NL-17-157, Amendment 19 to License Renewal Application (LRA): Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
Line 18: Line 18:


=Text=
=Text=
{{#Wiki_filter:A -===* Entergx NL-17-157 December 14, 2017 U.S. Nuclear Regulatory Commission Document Control Desk 11545 Rockville Pike, TWFN-2 F1 Rockville, MD 20852-2738  
{{#Wiki_filter:)
A                                                                         Entergy Nuclear Northeast Indian Point Energy Center
-===* Entergx 450 Broadway, GSB P.O. Box 249 Buchanan, NY 10511-0249 Tel (914) 254-2055 Anthony J Vitale Site Vice President NL-17-157 December 14, 2017 U.S. Nuclear Regulatory Commission Document Control Desk 11545 Rockville Pike, TWFN-2 F1 Rockville, MD 20852-2738


==SUBJECT:==
==SUBJECT:==
Amendment 19 to License Renewal Application (LRA) Indian Point Nuclear Generating Unit Nos. 2 and 3 Docket Nos. 50-247 and 50-286 License Nos. DPR-26 and DPR-64 ) Entergy Nuclear Northeast Indian Point Energy Center 450 Broadway, GSB P.O. Box 249 Buchanan, NY 10511-0249 Tel (914) 254-2055 Anthony J Vitale Site Vice President
Amendment 19 to License Renewal Application (LRA)
Indian Point Nuclear Generating Unit Nos. 2 and 3 Docket Nos. 50-247 and 50-286 License Nos. DPR-26 and DPR-64


==REFERENCES:==
==REFERENCES:==
: 1. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application" (NL-07-039)
: 1. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application" (NL-07-039)
: 2. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Boundary Drawings" (NL-07-040)
: 2. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Boundary Drawings" (NL-07-040)
: 3. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Environmental Report References" * (NL-07-041)
: 3. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Environmental Report References"
                          *(NL-07-041)
: 4. Entergy Letter dated October 11, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Applicat'ion (LRA)" (NL-07-124)
: 4. Entergy Letter dated October 11, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Applicat'ion (LRA)" (NL-07-124)
: 5. Entergy Letter dated November 14, 2007, F. R. Dacimo to Document Control Desk, "Supplement to License Renewal Application (LRA) Environmental Report References" (NL-07-133)  
: 5. Entergy Letter dated November 14, 2007, F. R. Dacimo to Document Control Desk, "Supplement to License Renewal Application (LRA)
Environmental Report References" (NL-07-133)


==Dear Sir or Madam:==
==Dear Sir or Madam:==
In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRG review, an amendment to the renewal application must be submitted that identifies any change to the CLB of the facility that materially affects the contents of the license renewal application (LRA), including the FSAR supplement.
 
In the referenced letters, Entergy Nuclear Operations, Inc. applied for ~enewal of the Indian Point Nuclear Generating Units 2 and 3 operating licenses.
In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRG review, an amendment to the renewal application must be submitted that identifies any change to the CLB of the facility that materially affects the contents of the license renewal application (LRA), including the FSAR supplement. In the referenced letters, Entergy Nuclear Operations, Inc. applied for ~enewal of the Indian Point Nuclear Generating Units 2 and 3 operating licenses. This letter provides Amendment 19 of the Indian Point Units 2 and 3 license renewal application.
This letter provides Amendment 19 of the Indian Point Units 2 and 3 license renewal application.
There are no new commitments being made in this submittal.
There are no new commitments being made in this submittal.
Should you have any questions concerning this report, please contact Mr. Robert W. Walpole, Licensing Manager, at (914) 254-6710.
Should you have any questions concerning this report, please contact Mr. Robert W. Walpole, Licensing Manager, at (914) 254-6710.
NL-17-157 Dockets 50-24 7 and 50-286 Page 2 of 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on 12..-11-r~  
 
,2011. Sincerely, AJV/rl Attachment
NL-17-157 Dockets 50-24 7 and 50-286 Page 2 of 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on 12..-11-r~           ,2011.
: 1. Annual Update Amendment cc: Mr. David C. Lew, Regional Administrator, NRC Region I Mr. William Burton, Senior Project Manager, NRC DLR Mr. Richard V. Guzman, Senior Project Manager, NRC NRR DORL Ms. Bridget Frymire, New York State Department of Public Service Ms. Alicia Barton, President and CEO NYSERDA NRC Resident Inspector's Office ATTACHMENT 1 TO NL-17-157 ANNUAL AMENDMENT ENTERGY NUCLEAR OPERATIONS, INC. INDIAN POINT NUCLEAR GENERATING UNIT NOS. 2 and 3 DOCKET NO. 50-247 and 50-286 NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Page 1 of 16 INDIAN POINT NUCLEAR GENERATING UNIT Nos. 2 AND 3 LICENSE RENEWAL APPLICATION ANNUAL AMENDMENT In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRC review, an amendment
Sincerely, AJV/rl Attachment       1. Annual Update Amendment cc:   Mr. David C. Lew, Regional Administrator, NRC Region I Mr. William Burton, Senior Project Manager, NRC DLR Mr. Richard V. Guzman, Senior Project Manager, NRC NRR DORL Ms. Bridget Frymire, New York State Department of Public Service Ms. Alicia Barton, President and CEO NYSERDA NRC Resident Inspector's Office
 
ATTACHMENT 1 TO NL-17-157 ANNUAL AMENDMENT ENTERGY NUCLEAR OPERATIONS, INC.
INDIAN POINT NUCLEAR GENERATING UNIT NOS. 2 and 3 DOCKET NO. 50-247 and 50-286
 
NL-17-157                                         Page 1 of 16 Dockets 50-247 and 50-286 Attachment 1 INDIAN POINT NUCLEAR GENERATING UNIT Nos. 2 AND 3 LICENSE RENEWAL APPLICATION ANNUAL AMENDMENT In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRC review, an amendment
* to the renewal application must be submitted that identifies any change to the CLB of the facility
* to the renewal application must be submitted that identifies any change to the CLB of the facility
* that materially affects the contents of the license renewal application (LRA), including the FSAR supplement.
* that materially affects the contents of the license renewal application (LRA), including the FSAR supplement. This attachment is the required annual amendment to the LRA.
This attachment is the required annual amendment to the LRA. Amendment 19 is based on a review of documents potentially affecting the Current Licensing Basis (CLB) during the periods of September 1, 2016 through August 31, 2017. The review concluded that certain sections of the LRA are affected by changes to CLB documents and other related LRA reviews. The table below summarizes the changes listing the affected system (if applicable), an explanation of the change (including effect on the LRA), and the affected LRA section. Affected LRA Sections Change LRA Section Affected IP2 -EC 38036 Table 3.3.2-19-4-IP2 Review ER IP2-05-15107 and develop new ECR/EC to install long radius coated elbows at the steam jet air ejector. REF ECR 13994 and TEMP MOD 37924 for work accomplished on 21 SJE A IP2 -EC 53505 Table 2.3.3-2-1P2 Table 3.3.2-2-IP2 Base EC for IP2 EOG cooler rupture disk installation IP2 -EC 53509 Table 2.3.3-2-IP3 Table 3.3.2-2-IP3 Base EC for IP3 EOG cooler rupture . disk installation NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Change IP3 -EC 59290 Evaluate the use of rubber lattice supports as an equivalent to the springs of existing vibrati.on isolators underneath the PAB supply fan RA-17-089 The NRC staff approves use of the 2007 Edition through 2008 Addenda of the ASME Code, Section XI, for activities related to repair/replacement, pressure testing, and NOE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi intervals at IP-3, which is scheduled*
Amendment 19 is based on a review of documents potentially affecting the Current Licensing Basis (CLB) during the periods of September 1, 2016 through August 31, 2017.
The review concluded that certain sections of the LRA are affected by changes to CLB documents and other related LRA reviews. The table below summarizes the changes listing the affected system (if applicable), an explanation of the change (including effect on the LRA), and the affected LRA section.
Affected LRA Sections Change                   LRA Section Affected IP2 - EC 38036                           Table 3.3.2-19-4-IP2 Review ER IP2-05-15107 and develop new ECR/EC to install long radius coated elbows at the steam jet air ejector. REF ECR 13994 and TEMP MOD 37924 for work accomplished on 21 SJE A IP2 - EC 53505                           Table 2.3.3-2-1P2 Table 3.3.2-2-IP2 Base EC for IP2 EOG cooler rupture disk installation IP2 - EC 53509                           Table 2.3.3-2-IP3 Table 3.3.2-2-IP3 Base EC for IP3 EOG cooler rupture .
disk installation
 
