ML18106B013: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 17: | Line 17: | ||
=Text= | =Text= | ||
{{#Wiki_filter:FORM NIS-1 REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | {{#Wiki_filter:FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
Component or Manufacturer Appurtenance or installer | : 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
#11 Steam Westinghouse Tampa Div. Generator P.O. Box 19218 Tampa, FL 33616 | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
# | : 4. Owner's Certificate of Authorization (if Required) N/A | ||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | : 9. Inspection Interval from February 27, 1988 to July 7, 2001 | ||
An inservice examination (ISi) of selected Class 1, Class 2 and Class 3 components of Public Service Electric and Gas Company's (PSE&G) Salem Generating Station, Unit 1, was performed by Public Service Electric & Gas (PSE&G), Magnaflux Quality Services (MQS), Southwest Research Institute (SwRI), Virginia Corporation of Richmond (VCR) and AEA Technology Engineering Services (AEA) personnel during the April 1995 -April 1998. These examinations-constituted the twelfth (2nd Period, 3rd Outage) at Salem 1 during the Second 10-year Inspection Interval of operation. | : 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | ||
Exams were performed in accordance with the 1983 Edition through Summer 1993 Addenda of ASME Section XI and the Salem lnservice Inspection Program Long Term Plan. ISi was performed utilizing visual (VT), magnetic particle (MT), liquid penetrant (PT), manual ultrasonic (UT), mechanized ultrasonic (M-UT) and radiography (RT) nondestructive examination techniques. | : 11. Abstract of Examinations: | ||
Manuf. State or National Component or Manufacturer or Province Board No. | |||
Appurtenance or installer Installer No. | |||
Serial No. | |||
#11 Steam Westinghouse Tampa Div. 2174 N/A N/A Generator P.O. Box 19218 Tampa, FL 33616 II | |||
#12 Steam 2173 N/A N/A Generator II | |||
#13 Steam 2171 N/A N/A Generator II | |||
#14 Steam 2172 N/A N/A Generator II Reactor Coolant N/A N/A N/A System Safety Injection United Engineers & N/A N/A N/A System Constructors (UE&C) | |||
Residual Heat UE&C N/A N/A N/A Removal System Boiler Feed System UE&C N/A N/A N/A Main Steam System UE&C N/A N/A N/A Chemical Volume UE&C N/A N/A N/A and Control System Auxiliary Feedwater UE&C N/A N/A N/A System Containment Spray UE&C N/A N/A N/A System Service Water UE&C N/A N/A N/A System Component Cooling UE&C N/A N/A N/A System Sampling System UE&C N/A N/A N/A | |||
-- .. --.- - --- | |||
9901130104 990106 .~,ge: 1 (Rev. 1) | |||
PDR ADOCK 05000272 G PDR | |||
FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
: 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | |||
: 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
An inservice examination (ISi) of selected Class 1, Class 2 and Class 3 components of Public Service Electric and Gas Company's (PSE&G) Salem Generating Station, Unit 1, was performed by Public Service Electric & Gas (PSE&G), Magnaflux Quality Services (MQS), Southwest Research Institute (SwRI), Virginia Corporation of Richmond (VCR) and AEA Technology Engineering Services (AEA) personnel during the April 1995 - April 1998. These examinations-constituted the twelfth (2nd Period, 3rd Outage) at Salem 1 during the Second 10-year Inspection Interval of operation. | |||
Exams were performed in accordance with the 1983 Edition through Summer 1993 Addenda of ASME Section XI and the Salem lnservice Inspection Program Long Term Plan. | |||
ISi was performed utilizing visual (VT), magnetic particle (MT), liquid penetrant (PT), manual ultrasonic (UT), mechanized ultrasonic (M-UT) and radiography (RT) nondestructive examination techniques. | |||
This report also contains augmented examinations required by the Salem Technical Specifications, Regulatory Guides, Circulars and Bulletins issued by the United States Nuclear Regulatory Commission. | This report also contains augmented examinations required by the Salem Technical Specifications, Regulatory Guides, Circulars and Bulletins issued by the United States Nuclear Regulatory Commission. | ||
Page: 2 (Rev. 1) | Page: 2 (Rev. 1) | ||
FORM NIS-1 OWNER'5'ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'5'ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.1 MQS, SwRI and VCR under the direction of the PSE&G ISi Group, conducted 13 manual ultrasonic, five liquid penetrant, two magnetic particle examinations. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.1 MQS, SwRI and VCR under the direction of the PSE&G ISi Group, conducted 13 manual ultrasonic, five liquid penetrant, two magnetic particle examinations. | |||
There were no unacceptable indications identified. | There were no unacceptable indications identified. | ||
Class 1 Vessels | Class 1 Vessels Steam Generator Piping Reactor Coolant Safety Injection Residual Heat Removal Class 2 Vessels Steam Generator Piping Boiler Feed Main Steam Chemical Volume Control Page: 3 (Rev. 1) | ||
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01fi7 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.2 ISi Section XI Visual examinations on valves and bolting PSE&G's ISi Group conducted eight Class 1 bolting exams and one Class 1 valve internal exam. ISi Section XI examinations were conducted on the*following systems: Safety Injection Residual Heat Removal The following was identified during the course of these examinations: | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
Valve | : 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
An additional sample was not required, since the valve is the only one identified in that valve group. There were no other unacceptable indications identified. | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
11.3 ISi Section XI Visual examination of components supports PSE&G conducted four Class 1, 2 & 3 component support visual VT-3 and VT-3/4 examinations. | : 4. Owner's Certificate of Authorization (if Required) N/A | ||
ISi Section XI examinations were conducted on the following systems: Main Steam Safety Injection Reactor Coolant Chemical and Volume Control There were no unacceptable indications identified. | : 5. Commercial Service Date 07/01fi7 6. National Board Number for Unit 20757 | ||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.2 ISi Section XI Visual examinations on valves and bolting PSE&G's ISi Group conducted eight Class 1 bolting exams and one Class 1 valve internal exam. | |||
ISi Section XI examinations were conducted on the*following systems: | |||
Safety Injection Residual Heat Removal The following was identified during the course of these examinations: | |||
Valve 1RH26 (WinlSI Sum# 193800) had a visual VT-3 internal examination, which revealed seating surface wear. The valve interior was resurfaced and an acceptable post rework VT-3 valve internal examination was performed. An additional sample was not required, since the valve is the only one identified in that valve group. | |||
There were no other unacceptable indications identified. | |||
11.3 ISi Section XI Visual examination of components supports PSE&G conducted four Class 1, 2 & 3 component support visual VT-3 and VT-3/4 examinations. | |||
ISi Section XI examinations were conducted on the following systems: | |||
Main Steam Safety Injection Reactor Coolant Chemical and Volume Control There were no unacceptable indications identified. | |||
Page: 4 (Rev. 1) | Page: 4 (Rev. 1) | ||
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS. REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS. REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.4 ISi Section XI System Leakage Examinations PSE&G's ISi Group conducted four System Pressure Tests during a System Functional or lnservice Test, on Nuclear Class 1, 2 and 3, in accordance with ASME Section XI. A system Leakage exam was performed in accordance with ASME Section XI on all Class 1 Systems. The system leakage test was performed with the Reactor Coolant System in Mode 3 (normal operating temperature and pressure) with the insulation installed. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
No pressure boundary leakage was detected. | : 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.4 ISi Section XI System Leakage Examinations PSE&G's ISi Group conducted four System Pressure Tests during a System Functional or lnservice Test, on Nuclear Class 1, 2 and 3, in accordance with ASME Section XI. | |||
A system Leakage exam was performed in accordance with ASME Section XI on all Class 1 Systems. The system leakage test was performed with the Reactor Coolant System in Mode 3 (normal operating temperature and pressure) with the insulation installed. No pressure boundary leakage was detected. | |||
