ML13184A269: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
| issue date = 07/02/2013
| issue date = 07/02/2013
| title = R16 Inservice Inspection Report Summary
| title = R16 Inservice Inspection Report Summary
| author name = Pierce C R
| author name = Pierce C
| author affiliation = Southern Nuclear Operating Co, Inc
| author affiliation = Southern Nuclear Operating Co, Inc
| addressee name =  
| addressee name =  
Line 15: Line 15:


=Text=
=Text=
{{#Wiki_filter:Charles R. Pierce Southern Nuclear Regu l at o ry A ff a i rs Di rector Operating Company, Inc. 4 0 I n v e rness Cen te r Par kwa y Po s t Of f ic e Box 1295 B i r min gham, A l a b a m a 352 0 1 Te l 2 0 5.992.7872 F ax 205.992.7601 SOUIHERN ' \ July 2, 2013 COMPANY Docket Nos.: 50-425 NL-13-1436 U. S. Nuclear Regulatory Commission AnN: Document Control Desk Washington , D. C. 20555-0001 Vogtle Electric Generating Plant -Unit 2 2R16 Inservice Inspection Report Summary Ladies and Gentlemen: Southern Nuclear Operating Company (SNC) submits herewith the Vogtle Electric Generating Plant Unit 2, Interval 3, Period 2, Outage 2 Inservice Inspection Summary Report (Enclosure).
{{#Wiki_filter:Charles R. Pierce           Southern Nuclear Regu latory Affairs Director Operating Company, Inc.
This report describes and summarizes the inservice inspection activities performed during the spring 2013 maintenance I refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI , 2001 Edition with addenda through 2003 requires submittal of the enclosed report. The supporting inservice inspection documentation, e.g., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant. Please note that on Tab F of the Enclosure, Sheet 2 of 3 and Sheet 3 of 3 for Traveler #11110 are the best copies available to SNC. This letter contains no NRC commitments. If you have any questions, please contact Ken McElroy at (205) 992-7369.
40 Inverness Cen ter Parkway Post Office Box 1295 Birmingham, Alabama 35201 Tel 205.992.7872 Fax 205.992.7601 SOUIHERN ' \
Respectfully submitted, C. R. Pierce Regulatory Affairs Director CRP/RMJ/lac U. Nuclear Regulatory Commission NL-1 436 2 Vogtle Electric Generating Plant -Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval 3, Period 2, Outage 2, A -F cc: Mr. Kuczynski, Chairman, President  
July 2,           2013                                                         COMPANY Docket Nos.: 50-425                                                       NL-13-1436 U. S. Nuclear Regulatory Commission AnN: Document Control Desk Washington , D. C. 20555-0001 Vogtle Electric Generating Plant - Unit 2 2R16 Inservice Inspection Report Summary Ladies and Gentlemen :
& Mr. D. G. Executive Vice President  
Southern Nuclear Operating Company (SNC) submits herewith the Vogtle Electric Generating Plant Unit 2, Interval 3, Period 2, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the spring 2013 maintenance I refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI , 2001 Edition with addenda through 2003 requires submittal of the enclosed report.
& Chief Nuclear Officer Mr. T. Tynan, President  
The supporting inservice inspection documentation, e.g ., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant.
-Vogtle Mr. B. L. Ivey, President  
Please note that on Tab F of the Enclosure, Sheet 2 of 3 and Sheet 3 of 3 for Traveler
-Regulatory Affairs Mr. J. Adams, Vice President  
#11110 are the best copies available to SNC.
-Fleet Operations RType: CVC7000 Mr. V. M. Regional Mr. R. E. Martin, NRR Senior Project Manager -Mr. L. M. Cain, Senior Resident Inspector  
This letter contains no NRC commitments. If you have any questions, please contact Ken McElroy at (205) 992-7369.
-
Respectfully submitted, C. R. Pierce Regulatory Affairs Director CRP/RMJ/lac
Vogtle Electric Generating Plant Unit 2R16 Report Vogtle Electric Generating Plant -Unit Inservice Inspection Refueling Outage (2R16), Interval Period Outage 2, A SO U THER N_ SOUTHERN C OMPANY COMPANY INSERVICE INSPECTION REFUELING INTERVAL PERIOD OUTAGE Vogtle Electric Generating Unit (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830) Southern Nuclear Operating 40 Inverness Birmingham, Alabama COMMERCIAL OPERATION DATE: May 20,1989 DOCUMENT COMPLETION DATE: June 2013 VOGTLE ELECTRIC GENERATING (VEGP) PLANT 2R16 FINAL REPORT TABLE OF CONTENTS VOLUME 1 (OWNER'S REPORT)
 
* INTRODUCTION AND A
U. Nuclear Regulatory Commission NL-1   436 2
* ASME FORM NIS-1 AND B
 
==Enclosure:==
Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval 3, Period 2, Outage 2,       A-F cc:
Mr.       Kuczynski, Chairman, President &
Mr. D. G.       Executive Vice President & Chief Nuclear Officer Mr. T. Tynan,       President - Vogtle Mr. B. L. Ivey,     President - Regulatory Affairs Mr. J. Adams, Vice President - Fleet Operations RType: CVC7000 Mr. V. M.         Regional Administrator Mr. R. E. Martin, NRR Senior Project Manager - Vogtle Mr. L. M. Cain, Senior Resident Inspector - Vogtle
 
Vogtle Electric Generating Plant Unit 2 2R16                     Report Summary Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval Period Outage 2,   A~F
 
SOUTHERN _                                        SOUTHERN COMPANY                                            COMPANY INSERVICE INSPECTION REPORT REFUELING 16 INTERVAL 3 PERIOD 2 OUTAGE 2 Vogtle Electric Generating Plant Unit 2 (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830)
Southern Nuclear Operating Company 40 Inverness Parkway Birmingham, Alabama 35242 COMMERCIAL OPERATION DATE: May 20,1989 DOCUMENT COMPLETION DATE: June 2013
 
VOGTLE ELECTRIC GENERATING (VEGP)
PLANT 2R16 FINAL REPORT TABLE OF CONTENTS VOLUME 1 (OWNER'S REPORT)
* INTRODUCTION AND ABBREVIATIONS                                            A
* ASME FORM NIS-1 AND ABSTRACT                                              B
* INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)  
* INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)  


==SUMMARY==
==SUMMARY==
CLASS 1 AND 2 WELDS AND SUPPORT C SYSTEM PRESSURE D REPORTABLE INDICATION E
 
* OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (ASME F VOLUME 2 (151 EXAMINATION DATA) EXAMINATION PROGRAM PLAN SCOPE  
CLASS 1 AND 2 WELDS AND SUPPORT EXAMINATIONS                          C SYSTEM PRESSURE TESTS                                                D REPORTABLE INDICATION  
 
==SUMMARY==
E
* OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (ASME FORM                    F VOLUME 2 (151 EXAMINATION DATA)
* EXAMINATION PROGRAM PLAN           SCOPE  
 
==SUMMARY==
)                        G
* lSI EXAMINATION DATA                                                      H VOLUME 3 (CERTIFICATIONS)
* PERSONNEL CERTIFICATIONS                                                  I
* EXAMINATION PROCEDURES                                                    J
* EQUIPMENT CERTIFICATIONS & CALIBRATION BLOCKS (LISTING)                  K VOLUME 4 (FLOW ACCELERATED                HO:SIUIN - FAC)
* FAC EXAMINATION


==SUMMARY==
==SUMMARY==
) G H* lSI EXAMINATION DATA VOLUME 3 (CERTIFICATIONS)
L
* PERSONNEL I
* FAC EXAMINATION DATA                                                      M VOLU       1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A  
* EXAMINATION J
* EQUIPMENT CERTIFICATIONS
& CALIBRATION BLOCKS K VOLUME 4 (FLOW ACCELERATED HO:SIUIN -F AC)
* FAC EXAMINATION L
* FAC EXAMINATION M VOLU 1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A  


==SUMMARY==
==SUMMARY==
REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE. VOLU 2 AND CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS ON SITE VOLU CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION (FAC)
REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE.
PERFORMED ON SITE BY SOUTHERN_
VOLU       2 AND 3 CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS PERFORMED ON SITE BY VOLU       4 CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION (FAC) INSPECTIONS PERFORMED             ON SITE BY VEGP) 1
COMPANY COMPANY SOUTHERN OPERA TING ENGINEERING INSERVICE PLANT VOGTLE UNIT REFUELING OUTAGE SPRING Volume Owner's TAB INTRODUCTION AND This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 2 (VEGP-2) between October 12, 2011 &end of the fifteenth (15 th) maintenance/refueling outage, 2R15} and April 3, 2013 of the sixteenth (16 1 ) outage, 2R16} to meet the requirements of Article IWA-6000 of the American Society of Mechanical Boiler and Pressure Vessel Section XI, 2001 Edition with 2003 Addenda This and/or which were documented since the last at VEGP-2 through the completion of the sixteenth maintenance/refueling outage on April 3, 2013 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form are included herein. This report includes a summary of the steam generator tube inspections which are required per VEGP Technical 5.6.10. The detailed information will be provided in a one hundred (180) after the initial entry into MODE 4 following com of an inspection performed in accordance with Technical Specification 5.5.9. A summary these inspections is included behind Tab B in the Abstract.
 
1-1 LIST OF ACC AD AFW AI AN II ASME ASNT ASTM BC CCW CH CR CS CVCS FAC FB FNF FW GPC HHSI HL HX IND INF lSI 10 IR LB LD LMT LU LU-I LU-O M MS MT NCI NDE Acceptable AnchorlDarling Auxiliary Feedwater System SNC Action Item (followed by unique no. denoting Action Item number) Authorized Nuclear Inspector American Society Mechanical Engineers American Society for Nondestructive Testing American Society for Testing and Materials Branch Connection Centrifugally Cast Stainless Steel Component Cooling Water Combustion Engineering Head Condition Report Containment Spray Chemical Volume Control System Downstream Eddy rrent Examination Evaluation Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion")
SOUTHERN ~                    SOUTHERN_
Flange Bolting FAC Notification Report Feedwater System Final Safety Analysis Report (includes thereto) Indications Georgia Power Company High Head Injection Hanger Heat Exchanger Hydraulic Snubber NRC Information Notice (may shown as "IN" followed by unique no. denoting number) Indication Indication Notification Inservice Inspection Inservice Testing Improved Technical Specification I nside Diameter Inside Large Longitudinal Seam Weld Extending Downstream Longitudinal Seam Weld Downstream Inside Radius of Longitudinal Seam Weld Downstream Outside of Elbow Lambert, MacGiII Thomas Longitudinal Weld Extending Upstream Longitudinal Weld Upstream Inside Longitudinal Seam Weld Upstream Mechanical Snubber Main Steam System Magnetic Particle Examination Nonconformance Item Nondestructive Examination LIST OF ABBREVIATIONS  
COMPANY                       COMPANY SOUTHERN NUCLEAR OPERA TING COMPANY ENGINEERING PROGRAMS DEPARTMENT INSERVICE INSPECTIONS PLANT VOGTLE UNIT 2 REFUELING OUTAGE 16 SPRING 2013 Volume 1 Owner's Report
-(continued)
 
NI NRC NRC-B NRI NSCW OR PL PM PR PROF PS PSA PSI PT RCS RCP RHR RI RLW RL RPV RR RWST SAT SCS SI SNC SUP T&C TDAFW UNSAT US UT VEGP VT W No Indication United States Nuclear Regulatory NRC Bulletin (followed by unique no. No Recordable Indication Nuclear Service Cooling Water Outside Radius Pipe Lug Paul-Munroe EN ERTECH Pipe Restraint Profile Pipe Support Pacific Scientific Preservice Inspection Liquid Penetrant Reactor Coolant System Reactor Coolant Pump Residual Heat Removal Recordable Indication Refracted Longitudinal Wave Restraint Lug Reactor iJr""""', Relief Request (followed by unique no. Refueling Water Tank Satisfactory Small Southern Company Services Safety Injection System Southern Nuclear Operating Company Supplemental Data Thickness and Contour Turbine Driven Auxiliary Technical Evaluation (fol number) Unsatisfactory Examination Upstream Ultrasonic Examination Vogtle Electric Generating Plant (common u to designate a specific plant unit) Visual Examination Westinghouse Bulletin number) evaluation followed by "-1" or" ASME FORM NIS-1 AND
TAB A INTRODUCTION AND ABBREVIATIONS
* Form
 
* Abstract FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS Owner: Southern Nuclear for 40 Inverness Center Birmingham, AL 2. Vogtle Electric Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830 3. Plant Unit: Two 4. Owner Certification of Authorization:
This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 2 th (VEGP-2) between October 12, 2011 &end of the fifteenth (15 ) maintenance/refueling outage, 2R15} and 1
N/A 5. Commercial Service Date: 05/20/89 6. National Board Number for Unit: N/A 7. Components Component or Manufacturer or Manufacturer or Installer State or National Board Appurtenance Installer and Serial Number Province Number Address Number Reactor 7372 N/A 22004 Pressure Vessel Reactor Coolant 5*9744D35G01 N/A 37 Pump4 Steam GBGT 1981, GBGT 1 N/A 33,34. 36 Generators 1 Pensacola, FL GBGT 1983, GBGT 1 thru 4 Injection 52230 N/A 447 Pump Train "B" CA Residual Heat Joseph Oat 2322-2D N/A 1051 Removal Heat NJ Exchanger, Train "B" Centrifugal Huntington Pumps 52236 N/A
April 3, 2013       of the sixteenth (16 )                           outage, 2R16} to meet the requirements of Article IWA-6000 of the American Society of Mechanical                             Boiler and Pressure Vessel Section XI, 2001 Edition with 2003 Addenda This                                                       and/or               which were documented since the last                                   at VEGP-2 through the completion of the sixteenth maintenance/refueling outage on April 3, 2013 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form                   are included herein.
* 413 Charging Pump, Huntington CA Train HB" Pullman Power System Numbers 1201, 1 N/A N/A Products, 1204, 1205, 1 1 Williamsport, PA 1301,1302, & 1501 2-1 FORM NIS-1 (Back) 8. Examination Dates: October 12, 2011 to April 3 , 2013 9. Inspection Period Identification:
This report includes a summary of the steam generator tube inspections which are required per VEGP Technical                 5.6.10. The detailed information will be provided in a                   one hundred         (180)       after the initial entry into MODE 4 following com         of an inspection performed in accordance with Technical Specification 5.5.9. A summary these inspections is included behind Tab B in the Abstract.
Second Period Inspection Interval Identification:
1-1
Third Inspection Interval Applicable Edition of Section XI 2001 Addenda 2003 12. Date/Revision of Inspection Plan: Volume 1 -12/12/12, Version 7.0; Volume 3 -12/8/11, Version 2.0; Volume 4 -1/25/13, Version 6.0; Volume 5 -2/22/13, Version 4.0; Volume 6 -12/15/11, Version 4.0 Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings) Abstract of Results of Examinations and Tests. (See Abstract) Abstract of Corrective Measures. (See Abstract)
 
We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c . easures taken conform to the rules of the ASME Code, Section XI. Certificate of Authorization No. (if applicable)
LIST OF ABBREVIATIONS ACC       Acceptable AD         AnchorlDarling AFW       Auxiliary Feedwater System AI         SNC Action Item (followed by unique no. denoting Action Item number)
N/A Date: t,-
AN II     Authorized Nuclear            Inspector ASME       American Society Mechanical Engineers ASNT       American Society for Nondestructive Testing ASTM       American Society for Testing and Materials BC        Branch Connection Centrifugally Cast Stainless Steel CCW        Component Cooling Water Combustion Engineering CH                   Head CR         Condition Report CS         Containment Spray CVCS       Chemical        Volume Control System Downstream Eddy      rrent Examination Evaluation FAC       Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion")
2013 Signed: o Geor CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford, CT have inspected the components described in this Owner's Report during the period October 12, 2011 to April 3, 2013, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code , Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
FB        Flange Bolting FNF        FAC Notification Report FW        Feedwater System Final Safety Analysis Report (includes          thereto)
Commission:
Indications GPC        Georgia Power Company HHSI      High Head           Injection HL        Hanger HX        Heat Exchanger Hydraulic Snubber NRC Information Notice (may             shown as "IN" followed by unique no. denoting           number)
c'1J 93 '8 'YlnSpector's National Board, State, Province, and Endorsements Date: '2 :JtJl\e...
IND        Indication INF        Indication Notification lSI        Inservice Inspection Inservice Testing Improved Technical Specification 10        Inside Diameter IR        Inside LB        Large LD        Longitudinal Seam Weld Extending Downstream Longitudinal Seam Weld Downstream Inside Radius of Longitudinal Seam Weld Downstream Outside               of Elbow LMT        Lambert, MacGiII         Thomas LU        Longitudinal         Weld Extending Upstream LU-I      Longitudinal         Weld Upstream Inside LU-O      Longitudinal Seam Weld Upstream M          Mechanical Snubber MS        Main Steam System MT        Magnetic Particle Examination NCI        Nonconformance Item NDE        Nondestructive Examination 1*2
20& 2-2 ABSTRACT -ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code, Section XI, 2001 Edition (Code), with the 2003 Addenda, is the code for conducting in service inspection activities during the third inspection interval at VEGP-2. Examinations and tests required by the Code are scheduled in accordance with "Inspection Program B n as defined in Code paragraphs IWB-2412 and IWC-2412.
 
This "Owner's for Inservice is for those second examinations and tests which were performed between (end of the 2R15 and April 3, 2013 (end of the 2R16 outage). VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federal Register Notices 64 FR 51370 dated September 22, 1999, as later modified by 69 dated October 1, 2004. The initial Rule specified the 1995 Edition with Addenda 1996 as the edition of ASME Section XI, Appendix VIII. The 2004 Rule the Edition with caveats. VEGP except where requests for technical alternatives or exemptions have been approved, complied with the ,,,,rr,,,,nrc for implementation of the Appendix VIII the EPRI Performance Demonstration Initiative (PDI). In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and documented at VEGP-2 since 2R15 through the end of 2R16. Class 1 and Class 2 Owner's Reports for Repairs or Replacements NIS-2) are provided herein. It should be noted that Authorized Nuclear Inservice (ANII) services were provided for those examinations and tests the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category.
LIST OF ABBREVIATIONS - (continued)
Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT) and visual testing (VT) methods, as applicable.
NI   No Indication NRC  United States Nuclear Regulatory NRC-B NRC Bulletin (followed by unique no.      Bulletin number)
Specific components and examination areas are itemized in the applicable portions of this document. During the scope of VEGP-2 examinations conducted, no Class 1 components were observed to have indications.
NRI   No Recordable Indication NSCW Nuclear Service Cooling Water OR   Outside Radius PL   Pipe Lug PM   Paul-Munroe EN ERTECH PR   Pipe Restraint PROF Profile PS   Pipe Support PSA   Pacific Scientific PSI   Preservice Inspection PT   Liquid Penetrant RCS   Reactor Coolant System RCP   Reactor Coolant Pump RHR   Residual Heat Removal RI   Recordable Indication RLW   Refracted Longitudinal Wave RL   Restraint Lug RPV   Reactor iJr""""',
SNC defines "reportable as those indications exceeding standard of ASME XI. Since there were no observed Class 1 reportable n/'1I....
RR   Relief Request (followed by unique no.
there will not be any entries in Tab E for of Class 1 components.
RWST  Refueling Water          Tank SAT  Satisfactory Small SCS   Southern Company Services SI   Safety Injection System SNC   Southern Nuclear Operating Company SUP   Supplemental Data T&C   Thickness and Contour TDAFW Turbine Driven Auxiliary Technical Evaluation (fol                                    evaluation number)
It should also be noted that no indications were "identified" which dispositions to acceptance standards.
UNSAT Unsatisfactory Examination US    Upstream UT    Ultrasonic Examination VEGP Vogtle Electric Generating Plant (common u    followed by "-1" or" to designate a specific plant unit)
Three Class 1 and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI examination coverage to be attained.
VT    Visual Examination W    Westinghouse 1-3
As noted the subject code case has been by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometriC configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief process as allowed by 10 CFR 50.55a.
 
Southern Nuclear Company contracted WesDyne to support Reactor Vessel Head Inspections during the 2R 16 outage. The requirement for tooling was unique to VogUe compared to the normal operation due to distance required from the floor to the head equipment was built to operate to these requirements.
TABB ASME FORM NIS-1 AND ABSTRACT
were the Electric Power in 2009. In addition to the personnel were also demonstrated and These demonstrations did require some from the previous in 2006 which enhanced the "cr,ot'l',,,,, One of the requirements was to utilize both the circumferential and axial shooting TOF techniques for the required volume utilizing Code Case N-729-1. This requirement lead to development and deployment of 2 blade which has both TOF directions with a zero degree for leak path assessment which was also demonstrated and qualified at PDI with the open probes. No in-service was reported with the RPV CRDM examinations.
* Form NIS-1
Some examination limitations occurred which Southern Nuclear had previously addressed with Alternative VEGP-ISI-ALT-07, 7/19/2012 (ML121 ",,,,n,s:..vv Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI the performance of a test (IWB-5221) each outage. This system leakage test (14910-201) was performed prior to plant startup the refueling outage. These visual examinations revealed minor and boron residue at mechanical connections.
* Abstract
These leakage conditions were either corrected or evaluated and determined  
 
<:lr-r'o,...'r!>
FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS
for continued operation.
: 1. Owner:        Southern Nuclear                                 for      Power 40 Inverness Center            Birmingham, AL 35242
Of particular interest to the system leakage test is the seal cap enclosures on four Class 1 check valves. The VT -2 examination was performed with these seal cap enclosures in which could prevent pressure boundary from being detected.
: 2. Plant:        Vogtle Electric             Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830
Southern Nuclear submitted an alternative to the NRC requesting approval to the VT-2 examination with the seal caps installed.
: 3. Plant Unit: Two
NRC approval forthe alternative examination is documented in NRC Accession No. ML 13123A 1 "Vogtle Electric Plant, Units 1 and 2 -Safety Evaluation of Relief Request Version 2.0, Regarding Tests for Reactor Coolant Pressure Boundary (TAC NOS. MF0673 AND MF0674)" dated May 7,2013. No evidence of leakage was observed during the VT-2 examination performed during the leakage test with the seal cap enclosures installed.
: 4. Owner Certification of Authorization: N/A
Selected Class 2 were examined Southern Nuclear Company (SNC) personnel utilizing ultrasonic testing (UT). liquid penetrant (PT). and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.  
: 5. Commercial Service Date: 05/20/89
.. During the scope of VEGP-2 examinations conducted, no Class 2 components were observed to have indications.
: 6. National Board Number for Unit: N/A
SNC defines "reportable as those indications exceeding  
: 7. Components Component or       Manufacturer or         Manufacturer or Installer     State or     National Board Appurtenance       Installer and           Serial Number                 Province     Number Address                                               Number Reactor                                     7372                         N/A           22004 Pressure Vessel Reactor Coolant                             5*9744D35G01                 N/A           37 Pump4 Steam                                       GBGT 1981, GBGT 1             N/A           33,34. 36 Generators 1       Pensacola, FL           GBGT 1983, GBGT 1 thru 4 Injection                           52230                         N/A           447 Pump Train "B"                         CA Residual Heat       Joseph Oat             2322-2D                       N/A           1051 Removal Heat                   NJ Exchanger, Train "B" Centrifugal         Huntington Pumps       52236                         N/A
",n."*If'.., standard of ASME XI. Since there were no observed Class 2 reportable there will not be any entries in Tab E for of Class 2 It should also be noted that no indications were "identified" which standards.
* 413 Charging Pump,     Huntington         CA Train HB" Pullman Power           System Numbers 1201, 1       N/A           N/A Products,               1204, 1205, 1     1 Williamsport, PA       1301,1302, & 1501 2-1
No class 2 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. 2-4 Class 2 System Pressure Tests Table IWC-2500-1, Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the "System Pressure Tests" portion of this report document.
 
The visual examinations performed during these system leakage tests found only minor leakage or residue at mechanical joints such as valve stem packing and at flanged connections.
FORM NIS-1 (Back)
These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.
: 8. Examination Dates: October 12, 2011 to April 3, 2013
Steam Generator Tube Inspections The scope of the Vogtle 2R16 steam generator examinations, as scheduled, is listed below. The inspection plan met or exceeded the requirements of the ERPI PWR Steam Generator Examination Guidelines, revision 7, and was aligned with the SNC SG Program Strategic Plan, NMP-ES-004-GL01, version 11. The SG inspection program addressed the known degradation mechanisms observed in VogUe Unit 2 in prior inspections as well as potential degradation mechanisms.
: 9. Inspection Period Identification: Second Period
The program also addressed inspection requirements related to the implementation of the permanent H* alternate repair criteria (PARC).
: 10. Inspection Interval Identification: Third Inspection Interval
: 11. Applicable Edition of Section XI 2001 Addenda 2003
: 12. Date/Revision of Inspection Plan: Volume 1 - 12/12/12, Version 7.0; Volume 3 - 12/8/11, Version 2.0; Volume 4 - 1/25/13, Version 6.0; Volume 5 - 2/22/13, Version 4.0; Volume 6 - 12/15/11, Version 4.0
: 13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings)
: 14. Abstract of Results of Examinations and Tests. (See Abstract)
: 15. Abstract of Corrective Measures. (See Abstract)
We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c             . easures taken conform to the rules of the ASME Code, Section XI.
Certificate of Authorization No. (if applicable) N/A Date: t, -     2.r~ 2013     Signed:
o Geor CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford, CT have inspected the components described in this Owner's Report during the period October 12, 2011 to April 3, 2013, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report.
Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commission:       c'1J 93 '8
      'YlnSpector's Signature                              National Board, State, Province, and Endorsements Date:     '2 ~ :JtJl\e...               20&
2-2
 
ABSTRACT - ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code, Section XI, 2001 Edition (Code), with the 2003 Addenda, is the                   code for conducting inservice inspection activities during the third           inspection interval at VEGP-2. Examinations and tests required by the Code are scheduled in accordance with "Inspection Program Bn as defined in Code paragraphs IWB-2412 and IWC-2412. This "Owner's for Inservice                   is for those second                   examinations and tests which were performed between                               (end of the 2R15                                   and April 3, 2013 (end of the 2R16                                 outage).
VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federal Register Notices 64 FR 51370 dated September 22, 1999, as later modified by 69                         dated October 1, 2004. The initial Rule specified the 1995 Edition with Addenda                     1996 as the           edition of ASME Section XI, Appendix VIII. The 2004 Rule                         the     Edition with       caveats. VEGP         except where requests for               technical alternatives or exemptions have been approved, complied with the
      ,,,,rr,,,,nrc for             implementation of the             Appendix VIII                     the EPRI Performance Demonstration Initiative (PDI).
In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and                       documented at VEGP-2 since 2R15 through the end of 2R16. Class 1 and Class 2 Owner's Reports for Repairs or Replacements                   NIS-2) are provided herein.
It should be noted that Authorized Nuclear Inservice                     (ANII)           services were provided for those examinations and tests                       the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category. Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT) and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.
* During the scope of VEGP-2 examinations conducted, no Class 1 components were observed to have                   indications. SNC defines "reportable as those indications exceeding standard of ASME XI. Since there were no observed Class 1 reportable n/'1I.... :::tlll"lrl~
there will not be any entries in Tab E for                 of Class 1 components. It should also be noted that no indications were "identified" which               dispositions to acceptance standards.
Three           Class 1         and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI                             examination coverage to be attained. As noted               the subject code case has been                     by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometriC configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief               process as allowed by 10 CFR 50.55a.
2*3
 
Southern Nuclear               Company contracted WesDyne to support Reactor Vessel Head Inspections during the 2R 16               outage. The requirement for tooling was unique to VogUe compared to the normal operation due to         distance required from the floor to the head                     equipment was built to operate to these requirements.
were                     the Electric Power in 2009. In addition to the personnel were also demonstrated and               These                 demonstrations did require some             from the previous             in 2006 which enhanced the "cr,ot'l',,,,,
One of the requirements was to utilize both the circumferential and axial shooting TOF techniques for the required volume                 utilizing Code Case N-729-1. This requirement lead to development and deployment of                           2 blade       which has both TOF directions with a zero degree for leak path assessment which was also demonstrated and qualified at PDI                   with the open probes.
No in-service                 was reported with the RPV CRDM examinations. Some examination limitations occurred which Southern Nuclear had previously addressed with Alternative VEGP-ISI-ALT-07, 7/19/2012 (ML121 ",,,,n,s:..vv Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI             the performance of a                   test (IWB-5221) each               outage. This system leakage test (14910-201) was performed prior to plant startup                   the refueling outage.
These visual examinations revealed minor                 and boron residue at mechanical connections. These leakage conditions were either corrected or evaluated and determined <:lr-r'o,...'r!>     for continued operation.
Of particular interest to the system leakage test is the seal cap enclosures on four Class 1 check valves.
The VT -2 examination was performed with these seal cap enclosures in               which could prevent pressure boundary               from being detected. Southern Nuclear submitted an alternative to the NRC requesting approval to               the VT-2 examination with the seal caps installed. NRC approval forthe alternative examination is documented in NRC Accession No. ML13123A 1               "Vogtle Electric Plant, Units 1 and 2             - Safety Evaluation of Relief Request                         Version 2.0, Regarding               Tests for Reactor Coolant Pressure Boundary                     (TAC NOS. MF0673 AND MF0674)" dated May 7,2013. No evidence of leakage was observed during the VT-2 examination performed during the             leakage test with the seal cap enclosures installed.
Selected Class 2                   were examined       Southern Nuclear               Company (SNC) personnel utilizing ultrasonic testing (UT). liquid penetrant (PT). and visual testing (VT) methods, as applicable.
Specific components and examination areas are itemized in the applicable portions of this document.
.. During the scope of VEGP-2 examinations conducted, no Class 2 components were observed to have               indications. SNC defines "reportable as those indications exceeding ",n."*If'..,
standard of ASME XI. Since there were no observed Class 2 reportable there will not be any entries in Tab E for             of Class 2                 It should also be noted that no indications were "identified" which                                         standards.
No class 2 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas.
2-4
 
Class 2 System Pressure Tests Table IWC-2500-1, Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the "System Pressure Tests" portion of this report document. The visual examinations performed during these system leakage tests found only minor leakage or residue at mechanical joints such as valve stem packing and at flanged connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.
Steam Generator Tube Inspections The scope of the Vogtle 2R16 steam generator examinations, as scheduled, is listed below. The inspection plan met or exceeded the requirements of the ERPI PWR Steam Generator Examination Guidelines, revision 7, and was aligned with the SNC SG Program Strategic Plan, NMP-ES-004-GL01, version 11. The SG inspection program addressed the known degradation mechanisms observed in VogUe Unit 2 in prior inspections as well as potential degradation mechanisms. The program also addressed inspection requirements related to the implementation of the permanent H* alternate repair criteria (PARC).
* 100% Bobbin examination of tubes in SGs 2 and 3 full length except for Rows 1 and 2, which are inspected from tube end to tube support plate (TSP) #7 from both hot leg (HL) and cold leg (CL).
* 100% Bobbin examination of tubes in SGs 2 and 3 full length except for Rows 1 and 2, which are inspected from tube end to tube support plate (TSP) #7 from both hot leg (HL) and cold leg (CL).
* 100% +Point examination of Row 1 and Row 2 U-bends from the top TSP on the HL to the top TSP on the CL in SGs 2 and 3. * +Point examination of Special Interest, HL and CL, of bobbin possible flaw locations including bends.
* 100% +Point examination of Row 1 and Row 2 U-bends from the top TSP on the HL to the top TSP on the CL in SGs 2 and 3.
* 100% +Point examination at HL tubes in SGs 2 and 3 from the top of tubesheet (TTS) to the licensed Permanent Alternative Repair Criteria (ARC) depth for H* (tubesheet region on HL side (TSH) +3/-15.2 inches). This inspection captured the TTS BLGI OXP populations, as defined below, along with the required periodic sample specified in the regulatory approval of ARC. BLG = differential mix diameter discontinuity signal within the tubesheet of 18 volts or greater as measured by bobbin coil probe; OXP = a tube diameter deviation within the tubesheet of 1.5 mils or greater as measured by bobbin coil profile analysis.
    *   +Point examination of Special Interest, HL and CL, of bobbin possible flaw locations including U bends.
* 100% +Point examination of total dents and dings 2 volts in SGs 2 and 3 HL straight lengths and U-bends.
* 100% +Point examination at HL tubes in SGs 2 and 3 from the top of tubesheet (TTS) to the licensed Permanent Alternative Repair Criteria (ARC) depth for H* (tubesheet region on HL side (TSH) +3/-15.2 inches). This inspection captured the TTS BLGI OXP populations, as defined below, along with the required periodic sample specified in the regulatory approval of ARC.
BLG = differential mix diameter discontinuity signal within the tubesheet of 18 volts or greater as measured by bobbin coil probe; OXP = a tube diameter deviation within the tubesheet of 1.5 mils or greater as measured by bobbin coil profile analysis.
* 100% +Point examination of total dents and dings     ~ 2 volts in SGs 2 and 3 HL straight lengths and U-bends.
* 100% Visual inspection of tube plugs in SGs 2 and 3.
* 100% Visual inspection of tube plugs in SGs 2 and 3.
* Visual inspection in SGs 2 and 3 of channel head primary side HL and CL in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".
* Visual inspection in SGs 2 and 3 of channel head primary side HL and CL in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".
Steam Generator Inspection Expansion Based on the confirmation of ODSCC at the hot leg tubesheet expansion transitions in SG2, expansion of the eddy current program was conducted in SGs 1 and 4 with a minimum scope of 20% +Point of tubesheet  
Steam Generator Inspection Expansion Based on the confirmation of ODSCC at the hot leg tubesheet expansion transitions in SG2, expansion of the eddy current program was conducted in SGs 1 and 4 with a minimum scope of 20% +Point of tubesheet +3/-15.2 inches along with a 100% inspection of tube plugs in SGs 1 and 4. This expansion was conducted in accordance with the requirements of the EPRI SG Examination Guidelines.
+3/-15.2 inches along with a 100% inspection of tube plugs in SGs 1 and 4. This expansion was conducted in accordance with the requirements of the EPRI SG Examination Guidelines.
Additionally, visual inspection of the channel head primary side HL and CL of SGs 1 and 4 has been performed as part of the expansion in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".
Additionally, visual inspection of the channel head primary side HL and CL of SGs 1 and 4 has been performed as part of the expansion in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".
2-5 Steam Generator Damage Mechanisms Found and NDE Techniques Utilized Based on SG eddy current and visual inspection results, a new degradation mechanism to Unit 2 was identified.
2-5
The existing degradation mechanisms in the VogUe Unit 2 are: (New) Outer Diameter Stress Corrosion Cracking (ODSCC) at the hot leg tubesheet expansion transitions (A single circumferential ODSCC was identified).  
 
