4 THE SURFACE EXAMINATION QF THE OUTSIDE SURFACE IS STILL MANDATED.FIGURE NO.5 FOR MOST PIPING WELDS THIS APPROACH IS Tl-lE SIMPLEST AND LEAST EXPENSIVE, BUT THIS IS NQT SO WHEN APPLIED TO THE REACTQR VESSEL NOZZLE-TQ-PIPE WELDS.BECAUSE OF THEIR LOCATION, THESE WELDS POSE UNUSUAL PRQBLEMS.ST.LUCIE NOZZLE TO PIPE TRANSITION WELD PROBLEMS i.SCAFFOLDING IS NOT POSSIBLE, QR OF LIMITED VALUE 2.MAN-REM EXPOSURE IS HIGH (5 MAN"REM)THE REMOVAL QF THE INSULATION IS VERY COSTLY ST.LUG IE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 6 FPL PROPOSES THE UBE OF STATE-OF-Tl-IE-ART ULTRASONIC EXAMINATION TECHNIQUES TO EFFECTIVELY EXAMINE THE OUTSIDE SURFACE OF THE REACTOR VESSEL NOZZLE-TO-PIPE TRANSITION WELDS.THIS EXAMINATION WILL ACCOMPLISH MORE THAN THE CURRENT SURFACE EXAMINATION BEING PERFORMED AT ST.LUCIE.THE ULTRASONIC EXAMINATION WILL INVESTIGATE THE OUTSIDE SURFACE OF THE WELDS IN TWO DIRECTIONS CIRCUMFERENTIALLY AND IN TWO DIRECTIONS AXIALLY COVERING l00%OF THE WELDS PLUS ONE INCH QN EACH SIDE.NOZZLE R i/3 T PIPE D i/9 IN C 1/'t EN..ERRI1INRTION VOLUI1E R-B-C-D FIGURE NO.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NQ.t 6 A HIGH RESOLUT ION 45 DEGREE SHEAR WAVE ULTRASONIC EXAMINATION WILL BE PERFORMED QN THE WELDS WITH THE EXAMINATIQN SENSITIVITY ESTABLISHED USING 2/T DEEP NOTCHES.ULTRASON I C EXAMINATION THIS EXAMINATION WILL BE PERFORMED TO DETECT UNACCEPTABLE OUTSIDE SURFACE FLAWS THAT WOULD HAVE BEEN DETECTED USING SURFACE EXAMINATION TECHNIQUES QN THE OUTSIDE SURFACE.THIS APPROACH WILL ALLOW EXAMINAT ION QF THE ENTIRE CIRCUMFERENCE OF THE WELD WHILE ALSO SAVING A SIGNIFICANT AMOUNT OF RADIATION EXPOSURE BY ALLEVIATING THE NEED FOR MANUAL EXAMINATIQN QF THE OUTSIDE SURFACE.E><RN I NRT I GN RRER E-F 1/2" I/2" PIPE E><RNI NRT I ON RRER FIGURE NO.5 10 ST.LUC IE NUCLEAR PONER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NQ.: 6 ONE RND ONE HRLF VEE PRTH'l GURE NO.7

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST No.7 A.COMPONENT CLASS IF I CAT ION!Class 1 Manuf acturer-Byron Jackson Type pump-DFSS Si"=e-35 x 35;<43 Component-REACTOR COOLANT PUMP B.EXAMINATION REQUIREMENTS!

II EXAM CAT.ITEM NO.EXAMINATION REQUIREMENTS B-L-1 B12.10 Volumetric examination, to include 100/of pressure retaining welds, of one pump in each group of pump~performing similar function~in a system.The examinations shall be performed during each inspection interval, and maybe perf ormed at or near the end of the inspection interval.B-L-2 812~20 Visual e<amination of the internal pressure boundary surface on one pump in each of the group of pumps perf orming similar functions in the system during each inspection interval.The e:<aminations maybe performed at or near the end of the i nspecti on interval.RELIEF REQUESTED:

II Relief is requested from the ASME Code required examinations for the f ol lowing: 100/volumetric examination of the reactor coolant pump casing welds.AND 2.100/visual examination of the reactor coolant pump interior pressure boundary surface.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST No.7 Relief is requested for the following components:

PUMP IDENTIFICATION SERIAL NUMBER R.C.NUMBERS 1A1 1A.181 1B2 681-N-0445 681-N-0446 681-N-0447 681-N-0448 34356~4981 u498>34983 D.BASIS FOR RELIEF: GENERAL St.Lucie Nuclear Power Plants, Unit No.1, has reactor coolant pumps which were manufactured prior to the initial issuance of the ASME Boiler and Pressure Vessel Code,Section XI and the design did not provide for the disassembly and removal of fi:<ed internals.

The pumps were designed to provide reliable service for the plant lifetime without internal maintenance or inspection.

The impracticality of performing these e;<aminations is not unique to St.Lucie, and has initiated generic studies to evaluate the need for inspection and to develop specific examinat i on techni ques.To date, no technique has been qualif ied and proven practical for performing inservice inspection's of the Type E pump design.DISASSEMBLY 8c REASSEMBLY The disassembly and reassembly of the pumps is e;<tremely di f f i cul t given the i nter f erence and/or tight f i ts which need to be addressed.

Without painstaking care, the disassembly

/reassembly process could degrade the pump internals from an operatianal standpoint.

There is a very low probability, based upon e:<perience, to disassemble pump(s)soley for maintenance purposes.There is no requirement by the pump manufacturer (Byron Jackson)to disassemble the pump(s)as part of normal maintenance or inspection.

Accordingly, Florida Power 5 Light Company's procedures do not r equire disassembly of the pump (s)f or maintenance or inspection purposes.There is no reported failures within the pump casings with these model pump(s).Operating experience with these pumps to date has validated the designer's intent to provide for service free of major disassembly.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST No.7 EXAMINATIONS RADIOGRAPHIC CONVENTIONAL The presence of the di f f user vanes (Fi g.No.1)precludes conventional radiography, in that the vanes prevent placement of the RT f i lm casset tes insi de the pump (as does the radiation field in terms of the radiographic film and personnel radi at i on e;<posure)

.Placement of the film on the outside of the pump is feasible, but there is no radiographic source suitable for placement inside the pump.Standard isotopic radiation sources are too weak to penetrate the thick casting and background radiation from the inside surface of the pump would diminish sensi ti vi ty.Special strong isotopic sources would be impractical to handle and position in-ide the pump without special designed handling equipment and not to mention personnel radiological exposure from the radiographic source itself.MINIATURE LINEAR ACCELERATOR (MINAC)The Miniature Linear Accelerator was considered, but the Type E pump design precludes positioning of the accelerator inside the pump.Double wall radiography utilizing the MINAC has also been considered with some hope of attaining meaningful radiographs of a portion of the casing welds.This technique has not been qualified to date and appears to be some time off, if at all possible.To per f orm thi s e<aminati on, large expenditures of manhours and man-rem are required.Based on actual data compiled from the radiographic examination of the Turkey Point Unit No.reactor coolant pumps casing welds and the visual e'<amination of the internal pressure boundary surface on one pump, in e<cess of 5900 manhours and 46 man-rem exposure was e:<pended in the disassembly, e:<aminations and reassembly o-f the pump.This data does not include engineering time or pre-outage job planning, nor does it include radiation protection personnel that required direct coverage and the posponement of work activities in other areas of the containment building due to the amounts of radiation being produced during the conduct of the radiography exposures of the casing welds.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST No.7 ULTRASONIC EXAMINATION Ultrasonic e<amination is not feasible due to the material construction of the pump casing.The pump casing is fabricated from cast stainless steel (ASTM AZ51, Grade CFSM).The material is essentially a cast-type 316 stainless steel.The coarse grain structure inherent in thick stainless steel castings preclude the use of conventional ultrasonic e;<aminations.

Future developments in ultrasonic examination techniques may provide a method to e:<amine thick stainless steel castings.When and if a major breakthrough in ultrasonic e:<amination techniques is made that satisfies the examination requirements of the ASME code Florida Power 4 Light will comply with the intent of.the code LIQUID PENETRANT METHOD Florida power 8.light Company has considered using the liquid penetrant method of examination as a alternate to>>the volumetric examination referenced in the code, but rejected this method based on the following:

Because of the porus condition of the casting surface of the weld ones, considerable surface smoothing will be required in order to enable meaningful examination and interpretation the results.Such weld su/"f ace f inishing operations,, if not performed prior to the preservice inspection, will be e:<tremely difficult at the time of the inservice inspection.

To further complicate the surface smoothing pr ocess, St.Lucie's pumps have been operational since 1976, and at that time the insul ati on used on these pumps was abestos.The surface preparation would require personnel to conduct this process in a closed area with respirators, and be directly monitored by health physics personnel to control the spreading of contaimination to other areas within the containment building.The reccommended method of penetrant is the water-washable type, using this method would require a sufficient water supply, a'method of containing the water and disposing of the run offs after removal of the penetrant ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST No.7 The solvent-removable type penetrant method was rejected due to the si="e of the pump and the surface roughness waul d entrap the penetrant thereby enable meaningful examination and interpretation of the results.Using this method would also require excessive manhours and man-rem.CODE REQUIREMENTS The examination requirements for pumps (Figure IWB-2500, AGEE Code,Section XI)were originally developed for Type F, radially split, a<isymmetric casing designs.Bt.Lucie Plant has Type E pump designs (Fi g.No.2)which have geometric configurations that.make e<amination's of the casing welds not practical or meaningf ul to perform under the current code requirements.

Florida Power 4 Light Company feels that adequate safety margins are adherent in the basic design.The structural integrity aFforded by the e<isting pump casing material will not significantly degrade over its lifetime.Pump casings are generally overdesigned (because oF added wall thickness) to provide stabili ty under operating load.Operating stresses in the pump casings, are well below the levels associated with vessels, therefore with lower operating stresses, fatigue l i f e is signif icantly improved.Florida Power and Light Company feels that the satisfactory'nspection results achieved on our Turkey Point Plant in 1'782, coupled with the same results conducted by (3)other utility company's will provide the additional assurance as to the pump's casing integrity.

E.ALTERNATE EXANINATIONBi As a alternate to the e:<amination,s required by the code, Florida Power 5 Light Company proposes the following:

1.A 100/visual e<amination of 0he pump interior to the extent practical (recoginizing the interference by the vanes)(Fig.No.1)should the pump be disassembled for maintenance.

2.A 100/Radiographic e:<amination of the pump casing welds to the extent practical (recogni=ing the interference by the vanes)should the pump be disassembled for maintenance.

ST.LUCIE NUCLEAR POWER PLANT UNIT 1 SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST No.7 The reactor coolant pump shall be hydrostatical ly tested-per the requirements of the ASME Boiler 4~Pressure Vesssel Code.A 100%visual evamination of the external surfaces only, of one<1)pump, and one (1)weld at or near the end af the inspect i on interval.The alternate e;<aminations and tests provide assurance of an acceptable level of quality and safety.F.IMPLEMENTATION SCHEDULE At or near the end of the inserv'ice inspection interval.Interval dates: 11 Feburary 1988 to 11 Feburary 1998 G ATTACHMENTS TQ RELIEF REQUEST NO.7 FIGURE NO.1 HORIZONTAL CROSS SECTION OF PUMP FIGURE NO~2 VERTICAL CROSS SECTION OF PUMP FIGURE NQ.Z PUMP WEI D LOCATION ST~LUCIE NUCLEAR POWER PLANT UNIT NQ.SECOND INSPECTION INTERVAL INSERV ICE INSPECT IQN RELIEF REQUEST NO.: 8 A.COMPONENT CLASSIFICATION:

CLASS 1 CODE EXAMINATION CATEGORY 8-M-2 VALVE BODY, EXCEEDING 4 IN.NOMINAL PIPE SIZE B.EXAMINATION REQUIREMENTS:

B12.50 Perform VT-3 visual e',<ami nat 1 on of the internal surface of one valve within each group of valves that are of the same constructional design.(such as globe, gate or check valve)and manuf acturing method, and perf orm similar.functions in the system (such a" containment isolation and system overpressure protection).

C.RELIEF REQUESTED:

Relief is requested from the disassembly of these valves for the sole purpose of performing a visual examination.

SIZE Q I I Q I I g I I~6" g I I Q I I Q I I Q I I Q I I Q I I Q I I+I I 12" 1+II]0 ll 1 0 I I 1 0 II 1 0 II 1 gll j.2ll 1+II 12" SYSTEM RC RC RC SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI SI VALVE ID V-1200 V-1201 V-1202 HCV-3615 HCV-3625 HCV-3635 HCV-3645 V-3114 V-3124 V-3134 V-3144 V-3217 V-3227 V-3237 V-3247 V-3480 V-3481 V-3651 V-365'-3614 V-3624 V-3634 V-3*44 TYPE SAFETY SAFETY SAFETY GLOBE GLOBE GLOBE GLOBE CHECK CHECK CHECK CHECK CHECK CHECk>>CHECK CHECK BATE GATE GATE GATE BATE BATE GATE GATE ST~LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 8 D.BASIS FOR RELIEF'isassembly of these valves f or the sole purpose of performing a visual (VT-3)e:<amination is not practical.

The process of disassembling these components will result in considerable e:<posure of personnel to radiation and significantly increase the risk of component damage or failure without providing a compensating increase in the l evel of qual i ty and saf et.y.E.ALTERNATE EXAMINATIONS:

1)Conduct a visual (VT-3)e:<amination in accordance with the requirements of table IWB-2500-1, category B-M-2 in the event the components are disassembled for maintenance or repair.2)Periodic inservice testing per subarticle IWV->400 and or IWV-3520 (valves)or 3)Periodic system leakage tests per category B-P, table IWB-2500-1 4)The alternative tests and evaminations provide an assurance of acceptable quality and safety.F.IMPLEMENTATION SCHEDULEc SECOND INSERV ICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1988 G.ATTACHMENTSc ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST NO.: A.COMPONENT CLASSIFICATION:

CLASS 2 CONTAlNMENT SPRAY SYSTEM PRESSURE RETAINING WELDS IN PIPING, 1/2" OR LESS B.EXAMINATION REQUIREMENTS'XAM CAT.ITEM NO.EXAMINATION REQUIREMENTS C.RELIEF REQUESTED!

C5.10 C5.11 C5.12Perform a surf ace e:<amination of 100%of each circumf erential weld requiring e:<amination.

Per f orm a sur f ace e:<ami nati on of 2.5 t at intersecting circum f erenti al wel d.Relief is requested from the surface examination requirements for the following lines.I."6-CS-16 I I-6-CS-17 I-10-CS-12 I-10-CS-13 I-12-CB-18 I-12-CS-19 I-6-CS->0 I-6-CS-21 I-6-CS-22 I-6-CS-23 I-6-CS-24 I-6-CS-25 I-6-CB-28 l-6-CS-29 Drawing 001-CB, attached provides a PAID of those line~that are 1)Affected, 2)evempt and.)those lines to be evamined.

ST.LUCIE NUCLEAR PONER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: D.BASIS FOR RELIEF: 1>The containment Spray System piping is not required to operate during normal operation 2>Following initial inspection and testing, the Containment Spray piping downstream of the second isolation valve outside containment is subjected to no pressure transients and no temperature transients other than ambient containment building/auxiliary building pressure and temperature, thus, there is no mechani sm f or f ai lure f 3)ASME Section XI, Table INC-2500-1, E;<amination Category C-H, Note 1, e;<empts open ended portions of systems from the Visual (VT-2)evamination.

E.ALTERNATE EXAMINATIONSc 1)At least once every five (5)years, the piping is tested by performing an air or smoke flow test through each spray header to demonstrate an open flow path.(reference ASME Section XI, INC-5222(d)

.2)In the event that the containment spray system is operated or in the case of a significant seismic event, FPbL will evaluate this Relief Request to determine if additional nondestructive e:<aminations are warranted.

3)The alternative tests and e<aminations provide an assurance of acceptable quality and-afety.F~IMPLEMENTATION SCHEDULE: SECOND INSERVICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1988 G.ATTACHMENTS:

001-CS CONTAINMENT SPRAY PIPING DRAWING ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION lNTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 10 A.COMPONENT CLASSIFICATION:

CLASS 1, 2 AND ASME SECTION XI, 1983 EDITION THROUGH SUMMER 1983 ADDENDA 1 WF-5000 INSERV I CE TEST REQUIREMENTS MECHANICAL AND HYDRAULIC SHOCK ARRESTORB (BNUBBERS)

B.TEST I NB REQUIREMENTS!

IWF-5400(c)

-Snubbers that fail the inservice test requirements of IWF-5400 shall be repaired in accordance with IWF-4000 and retested.An additional sample of 10/of the total number of snubbers shall be tested at that time.Additional sample testing shall be continued until all units within the sample have met the requirements of (b)above.C.RELIEF REQUESTED!

Relief is requested from the additional sample of 10/of the total number of nonexempt (IWF-1.30) snubbers.D.BASIS FOR RELIEF: i.The Code requirements to test an additional 10%of the total snubber population in the event of a f ai lure does not take into account the di f f erence in the operating character istics of different types of snubbers and their relative susceptibili ty to various service-induced failure mechanisms.

2~There are substantial di f f erences, based on manuf acture and design, specifically in functional operation and dynamic response of the load of snubbers.A snubber of one design may tend toward failure under a given set of conditions while a snubber of a different design may be essentially unaf f ected by the same condition.

In addition to item 2 above, conditions which lead to the failure of a susceptible snubber may sometimes be demonstrated to be consistent with conditions unique to the system in which it is installed.

ST.LUC IE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 10 Failure evaluation may indicate that snubbers of a certain t:ype have a tendency to fail when exposed to a'ertain combination of temperature and vibration.

When this evaluation clearly establishes that this failure exists only in a certain system, then it becomes evident that the additional sample should be taken from the susceptible population.

Snubbers of the same type in other syst:ems, t hat are exposed to different operating conditions, should be adequately addressed in the original test sample.The NRC Standard Technical Specif ication for Combustion Engineering requires testing of the additianal 10%of the snubber population to be conducted on the same type of snuber as the snubber that failed.Florida Power and Light Company feels that the additional sampling as required by Il4F-5400(c) does not adequately provide for a realistic level of confidence for locating and correcting conditions as described above.7~Florida Power and Light Company feels that these alterhative sampling methods described below are consistent with the NRC position as evidenced by the Combustion Engineering Standard Technical Specif icati one E.ALTERNATE EXANINATIONS:

Conduct a visual (VT-3)examination of all snubbers during each refueling outage.During the scheduled functional test, if a snubber failure is identified, an additional 10/sample of the same type of snubber as that which failed will be tested as r equi red by plant.technical specifications.

An engineering evaluation shall be made of each failure to meet the functional test acceptance criteria to determine the cause of the failure.The I esults of this evaluation shall be used, if applicable, in selecting snubbers to be tested in an effort to determine the operability of other snubbers irrespective of type which may be subject to the same failure mode.

ST.LUClE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO~: 10 4)Should the results of the evaluation indirate that f ai lure was caused be ei ther manuf acturer or design def iciency, further action shall be taken, if needed, based on manufacturer or engineering recommendations.

5)The alternative e:<aminations and tests provide assurance of an acceptable level of quality and safety.F.IMPLEMENTATION SCHEDULE: SECOND INSERVICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1988 8.ATTACHMENTS'one BT.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.!11 A.COMPONENT CLASSIFICATION!

CLASS 1 and CLASS 2 CODE EXAMINATION CATEGORY N/A ULTRASONIC CALIBRATION BLOCKS ASME SECTION XI, APPENDIX I I I B.EXAMINATION REQUIREMENTS>

III-3400 The basic calibration blocks shall be made fr om the same nominal diameter and naminal wall thickness or pipe schedule as the pipe to be el<ami ned I I I-3411 The calibration block shall be f abri cated f r om one af the materials specif ied f ar the piping being joined by the weld.C.RELIEF REQUESTED:

Relief is requested from the ASME Cade, Appendi;<III, requirements, I'l-3400 AND III-3411 which requires 1)the calibration block to be the same nominal diameter and wall thickness or pipe schedule and 2)be fabricated fram ane of the same materials as the piping being joined.Relief is requested for the fallowing:

CAL.BLOCK I.D.NUMBER UT-4A UT-S UT-45 COMPONENT DESCRIPTION PRIMARY COOLANT PIPING HOT LEG PRIMARY COOLANT PIPING COLD LEGS MAIN STEAM PIPING NELDS DEVIATION FROM CODE THE BLOCK IS NOT CURVED DIFFERENT MATERIAL THE BLOCK IS NOT CURVED DIFFERENT DIAMETERS DIFFERENT THICKNESS UT-4 REACTOR PRESSURE VESSEL THE 3/4t HOLE IS TOO CLOSE FOR THE STRAlGHT BEAM<0 deg.)EXAM REACTQR PRESSURE VESSEL THE HOLES ARE DRILLED WITHIN 3/4" OF THE END OF THE BLOCK.

BT.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERVICE INSPECTION RELIEF REQUEST NO.: ii D.BASIS FOR RELIEF: 1.UT-4A PRIMARY COOLANT PIPING, HOT LES FPSL has determined that SA-533 Grade A is comparable to SA-516 Grade 70 (piping material), as provided by ASMF Section XI, Appendi:<II I, Article III-3411 (c).Article 5 of the ASME Section V allows flat blocks for items greater than 20 inch diameter, as does Article 4 of ABME Section V.2.UT-6 PRIMARY COOLANT PIPING, COLD LEG The block.material is identical to the coolant piping material, therefore it is preferred over a curved block of different material.Article 5 of the ABME Section V allows flat blocks for items greater than 20 inch diameter, as does Article 4 of ASME Section V~P I'i th a half vee e:<amination technique, curvature is not a major source of error.Bound path calibration is used with full scale plots of indications.

3.UT-45 MAIN STEAM PIPING NELDS The subject piping welds sre of two sizes: a)34" diameter, 1.250" wal 1 b)36.6 5" diameter, 1.234" wall.The ASME cod are such that two blocks, one would be required.requirements of of each diameter c)The wall thickness is essentially the same, therefore there is little or no change in the sensitivity.

d)The small difference in diameter is not ultrasonically noticable.

ST.LUCIE NUCLEAR POWER PLANT UNIT NQ.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECT lQN RELIEF REQUEST NO.: i 1 4.UT-4 AND UT-5 REACTOR PRESSURE VESSEL The, closeness of the 3/4 t hole to the end of the block, satisfies the requirements of the code to which they were f abl 1 cated e The condition noted does not interfere with the calibration performed on these blocks.5.The proposed calibration blocks have been in use since the plant was bui l t, their continued use would tend to provide cons i s tent r esul ts.E.ALTERNATE EXAMINATIONS')

Perform the Code required e:<aminations using the proposed calibration blocks as def ined above.2)Periodic system leakage tests per category B-P, and C-H tables IWB-2500-1 and lWC-2500-1.

3)The alternative tests and e.'<aminations provide an assurance of acceptable quality and safety.I F.IMPLEMENTATION SCHEDULEs SECOND INSERV ICE INSPECTION INTERVAL 11 FEBURARY 1988 TO 11 FEBURARY 1988 G.ATTACHMENTS<

None ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: 12 A.COMPONENT CLASSIFICATION:

Cl ASS 1 NELDS CLASS 2 WELDS SECTION XI 198K EDITION THRU SUMMER 198K ADDENDA TABLES;IWB-2500-1 TABLES;INC-2500-1 B.EXAMINATION REQUIREMENTSc

-CLASS 1 CLASS 2 E:<aminati on volumes and surfaces shall be performed in accordance with the applicable f igures as referenced in Tables INB-2500-1.

E;<amination volumes and surfaces shall be performed in accordance with the applicable f i gures as ref erenced in Tables INC-2500-1.

C.RELIEF REQUESTED:

Relief is requested from the ASME Code,Section XI, Division 1, code required volume and surface e<amination requirements f or Class 1 welds INB-2500 or Class 2 welds INC-2500 that cannot be e:<amined.

D.BASIS FOR RELIEFc 1.10 CFR 50.55a (g)(4)recogni es that throughout the service life of a nuclear power facility, components which are classified as ASME Code Class 1 shall meet the requir ements, e:<cept design and access provisions requirements, set forth in Section XI, to the e:<tent practical within the limitations of design, geometry and materials of construction of the components.

2.St.Lucie Nuclear Plant, Unit No.1, Operating License was issued on March 1, 1976, and the initial Inservice Inspection Program was prepared to meet the ASME Code 1'770 Edition through the Ninter 1970 addenda, which only addressed class 1 components.

Interference by another component or part geometry which reduces the evamination coverage was not taken into consideration for the remainder of the components class 2 and class ST.LUCIE NUCLEAR POWER PLANT UNIT NO.1 SECOND INSPECTION INTERVAL INBERVICE INSPECTION RELIEF REQUEST NO.: 12 3~Interf erences are common throughout the industry for older constructed plants.Even wi th added e:<aminati ons to compensate for these interf erences smal l parts of an e:<amination volume or surface area st i l 1 cannot be fully e:<amined as required by later Editions and Addenda of the code~4.Section XI, does not address or even recogni e relief from any of the code requirements, therefore only the Nuclear Regulatory Commission through 10 CFR 50 can approve reliefs from any of the code requirements.

5.The NRC representatives at the ASME'ommittee meetings e:<pressed concern as to the amount of Utility requests for relieF that they were recieving and the lack of manpower to.r eview and approve these request in an evpiedient manner.6.A proposed ABME Code Case is currently being discussed within the ASME Code committees that would reduce the e:<amination coverage by a certain percentage and still be acceptable for compliance with the code requirements.

To date this Code case has not been issued.7.In order to provide some relief in these areas, FP@L proposes the following alternative action that will not only provide ease to FP8<L and the NRC, but still maintain the required documentation necessary.For enforcement and review of Inservice Inspection obstructions to assul e that the Quality and safety level has not been r educed beyound the minimum standards.

E.ALTERNATE EXAMINATIONS:

1)FPhL proposes that up to a 20/reduction in e:<amination coverage on any given Class 1 or~weld may be accepted provided:

ST.LUCIE NUCLEAR POWER PLANT UNIT NO.i SECOND INSPECTION INTERVAL INSERV ICE INSPECTION RELIEF REQUEST NO.: i2 a)The reduction in coverage is due to access or conf i gurat i on condign i ons.b)The reduction in coverage is required to be for discrete volumes or areas.A general reduction in coverage for the complete length of a weld is not acceptable.

c)The length of any discrete volume or area of missed coverage shall not exceed 8 inches along the weld length or 20/of the total weld length, whichever is less.d)For ultra.onic e<amination, if multiple angles (e.g.0 deg., 45 deg., and 60 deg.)or scan directions

.(e.g.parallel to the weld and perpendicular to the weld)are required, and the examination cannot: be per.formed using all ,the required angles and scan directions, then the e.<amination volumes that missed coverage by any required angle or scan direction shall be included i'n the total volume of missed coverage.e)For volumetric or surface e<amination, the 20/reduction limit applies to the sum of all discrete volumes or areas of missed coverage for each weld.f)When the reduction in coverage is less than.0/, the coverage of greater than 80/is assumed to be essentially 100%, and acceptable by the code.2)When the reduction in coverage is equal to or greater t:han 20/, A relief request shall be filed with the Regulatory Authority pursuant to the requirements of i0 CFR 50.55 a.3)When the reduction in coverage is less than.0/, the r eduction in coverage shall be fully document:ed in a format consistent wi th the-format f or a rel i ef and included within the applicable Inservice Inspection Program in accordance with IWA-6000.

ST~LUCIE NUCLEAR POWER PLANT UNIT NO.SECOND INSPECTION INTERVAL INBERV ICE INSPECTION RELIEF REQUEST NO.: 12 4)Qn'a periodical bases all documented reductions in coverage shall be submitted to the Regulatory Authority as part o.F the Program update submittal.

5)Periodic system leakage tests per category B-P, and C-H tables INB-2500-1 and INC-2500-1

~6)The alternative tests and e:<aminations provide an assurance of acceptable quality and saFety and assure the that all reductions in coverage are documented and included in evisting programs as required by ASNE Code.a F.INPLENENTATIQN SCHEDULE!SECOND INSERV ICE INSPECT I QN INTERVAL 11 FEBURARY 1988 TQ 11 FEBURARY 1988 B.ATTACHNENTSt

4.0 EVALUATION

CRITERIA 4.1 Acceptance Standards-Class 1 Class..1 examination acceptance standards are in accordance with the requirements of ASME Section XI 1983 Edition, through and including the Summer of 1983 Addenda-Examination C t o B-A B-B B-D B-E B-F B-G-1 B-G-2 B-J B-K-1 B-L-1, B-M-1 B-L-2, B-M-2 B-N-1, B-N-2 B-N-3 B-0 B-P B-Q Components and Part n d Welds in Reactor Vessels Welds in Other Vessels Vessel Nozzle Welds Partial Penetration Welds in Vessels Dissimilar.

Metal Welds Bolting)2" in Diameter Bolting<or=to 2" Diameter Integral Attachments for Vessels Welds in Piping Integral Attachments for Piping Pumps, and Valves Welds in Pump casings&, Valve Bodies Pump Casings 5 Valve Bodies Interior Surfaces&Internal Components of Reactor Vessels Control Rod Drive Housing Welds All Pressure Retaining Components Steam Generator Tubing Acceptance S a d IWB-3510 IWB-3511 IWB-3512 IWA-5250 IWB-3514 IWB-3515 IWB-3516 IWB-3514 IWB-3516 IWB-3518 IWB-3523 IWA-5250 2 IWB-3521 4 ASME Section XI Acceptance Standards are in the course of preparation,use Mfg.Code&, Applicable Standards.

28

..4.~Acceptance Standards-Class 2 Class 2 examination acceptance standards are in accordance with the requirements of ASME Section XI 1983 Edition, through and including the Summer of 1983 Addenda.Article IWC-3000, Acceptance

'Standards for Flaw Indications, are in course of preparation.

The rules of IWB-3000 may be used.Examination Ca o C-A C-B C-C Components and Part d Welds in Pressure Vessels Vessel Nozzle Welds Integral Attachments for Vessels Piping, Pumps, and&, Valves Acceptance S an a IWB-3511 IWB-3512 IWB-3516 C-D C-F C-G Oc-H Bolting>than 2" Welds in Piping Welds in Pumps and Valves All Pressure Retaining Components IWB-3515 IWB-3514 IWB-3518 IWA-5250

4.3 Acceptance

Standards-Class 3 Class 3 examination acceptance standards are in accordance with the requirements of ASME Section XI 1983 Edition, through and including the Summer of 1983 Addenda.Article IWD-3000, Acceptance Standards for Flaw Indications, are in course of preparation.

The rules of IWB-3000 may be used.Examination Components and Par't Acceptance D-A D-B D-C Integral Attachment Welds on Systems in Support of Reactor Shutdown Function Pressure Retaining Components Integral Attachment Welds on Systems in Support of ECC,CHR Atmosphere Cleanup,and RHR Pressure Retaining Components Integral Attachment,Welds on Systems in Support of Residual Heat Removal from Spent Fuel Storage Pool Pressure Retaining Components IWB-3516 IWA-5250 IWB-3516 IWA-5250 IWB-3516 IWA-5250 30

4.4 Acceptance

Standard for Supports-Class 1,2,&, 3 The acceptance standards for the examination of Class 1, 2, and 3 supports are in accordance with the requirements of ASME Section XI, 1983 Edition, through and including the Summer 1983 Addenda as follows: 4.4.1 Acceptance Standards IHF-3400-Component Support Structural Integrity (a)Component support conditions which are unacceptable for continued service shall include the following; 1)deformations or structural degradations of fasteners, springs clamps, or other support items;2)missing, detached, or loosened support items;3)arc strikes, weld spatter, paint, scoring, roughness, or general corrosion on close tolerance machined or sliding surfaces;4)fluid loss beyond specified limits or lack of fluid indication, (hydraulic snubbers only);5)improper hot or cold positions,(snubbers and spring supports).(b)Except as defined in a)above, the following are examples of nonrelevant conditions-1)fabrication marks (e.g.,from punching, layout, bending, rolling and machining);

2)chipped or discolored paint;3)weld spatter on other than close tolerance machined or sliding surfaces;4)scratches or surface abrasion marks;5)roughness or general corrosion which does not reduce the load bearing capacity of the support;6)general conditions acceptable by material, Design,and/or Construc-tion Specifications.(c)Component supports whose examinations reveal conditions as defined in a)above, shall be unacceptable for continued service until they have been repaired, replaced, or evaluated as meeting the acceptance standards found in 4.4.2 of this Summary.31

4.4.2 Acceptance

IWF-3122.1 Acceptance by Examination, Component supports whose examinations do not reveal conditions described in IWF-3400(a) shall be acceptable for continued service.Verified changes of indications from prior examination shall be recorded in accordance with IWA-6220 IWF-3122.2 Acceptance by Repair, Component supports whose examination reveal conditions described in IWF-3400(a) shall be unacceptable for continued service until such conditions are repaired and re-examined in accordance with IWF-3123'WF-3122.3 Acceptance by Replacement, As an alternative to the requirement of IWF-3122', a component support or portion of a component support which is unacceptable for continued service may be replaced in accordance with IWA-7000.IWF-3122.4 Acceptance by Evaluation or Test, As an alternative to the requirements of IWF-3122.2, a Component support or portion of a component support which is unacceptable for continued service may be analyzed and/or tested to the extent necessary to substantiate it'integrity for it's intended service.Records and reports shall meet the requirements of IWA-6000.4.4.3 The Inservice testing of hydraulic and mechanical snubbers is performed'in accordance with Section XI requirements as augmented by the St.4ucie Unit 1 Technical Specifications which contain the test-ing and acceptance criteria.32 5.0 SUBMITTAL

SUMMARY

5.1 Description

of ISI Plan Format The Second Ten Year Inservice Inspection Plan Tables are being prepared for the components and piping systems which are subject to examination per the requirements of ASME Section XI.The examination Tables have been designed to provide the information necessary to effectively implement the examination program.For the purpose of efficiency and control the inspection plan has been divided into smaller areas of interest called zones.Each zone is developed from an isometric drawing of a specific component,sys-tem, or portion of a component or system which identifies all the welds and any other examination areas for that zone.The inspection plan tables that are generated from these isometrics (in conjuction with the isometrics) contain the information necessary for qualified examiners to perform the required examinations.

