|
|
| Line 17: |
Line 17: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:~OR 1NFORMATION ON Jg TABLE 3.3-5 (Continued) | | {{#Wiki_filter:~ OR 1NFORMATION ON Jg TABLE 3.3-5 (Continued) |
| I ENGINEERED SAFETY FEATURES RESPONSE TIt1ES INITIATING SIGNAL AND FUNCTION 2.Pressurizer Pressure-Low a.Safety Injection (HPSI)b." Safety Injection (LPSI)c.Containment Isolation'. | | I ENGINEERED SAFETY FEATURES RESPONSE TIt1ES INITIATING SIGNAL AND FUNCTION RESPONSE TIt1E IN SECONDS |
| CIAS actuated mini-purge valves 2.Other CIAS actuated valves 3.Containment Pressure-High.RESPONSE TIt1E IN SECONDS (3PA/3Q)h)k I<30//30**<1Q.:6*/1O.6~* | | : 2. Pressurizer Pressure - Low |
| (3]8/31%A'~b.C.Safety Injection (HPSI)Safety Injection (LPSI)Containment Isolation 1.CIAS actuated mini-purge valves 2.Other CIAS actuated valves (3Q'A/3Q*A (3Q*/3PA'*<10:6*/1P.6*" (318/3 1)h*d.Main Steam Isolation 1.MSIS actuated MSIV's 2.MSIS actuated MFIV's¹e.Containment Spray Pump 4.Containment Pressure-High-High a.Containment Spray 5.Steam Generator Pressure-Low a.Main Steam Isolation 1.MSIS actuated MSIV's 2.MSIS actuated MFIV's¹6.Refueling Mater Tank-Low a.Containment Sump Recirculation 7.Steam Generator Level-Low 5 6*/5 6A'A 1P 6*/1P 68*(33*/23AA'33'4/23'A* | | : a. Safety Injection (HPSI) ( 3PA/3Q)h)k I |
| <5.6'/5 6~1P 6A/1P 6m*45k/45AA a.Auxiliary Feedwater (Motor Drive)b.Auxiliary Feedwater (Turbine Drive)¹¹¹(46k/235th<o4/'IG PALO VERDE" UNIT 1 9307080270 930630.PDR ,ADOCK 05000528 P PDR 3/4 3-29 At'1EHD11ENT NP."5 V I
| | " |
| ~DR INFORMATiON ONI+TABLE 3.3-5 (Continued)
| | : b. Safety Injection (LPSI) < 30//30** |
| I ENGINEERED SAFETY FEATURES RESPONSE TIMES INITIATING SIGNAL AND FUNCTION 2.Pressurizer Pressure-Low a.Safety Injection (HPSI)b.Safety Injection (LPSI)c.Containment Isolation RESPONSE TIME IN SECONDS<30I/30"*E I<30%/30"" i 3.l.2.a.Safety Injection (HPSI)b.Safety Injection (LPSI)c.Containment Isolation 1.CIAS actuated mini-purge valves 2.Other CIAS actuated valves d.Main Steam Isolation CIAS actuated mini-purge valves Other CIAS actuated valves~'ontainment Pressure-High<10.'6~/10.6~" (31k/31AR (30'P/30*8 3P*/3P**1P 6w/10 6**31k/I 31k*e.1;HSIS actuated MSIV's 2.HSIS actuated MFIV's¹Containment Spray Pump (5 6*/5 6'A*1P 6w/10 6aa (33*/23%A'ontainment Press ur e-High-High a.Containment Spray 5.Steam Generator Pressure-Low a.Hain Steam Isolation 1.HSIS actuated HSIV's 2.MSIS actuated MFIV's¹6.Refueling Water Tank-Low a.Containment Sump Recirculation 7.Steam Generator Level-Low a.Auxiliary Feedwater (Motor Drive)b, Auxiliary'Feedwater (Turbine Drive)¹¹¹(33'k/23k'A 1P 6A/10 68*45*/45AA 46",/23"*PALO VERDE-UNIT 2 3/4 3-29 I AMENDMENT Np.