-+Point probe and Ghent probe techniques were used to analyze the indication. Mechanical Wear due to Foreign Objects -+Point and bobbin techniques were used to evaluate the wear. Mechanical Wear at AVB Supports.  
Steam Generator Damage Mechanisms Found and NDE Techniques Utilized Based on SG eddy current and visual inspection results, a new degradation mechanism to Unit 2 was identified. The existing degradation mechanisms in the VogUe Unit 2 are:
-Bobbin techniques were used to evaluate wear. Mechanical Wear and Wall loss from Secondary Side Cleaning Activities.  
    *    (New) Outer Diameter Stress Corrosion Cracking (ODSCC) at the hot leg tubesheet expansion transitions (A single circumferential ODSCC was identified). - +Point probe and Ghent probe techniques were used to analyze the indication.
-Bobbin techniques were used to evaluate wear. The table below presents a summary list of all SG tubes plugged in 2R16 and the related degradation mechanism.
* Mechanical Wear due to Foreign Objects - +Point and bobbin techniques were used to evaluate the wear.
Degradation Plugging Basis Stabilizer SG Row Col Indication Mechanism Installed 2 15 60 SCI 1 ODSCC 3 33% Plug on Detection Yes 3 56 82 PCT 2 AVB 4 Wear 41% Tech Spec Plugging Limit No Notes: 1 -Single Circumferential Indication 2 -Bobbin Volumetric Sizing 3 -Outside Diameter Stress Corrosion Cracking 4 -Anti-Vibration Bar 5 -Percent Through-Wall Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document. During the scope of VEGP-2 examinations conducted, one component support (21302-107 -H004) was observed to have a loose locking nut, which constituted unsatisfactory visual results. In accordance with IWF-3122.3(a) the condition was determined to be acceptable by evaluation.
* Mechanical Wear at AVB Supports. - Bobbin techniques were used to evaluate wear.
* Mechanical Wear and Wall loss from Secondary Side Cleaning Activities. - Bobbin techniques were used to evaluate wear.
The table below presents a summary list of all SG tubes plugged in 2R16 and the related degradation mechanism.
Degradation       %TW~            Plugging Basis             Stabilizer SG     Row     Col   Indication Mechanism                                                   Installed 1                3 2       15     60       SCI         ODSCC           33%           Plug on Detection               Yes 2         4 41%       Tech Spec Plugging Limit           No 3      56      82      PCT        AVB Wear Notes:
1 - Single Circumferential Indication 2 - Bobbin Volumetric Sizing 3 - Outside Diameter Stress Corrosion Cracking 4 - Anti-Vibration Bar 5 - Percent Through-Wall Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document.
* During the scope of VEGP-2 examinations conducted, one component support (21302-107 -H004) was observed to have a loose locking nut, which constituted unsatisfactory visual results. In accordance with IWF-3122.3(a) the condition was determined to be acceptable by evaluation.
Although evaluated to be acceptable the condition identified was corrected under Southern Nuclear MWO SNC475383 with a re-examination occurring after corrective actions were taken. The examination results and corrective action is listed with the Indication Notification section of this report (Reference INF 113V2001).
Although evaluated to be acceptable the condition identified was corrected under Southern Nuclear MWO SNC475383 with a re-examination occurring after corrective actions were taken. The examination results and corrective action is listed with the Indication Notification section of this report (Reference INF 113V2001).
Class MC Containment Examinations (lWE) During the VEGP-2 Spring 2013 maintenance/refueling outage, General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI, Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using NMP-ES-024-207 "General Visual Examination (IWE)". Per procedure NMP-ES-024-207, the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate its leak-tightness or structural integrity.
Class MC Containment Examinations (lWE)
2-6 Personnel performing the examinations were qualified in accordance with VEGP procedure 100 "Qualification and Certification of Nondestructive Examination and Personnel".
During the VEGP-2 Spring 2013 maintenance/refueling outage, General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI, Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using NMP-ES-024-207 "General Visual Examination (IWE)". Per procedure NMP-ES-024-207, the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate its leak-tightness or structural integrity.
Optical aids such as flashlights, mirrors and binoculars were used when the examinations that included both direct and remote visual examination methods. A General of 100% of the interior accessible surface areas of the containment pressure was and documented under Surveillance 84303-201 Exterior ....",t..."1''''' were not examined this refueling outage, bul will be examined laler in the Period. the examination a section of the liner plate was found to be bulging. CR 610528 was written to document the indication and INF 113V2002 was to document the condition as well. The area of the liner plale was found to be "as-is" using a previous evaluation.
2-6
More information can be obtained referencing the INF listed under Tab E. All remaining anomalies found consisted of surface rust, discolorations, arc etc. and were evaluated as not affecting the structural integrity or leak of the containment pressure boundary.
 
of the moisture barrier was and documented under Surveillance 84303-201 SNC350383 during refueling outage 2R16. No anomalies on the moisture barrier were noted. The following containment pressure boundary bolted connections were examined during 2R 16 while the connections were disassembled for work activities.
Personnel performing the examinations were qualified in accordance with VEGP procedure NMP-ES-024 100 "Qualification and Certification of Nondestructive Examination and                   Personnel". Optical aids such as flashlights, mirrors and binoculars were used when                       the examinations that included both direct and remote visual examination methods.
VT-1 or VT-3 examinations were performed to fulfill the requirements.
A General                 of 100% of the interior accessible surface areas of the containment pressure was             and documented under Surveillance 84303-201                         Exterior ....",t..."1'''''
No anomalies of the examined were identified.
were not examined this refueling outage, bul will be examined laler in the                   Period.               the examination a section of the liner plate was found to be bulging. CR 610528 was written to document the indication and INF 113V2002 was                   to document the condition as well. The               area of the liner plale was found to be               "as-is" using a previous                 evaluation. More information can be obtained       referencing the INF listed under Tab E. All remaining anomalies found consisted of surface rust,             discolorations, arc         etc. and were evaluated as not affecting the structural integrity or leak           of the containment pressure boundary.
Examinations were under work orders SNC362740, SNC363211, and SNC376511.
of the moisture barrier was                 and documented under Surveillance 84303-201 SNC350383 during refueling outage 2R16. No anomalies on the moisture barrier were noted.
Results of examinations are documented under Surveillance 84303-201-SNC350383.
The following containment pressure boundary bolted connections were examined during 2R 16 while the connections were disassembled for work activities. VT-1 or VT-3 examinations were performed to fulfill the requirements. No anomalies of the examined                             were identified. Examinations were under work orders SNC362740, SNC363211, and SNC376511. Results of examinations are documented under Surveillance 84303-201-SNC350383.
Personnel Air Lock 22101R2014 Air Lock 22101R2015 Dedicated Outage PAnAI:rl'llinn 5-M & 55-M None performed in 2R16. This 2R16 Outage was the Outage, in the Period ofthe 3(d Interval.
Personnel Air Lock                                   22101R2014 Air Lock                                     22101R2015 Dedicated Outage PAnAI:rl'llinn                     5-M & 55-M None performed in 2R16.
The results from this outage, combined with the "completed" examinations from previous refueling (2R 15, Fall 2011) and a couple of examinations scheduled for 2R 17, the 1 in the 3 rd Period of the 3 rd Interval until then in accordance with IWA-2430{d)(3) will 100% of the total Class 1 and 2 scope for the current period and interval.
This 2R16 Outage was the           Outage, in the     Period ofthe 3(d Interval. The results from this outage, combined with the "completed" examinations from           previous refueling           (2R 15, Fall 2011) and a rd couple of examinations scheduled for 2R 17, the 1               in the 3rd Period of the 3 Interval until then in accordance with IWA-2430{d)(3) will               100% of the total Class 1 and 2 scope for the current period and interval. VEGP Unit 2 is within ASME Code compliance, pending NRC approval of the volumetric and/or surface examination limitations. Requests for relief will be submitted within the time frame specified by 10 CFR 50.55a.
VEGP Unit 2 is within ASME Code compliance, pending NRC approval of the volumetric and/or surface examination limitations.
Applicable Code Cases The applicable Code Cases for the 2R16               are identified in Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan for the Third Inspection Interval under Enclosure 4. The Code Cases and limitations of use are derived from Revisions 14, 15, and 16 of NRC                     Guide 1.147.
Requests for relief will be submitted within the time frame specified by 10 CFR 50.55a. Applicable Code Cases The applicable Code Cases for the 2R16 are identified in Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan for the Third Inspection Interval under Enclosure
2-7
: 4. The Code Cases and limitations of use are derived from Revisions 14, 15, and 16 of NRC Guide 1.147. 2-7 INSERVICE INSPECTION (OWNER'S REPORT)
 
TABC INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)  
 
==SUMMARY==
* CLASS 1 AND 2 WELD EXAMINATIONS
* CLASS 1 AND 2 WELD EXAMINATIONS
* CLASS 1 AND 2 SUPPORT EXAMINATIONS 6-Summary 21201-031-3-RB 2" ELBOW TO PIPE 21201-042-3-RB R1.11H 2" ELBOW TO PIPE R-A(2) 21201-046-3-RB R1.11H 2" ELBOW TO PIPE R-A(2) 21201-051-3-RB R1.11H 2" ELBOW TO PIPE R-A(2) 21201-051-4-RB R1.20 2" PIPE TO TEE R-A(2) 21201-051-5-RB R1.20 2" TEE TO PIPE R-A(2) 21204-021-17 -RB R1.20 6" VALVE TO PIPE (AI 87-0131) 21204-021-18-RB 6" PI PE TO ELBOW 21204-021-19-RB 6" ELBOW TO PIPE (AI 87-0131) 21204-021-20-RB 6" PIPE TO ELBOW 21204-021-22-RB 6" PIPE TO ELBOW 21204-021-23-RB 6" ELBOW TO PIPE 21204*243*30-RB R1.11 1 B' VALVE TO PIPE R-A(2) 21204-243-31-RB R1.11H 1.5" PIPE TO ELBOW R-A(2) 21204*244-28*RB R1.11 1.5" VALVE TO PIPE R-A(2) 21204*244*29*RB R1.11H 1.5" PIPE TO ELBOW R-A(2) 21204-245-30-RB R1.11H 1.5" VALVE TO PIPE I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 NMP-ES-024-50 1 NMP-ES-024-501 NMP-ES-024-501 I NMP-ES-024-501 NMP-ES-024-501 NMP-ES-024-50 1 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I NMP-ES-024-501 I S13V2U015 I S13V2U016 I S13V2U017 I S13V2U018 I S13V2U019 S13V2U020 S13V2U030 S13V2U011 I
* CLASS 1 AND 2 SUPPORT EXAMINATIONS
I I S13V2U014 I S13V2U021 I S13V2U022 I S13V2U025 I S13V2U026 I S13V2U023 I Limited exam >90% coverage.
 
CC Limited exam >90% coverage.
6-                   Summary 21201-031-3-RB                 I NMP-ES-024-501 I S13V2U015  NRI 2" ELBOW TO PIPE 21201-042-3-RB                 I NMP-ES-024-501 I S13V2U016  NRI R1.11H 2" ELBOW TO PIPE R-A(2) 21201-046-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U017 R-A(2) 21201-051-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U018  NRI R-A(2) 21201-051-4-RB R1.20 2" PIPE TO TEE I NMP-ES-024-501 I S13V2U019  NRI I Limited exam  >90% coverage. CC N-460.
CC UT RI Geo. 50% Code Coverage.
R-A(2) 21201-051-5-RB                   NMP-ES-024-50 1  S13V2U020 NRI  Limited exam  >90% coverage. CC N-460.
UT RI Geo. I UTRI Geo. INA I UTRI Geo. I Examined per MRP-146 I Examined per MRP-146 3-1 
R1.20  2" TEE TO PIPE R-A(2) 21204-021-17 -RB                                                   UT RI  Geo. 50% Code Coverage.
--Vogtle 6 -Exami Summary (Total Piping) ASME Section Cat R1.11 R1.20
NMP-ES-024-501    S13V2U030  RI R1.20  6" VALVE TO PIPE (AI 87-0131) 21204-021-18-RB                   NMP-ES-024-501    S13V2U011  RI  UT RI 6" PI PE TO ELBOW Geo.
..R-A(2) 21204-245-31-RB 1.5" PIPE TO ELBOW 21204-246-32-RB 1.5" VALVE TO PIPE 21204-246-33-RB 1.5" PIPE TO ELBOW 21205-007
21204-021-19-RB                 I NMP-ES-024-501 I S13V2U029  RI I UTRI    Geo.
-72 SUPPORT H022 21205-008-35 SUPPORT HOO2 21205-027
6" ELBOW TO PIPE (AI 87-0131) 21204-021-20-RB                   NMP-ES-024-501  I S13V2U012 NRI INA 6" PIPE TO ELBOW 21204-021-22-RB 6" PIPE TO ELBOW NMP-ES-024-50 1  S13V2U013  RI I UTRI Geo.
-6 SUPPORT HOO8 21206-002-29 SUPPORT HOO8 21208-007  RB 3" VALVE TO PIPE 21208-007-2-RB 3" PIPE TO VALVE 21208-007 -G-RB 3" PIPE TO BRANCH CONNECTION 21302-107-13-RB PENETRATION TO 6" PIPE 21302-107-14-RB 6" PIPE TO VALVE 21302-107-15-RB 6" VALVE TO PIPE 21302-107-1G-RB 6" PIPE TO ELBOW 21302-109-15-RB PENETRATION TO 6' PIPE 21302-109-19-RB 6" VALVE TO PIPE 21302-109-20-RB 6" PIPE TO ELBOW n r-I v",... NMP-ES-024-501 NMP-ES-024-501 NMP-ES-024-501 NMP-ES-024-301 NMP-ES-024-301 NMP-ES-024-301 NMP-ES-024-301 NMP-ES-024-501 NMP-ES-024-501 NMP-ES-024-501 NMP-ES-024-502 NMP-ES-024-502 NMP-ES-024-502 NMP-ES-024-502 NMP-ES-024-502 NMP-ES-024-502 NMP-ES-024-502 3-2 EXamfl,ai Sheet No(s)
21204-021-23-RB                I NMP-ES-024-501 I S13V2U014  RI 6" ELBOW TO PIPE 21204*243*30-RB                 I NMP-ES-024-501 I S13V2U021  NRI R1.11 1B' VALVE TO PIPE R-A(2) 21204-243-31-RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U022  NRI R-A(2) 21204*244-28*RB R1.11 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U025  NRI I Examined per MRP-146 R-A(2) 21204*244*29*RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U026  NRI R-A(2) 21204-245-30-RB R1.11H 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U023  NRI I Examined per MRP-146 3-1
Results NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI NRI Examined per MRP-146 requi ltS. Limited exam ->90% coverage.
 
CC N-460. Examined per MRP-146 lined per MRP-146 requi lents. Limited exam >90% coverage.
Vogtle    6 - Exami          Summary (Total Piping)
CC N-460. NA Limited exam >90% coverage.
ASME                                                          EXamfl,ai Section                                          n                  Sheet      Results r-I v",...
CC N-460. Limited exam ->90% coverage.
Cat II~~!!!                                                        No(s)
CC N-460. 50% Code Cov.erage Relief Request 50% Code NA NA NA NA NA NA NA NA Vogtle 2R16 -nation Summary Pipi Examination Results Remarks No(s 21302-109-21-RB NMP-ES-024-502 I S13V2U004 NRI NA 6" ELBOW TO PIPE '--_-'--_____L. 3-3 6 -Examination Summary (Total Equipmert<l.
  ~ti~)            21204-245-31-RB                                                            Examined per MRP-146 requi      ltS.
ASME Section mathn Procedure{s)
NMP-ES-024-501 S13V2U024              NRI 1.5" PIPE TO ELBOW                                                          Limited exam - >90% coverage. CC N-460.
Cat litem No(s) N-122 21201-BS-001-110-VT NMP-ES-024-202 S13V2V108 Sat NA 20 CHANNEL HEAD DRAIN TUBE B-D 21201-BS-001-IR-01 NMP-ES-024-513 S13V2U033 NRI NA B3.140 INLET NOZZLE INNER RADIUS B-D 21201-B6-001*IR-02 NMP-ES-024-513 S13V2U034 NRI NA B3.140 OUTLET NOZZLE INNER RADIUS N-122 21201-B6-002-110-VT NMP-ES-024-202 S13V2V109 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE N-122 21201-BS-003-110-VT NMP-ES-024-202 S13V2V110 Sat NACHANNEL HEAD DRAIN TUBE -21201-BS-004-110-VT NMP-ES-024-202 S13V2V111 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE I-P6-002-B33 B48Performed QC PtJl::iOIIIi per 2" DIAMETER SEAL WATER HOUSING NMP-ES-024-201 NA SatWork Order SNC456322.
  ~;~(~)            21204-246-32-RB 1.5" VALVE TO PIPE NMP-ES-024-501 S13V2U027              NRI Examined per MRP-146 R-A(2)            21204-246-33-RB                                                                  lined per MRP-146 requi  lents.
BOLTS -21201-V6-001-BMI-BMV N-722 RPV BOTTOM HEAD INSTRUMENTATION NMP-ES-024-208 S13V2V052 Sat NA B15.80 BMV -
NMP-ES-024-501 S13V2U028              NRI R1.11H            1.5" PIPE TO ELBOW                                                          Limited exam >90% coverage. CC N-460.
NMP-ES-024-208 S13V2V163 Sat NA B4.10 VESSEL CLOSURE HEAD EXTERIOR -Reference Jhouse Report 21 ,v*CRDM VENDOR VENDOR Sat . Limitations allCRDM NOZZLE qreater than 98% coveraQe.
C-C              21205-007 -72                    NMP-ES-024-301  S13V2POO2              NRI NA C3.20            SUPPORT H022
B-N-1 21201-VS-001-101 NMP-ES-024-203 S13V2V186 Sat NAVESSEL INTERIOR 21201-VS-001-102 B-N-1 VESSEL CLOSURE HEAD INTERIOR (FSAR NMP-ES-024-203 S13V2V088 Sat NA B13.CH 5.3.3.7l N-122 21201*VS*001*W33*BMV NMP-ES-024-202 S13V2V145 Sat NA B15.90 OUTLET NOZZLE N1 SAFE END BMV N*722 21201-VS-001-W3S-BMV NMP-ES-024-202 S13V2V146 Sat NA B15.90 OUTLET NOZZLE N4 SAFE END BMV N-722 21201-V6-001-W37 -BMV NMP-ES-024-202 S13V2V147 Sat NA B15.90 OUTLET NOZZLE N5 SAFE END BMV N-122 21201-V6-001-W40-BMV NMP-ES-024-202 S13V2V148 Sat NAOUTLET NOZZLE N8 SAFE END BMV 3-4 Vogtle 2R16 -Examination Summary (Total Supports)
:-C              21205-008-35                    NMP-ES-024-301  S13V2P003              NRI Limited exam   >90% coverage. CC N-460.
ASME Section XI Examination/Area Cat /Item F-A 21201-012-H604 F1.10H(2)
C3.20            SUPPORT HOO2 C-C              21205-027 -6                    NMP-ES-024-301  S13V2POO1              NRI Limited exam - >90% coverage. CC N-460.
VAR SPRING F-A 21201-030-H602 F1.10G(2)
C3.20            SUPPORT HOO8 C-C              21206-002-29                    NMP-ES-024-301  S13V2POO4              NRI NA C3.20            SUPPORT HOO8
STRUT F-A 21201-030-H606 F1.10G(2)
  ~ti~)             21208-007 RB 3" VALVE TO PIPE NMP-ES-024-501  S13V2U009              NRI 50% Code Cov.erage ..
STRUT F-A 21201-030-H630 F1.10F(2)
Relief Request required.
RESTRAINT F-A 21201-049-H024 F1.10G(2)
  ~ti~)            21208-007-2-RB                                                             50% Code Coverage.
STRUT F-A 21201-P6-004-SP01 F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP02 F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP03 F1.40(2) PUMP SUPPORT F-A 21201-P6-004-T01 F1.40(2) RESTRAINT F-A 21201-P6-004-T02 F1 .40(2) RESTRAINT F-A 21201-P6-004-T03 F1.40(2) RESTRAINT F-A 21201-V6-001-RS1 F1.40(2) VESSEL SUPPORT F-A 21201-V6-001-RS2 F1.40(2) VESSEL SUPPORT F-A 21201-V6-001-RS3 F1.40(2) VESSEL SUPPORT F-A 21201-V6-001-RS4 F1.40(2) VESSEL SUPPORT NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 N MP-ES-024-203 NMP-ES-024-203 3-5 Exam/Cal Sheet No(s). S13V2V171 S13V2V183 S13V2V187 S13V2V112 S13V2V161 S13V2V114 S13V2V115 S13V2V116 S13V2V117 S13V2V113 S13V2V188 S13V2V141 S13V2V142 S13V2V143 S13V2V144 Results Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Remarks NA NA NA NA NA NA NA NA NA NA NA Limitations. Approximately 25% coverage. Per IWF-1230, examined accessible portions.
NMP-ES-024-501  S13V2U010              NRI 3" PIPE TO VALVE                                                            Relief~equest required.
Relief not req'd . Limitations. Approximately 25% coverage. Per IWF-1230, examined accessible portions.
f---------
Relief not req 'd. Limitations.
~--A(2)              21208-007 -G-RB                 NMP-ES-024-501  S13V2U031              NRI NA R1.11            3" PIPE TO BRANCH CONNECTION
Approximately 25% coverage. Per IWF-1230, examined accessible portions.
  ~tJ~)            21302-107-13-RB PENETRATION TO 6" PIPE NMP-ES-024-502  S13V2U005              NRI NA
Relief not req 'd. Limitations.
  ~tJ~)            21302-107-14-RB 6" PIPE TO VALVE NMP-ES-024-502  S13V2UOO6              NRI NA R-A(2)            21302-107-15-RB                 NMP-ES-024-502  S13V2U007              NRI NA R1.20            6" VALVE TO PIPE R-A(2)            21302-107-1G-RB NMP-ES-024-502  S13V2UOO8              NRI NA
Approximately 25% coverage. Per IWF-1230, examined accessible portions.
~:20                6" PIPE TO ELBOW 21302-109-15-RB                  NMP-ES-024-502  S13V2UOO1              NRI NA R1.20            PENETRATION TO 6' PIPE
Relief not req'd.
  ~tJ~)      ..
Vogtle 2R16 -Examination Summary (Total Supports)
21302-109-19-RB
ASME eo> .4-: ,n... litem F-A F1.20G(2)
_  6" VALVE TO PIPE NMP-ES-024-502  S13V2U002              NRI NA R-A(2)            21302-109-20-RB NMP-ES-024-502  S13V2UOO3              NRI NA
F1.20F(2)
~O                  6" PIPE TO ELBOW 3-2
F-A F1.20G(2)
 
F-A F1.20F(2)
Vogtle 2R16 -       nation Summary          Pipi Examination Results    Remarks No(s 21302-109-21-RB                NMP-ES-024-502 I S13V2U004  NRI    NA
F-A F1.20F(2)
' - - _ - ' - -_ _ _ _ _L. 6" ELBOW TO PIPE 3-3
F-A F1.20F(2)
 
F-A F1.20F(2)
6 - Examination Summary (Total Equipmert<l.
F-A F1.20F(2)
ASME                                                        Exam/Cal Section                  mathn                                  Sheet Procedure{s)
F-A F1.20G(2)
Cat litem                                                        No(s)
F-A F1.20G(2)
N-122      21201-BS-001-110-VT                  NMP-ES-024-202  S13V2V108 Sat  NA 20  CHANNEL HEAD DRAIN TUBE B-D        21201-BS-001-IR-01                  NMP-ES-024-513  S13V2U033 NRI  NA B3.140    INLET NOZZLE INNER RADIUS B-D        21201-B6-001*IR-02                  NMP-ES-024-513  S13V2U034 NRI  NA B3.140    OUTLET NOZZLE INNER RADIUS N-122      21201-B6-002-110-VT                  NMP-ES-024-202  S13V2V109 Sat  NA B15.120    CHANNEL HEAD DRAIN TUBE N-122      21201-BS-003-110-VT                  NMP-ES-024-202  S13V2V110 Sat  NA B15.120    CHANNEL HEAD DRAIN TUBE N-722      21201-BS-004-110-VT                  NMP-ES-024-202  S13V2V111 Sat NA B15.120    CHANNEL HEAD DRAIN TUBE B-G-2            I-P6-002-B33  B48                                            Performed          QC PtJl::iOIIIi per 2" DIAMETER SEAL WATER HOUSING      NMP-ES-024-201  NA       Sat B7.60      BOLTS                                                              Work Order SNC456322.
F-A F1.20F(2)
N-722      21201-V6-001-BMI-BMV RPV BOTTOM HEAD INSTRUMENTATION      NMP-ES-024-208  S13V2V052 Sat  NA B15.80    BMV N-129      21201-V6.001-C~DI\JI@~.'Q            NMP-ES-024-208  S13V2V163 Sat NA B4.10 BMV  VESSEL CLOSURE HEAD EXTERIOR Reference Westi Jhouse Report WDI N-729      21        ,v*CRDM                    VENDOR          VENDOR    Sat  PJF-1                . Limitations all B4.20      CRDM NOZZLE qreater than 98% coveraQe.
F*A F1.20F(2)
B-N-1      21201-VS-001-101                    NMP-ES-024-203  S13V2V186 Sat NA B13.10    VESSEL INTERIOR B-N-1      21201-VS-001-102 VESSEL CLOSURE HEAD INTERIOR (FSAR  NMP-ES-024-203  S13V2V088 Sat  NA B13.CH    5.3.3.7l N-122      21201*VS*001*W33*BMV                 NMP-ES-024-202  S13V2V145 Sat NA B15.90    OUTLET NOZZLE N1 SAFE END BMV N*722      21201-VS-001-W3S-BMV                NMP-ES-024-202  S13V2V146 Sat NA B15.90    OUTLET NOZZLE N4 SAFE END BMV N-722      21201-V6-001-W37 -BMV                NMP-ES-024-202  S13V2V147 Sat NA B15.90    OUTLET NOZZLE N5 SAFE END BMV N-122      21201-V6-001-W40-BMV                NMP-ES-024-202  S13V2V148 Sat NA B15.90    OUTLET NOZZLE N8 SAFE END BMV 3-4
F-A F1.20F(2)
 
F-A F1.20F(2)
Vogtle 2R16 - Examination Summary (Total Supports)
F1.20F(2)
ASME                                                      Exam/Cal Examination Section XI            Examination/Area                          Sheet  Results                Remarks Procedure(s)
F*A F1.20G(2)
Cat /Item                                                    No(s).
F-A F1.20G(2)
F-A        21201-012-H604                    NMP-ES-024-203 S13V2V171  Sat   NA F1.10H(2)  VAR SPRING F-A        21201-030-H602                    NMP-ES-024-203  S13V2V183  Sat   NA F1.10G(2)  STRUT F-A        21201-030-H606                    NMP-ES-024-203  S13V2V187  Sat   NA F1.10G(2)  STRUT F-A        21201-030-H630                    NMP-ES-024-203  S13V2V112  Sat   NA F1.10F(2)  RESTRAINT F-A        21201-049-H024                    NMP-ES-024-203  S13V2V161  Sat   NA F1.10G(2)   STRUT F-A         21201-P6-004-SP01                NMP-ES-024-203  S13V2V114  Sat  NA F1.40(2)   PUMP SUPPORT F-A         21201-P6-004-SP02                NMP-ES-024-203  S13V2V115  Sat  NA F1.40(2)   PUMP SUPPORT F-A         21201-P6-004-SP03                NMP-ES-024-203  S13V2V116  Sat  NA F1.40(2)   PUMP SUPPORT F-A         21201-P6-004-T01                  NMP-ES-024-203  S13V2V117  Sat  NA F1.40(2)   RESTRAINT F-A         21201-P6-004-T02                  NMP-ES-024-203  S13V2V113  Sat  NA F1 .40(2)   RESTRAINT F-A         21201-P6-004-T03                  NMP-ES-024-203  S13V2V188  Sat  NA F1.40(2)   RESTRAINT Limitations . Approximately 25%
Examinationl Area 21202-001-H018 STRUT 21202-140-HOO3 RESTRAINT 21202-141-H011 STRUT 21202-216-H014 RESTRAINT 21202-216-H019 RESTRAINT 21202-216-H020 RESTRAINT 21202*216-H021 RESTRAINT 21202-220-HOO3 RESTRAINT 21202-220-HOO5 STRUT 21202-220-HOO6 STRUT 21202-220*H011 RESTRAINT 21202-220-H015 RESTRAINT 21202*220*H017 RESTRAINT 21202-220-H023 RESTRAINT 21202-220-H025 RESTRAINT/LUGS 21202-220-H028 STRUT 21202-220-H029 STRUT I ___=UI NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 N MP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 N MP-ES-024-203 NMP-ES-024-203 NMP-ES-024-203 II ........No(s). S13V2V101 S13V2V032 S13V2V033 S13V2V055 S13V2V095 S13V2V096 S13V2V056 S13V2V079 S13V2V068 S13V2V069 S13V2V070 S13V2V071 S13V2V072 S13V2V073 S13V2V074 S13V2V103 S13V2V102 Results Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Remarks Vogtle 2R16 -Examination Summary (Total Supports)
F-A         21201-V6-001-RS1                  NMP-ES-024-203  S13V2V141  Sat  coverage. Per IWF-1230, examined F1.40(2)   VESSEL SUPPORT accessible portions. Relief not req'd .
ASME Section XI Exam i nation/Area Cat litem 21202-229-H012 F1.20F(2)
Limitations. Approximately 25%
RESTRAINT F-A 21202-229-H021 F1.20F(2)
F-A         21201-V6-001-RS2                  NMP-ES-024-203  S13V2V142  Sat  coverage. Per IWF-1230, examined F1.40(2)   VESSEL SUPPORT accessible portions. Relief not req 'd.
RESTRAINT 21204-011-HOO5 F1.20F(2)
Limitations. Approximately 25%
RESTRAINT F-A 21204-012-HOO1 F1.20F(2)
F-A         21201-V6-001-RS3                  N MP-ES-024-203 S13V2V143  Sat  coverage. Per IWF-1230, examined F1.40(2)   VESSEL SUPPORT accessible portions. Relief not req 'd.
RESTRAINT 21204-021-HOO2 F1.10G(2)
Limitations. Approximately 25%
STRUT F-A 21204-021-HOO4 F1.10F(2)
F-A         21201-V6-001-RS4                  NMP-ES-024-203  S13V2V144  Sat  coverage. Per IWF-1230, examined F1.40(2)   VESSEL SUPPORT accessible portions. Relief not req 'd.
RESTRAINT 21204-021-HOO8 F1.10G(2)
3-5
STRUT F-A 21204-021-H 009 F1.10F(2)
 
