ML18152B422: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:e e VIRGINIA ELECTRIC AND POWER COMPANY RICHMOND, VIRGINIA 23261 May 27, 1999 . United States Nuclear Regulatory Commission Attention: | {{#Wiki_filter:e e VIRGINIA ELECTRIC AND POWER COMPANY RICHMOND, VIRGINIA 23261 May 27, 1999 . | ||
Document Control Desk Washington, D.C. 20555 | United States Nuclear Regulatory Commission Serial No.: 99-279 Attention: Document Control Desk NL&OS/GDM RO Washington, D.C. 20555 Docket Nos.: 50-280/281 50-338/339 License Nos.: DPR-32/37 NPF-4/7 Gentlemen: | ||
VIRGINIA ELECTRIC AND POWER COMPANY SURRY AND NORTH ANNA POWER STATIONS UNITS 1 AND 2 REPORT OF EMERGENCY CORE COOLING SYSTEM (ECCS) EVALUATION MODEL CHANGES PURSUANT TO THE REQUIREMENTS OF 1OCFRS0.46 Pursuant to 1OCFR50.46(a)(3)(ii) Virginia Electric and Power Company is providing information concerning changes to the ECCS Evaluation Models and their application in existing licensing analyses. Information is also provided which quantifies the effect of these changes upon reported results for North Anna and Surry Power Stations and demonstrates continued compliance with the acceptance criteria of 1O.CFR50.46. contains excerpted portions of Westinghouse reports describing the changes to the Westinghouse ECCS Evaluation Models which are applicable to North Anna and Surry and have been implemented during calendar year 1998. | |||
Virginia Electric and Power Company is providing information concerning changes to the ECCS Evaluation Models and their application in existing licensing analyses. | Information regarding the effect of the ECCS Evaluation Model changes upon the reported LOCA analysis of record (AOR) results is provided for the North Anna and Surry Power Stations in Attachments 2 and 3, respectively. To summarize the information in Attachments 2 and 3, the calculated peak cladding temperature (PCT) for the small and large break LOCA analyses for North Anna and Surry are given below. None of these results include significant changes, based on the criterion in 1OCFR50.46(a)(3)(i). | ||
Information is also provided which quantifies the effect of these changes upon reported results for North Anna and Surry Power Stations and demonstrates continued compliance with the acceptance criteria of | North Anna Unit 1 - Small break: 1675°F North Anna Unit 1 - Large break: 2068°F North Anna Unit 2 - Small break: 1676°F North Anna Unit 2 - Large break: 2086°F (-\ oo.} | ||
Surry Units 1 and 2 - Small break: 1717°F Surry Units 1 and 2 - Large break: 2113°F We have evaluated these issues and the associated changes in the applicable licensing basis PCT results. These results demonstrate compliance with the requirements of | |||
To summarize the information in Attachments 2 and 3, the calculated peak cladding temperature (PCT) for the small and large break LOCA analyses for North Anna and Surry are given below. None of these results include significant changes, based on the criterion in | |||
North Anna Unit 1 -Small break: North Anna Unit 1 -Large break: North Anna Unit 2 -Small break: North Anna Unit 2 -Large break: Surry Units 1 and 2 -Small break: Surry Units 1 and 2 -Large break: | 1OCFR50.46(b). | ||
e e No further action is required to demonstrate compliance with 1OCFR50.46 requirements. | |||
No further action is required to demonstrate compliance with | , If you have any questions or require additional information, please contact us. | ||
: 1) Westinghouse Report of ECCS Evaluation Model Changes -North Anna Units 1 and 2 and Surry Units 1 and 2 2) Effect of ECCS Evaluation Model Changes -North Anna Units 1 and 2 3) Effect of ECCS Evaluation Model Changes -Surry Units 1 and 2 cc: Regional Administrator U. S. Nuclear Regulatory Commission Region II Atlanta Federal Center 61 Forsyth Street, SW, Suite 23 T85 Atlanta, Georgia 30303 Mr. R. A. Musser NRC Senior Resident Inspector Surry Power Station Michael J. Morgan NRC Senior Resident Inspector North Anna Power Station ATTACHMENT 1 WESTINGHOUSE REPORT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2 AND SURRY UNITS 1 AND 2 | Very truly yours, Commitments made in this letter: None Attachments: | ||
An error was discovered in the SATIMP whereby different methods of entering the input data could lead to minor differences in the resulting SATAN-VI input values, due to differences in truncation methods. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | : 1) Westinghouse Report of ECCS Evaluation Model Changes - North Anna Units 1 and 2 and Surry Units 1 and 2 | ||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F. SATAN-VI MOMENTUM FLUX LOGIC ERRORS Background An error in the SATAN-VI initialization logic caused momentum flux calculations to be skipped for the flow paths on the vessel side of the break, which is contrary to the guidelines that apply for modeling momentum flux in the 1981 EM version of SATAN-VI. | : 2) Effect of ECCS Evaluation Model Changes - North Anna Units 1 and 2 | ||
