Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML18094B148 + (ML18094B148)
- ML18094B149 + (ML18094B149)
- 05000272/LER-1989-029, :on 891016,determined That Tech Spec 3.3.2.1 Not Complied W/Historically.Caused by Inadequate Procedures. Procedures AOP-CN-1, Loss of Feedwater Pump & OP III-9.3.2 Re Feed Pump Operation Modified + (ML18094B150)
- ML18094B151 + (ML18094B151)
- IR 05000272/1989023 + (ML18094B153)
- ML18094B154 + (ML18094B154)
- ML18094B156 + (ML18094B156)
- ML18094B157 + (ML18094B157)
- IR 05000272/1989022 + (ML18094B159)
- ML18094B161 + (ML18094B161)
- 05000272/LER-1989-018, :on 890502,several Wires in Solid State Protection Sys Cabinets Discovered Improperly Connected to Circuit Board Connectors.Caused by Inadequate Connection of TERMI-POINT Clips.Connections Replaced + (ML18094B163)
- ML18094B166 + (ML18094B166)
- ML18094B167 + (ML18094B167)
- ML18094B168 + (ML18094B168)
- ML18094B170 + (ML18094B170)
- ML18094B172 + (ML18094B172)
- ML18094B173 + (ML18094B173)
- ML18094B174 + (ML18094B174)
- ML18094B175 + (ML18094B175)
- ML18094B177 + (ML18094B177)
- ML18094B178 + (ML18094B178)
- ML18094B179 + (ML18094B179)
- ML18094B183 + (ML18094B183)
- ML18094B184 + (ML18094B184)
- ML18094B185 + (ML18094B185)
- ML18094B187 + (ML18094B187)
- ML18094B188 + (ML18094B188)
- ML18094B189 + (ML18094B189)
- ML18094B190 + (ML18094B190)
- ML18094B191 + (ML18094B191)
- ML18094B192 + (ML18094B192)
- ML18094B193 + (ML18094B193)
- PNO-I-89-095, on 891201,unit Initiated Cold Shutdown to Mode 4 Due to Nearing Expiration of Tech Spec Action Statement. Containment Insp Revealed Body to Bonnet Leak on Safety Injection Check Valve.Repairs Completed + (ML18094B194)
- ML18094B195 + (ML18094B195)
- ML18094B196 + (ML18094B196)
- ML18094B197 + (ML18094B197)
- 05000272/LER-1989-032, :on 891109,during Turbine Volumetric Flow Test, power-range Channels Could Not Be Adjusted to 100% Power Due to Bottoming Out of Fine Gain Potentiometer.Caused by Personnel Error.Directives Reviewed + (ML18094B198)
- ML18094B200 + (ML18094B200)
- ML18094B201 + (ML18094B201)
- ML18094B202 + (ML18094B202)
- ML18094B204 + (ML18094B204)
- ML18094B205 + (ML18094B205)
- ML18094B206 + (ML18094B206)
- ML18094B207 + (ML18094B207)
- ML18094B208 + (ML18094B208)
- ML18094B209 + (ML18094B209)
- ML18094B210 + (ML18094B210)
- IR 05000272/1989081 + (ML18094B212)
- ML18094B213 + (ML18094B213)
- ML18094B214 + (ML18094B214)
- ML18094B215 + (ML18094B215)