RESTRAINT 21204-021-H011 F1.10G(2)
Vogtle 2R16 - Examination Summary (Total Supports)
STRUT F-A 21204-021-H012 F1.10G(2)
ASME                                                                        II eo>  .4-: ...
STRUT 21204-021-H014 F1.10G(2)
          ,n ExaminationlArea        I ___ =UI      -,._-
STRUT F-A 21204-021-H015 F1.10G(2)
                                                                  ~ ........"'+    Results    Remarks litem                                                    No(s).
STRUT 21204-021-H016 F1.10F(2)
F-A            21202-001-H018                  NMP-ES-024-203 S13V2V101            Sat  NA F1.20G(2)      STRUT 21202-140-HOO3                  NMP-ES-024-203 S13V2V032            Sat  NA F1.20F(2)      RESTRAINT F-A            21202-141-H011                  NMP-ES-024-203 S13V2V033            Sat  NA F1.20G(2)      STRUT F-A            21202-216-H014                  NMP-ES-024-203 S13V2V055            Sat  NA F1.20F(2)      RESTRAINT F-A            21202-216-H019                  NMP-ES-024-203 S13V2V095            Sat  NA F1.20F(2)      RESTRAINT F-A            21202-216-H020 N MP-ES-024-203 S13V2V096            Sat  NA F1.20F(2)      RESTRAINT F-A            21202*216-H021                  NMP-ES-024-203 S13V2V056            Sat  NA F1.20F(2)     RESTRAINT F-A            21202-220-HOO3                  NMP-ES-024-203  S13V2V079            Sat  NA F1.20F(2)      RESTRAINT F-A            21202-220-HOO5                  NMP-ES-024-203  S13V2V068            Sat   NA F1.20G(2)      STRUT F-A            21202-220-HOO6                  NMP-ES-024-203  S13V2V069            Sat  NA F1.20G(2)      STRUT F-A            21202-220*H011                  NMP-ES-024-203  S13V2V070            Sat  NA F1.20F(2)      RESTRAINT F*A            21202-220-H015                  NMP-ES-024-203  S13V2V071            Sat  NA F1.20F(2)      RESTRAINT F-A            21202*220*H017                  NMP-ES-024-203  S13V2V072            Sat  NA F1.20F(2)     RESTRAINT F-A           21202-220-H023                  NMP-ES-024-203  S13V2V073            Sat  NA F1.20F(2)     RESTRAINT 21202-220-H025                  N MP-ES-024-203 S13V2V074            Sat  NA F1.20F(2)     RESTRAINT/LUGS F*A            21202-220-H028                  NMP-ES-024-203  S13V2V103            Sat  NA F1.20G(2)     STRUT F-A           21202-220-H029 NMP-ES-024-203  S13V2V102            Sat  NA F1.20G(2)     STRUT 3-6
RESTRAINT F-A 21204-039-HOO1 F1.20A(2)
 
ANCHOR 21204-063-HOO1 F1.20F(2)
Vogtle 2R16 - Examination Summary (Total Supports)
RESTRAINT F-A 21204-076-H010 F1.JOC;(2)
ASME                                                      Exam/Cal Examination Section XI            Exam i nation/Area                      Sheet  Results    Remarks Procedure(s)
STRUT NMP-ES-024-203 3-7 Exam/Cal Sheet No(s). S13V2V097 S13V2V107 S13V2V022 S13V2VOO3 S13V2V162 S13V2V129 S13V2V130 S13V2V131 S13V2V164 S13V2V132 S13V2V133 S13V2V134 S13V2V135 S13V2V177 S13V2V034 S13V2V122 S13V2V123 Results Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Remarks NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Vogtle 2R16 -Examination Summary (Total Supports)
Cat litem                                                    No(s).
ASME Section XI Examination/Area Cat litem F-A 21204-076-H014 F1.10F(2)
F-A         21202-229-H012                    NMP-ES-024-203 S13V2V097  Sat  NA F1.20F(2)   RESTRAINT F-A         21202-229-H021 NMP-ES-024-203 S13V2V107  Sat  NA F1.20F(2)   RESTRAINT F-A         21204-011-HOO5                    NMP-ES-024-203 S13V2V022  Sat  NA F1.20F(2)   RESTRAINT F-A         21204-012-HOO1                    NMP-ES-024-203 S13V2VOO3  Sat  NA F1.20F(2)   RESTRAINT F-A         21204-021-HOO2                    NMP-ES-024-203 S13V2V162  Sat  NA F1.10G(2)   STRUT F-A        21204-021-HOO4 NMP-ES-024-203 S13V2V129  Sat  NA F1.10F(2)   RESTRAINT F-A         21204-021-HOO8 NMP-ES-024-203 S13V2V130  Sat  NA F1.10G(2)   STRUT F-A         21204-021-H 009                  NMP-ES-024-203 S13V2V131  Sat  NA F1.10F(2)   RESTRAINT F-A        21204-021-H011                    NMP-ES-024-203 S13V2V164  Sat  NA F1.10G(2)  STRUT F-A        21204-021-H012                    NMP-ES-024-203 S13V2V132  Sat  NA F1.10G(2)  STRUT F-A        21204-021-H014                    NMP-ES-024-203 S13V2V133  Sat  NA F1.10G(2)  STRUT F-A        21204-021-H015                   NMP-ES-024-203 S13V2V134  Sat  NA F1.10G(2)  STRUT F-A        21204-021-H016                    NMP-ES-024-203 S13V2V135  Sat  NA F1.10F(2)  RESTRAINT F-A        21204-039-HOO1 NMP-ES-024-203 S13V2V177  Sat  NA F1.20A(2)  ANCHOR F-A        21204-063-HOO1 NMP-ES-024-203 S13V2V034  Sat  NA F1.20F(2)  RESTRAINT F-A        21204-076-H010                    NMP-ES-024-203 S13V2V122  Sat  NA F1.JOC;(2)  STRUT F-A        21204-076*H011                    NMP-ES-024-203 S13V2V123  Sat  NA E~*1Qft~L  RESTRAINT 3-7
RESTRAINT F-A 21204-076-H015 F1.10F(2)
 
RESTRAINT F-A 21204-076-H017 F1.10F(2)
Vogtle 2R16 - Examination Summary (Total Supports)
RESTRAINT F-A 21204-076-H019 F1.10F(2)
ASME                                                      Exam/Cal Examination Section XI            Examination/Area                        Sheet  Results    Remarks Procedure(s)
RESTRAINT F-A 21204-076-H021 F1.10F(2)
Cat litem                                                      No(s}.
RESTRAINT F-A 21204-076-H023 F1.10G(2)
F-A        21204-076-H014                    NMP-ES-024-203 S13V2V124  Sat  NA F1.10F(2)  RESTRAINT F-A        21204-076-H015                    NMP-ES-024-203 S13V2V125  Sat  NA F1.10F(2)  RESTRAINT F-A        21204-076-H017                    NMP-ES-024-203 S13V2V126  Sat  NA F1.10F(2)  RESTRAINT F-A        21204-076-H019                    NMP-ES-024-203 S13V2V127  Sat  NA F1.10F(2)   RESTRAINT F-A        21204-076-H021                    NMP-ES-024-203 S13V2V128  Sat   NA F1.10F(2)   RESTRAINT F-A        21204-076-H023 NMP-ES-024-203 S13V2V175  Sat  NA F1.10G(2)   STRUT F-A         21204-121-HOO1                    NMP-ES-024-203 S13V2V084  Sat  NA F1.20F(2)   RESTRAINT F-A         21204-P6-004-S01                  NMP-ES-024-203 S13V2VOO4  Sat  NA F1.40(2J    PUMP SUPPORT F-A         21205-003-H010                    NMP-ES-024-203 S13V2V160  Sat  NA F1.20F(2)   RESTRAINT/LUGS F-A         2120S-004-H019                    NMP-ES-024-203 S13V2V011  Sat  NA F1.20F(2)   RESTRAINT F-A        2120S-006-HOO9                    NMP-ES-024-203 S13V2V012  Sat  NA F1.20G(2)   STRUT F-A         21205-007 -H022                  NMP-ES-024-203 S13V2V013  Sat  NA F1.20F(2)   RESTRAINT F-A        21205-007-H02S                    NMP-ES-024-203 S13V2V014  Sat  NA F1.20G(2)   STRUT F-A         21205-008-H023                    NMP-ES-024-203 S13V2V017  Sat  NA F1.20F(2)   RESTRAINT F-A        21205-008-H039                    NMP-ES-024-203 S13V2V015  Sat  NA F1.20H(2)   VARSPRING F-A         21205-027 -H008                  NMP-ES-024-203 S13V2V050  Sat  NA F1.20F(2)   RESTRAINT F-A         21205-E6-002-S01                  NMP-ES-024-203 S13V2V016  Sat  NA F1.40(2)    SUPPORT SKIRT 3-8
STRUT F-A 21204-121-HOO1 F1.20F(2)
 
RESTRAINT F-A 21204-P6-004-S01 F1.40(2J PUMP SUPPORT F-A 21205-003-H010 F1.20F(2)
Vogtle 2R16 - Examination Summary (Total Supports)
RESTRAINT/LUGS F-A 2120S-004-H019 F1.20F(2)
ASME                                                              Exam/Cel!
RESTRAINT F-A 2120S-006-HOO9 F1.20G(2)
Section XI                          ._ .. _...
STRUT F-A 21205-007 -H022 F1.20F(2)
                                          ,~tinnl Examination Sheet   .,--~  ..
RESTRAINT F-A 21205-007-H02S F1.20G(2)
                                                                                    ~AC:llltc:    Remarks Cat litem                                                              No(s).
STRUT F-A 21205-008-H023 F1.20F(2)
F-A                  21206-001-H007                    NMP-ES-024-203 S13V2V157    Sat     NA F1.20H(2)             VAR SPRING F*A                  21206-002-H022                    NMP-ES-024-203 S13V2V049    Sat    NA F1.20F(2)             RESTRAINT F-A                   21206-004*H006                    NMP-ES-024-203 S13V2V053    Sat    NA F1.20F(2)             RESTRAINT F-A                   21206*008*H096                    NMP-ES-024-203 S13V2V078    Sat    NA F1.20G(2)             STRUT F-A                   21208-007 -H001                  NMP-ES-024-203 S13V2V165    Sat    NA F1.10F(2)             RESTRAINT F-A                   21208-099-H603                    NMP-ES-024-203 S13V2V051    Sat    NA
RESTRAINT F-A 21205-008-H039 F1.20H(2)
  ~1 IF(2)             RESTRAINT 21208*137*HOO1                    NMP-ES-024-203 S13V2V028    Sat    NA F1.20F(2)             RESTRAINT F-A                   21208*139-HOO4                    NMP-ES-024-203 S13V2V026    Sat    NA F1.20F(2)             RESTRAINT F-A                   21208*139*HOO9                    NMP-ES-024-203 S13V2V027    Sat    NA F1 RESTRAINT 2120S-145-HOO6                    NMP-ES-024-203 S13V2V023    Sat    NA F1.20F(2)             RESTRAINT F-A                   21208-411-H010                    NMP-ES-024-203 S13V2V024    Sat    NA F1.20U(2)             UNDERSUPPORT F*A                  21208-411*H016                    NMP-ES-024-203 S13V2V025    Sat    NA F1.20U(2)             UNDERSUPPORT F-A                   21208*P6*003*S01                  NMP-ES-024-203 S13V2VOO7    Sat    NA F1.40(2)             SUPPORT BASE F-A                   21301*016-HOO3                    NMP-ES-024*203 S13V2V151    Sat    NA If1:20G(2)               STRUT 21302*033-HOO2                    NMP-ES-024-203 S13V2V174            NA Sat F1"20A121 f-CCC"""  LeL """""""""
VARSPRING F-A 21205-027 -H008 F1.20F(2)
ANCHORW/ATI 21302-086-HOO5                    NMP-ES-024-203 S13V2V140            NA Sat F1.20A(2)             ANCHOR 3-9
RESTRAINT F-A 21205-E6-002-S01 F1.40(2) SUPPORT SKIRT NMP-ES-024-203 3-8 Exam/Cal Sheet No(s}. S13V2V124 S13V2V125 S13V2V126 S13V2V127 S13V2V128 S13V2V175 S13V2V084 S13V2VOO4 S13V2V160 S13V2V011 S13V2V012 S13V2V013 S13V2V014 S13V2V017 S13V2V015 S13V2V050 S13V2V016 Results Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Remarks NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Vogtle 2R16 -Examination Summary (Total Supports) Section Cat IF(2)""""" If1:20G(2)
 
F1"20A121 f-CCC""" LeL """"""""" F1.20A(2)
Vogtle 2R16-           Summary          pports)
._.._... Examination 21206-001-H007 VAR SPRING NMP-ES-024-203 21206-002-H022 RESTRAINT NMP-ES-024-203 21206-004*H006 RESTRAINT NMP-ES-024-203 21206*008*H096 STRUT NMP-ES-024-203 21208-007 -H001 RESTRAINT NMP-ES-024-203 21208-099-H603 RESTRAINT NMP-ES-024-203 21208*137*HOO1 RESTRAINT NMP-ES-024-203 21208*139-HOO4 RESTRAINT NMP-ES-024-203 21208*139*HOO9 RESTRAINT NMP-ES-024-203 2120S-145-HOO6 RESTRAINT NMP-ES-024-203 21208-411-H010 UNDERSUPPORT NMP-ES-024-203 21208-411*H016 UNDERSUPPORT NMP-ES-024-203 21208*P6*003*S01 SUPPORT BASE NMP-ES-024-203 21301*016-HOO3 STRUT NMP-ES-024*203 21302*033-HOO2 ANCHORW/ATI NMP-ES-024-203 21302-086-HOO5 ANCHOR NMP-ES-024-203 Exam/Cel!
ASME                                                          Exam/Cal
Sheet No(s). S13V2V157 S13V2V049 S13V2V053 S13V2V078 S13V2V165 S13V2V051 S13V2V028 S13V2V026 S13V2V027 S13V2V023 S13V2V024 S13V2V025 S13V2VOO7 S13V2V151 S13V2V174 S13V2V140
        .40: .... XI                              Examination e                            Examination/Area                  Sheet  Results               Rema.
..Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Sat Remarks NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 3-9 Vogtle 2R16-Summary pports) ASME .40: .... XI Cat litem Examination/Area Examination Procedure(s)
Procedure(s)
Exam/Cal Sheet No(s). Results Rema. Loose "jam nut". 't" lhlp "as-is" F-A F1 21302-107-H004 RESTRAINT NMP-ES-024-203 S13V2V176 Unsat I Sat per Ref INF 113V2001.
Cat litem                                                        No(s).
Corrected per MWO SNC475383 and re-examined.
Loose "jam nut".    't" lhlp "as-is" F-A                  21302-107-H004                                        Unsat I per      Ref INF 113V2001.
-F-A F1.20F(2J 21302-107 -H009 RESTRAINT NMP-ES-024-203 S13V2V170 Sat NA F*A F1.20F(2) 21302*109*H004 RESTRAINT NMP-ES-024-203 S13V2V149 Sat NA F1.20F(2) 21501*027*HOO3 RESTRAINT NMP-ES-024-203 S13V2V185 Sat NA F*A F1.20U(2) 21501*028*H001 UNDERSUPPORT NMP-ES-024-203 S13V2V180 Sat NA F-A F1.20F(2) 21501-028-H005 RESTRAINT NMP-ES-024-203 S13V2V166 Sat NA F*A F1.20F(2) 21501-038*HOO2 RESTRAINT NMP-ES-024-203 S13V2V100 Sat NA F*A F1.20F(2) 21501-038*H003 RESTRAINT NMP-ES-024-203 S13V2V099 Sat NA F-A c&#xa3;L.. 1(2) 21501-038-H004 UNDERSUPPORT NMP-ES-024-203 S13V2V098 Sat NA 3*10 INSERVICE INSPECTION (OWNER'S REPORT)
NMP-ES-024-203 S13V2V176 F1                   RESTRAINT                                              Sat    Corrected per MWO SNC475383 and re-examined.
* SYSTEM PRESSURE TESTS The following system pressure tests on Class 1 and Class 2 after the last refueling outage (2R 15) through the completion of the sixteenth The system pressure tests indicated below include system tests for: .. Class 1 components (IWB-2500-1, Examination B-P), .. Class 2 components (IWC-2500-1, Examination C-H) not during normal plant operation which are identified as 84003-203 84003-221, .. Class 2 components (IWC-2500-1, Examination category to normal operation which are Identified as 84003-2AR through 84003-2CS.
F-A                  21302-107 -H009              NMP-ES-024-203 S13V2V170  Sat    NA F1.20F(2J            RESTRAINT F*A                  21302*109*H004              NMP-ES-024-203 S13V2V149  Sat    NA F1.20F(2)
Boundaries for the system pressure tests are described in the Pressure Test Plan Plan-Volume 3). Examination results are discussed in the sections of document.
~~~~~~~~.
The examination data for these system pressure tests is available at the site for review upon Test Description 14910-201 B-P I 84003-203 C-H/C7.10 to 84003-206 C-H I C7.10 Penetration 33 (Safety Injection to 84003-207 C-H I C7.10 Penetration 31 (Safety Injection to 84003-209 C-H/C7.10 Penetration 56 (Residual Heat Removal Hot Leaka e 84003-210 C-H/C7.10 e 84003-211 C-H/C7.10 Residual Heat Removal System to Chemical and Volume S stem Suction S stem Leaka e 84003-214 C-H/C7.10 Turbine Driven Auxiliary Feedwater Pump Leakage 84003-218 C-H/C7.10 Residual Heat Removal Train "An Suction Piping Tank System Leakage 84003-219 C-H/C7.10 Residual Heat Removal Train "B" Suction Piping Tank S stem Leaka e 84003-220 C-H I C7.i0 84003-221 C-H/C7.10 Tank 84003-2AR C-H I C7.10 84003-2AS C-H I 84003-2CI C-H I 84003-2CJ C-H I C7.10 1302-P4-003 84003-2CS C-H I C7.i0 4-1 IN RVIC INSPECTION (OWNER'S REPORT)
RESTRAINT 21501*027*HOO3              NMP-ES-024-203 S13V2V185  Sat    NA F1.20F(2)            RESTRAINT F*A                  21501*028*H001                                                NA NMP-ES-024-203 S13V2V180  Sat F1.20U(2)            UNDERSUPPORT F-A                  21501-028-H005              NMP-ES-024-203 S13V2V166  Sat    NA F1.20F(2)            RESTRAINT F*A                  21501-038*HOO2              NMP-ES-024-203             Sat    NA S13V2V100 F1.20F(2)            RESTRAINT F*A                  21501-038*H003              NMP-ES-024-203 S13V2V099  Sat    NA F1.20F(2)            RESTRAINT F-A                  21501-038-H004              NMP-ES-024-203 S13V2V098  Sat    NA c&#xa3;L.. 1(2)              UNDERSUPPORT 3*10
 
TABD INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)
 
==SUMMARY==
* SYSTEM PRESSURE TESTS
 
The following system pressure tests on Class 1 and Class 2                        nAI'Tnr'm~'r1 after the last refueling outage (2R 15) through the completion of the sixteenth                              The system pressure tests indicated below include system          tests for:
.. Class 1 components (IWB-2500-1, Examination                  B-P),
.. Class 2 components (IWC-2500-1, Examination                C-H) not                          during normal plant operation which are identified as 84003-203           84003-221,
.. Class 2 components (IWC-2500-1, Examination category                      to                    normal operation which are Identified as 84003-2AR through 84003-2CS.
Boundaries for the system pressure tests are described in the Pressure Test Plan Plan-Volume 3). Examination results are discussed in the              sections of                document.
The examination data for these system pressure tests is available at the        site for review upon Test Description 14910-201        B-P I B15.10 84003-203        C-H/C7.10                                                      to Cold 84003-206        C-H I C7.10    Penetration 33 (Safety Injection to Hot Test 84003-207        C-H I C7.10    Penetration 31 (Safety Injection to Hot Test 84003-209        C-H/C7.10      Penetration 56 (Residual Heat Removal Hot Leaka e Test 84003-210        C-H/C7.10                                                          e Test 84003-211        C-H/C7.10      Residual Heat Removal System to Chemical and Volume Control S stem Suction S stem Leaka e Test 84003-214        C-H/C7.10      Turbine Driven Auxiliary Feedwater Pump 1302-P4-001 Leakage Test 84003-218        C-H/C7.10      Residual Heat Removal Train "An Suction Piping in Tank System Leakage Test 84003-219        C-H/C7.10      Residual Heat Removal Train "B" Suction Piping in Tank S stem Leaka e Test 84003-220        C-H I C7.i0                                                                          Tank 84003-221        C-H/C7.10                                                                            Tank 84003-2AR        C-H I C7.10                                                                      Test 84003-2AS        C-H I C7.10 84003-2CI        C-H I C7.10 84003-2CJ        C-H I C7.10                                                                  1302-P4-003 84003-2CS        C-H I C7.i0 4-1
 
lABE IN RVIC INSPECTION EXAMINATION (OWNER'S REPORT)  
 
==SUMMARY==
* REPORTABLE INDICATION  
* REPORTABLE INDICATION  


Line 219: Line 306:


==SUMMARY==
==SUMMARY==
The following Indication Notifications Forms and/or Condition were issued due to -..<>,,,,,,.-tQ indications or conditions being observed during the examination of either Class 1 or 2 components during 6 th the sixteenth ) maintenance/refueling at VEGP-2 (referenced attachments are available at the VEGP for review upon request. as volumetric, surface or visual examinations with indications/conditions exceeding standard of ASME XI, thus "analytical evaluation".
Volumetric and surface examinations meeting the applicable
",,..r*<>,..,lt!:l are not considered "reportable", and will not be indicated on the table below. Visual indications will be included in the table, even if dispositioned as "acceptable".
Generation of an "Indication Notification Report" and lor "Condition Report" as specified in the below table does not indicate a Code "Reportable" condition.
INF NO. and/or Affected Component/Area INF Condition R 113V2001 Support 21302-107 -H004 Condition CR 611390 (IWF) Not per disposition.
Condition corrected per MWO SNC475383.
113V2002 Containment Liner Plale / CR 610528 Level 1 of CNMT near An area of the liner plate was found to have some Personnel sections on the 220' elevation (Level 1). The area in question is about 7 ft in width and 1 ft in The area is about 7 fI above the floor and butts up the thickened penetration for the Personnel Hatch. The area in question was broken up into eight (8) one foot square grids and the lowest thickness was found in each grid. The lowest ultrasonic thickness measurement found was 0.213 in and nominal liner thickness in the area of is 0.25 in. This delta a 14.8% loss in nominal liner plate thickness, which is than the 10% loss of material permitted by IWE-3122.3.
From the measurements taken it was found that the area in question cn.A;t::lJlClUIt:: "as-is" using from a engineering evaluation, REA 99-V AA713. In this the minimal wall thickness for this area is 0.125 in. The cause for the bulging is unknown. This area will be added to the Vogtle Containment Inspection Plan as an Augmented Examination and will be examined in the 3'd Inspection Period of the Third Interval.
The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC Engineering Programs Department scope of work. With the exception of Steam Generator Tube Inspections any reportable indications or conditions observed by VEGP Site or outside contractors during their scope of work should be identified bylto the VEGP Site in document(s) which are referenced herein. Additional information related to Steam Generator Tube are to be provided in a one hundred eighty (180) days after the initial entry into MODE 4 as required VEGP 5.6.10.
OWNER'S REPORT FOR REPAIR (ASME FORM OWN REPORTS REPAIRS REPLACEMENTS (FORM NIS-2) The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-2 since the last maintenance/refueling outage (2R15) through the completion of the sixteenth (2R16). are identified by their traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2 are filed with their traveler at the plant site. Only those NIS-2 reports to VEGP-2 are included in this report document.
Any attachments, e.g., code data etc., referenced in the NIS-2 reports will be made available for review upon at the plant site. It should be noted that even though Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the of does not the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement not NIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report. 11105 13011 13023 13074 11110 13013 13029 13075 11111 13014 13030 13076 11112 13015 13032 13080 13000 13016 13037 13081 13002 13018 13038 6 13003 13019 13040 13067 13004 13021 13043 13068 6-1 


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'.1-'.1-'-.10
The following Indication Notifications Forms and/or Condition                        were issued due to -..<>,,,,,,.-tQ indications or conditions being observed during the examination of either Class 1 or 2 components during th the sixteenth 6 ) maintenance/refueling              at VEGP-2 (referenced attachments are available at the VEGP              for review upon request.                                     as volumetric, surface or visual examinations with indications/conditions exceeding                                      standard of ASME XI, thus "analytical evaluation". Volumetric and surface examinations meeting the applicable ",,..r*<>,..,lt!:l are not considered "reportable", and will not                      be indicated on the table below.
.:....5=----
Visual indications will be included in the table, even if dispositioned as "acceptable". Generation of an "Indication Notification Report" and lor "Condition Report" as specified in the below table does not indicate a Code "Reportable" condition.
____ Owner Southern Nuclear Operating Company Date May 14, 40 Inverness Center Parkway, Birmingham, Sheet of Address Plant VogtJe Electric Generating Plant Unit Waynesboro, GA SNC342588 RepairlReplacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VogtJe Expiration Date NlA Address 4. Identification of 1208/CVCS
INF NO. and/or        Affected Component/Area                                          INF Disposition Condition R ort 113V2001          Support 21302-107-H004                                              R"'t"'r,pnl~'" Condition CR 611390          (IWF)                                             Not                              per disposition. Condition corrected per MWO SNC475383.
: 5. (a) Applicable Construction ASME Sec. /II Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2""O",OC!.1-"e""dc:..'
113V2002          Containment Liner Plale /
",20""O",3"",a",d""d"".
CR 610528          Level 1 of CNMT near            An area of the liner plate was found to have some Personnel Hatch                sections on the 220' elevation (Level 1). The area in question is about 7 ft in width and 1 ft in                      The area is about 7 fI above the floor and butts up                        the thickened penetration for the Personnel Hatch.
___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE PULLMAN POWER 14107 NlA V2-1208-047-H604 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 14117 NlA V2-1208-047-H604 1989 REMOVED YES SUPPORT PRODUCTS 7. Description of Work PSA 112 snubber serial nO.14117 was reelaced PSA 1/2 serial number 14107. Test Conducted:
The area in question was broken up into eight (8) one foot square grids and the lowest thickness was found in each grid. The lowest ultrasonic thickness measurement found was 0.213 in and nominal liner                      thickness in the area of is 0.25 in. This delta                    a 14.8% loss in nominal liner plate thickness, which is                        than the 10%
Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure psi Test Temp. ______ oF Remarks
loss of material permitted by IWE-3122.3. From the measurements taken it was found that the area in question cn.A;t::lJlClUIt:: "as-is" using                from a
_______
                                                          ,..,,,,,rr"r*m~.t4 engineering evaluation, REA 99-VAA713. In this the minimal wall thickness for this area is 0.125 in.
_________________________________
The cause for the bulging is unknown. This area will be added to the Vogtle Containment Inspection Plan as an Augmented Examination and will be examined in the 3'd Inspection Period of the Third Interval.
__ Applicable Manufacturer's Data Reports to be attached CERnFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. \,0, Type Code Symbol NlA o.s\\<\ Certificate of Authorization No. NlA Expiration Date NlA ,\. Signed or Owner's Designee, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period II I to CO /1 ') / i ';' , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC Engineering Programs Department scope of work. With the exception of Steam Generator Tube Inspections any reportable indications or conditions observed by VEGP Site                                  or outside contractors during their scope of work should be identified bylto the VEGP Site in document(s) which are referenced herein. Additional information related to Steam Generator Tube are to be provided in a                  one hundred eighty (180) days after the initial entry into MODE 4 as required VEGP                                  5.6.10.
Commissions National Board, State, Province and Endorsements Date IS'-;S VIV.: 1.c I 3 ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACllVITY All Required By The Provlalons Of The ASME Code Section XI Traveler 1# __,'-''_'_'.:...0
5*1
____ Owner Southem Nuclear Opsratlng Company Date January 24". 40 Invemess Center Parkway. Blrmln{!!Jam, AL Sheet of Addrese Plant VOgt/a Electric Generating Plant Unit Waynesboro, GA SNC338727 AepalrlReplacement Organization P.O. No., Job No., etc. Type Code Symbol Stamp NlA Name Authorization No. N/A ExpIration Date __________
 
Nlr.;,..:4
TABF OWNER'S REPORT FOR REPAIR AND REPLACEMENTS (ASME FORM NIS-2)
______ Work Performed by Plant Vogt/a Address Identification of SY8tem 12081 CHEMICAL & VOLUME CONTROL SYSTEM (a) Applicable Construction Code ASME Sec. /1/ Edition, 1972 Addenda, Winter 1972 Code ease (b) Applicable Edition of Section XI Used for RepalrJReplacement ActlvHy 2001 Eel. thru 2003 Add. (e) Applicable Section XI Code Caae(a) NlA Identification Of Components National Corrected, ASMECode Name of Hameof Manufactu,.,.
 
Board Other Year Removed, Of' Stamped Manufacturer Serial No. No. IdWltlflcatlon Built Inatalled (yesOf' No) VALVE VELAN, INC 750 /IVA 2HV8109 1989 REMOVED YES VALVE VELAN,INC 888405 NlA 2HV81 09 1987 INSTALLED YES Deacriptlon of Work Installfld replacement Viilv9. The install9d valva (SIN 888405) was orIginal/Ypurchased as a spare under PO PAV-27380.
OWN          REPORTS                REPAIRS              REPLACEMENTS (FORM NIS-2)
--8. Teet Hydroetatlc 0 PneumatleD Nominal Operating P .....ure[!] Exempt 0 Other 0 Preaaure pat Teat Temp. _____ "F
The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-2 since the last maintenance/refueling outage (2R15) through the completion of the sixteenth                                (2R16).              are identified by their            traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2                  are filed with their            traveler          at the plant site. Only those NIS-2 reports                to VEGP-2 are included in this report document. Any attachments, e.g., code data                etc., referenced in the NIS-2 reports will be made available for review upon            at the plant site. It should be noted that even though Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the               of          does not            the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement                      not          NIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report.
____________Applicable Manufacturers Data Reports to be attached CERl1FICATE OF COMPUANCE I certify that the statements made In the report are correct and that thl, confonn. to the requl.-.ments 0' the ASM! Code, SectIon XI. Type Code Symbol /IVA Certificate of Authorization No. NlA expiration NlA ..Q f"t AJVo..J-..
11105      13011        13023                  13074 11110      13013        13029                  13075 11111      13014        13030                  13076 11112      13015        13032                  13080 13000      13016        13037                  13081 13002      13018        13038            6 13003      13019        13040      13067 13004      13021        13043      13068 6-1
W 0.. Do Date ( Owner or OWner's DeeIUh... TItle V I ,... 2.") -t CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding 8 valid commlaalon laeued by the National Board of Boller and Pruaure Veuellnapectons and the atate or Province of !:i&sect;mlSl and employed by HartflJ!11. lnsoect/2l1 fI!Ut lailllacg Q2. Q/.
 
of Hartford.
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'.1-'.1-'-.10.:....5=----_ _ __
Conn9cticut have lnapected the components described In thla Owner's Report during the period-II to ,.,10-and state that to the beat of my knowledge and belief, the awner haa performed examinations and taken corrective measunMI described In thl, OWner's Report In accordance with the requirements of the ASM! Code, SectIon XI. By signing this certificate nelttler the Inspector nor his emplo)'9r makaa any wamutty, expren8d or Implied, concerning the examlnatlone and corrective meaaunMI described In thla Owner's Report. Furthermore.
: 1. Owner        Southern Nuclear Operating Company                            Date                                      May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                    Sheet                                            of Address
nelther the Inspector nor his employer shall be liable In any manner for any peflOl1al Injury Of' property damage or a 1088 of any kind arising from Of' connected with this Com......... In pector'. Nat onal Board, State, Province and Endonsements Date JQ J"  
: 2. Plant        VogtJe Electric Generating Plant                              Unit                                            2 Name Waynesboro, GA 30830                                                                          SNC342588 Address                                RepairlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                        Maintenance Deeartment              Type Code Symbol Stamp                                    NlA Name                        Authorization No.                                       NlA Plant VogtJe                      Expiration Date                                        NlA Address
: 4. Identification of System                                                              1208/CVCS
: 5.  (a) Applicable Construction Code                          ASME Sec. /II    Edition,           1977          Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2""O",OC!.1-"e""dc:..'",20""O",3"",a",d""d""._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                    Corrected,                         ASMECode Name of                  Name of                Manufacturer      Board          Other                Year                Removed, or                            Stamped Component              Manufacturer                  Serial No.       No.       Identification          Built                  Installed                          (Yes or No)
PIPE          PULLMAN POWER                        14107          NlA      V2-1208-047-H604          1989                INSTALLED                                YES SUPPORT                PRODUCTS PIPE          PULLMAN POWER                        14117          NlA     V2-1208-047-H604          1989                 REMOVED                                 YES SUPPORT                PRODUCTS
: 7. Description of Work PSA 112 snubber serial nO.14117 was reelaced PSA 1/2 serial number 14107.
: 8. Test Conducted:                            Hydrostatic  0     PneumaticD  Nominal Operating PressureD                      Exempt[Rj Other D    Pressure              psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks    .:....S~e~e.:..../~te~m~7_ _ _ _ _ _ _~_~~~~~ _ _~~_~ _________________________________
Applicable Manufacturer's Data Reports to be attached CERnFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
~,\ \,0, Type Code Symbol Stamp                                                                            NlA o.s\\<\  Certificate of Authorization No.                                   NlA               Expiration Date                                      NlA Signed
                                  ~ ,\. ~~~-----\M-'-=-'--s-uP-Ee-rin-te-n-de-n-t               Date Own~ or Owner's Designee, 1IItie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                       Georgia        and employed by     Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period II/~ II I to     CO /1 ') / i ';'          , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
Commissions National Board, State, Province and Endorsements Date     IS'-;S VIV.: 1.c I ~
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACllVITY All Required By The Provlalons Of The ASME Code Section XI Traveler 1# _ _,'-''_'_'.:...0_ _ __
: 1. Owner        Southem Nuclear Opsratlng Company                                    Date                            January    24". 2012 Name 40 Invemess Center Parkway. Blrmln{!!Jam, AL                        Sheet                                      of                    3 Addrese
: 2. Plant        VOgt/a Electric Generating Plant                                    Unit                                      2 Name Waynesboro, GA 30830                                                                                SNC338727 Addreu                                                AepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by _--"M.:.:a"'-Jnt:.:..:ena~nc~e..:;D;.;:epa=rtm=e;;.;nt~-          Type Code Symbol Stamp                              NlA Name                                      Authorization No.                                  N/A Plant Vogt/a                                        ExpIration Date _ _ _ _ _ _ _ _ _ _Nlr.;,..:4_ _ _ _ __
Address
: 4. Identification of SY8tem                                                  12081 CHEMICAL & VOLUME CONTROL SYSTEM
: 5.    (a) Applicable Construction Code                            ASME Sec. /1/ Edition,                      1972      Addenda,        Winter 1972          Code ease (b) Applicable Edition of Section XI Used for RepalrJReplacement ActlvHy 2001 Eel. thru 2003 Add.
(e) Applicable Section XI Code Caae(a) NlA II. Identification Of Components National                                                      Corrected,              ASMECode Name of              Hameof              Manufactu,.,.            Board                    Other              Year          Removed, Of'                Stamped Com~ent              Manufacturer              Serial No.              No.              IdWltlflcatlon          Built            Inatalled              (yesOf' No)
VALVE              VELAN, INC                  750                  /IVA                2HV8109              1989            REMOVED                      YES VALVE              VELAN,INC                888405                  NlA                2HV81 09              1987            INSTALLED                    YES
: 7. Deacriptlon of Work Installfld replacement Viilv9. The install9d valva (SIN 888405) was orIginal/Ypurchased as a spare under PO
--    8.
PAV-27380.
Teet Conducted:                    Hydroetatlc Other  0 0
Preaaure PneumatleD              Nominal Operating P.....ure[!]
pat Teat Temp. _ _ _ _ _ "F Exempt    0
: 9. RMna~ _~~_'_n~em~7____________~~~~~--~~~~~=_~~~~~~~-------------------
Applicable Manufacturers Data Reports to be attached CERl1FICATE OF COMPUANCE I certify that the statements made In the report are correct and that thl, confonn. to the requl.-.ments Code, SectIon XI.
0' the ASM!
Type Code Symbol Stamp                                                                                    /IVA Certificate of Authorization No.                              NlA                            expiration Date                                NlA
                                                                          ~+,
Signed        ..Q f"t AJVo..J-.. W Do  0..                                                    Date        1-~7-(~
(        Owner or OWner's DeeIUh... TItle                  ~'()    .......
V                                                              I ,... 2.") -t "2.
CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding 8 valid commlaalon laeued by the National Board of Boller and Pruaure Veuellnapectons and the atate or Province of                !:i&sect;mlSl          and employed by                HartflJ!11. ~tesm ~~ lnsoect/2l1 fI!Ut lailllacg Q2. Q/. ~~!J1.
of Hartford. Conn9cticut have lnapected the components described In thla Owner's Report during the period ~                                                            - II to    ,.,10-      4OJ.~ and state that to the beat of my knowledge and belief, the awner haa performed examinations and taken corrective measunMI described In thl, OWner's Report In accordance with the requirements of the ASM! Code, SectIon XI.
By signing this certificate nelttler the Inspector nor his emplo)'9r makaa any wamutty, expren8d or Implied, concerning the examlnatlone and corrective meaaunMI described In thla Owner's Report. Furthermore. nelther the Inspector nor his employer shall be liable In any manner for any peflOl1al Injury Of' property damage or a 1088 of any kind arising from Of' connected with this In~
      ~-~              In pector'.        ature Com.........            ~,2SZ Natonal Board, State, Province and Endonsements Date      JQ J"Arl&#xa2;~ ~0i.Ql.
 
- "~''''-'' ' ''-~~I''1< ... ~.or_, ~.-:-,..~... _~_,, _. __ ~ .._,, _ _
                  ~ .
 
ORIGINA _
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ......;1...;1...;1...:.1...;1_ _ _ __
-:;0.-. 1.      Owner        Southem Nuclear Operating Company                  Date                                                      May 2,2013 Name 40 Inverness Center Parkway, Birmingham, AL        Sheet                                                            of Address
: 2.      Plant        Voglle Electric Generating Plant                    Unit                                                            2 Name Waynesboro, GA 30830                                                                              SNC470929 Address                                Repair/Replacement Organization P.O. No., Job No., etc.
: 3.      Work Performed by              Maintenance Department              Type Code Symbol Stamp                                                    N/A Name                      Authorization No.                                                      NIA Plant Vogpe                        Explralion Date                                                        NIA Address
: 4.      Identification of System                                                    1208/CVCS
: 5.      (a) Applicable Construction Code                ASME Sec. 11/    Edition,          1974                        Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ -.!2..,O<::O'-'1...:e"'d:,:....2""OO=3-"a"'d"'d...._ __
(c) Applicable Section XI Code Case(s)
: 6.      Identification Of Components National                                                                    Corrected,                            ASME Code Name of                  Name of          Manufacturer      Board            Other                              Year                Removed, or                            Stamped Component                Manufacturer          Serial No.      No.        Identification                          Built                  Installed                            (Yes or No)
CHECK VALVE              WESTINGHOUSE        0300 1CS880000      NIA        2-1208-U6-037                            NIA                CORRECTED                                  YES 0000S74-0034
: 7.      Description of Work        Weld encapsulation cap on check valve
: 8.      Test Conducted:                  HydrostatiC  0  PneumattcD Nominal Operating Pressure[!j                                      Exempt    0 Other  0    Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
: 9.      Remarks __    S~ee_lt~e~m_7~ _ _ _ _ _ _ _~~~~~~~ _ _ _~_~_~_~ _ _~ _ _ _ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI .
Type Code Symbol            Stam~                                                          NIA Certificate of A                  oh No h--H'JI--~----'-"':"";------- Expiration Date                                                              N/A Signed .                                                                          Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comm isslon Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                  Georgia      and employed by    Hartford Steam Boiler Inspection and Insurance Co. of Connectfcut of Hartford. Connecticut have Inspected the components described in this Owner's Report during the period O'S-IZ--(-S to        "':i-3<.~-1 '3        . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the reqUirements of the ASME Code, Section XI.
By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arlslng from or connected with this inspection.
        ~0:::--'i'~",,
                      ' ,-""'~~_--:---:--::-;-----:--
* _____              Commissions    f'2A 13 Z
              ..              Inspector's Signature                                      National Board, State, Province and Endorsements Date      '3DMCI.,;) 201'3
 
              * "  .....'\'.... ... '.'" ....,. ..........
                                        ~                ~. - .'
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAlRlREPLACEMENT ACTIVITY As Required By The Provlalon8 Of Tl'Ie ASME COde Sec:tlon XI Traveler # _--:...11:..,:1..:;12=--_ __
: 1. Owner        Southern Nuclear Operating Company                                                Date                            January 24, 2012 Name 40 Inv~ Center Parkway. Blnningham, AL                                            Sheet                                    of Addl'88ll
: 2. Plant          VogtJe Electric Generating Plarrt                                                  Unit                                  2 Name Waynesboro, GA 30830                                                                                            SNC338727 Add.....                                    RepalrlReplac:ement Organization P.O. No., Job No., etc.
: 3. Work Performacl by _--:.:M:.:::8::;.In:.;;tenanc:.:.:::;;==e..=D;.;epa=1tm=en;:.;.:..t_          Type Code Symbol Slamp                          NlA Name                            Authorization No.                              NlA Plant Vogtle                            ~~D"            __________________          ~w.~~~      __________
AddI'8ll8
: 4. Idantlflcatlon of Syetam                                                                  1208 / Chemical and Volume Control System
: 6.  (a, Applicable Conetructlon Code                                          ASME See. III 1974    edition.      Summer 1975 Addenda, _---'-N/,""'~_'__ Code Case (b) Applicable !dltlon of Section XI Used for RepalrlReplacement ActIvity                                          2001 ED. 2003 ADD.
(e) Applicable Section XI Code C'&e{s)
: 6. identification Of Component.
NatIonal                                              Corrected,                ASMECode Hameof                    Name of                              Manufacturw          Board              Other                Year      Removed, or                  Stamped Component              Manufacturer                                  Serial No.            No.        Identlflc8tlon            Built        Inatalled                ev.. or No}
PIPE SYSTEM                ENERGY &                                    442305              /IVA      2K3*1208-003*01            1999      INSTALLED                        YES PROCESS CORP
: 7. Description of Woft(                          Replaced piping around valve 2HV81 09 to install valve 2HV8109, which was installed under Traveler 11110.
: a. Teat Conductacl:                                            Hydroatatlc    0    PneumatlcD    Nominal OpenItlng Pr...ureD              Exempt[!]
Other  D      Pressure                pal Teat Temp. _ _ _ _ _ "'F
: 9. Rema~ ~S~ee~lt~8m~7____________~~~~~__~~~~~~~~~~~~~___________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the Btatements made In the report are correct and that this conforms to the requirements of the ASME Code, section XI.
Type Code Symbol stamp                                                                                                /IVA
                                                              - ._ _---:>..,.---_ _Nl._:4________          ExpIratlon Date                            /IVA SIgned                                                                                                      Date        /-2J -(7...
CERTIACATE OF INSERVICE INSPECTION I, the undenalgned. holding a valid comml..lon laeued by the National Board of Boller and Preaaure V....llnspec:ton and the lItate or Provlnc:a 01                                    GeorgIa        and employed by        Hartford Steam Boller InsDgcUon W losul8/7C6 ~!1}ut of Hattford, Connecllcyt have Inspected the componente deacrlbec:lln thla Own...** Report during the perIod                                                =t=-_~~ II                  -I.~I to 1-.llJ -~, and state that 10 the beat of my knowledge and bell.f, the OWner flu performed examination. and taken                                                                    I,~,,~
corrective m"lUrea deac:rlbec:l In thl. OWner'., Report In accordance with the requirements of the ASME Code, Section XI.
By .'gnlng thla certificate neither the Inspector nor hi. employer rnak. . any warranty. expreued or Implied, concerning the examInation. and corrective m..au.... described In thl. Own..... Report. Furthermore, neither the Inspector nor hi' employer etlan be liable In any manner for any personal InJury or property damage or a loa. of any kind ar1.'ng from or connected with thl.
Ins    on.
~~~~~~~~~~?f~?!=--__                                                                      Commlsalon.      6-& ZS't.
National Board. State, Province and Endorsements
 