Work requests were initiated to correct minor mechanical leakage that was not corrected during the system walkdowns. | Work requests were initiated to correct minor mechanical leakage that was not corrected during the system walkdowns. | ||
Class 2 and 3 System Pressure Tests were conducted on the following systems: -Auxiliary Feedwater | Class 2 and 3 System Pressure Tests were conducted on the following systems: | ||
-Sampling 11.5 RCP Flywheel Augmented Examinations per USNRC Regulatory Guide 1.14 SwRI under the direction of the ISi Group performed a Ten year exam (with the Flywheels removed from the motors) on all Salem Unit 1 & 2's RCP Flywheels at the Westinghouse Cheswick, PA facility as identified below by the Flywheel serial number: 2S-76P917 | - Auxiliary Feedwater - Sampling 11.5 RCP Flywheel Augmented Examinations per USNRC Regulatory Guide 1.14 SwRI under the direction of the ISi Group performed a Ten year exam (with the Flywheels removed from the motors) on all Salem Unit 1 & 2's RCP Flywheels at the Westinghouse Cheswick, PA facility as identified below by the Flywheel serial number: | ||
Page: 5 (Rev. 1) | 2S-76P917 3S-76P917 1S-75P790 3S-75P790 1S-88P318 1S-D003 4S-75P790 2S-75P790 1S-76P917 There were no unacceptable indications identified. | ||
Page: 5 (Rev. 1) | |||
11.6 NRC Bulletin 88-08 "Thermal Stresses in Piping Connected to the Reactor Coolant System" Augmented Examinations VCR under the direction of PSE&G's ISi Group performed augmented ultrasonic and dye penetrant examinations on a total of 20 components, broken down as follows: (15) 1.5 inch Safety Injection piping welds Two 2 inch Chemical and Volume Control piping welds Two 3 inch Chemical and Volume Control piping welds There are no unacceptable indications identified. | |||
11.7 Augmented Exams per Branch Technical Position MEB 3-1 30 welds were volumetrically examined, to comply with the augmented requirements of NUREG 0800 Standard Review Plan, Section 3.6.2, Branch Technical Position MEB 3-1. The UT was performed by VCR with no unacceptable indications identified. | FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS. REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.8 NRC Bulletin 88-11 "Pressurizer Surge Line Thermal Stratification" Augmented Examinations PSE&G's ISi Group performed visual examinations on all existing surge line pipe supports I HEBA restraints and their associated insulation interfaces. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) NIA | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.6 NRC Bulletin 88-08 "Thermal Stresses in Piping Connected to the Reactor Coolant System" Augmented Examinations VCR under the direction of PSE&G's ISi Group performed augmented ultrasonic and dye penetrant examinations on a total of 20 components, broken down as follows: | |||
(15) 1.5 inch Safety Injection piping welds Two 2 inch Chemical and Volume Control piping welds Two 3 inch Chemical and Volume Control piping welds There are no unacceptable indications identified. | |||
11.7 Augmented Exams per Branch Technical Position MEB 3-1 30 welds were volumetrically examined, to comply with the augmented requirements of NUREG 0800 Standard Review Plan, Section 3.6.2, Branch Technical Position MEB 3-1. | |||
The UT was performed by VCR with no unacceptable indications identified. | |||
11.8 NRC Bulletin 88-11 "Pressurizer Surge Line Thermal Stratification" Augmented Examinations PSE&G's ISi Group performed visual examinations on all existing surge line pipe supports I HEBA restraints and their associated insulation interfaces. | |||
A total of ten supports were examined. | A total of ten supports were examined. | ||
There were no unacceptable indications identified. | There were no unacceptable indications identified. | ||
Page: 6 (Rev. 1) | Page: 6 (Rev. 1) | ||
FORM Nl*S-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM Nl*S-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.9 Augmented System Leakage tests per NUREG 0578 "TMI Lessons Learned" PSE&G's ISi Group conducted 27 System Leakage Tests in accordance with NUREG 0578 on the following systems: Safety Injection, Residual Heat Removal, Chemical and Volume Control, Containment Spray, Sampling, Liquid Radwaste, Waste Gas, & Waste* Liquid There were no unacceptabie indications identified. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
11.10 PSE&G's Supplemental Ultrasonic Examinations on the old Steam Generator Feedwater Nozzle to Forging Expanders AEA ultrasonically examined the four Steam Generator Feedwater Nozzle inner radius and the barrel of the nozzle including the Feedwater thermal sleeves. There were no unacceptable indications identified. | : 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
11.11 PSE&G Augmented Visual Examinations on the Reactor Coolant Pump Main Flange connection (R/T# 290049) PSE&G's ISi Group performed a visual examination of the Reactor Coolant Pumps Main Flange connection for evidence of leakage in accordance with R/T# 290049. Each of the four RCP's showed evidence of RCS leakage (dried boron on the main flange connection area and the bolting). | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
All the RCP main flange studs were removed, several at a time, and visually VT-1 examined for damage and reinstalled and re-torqued. | : 4. Owner's Certificate of Authorization (if Required) N/A | ||
Several studs were found with unacceptable conditions and were replaced as required (See the following preservice examination descriptions for specific details) Page: 7 (Rev. 1) | : 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | ||
FORM Nl.S-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. | : 7. Components inspected (see page 1) | ||
* Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | : 8. Exam Dates February 2, 1994 to April 17, 1998 | ||
N/A 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations: | : 9. Inspection Interval from February 27, 1988 to July 7, 2001 | ||
11.12 Preservice Examinations on Various Bolting Material Replacements Several bolted connections were replaced as identified below: ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP NO. CJP NO. W.0.# DESCRIPTION | : 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | ||
: 1. N/A S-93-036 920804179 Valve | : 11. Abstract of Examinations: | ||
11.9 Augmented System Leakage tests per NUREG 0578 "TMI Lessons Learned" PSE&G's ISi Group conducted 27 System Leakage Tests in accordance with NUREG 0578 on the following systems: | |||
Safety Injection, Residual Heat Removal, Chemical and Volume Control, Containment Spray, Sampling, Liquid Radwaste, Waste Gas, & Waste* | |||
Liquid There were no unacceptabie indications identified. | |||
11.10 PSE&G's Supplemental Ultrasonic Examinations on the old Steam Generator Feedwater Nozzle to Forging Expanders AEA ultrasonically examined the four Steam Generator Feedwater Nozzle inner radius and the barrel of the nozzle including the Feedwater thermal sleeves. | |||
There were no unacceptable indications identified. | |||
11.11 PSE&G Augmented Visual Examinations on the Reactor Coolant Pump Main Flange connection (R/T# 290049) | |||
PSE&G's ISi Group performed a visual examination of the Reactor Coolant Pumps Main Flange connection for evidence of leakage in accordance with R/T# 290049. | |||
Each of the four RCP's showed evidence of RCS leakage (dried boron on the main flange connection area and the bolting). All the RCP main flange studs were removed, several at a time, and visually VT-1 examined for damage and reinstalled and re-torqued. Several studs were found with unacceptable conditions and were replaced as required (See the following preservice examination descriptions for specific details) | |||
Page: 7 (Rev. 1) | |||
FORM Nl.S-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
: 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | |||
: 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. | |||
* Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations: | |||
11.12 Preservice Examinations on Various Bolting Material Replacements Several bolted connections were replaced as identified below: | |||
ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP NO. CJP NO. W.0.# DESCRIPTION | |||
: 1. N/A S-93-036 920804179 Valve 1PR1 Bonnet Bolting | |||
: 2. N/A S-94-048 950527023 Valve 1PR4 Flange Bolting | |||
: 3. N/A S-94-052 940425148 Valve 1PR5 Flange Bolting | |||
: 4. N/A S-94-051 940425145 Valve 1PR3 Flange Bolting | |||
: 5. N/A S-94-073 940520130 Valve 1PR3 Flange Bolting | |||
: 6. N/A S-95-288 950325019 Valve 13MS167 | |||
: 7. N/A S-95-287 950325019 Valve 1CV78 | |||
: 8. N/A S-95-254 950527006 Valve 1CV80 | |||
: 9. N/A S-95-180 950505099 Valve 1CV75 | |||
: 10. N/A S-95-176 950520006 Valve 1SJ150 | |||
: 11. N/A S-95-026 941112125 Valve 1CV75 | |||
: 12. N/A S-96-072 950811370 13 RCP Main Flange | |||
: 13. N/A S-96-071 950811362 11 RCP Main Flange | |||
: 14. N/A S-96-062 950811372 14 RCP Main Flange | |||
: 15. N/A S-96-059 950811368 12 RCP Main Flange | |||