: 3) Effect of ECCS Evaluation Model Changes - Surry Units 1 and 2 cc: Regional Administrator U. S. Nuclear Regulatory Commission Region II Atlanta Federal Center 61 Forsyth Street, SW, Suite 23 T85 Atlanta, Georgia 30303 Mr. R. A. Musser NRC Senior Resident Inspector Surry Power Station Michael J. Morgan NRC Senior Resident Inspector North Anna Power Station | |||
ATTACHMENT 1 WESTINGHOUSE REPORT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2 AND SURRY UNITS 1 AND 2 | |||
SATIMP TRUNCATION ERROR e | |||
===Background=== | |||
Various methods exist for entering input data to the SATIMP code, which is used to generate the plant-specific input models for SATAN-VI. An error was discovered in the SATIMP whereby different methods of entering the input data could lead to minor differences in the resulting SATAN-VI input values, due to differences in truncation methods. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F. | |||
SATAN-VI MOMENTUM FLUX LOGIC ERRORS | |||
===Background=== | |||
An error in the SATAN-VI initialization logic caused momentum flux calculations to be skipped for the flow paths on the vessel side of the break, which is contrary to the guidelines that apply for modeling momentum flux in the 1981 EM version of SATAN-VI. | |||
This error has been corrected in the latest version of the code, along with two closely related errors in the momentum flux pressure drop calculations which were discovered during the course or the model review. These corrections were determined to be a closely related group of Non-Discretionary Changes in accordance with Section 4.1.2 of WCAP-13451. | This error has been corrected in the latest version of the code, along with two closely related errors in the momentum flux pressure drop calculations which were discovered during the course or the model review. These corrections were determined to be a closely related group of Non-Discretionary Changes in accordance with Section 4.1.2 of WCAP-13451. | ||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect Representative plant calculations showed that the corrections to the SATAN-VI momentum flux logic generally result in a small PCT benefit that is conservatively being tracked as 0°F for | Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect Representative plant calculations showed that the corrections to the SATAN-VI momentum flux logic generally result in a small PCT benefit that is conservatively being tracked as 0°F for 1OCFR50.46 reporting purposes. | ||
A minor error was discovered in the calculation of the liquid density that is used with this correlation under certain conditions. | e SATAN-VI TRANSITION BOILING LIQUID DENSITY ERROR e | ||
This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F. BASHER HEAT LINK AREA ERROR Background BASHER was issued in the 1981 Westinghouse Large Break LOCA Evaluation Model with BASH to generate the plant-specific input models for BASH. An error was discovered in the BASHER calculation of the lower plenum metal-to-fluid heat transfer area. This error only applies for plants with square holes in the lower core plate, a configuration which is atypical of Westinghouse plants. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | ===Background=== | ||
In SATAN-VI, the cladding surface heat transfer coefficient in the transition boiling regime is computed using the Westinghouse Transition Boiling Correlation. A minor error was discovered in the calculation of the liquid density that is used with this correlation under certain conditions. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F. | |||
BASHER HEAT LINK AREA ERROR | |||
===Background=== | |||
BASHER was issued in the 1981 Westinghouse Large Break LOCA Evaluation Model with BASH to generate the plant-specific input models for BASH. An error was discovered in the BASHER calculation of the lower plenum metal-to-fluid heat transfer area. This error only applies for plants with square holes in the lower core plate, a configuration which is atypical of Westinghouse plants. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect A review of existing plant analyses found no cases with square holes in the lower core plate. For a hypothetical case with square holes in the lower core plate, the nature of the error leads to an estimated PCT impact of 0°F. | Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect A review of existing plant analyses found no cases with square holes in the lower core plate. For a hypothetical case with square holes in the lower core plate, the nature of the error leads to an estimated PCT impact of 0°F. | ||