FORM NIS-2 OWNER'S                        Rg~~~k~ P~REPLACEMENT As Required By The Provisions Of The ASME Code Section XI ACTIVITY Traveler # --:..1.::;30::.,:0:.=0_,,-_ __
: 1. Owner            Southern Nuclear Operating Company                              Date                              June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                      Sheet                    1                of Address
: 2. Plant            Vogtl6 EleeJn"c Generating Plant                                Unit                                      2 Name Waynesboro, GA 30830                                                                            SNC376393 Address                                              Repalrl Replacement Organization P.O. No., Job No., etc.
: 3. Work Perfonned by                Maintenance Deeartment                          Type Code Symbol Stamp                              NIA Name                                Authorizatlon No.                                  NIA Plant Voqt!e                                  Expiration Date                                  NIA Address
: 4. Identification of System                                                                    1208/eVCS
: 5.  (a) Applicable Construction Code                      ASME Sec. 11/            Edition,          1977          Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2:!!O~01~ed!:!.:.....!2~O~O~3~a~dd!:!.:.'--__
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                Corrected,                ASM.E Code Name of                  Nama of          Manufacturer              Board              Other                Year        Removed, or                    Stamped Component                Manufacturer            Serial No.              No.            Identification            Built          Installed                  (Yes or No)
PIPE                    L1SEGA            305002351029              NlA        V2-120B-068-H021            NlA          INSTALLED                          YES SUPPORT PIPE            PULLMAN POWER                  14114                NlA        V2-1208-068-H021            1989          REMOVED                          YES SUPPORT                  PRODUCTS
: 7. Description of Work PSA-112 snubber serial nO.14114 was replaced with Usega 301856RF2 serial number 305002351029 to support 2R16's initial test scope
: 8. Test Conducted:                      Hydrostatic    0  pneumaticD            Nominal Operating PressureD                ExemptlKl Other    0    Pressure                      psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks _S~e~e~/rem~7      =  _ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~ _ _ _ _ _ _ _ _ _ ___
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                                NIA
                                        -,-_ _ _ _ _..;..N1..:..A:...;..._ _ _ _ _ _      Expiration Date                              NlA Signed                                                                      rintendent      Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                Georgia          and employed by              Hartford Steam Boiler Inspection and Insuronce Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period 3/'?113 to    G I I 7/1::;.            ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind ariSing from or connected with this inspection.
                /;;::..::::..",.,.~
L-,o"'.::""'---    ;  "    --------                      Commissions 7        Inspector's Signature                                                    National Board, State, Province and Endorsements
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:..3-'-00'-2_ _ _ __
: 1. Owner        Southern Nuclear Operating Company                  Date                                                        May 29, 2013 Name 40 Inverness Center Parkway, Birmingham, AL          Sheet                                                                of Address
: 2. Plant        Vogtle Electric Generating Plant                      Unit                                                                2 Name Waynesboro, GA 30830                                                                                  SNC376395 Address                                  RepairlReplacement Organization P.O. No., Job No., etc.
: 3. WorK Performed by            Maintenance Department                Type Code Symbol Stamp                                                        NIA Name                        Authorization No.                                                            NIA Plant Vogtle                        Expiration Date                                                            NIA Address
: 4. Identification of System                                            12051 Residual Heat Removal
: 5.  (a) Applicable Construction Code              ASME Sec. 111      Edition,            1977                        Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2:.:0:..:0..:.1..::ed,-=-.:;20",O:..:3. .a",d:.:d::.:.._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                        Corrected,                ASME Code Name of              Name of          Manufacturer        Board          Other                            Year                        Removed, or                Stamped Component          Manufacturer          Serial No.        No.        Identification                      Built                          Installed                (Yes or No)
PIPE                L1SEGA            31105271004        NlA    V2-1205-004-H01O                        NlA                        INSTALLED                    YES SUPPORT PIPE          PULLMAN POWER              1594f1          NlA    V2-1205-004-H010                        1989                          REMOVED                      YES SUPPORT            PRODUCTS
: 7. Description of Work PSA-10 snubbar serial no. 15946 was replaced with Lisega 306256RF3 snubber serial number 31105271004 to support2R16's initial test scope
: 8. Test Conducted:                  Hydrostatic  0    PneumaticD Nominal Operating PressureD                                              Exempt[K]
Other D    Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks _S~e~e~/te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~__~~~~~~~ ______________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                NlA
                                    -I7''-++---.._--Nl.-':4-'-------- Expiration Date                                                              NlA Signed                                                                      Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of            Georgia        and employed by      Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. ConnecUcut have inspected the components described In this Owner's Report during the period n 21 J4/1-s.
to DCe! ! I ! i"3        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
:?'/_~-                                        Commissions _ _,---..:....G;~""'
                                                                                          */A-'-_a..L.?..l..,3~r:z;;...*_ _ _~_ _ _ _ __
        ~~iI1Spector'SSlgJlatUl"                                              National Board, State, Province and Endorsements Date  !(  :s  V!\e  2.0 13
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tmve~r#~1~30~0~3__________
: 1. Owner              Southern Nuclear Operating Company                                  Date                              June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                          Sheet                                    of Address
: 2. Plant              Vogl/e Electric Generating Plant                                    Un~                                      2 Name Waynesboro, GA 30830                                                                              SNC376505 Address                                              RepairlReplacement Organlution P.O. No., Job No., etc.
: 3. Work Performed by                      Maintenance Department                          Type Code Symbol Stamp                          NIA Name                                  Authorization No.                              NIA Plant VQ9.l/e                                  Expiration Date                                NIA Address
: 4. Identification of System                                                                12011 Reactor Coolant System
: 6.  (a) Applicable Construction Code                            ASME Sec. III              Edition,          1977        Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity __~2~O~01~ed~.~2~O~03~ad~d=::.____
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                              Corrected,      ASMECode Name of                      Name of            Manufacturer                Board              Other                Year        Removed, or        Stamped Component                  Manufacturer            Serial No.                No.          Identification          Built          Installed      (Yes or No)
PIPE              PULLMAN POWER                        26755                NlA        V2-1201-03CJ..H605        1989        INSTALLED            YES SUPPORT                    PRODUCTS PIPE              PULLMAN POWER                        20212                NlA        V2-1201-030-H605          1989          REMOVED            YES SUPPORT                    PRODUCTS
: 7. Description of Work PSA-3 snubber serial no.20212 was replaced with PSA-3 serial number 26755 to support 2R16's initial test scope
: 8. Test Conducted:                            Hydrostatic    0    PneumatlcD            Nominal Operating PressureD              Exempt[Ej Other D        Pressure                      psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks _S~e~e~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=-                                                      ___      ~~~      __ ________________
                                                                                                                                              ~
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section Xi.
o f.,,4
  ,,0'\'
Type Code Symbol Stamp                                                                                      NlA
                                                        +---,:---_ _ _..:.N!.:;.;~...:...._ _ _ _ _ _ _ Explration Date                                NlA Signed                                                                            rintendent      Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                      Georgia          and employed by              Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 'Z.. /1 Lj / I '?,
to      (0/ i 7 /{ 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
          ---~~        '-7"':'-'",".:::;..--
                                      '_'_/ ...,.2=~-=:.,...~==------. ____              Commissions
                      ~ctor's Signature                                                                      National Board. State, Province and Endorsements Date    17 '-, U (\ e'0')
                              --.j            L i ..;;,


...
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .....,:1;.3,::.00=..4.:..-_ _ __
... __.._,, __
: 1. Owner                   Southern Nuclear Operating Company                                           Date                                                         May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                                   Sheet                                                                 of Address
ORIGINA FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ......;1...;1...;1...:.1...;1
: 2. Plant                   VogUe Electric Generating Plant                                               Unit                                                                 2 Name Waynesboro, GA 30830                                                                                                         SNC376508 Address                                       Repair/Replacement Organization P.O. No., Job No., etc.
_____ -:;0.-. 1. Owner Southem Nuclear Operating Company Date May 2,2013 Name 40 Inverness Center Parkway , Birmingham, AL Sheet of Address Plant Voglle Electric Generating Plant Unit GA 30830 SNC470929 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. N IPlant Explralion Date N I A Address 4. Identification of 1208/CVCS
: 3. Work Performed by                                         Maintenance Department                       Type Code Symbol Stamp                                                         NlA Name                           Authorization No.                                                             N/A Plant Voglle                              Expiration Date                                                               N/A Address
: 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ -.!2..,O<::O'-'1...:e"'d:,:.
: 4. Identification of System                                                                                      1301 I Main Steam
...2""OO=3-"a"'d"'d
: 5. (a) Applicable Construction Code                                                 ASME Sec. /1/      Edition,               1977                    Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _...:2:.:0:..:0;..:.1-=e:..:d:.:..                         . =-20~O:.:3:...;a::.;d:..:d::..:. _ __
....___ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) CHECK VALVE WESTINGHOUSE 0300 1 CS880000 NIA 2-1208-U6-037 NIA CORRECTED YES 0000S74-0034
(c) Applicable Section XI Code Case{s) N-249-1
: 7. Description of Work Weld encapsulation cap on check valve Test Conducted:
: 6. Identification Of Components National                                                                             Corrected,                     ASMECode Name of                             Name of                           Manufacturer       Board             Other                         Year                           Removed, or                         Stamped Component                         Manufacturer                               Serlal .No.       No.           Identification                    Built                             Installed                       (Yes or No)
HydrostatiC 0 PneumattcD Nominal Operating Pressure[!j Exempt Other 0 Pressure _____psi Test Temp. ______ 9. Remarks
PIPE                                 LfSEGA                            03615185'27        NlA         V2-1301-015-H007                    1989                            INSTALLED                           YES SUPPORT PIPE                   PULLMAN POWER                                     26940          NlA         V2-1301-015-H007                    1989                             REMOVED                             YES SUPPORT                           PRODUCTS
_______
: 7. Description of Work PSA 3 snubber serial number 26940 'was raplaced Usega 305253RF3 serial number 03615185'27 to support 2R16 initial test scope.
___
: 8. Test Conducted:                                                 Hydrostatic     D    PneumaticD Nominal Operating PressureD                                                 ExemptlR]
______________
Other D        Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ QF
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section XIType Code Symbol N I A Certificate of A oh No Expiration N/A Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comm isslon Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connectfcut of Hartford.
: 9. Remarks               _Se~e~/~ffi~m~7_________~_~~~~~______~~~ ______~ ___~~ ____________________
Connecticut have Inspected the components described in this Owner's Report during the period O'S-IZ--(-S to
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the AS ME
'3 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the reqUirements of the ASME Code, Section XI. By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arlslng from or connected with this inspection. Commissions f'2A 13 Z
  ~    Code, Section XI.
_____ .. Inspector's National Board, State, Province and Endorsements Date '3DMCI.,;)
:~,~\~  Type Code Symbol Stamp                                                                                                      NlA
201'3 
                                                                        *_-::-____..:.NJ..=.:A:.:.-___________ Expiration Date                                                                    NIA Superintendent      Date
* " .....'\'........ '.'" ....,...........-ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAlRlREPLACEMENT ACTIVITY As Required By The Provlalon8 Of Tl'Ie ASME COde Sec:tlon XI Traveler # _--:...11:..,:1..:;12=--
                                                                                            -;Tltle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                                           Georgia           and employed by       Hartford Steam Boiler InsDeclion and Insurance Co. of Connecticut of Hartford Connecticut have inspected the components described In this Owner's Report during the period                                                                                               Z./H /{,3 to        (2(') /1 ~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
___ Owner Southern Nuclear Operating Company Date January 24, 40 Center Parkway. Blnningham, AL Sheet of Addl'88ll Plant VogtJe Electric Generating Plarrt Unit Waynesboro, GA SNC338727 AddRepalrlReplac:ement Organization P.O. No., Job No., etc. 3. Work Performacl by _--:.:M:.:::8::;.In:.;;tenanc:.:.:::;;==e..=D;.;epa=1tm=en;:.;.:..t
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
_ Type Code Symbol NlA Authorization No. NlA __________________
___    -t-,6.,,:;&#xa3;:..:~:::..<:..---_'
__________Plant Vogtle AddI'8ll8
_/.,.,.,..p(.:;,./-:--:-:--,.-_-v--.=....--_._ _ _ _ _        Commissions _:-:-:.,.:\:.../__'<~-A::-'-_~-:-'-:':3::...L<5r'--::_-:--_--:-=-:-- __,---___
: 4. Idantlflcatlon of 1208 / Chemical and Volume Control System 6. (a, Applicable Conetructlon Code ASME See. III 1974 edition. Summer 1975 Addenda, Code Case (b) Applicable
                /                InspeCtor's Signature                                                                   National Board, State, Province and Endorsements
!dltlon of Section XI Used for RepalrlReplacement ActIvity 2001 ED. 2003 ADD. (e) Applicable Section XI Code C'&e{s) 6. identification Of Component.
NatIonal Corrected, Hameof Name of Manufacturw Board Other Year Removed, or Component Manufacturer Serial No. No. Identlflc8tlon Built Inatalled ev..or PIPE SYSTEM ENERGY & 442305 /IVA 2K3*1208-003*01 1999 INSTALLED PROCESS 7. Description of Woft( Replaced piping around valve 2HV81 09 to install valve 2HV8109, which was installed under Traveler 11110. Teat Conductacl:
Hydroatatlc 0 PneumatlcD Nominal OpenItlng Pr...ureD Other D Pressure pal Teat Temp. _____
____________
__
__________________Applicable Manufacturer's Data Reports to be CERTIFICATE OF I certify that the Btatements made In the report are correct and that this conforms to the requirements of the Code, section Type Code Symbol /IVA -.__---:>..,.---
__Nl._:4________ExpIratlon /IVA Date /-2J CERTIACATE OF INSERVICE INSPECTION I, the undenalgned.
holding a valid comml..lon laeued by the National Board of Boller and Preaaure V ....llnspec:ton and the lItate or Provlnc:a 01 GeorgIa and employed by Hartford Steam Boller InsDgcUon W losul8/7C6 of Hattford, Connecllcyt have Inspected the componente deacrlbec:lln thla Own...** Report during the perIod II to 1-.llJ  and state that 10 the beat of my knowledge and bell.f, the OWner flu performed examination.
and taken corrective m"lUrea deac:rlbec:l In thl. OWner'., Report In accordance with the requirements of the ASME Code, Section XI. By .'gnlng thla certificate neither the Inspector nor hi. employer rnak .. any warranty.
expreued or Implied, concerning examInation.
and corrective m..au.... described In thl. Own..... Report. Furthermore, neither the Inspector nor hi' employer be liable In any manner for any personal InJury or property damage or a loa. of any kind ar1.'ng from or connected with Ins
__ Commlsalon.
6-& ZS't. National Board. State, Province and Endorsements FORM NIS-2 OWNER'S ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --:..1.::;30::.,:0:.=0_,,-
___ 1Owner Southern Nuclear Operating Company Date June 01, 40 Inverness Center Parkway, B i rmingham, AL Sheet 1 of Address Plant Vogtl6 EleeJn"c Generating Plant Unit Waynesboro , GA 30830 SNC376393 Address Repa l r l Replacement Organization P.O. No., Job No., etc. 3Work Perfonned by Maintenance Deeartment Type Code Symbol Stamp Name Authorizatlon No. Plant Expiration Date NIA Address 4. Identification of 1208/eVCS
: 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
.
__ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected , ASM.E Code Name of Nama of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Ident i ficat i on Built Installed (Yes or No) PIPE L1SEGA 305002351029 NlA V2-120B-068-H021 NlA INSTALLED PIPE PULLMAN POWER 14114 NlA V2-1208-068-H021 1989 REMOVED SUPPORT 7Description of Work PSA-112 snubber serial nO.14114 was replaced w i th Usega 301856RF2 serial number 305002351029 to support 2R16's initial test scope Test Conducted: Hydrostatic 0 pneumaticD Nominal Operating PressureD Other 0 Pressure psi Test Temp. ______ 9. Remarks
__________
_________ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NIA -,-_____..;..N1..:..A:...;...
______Expiration NlA rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insuronce Co. of Connecticut of Hartford, Connecticut have I nspected the components described In this Owner's Report during the period 3/'?1 13 to G I I 7/1::;. ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind ariSing from or connected with this inspection.  
'--'  
/;;::..::::.." ; L-,o"'.::""'---------Commissions 7 Inspector's Signature National Board, State , Province and Endorsements