: 16. N/A S-97-031 960921041 Valve 14MS167 | |||
: 17. N/A S-97-077 960921040 Valve 12MS167 | |||
: 18. N/A S-97-232 950527035 Valve 1PR3 Inlet Flange | |||
: 19. N/A S-97-233 951104046 Valve 1PR4 Inlet Flange | |||
: 20. N/A S-97-234 950608024 Valve 1PR5 Inlet Flange | |||
: 21. N/A S-97-263 971107115 Valve 2PS25 | |||
: 22. N/A N/A N/A Valve 1PR3, 4 & 5 (P.O. - P3-0933105-0630) | |||
The applicable (PSI) examinations were performed with no unacceptable indications identified. | |||
Page: 8 (Rev. 1) | Page: 8 (Rev. 1) | ||
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. *Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.13 Preservice Examinations on Variuos Component Supports and their Associated Integral Attachments, due to Repair I Replacements Several component supports and their associated integral attachments were replaced I replaced or modified as identified below: Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
: 1. 1EC-3323-2 PS-94-036 940811077 MSWG-30 2. 1EC-3323-3 PS-95-033 950913228 S1-SWPG-49 | : 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
: 3. 1EC-3396-4 PS-95-070 951114131 Various Aux. Feedwater supports 4. 1EC-3412-1 PS-95-037** | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
950823379 Various PZR Relief supports 5. N/A S-95-210 950809300 MSWG-36A 6. N/A S-95-171 950803107 MSWG-25 7. 1EC-3396-1 PS-95-028 950606218 Various SJ, RHR, & CS supports 8. N/A S-95-105 950519222 13-FWLS-11 | : 4. Owner's Certificate of Authorization (if Required) N/A | ||
: 9. N/A S-95-040 950215277 | : 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | ||
: 10. 1EE-0102 PS-95-012 950206127 1C-PRH-155 | : 7. Components inspected (see page 1) | ||
: 11. | : 8. *Exam Dates February 2, 1994 to April 17, 1998 | ||
: 14. 1EC-3322-4 PS-95-035 940811075 Various Service Water supports 15. 1EC-3322-2 PS-94-034 940811076 Various Service Water supports 16. 1EC-3323-3 PS-95-032 950913288 Various Service Water supports 17. 1EC-3323-3 PS-95-050 950914129 Various Service Water supports 18. | : 9. Inspection Interval from February 27, 1988 to July 7, 2001 | ||
& 1C-11SIA-39 | : 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | ||
: 19. 1EE-0282-1 PS-96-142 960523251 Various Service Water supports 20. | : 11. Abstract of Examinations: | ||
FORM OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | 11.13 Preservice Examinations on Variuos Component Supports and their Associated Integral Attachments, due to Repair I Replacements Several component supports and their associated integral attachments were replaced I replaced or modified as identified below: | ||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | ||
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | : 1. 1EC-3323-2 PS-94-036 940811077 MSWG-30 | ||
: 22. 1EC-3668-9 PS-97-071 970318121 Various Service Water supports 23. 1EC-3668-3 PS-97-085 970318099 Various SW (CFCU) supports 24. 1E0-2600-1 PS-97-039 961011186 1CCH-8 25. 1EC-3668-4 PS-97-090 970318103 Various SW (CFCU) supports 26. | : 2. 1EC-3323-3 PS-95-033 950913228 S1-SWPG-49 | ||
& 38 27. 1EC-3715-3 PS-97-125 970815174 Various CVCS supports 28. 1EC-3668-5 PS-97-091 970318104 Various SW (CFCU) supports 29. 1EC-3668-3 PS-97-084 970318099 Various SW (CFCU) supports 30. 1EC-3715-2 PS-97-116 970818173 Various CS supports 31. 1EC-3668-7 PS-97-129 970318108 Various SW (CFCU) supports 32. | : 3. 1EC-3396-4 PS-95-070 951114131 Various Aux. Feedwater supports | ||
: 33. | : 4. 1EC-3412-1 PS-95-037** 950823379 Various PZR Relief supports | ||
& FWG-12-3066 970525067 | : 5. N/A S-95-210 950809300 MSWG-36A | ||
: 34. 1EA-1240-1 PS-98-003 970526071 Various S/G Feedwater supports 970526068 | : 6. N/A S-95-171 950803107 MSWG-25 | ||
: 35. 1 EC-3343-1 PS-97-049 950218096 S/G platform to S/G lower vertical support PS-97-050 950609102 attachment welds PS-97-051 PS-97-052 | : 7. 1EC-3396-1 PS-95-028 950606218 Various SJ, RHR, & CS supports | ||
: 36. N/A S-94-074 940426177 1A-CVCH-408A and | : 8. N/A S-95-105 950519222 13-FWLS-11 | ||
: 38. N/A S-97-224 970811072 1PRSN29 39. N/A S-95-161 950523016 | : 9. N/A S-95-040 950215277 1M-SWPS-029 | ||
FORM NJS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | : 10. 1EE-0102 PS-95-012 950206127 1C-PRH-155 | ||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | : 11. 1EC-3322-1 PS-95-033 940811073 Various Service Water supports | ||
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | : 12. 1EC-3323-1 PS-94-035 950914127 Various Service Water supports | ||
: 40. N/A S-95-220 950523016 | : 13. 1EC-3404-1 PS-95-010 950206095 1-PRG-2552 | ||
: 41. N/A S-95-157 950523016 1A-CC-SN100B | : 14. 1EC-3322-4 PS-95-035 940811075 Various Service Water supports | ||
: 42. N/A S-95-159 950523016 | : 15. 1EC-3322-2 PS-94-034 940811076 Various Service Water supports | ||
: 43. N/A S-95-248 950523016 | : 16. 1EC-3323-3 PS-95-032 950913288 Various Service Water supports | ||
: 44. N/A S-95-221 950523016 | : 17. 1EC-3323-3 PS-95-050 950914129 Various Service Water supports | ||
: 45. N/A S-95-158 950523016 1A-SISN-101A | : 18. 1EC-3476-1 PS-95-078 951001130 1C-13SIH-136 & 1C-11SIA-39 | ||
: 46. N/A S-97-239 950815548 | : 19. 1EE-0282-1 PS-96-142 960523251 Various Service Water supports | ||
: 47. N/A S-95-160 950523016 1A-MSASN-147A | : 20. 1EC-3525-1 PS-96-001 951212220 Various CVCS supports | ||
: 48. N/A S-95-195 950523016 1A-MSANS-147A The applicable (PSI) exams were performed with no unacceptable indications identified. | : 21. 1EC-3668-8 PS-97-070 970318111 1P-11 SWG-005 & 1P-11 SWS-2 Page: 9 (Rev. 1) | ||
11.14 Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications Several piping welds were repaired I replaced or modified as identified below: Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO. 1. NIA S-95-292 931002072 11SJ139 associated piping welds 2. N/A S-95-349 950623083 11 RHR Pump piping replacement | |||
: 3. 1EE-0152-1 PS-95-093 951120163 Valve | FORM N~S-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
FORM NIS-1 REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | : 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO. 5. N/A S-96-084 960111096 Valve 13SJ143 replacement welds 6. N/A S-96-398 960506124 Valve 11 RH 10 replacement welds 7. 1EC-3525-1 PS-96-001 951212220 Valves 1CV63 & 1CV141 relocation | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
11.15 Preservice Examinations per, DCP# MM-97-099, CJP# S-97-156, Work Order# 970613277 Replacement of the 11 Charging Pump Casing (1 CVE20). The applicable (PSI) examinations were performed with no unacceptable indications identified. | : 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | ||
11.16 Preservice Examinations per, CJP# S-97-257, Work Order# 971108157 Weld repairs to the 100' personnel airlock door seal knife edges. The (PSI) examinations were performed with no unacceptable indications identified. | : 7. Components inspected (see page 1) | ||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | |||
: 22. 1EC-3668-9 PS-97-071 970318121 Various Service Water supports | |||
: 23. 1EC-3668-3 PS-97-085 970318099 Various SW (CFCU) supports | |||
: 24. 1E0-2600-1 PS-97-039 961011186 1CCH-8 | |||
: 25. 1EC-3668-4 PS-97-090 970318103 Various SW (CFCU) supports | |||
: 26. 1EC-2668-15 PS-97-092 970318133 1C-13SWG-3A & 38 | |||
: 27. 1EC-3715-3 PS-97-125 970815174 Various CVCS supports | |||
: 28. 1EC-3668-5 PS-97-091 970318104 Various SW (CFCU) supports | |||
: 29. 1EC-3668-3 PS-97-084 970318099 Various SW (CFCU) supports | |||
: 30. 1EC-3715-2 PS-97-116 970818173 Various CS supports | |||
: 31. 1EC-3668-7 PS-97-129 970318108 Various SW (CFCU) supports | |||
: 32. 1EA-1240-1 PS-98-001 970620208 FWH-14-24 | |||
: 33. 1EA-1240-1 PS-98-002 970525116 FWG-11-3065 & FWG-12-3066 970525067 | |||
: 34. 1EA-1240-1 PS-98-003 970526071 Various S/G Feedwater supports 970526068 | |||
: 35. 1 EC-3343-1 PS-97-049 950218096 S/G platform to S/G lower vertical support PS-97-050 950609102 attachment welds PS-97-051 PS-97-052 | |||
: 36. N/A S-94-074 940426177 1A-CVCH-408A and 1A-CVCH-407 A | |||
: 37. N/A S-94-049 940413245 1C-PRH-145 and 1C-PRH-149 940424126 | |||
: 38. N/A S-97-224 970811072 1PRSN29 | |||
: 39. N/A S-95-161 950523016 1C-PRSN-401 Page: 10 (Rev. 1) | |||
FORM NJS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
: 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | |||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION | |||
: 40. N/A S-95-220 950523016 1C-CC-SN001 | |||
: 41. N/A S-95-157 950523016 1A-CC-SN100B | |||
: 42. N/A S-95-159 950523016 1C-CVCSSN900 | |||
: 43. N/A S-95-248 950523016 1C-SISN-501 | |||
: 44. N/A S-95-221 950523016 1C-PRSN-023 | |||
: 45. N/A S-95-158 950523016 1A-SISN-101A | |||
: 46. N/A S-97-239 950815548 1C-SISN-500 | |||
: 47. N/A S-95-160 950523016 1A-MSASN-147A | |||
: 48. N/A S-95-195 950523016 1A-MSANS-147A The applicable (PSI) exams were performed with no unacceptable indications identified. | |||
