ML17311B322: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
 
(2 intermediate revisions by the same user not shown)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:TABLE 2.2-1 REACTOR PROTECTIVE INSTRUHEHTAT ION TRIP SETPOINT L IHITS (Wl foal FUNCTIONAL UNIT 1.TRIP GENERATION A.Process 1.Pressurizer Pressure-Iligh 2.Pressurizer Pressure-Low 3.Steam Generator Level-Low 4.Steam Generator Level-Nigh 5.Steam Generator Pressure-Low 6.Containment Pressure-Iligh 7.Reactor Coolant Flow-Low TRIP SETPOINT-2383 psia-1837 psia (2)44.2~(4)-91.0'-.(9)See~+&psia (3)-3.0 psig ALLOWABLE VALUES-2388 psia~1821 psia (2)43.7-.(4)<<91.5%(9)SRO-~psia (3)<<3.2 psig%UN aot&#xc3;~M M ao I nw oe r%..-Util: Q~oM~I QQM I aQQ.-l>%M I c)j~'I II Wl'I a~Rate b.Floor c.Band 8.Local Power Densi ty-Iligh 9.DHBR-Low B.Excore Neutron Flux 1.Vari abl e Overpower Tri p a.Rate b.Cei I ing c.Band-0.115 psi/sec (6)(7)~11.9 psid (6)(7)-10.0 psid (6)(7)-21.0 kW/ft (5)-1.30 (5)<<10.6~/min of RATED THERMAL POWER (8)<<110.0>>of RATED TNERHAL POWER (8)<<9.7-';of RATED THERMAL POWER (8)-0.118 psi/sec (6)(7)-11.7 psid(6)(7)
{{#Wiki_filter:TABLE   2.2-1 REACTOR PROTECTIVE INSTRUHEHTAT ION TRIP SETPOINT L IHITS
-10.2 psid (6)(7)-21.0 kW/ft (5)-1.30 (5)<<11.0'/min of RATED THERHAL POWER (8)<<111.0>>of RATED THERMAL POWER (8)-9.9'f RATED THERMAL POWER (8)
(
TABLE 3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES I C)m R7 C7 m m C7 C)CQ ESFA SYSTEM FUNCTIONAL UNIT I.SAFETY INJECTION (SIAS)A.Sensor/Trip Units 1.Containment Pressure-High 2.Pressurizer Pressure-Low B.ESFA System Logic C.Actuation Systems I I.CONTAINMENT ISOLATION (CIAS)A.Sensor/Trip Units 1.Containment Pressure-High 2.Pressurizer Pressure-Low B.ESFA System Logic C.Actuation Systems III.CONTAINMENT SPRAY (CSAS)A.Sensor/Trip Units Containment Pressure High-High B.ESFA System Logic C.Actuation Systems IV.MAIN STEAM LINE ISOLATION (MSIS)A.Sensor/Trip Units 1.Steam Generator Pressure-Low 2.Steam Generator Level-High 3.Containment Pressure-High 0.ESFA System Logic C.Actuation Systems TRIP SETPOINT<3.0 psig>1837 psia"'ot Applicable Not Applicable
foal Wl                 FUNCTIONAL UNIT                                   TRIP SETPOINT                ALLOWABLE VALUES
<3.0 psig>1837 psia'Not Applicable Not Applicable
: 1. TRIP GENERATION A. Process
<8.5 psig Not Applicable Not Applicable 895>~psia"'91.0X NR~'3.0 psig Not Applicable Not Applicable ALLOWABLE VALUES 5 3.2 psig>1821 psia Not Applicable Not Applicable
: 1. Pressurizer Pressure - Iligh             2383    psia                2388  psia
<3.2 ps>g>1821 psia'Not Applicable Not Applicable
: 2. Pressurizer Pressure Low               1837    psia (2)          ~ 1821  psia (2)
<8.9 psig Not Applicable Not Applicable QQO>m.psia"'91.5X NR()<3.2 psig Not Applicable Not Applicable TABLE 3.3-4 (Continued)
: 3. Steam Generator   Level Low               44.2~ (4)                    43.7-. (4) 91.0'-. (9)               << 91.5%
TABLE NOTATIONS (1)In MODES 3-6, value may be decreased manually, to a minimum of 100 psia, as pressurizer pressure is reduced, provided the margin between the pres-surizer pressure and this value is maintained at less than or equal to 400 psi;the setpoint shall be increased automatically as pressurizer pressure is increased until the trip setpoint is reached.Trip may be manually bypassed below 400 psia;bypass shall be automa.ically removed whenever pressurizer pressure is greater than or equal to 500 psia.(2)I of the distance between steam generator upper and lower level narrow range instrument nozzles.(3)In MOOES 3-P, value may be decreased manually as steam generator pressure is reduced, provided the margin between the steam generator pressure and this value is maintained
: 4. Steam Generator    Level    Nigh                                                (9)
~t less than or equal to 200 psi;the'setpoint shall be increased automatically as steam generator pressure is increased until the trip setpoint is reached.(4)%%u'f the distance between steam generator upper and lower level wide range instrument nozzles.PALO VERDE-UNIT l 3/4 3-27 TABLE 2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT LIMITS FUNCTIONAL UNIT 1.TRIP GENERATION A.Process 1.Pressurizer Pressure-High 2.Pressurizer Pressure-Low 3.Steam Generator Level-Low 4.Steam Generator Level-High 5.Steam Generator Pressure-Low 6.Containment Pressure-High 7.Reactor Coolant Flow-Low a.Rate b.Floor c.Band 8.Local Power Density-High 9.DNBR-Low B.Excore Neutron Flux 1.Vari abl e Overpower Tri p a.Rate b.Ceil ing c.Band TRIP SETPOINT-2383 psia-1837 psia (2)=44.2-;(4)91.0'-.(9)8SS~opsia (3)-3.0 psig-0.115 psi/sec (6)(7)~11.9 psid (6)(7)-10.0 psid (6)(7)-21.0 kW/ft (5)-1.30 (5)~10.6'./min of RATED THERMAL POWER (8)-I IO.O~of RATED THERMAL POWER (8)~9.7~of RATED THERMAL POWER (8)ALLOWABLE VALUES-2388 psia-1821 psia (2)~43.7%(4)~91.5%(9)8RO-~psia (3)~3.2 psig~0.118 psi/sec (6)(7)~11.7 psid(6)(7)