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:..3-'-00'-2
ORIGINAL
_____ Owner Southern Nuclear Operating Company Date May 29, 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogtle Electric Generating Plant Unit Waynesboro , GA 30830 SNC376395 Address RepairlReplacement Organization P.O. No., Job No., etc. WorK Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant Expiration Date NIA Address 4. Identification of 12051 Residual Heat Removal 5. (a) Applicable Construction ASME Sec. 111 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2:.:0:..:0..:.1..::ed,-=-.
----                    FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ~1-=3..::0..:..1.:...1 _ _ _ __
:;20",O:..:3
: 1. Owner         Southern Nuclear Operating Company                       Date                                                   April 24, 2013 Name 40 Inverness Center Parkway, Birmingham, AL               Sheet                                                           of Address
..a",d:.:d::.:..
: 2. Plant         Vogl/e Electric Generating Plant                           Unit                                                           2 Name Waynesboro, GA 30830                                                                                 SNC421904 Address                                 Repair/Replacement Organization P.O. No., Job No., etc.
___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE L1SEGA 31105271004 NlA V2-1205-004-H01O NlA INSTALLED YES SUPPORT PIPE PULLMAN POWER 1594f1 NlA V2-1205-004-H010 1989 REMOVED YES SUPPORT PRODUCTS Description of Work PSA-10 snubbar serial no.15946 was replaced with Lisega 306256RF3 snubber serial number 31105271004 to support2R16
: 3. Work Performed by                   Maintenance Department               Type Code Symbol Slamp                                                  NlA Name                       Authorization No.                                                     NlA Plant VogUe                        Expiration Date                                                       NIA Address
's initial test scope Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Other D Pressure ____psi Test Temp. ______ Remarks
: 4. Identification of System                                                    1301 - Main Steam System
_______
: 5.   (a) Applicable Construction Code                      ASME Sec. III    Edition,           1977                     Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2..,O"'O:..:.1-'e"'d"'-. ,!,2"'O""O~3""'a""d"'d.:...._ __
__
(c) Applicable Section XI Code Case(s) N-249-1
____________
: 6. Identification Of Components National                                                                   Corrected,                     ASME Code Name of             Name of                 Manufacturer     Board           Other                       Year                     Removed, or                       Stamped Component           Manufacturer                 Serial No.       No.         Identification                   Built                       Installed                     (Yes or No)
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA NlA-I7''-++---.._--Nl.-':4-'--------
PIPE                 LlSEGA                  308001251021      NIA      V2-1301*139*H004                    1989                      INSTALLED                           YES SUPPORT PIPE         ANCHOR DARLING                    485            NIA      V2-130 1- 139*H004                  1989                       REMOVED                           YES SUPPORT
Expiration Date Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. ConnecUcut have inspected the components described In this Owner's Report during the period n 21 J 4/1-s. to DCe! ! I ! i"3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions
: 7. Description of Work AD-15fL snubber serial no.485 was replaced with Lisega 303956RF2 serial number 30800/251021 to support 2RI6's inifial test scope.
__
: 8. Test Conducted:                         Hydrostatic 0   PneumatlcD Nominal Operating PressureD                                       Exempt I!]
_________
Other D     Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
National Board, State, Province and Endorsements Date ! ( :s V!\e 2.0 13 
: 9. Remarks _S~e~e~Jte~m_7_ _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~_~~~ _ _ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                        NIA tl                                NIA                Expiration Date                                                   NIA Signed                                                                              Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolier and Pressure Vessel Inspectors and the state or Province of                     Georgia       and employed by     Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have Inspected the components described In this Owner's Report during the period Q I / 15/ (3 to    O$/O~/13            . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this inspection.
_ _L&-:~~    :",-:-*_.,..,.~",,::::.......,
                                * ---::,.,.----,-_ _ _ _ _ _ _ Commissions "7          Inspector's Signature                                              National Board, State, Province and Endorsements I  Date   08 Mt\.j 2..0 I~


f.,,4 ,,0 ,'\' o FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # :.:.......1.::.3.:...01;....:3=--_ _ __
__________ Owner Southern Nuclear Operating Company Date June 01, 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogl/e Electric Generating Plant GA 30830 SNC376505 Address RepairlReplacement Organlution P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant VQ9.l/e Expiration Date NIA Address 4. Identification of 12011 Reactor Coolant System 6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity __
: 1. Owner          Southern Nuclear Operating Company                                                Date                                          May 17, 2013 Name 40 Inverness Center Par1<.way, Birmingham, AL                                      Sheet                                                of Address
____ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE PULLMAN POWER 26755 NlA V2-1201-03CJ..H605 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 20212 NlA V2-1201-030-H605 1989 REMOVED YES SUPPORT PRODUCTS 7. Description of Work PSA-3 snubber serial no.20212 was replaced with PSA-3 serial number 26755 to support 2R16's initial test scope Test Conducted:
: 2. Plant          Vogtle Electnc Generating Plant                                                    Unit                                                2 Name Waynesboro, GA 30830                                                                                                        SNC376532 Address                                                        Repair/Replacement Organization P.O. No., Job No., etc.
Hydrostatic 0 PneumatlcD Nominal Operating PressureD Other D Pressure psi Test ______ oF 9. Remarks
: 3. Work Performed by                        Maintenance Department                                    Type Code Symbol Stamp                                      NIA Name                                        Authorization No.                                          NIA Plant VO!l.tle                                        Expiration Date                                            NIA Address
_______
: 4. Identification of System                                                                                  1302 I AFWI CST Degas
___________________
: 5.   (a) Applicable Construction Code                                      ASME S6C. 1/1              Edition,                          1977    Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!!2~O.!!.01~ed~.....!!2:.l10~O.l!..3~ad~d~.'--__
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol NlA +---,:---___
(c) Applicable Section XI Code Case(s) N-249-1
_______Explration NlA rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of Hartford.
: 6. Identification Of Components National                                                          Corrected,                             ASME Code Name of                Name of                       Manufacturer                    Board                    Other                      Year      Removed, or                                Stamped Component              Manufacturer                        Serial No.                    No.           Identification                      Built        Installed                              (Yes or No)
Connecticut have inspected the components described In this Owner's Report during the period 'Z.. /1 Lj / I '?, to (0/i 7 /{ 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection. ,"':::;..--/ ._'_____ Commissions Signature National Board. State, Province and Endorsements 17 '-, '0')Date --.j U (\ eLi ..;;,
PIPE                  USEGA                        305003281100                      NlA        V2-1302-109-H013                        1989        INSTALLED                                  YES SUPPORT PIPE          ANCHOR DARUNG                                  362                      NIA        V2-1302-109-H013                        1989        REMOVED                                    YES SUPPORT
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .....,:1;.3,::.00=..4.:..-
: 7. Description of Work AD-503 snubber serial nO.362 was replaced Usega 305253RC7 serial number 305003281100 to support 2R16's initial test scope .
____ Owner Southern Nuclear Operating Company Date May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro, GA SNC376508 Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. N/A Plant Expiration Date N/A Address 4. Identification of 1301 I Main Steam 5. (a) Applicable Construction ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _...:2:.:0:..:0;..:.1-=e:..:d:.:...
: 8. Test Conducted:                                 Hydrostatic        D        PneumatlcD Nominal Operating PressureD                                  Exempt[g]
___(c) Applicable Section XI Code Case{s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serlal.No. No. Identification Built Installed (Yes or No) PIPE LfSEGA 03615185'27 NlA V2-1301-015-H007 1989 INSTALLED PIPE PULLMAN POWER 26940 NlA V2-1301-015-H007 1989 REMOVED SUPPORT Description of Work PSA 3 snubber serial number 26940 'was raplaced Usega 305253RF3 serial number 03615185'27 to support 2R16 initial test scope. 8. Test Conducted:
Other D            Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ OF
Hydrostatic D PneumaticD Nominal Operating PressureD ExemptlR]
: 9. Remarks      _s~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~_                                              _ ~~~~_~__~~~~~ _ _ __ __________
Other D Pressure ____psi Test Temp. ______ QF Remarks
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
_________
Type Code Symbol Stamp                                                                                                                  NlA
__________________________________
                                                  ---,!>i--H_.,..-_.:...N!..:...:4:.:......._ _ _ _ _ _ Expiration Date                                              NlA Signed '                                                                                  u  rintendent          Date                 {; cc> 1'~
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the ASCode, Section Type Code Symbol Stamp NlA *_-::-____..:.NJ..=.:A:.:.-
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                            Georgia                and employed by             Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period [ / i<ples to      Gp/I 5?/ / '3          ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requiremants of the ASME Code, Section XI.
___________
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pensonal injury or property damage or a loss of any kind arising from or connected with this inspection.
Expiration Date NIA Superintendent Date -;Tltle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDeclion and Insurance Co. of Connecticut of Hartford Connecticut have inspected the components described In this Owner's Report during the period Z./H/{,3 to (2(') /1 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
----4-~7.'I    .. ~;::'
___
                  ,.'----- 7<-=-.,...'"-=-------,::-_:_. _ _ _ _ _
-v--.=....--_.
                          "7'                                                              Commissions      -...,,...,....,.,G~.
_____ Commissions
                                                                                                                              .;;:.:;.:,_:_:/~~Cj_:'S~J)'---=__:_-__:_:::__:_--_:_--
_:-:-:.,.:\:.../
            /lns~tor's Signature                                                                                    National Board, State, Province and Endorsements Date    I)?    :::rV!\f    2C )7)
__,---____/.,.,.,..p(.:;,./-:--:-:--,.-_
__ / InspeCtor's Signature National Board, State, Province and Endorsements 
----ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #
_____ Owner Southern Nuclear Operating Company Date April 24 , 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogl/e Electric Generating Plant Unit Waynesboro, GA SNC421904 Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Slamp Name Authorization No. Plant VogUe Expiration Date N I A Address 4. Identification of 1301 -Main Steam System 5. (a) Applicable Construction ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....
___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 308001251021 N I A V2-1301*139*H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 485 N I A V2-130 1-139*H004 1989 REMOVED YES SUPPORT Description of Work AD-15fL snubber serial no.485 was replaced with Lis e ga 303956RF2 serial number 30800/251021 to support 2RI6's inifial test scope. Test Conducted:
Hydrostatic 0 PneumatlcD Nominal Operating PressureD ExemptOther D Pressure _____psi Test Temp. ______ Remarks
________
___________
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NIA tl NIA Expiration N I A Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolier and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boil e r Inspection and Insurance Co. of Connecticut of Hartford.
Connecticut have Inspected the components described In this Owner's Report during the period Q I/ 1 5/ (3 to . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this inspection.
__---::,.,.----,-
_______ Commissions "7 Inspector's Signature National Board, State, Province and Endorsements I Date 08 Mt\.j 2..0 ORIGIN AL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # :.:.......
1.::.3.:...01
;....:3=--
____ 1Owner Southern Nuclear Operating Company Date May 17 , 40 Inverness Center Par1<.way , Birmingham , AL Sheet of Address Plant Vogtle Electnc Generating Plant Unit Waynesboro , GA 30830 SNC376532 Address Repair/Replacement Organization P.O. No., Job No., etc. 3Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant VO!l.tle Expiration Date NIA Address 4. Identification of 1302 I AFW I CST Degas 5. (a) Applicable Construction ASME S6C. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
.__ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE USEGA 305003281100 NlA V2-1302-109-H013 1989 INSTALLED PIPE ANCHOR DARUNG 362 NIA V2-1302-109-H013 1989 REMOVED Description of Work AD-503 snubber serial nO.362 was replaced Usega 305253RC7 serial number 305003281100 to support 2R16's initial test scope . 8Test Conducted:
Hydrostatic D PneumatlcD Nominal Operating PressureD Other D Pressure ____psi Test Temp. ______ Remarks
________
__
__
____ __________ Applicable Manufacturer
's Data Reports to be attached CERTIFICATE OF I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA ---,!>i--H_.,..-_.:...N!..:...:4:.:.......
______Expiration Signed u rintendent Date {;-9-cc>1CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford.
Connecticut have inspected the components described In this Owner's Report during the period [ / i<p les to Gp/I 5?/ / '3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requiremants of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty , expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pensonal injury or property damage or a loss of any kind arising from or connected with this inspection.
.. . _____ Commissions "7'7<-=-.,...'"-=-------,::-_:_
Signature National Board, State, Province and Endorsements Date I)? :::r V!\f 2C )7) 
------___
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'-1."-30.;;..1_4
_____ Owner Southern Nuclear Operating Company Date May 40 Inverness Center Parkway, Birmingham, AL Sheet of Address 2Plant Vogtle Electric Generating Plant Unit Waynesboro , GA 30830 SNC376538 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Dee,artmant Type Code Symbol Stamp Name Authorization No. Plant Expiration Date NIA Address 4. Identification of 1204 I Safety Injection
: 6. (a) Applicable Construction ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2""O""01.:....:::;ed"'.""2""O"'03""""'ad""d"'.'--
__ (c) Applicable Section Xl Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed , or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 307005611060 NlA V2-1204-14441607 NlA INSTALLED PIPE ANCHOR DARLING 196 NlA V2-1204-144-H607 1989 REMOVED YES SUPPORT Description of Work AD-71 snubber serial no. 196 was replaced with Usaga 301856RF3 snubber serial number 307005611060 to support 2R16's initial test scce,e. Test Conducted:
Hydrostatic 0 Pneumatic D Nominal Operating Pressure D Other D Pressure ____psi Test Temp. Remarks
_______Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certJfy that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA NIA+-H4+l-+-----"---'-------
Expiration Date erintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georoia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of HartfolJi Con,necticut have Inspected the components described in this Owner's Report during the period 01//(0//3.
to ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
..Commissions _C,-+,=-I-S:-'----',
__ National Board, State, Province and Endorsements Date 1J:O::SvI\Q,20(i:, 
------
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --..:1..::3.::.0..:.c15=--
____ 1Owner Southern Nuclear Operating Company Date May 17 , 40 Inverness Center Parkway , Binningham , AL Sheet of Address Plant VogtJe Electric Generating Plant Unit Waynesboro , GA 30830 SNC376542 Address RepalrlReplacement Organization P.O. No., Job No., etc. Work Perfonned by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant VOfl!.le Expiration Date NlA Address 4. Identification of 1301 1 Main Steam System 6. (a) Applicable Construction Code ASME Sec , 11/ Edition, 1977 Addenda. Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
__ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (yes or No) PIPE LlSEGA 307005611052 NlA V2-1301-110-HOO2 1989 INSTALLED PIPE ANCHOR DARLING 1211 NlA V2-1301-110-H002 1989 REMOVED 7 , Description of AO-73 snubber serial no , 1211 was replaced Usega 301856RC7 serial number 307005611052 to support 2R16's in i tial test scope , Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating pressureD Other 0 Pressure ____psi Test Temp. 9. Remarks
__________
_ ______________________________________
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code. Section XI. Type Code Symbol NlA N/A-&--/-t'-------.,--"-"------------
Expi ration Date Date D'9-0<0/3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co , of Connecticut of H8rt1ord, Connecticut have Inspected the components described In this Owner's Report during the period I 1 I (iC'113 to (P/I'-) 1 13 , and state that to the best of my knowledge and belief , the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance w i th the requirements of the ASME Code, Se<;tion XI. By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. ___CommissionsInspector's National Board, State , Province and Endorsements 7 Date I'J "3 V n<&#xa3;':-7.t)


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Travel e r # _1-"3-'-0_16-'-
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'-1."-30.;;..1_4_ _ _ __
_____ Owner Southern Nuclear Operating Company Date April 26 , 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant VogtJe El e ctric Generating Plant Unit Waynesboro, GA SNC376544 Repair/Replacement Organization P.O. No., Job No., etc. 3Work Performed by Maintenance Dee.artment Type Code Symbol Stamp N IName Authorization No. Plant Vog.tle Expiration Dale N I A Address 4. Identification of 1301-Main Steam System 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 19 77 Addenda , Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity
: 1. Owner       Southern Nuclear Operating Company                       Date                                                 May 29,2013 Name 40 Inverness Center Parkway, Birmingham, AL               Sheet                                                       of Address
__ _ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE L1SEGA 312008131027 N I A V2*1301-127*H071 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 1190 N I A V2-1301*127*H071 1989 REMOVED YES SUPPORT Description of Work AD-71 snubber serial no. 1190 was replaced with Lisega 30 1856RF3 serial number 312008131027 to support 2R16's initial test scoe.e. Test Conducted:
: 2. Plant         Vogtle Electric Generating Plant                         Unit                                                         2 Name Waynesboro, GA 30830                                                                                        SNC376538 Address                                          Repair/Replacement Organization P.O. No., Job No., etc.
Hydrostatic D PneumatlcD Nominal Operating pressureD Other D Pressure _____psi Test Temp. ______ 9. Remarks
: 3. Work Performed by             Maintenan~    Dee,artmant                Type Code Symbol Stamp                                             NIA Name                            Authorization No.                                                   NIA Plant Vogtfe                            Expiration Date                                                    NIA Address
_______
: 4. Identification of System                                                       1204 I Safety Injection
___________________________
: 6.   (a) Applicable Construction Code                 ASME Sec. 11/       Edition,                     1977                  Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2""O""01.:....:::;ed"'.""2""O"'03""""'ad""d"'.'--__
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section XIType Code Symbol NIA -i'.Lfi--....
(c) Applicable Section Xl Code Case(s) N-249-1
___N.c..::..:.VA
: 6. Identification Of Components National                                                                   Corrected,                 ASMECode Name of               Name of         Manufacturer         Board                 Other                                 Year       Removed, or                   Stamped Component           Manufacturer           Serial No.         No.           Identification                               Built         Installed                 (Yes or No)
.:......______ Expiration NIA Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georg i a and employed by Hartford Steam Boiler Insoection and Insuran c e Co. of Connecticut of Hartford.
PIPE                 LlSEGA          307005611060          NlA        V2-1204-14441607                                NlA        INSTALLED                       YES SUPPORT PIPE         ANCHOR DARLING                 196            NlA        V2-1204-144-H607                                1989         REMOVED                       YES SUPPORT
Connecticut have inspected the components described In this Owner's Report during the period 02,//'$//"3 to DS/OI // 3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
: 7. Description of Work AD-71 snubber serial no. 196 was replaced with Usaga 301856RF3 snubber serial number 307005611060 to support 2R16's initial test scce,e.
Commissions GIl 933 7*
: 8. Test Conducted:                 Hydrostatic   0    Pneumatic  D     Nominal Operating Pressure                          D        Exempt~
Nationai Board, State, Province and Endorsements
Other   D     Pressure _ _ _ _ psi Test Temp.
'-"',
OF
: 9. Remarks _S~e~e~I~te~m~7_ _ _ _ _ _ _~_~~~~~~-~~~~-~~~~-~~---------------------
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certJfy that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                              NlA
                                      +-H4+l-+-----"---'------- Expiration Date                                                                  NIA Signed                                                          erintendent        Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of             Georoia          and employed by         Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of HartfolJi Con,necticut have Inspected the components described in this Owner's Report during the period 01//(0//3.
to   fOlZ0I(~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
----.'~~r~=-*  ~_"---:>"~
                        ..~~_      . _ _ _                    Commissions     ----,-,--Q"-"=~A'"'--,',_C,-+,=-I-S:-'----','b~_~.,_________ _
7~lOSPe~                                                                        National Board, State, Province and Endorsements Date  1J:O::SvI\Q,20(i:,


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --'1..:;3..:;0.;..18"--
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --..:1..::3.::.0..:.c15=--_ _ __
_____ Owner Southern Nuclear Operating Company Date April 26, 40 Inverness Center Parkway. Birmingham, AL Sheet 2, Plant Vogtle Electric Generating Plant Unit GA 30830 SNC376548 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp N IName Authorization No. Plant Vog.tle Expiration Date NIA Address 4. Identification of 1301 -Main Steam System 5. (a) Applicable Construction ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2.,O",O"'1..."e"'d:..:.
: 1. Owner           Southern Nuclear Operating Company                       Date                               May 17, 2013 Name 40 Inverness Center Parkway, Binningham, AL               Sheet                                       of Address
...::2""O""O"'3"'a"'d""d.:.-.
: 2. Plant           VogtJe Electric Generating Plant                         Unit                                       2 Name Waynesboro, GA 30830                                                                   SNC376542 Address                                 RepalrlReplacement Organization P.O. No., Job No., etc.
__ (c) Applicable Section XI Code Case(s) N*249*1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 30700491 I 116 NIA V2-1301-126*H031 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 504 NlA V2*1301-126-H031 1989 REMOVED YES SUPPORT Description of Work AD-153 snubber serial nO.504 was replaced with Lisega 303856RC7 serial number 307004911116 to support 2R16's initial test scope. Test Conducted:
: 3. Work Perfonned by                   Maintenance Department               Type Code Symbol Stamp                             NIA Name                      Authorization No.                                 NlA Plant VOfl!.le                    Expiration Date                                   NlA Address
Hydrostatic D PneumaticD Nominal Operating pressureD Other D Pressure _____psl Test ______ DF Remarks _______
: 4. Identification of System                                                    1301 1 Main Steam System
________________________
: 6.   (a) Applicable Construction Code                      ASME Sec, 11/   Edition,           1977         Addenda. Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,!2~O~O.!.1~ed~,-,!2~Q~O::.3~a~dd~,,--__
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NIA t---:-_____N_JlA_______Expiration NIA Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described In this Owner's Report during the period 01//(0/13 to 05"/0 i/l]l , and state that to the best of my knowledge and bellel, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss 01 any kind ariSing from or connected with this inspection.
(c) Applicable Section XI Code Case(s) N-249- 1
Commissions
: 6. Identification Of Components National                                               Corrected,                     ASMECode Name of                   Name of             Manufacturer     Board           Other               Year         Removed, or                         Stamped Component               Manufacturer               Serial No.       No.         Identification           Built           Installed                       (yes or No)
/
PIPE                     LlSEGA               307005611052      NlA      V2-1301-110-HOO2            1989           INSTALLED                           YES SUPPORT PIPE           ANCHOR DARLING                     1211          NlA     V2-1301-110-H002            1989           REMOVED                             YES SUPPORT 7,  Description of Work AO-73 snubber serial no,1211 was replaced Usega 301856RC7 serial number 307005611052 to support 2R16's initial test scope,
National Board, State, Province and Endorsements Date 01 MA.J WI3 
: 8. Test Conducted:                         Hydrostatic   0  PneumatlcD Nominal Operating pressureD                     Exempt[Kj Other 0    Pressure _ _ _ _ psi Test Temp.
OF
: 9. Remarks       _S~e~e~/~te~m~7__________~_~~~_~_                          __~_______~_______________________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code. Section XI.
Type Code Symbol Stamp                                                                        NlA
                                            -&--/-t'-------.,--"-"------------ Expi ration Date                                  N/A Date       D'9-0<0/3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                   Georgia       and employed by     Hart10rd Steam Boiler Inspection and Insurance Co, of Connecticut of H8rt1ord, Connecticut have Inspected the components described In this Owner's Report during the period                                       I 1 I (iC'113 to    (P/I '-) 1 13           , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance w ith the requirements of the ASME Code, Se<;tion XI.
By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
___-L.:~~.2!:    '-'.:....~
                        -:?-':;?
                              ~' -----                              Commissions 7      Inspector's Signature                                              National Board, State, Province and Endorsements Date   I 'J "3 V n<&#xa3;':- 7.t)      I~


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_30--"9_____ OWner Southem Nuclear Operating Company Date May 40 Invemess Center ParKway, Birmingham, Sheet of Address Plant VogUe Electric Generating Plant Unit GA 30830 SNC376549 Address RepairlReplacement Organization P.O. No., Job No., etc. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name AuthOrization No. NIA Plant Vog.t'e Expiration Date NIA Address 4. Identification of 1301-Main Steam System 5. (a) Applicable Construction Code ASME Sec. III EdItIon, 1977 AddQnda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2.... .-=2:=O""03::....::;ad,.,d"".
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1-"3-'-0_16-'-_ _ _ __
___0:..Q1.:...e"'d=:;(c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 30500263136 NlA V2-1301-136-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 490 NlA V2-1301-136-H004 1989 REMOVED YES SUPPORT 7. DeSCription of Work AD-153L snubber serial nO.490 was replaced with Lisega 303956RC7 serial number 30500263136 to support initiel test scopeTest Conducted:
: 1. Owner        Southern Nuclear Operating Company                               Date                                         April 26, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                      Sheet                                                 of Address
Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure ____psi Test Temp. ______ oF 9. Remarks See Item 7 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NlA -DoL1h1ll---..,...-
: 2. Plant       VogtJe Electric Generating Plant                                   Unit                                                 2 Name Waynesboro, GA 30830                                                                               SNC376544 Address                                             Repair/Replacement Organization P.O. No., Job No., etc.
__Nl._:4_______Expiration NlA Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NatIonal Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart1ord, Connecticut have Inspected the components described In this Owner's Report during the perIod 01/i (o/{ '3 to 0(&#xa3;/(0113 , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pel"9onal injury or property damage or a loss of any kind arising from or connected with this inspection.
: 3. Work Performed by             Maintenance Dee.artment                          Type Code Symbol Stamp                                       NIA Name                                   Authorization No.                                           NlA Plant Vog.tle                                  Expiration Dale                                            NIA Address
: 4. Identification of System                                                            1301- Main Steam System
: 5. (a) Applicable Construction Code                 ASME Sec. 11/                Edition,           1977           Addenda , Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _--"2..,O",O,-,1...,e.,d'-'..-"2~003=-,,ac>::d,,.d.:..-._ _ _
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                         Corrected,             ASME Code Name of             Name of             Manufacturer                 Board           Other               Year                     Removed, or             Stamped Component           Manufacturer             Serial No.                   No.         Identification         Built                       Installed             (Yes or No)
PIPE               L1SEGA              312008131027                  NIA      V2* 1301-127*H071          1989                     INSTALLED                 YES SUPPORT PIPE         ANCHOR DARLING                 1190                      NIA      V2-1301*127*H071            1989                     REMOVED                   YES SUPPORT
: 7. Description of Work AD-71 snubber serial no. 1190 was replaced with Lisega 30 1856RF3 serial number 312008131027 to support 2R16's initial test scoe.e.
: 8. Test Conducted:                    Hydrostatic   D        PneumatlcD Nominal Operating pressureD                                    Exempt[j Other D     Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks     _S~ee~lt~em~7~ _ _ _ _ _ _ _~~~_~_~ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI .
Type Code Symbol Stamp                                                                              NIA
                                              -i'.Lfi--....___N.c..::..:.VA.:......_ _ _ _ _ _ Expiration Date                                            NIA Signed                                                                                    Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of              Georgia        and employed by                Hartford Steam Boiler Insoection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 02,//'$//"3 to DS/OI // 3            , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
          --~--'~~or_=---;--~..:;.o""'-~::_:_-~-------                              Commissions        GIl      933
' - "' ,      7
* iflSPectof'SSi9flature                                                            Nationai Board, State, Province and Endorsements
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --'1..:;3..:;0.;..18"--_ _ _ __
: 1. Owner        Southern Nuclear Operating Company                      Date                                                  April 26, 2013 Name 40 Inverness Center Parkway. Birmingham, AL            Sheet                                                            of Address 2,    Plant        Vogtle Electric Generating Plant                        Unit                                                            2 Name Waynesboro, GA 30830                                                                                SNC376548 Address                                  Repair/Replacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                Maintenance Department                Type Code Symbol Stamp                                                  NIA Name                        Authorization No.                                                      NlA Plant Vog.tle                      Expiration Date                                                        NIA Address
: 4. Identification of System                                                  1301 - Main Steam System
: 5.    (a) Applicable Construction Code                    ASME Sec. /1/    Edition,          1977                      Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2.,O",O"'1..."e"'d:..:....::2""O""O"'3"'a"'d""d.:.-._ _
(c) Applicable Section XI Code Case(s) N*249*1
: 6. Identification Of Components National                                                                    Corrected,                    ASME Code Name of                Name of            Manufacturer      Board            Other                          Year                    Removed, or                      Stamped Component            Manufacturer              Serial No.        No.        Identification                    Built                      Installed                    (Yes or No)
PIPE                LlSEGA            30700491 I 116      NIA      V2-1301-126*H031                      1989                      INSTALLED                          YES SUPPORT PIPE        ANCHOR DARLING                  504            NlA      V2*1301-126-H031                      1989                      REMOVED                          YES SUPPORT
: 7. Description of Work AD-153 snubber serial nO.504 was replaced with Lisega 303856RC7 serial number 307004911116 to support 2R16's initial test scope.
: 8. Test Conducted:                      Hydrostatic D    PneumaticD Nominal Operating pressureD                                        Exempt[Rj Other  D    Pressure _____ psl Test Temp. _ _ _ _ _ _ DF
: 9. Remarks      _S~ee~lt~em--,7--, _ _ _ _ _ _ _~~~~~_~ _ _~~_~ _ _ _~_~ ____________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                      NIA t---:-_____N_JlA_ _ _ _ _ _ _ Expiration Date                                                              NIA Signed                                                                            Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                Georgia        and employed by    Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described In this Owner's Report during the period 01//(0/13 to 05"/0 i/l]l              , and state that to the best of my knowledge and bellel, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss 01 any kind ariSing from or connected with this inspection.
---,~>""'::~~~-~==----:,...~'V'''''-__.,_---=------------        Commissions
      /          TnSj)6Ctor'SSignatUre                                            National Board, State, Province and Endorsements Date    01 MA. WI3 J
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_30--"9_ _ _ __
: 1. OWner        Southem Nuclear Operating Company                          Date                                                                    May 28,2013 Name 40 Invemess Center ParKway, Birmingham, AL                Sheet                                                                          of Address
: 2. Plant        VogUe Electric Generating Plant                            Unit                                                                          2 Name Waynesboro, GA 30830                                                                                                SNC376549 Address                                        RepairlReplacement Organization P.O. No., Job No., etc.
: 3. Work Perfonned by              Maintenance Department                    Type Code Symbol Stamp                                                                NIA Name                              AuthOrization No.                                                                      NIA Plant Vog.t'e                            Expiration Date                                                                      NIA Address
: 4. Identification of System                                                    1301- Main Steam System
: 5.  (a) Applicable Construction Code                    ASME Sec. III      EdItIon,                    1977                          AddQnda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2....                  0:..Q1.:...e"'d=:;.-=2:=O""03::....::;ad,.,d""._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                                  Corrected,        ASME Code Name of              Name of          Manufacturer            Board            Other                                      Year                      Removed, or          Stamped Component            Manufacturer          Serial No.              No.        Identification                                  Built                        Installed        (Yes or No)
PIPE                LlSEGA            30500263136              NlA    V2-1301-136-H004                                    1989                      INSTALLED              YES SUPPORT PIPE          ANCHOR DARLING                490                NlA    V2-1301-136-H004                                    1989                        REMOVED              YES SUPPORT
: 7. DeSCription of Work AD-153L snubber serial nO.490 was replaced with Lisega 303956RC7 serial number 30500263136 to support 2R16's initiel test scope .
: 8. Test Conducted:                  Hydrostatic      0      PneumaticD Nominal Operating PressureD                                                      Exempt[Rj Other D        Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks        See Item 7
                        ~~~~-------~A-p-pl~lca~b7Ie~M~a-n-Ufa~ct~u-r-e~r8~D~a~ta~R~e-p-o-rts~t~o~b~e-a~tta~c~h-e~d------------
CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
~~  Type Code Symbol Stamp                                                                            NlA
                                        -DoL1h1ll---..,...-_ _Nl._:4_ ______ Expiration Date                                                                          NlA Signed'                                                                              Date            si~81l3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NatIonal Board of Boller and Pressure Vessel Inspectors and the state or Province of              Georgia          and employed by      Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart1ord, Connecticut have Inspected the components described In this Owner's Report during the perIod 01/ i (o/{ '3 to 0(&#xa3;/(0113                , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pel"9onal injury or property damage or a loss of any kind arising from or connected with this inspection.
      -----.~""""'~-:---"/;..=~-:--::-:----:-----                    Commissions                              S -=-3--=..<<S--,-----_--=---:----_ __
                                                                                                    *, Ii-,--'*-,-
_---->....:::C=-:..L Inspec~to ...s I  Signature                                            N  atlonaI Boa rd , State, P                          rovlnce '        an d End orsements Date  /0 "1 u !\.(.lD I .~
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'.1..:.3-'-02;;..1'--_ _ __
: 1. Owner        Southern Nuclear OperaUng Company                      Date                                                  May 30, 2013 Name 40 Inverness Center Parkway, Birmingham, AL            Sheet                                                        of Address
: 2. Plant        Vogtle Electric Generating Plant                        Unit                                                          2 Name Waynesboro, GA 30830                                                                                    SNC376560 Address                                    Repair/Rep/acement Organization P.O. No., Job No., etc.
: 3. Work Perfonned by              Maintenance Department                Type Code Symbol Stamp                                                NlA Name                          Authorization No.                                                    NIA Plant VOQtle                        Expiration Date                                                      NIA Address
: 4. Identification of System                                                1301 I Main Steam System
: 5.    (a) Applicable Construction Code                ASME Sec. fII      Edition,                  1977                  Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....::2"'O"'-01.:..=ed"".....2""OO:z.3"-'O.ad""d".,._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                    Corrected,                    ASME Code Name of                Name of          Manufacturer      Board              Other                              Year              Removed, or                      Stamped Component              Manufacturer          Serial No.        No.          Identification                          Built              Installed                      (Yes or No)
PIPE          ANCHOR DARLING                224            NlA        V2-1301-104-H002                          1989              INSTALLED                          YES SUPPORT PIPE          ANCHOR DARLING                245            NlA        V2-1301-104-HOO2                          1989              REMOVED                            YES SUPPORT
: 7. Description of Work AD-5503 snubber serial no. 245 was raplaced with AD-5503 serial number 224 to support 2R16's initial test scope.
: 8. Test Conducted:                  Hydrostatic D    PneumaticD      Nominal Operating PressureD                                    Exempt[Ej Other 0      Pressure              psi Test Temp. _ _ _ _ _ _ OF
: 9.      Remarks    _S~e~e~/~te~m~7_ _ _ _ _ _ _~__~~~~~~_~~~=-                                    ____~__~___________________
Applicable Manufacturer's Data Reports to be attached
                                                                    . CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
,,0,      Type Code Symbol Stamp                                                                          NlA
~      ~~
olJ...""  Certificate of Autho~~atio~NO~ \.________-'-N/,.:;.~_'_________ Expiration Date                                                                  NlA Signed                  v\* \;;;'~.r"                b      Superintendent      Date          _~.......1.\.l..n""""\.l..n~___
Owne~r Owner's Designee, 'tItle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of              Geomia        and employed by      Hartford Steam Boiler InliPection aiJSJ Insurance Co. of Connecticut of Hartford. Connecficvt have Inspected the components described In this Owner's Report during the period (') ' / /{/ / / "<
to e(e /2 ;:./ i " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the Bxaminations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a IOS5 of any kind arising from or connected with this inspection.
                  ~          ________    ~~-                          Commissions    ---:~C::_---.-,,' A
                                                                                                          ~---,:-9 -:;:3'.,--:-<<,'---=----:-_---:--=-:--_--:-_ ___
_~s S i g n a t u r e .                                                    National Board, State, Province and Endorsements Date    25    :Jl.'l\f    LC 13
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--:.1..::.3.:.;02::.,:3'--_ _ __
: 1. Owner        Southem Nuclear Operating Company                                    Date                                                    June 01, 2013 Name 40 Invemess Center Parkway, Birmingham, AL                          Sheet                                                            of Address
: 2. Plant        Vogtle Electn"c Generating Plant                                    Unit                                                            2 Name Waynesboro, GA 30830                                                                                              SNC376567 Address                                            RepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                Maintenance De&#xa3;!.artment                        Type Code Symbol Stamp                                                    N/A Name                                AuthOrization No.                                                        N/A Plant Vogpe                                    Explrallon Date                                                        N/A Address
: 4. Identification of System                                                            13021 AFWand CST Degas
: 6.  (a) Applicable Construction Code                      ASME Sec. 1/1            Edition,                  1977                  Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _""2..,O",,O:.:.1...::ed==-              . .:.20""O:..:3,-,a~d""d::.._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                      Corrected,                        ASME Code Name of            Name of                Manufacturer              Board              Other                          Year                      Removed, or                          Stamped Component          Manufacturer                  Serial No.              No.          Identification                      Built                      Installed                        (Yes or No)
PIPE                USEGA                  306006571124              NlA        V2-1302-109-H025                      NlA                      INSTALLED                              YES SUPPORT PIPE        ANCHOR DARLING                      672                NlA        V2-1302-109-H025                      1989                      REMOVED                              YES SUPPORT
: 7. Description of Work AD-1603 snubber seriel no 672 was replaced with Usege 306256RC7 serial number 306006571124 to support 2R16's initial test scope
: 8. Test Conducted:                      Hydrostatic    0        PneumaticD Nominal Operating pressureD                                            Exempt[Rj Other    D    Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
: 9. Rema~s ~S::..:e::..:e~/~le~m~7_ _ _ _ _ _ _ _~_~~~~~ _ _~~_~ _ _~ _ _~__~ ___________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                                      NlA h4t-h'--_ _ _-'-Nl..::..:....::4_ _ _ _ _ _ Expiration Date                                                            NlA Signed                                                                      rintendent      Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                Georgia          and employed by            Hertford Steam Boiler Inspection end Insurance Co. of Connecticut of Hertford, Connecticut have Inspected the components described In this Owner's Report during the period r) / /1 ft* 1/'3 to 0(",/11 /13            , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
__L-b-:>.~:6-"~==-:
                  *-~r_~*
                      .d-"__:_
                            * --=:-~~:-_-_      . ___                                                    !l~~~
Commissions ---:-.-G,:,:,"---,,,,,,
                                                                                                        -        ,-()':-'-?5"~__=____:--:_=__:_                        _ __:_---
7 '"        Insf5eCtOf'SSignature                                                      National Board, State, Province and Endorsements Date  II  :IIWe.. 20) :3
 