Background An error was discovered in the coding used for the implementation of implicit treatment of gravity head in NOTRUMP for continuous contact flow links. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | e NOTRUMP IMPLICIT GRAVITY HEAD ERROR (AP-600 IMPLEMENTATION) e | ||
===Background=== | |||
An error was discovered in the coding used for the implementation of implicit treatment of gravity head in NOTRUMP for continuous contact flow links. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation) | Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation) | ||
Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications. | Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications. | ||
NOTRUMP DROPLET FALL MODEL ERROR (AP600 IMPLEMENTATION) | NOTRUMP DROPLET FALL MODEL ERROR (AP600 IMPLEMENTATION) | ||
Background An error was discovered in the implementation of certain droplet fall models in NOTRUMP. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
===Background=== | |||
An error was discovered in the implementation of certain droplet fall models in NOTRUMP. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451. | |||
Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation) | Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation) | ||
Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications. | Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications. | ||
The code was using incorrect units for the rod-to-rod pitch when computing the view factors. This was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 . Affected Evaluation Model 1975 Westinghouse Small Break LOCA Evaluation Model with WFLASH 1985 Westinghouse-Small Break LOCA Evaluation Model with NOTRUMP Estimated Effect Due to the conservative methodology for specifying the power ratios among the fuel rods in a licensing basis small break LOCA analysis, there is little difference between the temperatures calculated for the hot rod and the surrounding rods which form the basis for the radiation heat transfer temperature sink in the problem. For a small break LOCA transient, the contribution to the peak cladding temperature from rod-to-rod radiation is at most a few degrees, even for conditions with temperatures approaching the 2200°F limit. As a result, rod-to-rod radiation is not modeled in licensing basis analyses, and there is no effect on any past or current analyses. | e SBLOCTA PROGRAMMING ERROR IN ROD-TO-ROD RADIATION MODEL e | ||
Further, sensitivity c~lculations confirmed that correcting the error would have a negligible effect on results for a hypothetical case modeling rod-to-rod radiation, as expected. | |||
ATTACHMENT 2 EFFECT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2 | ===Background=== | ||
Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. | An error was discovered in the SBLOCTA code related to the calculations for rod-to-rod radiation heat transfer. The code was using incorrect units for the rod-to-rod pitch when computing the view factors. This was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 . | ||
The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | Affected Evaluation Model 1975 Westinghouse Small Break LOCA Evaluation Model with WFLASH 1985 Westinghouse-Small Break LOCA Evaluation Model with NOTRUMP Estimated Effect Due to the conservative methodology for specifying the power ratios among the fuel rods in a licensing basis small break LOCA analysis, there is little difference between the temperatures calculated for the hot rod and the surrounding rods which form the basis for the radiation heat transfer temperature sink in the problem. For a small break LOCA transient, the contribution to the peak cladding temperature from rod-to-rod radiation is at most a few degrees, even for conditions with temperatures approaching the 2200°F limit. As a result, rod-to-rod radiation is not modeled in licensing basis analyses, and there is no effect on any past or current analyses. Further, sensitivity c~lculations confirmed that correcting the error would have a negligible effect on results for a hypothetical case modeling rod-to-rod radiation, as expected. | ||
Section A -Small Break LOCA Margin Utilization | |||
-North Anna Unit 1 A. PCT for Analysis of Record B. Prior PCT Assessments Allocated to AOR 1. NOTRUMP Specific Enthalpy Error 2. SALIBRARY Double Precision Errors 3. Fuel Rod Initialization Error 4. Loop Seal Elevation Error SBLOCA Augmented PCT for AOR C. PCT Assessments for | ATTACHMENT 2 EFFECT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2 | ||
Accumulation SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | |||
Section B -Large Break LOCA Margin Utilization | e e Effect of ECCS Evaluation Model Changes - North Anna Unit 1 The information provided herein is applicable to North Anna Power Station, Unit 1. It is based upon* reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | ||