| | : c. Containment Isolation'. |
| | CIAS actuated mini-purge valves < 1Q.:6*/1O.6~* |
| | : 2. Other CIAS actuated valves ( 3] 8/31%A' |
| | : 3. Containment Pressure - High. |
| | ~ Safety Injection (HPSI) ( 3Q'A/3Q*A |
| | : b. Safety Injection (LPSI) ( 3Q*/3PA'* |
| | C. Containment Isolation |
| | : 1. CIAS actuated mini-purge valves < 10:6*/1P.6*" |
| | : 2. Other CIAS actuated valves ( 318/3 1)h* |
| | : d. Main Steam Isolation |
| | : 1. MSIS actuated MSIV's 5 6*/5 6A'A |
| | : 2. MSIS actuated MFIV's¹ 1P 6*/1P 68* |
| | : e. Containment Spray Pump ( 33*/23AA' |
| | : 4. Containment Pressure - High-High |
| | : a. Containment Spray 33'4/23'A* |
| | : 5. Steam Generator Pressure - Low |
| | : a. Main Steam Isolation |
| | : 1. MSIS actuated MSIV's < 5.6'/5 6~ |
| | : 2. MSIS actuated MFIV's¹ 1P 6A/1P 6m* |
| | : 6. Refueling Mater Tank - Low |
| | : a. Containment Sump Recirculation 45k/45AA |
| | : 7. Steam Generator Level - Low |
| | : a. Auxiliary Feedwater (Motor Drive) ( 46k/235th |
| | : b. Auxiliary Feedwater (Turbine Drive)¹¹¹ < o4 /'IG PALO VERDE " UNIT 1 3/4 3-29 At'1EHD11ENT NP. "5 9307080270 930630. V PDR ,ADOCK 05000528 P PDR |
|
| |
|
| e'GR INFORMATlON O~TABLE 3.3-5 (Continued)
| | I |
| ENGINEERED SAFETY FEATURES RESPONSE TIMES t INITIATING SIGNAL AND FUNCTION RESPONSE TIME IN SECONDS 2.Pressurizer Pressure-Low PALO VERDE-UNIT 3 3/4 3-29 a.Safety Injection (HPSI)b.Safety Injection (LPSI)c.Containment Isolation 1.CIAS actuated mini-purge valves, 2.Other CIAS actuated valves 3.Containment Pressure-High a.Safety Injection (HPSI)b.Safety Injection (LPSI)c.Containment Isolation 1.CIAS actuated mini-purge valves 2.Other CIAS actuated valves d.Hain Steam Isolation 1.HSIS actuated HSIV's 2..HSIS actuated HFIV's/I'. | | ~ DR INFORMATiON ONI+ |
| Containment Spray Pump 4.Containment Pressure-High-High a.Containment Spray 5.Steam Generator Pressure-Low a.Hain Steam Isolation 1.llSIS actuated HSIV's 2.HSIS act.uated HFIV'//6.Refueling Water Tank-Low a.Containment Sump Recirculation 7.Steam Generator Level-Low a.Auxiliary Feedwater (Motor Drive)b.Auxiliary Feedwat,er (Turbine Drive)////// | | TABLE 3.3-5 (Continued) |
| I 3 P P/3 Q**t 30)/3PAA 10'm/10 31 Jc/3]A*30)k/30).R 3P*/3 0'4'8 i<10'*/10.6"" 3 1k/3PA A<5 6~/5 6**<10.6~/10.6~ | | I ENGINEERED SAFETY FEATURES RESPONSE TIMES INITIATING SIGNAL AND FUNCTION RESPONSE TIME IN SECONDS |
| 33*/23**3 3'P./2 3 A''6/5 6AA<10.6/10.6"" 4 58/4 5'8 8 46"/23"" z q g/'lt (I AllENDHENT Np. | | : 2. Pressurizer Pressure - Low |
| ~'}} | | : a. Safety Injection (HPSI) < 30I/30"* |
| | E I |
| | : b. Safety Injection (LPSI) < 30%/30"" |
| | i |
| | : c. Containment Isolation |
| | : l. CIAS actuated mini-purge valves < 10.'6~/10.6~" |
| | : 2. Other CIAS actuated valves |
| | ~ |
| | ( 31k/31AR |
| | : 3. Pressure - High |
| | 'ontainment |
| | : a. Safety Injection (HPSI) ( 30'P/30*8 |
| | : b. Safety Injection (LPSI) 3P*/3P** |
| | : c. Containment Isolation |
| | : 1. CIAS actuated mini-purge valves 1P 6w/10 6** |
| | : 2. Other CIAS actuated valves 31k/I 31k* |
| | : d. Main Steam Isolation 1; HSIS actuated MSIV's ( 5 6*/5 6'A* |
| | : 2. HSIS actuated MFIV's¹ 1P 6w/10 6aa |
| | : e. Containment Spray Pump ( |