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..;,.3.:...02.;..9'--_ _ __
: 1. OWner          Southern Nuclear 0pereting Company                                    Date                                            May 10, 2013 Name 40 Inverness Center Parkway, Binningham, AL                          Sheet                                                    of Address
: 2. Plant          Vogtle Electric Generating Plant                                      Unit                                                    2 Name Waynesboro, GA 30B30                                                                                      SNC3765B2 Address                                            RepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                      Maintenance Department                          Type Code Symbol Stamp                                          NIA Name                                  Authorization No.                                                NlA Plant Vogtle                                  Expiration Date                                                NIA Address
: 4. Identification of System                                                                        120B/CVCS
: 5.    (a) Applicable Construction Code                            ASME Sec. /JI          Edition,          1977                Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...:2"'O...                        ed""...:2"'
01........ . O"'O,.,3..,a""dd""'-
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                Corrected,                    ASME Code Name of                    Name of                Manufacturer            Board              Other                      Year                  Removed, or                      Stamped Component                Manufacturer                Serial No.              No.            Identification                  Built                  Installed                    (Yes or No)
PIPE            ANCHOR DARLING                        752                NlA        V2-1208-002-H004                  1989                INSTALLED                          YES SUPPORT PIPE            ANCHOR DARLING                        750                NlA        V2-1208-002-H004                  1989                  REMOVED                            YES SUPPORT
: 7.      Description of Work AD-41 snubber serial no. 750 was replaced AD-41 serial number 752 to support 2R16's augmented test                                                        scope.
: 8. Test Conducted:                          Hydrostatic      D      PneumaticD        Nominal Operating PressureD                              ExemptlK!
Other D          Pressure                  psi Test Temp. _ _ _ _ _ _ oF
: 9.      Rema~s ~S~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~___~~-~--~~-~-------------------
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                                      NlA NlA                                                                                    NlA Signed                                                                            rintendant      Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                        Georgia            and employed by          Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period I /i (oil "]
to ( 1/1! / 1:3                  , and state that to the best of my knowledge and belief, the Owner has performed exam inations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
            ~/~-_________                                                      C      I '
--7~;;40:"':':::"---'I-ns7)p""e""c..,.to-r'..,.S-=S:-lg-n::.a-:-tu-r-e--------  omm sSlons National Board, State, Province and Endorsements Date      1\  -:}uf\e      ZCt3
 
ORIGINA FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1..:;3~03::..;0,-- _ _ __
: 1. Owner        Southern Nuclear Operating Company                              Date                                              May 28, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                      Sheet                                                    of Address
: 2. Plant          Vogl/e Electric Generating Plant                                Unit                                                    2 Name Waynesboro, GA 30830                                                                                SNC376584 Address                                        RepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                  Maintenance Dee.artment                    Type Code Symbol Stamp                                          NIA Name                              Authorization No.                                              NlA Plant Vogt/e                              ExplraUon Date                                                NlA Address
: 4. Identification of System                                                          1301/ Main Steam System
: 5.    (a) Applicable Construction Code                      ASME Sec. 1/1            Edition,            1977            Addenda, Winter 1977 (b) Applicable Edition of Sect/on XI Used for RepalrlReplacement Activity _""2""O""Oc.:.1,."e",,d,,-... 20""O",,3<.,:a,.,d,.,d..._ __
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                            Corrected,                  ASMECode Name of              Name of                Manufacturer            Board            Other                Year                      Removed, or                      Stamped Component            Manufacturer                Serial No.              No.        Identification            Built                        Installed                  (Yes or No)
PIPE                  LlSEGA                312008131024              NlA      V2-1301-109-H002              NlA                      INSTALLED                        YES SUPPORT PIPE          ANCHOR DARLING                    697                  NlA      V2-1301-109-H002            1989                        REMOVED                          YES SUPPORT
: 7. Description of Work AD-73 snubber serial nO.697 was replaced by Usega serial number 312008131024 to support 2R16's augmented test scope.
: 8. Test Conducted:                        Hydrostatic D      PneumaticD          Nominal Operating PressureD                            Exempt[E]
Other D      Pressure                  psi Test Temp.                                      OF
: 9. Remarks ~S::..;e~e~/~te::..;m~7__________~__~~~~~ _ _~~~~__~~~~~_~_________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp ,                                                                            NlA
_ _ _ _ _ _ _.;..N1.::..;I4..:-_ _ _ _ _ _ _  Expiration Date                                            NlA Signed
          /
Date      -5/a:r/ /3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                  Georgia        and employed by            Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford Connecticut have Inspected the components described in this Owner's Report during the period 01/1(,,/13 to 0(', 110/ 13              , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
      -;:;~-~-
----~~~~'~I~ns~pe--c-to~r~'s~S~I*g-n-a-tu-r-e------------
Commissions          ('~ A ~:3 g
                                                                                        --~N~at-I~~I~B~~d~S~ta~t~P~~*~--~d~E~d~-----ts--------
ona oar,
* e, rovmce an                    n orsemen Date    IC::s"v/le-ZO 13
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #I --,1..:;3~03=-=2=--- _ _ __
: 1. Owner          Southern Nuclear Operating Company                            Date                                    May 10, 2013 Name 40 Inverness Center Parkway, Birmingham. AL                  Sheet                                            of Address          .
: 2. Plant          Vogtle Electric Generating Plant                              Unit                                            2 Name Waynesboro, GA 30830                                                                              SNC376585 Address                                      RepairlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                    Maintenance Dee!:!.rtment              Type Code Symbol Stamp                                    NIA Name                            AuthOrization No.                                        NIA Plant VOfl.tle                        expiration Date                                          NlA Address
: 4. Identification of System                                                              13011 Main Steam
: 5.  (a) Applicable Construction Code                        ASME Sec. III      Edition,              1977          Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2""O,!<01.:..=ed"".....,2""O"'Q""3.,.a".dd"".'--__
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                      Corrected,                  ASME Code Name of                  Name of              Manufacturer        Board              Other                      Year          Removed, or                    Stamped Component                Manufacturer              Serial No.        No.          Identification                Built            Installed                  (Yes or No)
PIPE                    LlSEGA              312008131029        NJA        V2-1301-"'-H002                  1989          INSTALLED                        YES SUPPORT PIPE            ANCHOR DARLING                      695          NJA        V2-'301-'1'-H002                1989            REMOVED                        YES SUPPORT
: 7. Description of Work AD-73 snubber serial no.695 was replaced Lisega 301856CR7 serial number 312008131029                                          to    support 2R16 's aUfl.mented test scope.
: 8. Test Conducted:                          Hydrostatic    0    PneumatlcD Nominal Operating PressureD                            Exempt~
Other D      Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks ~S=-=ee~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~-~~~~~-~-------------
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                                NJA Certificate of Auth                                              NJA                  Expiration Date                                      NJA Signed                                                              Superintendent      Date nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                    Georgia        and employed by        Hartford Stlism Boillir Inspection and Insurenr;e Co. of Connecticut of Hartford: Connecticut have inspected the components described in this Owner's Report during the period I liC" /I]?
to    &71~ 213                ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or B loss of any kind arising from or connected with this Inspection.
        ---'~~::::.-~---,.-/<T;---7~rt_
                                  . ~~::__::..,-----_                                        ::::-'::=-A!.:-=:-(1.l......=:3:,-CO'~_=---:--_--:-=--:--_--:- ___
7Tns~'Yo'r'SSignature
__                                                                    Commissions    _,.,.-G National Board, State, Province and Endorsements Date    Ilj ~ Jf\.P        ZQ \ 3
 
L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1.::.3~03:.:7_ _ _ __
: 1. Owner        Southern Nuclear Operating Company                    Date                                            June 11, 2013 Name 40 Invemess Center Parkway. Birmingham, AL            Sheet                                                    of Address
: 2. Plant        Vogtle Electric Generating Plant                        Unit                                                    2 Name Weynesboro, GA 30830                                                                                SNC446714 Address                                      Repair/Replacement Organization P.O. No., Job No., etc.
: 3. Work Perfonned by            Maintenance Department                Type Code Symbol Stamp                                          NIA Name                          Authorization No.                                              NlA Plant Vogtle                          Expiration Date                                                NIA Address
: 4. Identification of System                                                        1301 I Main Steam
: 5.    (a) Applicable Construction Code                ASME Sec. 11/      Edition,                1977                Addenda,          No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2'-"O.:.01..:....::.ed"'.'-'2...00=3-=a""dd"'.:.--_=-.....;..;~-
(c) Applicable Section XI Code Case(s)
: 6. Identification Of Components National                                                              Corrected,                ASME Code Name of                Name of        Manufacturer      Board                Other                        Year            Removed, or                  Stamped Component            Manufacturer          Serial No.        No.          Identification                      Built              Installed                (Yes or No)
VALVE              ROCKWELL                00-63          NlA              2HV3016A                          NlA            CORRECTED                      YES
                      /NTERNA TIONAL
: 7. Description of Work Replace Gate on 2HV3016A
: 8. Test Conducted:                  Hydrostatic  0  PneumatlcD      Nominal Operating Pressure[R]                          ExemptD Other  0    Pressure              psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks _See~~/~re~m~7__________~_~~~~~~_~~~=- ~~~~~ ~                                    __                        __ ______________________
Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Sta                                                                            NlA
                                      -hlf-llf----..:..N!,:.:}:\-'-------- Expiration Date                                                NIA Signe .                                                      uperintendent        Date          6'/dO IoV13 CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of              Geomle        and employed by      Hartford Steam Boiler Ins!)8ction and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period . 3/1'\ / J ~
to    c;. /'2- $'11 J.        . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer Shill' be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
    /"
      ?~~          Inspector's Signature Commissions    _:'!'f"'":*~:'-
                                                                                          , A~,...:9::::.~c::..,.-'?:--::--:-:---=-~_----:-:=--~--:----
National Board, State, Province and Endorsements Date    z..s -:J \/.'\  .. 2 D I ~
: 1. Owner        Southern Nuclear Opera ling Company ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Date Traveler it ---'1-=3..:.0-=.38.:......_ _ _ __
May I, 2013 Name 40 Inverness Center Parkway, Birmingham, AL            Sheet                                                of Address
: 2. Plant        Vogtle Electric Generating Plant                      Unit                                              2 Name Waynesboro, GA 30830                                                                        SNC446715 Address                                RepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by                Maintenance Dee.artment            Type Code Symbol Stamp                                      NIA Name                        Authorization No.                                          NIA Plant Voglle                      Expiralion Dale                                            NlA Address
: 4. Identification of System                                                    1301 I Main Steam
: 5.  (a) Applicable Construction Code                  ASME Sec. 11/    Edition,          1977              Addenda,              No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _~2~O~01"-",ed"".~2~O~03::!....!!.ad~d",,._ _  ::::----'-'-=---
(c) Applicable Section XI Code Case(s)
: 6. Identification Of Components National                                                      Corrected,                        ASME Code Name of                Name of            Manufacturer      Board            Other                  Year              Removed, or                          Stamped Component              Manufacturer            Serial No.      No.        Identification              Built                Installed                        (Yes or No)
VALVE              ROCKWELL                  OE-78          NIA          2HV3026A                    NIA              CORRECTED                              YES INTERNA TJONAL
: 7. Description of Work Rep/ace Gate on 2HV3026A
: 8. Test Conducted:                      Hydrostatic  0    PneumaticD Nominal Operating Pressure[R]                        ExemptD Other D    Pressure _____ psl Test Temp. _ _ _ _ _ _ oF
: 9. Remarks      _S~ee~l/-=.em~7---, _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                    NIA H+-_---:;o..--_ _N_YA_ _ _ _ _ _ _ Expiration Date                                          NIA Signed                                                                          Date        5lC't(L~
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of                Georgia      and employed by    Hartford Steam BOiler Insoection and tnsurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3 I 3 to CXr,- 0' \:,          , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
Commissions
Commissions
_---->....:::C=-:..L
.- I Date ii1;pector's Signature OL(JUf\&#xa2;., -;        0 /,3, National Board, State, Province and Endorsements
*, Ii-,--'*-,-S-=-3--=..<<S--,-----_--=---:----
___ ...s NIB oa rd S tate, P' d E n datlona , rovlnce an orsements Date /0 " 1 u !\.(.lD I 
,,0, olJ...""
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'.1..:.3-'-02;;..1'--
____ Owner Southern Nuclear OperaUng Company Date May 30 , 40 Inverness Center Parkway , Birmingham, AL Sheet of Address 2Plant Vogtle Electric Generating Plant Unit Waynesboro , GA 30830 SNC376560 Address Repair/Rep/acement Organization P.O. No., Job No., etc. 3Work Perfonned by Maintenance Department Type Code Symbol Stamp Name Authorization No. N IPlant VOQtle Expiration Date NIA Address 4. Identificat i on of 1301 I Main Steam System 5. (a) Applicable Construction Code ASME Sec. fII Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....::2"'O"'-01.:..=ed"".....2""OO:z.3"-'O.ad""d".,.
___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE ANCHOR DARLING 224 NlA V2-1301-104-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 245 NlA V2-1301-104-HOO2 1989 REMOVED 7. Description of Work AD-5503 snubber serial no.245 was raplaced with AD-5503 serial number 224 to support 2R16's initial test scope. 8Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Other 0 Pressure psi Test Temp. ______ 9. Remarks
________________________________
__ Applicable Manufacturer's Data Reports to be attached . CERTIFICATE OF I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA Certificate of .\________
________ Expiration NlA Signed v\*
b Superintendent Date
___
Owner's Designee, 'tItle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Geomia and employed by Hartford Steam Boiler InliPection aiJSJ Insurance Co. of Connect i cut of Hartford.
Connecficvt have Inspected the components described I n this Owner's Report during the period (') ' //{/ / / "< to e(e /2 ;:./i " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty , expressed or implied , concerning the Bxaminations and corrective measures described in this Owner's Report. Furthermore , neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a IOS5 of any kind arising from or connected with this inspection. ________
.,--:-<<,'---=----:-_---:--=-:--_--:-
____Commissions -:;: 3'_ Signature.
National Board , State, Province and Endorsements Date 2 5 :J l.'l\f LC 13 


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--:.1..::.3.:.;02::.,:3'--
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..........;1..:;3.,:.04.;..0'--_ _ __
____ Owner Southem Nuclear Operating Company Date June 01, 40 Invemess Center Parkway, Birmingham, AL Sheet of Address Plant Vogtle Electn"c Generating Plant Unit Waynesboro , GA 30830 SNC376567 Address RepalrlReplacement Organization P.O. No., Job No., etc. Work Performed by Maintenance De&#xa3;!.artment Type Code Symbol Stamp Name AuthOrization No. Plant Explrallon Date N/A Address 4. Identification of 13021 AFWand CST Degas 6. (a) Applicable Construction ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _""2..,O",,O:.:.1...::ed==-.
: 1. Owner             Southern Nuclear Operating Company                                                       Date                               May 1, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                                             Sheet                     1              of Address
___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE USEGA 306006571124 NlA V2-1302-109-H025 NlA INSTALLED PIPE ANCHOR DARLING 672 NlA V2-1302-109-H025 1989 REMOVED Description of Work AD-1603 snubber seriel no 672 was replaced with Usege 306256RC7 serial number 306006571124 to support 2R16's initial test scope Test Conducted:
: 2. Plant             Vogtle Electric Generating Plant                                                         Unit                                     2 Name Waynesboro, GA 30830                                                                                                   SNC446717 Address                                                           Repair/Replacement Organization P.O. No., Job No., etc.
Hydrostatic 0 PneumaticD Nominal Operating pressureD Other D Pressure ____psi Test ______ oF 9
: 3. Work Performed by                           Maintenance Dee.artment                                         Type Code Symbol Stamp                           NlA Name                                               AuthorlzaUon No.                               N/A Plant Vogfle                                                  Expiration Date                                 N/A Address
________
: 4. Identification of System                                                                                            1301 I Main Steam
_________________________
: 5.   (a) Applicable Construction Code                                        ASME Sec. 11/                     Edition,           1977         Addenda,         No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2",O",-01.!...!Ced",.-=2",O:,:O:::.3.=.a::::;dd",.,--_:::--'-'-=--
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NlA h4t-h'--___-'-Nl..::..:....::4
(c) Applicable Section Xl Code Case(s)
______Expiration NlA rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hertford Steam Boiler Inspection end Insurance Co. of Connecticut of Hertford, Connecticut have Inspected the components described In this Owner's Report during the period r)/ /1 ft* 1/'3 to 0(",/11 /13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
: 6. Identification Of Components National                                                         Corrected,                           ASMECode Name of                     Name of                     Manufacturer                 Board                       Other                 Year       Removed, or                             Stamped Component                 Manufacturer                       Serial No.                   No.                   Identification           Built         Installed                           (Yes or No)
__
VALVE                  ROCKWELL                              OC-11                      NIA                    2HV3006B                NlA       CORRECTED                                  YES INTERNA T10NAL
Commissions
: 7. Description of Work Replace Gate on 2HV3006B
---:-.-G,:,:,"---,,,,,,
: 8. Test Conducted:                                 Hydrostatic         D      PneumaticD                 Nominal Operating pressure[!]              ExemptD Other     0        Pressure                               psi Test Temp. _ _ _ _ _ _ *F
____ -7 '" Insf5eCtOf'SSignature National Board, State, Province and Endorsements Date II :IIWe.. 20) :3 
: 9. R~arks ~S~e~e~/~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=----~~--~------------
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
N/A
                                                    +/--hH-....c;,;:c--.;...:;.;-'------- Expiration Date                                                        NlA Signed        -f-~=-"""--"_'_':!:'-&#xa5;-~-:::.=':..:-:""--~..,..L-::..:u:.<O.pe:..:.nc..c*nt:..:..:en.;.::d..:..;en~t    Date$/df                /13 CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                             Georgia                 and employed by                     Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Conneciicut have inspected the components described in this Owner's Report during the period Q3/ 1"1 / I ;'
to     OG(/ 0/13                   . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken cOl'Tective meaSures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectlon.
___~U~~=.......,,...*..:;.e=L---:
                                *~---:---=:7----:-   _______                              Commissions
      /~            Inspector's Signature                                                                              National Board, State, Province and Endorsements Date   i(' "0 i wi? 20 13


FORM NIS*2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..;,.3.:...02
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY Ae Required By The Provisions Of The ASME Code Section XI Tmv~#~1~304~3~________
.;..9'--____ OWner Southern Nuclear 0pereting Company Date May 10, 40 Inverness Center Parkway, Binningham , AL Sheet of Address Plant Vogtle Electric Generating Plant Unit GA 30B30 SNC3765B2 Address RepalrlReplacement Organization P.O. No., Job No., etc. Work Performed by Ma i ntenance Department Type Code Symbol Stamp Name Authorization No. Plant Expiration Date NIA Address 4. Identification of 120B/CVCS
: 1. Owner        Southern Nuclear Operuting Company                     Date                                             June 11, 2013 Name 40 Inverness Center Parkway, Birmingham, AL           Sheet                                 1                      of         1 Address
: 5. (a) Applicable Construction Code ASME Sec. /JI Edition , 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...:2"'O...01 ed""...:2"'O"'O,.,3..,a""dd""........ . (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected , ASME Code Name of Name of Manufacturer Board Other Year Removed , or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE ANCHOR DARLING 752 NlA V2-1208-002
: 2. Plant         VogtJe Electric Generating Plant                       Unit                                                         2 Name Waynesboro, GA 30830                                                                                SNC446720 Address                                   Repair/Replacement Organization P.O. No., Job No., etc.
-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 750 NlA V2-1208-002-H004 1989 REMOVED YES SUPPORT 7. Description of Work AD-41 snubber serial no. 750 was replaced AD-41 serial number 752 to support 2R16's augmented test scope. Test Conducted:
: 3. Work Perfonned by             Maintenanoo Department                 Type CO<kJ Symbol Stamp                                               NIA Name                           AuthorIzation No.                                                   NlA Plant Vogtle                          ExpIration Oats                                                      NIA Address
Hydrostatic D PneumaticD Nominal Operating PressureD Other D Pressure psi Test Temp______ oF 9
: 4. Identification of System                                                    1301 I Main Steam
_ _______
: 6.   (a) Applicable Construction Code               ASME Sec. til        Edition,               1977                   Addenda, ____'-"N..:;. O___
___Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NlA NlA rintendant Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspect i on and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period I /i (oi l "] to (1/1! /1 :3 , and state that to the best of my knowledge and belief , the Owner has performed exam i nations and taken corrective measures described In this Owner's Report in accordance w i th the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore , neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspect i on. C I' p""e""c..,.to-r'..,.S-=S:-lg-n::.a-:-tu-r-e--------
(b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2"'0c::.01....... ed,.,.....20=03=-=add.....,.'--___
omm sSlons National Board, State, Province and Endorsements Date 1\ -:}uf\e ZCt 3 
(e) Applicable Section XI Code Case(s)
----------ORIGINFORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #
: 6. Identification Of Components National                                                                   Corrected,   ASMECode Name Component 0'              Name of Manufacturer Manufacturer Serial No.
____ Owner Southern Nuclear Operating Company Date May 28 , 40 Inverness Center Parkway, Birmingham , AL Sheet of Address Plant Vogl/e Electric Generating Plant Unit Waynesboro, GA SNC376584 RepalrlReplacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp Name Authorization No. Plant ExplraUon Date NlA Address 4. Identification of 1301/Main Steam System 5. (a) Applicable Construction ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Sect/on XI Used for RepalrlReplacement Activity _""2""O""Oc.:.1,."e",,d,,-
Board No.
...20""O",,3<.,:a,.,d,.,d
Other Identification Year Built Removed, or Installed Stamped (Yes or No)
...___ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 312008131024 NlA V2-1301-109-H002 NlA INSTALLED PIPE ANCHOR DARLING 697 NlA V2-1301-109-H002 1989 REMOVED Description of Work AD-73 snubber serial nO.697 was replaced by Usega serial number 312008131024 to support 2R16's augmented test scope. Test Conducted:
VALVE              ROCKWELL              OG-06            NIA            2HV3036B                              NlA               CORRECTED        YES INTERNA TlONAL
Hydrostatic D PneumaticD Nominal Operating PressureD Other D Pressure psi Test Temp. Remarks
: 7. Description of Work Replaoo Gate on 2HV30368
____________
: 8. Test Conducted:                   Hydrostatic 0    pneumaticO Nominal Operating Pressure[Rj                                      Exempt  0 Other 0    Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ oF
____
: 9. Remarks ~S~~~I~w~u~/7~___________~~~~~--~.~~~~~--~--~~~~~--------------------
_______________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE Of COMPLIANCE I certify that the statements made in the report are correct and that this confonns to the requirements of the ASME Code, Section XI .
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp NlA _______.;..N1.::..;I4..:-
Type Code Symbol Stamp                                                                      NlA Certifi~o.                                              /IVA                  Expiration Date                                                  NlA Signed      ~~1l.1'Ut4. 4>e..;                              Superintendent      Date         lr/1' 2{) j"$
_______ Expiration NlA /Date -5/a:r/ /3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford Connecticut have Inspected the components described in this Owner's Report during the period 01/1(,,/13 to 0(', 1 10/ 13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection. Commissions A gona oar, e, rovmce an n orsemen Date IC::s" v/le-ZO 13 
Owner or Owner's Designee, Tltie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission i&sued by the National Board of Boller and Pressure Vessel Inspectors and the atste or Province of             Georgia       and employed by         Hartford Swam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period '2. / i"l / l -S to       Q/I')/13            , and state that to the best of my knowledge and belief, thit Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the AS.ME Code, Sectlon XI.
By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impl~d, concerning the examinations and corrective measures described In this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
_ _ _-'o      ~_  ?---"
                    " /~~-=_-:--_. _ _ _ _
_7                                      Commissions    ~:-:-:-:-,f_:.~A::-<-S-,-:.;.:::3:-:-,,"
                                                                                                      * ~          * --::---::--_-:-=-:-_ _-:--_ _
7tOSPe6tor'a Signature                                                National Board, State, Province and Endorsements Date   La/h ! i :3


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #I
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tra veler # --'1..;.3..;.0.;,.53-=----_ _ _ __
____ Owner Southern Nuclear Operating Company Date May 10, 40 Inverness Center Parkway, Birmingham.
: 1. Owner       Southern Nuclear Operating Company                               Date                                             May 2. 2013 Name 40 Inverness Center Parkway. Birmingham. AL                       Sheet                                                 of Address
AL Sheet of Address . 2Plant Vogtle Electric Generating Plant Unit GA 30830 SNC376585 Address RepairlReplacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Dee!:!.rtment Type Code Symbol Stamp Name AuthOrization No. Plant VOfl.tle expiration Date NlA Address 4. Identification of 13011 Main Steam 5. (a) Applicable Construction ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2""O,!<01.:..=ed""....., 2""O"'Q""3.,.a".dd
: 2. Plant        Vogtle Electric Generating Plant                                 Unit                                                 2 Name Waynesboro. GA 30B30                                                                                          SNC470969 Address                                               Repair/Replacement Organization P.O. No., Job No., etc.
"".'--__ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components Nat i onal Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE LlSEGA 312008131029 NJA V2-1301-"'-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 695 NJA V2-'301-'1'-H002 1989 REMOVED Description of Work AD-73 snubber serial no.695 was replaced Lisega 301856CR7 serial number 312008131029 to support 2R16's aUfl.mented test scope. Test Conducted:
: 3. Work Performed by             Maintenance Deeartment                          Type Code Symbol Stamp                                         NIA Name                                   Authorization No.                                             N/A Plant Vogtle                                  Expiration Date                                               NlA Address
Hydrostatic 0 PneumatlcD Nominal Operating PressureD Other D Pressure ____psi Test Temp. ______ Remarks
: 4. Identification of System                                                                      120B / CVCS
_______Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NJA Certificate of NJA Expiration Date NJA Signed Superintendent Date nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Stlism Boillir Inspection and Insurenr;e Co. of Connecticut of Hartford:
: 5.   (a) Applicable Construction Code                ASME Sec. 11/                Edition,                     1974            Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _..::2""'OO><.1'-e::.:d.:....~2""QO""3~ad~d.:...._ _ _
Connecticut have inspected the components described in this Owner's Report during the period I liC" /I]? to 213 ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or B loss of any kind arising from or connected with this Inspection.
(c) Applicable Section XI Code Case(s)
__::::
: 6. Identification Of Components National                                                        Corrected,                         ASME Code Name of             Name of           Manufacturer                   Board             Other                             Year       Removed, or                         Stamped Component           Manufacturer           Serial No.                   No.       Identification                         Built       Installed                         (Yes or No)
Commissions
CHECK VALVE        WESTINGHOUSE          03001 CSBBOOOO                  NIA      2* 120B*U6*03B                          NIA      CORRECTED                              YES 0000
_,.,.-G-
: 7. Description of Work     Weld encapsulation cap on check valve
___
: 8. Test Conducted:                   Hydrostatic 0         PneumatlcD Nominal Operating Pressurn[Rj                                  ExemptD Other 0    Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
National Board, State, Province and Endorsements Date Ilj Jf\.P ZQ \3 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #
: 9. Remarks      _S~ee~lt~em~7~ ______         ___~~~~~_~____~~__~ ____~___~~ ______________
_____ Owner Southern Nuclear Operating Company Date June 11, 40 Invemess Center Parkway. Birmingham, AL Sheet of Address Plant Vogtle Electric Generating Plant Unit GA 30830 SNC446714 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Perfonned by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant Expiration Date NIA Address 4. Identification of 1301 I Main Steam 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-" 2'-"O.:.01..:....::.ed
Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
"'.'-'2...(c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) VALVE ROCKWELL 00-63 NlA 2HV3016A NlA CORRECTED YES /NTERNA TIONAL 7. Description of Work Replace Gate on 2HV3016A Test Conducted:
Type Code Symbol Stamp                                                                                    NI A
Hydrostatic 0 PneumatlcD Nominal Operating Pressure[R] Other 0 Pressure psi Test Temp. ______ 9. Remarks
                                    /"J-_..".-_ _ _-:N..;;,V.,:..;I'I:....._ _ _ _ _ _ Expiration Date                                            NIA Signed                                                                                      Date              5 *.,j'j"- { .3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of             Georgia       and employed by                 Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, ConnectiC(jf have Inspected the components described In this Owner's Report during the period Q 3 / 1 "S /1 ;:,
__________
to 0(,,/0</ / [ ~        ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reqUirements of the ASME Code, Section XI.
__
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
______________________
            ~~
__ Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA NIA-hlf-llf----..:..N!,:.:}:\-'--------
7  Inspector's Signature Commissions   _-:-:-":-(.""~,'-"A':-::--'~'_3"7-:Z~7__:__=_~:__-___:"'=_:__--_:__--
Expiration Date Signe uperintendent Date 6'/dO IoV13 CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Geomle and employed by Hartford Steam Boiler Ins!)8ction and Insurance Co. of Connecticut of Hartford.
National Board, State, Province and Endorsements Date  0 '1 ::fUM LC I 3
Connecticut have inspected the components described in this Owner's Report during the period .3/1'\ / J to c;. /'2-$'11 J. . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty.
 
expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer Shill' be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection. Commissions /" Inspector's National Board, State, Province and Endorsements Date z..s -:J\/.'\*.. 2 D I ----------_..---
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME C~de Section XI Traveler # -.:.1;::.30:.,:5:..;.7_ _ _ __
ORIGINAL--FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler it ---'1-=3..:.0-=.38
: 1. Owner            Southern Nuclear Operating Company                                          Date                                                    June 11, 2013 Name 40 Inverness Center Pa.rkway, Birmingham, AL                                Sheet                                    1.                        of Address
.:......_____ Owner Southern Nuclear Opera ling Company Date May I , 40 Inverness Center Parkway , Birmingham, AL Sheet of Address Plant Vogtle Electric Generating Plant Unit Waynesboro, GA SNC446715 RepalrlReplacement Organization P.O. No., Job No., etc. 3Work Performed by Maintenance Dee.artment Type Code Symbol Stamp N IName Authorization No. N IPlant Expiralion Dale NlA Address 4. Identification of 1301 I Main Steam 5. (a) Applicable Construction ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
: 2. Plant              Vogtle Electric Generating Plant                                            Unit                                                                2 Name Waynesboro, GA 30830                                                                                                          SNC456322 Address                                        RepairlReplacement Organization P.O. No., Job No., etc.
__(c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) VALVE ROCKWELL OE-78 N I A 2HV3026A NIA CORRECTED YES INTERNA TJONAL 7. Description of Work Rep/ace Gate on 2HV3026A Test Conducted:
: 3. Work Performed by                                  MaintenanC8 Department                    Type Code Symbol Stamp                                                          NIA Name                        Authorization No.                                                               NlA Plant Vogtle                            Explnrtlon Date                                                                NIA Address
Hydrostatic 0 PneumaticD Nominal Operating Pressure[R] Other D Pressure _____psl Test Temp. ______ Remarks _______
: 4. Identification of System                                                                      1201/ Reactor Coolant System
_____________
: 5.   (a) Applicable Construction Code                                         ASME Sec. 1/1      Edition,                     1971                  Acldiinda, W 1972 add.
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol N I A H+-_---:;o..--
(b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _..!2:!!O~O.1..1.xed~.~2~OO=3..ea~dd~.,-__
__N_Y A _______Expiration NIA Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BOiler Insoection and tnsurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3 I 3 to CXr ,-0'-1 -\:, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
(c) Applicable Section XI Code Case(s)
Commissions ii1;pector's National Board, State, Province and Endorsements  
: 6. Identification Of Components National                                                                        Correeted,                    ASMECode Name of                     Name of                                Manufacturer    Board                Other                              Year                Removed, or                        Stamped Component                  Manufacturer                                Serial No.       No.           Identification                            Built                    Installed                    (Yes or No)
.-Date OL(JUf\&#xa2;., -; 0 /,3, I 
PUMP                WESTINGHOUSE                                4-9744D35G01      NlA            21201P6002                                NlA                CORRECTED                              YES
: 7. Description of Work Replace the Rep S1381 par;kaga.
: 8. Test Conducted:                                           Hydrostatic    0    PneumaticO      Nominal Operating Pressure~                                        Exempt        0 Other    0    Pressure              psi Test Temp. _ _ _ _ _ "1=
: 9. Remali!s -'S::,:OO=.,:/.:.:te::..:m.:....:....7_ _ _ _ _ _ _-::--::--:-.,..--::::---::---:_
Applicable Manufacturers-Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                                                    NlA Certlflcata of Authorization No.                                                  NlA                  Expiration Date                                                            NlA Signed                            \r. t ~L\Jk\
Owner ori>Wner's Designee, T tie
                                                                                ~    Superintendent        Date                  ~ ) \ \ h~
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                                      Georgia          and employed by      Hartford Steam Boiler /nsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components de$crlbed In this Owner's Report during the period -z../C:G::'/; :3 to    (&#xa3;/I'l/i ">                , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measul'&s described In this Owner's Report in accordance with the requirements of the ASME Code, Sectlon XI.
By signing this certlflcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.
----'~'-;    .""> ~""v-~-.-pec
                            ...~""~to'--r'-S  *-=s-Ig....;;n-a-tu-I'&-*- - - -        Commissions    --;-N:-at-::lona-,"b"':;:.::,I:'-Oa--J..J.rd7':"'.:s~~":te-,-:p::-ro~vi:-nce--a-nd-:-::E:-nd"';'o-rs-em-e-nts:-----
 