The following is a description of the format used in the tables-A.Table Header The table header contains, but is not limited to-a)Plant name and unit no.b)Plan revision no.c)Code Class d)Component or system description e)Zone no.B.Summary Number Each examination area(i.e.,weld, valve, support)is assigned an item number for administrative use only.C.REF.DWG.NO.Lists isometric drawing for the zone D.Examination area identification Lists unique identification number, description of examination area, calibration block, and location within the plant.E.ASME Section XI Item number F.ASME Section XI Code Category G.NDE Method(to be used)H.Plan Status Lists scheduling information for when each item is scheduled for examination by interval, period, and outage.also shows when the item was last examined.I.Instructions Gives specific details for each item,i.e.,material type and thickness, relief request number(if applicable),and any other inform-ation which will aid in the examination of the item.33

5.2 Description

of Summary Submittal Tables The tables included in this submittal (appendices A, B,&, C for Class 1, 2,&, 3 respectively) summarize by code category and code item number the total number of each item in the plant.Further definition is given as to the number of items to be selected for examination during the Second Ten Year Interval.The tables in appendices D, E,&F summarize by code catergory and code item number the hangers and supports subject to examination per Subsection IWF for Class 1, 2,&, 3 respectively.

Also included in the summary tables are the piping systems which were subject to examination during the First Ten Year Inservice Inspection Interval but are exempted for examination per Code Case N-408.These items are identified with"dummy" item numbers for correlation purposes only.All tables and isometric drawings used for in the Second Ten Year Inservice Inspection Program are developed from the Plant"As Built" Drawings and from the First Ten Year Inservice Inspection Program.34 DATE: 08/26/87 t REVISION: PLANT ST.LJCIE U"!IT I INSERV!CE INSPECTICN LGNS TER" PLAN C'SS 1 COiiPDNENTS REACTOR VESSEL HEA9 SUNNARY GANINAi!ON AREA NiJNSER!O'NTIPICATICN INSPECT!0N

!N:ERVAL I I L I 9 ASNE ASNE I 0 SEC.I!SEC.!(I NDE P ITEN 4 CATBY ilETH i OUTASE YEAR FlRST SECOND THIRD P R!09 PER10D PERIOD OUTASE OUTASE GUTASE 1 2 3 4 I 2 3 4 1 2 3 4 PPESERVICE YEAR INS;RUC IONS RPVCH REF.DNS NO 000023 RPV-CH-209-03C NERID.NEED 0 180 87-10X OP WELD LE1(STH EKANINED 91.2 8-8 UT I--87-2-4---"--87-"--Enn!NE>OX OF NELD.L P X&L}R:M DATEl OB/25/87 REVISIONS 1 ST.LUCIE HUCLEAR PLANT UNIT 1'NSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTIOH XI

SUMMARY

TABLE B PAGEOS 1 CATESORY C-A-PRESSURE RETAININB HELDS IK PRESSURE VESSELS ASME SEC XI ITEM 4 ITEM DESCRIPTIDH EXAM METHOD SYSTEM DESCRIPTION 0 OF COMPOHENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED.1ST PER 2HD PER 3RD PER 6.0 Records and Data Management Records of the ISI Plan, schedules, calibration standards, examination procedures, examination results and reports, certifications, and corrective actions required and taken, will be developed, submitted and maintained in accordance with the requirements ASME Section XI, Article IWA-6000.35 RPPENDIN R CLRSS 1 ENRMINRT ION SUMMRRY TRBLES DATE: OB/25/87 REVISION: I ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR tHE FIRST INTERVAL CLASS I SECTION XI SUtlttARY TABLE A PAGE: 1 EXAM HETHOD SYSTEN DESCRIPTION T CATEGORY B-A-PRESSURE RETAINING MELDS IN REACTOR VESSEL ASNE SEC.Xl ITEN tt ITEN DESCRIPTION 4 OF CDNPONENTS NUHBER OF RELIEF SCHEDULED/COMPLETED IONE COMPONENTS REQ.IST PER 2ND PER 3RD PER B1.22 MERIDIONAL HEAD MELDS B1.22 ttERIDIQNAL HEAD MELOS VOLUttETRIC RCS RPV VOLUMETRIC RCS CLOSURE HEAD 81~30 BI.40 B1.50 SHELL-TO-FLANGE MELD VOLUttETRIC RCS RPV NOTE:EXAMINE 1/4 IST PERIOD, 1/4 2ND PERIOD, I/2 3RD PERIOD VOLUHETRIC RCS CLOSURE HEAD SURFACE<4>4%NOTE lEXANINE 1/3 1ST PER)1/3 2ND PERy I/3 3RD PER REPAIR MELDS VOLUMETRIC RCS RPV B1.51 REPAIR MELDS-BELTLltiE REGION VOLUMETRIC RCS RPV 81.11 CIRCUttFERENTIAL SHELL MELDS VOLUHETRIC RCS RPV Bl.12 LONGITUDINAL SHELL MELDS VOLUttETRIC RCS RPV BI~21 CIRCUMFEREttTIAL HEAD MELDS VOLUMETRIC

'RCS RPV B1.21 CIRCUNFERENTIAL HEAD MELDS VOLUt!ETRIC RCS CLOSURE HEAD I RR-1 0/0 0/0 1/0 9 RR-1 0/0 0/0 I/O 1 RR-1 0/0 0/0 1/0 1 0/0 0/0 1/0 6 RR-I 0/0 0/0 1/0 6 RR-2 0/0 I/O 0/0 1 RR-1 I/O 1/0 1/0 1 RR-2 1/0 1/0.I/0 0/0 0/0 0/0 0/0 0/0 0/0 DATE: 08/25/87 REVISION'.

I ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE It(SPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION Xl SUt(t(ARY TABLE A PAGE: 2 EXAM i";ETHOD SYSTEM DESCRIPTION e CATEGORY B-B-PR.'SSURE RETAINING MELDS IN PRESSURIZER AsrE SEC.Xl ITEN 4 ITEN DESCRIPTION a OF CDNPONENTS tlVt(BER OF RELIEF SCHEDULED/COMPLETED ZONE COt(PONENTS RED.IST PER 2ND PER 3RD PER B2.10 PRESSURIZER-SHELL-TO-HEAD VOLUt(ETRIC RCS MELDS 0/0 0/0 0/0 82.22 t(ERIDIONAL HEAD MELDS VOLU))ETRIC RCS B2.11 PRESSURIZER-CIRCUMFERENTIAL VDLU)(ET1(IC RCS SHELL-TO-HEAD MELDS B2.12 PRESSURIZER-LONGITUDINAL SHELL VOLU)(ETRIC RCS MELDS 82'1 CIRCUt(FERENTIAL HEAD MELDS VOLUMETRIC RCS 1/0 1/0 0/0 1/0.1/0 0/0 0/0 0/0 1/0 0/0 0/0 1/0 82.31 STEAN GENERATORS (PRI)(ARY VOLUMETRIC RCS SG-IA SIDE)-CIRCUMFERENTIAL HEAD MELDS%%%4m NOTE;EXANINE I/3 1ST PERIOD, 1/3 2ND PERIOD, 1/3 3RD PERIOD t 82.31 STEAt(GENERATORS (PRIMARY VOLU)(ETRIC RCS SG-18 SIDE)-CIRCUMFERENTIAL HEAD MELDS 4 RR-3 1/0 I/O 1/0 0/0 0/0 0/0 82.32 STEAN GENERATORS (PRI)(ARY VOLUMETRIC RCS SG-1A SIDE)-iMERIDIONAL HEAD MELDS%%%%a NOTE lNU)(BER OF CONPDNENTS INCLUDES 4 LONG.SEAMS 82.32 STEAN GENERATORS (PRINARY VOLUMETRIC RCS SG"18 SIDE)-t(ERIDIONAL HEAD MELDS 44+4+NOTE lNU)(BER OF COt(PONENTS INCLUDES 4 LOt(G.SEAMS 9 RR-3 1/0 I/O 2/0 IN EXTENSIOtt RING, ALL FOUR EXANINED MHEN TUBESHEET TO HEAD DOt(E 4 9 0/0 0/0 0/0 IN EXTENSIOH RING, ALL FOUR EXAMINED MHEN TUBESHEET TO HEAD DONE.82.40 STEAN GENERATORS (PRlt(ARY VOLU)(ETRIC SG-IA 1 RR-3 1/0 1/0 I/O SIDE)-TUBESHEET-TO-HEAD MELD w%w44 t(OTE:EXAMINE 1/3 1ST PERIOD, 1/3 2ND PERIOD, I/3 3RD PERIOD 82.40 STEAN GENERATORS (PRINARY VOLU)(ETRIC SG-18 SIDE)-TUBESKEET-TO-HEAD MELD 0/0 0/0 0/0 82.50 HEAT EXCHANSERS (PRIMiARY SIDE)VOLUMETRIC RCS N/A-HEAD-HEAD MELDS 0/0 0/0 0/0 82.5)HEAT EXCHANGERS (PRlt(ARY SIDE)VOLU)(ETRIC RCS N/A-HEAD-CIRCU)(FERENTIAL HEAD MELDS 0/0 0/0 0/0 DATE: 08/25/87 REVISION((ST.LUCIE NUCLEAR PLANT UNIT (INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS (SECTION Xl SUNNARY TABLE A PAGE: ASNE SEC.XI ITEN 4 ITEN DESCRIPTION EXAN NETHOD SYSTE)(DESCRIPTION 4 OF COMPONENTS NUNBER OF RELIEF SCHEDULED/CONPLETED ZONE CONPONENTS RED IST PER 2ND PER 3RD PER B2 52 HEAT EXCHANGERS (PRINARY SIDE)VO(.Ui(ETRIC RCS N/A-HEAD-NERIDIONAL HEAD MELDS B2 F 60 HEAT EXCHANGERS (PRINARY SIDE)VOLUNETRIC N/A-SHELL-TUBESHEET-TO-HEAD MELDS B2.70 HEAT EXCHANGERS (PRINARY SIDE)VOLUNETRIC N/A-SHELL-LOi'(GITUDINAL MELDS 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 OIO B2.80 HEAT EXCHANGERS (PRINARY SIDE)VOLUNETRIC WIA-SHELL-TUBESHEET-TO-SHELL MELDS 0/0 0/0 0/0 DATE'.08/25/87 ST.LUCIE t(UCLEAR PLANT UNIT 1 REV IS IOHl I INSERVICE INSPECTION PLAtt FOR THE FIRST INTERVAL C(.ASS I SECTION XI SUt(NARY TABLE A CATEGORY B-D-FULL PENETRATION MELDS OF NOZZLES KH REACTOR VESSEL (INSPECTION PROGRAN A)PAGE: ASNE SEC.Xi ITEN 4 ITEN DESCRIPTION EXAN t(ETHOD SYSTE)(DESCRIPTION 4 OF CONPONENTS HUNGER OF RELIEF SCHEDULED/COt(PLETED ZONE CONPONENTS RED.KST PER 2ND PFR 3RD PER 83.90 REACTOR VESSEL-t(OZZLE-TO VOLUt(ETRIC RCS RPV-VESSEL MELDS 83, 100 REACTOR VESSEL-NOZZLE IHSIDE VOLUt(ETRKC RCS RPV RADIUS SECT IOH B3.110 PRESSURIZER-NOZZLE-TO-VESSEL VOLUNETRIC RCS MELDS 83.120 PRESSURIZER-NOZZLE It(SIDE VOLUNETRIC RCS RADIUS SECTKDN 6 RR-4 2/0 0/0 4/0 6 RR-4 2/0 0/0 4/0 6 RR-5 2/0 2/0 2/0 6 RR-5 2/0 2/0 2/0 83.130 STEAN GENERATORS (PRIKARY VOLUMETRIC RCS SG-1A SIDE)-NOZZLE-TO-VESSE(.

MELDS II 83.130 STEAN GENERATORS (PRINARY VOLUNETRIC RCS SG-18 SKDE)-NOZZLE-TO-VESSEL MELDS RR-3 2/0 1/0 0/0 4 3 RR-3 0/0 I/O2/0 83.140 STEAN GENERATORS (PRINARY SIDE)-NOZZLE INSIDE RADIUS SECTION VOLU)(ETRIC RCS SG-1A RR-3 2/0 1/0 , 0/0 ,83.140 STEAN GENERATORS (PRINARY SIDE)-NOZZLE INSIDE RADIUS SECTION VOLUt(ETRIC RCS SG-18 RR-3 0/0 1/0 2/0 83.150 HEAT EXCHANGERS (PRIHARY SiDE)VOLUNETRKC RCS N/A-NDZZLE-TO-VESSE(.

MELDS 83, 160 HEAT EXCHANGERS (PRINARY SIDE)VOLUMETRIC RCS N/A-NOZZLE INSIDE RADIUS SECTIOH , 0/0 0/0 0/0 0/0 0/0 0/0 QATEl 08/25/87 REVISION: ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUNNARY TABLE A PASEl 5 CATEGORY B-E-PRESSURE RETAININS PARTIAL PENETRATION NELDS IN VESSELS ASNE SEC.ZI ITEN II ITEN DESCRIPTION EKAN NETHOD SYSTEN DESCRIPTION 4 OF CONPONENTS NUNBER OF RELIEF SCHEDULED/CONPLETED ZONE CONPONENTS REQ~1ST PER 2ND PER 3RD PER B4.10 PARTIAL PLNETRATIOH MELOS VISUAL VT-2 RCS B4.11 VESSEL NOZZLES VISUAL VT-2 RCS N/A B4.12 CONTROL ROD DRIVE HOZZLES VISUAL VT-2 RCS CLOSURE HEAD B4.13 INSTRUNENTATION HOZZLES VISUAL VT-2 RCS CLOSURE HEAD B4.20 PRESSURIZER-HEATER PENETRATION VISUAL VT-2 RCS PRESSURIZER NELDS 2 91 2 10 5 120 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 23/0 0/0 0/0 3/0 0/0 0/0 120/0

PAGE: 6 4 OF CONPONENTS NUMBER OF RELIEF SCHEDULED/CONPLETED EXAM METHOD SYSTEM DESCRIPTION ZONE COMPONENTS REQ.1ST PER 2ND PER 3RD PER DATE,'08/25/87 ST.LUCIE NUCLEAR PLANT UNIT I REVISIONS I INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUNNARY e TABLE A CATEGORY B-F-PRESSURE RETAINING DISSINILAR METAL MELDS IN REACTOR VESSEL ASNE SEC.XI ITEN N ITEN DESCRIPI'ION 85 10 REACTOR VESSEL-NOZZLE-TO-SAFE VOLUMETRIC RCS RPV END BUTT MELDS>=4 INCHES SURFACE NONINAL PIPE SIZE 0/0 0/0 0/0 85.20 REACTOR VESSEL-NOZZLE-TO-SAFE END BUTT MELDS<4 INCHES NOMINAL PIPE SIZE RCS RPV 0/0 0/0 0/0 B5.20 REACTOR VESSEL-NOZZLE-TO-SAFE SURFACE RCS RPV END'BUTT MELDS<4 INCHES NOMINAL PIPE SIZE 85.30 REACTOR VESSEL-NDZZLE-TO-SAFE SURFACE RCS RPV END SOCKET MELDS 0/0 0/0 0/0 0/0 0/0 0/0 85.40 PRESSURIZER-NOZZLE-TO-SAFE END VOLUMETRIC RCS PRESSURE BUTT MELDS>=4 INCHES NOMINAL SURFACE e PIPE SIZE 85,50 PRESSURIZER-NOZZLE-TO-SAFE END SURFACE RCS PRESSURIZER BUTT MELDS<4 INCHES NOMINAL PIPE SIZE 1/0 1/0 1/0 0/0 0/0 0/0 B5.60 PRESSURIZER-NOZZLE-TO-SAFE END SURFACE RCS PRESSURIZER SOCKET MELDS 0/0 0/0 0/0 85.70 STEAN GENERATOR-NOZZLE-TO-SAFE END BUTT MELDS>=4 INCHES NONINAL PIPE SIZE SG-lA, SG-18 3,4 0 0/0 0/0 0/0 85 70 STEAN GENERATOR-NOZZLE-TO-SAFE VOLUMETRIC SG-IA,S6-18 END BUTT MELDS>"-4 INCHES SURFACE NOMINAL PIPE SIZE 3,4 0 0/0 0/0 0/0 B5 F 80 STEAN GENERATOR-NOZZLE-TO-SAFE END BUTT MELDS<4 INCHES NOMINAL PIPE SIZE SG-1A,S6-18 3,4 0 0/0 0/0 0/0 85 F 80 STEAN GENERATOR-NOZZLE-TO-SAFE SURFACE END BUTT MELDS<4 INCHES NOMINAL PIPE SIZE 85.90 STEAN 6ENERATOR-NOZZLE-TO.SAFE SURFACE END SOCKET MELDS SG-1A)SG-18 RCS SG-IA,S6-1B 3,4 0 3,4 0 0/0 0/0 0/0 0/0 0/0 0/0 DATE: 08/25/87 ST~LUCIE NUCLcAR PLANT UNIT 1 REVISION: INSERVICE iNSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 cECTION XI SUNNARY t TABLE A CA'KEGORY 8-F-PRESSURE RETAINING DISSINKLAR METAL MELDS IN REACTOR VESSEL PAGE: 7 ASNE SEC.Xl ITEN tt ITEN DESCRIPTION 4 OF CONPONENTS tjUttBER OF RELIEF SCHEDULED/COHPLETED EXAM METHOD SYSTEN DESCRIPTION ZONE CONPOttENTS RED.IST PER 2ND PER 3RD PER B5.100 HEAT EX'HANGERS-NOZZLE-TO-SAFE END BUTT WELDS>=4 INCHES NONINAL PKPE SIZE 85.100 HEAT EXCHANGERS-NOZZLE-TO-SAFE SURFACE END BUTT MELDS>=4 INCHES NOMINAL PIPE SIZE 85.110 HEAT EXCHANGERS-NOZZLE-TO-SAFE SURFACE END BUTT MELDS<4 IttCHES NONINAL PIPE SIZE RCS N/A RCS N/A RCS N/A 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 85.110 HEAT EXCHANGERS-NOZZLE-TO-SAFE END BUTT MELDS<4 INCHcS NONINAL PIPE SIZE RCS N/A 0/0 0/0 0/0 85.120 HEAT EXCHANGERS-NOZZLE-TO-SAFE SURFACE END SOCKET MELDS RCS N/A 0/0 0/0 0/0 B5.130 PIPING-DISSINILAR NETAL BUTT VOLUNETRIC RCS NCP MELDS>=4 INCHES NOMINAL PIPE SURFACE SIZE I/O 0/0 0/0 85.130 PIPING-DISSINILAR NETAL BUTT VOLUMETRIC RCS NCP MELDS>=4 INCHES NOMINAL PIPE SURFACE SIZE 85.130 PIPING-DISSINILAR MEtAL BUTT VOLUHETRKC RCS ttCP McLDS>=4 IttCHES NONINAL PIPE SURFACE SIZE 10 0/0 0/0 1/0 1/0 0/0 0/0 85.130 PIPING-DISSIttILAR METAL BUTT VOLUMETRIC RCS ttCP WELDS>=4 INCHES NONINAL PIPE SURFACE SIZE 85.130 PIPING-DISSINKLAR ttETAL BUTT VOLUttETRIC RCS tlCP MELDS>=4 INCHES NOtlINAL PIPE SURFACE SIZE 12 0/0 0/0 1/0 1/0 0/0 0/0 85.130 PIPING-DISSINIK.AR NETAL BUTT VOLUMETRIC RCS NCP'ELDS>=4 INCHES.NONINAL PIPE SURFACE SIZE 0/0 1/0 0/0 DATE: 08/25/87~ST.LUCIE NUCLEAR PLANT UNIT I REVISION:!INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUHtlARY TABLE A CAIEGORY 8-F-PRESSURE RETAININ6 DISSIMILAR ttETAL MELDS IN REACTOR VESSEL PAGEOS 8 AGEE SEC Xl ITEN 4 ITEi!DESCRIPTION EXAti METHOD SYSTEM DESCRIPTION 4 OF COMPONENTS NUttBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS REQ.!ST PER 2ND PER 3RD PER 85.130 PIPIN6-DISSINILAR NETAL BUTT VOLUMETRIC RCS i1CP MELDS>=4 INCHES NONINAL PIPE SURFACE SIZE 1/0 0/0 0/0 85.130?IPING-OISSKNILAR HETAL BUTT VOLUtlETRIC RCS MCP MELOS>=4 INCHES NOHIttAL PIPE SURFACE SIZE 15 0/0 1/0 0/0 85.130 PIP IN6-DISSINILAR METAL BUTT VOLUMETRIC RCS SURGE LINE MELOS>-"4 INCHES NOMINAL PIPE SURFACE SIZE 85,130 PIPIttG-DISSIHILAR METAL BUTT VOLUttETRIC RCS Sl NOZZLE MELOS>=4 INCHES NOMINAL PIPE SURFACE SIZE 16 21 1/0 I/O 0/0 1/0 0/0 0/0 85.130 PKPItiG-DISSKttILAR ttETAL BUTT VOLUtlETRIC RCS Sl ttOZZLE MELOS>=4 INCHES NOMINAL PIPE SURFACE SIZE 85.130 PIPING-DISSIHILAR ttETAL BUTT VOLUHETRIC RCS SI NOZZLE MELDS>=4 INCHES NOHINAL PIPE SURFACE SIZE 23 1/0 0/0 0/0 1/0 0/0 0/0 85.130 P IP ING-DISS INILAR NETAL BUTT VOLUMETRIC RCS Sl NOZZLE MELDS>=4 INCHES NOHINAL PIPE SURFACE SIZE.24 0/0 0/0 1/0 85.130 PIPING-DISSIMILAR ttETAL BUTT MELDS>-"4 INCHES NONINAL PIPE SIZE RCS PR.SPRAY 25 2/0 0/0 2/0'5.130 85 130 P IP IN6-DISS IHILAR HETAL BUTT ME!.DS>=4 INCHES NONINAL PIPE SIZE PIPING-DISSINILAR HETAL BUTT MELDS>=4 INCHES NONKNAL PIPE SIZE RCS 6~D~C, RCS S AD.C.28 29 1/0 0/0 0/0 1/0 0/0 0/0 85.130 PIPING-DISSKHILAR METAL BUTT MELDS>=4 INCHES NOMIttAL PIPE SIZE RCS PR~RELIEF 38 0/0 0/0 1/0 PAGE: 9 4 OF COttPOttENTS NUttBER OF RELIEF SCHEDULED/COMPLETED ZONE COttPONENTS REQ.1ST PER 2ND PER 3RD PER OATEN'8/25/87 ST.LUCIE NUCLEAR PLANT UNIT I REV IS ION: I INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUNttARY TABLE A e CATEGORY 8-F-PRESSURE RETAINING DISSINILAR ttETAL MELDS IN REACTOR VESSEL ASHE SEC.Xl ITEN tt ITEN DESCRIPTION EXAM ttETHOD SYSTEN DESCRIPTION 85.140 PIP lttG-DISSIMILAR ttETAL BUTT SURFACE RCS NCP MELDS<4 INCHES ttONINAL PIPE SIZE OIO OIO 1/0 85.140 85.140 PIPING-DISSIMILAR ttETAL BUTT SURFACE RCS PRESSURE SPRAY MELDS<4 INCHES ttONINAL PIPE SIZE PIPING-DISSIMILAR NETAL BUTT SURFACE RCS PRESSURE SPRAY MELDS<4 INCHES NOMINAL PIPE SIZE 26 27 0/0 1/0 0/0 0/0 0/0 I/O 85.140 PIPING-DISSINILAR NE'TAL BUTT SURFACE MELOS<4 INCHES NOMINAL PIPE SIZE RCS CHARGING 0/0 0/0.1/0 85.140 PIPING-DISSittILAR METAL BUTT SURFACE MELDS<4 INCHES NONINAL PIPE SIZE RCS CHARGING 0/0.I/O 0/0 85.140 85,140 PIPItiB-DISSIIIILAR ttETAL BUTT SURFACE RCS DRAIN MELDS<4 INCHES NQNINAL PIPE SIZE PIPING-DISSINILAR ttETAL BUTT SURFACE RCS DRAIN MELOS<4 INCHES NONlttAL PIPE SIZE 1/0 OIO 0/0 0/0 1/0 0/0 85.140 P IP ING-DISS INILAR METAL BUTT SURFACE RCS DRAltt MELDS<4 INCHES NONINAL PIPE SIZE 35 1/0 0/0 0/0 85.140 P IP I WG-DISS INILAR METAL BUTT SURFACE MELDS<4 INCHES NONINAL PIPE SIZE RCS DRAIN 0/0 0/0 1/0 85.140 85.150 PIPING-DISSIMILAR ttETAL BUTT SURFACE MELDS<4 INCHES NONINAL PIPE SIZE PIPING-DISSIMILAR ttETAL SOCKET MELDS RCS PRESSURE RELIEF 38 RCS N/A I/0 0/0 0/0 0/0 0/0 0/0 M DATE: 08/25/87 REV IS IQNl ST~LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAit FOR THE FIRST INTERVAL CLASS I SECTION XI SUttMARY TABLE A PAGE: 10 CATEGORY 8-6-1-PRESSURE RETAINING BOLTING GREATER THAN 2 INCHES IN DIAMETER IN REACTOR VESSEL ASNE SEC.XI ITEt1 4 ITEN DESCRIPTION EXAN ttETHOD SYSTEN DESCRIPTION 4 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/CQNPLETED ZONE CONPONENTS REQ.IST PER 2ND PER 3RD PER Bb.10 REACTOR VESSEL-CLOSURE HEAD SURFACE RCS RPV NUTS 86'0 REACTOR VESSEL CLOSURE STUDS)VOLUNETRIC RCS RPV IN PLACE 86.30 REACTOR VESSEL-CLOSURE STUDS, VOLUNETRIC RCS RPV WHEN REMOVED SURFACE 18/0 18/0!8/0 0/0 0/0 0/0 18/0 18/0 18/0 86.70 PRESSURIZER-FLANGE SURFACE, VISUAL VT-I RCS PRESSURE MHEN CONNECTION DISASSEMBLE)D 86.40 REACTOR VESSEL-THREADS IN VOLUNETRIC RCS RPV FLANGE>>~>>NOTE lEXANINE I/3 IST PERIOD, I/3 2t(D PERIOD)I/3 3RD PERIOD 86.50 REACTOR VESSEL-CLOSURE MASltERS VISUAL VT-1 RCS RPV)BUSHINGS 86,60 PRESSURIZER-BOLTS AND STUDS VOLUMETRIC RCS PRESSURE 18/0 18/0 18/0 18/0 18/0 18/0 0/0 0/0 0/0 0/0 0/0 0/0 86~80 PRESSURIZER NUTS)BUSHINGS)VISUAL VT I RCS PRESSURE AND MASHERS 86.90 STEAtt GENERATORS-BOLTS AND VOLUMETRIC SG-1A,SG-18 STUDS 3,4 0 0/0 0/0 0/0 0/0 0/0 0/0 86.100 STEAN GENERATORS-FLANGE SURFACE, MHEN COttNECTION DISASSENBLEO VISUAL VT-1 RCS SG-IA,SG-IB 3,4 0 0/0 0/0 0/0 86.110 STEAN GENERATORS-NUTS, BUSHINGS)AND MASHERS VISUAL VT-I RCS SG-IA,SG-IB 3)4 0 0/0 0/0 0/0 86.120 HEAT EXCHANGERS-BOLTS AND VOLUMETRIC RCS N/A STUDS 0/0 0/0 0/0 86.130 HEAT EXCHAttGERS-FLANGE SURFACE VISUAL VT-I RCS N/A , MHEN CONtiECTIQN DISASSEMBLED Bb.140 HEAT EXCHANGERS-NUTS, BUSHINGS VISUAL Vl'-1 RCS N/A)AND MASHERS 0/0 0/0 0/0 0/0 0/0 0/0 DATE: 08/25/87 REVISIONS 1 ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI

SUMMARY

TABLE A PAGE: 11 ASNE SEC.XI ITEN 4 ITEN DESCRIPTION EXAM METHOD SYSTEN DESCRIPTION 4 OF CONPONENTS NUMBER OF RFLIEF SCHEDULED/COMPLETED ZONE COMPONENTS REQ.IST PER 2ND PER 3RD PER B6.150 PIPING-BOLTS AND STUDS VOLUMETRIC RCS N/A 86.160 PIPIttG-FLANGE SURFACE, MHEtt VISUAL VT-I RCS N/A CONNECTION DISASSEMBLED 0/0 0/0 0/0 0/0 0/0 0/0 B6.170 PIPltiG-NUTS, BUSHINGS, AttD VISUAL VT-1 RCS N/A MASHERS OIO 0/0 0/0 86.180 PUNPS-BOLTS AtiD STUDS 86.180 PU11PS"BOLTS AND STUDS B6.180 B6.180 PUNPS-BOLTS AND STUDS PUMPS-BOLTS AND STUDS VOI.UMETRIC RCS RCP" 1A1 VOLUNETRIC RCS RCP-1A2 VOLUMETRIC RCS RCP-181 VOLUNETRIC RCS RCP-lB2 86 190 PUMPS FLANGE SURFACEs WHEN VISUAL VT-1 RCS RCP-1AI CONNECTION DISASSEMBLED aaaaa NOTE CSEE RELIEF REQUEST 17 16 18 16 16/0 0/0 0/0 0/0 0/0 16/0 19 16 0/0 16/0 0/0 17 20 16 0/0 0/0 16/0 RR-7 0/0 0/0 OIO Bb.190 PUNPS-FLANGE SURFACE, MHEN VISUAL VT-1 RCS RCP-1A2 CONNEC'CION DISASSENBLED

%%%%a NOTE:SEE RELIEF REQUEST 18 RR-7 0/0 0/0 0/0 Bb.190 PUNPS-FLANGE SURFACE,'AHEN VISUAL VT-1 RCS RCP-181 CONNECTION OISASSENBLED I+awa NOTE:SEE RELIEF REQUEST 19 1 RR-7 0/0 0/0 0/0 Bb~190 PUMPS-FLANGE SURFACE, NHEN VISUAL VT-I RCS COtiNECT ION DISASSENBLED

~fwa+NOTE CSEE RELIEF REQUEST RCP-182 20 I RR 7 0/0 0/0 0/0 86.200.PUMPS-tiUTS, BUSHIN6S, AND VISUAL VT-1.RCS RCP-lAI NASHERS 86.200 PUMPS-NUTSs BUSHIN6S, AND VISUAL VT-I RCS RCP-IA2 NASHERS Bb 200 PUMPS-NUTS, BUSHltiGS, AND ViSUAL VT-I RCS RCP-181 NASHERS 86.200 PUMPS-tiUTSs BUSHINGS, AND VISUAL VT-I RCS RCP-182 MASHERS 17 16 18 16 19 16 20 16 16/0 0/0 0/0 0/0 0/0 16/0 0/0 16/0 0/0 0/0 OIO 16/0 ST.LUCIE tiUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST ItiTERVAL CLASS 1 SECTION XI SUttttARY t TABLE A CATEGORY B-G-1-PRESSURE RETAINING BOLTING GREATER THAN 2 INCHES Iti DIANETER IN REACTOR VESSEL PAGE: 12 ASNE SEC~Xl ITEN 4 ITEtt DESCRIPTION EXAN tiETHOD SYSTEN DESCRIPTION 4 OF COilPONENTS NUNBER OF RELIEF SCHEDULED/CDHPLETED ZONE COttPONENTS RED.1ST PER 2ND PER 3RD PER B6.210 VALVES-BOLTS AND STUDS VOLUNETRIC RCS N/A Bb.220 VALVES-FLANGE SURFACE, NHEN VISUAL VT-1 RCS ti/A CONNECTION DISASSEHBLED 0/0 0/0 0/0 0/0 0/0 0/0 86.230 VALVES-NUTS, BUSHINGS, AND VISUAL VT-1 RCS N/A USHERS 0/0 0/0 0/0 DATE: 08/25/87 REVISION: ST.LUCIE ttUCLEAR PLANT UttlT 1 INSERVICE IHSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI

SUMMARY

TABLE A PAGE: 13 ,CATEGORY B-G"2-PRESSURE RETAIHING BOLTlttG, 2 INCHES AND LESS IN DIAMETER IN REACTOR VESSEL ASME SEC.XI ITEM 4 ITEM DESCRIPTION EXAM METHOD SYSTEM DESCRiPTION D OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED.1ST PER 2ttD PER 3RD PER 87'0 REACTOR VESSEL-BOLTS, STUDS)VISUAL VT-1 RCS RPV AND ttUTS 0/0 0/0 0/0 87.20 87.30 PRESSURIZER-BOLTS, STUDS, AND VISUAL VT-I RCS PRESSURE 5 20 7/0 7/0 6/0 NUTS%%+a+NOTE:NUMBER OF ITEMS"-20 HUTS, 20 STUDS.EXAMINE 1/3 1ST PERIOD, 1/3 2HD PERIOD, 1/3 RD PERIOD.S'TEAM GENERATORS-BO'S, STUDS, VISUAL VT-I RCS PRESSURE-1A 40 20/0 0/0 20/0 AND HUTS 4ft~4 NOTE ,'NUMBER OF ITEtlS=40 ttUTS, 40 STUDS.EXAMlttE 20 EACH 1ST PERIOD, 20 EACH 3RD PERIDD.87,30 STEAM GENERATORS-BOLTS, STUDS, VISUAL VT-I RCS PRESSURE-18 4 40 0/0 20/0 20/0 AND NUTS a~a+~NOTE;NUMBER OF ITEMS=40 t<UTS, 40 STUDS.EXAMINE 20 EACH 2HD PERIOD, 20 EACH 3RD PERIOD.87.40 13/0 13/0 14/0 HEAT EXCHAHGERS-BOLTS, STUDS, VISUAL VT-1 RCS H/A 40 AND HUTS a%%%%NOTE lNUMBER OF ITEMS=40 NUTS, 40 STUDS.EXAMINE 1/3 IST PERIOD, I/3 2ND PERIOD, 1/3 3RD PERIOD 87.50 PIPING BOLTSi STUDSi AND NUTS VISUAL VT 1 RCS aaeaa NOTE lttUMBER OF ITEMS ARE FLANGES.33 2 1/0 I/O 0/0 87.50 PIPIttG-BOLTS, STUDS, AHD NUTS VISUAL VT-1 RCS%%%%%NOTE lNUMBER OF ITEMS ARE FLANGES.87o50 PIPING-BOLTS, STUDS, AND NUTS VISUAL VT-1 RCS%%alt NOTE;NUMBER OF ITEMS ARE FLAN6ES.0/0 1/0'/0 0/0 0/0 1/0 87.50 PIPING BOLTS)STUDS)AND NUTS VISUAL VT I RCS tweak+NOTE;NUMBER OF ITEMS ARE FLAN6ES~1/0 0/0 0/0 87.50 PIPING-BOLTS, STUDS, AND NUTS VISUAL VT-I RCS wat%w NOTE:NUMBER OF ITEMS ARE FLAH6ES.0/0 1/0 0/0 87.60 PUMPS-BOLTS, STUDS, AND HUTS VISUAL VT-1 RCS~~~+NOTE lEXAMINE I/3 1ST PERIODS 1/3 2ND PERIOOi I/3 3RD PERIOD 87~60 PUMPS BOLTS>STUDS)AND NUTS VISUAL VT 1 RCS%%%a+NOTE:EXAMINE 1/3 1ST PERIOD, 1/3 2ND PERiOD, 1/3 3RD PERIOD 87,60 PUMPS-BOLTS, STUDS)AND NUTS VISUAL VT-1 RCS a%aaa NOTE:EXAMIHE 1/3 1ST PERIOD, 1/3 2ND PERIOD, 1/3 3RD PERIOD 17 18 19 1/0 i/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 DATE: 08/25/87 ST.LUCIE NUCLEAR PLANT UNIT 1 REVISIOH: INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION Xl SUNNARY t TABLE A CATEGORY 8-8-2-PRESSURE RETAIHINB BOLTINB, 2 INCHES AHD LESS IN DIANETER IN REACTOR VESSEL PAGE: 14 AStiE SEC~Xl ITEtt 4!TEN DESCRIPTION EXAti NETHOD SYSTEN DESCRIPTION 4 GF CONPOttEtlTS NUNBER OF RELIEF SCHEDULED/CONPLETED ZONE CONPOHENTS RED 1ST PER 2ND PER 3RD PER 87.60 87.70 PUNPS-BOLTS, STUDS, AND HUTS VISUAL VT" 1 RCS<%w<+NOTE:EXANltiE I/3 1ST PERIOD, I/3 2ND PERIOD, I/3 3RD PERIOD VALVES-BOLTS, STUDSs AHD NUTS VISUAL VT-1 RCS 12'ALVES>>>>+NOTE'EXANINE 1/3 IST PERIODs I/3 2ND PERIODs 1/3 3RD PERIODS 20 I/O I/O 1/0 1/0 I/O I/O 87~70 VALVES BOLTS)STUDS)AND NUTS VISUAL VT 1 RCS 10 VALVES%>><a NOTE'.EXANIHE I/3 IST PERIOD)1/3 2ND PERIODs 1/3 3RD PERIOD.87.70 VALVES-BOLTSs STUDS, AtlD NUTS VISUAL VT-1 RCS 6'ALVES~i~~~NOTE'.EXANINE I/3 1ST PERIODs 1/3 2HD PERIOD, 1/3 3RD PERIODS 87.70 VAt.VES-BOLTS, STUDS, AND NUTS VISUAL VT-I RCS 3'ALVES w44fw NOTE:EXANINE 1/3 IST PERIOD, 1/3 2ND PERIODs 1/3 3RD PERIOD.I/O 1/0 1/0 I/O I/O 1/0 1/0 I/O I/O 87.70 VALVES-BOLTS)

STUDS)AND NUl'S VISUAL VT-1 RCS 2.5'ALVES~w4~w NOTE."EXANIHE 1/3 1ST PER!OD, 1/3 2ND PERIOD, 1/3 3RD PERIOD.I/O 1/0 I/O 87'0 VALVES BOLTS)STUDSs AHD NUTS VISUAL VT 1 RCS 2 VALVES%law%NOTE'.EXANIHE 1/3 IST PERIOD, 1/3 2HD PERIGD, 1/3 3RD PERIGD.25 1/0 1/0 1/0 B7.80 CRD HOUSINGS-BOLTSs STUDSs AND VISUAI.VT-1 RCS tt/A NUTS 0/0 0/0 0/0 DATE.'8/25/87 REVISIONS 1 ST.LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPECTION PLAN FOR THE FIRST IttTERVAL CLASS 1 SECTION Xl

SUMMARY

TABLE A PAGE: 15 EXA}1 METHOD SYSTEM DESCRIPTION CATEGORY B-H-INTEGRAt.ATTACHMENTS FOR REACTOR VESSEL ASME SEC.XI ITEM tt ITEM DESCRIPTION 4 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED, IST PER 2ND PER 3RD PER BB.10 REACTOR VESSEL-INTEGRALLY MELDED ATTACHMENTS VOLUMETRIC RCS N/A PER 88.10<1)OR SURFACE 0/0 0/0 0/0 B8.20 PRESSURIZER-INTEGRALLY NELDED VOLUMETRIC RCS PRESSURE 5 ATTACHMEttTS OR SURFACE%4ff%NOTE:EXAMINE 1/3 IST PERIOD, 1/3 2ND PERIOD)1/3 3RD PERIOD 88,30 STEAM GENERATORS-INTEGRALLY VOLUMETRIC RCS NELDED ATTACHMENTS OR SURFACE+a>%%NOTE lEXAMittE 1/3 IST PERIOD, 1/3 2ND PERIOD)1/3 3RD PERIOD B8,30 STEAM GENERATORS-INTEGRAI.LY VOLUMETRIC RCS'AELDED ATTACHMENTS OR SURFACE 88.40 HEAT EXCHAttGERS-INTEGRALLY VOLUMETRIC RCS N/A NELOED ATTACHMENTS OR SURFACE I/O 1/0 1/0 1/0 I/O 1/0 0/0 0/0 0/0 0/0 0/0 0/0 DATEl 08/25/87 REVISION: 1 ST.LUCIE ttUCLEAR PLANT UNIT 1 IHSERVICE INSPECTION PLAN FOR THE FIRST IHTERVAL CLASS 1 SECTION XI SUNtlARY TABLE A PAGE: 16 EXAM tlETHDD SYSTEM DESCRIPTION t CATFGORY 8-J-PRESSURE RETAINING MELDS IN PIPING ASNE SEC.XI ITEN 4 ITEtl DESCRIPTION 0 OF CONPONENTS NUMBER OF RELIEF SCHEDULED/COtlPLETED ZONE COtlPONENTS REQ.IST PER 2ND PER 3RD PER 89.11 CIRCUMFERENTIAL MELDS 89~11 C IRCUtlFERENT IAL MELDS VOLUtlETRIC RCS ttAltl COOLANT 42'-NPS SURFACE VOLUllETRIC RCS HAIN COOl.ANT 30'-HPS SURFACE 10 RR-6 1/0 1/0 2/0 44 RR-6 5/0 4/0 4/0 89.11 CIRCUNFERENTIAL MELDS 5/0 5/0 5/0 19 VOLUMETRIC RCS PIP Itt6:10"-NPS SURFACE VOLUMETRIC RCS PIPING t 12'-NPS SURFACE<<<<<<<<<<NOTE:NUllBER TO EXAtlINEl GREATER THAH 25X DUE TO EXCEEDING STRESS CRITERIA OR ARE TERMINAL ENDS PER TABLES-NOTE 1.89.11 CIRCUtlFERENTIAL MELDS 0/0 0/0 1/0 89.11 CIRCUtlFEREN'AXIAL MELDS<<<<<<<<<<NDTE:NUMBER TO EXAttlttEl CIRCUNFERENTIAL MELDS<<<<<<<<<<NOTE:NUMBER TO EXANINEl 2/0-NOTE 1.VOLUMETRIC SI PIPING'2'-tlPS SURFACE GREATER THAN 25X DUE TO EXCEEDING STRESS 49 16/0 16/0 17/0 CRITERIA OR ARE TERNIHAL ENDS PER TABLES-NOTE 1.VOLUMETRIC RCS PIPING-NPS 19 2/0 2/0 SURFACE GREATER THAN 25X DUE TO EXCEEDIH6 STRESS CRITERIA OR ARE TERtllNAL ENDS PER TABLES 89.11 C IRCUtlFERENT IAL MELDS VOLUMETRIC Sl PIPING'0'"tlPS SURFACE 1/0 1/0 2/0 89.11 CIRCUtlFEREHT IAL MELDS<<<<<<<<<<tlOTE;NUMBER TO EXAttINE!VOLUtlETRIC Sl PIP It(6: 6'-NPS SURFACE GREATER THAN 25X DUE TO EXCEEDING STRESS 162'Q/Q 5Q/0 62/0 CRITERIA OR ARE TERMINAL ENDS PFR TABLES NOTE 1 89.12 LONGITUDINAL MELDS 89~12 LONGITUDINAL MELDS VOLUNETRIC RCS HAIN COOLANT 42'-HPS SURFACE VOLUNETRIC RCS tlAIN COOLANT ZO'-NPS SURFACE 56 2/0 2/0 4/0 6/0 6/0 8/0 89~21 C IRCUNFERENT IAL MELDS SURFACE RCS P IP INDE 3'-HPS 47 4/0 4/0 4/0'9.21 CIRCUttFERENTIAL MELDS.SURFACE RCS PIPING'.5'-NPS 19 4/0 4/0 6/0<<<<<<<<<<NO'TE tNUt}BER TO EXANIHEl GREATER THAN 25X DUE TO EXCEEDIHG STRESS CRITERIA OR ARE TERMINAL EttDS PER TABLES-NOTE 1.89.21 CIRCUMFERENTIAL MELDS SURFACE RCS PIPING: 2'-NPS 1/0 1/0 1/0 B9.21 CIRCUMFERENTIAL MELDS SURFACE CH PIPING: 2'-NPS 4 1/0 1/0 2/0 DATE'.08/25/87 REVISIOtt ST.LUCIE tiUCLEAR PLANT UtilT 1 INSERVICE INSPECTION PLAN FOR TRE FIRST INTERVAL C~ASS I SECTIOti Xl SuttttARY TABLE A PAG"": 17 CATEGORY 8-J-PRESSURE RETAINING MELOS IN PIPING'SttE SEC, XI ITEtt 4 ITEN DESCRIPTIOH EXAtt METHOD SYSTEit DESCRIPTIOH 0 OF COttPOHEHTS NUMBER OF RELIEF SCHEDULED/CottPLETED ZONE COttPONENTS RED.1ST PER 2HD PER 3RD PER 89.21 CIRCUttFERENTIAL MELDS SURFACE Sl PIPING: 3'-NPS 20 6/0 6/0 8/0 m+www ttOTE:NUMBER TO EXAttIHE: GREATER THAtt 25X DUE TO EXCEEDING STRESS CRITERIA OR ARE TERMINAL ENDS PER TABLES-NOTE 1~B9.21 C I RCUHFERENT I AL MELDS B9.22 LOHSII'UDIHAt.

MELDS 89 31 NOMINAL PIPE SIZE)=4 IH 89.32 HOMINAL PIPE SIZE<4 IH.89.32 NOttINAL PIPE SIZE<4 IH.B9.32 ttOttltiAL PIPE SIZE<4 IH.SURFACE S I PIP IttG!2'-HPS SURFACE RCSrSI N/A RCS 12'CS 2'CS 3'l 2'5 1/0 1/0 0/0 0/0 0/0 I/O 0/0 I/O 0/0 0/0 0/0 I/O 2/0 0/0 1/0 1/0 0/0 I/O B9.40 SOCKET MELDS e 8'9,40 SOCKET MELDS SURFACE RC 2'URFACE CH 2'9 97 6/0 8/0 6/0 8/0 6/0 9/0

DATEt 08/25/87 REVISIONS ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUtttlARY TABLE A?AGE: 18 ASHE SEC.XI ITEN 4 ITEN DESCRIPTION EXAM METHOD SYSTEM DESCRIPTION 5 OF COttPOttEMTS NUttBER OF RELIEF SCHEDULED/COti?LETED ZONE COMPONENTS REQ.1ST PER 2ND PER 3RD PER 810, 10 P IP ING-INTEGRALLY NELDED VOLUMETRIC Sl 6'-SI-110 ATTACHttENTS SURFACE ttOTE:NUMBER OF CONPOttENTS:

LUGS, LOCATED AT A PENETRATION.

810.10 PIPING-IMTEGRALI.Y NELDED VDLUttETRIC Sl 6'-Sl-111 ATTACHNENTS SURFACE mwa%f ttOTE,'NUMBER OF COMPONENTS:

LUGS, LOCATED AT A PENETRATION.

810.10 PIPING-INTEGRALLY NELDED VOLUtlETRIC Sl 6'"Sl-112 ATTACHNENTS SURFACE%aw<w NOTE cNUttBER OF CONPONENTS'.

LUGS, LOCATED AT A PENETRATION.

810.10 PIPING" INTEGRALLY NELDED VOLUMETRIC Sl 6"-S1-113 ATTACHNENTS SURFACE t+a+a NOTE.NUMBER OF CONPONENTS

~LUGS, LOCATED AT A PENETRATIOM.

B10.20 PUMPS-INTEGRALLY NELDED.VOLUMETRIC RCP IAI t ATTACHMENTS SURFACE~w%w+NOTE lNUtlBER OF COMPONENTS:

LUGS 810,20 PUttPS-INTEGRALLY NELDED VOLUMETRIC RCP IA2 ATTACHNctiTS SURFACE~law+NOTE:NUttBER OF COttPONENTSl LUGS 810,20 PUNPS-INTEGRALLY NELDED VOLUMETRIC RCP 181 ATTACHMENTS SURFACE%wwt+NOTE lNUttBER OF COttPONENTS!

LUGS 810.20 PUttPS-INTEGRALLY NELDED VOLUMETRIC RCP 183 ATTACHMENTS SURFACE<wwwa MOTE:NUMBER OF CONPONENTS:

LUGS 1/0 1/0 2/0 0/0 1/0 1/0 1/0 I/O 0/0 1/0 0/0 I/O 4/0 0/0 0/0 0/0 0/0 4/0 0/0 4/0 0/0 0/0 0/0 4/0 810.30'VALVES-INTEGRALLY NELDED VOLUMETRIC RCS N/A ATTACHNENTS SURFACE 0/0 0/0 0/0 OATEN'8/25/8/

REVISION.'T, LUCIE NUCLFAR PLANT UNIT 1 INSERVICE INSPECTION

>LAN FOR TOE FIRST INTERVAL CLASS 1 SECTION XI SUNNARY TABLE A PAGE: 19 EXAN NETHOD SYSTEN DESCRIPTION CATEGORY 8-L-I-PRESSURE RETAINING MELDS IN PUNP CASING ASNE SEC.XI ITEN 0 ITEN DESCRIPTION 4 OF CONPONENTS NUNBER OF RELIEF SCHEDULED/CONPLETED ZONE CONPONENTS REQ 1ST PER 2ND PER 3RD PER 812~10 PUNPS-PUNP CASING WELDS.VOLUNETRIC RCS RCP-IA1, lA2,181,182 wf>%4 NOTE:SEE RELIEF REQUEST.4 RR-7 0/0 0/0 0/0 DATE: 08/25/87 REV I SION l I ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAtt FOR THE FIRST INTERVAL CLASS I SECTION Xl SUttNARY TABLE A PAGE: 20 t CATEGORY B-L-2-PUMP CASINGS ASNE SEC.Xl ITEtl tt ITEN DESCRIPTION EXAtt HETHOD SYSTEN DESCRIPTION 0 OF CONPOttENTS NUttGER OF RELIEF SCHEDULED/CONPLETED ZONE COttPONEHTS REQ 1ST PER 2ND PER 3RD PER B12.20 PUHPS-PUtlP CASINGS VT-3>~>~>NOTE:SEE RELIEF REQUEST.RCS RCP-1A1,1A2,1B1,1B2 4 RR-7 0/0 0/0 0/0 DATEt 08/25/87 REVISION: I ST, LUCIE ttUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST IttTERVAL CLASS I SECTION II

SUMMARY

'ABLE A PAGE: 21 CATEGORY B-N-I-PRESSURE RETAINING MELDS IN VALVE BODIES ASifE 0 OF COMPONENTS SEC.TI NUMBER OF R'ELIEF SCHEDULED/COMPLETED ITEN 4 ITEN DESCRIPTION EXAM ttETHOD SYSTEN DESCRIPTION ZONE COMPONENTS RED.IST PER 2ND PER 3RD PER 812,30 VALVES-VALVE BODY MELDS (4 SURFACE RCS,SI NONE INCHES ttDNINAL PIPE SIZE 812,40 VALVES-VALVE BODY MELDS>=4 VOLUttETRIC RCS)SI NONE INCHES NONINAL PIPE SIZE 0/0 OIO 0/0 0/0 OIO 0/0 DATE: Oa/25/87 REVISION!1 ST, LUCIE NUCLEAR PLANT UNiT I INSERVICE INSPECT'ION PLAlt FOR THE FIRST INTERVAL CLASS I SECTIOtl XI

SUMMARY

TABLE A PAGE: 22 CATEGORY 8-M-2-VALVE BODIES ASME SEC.XI ITEM 4 ITEM DESCRIPTION 0 OF COttPOtlEtlTS tlUMBER OF RELIEF SCHEDULED/COMPLETED EXAM METHOD SYS'IEtt DESCRIPTION ZONE COMPONENTS RED.IST PER 2ND PER 3RD PER B12.50 VALVES-VALVE BODIES EXCEEDING 4 INCHES NOMINAL PIPE SIZE%+e+w NOTE:NUMBER TO EXAMINE!812.50 VALVES-VALVE BODIES EXCEEDING 4 INCHES ttOMINAL PIPE SIZE%%saw NOTE:NUMBER I'0 EXAMIttE: B12.50 VALVES-VALVE BODIES EXCEEDING 4 INCHES NOMINAL P!PE SIZE+<a<w tlDTE!NUMBER TO EXAMINE!INTERN VT-3 RCS,SI 12'ALVES EXAMINE NHEN DISASSEMBLED.

INTERtl VT-3 RCS,SI 10'ALVES EXAMINE NHEN DISASSEMBLED.

INTERN VT-3 RCS,SI 6'ALVES EXAMINE MHEN DISASSEMBLED.

8 RR 8 0/0 0/0 0/0 4 RR-8 0/0 0/0 0/0 8 RR-8 0/0 0/0 0/0 DATE: 08/25/B7 REV IS ION t ST.LUCIE NUCLEAR PLANT UNIT 1 IttSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION Xl SUNttARY TABLE A PAGE: 23 EXAti ttETHOD SYSTEtt DESCRIPTION t CATEGORY B-N-I-INTERIOR OF REACTOR VESSEL ASttE SEC.XI ITEtt tt ITEtt DESCRIPTION I OF CONPDNEttTS NUNBER OF RELIEF SCHEDULED/CONPL'ETED XONE CONPONENTS RED, 1S'I PER 2ND PER 3RD PER B13.10A REACTOR VESSEL-VESSEL INTERIOR VISUAL VT-3 RCS RPV www4w NOTE lEXAttlttE ACCESSIBLE AREAS EACH PERIOD.1/0 1/0 1/0 B13.10B REACTOR VESSEL-CDRE BARREL VISUAL VT-3 RCS RPV t%wia NOTE;EXAttINE ACCESSIBLE AREAS EACH PERIOD.1/0 I/0 I/0 DATE: 08/25/87 ST.LUCIE NUCLEAR PLANT UNIT I REV IS IOtt.'I INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION Xl SUN))ARY TABLE A CATEGORY B-N-2" INTEGRALLY MELDED CORE SUPPORT STRUCTURES AND INTERIOR ATTACHMENTS TO BMR VESSEL PAGE: 24 AS)tE SEC.Xl ITEN 4 ITEN DESCRIPTION EXA)t METHOD SYSTEtt DESCRIPTION 0 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS REQ.IST PER 2ND PER 3RD PER 813,50 REACTOR VESSEL (PMR)-INTERIOR VISUAL VT-I RCS RPV ATTACH)(ENTS MITHIN BELTLINE REGION afaaw NOTE:EXAMINE AL).MELDS EACH INTERVAL.B)3.60 REACTOR VESSEL (PMR)-INTERIOR VISUAL VT-3 RCS RPV ATTACH)(ENTS BEYOND BELTLINE REGION w>w~w NOTE'.EXAt)INE ALL MELDS EACH INTERVAL.0/0 0/0 0/0 0/0 0/0 0/0 DATE.08/25/87 REVISION: I ST.LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION XI SUtNARY TABLE A EXA)(NETHOD SYSTEN DESCRIPI'ION e CATEGORY 8-N-3-RENOVABLE CORE SUPPORT STRUCTURES IN 8'AR VESSEL ASNE SEC.Xl ITEt(4 ITE)(DESCRIPTION 4 OF CG)(PONENTS ttUt(BER OF RELIEF SCHEDULED/COt(PLETED ZONE CONPONENTS REO.lST PER 2ttD PER 3RD PER 813.70A REACTOR VESSEL (PNR)-CORE VISUAL VT-3 RCS RPV SUPPORT STRUCTURE<>,t(OTE;EXA))lt(E SURFACES EACH INTERVAL, B(5.70B REACTOR VESSEL (P)(R)-CORE VISUAL VT-3 RCS RPV BARREL a+wtw NOTE HEXA)(INE 100X UPON REt(OVAL FROH RPV 0/0 0/0 0/0 dI 0/0 0/0 0/0 DATE: 08i 25/87 REVISION: 'ST.LUCIE NUCLEAR j'LANT UNIT I INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION XI