: 5. Steam Generator Pressure      Low      ~
-10.2 psid (6)(7)-21.0 kW/ft (5)-1.30 (5)-11.0'/min of RATED THERMAL POWER (8)<111.0'.of RATED THERMAL POWER (8)~9.3'f RATED'HERMAL POWER (8)
See
TABLE 3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES B.ESFA System Logic C.Actuation Systems I I.CONTAINMENT ISOLATION (CIAS)A.Sensor/Trip Units 1.Containment Pressure 2.Pressurizer Pressure B.ESFA System Logic C.Actuation Systems III.CONTAINMENT SPRAY (CSAS)A.Sensor/Trip Units Containment Pressure B.ESFA System Logic C.Actuation Systems-High-Low High-High ESFA SYSTEM FUNCTIONAL UNIT I.SAFETY INJECTION (SIAS)A.Sensor/Trip Uni ts 1.Containment Pressure-High 2.Pressurizer Pressure-Low-TRIP SETPOINT-3~0 psig~1837 psia"'ot Applicable Not Applicable
                                                                          +& psia    (3)            ~
-3.0 psig~1837 psia"'ot Applicable Not Applicable
SRO psia (3)
-8.5 psig Not Applicable Not Applicable ALLOWABLE VALUES-3'psig~1821 psia"'ot Applicable Not Applicable
Containment Pressure      Iligh            3.0 psig                   << 3.2 psig 6.
~3+2 psig-1821 psia"'ot Applicable Not Applicable
: 7. Reactor Coolant Flow  Low a  ~ Rate                                  0.115 psi/sec (6) (7)      0.118  psi/sec (6) (7)
~8.9 psig Not Applicable Not Applicable IV.HAIN STEAM LINE ISOLATION (HSIS)A.Sensor/Trip Units 1.Steam Generator Pressure-Low 2.Steam Generator Level-High 3.Containment Pressure-Hi gh B.ESFA System Logic C.Actuation Systems O'I5~~psia@-91.0'R'"-3.0 psig Not Applicable Not Applicable 89o-%k psia@4 91.5'RR~3.2 pslg Not Applicable Not Applicable FUNCTIONAL UNIT 1.TRIP GENERATION A.Process TABLE 2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT LIMITS TRIP SETPOINT ALLOWABLE VALUES 1.Pressurizer Pressure-High 2.Pressurizer Pressure-Low 3.Steam Generator Level-Low 4.Steam Generator Level-High 5.Steam Generator Pressure-Low 6.Containment Pressure-High 7.Reactor Coolant Flow-Low a.Rate b.Floor c.Band 8.Local Power Density-High 9.DNBR-Low B.Excore Neutron.Flux 1.Variable Overpower Trip a.Rate b.Cei 1 ing c.Band-2383 psia-1837 psia (2)~44.2~(4)-91.0~(9)8'ld-9R psia (3)3.0 psig-0.115 psi/sec (6)(7)~11.9 psid (6)(7)<<10.0 psid (6}(7}-21.0 kW/ft (5)-1.30 (5)<<10.6~/min of RATED THERMAL POWER (8)-110 0'.of RATED THERMAL POWER (8)-.9.7'-.of RATED THERMAL POWER (8)-2388 psia~1821 psia (2)=43.7-.(4)=91.5-.(9)SRO~~psia (3)3.2 pslg<<0.118 psi/sec (6)(7)-11.7 psid(6)(7)
                                                                      ~   11.9 psid (6)(7)          11.7  psid(6)(7)
-10.2 psid (6)(7)-21.0 kW/ft (5)-1.30 (5)~11.0~/min of RATED THERHAL POWER (8)<<111.0>of RATED THERHAL POWER (8)-9.9~a of RATED THERHAL POWER (8)  
: b. Floor
'k TABLE 3.3-4 ENGINEERED SAFETY FEATURES ACTUATION SYSTEH INSTRUMENTATION TRIP VALUES (C7 m 4J~~CrJ I Vl m C7 C)ESFA SYSTEM FUNCTIONAL UNIT I.SAFETY INJECTION (SIAS)A.Sensor/Trip Units 1.Containment Pressure-High 2.Pressurizer Pressure-Low B.ESFA System Logic C.Actuation Systems I I.CONTAINMENT ISOLATION (CIAS)A.Sensor/Trip Units 1.Containment Pressure-High 2.Pressurizer Pressure-Low B.ESFA System Logic C.Actuation Systems III.CONTAINMENT SPRAY (CSAS)A.Sensor/Trip Units Containment Pressure High-High B.ESFA System Logic C.Actuation Systems I V.HAIN STEAN LINE ISOLATION (HS IS)A.Sensor/Trip Units 1.Steam Generator Pressure-Low 2.Steam Generator Level-High 3.Containment Pressure-High B.ESFA System Logic C.Actuation Systems TRIP SETPOINT<3.0 psig>1837 psia"'ot Applicable Not Applicable s 3.0 psig~1837 psia"'ot Applicable Not Applicable s 8.5 psig Not Applicable Not Applicable 8 lS>~psia"'91.O%NR'" s 3:0 psig Not Applicable Not Applicable ALLOWABLr VALUES~3.2 psig>1821 psia"'ot Applicable Not Applicable
          % UN aot               c. Band                                -  10.0 psid (6)(7)          10.2  psid (6)(7)
~3.2 psig?: 1821 psia"'ot Applicable Not Applicable s 8.9 psig Not Applicable Not Applicable t3)~au psia"'1,5%
            &#xc3;~
NR>.3.2 psig Not Applicable Not Applicable 0~P I (~}}
M M           8. Local Power Densi ty  Iligh                21.0 kW/ft (5)              21.0 kW/ft (5) ao
: 9. DHBR  Low                                  1.30 (5)                    1.30 (5) nw I
r%  ..-
oe Util:
B. Excore Neutron Flux Q~                Vari abl e Overpower Tri p oM            1.
  ~ II aQQ.
QQM
                                                                        <<10.6~/min    of            <<11.0'/min of
  -l >%M c) j I                  a. Rate THERMAL POWER RATED (8)       THERHAL POWER RATED (8)
    ~  'I II            b. Cei I ing                            <<110.0>>    of RATED          <<111.0>>  of RATED Wl'I                                                                                              THERMAL POWER (8)
TNERHAL POWER (8)
: c. Band                                <<9.7-'; of RATED            -9.9'f      RATED THERMAL POWER (8)           THERMAL POWER (8)
 