NL-17-157                                     Page 2 of 16 Dockets 50-247 and 50-286 Attachment 1 Change                   LRA Section Affected IP3 - EC 59290                           Table 2.4-4 Section 3.5.2.1.4 Evaluate the use of rubber lattice       Section 3.5.2.2.2.6 supports as an equivalent to the         Table 3.5.1 springs of existing vibrati.on isolators Table 3.5.2-4 underneath the PAB supply fan RA-17-089                               A.3.1.17 B.1.18 The NRC staff approves use of the 2007 Edition through 2008 Addenda of the ASME Code, Section XI, for activities related to repair/replacement, pressure testing, and NOE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi intervals at IP-3, which is scheduled*
to end on July 20, 2019. (Ref. Relief request EN-ISl-16-1).
to end on July 20, 2019. (Ref. Relief request EN-ISl-16-1).
NL-16-065
NL-16-065
* Entergy notified the NRC staff of the application of the latest edition and addenda of the ASME Code (2007/2008 Addenda) for the fifth 120 month interval at IP-2 which began on June 1, 2016. CR-IP2-2017-4851 Nl-12-190 added com12onents to Table 3.3.2-13-IP3 related to EC 38047 (IP2) instead of 3.3.2-t3-IP2.
* A.2.1.17 B.1.18 Entergy notified the NRC staff of the application of the latest edition and addenda of the ASME Code (2007/2008 Addenda) for the fifth 120 month interval at IP-2 which began on June 1, 2016.
CR-IP2-2017-4851                         Table 2.3.3-13 IP3 Table 3.3.2-13-IP3 Nl-12-190 added com12onents to Table 3.3.2-13-IP3 related to EC 38047 (IP2) instead of 3.3.2-t3-IP2.
NL-13-131 added these components to Table 3.3.2-13-IP2 but neglected to delete them from Table 3.3.2-13-IP3.
NL-13-131 added these components to Table 3.3.2-13-IP2 but neglected to delete them from Table 3.3.2-13-IP3.
NL-13-152 determined that these components were not within the scope of license renewal, but did not delete them from Table 3.3.2-13-IP3.
NL-13-152 determined that these components were not within the scope of license renewal, but did not delete them from Table 3.3.2-13-IP3.
Page 2 of 16 LRA Section Affected Table 2.4-4 Section 3.5.2.1.4 Section 3.5.2.2.2.6 Table 3.5.1 Table 3.5.2-4 A.3.1.17 B.1.18 A.2.1.17 B.1.18 Table 2.3.3-13 IP3 Table 3.3.2-13-IP3 NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Change CR-IP2-2017-4851 During update of AMRRS and Annual Update preparation, it was noted that additional minor changes to the material content of the LRA were required for submittal to the NRC. ) Page 3 of 16 LRA Section Affected Table 3.4.2-5-4-IP2 8.1.27 8.1.29 A.2.1.28 A.2.1.39 NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Page 4 of 16 IPEC LRA changes are shown below. (Changes are shown as strikethroughs for deletions and underlines for additions)
 
Table 3.3.2-19-4 Condensate System Nonsafety-Related Components Potentially Affecting Safety Functions ummary o ,gmg anagemen ev1ew S fA. M tR . Table 3.3.2-19-4-IP2:
NL-17-157                                    Page 3 of 16 Dockets 50-247 and 50-286 Attachment 1 Change                  LRA Section Affected Table 3.4.2-5-4-IP2 CR-IP2-2017-4851 8.1.27 8.1.29 During update of AMRRS and Annual A.2.1.28 Update preparation, it was noted that A.2.1.39 additional minor changes to the material content of the LRA were required for submittal to the NRC.
Condensate System Component Intended Aging Effect Aging NUREG-Type Function Material Environment Requiring Management 1801 Vol. Management Programs 2 Item Pressure Metal with Loss of coating Coating integrity  
                        )
---Piping boundary internal Steam (int) integrity coating Table 2.3.3-2-IP2 Service Water System Components Subject to Aging Management Review Component Type Intended Function(s)
 
Rupture disc Pressure boundary Table 1 Item ---Notes E NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP2 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP2:
NL-17-157                                                         Page 4 of 16 Dockets 50-247 and 50-286 Attachment 1 IPEC LRA changes are shown below.
Service Water System Component Intended Aging Effect Aging Management Type Function Material Environment Requiring Programs Management Rugture disc Pressure Nickel allo~ Raw water (int) Loss of material Service Water boundar~ lntegrit~
(Changes are shown as strikethroughs for deletions and underlines for additions)
Rugture disc Pressure Nickel allo~ Condensation Loss of material External Surfaces boundar~ (ext) Monitoring Table 2.3.3-2-IP3 Service Water System Components Subject to Aging Management Review Component Type Intended Function(s)
Table 3.3.2-19-4 Condensate System Nonsafety-Related Components Potentially Affecting Safety Functions Summary ofA.  ,gmg Managemen tRev1ew  .
Ru12ture disc Pressure boundary Page 5 of 16 NUREG-Table 1 1801 Vol. 2 Item Notes Item VII.C1-13 3.3.1-78 6 (AP-53) ----G NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP3 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP3:
Table 3.3.2-19-4-IP2: Condensate System Aging Effect         Aging           NUREG-Component      Intended                                                                                      Table 1 Material     Environment         Requiring       Management         1801 Vol.           Notes Type        Function                                                                                        Item Management         Programs           2 Item Pressure Metal with                     Loss of coating Coating integrity   ---          ---       E Piping                       internal     Steam (int)     integrity boundary coating Table 2.3.3-2-IP2 Service Water System Components Subject to Aging Management Review Component Type               Intended Function(s)
Service Water System Component Type Rugture disc Rugture disc Intended Function Material Pressure Nickel allo~ boundar~ Pressure Nickel allo~ bounda!Y Aging Effect Environment Requiring Management Raw water (int) Loss of material Condensation Loss of material (ext) Table 2.4-4 Bulk Commodities Aging Management Programs Service Water lntegrit~
Rupture disc                 Pressure boundary
External Surfaces Monitoring Com onents Sub*ect to A ement Review Component Other Materials Page 6 of 16 NUREG-Table 1 1801 Vol. 2 Item Item VII.C1-13 3.3.1-78 (AP-53) ----Vibration isolators
 
* Support for Criterion (a)(3) equipment Notes 8. G 3.5.2.1.4 Bulk Commodities NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Aging Effects Requiring Management The following aging effects associated with bulk commodities require management.
NL-17-157                                                     Page 5 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP2 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP2: Service Water System Aging Effect                        NUREG-Component         Intended                                                     Aging Management               Table 1 Material     Environment       Requiring                       1801 Vol. 2          Notes Type          Function                                                          Programs                   Item Management                           Item Rugture disc     Pressure     Nickel allo~   Raw water (int)   Loss of material Service Water     VII.C1-13    3.3.1-78  6 boundar~                                                       lntegrit~         (AP-53)
Rugture disc     Pressure     Nickel allo~   Condensation     Loss of material External Surfaces --          --        G boundar~                   (ext)                             Monitoring Table 2.3.3-2-IP3 Service Water System Components Subject to Aging Management Review Component Type               Intended Function(s)
Ru12ture disc               Pressure boundary
 