| | - High-High 33*/23%A'ontainment Press ur e |
| | : a. Containment Spray ( 33'k/23k'A |
| | : 5. Steam Generator Pressure - Low |
| | : a. Hain Steam Isolation |
| | : 1. HSIS actuated HSIV's |
| | : 2. MSIS actuated MFIV's¹ 1P 6A/10 68* |
| | : 6. Refueling Water Tank - Low |
| | : a. Containment Sump Recirculation 45*/45AA |
| | : 7. Steam Generator Level - Low |
| | : a. Auxiliary Feedwater (Motor Drive) 46",/23"* |
| | b, Auxiliary 'Feedwater (Turbine Drive)¹¹¹ I |
| | PALO VERDE - UNIT 2 3/4 3-29 AMENDMENT Np. |
| | |
| | e'GR INFORMATlON O~ |
| | TABLE 3.3-5 (Continued) |
| | ENGINEERED SAFETY FEATURES RESPONSE TIMES t |
| | INITIATING SIGNAL AND FUNCTION RESPONSE TIME IN SECONDS |
| | : 2. Pressurizer Pressure - Low I |
| | : a. Safety Injection (HPSI) 3 P P/3 Q** |
| | t |
| | : b. Safety Injection (LPSI) 30)/3PAA |
| | : c. Containment Isolation |
| | : 1. CIAS actuated mini-purge valves, 10'm/10 |
| | : 2. Other CIAS actuated valves 31 Jc/3] A* |
| | : 3. Containment Pressure - High |
| | : a. Safety Injection (HPSI) 30)k/30).R |
| | : b. Safety Injection (LPSI) 3P*/3 0'4'8 |
| | : c. Containment Isolation i |
| | : 1. CIAS actuated mini-purge valves < 10'*/10. 6"" |
| | : 2. Other CIAS actuated valves 3 1k/3PA A |
| | : d. Hain Steam Isolation |
| | : 1. HSIS actuated HSIV's < 5 6~/5 6** |
| | 2.. HSIS actuated HFIV's/I'. |
| | < 10.6~/10.6~ |
| | Containment Spray Pump 33*/23** |
| | : 4. Containment Pressure High-High |
| | : a. Containment Spray 33 |
| | 'P. |
| | /2 3 A'' |
| | : 5. Steam Generator Pressure - Low |
| | : a. Hain Steam Isolation |
| | : 1. llSIS actuated HSIV's 6 /5 6AA |
| | : 2. HSIS act.uated HFIV'// < 10. 6 /10. 6"" |
| | : 6. Refueling Water Tank - Low |
| | : a. Containment Sump Recirculation 4 58/4 5'8 8 |
| | : 7. Steam Generator Level - Low |
| | : a. Auxiliary Feedwater (Motor Drive) 46"/23"" |
| | : b. Auxiliary Feedwat,er (Turbine Drive)////// z q g /'lt |
| | ( |
| | I PALO VERDE - UNIT 3 3/4 3-29 AllENDHENT Np. |
| | |
| | ~ '}} |
|
|---|
Category:TECHNICAL SPECIFICATIONS
MONTHYEARML17300B3791999-10-0808 October 1999
Proposed Tech Specs,Waiving Requirement to Perform SR 3.8.4.8 for Unit 1 Channels A,B & C on One Time Basis
ML17300B3521999-09-29029 September 1999
Revised Bases Pages,Providing Addl Discussion of Options Available to Exit Required Action G of TS 3.8.1 & Revised Page for TS 3.3.7
ML17300B3321999-09-14014 September 1999
Marked-up Tech Specs Pages to TS 5.5.2 & 5.6.2,making Noted Administrative Changes
ML17313B0601999-08-31031 August 1999
Rev 1 to PVNGS TS Bases Implemented Between Aug 1998 & Jul 1999
ML17313A9571999-05-26026 May 1999
Proposed Tech Specs,Reducing Spurious Reactor Trip Hazards Associated with Setpoints While Maintaining Plant Protection
ML17313A4181998-06-0909 June 1998
Proposed Improved Tech Specs Sections 3.5.1 & 3.5.2,revising Safety Injection tanks-operating & Safety Injection Tanks Shutdown
ML17313A1141997-11-0707 November 1997
Improved TS Pages for Section 3.0, LCO & SR Applicability, Section 3.1, Reactivity Control & Section 3.2, Power Distribution Limits. Generic Change to NUREG-1432,Rev 1 Incorporated Into Section 3.0 & 3.1
ML17312B6411997-08-28028 August 1997
Proposed Tech Specs,Allowing one-time Extension of Required Surveillance Interval for Msi Sys Portion Only of ESFAS Logic