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=,3,:..060::..::..._ _ _ __
: 1. Owner         Southem Nuclear Operating Company                          Date                                            June OS, 2013 Name 40 Invemess Center Parkway, Binningham, AL                Sheet                                                      of Address
: 2. Plant        Vogl/e Electric Generating Plant                            Un~                                                      2 Name Waynesboro, GA 30830                                                                              SNC376568 Address                                        RepairfReplacement Organization P.O. No., Job No., etc.
3,  Work Performed by              Maintenance Department                    Type Code Symbol Stamp                                            N/A Name                              AuthOrization No.                                                N/A Plant Vogtle                              Expiration Date                                                  NIA Address
: 4. Identification of System                                                  1201 - Reactor Coo/ant System
: 6.  (a) Applicable Construction Code                ASME Sec. III            Edition,          1977                Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrfReplacement Activity _....:2"'O""01.:....:,ed"".""2""O""O""3.::.a;::;dd"".'--__
(c) Applicable Section XI Code Case(s) N-249-1
: 6. Identification Of Components National                                                                Corrected,                      ASME Code Name of              Name of          Manufacturer          Board              Other                    Year                    Removed, or                        Stamped Component            Manufacturer          Serial No.            No.          Identification                Built                      Installed                      (Yes or No)
PIPE            PAUL MONROE                913                NlA      V2-1201-86-002-S006                1989                    CORRECTED                            YES SUPPORT
: 7. Description of Work Replace control valves on snubber
: 8. Test Conducted:                  Hydrostatic  0        PneumatlcD Nominal Operating PressureD                                    Exempt[!J Other D    Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks      _S~e~e~lte~m_7_________~__~~~~~________~=-                                    _____~__~_~___________________
Applicable Manufacwrer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
(l."-&      Type Code Symbol Stamp                                                                        NlA O "-'oSJ\\
N/,'1'1A                      . I Explrat on ateO N . "/1'1A Signed
                      \"."
rintendenl      Date        6 -9            -O?Qr~
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of              Georgia        and employed by          Hartford Steam Boifer Inspection and Insurance Co. of Connecticut of Hf!l!;0rd Connecticut have inspected the components described in this Owner's Report during the period 03./Q7/1 ~
to    _/11713              , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection .
                                  . --?~-
            ------c,...~:;;;;.<~~--.,...~c:;..::==_--=----------              Commissions Z~r'S Signature                                                          National Board, State, Province and Endorsements Date    II 10{\".2013
 
ORIGIN FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --clc..::3c.::0..:.6.::.3_ _ _ __
~                  1. Owner        Southern Nuclear Operating Company                  Date                                                    May 2, 2013 Name 40 Inverness Center Parkway, Birmingham, AL          Sheet                                                          of Address
: 2. Plant        Vogtle Electric Generating Plant                      Unit                                                          2 Name Waynesboro, GA 30830                                                                              SNC470B63 Address                                  Repair/Replacement Organization P.O. No., Job No., etc.
: 3. Work Performed by            Maintenance Dee.artment              Type Code Symbol Stamp                                                  NIA Name                        Authorization No.                                                      NlA Plant Voqtle                        Expiration Date                                                      NlA Address
: 4. Identification of System                                                        120B/CVCS
: 5.    (a) Applicable Construction Code                  ASME Sec. Iff    Edition,                  1974                Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...,2",OO.::<..!..1-"e""d,-,.2..,O",O",3,->a""d""d",._ _
(c) Applicable Section XI Code Case(s)
: 6. Identification Of Components National                                                                  Corrected,                        ASME Code Name of                Name of          Manufacturer      Board            Other                              Year                Removed, or                          Stamped Component              Manufacturer          Serial No.        No.        Identification                        Built                  Installed                        (Yes or No)
CHECK VALVE          WESTINGHOUSE        03001 CS880000        NIA        2* 120B*U6-036                          NIA                CORRECTED                              YES OOOOS74-0036
: 7. Description of Work Weld encae.sulation cae. on check valve
: 8. Test Conducted:                  Hydrostatic  0    PneumaticD Nominal Operating PressureOO                                      ExemptD Other D      Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks _S.::.ee~~/t~em~7_ _ _ _ _ _ _ _~~~~~_~~_~~_~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ ___
Applicabie Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                        N/A Certificate (\'      '              AI----,,_----.:..N.;;;yA;.;....------ Expiration Date                                                    N/A Signed                                                                          Date                5/1/13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of              Georgia        and employed by    Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3./,-;,,113 to o(p/C~I/ i 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
                              ~~- .-.------.-                                  Commissions _ _      -,=:-:::;:A.:..
                                                                                                      ~ fI--'--(..l.}-,3,,----,,'i{,-- _ _,--_ _ _ _ _ _ _ _ __
7 '      Inspector's Signature                                        National Board, State, Province and Endorsements Date    0 4:S LHI{?, zC 13
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--'1.c:3.c:0,;:.64.;...._ _ _ __
  ~      1. Owner        Southern Nuclear Operating Company                      Date                                              May 2,2013 Name 40 Invemess Center Parkway, Birmingham, AL              Sheet                                                    of Address
: 2. Plant        VogtJe Electric Generating Plant                        Unit                                                    2 Name Waynesboro, GA 30B30                                                                        SNC470599 Address                                    RepalrlReplacement Organization P.O. No., Job No., etc.
: 3. Work Performed by            Maintenance Department                  Type Code Symbol Stamp                                          N/A Name                            Authorizalion No.                                              NIA Plant Vog,tJe                          Expiration Dale                                                NIA Address
: 4. Identification of System                                                          120B/CVCS
: 5.  (a) Applicable Construction Code                ASME Sec. III        Edition,          1974              Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _""2""OO=."1....:e""d""...:2""OO=3,.,,a"'d"'d"'-._ _ _
(c) Applicable Section XI Code Case(s)
: 6. Identification Of Components National                                                            Corrected,                      ASME Code Name of              Name of          Manufacturer          Board            Other                    Year                  Removed, or                        Stamped Component          Manufacturer            Serial No.          No.        Identification              Built                    Installed                      (Yes or NO)
CHECK VALVE          WESTINGHOUSE          03001 CSBBOOOO          NIA        2-1208 -U6-035                  NIA                  CORRECTED                            YES 0000S74-0035
: 7. Descrlptlon of Work      Weld encapsulation cap on check valve
: 8. Test Conducted:                  Hydrostatic  0        PneumatlcD Nominal Operating PressureOO                              Exempt    0 Other  0    Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks ~S~e~e~/~re~m~7__________~_~77~~~_ _ _~~~~_ _~_~~_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the reqUirements of the ASME Code, Section XI.
Ie"" \~
    \
Type Code Symbol Stamp                                                                    NlA 1,\"                                        /-zIl-_____-'-Nl..:..:...;A_ _ _ _ _ _ Expiration Date                                                NlA Date          5f9/B CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of              GeorQia      and employed by        Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ~J~--,(..                                        *3... _-,-1.::::3'---:---:-_1 to    <0-1'8 -1:S        , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection.
r Date
                    /~~-
Inspector's Signature cell ~ /2t? i 3 Commissions National Board, State, Province and Endorsements
 
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_3_0.;;,.66'-_ _ _ __
: 1. Owner        Southern Nuclear Operating Company                          Date                                          June 17, 2013 Name 40 Inverness Center Parkway, Birmingham, AL                  Sheet                                                of Address
: 2. Plant        Vagtie Electric Generating Plant                              Unit                                                2 Name Waynesboro, GA 30830                                                                                    SNC343656 Address                                            Repair/Replacement Organization P.O. No., Job No., etc.
: 3. Work Performed by              Maintenance Department                      Type Code Symbol Stamp                                      NIA Name                              Authorization No.                                          NIA Plant VogUe                                Expiration Date                                            NIA Address
: 4. Identification of System                                                                    120B/CVCS
: 5.  (a) APplicable Construction Code                    ASME Sec. III        Edition,                    1974            Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2~O~O~1....:!e~d~. .!:2~O~O)!.3~a~d~d.!-._ _ _
(c) APplicable Section XI Code Case(s)
: 6. Identification Of Com ponents National                                                        Corrected,            ASME Code Name of              Name of            Manufacturer            Board              Other                            Year      Removed, or              Stamped Component            Manufacturer            Serial No.            No.          Identification                        Built        Installed              (Yes or No)
CHECK VALVE        WESTINGHOUSE          03001 CS8BOOOO              NlA        2-1208-U6-037                          NlA      CORRECTED                  YES 0000574-0034
: 7. Description of Work      Replace components on check valve.
: 8. Test Conducted:                  Hydrostatic      D    PneumaticD        Nominal Operating PressureOO                        ExemptD Other D          Pressure                psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks      _S~ee~lt~em~7_ ________~~~~~_~ _ _~~_~ ____~~__~~ _________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol 5t                                                                                  N/A H'+ift---,r-_--'-N:;..;VA..:...._________ Expi ration Date                                              NlA Signe                                                            ,Superintendent        Date 6'/020 l~13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of            Georgia            and employed by        Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart10rd~COnnecticut have inspected the components described in this Owner's Report during the period Q1/"1 / (~
to WZ.<p~13                , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
        ~/~                                                        Commissions    _-"t=~,,:,-' !l-'--~()-:-:s=-'75_,..--____-:-___:_::__:_-----
      ~ Inspector's Signature                                                          National Board, State, Province and Endorsements
 
ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --,1..::3.::.06;::7~ _ _ __
: 1.      Owner            Sou/hem Nuclear Operating Company                                  Date                                May 7, 2013 Name 40 Invemess Center Parkway, Birmingham, AL                          Sheet                                    of                        1 Address
: 2.      Plant            Vogtle Electric Generating Plant                                    Unit                                    2 Name Waynesboro, GA 30830                                                                              SNC472922 Address                                          Repair/Replacement Organization P.O. No., Job No., etc.
: 3.      Work Performed by                        Maintenance Department                        Type Code Symbol Stamp                            NIA Name                                Authorization No.                                NIA Plant VogUe                                  Explratlon Date                                  NIA Address
: 4.      Identification of System                                                        1305 / Condensate and Feedwater Syst9m
: 5.      (a) Applicable Construction Code                              ASME Sec. 11/          Edition,          1974        Addenda, Summer 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2",O",OC!.1.."e",dc:...'.20",O,.,3,-,a",d",d~
(c) Applicable Section XI Code Case(s)
: 6.      Identification Of Components National                                                  Corrected,                ASMECode Name of                        Name of                Manufacturer          Board                Other                Year        Removed, or                    Stamped Component                    Manufacturer                  Serial No.            No.            Identification          Built          Installed                  (Yes or No)
CHECK VALVE ANCHOR DARLING                                  E9001-97-8            NlA            2-1305-U4-077              NlA        CORRECTED                        YES
: 7.      Description of Work Replac9 hinge pin stud cover and nut
: 8.      Test Conducted:                              Hydrostatic    0    PneumaticD          Nominal Operating PressureD              Exempt[Rj Other D        Pressure                          Test Temp. _ _ _ _ _ _ oF
                                                                                    - - - - psi
: 9.      Remarks _S;::e~e~/~re~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~_ _ _ _ _ _ _ _ _ __
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol                S)/if                                                                          NlA Certificate      0
* I    r[,f7n-.,.......,~-_---'N!...:.;..;:4~- _ _ _ _ Expiration Date                                    NlA Signe        1-/                '                                                    rintendent    . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                            Georgia          and employed by            Hartford Steam Boiler Inspection and Insurance Co. of Confl6Cticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period Q 3./H I ( -:)
to Q::,-/;"o/; 3.                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
                /"~~----
      ~
---,s,-:&~:.c:_::--:7'.z".z.z,-",,~::...-~-:-
                                          ~-::-:-_~_ _ _ _ _ _ _ Commissions
          -  ~          Inspector's Signature                                                        National Board, State, Province and Endorsements Date     30Mo-j 2013


FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..........;
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---o1,.:c3.:..06;:.;8:..-_ _ __
1..:;3.,:.04
--... 1. Owner              Southern Nuclear Operating Company                                                       Date                                           May 9,2013 Name 40 Inverness Center Parkway, Birmingham, AL                                              Sheet                                               of Address
.;..0'--____ 1Owner Southern Nuclear Operating Company Date May 1 , 40 Inverness Center Parkway, Birmingham , Sheet 1 of Address Plant Vogtle Electric Generating Plant Unit GA 30830 SNC446717 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp Name AuthorlzaUon No. Plant Vogfle Expiration Date N/A Address 4. Identification of 1301 I Main Steam 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2",O",-01.!...!Ced",.(c) Applicable Section Xl Code Case(s) 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) VALVE ROCKWELL OC-11 NIA 2HV3006B NlA CORRECTED YES INTERNA T10NAL 7. Description of Work Replace Gate on 2HV3006B Test Conducted: Hydrostatic D PneumaticD Nominal Operating pressure[!] Other 0 Pressure psi Test ______ *F 9.
: 2. Plant               Vogt/e Electric Generating Plant                                                         Unit                                                 2 Name Waynesboro, GA 30830                                                                                                             SNC469288 Address                                                       RepalrlReplacement Organization P.O. No., Job No., etc.
_______Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. N/A NlA+/--hH-....c;,;:c--.;...:;.;-'-------
3,  Work Performed by _ _;.;,M;.::a;.;,in;;.;te:.;,n:..::a""n=.;ce::..::;Da""pc8:.:.rt.::,m:;.;e:.;,n;.;,t__    Type Code Symbol Stamp                                         N/A Name                                     Authorization No.                                             N/A Plant VogUe                                              Expiration Date _ _ _ _ _ _ _ _ _ _ _N._VA                      _ _ _ _ _ __
Expiration Date Signed Date$/df/13 CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford.
Address
Conneciicut have inspected the components described in this Owner's Report during the period Q 3/ 1"1 / I;' to OG (/0/1 3 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken cOl'Tective meaSures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectlon.
: 4. Identification of System                                                                                                  120B/CVCS 5,  (a) Applicable Construction Code                                                 ASME Sec. 11/             Edition,                 1971              Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _..:2"'O""01..:....>:.ed"'.""2""O""O=.3""a""dd"'.'--__
___
(c) Applicable Section XI Code Case(s) 6,  Identification AOf Components National                                                       Corrected,                     ASME Code Name of                     Name of                             Manufacturer                           Board         Other                       Year           Removed, or                       Stamped Component                 Manufacturer                               Serial No.                           No. Identification                     Built           Installed                       (Yes or No)
_______ Inspector's National Board, State, Province and Endorsements Date i (' "0 i wi? 20 13
VALVE                       FISHER                                    9318722                            NlA       2FV0121                        1985          CORRECTED                           YES CONTROLS
_____ ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY Ae Required By The Provisions Of The ASME Code Section XI
: 7. Description of Work Replace valve stem / plug assembly
________ Owner Southern Nuclear Operuting Company Date June 11 , 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of 1 Address 2Plant VogtJe Electric Generating Plant Un i t Waynesboro , GA 30830 SNC446720 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Perfonned by Ma i ntenanoo Department Type CO<kJ Symbol Stamp N IName AuthorIzation No. Plant ExpIration Oats NIA Address 4. Identification of 1301 I Main Steam 6. (a) Applicable Construction Code ASME Sec. til Edition, 1977 Addenda, ____'-"N..:;..O
: 8. Test Conducted:                                         Hydrostatic             0      PneumaticD Nominal Operating PressureD                                    Exempt    00 Other D                Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
___ (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ .... ....... 20=03=-=add.....,.'--
: 9. Remarks ~S.:..ea~/:.::te:.:.m~7_ _ _ _ _ _ _~_~~~~~~__~~-~--~~-~~------------
__2"'0c::.01 ed,.,..... (e) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASMECode Name 0' Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Se r ial No. No. Identification Built Installed (Yes or No) VALVE ROCKWELL OG-06 NIA 2HV3036B NlA CORRECTED YES INTERNA TlONAL 7. Description of Work Replaoo Gate on 2HV30368 8Test Conducted:
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Hydrostatic 0 pneumaticO Nom i nal Operating Pressure[Rj ExemptOther 0 Pressure ____psi Test Temp. 9. Remarks
Type Code Symbol Stamp                                                                                                              N1A
___________Applicable Manufacturer's Data Reports to be attached CERTIFICATE Of COMPLIANCE I certify that the statements made in the report are correct and that this confonns to the requirements of the ASME Code, Section XI . Type Code Symbol NlA Expiration NlA
                                                              ,W*_-,-_ _..;..N!..;;.;~.-_ _ _ _ _ _ Expiration Date                                                                   NlA Date           c'i  Idc:L/d) 0 1.3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                                   Georgia                   and employed by             Hartford Steam BoNer Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 03 ' 1:S to 0<9 **0 2-* 13 , and state that to the best of my knowledge and belief, the OWner has performed examinations and taken cOrl'9Ctive measures described in this OWner's Report in accordance with the requirements of the ASME Code, Section XI.
/IVA Signed 4>e..; Superintendent Date lr/1' 2{) j"$ Owner or Owner's Designee, Tltie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission i&sued by the National Board of Boller and Pressure Vessel Inspectors and the atste or Province of Georgia and employed by Hartford Swam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period '2./ i"l / l -S to Q/I')/13 , and state that to the best of my knowledge and belief , thit Owner has performed examinations and taken correct i ve measures described In this Owner's Report In accordance with the requirements of the AS.ME Code, Sectlon XI. By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or concerning the examinations and corrective measures described In this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.
By signing this certificate neither the Inspe*ctor nor his employer makes any warranty, expressed or implied, concemlng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this InspecUon.
___7
      --c2~_;,.,
____ Commissions --::---::--_-:-=-:-
7/   . ~_.~-,/-n**s-~:rl"S
-:--_____7tOSPe6tor'a National Board, State, Province and Endorsements La/h ! i:3 Date 
:.; ;.~-c:-=-: ~  -
ct...o" -:r'/:. s7-: *s,.,.ig-n-a. .;t- - - - u: :re~----
                                                                                          -                  Commissions _.,..,...~{-_~"".,-1f~_&deg;..L7-,:~\L.S<'.u.,=---:-__
National Board, State, Province and Endorsements
                                                                                                                                                                                -:--=-:-_ _-:-_ __
Date n 7 ::s \lAc::. 70 (-S


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI T ra v eler # --'1..;.3..;.0.;,.53-=----
ORIGINAL
_____ Owner Southern Nuclear Op e rating Company Date May 2. 40 In v erness Center Parkw a y. Birmingham.
  ----.                                    FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:.3.:..0_74_ _ _ __
AL Sheet of Address Plant Vogtle Electri c Generating Plant Unit Wayne s boro. GA SNC470969 Repair/Replacement Organization P.O. No., Job No., etc. 3Work Performed by M a inten a n c e Deeartm e nt Type Code Symbol Stamp Name Authorization No. N/Plant Expiration Date Nl A Address 4. Identification of 120B / C VCS 5. (a) Applicable Construction ASME Sec. 11/ Edition, 1974 Addenda , Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
: 1. Owner                  . Sauthern Nuclear Operating Company                                 Date                                   May 28. 2013 Name 40 Inverness Center Parkway, Birmingham, AL                         Sheet                                         of Address
__ _ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) CHECK VALVE WESTINGHOUSE 0 3001 CSBBOOOO N I A 2* 120B*U6*03B N I A CORRECTED 0 07. Description of Work Weld en c apsulation cap on c heck valve Test Conducted:
: 2. Plant                     Vogtle Electric Generating Plant                                     U~t                                          2 Name Waynesboro, GA 30830                                                                                  SNC135383 Address                                    RepairlReplacement Organization P.O. No., Job No., etc.
Hydrostatic 0 PneumatlcD Nominal Operating Pressurn[Rj Other 0 Pressure _____psi Test Temp. ______ 9Remarks
: 3. Work Perfonned by                                     Maintenance Depertment                  Type Code Symbol Stamp                               NIA Name                           Authorization No.                                   NlA Plant VogtJe                          expiration Date                                     NlA Address
______ ___
: 4. Identification of System                                                                        12011 Reactor Coolant System
__________________________
: 5.   (a) Applicable Construction Code                                          ASME Sec. /JI        Edition,               1971        Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repalr/Replacement Activity _-=2",O",-01.:..=,ed""...,2:.::0",O""3..::a",d",,d:..._ _
_ Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol N I A /"J-_..".-
(c) Applic.able Section XI Code Case(s): 1484-3, 1528*3. and N-474-1
___-:N..;;, V,.:..;I'I:.....
: 6. Identification Of Components National                                                   Corrected,             ASME Code Name of                                   Name of                 Manufacturer     Board                 Other                 Year       Removed, or               Stamped Component                                 Manufacturer                 Serial No.       No.           Identification               Built         Installed             (Yes or No)
______Expiration N I A Date 5 *.,j'j"-{.3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission i ssued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Ge or gia and employed by Hartford Steam B o il e r Ins p ection and Insur a n ce Co. of Connecti c ut of Hartford, Conne c ti C (jf have Inspected the components described I n this Owner's Report during the period Q 3 /1 "S /1 ;:, to 0(,,/0</ / [ ,and state that to the best of my knowledge and belief , the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reqUirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty , expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be l i able in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
S TEAM                        WESTINGHOUSE                         GBGT*1982        NlA          2*1201*86-003                1982        CORRECTED                   YES GENERATOR
Commissions 7 Inspector's Signa tNational Board, State, Province and Endorsements Date 0 '1 ::f U M LC I 3 
: 7. Description of Work Install mechanical tube plugs in tube location R56*C82 (Hot and Cold Leg Side)
: 8. Test Conducted:                                           Hydrostatic 0   PneumaticD      Nominal Operating PressureD                  ExemptOO Other D      Pressure               psi Test Temp.
                                                                                                                                            ------ OF
: 9. Remarks ~S~ee~~/re~m~7______________~~~~~__~~~~~~~~~~__~~~_______________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
  !l.      Type Code Symbol Stamp                                                                                                    NlA
~<;>#                                                                                                                                                                NIA ol,~                                                                    rY----,_----Nl.-;I\---------- Expiration Date Signed                                                                                      rintendent        Date           5/;2Rf ~3 CERTIFICATE OF INSERVICE INSPECTiON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                                         Georgia      and employed by       HfJrtfSl1'SL s.mam Boiler InsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components desCribed in this Owner's Report during the period 0':)/1<\ / I :>
to      rxRlwl 1';'                              , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctIve measures described in this Owner's Report. Furthennore, neither the Inspector nor hIs employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
_---<?::;..".
                      .~
                          -:-.r/.;...,-.....?
                                            ~'"'<:::....-~-:--:--:----:_:__.,:_
                                                  ~                          - ._______              Commissions 7" '~tor's Signature                                                                                    National Board, State, Province and Endorsements Date     ( C:S';/if Z/) 13 i
\~


FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Section XI Traveler # -.:.1;::.30:.,:5:..;.7
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ........;1..:.3.;;.0'-'75=--_ _ __
_____ Owner Southern Nuclear Operating Company Date June 11, 40 Inverness Center Pa.rkway, Birmingham, AL Sheet 1 . of Address Plant Vogtle Electric Generating Plant Unit GA 30830 SNC456322 Address RepairlReplacement Organization P.O. No., Job No., etc. Work Performed by MaintenanC8 Department Type Code Symbol Stamp Name Authorization No. Plant Explnrtlon Date NIA Address 4. Identification of 1201/ Reactor Coolant System 5. (a) Applicable Construction ASME Sec. 1/1 Edition, 1971 Acldiinda, W 1972 add. (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity
: 1. Owner       Southern Nuclear Operating Company                     Date                                                 May 28, 2013 Name 40 Inverness Center Parkway, Birmingham. AL             Sheet                                                       of Address
__ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Correeted, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PUMP WESTINGHOUSE 4-9744D35G01 NlA 21201P6002 NlA CORRECTED YES 7. Description of Work Replace the Rep S1381 par;kaga. Test Conducted:
: 2. Plant       Vogtle Electric Generating Plant                         Unit                                                       2 Name Waynesboro. GA 30830                                                                               SNC135383 Address                                   Repair/Replacement Organization P.O. No., Job No., etc.
Hydrostatic 0 PneumaticO Nominal Operating Exempt Other 0 Pressure psi Test Temp. _____ Remali!s -'S::,:OO=.,:/.:.:te::..:m.:....:....7
: 3. Work Performed by             Maintenance Dee.artment                Type Code Symbol Stamp                                               NlA Name                           Authorization No.                                                   NIA Plant Vog,tle                        Expiration Date                                                    NlA Address
_______
: 4. Identification 01 System                                              1201/ Reactor Coolant System
Applicable Manufacturers-Data Reports to be CERTIFICATE OF COMPUANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA Certlflcata of Authorization No. NlA Expiration NlA Signed \r. t Superintendent Date ) \ \ Owner ori>Wner's Designee, T tie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler /nsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components de$crlbed In this Owner's Report during the period -z../C:G::'/;
: 5.   (a) Applicable Construction Code                ASME Sec. 1/1       Edition,           1971                   Addenda, Summer 1972 (b) Applicable Edition 01 Section XI Used for Repair/Replacement Activity _-<2~O::::O:..!1-,e""d"".-"2:!,O::<O",3-"a."d",,d,-._ __
:3 to (&#xa3;/I'l/i "> , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measul'&s described In this Owner's Report in accordance with the requirements of the ASME Code, Sectlon XI. By signing this certlflcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.  
(c) Applicable Section XI Code Case(s): 1484-3. 1528-3. and N-474-1
... Commissions ORIGINFORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=,3,:..060::..::...
: 6. Identi1ication Of Components National                                                                  Corrected,                         ASME Code Name of              Name of            Menufacturer      Board              Other                        Year                    Removed, or                          Stamped Component            Manu1acturer            Serial No.       No.           Identification                  Built                    Installed                          (Yes or No)
_____ Owner Southem Nuclear Operating Company Date June OS, 40 Invemess Center Parkway, Binningham, AL Sheet of Address Plant Vogl/e Electric Generating Plant GA 30830 SNC376568 Address RepairfReplacement Organization P.O. No., Job No., etc. 3 , Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name AuthOrization No. N/A Plant Vogtle Expiration Date NIA Address 4. Identification of 1201 -Reactor Coo/ant System 6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrfReplacement Activity _....:2"'O""01.:....:,ed"".""2""O""O""3
STEAM          WESTlNGHOUSE            GBGT-1983          NIA          2-1201-B6-002                      1983                  CORRECTED                                YES GENERATOR
.::.a;::;dd"".'--
: 7. Description of Work lnstaJ/ mechanical tube e.lugs in tube location R15-C60 (Hot and Cold Leg Side)
__ (c) Applicable Section XI Code Case(s) N-249-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) PIPE PAUL MONROE 913 NlA V2-1201-86-002-S006 1989 CORRECTED YES SUPPORT 7. Description of Work Replace control valves on snubber Test Conducted:
: 8. Test Conducted:                  Hydrostatic  0    PneumaticD Nominal Operating PressureD                                      Exempt~
Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[!J Other D Pressure ____psi Test Temp. ______ oF 9. Remarks
Other D    Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
___________
: 9. Remarks _S~e~e~lt~em~7_ ___________~~~~~__~____~~~=-__~_~~~~~___________________
_________________________________
Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
_ Applicable Manufacwrer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. (l."-& Type Code Symbol NlA O N/,'A E . ION." A 1'1 xplrat on ate /1'1 rintendenl Date 6 -9
Type Code Symbol Stamp                                                                    NIA
\"." CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boifer Inspection and Insurance Co. of Connecticut of Hf!l!;0rd Connecticut have inspected the components described in this Owner's Report during the period 03./Q7/1 to _/11713 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection . .
't'\~                                        +Ai-_-=-_____N!.~;4"--_________ Expiration Date                                                          NIA rMt}\\~
Commissions Signature National Board, State, Province and Endorsements Date II 10{\".2013 
Signed                                                      Superintendent       Date     6'" -dO -&0 1:5 itle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of             Georgia       and employed by       Hartford Steam Boiler InSD8ction and insurance CD. of Connecticut .
.. -..... ..,.......... FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --clc..::3c.::0..:.6.::.3
of Ha/ford. Connecticut have inspected the components described in this Owner's Report during the period 3/B/} :5                                                                      .,
_____ Owner Southern Nuclear Operating Company Date May 2 , 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogtle Electric Generating Plant Unit Waynesboro , GA SNC470B63 Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp N IName Authorization No. Plant Expiration Date NlA Address 4. Identification of 120B/CVCS
to     Jz /1-5    /, '>   ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
: 5. (a) Applicable Construction ASME Sec. Iff Edition , 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...,2",OO.::<..!..1-"e""d,-,.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
2..,O",O",3,->a""d""d",.
Commissions            GA        93[
__ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) CHECK VALVE WESTINGHOUSE 03001 CS880000 N I A 2* 120B*U6-036 N I A CORRECTED OOOOS-" 7. Description of Work Weld encae.sulation cae. on check valve Test Conducted:
        ~~                                                                                National Board, State, Province and Endorsements Date      Z. S 'J,) ~e-lO      , :)
Hydrostatic 0 PneumaticD Nominal Operating PressureOO ______ Other D Pressure _____psi Test Temp. 9Remarks
________
_____________
__ Applicabie Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol N/A Certificate
(\' N/A AI----,,_----.:..N.;;;
y A;.;....------
Expiration Date Date ! 5/1/13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3./,-;,,1 13 to i 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection. Commissions
__
__,--__________
7 ' Inspector's National Board, State, Province and Endorsements Date 0 4:S L HI{?, zC 13 Ie"" \ 1,\"
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--'1.c:3.c:0,;:.64
.;...._____ Owner Southern Nuclear Operating Company Date May 40 Invemess Center Parkway, Birmingham, AL Sheet of Address Plant VogtJe Electric Generating Plant Unit Waynesboro, GA SNC470599 RepalrlReplacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp N/Name Authorizalion No. Plant Vog,tJe Expiration Dale NIA Address 4. Identification of 120B/CVCS
: 5. (a) Applicable Construction Code ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _""2""OO=."1....:e""d""...:2""OO=3,.,,a"'d"'d"'-.
_ _ _ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or NO) CHECK VALVE WESTINGHOUSE 03001 CSBBOOOO NIA 2-1208 -U6-035 NIA CORRECTED
: 7. Descrlptlon of Work Weld encapsulation cap on check valve Test Conducted:
Hydrostatic 0 PneumatlcD Nominal Operating PressureOO ExemptOther 0 Pressure _____psi Test Temp. ______ 9. Remarks
__________
_____________________
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made In the report are correct and that this conforms to the reqUirements of the Code, Section Type Code Symbol NlA /-zIl-_____-'-Nl..:..:...;A
______Expiration NlA Date 5f9/B CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of GeorQia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut *3 have inspected the components described in this Owner's Report during the period ....._-,-1.::::3'---:---:-_1 to <0-1'8 -1:S , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection.
r Inspector's Signature National Board, State, Province and Date cell/2t?i 3 
----
FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_3_0.;;,.66'-
_____ Owner Southern Nuclear Operating Company Date June 17, 40 Inverness Center Parkway , Birmingham , AL Sheet of Address Plant Vag tie Electric Generating Plant Unit Waynesboro, GA SNC343656 Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant VogUe Expiration Date NIA Address 4. Identification of 120B/CVCS
: 5. (a) APplicable Construction ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity
.
__ _ (c) APplicable Section XI Code Case(s) 6. Identification Of Com ponents National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) CHECK VALVE WESTINGHOUSE 03001 CS8BOOOO NlA 2-1208-U6-037 NlA CORRECTED YES 0000574-0034
: 7. Description of Work Replace components on check valve. 8Test Conducted:
Hydrostatic D PneumaticD Nominal Operating PressureOO ______ oOther D psi Test Temp. 9Remarks
_________
_______________________
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol N/A H'+ift---,r-_--'-N:;..;VA..:....
_________
Expi ration NlA , Superintendent Date 6'/020 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned , holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of have inspected the components described in this Owner's Report during the period to , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions
____-:-__Inspector's Signature National Board, State, Province and Endorsements 
----
FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #
____ Owner Sou/hem Nuclear Operating Company Date May 7, 40 Invemess Center Parkway, Birmingham , AL Sheet of 1 Address Plant Vogtle Electric Generating Plant Unit Waynesboro , GA SNC472922 Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. Plant VogUe Explratlon Date NIA Address 4. Identification of 1305 / Condensate and Feedwater Syst9m 5. (a) Applicable Construction ASME Sec. 11/ Edition, 1974 Addenda, Summer 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2",O",OC!.1.."e",dc:...'
... ___(c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) CHECK VALVE ANCHOR DARLING E9001-97-8 NlA 2-1305-U4-077 NlA CORRECTED YES 7. Description of Work Replac9 hinge pin stud cover and nut Test Conducted:
Hydrostatic 0 PneumaticD Nominal Operating PressureD Other D Pressure psi Test ______ oF Remarks
_______
_ __________ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol NlA Certificate 0
* I
____Expiration Signe 1-/ rintendent . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Confl6Cticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period Q 3./H I ( -:) to Q::,-/;"o/;
: 3. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
_______ Commissions-Inspector's National Board, State, Province and Endorsements Date 30Mo-j 2013 ORIGINAFORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---o1,.:c3.:..06;:.;8:..-
____ --... 1. Owner Southern Nuclear Operating Company Date May 9,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogt/e Electric Generating Plant Unit Waynesboro, GA SNC469288 RepalrlReplacement Organization P.O. No., Job No., etc. 3, Work Performed by __;.;,M;.::a;.;,in;;.;te:.;,n:..::a""n=.;ce::..::;Da""pc8:.:.rt.::,m:;.;e:.;,n;.;,t
__ Type Code Symbol Stamp N/A Name Authorization No. N/A Plant VogUe Expiration Date ___________
N._VA_______ Address 4. Identification of 120B/CVCS 5, (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _..:2"'O""01..:....>:.ed"'.""2""O""O=.3""a""dd"'.'--
__ (c) Applicable Section XI Code Case(s) 6, Identification A Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) VALVE FISHER 9318722 NlA 2FV0121 1985 CORRECTED YES CONTROLS 7. Description of Work Replace valve stem / plug assembly Test Conducted:
Hydrostatic 0 PneumaticD Nominal Operating PressureD ExemptOther D Pressure ____psi Test ______ oF Remarks
_______
__Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF I certify that the statements made in the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol N1A ,W*_-,-__
______Expiration NlA Date c'i Idc:L/d) 0 1.3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BoNer Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 03 '-19 -1:S to 0<9 **0 2-* 13 , and state that to the best of my knowledge and belief, the OWner has performed examinations and taken cOrl'9Ctive measures described in this OWner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspe*ctor nor his employer makes any warranty, expressed or implied, concemlng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this InspecUon. ..Commissions
__-:--=-:-__-:-___ 7/ National Board, State, Province and Endorsements Date n 7 ::s \lAc::. 70 (-S 
------ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY ----. ..!l.
As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:.3.:..0_74
_____ Owner . Sauthern Nuclear Operating Company Date Ma y 28. 40 Inverness Center Parkway, Birmingham, AL Sheet of Address Plant Vogtle Electric Generating Plant Waynesboro , GA 30830 SNC135383 Address RepairlReplacement Organization P.O. No., Job No., etc. Work Perfonned by Ma i ntenance Depertment Type Code Symbol Stamp Name Authorization No. Plant VogtJe expiration Date NlA Address 4. Identification of 12011 React o r Coolant System 5. (a) Applicable Construction ASME Sec. /JI Ed i tion, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repalr/Replacement Activity _-=2",O",-01.:..=,ed""...,2:.::0",O""3..::a",d",,d:...
__ (c) Applic.able Section XI Code Case(s): 1484-3, 1528*3. and N-474-1 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) S T EAM WESTINGHOUSE GBGT*1982 NlA 2*1201*86-003 1982 CORRECTED
: 7. Description of Work Install mechan i cal tube plugs in tube location R56*C82 (Hot and Cold Leg Side) Test Conducted:
Hydrostatic 0 PneumaticD Nominal Operating PressureD Other D Pressure psi Test Temp. 9Remarks
______________
_________________________ __ Applicable Manufacturer's Data Reports to be attached CERTIFICA TE OF I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section XIType Code Symbol NlA NIA rY----,_----Nl.-;I\----------
Expiration Date rintendent Date 5/;2Rf CERTIFICATE OF INSERVICE INSPECTiON I, the undersigned , holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by HfJrtfSl1'SL s.mam Boiler InsDection and Insurance Co. of Connecticut of Hartford , Connecticut have inspected the components desCribed in this Owner's Report during the period 0':)/1<\ / I :> to rxRl wl 1';' , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctIve measures described in this Owner's Report. Furthennore, neither the Inspector nor hIs employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ;...,-.
.
...._______
7" Signature National Board, State , Province and Date (C:S';/if Z/) 13 i ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ........;1..:.3.;;.0'-'75=--
___Owner Southern Nuclear Operating Company Date May 28 , 40 Inverness Center Parkway, Birmingham. Sheet of Address Plant Vogtle Electric Generating Plant Unit GA 30830 SNC135383 Address Repair/Replacement Organization P.O. No., Job No., etc. 3Work Performed by Maintenance Dee.artment Type Code Symbol Stamp Name Authorization No. N IPlant Vog,tle Expiration Date NlA Address 4. Identification 01 1201/Reactor Coolant System 5. (a) Applicable Construction ASME Sec. 1/1 Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition 01 Section XI Used for Repair/Replacement Activity
___ (c) Applicable Section XI Code Case(s): 1484-3. 1528-3. and N-474-1 6. Identi1ication Of Components National Corrected, ASME Code Name of Name of Menufacturer Board Other Year Removed, or Stamped Component Manu1acturer Serial No. No. Identification Built Installed (Yes or No) STEAM WESTlNGHOUSE GBGT-1983 NIA 2-1201-B6-002 1983 CORRECTED YES GENERATOR
: 7. Description of Work lnstaJ/ mechanical tube e.lugs in tube location R15-C60 (Hot and Cold Leg Side) Test Conducted:
Hydrostatic 0 PneumaticD Nominal Operating PressureD
______ oF Other D Pressure _____psi Test Temp. Remarks
____________
______
__
__________________
_ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NIA
+Ai-_-=-_____
_________
Expiration Date NIA Signed Superintendent Date 6'" -dO -&0CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InSD8ction and insurance CD. of Connecticut . of Ha/ford. Connecticut have inspected the components described in this Owner's Report during the period 3/B/} :5 ., to Jz /1-5 /,'> ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions GA 93[ National Board, State, Province and EndorsementsDate Z. S 'J ,) , :)