NL-17-157                                                           Page 6 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP3 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP3: Service Water System Aging Effect                              NUREG-Component         Intended                                                        Aging Management                    Table 1 Material      Environment        Requiring                            1801 Vol. 2            Notes Type           Function                                                              Programs                      Item Management                                Item Rugture disc     Pressure       Nickel allo~   Raw water (int)   Loss of material   Service Water        VII.C1-13  3.3.1-78  8.
boundar~                                                          lntegrit~            (AP-53)
Rugture disc    Pressure      Nickel allo~  Condensation     Loss of material   External Surfaces    --          --        G bounda!Y                      (ext)                               Monitoring Table 2.4-4 Bulk Commodities Com onents Sub*ect to A                 ement Review Component Other Materials Vibration isolators
* Support for Criterion (a)(3) equipment
 
NL-17-157                                                         Page 7 of 16 Dockets 50-247 and 50-286 Attachment 1 3.5.2.1.4 Bulk Commodities Aging Effects Requiring Management The following aging effects associated with bulk commodities require management.
* cracking
* cracking
* cracking/delamination
* cracking/delamination
Line 63: Line 87:
* loss of material
* loss of material
* Reduction or loss of isolation function
* Reduction or loss of isolation function
* separation 3.5.2.2.2.6 Aging of Supports Not Covered by Structures Monitoring Program Page 7 of 16 (3) Reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports The IPEC aging management review did not identify any eomponent support strueture/aging effeet eombination eorresponding to NUREG 1801 Volume 2 Item III.B4.2 a. NUREG-1801 Item 111.84.2-a discusses vibration isolation elements and aging effect/mechanism:
* separation 3.5.2.2.2.6 Aging of Supports Not Covered by Structures Monitoring Program (3) Reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports The IPEC aging management review did not identify any eomponent support strueture/aging effeet eombination eorresponding to NUREG 1801 Volume 2 Item III.B4.2 a.
Reduction or Loss of Isolation Function due to Radiation Hardening, Temperature, Humidity, and Sustained Vibratory Loading. The IPEC Structural Monitoring Program manages reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports.
NUREG-1801 Item 111.84.2-a discusses vibration isolation elements and aging effect/mechanism: Reduction or Loss of Isolation Function due to Radiation Hardening, Temperature, Humidity, and Sustained Vibratory Loading. The IPEC Structural Monitoring Program manages reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports.
NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Page 8 of 16 Table 3.5.1: Containment, Structures and Component Supports, NUREG-1801 Item Aging Effect/ Aging Further Number Component Mechanism Management Evaluation Discussion Programs Recommended 3.5.1-41 Vibration Reduction or loss Structures Yes, if not within Ne 1 1il3FatieR iselatieR isolation of isolation Monitoring the scope of the elemeRts at IPeG aFe iR elements function/
 
Program applicant's see13e aREl s1;11ajeet te agiRg radiation structures maRagemeRt r:eview. The hardening, monitoring Structures Monitoring*
NL-17-157                                                               Page 8 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.5.1: Containment, Structures and Component Supports, NUREG-1801 Aging              Further Item                     Aging Effect/
temperature, program Program is used to manage humidity, C the listed aging effects. sustained vibratory loading ** Table 3.5.2-4: Bulk Commodities Structure and/or Aging Effect Aging Component or Intended Requiring Management NUREG-Table 1 Commodity Function Material Environment Management Program 1801 Item Item Notes Reduction or loss of isolation function/
Component                         Management           Evaluation               Discussion Number                      Mechanism Programs         Recommended 3.5.1-41       Vibration   Reduction or loss     Structures       Yes, if not within     Ne 11il3FatieR iselatieR isolation       of isolation     Monitoring       the scope of the     elemeRts at IPeG aFe iR elements         function/         Program           applicant's     see13e aREl s1;11ajeet te agiRg radiation                           structures       maRagemeRt r:eview. The hardening,                             monitoring         Structures Monitoring*
Vibration Air-indoor radiation Structures 111.84-12 SRE Elastomers hardening, 3.5.1-41 8. isolators uncontrolled Monitoring (T-31) tern 12erature, humidity, sustained vibratory loadina NL-17-157 Dockets 50-247 and 50-286 Attachment 1 B.1.18 INSERVICE INSPECTION Program Description Page 9 of 16 The lnservice Inspection (ISi) Program is an existing program that en'compasses ASME Section XI, Subsections IWA, IWB, IWC, IWD and IWF requirements.
temperature,                             program       Program is used to manage C
On March 1, 2007, IP2 entered the fourth ISi interval and on July 21, 2009 IP3 entered the fourth ISi interval.
humidity,                                               the listed aging effects.
The ASME code edition and addenda used for the IP2 and IP3 fourth fifth interval is the 2004-7 Edition, 200~ Addenda. The ASME code edition and addenda used for the remainder of the IP3-fourth interval is the 2008 Edition, 2009 Addenda. A.2.1.17 lnservice Inspection  
sustained vibratory loading
-lnservjce Inspection (ISi) Program On June 1, 2016March 1, 2007, IP2 entered the fifth ISi interval.
* Table 3.5.2-4:         Bulk Commodities Structure and/or                                         Aging Effect         Aging Component or     Intended                               Requiring       Management     NUREG-       Table 1 Commodity       Function   Material   Environment   Management         Program     1801 Item       Item       Notes Reduction or loss of isolation function/
The ASME code edition and addenda used for the few:tR. fifth interval is the 2004-Z Edition with 200J§. addenda. A.3.1.17 lnservice Inspection  
radiation Vibration                               Air-indoor                     Structures   111.84-12 isolators SRE     Elastomers uncontrolled hardening, Monitoring    (T-31) 3.5.1-41       8.
-lnservice Inspection (ISi) Program On July 21, 2009, IP3 entered the fourth ISi interval.
tern 12erature, humidity, sustained vibratory loadina
The ASME code edition and addenda used for the fourth interval is the 2001 Edition 2003 Addenda. The NRC staff approved use of the 2007 Edition through 2008 Addenda of the ASME Code, Section XI, for activities related to repair/ replacement, pressure testing, and NDE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi interval at IP3, which is scheduled to end on July 20, 2019.
 
NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Table 2.3.3-13-IP3 Fuel Oil Components Subject to Aging Management Review Component Type Intended Function Fle*iele ee11e,<'1S PFess1:1re 13e1:1RaafY Fleat e*sl=laRgeF (13eRRet)
NL-17-157                                                       Page 9 of 16 Dockets 50-247 and 50-286 Attachment 1 B.1.18 INSERVICE INSPECTION Program Description The lnservice Inspection (ISi) Program is an existing program that en'compasses ASME Section XI, Subsections IWA, IWB, IWC, IWD and IWF requirements.
PFeSSl:IFe 891:lRSaFy Fleat e*sl=laRgeF (t1:113es)
On March 1, 2007, IP2 entered the fourth ISi interval and on July 21, 2009 IP3 entered the fourth ISi interval. The ASME code edition and addenda used for the IP2 and IP3 fourth fifth interval is the 2004-7 Edition, 200~ Addenda. The ASME code edition and addenda used for the remainder of the IP3-fourth interval is the 2008 Edition, 2009 Addenda.
PFeSSl:IFe Be1:1RaaFy Fleat tFaRSfeF SileRSeF PFeSSl:IFe 891:lRSafY  
A.2.1.17 lnservice Inspection - lnservjce Inspection (ISi) Program On June 1, 2016March 1, 2007, IP2 entered the ~ fifth ISi interval. The ASME code edition and addenda used for the few:tR. fifth interval is the 2004-Z Edition with 200J&sect;. addenda.
+l:IF89SRaFgeF PFeSSl:IFe 891:lRSaFy Page 10 of 16 NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3 Fuel Oil Systems Summary of Aging Management Review Table 3.3.2-13-IP3:
A.3.1.17 lnservice Inspection - lnservice Inspection (ISi) Program On July 21, 2009, IP3 entered the fourth ISi interval. The ASME code edition and addenda used for the fourth interval is the 2001 Edition 2003 Addenda.
Fuel Oil Systems Component Intended Aging Effect Aging Type Function Material Environment Requiring Management Management Programs Filter housing Pressure Carbon steel Air indoor (int) Loss of material External Surfaces bounsary Monitoring Flexible Pressure Stainless Air insoor (ext) Nooe Nooe bello\*.is bounsary steel-Flexible Pressure Stainless Exhaust gas (int) Cracking fatigue Periosic Surveillance bellows bounsary steel-ans Pre1.ienti1.ie Maintenance Flmcible Pressure Stainless Exhaust gas (int) Loss of material Periosic SuF\'eillance bellows bounsary
The NRC staff approved use of the 2007 Edition through 2008 Addenda of the ASME Code, Section XI, for activities related to repair/
* steel-ans Preventive Maintenance Heat Pressure Carbon steel Air insoor (ext) Loss of material External Surfaces exchanger boundary Monitoring (bonRet) Heat Pressure CarboR steel Treates water Loss of material IJ\Jater Chemistry e:>cchaRger bOURSary ) fiRtt CoRtrol Closes (bonRet) CooliRg \ft.later Page 11 of 16 -NUREG-Table 1 1801 Vol. Item Notes 2 Item "B 1 (E Ir. 3.2.1 32 e 2at VII.J 1&sect; 3.3.1 94 A (AP 17) --H VII.H2 2 (A 3.3.1 18 e 2+t VII.I 8 (A 3.3.1 &sect;8 A VII.C2 1 (A 3.3.1 48 g NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3:
replacement, pressure testing, and NDE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi interval at IP3, which is scheduled to end on July 20, 2019.
Fuel Oil Systems Component Intended Aging Effect Type,r Function Material -Environment Requiring Management Meat Heat transfer Go1313er alloy Air indoor (met) Fouling exohanger
 
> 15% zn (tubes) Meat Heat transfer Go1313er alloy Treated water Fouling exehanger
NL-17-157                                       Page 10 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 2.3.3-13-IP3 Fuel Oil Components Subject to Aging Management Review Component Type               Intended Function Fle*iele ee11e,<'1S           PFess1:1re 13e1:1RaafY Fleat e*sl=laRgeF (13eRRet)   PFeSSl:IFe 891:lRSaFy Fleat e*sl=laRgeF (t1:113es) PFeSSl:IFe Be1:1RaaFy Fleat tFaRSfeF SileRSeF                     PFeSSl:IFe 891:lRSafY
> 15% zn (tubes) Meat Pressure Go1313er alloy I\. nlr indoor (ext) Nooe exehanger boundary > 15% zn (tubes) Meat Pressure Go1313er alloy Treated 1.vater Loss of material exohanger boundary > 15% zn (tubes) Meat Pressure Go1313er alloy Treated water Loss of material exehanger boundary > 15% zn (tubes) Pressure Garbon steel Treated \Nater Loss of material boundary Pressure Garbon steel Exhaust gas (int) Loss of material boundary Page 12 of 16 Aging NUREG-Table 1 Management 1801 Vol. Item Notes Programs 2 Item Per1odie Surveillanee
    +l:IF89SRaFgeF               PFeSSl:IFe 891:lRSaFy
--G and Preventi,.*e Maintenanee  
 
\11..!ater Ghemistry VII.G22 3.3.1 52 g Gontrol Glosed (AP 80) Gooling \II.tater Nooe VF 3 (EP 32.1 53 G 4-0} -Seleetive Leashing VII.H1 4 3.3.1 84 G (AP 43) lJVater Ghemistry VII.E1 2 3.3.1 51 g Gontrol Glosed (AP 34) Gooling Water lJVater Ghemist~*
NL-17-157                                                                 Page 11 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3 Fuel Oil Systems Summary of Aging Management Review Table 3.3.2-13-IP3: Fuel Oil Systems
VII.H2 23 3.3.1 47 g Gontrol Glosed (Mat GooliRg VI.tater Periodie SuFVeillanee VII.H2 2 (A 3.3.1 18 E-and Preventive 2+} Maintenanee NL-17-157 Dockets 50-247 and 50-286 Attachment 1 ,-, Table 3.3.2-13-IP3:
                                                                                                        -
Fuel Oil Systems Component Intended Aging Effect Type Function Material Environment Requiring Management Pi=ess1:1Fe CaFbon steel 6" , ,IF indooF (int) Loss of mateFial bo1:1ndaFy PFess1:1Fe Al1:1min1:1m AiF indooF (ext) Nooe bo1:1ndaicy PFeSSl:IFe Al1:1min1:1m AiF indOOF (int) Nooe bo1:1ndaicy SileneeF PFeSSl:IFe CaFbon steel 6" , ,IF indooF (ext) Loss of mateFial bo1:1ndaFy SileneeF PFeSSl:IFe CaFbon steel Exha1:1st gas (int) Loss of mateFial bo1:1ndary SileneeF PFeSSl:IFe CaFbon steel Exha1:1st gas (int) Craekin&sect; fati&sect;1:1e bo1:1ndaFy T1:1FboehaFgm PFeSSl:IFe Gray east I\. nlF indooF (ext) Loss of mateFial bo1:1ndary ifon. TmboehaFgeF PFeSSl:IFe Gray east AiF indooF (int) Loss of matmial bo1:1ndaicy ifon. Page 13 of 16 Aging NUREG-Table 1 Management 1801 Vol. Item Notes Programs 2 Item Extemal Sm:faees VJ\ 19(E 3.2.1 32 e MonitoFin&sect; 2-9* Nooe V.F 2 (EP 3.2.1 50 G Nooe V.F 2 (EP 3.2.1 50 G External S1:1Ffaees VII.I 8 (A 3.3.1 58 A
Aging Effect             Aging             NUREG-Component      Intended                                                                                                  Table 1 Material     Environment         Requiring         Management             1801 Vol.                Notes Type      Function                                                                                                    Item Management             Programs               2 Item Filter housing Pressure     Carbon steel   Air indoor (int)   Loss of material External Surfaces       "B Ir. 1 (E    3.2.1 32  e bounsary                                                         Monitoring               2at Flexible       Pressure     Stainless     Air insoor (ext)   Nooe             Nooe                     VII.J 1&sect;        3.3.1 94  A bello\*.is      bounsary     steel-                                                                       (AP 17)
* MonitoFin&sect; PeFiodie S1:1FVeillanee VII.H2 2 (A 3.3.1 18 e and PFeventi1.ie 27t Maintenanee PeFiodie S1:1FVeillanee
Flexible       Pressure     Stainless     Exhaust gas (int)   Cracking fatigue Periosic Surveillance   -              -        H bellows       bounsary     steel-                                             ans Pre1.ienti1.ie Maintenance Flmcible       Pressure     Stainless     Exhaust gas (int)   Loss of material Periosic SuF\'eillance   VII.H2 2 (A    3.3.1 18  e bellows        bounsary
--M and Pi=eventive Maintenanee Extemal S1:1Ffaees VII.I 8 (A 3.3.1 58 A MonitoFing -' Extemal S1:1Ffaees H 6 19 (E ,., ' 3.2.1 32 e MonitoFin&sect;
* steel-                                             ans Preventive           2+t Maintenance Heat           Pressure     Carbon steel   Air insoor (ext)   Loss of material External Surfaces       VII.I 8 (A      3.3.1 &sect;8  A exchanger     boundary                                                         Monitoring               ~
~.
(bonRet)
NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Page 14 of 16 Table 3.3.2-13-IP3:
Heat           Pressure     CarboR steel   Treates water       Loss of material IJ\Jater Chemistry       VII.C2 1 (A    3.3.1 48  g e:>cchaRger   bOURSary )                   fiRtt                               CoRtrol Closes           ~
Fuel Oil Systems Component Intended Type Function Turbocharger Pressure boundary Turbocharger Pressure boundary B.1.27 One-Time Inspection Program Description Material Aluminum Aluminum Environment A" nlr indoor (int) Exhaust gas (int) -Aging Effect Aging NUREG-Table 1 Requiring Management 1801 Vol. Management Programs 2 Item Item Nooe Nooe V.F 2 (EP 3.2.1 50 Loss of material Periodic Surveillance
(bonRet)                                                                         CooliRg \ft.later
--and Preventive Maintenance
 