11.14 Preservice Examinations on Various Piping welds due to Repair/ | |||
Replacement I Modifications Several piping welds were repaired I replaced or modified as identified below: | |||
Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO. | |||
: 1. NIA S-95-292 931002072 11SJ139 associated piping welds | |||
: 2. N/A S-95-349 950623083 11 RHR Pump piping replacement | |||
: 3. 1EE-0152-1 PS-95-093 951120163 Valve 1CV55 replacement welds | |||
: 4. 1EC-3530 PS-96-029 960116178 Safety Injection System orifice addition, socket welds Page: 11 (Rev. 1) | |||
FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
: 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | |||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO. | |||
: 5. N/A S-96-084 960111096 Valve 13SJ143 replacement welds | |||
: 6. N/A S-96-398 960506124 Valve 11 RH 10 replacement welds | |||
: 7. 1EC-3525-1 PS-96-001 951212220 Valves 1CV63 & 1CV141 relocation & | |||
associated welds | |||
: 8. N/A S-96-049 951004102 Valve 1CV137 & associated welds | |||
: 9. 1EC-3530-2 PS-97-029 970623168 Safety Injection System orifice addition, socket welds near valves 11-14SJ 16 The applicable (PSI) examinations were performed with no unacceptable indications identified. | |||
11.15 Preservice Examinations per, DCP# MM-97-099, CJP# S-97-156, Work Order# 970613277 Replacement of the 11 Charging Pump Casing (1 CVE20). | |||
The applicable (PSI) examinations were performed with no unacceptable indications identified. | |||
11.16 Preservice Examinations per, CJP# S-97-257, Work Order# 971108157 Weld repairs to the 100' personnel airlock door seal knife edges. | |||
The (PSI) examinations were performed with no unacceptable indications identified. | |||
Page: 12 (Rev. 1) | Page: 12 (Rev. 1) | ||
FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE .PECT.IONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations: | FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE .PECT.IONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
: 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | |||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations: | |||
11 .17 Preservice Examinations per, Work Order# 971129120 The 100' personnel airlock inside and outside door (inner and outer) rubber 0-ring seal replacement. | 11 .17 Preservice Examinations per, Work Order# 971129120 The 100' personnel airlock inside and outside door (inner and outer) rubber 0-ring seal replacement. | ||
The (PSI) examinations were performed with no unacceptable indications identified. | The (PSI) examinations were performed with no unacceptable indications identified. | ||
11.18 Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments The Steam Generator Vessel welds, Steam Generator Primary Manway bolting, Reactor Coolant, Feedwater, and Main Steam piping welds and their associated component supports I integral attachments were replaced I repaired and I or modified as identified below: Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM PSE&G DCP PSE&G REPAIR I REPLACEMENT I MODIFICATION NO. NO. P.O.# DESCRIPTION | 11.18 Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments The Steam Generator Vessel welds, Steam Generator Primary Manway bolting, Reactor Coolant, Feedwater, and Main Steam piping welds and their associated component supports I integral attachments were replaced I repaired and I or modified as identified below: | ||
: 1. N/A P3-0879959 | Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM PSE&G DCP PSE&G REPAIR I REPLACEMENT I MODIFICATION NO. NO. P.O.# DESCRIPTION | ||
#11 -14 Steam Generator (S/G) vessel welds were preservice (PSI) examined at the Sea Brook Facility by SwRI after the construction hydro was satisfactorily completed. | : 1. N/A P3-0879959 #11 - 14 Steam Generator (S/G) vessel welds were preservice (PSI) examined at the Sea Brook Facility by SwRI after the construction hydro was satisfactorily completed. | ||
: 2. EWP#SLM-N/A #11 -14 new Steam Generators Primary Manway bolts MOD-04 were replaced with studs and nuts. 3.' EWP#SLM-N/A #11 -14 new Steam Generator Reactor Coolant hot and MOD-07 cold leg tie in welds. 4. | : 2. EWP#SLM- N/A #11 - 14 new Steam Generators Primary Manway bolts MOD-04 were replaced with studs and nuts. | ||
3.' EWP#SLM- N/A #11 - 14 new Steam Generator Reactor Coolant hot and MOD-07 cold leg tie in welds. | |||
: 4. 1EA-1240-11 N/A #11 SIG Feedwater piping and component support I integral attachment modifications. | |||
Page: 13 (Rev. 1) | Page: 13 (Rev. 1) | ||
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
: 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | |||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
EWP#SLM-01 NIA #11 -14 new Steam Generator Lower Vertical support modifications SwRI found a rejectable PSI indication on the #14 Steam Generator (S/N 2172) Transition Cone to Shell C weld. The rejectable indication was located at the inside surface, approximately 301 inches clock wise from ISi vessel zero. The rejectable indication was reduced in size by mechanical blending to within acceptable limits. There were no other unacceptable indications identified. | : 9. Inspection Interval from February 27, 1988 to July 7, 2001 | ||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM PSE&G DCP PSE&G REPAIR I REPLACEMENT I MODIFICATION NO. NO. P.O.# DESCRIPTION | |||
: 5. 1EA-1240-12 NIA #12 SIG Feedwater piping and component support I integral attachment modifications. | |||
: 6. 1EA-1240-13 NIA #13 SIG Feedwater piping and component support I integral attachment modifications. | |||
: 7. 1EA-1240-14 NIA #14 SIG Feedwater piping and component support I integral attachment modifications. | |||
: 8. 1EA-1241-11 NIA #11 SIG Main Steam piping and component support I integral attachment modifications. | |||
: 9. 1EA-1241-12 NIA #12 SIG Main Steam piping and component support I integral attachment modifications. | |||
: 10. 1EA-1241-13 NIA #13 SIG Main Steam piping and component support I integral attachment modifications. | |||
: 11. 1EA-1241-14 NIA #14 SIG Main Steam piping and component support I integral attachment modifications. | |||
: 12. EWP#SLM-01 NIA #11 - 14 new Steam Generator Lower Vertical support modifications SwRI found a rejectable PSI indication on the #14 Steam Generator (S/N 2172) Transition Cone to Shell C weld. The rejectable indication was located at the inside surface, approximately 301 inches clock wise from ISi vessel zero. The rejectable indication was reduced in size by mechanical blending to within acceptable limits. | |||
There were no other unacceptable indications identified. | |||
Page: 14 (Rev. 1) | Page: 14 (Rev. 1) | ||
FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE IPECTIONS | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | . | ||
FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE IPECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
SYSTEM COM COMPONENT PONE DESCRIPTION NTID Heater Drain A3 18" Orifice Heater Drain A29 18" X 16" X 12" Tee MSR (Reheat Drains) C17 3"Tee MSR (Reheat Drains) C18 3"Tee MSR (Reheat Drains) C20 3"Tee MSR (Reheat Drains) C30 3"Tee Misc. Drains H9 3" Orifice Condensate M1 20" Orifice Condensate M12 24" Elbow As a result of these repairs I replacements, and procedural requirements for readings less than 70% of nominal wall, an examination expansion of 35 components was performed. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
This increased the total number of examinations to 165 components. | : 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
The following is a break down of these examinations. | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.19 Erosion I Corrosion UT Thickness Program In response to NRC Bulletin 87-01 and Engineering Directive MEC-94-1071, 130 components were scheduled for UT thickness examinations The following Components were replaced, due to the results of the erosion I corrosion UT examinations performed. | |||
ITEM SYSTEM COM COMPONENT NO. PONE DESCRIPTION NTID | |||
: 1. Heater Drain A3 18" Orifice | |||
: 2. Heater Drain A29 18" X 16" X 12" Tee | |||
: 3. MSR (Reheat Drains) C17 3"Tee | |||
: 4. MSR (Reheat Drains) C18 3"Tee | |||
: 5. MSR (Reheat Drains) C20 3"Tee | |||
: 6. MSR (Reheat Drains) C30 3"Tee | |||
: 7. Misc. Drains H9 3" Orifice | |||
: 8. Condensate M1 20" Orifice | |||
: 9. Condensate M12 24" Elbow As a result of these repairs I replacements, and procedural requirements for readings less than 70% of nominal wall, an examination expansion of 35 components was performed. This increased the total number of examinations to 165 components. The following is a break down of these examinations. | |||
: a. Nine components were replaced. | : a. Nine components were replaced. | ||
: b. 156 were acceptable for continued service, based on minimum wall design requirements | : b. 156 were acceptable for continued service, based on minimum wall design requirements | ||