ML20217Q6801997-08-22022 August 1997
Proposed Tech Specs,Clarifying Wording in TS Bases 3/4.6.1.4, Internal Pressure
ML20141H7831997-07-18018 July 1997
Proposed Improved Tech Specs Section 3.8, Electrical Power Sys
ML20141H7461997-07-18018 July 1997
Proposed Tech Specs,Providing Addl Info Re Improved TS Section 3.4, Rcs
ML17312B0311996-11-0606 November 1996
Proposed Tech Specs 3/4.8.1.1 Re A.C. Sources - Operating
ML17300B2651996-06-17017 June 1996
Proposed Tech Specs,Changing Section 1.10 & 3.2.8 & Associated Bases for Obtaining Thyroid Dcfs Used in Definition of Dose Equivalent I-131
ML17312A6491996-04-0101 April 1996
Proposed Tech Specs,Revising TS 3/4.9.6 to Temporarily Allow Use of Hoist Instead of Refueling Machine for Movement of Fuel Assembly at Core Location A-07
ML17312A6401996-03-26026 March 1996
Proposed Tech Specs 3/4.9.6,increasing Refueling Machine Overload Cut Off Limit to 2,000 Lb,In 50 Lb Increments,For Removal of Stuck Fuel Assembly from Core Location A-06
ML17312A6321996-03-26026 March 1996
Proposed Tech Specs,Revising TS 3/4.9.6 to Relocate Refueling Machine Overload Cut Off Limit from TS 3/4.9.6 to Plant UFSAR Per Criteria in 10CFR50.36 & Rev 1 of NUREG-1432 STS for C-E Plants.
ML17312A6371996-03-23023 March 1996
Proposed Tech Specs,Revising TS SR 4.8.2.1.e, DC Sources, to Suspend Provision of TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Entry Into Mode 4 Following Sixth Refueling Outage
ML17312A5011996-01-17017 January 1996
Revised Page 5-1 Changing Section 5.2.2 to Include Description of Material Used for Control Element Assemblies
ML17311B3221995-12-20020 December 1995
Proposed Tech Specs,Reducing Setpoint for MSIS & Rt on Low SG Pressure
ML17311B0301995-07-0303 July 1995
Proposed Tech Specs Re Temp Method to Respond to Sustained Degraded Switchyard Voltage
ML17311A9771995-06-21021 June 1995
Proposed Tech Specs,Modifying Tables 3.3-4 & 3.3-5 of Section 3/4.3.2 of Esfa Sys Instrumentation
ML17311A8651995-05-0202 May 1995
Proposed TS 3.1.2.6,Figure 3.1-1, Min Borated Water Vols, Relocating Elevations That Correspond to Min Required Water Vols for Spent Fuel Pool Into Site Procedures
ML17311A8231995-04-18018 April 1995
Proposed Tech Specs Section 3/4.4.4 Re Sleeving Process for SG Tube Repair
ML17311A5631994-12-28028 December 1994
Proposed TS Sections 3.9.6 & 4.9.6.1 Re Refueling Machine
ML17311A5021994-12-0707 December 1994
Proposed Tech Specs,Changing Note 5 to Table 4.3-1 of TS 3/4.3.1 to Allow Verification of Shape Annealing Matrix Elements Used in Core Protection Calculators
ML17311A4341994-11-30030 November 1994
Proposed TS 3/4.4.2,changing Pressurizer Code Safety Valve Lift Setting from 2,500 Psia to 2,475 Psia in LCOs 3.4.2.1 & 3.4.2.2
ML17311A3851994-10-31031 October 1994
Proposed Tech Spec Sections 3.9.6 & 4.9.6.1, Refueling Machine.
ML17311A3341994-10-0909 October 1994
Proposed Tech Specs Suspending TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Mode 4 Following Fifth Refueling Outage
ML17311A2171994-08-18018 August 1994
Proposed Tech Specs Adding Analytical Method Suppl Entitled, Calculative Methods for CE Large Break LOCA Evaluation Model for Analysis of CE & W Designed Nsss.