-North Anna Unit 1 A. PCT for Analysis of Record B. Prior PCT Assessments Allocated to AOR 1. LBLOCA/Seismic SG Tube Collapse 2. BASH Accumulator Empty Flag LBLOCA Augmented PCT for AOR C. PCT Assessments for 10CFR50.46(a)(3)(i) | Section A - Small Break LOCA Margin Utilization - North Anna Unit 1 A. PCT for Analysis of Record 1704°F (1) | ||
Accumulation | B. Prior PCT Assessments Allocated to AOR -29°F | ||
{1} 1. Translation of Fluid Conditions from SATAN to LOCTA LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | : 1. NOTRUMP Specific Enthalpy Error +20°F (2) | ||
Notes { } and References ( ) provided below. | : 2. SALIBRARY Double Precision Errors -15°F (2) | ||
Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. | : 3. Fuel Rod Initialization Error +10°F (3) | ||
The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | : 4. Loop Seal Elevation Error -44°F (3) | ||
Section A -Small Break LOCA Margin Utilization | SBLOCA Augmented PCT for AOR 1675°F C. PCT Assessments for 1OCFR50.46(a)(3)(i) Accumulation 0°F SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1675°F Section B - Large Break LOCA Margin Utilization - North Anna Unit 1 A. PCT for Analysis of Record 2013°F (1) | ||
-North Anna Unit 2 A. PCT for Analysis of Record B. Prior PCT Assessments Allocated to AOR *1. NOTRUMP Specific Enthalpy Error 2. SALIBRARY Double Precision Errors 3. Fuel Rod Initialization Error 4. Loop Seal Elevation Error SBLOCA Augmented PCT for AOR C. PCT Assessments for 10CFR50.46(a)(3)(i) | B. Prior PCT Assessments Allocated to AOR 40°F | ||
Accumulation | : 1. LBLOCA/Seismic SG Tube Collapse +30°F (1) | ||
{1} 1. Removal of Part-Length CRDMs SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | : 2. BASH Accumulator Empty Flag +10°F (1) | ||
Section B -Large Break LOCA Margin Utilization | LBLOCA Augmented PCT for AOR 2053°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 15°F | ||
-North Anna Unit 2 A. PCT for Analysis of Record B. Prior PCT Assessments Allocated to AOR 1. LBLOCA/Seismic SG Tube Collapse 2. BASH Accumulator Empty Flag LBLOCA Augmented PCT for AOR C. PCT Assessments for 10CFR50.46(a)(3)(i) | : 1. Translation of Fluid Conditions from SATAN to LOCTA +15°F (4) | ||
Accumulation | LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2068°F Notes { } and References ( ) provided below. | ||
{1} 1. Translation of Fluid Conditions from SATAN to LOCTA 2. Removal of Part-Length CRDMs LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | I_ | ||
Notes { } and References ( ) are provided below. | |||
e e Effect of ECCS Evaluation Model Changes - North Anna Unit 2 The information provided herein is applicable to North Anna Power Station, Unit 2. It is based upon- reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | |||
Section A - Small Break LOCA Margin Utilization - North Anna Unit 2 A. PCT for Analysis of Record 1704°F (1) | |||
B. Prior PCT Assessments Allocated to AOR -29°F | |||
*1. NOTRUMP Specific Enthalpy Error +20°F (2) | |||
: 2. SALIBRARY Double Precision Errors -15°F (2) | |||
: 3. Fuel Rod Initialization Error +10°F (3) | |||
: 4. Loop Seal Elevation Error -44°F (3) | |||
SBLOCA Augmented PCT for AOR 1675°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 1°F | |||
: 1. Removal of Part-Length CRDMs +1°F (5) | |||
SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1676°F Section B - Large Break LOCA Margin Utilization - North Anna Unit 2 A. PCT for Analysis of Record 2013°F (1) | |||
B. Prior PCT Assessments Allocated to AOR 40°F | |||
: 1. LBLOCA/Seismic SG Tube Collapse +30°F (1) | |||
: 2. BASH Accumulator Empty Flag +10°F (1) | |||
LBLOCA Augmented PCT for AOR 2053°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 33°F | |||
: 1. Translation of Fluid Conditions from SATAN to LOCTA +15°F (4) | |||
: 2. Removal of Part-Length CRDMs +18°F (5) | |||
LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2086°F Notes { } and References ( ) are provided below. | |||
e e Effect of ECCS Evaluation Model Changes - North Anna Notes,: | |||
{1} The accumulation of changes (sum of absolute magnitudes) is less than 50°F and is not significant, as defined in 1OCFR50.46(a)(3)(i). | |||
==References:== | ==References:== | ||
(1) Letter from J. P. O'Hanlon (VEPCO) to Document Control Desk (USNRC), "Virginia Electric and Power Company, North Anna Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of | (1) Letter from J. P. O'Hanlon (VEPCO) to Document Control Desk (USNRC), "Virginia Electric and Power Company, North Anna Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46," | ||
ATTACHMENT 3 EFFECT OF ECCS EVALUATION MODEL CHANGES SURRY UNITS 1 AND 2 e *e Effect of Westinghouse ECCS Evaluation Model Changes -Surry The information provided herein is applicable to Surry Power Station, Units 1 and 2. It is , based upon* reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. | Serial No. 95-608, November 29, 1995. | ||
Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. | (2) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, North Anna and Surry Power Station Units 1 and 2, Report of ECCS Evaluation Model Changes and 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46," Serial No. 96~111, March 14, 1996. | ||
The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | (3) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, North Anna Power and Surry Power Station Units 1 and 2, Report of ECCS Evaluation Model Changes and 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46" Serial No. 96-390, August 1, 1996. | ||
Section A -Small Break LOCA Margin Utilization | (4) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, 'Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No. 97-174, March 27, 1997. | ||
-Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) B. Prior PCT Assessments Allocated to AOR SBLOCA Augmented PCT for AOR C. PCT Assessments for 10CFR50.46(a)(3)(i) | (5) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No. 98-303, May 28, 1998. | ||
Accumulation | I~ | ||
{1} SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | |||
Section B -Large Break LOCA Margin Utilization | ATTACHMENT 3 EFFECT OF ECCS EVALUATION MODEL CHANGES SURRY UNITS 1 AND 2 | ||
-Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) B. Prior PCT Assessments Allocated to AOR 1. ZIRLO& | |||
Accumulation | e *e Effect of Westinghouse ECCS Evaluation Model Changes - Surry The information provided herein is applicable to Surry Power Station, Units 1 and 2. It is | ||
{1} 1. Vessel & SG Calculation Errors in LUCIFER 2. LBLOCA Rod Internal Pressure Issues 3. Translation of Fluid Conditions from SATAN to LOCTA LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) | , based upon* reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively. | ||
Notes { } and References ( ) on the following page | Section A - Small Break LOCA Margin Utilization - Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) 1717°F (1) | ||
B. Prior PCT Assessments Allocated to AOR SBLOCA Augmented PCT for AOR 1717°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} | |||
SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1717°F Section B - Large Break LOCA Margin Utilization - Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) 2120°F (2) | |||
B. Prior PCT Assessments Allocated to AOR -16°F | |||
: 1. ZIRLO' Cladding -16°F LBLOCA Augmented PCT for AOR 2104°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 21°F | |||
: 1. Vessel & SG Calculation Errors in LUCIFER -6°F (2) | |||
: 2. LBLOCA Rod Internal Pressure Issues 0°F (2) | |||
: 3. Translation of Fluid Conditions from SATAN to LOCTA +15°F (3) | |||
LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2113°F Notes { } and References ( ) on the following page | |||
e e Effect of Westinghouse ECCS Evaluation Model Changes - Surry Notes: | |||
{1} The accumulation of changes (sum of absolute magnitudes) is less than 50°F and is not significant, as defined in 1OCFR50.46(a)(3)(i). | |||
==References:== | ==References:== | ||
(1) Letter from W. L. Stewart (Ya. Electric & Power Co.) to NRC, "Surry Power Station .Units 1 and 2 -Proposed Technical Specifications Changes -FL1H Increase/Statistical DNBR Methodology," Serial No. 91-374, July 8, 1991. (2) Letter from W. L. Stewart 0/EPCO) to Document Control Desk (USNRC), 'Virginia Electric and Power Company, Surry Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 10CFR50.46," Serial No. 94-254, April 27, 1994. (3) Letter from J. P. O'Hanlon (Ya. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No. 97-174, March 27, 1997.}} | (1) Letter from W. L. Stewart (Ya. Electric & Power Co.) to NRC, "Surry Power Station | ||
.Units 1 and 2 - Proposed Technical Specifications Changes - FL1H Increase/Statistical DNBR Methodology," Serial No. 91-374, July 8, 1991. | |||
(2) Letter from W. L. Stewart 0/EPCO) to Document Control Desk (USNRC), 'Virginia Electric and Power Company, Surry Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 10CFR50.46," Serial No. | |||
94-254, April 27, 1994. | |||
(3) Letter from J. P. O'Hanlon (Ya. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No. 97-174, March 27, 1997.}} |
Revision as of 00:59, 21 October 2019
ML18152B422 | |
Person / Time | |
---|---|
Site: | Surry, North Anna ![]() |
Issue date: | 05/27/1999 |
From: | Mccarthy J VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.) |
To: | NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
References | |
99-279, NUDOCS 9906030341 | |
Download: ML18152B422 (14) | |
Text
e e VIRGINIA ELECTRIC AND POWER COMPANY RICHMOND, VIRGINIA 23261 May 27, 1999 .