SUMMARY
TABLE A PAGE: 26 EXAM METHOD SYSTEM DESCRIPTION CATEGORY B-0-PRESSURE RETAINING NELDS IN CONTROL ROD HOUSINGS ASHE SEC.Xl ITEN 4 ITEN DESCRIPTION 4 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS REQ IST PER 2ND PER 3RD PER BI4.10 REACTOR VESSEL-MELDS IM VOLUMETRIC RCS RPV-CLOSUR CONTROL ROD DRIVE HOUSIilGS SURFACE NOTE'.EXAMINE 10X OF PERIPHERAL HOUSINGS, END OF INTERVAL 12 0/0 0/0}/0 PAGE: 27 0 OF CDMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EXAM METHOD SYSTEM DESCRIPTIOH ZONE COMPDNENTS RED 1ST PER 2HD PER 3RD PER ST~LUCIE NUCLEAR PLANT UHIT 1 IHSERVICE INSPECTION PLAN FOR THE FIRST IHTERVAL CLASS 1 SECTION XI
SUMMARY
t TABLE A CATEGORY B-P-ALL PRESSURE RETAININ6 COMPONENTS IN REACTOR VESSEL ASME SEC, XI ITEM 4 ITEM DESCRIPTION B15.10 REACTOR VESSEL-SYSTEM LEAKAGE VISUAL VT-2 TEST~~>>+NOTE:EXAMINE ALL CLASS 1 COMPONENTS B15.11 REACTOR VESSEL-SYSTEM VISUAL VT-2 HYDROSTATIC TEST~wwww NOTE:EXAMINE ALL CLASS 1 COMPOHENTS 815.20 PRESSURIZER-SYSTEM LEAKAGE VISUAL VT-2 TEST>%+++NOTE lEXAMINE ALL CLASS 1 COMPOHENTS B15 21 PRESSURIZER-SYSTEM HYDROSTATIC VISUAL VT-2 TEST+>+++NOTE:EXAMINE ALL CLASS 1 COMPOHENTS ALL CLASS 1 AND SYSTEMS.EACH REFUELIHG OUTAGE.ALL CLASS 1 AHD SYSTEMS.OHE TEST AT OR HEAR END OF INTERVAL, ALL CLASS I AND SYSTEMS.EACH REFUELIHB OUTA6E~ALL CLASS 1 AND SYSTEMS.ONE TEST AT OR HEAR END OF INTERVALED 1/0 1/0 1/0 0/0 0/0 1/0 1/0 1/0 1/0 0/0 0/0 1/0 815 30 STEAM 6EHERATQRS-SYSTEM
'ISUAL VT-2 LEAKAGE TEST wwaa~NOTE.'EXAMINE ALL CLASS 1 COMPDNENTS B15.31 STEAM GENERATORS-SYSTEtl VISUAL VT-2 HYDROSTATIC TEST+++w~HOTE:EXAMINE ALL CLASS I COMPONENTS ALL CLASS I AND SYSTEMS.EACH REFUELIHG OUTAGE ALL CLASS 1 AHD SYSTEMS.OHE TEST AT OR NEAR EHD OF INTERVAL 2/0 2/0 2/0 0/0 0/0 2/0 B15.40 B15, 41 HEAT EXCHAH6ERS-SYSTEM LEAKAGE VISUAL VT-2 TEST>ww+w NOTE:EXAMINE ALL CLASS 1 COMPONENTS HEAT EXCHAHGERS-SYSTEM VISUAL VT-2 HYDROSTATIC TEST w<>>+NOTE:EXAMIHE ALL CLASS 1 COMPONENTS ALL CLASS 1 AND SYSTEMS.EACH REFUELING OUTAGE.ALL CLASS 1 AND SYSTEMS.ONE TEST AT OR HEAR END OF INTERVAL.4/0 4/0 4/0 0/0 0/0 4/0 B15.50 PIPING-SYSTEM LEAKA6E TEST VISUAL VT-2 ALL CLASS 1 4 w4wf~NOTE:EXAMINE ALL CLASS I COMPONENTS AHD SYSTEMS~EACH REFUELIH6 OUTAGE:RCS, RC, CVCS)Sl 4/0 4/0 4/0 B15 51 PIPING-SYSTEM HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 1 4 0/0 0/0 4/0~++~+NOTE:EXAMINE ALL CLASS 1 COMPONENTS AHD SYSTEMS.ONE TEST AT OR NEAR END OF INTERVAL.:RCS}RC}CVCS)SI i'15 60 PUMPS-SYSTEM LEAKAGE TEST VISUAL VT-2 ALL CLASS 1 4~%H~NOTE;EXAMINE ALL CLASS 1 COMPOHENTS AHD SYSTEMS, EACH REFUELIHG OUTAGE, 4/0 4/0 4/0 615.61 PUMPS-SYSTEM HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 1 4 0/0 0/0 4/0~~~~+NDTE:EXAMINE ALL CLASS 1 COMPOt(ENTS AND SYSTEMS.OHE TEST AT OR NEAR EHD OF INTERVALED DATE: 08/25/87 REVISIONS 1 ST.LUCIE NUCLEAR PLANT UNIT 1 IHSERVICE INSPECTION PLAN FOR THE FIRST IHTERVAL CLASS 1 SECTION XI
SUMMARY
TABLE A PAGE: 28 CATEGORY B-P ASME SEC.XI ITEM 4 ITEM-ALL PRESSURE RETAINIHG COMPONENTS IH REACTOR VESSEL DESCRIPTIOH I OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EXAM METHOD SYSTEM DESCRIPTIOH ZONE COMPONENTS REQ 1ST PER 2HD PER 3RD PER B15,70 VALVES-SYSTEM LEAKAGE TEST, VISUAL VT-2 ALL CLASS 1 ALL w~w~a NOTE:EXAMINE ALL CLASS 1 COMPONENTS AHD SYSTEMS.EACH REFUELING OUTAGE.:PART OF PIPING SYSTEM 1/0 1/0 1/0 815'1 VALVES-SYSTEM HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 1 ALL 0/0 0/0 I/O~wl~w NOTE;EXAMINE ALL CLASS 1 COMPOHENTS AND SYSTEMS, ONE TEST AT OR NEAR END OF INTERVAL, APART OF PIPING SYSTEM OATEN'8/25/87)EVI SION: I t CATEGORY B-Q-STEAM GENERATOR TUBING ASME SEC, XI ITEM tt ITEM DESCRIPTION ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI
SUMMARY
TABLE A PAGE: 29 EXAM METHOD SYSTEM DESCRIPTION 0 OF COMPONENTS NUMBER OF RELIEF, SCHEDULED/COMPLETED ZONE COMPONENTS REQ, 1ST PER 2ND PER 3RD PER Blb.20 STEAl1 GENERATOR TUBING IN U.VOLUMETRIC RCS SG-IA-TUBE DESIGN>>>>+NOTE:EXAMINE PER TECH.SPEC.REQUIREMENTS.
0/0 0/0 0/0 B16,20 STEAM GENERATOR TL'BING IN U VOLUMETRIC RCS SG-IB-TUBE DFSIGN>>>>w tkDTE:EXAMINE PER TECH.SPEC.REQUIREMENTS.
0/0 0/0 0/0 RPPENOI 8 B CLRSS 2 EXRMINRTION SUMMRRY TRBLES DATE: 08/25/87 REV IS ION: I ST.LUCIE NUCLEAR PLANT UttIT 1 IttSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTlOtt Xl
SUMMARY
TABLE 8 PAGE: I CATEGORY C-A-PRESSURE RETAlttING ASNE SEC.XI ITEN 4 ITEN DESCRIPTION ttELDS IH PRESSURE VESSELS EXAN NETHOO SYSTEN DESCRIPTIOtl 4 OF COt!POHENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COt!PONEHTS RED.1ST PER 2ttD PER 3RD PER Ci.!0 SHELL CIRCUMFERENTIAL TELOS VOI.UMETRIC ttSS S/6 1A Cl 10 SHELL CIRCUttFERERTIAL ttELDS VOLUMETRIC t!SS S/6 18 C!~20 HEAD CIRCUMFEREttTIAL ttELDS VOLUNETRIC NSS S/6 lA C1,20 HEAD CIRCUttFEREHTIAL TELOS VDLUMETRIC NSS S/6 18 C!.20 HEAD CIRCUNFERENTIAL ttELDS VDLUMETRIC NSS SHE!A C!,20 HEAD CIRCUMFEREltTIAL HELDS VOLUMETRIC NSS SHE 18 C1.30 TUBESHEET-TO-SHEI.L ttELDS.C1.30 TUBESHEET-TO-SHELL MELDS VOLUMETRIC MSS S/G!A VOLUMETRIC NSS S/G 18 C!.30 TUBESHEET-TO-SHELL MELDS VOLUMETRIC Sl SHE 1A I:1.30 TUBESHFET-TO-SHELL
'AELDS VOLUNETRIC SI SHE 18 41 42 41 2 42 2 56 42 0/0 0/0 0/0 1/0 I/O 1/0 0/0 0/0 0/0 0/0 1/0 0/0 0/0 1/0 0/0 0/0 0/0 0/0 1/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 1/0 DATE.'08/25/87 REViSION: 1 ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FGR THE FIRST INT RVAL CLASS 2 SECTION Xl SU<st(ARY TABLE 8 PAB.": 2 CATE GRY C-8-PRESSURE RETAININ6 NOZZLE MELDS IN VESSELS ASNE SEC.XI ITEN 4 ITEt(DESCRIPTION 4 OF CGt(POt(Et(TS t(UMBER QF RELIEF SCHEDULED/COMPLETED EXAM t(ETHOD SYSTEN DESCRIPTION ZONE CQt(PDNEt(TS RED.1ST PER 2ND PFR 3RD PER C2~10 NGZZLES Iit VESSELS (=1/2 IN.tiQNINAL THICKtiESS iiSS, FM, SI, N/A 0/0 0/0 0/0 C2~11 NOZZLE-TO-SHELL (GR HEAD)MELD SURFACE NSSi FM, Sl C2.21 NOZZLE-TO-SHELL (OR HEAD)MELD SURFACE S/6 IA VOLUMETRIC C2.21 NOZZLE-TO-SHELL (OR HEAD)MELD SURFACE S/6 18 VOLUt(ETRIC C2.21 NOZZLE-TO-SHELL (QR HEAD)MELD SURFACE Si SHE 1A VGLUNETRIC 42 0/0 0/0 0/0 1/0 1/0 0/0 0/0 0/0 2/0 0/0 0/0 0/0 C2.21 NOZZLE-TO-SHELL (OR HEAD)WELD SURFACE Sl SHE 18 VOLUMETRIC 0/0 0/0 0/0 C2~22 C2.22 NOZZLE INSIDE RADIUS SECTION VOLUt(ETRIC S/6 1A NOZZLE INSIDE RADIUS SECTION.VOLUMETRIC S/6 18 C2.30 NOZZLES MITH REINFORCIN6 PLATE IN VESSELS>1/2 IN.NONlttAL THICKNESS N/A C2~22 NOZZLE INSIDE RADIUS SECTION VOLU)(ETRIC SI SHE IA C2.22 NOZZLE INSIDE RADIUS SECTION VOLUNETRIC Sl SHE 18 41 42 56 I/O 1/0 0/0 0/0 0/0 2/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 C2.31 REINFORCINB PLATE MELDS TG NOZZLE AND VESSEL SURFACE N/A 0/0 0/0 0/0 C2.32 NOZZLE-TO-SHELL (OR HEAD), VOLUt(ETRIC N/A WELDS WHEN INSIDE OF VESSEL IS ACCESSIBLE 0/0 0/0 0/0 C2.33 ttOZZLE-TO-SHELL (OR HERD)VISUAL VT-2 N/A MELDS WHEN INSIDE OF MELD IS INACCESSIBLE 0/0 0/0 0/0 DATE'.08/25/87 REVISIONl I I L""'UCLEAR PLA'tT U"IIT 1 It<SERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTION XI
SUMMARY
TABLE 8?AG-:l CATEGORY C C INTEGRAL ATTACHHENTS FOR PRESSURE VESSELS ASt!E SEC.XI KTEtl 4 KTEH DESCRIPTIDN 4 OF COt!PONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EXAM HETHOD SYSTEM DESCRIPTION ZONE COttPONENTS R Q.1ST PER 2ND PER 3RD?ER C3 IO PRESSURE VESccLS INTEGRALLY SURFACE S/6 1A WELDED ATTACH"ENTS 41 2/0 OIO 2IO C3.10 PRESSURE VESSELS-INTEGRALLY SL'RFAC'E S/6 18 WELDED ATTACHttENTS 0/0 2/0 2/0 C3~20 PIPING INTEGRALLY WELDED SURFACE t!SS ATTACHHENTS 0/0~2/0 2/0 C3~20 P IP ING-INTEGRALLY MELDED ATTACHMENTS C3.20 PIPING-INTEGRALLY MELOED ATTACHMENTS SURFACE HSS SURFACE iHSS 0/0 5/0 0/0 0/0 0/0 0/0 C3.20 PK Pl ttG-IttTEBRALLY WELDED SURFACE t!SS ATTACHttENTS 0/0"0/0 0/0".3.20 PIPING-INTEGRALLY MELDED SURFACE FM ATTACHMENTS 67 I/O 0/0 0/0 C3.20 PIPING-INTEGRALLY WELDED SURFACE FW ATTACHMENTS 68 1/0 0/0 0/0 C3.20 PIPING-INTEGRALLY WELDED ATTACHMENTS SURFACE FW 71 0/0 1/0 0/0 C3.20 PIPING-INTEGRALLY WELDED Al'TACHt!EHTS SURFACE FW 72 0/0 0/0 0/0 C3.30 PUMPS-INTEGRALI.Y WELDED ATTACHHcHTS SURFACE Sl LPSI PUi'IPS 0/0 I/O 1/0 C3.30 PUMPS-INTEGRALLY WELDED ATTACHMENTS C3 30 PUttPS-INTEGRALLY WELDED ATTACHHENTS SURFACE SI HPSI PUttPS SURFACE SI CHARGING PUMPS 1/0 I/O 1/0 I/O I/O 1/0 C3.40 VALVES-INTEGRALLY WELDED SURFACE ALL N/A ATTACHHENTS 0/0 0/0 0/0 DATE: 08/25/G7 ST.LUCIE NUCLEAR PLANT UNIT I REVI SION,'INSERVICE INSPECTION PLAN FOR TH" FIRST INTERVAL CLASS 2 SECTION XI
SUMMARY
TABLE B CATEGORY C-D-PRESSURE RETAINING BOLT'ING GREATER THAN 2 INCHES IN DIAMETER IN PRESSURE VESSELS PAGEOS 4 ASME SEC.XI ITEM 4 ITEM DESCRIPTION 0 OF COMPONENTS NUMBER OF RELIEF SCHFDL'LED/COMPLETED EXAM METHOD SYSTEM DESCRIPTION ZONE COMPONENTS REQ, IST PER 2ND PER 3RD PER C4.10 PRESSURE VESSELS-BOLTS AND STUDS VDLUMETRIC ALL N/A 0/0 0/0 0/0 C4.20 PIPING-BOLTS AND STUDS C4~30 PUMPS-BOLTS AND STUDS C4.40 VALVES-BOLTS AND STUDS VOLUMETRIC ALL N/A VOLUMETRIC ALL N/A VOLUMETRIC ALL N/A 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 GATE: 08/25/87 REVISION: ST.LUCIE ttUCLEAR PLANT UHIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST!ttTERVAL CLASS 2 SECTION X!SUNiNARY TABLE 8 PAGE: 5 CATEGORY C-F-I-CODE CASE N-408 TABLES ASttE 4 QF COMPONENTS SEC.Xi tlUNBER OF RELIEFSCHEDULED/CQNPLETED ITEN tt ITEit DESCRIPTIGH EXAN NETHOD SYSTEN DESCRIPTION ZONE CQttPGNENTS REQ, IST PER 2HD PER 3RD PER C5 li CIRCUNFEREttTIAL MELDS+axe+ttOTE:tt OF CONPONENTS:
C5.11 CIRCUttFEREttT IAL MELDS~~~%~HOTE:tt QF COtlPONEHTS:
SURFACE VDLUiNETRIC NECESSARY TO SURFACE VGLUt!ETRIC NECESSARY TO SI 6'4 12 NEET 7,5X OF Sl MELDS PER C-F-1.HPSI 6'1 22 NEET 7.5X OF Sl MELDS PER C-F"i.4/0 4/0 4/0 3/0 3/0 4/0 C5 F 11 CIRCUttFERENTIAL MELDS aw%wt HQTE lB CF CGNPGHENTSl C5.12 LOHGITUDlttAL MELDS SURFACE VOLUrETRIC NECESSARY TO SURFACE VOLUNETRIC HPSI 6~62 25 NEET 7.5X OF Sl MELDS PER C-F-I 3/0 3/0 4/0 0/0 0/0 0/0 C5.21 CIRCUNFEREHTIAL MELGS UT-PT HPSI 3'IRCUMFERENTIAL MELDS CIRCUMFERENTIAL MELDS UT-PT HPSI 4'T-PT HPSI 3'T-Pl'PSI t C5.21 C5~21 C5,22 LONGITUDINAL MELDS C5.30 SOCKET MELDS C5.30 SOCKET MELDS C5.30 SOCKET MELDS C5,30 SOCKET MELDS C5.30 SOCKET MELDS HPSI 2'PSI 2'PSI 2'PSI 2'PSI 2'PSI 2" PT PT PT PT C5.41 BRANCH CONNECTORS
>"-2'PS-PT CIRCUMFERENTIAL MELDS 61 62 13 62 34 83 30 87 156 84 29 85 35 86 39 I/O 1/0 0/0 0/0 1/0 1/0 I/O 0/0 3/0 0/0 0/0 0/0 4/0 0/0 0/0 8/0 4/0 8/0 0/0 4/0 0/0 0/0 0/0 5/0 0/0 5/0 0/0 0/0 1/0 0/0 C5.41>>RANCH COHNECTGRS
>=2'PS-PT CIRCUtiFEREHTIAL MELDS HPSI 2'/O 0/0 0/0 C5.42 BRANCH CONNECTORS
>-" 2'PS-PT PT LQNGITUDIt(AL MELDS HPSI NONE 0/0 0/0 0/0 MELDS T<.375'EXEMPT-N-408 Sl 12'3 71 0/0 0/0 0/0 DATE: 08/25/87 REVISION,'
ST.LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPECTION PLAN FGR THE FIRST INTERVAL CLASS 2 SECTION XI SUtlt!ARY TABLE 8 PAGE:.ATEGORY C-F-l-CODE CASE N-408 TABLES ASNE SEC.Xi ITEN 5 ITEN 5=SCRIPTION FXAtl METHOD SYSTFN DESCRIPTION tt OF COMPONENTS NUMBER OF RELIEF SCHEDULED/CONPLETED ZONE CONPGNENTS RED.IST PER 2ND PER 3RD F'ER C5,43 HELDS T<.375'XEMPT N-408 Sl 10'3 27 0/0 0/0 0/0 C5.43'AELDS I<.375'EXEMPT-N-408 SI 12'4 22 0/0 0/0 0/0 C5.43'AELDS T<.375'EXEMPT-N-408 SI 6" 44 27 0/0 0/0 0/0 C5~44 CIRCUNFERENTIAL NELDS-EXENPT-M-408 SD CLG 10'9 23 0/0 0/0 0/0 C5 44 CIRCUNFEREHTIAL TELOS-EXEMPT" H-408 SD CLG, 10'0 35 0/0 0/0 0/0 C5,44 CIRCUNFERENTIAI.
ltELDS-EXFNPT-N-408 SD CLG.10'1 30 OIO 0/0 0/0 ,5.44 C5.44 CIRCUNiERENTIAL MELDS-EXEMPT-N-408 CIRCUMFERENTIAL MELDS-EXEMPT-N-408 SD CLG IOr SD CLOD 24'2 20 70 61 0/0 0/0 0/0 0/0 0/0 0/0 C5.44 CIRCUNFEREMTIAL MELDS-EXENPT H 408 HPSI)LPS I)SUCTION 24'.73 18 0/0 0/0 0/0 C5~44 CIRCLNF REHTIAL-M-408 NELDS-EXENPT HPSI,LPSI,SUCTION 14'3 30 0/0 0/0 0/0 C5 44 CIRCUtliEREHTIAL MELDS-EXEMPT-N-408 HPSI)LPSI,SUCTIGM 6'3 16 0/0'/0 0/0 C5.44 CIRCUMFERENTIAL
-N-408 NELDS-EXEtlPT HPSI,LPSI,SUCTION 24'4 30 0/0 0/0 0/0 C5.44 CIRCUNFEREHTIAL
-N-408 NELDS-EXEMPT, HPSI,LPSI)
SUCTION 14'4 29 0/0 0/0 0/0 C5.44 CIRCUMFERENTIAL NELDS-EXEMPT-N-408 HPS I, LPS I, SUCTION 8'4 l2 0/0 OI 0 0/0 C5.44 CIRCUtlFEREHTIAL NELDS-EXEtlPT-N-408 HPSI,LPSI,SUCTION 6'4 22 0/0 0/0 0/0 DAT.:: 08/2'./87 REV IS I OH: 1 ST~LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPECTIOH PLAN FOR THE FIRST INTERVAL CLASS 2 SECTION XI
SUMMARY
TABLE 8?AGE: 7 CATEGORY C-F-1-CODE CASE H-408 TABLES ASNE SEC.XI ITEN 4 ITEN DESCRIPTION EXAM METHOD SYSTEi1 DESCRIPTION 8 OF COMPONENTS NUNBER OF RELIEF SCHEDULED/COiIPLETED ZONE COMPOHENTS RED.1ST PER 2ND PER 3RD P:R C5.44 CIRCUHFEREH'IIAL MELDS-EXEMPT-H-408 SD CLG.)SI, C.S.10'5 0/0 0/0 0/0 C5.44 CIRCUHFERENT!AL MELDS-EXEMPT-N-408 SD.CLG., SI, C,S.12'6 19 0/0 0/0 0/0 C5.44 CIRCUMFERENTIAL MELDS-EXEMPT-H-408 SD CLG., Sl, C~S.12'7 0/0 0/0 0/0 C5~44 CIRCUMFERENTIAL MELDS EXEMPT-N-408 SD CLG., SI, C.S.10'7 0/0 0/0 0/0 C5.44 CIRCUMFERENTIAL MELDS-EXEMPT-, N-408 C5.44 CIRCUMFERENTIAL MELDS-EXEMPT-N-408 t'5.44 CIRCUNFEREHTIAL MELDS-EXEMPT-H-408 SD CLG., SI, C.S.6'7 SD CLG~)Sl)C~S~12'8 19 SD CLG.)SI)C, S.8'8 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 C5.44 CIRCUMFERENTIAL MELDS-EXEHPT-H-408 C~S.12" 79 38 0/0 0/0 0/0 C5,44 CIRCUMFERENTIAL MELDS-EXEHPT-'1-408 C.S.12'0 34 0/0 0/0 0/0<<<<4 EXEMPT CIRCUMFERENTIAL MELD SUP!NARY<<%<<24'109 14'59 12'211 f0'148 8'l3 6'67 TOTAL-607 DATE: OS/25/87 REVISION: ST, LUCIE NUC'EAR PLANT UNIT 1 INSERVICE INSPFCTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTIO!i Xl SUHHARY TABLE 8 RASE: 8 t CATEGORY C-F-2-CODE CASE H-408 AStlE SEC.XI ITEtl 4 ITEil DESCRIPTIOH
".XAH HETHOD SYSTEH DESCRIPTION 4 OF COilPONEHTS HUHBER OF RELIEF SCHEDULED/COHPLETED ZOtiE COHPONENTS RED~IST ER 2,'iD PER 3RD PER C5.51 PIPI!JS>=3/STI-".NPS-CIRCUHFERENTIAL MELDS HT PT tlSS 36'/0 0/0 0/0 C5.51 PIPltiS>=3/ST;4 NPS-CIRCUHFERENTIAL MELDS C5.51 PIPINS>=3/BTi 4 NPS-CIRCUHFERENT I AL MELDS HT PT tlT PT HSS 34" HSS 35'3 12 64 0/0 2/0 0/0 0/0 0/0 1/0 C5.51 PIPING>=3/BTI 4 NPS-CIRCUMFERENTiAL MELOS HT PT HSS 34'4 14 0/0 2/0 0/0 C5.51 PIPINS>=3/ST'NPS-CIRCUHFERENTIAL MELDS HT PT HSS 35.5'/0 1/0 0/0 C5~51'IPING>=3/ST;4 NPS" CIRCUHFERENTIAL MELDS HT PT tlSS 34'5 0/0 0/0 0/0:s.si PIPING>=3/BTI 4 NPS-CIRCUHFERENTIAL MELDS HT PT HSS 8'/0 0/0 0/0 C5.51 C5,51 C5.51 PIPINB>=3/ST;4 NPS-CIRCUHFER."NTIAL MELQS PIPING>=3/BTI 4 HPS-CIRCUHFERENTIAL
'AELDS PIPINS>=3/ST)4 NPS-CIRCUHFERENTIAL MELDS tlT PT HT PT HT PT iHSS 6'lSS 35.5'SS 34'5 56 1/0 0/0 0/0 0/0 0/0 2/0 0/0 0/0 I/O C5.51 PIPittB>=3/ST;4 NPS" CIRCUHFERENTIAL MELDS HT PT HSS 8'/0 0/0 0/0 C5.51 C5.51 PIPIHS>"-3/BTI 4 NPS-CIRCUHFERENTIAL MELOS PIPltiS>=3/BTI 4 NPS-CIRCUHFEREHTIAL MELQS HT PT HT UT HSS 6'F 20'7 0/0 0/0 1/0 I/O 0/0 0/0 C5.51 PIPING>=3/ST;4 NPS-CIRCUtlFERENTIAL MELDS tlT UT BF 18'7 I/0 1/0 0/0 C5.51 t PIPING>=3/ST;4 NPS-CIRCUHFERENTIAL MELDS HT UT BF 20'8 10 0/0 0/0 2/0 BATE: 08/2/87 REV IS ION: I ST.LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPFCTIQtt PLAN FOR THE FIRST INTERVAL CLASS 2 SECTION XI
SUMMARY
TABLE 8 PAGE.'TEGORY C-F-2-CODE CASE N-408 ASi!E SEC.Xl ITEM lt I'IEM DcSCRIPTION EXAM t!ETHOD SYSTEM DESCRIPTION 4 OF COMPO!iENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EONE COMPONENTS RED.IST PER 2!tD PER 3RD PER C5.51 PIPltiB>=3/STI 4 NPS-CIRCU!!FERENTIAL NELDS MT UT BF 18'8 I/O 0/0 0/0 C5.51 PIPItiG>=3/STI 4 NPS-CIRCUtlFERENTIAL NELOS tlT UT BF 20'1 0/0 2/0 0/0 C5.51 PIPING>=3/BT;4 NPS-CIRCUMFERENTIAL NELDS MT UT BF 20'2 0/0 0/0 2/0 C5,52 PIPING>=3/BT;4 NPS-LONGITUDINAL NELDS MT UT tlSS 36'/0 0/0 0/0 C5.52 PIPING>=3/ST;4 tiPS-LONGITUDINAL NcLDS UT MSS 34'3 24 0/0 4/0 0/0 C5,52 5.52 PIPING>3/STi 4 NPS LONGITUDINAL NELDS PIPING>=3/BT;4 tiPS-LONGITUDINAL
'AELDS MT.UT ilT UT MSS 36'lSS 34'/0 0/0 2/0 0/0 4/0 0/0 C5 52, PIPING>" 3/STI 4 tlPS LONGITUDINAL NELDS MT UT MSS 35 5" 1/0 I/0 0/0 C5.52 PIPING>='3/ST;4 NPS" LONGITUDINAL TELOS MT UT MSS 34'5 0/0 OIO 0/0 C5.52 PIPING>=3/BT;4 tiPS-LGNBITUDItiAL NELDS tlT UT t!SS 35,5'6 0/0 0/0 2/0 C5.52 PIPING>-3/BTI 4 NPS MT LONGITUDINAL MELDS UT tlSS 34" 0/0 0/0 I/O C5 70 SOCKET ttELDS>4'T C5.81 es~81 BRANCH PIPE CONNECTIONS
>2'T NPS-CIRCUMFERENTIAL NELDS BRANCH PIPE CONNECTIONS
>2'lT NPS-CIRCUMFERENTIAL NELDS MSS, BF MSS 6'lSS 8'5 0/0 0/0 0/0I/O 0/0 0/0 1/0 0/0 0/0 C5.8}BRAiiCH PIPE CONNECTIONS
>2'lT NPS-CIRCUilFERENTIAL WELDS MSS 4'/0 0/0 0/0 OATEN'8/25/87 REVISION: I ST, LUCIE NUCLEAR P'NT UNIT 1 INSERVICE INSPECTION PLAti FOR THE FIRST INTERVAL CLASS 2 SECTION Xl SUttttARY TABLE B PAGE: 10.ATEGORY C-F-2-CODE CASE N-408 ASttE SEC, XI ITEtl 0 ITEtt DESCRIPTION I OF COttPOiRENTS NUNBER OF RELIEF SCHEDULED/COttPLETED EXAN ttETHOD SYSTEtt DESCRIPI'ION IOttE CONPONENTS REQ.IST PER 2ND PER 3RD PER C5.81 BRANCH PIPE COtiNECTIONS
>2'T tiPS-CIRCUiNFERENTIAL MELDS iNSS 6'6 0/0 0/0 1/0 C5.81 BRANCH PIPE CCNtiECTIONS
>2 NT tiPS-CIRCUttFERENTIAL NELDS HSS 8'/0 0/0 1/0 C5.81 BRANCH?IPE CONNECTIONS
>2'T NPS-CIRCUttFERENTIAL MELDS C5.81 BRANCH PIPE CONNECTIONS
>2'T NPS-CIRCUttFERENTIAL MELDS ttSS 4'F 4'6 71 0/0 0/0 0/0 0/0 I/O 0/0 C5~81 BRANCH PIPE CONNECTIONS
>2'T tiPS-CIRCUNFERENTIAL MELDS BF 4'2 0/0 0/0 0/0 C5 82 BRANCH PIPE CONNECTIOllS
>2'T NPS-LONGITUDINAL MELDS tlSSi BF)N/A 0/0 0/0 , 0/0 DATE;08/2./Bl REVISION: ST.LUCIE NUCL:"AR PLANT UNI INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTIGH Xl SUttttARY TABI.E B AAAI ASHE SFC.XI ITEN tt ITEN OESCRIPTIOM EXANi HETHGD SYSTEM DESCRIPTIOM 4 OF CGitPGNENTS NU?1BER OF RELIEF SCHEDULED/COMPLETED ZONE CONPOHEttTS REQ.IST PER 2ND PER 3RD PER C6,10 PUMPS PUMP CASING TELOS C6.20 VALVES-VALVE BODY HELDS SURFACE ALL H/A SURFACE ALL iN/A 0/0 0/0 0/0 0/0 0/0 0/0 DATE: 08/25/87 REVISION: 1 ST.LUCIE NUCLEAR PLANT UHIT 1 INSERVICE INSPECTION PLAN FOR TME FIRST INTERVAL CLASS 2 SECTION XI
SUMMARY
PAGEOS 12 TABLE B CATEGORY C-H-ALL PRESSURE RETAINING COMPONENTS IH PRESSURE VESSELS ASME SEC.XI ITEM 4 ITEM DESCRIPTION 5 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EXAM METHOD SYSTEM DESCRIPTIOH ZONE COMPONENTS RED.1ST PER 2ND PER 3RD PER C7.10 PRESSURE VESSELS-SYSTEtl VISUAL VT-2 ALL CLASS 2 PER COLOR PRESSURE TEST CDDED P&ID'S>>>>w NOTE)0 OF COMPONENTS:
EXAMINE ALL CLASS 2 COMPONENTS AND SYSTEMS EACH:S/G, RHX, BAT)HDOHST)SCHX C7.20 PRESSURE VESSELS-SYSTEM VISUAL VT-2 ALL CLASS 2 PER CDLOR HYDROSTATIC TEST CODED P&ID'S>>>>a NOTE:I OF COMPOHENTS:
EXAMINE ALL CLASS 2 COMPONENTS AHD SYSTEMS EACH 12 PERIOD~12 INTERVAL, 12/0 12/0 12/0 0/0 0/0'2/0 C7.30 PIPING-SYSTEM PRESSURE TEST VISUAL VT-2 ALL CLASS 2 PER CDLOR CODED P&ID'S>>>>+HOTE:0 OF COMPONEHTS:
EXAttINE ALL CLASS 2 COMPONENTS AND SYSTEMS EACH:CCH)MS)FH, BO, CS, AFN, RC, CVCS, CS)RFH, Sl, SCS C7,40 PIPIHG-SYSTEtl HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 2 PER COLOR CODED P&ID'S>>>>+NOTE:a OF COMPONENTS:
EXAMINE ALL CLASS 2 COMPONENTS AHD SYSTEMS EACH C7.50 PUMPS-SYSTEM PRESSURE TEST VISUAL VT-2 ALL CLASS 2 PER COLOR CODED P&ID'S>>>>+NOTE lO OF COMPONENTS)
EXAMINE ALL CLASS 2 COMPONENTS AND SYSTEMS EACH)BAP)CHP)CSP)LPSI)HPSI C7.60 PUMPS-SYSTEM HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 2 PER COLOR CODED P&ID'S>>>>+NOTE ll OF COMPONENTSl EXAMIHE ALL CLASS 2 COMPONEHTS AHD SYSTEMS EACH 12 PERIOD.12 INTERVAL.12 PERIOD, 12 INTERVAL.12/0 12/0 12/0 0/0 0/0 12/0 12/0 12/0 12/0 0/0 0/0 12/0 C7.70 VALVES-SYSTEM PRESSURE TEST VISUAL VT-2 ALL CLASS 2 PER COLOR CODED P&ID'S>>>>+NOTE lN OF COMPONENTSl EXAMIHE ALL CLASS 2 COMPONENTS AND SYSTEMS EACH PERIOD.1/0 1/0 1/0 C7~80 VALVES-SYSTEM HYDROSTATIC TEST VISUAL VT-2 ALL CLASS 2 PER COLOR CODED P&ID'S>>>>+NOTE l%OF COMPONENTS)
EXAMIHE ALL CLASS 2 CDMPOHEHTS AHD SYSTEMS EACH APART OF PIPING SYSTEM INTERVAL, 0/0 0/0 1/0 0
RPPENO I><C CLRSS 3 ENRMINRTION SUMMRRY TRBLES PAGE: 1 4 OF CONPONENTS NUMBER OF RELIEF SCHEDULED/CO<1PLETED ZONE COt1PONENTS RED.1ST PER 2HD PER 3RD PER EXAM METHOD SYSTE<1 DESCRIPTION DATEl 08/25/87 ST.LJCIE NUCLEAR PI.ANT iJHIT 1 REVISION: 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 3 SECTION XI SUttNARY TABLE C CATEGORY D-A-SYSTENS IN SUPPORT OF REACTOR SHUTOOMN FUttCTION ASttE SEC, XI ITEt1 4 ITEtl DESCRIPTION Dl.101 SYSTEN PRESSURE TEST VI'-2 ALL CLASS 3 BOUNDARY<<<<>NOTE lALL COt1PONENTS TO BE EXAttINED EACH PERIOD I/O 1/0 1/0 Dl.10B SYSTEM HYDROSTATIC TEST aww4w NOTE lALL COttPONENTS TO D1.20 INTEGRAL ATTACHttENT-COttPO<<tENT SUPPORTS AND RESTRAINTS VT-2 ALL CLASS 3 BOUNDARY BE EXAMINED EACH INTERVAL VT-3'FM 113 2 0/0 0/0 1/0 I/O.1/0 0/0 Dl~20 INTEGRAL ATTACHMENT-COHPOttEttT VT-3 SUPPORTS AND RESTRAINTS