TABLE    3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES I
C)    ESFA SYSTEM FUNCTIONAL UNIT                                TRIP SETPOINT          ALLOWABLE VALUES m    I. SAFETY INJECTION    (SIAS)
R7 C7 m          A. Sensor/Trip Units
: 1. Containment Pressure    - High          <  3.0 psig            5  3.2 psig
: 2. Pressurizer Pressure -      Low          > 1837  psia"'ot
                                                                                        > 1821 psia B. ESFA System    Logic                                  Applicable      Not Applicable C. Actuation Systems                              Not Applicable        Not Applicable II. CONTAINMENT ISOLATION    (CIAS)
A. Sensor/Trip Units
: 1. Containment Pressure    -  High          <  3.0 psig            <  3.2 ps>g
: 2. Pressurizer Pressure -       Low         > 1837    psia'      > 1821    psia' B. ESFA System   Logic                           Not Applicable        Not Applicable C. Actuation Systems                               Not Applicable        Not Applicable III.     CONTAINMENT SPRAY (CSAS)
A. Sensor/Trip Units Containment Pressure     High  - High   <  8.5 psig            <  8.9 psig B. ESFA System   Logic                             Not Applicable        Not Applicable C. Actuation Systems                               Not Applicable        Not Applicable IV. MAIN STEAM LINE ISOLATION (MSIS)
Sensor/Trip Units m
A.
1.
2.
Steam Generator Steam Generator Pressure Level   -
High Low    > ~895 psia"'
91.0X        NR~ '
QQO
: m. psia"'
91.5X NR( )
C7
: 3. Containment Pressure      High            3.0 psig             <  3.2 psig
: 0. ESFA System    Logic                            Not Applicable         Not Applicable C)        C. Actuation Systems                                Not Applicable         Not Applicable CQ
 
