ML070120337

NPDES Vegetated Buffers - JAFNPP SEIS Web Reference

ML070120337
Person / Time
Site:	FitzPatrick
Issue date:	12/28/2006
From:	Environmental Protection Agency
To:	Office of Nuclear Reactor Regulation
jmm7
References
Download: ML070120337 (3)

Text

EPA -Stormwater Menu of BMPs Pagel of3_U.S. Environmental Protection Agency National Pollutant Discharge Elimination System (NPDES)Recent Additions I Contact Us I Print Version Search NPDES: EPA Home > OW Home > OWM Home > NPDES H6me > Stormwater

> Menu of BMPs Menu of BMPs Home BMP Background Public Education

&Outreach on Stormwater Impacts Public Involvement/

Participation All of the words All Vegetated Buffers Click here to comment on this fact sheet Illicit Discharge Detection

&Elimination Construction Site Stormwater Runoff Control Post-Construction Stormwater Management in New Development

&Redevelopment Pollution Prevention/Good Housekeeping for Municipal Operations Measurable Goals Stormwater Home Minimum Measure: Construction Site Stormwater Runoff Control Subcategory:

Sediment Control Description Vegetated buffers are areas of natural or established vegetation maintained to protect the water quality of neighboring areas. Buffer zones slow stormwater runoff, provide an area where runoff can permeate the soil, contribute to ground water recharge, and filter sediment.

Slowing runoff also helps to prevent soil erosion and streambank collapse.Applicability Vegetated buffers can be used in any area able to support vegetation.

They are most effective and beneficial on floodplains, near wetlands, along streambanks, and on unstable slopes.Siting and Design Considerations To establish an effective vegetative buffer, follow these guidelines:

Buffers at the perimetersof.

const ructionsites laresim liar to, ag ricultural buffers in thatjh ey itrap, sediimenrts and remove 'polplutants'in

,,runoff from exposed areas (So-urce:

Nova S0otia 0 0 0 Make sure soils are not compacted.

[IDepartment ofAgriculture and isheries,2000')

I Make sure slopes are less than 5 percent unless temporary erosion control mats are also used.Determine buffer widths after carefully considering slope, vegetation, soils, depth to impermeable layers, runoff sediment characteristics, type and amount of pollutants, and annual rainfall.http://cfpub.epa.gov/npdes/stormwater/menuofbmps/index.cfm?action=factsheet-results&view=specific&bmp=51 12/28/2006 EPA -Stormwater Menu of BMPs Page 2 of 3* Make sure buffer widths increase as slope increases.

• Intermix zones of vegetation (native vegetation in particular), including grasses, deciduous and evergreen shrubs, and understory and overstory trees." In areas where flows are concentrated and fast, combine buffer zones with other practices such as level spreaders, infiltration areas, or diversions to prevent erosion and rilling.Limitations Adequate land must be available for a vegetated buffer. If land cost is high, buffer zones might not be cost-effective.

In addition, adequate vegetative cover must be maintained in the buffer to keep it effective.

Vegetated buffers work well with sheet flows, but they are not appropriate for mitigating concentrated stormwater flows.Maintenance Considerations Keeping vegetation healthy in vegetated buffers requires routine maintenance.

Depending on species, soil types, and climatic conditions, maintenance can include weed and pest control, mowing, fertilizing, liming, irrigating, and pruning. Inspection and maintenance are most important when buffer areas are first installed.

Once established, vegetated buffers do not require maintenance beyond the routine procedures and periodic inspections.

Inspect them after heavy rainfall and at least once a year.Focus on encroachment, gully erosion, the density of the vegetation, evidence of concentrated flows through.the areas, and any damage from foot or vehicular traffic. If more than 6 inches of sediment has accumulated, remove it.Effectiveness Several studies indicate greater than 90 percent reductions in sediment and nitrate concentrations when vegetated buffers are used.Buffer/filter strips do a reasonably good job of removing phosphorus attached to sediment, but they are not so effective at removing dissolved phosphorus (Gilliam, 1994).References Gilliam, J.W. 1994. Reparian Wetlands and Water Quality. Journal of Environmental Quality 23:896-900.

Cited in Michigan Department of Environmental Quality. 1998. Guidebook of Best Management Practices for Michigan Watersheds.

Michigan Department of Environmental Quality, Surface Water Quality Division, Lansing, MI.Nova Scotia Department of Agriculture and Fisheries.

2000. Awareness and Communication Project Reports, Appendix E: PhotographsD11. Accessed December 1, 2005.USEPA (U.S. Environmental Protection Agency). 1992. Stormwater Management for Industrial Activities:

Developing Pollution Prevention Plans and Best Management Practices.

EPA 832-R-92-006.

U.S. Environmental Protection Agency, Office of Water, Washington, DC.USEPA (U.S. Environmental Protection Agency). 1996. Protecting Natural Wetlands:

A Guide to Stormwater Best Management Practices.

EPA 843-B-96-001.

U.S. Environmental Protection Agency, Office of Water, Washington, DC.Click here to comment on this fact sheet I http ://cfpub.

epa.gov/npdes/§ton-nwater/menuofbmps/index.cfhin?action=factsheet-results&vlew=specific&bmp=50 1/820 12/28/2006 EPA -Stormwater Menu of BMPs Page 3 of S Office of Water I Office of Wastewater Management Disc(aimer I Search EPA EPA Home I Privacy and Security Notice I Contact Us Last updated on May 22, 2006 8:28 AM URL:http://cfpub.epa.gov/npdes/stormwater/menuofbmps/index.cfm http://cfpub.epa.gov/npdes/stormwater/menuofbmps/index.cfm?action=factsheet-results&view=specific&bmp=50 12/28/2006