.Dl.20 INTEGRAL ATTACHtlENT-COHPONEHT VT-3 SUPPORTS AND RESTRAINTS CONDENSATE CONDENSATE 118 II9 2 I/O 1/0 I/O 0/0-'1/0 1/0 Dl,30 INTEGRAL ATTACHNENT-NECHANICAL VT-3 AND HYDRAULIC SNUBBERS e Dl.40 INTEGRAL ATTACHttENT-SPRING VT-3 TYPE SUPPORTS Dl~50 I ttTEGRAL ATTACHNENT-CONSTAttT VT-3 LOAD TYPE SUPPORTS N/A N/A CONDFttSATE 120 1 0/0 0/0 0/0 0/0 0/0 0/0 0/0 1/0 0/0 DI.60 INTEGRAL ATTACHttENT-SHOCK VT-3 H/A ABSORBERS 0/0 0/0 0/0 D ATE: 08/25/87 ST~LUCIE NUCLEAR PLANT UNIT 1 REVISION: INSERVICE INSPECTIOM PLAN FOR THE FIRST INTERVAL CLASS 3 SECTIOti XI SL'tlNARY TABLE C CATEGORY D-B-SYSTEtlS IN SUPPORT OF EMERGENCY CORE COOLING, CONTAICENT HEAT RENOVAL, ATtlOSPHERE CLEANUP PAGE'.2 ASttE SEC.XI I TEtl 4 ITEN OESCRIPTIOM EXAM"ETHOD SYSTEM DESCRIPT IOti 4 OF CONPOtiENTS tiUNBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED'ST PER 2ND PER 3RD PER 02'0A SYSTEtl PRESSURE TEST VT-2 ALL CLASS 3 BOUNDARY a+au+NOTE lALL COtlPOtiEMTS TO BE EXAtlINED EACH PERIOD.D2.10B SYSTEM HYDROSTATIC TEST Vl'-2 ALL CLASS 3 BOUtiDARY><4+%NOTE lALL COMPONENTS TO,BE EXAtllNED EACH INTERVAL 1/0 I/O 1/0 0/0 0/0 1/0 D3.10A SYSTEM PRESSURE TEST VT-3 D3.10B SYSTEM HYDROSTATIC TEST VT-3 D3.20 INTEGRAL ATTACHMENT-COMPONENT VT-3 SUPPORTS AND RESTRAINTS, D3.30 INTEGRAL ATTACHttENT-NECHANICAL VT-3 AND HYDRAULIC SNUBBERS CC NIA CC 101 110 18 100 OIO 0/0 I/O 6/0 6/0 6/0 0/0 0/0 0/0 1/0 1/0 1/0 D3,30 INTEGRAL ATTACHttENT-tlECHAttICAL VT-3 AtiD HYDRAULIC SNUBBERS D3.40 INTEGRAL ATTACHttENT-SPRING VT-3 TYPE SUPPORTS CC N/A 105 1/0 1/0 1/0 0/0 0/0 0/0 93.50 INTESRAL ATTACHMENT-CONS'TANT VT-3 LOAD TYPE SUPPORTS N/A OIO 0/0 0/0 DATE: 08/2$/S7 ST.LUCIE NUCLEAR PLANT UNIT I REVISION: INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 3 SECTION XI
SUMMARY
TABLE C CATEGORY D-C-SYSTEMS IN SUPPORT OF RESIDUAL HEAT REMOVAL FROM SPENT FUEL STORAGE POOL PASE.'SME SEC.XI ITEit 4 ITEtt DESCRIPTION EXAM METHOD SYSTEM DESCRIPTION 4 OF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED~IST PER 2ND PER 3RD PER D3.BOA SYSTEM PRc;SSURE TEST VT-2 ALL CLASS 3 BOUNDARY+<aim NOTE lALL COiMPONENTS TQ BE EXAMINED EACH PERIOD.D3.10B SYSTEM HYDROSTATIC TEST VT-2 ALL CLASS 3 BOUNDARY~<<<>NOTE lALL COMPONEttTS TO BE EXAMINED EACH INTERVAL 03'0 INTESRAL ATTACHMENT-COMPONENT VT-3 N/A SUPPORTS AND RESTRAINTS I/O I/O 1/0 0/0 0/0 1/0 0/0 0/0 0/0 D3.30 INTEGRAL ATTACHMENT-MECHAttICAL VT-3 AND HYDRAULIC SNUBBERS N/A 0/0 0/0 0/0 D3,40 IttTE6RAL ATTACHMENT-SPRIN6 VT-3 TYPE SUPPORTS'/A 0/0 0/0 0/0 D3.50 INTESRAL ATTACHMENT-CONSTANT VT-3 LOAD TYPE SUPPORTS e D3.60 INTE6RAL ATTACHMENT-SHOCK VT-3 ABSGRBERS 0/0 0/0 0/0 0/0 0/0 0/0 RPPEND I X D CLRSS 1 HRNGER SUI1NRRY TRBLES DATE: 08/i5/82 REVISION:}ST.LUCIE HUCI.EAR PLANT UNIT I INSERVICE IttSPECTION PLAN FOR THE FIRST INTERVAL CLASS I SECTION XI SUHNARY TABL'E D PAGE.'XAtt ttETHOD SYSTEtl DESCRIPTION CATEGORY F-A-PLATE AHD SHELL TYPE SUPPORTS AsttE SEC.XI I TEil 0 ITEN DESCRIPTION 0 OF COtlPONENTS NUNBER OF RELIEF SCHEDULED/COHPLETED ZONE COttPONENTS REQ.lST PER 2ND PER 3RD PER Fl.l0 ttECKANICAL COtSECTIONS TO VT-3 PRESSURE RETAINING COttPONEttTS AND BUILDING STRUCTURE RCS 0/0 0!0 0/0 DATE.'08/25/87 REVISION: ST~LUCIE NUCLEAR PLANT Ut(IT I INSERVICE INSPECTION PLAN FOR THE.IRST INTERVAL CLASS I SECTION XI SUttttARY TABLE D PAGE: 2 e CATFGORY F-B-LINEAR TYPE SUPPORTS ASttE SEC.Xl ITEN tt ITEN DESCRIPTION 0 OF COttPONENTS NUttBER OF RELIEF SCHEDULED/COttPLETED EXAtt METHOD SYSTEtt DESCRIPTIOM ZONE COttPONENTS REQ.1ST PER 2ND PER 3RD PER F2.10 ttECHANICAL CONNECT IOtiS TO VT-3 PRESSURE RETAINING COttPOtiENTS AND BUILDING STRUCTURE 21 12 I/0 I/O I/O F2.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAI tt1 tt6 COttPOMEMTS AMD BUILDING STRUCTURE SI 22 I/0 I/0 I/0 F2.10 ttECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAININ6 COMPONENTS AND BUILDING STRUCTURE Sl 23 5 1/0 0/0 0/0 F2.10 ttECHAMI GAL CONNECTIONS TO VT-3 PRESSURE RETAININ6 COMPONENTS AND BUII.DIN6 STRUCTURE Sl 0/0 I/O 0/0 F2.10 ttECHAMICAL COtttlECT IONG TO VT-3 PRESSURE RETAININ6 COttPOMENTS AND BUII.DING STRUCTURE RCS 0/0 0/0 0/0 F2.10 ttECHANICAL CONNECTIONS TO VT-3 PRESSURE REtAINING CONPONENTS AND BUILDING STRUCTURE RCS 26 12 1/0 I/O 1/0 F2~10 F2.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE MECHANICAL COttttECTIONS TO VT"3 PRESSURE RETAINIM6 COttPONENTS AND BUILDING STRUCTURE RCS RCS 27 28 10 1/0 1/0 1/0 0/0 0/0 1/0 F2,10 F2.10 MECH ANICA)CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDIN6 STRUCTURE NECKAMICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COttPONENTS AMD BUILDING STRUCTURE RCS 1/0 0/0 0/0 0/0 1/0 0/0 e F2.10 ttECKAMICAL CONNECTIONS TO VT-3 CH PRESSURE RETAINING COttPOMENTS AND BUILDING STRUCTURE 0/0 0/0 1/0 OATEN'8/25/87 REVISIOttl 1 ST~LUCIE NUCLEAR PLANT UN!T 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUt!MARY TABLE D PAGE: ASMiE SEC, XI ITEil tt I TEtl DESCRIPTION EXAM METHOD SYSTEM DESCRIPTION 0 Of COMPONENTS ttUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COttPONENTS REQ.1ST PER 2ND PER 3RD PER F2.10 tlECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AiND BUILDING STRUCTURE RCS 1/0 1/0 0/0 F2.10 tlECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS ANi D BUILDING STRUCTURE SI 39 10 1/0 1/0, 1/0 F2.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAIitING COMPONENTS AND BUILDING STRUCTURE SI 40 13 2/0 1/0 1/0 DATE: 08/25/87 REVISION: ST.LUCIE tlUCLEAR PLAtlT UNIT 1 INSERVICE IHSPE".TION PLAN FOR THE FIRST INTERVAL CLASS 1 SECTION XI SUtlMARY TABLE.0 PAGE: EXAM METHOD SYSTEM DESCRIPTIOH CATEGORY F-C-COMPONENT STANDARD SUPPORTS ASME SEC.XI ITEM tt ITEM DESCRIPTION I OF COMPONENTS tlUMBER GF RELIEF SCHEDULED/COtlPLETED ZONE COMPONENTS REQ, 1ST PER 24D PER 3RD PER F3.10 F3,10 F3.10 F3.10 MECHANICAL CGtlNECT IOHS TO VT-3 PRESSURE RETAININB COMPONENTS AND BUILDING STRUCTURE MECHAtlI GAL CONtlECT TONS TO VT PRESSURE RETAINING COMPONENTS AHD BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDIN6 STRUCTURE ilECHANICAL COilHECIIGHS TO VT-3 PRESSURE RETAINING COMPONENTS AHD BUILDIN6 STRUCTURE RCS SI Sl SI 16 21 22 , 3 17 0/0 I/O 0/0 1/0 2/0 1/0 1/0 I/O 1/0 0/0 0/0 I/O F3.10 MECHANICAL CONNECTIONS TO.VT-3 PRESSURE RETAINltlG COMPONENTS AND BUILDING STRUCTURE Sl 24 13 1/0 1/0 1/0 F3.10 MECHANICAL CONHECTIONS TO VT-3 PRESSURE RETAININ6 COMPONENTS AND BUILDING STRUCTURE RCS 0/0 0/0 1/0 F3.10 F3.10 F3.10 F3.10 F3.10 tlECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAININB COMPONENTS AND BUILDING STRUCTURE MECHANICAL CONNECT IGNS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE tlECHAHICAL CONNECTIONS TO VT-3 PRESSURE RETAININB COMPONENTS AND BUILDING STRUCTURE ttECHANICAL COtlNECTIONS IO VT-3 PRESSURE RETAININ6 COMPONENTS AND BUILDIN6 STRUCTURE MECHAHI GAL CONNECTIONS TO VT-3 PRESSURE BETA ININB COMPONEtlTS AND BUILDIHG STRUCTURE RCS RCS RCS RCS CH 26 27 28 29 30 11 0/0 1/0 I/O 1/0 0/0 1/0 0/0 1/0 0/0 0/0 0/0 1/0 1/0 I/O 1/0 DATE: 08/25/87 REV IS ION: 1 ST, LUCIE NUCLEAR PLANT UNIT 1 iNSERVICE INSPECTION Pt.AN FL'R THE FIRST INTERVAL C~ASS I SECTION XI
SUMMARY
TABLE Q PAGE: 5 ASME SEC.XI ITEtt 4 ITct1 DESCRIPTION EXAM METHOD SYSTEM DESCRIPI'ION 0 GF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COMPONENTS RED.IST PER 2ND PER 3RD PER F3~10 ttECHANICAL CONNECTIONS TO VT PRESSURE RETAININS COMPONENTS AND BUILDING STRUCTURE 0/0 I/O 1/0 F3 10 MECHANICAL CONNECTIONS TD VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAININS COMPONENTS AND BUILDINS S'TRUCTURE CH RCS 32 26 37 14 2/0 2/0 2/0 I/O I/O 1/0 F3'0 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAININS COMPONENTS AND BUILDING STRUCTURE RCS 1/0 I/O 2/0 F3, 10 ttECHANICAL CONNECTIONS TO VT-3.Sl PRESSURE RETAININS COMPONENTS AND BUILDING STRUCTURE 3V 17 I/O 2/0 1/0 F3.10 McCHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING CQMPQttENTS AND BUILDING STRUCTURE Sl 40 21 2/0 2/0 2/0 RPPEND IN-E CLRSS 2 HRNGER SUl1NRRY TRBLES DATEl 08/25/87 REV I 8 IOi'4: 1 ST LUCIE NUCLEAR PLAilT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTION XI SUtlNARY TABLE E PASE: 1 EXAN tlETHOD.SYSTEN DESCRIPTION CATEGORY F-A-PLATE AND SHELL TYPE SUPPORTS ASNE i SEC.XI ITEtl tt I TEtl DESCRIPTION 0 OF CONPONENTS NUNBER OF RELIEF SCHEDULED/COtlPLETED IONE COtlPGNENTS REQ.1S'I PER 2ND PER~RD PER F l.10 NECHANICAL CDNttECT I DMS TO VT-5 PRESSURE RETAINING CONPONENTS AND BUILDING STRUCTURE ALL NDNE 0 0/0 0/0 0/0 DATE: 0B/2'/B7 REVISION: ST~LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 2 SECTIOH Xl
SUMMARY
TABLE E PAGEOS 2 ASME SEC.XI ITEM 0 ITEM DESCRIPTION 4 QF COMPONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED EXAM METHOD SYSTEM DESCRIPTION ZONe COMPONENTS REQ.1ST PER ittD PER 3RD PER F2.10 F2~10 F2.10 tlECKAHICAL CONttECT IONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDIttG STRUCTURE MECHANICAL CONtlECTIOttS
'TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE SI HPSI HPSI 61 62 23 0/0 I/O 1/0 I/O 0/0 1/0 2/0 1/0 2/0 F2.10 MECHANICAL CONNECTIOHS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE ASS 1/0 1/0 I/O F2 10 F2.10 F2.10 F2.10 ttECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINIHG CQttPOHENTS AND BUILDIHG STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDIHG STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPQttENTS AND BUILDING STRUCTURE MSS MSS MSS 65 2 66 67 0/0 1/0 0/0 0/0 0/0 1/0 0/0 0/0 1/0 1/0 0/0 0/0 F2.10 F2.10 F2.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONEHTS AND BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AHD BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT PRESSURE RETAINING COMPONENTS AttD BUILDING STRUCTiJRE iMFH MFH 71 72 0/0 1/0 0/0 0/0 0/0 1/0 1/0'/0 0/0 DATE: 08/25/87 REVISION: ST.LUCIE NUCLEAR PLANT UNI'T 1 INSERVICE INSPECTION PLAN FOR tHE FIRST INTERVAL CLASS 2 SECTION XI SUttttARY TABLE E PAGE: CATEGORY F-B-LINEAR TYPE SUPPORTS ASNE SEC.Xl ITEN tt ITEN DESCRIPTION EXAN ttETHOD SYSTEN DESCRIPTION 0 OF CONPONENTS NUttBER OF RELIEF SCHEDULED/COHPLETED ZONE COttPONENTS REQ, 1ST PER 2ttD PER 3RD PER F2.10 ttECHANIC,"L COMt<ECT IOttS TO VT-3 PRESSURE RETAINING CONPONENTS AND BUILDING STRUCTURE NFM Bj 0/0 1/0 0/0 PACir t ST.LUCIE NUCLEAR PLANT UNIT!INSERVIC;ItiSPECTIQti PLAN FOR THE FIRST ItiTERVAL CLASS 2 SECTION Xl SUtINARY TABLE E DATE: 08/25/87 REVISIONl I tt OF COtlPQtiENTS NUtlBER OF RELIEF SCHEDULED/COtlPLETED IGNE CONPONENTS REQ 1ST PER 2MD PER 3RD PER EXAN NETHOD SYSTEN DESCRIPTIOM r CATFBGRY F-C-COtlPQNENI'TANDARD SUPPORTS ASNE SEC.XI ITEN tt ITEN DESCRIPTIOM F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAIN INB CQNPONENTS AND BUILDING STRUCTURE Sl 44 2/0 3/0 3/0 F3.10 NECHANICAL CONNEC'IIONS TO VT-3 PRESSURE RETAINING CGNPONENTS AND BUILDING STRUCTURE HPSI 61 11 1/0 I/0 1/0 F3.10 NECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING CONPONENTS AND BUILDING STRUCTURE HPSI 62 10 1/0 I/O I/O F3.10 tlECHANICAL CONNECT IOtiS TO VT-3 PRESSURE RETAIMINB CONPONENTS AND BUILDING STRUCTURE iNSS 0/0 I/O 1/0 F3.10?IECHANICAL CONNECTIONS TO'T-3 PRESSURE RETAINING CONPONENTS AND BUILDltiG STRUCTURE tlSS 64 0/0 I/O I/O F3.10 NECHAMICAL CGtiNECTIONS I'0 VT-3 PRESSURE RETAINING CGNPONENTS AND BUILDING STRUCTURE NSS 1/0 0/0 0/0 F3.10 ilECHANICAL CONNECT IOtiS TO VT-3 PRESSURE RETAININ6 COtlPONENTS AMD BUILDING STRUCTURE NSS 66 0/0 1/0 0/0 F3.10 NECHANICAL CGNtiECT IONS TO VT-3 PRESSURE RETAINING CQiiPONENTS AND BUILDING STRUCTURE NFli 67 0/0 0/0 I/O F3.10 F3,10 ilECHAMICAL COI'itiECTIONS TO VT-3" PRESSURE RETAININB CONPONENTS AND BUILDING STRUCTURE NECHANICAL COtiNECTIOMS TO VT-3 PRESSURE RETAININ6 COtlPONENTS AMD BUILDltiG STRUCTURE ilFM HPSI 68}/0 1/0 0/0 0/0 0/0 1/0 F3.10 NECHANICAL CGNtiECTIONS TO VT-3 PRESSURE RETAItilNB CGNPQNEtiTS AND BUILDING STRUCTURE HPSI 84 0/0 1/0 0/0 DATE.'08/25/87 REVISION: ST.LUCIE NUCLEAR PLANT UNIT 1 IttSERVICE INSPECTIOtt PLAN FOR THE FIRST INTERVAL CLASS 2 SECTION XI SUttttARY TABLE E PASE: , 5 CATEGORY F-C-CONPONENT STANDARD SUPPORTS ASi'tE SEC.Xl ITEN tt ITEN DESCRIPTION 4 OF CONPONENTS NUNBER OF RELIFF SCHEDULED/CONPLETED EXAN NETHGD SYSTEtt DESCRIPTION ZONE COttPONENTS RED.IST PER 2ND PER 3RD PER F3.10"ECHANICAL CGttNECT IOttS TO VT-3 PRESSltRE RETAININS COttPONFNTS AND BUILDING STRUCTURE F3.10 ttECHANICAL CGttNiCTIGttS TO VT-3 PRESSURE RETAINING CGNPGNENTS AND BUILDING STRUCTURE HPSI HPSI 85 1/0 0/0 0/0 0/0 0/0 1/0 F3, 10 ttECHAMI GAL CGNttECT IONS TO VT-3 PRESSURE RETAINI tt6 CONPONENTS AND BUILDlttB STRUCTURE HPSI 87 27 2/0 3/0 2/0 RPPENDEN F CLRSS 3 HRNGER SUNNRRY TRBLES DATE: 08(25/87 REVISION: ST~LUCIE NUCLEAR PLANT UNiT 1 IMSERVICE IttSPECI'IOM PLAN FOR THE FIRST IMI'ERVAI.
CI.ASS 3 SECTiON XI SUttNARY TABLE F.PAGE'CATEGORY F-A-PLATE AND SHELL TYPE SUPPORTS ASNE SEC.XI ITEtt 0 ITEN DESCRIPTION EXAM METHOD SYSTEtt DESCRIPTION 0 OF COMPONENTS NUttBER OF RELIEF SCHEDULED/CottPLETED ZONE COMPONENTS REQ.1ST PER 2ND PER 3RD PER F I.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINIMG COMPONENTS AND BUII.DING STRUCTURE CC 102 0/0 0/0 0/0 Fl.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COttPONENTS AND BUILDING STRUCTURE 110 3 1/0 1/0 1/0 DATE: 08/25/87 REVISION: 1 ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 3 SECTION XI SUttMARY TABLE F PAGEOS 2 ASt!E SEC.XI ITEN tt ITEtt DESCRIPTICM EXAM ttETHOD SYSTEM DESCRIPTION I OF COt!PONENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE COt!POMENTS REQ, 1ST PER 2MD PER 3RD PER F2.10 ttECHANICAL CONNECTIONS TD VT-3 PRFSSURE SETA INltiG COt!PONEtiTS iiMD BUILDING STRUCTURE CC 100 9 1/0 1/0 0/0 F2,10 CHAMICAL COMtiECT IOMS'IO VT PRESSURE RETAINING CDttPOHENTS AtiD BUILD ItiG STRUCTURE CC 101 12 I/O 1/0 1/0 F2.10 I!ECHANICAL COtiNECTIONS TO VT-3 PRESSURE RETAIMIN6 COttPONENTS AND BUILDING STRUCTURE CC 102 24 2/0 2/0 2/0 F2 10 iNECHANICAL COiiNECTIONS TO VT PRESSURE RETAININS COMPONENTS AND BUILDING STRUCTURE CC 103 14 I/O 1/0 I/O F2.10 t!ECHANICAL CONNECTIONS TO VT"3 I PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE F2.10 ttECHANICRL CONNECT IONG TO VT-3 PRESSURE RETAINING COt!POMENTS AND BUILDING STRUCTURE F2~1Q t!ECHANICAL COtiMECTIONS TO VT-3 PRESSURE RETAIMIMG COHPOMENTS AMD BUILDIN6 STRUCTURE F2.10'!ECHAMICAL CONtiECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AtiD BUlLDINS STRUCTURE CC CC 104 22 105 24 IQii 12 107 Ih 1/0 2/0 2/0 2/0 2/0 2/0 1/0 1/0 I/O 2/0 I/O I/O F2.10 NECHAiMICAL COMtiECTIOtiS TO VT-3 PRESSURE RE'IAIMING COMPONENTS AND BUII.DING STRUCTURE F2.10 ttECHAMICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE CiM CM 108 19 109 18 1/0 2/0 2/0 1/0 2/0 1/0 F2.1Q ttECHAMICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COttPONENTS AND BUILDIN6 STRUCTURE CW 110 16 5/0 5/0 5/0 DATE: 08/25/B7 REV IS I QM: I ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FOR THE FIRST INTERVAL CLASS 3 SECTION XI SUNttARY'fABLE F?AGE: t CATEGORY F-B-LINEAR TYPE SUPPORTS ASNE SEC.XI ITEil 0 ITEN DESCRIPT ION EXAtt NETHOD SYSTEM DESCRIPTIQM 0 OF CQNPOitENTS NUMBER OF RELIEF SCHEDULED/COMPLETED ZONE CQt!PONENTS RED, IST PER 2ND PER 3RD PER;2.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING CQttPQNEt<TS AND BUILDING STRUCTURE F2'0 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE F2.10 ttECHANICAL CONhECTIOtlS TO VT-3 PRESSURE RETAINING CQiNPONEitTS AND BUILDI ttG STRUCTURE SFC 112 6 113 7 0/0 1/0 0/0 0/0 0/0 I/O 1/0 1/0 0/0 F2.10 ttECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COttPONENTS AND BUILDING STRUCTURE 118 7 0/0 1/0 1/0 F2 10 ttECHANICAL CONNECTIONS TO VT-3~~PRESSURE RETAItaiNG COMPONENTS AND BUILDING STRUCTURE 120 6 0/0 I/O 0/0 DATEl OG/25/87 REVISION'ST.LUCIE NUCLEAR PLANT UNIT I INSERVICE INSPECTION PLAH FOR THE FIRST ItlTERVAL CLASS 3 SECTION XI SUtlMARY TABLE F PAGE: 4 CATE6QRY F-C-COMPONENT STANDARD SUPPORTS ASilE SFC, Xl ITEtl tt ITEM DESCRIPTION EXAM METHOD SYSTEM DESCRIPT IGN 4 OF COMPONENTS NUtlBER OF RELIEF SCHEDULED/CQiMPLETED ZONE CGtlPONEHTS RED IST PER 2HD PER 3RD PER F3.10 tlECHAHICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONEtlTS AND BUILDING STRUCTURE CC 100 13 1/0 1/0 1/0 F3.10 F3.10 F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPQtlENTS AND BUILDIH6 STRUCTURE tlECHANICAL CONttECT IGNS TO VT-3 PRESSURE RETAININ6 COMPONENTS AND BUILDING STRUCTURE MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING CGilPOHENTS AND BUILDING STRUCTURE CC CC CC 101 17'102 20 103 15 I/O 2/0 1/0 2/0 1/0 2/0 1/0 2/0 1/0 F3 10 ilECHANECAL CONNECTIONS TO'T-3 PRESSURE REI'AENING COMPONENTS AND BUILDIHG STRUCTURE CC 104 8 0/0 1/0 1/0 F3~10 MECHANICAL CONNECTIONS TQ VT-3 PRESSURE RETAININ6 COMPONENTS AND BUILDIN6 STRUCTURE CC 105 21 2/0 1/0 2/0 , F3,10 MECHANICAL CONNECTIONS TO VT"3 PRESSURE RETAINING COMPONENTS AHD BUILDIN6 S'ERUCTURE CC 106 5 0/0 1/0 0/0 F3.10 MiECHANICAL CONNECTIONS TO VT 3PRESSURE RETAIMIHG COMPONENTS AttD BUILDING STRUCTURE 107 6 0/0'/0 1/0 F3.10 MECHAit ICAL CONNECT IOHS TO VT-3 PRESSURE RETAINING COMPOHENTS AND BUILDING STRUCTURE 108 23 2/0 2/0 2/0 F3.10 tlECHANECAL CONNECTIONS TO V'1-3 PRESSURE RETAINING COMPONENTS AND BUILDIN6 STRUCTURE 109 13 1/0 2/0 1/0F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COtlPONEHTS AND BUILDIH6 STRUCTURE 110 2 0/0 0/0 0/0 DATE!08/25/87 REVISION: ST.LUCIE NUCLEAR PLANT UNIT 1 INSERVICE INSPECTION PLAN FQR THE FIRST INTERVAL CLASS 3 SECTIGN XI SUttMARY TABLE F PASE: CATECGRY F-C-COMPONENT STANDARD SUPPORTS ASME SEC.XI ITEM 0 ITEM DESCRIPTION EXAM METHOD SYSTEM DESCRIPTION 0 GF COMPONENTS NUMBER OF RELIEF SCHEQULED/COMPLETED ZONE COMPONENTS REQ.1ST PER 2ND PER 3RD PER F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING COMPONENTS AND BUILDING STRUCTURE SFC 111 6 0/0 0/0 1/0 F3.10 tlECHANICAL CONNECTIONS TO VT-3 PRESSURE RE'TAINli?S COMPONENTS AND BUILDINS STRUCTURE AFN 112 22 2/0 2/0 2/0 F3.10 ttECHANICAL CO?1NECTIONS TO VT-3 PRESSURE RETAINlttB COMPONENTS AND BUILDING STRUCTURE F3~10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAINING CQMPONFNTS AND BUILD INS STRUCTURE AFN AFtt 113 15 114 14 1/0 1/0 2/0 1/0 1/0 2/0 F3.10 MECHANICAL CONNECTiONS TO VT-3 PRESSURE RETAININB COMPONENTS AND BUILDING STRL'CTURE F3.10 iMECHANICAL CONNECTIONS TQ VT-3 PRESSURE RETAINING COMPONENTS AND BUILDI~?IS STRUCTURE 115 10'116 5 I/O 1/0 0/0 0/0 0/0 1/0 F3.10 i ECHANICAL CQ?INECTIONS TO VT-3 PRESSURE RETAIN I?(G COiiPONENTS AND BUILDING STRUCTURE AFN 111 6 1/0 0/0 1/0 F3.10 MECHANICAL CONNECTIONS TO VT-3 PRESSURE RETAININB COMPONENTS AND BUILDING STRUCTURE 118 16 1/0 1/0 2/0 F3.10 MECHANICAL CONNECTIONS TO VT"3 PRESSURE RE'PAINING COMPONENTS AND BUILDINS STRUCTURE II9 16 1/0 2/0 , 1/0 RPPENOI X G RSNE COOE CRSES
APPENDIX G ASME CODE CASES The following is a list of ASNE Code Cases which have been evaluated by FP&L as applicable to the St.Lucie Second Ten Year Inservice Inspection Program and are therefore incorporated into the program.CODE CASE N-307-1 N-335-1 N-408 N-416 N-419 N-424 N-426 TITLE Revised Ultrasonic Examination Volume for Class 1 Bolting, Examination Category B-G-l Rules for Ultrasonic Examination of Similar and Dissimilar Metal Welds Alternate Rules for Examination of Class 2 Piping Alternative Rules for Hydrostatic Testing of Repair or Replacement of Class 2 Piping Extent of VT-1 Examinations Category B-G-1 of Table I%3-2500-1 Qualif ication of Visual Examination Personnel Extent of VT-1 Examinations, Category B-6-2 of Table IWB-2500-1 36 CODE BOUNDRRY DRR WINGS 8.0 Code Boundary Drawings In this section are all the Code boundary drawings for the Class 1,, 2, and 3 systems.Code Class is designated on each drawing using a letters and and colors.Class 1 systems are color coded RED.and denoted with the letter A boxed.Class 2 systems are color coded BLUE and denoted with the letter B boxed.Class 3 systems are color coded GREEN and the letter C boxed is used.CODE BOUNDARY DRAWING LIST Dxawing Number Rev.8770-E-80303 PSL1-CB-007-1 8770-E-80303 PSL1-CB-007-2 8770-E-80303 PSL1-CB-007-3 8770-E-80306 PSL1-CB-009-1 8770-E-80307 PSL1-CB-001-1 PSL1-CB-001-2 PSL1-CB-001-3 8770-E-80308 PSL1-CB-002-1 PSL1-CB-002-2 8770-E-80309 PSL1-CB-003-1 PSL1-CB"003-2 PSL1-CB-003-3 8870-E-80310 PSL1-CB-004-1 PSL1-CB-004-2 8770-E-80311 PSL1-CB-005-1 PSL1-CB-005-2 8770-E-80312 PSL1-CB-006-1 PSL1-CB-006-2 Sheet No.1 of 5 2 of 5 3 of 5 5 of 5 1 of 2 1 of 3 Thrll 3 of 3 1 of 3 Thru 3 of 3 1 of 5 Thru 5 of 5 1 of 4 Thru 3 of 4 1 of 2 Thru 2 of 2 1 of 3 Thru 2 of 3 Title Ultimate Heat Sink Component Cooling Water System Intake Cooling Water System Miscellaneous Systems Main Steam, Feedwater, Blowdown, Aux.Feedwater and Condensate Storage Reactor Coolant System Chemical&, Volume Control and Sampling System Safety Injection and Shutdown Cooling System Containment Spray, Iodine Removal and Refueling Water Systems Fuel Pool Cooling and Waste Gas Systems 37