* Internal surfaces of the IP2 instrument air system stainless steel or aluminum tubing and valve bodies containing condensation B.1.29 Periodic Surveillance and Preventive Maintenance Program Description Condensate system Use visual or NOE techniques to inspect a representative sample of the internal surfaces of the main condenser tubes exposed to raw water (internal) and expansion joints exposed to treated water and indoor air to manage cracking, loss of material, aREi change in materials properties, and fouling. Notes G G NL-17-157 Dockets 50-247 and 50-286 Attachment 1 Page 15 of 16 Table 3.4.2-5-4-IP2 City Water System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review rTable 3.4.2-5-4-IP2 City Water System (CYW) -Component Intended , Aging Effect Aging Management NUREG-Type Function Material Environment Requiring Programs 1801 Vol. 2 Management Item Copper Pressure Strainer housing alloy >15% Air indoor (ext) Nooe Nooe (EP 10) eoundary iffi Periodic -Copper Pressure Treated water Surveillance and Strainer housing alloy >15% Loss of material eoundary Preventi11e iffi Maintenance A.2.1.28 Periodic Surveilh:mce and Preventive Maintenance Program Table 1 Item 3.2.1 53 -Notes G G, 407 Surveillance testing and periodic inspections using visual or other non-destructive examination techniques verify that the following components are capable of performing their intended function.
NL-17-157                                                          Page 12 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect              Aging        NUREG-Component      Intended                                                                                              Table 1 Material        -Environment      Requiring            Management        1801 Vol.             Notes Type,r      Function                                                                                                Item Management              Programs        2 Item Meat            Heat transfer Go1313er alloy  Air  indoor (met) Fouling          Per1odie Surveillanee -            -        G exohanger                    > 15% zn                                            and Preventi,.*e (tubes)                                                                            Maintenanee Meat            Heat transfer Go1313er alloy  Treated water    Fouling          \11..!ater Ghemistry  VII.G22      3.3.1 52  g exehanger                    > 15% zn        ~                                  Gontrol Glosed        (AP 80)
o chlorination, circulating water, city water, intake structure system, emergency diesel generator, fresh water cooling, instrument air, integrated liquid waste handling, lube oil, miscellaneous, radiation monitoring, river water, station air, waste disposal, wash water, and water treatment plant system piping, piping components, and piping elements .---
(tubes)                                                                          Gooling \II.tater I\.
NL-17-157 Dockets 50-247 and 50-286 Attachment 1 A.2.1.39 Water Chemistry Control -Closed Cooling Water Program Page 16 of 16 The Water Chemistry Control -Closed Cooling Water Program is an existing program that includes preventive measures that manage loss of material, cracking, or fouling for components in closed cooling water systems (component cooling water (CCW), instrument air (IP2 only), fresh '1Jater cooling, conventional closed cooling (CCC), instrument air closed cooling (IACC), emergency.
Meat          Pressure      Go1313er alloy  nlr  indoor (ext) Nooe            Nooe                  VF 3 (EP    32.1 53  G exehanger      boundary      > 15% zn                                                                  4-0}
diesel generator cooling, security generator cooling, station air (IP1) cooling and SBO/Appendix R diesel generator cooling).
(tubes)
These chemistry activities provide for monitoring and controlling closed cooling water chemistry using procedures and processes based on EPRI guidance for closed cooling water chemistry.}}
                                                                                  -
Meat          Pressure      Go1313er alloy  Treated 1.vater  Loss of material Seleetive Leashing    VII.H1 4    3.3.1 84  G exohanger      boundary      > 15% zn        ~                                                        (AP 43)
(tubes)
Meat          Pressure      Go1313er alloy   Treated water    Loss of material lJVater Ghemistry      VII.E1 2    3.3.1 51  g exehanger      boundary      > 15% zn         ~                                  Gontrol Glosed        (AP 34)
(tubes)                                                                           Gooling Water
~              Pressure       Garbon steel    Treated \Nater    Loss of material lJVater Ghemist~*      VII.H2 23    3.3.1 47  g boundary                       ~                                  Gontrol Glosed        (Mat GooliRg VI.tater
~              Pressure       Garbon steel     Exhaust gas (int) Loss of material Periodie SuFVeillanee  VII.H2 2 (A  3.3.1 18  E-boundary                                                          and Preventive        2+}
Maintenanee
 
NL-17-157                                                                    Page 13 of 16 Dockets 50-247 and 50-286 Attachment 1
                                                    ,-,
Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect              Aging              NUREG-Component        Intended                                                                                                    Table 1 Material        Environment        Requiring            Management            1801 Vol.              Notes Type        Function                                                                                                      Item Management              Programs              2 Item
~              Pi=ess1:1Fe  CaFbon steel  ,6",IF indooF (int) Loss of mateFial    Extemal Sm:faees        VJ\ 19(E      3.2.1 32  e bo1:1ndaFy                                                            MonitoFin&sect;              2-9*
~              PFess1:1Fe  Al1:1min1:1m  AiF    indooF (ext)  Nooe                Nooe                    V.F 2 (EP      3.2.1 50  G bo1:1ndaicy                                                                                    ~
~              PFeSSl:IFe    Al1:1min1:1m  AiF    indOOF (int) Nooe                Nooe                    V.F 2 (EP      3.2.1 50  G bo1:1ndaicy                                                                                    ~
SileneeF      PFeSSl:IFe    CaFbon steel  ,6",IF indooF (ext)  Loss of mateFial    External S1:1Ffaees    VII.I 8 (A    3.3.1 58  A bo1:1ndaFy
* MonitoFin&sect;              ~
SileneeF        PFeSSl:IFe  CaFbon steel    Exha1:1st gas (int) Loss of mateFial    PeFiodie S1:1FVeillanee VII.H2 2 (A    3.3.1 18 e bo1:1ndary                                                            and PFeventi1.ie        27t Maintenanee SileneeF      PFeSSl:IFe    CaFbon steel  Exha1:1st gas (int)  Craekin&sect; fati&sect;1:1e  PeFiodie S1:1FVeillanee -             -         M bo1:1ndaFy                                                            and Pi=eventive Maintenanee I\.
T1:1FboehaFgm  PFeSSl:IFe    Gray east      nlF    indooF (ext) Loss of mateFial     Extemal S1:1Ffaees      VII.I 8 (A    3.3.1 58  A bo1:1ndary    ifon.                                                    MonitoFing              ~
                                                                                                                  -
                                                                                                                      '
TmboehaFgeF    PFeSSl:IFe    Gray east      AiF   indooF (int) Loss of matmial      Extemal S1:1Ffaees
                                                                                                      ~.
H,.,6' 19 (E  3.2.1 32  e bo1:1ndaicy   ifon.                                                    MonitoFin&sect;              ~
 
NL-17-157                                                            Page 14 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect            Aging            NUREG-Component        Intended                                                                                            Table 1 Material    Environment          Requiring          Management          1801 Vol.            Notes Type        Function                                                                                              Item Management            Programs            2 Item A"
Turbocharger    Pressure      Aluminum    nlr  indoor (int) Nooe              Nooe                  V.F 2 (EP    3.2.1 50  G boundary                                                                                ~
Turbocharger    Pressure      Aluminum    Exhaust gas (int)   Loss of material  Periodic Surveillance -            -        G boundary                                                          and Preventive Maintenance B.1.27 One-Time Inspection Program Description
                                                    -
* Internal surfaces of the IP2 instrument air system stainless steel or aluminum tubing and valve bodies containing condensation B.1.29 Periodic Surveillance and Preventive Maintenance Program Description Condensate system              Use visual or NOE techniques to inspect a representative sample of the internal surfaces of the main condenser tubes exposed to raw water (internal) and expansion joints exposed to treated water and indoor air to manage cracking, loss of material, aREi change in materials properties, and fouling.
 