TABLE 3. 3-4 (Continued)
TABLE NOTATIONS (1)  In  MODES  3-6, value may be decreased manually, to a minimum of 100 psia, as  pressurizer pressure is reduced, provided the margin between the pres-surizer pressure and this value is maintained at less than or equal to 400 psi; the setpoint shall be increased automatically as pressurizer pressure is increased until the trip setpoint is reached.       Trip may be manually bypassed below 400 psia; bypass shall be automa.ically removed whenever pressurizer pressure is greater than or equal to 500 psia.
(2) Irange of the distance between instrument nozzles.
steam generator upper and lower level narrow (3) In   MOOES 3-P, value may be decreased manually as steam generator pressure is reduced, provided the margin between the steam generator pressure and this value is maintained ~t less than or equal to 200 psi; the'setpoint shall be increased automatically as steam generator pressure is increased until the trip setpoint is reached.
(4) %%u'f the distance between steam generator upper and lower level wide range instrument nozzles.
PALO VERDE   - UNIT l                   3/4 3-27
 
TABLE   2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT LIMITS FUNCTIONAL UNIT                                 TRIP SETPOINT                ALLOWABLE VALUES
: 1. TRIP GENERATION A. Process Pressurizer Pressure     High
: 1.                                           2383    psia                2388  psia
: 2. Pressurizer Pressure    Low           1837    psia (2)            1821  psia (2)
: 3. Steam Generator   Level - Low         =  44.2-; (4)                ~ 43.7% (4)
: 4. Steam Generator   Level  High             91.0'-. (9)              ~ 91.5%
(9)
: 5. Steam Generator  Pressure  Low 8SS
                                                    ~opsia        (3)            ~
8RO psia (3)
: 6. Containment Pressure    High            3.0 psig                  ~
3.2 psig
: 7. Reactor Coolant Flow    Low
: a. Rate                               0.115 psi    /sec (6)(7)  ~  0.118 psi/sec              (6) (7)
: b. Floor                              ~ 11.9   psid (6)(7)       ~ 11.7    psid(6)(7)
: c. Band                                  10.0 psid (6)(7)           10.2  psid (6)(7)
: 8. Local Power Density  High                21.0   kW/ft (5)           21.0  kW/ft (5)
: 9. DNBR  Low                                1.30 (5)                   1.30 (5)
B. Excore Neutron Flux
: 1. Vari abl e Overpower Tri p
: a. Rate                                ~10.6'./min of    RATED      -11.0'/min of               RATED THERMAL POWER     (8)       THERMAL POWER              (8)
: b. Ceil ing                            -I IO.O~ of    RATED        <111.0'. of            RATED THERMAL POWER (8)           THERMAL POWER (8)
: c. Band                                ~9.7~   of RATED            ~9.3'f      RATED'HERMAL THERMAL POWER (8)                     POWER            (8)
 