United States Nuclear Regulatory Commission Serial No.: 99-279 Attention: Document Control Desk NL&OS/GDM RO Washington, D.C. 20555 Docket Nos.: 50-280/281 50-338/339 License Nos.: DPR-32/37 NPF-4/7 Gentlemen:
VIRGINIA ELECTRIC AND POWER COMPANY SURRY AND NORTH ANNA POWER STATIONS UNITS 1 AND 2 REPORT OF EMERGENCY CORE COOLING SYSTEM (ECCS) EVALUATION MODEL CHANGES PURSUANT TO THE REQUIREMENTS OF 1OCFRS0.46 Pursuant to 1OCFR50.46(a)(3)(ii) Virginia Electric and Power Company is providing information concerning changes to the ECCS Evaluation Models and their application in existing licensing analyses. Information is also provided which quantifies the effect of these changes upon reported results for North Anna and Surry Power Stations and demonstrates continued compliance with the acceptance criteria of 1O.CFR50.46. contains excerpted portions of Westinghouse reports describing the changes to the Westinghouse ECCS Evaluation Models which are applicable to North Anna and Surry and have been implemented during calendar year 1998.
Information regarding the effect of the ECCS Evaluation Model changes upon the reported LOCA analysis of record (AOR) results is provided for the North Anna and Surry Power Stations in Attachments 2 and 3, respectively. To summarize the information in Attachments 2 and 3, the calculated peak cladding temperature (PCT) for the small and large break LOCA analyses for North Anna and Surry are given below. None of these results include significant changes, based on the criterion in 1OCFR50.46(a)(3)(i).
North Anna Unit 1 - Small break: 1675°F North Anna Unit 1 - Large break: 2068°F North Anna Unit 2 - Small break: 1676°F North Anna Unit 2 - Large break: 2086°F (-\ oo.}
Surry Units 1 and 2 - Small break: 1717°F Surry Units 1 and 2 - Large break: 2113°F We have evaluated these issues and the associated changes in the applicable licensing basis PCT results. These results demonstrate compliance with the requirements of
1OCFR50.46(b).
e e No further action is required to demonstrate compliance with 1OCFR50.46 requirements.
, If you have any questions or require additional information, please contact us.
Very truly yours, Commitments made in this letter: None Attachments:
- 1) Westinghouse Report of ECCS Evaluation Model Changes - North Anna Units 1 and 2 and Surry Units 1 and 2
- 2) Effect of ECCS Evaluation Model Changes - North Anna Units 1 and 2
- 3) Effect of ECCS Evaluation Model Changes - Surry Units 1 and 2 cc: Regional Administrator U. S. Nuclear Regulatory Commission Region II Atlanta Federal Center 61 Forsyth Street, SW, Suite 23 T85 Atlanta, Georgia 30303 Mr. R. A. Musser NRC Senior Resident Inspector Surry Power Station Michael J. Morgan NRC Senior Resident Inspector North Anna Power Station
ATTACHMENT 1 WESTINGHOUSE REPORT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2 AND SURRY UNITS 1 AND 2
SATIMP TRUNCATION ERROR e
Background
Various methods exist for entering input data to the SATIMP code, which is used to generate the plant-specific input models for SATAN-VI. An error was discovered in the SATIMP whereby different methods of entering the input data could lead to minor differences in the resulting SATAN-VI input values, due to differences in truncation methods. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F.
SATAN-VI MOMENTUM FLUX LOGIC ERRORS
Background
An error in the SATAN-VI initialization logic caused momentum flux calculations to be skipped for the flow paths on the vessel side of the break, which is contrary to the guidelines that apply for modeling momentum flux in the 1981 EM version of SATAN-VI.
This error has been corrected in the latest version of the code, along with two closely related errors in the momentum flux pressure drop calculations which were discovered during the course or the model review. These corrections were determined to be a closely related group of Non-Discretionary Changes in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect Representative plant calculations showed that the corrections to the SATAN-VI momentum flux logic generally result in a small PCT benefit that is conservatively being tracked as 0°F for 1OCFR50.46 reporting purposes.
e SATAN-VI TRANSITION BOILING LIQUID DENSITY ERROR e
Background
In SATAN-VI, the cladding surface heat transfer coefficient in the transition boiling regime is computed using the Westinghouse Transition Boiling Correlation. A minor error was discovered in the calculation of the liquid density that is used with this correlation under certain conditions. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BART 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect The nature of this error leads to an estimated PCT impact of 0°F.