Line 146: | Line 381: | ||
There were no other unacceptable indications identified. | There were no other unacceptable indications identified. | ||
Page: 15 (Rev. 1) | Page: 15 (Rev. 1) | ||
FORM NIS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
N/A 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 7. Components inspected (see page 1) 8. Exam Dates February 2, 1994 to April 17, 1998 9. Inspection Interval from February 27, 1988 to July 7, 2001 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11. Abstract of Examinations: | FORM NIS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | ||
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers HYDRAULIC SNUBBERS (FIRST TEST SAMPLE) Hydraulic snubbers were tested using the Technical Specification 47.9(c), 10% sample plan by Wyle Laboratories using the API in-place snubber test machine and the Wyle Laboratories model 150 snubber test machine as follows: -Two SIG 1,000 Kip Rexnords -One MSIV 200 Kip Paul Monroe -One Lisega small hydraulic snubber All hydraulic snubbers tested satisfactorily, except for the one Lisega small snubber. MECHANICAL SNUBBERS (FIRST TEST SAMPLE) Mechanical snubbers were tested using the Technical Specification 4.7.9(c), 10% sample plan using the Wyle Laboratories model 150 snubber test machine as follows: -Two Mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10) -Four mechanical small (PSA-1/4 and 1/2) All mechanical snubbers tested satisfactorily, except for the two mechanical medium (PSA-1, 3 and 10) snubbers. | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
HYDRAULIC AND MECHANICAL EXPANDED SNUBBER TEST SAMPLES Due to Hydraulic and Mechanical snubbers test failures the following expanded snubber test samples were tested using the Wyle Laboratories model 150 snubber test machine. Four snubbers (100% of the Lisega hydraulic snubbers) | : 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | ||
-Two expanded samples totaling 22 mechanical medium (PSA-1, 3 and 10) PSE&G Engineering performed a stress evaluation on all failed snubber locations and concluded that the piping and components to which the snubbers were attached were not impaired due to in-operability of the snubbers. | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
: 4. Owner's Certificate of Authorization (if Required) N/A | |||
: 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757 | |||
: 7. Components inspected (see page 1) | |||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
: 9. Inspection Interval from February 27, 1988 to July 7, 2001 | |||
: 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | |||
: 11. Abstract of Examinations: | |||
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers HYDRAULIC SNUBBERS (FIRST TEST SAMPLE) | |||
Hydraulic snubbers were tested using the Technical Specification 47.9(c), | |||
10% sample plan by Wyle Laboratories using the API in-place snubber test machine and the Wyle Laboratories model 150 snubber test machine as follows: - Two SIG 1,000 Kip Rexnords | |||
- One MSIV 200 Kip Paul Monroe | |||
- One Lisega small hydraulic snubber All hydraulic snubbers tested satisfactorily, except for the one Lisega small snubber. | |||
MECHANICAL SNUBBERS (FIRST TEST SAMPLE) | |||
Mechanical snubbers were tested using the Technical Specification 4.7.9(c), 10% sample plan using the Wyle Laboratories model 150 snubber test machine as follows: | |||
- Two Mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10) | |||
- Four mechanical small (PSA-1/4 and 1/2) | |||
All mechanical snubbers tested satisfactorily, except for the two mechanical medium (PSA-1, 3 and 10) snubbers. | |||
HYDRAULIC AND MECHANICAL EXPANDED SNUBBER TEST SAMPLES Due to Hydraulic and Mechanical snubbers test failures the following expanded snubber test samples were tested using the Wyle Laboratories model 150 snubber test machine. | |||
Four snubbers (100% of the Lisega hydraulic snubbers) | |||
- Two expanded samples totaling 22 mechanical medium (PSA-1, 3 and 10) | |||
PSE&G Engineering performed a stress evaluation on all failed snubber locations and concluded that the piping and components to which the snubbers were attached were not impaired due to in-operability of the snubbers. | |||
Page: 16 (Rev. 1) | Page: 16 (Rev. 1) | ||
FQRM NtS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 3. Plant Unit Unit 1 (Facility Operating License DPR-70) 4. Owner's Certificate of Authorization (if Required) | |||
FQRM NtS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES | |||
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers (cont'd) STEAM GENERATOR REPLACEMENT, MSIV REFURBISHMENT | : 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101 | ||
: 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038 | |||
Five none Code pre-NF snubbers were found in the Turbine area and tested and were replaced with new snubbers. | : 3. Plant Unit Unit 1 (Facility Operating License DPR-70) | ||
HYDRAULIC AND MECHANICAL SNUBBER EXTENDED OUTAGE SAMPLE Due to the extended outage greater than 18 months, the following hydraulic and mechanical snubbers were tested to comply with Technical Specification 4.7.9 (c) (10% sample): -One 1,000 Kip Paul Monroe -One 1,000 Kip Rexnord -One 200 Kip Paul Monroe snubbers -One mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10) 100% mechanical small (PSA-114 and 112) under a new random sample were previously tested satisfactorily. | : 4. Owner's Certificate of Authorization (if Required) NIA | ||
Thus, no additional testing was required. | : 5. Commercial Service Date 07101177 6. National Board Number for Unit 20757 | ||
Page: 17 (Rev. 1) | : 7. Components inspected (see page 1) | ||
: 8. Exam Dates February 2, 1994 to April 17, 1998 | |||
Corrective Measures Recommended and Taken (see pages 2-17) We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code, Section XI. Certificate of Authorization No. (if applicable) | : 9. Inspection Interval from February 27, 1988 to July 7, 2001 | ||
Date dL 19 '1'r.Jl Signed PSE&G, Owner By CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Jersey and employed by . Protection Mutual Insurance Company, OBA Factory Mutual Engineering Association, have inspected the components described in this Owner's Report during the period February 2, 1994 to April 17, 1998, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. | : 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda | ||
Page: 18 (Rev. 1) J}} | : 11. Abstract of Examinations: | ||
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers (cont'd) | |||
STEAM GENERATOR REPLACEMENT, MSIV REFURBISHMENT & | |||
MISC. | |||
Sixteen SIG snubbers were removed during the SIG replacement and were returned their position, two SIG snubbers were retested satisfactorily, eight MSIV snubbers were removed for MSIV rebuild and were restored and one retested satisfactorily. Five none Code pre-NF snubbers were found in the Turbine area and tested and were replaced with new snubbers. | |||
HYDRAULIC AND MECHANICAL SNUBBER EXTENDED OUTAGE SAMPLE Due to the extended outage greater than 18 months, the following hydraulic and mechanical snubbers were tested to comply with Technical Specification 4.7.9 (c) (10% sample): | |||
- One 1,000 Kip Paul Monroe | |||
- One 1,000 Kip Rexnord | |||
- One 200 Kip Paul Monroe snubbers | |||
- One mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10) 100% mechanical small (PSA-114 and 112) under a new random sample were previously tested satisfactorily. Thus, no additional testing was required. | |||
Page: 17 (Rev. 1) | |||
11. | |||
12. | |||
13. | |||
. | |||
* Abstract of Examinations (see pages 2 -17) | |||
Abstract of Conditions Notes (see pages 2-17) | |||
A~stract_of Corrective Measures Recommended and Taken (see pages 2-17) | |||
We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code, Section XI. | |||
Certificate of Authorization No. (if applicable) ~If\. | |||
Date dL 19 '1'r.Jl Signed PSE&G, Owner By ::...._/"L---::~~====:::s;;;;;;;;::------ | |||
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Jersey and employed by | |||
. Protection Mutual Insurance Company, OBA Factory Mutual Engineering Association, have inspected the components described in this Owner's Report during the period February 2, 1994 to April 17, 1998, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. | |||
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. | |||
Page: 18 (Rev. 1) | |||
J}} |
Revision as of 08:49, 21 October 2019
ML18106B013 | |
Person / Time | |
---|---|
Site: | Salem ![]() |
Issue date: | 12/11/1998 |
From: | Public Service Enterprise Group |
To: | |
Shared Package | |
ML18106B012 | List: |
References | |
NUDOCS 9901130104 | |
Download: ML18106B013 (18) | |
Text
FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
Manuf. State or National Component or Manufacturer or Province Board No.