NL-17-157                                                          Page 15 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.4.2-5-4-IP2 City Water System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review
                                                                                                                  -
rTable 3.4.2-5-4-IP2 City Water System (CYW)
                                                                  , Aging Effect                          NUREG-Component        Intended                                                      Aging Management                        Table 1 Material    Environment          Requiring                            1801 Vol. 2             Notes Type          Function                                                          Programs                            Item Management                              Item Copper                                                                ~                3.2.1 53 G Pressure Strainer housing                alloy >15% Air indoor (ext)      Nooe            Nooe                  (EP 10) eoundary iffi Copper Periodic                    -               -   G, 407 Pressure                  Treated water                        Surveillance and Strainer housing                alloy >15%                      Loss of material eoundary iffi
                                              ~                                    Preventi11e Maintenance A.2.1.28 Periodic Surveilh:mce and Preventive Maintenance Program Surveillance testing and periodic inspections using visual or other non-destructive examination techniques verify that the following components are capable of performing their intended function.
o  chlorination, circulating water, city water, intake structure system, emergency diesel generator, fresh water cooling, instrument air, integrated liquid waste handling, lube oil, miscellaneous, radiation monitoring, river water, station air, waste disposal, wash water, and water treatment plant system piping, piping components, and piping elements                  .---
 
NL-17-157                                                      Page 16 of 16 Dockets 50-247 and 50-286 Attachment 1 A.2.1.39 Water Chemistry Control - Closed Cooling Water Program The Water Chemistry Control - Closed Cooling Water Program is an existing program that includes preventive measures that manage loss of material, cracking, or fouling for components in closed cooling water systems (component cooling water (CCW),
instrument air (IP2 only), fresh '1Jater cooling, conventional closed cooling (CCC), instrument air closed cooling (IACC), emergency.
diesel generator cooling, security generator cooling, station air (IP1) cooling and SBO/Appendix R diesel generator cooling). These chemistry activities provide for monitoring and controlling closed cooling water chemistry using procedures and processes based on EPRI guidance for closed cooling water chemistry.}}

Latest revision as of 07:47, 22 October 2019

Amendment 19 to License Renewal Application (LRA)
ML17360A157
Person / Time
Site: Indian Point, Fort Calhoun  Entergy icon.png
Issue date: 12/14/2017
From: Vitale A
Entergy Nuclear Northeast
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
NL-17-157
Download: ML17360A157 (19)
v • d • e


Text

)

A Entergy Nuclear Northeast Indian Point Energy Center

-===* Entergx 450 Broadway, GSB P.O. Box 249 Buchanan, NY 10511-0249 Tel (914) 254-2055 Anthony J Vitale Site Vice President NL-17-157 December 14, 2017 U.S. Nuclear Regulatory Commission Document Control Desk 11545 Rockville Pike, TWFN-2 F1 Rockville, MD 20852-2738

SUBJECT:

Amendment 19 to License Renewal Application (LRA)

Indian Point Nuclear Generating Unit Nos. 2 and 3 Docket Nos. 50-247 and 50-286 License Nos. DPR-26 and DPR-64

REFERENCES:

1. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application" (NL-07-039)
2. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Boundary Drawings" (NL-07-040)
3. Entergy Letter dated April 23, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Application Environmental Report References"
4. Entergy Letter dated October 11, 2007, F. R. Dacimo to Document Control Desk, "License Renewal Applicat'ion (LRA)" (NL-07-124)
5. Entergy Letter dated November 14, 2007, F. R. Dacimo to Document Control Desk, "Supplement to License Renewal Application (LRA)

Environmental Report References" (NL-07-133)

Dear Sir or Madam:

In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRG review, an amendment to the renewal application must be submitted that identifies any change to the CLB of the facility that materially affects the contents of the license renewal application (LRA), including the FSAR supplement. In the referenced letters, Entergy Nuclear Operations, Inc. applied for ~enewal of the Indian Point Nuclear Generating Units 2 and 3 operating licenses. This letter provides Amendment 19 of the Indian Point Units 2 and 3 license renewal application.

There are no new commitments being made in this submittal.

Should you have any questions concerning this report, please contact Mr. Robert W. Walpole, Licensing Manager, at (914) 254-6710.

NL-17-157 Dockets 50-24 7 and 50-286 Page 2 of 2 I declare under penalty of perjury that the foregoing is true and correct. Executed on 12..-11-r~ ,2011.

Sincerely, AJV/rl Attachment 1. Annual Update Amendment cc: Mr. David C. Lew, Regional Administrator, NRC Region I Mr. William Burton, Senior Project Manager, NRC DLR Mr. Richard V. Guzman, Senior Project Manager, NRC NRR DORL Ms. Bridget Frymire, New York State Department of Public Service Ms. Alicia Barton, President and CEO NYSERDA NRC Resident Inspector's Office

ATTACHMENT 1 TO NL-17-157 ANNUAL AMENDMENT ENTERGY NUCLEAR OPERATIONS, INC.

INDIAN POINT NUCLEAR GENERATING UNIT NOS. 2 and 3 DOCKET NO. 50-247 and 50-286

NL-17-157 Page 1 of 16 Dockets 50-247 and 50-286 Attachment 1 INDIAN POINT NUCLEAR GENERATING UNIT Nos. 2 AND 3 LICENSE RENEWAL APPLICATION ANNUAL AMENDMENT In accordance with 10 CFR 54.21 (b), each year following submittal of the license renewal application and at least 3 months before scheduled completion of the NRC review, an amendment

  • to the renewal application must be submitted that identifies any change to the CLB of the facility

Amendment 19 is based on a review of documents potentially affecting the Current Licensing Basis (CLB) during the periods of September 1, 2016 through August 31, 2017.

The review concluded that certain sections of the LRA are affected by changes to CLB documents and other related LRA reviews. The table below summarizes the changes listing the affected system (if applicable), an explanation of the change (including effect on the LRA), and the affected LRA section.

Affected LRA Sections Change LRA Section Affected IP2 - EC 38036 Table 3.3.2-19-4-IP2 Review ER IP2-05-15107 and develop new ECR/EC to install long radius coated elbows at the steam jet air ejector. REF ECR 13994 and TEMP MOD 37924 for work accomplished on 21 SJE A IP2 - EC 53505 Table 2.3.3-2-1P2 Table 3.3.2-2-IP2 Base EC for IP2 EOG cooler rupture disk installation IP2 - EC 53509 Table 2.3.3-2-IP3 Table 3.3.2-2-IP3 Base EC for IP3 EOG cooler rupture .

disk installation

NL-17-157 Page 2 of 16 Dockets 50-247 and 50-286 Attachment 1 Change LRA Section Affected IP3 - EC 59290 Table 2.4-4 Section 3.5.2.1.4 Evaluate the use of rubber lattice Section 3.5.2.2.2.6 supports as an equivalent to the Table 3.5.1 springs of existing vibrati.on isolators Table 3.5.2-4 underneath the PAB supply fan RA-17-089 A.3.1.17 B.1.18 The NRC staff approves use of the 2007 Edition through 2008 Addenda of the ASME Code,Section XI, for activities related to repair/replacement, pressure testing, and NOE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi intervals at IP-3, which is scheduled*

to end on July 20, 2019. (Ref. Relief request EN-ISl-16-1).