TABLE  3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES ESFA SYSTEM FUNCTIONAL UNIT TRIP SETPOINT        ALLOWABLE VALUES I. SAFETY INJECTION (SIAS)
A. Sensor/Trip Uni ts
: 1. Containment Pressure  High          3~0   psig          3'   psig
: 2. Pressurizer Pressure  Low            ~ 1837              ~ 1821 psia"'ot psia"'ot B. ESFA System  Logic                              Applicable          Applicable C. Actuation Systems                          Not Applicable      Not Applicable I I. CONTAINMENT ISOLATION (CIAS)
A. Sensor/Trip Units
: 1. Containment Pressure  High            3.0                ~ 3+2 psig                psig
: 2. Pressurizer Pressure  Low            ~ 1837                1821 psia"'ot psia"'ot B. ESFA System   Logic                             Applicable          Applicable C. Actuation Systems                           Not Applicable      Not Applicable III. CONTAINMENT SPRAY  (CSAS)
A. Sensor/Trip Units Containment Pressure High  High      8.5  psig        ~ 8.9 psig B. ESFA System Logic                         Not Applicable      Not Applicable C. Actuation Systems                           Not Applicable      Not Applicable IV. HAIN STEAM LINE ISOLATION (HSIS)
A. Sensor/Trip Units
: 1. Steam Generator Pressure     Low Steam Generator Level  High
                                                    ~ ~91.0'R'"
O'I5 psia@
89o
                                                                          %k psia@
: 2.                                                             4 91.5'RR
: 3. Containment Pressure   Hi gh          3.0                ~
psig           3.2 pslg B. ESFA System  Logic                        Not Applicable       Not Applicable C. Actuation Systems                          Not Applicable       Not Applicable
 
TABLE    2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT  LIMITS FUNCTIONAL UNIT                                TRIP SETPOINT                ALLOWABLE VALUES
: 1. TRIP GENERATION A. Process Pressurizer Pressure    High          2383    psia
: 1.                                                                        2388    psia Pressurizer Pressure    Low            1837    psia (2)          ~ 1821
: 2.                                                                                 psia (2)
: 3. Steam Generator Level  Low         ~ 44.2~                      = 43.7-. (4)
(4)
: 4. Steam Generator Level High             91.0~ (9)                = 91.5-. (9)
: 5. Steam Generator Pressure    Low 8'ld 9R psia      (3)          ~ ~SRO psia (3)
: 6. Containment Pressure  High                3.0 psig                     3.2 pslg
: 7. Reactor Coolant Flow    Low
: a. Rate                                0.115    psi/sec (6)(7)    <<0.118 psi/sec (6)(7)
: b. Floor                              ~ 11.9    psid (6)(7)        11.7   psid(6)(7)
: c. Band                               << 10.0    psid (6} (7}      - 10.2 psid (6)(7)
: 8. Local Power Density  High                21.0 kW/ft (5)            21.0    kW/ft (5)
: 9. DNBR  Low                                1.30 (5)                   1.30 (5)
B. Excore Neutron. Flux
: 1. Variable Overpower Trip
: a. Rate                                <<10.6~/min    of RATED    ~11.0~/min    of RATED THERMAL POWER      (8)     THERHAL POWER      (8)
: b. Cei 1 ing                          -110 0'. of    RATED        <<111.0>  of RATED THERMAL POWER (8)           THERHAL POWER (8)
: c. Band                                -.9.7'-. of RATED          -9.9~a  of  RATED THERMAL POWER (8)           THERHAL POWER (8)
 