ML17310B4511994-07-12012 July 1994
Proposed Tech Specs Amend to Add One Action Statement to Table 3.3-3,entry 8
ML17310B4151994-07-0101 July 1994
Proposed Tech Specs Re Reactor Coolant Cold Leg Temperature Vs Core Power Level of TS 3.2.6
ML17310B4331994-06-20020 June 1994
Proposed Tech Specs Sections 5.3.1 & 5.6.1, & New TS Section 3/4.9.13 & Bases 3/4.9.13
ML17310B4091994-06-17017 June 1994
Proposed Tech Specs Removing Five Tables of Component Lists Per GL-91-08
ML17310B1661994-03-28028 March 1994
Proposed Tech Specs Re Min Condensate Storage Tank Indicated Level
ML17310B0611994-02-18018 February 1994
Proposed Tech Specs Figure 3.2-1,Section 3/4.1.1.4 & Bases 3/4.1.1.4,establishing Min Temp for Criticality at 545 F for Facilities
ML17310B0001994-01-19019 January 1994
Proposed Tech Specs of AF Automatic Actuation Logic Surveillance Frequency Extension
ML17310A8361993-11-16016 November 1993
Proposed Tech Specs Table 4.2-4, Min Staffing Requirements for PVNGS Emergencies, in Support of Proposed Rev to Emergency Plan
ML17310A7351993-10-26026 October 1993
Proposed Tech Specs Changing Maximum Nominal Enrichment of Fuel Allowed to Be Used in Reactor Core
ML17310A6161993-09-0808 September 1993
Proposed Tech Specs Section 6.9.1.10 Re Sys 80 Inletflow Distribution to List of Methods Used to Determine Core Operating Limits
ML17310A5211993-08-0505 August 1993
Proposed Tech Specs Requesting to Change Word Pressurizer to RCS for Item #4 in Both Tables 3.3-10 & 4.3-7
ML17310A5151993-08-0505 August 1993
Proposed Tech Specs Changing Surveillance Frequency from Monthly to Quarterly for Channel Functional Tests for RPS & ESFAS Instrumentation
ML17310A4211993-06-30030 June 1993
Proposed Tech Specs Requesting Addl Operating Margin in Time Response of Turbine Driven AF Pump to SG Low Level Signal
ML17310A2981993-05-20020 May 1993
Proposed TS 4.7.9 Re SR to Ensure Operability of Snubbers
ML17306B2671993-01-25025 January 1993
Proposed Tech Specs,Reflecting Revised Train a Kw Value to Be Rejected & Load Designation & Incorporation of Provisions Discussed in 920508 Ltr Re DG Full Load Rejection Testing
ML17306B1451992-11-20020 November 1992
Proposed Tech Specs Revising TS 3.2.1 Lhr, & TS 3.2.4, DNBR Margin, Increasing Action from 1 H to 4 H for COLSS Allowed Out of Svc Time Before Requirements Based on More Restrictive Core Protection Calculator Limits Apply
ML17306A6491992-04-13013 April 1992
Proposed TS 3.4.8.3 Re RCS - Overpressure Protection Sys
ML17306A4731992-02-14014 February 1992
Proposed Tech Specs Re Implementation of Generic Ltr 89-01, Implementation of Programmatic Controls for Radiological Effluent TS in Administrative Controls Section of TS & Relocation of Procedural Details of RETS to Odcm....
ML17306A4031992-01-16016 January 1992
Proposed Tech Specs Amend to TS Section 3.6.3,table 3.6-1 Deleting Type C Testing Requirements for Eight Valves
ML17306A3701991-12-30030 December 1991
Proposed Tech Spec Table 6.2-1 Re Min Shift Crew Composition
ML17306A3781991-12-30030 December 1991
Proposed Tech Spec Section 3.6.1.7 Re Containment Purge Supply & Exhaust Valves
1999-09-29
[Table view]
Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML17300B3791999-10-0808 October 1999
Proposed Tech Specs,Waiving Requirement to Perform SR 3.8.4.8 for Unit 1 Channels A,B & C on One Time Basis
ML17300B3521999-09-29029 September 1999
Revised Bases Pages,Providing Addl Discussion of Options Available to Exit Required Action G of TS 3.8.1 & Revised Page for TS 3.3.7
ML17300B3321999-09-14014 September 1999
Marked-up Tech Specs Pages to TS 5.5.2 & 5.6.2,making Noted Administrative Changes
ML17313B0601999-08-31031 August 1999
Rev 1 to PVNGS TS Bases Implemented Between Aug 1998 & Jul 1999
ML17313B0081999-07-14014 July 1999
Rev 2 to Inservice Insp Program Summary Manual for PVNGS Unit 1.