BASHER HEAT LINK AREA ERROR
Background
BASHER was issued in the 1981 Westinghouse Large Break LOCA Evaluation Model with BASH to generate the plant-specific input models for BASH. An error was discovered in the BASHER calculation of the lower plenum metal-to-fluid heat transfer area. This error only applies for plants with square holes in the lower core plate, a configuration which is atypical of Westinghouse plants. This correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1981 Westinghouse Large Break LOCA Evaluation Model with BASH Estimated Effect A review of existing plant analyses found no cases with square holes in the lower core plate. For a hypothetical case with square holes in the lower core plate, the nature of the error leads to an estimated PCT impact of 0°F.
e NOTRUMP IMPLICIT GRAVITY HEAD ERROR (AP-600 IMPLEMENTATION) e
Background
An error was discovered in the coding used for the implementation of implicit treatment of gravity head in NOTRUMP for continuous contact flow links. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation)
Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications.
NOTRUMP DROPLET FALL MODEL ERROR (AP600 IMPLEMENTATION)
Background
An error was discovered in the implementation of certain droplet fall models in NOTRUMP. This error only affects advanced plant calculations which invoke these models. This error correction was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451.
Affected Evaluation Model 1985 Westinghouse Small Break LOCA Evaluation Model with NOTRUMP (AP600 Implementation)
Estimated Effect The nature of this error leads to no impact on the calculated PCT for all standard Westinghouse PWR evaluation model applications.
e SBLOCTA PROGRAMMING ERROR IN ROD-TO-ROD RADIATION MODEL e
Background
An error was discovered in the SBLOCTA code related to the calculations for rod-to-rod radiation heat transfer. The code was using incorrect units for the rod-to-rod pitch when computing the view factors. This was determined to be a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 .
Affected Evaluation Model 1975 Westinghouse Small Break LOCA Evaluation Model with WFLASH 1985 Westinghouse-Small Break LOCA Evaluation Model with NOTRUMP Estimated Effect Due to the conservative methodology for specifying the power ratios among the fuel rods in a licensing basis small break LOCA analysis, there is little difference between the temperatures calculated for the hot rod and the surrounding rods which form the basis for the radiation heat transfer temperature sink in the problem. For a small break LOCA transient, the contribution to the peak cladding temperature from rod-to-rod radiation is at most a few degrees, even for conditions with temperatures approaching the 2200°F limit. As a result, rod-to-rod radiation is not modeled in licensing basis analyses, and there is no effect on any past or current analyses. Further, sensitivity c~lculations confirmed that correcting the error would have a negligible effect on results for a hypothetical case modeling rod-to-rod radiation, as expected.
ATTACHMENT 2 EFFECT OF ECCS EVALUATION MODEL CHANGES NORTH ANNA UNITS 1 AND 2
e e Effect of ECCS Evaluation Model Changes - North Anna Unit 1 The information provided herein is applicable to North Anna Power Station, Unit 1. It is based upon* reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively.
Section A - Small Break LOCA Margin Utilization - North Anna Unit 1 A. PCT for Analysis of Record 1704°F (1)
B. Prior PCT Assessments Allocated to AOR -29°F
- 1. NOTRUMP Specific Enthalpy Error +20°F (2)
- 2. SALIBRARY Double Precision Errors -15°F (2)
- 3. Fuel Rod Initialization Error +10°F (3)
- 4. Loop Seal Elevation Error -44°F (3)
SBLOCA Augmented PCT for AOR 1675°F C. PCT Assessments for 1OCFR50.46(a)(3)(i) Accumulation 0°F SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1675°F Section B - Large Break LOCA Margin Utilization - North Anna Unit 1 A. PCT for Analysis of Record 2013°F (1)
B. Prior PCT Assessments Allocated to AOR 40°F
- 1. LBLOCA/Seismic SG Tube Collapse +30°F (1)
- 2. BASH Accumulator Empty Flag +10°F (1)
LBLOCA Augmented PCT for AOR 2053°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 15°F
- 1. Translation of Fluid Conditions from SATAN to LOCTA +15°F (4)
LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2068°F Notes { } and References ( ) provided below.
I_
e e Effect of ECCS Evaluation Model Changes - North Anna Unit 2 The information provided herein is applicable to North Anna Power Station, Unit 2. It is based upon- reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively.