FLORIDR POMER fe LIGHT COMPANY ST.LUCI E NUCLERR PLRNT UNIT NO.1 SUNNRRY OF INCOMPLETE EXRNINRT IONS RR Na.i PROGRRtl I DENT IF I CRT ION DESCR I PT ION ITEN NO.NUMBER I TEf1 NO.CRTEGQRY RSNE CODE DESCR I PT I ON OF REL LIl1ITRTIQN PEg FIG.NO.REt1RRKS ZONE 1 SHELI WEl DS s-2es CIRC.WELDS tlIDDLE SHELL TO LOMER SHELL 81.18 Bi.ii 8-R N/R SURVEILLANCE SPECI/IEN 8-15.SX 95-8BX'IS-22eeSX BBT-1'fosx 68-29.1?X?BRL-2 Iix 78RLT-~21X 81-L il1 Bi-SKT COMBINED COVERAGE BX 8-288R 8-283B 8-283C LOMER SHELL VERTICRL MELDS Bio 12 B-R RHTI-ROTATION LUGS 8-38.56X%5-5.8X 68-28sSSX 81-PSLR COMBINED COVERRGE BX HERD MELDS18-288 CIRC MELDS LOMER SHELL TO LOMER HERD MELD 81.28 Bi e 21 N/R CORE SUPPORT LUGS 4 ANTI-ROTATIOH LUGS 8-36 61X'IS-2 95X I IS 2?e 71X 68 8?8X 68-28+96X Bi-LIB N/A COMBINED COVERAGE BX 28%-82 LOMER HERD DOLLRR PLATE MELD'i~21 B-A HERR SURFACE IHTERFRCE NOISE e-se.ex se-is.ssx i ei-LIB 881-PSL COMBINED ROVERAGE BX 289-88A 28'I-88B 28'I-88C 28m-esn 28'-83E 28'-88F TI APER7ggg CAgg 7-288 Also Available Pn A erture C~LOMER HEAD f1ERIDIONRL MELDS UPPER SHELL TO FLANGE MELD 81.22 B 1.38 B"R B-A CORE SUPPORT LUGS FLOM SKIRT 8-79 82X 95-68a82X 68-62 2%X 95T-S?18X 68T-'fs SSX HERR SURFACE INTERFACE NOISE NQ TRRHSVERSE SCRN DUE TO CONFIGURATION 8 SBe 88X'%5T See 1 1 X 95-85 BX 68T-SS.llx 68-1~82X 81-LIN COMBINED COVERRQE BX 81-SKT COMBINED COVERAGE BX Svoo oo o27 2-0(
NATIHG SURFACE RPV SUPPORT LVQ O ROO TUSE SUPPORT SANPLIHG TUBES 8-RN TUBE SUPPORT CORK BARREL AHTI ROTATIOH LVG CORE BARREL SUPPORT LUG I Ia I II II II~i R8 (1:: rgg~~mac Ugg.CAHD Al80 Aq'a))aM~0'" Card REFERKHCE DRAM IHGS REV!PRESSURE 4 TKNPERATURE STATS I~NATERIAL SPECS SIZE SCH TYPE RELIEF REQUEST HO N%OR CODES AHD PROGRANS CROUP ST+LVCIK POMKR PLAHT DESIGH PSIG!OPKRATIHG PSIC!HYDROSTATIC PSIG!TEtlPC F>!TKtlPCF>!TKtlPCF)!UT CRLIBRATIOH BLOCK!TITLE!ST+LUCIK REACTOR PRK88VRE VE88KL GEHERAL ARRAHGENEHT DATE!S/R%/2OHE!O REVe APPROVED BY!DRAQIHQ~E.L.ANDERSOH HUNBER!OOi-PSLRR 8~ogogomt2 Qk
/,I'0,I MECHRNIZED ULTRASONIC EXAMINATION LIMITATIONS 1-283B 1-283C 1-283A 8-283 2-283R 2-283B 2-283C SAMPLING TUBES m CO tQOl 3-283B n CO t9 I t9 CU TYPICAL CORE BRRREL SUPPORT LUG 18-283 TI LIMITATIONS r~ERT~RE CAJUN)TYP.FLOW SKIRT SUPPORT LUGS 289-82 Also Available On Aperture Card REFERENCE DRRWINGS'EV PRESSURE L TEMPERATURE STATS MATERIAL SPECS SIZE SCH TYPE CODES AND PROGRRMS GROUP ST LUCIE NUCLERR PLANT DESIGN PSIG'PERATING PSIG HYDROSTRTIC PSIG'EMP(F): TEMP(F): TEMP(F>: UT CRLIBRRTION BLOCK'ITLE RPV COMPOSITE OF RLL LIMITATIONS RELIEF REQUEST NO 1 DRTE: 7/26/87 ZONE: 81 REV.RPPROVED BY: DRAWING 8 E.L.RNDERSON NUMBER: 881-LIM svoeoQos>s
-63
.t l I MECHANIZED ULTRRSONIC EXRMINRTION LIMITATIONS CHRRPY TUBES CHRRPY TUBES CIRC WELD 8-888 TYP VOLUME NOT COVERED-TRANSVERSE AREA OF CHRRPY TUBES FIG.NOe 8 CIRC WELD 9-288 RRER NOT COVERED RT CHRRPY TUBES FIG e NO.APjt,g'Ppgp can WELD 8-288 RRER NOT COVERED FIGe NO~5 TYPICAL VERTICAL 4 CIRCUMFERENTIAL WELD 8 DEGREE GRTE LIMITATIONS FIGe NOe S CIRC WELD 7-888 NO%5 5 68 ON FLRNGE 95 4 88 LIMITED ON OUTLET NOZZLES ONLY FIG.NO 7 A1so Avai1able Pn Aperture Cara Q'f5 h 88 DEGREE TRANSVERSE Q'f5 0 68 DEGREE LIMITATIONS g 88 DEGREE LIMITATIONS g 95 DEGREE LIMITATIONS 78 DEGREE REFRACTED LONGITUDINRL CW 0 CCW Q 8 DEGREE LIMITRTIONS REFERENCE DRRMINGS: REV: PRESSURE 5 TEMPERATURE STATS MATERIAL SPECS SIZE SCH TYPE CODES RND PROGRflMS GROUP ST LUCIE NUCLERR PLflNT DESIGN PSIG OPERATING PSIG: HYDROSTATIC PSIG TEl1P(F)TEMP(F)TEMP(F)UT CRLIBRRTION BLOCK: ULTRRSONIC SCRN LIMITRTIONS RELIEF REQUEST NO~1 DATE: 7/RS/87 ZONE: 81 REV.APPROVED BY DRRMING 8 Ee Le ANDERSON NUMBER 881 SKT SVOQ QQOSVS-Oq P~~1 aj FLORIDA POWER 4 LIGHT CONPRNY ST.LUCIE NUCLEAR PLRNT UNIT NO.1 SUMMRRY OF INCOMPLETE E><RM I NRT I ONS PROGRRM I DENT I F I CRT ION ITEM NO.NUMBER DESCRIPTION ITEM NQ.CRTEGQRY FiSME CODE DESCR I PT I,,ON OF LIMITRTION REL REQ FIG.NO.REMARKS ZONE 2 28S-82 CLOSURE HER 81.98 TO FLRNGE B-R ONE SIDE EORM DUE TO CONFIGURRTION 288-83R 288-838 28S-83C 288-83D 28S-83E 288-83F MERIDIONRI 81.22 WELD NTERSECTING HERD TO FLRNGE B-R TE APERYQgg CARD Also Available P~Aperture Ca+~INSULRTION RING LIMITS 15-1/2" OF WELD TO BE E><RM I NED-CH 1 l 4~
8 DEG./88 DEG 95 DEG.CRD PENETRATION I NSTRUl1ENTRTI ON NOZZLE B,'IFTING LUG CODE REQUIRED VOLUHE LENGTH*598" T I 7fl8 NOMINAL LItlITRTION'NE SIDE EXRtl FROH HERD SIDE DUE TO CONFIGURATION OF FLANGE TI APERTURE CARD Also Available On Aperture Card REFERENCE DRAWINGS REV~PRESSURE 8 TEMPERATURE STRTS tfRTERIAL SPECS SIZE SCH TYPE CODES RND PROGRRttS GROUP'T LUCIE liUCLERR PLRNT DESIGN PSIG OPERATING PSIG HYDROSTATIC PSIG TEMP(F)o TEMP(F): TEttP(F)UT CRLIBRRTION BLOCK'lgV.
flPPflOIIEO BY: E.L ANDERSON DRAWING NunBER: 88~CH 5'g09090SV 8-Qg TITLE RPV CLOSURE HERD EXRtt RELIEF REQUEST NOfl P.DATE 8/5/87 ZONE 82 J I 1 E I HEAD TO DONE MELD 8 DEGREE 89-88E OO0 0 289-88F INSULATION RING NO EXAll i5-i/2 OF MELD EXAMINED 278 DEG.28S-88D 0 0 0 0 8S-8SA 88 DEGREE 288<<88B HEAD TO FLANGE MELD STUD HOLE 000 0 88"8SC TI APERTURE CAIU)i88 DEGREES~0 Pyailable On Aperture Card INSULAT IO RING APPROX.8.5 NO EXAM REFERENCE DRAM INGS'EV~PRESSURE 4 TEMPERATURE STATS MATERIAL SPECS SIZE SCH TYPE CODES AND'ROGRAMS GROUP ST~LUCIE';NUCLEAR PLANT UNIT i DESIGN PSIG'PERATING PSIG HYDROSTATIC PSIG'EMP(F)'EllP(F): TEMP(F)'T CALIBRATION BLOCK: RPV CLOSURE HEAD LIMITATIONS RELIEF REQUEST NOe 2 DATE'/'P/87 ZONE'2 REV APPROVED BY DRAMING 8 Ea Le ANDERSON NU>BER>88i CH i Sf09090>>B
-0 f 1 t I t J LitlITATIOHS;
'f'>>OF SCAN PATH OBSTRUCTED DUE TO HOT LEG NOZZLE LOCATEO f AT THE 188 DEGREES (22'ATUtl 19 FROtl'WELD EDGE 188 OEG~HOT LEG DATUM 0 tlANWAY 98 DEG.~88" og 5" OBSTRUCTED LItlITATIONS:
tlANWAYS 1'f>>FROtl CENTER LINE OF WELD FOR 38" AT 0 h 98 DEG.<'f)I LINES LOCATED CW AT 31"i'%9 i 39'ND'f8'Also available On aperture Card REFERENCE DRAWINGS: REV PRESSURE h TEtlPERATURE STATS tlATERIAL SPECS SIZE SCH TYPE CODES AHD PROGRAtlS GROUP ST.LUCIE NUCLEAR PLANT UNIT 1 DESIGN PSIG: OPERATING PSIG HYDROSTATIC PSIG TEMP<F)TEtlP(F): TEtlP(F): UT CALIBRATION BLOCK: TITLE STEAtl GENERATOR L I tlI TAT I OHS RELIEF REQUEST NO~3 DATE: 8/?/87 ZONE: 3 REV.APPROVEO BY: DRAWING 8 E.L.ANDERSON HUtlBER: 881-SG gg09090SVS
-0 g r~~i HOT LEG: STAY BASE TO PRIMARY HERD IN WAY OF SCRN 18" FROM WELD CENTER LINE FOR 26" 18 HOT LEG STAY BASE COLD LEGS BOTH 15 AREAS ON UNDER SIDE OF COLD LEGS COVER FROM 8'O 13'RTUM 0 MRNWRY 88 DEG.~38 (If~MRNWRY oQo I STRY BRSE COLD LEG COLD LEG T'I~ERTPgg CARD 15 STAY BASE t C 1 5K so Available pu Aperture Carp REFERENCE DRAWINGS: REV PRESSURE h TEMPERATURE STRTS MATERIRL SPECS SIZE SCH TYPE CODES RND PROGRAMS GROUP ST.LUCIE NUCLERR PLANT UNIT 1 DESIGN PSIG: OPERATING PSIG0 HYDROSTATIC PSIG: TEMP<F): TEMP<F): TEMP<F)UT CALIBRATION BLOCK: TITLE: STEAM GENERATOR LIMITATIONS RELIEF REQUEST NO.3 DATE: 8/?/8?ZONE: 3 4 REV.RPPROVED BY: DRAWING 8 E.L.ANDERSON NUMBER 881-SG-1 S.V 09 0 9 0 2 V S-()g 4~'
8 DEG', OUTLET NOLtZLE~//68 DEG/~-OUTLET NOZZLE.282 DEG 98 DEG l/j>)I)<<NNRT~l~Jt l r///278 DEG REFERENCE DRAWINGS REV: 196 DEG PRESSURE 4 TEtfPERATURE STATS 188 DEG tfATERIAL SPECS SIZE SCH TYPE 218 DEG.INLET NOZZLE A1so Availaue 0~Aperture Car RELIEF!REQUEST NOR 9 CODES AND PROGRAMS GROUP ST.LUCIE NUCLEAR PLANT DESIGN PSIG: OPERATING PSIG HYDROSTATIC PSIG: TEMP(F)TEMP(F)'EMP(F)UT CALIBRATION BLOCK: TITLE: STERN GENERATOR PRIMARY HEAD OUTLINE, AND MELD LOCATION DATE: 8/12/87 ZONE:9 a%REV APPROVED BY: DRAWING 8 E L ANDERSON NUtiBER: 881-SG-2 gvoo 090@<>-t(
0 I FLORIDA POWER 4 LIGHT COMPANY ST.LUC I E NUCLEAR PLRNT UNIT NO.1 SUMMRRY OF INCOMPLETE EXRMINRTIONS PROGRRM ITEM NO.IDENTIFICRTION NUMBER DESCRIPTION CRTEGORY ITEM NO.RSME CODE DESCRIPTI'ON OF LIMITRTION REL REQ FIG.NO.REI1RRKS 285-81R 285-81B 285-89R 285-89B OUTLET NOZ.TO SHELL WELD INLET NOZ.TO SHELL WELD B3.88 B3.188 B3.98 B3.188 B-D B-D TI APER YURT CARD Also Available On Apcrfure Card 8-88.8/'f5-'fB.1/88-28.3/'t5T-72.8/
68T-72.8/15-1.5/95-1.5/8-28.8/'t5-28.8/88-1.8/'f5T-8/S8T-8/FROM BORE, 15-2.2/'f5-1.6/881 PSL NOZ 881 PSI NQZ SV09 09 027 8-P RELIEF REQUEST NO OUTLET NOZZLE INLET NOZZLE'f5 T I 88 T COMPUTER SCAN 95 FROM BORE (GATE)0 GRTE COMPUTER SCANS NO 0 COVERRGE IN THIS AREA ALSO 95 FROM WALL 8 GATE-COMPUTER SCRNS%5 4 15 FROM NOZZLE TI'APERTUBE CAm URFRCE WAVE EXAMINATION OUTLET NOZZLE LIMITRTIONS URFRCE WRVE EXAMINATION INLET NOZZLE LIMITATIONS Also AvailabIe Oa Aperture Card REFERENCE DRAWINGS: REV PRESSURE L TEMPERRTURE STATS MATERIAL SPECS SIZE SCH TYPE CODE RND PROGRRMS GROUP ST LUCIE POWER PLANT DESIGN PSIG: OPERATING PSIG HYDROSTATIC PSIG TEMP(F>'EMP(F>i TEMP(F): UT CRLIBRRTION BLOCK: RPV INLET 4 OUTLET NOZZLE LIMITATIONS DATE 7/38/87 ZONE: eX REV.RPPROUED BY: DRAWING 8 E L.ANDERSON NUMBER:88i-PSLNOZ-A s'ius 090SVS-/g 1 I4 V'~'I 188 NOTE: SCAN PRTH OF EACH NOZZLE IS SHOWN BY-DOTTED LINES (SCAN PATH i 18 FROW CENTER LINE FOR 8 h 68 DEGREE (SCAN PRTH=8" FROM MELD CENTER LINE FOR'f5 DEGREE)LUG X NRNWAY 0 0 0 0/v.s., sv-s l/73//%98/v/its-)L SV-B l 7/1/~l~/g 8 1/'f~!sv-c 0 0 278 18 3/'f r LUG TI APERYUHE CAII'0 440 Available On Aqgz-ture Card REFERENCE DRAWINGS: REV'RESSURE 5 TE!1PERRTURE STATS MATERIAL SPECS SIZE SCH TYPE CODES RND PROGRAMS GROUP ST.LUCIE NUCLEAR PLANT UNIT 1 DESIGN PSIG: OPERATING PSIG: HYDROSTATIC PSIG: TEMP(F): TEMP(F): TEMP(F): UT CALIBRRTION BLOCK: TITLE: PRESSURIZER NOZZLE LIMITATIONS RELIEF REQUEST NO.5 DATE: 8/7/87'ONE:
5 REV.RPPROVED BY: DRRW INC 8 E.L.ANDERSON NUMBER: 881-PRZ svoooeoave
-!p 0 4 0 DEG SCAN PATH LIMITED BY 18 PRESSURIZER HEATER PENETRATIONS AFFECTS 88 DGREE ONLY f)12" DIA S8 DEG.i-~SURGE NOZZLE 278 DEG.11.5 f)Tl APERTtgX CARD Also Available On Aperture Card REFERENCE DRAWINGS: REV: PRESSURE f TEMPERATURE STATS 188 DEG.SIZE MATERIAL SPECS SCH TYPE RELIEF PEQUEST NO.5 CODES;AND PROGRAMS GROUP ST.LUCIE NUCLEAR PLANT UNIT 1 DESIGN PSIG: OPERATING PSIG: HYDROSTATIC PSIG: TEMP(F)i TEMP(F>: TEMP(F)UT CALIBRATION BLOCK: TITLE: PRESSURIZER BOTTOM HEAD LI ili TAT I OHS DATE: 8/7/87 ZONE: 5 REU.APPROVED BY: DRAWING 8 ED LE ANDERSON NUMBER: 88i-PRZ-1 8voeo9osvs-(
t I f l l SECTION XI-DIVISION 1 EXAti SURFACE A-B-PROFILE OF VALVE BODY'ESSEL NOZZLE'R PUtiP CONNECTION 1/2 IN.1/2 IN MELD END BUTTERING (WHERE REQUIRED>1/'f IN 1/'f IH.EXAM VOL.C-D-E-F FIGURE IMB-2588-8 (C)NPS>'f INCHES TI'APERTURE CARD A180 AYofl051C Oxx Apex ture Cord
REFERENCE:
SECTION XI 1S88 EDITIOH REL'IEF REQUEST HO.8 REFERENCE DRAMINGSi REVi PRESSURE 5 TEMPERATURE STATS MATERIAL SPECS SIZE SCH TYPE CODES AND PROGRAMS GROUP ST, LUCIE NUCLEAR PLANT DESIGN PSIG: OPERATING PSIG: HYDROSTATIC PSIG: TEt1P(F): TEMP(F): TEMP(F): UT CALIBRATION BLOCK TITLE: SIMILAR AND DISSIMILAR l1ETAL MELDS IN COMPONENTS AHD PIPING DATE: 7/88/8V ZONE: N/A REV.APPROVED BY: DRAMIHG 8 E.L.AHDERSON NU~BER: 881-PIPEBJ-Shoo o9 os'-ig
.t ,l~W'v 1,.gP~4I gf VOLUMETRIC EXAMINATION FROM THE ID SURFACE IN LIEU OF SURFACE EXAMINATION RPV NOZZLE TRANSITION PIECE PIPE OR ELBOW 3 75 INES AFFECTED 98-RC-11%92"-RC-183 38-RC-115 38-RC-181 38-RC-118 38-RC-189 STRINLESS STEEL CLRD TI mme%CARHI Also Available On Aperture Card REFERENCE DRRMINGS: REV PRESSURE h TEMPERATURE STATS MATERIAL SPECS SIZE SCH TYPE CODES,'RND PROGRRMS GROUP ST~LUCIE NUCLEAR POWER PLRNT DESIGN PSIG'PERATING PSIG: HYDROSTATIC PSIG'EMP<F): TEMP(F)TEMP(F)'T CRLIBRRTION BLOCK: TITLE TYPICRL MELD CONFIGURRTION RELIEF REQUEST NO.6 DATE: 7/38gg7 ZONEo 01 REV RPPROVED BY'RRMING 8 E.L.ANDERSON NUMBER: 881-PSLNOZ Svoo oe oat 8-lg l t,~l f.t l BYRON JACKSON TYPE E PUHP DETAIL HORIZONTAL CROSS SECTION FIGURE HO.S DIFFUSER VANES DISCHARGE r OP MELD DISCHARGE NOZZLE FIGURE HOe i INTAKE TOP MELD BOTTOM MELD i'zarvgg CA~VERTICAL CROSS SECTION REFERENCE DRAMINGS;REV'RESSURE 4 TEMPERATURE STATS FIGURE HO 2 MATERIAL SPECS SIZE SCH TYPE 4fg)~JQ-PpFAtg~~gf CODES AND PROGRAMS GROUP ST~LUCIE NUCLEAR PLANT DESIGN PSIG: OPERATING PSIG'YDROSTATIC PSIG: TEMP(F): TEt1P(F): TEMP(F)~UT CALIBRATION BLOCK'ITI E'EACTOR COOLANT PUMP RELIEF;REQUEST HO.7 DATE'/28/87
.ZONE'EV APPROVED BY'RAMING 8 E, L.ANDERSON NUBBER:8BI>>PSLRCP
<i~
0 C 4'Mi AFFECTED LINES I-6-CS-23 I-6-CS-?P I-6-CS-28 I-6-CS-28 I-6-CS-25 I-6-CS-29 I-S-CS-21 I-6-CS-28 I-6-CS-16 I-6-CS-17 I-18-CS-13 I-18-CS-12 I-1?-CS-is I-12-CS-11 I-12-CS-18 I-12-CS-18 I-12-SI-f86 I-12-SI-'f87 EXAMINED LINES I-1?-C5-11 I 12-CS-18 AND ALL LINES UPSTREAM SIZE Ef(EMPT LINES I-3-CS-35 I-3-CS-3%I-%-CS-31 I-'f-CS-38 I-'f-CS-27 I-f-CS-26 I-'f-CS-33 I-'f-CS-32 I-3-CS-5S I-6-CS-16 I-6-CS-17 I-6-CS 3 I-6-CS-32 1-6-CS-29 I-6-CS-28 I-6-CS-25 I-6-CS-2'f I-3-CS-35 I-3-CS-3f I-9-CS-31 I-f-CS-38-12-SI-f86 I-12-CS-1 I-18-CS-13 I-12-CS-13 35 1553 I-6-CS-21 I-6-CS-28-'f-CS-27 I--CS-26 I-6-CS-23 I-6-CS-22 CONTAINMEHT SPRAY I-12-SI-987 V-151'f FCV-87-1A I-12-CS-18 MV-87-3B'5 Tl'APKRTUHE CARB V-151'f FCV-87-1B Abp Available On Ppertore Card LEGEND EXAMINED LINES AFFECTED LINES SIZE EXEMPT LINES REACTOR CONTAIHMEHT BUILDING REFERENCE DRAWINGS'EV 8?78-E-88311 SHT 2 OF 21 PSLi-CB-885-2 PRESSURE 4 TEMPERATURE STATS DESIGN PSIG: TEMP(F): OPERATING PSIG TEMP(F): HYDROSTATIC PSIG'TEMP(F)'ATERIAL SPECS SIZE SCH TYPE UT CALIBRATION BLOCK: CODES AND PROGRAMS GROUP ST LUCIE NUCLEAR PLANT UNIT 1 TITLE: CONTAINMENT SPRAY LINES RELIEF REQUEST NO.S DATE.8/1 1/87 ZONE.H/A SV09090RVS
-I'7 REV APPROVED BY'RAWING 8 E.L ANDERSON NUMBER: 881-CS 1
L 0 v StttS IIIII~1 V Stt22 OMO 0 C I I 1/tt41 0 C I L I VST224 1101)I 1/2 SA I VS)22 OILS I 1/~t(4 1 I 1/2 SA 1 C I I SO'S1 I N.C~IC'H Sl OIA ITTPI 0 4IR TO CLOSC SPRINS TO SPIN I SS)I 2 ITTP I UB j I 4 4 4 4 ULTIMATE HEAT SINK Rise Qv@hh).Aperture~g SI1'09090SV S-I f A JTH'O BATE REVISION BY CH 04 APP~AUT 4/g NO BATE OENIRAL RSVISIONS REVISION BY CH OR APi LATE 5gIB/QP SCALE APPROVEO~114144 POatl~Lllvl l~ST.LUC I E UN I T N 1 CODE BOUNDARIES ULTIMATE HEAT SINK PSLI-CB 007-I (SL1~M~-)SHEET I OF 5 REV 8770 E-80303 0
,LQNPON"NT COOL lNG SURGE T ANI(le 00142S)I C I/2 tt C I le r~L~Ll 1~~l~I 4 I Ii)24(42$La~l t er INST (ITP>rc I Vlilla14 7)/"'(425)-vsisss(427)
Vli>5(425)V)a~17(425)I~d f I VILL02142$
)ilt)(425)j'ONT(Nufo OM SNffl I I I~)20(42$I(1 Vliie(14tS I Vials)(4271 Vsi>14(425>
~425~"sg v>412s(427)
Qg v IV'I ta~a C I V alt?(4t>aL I Vliie)14t$
1'1 vsaut+2 vl4128(OR ffff)Se la(24(4)C 15 4 Cc.>u~~O~~n O C I C II'(cf(j L'li254(40
'+Coil;>tuff, ON Snffs)Jcl(I 1 vial)l(424
>)0 C It*~n n I n r LO 1-vlitto(aoe) n lt~I I V)ate)(4001
~I u, C.:*""'" I 0 Vlii))late>
fg~cs I)I~I I Vl'LL40(4ti1 v)425~(42)(o'-o~V IV fg s'V VILLSO(atS>
I=t.-Co~+i 1 t<C.SS I)/~CC s7 IVli?4)late) 0)tl r Vlii41(atil 1 v)a\40(ata) 0 C I C r-O lt V IV 0)-Se-sa)ae<)q 1 vli)at(ata>
I Vli?4'a?a>-Vla)$1(4?S)rt 1~I Vli)S)(424)
~I~l 1!V IAr I-SR-Ii 74 I Oa 20 X 14 RCO (ITP)5/4 1)0 C'~I~1-Vl@)$2(425 11 at t>r~0~I~,)0's I Se la)7(vl.:.~.I-vsi))0(ati>
LOI rt t~~~~I CC.241.I V I I Vli)40(425) 0 SA la Te>e Ok 1-v(a)af<42$
>ft 1 0 C u lt IV r M Vo n o rn r r 1 via)$)late)I via)si(4?i I 1~I)/4V~Il I-Vli)4)(ate I/I I Vli)ai(424) 0 C~~tV a r.o~I>~I SHUTDOWN COOLING HEAT EXCHANGERS u~I~~>v(r l~>>r~lr~LO 1 vsat?2(ate) 1 C tt>g rsatai(ati>
-f'I~u~V~Ct j C(1(15 Ttnats)1-vsatar ates C I V)424$142il IA~/.I~I 1~el IV M M~I lt CONT SPRAY vla2ta 425.II P U IVt P S ll CC1$I II~l tl ll>I~J I r~l 1~I 4 a 1 Vlittllat~>)a I I Vlitte(ital PUMPS j II~I~~()cia--c~c=>04 I>VV I C I Vlilei14?$
>I V~i?01~425)Lo (LCC 7++I Vl ite)I 424>~I rl tl 1A I Ville)(424)
I V)at04(42i I I tt ttt.I(tr~l t 0 I I C I v(4207(ats)
/I V)alee(4241
)/a CC 10)I 11 (I~tl I~I~~~l I~ll~~(~~~>~~12 C~~cv444 4I I 2 cC Co 4 a)?C:.<<-" V 142441<<ll I V(4274(42?1 10 I.;V, I?~CC~t ca.~C DI lvli277142alt f>>LO(1-v lie)s..I"'.P.S I.PU)XPS I C I v litt?a?5"-5 Vlitle(42S>)pt Q'",~It G-'Vlalt5(4?5>>
~~Al80 Available gz, Aperture Cagg 5VOg 090gPP AOTH No OATf Rf VISION er CN 04 APP AUTH I v/IL Cr MO 0412 IAACTMS afoRavM.GfvfaaL>fv1$10M Rf V I$10'((D ev 0 lf 5/Ie/Ol 04 APP SCALf Ca LCC fa MO CN R atpaorfo ST.LUC I E UNIT ff 1 CODE BOUNDARIES CORPOMCNT COOLINS V41fR STSlfa PSLI Ce 007 t (SL1~M~-)SHffl 2 OI S RfV 8770-E-80303 tlat>er ter(a~alert (ttrtrr
(4 DOTS(OC CONTATNITENT 41 ll~Vl l)44(42()SO 14147((A)tl lt le l SO-I~14411C)a Yl l(70(4tSI I OA Ttg I~~1 Vllgee(etl I~~'g~VENT 0 (C I YI(1$1(4211 I 1'C TOT 7()~Y(4~5(otr<<)
TIE~':5 To<<SW-C" Zt OCC T(C:CW 1A I/(Ccet (Rt 5)TI~4 ge Tg VI I'V(4C ((525)K.V(C(tge,t.5)
)~14(4414241 tl Il 1 0 2 tl AEO liTt.>lef$105 CONTAINNENT a~\~C n~e n Co'.VI444A(525) t.l"057 ,,,,-aQ VILCOT 575)I I CC-~Ot I C 1~Tl l Vo (425)tl gel TO"74~25)ZC ITCLCW I SO tg($4(IA)~II 20 X tg (1TF I tl~4 1 CONP.COOL WATER HEAT EXCHANGER (-V)4010(42$
)1 Y$0 14001(S)r4
~g 1~~1 I VI4$$2(424)T(l~~4 2)Mcr n ee M n g)IQ ee 0 l f4 f1'~I n 10 IC 10 M n re 1 Vgl)04(42$
)0 l:-1 Y(4217(42$
)I-vl~Slo(42$)I o M>3 0 n Qbg D I VENT P (TYF)te fr tt~4 10 I 10~4 ft ge ij Ij jf (Qq n 44 n O n n M~l n~4~4 n rn fe V~(f el~~4\I ee 10 n er rl M n el l I 7 o 0 1 J 20 21 4 n n/I I~l 10 I te Q(V W 10'0 I 0 OO 22 D 1 2)tg M I~4 n~0~n I g I n OOO'CY LO.I et le\4 M n ll l~~n r n~~a n rn<<er<<44 vn or 4>>ne frn-II<<l~r~ar a<<See~S~~~~~t4~V ar<<n~4 I v(~~T fe te u~1 I~T s 1 eo tg~l~4(r n ft'r 4(~g~~M e Vlltl)(424)
~~~S'n tlg~~~0 O~.I r t I e 0 ee tt~g~e n~M n e I M(e~~rg)4CeC(gt I 4 D g<<R 4~t T~)Qw I 14 CC TOT 0 I-.4, t C!CC lT(e)JC(DOC)(H)0-&Y(2 I C D ri-1 let e fe~t I~t I Vlg($7(NC~.I V)41<<~I SO I~(771(CI-I V lilt~I~tl I Vlg)74(42ll
/tl D l~I VKN'(1 vlg(42(42$
)'I I CC le)Tlg I~~tg ll~I 18 I Vll(42(etS C I 0 Vl~141(Pl)I I CC F 4'tl CC~2 I tl CC 11 C I NC I tl CC~NC~4~~~~4 l~I SO 141401 IAI 7LD~4'4>>I OA 1-V)4101(ete)
~~l~~~II (-$$-14144(e)I VI S)4'l(4'le I tl I~~M t n Il(lt gtl)n Ngs C 0 e I V 44 n~n 0 C t r M V cc ggo 1(tauLWmm ecc,,e Rtll: 4 VL(gl~(4~L14C.)LF-dl a re n le r(T~)Q I 14 CC I I(~4 n l OC ee n r Pci<<n n'4 tl re I'OR lt le M I.L n~4'n V 4~~t tl te~\n fe n te r~~(SW 7 n fe r te~V~n Q C I C I (cco)+liF ITVF)~vgg"()~WmC 0'12 AKO llvr,l tl 2 Il AKD (ltr I I Vlll14(424)
IKTTF STRAIT EA 1$$141 ('(Tr I Qt~4-g~co l~-)I Vllltg(424)
QSO AVah~L~aperture GQ4:.vg'4 C 74~7 OLC Ave/Tf COY(PONENT COOLING WATER PUHPS CON()TRIED FAON ONCET t~(te)I C)=CA I C D I 20 C I 14 0 I(2 I 24 CC I, 0 1'1 4207(42$)svooooosvs gi (SL1~N~-)AVTN ND DATE REVISION OT cN 0R App AUTN Nd DATE TAAC(NO TTEDAAVN OCNEAA(.ACV(SION RKVI SION Ot OR AFF Tlgeggl toe(i~lgltt gtettn CATC S/le/Ol SCA(,C 0 OA LCC EA No CN AFFAOVED ST LUC I E UN I T+1 CODE BOUNDARIES CotIFONCNT COOL(NS VOTER STSICTT FSL(CO-001-2 STIECT 0 OF 0 8770-E-80303 (TCV 0
O~J I tV sv s 0 n tt I n M~4 I IV ts~4 0)V 0 v I SN212(O(>44) tl M M I 0 e O M et z Vl Tw s}>l r;.=:.--Wvwn>o:~s Cw 37<4 (~I CW 32>0~4 I 7 Stg<233(I I I 0 tl'v V 4.2~Z CX VC wv 0 n Sl tl vs w I~v s s n tV tt Z~I 4 I I SN 212 SIT4etl H v X w ts s wss ts Z tl I SN-tltST(744<
n n 0 H I se~~I n~4~V~PR$i~~7 SN 2(tOIIT45<
sv z~~VV~V 4~V Z st I SN tltotlv43 w IJ-: b V S S n Z sl~O'M IV X~V X VI tl n n Il I I X w~X n t4 M zn wv~w 4>3~4 C tl 0 Sl)e sv zn ll V~~Gs~V SV C n~4~4~0 V Z sv I AUTN~J O n n-M tt X w I ll X IJ X l 4 Cv n Il n IV tt e 14 t4 Z I 0-~oi n n n t4 M e n I~4 M tt~e w I 0 n~V n M M I~4 0~4 sv X tl n n sv~4~I~0 wo 0 ss'I I Iz oosa St~wa w n~V tt Z 4\n~V tl 4 ft e~4 X~4 I co ll~n w 0 te SX-IS I n D~t w O se I ew 0 cad OQ w w v<sl n I n tl CI I Oi~V~4 M~l w~4 n M tl 0 I4vst ll sl Z 4 I Ot ISS'I S (11)I O n vo M vs w n sl n IV ee n tl n~V Z~ll I NO CATE REVISION'Y<EIA, TRAC>NO REOaAvN, OENERAE REv)SIONS I ll n I I nF 8~4 0 0 V V~~0 I'V s n 3 ss~4-'ES IJ 0 n IJ n V ll I~4 Z lsl M~I te sl I n I d ll I n 0 V V C O V~4 3 I I V tl n t H~t~4 I tt sv~4 oa>E s>s~>ss SCREE FP ST CN OR APP tssslst tnss~slsts sssseeen 0~4 IV I~Sl V I n 0 0 sv'X vs I sJ I 0 IpSX~V Vs~4 4 n H I e~v~V X 4 V 0 3 n 22 Igg n n n 0 M~4 s}30 CV I 0 te n sl Y: 3'C<V 30<SN t<OOS(3<45>
'3~(IV.30 2 n n~~tl 4 ll 30 CV we HzCw c ww~Hs V.ZOC)0 S S.sl M M Z v V n n O M ee~4 I~T n MW~~I~rf I e,~d Ov<ez'I else)ws~Vl I CW 33<"I CSV'337 w w~4 tt X lt t4>>'IJ n 3 V vn IV v 0 d t4~z VI , I CIY 3'V 0 a n n H n n n 0'\-n z Vl sl 0 ('I W 3<7~~SNt I<4<(T44 l'Swt<OOC(OJS>7 w VI>SH 2<007(3(s)>
~>SS tl Sakp, w SEE OET,'C 2'cw.30<w'Ssst<OON(SAS>
vt<005(357>
~g~Cw 307 I SS 2<4332!Vt<O<0(557) 2 Swt<0(l(0<47)
T.S Mt<0<2 (S<e7>)w st I¹'H APERTURE CARD Also AvailabIe Oa AperhIre Card ST.LUCIE UNIT Nl COBE BOUNORIES INTR>(E COOLING>(ATER SYSTE>(PSLI-CB-007-5 (SL1~H~.-)SNEET 3 Of 5 8770-E-80303 C I=>~AET SV09090272-QQ