Appurtenance or installer Installer No.
Serial No.
- 11 Steam Westinghouse Tampa Div. 2174 N/A N/A Generator P.O. Box 19218 Tampa, FL 33616 II
- 12 Steam 2173 N/A N/A Generator II
- 13 Steam 2171 N/A N/A Generator II
- 14 Steam 2172 N/A N/A Generator II Reactor Coolant N/A N/A N/A System Safety Injection United Engineers & N/A N/A N/A System Constructors (UE&C)
Residual Heat UE&C N/A N/A N/A Removal System Boiler Feed System UE&C N/A N/A N/A Main Steam System UE&C N/A N/A N/A Chemical Volume UE&C N/A N/A N/A and Control System Auxiliary Feedwater UE&C N/A N/A N/A System Containment Spray UE&C N/A N/A N/A System Service Water UE&C N/A N/A N/A System Component Cooling UE&C N/A N/A N/A System Sampling System UE&C N/A N/A N/A
-- .. --.- - ---
9901130104 990106 .~,ge: 1 (Rev. 1)
FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
An inservice examination (ISi) of selected Class 1, Class 2 and Class 3 components of Public Service Electric and Gas Company's (PSE&G) Salem Generating Station, Unit 1, was performed by Public Service Electric & Gas (PSE&G), Magnaflux Quality Services (MQS), Southwest Research Institute (SwRI), Virginia Corporation of Richmond (VCR) and AEA Technology Engineering Services (AEA) personnel during the April 1995 - April 1998. These examinations-constituted the twelfth (2nd Period, 3rd Outage) at Salem 1 during the Second 10-year Inspection Interval of operation.
Exams were performed in accordance with the 1983 Edition through Summer 1993 Addenda of ASME Section XI and the Salem lnservice Inspection Program Long Term Plan.
ISi was performed utilizing visual (VT), magnetic particle (MT), liquid penetrant (PT), manual ultrasonic (UT), mechanized ultrasonic (M-UT) and radiography (RT) nondestructive examination techniques.
This report also contains augmented examinations required by the Salem Technical Specifications, Regulatory Guides, Circulars and Bulletins issued by the United States Nuclear Regulatory Commission.
Page: 2 (Rev. 1)
FORM NIS-1 OWNER'5'ATA REPORT FOR INSERVICE 1&ECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.1 MQS, SwRI and VCR under the direction of the PSE&G ISi Group, conducted 13 manual ultrasonic, five liquid penetrant, two magnetic particle examinations.
There were no unacceptable indications identified.
Class 1 Vessels Steam Generator Piping Reactor Coolant Safety Injection Residual Heat Removal Class 2 Vessels Steam Generator Piping Boiler Feed Main Steam Chemical Volume Control Page: 3 (Rev. 1)
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS' REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01fi7 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.2 ISi Section XI Visual examinations on valves and bolting PSE&G's ISi Group conducted eight Class 1 bolting exams and one Class 1 valve internal exam.
ISi Section XI examinations were conducted on the*following systems:
Safety Injection Residual Heat Removal The following was identified during the course of these examinations:
Valve 1RH26 (WinlSI Sum# 193800) had a visual VT-3 internal examination, which revealed seating surface wear. The valve interior was resurfaced and an acceptable post rework VT-3 valve internal examination was performed. An additional sample was not required, since the valve is the only one identified in that valve group.
There were no other unacceptable indications identified.
11.3 ISi Section XI Visual examination of components supports PSE&G conducted four Class 1, 2 & 3 component support visual VT-3 and VT-3/4 examinations.
ISi Section XI examinations were conducted on the following systems:
Main Steam Safety Injection Reactor Coolant Chemical and Volume Control There were no unacceptable indications identified.
Page: 4 (Rev. 1)
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS. REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.4 ISi Section XI System Leakage Examinations PSE&G's ISi Group conducted four System Pressure Tests during a System Functional or lnservice Test, on Nuclear Class 1, 2 and 3, in accordance with ASME Section XI.
A system Leakage exam was performed in accordance with ASME Section XI on all Class 1 Systems. The system leakage test was performed with the Reactor Coolant System in Mode 3 (normal operating temperature and pressure) with the insulation installed. No pressure boundary leakage was detected.
Work requests were initiated to correct minor mechanical leakage that was not corrected during the system walkdowns.
Class 2 and 3 System Pressure Tests were conducted on the following systems:
- Auxiliary Feedwater - Sampling 11.5 RCP Flywheel Augmented Examinations per USNRC Regulatory Guide 1.14 SwRI under the direction of the ISi Group performed a Ten year exam (with the Flywheels removed from the motors) on all Salem Unit 1 & 2's RCP Flywheels at the Westinghouse Cheswick, PA facility as identified below by the Flywheel serial number:
2S-76P917 3S-76P917 1S-75P790 3S-75P790 1S-88P318 1S-D003 4S-75P790 2S-75P790 1S-76P917 There were no unacceptable indications identified.
Page: 5 (Rev. 1)
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS. REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) NIA
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.6 NRC Bulletin 88-08 "Thermal Stresses in Piping Connected to the Reactor Coolant System" Augmented Examinations VCR under the direction of PSE&G's ISi Group performed augmented ultrasonic and dye penetrant examinations on a total of 20 components, broken down as follows:
(15) 1.5 inch Safety Injection piping welds Two 2 inch Chemical and Volume Control piping welds Two 3 inch Chemical and Volume Control piping welds There are no unacceptable indications identified.
11.7 Augmented Exams per Branch Technical Position MEB 3-1 30 welds were volumetrically examined, to comply with the augmented requirements of NUREG 0800 Standard Review Plan, Section 3.6.2, Branch Technical Position MEB 3-1.
The UT was performed by VCR with no unacceptable indications identified.
11.8 NRC Bulletin 88-11 "Pressurizer Surge Line Thermal Stratification" Augmented Examinations PSE&G's ISi Group performed visual examinations on all existing surge line pipe supports I HEBA restraints and their associated insulation interfaces.
A total of ten supports were examined.
There were no unacceptable indications identified.
Page: 6 (Rev. 1)
FORM Nl*S-1 OWNER'.ATA REPORT FOR INSERVICE l.PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.9 Augmented System Leakage tests per NUREG 0578 "TMI Lessons Learned" PSE&G's ISi Group conducted 27 System Leakage Tests in accordance with NUREG 0578 on the following systems:
Safety Injection, Residual Heat Removal, Chemical and Volume Control, Containment Spray, Sampling, Liquid Radwaste, Waste Gas, & Waste*
Liquid There were no unacceptabie indications identified.
11.10 PSE&G's Supplemental Ultrasonic Examinations on the old Steam Generator Feedwater Nozzle to Forging Expanders AEA ultrasonically examined the four Steam Generator Feedwater Nozzle inner radius and the barrel of the nozzle including the Feedwater thermal sleeves.
There were no unacceptable indications identified.
11.11 PSE&G Augmented Visual Examinations on the Reactor Coolant Pump Main Flange connection (R/T# 290049)
PSE&G's ISi Group performed a visual examination of the Reactor Coolant Pumps Main Flange connection for evidence of leakage in accordance with R/T# 290049.
Each of the four RCP's showed evidence of RCS leakage (dried boron on the main flange connection area and the bolting). All the RCP main flange studs were removed, several at a time, and visually VT-1 examined for damage and reinstalled and re-torqued. Several studs were found with unacceptable conditions and were replaced as required (See the following preservice examination descriptions for specific details)
Page: 7 (Rev. 1)
FORM Nl.S-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3.
- Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations:
11.12 Preservice Examinations on Various Bolting Material Replacements Several bolted connections were replaced as identified below:
ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP NO. CJP NO. W.0.# DESCRIPTION
- 1. N/A S-93-036 920804179 Valve 1PR1 Bonnet Bolting
- 2. N/A S-94-048 950527023 Valve 1PR4 Flange Bolting
- 3. N/A S-94-052 940425148 Valve 1PR5 Flange Bolting
- 4. N/A S-94-051 940425145 Valve 1PR3 Flange Bolting
- 5. N/A S-94-073 940520130 Valve 1PR3 Flange Bolting
- 6. N/A S-95-288 950325019 Valve 13MS167
- 7. N/A S-95-287 950325019 Valve 1CV78
- 8. N/A S-95-254 950527006 Valve 1CV80
- 9. N/A S-95-180 950505099 Valve 1CV75
- 10. N/A S-95-176 950520006 Valve 1SJ150
- 11. N/A S-95-026 941112125 Valve 1CV75
- 16. N/A S-97-031 960921041 Valve 14MS167
- 17. N/A S-97-077 960921040 Valve 12MS167
- 18. N/A S-97-232 950527035 Valve 1PR3 Inlet Flange
- 19. N/A S-97-233 951104046 Valve 1PR4 Inlet Flange
- 20. N/A S-97-234 950608024 Valve 1PR5 Inlet Flange
- 21. N/A S-97-263 971107115 Valve 2PS25
- 22. N/A N/A N/A Valve 1PR3, 4 & 5 (P.O. - P3-0933105-0630)
The applicable (PSI) examinations were performed with no unacceptable indications identified.
Page: 8 (Rev. 1)
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. *Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.13 Preservice Examinations on Variuos Component Supports and their Associated Integral Attachments, due to Repair I Replacements Several component supports and their associated integral attachments were replaced I replaced or modified as identified below:
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION
- 1. 1EC-3323-2 PS-94-036 940811077 MSWG-30
- 2. 1EC-3323-3 PS-95-033 950913228 S1-SWPG-49
- 3. 1EC-3396-4 PS-95-070 951114131 Various Aux. Feedwater supports
- 4. 1EC-3412-1 PS-95-037** 950823379 Various PZR Relief supports
- 5. N/A S-95-210 950809300 MSWG-36A
- 6. N/A S-95-171 950803107 MSWG-25
- 7. 1EC-3396-1 PS-95-028 950606218 Various SJ, RHR, & CS supports
- 8. N/A S-95-105 950519222 13-FWLS-11
- 9. N/A S-95-040 950215277 1M-SWPS-029
- 10. 1EE-0102 PS-95-012 950206127 1C-PRH-155
- 11. 1EC-3322-1 PS-95-033 940811073 Various Service Water supports
- 12. 1EC-3323-1 PS-94-035 950914127 Various Service Water supports
- 13. 1EC-3404-1 PS-95-010 950206095 1-PRG-2552
- 14. 1EC-3322-4 PS-95-035 940811075 Various Service Water supports
- 15. 1EC-3322-2 PS-94-034 940811076 Various Service Water supports
- 16. 1EC-3323-3 PS-95-032 950913288 Various Service Water supports
- 17. 1EC-3323-3 PS-95-050 950914129 Various Service Water supports
- 18. 1EC-3476-1 PS-95-078 951001130 1C-13SIH-136 & 1C-11SIA-39
- 19. 1EE-0282-1 PS-96-142 960523251 Various Service Water supports
- 20. 1EC-3525-1 PS-96-001 951212220 Various CVCS supports
- 21. 1EC-3668-8 PS-97-070 970318111 1P-11 SWG-005 & 1P-11 SWS-2 Page: 9 (Rev. 1)
FORM N~S-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION
- 22. 1EC-3668-9 PS-97-071 970318121 Various Service Water supports
- 23. 1EC-3668-3 PS-97-085 970318099 Various SW (CFCU) supports
- 24. 1E0-2600-1 PS-97-039 961011186 1CCH-8
- 25. 1EC-3668-4 PS-97-090 970318103 Various SW (CFCU) supports
- 26. 1EC-2668-15 PS-97-092 970318133 1C-13SWG-3A & 38
- 27. 1EC-3715-3 PS-97-125 970815174 Various CVCS supports
- 28. 1EC-3668-5 PS-97-091 970318104 Various SW (CFCU) supports
- 29. 1EC-3668-3 PS-97-084 970318099 Various SW (CFCU) supports
- 30. 1EC-3715-2 PS-97-116 970818173 Various CS supports
- 31. 1EC-3668-7 PS-97-129 970318108 Various SW (CFCU) supports
- 32. 1EA-1240-1 PS-98-001 970620208 FWH-14-24
- 33. 1EA-1240-1 PS-98-002 970525116 FWG-11-3065 & FWG-12-3066 970525067
- 34. 1EA-1240-1 PS-98-003 970526071 Various S/G Feedwater supports 970526068
- 35. 1 EC-3343-1 PS-97-049 950218096 S/G platform to S/G lower vertical support PS-97-050 950609102 attachment welds PS-97-051 PS-97-052
- 36. N/A S-94-074 940426177 1A-CVCH-408A and 1A-CVCH-407 A
- 37. N/A S-94-049 940413245 1C-PRH-145 and 1C-PRH-149 940424126
- 38. N/A S-97-224 970811072 1PRSN29
- 39. N/A S-95-161 950523016 1C-PRSN-401 Page: 10 (Rev. 1)
FORM NJS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
Preservice Examinations on Various Component Supports and their Associated Integral Attachments due to Repair/ Replacement I Modifications ITEM PSE&G DCP PSE&G CJP PSE&G COMPONENT NO. NO. NO. W.0.# DESCRIPTION
- 40. N/A S-95-220 950523016 1C-CC-SN001
- 41. N/A S-95-157 950523016 1A-CC-SN100B
- 42. N/A S-95-159 950523016 1C-CVCSSN900
- 43. N/A S-95-248 950523016 1C-SISN-501
- 44. N/A S-95-221 950523016 1C-PRSN-023
- 45. N/A S-95-158 950523016 1A-SISN-101A
- 46. N/A S-97-239 950815548 1C-SISN-500
- 47. N/A S-95-160 950523016 1A-MSASN-147A
- 48. N/A S-95-195 950523016 1A-MSANS-147A The applicable (PSI) exams were performed with no unacceptable indications identified.
11.14 Preservice Examinations on Various Piping welds due to Repair/
Replacement I Modifications Several piping welds were repaired I replaced or modified as identified below:
Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO.
- 1. NIA S-95-292 931002072 11SJ139 associated piping welds
- 2. N/A S-95-349 950623083 11 RHR Pump piping replacement
- 3. 1EE-0152-1 PS-95-093 951120163 Valve 1CV55 replacement welds
- 4. 1EC-3530 PS-96-029 960116178 Safety Injection System orifice addition, socket welds Page: 11 (Rev. 1)
FORM NIS-1 OWNER'~ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
Preservice Examinations on Various Piping welds due to Repair/ Replacement I Modifications ITEM PSE&G PSE&G PSE&G COMPONENT NO. DCP CJP W.0.# DESCRIPTION NO. NO.
- 5. N/A S-96-084 960111096 Valve 13SJ143 replacement welds
- 6. N/A S-96-398 960506124 Valve 11 RH 10 replacement welds
- 7. 1EC-3525-1 PS-96-001 951212220 Valves 1CV63 & 1CV141 relocation &
associated welds
- 8. N/A S-96-049 951004102 Valve 1CV137 & associated welds
- 9. 1EC-3530-2 PS-97-029 970623168 Safety Injection System orifice addition, socket welds near valves 11-14SJ 16 The applicable (PSI) examinations were performed with no unacceptable indications identified.
11.15 Preservice Examinations per, DCP# MM-97-099, CJP# S-97-156, Work Order# 970613277 Replacement of the 11 Charging Pump Casing (1 CVE20).
The applicable (PSI) examinations were performed with no unacceptable indications identified.
11.16 Preservice Examinations per, CJP# S-97-257, Work Order# 971108157 Weld repairs to the 100' personnel airlock door seal knife edges.
The (PSI) examinations were performed with no unacceptable indications identified.