ML17313A9571999-05-26026 May 1999
Proposed Tech Specs,Reducing Spurious Reactor Trip Hazards Associated with Setpoints While Maintaining Plant Protection
ML17313A7511998-12-16016 December 1998
Rev 2 to ISI Program Summary Manual, for PVNGS Unit 3
ML17313A4181998-06-0909 June 1998
Proposed Improved Tech Specs Sections 3.5.1 & 3.5.2,revising Safety Injection tanks-operating & Safety Injection Tanks Shutdown
ML17313A1141997-11-0707 November 1997
Improved TS Pages for Section 3.0, LCO & SR Applicability, Section 3.1, Reactivity Control & Section 3.2, Power Distribution Limits. Generic Change to NUREG-1432,Rev 1 Incorporated Into Section 3.0 & 3.1
ML17312B6411997-08-28028 August 1997
Proposed Tech Specs,Allowing one-time Extension of Required Surveillance Interval for Msi Sys Portion Only of ESFAS Logic
ML20217Q6801997-08-22022 August 1997
Proposed Tech Specs,Clarifying Wording in TS Bases 3/4.6.1.4, Internal Pressure
ML20141H7831997-07-18018 July 1997
Proposed Improved Tech Specs Section 3.8, Electrical Power Sys
ML20141H7461997-07-18018 July 1997
Proposed Tech Specs,Providing Addl Info Re Improved TS Section 3.4, Rcs
ML17312B0311996-11-0606 November 1996
Proposed Tech Specs 3/4.8.1.1 Re A.C. Sources - Operating
ML17300B2651996-06-17017 June 1996
Proposed Tech Specs,Changing Section 1.10 & 3.2.8 & Associated Bases for Obtaining Thyroid Dcfs Used in Definition of Dose Equivalent I-131
ML17312A9451996-05-14014 May 1996
Rev 3 to Significant Condition Investigation.
ML17312A6491996-04-0101 April 1996
Proposed Tech Specs,Revising TS 3/4.9.6 to Temporarily Allow Use of Hoist Instead of Refueling Machine for Movement of Fuel Assembly at Core Location A-07
ML17312A6401996-03-26026 March 1996
Proposed Tech Specs 3/4.9.6,increasing Refueling Machine Overload Cut Off Limit to 2,000 Lb,In 50 Lb Increments,For Removal of Stuck Fuel Assembly from Core Location A-06
ML17312A6321996-03-26026 March 1996
Proposed Tech Specs,Revising TS 3/4.9.6 to Relocate Refueling Machine Overload Cut Off Limit from TS 3/4.9.6 to Plant UFSAR Per Criteria in 10CFR50.36 & Rev 1 of NUREG-1432 STS for C-E Plants.
ML17312A6371996-03-23023 March 1996
Proposed Tech Specs,Revising TS SR 4.8.2.1.e, DC Sources, to Suspend Provision of TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Entry Into Mode 4 Following Sixth Refueling Outage
ML17312A5691996-03-0505 March 1996
Revised Pages to ISI Program Summary Manual
ML17312A5011996-01-17017 January 1996
Revised Page 5-1 Changing Section 5.2.2 to Include Description of Material Used for Control Element Assemblies
ML17311B3221995-12-20020 December 1995
Proposed Tech Specs,Reducing Setpoint for MSIS & Rt on Low SG Pressure
ML17311B3181995-12-20020 December 1995
Revised Pages to ISI Program Summary Manual
ML17311B0301995-07-0303 July 1995
Proposed Tech Specs Re Temp Method to Respond to Sustained Degraded Switchyard Voltage
ML17311A9771995-06-21021 June 1995
Proposed Tech Specs,Modifying Tables 3.3-4 & 3.3-5 of Section 3/4.3.2 of Esfa Sys Instrumentation
ML17311A8651995-05-0202 May 1995
Proposed TS 3.1.2.6,Figure 3.1-1, Min Borated Water Vols, Relocating Elevations That Correspond to Min Required Water Vols for Spent Fuel Pool Into Site Procedures
ML17311A8231995-04-18018 April 1995
Proposed Tech Specs Section 3/4.4.4 Re Sleeving Process for SG Tube Repair
ML17312A9381995-02-0303 February 1995
Corrective Action Program.