NL-16-065

  • A.2.1.17 B.1.18 Entergy notified the NRC staff of the application of the latest edition and addenda of the ASME Code (2007/2008 Addenda) for the fifth 120 month interval at IP-2 which began on June 1, 2016.

CR-IP2-2017-4851 Table 2.3.3-13 IP3 Table 3.3.2-13-IP3 Nl-12-190 added com12onents to Table 3.3.2-13-IP3 related to EC 38047 (IP2) instead of 3.3.2-t3-IP2.

NL-13-131 added these components to Table 3.3.2-13-IP2 but neglected to delete them from Table 3.3.2-13-IP3.

NL-13-152 determined that these components were not within the scope of license renewal, but did not delete them from Table 3.3.2-13-IP3.

NL-17-157 Page 3 of 16 Dockets 50-247 and 50-286 Attachment 1 Change LRA Section Affected Table 3.4.2-5-4-IP2 CR-IP2-2017-4851 8.1.27 8.1.29 During update of AMRRS and Annual A.2.1.28 Update preparation, it was noted that A.2.1.39 additional minor changes to the material content of the LRA were required for submittal to the NRC.

)

NL-17-157 Page 4 of 16 Dockets 50-247 and 50-286 Attachment 1 IPEC LRA changes are shown below.

(Changes are shown as strikethroughs for deletions and underlines for additions)

Table 3.3.2-19-4 Condensate System Nonsafety-Related Components Potentially Affecting Safety Functions Summary ofA. ,gmg Managemen tRev1ew .

Table 3.3.2-19-4-IP2: Condensate System Aging Effect Aging NUREG-Component Intended Table 1 Material Environment Requiring Management 1801 Vol. Notes Type Function Item Management Programs 2 Item Pressure Metal with Loss of coating Coating integrity --- --- E Piping internal Steam (int) integrity boundary coating Table 2.3.3-2-IP2 Service Water System Components Subject to Aging Management Review Component Type Intended Function(s)

Rupture disc Pressure boundary

NL-17-157 Page 5 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP2 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP2: Service Water System Aging Effect NUREG-Component Intended Aging Management Table 1 Material Environment Requiring 1801 Vol. 2 Notes Type Function Programs Item Management Item Rugture disc Pressure Nickel allo~ Raw water (int) Loss of material Service Water VII.C1-13 3.3.1-78 6 boundar~ lntegrit~ (AP-53)

Rugture disc Pressure Nickel allo~ Condensation Loss of material External Surfaces -- -- G boundar~ (ext) Monitoring Table 2.3.3-2-IP3 Service Water System Components Subject to Aging Management Review Component Type Intended Function(s)

Ru12ture disc Pressure boundary

NL-17-157 Page 6 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-2-IP3 Service Water System Summary of Aging Management Review Table 3.3.2-2-IP3: Service Water System Aging Effect NUREG-Component Intended Aging Management Table 1 Material Environment Requiring 1801 Vol. 2 Notes Type Function Programs Item Management Item Rugture disc Pressure Nickel allo~ Raw water (int) Loss of material Service Water VII.C1-13 3.3.1-78 8.

boundar~ lntegrit~ (AP-53)

Rugture disc Pressure Nickel allo~ Condensation Loss of material External Surfaces -- -- G bounda!Y (ext) Monitoring Table 2.4-4 Bulk Commodities Com onents Sub*ect to A ement Review Component Other Materials Vibration isolators

  • Support for Criterion (a)(3) equipment

NL-17-157 Page 7 of 16 Dockets 50-247 and 50-286 Attachment 1 3.5.2.1.4 Bulk Commodities Aging Effects Requiring Management The following aging effects associated with bulk commodities require management.

  • cracking
  • cracking/delamination
  • change in material properties
  • loss of material
  • Reduction or loss of isolation function
  • separation 3.5.2.2.2.6 Aging of Supports Not Covered by Structures Monitoring Program (3) Reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports The IPEC aging management review did not identify any eomponent support strueture/aging effeet eombination eorresponding to NUREG 1801 Volume 2 Item III.B4.2 a.

NUREG-1801 Item 111.84.2-a discusses vibration isolation elements and aging effect/mechanism: Reduction or Loss of Isolation Function due to Radiation Hardening, Temperature, Humidity, and Sustained Vibratory Loading. The IPEC Structural Monitoring Program manages reduction/loss of isolation function due to degradation of vibration isolation elements for Group 84 supports.

NL-17-157 Page 8 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.5.1: Containment, Structures and Component Supports, NUREG-1801 Aging Further Item Aging Effect/

Component Management Evaluation Discussion Number Mechanism Programs Recommended 3.5.1-41 Vibration Reduction or loss Structures Yes, if not within Ne 11il3FatieR iselatieR isolation of isolation Monitoring the scope of the elemeRts at IPeG aFe iR elements function/ Program applicant's see13e aREl s1;11ajeet te agiRg radiation structures maRagemeRt r:eview. The hardening, monitoring Structures Monitoring*

temperature, program Program is used to manage C

humidity, the listed aging effects.

sustained vibratory loading

  • Table 3.5.2-4: Bulk Commodities Structure and/or Aging Effect Aging Component or Intended Requiring Management NUREG- Table 1 Commodity Function Material Environment Management Program 1801 Item Item Notes Reduction or loss of isolation function/

radiation Vibration Air-indoor Structures 111.84-12 isolators SRE Elastomers uncontrolled hardening, Monitoring (T-31) 3.5.1-41 8.

tern 12erature, humidity, sustained vibratory loadina

NL-17-157 Page 9 of 16 Dockets 50-247 and 50-286 Attachment 1 B.1.18 INSERVICE INSPECTION Program Description The lnservice Inspection (ISi) Program is an existing program that en'compasses ASME Section XI, Subsections IWA, IWB, IWC, IWD and IWF requirements.

On March 1, 2007, IP2 entered the fourth ISi interval and on July 21, 2009 IP3 entered the fourth ISi interval. The ASME code edition and addenda used for the IP2 and IP3 fourth fifth interval is the 2004-7 Edition, 200~ Addenda. The ASME code edition and addenda used for the remainder of the IP3-fourth interval is the 2008 Edition, 2009 Addenda.

A.2.1.17 lnservice Inspection - lnservjce Inspection (ISi) Program On June 1, 2016March 1, 2007, IP2 entered the ~ fifth ISi interval. The ASME code edition and addenda used for the few:tR. fifth interval is the 2004-Z Edition with 200J§. addenda.

A.3.1.17 lnservice Inspection - lnservice Inspection (ISi) Program On July 21, 2009, IP3 entered the fourth ISi interval. The ASME code edition and addenda used for the fourth interval is the 2001 Edition 2003 Addenda.

The NRC staff approved use of the 2007 Edition through 2008 Addenda of the ASME Code,Section XI, for activities related to repair/

replacement, pressure testing, and NDE of Class 1, 2, 3, MC, and CC components, component supports, and welds, for the remainder of the fourth 10-year ISi interval at IP3, which is scheduled to end on July 20, 2019.