Section A - Small Break LOCA Margin Utilization - North Anna Unit 2 A. PCT for Analysis of Record 1704°F (1)
B. Prior PCT Assessments Allocated to AOR -29°F
- 1. NOTRUMP Specific Enthalpy Error +20°F (2)
- 2. SALIBRARY Double Precision Errors -15°F (2)
- 3. Fuel Rod Initialization Error +10°F (3)
- 4. Loop Seal Elevation Error -44°F (3)
SBLOCA Augmented PCT for AOR 1675°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 1°F
- 1. Removal of Part-Length CRDMs +1°F (5)
SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1676°F Section B - Large Break LOCA Margin Utilization - North Anna Unit 2 A. PCT for Analysis of Record 2013°F (1)
B. Prior PCT Assessments Allocated to AOR 40°F
- 1. LBLOCA/Seismic SG Tube Collapse +30°F (1)
- 2. BASH Accumulator Empty Flag +10°F (1)
LBLOCA Augmented PCT for AOR 2053°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 33°F
- 1. Translation of Fluid Conditions from SATAN to LOCTA +15°F (4)
- 2. Removal of Part-Length CRDMs +18°F (5)
LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2086°F Notes { } and References ( ) are provided below.
e e Effect of ECCS Evaluation Model Changes - North Anna Notes,:
{1} The accumulation of changes (sum of absolute magnitudes) is less than 50°F and is not significant, as defined in 1OCFR50.46(a)(3)(i).
References:
(1) Letter from J. P. O'Hanlon (VEPCO) to Document Control Desk (USNRC), "Virginia Electric and Power Company, North Anna Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46,"
Serial No.95-608, November 29, 1995.
(2) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, North Anna and Surry Power Station Units 1 and 2, Report of ECCS Evaluation Model Changes and 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46," Serial No. 96~111, March 14, 1996.
(3) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, North Anna Power and Surry Power Station Units 1 and 2, Report of ECCS Evaluation Model Changes and 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 1OCFR50.46" Serial No.96-390, August 1, 1996.
(4) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, 'Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No.97-174, March 27, 1997.
(5) Letter from J. P. O'Hanlon (Va. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No.98-303, May 28, 1998.
I~
ATTACHMENT 3 EFFECT OF ECCS EVALUATION MODEL CHANGES SURRY UNITS 1 AND 2
e *e Effect of Westinghouse ECCS Evaluation Model Changes - Surry The information provided herein is applicable to Surry Power Station, Units 1 and 2. It is
, based upon* reports from Westinghouse Electric Corporation for issues involving the ECCS evaluation models and plant-specific application of the models in the existing analyses. Peak cladding temperature (PCT) values and margin allocations represent issues for which permanent resolutions have been implemented. The assessments for small break and large break LOCA are presented in Sections A and B, respectively.
Section A - Small Break LOCA Margin Utilization - Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) 1717°F (1)
B. Prior PCT Assessments Allocated to AOR SBLOCA Augmented PCT for AOR 1717°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1}
SBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 1717°F Section B - Large Break LOCA Margin Utilization - Surry Units 1 and 2 A. PCT for Analysis of Record (AOR) 2120°F (2)
B. Prior PCT Assessments Allocated to AOR -16°F
- 1. ZIRLO' Cladding -16°F LBLOCA Augmented PCT for AOR 2104°F C. PCT Assessments for 10CFR50.46(a)(3)(i) Accumulation {1} 21°F
- 1. Vessel & SG Calculation Errors in LUCIFER -6°F (2)
- 2. LBLOCA Rod Internal Pressure Issues 0°F (2)
- 3. Translation of Fluid Conditions from SATAN to LOCTA +15°F (3)
LBLOCA Licensing Basis PCT (AOR PCT+ PCT Assessments) 2113°F Notes { } and References ( ) on the following page
e e Effect of Westinghouse ECCS Evaluation Model Changes - Surry Notes:
{1} The accumulation of changes (sum of absolute magnitudes) is less than 50°F and is not significant, as defined in 1OCFR50.46(a)(3)(i).
References:
(1) Letter from W. L. Stewart (Ya. Electric & Power Co.) to NRC, "Surry Power Station
.Units 1 and 2 - Proposed Technical Specifications Changes - FL1H Increase/Statistical DNBR Methodology," Serial No.91-374, July 8, 1991.
(2) Letter from W. L. Stewart 0/EPCO) to Document Control Desk (USNRC), 'Virginia Electric and Power Company, Surry Power Station Units 1 and 2, 30-Day Report of ECCS Evaluation Model Changes Per Requirements of 10CFR50.46," Serial No.94-254, April 27, 1994.
(3) Letter from J. P. O'Hanlon (Ya. Electric & Power Co.) to USNRC, "Virginia Electric and Power Company, Surry and North Anna Power Stations Units 1 and 2, Report of Emergency Core Cooling System (ECCS) Evaluation Changes Pursuant to the Requirements of 10CFR50.46," Serial No.97-174, March 27, 1997.