AIR SWPLY FOA NV 0 14$1 1[OO3e~I LEAK 11$'I I YI~Itl(tl))1-1~-la-M 0 0 I O'1 ACCUN 1 I ACCUA 5/I 1A 10)I 1 14 101 0 I VI~ltt(1547)D2-IA-100 T.V(5095 O)(5)I 1NSIOE CONTAlNHEN'1 OUTSTOE CONTATNIIENT I Ylelts(0571 7 F V~I 1 1 SS I 4)/I 45 I V10450(MI) 0 I VI~105(0571 u i i O u I 5/I I*100)/I'IA 101)l~14 10))/I 14 104 L/IJ I 12 lat4 I..IA 1I0 helv ACCUN I vleot71521) 14)I-VIS(043 ()II)Z.VIS)002 (544)0 1A.lit DVU3(044(324)
Yletet(til)
I f Y I-v)else()ti)
I e 0 4 AIA SUPPLY f 4 V 1 t 1-e-OL-li IA 2)/I 14 li AIA SWtLY foa YFY2')7 Vlettt(tll) ts 1 IOQ IA 19 I Y)0440()tl))li 4 I 0 0 I Y)0454(MII
)/I)4 I V)0457()tl)
D 4CCUM I (3V VKHDOIE.I Lc(4CCUN))l~)4 to I)li 14 01 I 1 IA 04)/I 4.I)/I 42 4 Z uu~4 au Zu 4 Z uu I 4 eu ZO 1-VLSL)5 54 Q 414 SuttLT FOR T F V 0 V)ettl(tsll I Vletto(tsll A)R PECULCR fOR YACUU)4 RELIEF YALYE I V)027~(tsll I Vlet)5(tsl)-S4-14.20~s I~I VlettÃtil)
I Yletee(tii) 0 I I Vlett)(till 0 I)/I 14 I-Vlett((till I VI0207(tsll Lli 11 4 VENT VIIN FLAME 4RRKSICR OIKSCL OIL SIORASE TANK 14 C I O II o n I)/I 14 t I.VISL)L((347)
)/~IA 00)/I 14 07 I Y(04t)()til 102 I c o I I Yl~4t)(1517)~loI*85 P T.mO)0(r(ul) 12 14 ts D 9~~(CCJ I-IA 94 1-V(2)047(344 1-V)SOI Sotl)INSTRUMENT AIR SUPPLY TO MSIV'S TRESTLE AREA Also Availabf(." Ckp Aperture Card svo9oeos>~
gq I~-DIESEL OCN.OLDO.n n n D 0 1 ZC 0 Co ZO ZN 0 CO zo n n n~1 tl~~~~1 0 D I I Y)eeet()t))
V I lit 14 I I 1/2 14 4 oe I ts OL(~1&(I SR)OLD 1 0 BD I Yletel(525)
I SR 10 44 I VI 0245(M))1 Y10270(5531 n n n n i 11/144 tl I V)02571)t51 ACCUMULATOR
~I-tittle()t))
~I I V)0250(5251 I 1/2 44 INSTRUMENT AIR SUPPLY TO CONTAINMENT ANO ANNULUS Y10270(MS)
~~I 1/t 14~I 2 00)I Vlttoo(427) 0 OR41N I)00 5 O n O n~1 L)1 u T.V(7(51(324)
I)/I 00-1 I YI7t05(404)
C I u I V)7220(4071
)V I)202(400 I 150010 L C I DC t'-V)7204(4lil (dt Do ll I 0(CSKL OIL TRANSFKR PUNP 14 1 VIMOT ((LDT)I 2 00 1)I YI7204(4071 UNOKROAOUMO I tD015 ci n 0 I C I)0021 C 0 I Lli 11~4 VERI YIIN FLAME ARRES'ICA DICSKL OIL SIOR40C TAN¹le C I Ci o O ill I 1200M YI7201(iot)
I)00 t1 I C 0 C I 00 I n n 1 Vn 192 (324)O O I 2 00 t)I V1721014071 C I I Vlttl1(4271 DR41 N)-00 C.O n i~I 11~n)/I 00 2 I V)7215(4041
'IO UNIT Ho,t I I-VI7217(4071 I C 2 I V)7214(4~4).(7(-DD.It DIESEL OIL TRAMSfta tuht 10 I t 00 li I VI)214(407)
UMDKAOROUMD EMERGENCY 0 I ESEL GENERATOR SYSTEM LS I~I OAY TANK FDA OICSKL 14 DIESEL lal I t D0.20 DIESEL SCN)A DIKSCL SKN 10 (2 DD 29 LS LS 11~11 Vl)141 V)7147 12 DO.SO I Ll I~LS LO I-V)7)41(5271.J cl 047 IAMK f 04 DICSEL 1~I DAY IAMK Foe OICSKL 10(4LL INSIAUAKNIS 1 INICACONNKCTIMO tlt)NO 10 CNEAOEMCY OICSCL etataalDAS.IMCLUDINO ala I STAR()NO.FUEL.LOSE OIL aMD Valta.ala IN)alt AMD KZNauST$101(AS vaSDKSIOMKD AMO SUPPLI CO C<<c I)1 Ll Ls L~2D021 Ll T.Vnice (527)Da'1 IANK f CA AUTH No BATE REVTSION BY CH oa att DR((CL NO BATE OKNKAAL REVISION REV IS(ON BY CH oa BATE 5 IS-81 SCALE~LSSLSS BOWLS~LLSS)(OOOO OR OAS ER NO CH R APPROVEO CD 0, KENT ST.LUCIE UNIT N1 COOE BOUNOARIES MISCELLANEOUS SYSTEMS PSL1-CB-009-1 (SLi/M/-)SHEET I OF 2 REV 8770-E-80306 4 g OUTSIOE CONTAINHENT INSIOE CONTR INHENT I-VOSCI (125)q R11 I v08104(125)l I-VCB)00(125)I-V08103(125)11 et I I V08106(125)
I.V08105(325)
I SO Iat$2'HAIN STER)1 0 0 I I ts Iatst I.V08107(125)
I-V08109(125)
I IIS IIO 1~~tl~IC~Oa~I VO8108(125)I VOS)10(125)I V08203(124) 1 PA 0 I AII I 001 I-V08201 (124 I$/1 Iat I~00 I-V08433(124)I 0/S Atl 101 I VO8434(124)
I 1/\IISI 102 I V08435(124)I)/1 ASI 1st I-V08436(124 I La~111 I-V08202(124)11 tt I I 1 STEAN GENERATOR I IA Qeg I (SECONOAF SIOE)fa I-L08443(124 I$/s Iatl 1st I V08444(124 I$/1 ASI 10$I-V08445(124 I$/1 AS I IOO I V08204(124 t/1 AS I 101 I V08446(124 I-V09252(357)
S I 20 sf Is I-V09102(123)
FEEOVATER~I-V091(7 025)LI 1111 1~I~tat 1~I~111 1 LI M a I La 1~tet PAOII I VIA 1'I I I~I LI~Oat~OI~J BLOVOOVN Hl/2.NSI IIS L.l 9012 I-V23100(327)
I.V23773 Q22)~(I>5.~692 I-VP3101(323) 0 I I)/0-S-t Si V23102(327)
Also Avai1abgy@g Aperture Carp I V23274 Q25)T.I.B 90 FC I ICI I~I I/2 0 01 Si 0 FC I ICI~I 0 FC~'at II)I I HS 121~~/2 IIS I I I 1-1 I/2 IIS-I)9 I-v08307(325)
I-v08374(325)
T J-I-V09117 0251 I-v08375 (325)~0$II~l-l-11S 122 I.I NS-II2 IS I IA 10 0 I-V08328(325)
I.V08376(325)
~0~I.VOS329 Q25)I-V08377 (325)DETAIL A" HSIV STEAN TRAPS SV09 0909<m AUTH NO 04TE REVISION BY CH APP AUTH NO 04TE S(II(AAL A(VIS(00 REVISION NC Oif(BY CH OA APP OA'IE 5 18 81 SC4LE ILollaos tofct~1 I Isa coatsta C.S.KENT ST.LUC I E UNIT<1 CODE BOUNDARIES IIAIN S'TERN FEEOVATER~BLOVOOVN AUXILIARY FEEOVATER 4NO CONOENSATE STORAGE SYSTEHS PSLI CS 001-1 (SL1~R~-)SHEET I OF 3 REV 8770-E-80507 C (=1~1 Z.VD~>>7(505 w 4I I Ivr 2 VO~lit(5051~I I ICC(I 01 I'I 4I I~SEE DETATL A (PSL(-CB-DDI I/2 Tl'1 Ilt<FILI-CS-OOI->>
SEE DETRTL-A IT~I~1~Zwoll74<I'I/2 Ns II I 5244 0 2 VDISto(MC/)
I I NS I I r I 0 0 OV 00 0 I N TIN~n VN~~'I r 0 TI~t rr V'V 0~00 I TT IIC~55 r N 0 IT N h~I n n N N n N r N TI VI n VI~~0~II rr~~~I it-I TT~n w~I I n TT n~I I Na 0 pr:oft 0)0)'0 I I 0~1 CI I I I Tcr 0 0 I I n n 0 o CI 0 n I 0 0 0 I/0 A VV~~~I~I TTF, DI(TF OF I 0 1 I'NS9~DT($81 I 0 SAN TTIFZN I I 0 E I o 0 TT IV~IS I~N 0 ZV)8(54(N0 Y I I ITI To<<T~'4 2000(aa(5)0 t<DSCIIIMOI I IT 4 01.9 0 T3 I SS I/NS tVOI I I 5(51 0)1 TOI (92 I MO)1 SS I/2 ITC Z VOI<45(SSO~I
~ZYOI)50(5501 TT 0 PT~I I I 2 YDSS(r((325)
T.VD9359(3t5) 4 2 Vi~14i(SI0 I 2 VOISIl(MC) svo01511510) 2 Y00707(52~)2 YOSill(stf)
Y 2'v09358(325) 2 I ldl: YOSSOO (325)Z.r.Sf~102~I 0 Z V00553(M5)
Z"VDSMWStll Ft OYAT I t N I I 0\I 5/I ICI 121 C I I I LO P<I ITS~5 2"<00147(st5) 2'I<00<it<MS)
I II I to If SS Qo los)43325)Z VDSZS((<25)
Z Yo)2SO(ltS
~I I I I Sf 7~LS.~t>>I<550 tmt<20<O)PI~I~a(DTSIS<MS ZNO t 5 I l I 52 5 C I I 1 Lo~Sf ,~TNDSYPC()25 ta(40148(2 VOSV/5()25 I)I 0 M51 ta2)0)701 stS I I TTS So I 1 Z v<4432(52$
)1 I D I I I Sf)I (.Y 1151<550<HISt 0 (a<St<at<525&
NOT)50<MSi
~I~I;T(ot)47(sts C~VDt)4~(MS)~I~I I 40tl<4<MS)2'I.~)0 2 voss<TE()25) 1 20'F Si'00932(()25)
Z.vos))o(525 Z-V05283((25)
T'Vottttl Its)I Votlls(525 Z.Vot)00<)2$
)-FVotti
~I 2SI I~TV TT I If 10 C 1 0 0~I 2 V093<TS(325>
~'(Vdttt>>112S)~r.8~Col Z Votlli<MS rVotlls(52S
~(Z.Votl44(525)
Z-YOt<as(525 I TT 4TV TT I I Sf St C)o 1<11 I~Sf 2 r Dc TDD 00.9 D C I 0-WV093)Z(325)
Vdts(S(1251 2 V093)3(325) t Vd)2001250)
AT.t LVot I lt<MS<VDII II IMSI~I~I~Saot)00(MS
'O~I ID<M 5 I~SF tt C'I~I~I 2 V01142I 525 I I 2/(00505<Ma)
I 3/I NS Iso<ZND0470(MS)gt" 8 I I ASSI 2 VOS)r9,'325)
TT/VO9308(325)
, I DI~I 1'I 0 I I 5 4 (M 5 I Sf 41 2'wv204<I<25~
rT)lss(sts)
I C 0 I~Sf~e~LO'o SI(SIOI ZV)t<57<SSOI
~\~I~I Svt t I 5 S I M 5)T.T'ot I'5 4<5 t S I Nap~NIT ATI P@N~TNO 9 Svl (5 25)"VDS 3<I<a(325) 2 I Df TSS TT~T I~" Vof it)(525)SVDt<SO(MS STC))tl(MS)~ICt<25<st5)
TT CT~Wot)25<MS 2<011 2 4 I M 5 I I Sf)0 LO 2" 154(5 IVDtlss<550~I~I'TI 3 rD)IM(5)S>trot(sa I MS I~I (VC)lsl (st5)I ZWOt)52<525
~I I~-I 40 1 C ZNC)ttSI llts C I~T~~~~3$I IT 4 T)Z.Tot<0~(5<0)v Lo ZAOS)NT(NS c-':at)9)02()25)
P-" I I Sf 43 2'Yotlao(stt 1 YOT)S)<SSI Z V011571525 0 nn N Tv nn vv'V'V N TT~~n~I n n n~I C I I IT IC 2 VCS<71(525) 2 100172(525 I~I ii'I Z.VDI)75(52$)2'VDS<74<5251~I 41~I I I 0)VO(39 I Sf 45 (125)2 VOICE)<MS)I IT~I~Lo 2%Alit(52S) 2 VOtlol (MC I 2 ldsa Lo (525)10 Z.vs)124<5101 Z.VDtlts(5501 2 Vdtltl(MS I~I~I~AUTH ND DATE REV)S)DN 1 Ylt451(5251 co/T'Tool'ts(3tl) 1 Vot)07<550+
2 Vot)OS(525 Y12505I~211~I~I I 2 Vot)tt<527
~1/2 Sf 2~Vot<00(lt4 I~/2 C~Ii PI It I 2 Yl Sol(itl I~I It I~I~I I I/t Sf 2$0 It 4 Q'!n Lo~(0 C 0 I I/t'ITS 2 VOISoll tlll Y1250>>424 oa I/t C II)n 0 1-0 C IS I-t If St I/2'III~YOTIOS<52$
I Ylt(/90<4241 C D V12't<424)1 Y(250514241 TI I 1 Ylt500<42l fl It I~I~at)JAAY f (DIAT I Ilt'I I~$$lt 2--TEITF 1<t 2 VotSOS<5471
~I If 50 C 2 2 I 57 4 CIO Lo Y125021411)
I-~-C-I)Y<2l2414tl 0 C YI2l25(itl I YI2itt(421
~I II I RUTH Bl CH OA Att I lt 2 P S.R C 1 Lo I I CSI 1 YltltI<il~I ,~4/Ta ND DATE I YI25 (4211~I Tt I 1 YI25 (424)I~I It I 1 Ylt(12(424) 0 0 E v r 0 n~(FW 111 C I 0 Ylt<TS>>421) r 2 R2112(CNZ) 2 4'C.08 taot(tc ($$It 3--C 1 Y 52)II~I Lo I 4 ca(4 2 Y<tat)(<T(t Z.YT(5?~4'C I\t 4-C Il'4 I'I/C'Y 0 2 r020tl(12)Z.V(teta(124)
V LO.4 C~Ol ,~<ta C~TTVt t)t.V<t325(324) t/vast<)AQZT) 2.24 Sf 0..Df-4 Wt N)/C'I LO ZVOSOS (</Tt)DAlE 5-18-e)sCALE'tatAAL A<V($(ON REV)S)DN BY CH CDNDENSRTE STDRAGE TANK Icc1 I I'C 101 I I C IDS 2 V(2483(625)
IC II~Also Available Og Aperture Csgd t-v(2484(625)
I I IC<02 2-V12485(609)
C I Z.(t tfV 09090878 (PNR.R.-)ST.LUC I UN T<(1 CODE BOUNDARIES HATH STEAN FEEDVATER~BLDVDDVN AUXTLTARY FEEDVRTER RND CDNDENSATE STORAGE SYSTEHS PSL)CB CD)-2 SHEET 2 Z)F 3 REV 8770-E-80307 OUTSIDE CONTAINHENT INSIDE CONTAINNENT 11~1 1 I V08152(125 I.V08154%('I 25 I-V08%35(lt5) 0 I-VOSI34((25) rl I I OL%%$21~111 I VOetst(125)
V I Ot 1%$$$I.VO8140 (125 I-V08138(t'25)
I Vt)0(59((25)
HAIN 5 ERN I.V08141 (125 rr~tl 1 1%$1 112%%1 tt~trt L1~11'1 L1 ttll tr~trl Ll~ttt I VO8501(124 I VO8451 (I 24)I)/t 1%$('10~I V08452(124)
)/1 1%$~I V08455(124)I O/L 1%$%%0 TV08502(124)
I 3/~1%$1 111 I.V08454(124)I V09294(557) el STEAN GENERATOR 18 Ieeg (5 CONDARY SIDE)I~V08503('124 I.V08455(124 I 0/t 1%$1 112 I V08456(124 I)/~1%$1~)I.VO8457(124
)/1%%$1 I IL I)/1 NSI 110 I V08458(124 L1 tttt~1~tll 1 Lr tt1 1 c I V08504(124) tr~trt Lr ttt1 0 I-20-OF-tt FEEDVATER I V09 I I 8 (I 25 2<09100 (t25)BLOVOOVN I.VOOASC/(ll25)
I/Oecsl(ttt))
IL Ntl lie LV (t-e.-ett I V25125(527)
I I I-V25127(327) 1 I-Vtsttd(32$
.4 elil FC t 1/2 0 to I-V25I26(525)
I 3/e-e 10 1 rcr 1~3.V2321(%(322)
I 1/2-0 12 1 rcr 1~1 rcr et FC APERTURE CARD Also Available On Aperture Card SVOOOOOI V 2 AUTH NO DATE REVISION BY CH OA Aee RU1H NO"trt te DATE OKN(CLAL A(VISION REVISION NC 0%%4 BT CH OA DATE 5-18 81 SCRLE ST.LUC I UNIT tt I CODE BOUNDARIES HAIN STERN/FEEOVATER BLOVDOVN AUX'ILIRRY FEEDVATER AND CONDENSATE STORAGE SYSTENS ttSLI-CB-OOI (SLI,R/-)SHEET 5 OF 5 REV 8770-E-80307
'I tl I~ll~tll~Ill I l I I L J r---1 1 I L Vlltl Y141 Sll AC 24)Vill 0/4 AC 244 S-, V1 41 4 IC I~ll I$001$1/SAC&11)N/ECTEON 4 SNUI VN 00 ENO li 1 l VI<IS ll IC~Ill I Ill CD It RC ISI I AC tld SO 4 0-a-I M ll c n R~A~TR COOLANT PUHP EA1 4 I~r~4 I Ct 0 c~E$0 LOOP EAI QS'4't 1 L(,f(TO fE 4011 I I 04 MS-St 10 I--2$ttl PA AUTH NO BATE REVISION t41~I I I l 1 I I L J Vi<22 Vl~11 n tr O IC I SOOIP n BY CH 04 APP fa 4 I V t St ll I 0 I I I-IO Sf 01 I RC 120 I AC Ilt ltd 1 STEAN SENERATOA 141 I AC II~I AC I'lt 2 AC'I IS tlt~'l I 4 4 C l 1 I L J I SOOI 20 E SOOI tl E$0 01 t4 A T YYY7 4 M r 2 AC I tl o~V O IC'~r O Et n O O M ll~C O ll CC'l ll~r ll~l IC n~D'I i 0 cCP I L 0 M M ir M lt M IV n VI<I~EB-0 I 3/4 AC-244 4 I.-EPO<853 IC IIII 1 I AC R~A~TR COO ANT PUMP EA IIIACINO AE044VN OEKEAAL REVISION 0 I NO BATE AUTH REVISION o N~Ill Vl 14 tr+O n I O O Vl n O M l+ll n PDI II T I L l I I I J M L BATE BY CH 04 aaa n O O N IC I I I I~4 IC O I Ill ll C.102)/4 RC 104 2e,-O M+ll lt~41-ir n~lll I L A E sJ'iS/IO/Ol SCALE 0 I R(800 y 1441 v%I<$0'a 104 INC(801-I R(809 yl<<g L(I(VI<SO I 8(Bt Qelgt 0 E~0 Y<R(dtO A I 1-$0.Ol-trd Y<R(1$6~0>I'R($0$PR(000 W l,L(lf(I-Rvt0$P I R(.dtt~'CD I I R(Btt sC5'VVI<4&
r~0 2 D$0-AC-Ilt 4 I~T.S00411 4 REACTOR vltls<VESSEL CONT I NUEO ON SHEET 2/4 14)/lr FTiil-0/4 AC 200~j~~n ll~C/~-AC-20)0/4 RC Ill ID 2 RC 104 Yltl I~l Y~214 A 0/O-SS-DOS J')4 e N VQ>bl CC 2 4 4 4 4 x N hl$0 RC 11$CNAD IN N~l~I a NPS I-CC Cl IL M LOOP IAZ va APERV'imp~
CAan Saf(ly INJECTION 4 It RC IS~SNU'IOOVN 00 NC Na I CO Also Avajfgbfg@@AP~<<l'c Gled ST.LUC IE ff I (SL1~R~-)CODE BOUNDARIES SHEET I OF>REV ES F 09 09 0QV S~~}E-80308 r
I D 4 Ca Fe VI101 S 1 11 0 4 V I~0'5 I.C L I~.RC-ITH FAI 2 I/2 RC I'57 Y4 AC 1st H 5/4tgt VI 405 LO I v I.ac 804~4 0 2 1 DDTT T I.ar as OIL I AC 022 4 8 I RC-002 5/4 Rc$4 I~I-aC-B24~T'$045<5$aa N al I 0 1 N 12 0 YS SS-616 I 1 4 0 Y4.AC 112 a~ACJQRVOI 7-Ce~Oa a0 ae AVX 4AT SPTT4T DT P'I T a t 0 A t Fe 01402 POWER OPERATED RELIEF VALVES I/2 ITC 154/g 100 J 2 SO Dl'15 D Da'0 DDtt*I$0 01 55 V I 20~V 115'5~Rt I AC'104 5/4 Re 140 I 0 4 011St 5/4 RC 201 VT454 I RC'IO'5/4 Ae 200 PRESSU RIZER 5/4 RC 20t$0 01~t0 5/4 RC 2tt VT204 Pt DDOCR T I I RC 105 t$001 ssg I VT200 I 5/1-RC 14t@04 t I Tt~Dot SATTPLC TDCat Cx NANO R 0 y-A I 01450 5/4-RC 2t2 I RC 107 5/4 Ite'170 5/4-40-205 y D 1 a VT440 4 I-~t-$0 Ol EEI-0 I 5/4-RC-2t5 5/4 Re 170 V I 451 I RC 150 5/4 RC-2tO Tt 0 ill VT205 5/4 AC 2t0 i I EB 4 I-~t$0 OI 0 I 5/4 RC-2t4 V1201~1 D RO t PT~0DJ Pt D l T I I TD00 I I L J I RC 150 t$001 vl 200 I H3 4 8 5/1 RC'171 t t LT I I I J$001 10 Kg Vltl0 0 A t 4 I 5/~$$45 5/5/1 RC 175 SAT 2'IT INJECT 1 ON S~N~l V~A N TR N POLI-8-004 12 RC 152 4 Rc 144 Pev 1100 V1210~ot VT251 o~J E n 01252 VT254 5/1-Re 110 VT250 r I L ttl~Dlt T at 5/1 RC 110 tey 1100 0 RJ 0-01210 VT255 5/4 Re I~I 01251 ac 100 T5 AfPLRTK4K 5/4 RC 111 Aiso Ave@I~0~Tterture Carcm VT111-~VT 111 VT114 5/4 AC 215 5/4 Ae V0425 ll tttt tt 50 AC 121 5/1 AC 212 0 I 4 I t SO 01 55 I RC-222 01124 D~DDD TR CARD t.OOP 1 8 I RC 150 NAAO NO N AIDP I 1 10 tf 0021 P\C R~DDDR COOLANT PUNP IBI I-ae-22 I 4 I 0 t$0-01 51 D RV RJ E 4 I 54 NS 55 TAO~PI~>PD57-~Ei A~PS I~8i lt 01'2 t 2-0-2 I o aO u 50 RC RJ Dt tt 121 R N tilt NR Tt tttt IR0 o CJ VR lt 0~Dtt~Ttt RO TT VD~0~0 ttl~Tl~1 tt RR It I RV n S TCAN I AC 151 GCNCAAIOR I-ae-110$0 Ol 2t 7-SO-01-50 t$00151 I$0 01 52 VVVV~E Vl255 tt D 2 RC-142 AUTH NO DATE REVISION BY CH 04 APP AUT CONTiNUED FROM SHEET 1 I/DLFRV TRACING RSDRAVN, GCNSAAL REVISION REVISION NO BATE REACTOR V ESSE I vtzit DI I AC I 50 AC 121 o 2~2~oz 0 N RR E gia IITPI+~~TJ 0 D o RD RJ E n I I RV DD 0 o RJ n RV tt~01 D~0 r---a I I LOOP tB2$41$1T tNJICT ION SNVTD VN (4 01 BATE't<~~11171)(1145)(VIZ>I)(Vlttoi IVIZI>l v 1 tle Y mo 125t I (211 I I'250)5/O-ac-ttt VAPIA ICAL 04414 CA V I G'1.0>(PRESSURE vaPoa sEaL OLCC00/r AV>V (1144)(11741 I I)Oil~I 5/4-AC-Itt~~
(>t51 I I tl I (1151 (YI 1011 I V11021 IVI50)1 v>500 I Ac 257 IZSOI (257 1 (tie>(VIZ>51 (V>214)IVI2051 vlttt 5/0 AC 257 Cv)55$)(21~)Iv)5541>25tl CV)555)Itic)y>152 (I III>rl 11>701 111401 111601 11170)rc 111401~G>0 1/0 AC ti)(tlt)C201)Itll)(VI)411 IVI 5421 IVI1>11 v>140 Ivltttl IVIZte)0 Iv>207)~I y~YI Z>4 CO>CIRC(.LKO rp (>>It)pr (11721 l>lt I I lit>QLYVR~EA*C G 5/4 CH-005 tit tOS CHARG(NG PUMPS Bi~PSLI CB-005 I 1254)1255)(2541 5/l Ac 2$5 V~tel CVIZIS)(VIZI4)IVIZO>I~I GGIG I-SO 01 5 1-4)I 71 (~)(114>1 (I'1711 I IIII)l ()Cl YI SO~fog'V'Set~Y>54)>a>I 4 r 1/4 RC-BCO 661 662 (161>(162>I le>1 5/4 RC 160 vl)tt I)~UG G*SKAL 4Y IV SK4L av IY~OV~A~A LOVKA SCAL Cavl~v Rc I~4 (II5)I)64)(II7)It(I)1247)I tli 1 5/l RC 20$v>200 IVIZOI I I V>2021 I V>261)5/4 RC 17~(1751 11741 (1771 5/4 AC 255 (ZSO>~v>500 1215>(Y>SII)(214>>v>)et>(YI105>5/4-4 215 I 25l 1 125$)I t54>I-SO-01->~(21 5)(il 11 I tS21 CZS>I 1250)5/4-ac-tlt V15 Iv>557>I V I SSI>(VISStl Pl~Gll I I I~I)(1171)1>141>5/~AC le~C let)(1001 Cltl I I vo>eo Olail (I Vol>01)(Taco>>06)(I-VO>lot)
I-VOHOI OICU I-Vol>02 0>24)(I Vol 1 0 4)(I VOI I OS)(I Vol>07)CI YOIIOB)pUMp (I VO(I>0)(I VOII I I)HEAT'ARR>ER I ao REACTOR PSLI (0-002-1 4 I I lti I I it>>11151 50 RC lit>I 0 4 CC'G 50 AC 112 I I>51 I>tl I I ltl>APEBTtge CARD Cf W GG<o CP 0 lt<<4 REACTOR COOLANT PUMPS (ALL)Also Available Pn Aperture Card AUTH NO OATE REVISION BY CH 04 APP AUTH NO BATE Stre(AAL ACVISIOUG REVISION RK K BY CH 04 APP BATE 5/>I/~I SCALE PGOG>00 POUCO~l>OGC COGPGGU ER'HO C.S.AKAI ST.LUC I E)I 1 COOE BOUNOARIES REACTOR COOLANT SYSTEM PSL1-CB-002-2
~~<SLI G R~-)SHEET 5 OF-.REV 8 7 7 0-E-80308~~
LETDOVN LIME LOOP 161 vl Vt'Slt t)1$Vt)14 2 AC 142 n Z vv 4 I C 2 CN 145 V~4)C ZC 100 4 6 ESSI vt~01 VZ4 5 v)41 1 V~0~1 W\v 5/4 CN'lSI~raat v Z I 0 6 I v 0 DZ 0 n N v X 0 r I I Z u vv'I X u v AUZIL IAAF taav I 1 2 CN 144 Z I 144 V24 I Vtlo1 2 CM)4)n Z 4/~'S 02 04 0 I CN)44 FC 2 CN 12$S I SE Ot 0)2 CM lit vv'n Z I~41~n 0 v X vv tlla n Z 4/n S vv'2~/CONT)HUED Ovl SHEE'I 2 OUTSTOE CONTATNHENT rr va~44 va~va av~rr 44~vv vr~av n 2d TNQ'<<OE CONTAINIIENT sp 10 l IAI 4 CAN IY'Rff 0 QyV MAJCM L (I IZ 4)Mv v Y 54<vI GDI I~vv Ov Ellis)ICM.Zvt)D'X V FS F vc<Vi I vvvt Iv V I<<v~i HE.V F 1 P IAI I F)U'E 002 IO P)UCD-CCS01 V~0/I ll v 1Ã0 Tll 4)O Fa.cl4005%CII+II PET)L)L vcr I 0 t)LICSCOIMM 14 CM'gl4~l\Ivl v24t5 CONTINUEO OH SHEET 2 LIB vl 0?o()~~~vf ug u g I/EC 4 Z5 2 0 0 v v v~~~n rl n vl vv~~~0 0 0 n n n CMARSI MS LIME OOP I 5/4 CN 1$2 2 CM 146 4 I 0 n v Z u r o n 4 I n RC 1$r n 4 I Cv~uvula 6 I g.CM000 I/AICM LIMB POP.CONT SEA f)BT/L 27 Vtl)0 VZ421 v Z 4/V)41)/4 CN 10$N 10t 2 I/2-CM 10)Vtlta)/4 CM 106 b 1 Vl llvl~V vv/4 CN 10$ZC 104 2 CM 104 CMAMGE tljllt DISCNARGE FROvl PSLI Cb 00)2 CMAASIMS LIME t la 1 t 1 1 4 I 2 RC 146 4 I 0~\vv n Z 4/r o n 0 4 I)/4-CN 1$$t-CN-I~I n u Z N vv n o 0 N I 0~CM 1 lt I I a 6 Vta)4 vv I 0 NOI LES 00t 14 Saat+E A vl 1 vv Z v/~V PRESslvaltER SvfBO M TavvtL R Vl 1 tAESSORI TER SI~AM SP4 IVvt ROvv t CS 1 2e VSZ04 I 6)/6-$$-At)/6-$$4))vstol 29 I I 6 0 5/6 6 414)/6-$$-4)S Ps@29 v5206 I 6~0)/6-$$4)$6 I)/6$$416 v)200 4 5201 VSZOt vst0)C)/6$$~)5 FC)~0 I V)204)/6 SS 4lt 6 0 I VSZOS)/~$$414 6 0 I OUTSIDE 5 OLC ROOM INSIDE.<<A>A/VLE gOOM vv o'r vv VI 0 v n n n 0~4~v n'r rv rv n or xa 0 OX vv?X 0 0 P~X n 6 I?vv vr vv r va z r a 44 H 4/bv X vv vr 0 lv~4 vr X vv 4.r za or Za vv n n o", vv I n v n Vl vr 4 r Vl 4v~4 Z Wu n r vr 0 vv 4, n?~4 C~~.0+?~v XL 4)0 n 6 I vv n IOP;6 V 141 SAVVP 4 4 t 0 F 14$IP A M P 4 v 161 Savvt P 6 V Is@s4at A vv 6 4)/~SI)I 5/6 Sl)I/6 Sl)1 I/O Sl)I ps I FCV 0)IA FC S I FCv 0)10 FC S I FCV-0)IC FC S I FCV-0)ID I VOS/LOI 11)ttl I)la 6'SS I-VO)SOO ISZZI 0 0 2e I-FCV 0)IE FC~16 TESI , COMM I FCV 0)IF FC I 6 0 n'0 SAMPLING SYSTEM n n n n APERTtgm CARD Also AvaTlable On Aperture Card svo9 oeomv I-pg'UI'H NO BATE REVISION BY CH OI APP AUTH 0/Aft NO BATE IRACIMS REOAAVM GEMER4L REVISION REVISEON BY CH OA att Ol TE 5/16/Sl SCALE 0 ST.LUC IE~'I COBE BOUNOARTES CHEHICAL 2 VDIUMG CONTROLv ANO SAIIPLTHG SYSTEMS PSLT CB-OOS-1 (SL1/R~-)SHEET I OF S I=EV 8 7 7 0-E-8 0 3 0 9
CO CN)Sl Vt)SS ttl<<tat Vt)tl/t CN Slt Vt)50 Z~I V25~0 Ia Ia I c 500 2 C 507 II ll~II I n O n X El Vt)44 tl cital PC D)sr Vt)54 5/0 SS 410 PCV<<20IP O n VI O n Z El H n n IV El n O n Z Il I D 0 V Vtet)n~0 0 Z Vte<<SQ (vt)44~TC ttta I/2 CN 504 2 CN)ol 5/I CN 51~V<<Slr I X I N TC\ttt 0 D 0 Vtett t n Y2445 I/2 N 04 ID LE'TOOVN TIEFCVRCHRNG 4 4 D O A~Ye~)ES Z V~TI QVN Cv tl lot vt)lt 2 CN 142 2 CN 500 FC 5/4 CN 17)-CN 515 I-I Ce o n~~V02000 vt Pu lv Vt)ll 5)<<+53 5/4 CH 171 Ioo D E.VC 2110 5/I CN ltl D v<<01 4 O tt tt PC Vt)~I I a C 0~X El 0 I 0 O 0 10<<I I/I CN 175 V<<01 4 vtel)0 D n n el H Ite CONTINUEO FRON SHEET I 4RJTH NO 04TE'T OA APP REVISION Vt)SI vt))t I/2 CN Sol I/2 CN 50l I/2 CN 500 I n/2 CN 511 I C 50)n Vt))t 5/4 CN tl)F'B 4PEm'ORE CARD 10 5 CH 50)v)CH So)v vt)lt veer)vteta CN Soe vta)5 Pcvt<<OIO vt)40 vt)~l I Ill V Aha Available Qn Aperture Card El I I CN 540 vtS20'Z El El%73>Z Vt~~LJ vtet~Vte)CN 507 5 CH tll Yt)tt 0~I~4 n v2574 (v 2 I 0 a~(vt)0~5 PGII CO GGC'I (VtSSV~VI VI n X V n Ytlot~Oi vt.Er vt)t Z El n vtao)Vt Ol Vt)0)CH373'Z V 1554 S.CN.W Ho~Vtl0~5/E CH-425 5 CH tll n V<<401 Vt)71 4/II Avt P II'CO Coeds 5/4 CN 5)t 5-CN 507 0/I CN ttt 5 CH 50)D D I/2 CN 140 V V<<042 I/2 CH ICE I/2-CN 142 IvE<<IS P Y//Y Y<<045 V V204~5 CN$10 5 CN Stt CH Sto I/2 CH-S2$I/2 CN-524 I/2 CH 527 Vt)it Vt)45 vtlor~PA Q~AI M~X~NAN5 A~Oa C~AI ON I JX~IERS~ICR
't Tgv~g~Sl 0 GOO~AT tie I CABN~XN A~HA Ital<<Ial 3(N 3IE tt I ttl~I/2-CH-501 o n El n n Z El tl I ttaa II 5 CN 425 JE N X~l CN 521 I/2 CH 525 I I/2-CH-522 Vt)45 Vt)44 Y2400)CH 42t I/2 CH S24 I II/2 CN ttl I/2 CH 527 I I/2 CN t21 o n n El n X El n vt)t4~II~I V 0 go V vt)rt 0 n tt I+C~u n Vtrt vt)tt (vOtOI)I l)tt1 X El Z El~I n n~X X V~N n'7 n n Iv A X El A n n 0 Z vt)re I 5 C-til n V25~t vt)te I~p n 0 O V Z V VI O X El A~I A X EI n X El 5-CH 507 5 CN-505 It EA)-CH 505~7'N STRAINER 5 2100 Vt~IS V2)02 vive n t IJ t n Vt)TS Y2452 I CH'545 X~OUR I I I I I I~IER I HO i+0 vtalt X El Trito)/0 ss 40t Vt02<<Y O n n V VI VI n VI VI n al n CONTINUEO FRON SHEET SVve 09 0X3Y S-pi (SLj~R~-)SHEET 5 OF 5 RES ORT4 a/10/01 SC4I.E ST LUCIE~I COBE BOUNORRIES CHEtllC4L 4 VOIUISE CONTROLS RNO SRNPLING STSTEHS PSLI-CB-00)-I PL ER NO 8 7 7 0-E-8 0 3 0 9 I I=l~A/4 ICD NO 04TE<<RACING RCOAAVN, GCNKRAL RCVISIOH PB REVISION CH OA APP BT RUT C,S RCNI
U,h CONTINUEO ON SHEET~~~/US CH tll~~~o I~~~~CN Pi~~~~~~~~~~~~~~~~~~~~~~~~~~EI 0 V~~I vteoe 5/4 CH 204 v I tp V~vtel I I I'bet 5/4 CH 201 C/I~(.Ctl-Aft C//Art VVVI IA(Aft'.CUI APS~~~~~v21lo A CH tSC e I YAMA~4 I/2 N 5$0 111 t too VCIS4 4 A YANA I/t c 504 I CUI'AII VEIrr I/-O/At V2858 vvo 1 Sl 1 fAI tA.CH V tb tl vtltl I CHt~I/2 CN 41~~~~U~U CH 5~I Vtltt~I/t CH Set Ls 4 CH Sel n~~Z UU n~4 CN tie 0~I V215'I/2 CN 51'-CHo9TO 5 CH tlo I vt1 el CH Slo~~~(vzi.Q'N V2/rrOU V2//V.CUV-UA15