NL-17-157 Page 10 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 2.3.3-13-IP3 Fuel Oil Components Subject to Aging Management Review Component Type Intended Function Fle*iele ee11e,<'1S PFess1:1re 13e1:1RaafY Fleat e*sl=laRgeF (13eRRet) PFeSSl:IFe 891:lRSaFy Fleat e*sl=laRgeF (t1:113es) PFeSSl:IFe Be1:1RaaFy Fleat tFaRSfeF SileRSeF PFeSSl:IFe 891:lRSafY

+l:IF89SRaFgeF PFeSSl:IFe 891:lRSaFy

NL-17-157 Page 11 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3 Fuel Oil Systems Summary of Aging Management Review Table 3.3.2-13-IP3: Fuel Oil Systems

-

Aging Effect Aging NUREG-Component Intended Table 1 Material Environment Requiring Management 1801 Vol. Notes Type Function Item Management Programs 2 Item Filter housing Pressure Carbon steel Air indoor (int) Loss of material External Surfaces "B Ir. 1 (E 3.2.1 32 e bounsary Monitoring 2at Flexible Pressure Stainless Air insoor (ext) Nooe Nooe VII.J 1§ 3.3.1 94 A bello\*.is bounsary steel- (AP 17)

Flexible Pressure Stainless Exhaust gas (int) Cracking fatigue Periosic Surveillance - - H bellows bounsary steel- ans Pre1.ienti1.ie Maintenance Flmcible Pressure Stainless Exhaust gas (int) Loss of material Periosic SuF\'eillance VII.H2 2 (A 3.3.1 18 e bellows bounsary

  • steel- ans Preventive 2+t Maintenance Heat Pressure Carbon steel Air insoor (ext) Loss of material External Surfaces VII.I 8 (A 3.3.1 §8 A exchanger boundary Monitoring ~

(bonRet)

Heat Pressure CarboR steel Treates water Loss of material IJ\Jater Chemistry VII.C2 1 (A 3.3.1 48 g e:>cchaRger bOURSary ) fiRtt CoRtrol Closes ~

(bonRet) CooliRg \ft.later

NL-17-157 Page 12 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect Aging NUREG-Component Intended Table 1 Material -Environment Requiring Management 1801 Vol. Notes Type,r Function Item Management Programs 2 Item Meat Heat transfer Go1313er alloy Air indoor (met) Fouling Per1odie Surveillanee - - G exohanger > 15% zn and Preventi,.*e (tubes) Maintenanee Meat Heat transfer Go1313er alloy Treated water Fouling \11..!ater Ghemistry VII.G22 3.3.1 52 g exehanger > 15% zn ~ Gontrol Glosed (AP 80)

(tubes) Gooling \II.tater I\.

Meat Pressure Go1313er alloy nlr indoor (ext) Nooe Nooe VF 3 (EP 32.1 53 G exehanger boundary > 15% zn 4-0}

(tubes)

-

Meat Pressure Go1313er alloy Treated 1.vater Loss of material Seleetive Leashing VII.H1 4 3.3.1 84 G exohanger boundary > 15% zn ~ (AP 43)

(tubes)

Meat Pressure Go1313er alloy Treated water Loss of material lJVater Ghemistry VII.E1 2 3.3.1 51 g exehanger boundary > 15% zn ~ Gontrol Glosed (AP 34)

(tubes) Gooling Water

~ Pressure Garbon steel Treated \Nater Loss of material lJVater Ghemist~* VII.H2 23 3.3.1 47 g boundary ~ Gontrol Glosed (Mat GooliRg VI.tater

~ Pressure Garbon steel Exhaust gas (int) Loss of material Periodie SuFVeillanee VII.H2 2 (A 3.3.1 18 E-boundary and Preventive 2+}

Maintenanee

NL-17-157 Page 13 of 16 Dockets 50-247 and 50-286 Attachment 1

,-,

Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect Aging NUREG-Component Intended Table 1 Material Environment Requiring Management 1801 Vol. Notes Type Function Item Management Programs 2 Item

~ Pi=ess1:1Fe CaFbon steel ,6",IF indooF (int) Loss of mateFial Extemal Sm:faees VJ\ 19(E 3.2.1 32 e bo1:1ndaFy MonitoFin§ 2-9*

~ PFess1:1Fe Al1:1min1:1m AiF indooF (ext) Nooe Nooe V.F 2 (EP 3.2.1 50 G bo1:1ndaicy ~

~ PFeSSl:IFe Al1:1min1:1m AiF indOOF (int) Nooe Nooe V.F 2 (EP 3.2.1 50 G bo1:1ndaicy ~

SileneeF PFeSSl:IFe CaFbon steel ,6",IF indooF (ext) Loss of mateFial External S1:1Ffaees VII.I 8 (A 3.3.1 58 A bo1:1ndaFy

  • MonitoFin§ ~

SileneeF PFeSSl:IFe CaFbon steel Exha1:1st gas (int) Loss of mateFial PeFiodie S1:1FVeillanee VII.H2 2 (A 3.3.1 18 e bo1:1ndary and PFeventi1.ie 27t Maintenanee SileneeF PFeSSl:IFe CaFbon steel Exha1:1st gas (int) Craekin§ fati§1:1e PeFiodie S1:1FVeillanee - - M bo1:1ndaFy and Pi=eventive Maintenanee I\.

T1:1FboehaFgm PFeSSl:IFe Gray east nlF indooF (ext) Loss of mateFial Extemal S1:1Ffaees VII.I 8 (A 3.3.1 58 A bo1:1ndary ifon. MonitoFing ~

-

'

TmboehaFgeF PFeSSl:IFe Gray east AiF indooF (int) Loss of matmial Extemal S1:1Ffaees

~.

H,.,6' 19 (E 3.2.1 32 e bo1:1ndaicy ifon. MonitoFin§ ~

NL-17-157 Page 14 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.3.2-13-IP3: Fuel Oil Systems Aging Effect Aging NUREG-Component Intended Table 1 Material Environment Requiring Management 1801 Vol. Notes Type Function Item Management Programs 2 Item A"

Turbocharger Pressure Aluminum nlr indoor (int) Nooe Nooe V.F 2 (EP 3.2.1 50 G boundary ~

Turbocharger Pressure Aluminum Exhaust gas (int) Loss of material Periodic Surveillance - - G boundary and Preventive Maintenance B.1.27 One-Time Inspection Program Description

-

  • Internal surfaces of the IP2 instrument air system stainless steel or aluminum tubing and valve bodies containing condensation B.1.29 Periodic Surveillance and Preventive Maintenance Program Description Condensate system Use visual or NOE techniques to inspect a representative sample of the internal surfaces of the main condenser tubes exposed to raw water (internal) and expansion joints exposed to treated water and indoor air to manage cracking, loss of material, aREi change in materials properties, and fouling.

NL-17-157 Page 15 of 16 Dockets 50-247 and 50-286 Attachment 1 Table 3.4.2-5-4-IP2 City Water System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review

-

rTable 3.4.2-5-4-IP2 City Water System (CYW)

, Aging Effect NUREG-Component Intended Aging Management Table 1 Material Environment Requiring 1801 Vol. 2 Notes Type Function Programs Item Management Item Copper ~ 3.2.1 53 G Pressure Strainer housing alloy >15% Air indoor (ext) Nooe Nooe (EP 10) eoundary iffi Copper Periodic - - G, 407 Pressure Treated water Surveillance and Strainer housing alloy >15% Loss of material eoundary iffi

~ Preventi11e Maintenance A.2.1.28 Periodic Surveilh:mce and Preventive Maintenance Program Surveillance testing and periodic inspections using visual or other non-destructive examination techniques verify that the following components are capable of performing their intended function.

o chlorination, circulating water, city water, intake structure system, emergency diesel generator, fresh water cooling, instrument air, integrated liquid waste handling, lube oil, miscellaneous, radiation monitoring, river water, station air, waste disposal, wash water, and water treatment plant system piping, piping components, and piping elements .---

NL-17-157 Page 16 of 16 Dockets 50-247 and 50-286 Attachment 1 A.2.1.39 Water Chemistry Control - Closed Cooling Water Program The Water Chemistry Control - Closed Cooling Water Program is an existing program that includes preventive measures that manage loss of material, cracking, or fouling for components in closed cooling water systems (component cooling water (CCW),

instrument air (IP2 only), fresh '1Jater cooling, conventional closed cooling (CCC), instrument air closed cooling (IACC), emergency.

diesel generator cooling, security generator cooling, station air (IP1) cooling and SBO/Appendix R diesel generator cooling). These chemistry activities provide for monitoring and controlling closed cooling water chemistry using procedures and processes based on EPRI guidance for closed cooling water chemistry.

Retrieved from "https://kanterella.com/w/index.php?title=NL-17-157,_Amendment_19_to_License_Renewal_Application_(LRA)&oldid=1961762"