ML17311A5631994-12-28028 December 1994
Proposed TS Sections 3.9.6 & 4.9.6.1 Re Refueling Machine
ML17311A5021994-12-0707 December 1994
Proposed Tech Specs,Changing Note 5 to Table 4.3-1 of TS 3/4.3.1 to Allow Verification of Shape Annealing Matrix Elements Used in Core Protection Calculators
ML17311A4341994-11-30030 November 1994
Proposed TS 3/4.4.2,changing Pressurizer Code Safety Valve Lift Setting from 2,500 Psia to 2,475 Psia in LCOs 3.4.2.1 & 3.4.2.2
ML17311A3851994-10-31031 October 1994
Proposed Tech Spec Sections 3.9.6 & 4.9.6.1, Refueling Machine.
ML17311A3341994-10-0909 October 1994
Proposed Tech Specs Suspending TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Mode 4 Following Fifth Refueling Outage
ML17311A2171994-08-18018 August 1994
Proposed Tech Specs Adding Analytical Method Suppl Entitled, Calculative Methods for CE Large Break LOCA Evaluation Model for Analysis of CE & W Designed Nsss.
ML17310B4511994-07-12012 July 1994
Proposed Tech Specs Amend to Add One Action Statement to Table 3.3-3,entry 8
ML17310B4151994-07-0101 July 1994
Proposed Tech Specs Re Reactor Coolant Cold Leg Temperature Vs Core Power Level of TS 3.2.6
ML17310B4331994-06-20020 June 1994
Proposed Tech Specs Sections 5.3.1 & 5.6.1, & New TS Section 3/4.9.13 & Bases 3/4.9.13
ML17310B4091994-06-17017 June 1994
Proposed Tech Specs Removing Five Tables of Component Lists Per GL-91-08
ML17310B1661994-03-28028 March 1994
Proposed Tech Specs Re Min Condensate Storage Tank Indicated Level
ML17310B0911994-03-0202 March 1994
SG Tube Insp Plan.
ML17310B0771994-02-24024 February 1994
PVNGS Unit 1 Cycle 5 Startup Rept.
ML17310B0611994-02-18018 February 1994
Proposed Tech Specs Figure 3.2-1,Section 3/4.1.1.4 & Bases 3/4.1.1.4,establishing Min Temp for Criticality at 545 F for Facilities
ML17310B0251994-01-27027 January 1994
Unit 2 Steam Generator Tube Insp Plan Addendum.
ML17310B0001994-01-19019 January 1994
Proposed Tech Specs of AF Automatic Actuation Logic Surveillance Frequency Extension
ML17310A8361993-11-16016 November 1993
Proposed Tech Specs Table 4.2-4, Min Staffing Requirements for PVNGS Emergencies, in Support of Proposed Rev to Emergency Plan
ML17310A7421993-10-27027 October 1993
Revised Unit 1 SG Tube Insp Plan.
ML17310A7351993-10-26026 October 1993
Proposed Tech Specs Changing Maximum Nominal Enrichment of Fuel Allowed to Be Used in Reactor Core
ML17310A6501993-09-17017 September 1993
Unit 1 SG Tube Insp Plan.
ML17310A6161993-09-0808 September 1993
Proposed Tech Specs Section 6.9.1.10 Re Sys 80 Inletflow Distribution to List of Methods Used to Determine Core Operating Limits
1999-09-29
[Table view] |
Text
~ OR 1NFORMATION ON Jg TABLE 3.3-5 (Continued)
I ENGINEERED SAFETY FEATURES RESPONSE TIt1ES INITIATING SIGNAL AND FUNCTION RESPONSE TIt1E IN SECONDS
- 2. Pressurizer Pressure - Low
- a. Safety Injection (HPSI) ( 3PA/3Q)h)k I
"
- b. Safety Injection (LPSI) < 30//30**
- c. Containment Isolation'.
CIAS actuated mini-purge valves < 1Q.:6*/1O.6~*
- 2. Other CIAS actuated valves ( 3] 8/31%A'
- 3. Containment Pressure - High.