~~~Util l I Vtl 1 CH 403~~~vt1 52 CH n Vtlel LO 3<A CIC~~f41~~~~~~250t 5/4 CH 10 Vtell fetal~~vtspe~vt tot LO~~Vtlvl~1 ttll QV2I 5~eo I~~et Vtltl v2 lot~r I I/2 CH'Soe I/2 CN Apt I I 0 I~~CN tll I$$'tt.iQ vtlol~3.cR./4~vtlS~44~A09 0 Q~4 UJ~UU~QR~CA JQ U~IEUP~U ISCC IUSLI Ce 004 5 fOR PUNA SCIAILSI~I ttll V 55US P 0 I S-CN.A C4 CV 2141~~~~~fC CN.AIor 0 0 I~~~~~/2-/.'//-A./
~~~~~~~~~Z CU n Util'I vtloo~~~~IS LVCSOCS Q.CH Aog~~10~~'u VZ/4;O/Ct OU~~~~2/TI v o~~2/I c//Af/5~~~~~~~~~~~~~~~~~~CH 414 el~~S-CN-oil I SS 2-2U 4 ,(U I I/2 CH 510.I/2 CNA 5-CH.$55~~vtooo~~~~~~~~~~~~~~v v~~o~~~~V~~~~~~~~~~\~~~V~~~o, (cf/r//2~~C&gpt~~g,t g/gttg~~~~~~~PU~~~~~/-/://%O V?~10 I v?SOS 5/4 C>>141 V2194 F I c 0 5/4 CN l?t v242$LO Vtltl 5 CH 505~V2~11 2.cH ass I Egg p I I/2 CH tte[oOcj c voto~(lli'D LO Ic(74 PSLI CS 004'2 Sl$00 VO22OS iG27)C 0 C at<ALCto CH 550 C 0 V?070 D 5/4 CH 190 C D Vteat V 5/4 CH 1st C D~v?071+0 K/4 CH 191 5/1 CH 5tt CA N~N 4~AOI~P I 0 I[oOcj n Z Ll Y?04$iv n 0 Z Ll I CH 509 Y Z al 5/4 CH 10 I-'VOLUME CONTROL TAttr, I~CN'594 S CN'105~a 1 V?115 n Za V~~~~IY CH 505 LY I Nt7~tw V D Vttlt~?C OS 5/4 CH$M 5/4 CH 174~CH 51~v?$24 QOCJ 2114 1 CN-540 I/2 CN Stl V?117 I CN Sto C~OC 01~~~~C>>$$4 p.CN 57C~~VII 15 C 0 C D~t~II FAI vta 9~4 CH lae Z al Yl Y iv I/2 CN Otter Vn Vtti~Eb I/2 CH Ill CH 595 I/2 CH 944 V?500 Y?501 C>>$11 Vtl 10 Vtl?$~Qe Jl~~1 CN 540 5 CN til~I-'"-V219~5 CN SS5/I CH 195 Avl 40~CA l~lP I 1D~v?057 B-0 C v20)t I CH ltS FAl vt501 I/2 CN 90$~~~~~~~~~V2075 Et Y C C 0 I 5 CN$0$CN 102 Vtt)S C D ol cia o C v?054 QO Y v?071 I CM 999 HYDROSTATIC 1051 PLYLP CONN Scl leal n n Z Ll ll Pie tlta V?457 I/2 CH 522 Vt)14 n n jii3e SIAOII.IEER I/2 CH 555 V251~IY ttla Y vta)0 l Q>>av I/2 CN 321 VtSlt T v~ie 4 OLSLT STAEALITER
~~'I/2 CN 510 vt)tO 0 0 Yt)I I*--'-T j v?Itt I 0</3-CN tse Pis ttta I V245t I/t CH Sto r/4 CN 34~0 I v?l t cb Y(I EIISI 4W 505 STAG)UTER I/t CN SLSY vtlt5 f il~~~NIDROSIAYC TEST P.VP CLYNCCTIOLI~~
~~~0 PULSA'T ION D424PA I n tv 0 tilt hc Ssi CN 55 V2524 I I/2 CH 115 CN 11'5 I--2 C 157 2 CH 137 v?559 SYO21$2 IN)5/4 CH 114 CHARGING I C>>115 PUMP I R I/t-CN-910~~
~PULSATION CAI/icLER 3 2 CH 550 v?525 N N LI~I I/t CH 117 Y?550 V2110 Z CN~57~v/I(414).~/1)LI V?510 I C2G$C n R~TY42 NO zT.....(NI Ll I ARG I NG PUMPS I SEE PSLI Ce 004 5 FOR Pl)NP DETAILS 7 N~01 Yt'$$2 ilt CH 542%2 C>>$4)tP Lla 0 till hcu.3$$PULSRTION~P)>>)Y?521 I/I/2 CM Itl CN ltS CN 101 I YD2134 (1142)feeil 2 CN 101 P CHRRG N PU)IP 1C 0 I v?SSS 0 Y?194 5 CN SS5 I?$)ja CN I Vt554 J I-VO213'I ona)SROI.AES~t.~~<,>>(Ui)0 CII A14 saotl22 (02U 7 2Cs Mt CN lie l IYO'ZISS (1141)CH 154 2 CN 154~CY AG I Vt)57 PUMP I B 5/4-CH-i?O e'I ree~l I 0121)~SI I.V021$1 0 0 I D (I I 24)f I~SV02114 Yt521~nl~I I/2 CN$$0 V?1 1 CONTINUEO FRON SHEET I Il LI IV I I/2 CH 550~LC(0 D I V2100 A/so Agent)NMy y~>PSJftg E'6 Cps SVO'9 09 0 8 V 2-'5g RUTH DATE REVISION BY CH DA PPP AUTH NO 4/0 IRACiHS RE044VN, OEAER4L REV1$20H REVISION~DATE HN BY DATE 5/ie SCALE CH DR APP (QP[1 PR RRS CH ER NO C,S AENI ST.LUCIE UNIT~l CODE BOUNDARIES CHEHICAL I VOLVLAE COi(TROL RND SR)1PLING SYSTEHS PSLI-CB-003-2 (SL1.R.-)!SHEET 4 OF G REV 8 7 7 0-E-80309 I f, 4g
~v a a~a a~a a~a a~a a~a a~a a~a a I I I I Z OI OI cs r r I C DI Cr 4/I I I III OI r Ih It I I r 5 0 1 0 4I PS 44 YC V2~45 CH 545 5/4 CH 141 U,44 I 12500~I ll I 1 I r Z II n v2505 5/4 oc 142 5/4 CH 151 504 5/4 CH ISO 5/4 OC 100 OCr 141 41--Og~g rcr 141 IIOH 0 0 I VH 450 45 C Qyyg'C 14501 V450t vt502 5/4 CH 152 IICr 101 R Hr I v2501 5/4 IC IVI 5/4 CH 155 Ocr 102 R&vr5 I 2 VCR 44 IV 2 II n S/4 CH 14/5 0 0 vtSOr IV 2 41 n Vtlrl 0 0 I/t CH 140 AUTH NO OATS REVISION BY CH 04 AUT NO GATE GENERAL REVISIONS REVISION'I i Ik HC OVIC BY CH 04 arr GATE 5/10/GI SCALE/iaila vlviv~lllvi ca/av OR KRB ER NO CH R APPROVEO C S KENT+b'0 Avd4Qo Q@APextuxc~ST~LUCIE UNIT~I COBE BOUNOARIES CHEHICRL C VOLU446 CONTROL ANO SANPLING SYSTEHS PSLI-CB-005-5 (SL\.R,-)SHEET 5 OF 5 REV 8770-E-80309 , Sioeoeosvs 0 0
~1 ssas asa V SIS'0 II F474 I 4 3T'asia FRosa V 7 1514 0 4 05 1 vi~'3S I/t 5-~lt Sl el t Sl~1 M D LCM TINT 4 I D 114)o~0 M IDD vo~tli)4151SI~Sl 5 Sl 200 oe fa v)431 0~1 Si 5 4 V>>40 It-ST-4DSO vSO~7 I 5 Ss~1 Sl)17 aa Y)117 v)152~7 Sl 410 Q v)454 I 4 I It SIWIO vsoae 0~VLN'I LC M Os\I FOR CONTINUATIOII SEE SHEET 02 v)a)7 2 S'I OI~I sel~I 0 4 I 0 va~1 n~~N 4 I Y)OS~v)tao SI al)SHUTOOVN COOLING HEAT EXCHANGERS
~1 Isis'10 V 0)1415 si Cs Cs tvht 14 F t 1 0 I SA 0)'sa Qei v)aaa ti CS ii lasl S~-~~FROII V 07 1440 RVI R ss$1 4 Sl Sll L)/~C$40~v)057 I Sl)0th v)a)2 I YO)00~0~I 115551 10$1-420~Sl 51 lo V 07 141'5 C5 tatht le s-~-s FAON V 07 1440 Rv'I 14 CS 4 dls~e V v)tts sisl I 4 04 I R h I 5 LO.Sl m i-OIOOs sla c5 41 11'5551 jQQ0)~D oa M Po Sl 504 FA v)442 V)445 11 v)134 I~I I-si-soa V)F 41~0 M N v)ies I-sir-v ost 0 0 I l-Si-SO)V 4 0 I Y)440/i-Sl-SOO 4 I Sl-425 v)931 v)402 0 4 I I-sl-Sos Yo)00)I 152S I I n o M on 0 1~I ah 4 I o n V'I o sv 4 0 I Sl)01 4 I V)ale v)~4'n 0 y Vh 4 I FRON V 07 1440 0014 Nsh Nr ss 1 V 393O vsi~1 SI it~VO)004)05115251 fRONI V 01~sshao CONTAINME.N T 3OMt R 1 fll V)1 la Sl isi 4 h 1 5 I~I el I.SI 3$5 It'St-407 5 CS so9 8523)~St 10 NaosL Dsscroo ts I~'o~)"-~~OPS----I~P~D CONIAINshtssl
~I Waar PSRSP Se>>ha't'Sl tta Ia Sl~IS 32-413~el~3%5 10$V)tts II I)/4 52 5$-)I+4~I Y)441 0 4 I~v)tta)/4'Sl 5'54)4 5'I~ti tstst 14 4 t 4-$7)ot e~s V)tti 4 5'I)52~salt 14 sl 444 v)455!I SI)I 10 Sl il)I Isss 2 Si 2~T vssoa 2 Sl 104 Qv~)tea 2 sl toa v)454 Sl)s)/4-Si-S)I 10 Sl ilt$$)I-10 I 4 LOV PRESSURE 2 Sl 205-sol ie v)a)s v)454 I 0 a>~+.~sgEGGN vll ISO 3 v'FCA toht DCIAILS Sit tSLI Ce-Ooi ti 0~/4$$412 I Lisejg o-s fiioss INO 07-14 v)447 CONIAINRCNI 1/-Sl.oo)$104V P IA~hlo I~-~v)201 1 0 j~I 10)124~1 1)/4 Sl)S ha a)/4 Sl)41 f 4$$)-1 tslht 14 I 0 I~Sl 544~I v)tSS 0 V)it))Sl 204~I 1111 0 ei 10 V)t)t~1.1)/4 57)5 2 SI 207)/4 Sl)45)/4 Sl)SI 201--..7 1 I-el-)a, Q v)tsi V/+Cl v)asa 0 el 14 v)121)-$1-2SS ton~Pa 0)/4 Sl-)4)$$)tV I VS'115)/4 Sl)5 I 4 I HIGH PRESSURE SAFETY INJECTIl)N PUH iSEE PUHP OETAILS v)104 11~v)204 LO Pa>l-si~22 D v)tst h)to'3 1 W Sl tt)v)~05 2 Sl v)107@so N It.31.475 t Sl a)4/L 31 n I~Sl)15 N N aa Hs~Sl 100~N~i20 1 v)OS~Ti101~SOS~I 0 4 Sl 104$1 t05 3 31-203/LO V)it)3 SZ~20'I/ao v)aos~I ssh~0 v)120 V Sl)St I SI)14 4 I v)o)~~ST 420 10 SIMtt FOR CONT INUA i ION SEE SHEE'I~2 FOR CONT'INUAT ION SEE SHEET~2 AlSO AvashIhle oa Aperture@~h AUTH NO GATE REVISION CH OR Att AUTH NO DATE REVISION BY CH ssfsajSO TRACING REORAVN.GENERAL REVISION PS C OR DATE S-18 Bl SCALE OR OGB ER NO APPROVEO vsoasaa povsa 4 alias copaav C.S.KENT ST.LUCIE UNIT NAPPE BPUNOARIES SAFETY INJECTION ANO SHUTOOVN COOLING SYSTEIIS PSLI-CB-Ooo-l (SLIT RE-)SHEET I OF 4 REV 8770-E-80310 C F=I~SV09090SVR pg 1~C IC~~~t
~(0 FOR CONTINUATIOH SEE SHEET el FOR CONTINUR1IOH SEE SHEET~I FOR CONTINUATION SEE SHEET al 00 V03')10 sr 2 Sl 10$lt.SS CSO 4 Sl Ioss Vse~'5 vSISV Y)140 C Sl 105 LC 0 I Sl~00$1 114 Y)154 LC v)040 0 y 0 I 1 Sl)10 0 C LC 2.Si.soo v)f 41 v)iit I$1 404 D C V)10)vSOtS 0 c)/I Sl)25 I Sl 10)0 C I/2 Sl 40<<Vol)'5~I 15251)st 0 I Sl 101 I 5 1 FRDN I Vol)511 15251$1 104 CON141<<r)CNI
'1~1 C 05 0-$1 172 0-$1 472 lt Si CDT 4 s;.415 n\1 n I SI)I V)04t 00 g FC 2$1 100 0 D LC V)111 I$1 111<<CvS457 I SI 115 V)1'51 lo Sl 411 12 SI 101 Co<<141<<)IC Nl St44Y NC40 R 0 P S-CS-0-s It 51 415 n r n M~4)V n v)es s2 Sl-400 Fcvs)04 V)45'/2$1 44 8 I~)S)44 4 O o 8 I~V n vr s Vr St Sl Ill-$1-400 a~s))I~I$1 511 V)015 FO 81 0 OR DR 8 I 0 I ssv 0)2$1 520 V)elt SI 140 Sl\42 st S'1 4YI$1 145 vo3)io 5-$1)11 I VO lo I Sstt)Lf$1$55 I$1 52 v)el)54)t 8 D 8 DQ$1 541 I/2 SI 14 I eo V)117~St 105 I$1 l)4q V)015 fv~V~VV VI~ra V)F 14)~I 7 Sl 104 y o 0 I I Sl)20 00)/I Sl Ssl VSOti OR Sl)01 v)014 SI tlt Sl 210 tl Q V)4'54 vsiss F41 SI 105 I O'L.)3/4 5/1-st 55~vSOtl-$1-sot 8 I Iv)0 1 1 8 0 I 1 Sl 4 Sl 120)/I$1 510 vsott OR SI 10~3 SI 209~)/4$1 5)t vstte I S I OR 0 v)112 4.$1.210 S)44 S)44 Q Sl tlo V)455 4 SI 21)I/2 SI 22 S 55tH~Sl t21 IS V)451 4-$1 21)vSIOO)/4-$'I 211 SI 215 5/I SI))2 V)too DR$1 2)4 0 I-SI-)21 g I-Sl-t)5 e I Fat I e v)elf 0$1 120 0 I 0 Sl 0 I 4 St-tto)/I Sl)5)v)tos 82-St-s~5/1-$1-555 V)405 1st D)/I St-)SI vstot OR 0 I-SI)4 Q Ittoi 01~I 3 5I.G53 b 04'$5854 DR DL 0 1.0 SI 141~)~s 3 Si 205~S)IS I)4 Sl Iot v)I 1 1 s)lt I I V)112 15 rf 4$1-IOt)1lt ts 0~IS n-St-tst DR 4022 0 4 vs)11 4-$1-)tt I I 4 HCV)415 8 I 0 51 240 0 V)021 5 Sl 110 5/I$1 11 0 C a I 0$1 250 0 V 5'I 4 5 I Sl 115 vSOOS r 0 Is/I SI 014 v)115 4 0 C I$1 052 VO)O SO I~01)I VO 005 15251 I I s)is t-Sl 521 I p rr~5'so I 5" 113 faOH P N, 41 FS<<~0 I 8 I HCV)4)4r r i ts ts~s~5/I SI 11$0-05 Sl 140 2-51 12 (VV51~5 vss~4)/1-$1-0'14$1 O'13 J r 4 S t Ii (HCveisl~I)$1 1)1 2-$1 271 2 Sl 14/4$1 241 ('Sl 142)tl~tl 0 I a ff S)tt I/2 Sl 4)4-$1-~47 I YS)24 8 a 8 Si Sit.v)OOS/rs-51 1st I-SI 2)5 10 PCNC 51 c~s 4 HCV)its 0'I 0 Sl 1st r/Da v)010 0/I-S-011 I 4 VS124 Sl 241 v)121 I Sl 242 0 I 0 V)024 Sl I)t~V~en!2"SI t)09 H V)4 Ioes" r 11)/I Sl 114 V)122 I I)~f S))s I s))s)/I$1 114 I$0 0)5 SI 1st V))25)/I Sl 011 ts t Sl 14)vs)25~1~tat el Sl 21 2 SI 1st 0 0 I f4 5/0 SSI V)105~I 11~HC V 5 4 2 1 v)105 I~$1~212 1.st 515 at)D 8 I A$1 1st~1 5'I CSI~v)440)O~SI.Cto Faor~PCHC I~'W)fl PSL~)=8-001-g 5/I St&40 1.$'I Sot~0 DR Vstt)0 SI~20 S 1 vo)000 15211 I 5 SI-IO)/vsets v)015 I 8/.I Sl tlt[eeg SI~Ot Sl 010 Sc 2.51 514-)/4 5 15 Ysttl'Hv<<)S'SA 3.CN-953M Qt 0 I 0 lo~St 412 tao<<PC<<g, 10 I'$1 eos 0 Sl-Itt 8 I I<<v 0)~0$1 005)/4 Sl tl 5/1-$1-214/rs'St I~0$!ff r SS)t 4-51 145 V)100 vseto e+I I 8~vs~0~I 14 0 02 0 I$1 2)t 8 4 v)s 54 vse~5 ts G 51-10/f 4)S a av Js/I I I YS)5)AI-St-145 1-$1-24)HCY)455 I:.C-SI.HI/Aors PL<<A)o<<r SI 1st~it Sl tio 1-$1-24 Rs)s Psc I'CO oo fs sse I;.i I\!YS)52 I/2 Sl 4)0!t v)052 HCV)451~)4 I 8 0 v)~Ss I$0 0)Sl 1)0/I Sl 010 I A 0 1 I jI)NI~I I s)1))/I Sl 115 S)-'5ViS2'.-5/I-$1-ese t Sl 14 I CH NC IR: CIRCE 2-$2SI I)v)s)5 fs SS 2$1 t Sl)O~0 I fs SNt St~441V set 12 I (V~4 1 I-;I!!el 4 11 I)HCV)451 Sl 215 Sl 24t el 0 f41 Vsett FP Si)CI)8 a vs)11 ts I I et vsost D I 4 I 245 I Sl 444 I-Sl 245 I 8 D Vs~51<<Cv)414 A rrf v)415 I e 0~Sl~1 I Vstto I Sl 24 YSOSI s-sl-ssl)pi--est I v)115 5/I$1 11 I r S)st 8 I I I~)/I Sl 111 55115 fs I un vs)~4 H/I 0'I tst tl ns 2$1 15~2 SI 11 (Vol 45 I (S)')~~IIO AVa jfgwg-es~>>I;t TIP'.Q+~/-SI.IIO I 0~Pa~+~P~)l)~I et~1)FAt v)050 F4 tl<<Cv)411 2 Sl tlat-~/I Sl 210 I 0 DR 0 svoeoeo)VI
-3/.AUTH NO GATE REVISION BY CH OA aPP 4U'TH NO GATE TR4CING REORAVN.GENEAAL REVELS!ON SO REVISION BY CH 02 APP GATE SCALE@@~L OR OGB ER NO CH 4PPAOVEO C S tENT ST.LUC I E UNIT tt 1 COOE BOUNOARIES SRFETY INJECTION AHO SHUTOOVN COOLING SYSTEtlS PSLI CB 004 I (SL1/R/-)SHEET 2 OF 4 REV 8 7 7 0-E:-8 0 3 I 0 C F=l~
D C 2 2 O 0 D m m C la 0 Yl P ZN 44 0 Zn Ta Z n nz Zn Z Ta Z~C I I PC v)ias$1 111/1 SNS C V 441/2 St~10 I/2$1~10 V$1 504 N 4 4 t$1~4 V)\44 Y~))as C 0 D n Z 0)D I 2 Z 0 0 D m 0 D D C 2 m C 0)0 Z 0)m Z m D D r 5)m C V)0 no Zn D D 51 N 4 O~1 Ta 0)1 SS)t~1)1)I I S I 455 0 V 41 D 0 0 v)~4 V 0 I It SI 411 5/4 5 I tt5 V)41t E u 4 V)1)t I/2 Sl~S~4 VT a~'5'I iss S)~1)~4~/1 Y N PQN I SI i)i I Sl ls)V I I/2 C 0 V I~Ce I S)>t I 52 i))V)411 V 214 Sl l5)C I 5/4 Sl 2~V)~1-52-451 A V 41 4~'C C 0 I v)ett V 5/i$1 255 PC/)/4$1 ttt D 12$2 45 0 V)215~II I 4 I 4-2 t VS 0 V 5/4~5 It SI lSt 5/4$1 515 t SI IOI 4 V)4)~Il II~)~$44P I$0.05 10 5/4$2 2)t~1 SD~)/l$5 0 4 v)I 1 I 0 a lt Sl li a~I I SI 125 I Sl 125 V Ii v)211 LOOP A 1 T V V~01 I 4 C I 4 51)1$~vie>p'V v)1 5/1$2 2SO I$2 ttei I 4~1 pa S)II))tt S)t)V)12t I/2 51 441 (I)/4$1 tt v)t)t I 0 C 4u C C 0 I v)t)i 5/4 Sl tt1 C 411>>NCv)421 v)1 4 N u C 4 v)te I v)tt)I SI 150 V V~5 V It Sl 414)/4$1 tts v)42 I'52 I Sl 4)0 I I llt S)t)+A~PI NPJJI}N v 2t C 4 D I I S)tl v I 5 lit 0 0 V)tti I SANP$1 ill SI 441 I 5/0 sl 51 It SI 102 e t v ata/4 Sl tti 0 12 SI~5 v)22S 5 F 50 5 IA I Sl t)i L V)~~~ta pt f9'Vi47)t~I S)t~0 4/4$}tl22-~0---4 I I j~j-V)tt SI Slt at LO P lal V It SI I~~4 II 1$D m 01 41 0)n D I Pl 5/4 Sl it)V~5 V ail I 1 l1 I Sl SI 2~2 (D FAI~v~0 a I I I Vl v~et I RC Iit LO~14 A N 4~I v)itt4 I 0 FAI v)4SI$2 250 2$xeeal a0 N ii u I VS~at I 4 u v)452 4~~FA 0 1-$5-224 V I 0 FAI 5/i$2 tatL V D 004 10 f 4 2 SIC 141 V V~4 5/~$1 tie v)t0)I SI 125 I 51 0 v)104 0 12 Rc ISI Z o D'll D 0 m 0 n o 2 TT Ta~1)1)I)1)I)N)I 5 I 4 i\v 0/2 Sl 100)Ii 51>I~1 S)a)Snt Ta I)~I v)til (vVoia I$145~I/t SI~11 5/~51 tt v~1 V 4~2 Pl 2 D~Z 0 14 2 0)I aanN DNDO~v)0 m 0 rommr CR 0 I ZCIDn n 0 os n w 0 m~OZZ OOC 00 ormDz~'z I ZW Pt 0 N Pl 0 aa~ii Z 14 m 2 ii (X)O I[j.Z 4 zn Z N 4 nn nc%4 4~'nz Z4 zn~I Z Z V o O 4'V u V u~~4 u V~V)1 I/2 SI ii N 4 V t)V 4 I I SI 414 SS)S~AY~IV N~IN I~St 11 lie)SI~i)I Sl 44t V/I~5)il2 VS 4 V 0 0 I SI 10)/~$2 gt v)t)0 C 0 I 4 U I PC Yc t V)/i Sl ttl)/4 Sl tte lt Sl 44 v 5 glol QL I$1 iil 5/~51)14 12 SI 10)~v)4~41a I~I H V I Sl 120 5/4 St ts)0 V I)0 4 V)~va))/4 Sl 2)5/a Sl I tl It Sl ISO 4 51 111 0 D 4 V I I 25~V V I I a 0 1 5 120 1 I 04 Sq'09 09 0~I 50 0)II/~51 t)1)))~~vt$4 I0~~)v~i&I Sl t)1 lt RC IS2 E N V 111 I/2 SI 451 N~'4~VS~~I I u u C I A YC N V)~~~4 5/i 5I 25 0~V)t 5 5/~$1 2~~vatO~I$2 45$Dal~4/lv~NI~N 1~S)at V I~SI 2~1)/\SI 214 It Sl iS 0 D~t V Ii~v VS~I I$1 2~)I Sl tii I 51 v)~I~0 V)~)4 V t/4 Sl tst$1 II~I SI i)1 I 5 i)4 v)tat 5 0 I I)~I I Sl i)1 T tii I$1 455 I)I~SI$1 It s)2 100~I v)la~IDRAIN SANS F Q l 5/4 Sl 255 i v)~15 I Sl 2~I 54 52 lit I I~g~RC-I)$t Sl 151'Z D~Om C
~~\la~1 1 NVCNROON Vfr(1 ltr VITN FILIER O O 1 O 1 O'LC 1<C 139 I.YO)22$<2$I I<CS<2'VDTZ<SOI23)~~
~~/4 CC/LiC5/4 CC/40 7$4~)W Ts CS.(o Ll Ll LV L1~1 41~01 I VO)>tt (14tl)I-VO)l)4i I-Vo)lt 1424>(>424>&I Y07177<1424)~~
~~LC LO 0 C CC VOT<02(140)4)~~
CN t)0 Yo)105>><ot)-VOT>0<<I<Ot>'10 4ND FRDN NLI CS 005 2 75.AI ERvURIE CARD STRAINER RCfUKLINS YATCR TANK n n~r n O n n rr O r IO n n~r O O n n O O n~r n n rr n O 4 SI 414 FAD)i FCLI CS ool I~$1 lls FAD<<FSL>CS ool I Lr 00 lnr T.SROl.'2!ICS14<$t 2'VCNT 0 I I V072551'132)l 5 tt I Vo)25t 1 (1547>3 CC 14 2 5<O 0 0 I Y07251 1 (Isi)I 3 2'C)7 lol 0 I 0 5/4 Ct~st 0 5/4 YKNT~I I YO)25 (1324)NoON STDAACC TANK>A Isr120 SAL I VO)254<IMS)CC~0 I Vo)255 (ISZ51~)N 1 cc ro O I Vo)2721150))
~~5 CC 1 I Vo)24)>>sit)~~
~~LO 0 I V0727>>150))~~
~~1 I Yo)270>>sit)~~
~~LO 0 I YOT(04>>41'I)~~
~~Zi CC CC 45 o I,'I I Vo)105<1425) 1~1~1~~1~I Yo)200(1525)~~
~~Vo)20)(1525)Ir DR D 0 Ii DA I~0 I Vo)240(150)l CC tl LO 0 Vo)242(150))~~
I I Ct Lo I I-V07247(>5<5>J T Volto401$43~Ct 10 1 c'3<DS I V0724$115251 11~1~4 I Y07>st<1424)I Vo)154 (<015)Lo I 5 CC<2 5 CC 12 I VO)ltl (1415)LO I Vo)12$(14t4)~1 0'I~~11~1<~I~1 I~$~1 1 4 I Vo)150<14tl>I Yo)140 (IM4)$$-07<L I 12 Ct 1 I<To)137 0 CONTATNNENT r<.I sts)o sPRAY PUNPs I DA~1 1 I Vo)154 I IMl)1 I1 1<VO)125 1 (Iszs)I~I Yo)124<14241 I 0 0 1<41 1 I 12 Ct Also Avsilabh'n
'=~T r hn.e Ch&l-t Ct ll lro~1 1 I'$1 CCNIAINNCNT ttAAY FVNF ACC IRCVLA110r CAFCTY INJCCT ION A<CIA NK4DER TO FSLI CS Dolt>-$$-00 It Ct)I Y Yo)144 (1$2$)CONTAINNCNT CFRAY Yo)liM 1554)I-VOT<ii>>525)I DR I 2 CC 0$'I Vo)14'S<1514) rt<tt 114~1 1 I<2$1 411 To FCL<CS ool I 0 I 0 I VOT<55>>ll))
~~I Yo(t4>>lt)I I Yo)lst(l>271 1 CC~1 CC 54 Col<)A>rrfr<~~
~~CFRAY FUNF RECIRCULATION~~
>25)24 1 V I VO)>51 (lstsl 12$1 414 SAFETY INJECTION ACC<A NCADCR 10 NLI CS 004 I CCATAI ID<CRT CtAAT TO FCLI CS 004 I I Yo)ltt(15541 I Yo)lt0 0 (Ists)I DA I YO)150(1$>l)rt$0 I 14't 4 14 Ct)CAf KIT INJKC110N SUE)ION READER fAotl FSLI CS Ool I CA/E1V INJECTIDN SUCTION NK4DKA fAON tSLI CS ool I-VO)li><l>47)
~~I-vo(22<>>27>L I YO)142(1127)~~
I I I I I I FOR FIFINS 0 INSTA<rrfr)4TION IN TNIC AAE4 CEf DETAIL Ai (FCLI CS 00$2)5 10 1>~1 1 C.l I I I I I I I I Lt F 1&I Vo 244 115251 Cl CSIOS CC I 24 Ct 2 SAFCI'1 INJECT>Dr I Vo)'lto(14401 CUC'I>or NC4DEA 10 NL>CS ool I SAFETY 11<JKC)IDN I Yo)I 1tl>440)COCTION NKAOKA 10 FCL<CS ool I I Yo)210 I 0<IMS I 0 1 DR I V07247<1327) 2'DR I 3 CS.<20 I VCS L)S I Vo)2l0(l Ot)D ts t It LC I'VOII<)O<<<
~~1/'Ct<55 I VO)tlt(>525)~~
~~I Yo)240(13241 1<11!CS<I~n<~0 REACTOR AUX BLDG N~)W 0~CONN I 1-CS 12 I 1 CC<20 I Vo)25>>13221 I DA I VS)2M(l t)I'FLUCN I Vo L 0 7255((327)~~
~1<0.I Yo)2$0(1324)F N C I 2 C5 tl~1~5 tt 2 5 ti-5/4 Ct 150 I V07254<1324) 5/4'ENT s>090902'Fg-zg~AUTH NO CATE REVISTON CH AUTH NO r2hv GENERAL REVISION REV<STOH GATE GY PATE SiISIS>SCALE SC CH orl ORN.to)rl~lor ER NO CH R APPROVEO C S KENT Att/Lnraa rrrnr<<ll ST-LUCIE UNIT<<I CODE BOUNDAR I ES CONTAINHENT SPRAYr TOOTNE RE<<OVAL ANO REFUELING VATER SYSTEHS PSLT-CB OOS-I (PHR/N/-)SHEET I OF Z REV 8770-E-80311 p>Y t 0 Ca O I~0 I 5/4 CS 15 Ii CS IS I Vo)tst(istil I VOltss(1324)
~~CS 101 I V0725t(1324)~~
PI 107240(1324)Z~I Z Z aa~a za Da Ir Ia I Z Z~an~-a ga cr CONCRETE SNIELO~V)LOINS 14 C$14 4 C I)~($55 4 CS 4 CS 1 4 CS 20 CO 55 IO SPAAY HOZZLKS CO 54 15 SPRAY NOZZLES CO 5~54 StaAY NOZZLKS-4-0$-so 50 staaY HozZLE5 41~I~41~I 0 41~I 1 41 e-)0 O I 4'S ts C$-2~4 C 55 5PAAY NOZZLES CO ti 55 SPRAY HOZZLKS I Yo)242(1324)
~~I Y072411)324)~~
~~I I CS 100 5/4 I 5/4 CS~5 OETA IL A" ME PSL-I-CI3-005-1 Ii CS~IO C NT4 NN NT PRAY I I V07244(13241 I V07245(1324)~~
~~/4 C Is n O~I~I)E-TOT (SZ((5t5)I-V07)57<(525)~~
~~Lr UliJ LC VI CV CA I O I 0~I n n o I~I n D n I O I~~I~0 I 0 I Vo)lst()stsl I Vo)141(15141~~
~~-$)404 LO~3 CS~LC ZY072070$0$1 ICC I I Fo Lo 55B I It CS I I ICC I I Jr 01.10 0 0 I Vo)145(lsts)~~
~\~n n O A 0 I 0 I 04/I al n ca D I OA n n~I n~I o n~4 n CC O O'$-21 Ca O~I 00 1 CS 54 I Vo)110(14011 HINSEO CLOSORE PLAIE (TYPI Ii CS-)0 AEFOELINO CAVITY I~C$10 CONTR)ANENT SPRAY Ht40KAS C)7~)IOIZLES FOA EACH OF TVO Nt10ERS)CO 25 41 SPRAY 4-CS 20 72 5PAAY HOZZLKS HOZZLES C)N A ICN NT tAAY I SAFETY INJECTION$111 NIC1 I SAFETY INJECTION$)ON 1~4 n n D al~I I ac Cl n D ic I II FC I 00 11~I~ac n n n lt'401 I 107144(1514'I Lo 54B LO I-LC 10)I 0 0 al~I~VALVES OY I~C al~I~LC I Vo)t04(140tl I i Ltaa TE$1 I V07(71(1525) 0 I LC I 1071701)40t)(CI I II I C lt LEAK Itsl I-YO)147(1525)
~~C$05 L(11 Ttsl I Vo)14t(15251 i0 I~0 I OR I FC 2-CS)5 C$4$~I I It CS I I Votltl('1525)~~
I Yo 1441150tl I OR 46 17 12 0 00 I I 0 0 CI'o I LC O 0)0 LC 15 C$52 CS-54 SIEEL CONTAINNENI VESSEL OLINO FLO ON ONLY OOAINO ICEFOELINS (TYP)4 C$40 I 4 CS I.3 51 a o 0 0 D DR I-i'S 44 I 24 0 50~I 24$1-$04 0 I I Vo))74(1440) 107172(1440)
~~I 2~'5 0 I 0 I I Vo)175(1525)~~
~~I-4-CS-4 0 I OA I-VOTitt(iSZS) aRo pltt NC 2~SCREEN(TYPI I 0 0 CONIAIIINKNT 5 I)CIA~lao Avagagq g>-~pPvtuve Qg AE4CTOA AJE.OLOO IC~I 1~I~I~I Vo)211((524)~~
AtaCTOI\CONTAINNfNI OLOO, al~I 4 I-Vo)2t)(15241 IC~I 1 8V09 090 SV 8-3g AUTH NO BATE REVISION BY CH 01 att AUTH I DCAge OENtICAL REVISION NO DATE REVISION PS SY CH OA APt BATE 5/(0/0)SCALE I(Calla tea(a~Ilaec coaaac C 5 RENT ST LUCIE UNIT 01 CODE BOUNOARIES CONTAIN)IENT SPRAY~IOOINE RENOVAL ANO REFUELINO VATER SYSTENS PSLI-CB-005-2 (SL1~N~-)SHEET 2 OF 2 REV 8)70-E-8031 1 1 t.I-h~~4~~
~~0, C~C$~~
II~44l FS 575~~0 0 Poo 0$3l~PLOO HEAT EXCHANGER FS 574 VIBIS O~I 4 O~I~442 I/2 FS 50 Y~I I 0 C FS 54$V Y4~IS~I~Ill~\O V 0 f42 f4204 V~4204 SS 4 IA/2 FS 504 5 FS 502~FS 504 4 FS 554~Pl~Pl VS 202 O Ia F PO P HPS ISAAC OCIAIL5 ON tSLI-CS-004 Sl~I 4 442 B-F5 542 VI BIO O 4%O f4202~FS 507 V4 02 v420$/2 FS$05~SS 4 ls-F5$05 4-FS-5$2/~v4'I0055 FS$4l B-~o V~B-C FS 540~2 FS 50I FUEL: rolj 4(8 4$885sg Q@I'Pyf':d 8'foooeosvs y0 AUTH NO DATE REVISION BY CH OA Att AUT I'l/Ila NO DATE BKNIAAL ASVISIONS REVISION SD JAS BY CH OA Att DATE I SCALE QPR P444I I4 f4444~I I 44 I COt44f APPROVED C 5 KSNI=)&~~DR LCC ER NO CH ST.LUC I E UNIT II 1 CODE BOUNDARIES FUEL POOL COOLING SYSTEM PSLI-CB-006-2 (SL1~M~-')SHEET'I OF 0 REV 8770K-80312 0
OOTSTOS CONTATNNCNT TNSTOC CONTATNNINT f4555 I 0~l 1'~l YN OST Y4114 (~vr>>ao YN 50~Y4141 0 0 (I Ii i I l I->>.O~Vaibble On Aperture g jg'P 8jIPQ PQ PSV S AUTH NO BATE REVISION BY CH OA Att AUTH NO BATE OTNTAAL ACYTSTONS REVISION BY CH OA Aoo DATE 51101~T SCALE 4444144 OOoii~41~1 CNOan OR LCC ER NO CH R APPROVEO ST.LUC IE UNIT TT I COOE BOUNDARIES WASTE GAS SYSTEM PSLT-CB-006-2 (SLI..M~-)SHEET B OF 3 REV 8770 E-80312 tg

ML17308A183: Difference between revisions

Revision as of 10:21, 6 July 2018

Text

SUMMARY

1.0 INTRODUCTION

1.4 Inspection

7.0 Appendices

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

1.0 INTRODUCTION

1.4 Inspection

2.0 DEVELOPMENT

Reference:

4.0 EVALUATION

4.3 Acceptance

4.4 Acceptance

4.4.2 Acceptance

SUMMARY

5.1 Description

5.2 Description

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

REFERENCE:

Navigation menu

Search