'k TABLE  3.3-4 ENGINEERED SAFETY FEATURES ACTUATION SYSTEH INSTRUMENTATION TRIP VALUES ESFA SYSTEM FUNCTIONAL UNIT                              TRIP SETPOINT        ALLOWABLr VALUES I.
(         SAFETY INJECTION A.
(SIAS)
Sensor/Trip Units C7 m                                            - High
: 1. Containment Pressure                      <  3.0 psig          ~   3.2 psig
: 2. Pressurizer Pressure      Low          > 1837    psia"'ot
                                                                                    > 1821 psia"'ot B. ESFA System  Logic                                Applicable            Applicable C. Actuation Systems                              Not Applicable      Not Applicable I I. CONTAINMENT ISOLATION (CIAS)
A. Sensor/Trip Units
: 1. Containment Pressure    -  High        s 3.0 psig          ~  3.2 psig
: 2. Pressurizer Pressure -     Low          ~ 1837 psia"'ot
                                                                                    ?: 1821 psia"'ot 4J
~
  ~         B. ESFA System  Logic                                Applicable            Applicable CrJ I        C. Actuation Systems                            Not Applicable      Not Applicable Vl III. CONTAINMENT SPRAY    (CSAS)
A. Sensor/Trip Units Containment Pressure     High  - High   s 8.5 psig          s 8.9 psig B. ESFA System Logic                             Not Applicable      Not Applicable C. Actuation Systems                             Not Applicable      Not Applicable I V. HAIN STEAN LINE ISOLATION     (HS  IS) m A. Sensor/Trip Units C7
: 1. Steam Generator    Pressure   -   Low     > ~ psia"'
8 lS
                                                                                    ~  au  psia"'1,5%
t3)
C)           2. Steam Generator    Level  High             91.O% NR'"                                NR
: 3. Containment Pressure  High               s 3:0 psig          >. 3.2 psig B. ESFA System Logic                             Not Applicable      Not Applicable C. Actuation Systems                               Not Applicable      Not Applicable
 
0   ~ P I
(~}}

Latest revision as of 03:50, 4 February 2020

Proposed Tech Specs,Reducing Setpoint for MSIS & Rt on Low SG Pressure
ML17311B322
Person / Time
Site: Palo Verde  Arizona Public Service icon.png
Issue date: 12/20/1995
From:
ARIZONA PUBLIC SERVICE CO. (FORMERLY ARIZONA NUCLEAR
To:
Shared Package
ML17311B321 List:
References
NUDOCS 9512270125
Download: ML17311B322 (9)


Text

TABLE 2.2-1 REACTOR PROTECTIVE INSTRUHEHTAT ION TRIP SETPOINT L IHITS

(

foal Wl FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES

1. TRIP GENERATION A. Process
1. Pressurizer Pressure - Iligh 2383 psia 2388 psia
2. Pressurizer Pressure Low 1837 psia (2) ~ 1821 psia (2)
3. Steam Generator Level Low 44.2~ (4) 43.7-. (4) 91.0'-. (9) << 91.5%
4. Steam Generator Level Nigh (9)
5. Steam Generator Pressure Low ~

See

+& psia (3) ~

SRO psia (3)

Containment Pressure Iligh 3.0 psig << 3.2 psig 6.

7. Reactor Coolant Flow Low a ~ Rate 0.115 psi/sec (6) (7) 0.118 psi/sec (6) (7)

~ 11.9 psid (6)(7) 11.7 psid(6)(7)

b. Floor

% UN aot c. Band - 10.0 psid (6)(7) 10.2 psid (6)(7)

Ã~

M M 8. Local Power Densi ty Iligh 21.0 kW/ft (5) 21.0 kW/ft (5) ao

9. DHBR Low 1.30 (5) 1.30 (5) nw I

r% ..-

oe Util:

B. Excore Neutron Flux Q~ Vari abl e Overpower Tri p oM 1.

~ II aQQ.

