ML22166A431
ML22166A431 | |
Person / Time | |
---|---|
Site: | Perry |
Issue date: | 10/15/2020 |
From: | Randy Baker NRC/RGN-III/DRS/OLB |
To: | FirstEnergy Nuclear Operating Co |
Baker R | |
Shared Package | |
ML20136A286 | List: |
References | |
Download: ML22166A431 (5) | |
Text
ES-301 Transient and Event Checklist Form ES-301-5 Crew-A Facility: Perry Date of Exam: Feb. 2021 Operating Test No.: 2021-1 A E Scenarios P V 3 5 x x T M P E O I L N Crew Crew Crew Crew T N I T Position Position Position Position A I C L M S A B S A B S A B S A B A T U R T O R T O R T O R T O N Y (*)M(*)
O C P O C P O C P O C P T P E R I U SRO-U RX 1 1 1 1 0
- 1 NOR 1 2 2 1 1 1 I/C 4,7,9 3,4,5, 7,8,9, 11 4 4 2 10,11 MAJ 6 6 2 2 2 1 TS 4,5 2 0 2 2 SRO-I RX 2 1 2 1 1 0
- 1 NOR 1 1 1 1 1 I/C 3,4,5, 3,5,9, 11 4 4 2 7,8,9 10,11 MAJ 6 6 2 2 2 1 TS 3,4 2 0 2 2 RO #1 Rx 2 1 1 1 0 NOR 2 1 1 1 1 I/C 3,5,8 4,7,8, 7 4 4 2 11 MAJ 6 6 2 2 2 1 TS 0 0 2 2 Rx NOR I/C MAJ TS Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG 1021, Rev. 11 Page 1 of 5
ES-301 Transient and Event Checklist Form ES-301-5 Crew-B Facility: Perry Date of Exam: Feb. 2021 Operating Test No.: 2021-1 A E Scenarios P V 3 5 x x T M P E O I L N Crew Crew Crew Crew T N I T Position Position Position Position A I C L M S A B S A B S A B S A B A T U R T O R T O R T O R T O N Y (*)M(*)
O C P O C P O C P O C P T P E R I U SRO-U RX 1 1 1 1 0
- 2 NOR 1 2 2 1 1 1 I/C 4,7,9 3,4,5, 7,8,9, 11 4 4 2 10,11 MAJ 6 6 2 2 2 1 TS 4,5 3 0 2 2 SRO-I RX 2 1 2 1 1 0
- 2 NOR 1 1 1 1 1 I/C 3,4,5, 3,5,9, 11 4 4 2 7,8,9 10,11 MAJ 6 6 2 2 2 1 TS 3,4 2 0 2 2 RO #2 Rx 2 1 1 1 0 NOR 2 1 1 1 1 I/C 3,5,8 4,7,8, 7 4 4 2 11 MAJ 6 6 2 2 2 1 TS 0 0 2 2 Rx NOR I/C MAJ TS Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG 1021, Rev. 11 Page 2 of 5
ES-301 Transient and Event Checklist Form ES-301-5 Crew-C Facility: Perry Date of Exam: Feb. 2021 Operating Test No.: 2021-1 A E Scenarios P V 2 3 x x T M P E O I L N Crew Crew Crew Crew T N I T Position Position Position Position A I C L M S A B S A B S A B S A B A T U R T O R T O R T O R T O N Y (*)M(*)
O C P O C P O C P O C P T P E R I U SRO-U RX 1 1 1 1 0
- 3 NOR 2 1 2 1 1 1 I/C 3,4,5, 4,7,9 9 4 4 2 6,7,9 MAJ 8 6 2 2 2 1 TS 3,5 2 0 2 2 SRO-I RX 1 2 2 1 1 0
- 3 NOR 1 1 1 1 1 I/C 3,4,6, 3,4,5, 10 4 4 2 7 7,8,9 MAJ 8 6 2 2 2 1 TS 3,4 2 0 2 2 RO #3 Rx 2 1 1 1 0 NOR 2 1 1 1 1 I/C 4,5,6, 3,5,8 7 4 4 2 9
MAJ 8 6 2 2 2 1 TS 0 0 2 2 Rx NOR I/C MAJ TS Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG 1021, Rev. 11 Page 3 of 5
ES-301 Transient and Event Checklist Form ES-301-5 Crew-D Facility: Perry Date of Exam: Feb. 2021 Operating Test No.: 2021-1 A E Scenarios P V 2 3 x x T M P E O I L N Crew Crew Crew Crew T N I T Position Position Position Position A I C L M S A B S A B S A B S A B A T U R T O R T O R T O R T O N Y (*)M(*)
O C P O C P O C P O C P T P E R I U SRO-I RX 1 2 2 1 1 0
- 4 NOR 2 1 1 1 1 I/C 3,4,5, 3,5,8 9 4 4 2 6,7,9 MAJ 8 6 2 2 2 1 TS 3,5 2 0 2 2 RO #4 RX 1 1 1 1 0 NOR 1 1 1 1 1 I/C 3,4,6, 4,7,9 7 4 4 2 7
MAJ 8 6 2 2 2 1 TS 0 0 2 2 Rx NOR I/C MAJ TS Rx NOR I/C MAJ TS Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG 1021, Rev. 11 Page 4 of 5
ES-301 Transient and Event Checklist Form ES-301-5 Crew-E Facility: Perry Date of Exam: Feb. 2021 Operating Test No.: 2021-1 A E Scenarios P V 2 4 5 x T M P E O I L N Crew Crew Crew Crew T N I T Position Position Position Position A I C L M S A B S A B S A B S A B A T U R T O R T O R T O R T O N Y (*)M(*)
O C P O C P O C P O C P T P E R I U SRO-I RX 1 1 2 1 1 0
- 5 NOR 2 2 2 1 1 1 I/C 4,5,6, 3,4,5, 3,5,9, 15 4 4 2 9 6,7,9 10,11 MAJ 8 8 6 3 2 2 1 TS 3,5 2 0 2 2 SRO-I RX 1 1 2 1 1 0
- 6 NOR 2 2 2 1 1 1 I/C 3,4,5, 3,4,6, 4,7,8, 14 4 4 2 6,7,9 7 11 MAJ 8 8 6 3 2 2 1 TS 3,5 2 0 2 2 SRO-I Rx 1 1 2 1 1 0
- 7 NOR 2 2 2 1 1 1 I/C 3,4,6, 4,5,6, 3,4,5, 7 9 7,8,9, 16 4 4 2 10,11 MAJ 8 8 6 3 2 2 1 TS 4,5 2 0 2 2 Rx NOR I/C MAJ TS Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG 1021, Rev. 11 Page 5 of 5