~ Safety Injection (HPSI) ( 3Q'A/3Q*A
- b. Safety Injection (LPSI) ( 3Q*/3PA'*
C. Containment Isolation
- 1. CIAS actuated mini-purge valves < 10:6*/1P.6*"
- 2. Other CIAS actuated valves ( 318/3 1)h*
- d. Main Steam Isolation
- 1. MSIS actuated MSIV's 5 6*/5 6A'A
- 2. MSIS actuated MFIV's¹ 1P 6*/1P 68*
- e. Containment Spray Pump ( 33*/23AA'
- 4. Containment Pressure - High-High
- a. Containment Spray 33'4/23'A*
- 5. Steam Generator Pressure - Low
- a. Main Steam Isolation
- 1. MSIS actuated MSIV's < 5.6'/5 6~
- 2. MSIS actuated MFIV's¹ 1P 6A/1P 6m*
- 6. Refueling Mater Tank - Low
- a. Containment Sump Recirculation 45k/45AA
- 7. Steam Generator Level - Low
- a. Auxiliary Feedwater (Motor Drive) ( 46k/235th
- b. Auxiliary Feedwater (Turbine Drive)¹¹¹ < o4 /'IG PALO VERDE " UNIT 1 3/4 3-29 At'1EHD11ENT NP. "5 9307080270 930630. V PDR ,ADOCK 05000528 P PDR
I
~ DR INFORMATiON ONI+
TABLE 3.3-5 (Continued)
I ENGINEERED SAFETY FEATURES RESPONSE TIMES INITIATING SIGNAL AND FUNCTION RESPONSE TIME IN SECONDS
- 2. Pressurizer Pressure - Low
- a. Safety Injection (HPSI) < 30I/30"*
E I
- b. Safety Injection (LPSI) < 30%/30""
i
- c. Containment Isolation
- l. CIAS actuated mini-purge valves < 10.'6~/10.6~"
- 2. Other CIAS actuated valves
~
( 31k/31AR
- 3. Pressure - High
'ontainment
- a. Safety Injection (HPSI) ( 30'P/30*8
- b. Safety Injection (LPSI) 3P*/3P**
- c. Containment Isolation
- 1. CIAS actuated mini-purge valves 1P 6w/10 6**
- 2. Other CIAS actuated valves 31k/I 31k*
- d. Main Steam Isolation 1; HSIS actuated MSIV's ( 5 6*/5 6'A*
- 2. HSIS actuated MFIV's¹ 1P 6w/10 6aa
- e. Containment Spray Pump (
- High-High 33*/23%A'ontainment Press ur e
- a. Containment Spray ( 33'k/23k'A
- 5. Steam Generator Pressure - Low
- a. Hain Steam Isolation
- 1. HSIS actuated HSIV's
- 2. MSIS actuated MFIV's¹ 1P 6A/10 68*
- 6. Refueling Water Tank - Low
- a. Containment Sump Recirculation 45*/45AA
- 7. Steam Generator Level - Low
- a. Auxiliary Feedwater (Motor Drive) 46",/23"*
b, Auxiliary 'Feedwater (Turbine Drive)¹¹¹ I
PALO VERDE - UNIT 2 3/4 3-29 AMENDMENT Np.
e'GR INFORMATlON O~
TABLE 3.3-5 (Continued)
ENGINEERED SAFETY FEATURES RESPONSE TIMES t
INITIATING SIGNAL AND FUNCTION RESPONSE TIME IN SECONDS
- 2. Pressurizer Pressure - Low I
- a. Safety Injection (HPSI) 3 P P/3 Q**
t
- b. Safety Injection (LPSI) 30)/3PAA
- c. Containment Isolation
- 1. CIAS actuated mini-purge valves, 10'm/10
- 2. Other CIAS actuated valves 31 Jc/3] A*
- 3. Containment Pressure - High
- a. Safety Injection (HPSI) 30)k/30).R
- b. Safety Injection (LPSI) 3P*/3 0'4'8
- c. Containment Isolation i
- 1. CIAS actuated mini-purge valves < 10'*/10. 6""
- 2. Other CIAS actuated valves 3 1k/3PA A
- d. Hain Steam Isolation
- 1. HSIS actuated HSIV's < 5 6~/5 6**
2.. HSIS actuated HFIV's/I'.
< 10.6~/10.6~
Containment Spray Pump 33*/23**
- 4. Containment Pressure High-High
- a. Containment Spray 33
'P.
/2 3 A
- 5. Steam Generator Pressure - Low
- a. Hain Steam Isolation
- 1. llSIS actuated HSIV's 6 /5 6AA
- 2. HSIS act.uated HFIV'// < 10. 6 /10. 6""
- 6. Refueling Water Tank - Low
- a. Containment Sump Recirculation 4 58/4 5'8 8
- 7. Steam Generator Level - Low
- a. Auxiliary Feedwater (Motor Drive) 46"/23""
- b. Auxiliary Feedwat,er (Turbine Drive)////// z q g /'lt
(
I PALO VERDE - UNIT 3 3/4 3-29 AllENDHENT Np.
~ '