QQM

<<10.6~/min of <<11.0'/min of

-l >%M c) j I a. Rate THERMAL POWER RATED (8) THERHAL POWER RATED (8)

~ 'I II b. Cei I ing <<110.0>> of RATED <<111.0>> of RATED Wl'I THERMAL POWER (8)

TNERHAL POWER (8)

c. Band <<9.7-'; of RATED -9.9'f RATED THERMAL POWER (8) THERMAL POWER (8)

TABLE 3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES I

C) ESFA SYSTEM FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES m I. SAFETY INJECTION (SIAS)

R7 C7 m A. Sensor/Trip Units

1. Containment Pressure - High < 3.0 psig 5 3.2 psig
2. Pressurizer Pressure - Low > 1837 psia"'ot

> 1821 psia B. ESFA System Logic Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable II. CONTAINMENT ISOLATION (CIAS)

A. Sensor/Trip Units

1. Containment Pressure - High < 3.0 psig < 3.2 ps>g
2. Pressurizer Pressure - Low > 1837 psia' > 1821 psia' B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable III. CONTAINMENT SPRAY (CSAS)

A. Sensor/Trip Units Containment Pressure High - High < 8.5 psig < 8.9 psig B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable IV. MAIN STEAM LINE ISOLATION (MSIS)

Sensor/Trip Units m

A.

1.

2.

Steam Generator Steam Generator Pressure Level -

High Low > ~895 psia"'

91.0X NR~ '

QQO

m. psia"'

91.5X NR( )

C7

3. Containment Pressure High 3.0 psig < 3.2 psig
0. ESFA System Logic Not Applicable Not Applicable C) C. Actuation Systems Not Applicable Not Applicable CQ

TABLE 3. 3-4 (Continued)

TABLE NOTATIONS (1) In MODES 3-6, value may be decreased manually, to a minimum of 100 psia, as pressurizer pressure is reduced, provided the margin between the pres-surizer pressure and this value is maintained at less than or equal to 400 psi; the setpoint shall be increased automatically as pressurizer pressure is increased until the trip setpoint is reached. Trip may be manually bypassed below 400 psia; bypass shall be automa.ically removed whenever pressurizer pressure is greater than or equal to 500 psia.

(2) Irange of the distance between instrument nozzles.

steam generator upper and lower level narrow (3) In MOOES 3-P, value may be decreased manually as steam generator pressure is reduced, provided the margin between the steam generator pressure and this value is maintained ~t less than or equal to 200 psi; the'setpoint shall be increased automatically as steam generator pressure is increased until the trip setpoint is reached.

(4)  %%u'f the distance between steam generator upper and lower level wide range instrument nozzles.

PALO VERDE - UNIT l 3/4 3-27

TABLE 2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT LIMITS FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES

1. TRIP GENERATION A. Process Pressurizer Pressure High
1. 2383 psia 2388 psia
2. Pressurizer Pressure Low 1837 psia (2) 1821 psia (2)
3. Steam Generator Level - Low = 44.2-; (4) ~ 43.7% (4)
4. Steam Generator Level High 91.0'-. (9) ~ 91.5%

(9)

5. Steam Generator Pressure Low 8SS

~opsia (3) ~

8RO psia (3)

6. Containment Pressure High 3.0 psig ~

3.2 psig

7. Reactor Coolant Flow Low
a. Rate 0.115 psi /sec (6)(7) ~ 0.118 psi/sec (6) (7)
b. Floor ~ 11.9 psid (6)(7) ~ 11.7 psid(6)(7)
c. Band 10.0 psid (6)(7) 10.2 psid (6)(7)
8. Local Power Density High 21.0 kW/ft (5) 21.0 kW/ft (5)
9. DNBR Low 1.30 (5) 1.30 (5)

B. Excore Neutron Flux

1. Vari abl e Overpower Tri p
a. Rate ~10.6'./min of RATED -11.0'/min of RATED THERMAL POWER (8) THERMAL POWER (8)
b. Ceil ing -I IO.O~ of RATED <111.0'. of RATED THERMAL POWER (8) THERMAL POWER (8)
c. Band ~9.7~ of RATED ~9.3'f RATED'HERMAL THERMAL POWER (8) POWER (8)

TABLE 3.3-4 ENGINEEREO SAFETY FEATURES ACTUATION SYSTEM INSTRUMENTATION TRIP VALUES ESFA SYSTEM FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES I. SAFETY INJECTION (SIAS)

A. Sensor/Trip Uni ts

1. Containment Pressure High 3~0 psig 3' psig
2. Pressurizer Pressure Low ~ 1837 ~ 1821 psia"'ot psia"'ot B. ESFA System Logic Applicable Applicable C. Actuation Systems Not Applicable Not Applicable I I. CONTAINMENT ISOLATION (CIAS)