Page: 12 (Rev. 1)
FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE .PECT.IONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01177 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda 11 . Abstract of Examinations:
11 .17 Preservice Examinations per, Work Order# 971129120 The 100' personnel airlock inside and outside door (inner and outer) rubber 0-ring seal replacement.
The (PSI) examinations were performed with no unacceptable indications identified.
11.18 Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments The Steam Generator Vessel welds, Steam Generator Primary Manway bolting, Reactor Coolant, Feedwater, and Main Steam piping welds and their associated component supports I integral attachments were replaced I repaired and I or modified as identified below:
Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM PSE&G DCP PSE&G REPAIR I REPLACEMENT I MODIFICATION NO. NO. P.O.# DESCRIPTION
- 1. N/A P3-0879959 #11 - 14 Steam Generator (S/G) vessel welds were preservice (PSI) examined at the Sea Brook Facility by SwRI after the construction hydro was satisfactorily completed.
- 2. EWP#SLM- N/A #11 - 14 new Steam Generators Primary Manway bolts MOD-04 were replaced with studs and nuts.
3.' EWP#SLM- N/A #11 - 14 new Steam Generator Reactor Coolant hot and MOD-07 cold leg tie in welds.
- 4. 1EA-1240-11 N/A #11 SIG Feedwater piping and component support I integral attachment modifications.
Page: 13 (Rev. 1)
FORM NIS-1 OWNER'.ATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
Preservice Examinations on four Replacement Steam Generators and their Associated Feedwater, Main Steam and Reactor Coolant piping welds and component supports I integral attachments ITEM PSE&G DCP PSE&G REPAIR I REPLACEMENT I MODIFICATION NO. NO. P.O.# DESCRIPTION
- 5. 1EA-1240-12 NIA #12 SIG Feedwater piping and component support I integral attachment modifications.
- 6. 1EA-1240-13 NIA #13 SIG Feedwater piping and component support I integral attachment modifications.
- 7. 1EA-1240-14 NIA #14 SIG Feedwater piping and component support I integral attachment modifications.
- 8. 1EA-1241-11 NIA #11 SIG Main Steam piping and component support I integral attachment modifications.
- 9. 1EA-1241-12 NIA #12 SIG Main Steam piping and component support I integral attachment modifications.
- 10. 1EA-1241-13 NIA #13 SIG Main Steam piping and component support I integral attachment modifications.
- 11. 1EA-1241-14 NIA #14 SIG Main Steam piping and component support I integral attachment modifications.
- 12. EWP#SLM-01 NIA #11 - 14 new Steam Generator Lower Vertical support modifications SwRI found a rejectable PSI indication on the #14 Steam Generator (S/N 2172) Transition Cone to Shell C weld. The rejectable indication was located at the inside surface, approximately 301 inches clock wise from ISi vessel zero. The rejectable indication was reduced in size by mechanical blending to within acceptable limits.
There were no other unacceptable indications identified.
Page: 14 (Rev. 1)
.
FORM NIS-1 OWNER'AATA REPORT FOR INSERVICE IPECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.19 Erosion I Corrosion UT Thickness Program In response to NRC Bulletin 87-01 and Engineering Directive MEC-94-1071, 130 components were scheduled for UT thickness examinations The following Components were replaced, due to the results of the erosion I corrosion UT examinations performed.
ITEM SYSTEM COM COMPONENT NO. PONE DESCRIPTION NTID
- 1. Heater Drain A3 18" Orifice
- 2. Heater Drain A29 18" X 16" X 12" Tee
- 3. MSR (Reheat Drains) C17 3"Tee
- 4. MSR (Reheat Drains) C18 3"Tee
- 5. MSR (Reheat Drains) C20 3"Tee
- 6. MSR (Reheat Drains) C30 3"Tee
- 7. Misc. Drains H9 3" Orifice
- 8. Condensate M1 20" Orifice
- 9. Condensate M12 24" Elbow As a result of these repairs I replacements, and procedural requirements for readings less than 70% of nominal wall, an examination expansion of 35 components was performed. This increased the total number of examinations to 165 components. The following is a break down of these examinations.
- a. Nine components were replaced.
- b. 156 were acceptable for continued service, based on minimum wall design requirements
- c. No components required a weld build-up.
There were no other unacceptable indications identified.
Page: 15 (Rev. 1)
FORM NIS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plarit Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) N/A
- 5. Commercial Service Date 07/01/77 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers HYDRAULIC SNUBBERS (FIRST TEST SAMPLE)
Hydraulic snubbers were tested using the Technical Specification 47.9(c),
10% sample plan by Wyle Laboratories using the API in-place snubber test machine and the Wyle Laboratories model 150 snubber test machine as follows: - Two SIG 1,000 Kip Rexnords
- One MSIV 200 Kip Paul Monroe
- One Lisega small hydraulic snubber All hydraulic snubbers tested satisfactorily, except for the one Lisega small snubber.
MECHANICAL SNUBBERS (FIRST TEST SAMPLE)
Mechanical snubbers were tested using the Technical Specification 4.7.9(c), 10% sample plan using the Wyle Laboratories model 150 snubber test machine as follows:
- Two Mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10)
- Four mechanical small (PSA-1/4 and 1/2)
All mechanical snubbers tested satisfactorily, except for the two mechanical medium (PSA-1, 3 and 10) snubbers.
HYDRAULIC AND MECHANICAL EXPANDED SNUBBER TEST SAMPLES Due to Hydraulic and Mechanical snubbers test failures the following expanded snubber test samples were tested using the Wyle Laboratories model 150 snubber test machine.
Four snubbers (100% of the Lisega hydraulic snubbers)
- Two expanded samples totaling 22 mechanical medium (PSA-1, 3 and 10)
PSE&G Engineering performed a stress evaluation on all failed snubber locations and concluded that the piping and components to which the snubbers were attached were not impaired due to in-operability of the snubbers.
Page: 16 (Rev. 1)
FQRM NtS-1 OWNER'IATA REPORT FOR INSERVICE .PECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES
- 1. Owner Public Service Electric & Gas Co., 80 Park Plaza, Newark, NJ, 07101
- 2. Plant Salem Generating Station P.O. Box E, Hancock's Bridge, NJ 08038
- 3. Plant Unit Unit 1 (Facility Operating License DPR-70)
- 4. Owner's Certificate of Authorization (if Required) NIA
- 5. Commercial Service Date 07101177 6. National Board Number for Unit 20757
- 7. Components inspected (see page 1)
- 8. Exam Dates February 2, 1994 to April 17, 1998
- 9. Inspection Interval from February 27, 1988 to July 7, 2001
- 10. Applicable Edition of ASME Section XI, 1983, through 1983 Summer Addenda
- 11. Abstract of Examinations:
11.20 Technical Specification 4.7.9 (c) Functional Testing of Selected Hydraulic and Mechanical Snubbers (cont'd)
STEAM GENERATOR REPLACEMENT, MSIV REFURBISHMENT &
MISC.
Sixteen SIG snubbers were removed during the SIG replacement and were returned their position, two SIG snubbers were retested satisfactorily, eight MSIV snubbers were removed for MSIV rebuild and were restored and one retested satisfactorily. Five none Code pre-NF snubbers were found in the Turbine area and tested and were replaced with new snubbers.
HYDRAULIC AND MECHANICAL SNUBBER EXTENDED OUTAGE SAMPLE Due to the extended outage greater than 18 months, the following hydraulic and mechanical snubbers were tested to comply with Technical Specification 4.7.9 (c) (10% sample):
- One 1,000 Kip Paul Monroe
- One 1,000 Kip Rexnord
- One 200 Kip Paul Monroe snubbers
- One mechanical large (PSA-35) 11 mechanical medium (PSA-1, 3 and 10) 100% mechanical small (PSA-114 and 112) under a new random sample were previously tested satisfactorily. Thus, no additional testing was required.
Page: 17 (Rev. 1)
11.
12.
13.
.
- Abstract of Examinations (see pages 2 -17)
Abstract of Conditions Notes (see pages 2-17)
A~stract_of Corrective Measures Recommended and Taken (see pages 2-17)
We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code,Section XI.
Certificate of Authorization No. (if applicable) ~If\.
Date dL 19 '1'r.Jl Signed PSE&G, Owner By ::...._/"L---::~~====:::s;;;;;;;;::------
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Jersey and employed by
. Protection Mutual Insurance Company, OBA Factory Mutual Engineering Association, have inspected the components described in this Owner's Report during the period February 2, 1994 to April 17, 1998, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Page: 18 (Rev. 1)
J