A. Sensor/Trip Units

1. Containment Pressure High 3.0 ~ 3+2 psig psig
2. Pressurizer Pressure Low ~ 1837 1821 psia"'ot psia"'ot B. ESFA System Logic Applicable Applicable C. Actuation Systems Not Applicable Not Applicable III. CONTAINMENT SPRAY (CSAS)

A. Sensor/Trip Units Containment Pressure High High 8.5 psig ~ 8.9 psig B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable IV. HAIN STEAM LINE ISOLATION (HSIS)

A. Sensor/Trip Units

1. Steam Generator Pressure Low Steam Generator Level High

~ ~91.0'R'"

O'I5 psia@

89o

%k psia@

2. 4 91.5'RR
3. Containment Pressure Hi gh 3.0 ~

psig 3.2 pslg B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable

TABLE 2.2-1 REACTOR PROTECTIVE INSTRUMENTATION TRIP SETPOINT LIMITS FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLE VALUES

1. TRIP GENERATION A. Process Pressurizer Pressure High 2383 psia
1. 2388 psia Pressurizer Pressure Low 1837 psia (2) ~ 1821
2. psia (2)
3. Steam Generator Level Low ~ 44.2~ = 43.7-. (4)

(4)

4. Steam Generator Level High 91.0~ (9) = 91.5-. (9)
5. Steam Generator Pressure Low 8'ld 9R psia (3) ~ ~SRO psia (3)
6. Containment Pressure High 3.0 psig 3.2 pslg
7. Reactor Coolant Flow Low
a. Rate 0.115 psi/sec (6)(7) <<0.118 psi/sec (6)(7)
b. Floor ~ 11.9 psid (6)(7) 11.7 psid(6)(7)
c. Band << 10.0 psid (6} (7} - 10.2 psid (6)(7)
8. Local Power Density High 21.0 kW/ft (5) 21.0 kW/ft (5)
9. DNBR Low 1.30 (5) 1.30 (5)

B. Excore Neutron. Flux

1. Variable Overpower Trip
a. Rate <<10.6~/min of RATED ~11.0~/min of RATED THERMAL POWER (8) THERHAL POWER (8)
b. Cei 1 ing -110 0'. of RATED <<111.0> of RATED THERMAL POWER (8) THERHAL POWER (8)
c. Band -.9.7'-. of RATED -9.9~a of RATED THERMAL POWER (8) THERHAL POWER (8)

'k TABLE 3.3-4 ENGINEERED SAFETY FEATURES ACTUATION SYSTEH INSTRUMENTATION TRIP VALUES ESFA SYSTEM FUNCTIONAL UNIT TRIP SETPOINT ALLOWABLr VALUES I.

( SAFETY INJECTION A.

(SIAS)

Sensor/Trip Units C7 m - High

1. Containment Pressure < 3.0 psig ~ 3.2 psig
2. Pressurizer Pressure Low > 1837 psia"'ot

> 1821 psia"'ot B. ESFA System Logic Applicable Applicable C. Actuation Systems Not Applicable Not Applicable I I. CONTAINMENT ISOLATION (CIAS)

A. Sensor/Trip Units

1. Containment Pressure - High s 3.0 psig ~ 3.2 psig
2. Pressurizer Pressure - Low ~ 1837 psia"'ot

?: 1821 psia"'ot 4J

~

~ B. ESFA System Logic Applicable Applicable CrJ I C. Actuation Systems Not Applicable Not Applicable Vl III. CONTAINMENT SPRAY (CSAS)

A. Sensor/Trip Units Containment Pressure High - High s 8.5 psig s 8.9 psig B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable I V. HAIN STEAN LINE ISOLATION (HS IS) m A. Sensor/Trip Units C7

1. Steam Generator Pressure - Low > ~ psia"'

8 lS

~ au psia"'1,5%

t3)

C) 2. Steam Generator Level High 91.O% NR'" NR

3. Containment Pressure High s 3:0 psig >. 3.2 psig B. ESFA System Logic Not Applicable Not Applicable C. Actuation Systems Not Applicable Not Applicable

0 ~ P I

(~