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'1.,:;3.:;.0,;..76=-
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'1.,:;3.:;.0,;..76=-_ _ _ __
_____ Owner Southern Nuclear Operating Company Date June 40 Invemess Center Parkway , Birmingham.
: 1. Owner         Southern Nuclear Operating Company                               Date                                           June 12.2013 Name 40 Invemess Center Parkway, Birmingham. AL                       Sheet                                                       of Address
AL Sheet of Address Plant Vogtle Electric Generating Plant Unit GA 30830 SNC474685 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance D(}Rartment Type Code Symbol Stamp Name Authorization No. Plant Vog,tle Expiration Date NlA Address 4. Identification of 1205 I Residual Heat Removal 5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Addenda, Winter 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity __-'2..,OO:.l<...!.1,.,e",d:..:,.""2"'O""O"'3,."a""d""d,:....
: 2. Plant         Vogtle Electric Generating Plant                                   Unit                                                     2 Name Waynesboro, GA 30830                                                                                   SNC474685 Address                                         Repair/Replacement Organization P.O. No., Job No., etc.
___ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) RELIEF VALVE CROSBY VALVE & N56904-00-0036 NIA 2PSV8708B 1977 INSTALLED YES GAGE CO. RELIEF VALVE CROSBY VAL VE & N56904-00-0017 NIA 2PSV8708B 1975 REMOVED YES GAGE Co. Description of Work Reliel valve serial nO.N56904-00
: 3. Work Performed by                 Maintenance D(}Rartment                       Type Code Symbol Stamp                                             NlA Name                               Authorization No.                                                 NIA Plant Vog,tle                               Expiration Date                                                   NlA Address
-0017 was replaced by relief valve serial no N56904-00-0036 as part 01 a mandatory scope expansion.
: 4. Identification of System                                                          1205 I Residual Heat Removal
The replacement relief valve is a rotating spare 8Test Conducted:
: 5.   (a) Applicable Construction Code                     ASME Sec. 1/1             Edition,           1971               Addenda,                 Winter 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity __-'2..,OO:.l<...!.1,.,e",d:..:,.""2"'O""O"'3,."a""d""d,:....___
Hydrostatic 0 PneumaticD Nominal Operating PressurelKJ Exempt Other 0 Pressure NOP psi Test Temp. NOT 9. Remarks
(c) Applicable Section XI Code Case(s)
______________________________________________________________________
: 6. Identification Of Components National                                                                 Corrected,                     ASME Code Name of               Name of               Manufacturer           Board             Other                   Year                     Removed, or                       Stamped Component             Manufacturer               Serial No.             No.           Identification               Built                       Installed                     (Yes or No)
__ Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code NIA -...,t--=-
RELIEF VALVE CROSBY VALVE &                     N56904-00-0036           NIA           2PSV8708B                   1977                     INSTALLED                           YES GAGE CO.
__________________
RELIEF VALVE CROSBY VAL VE &                     N56904-00-0017           NIA           2PSV8708B                   1975                       REMOVED                             YES GAGE Co.
Expiration N IA Superintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of HartfXnnecticut have inspected the components described in this ?wner's Report during the period I?3(Zl//3 to c4LZr3> ,and state that to the best of my knowledge and behef. the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.  
: 7. Description of Work Reliel valve serial nO.N56904-00-0017 was replaced by relief valve serial no N56904-00-0036 as part 01 a mandatory scope expansion. The replacement relief valve is a rotating spare
/" /l '? r/Commissions
: 8. Test Conducted:                         Hydrostatic 0         PneumaticD     Nominal Operating PressurelKJ                               Exempt   0 Other 0     Pressure           NOP     psi Test Temp.                 NOT                     OF
___..loL_<:<l-f'-1T'
: 9. Remarks                       _ _______________~__________~______~__~______________~________________________
__
_S~e~e~lt~em----'7 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
__ ,..-_______--:-____________
Type Code Syrnb                                                                                      NIA
_Inspector's National Board, State, Province and Endorsements Date 00/2&/2.0/3. 
                                          -...,t--=-_______N.:...::.:.VA~___________ Expiration Date                                                    NIA Si                                                                      Superintendent       Date     6/~'2(&?&sect; CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                   Georgia       and employed by             Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of HartfXnnecticut have inspected the components described in this ?wner's Report during the period I?3(Zl//3 to     c4LZr3>               ,and state that to the best of my knowledge and behef. the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
        ~~
                                                                                                / " /l C:~ '? r /
Commissions ___..loL_<:<l-f'-1T'__..J/L....<.:j~u~-=-__,..-_______--:-_____________
Inspector's Signature                                                      National Board, State, Province and Endorsements Date       .
00/2&/2.0/3


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=.3.:,;08;.,:0'--
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=.3.:,;08;.,:0'--_ _ __
____ 1Owner Southern Nuclear Operating Company Date June 40 Invemess Center Parkway, Birmingham, AL Sheet of Address Plant Vogt/e Electric Generating Plant Unit GA 30830 SNC475946 Address Repair/Replacement Organization P.O. No., Job No., etc. Work Performed by Maintenance Department Type Code Symbol Stamp Name Authorization No. N IPlant VogUe Expiration Date NIA Address 4. Identification of 1301 I Main Steam System 5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1974 Addenda, Winter 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ .....2..,OO'-'<-!1,..,e.,d"'.-=2"'O""O"'3"'a""d""d.:.-.
: 1. Owner        Southern Nuclear Operating Company                     Date                                                   June 17,2013 Name 40 Invemess Center Parkway, Birmingham, AL             Sheet                                                           of Address
___ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) VALVE FISHER CONTROL 9390783 NIA 2HV13005C NlA CORRECTED YES Co. 7. Description of Work Replace components on valve. Test Conducted; Hydrostatic 0 PneumaticD Nominal Operating pressureD Other D Pressure ____psi Test ______ *F 9. Remarks
: 2. Plant         Vogt/e Electric Generating Plant                         Unit                                                           2 Name Waynesboro, GA 30830                                                                               SNC475946 Address                                   Repair/Replacement Organization P.O. No., Job No., etc.
_________________________________________________________
: 3. Work Performed by               Maintenance Department               Type Code Symbol Stamp                                                   NlA Name                         Authorization No.                                                       NIA Plant VogUe                         Expiration Date                                                         NIA Address
__ Applicable Manufacturer's Data Reports to be aHached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol NIA Certifi ____________
: 4. Identification of System                                                  1301 I Main Steam System
---'''-'-__________
: 5.   (a) Applicable Construction Code                 ASME Sec. 1/1       Edition,             1974                   Addenda, Winter 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ .....2..,OO'-'<-!1,..,e.,d"'.-=2"'O""O"'3"'a""d""d.:.-._ __
Expiration NIA Superintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boller Inspection and Insvrance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 3/'Z.7/j;'
(c) Applicable Section XI Code Case(s)
to W 14 / . and state that to the best of my knowledge and belief, the Owner has performed exami nations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
: 6. Identification Of Components National                                                                     Corrected,                   ASME Code Name of                 Name of           Manufacturer       Board             Other                         Year                     Removed, or                     Stamped Component             Manufacturer             Serial No.       No.         Identification                     Built                       Installed                     (Yes or No)
Commissions
VALVE         FISHER CONTROL               9390783         NIA           2HV13005C                         NlA                     CORRECTED                           YES Co.
___-'"h,..:4t'-1-l-
: 7. Description of Work           Replace components on valve.
*__National Board, State, Province and Endorsements
: 8. Test Conducted;                     Hydrostatic 0   PneumaticD Nominal Operating pressureD                                           Exempt[R]
Other D     Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ *F
: 9. Remarks                     ______________~_~~__~____~~__~______________~_______________________
_S==ee~/t.=.em~7 Applicable Manufacturer's Data Reports to be aHached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                      NIA Certifi                                 ____________---'''-'-__________ Expiration Date                                                            NIA Superintendent       Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                 Georgia       and employed by       Hartford Steam Boller Inspection and Insvrance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period                                                       3/'Z.7/j;'
to     W       14 / (~ . and state that to the best of my knowledge and belief, the Owner has performed exami nations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions ___-'"h,..:4t'-1-l-*__S....L:.:::5~~::....-----:---~:----c,--------
National Board, State, Province and Endorsements


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..--'1.,;.3,;..08
ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..--'1.,;.3,;..08::..1'--_ _ __
::..1'--____ Owner Southern Nuclear Operating Company Date May 40 Inverness Center Parkway. 8irmingham, AL Sheet of Address Plant VogUe Electric Generating Plant Unit Waynesboro.
: 1. Owner         Southern Nuclear Operating Company                             Date                                 May 7.2013 Name 40 Inverness Center Parkway. 8irmingham, AL                     Sheet                                     of Address
GA SNC377580 Repair/Replacement Organization P.O. No., Job No., etc. 3Work Performed by Maintenance Deeartment Type Code Symbol Stamp Name Authorization No. Plant VogtJe Exp[ratlon Date NlA Address 4. Identification of 1201/Reactor Coolant System 5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...
: 2. Plant         VogUe Electric Generating Plant                                 Unit                                     2 Name Waynesboro. GA 30830                                                                          SNC377580 Address                                          Repair/Replacement Organization P.O. No., Job No., etc.
__ (c) Applicable Section XI Code Case(s) 6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No) STEAM WESTINGHOUSE 120-G8G T*1984 NlA 2-1201-86*001 1984 CORRECTED YES GENERATOR
: 3. Work Performed by               Maintenance Deeartment                       Type Code Symbol Stamp                             NIA Name                               Authorization No.                               NlA Plant VogtJe                                 Exp[ratlon Date                                 NlA Address
: 7. Description of Work Rep/ece hot leg (HL) primary manway studs #7 & #8 on Steam Generator  
: 4. Identification of System                                                      1201/ Reactor Coolant System
#1 Test Conducted:
: 5.   (a) Applicable Construction Code                   ASME Sec. 11/           Edition,           1971         Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2",O~01~ed~.,-"2""O,,,,03~ad~d~.,--__
Hydrostatic D Pneumatic D Nominal Operating PressureD Other 0 Pressure ___--psi Test Temp. ______ 9. CERTIFICATE OF I certify that the statements made In the report are correct and that this conforms to the requirements of the Code, Section Type Code Symbol Stamp NlA --I,;::..-
(c) Applicable Section XI Code Case(s)
____.;.;NI.:..;:A-'-
: 6. Identification Of Components National                                             Corrected,                     ASMECode Name of               Name of               Manufacturer           Board           Other                 Year       Removed, or                       Stamped Component             Manufacturer               Serial No.             No.         Identification           Built         Installed                     (Yes or No)
______Expiration Date NlA Date 3-9i2 /;(0/,,3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford $learn Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 03/" Zz!r "to 05/30/{ "2 " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions Inspector's National Board, State, Province and Endorsements Date 30?-1.hIj7-Di3}}
STEAM         WESTINGHOUSE               120-G8G T*1984             NlA       2-1201-86*001             1984       CORRECTED                           YES GENERATOR
: 7. Description of Work Rep/ece hot leg (HL) primary manway studs #7 & #8 on Steam Generator #1
: 8. Test Conducted:                     Hydrostatic D       Pneumatic       D Nominal Operating PressureD               Exempt~
Other 0     Pressure _ _ _- - psi Test Temp. _ _ _ _ _ _ oF
: 9. Remarks    -s.;..e~e~/le::..m~7------------~A-P-p~li-ca~b~l~e~M~a-n-m~a-ct~u-r-er~s~D~-a~ta~R~e-po~rts~t-o~be-a~tta~c~h-e~d~---------------------
CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section XI.
Type Code Symbol Stamp                                                                             NlA
                                        --I,;::..-_ _ _ _.;.;NI.:..;:A-'-_ _ _ _ _ _ Expiration Date                                 NlA Signed      H-~~..=J..t~~~=::-:~--=-:-:__=.::.:~::.:.in~te:.:.;:nd:.:.en:..:.:..-t        Date       3- 9i2 /;( 0/,,3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of                 Georgia         and employed by           Hartford $learn Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 03/"Zz!r "3 to     05/30/{ "2 " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
      ~ ~-"                                                            Commissions   ----,:-:-::G~-;><!:.A~3_'_'='*3,...:;'&:c_'_:___=-:__-_:_=__:_--.,__--
  ~ Inspector's Signature                                                                National Board, State, Province and Endorsements Date   30?-1.hIj7-Di3}}

Latest revision as of 04:29, 6 February 2020

R16 Inservice Inspection Report Summary
ML13184A269
Person / Time
Site: Vogtle Southern Nuclear icon.png
Issue date: 07/02/2013
From: Pierce C
Southern Nuclear Operating Co
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML13184A269 (74)
v • d • e


Text

Charles R. Pierce Southern Nuclear Regu latory Affairs Director Operating Company, Inc.

40 Inverness Cen ter Parkway Post Office Box 1295 Birmingham, Alabama 35201 Tel 205.992.7872 Fax 205.992.7601 SOUIHERN ' \

July 2, 2013 COMPANY Docket Nos.: 50-425 NL-13-1436 U. S. Nuclear Regulatory Commission AnN: Document Control Desk Washington , D. C. 20555-0001 Vogtle Electric Generating Plant - Unit 2 2R16 Inservice Inspection Report Summary Ladies and Gentlemen :

Southern Nuclear Operating Company (SNC) submits herewith the Vogtle Electric Generating Plant Unit 2, Interval 3, Period 2, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the spring 2013 maintenance I refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI , 2001 Edition with addenda through 2003 requires submittal of the enclosed report.

The supporting inservice inspection documentation, e.g ., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant.

Please note that on Tab F of the Enclosure, Sheet 2 of 3 and Sheet 3 of 3 for Traveler

  1. 11110 are the best copies available to SNC.

This letter contains no NRC commitments. If you have any questions, please contact Ken McElroy at (205) 992-7369.

Respectfully submitted, C. R. Pierce Regulatory Affairs Director CRP/RMJ/lac

U. Nuclear Regulatory Commission NL-1 436 2

Enclosure:

Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval 3, Period 2, Outage 2, A-F cc:

Mr. Kuczynski, Chairman, President &

Mr. D. G. Executive Vice President & Chief Nuclear Officer Mr. T. Tynan, President - Vogtle Mr. B. L. Ivey, President - Regulatory Affairs Mr. J. Adams, Vice President - Fleet Operations RType: CVC7000 Mr. V. M. Regional Administrator Mr. R. E. Martin, NRR Senior Project Manager - Vogtle Mr. L. M. Cain, Senior Resident Inspector - Vogtle

Vogtle Electric Generating Plant Unit 2 2R16 Report Summary Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval Period Outage 2, A~F

SOUTHERN _ SOUTHERN COMPANY COMPANY INSERVICE INSPECTION REPORT REFUELING 16 INTERVAL 3 PERIOD 2 OUTAGE 2 Vogtle Electric Generating Plant Unit 2 (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830)

Southern Nuclear Operating Company 40 Inverness Parkway Birmingham, Alabama 35242 COMMERCIAL OPERATION DATE: May 20,1989 DOCUMENT COMPLETION DATE: June 2013

VOGTLE ELECTRIC GENERATING (VEGP)

PLANT 2R16 FINAL REPORT TABLE OF CONTENTS VOLUME 1 (OWNER'S REPORT)

  • INTRODUCTION AND ABBREVIATIONS A
  • ASME FORM NIS-1 AND ABSTRACT B
  • INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

CLASS 1 AND 2 WELDS AND SUPPORT EXAMINATIONS C SYSTEM PRESSURE TESTS D REPORTABLE INDICATION

SUMMARY

E

  • OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (ASME FORM F VOLUME 2 (151 EXAMINATION DATA)
  • EXAMINATION PROGRAM PLAN SCOPE

SUMMARY

) G

  • lSI EXAMINATION DATA H VOLUME 3 (CERTIFICATIONS)
  • PERSONNEL CERTIFICATIONS I
  • EXAMINATION PROCEDURES J
  • EQUIPMENT CERTIFICATIONS & CALIBRATION BLOCKS (LISTING) K VOLUME 4 (FLOW ACCELERATED HO:SIUIN - FAC)
  • FAC EXAMINATION

SUMMARY

L

  • FAC EXAMINATION DATA M VOLU 1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A

SUMMARY

REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE.

VOLU 2 AND 3 CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS PERFORMED ON SITE BY VOLU 4 CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION (FAC) INSPECTIONS PERFORMED ON SITE BY VEGP) 1

SOUTHERN ~ SOUTHERN_

COMPANY COMPANY SOUTHERN NUCLEAR OPERA TING COMPANY ENGINEERING PROGRAMS DEPARTMENT INSERVICE INSPECTIONS PLANT VOGTLE UNIT 2 REFUELING OUTAGE 16 SPRING 2013 Volume 1 Owner's Report

TAB A INTRODUCTION AND ABBREVIATIONS

This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 2 th (VEGP-2) between October 12, 2011 &end of the fifteenth (15 ) maintenance/refueling outage, 2R15} and 1

April 3, 2013 of the sixteenth (16 ) outage, 2R16} to meet the requirements of Article IWA-6000 of the American Society of Mechanical Boiler and Pressure Vessel Section XI, 2001 Edition with 2003 Addenda This and/or which were documented since the last at VEGP-2 through the completion of the sixteenth maintenance/refueling outage on April 3, 2013 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form are included herein.

This report includes a summary of the steam generator tube inspections which are required per VEGP Technical 5.6.10. The detailed information will be provided in a one hundred (180) after the initial entry into MODE 4 following com of an inspection performed in accordance with Technical Specification 5.5.9. A summary these inspections is included behind Tab B in the Abstract.

1-1

LIST OF ABBREVIATIONS ACC Acceptable AD AnchorlDarling AFW Auxiliary Feedwater System AI SNC Action Item (followed by unique no. denoting Action Item number)

AN II Authorized Nuclear Inspector ASME American Society Mechanical Engineers ASNT American Society for Nondestructive Testing ASTM American Society for Testing and Materials BC Branch Connection Centrifugally Cast Stainless Steel CCW Component Cooling Water Combustion Engineering CH Head CR Condition Report CS Containment Spray CVCS Chemical Volume Control System Downstream Eddy rrent Examination Evaluation FAC Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion")

FB Flange Bolting FNF FAC Notification Report FW Feedwater System Final Safety Analysis Report (includes thereto)

Indications GPC Georgia Power Company HHSI High Head Injection HL Hanger HX Heat Exchanger Hydraulic Snubber NRC Information Notice (may shown as "IN" followed by unique no. denoting number)

IND Indication INF Indication Notification lSI Inservice Inspection Inservice Testing Improved Technical Specification 10 Inside Diameter IR Inside LB Large LD Longitudinal Seam Weld Extending Downstream Longitudinal Seam Weld Downstream Inside Radius of Longitudinal Seam Weld Downstream Outside of Elbow LMT Lambert, MacGiII Thomas LU Longitudinal Weld Extending Upstream LU-I Longitudinal Weld Upstream Inside LU-O Longitudinal Seam Weld Upstream M Mechanical Snubber MS Main Steam System MT Magnetic Particle Examination NCI Nonconformance Item NDE Nondestructive Examination 1*2

LIST OF ABBREVIATIONS - (continued)

NI No Indication NRC United States Nuclear Regulatory NRC-B NRC Bulletin (followed by unique no. Bulletin number)

NRI No Recordable Indication NSCW Nuclear Service Cooling Water OR Outside Radius PL Pipe Lug PM Paul-Munroe EN ERTECH PR Pipe Restraint PROF Profile PS Pipe Support PSA Pacific Scientific PSI Preservice Inspection PT Liquid Penetrant RCS Reactor Coolant System RCP Reactor Coolant Pump RHR Residual Heat Removal RI Recordable Indication RLW Refracted Longitudinal Wave RL Restraint Lug RPV Reactor iJr""""',

RR Relief Request (followed by unique no.

RWST Refueling Water Tank SAT Satisfactory Small SCS Southern Company Services SI Safety Injection System SNC Southern Nuclear Operating Company SUP Supplemental Data T&C Thickness and Contour TDAFW Turbine Driven Auxiliary Technical Evaluation (fol evaluation number)

UNSAT Unsatisfactory Examination US Upstream UT Ultrasonic Examination VEGP Vogtle Electric Generating Plant (common u followed by "-1" or" to designate a specific plant unit)

VT Visual Examination W Westinghouse 1-3

TABB ASME FORM NIS-1 AND ABSTRACT

  • Form NIS-1
  • Abstract

FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS

1. Owner: Southern Nuclear for Power 40 Inverness Center Birmingham, AL 35242
2. Plant: Vogtle Electric Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830
3. Plant Unit: Two
4. Owner Certification of Authorization: N/A
5. Commercial Service Date: 05/20/89
6. National Board Number for Unit: N/A
7. Components Component or Manufacturer or Manufacturer or Installer State or National Board Appurtenance Installer and Serial Number Province Number Address Number Reactor 7372 N/A 22004 Pressure Vessel Reactor Coolant 5*9744D35G01 N/A 37 Pump4 Steam GBGT 1981, GBGT 1 N/A 33,34. 36 Generators 1 Pensacola, FL GBGT 1983, GBGT 1 thru 4 Injection 52230 N/A 447 Pump Train "B" CA Residual Heat Joseph Oat 2322-2D N/A 1051 Removal Heat NJ Exchanger, Train "B" Centrifugal Huntington Pumps 52236 N/A
  • 413 Charging Pump, Huntington CA Train HB" Pullman Power System Numbers 1201, 1 N/A N/A Products, 1204, 1205, 1 1 Williamsport, PA 1301,1302, & 1501 2-1

FORM NIS-1 (Back)

8. Examination Dates: October 12, 2011 to April 3, 2013
9. Inspection Period Identification: Second Period
10. Inspection Interval Identification: Third Inspection Interval
11. Applicable Edition of Section XI 2001 Addenda 2003
12. Date/Revision of Inspection Plan: Volume 1 - 12/12/12, Version 7.0; Volume 3 - 12/8/11, Version 2.0; Volume 4 - 1/25/13, Version 6.0; Volume 5 - 2/22/13, Version 4.0; Volume 6 - 12/15/11, Version 4.0
13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings)
14. Abstract of Results of Examinations and Tests. (See Abstract)
15. Abstract of Corrective Measures. (See Abstract)

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c . easures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) N/A Date: t, - 2.r~ 2013 Signed:

o Geor CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford, CT have inspected the components described in this Owner's Report during the period October 12, 2011 to April 3, 2013, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commission: c'1J 93 '8

'YlnSpector's Signature National Board, State, Province, and Endorsements Date: '2 ~ :JtJl\e... 20&

2-2

ABSTRACT - ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code,Section XI, 2001 Edition (Code), with the 2003 Addenda, is the code for conducting inservice inspection activities during the third inspection interval at VEGP-2. Examinations and tests required by the Code are scheduled in accordance with "Inspection Program Bn as defined in Code paragraphs IWB-2412 and IWC-2412. This "Owner's for Inservice is for those second examinations and tests which were performed between (end of the 2R15 and April 3, 2013 (end of the 2R16 outage).

VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federal Register Notices 64 FR 51370 dated September 22, 1999, as later modified by 69 dated October 1, 2004. The initial Rule specified the 1995 Edition with Addenda 1996 as the edition of ASME Section XI, Appendix VIII. The 2004 Rule the Edition with caveats. VEGP except where requests for technical alternatives or exemptions have been approved, complied with the

,,,,rr,,,,nrc for implementation of the Appendix VIII the EPRI Performance Demonstration Initiative (PDI).

In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and documented at VEGP-2 since 2R15 through the end of 2R16. Class 1 and Class 2 Owner's Reports for Repairs or Replacements NIS-2) are provided herein.

It should be noted that Authorized Nuclear Inservice (ANII) services were provided for those examinations and tests the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category. Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT) and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

  • During the scope of VEGP-2 examinations conducted, no Class 1 components were observed to have indications. SNC defines "reportable as those indications exceeding standard of ASME XI. Since there were no observed Class 1 reportable n/'1I.... :::tlll"lrl~

there will not be any entries in Tab E for of Class 1 components. It should also be noted that no indications were "identified" which dispositions to acceptance standards.

Three Class 1 and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI examination coverage to be attained. As noted the subject code case has been by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometriC configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief process as allowed by 10 CFR 50.55a.

2*3

Southern Nuclear Company contracted WesDyne to support Reactor Vessel Head Inspections during the 2R 16 outage. The requirement for tooling was unique to VogUe compared to the normal operation due to distance required from the floor to the head equipment was built to operate to these requirements.

were the Electric Power in 2009. In addition to the personnel were also demonstrated and These demonstrations did require some from the previous in 2006 which enhanced the "cr,ot'l',,,,,

One of the requirements was to utilize both the circumferential and axial shooting TOF techniques for the required volume utilizing Code Case N-729-1. This requirement lead to development and deployment of 2 blade which has both TOF directions with a zero degree for leak path assessment which was also demonstrated and qualified at PDI with the open probes.

No in-service was reported with the RPV CRDM examinations. Some examination limitations occurred which Southern Nuclear had previously addressed with Alternative VEGP-ISI-ALT-07, 7/19/2012 (ML121 ",,,,n,s:..vv Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI the performance of a test (IWB-5221) each outage. This system leakage test (14910-201) was performed prior to plant startup the refueling outage.

These visual examinations revealed minor and boron residue at mechanical connections. These leakage conditions were either corrected or evaluated and determined <:lr-r'o,...'r!> for continued operation.

Of particular interest to the system leakage test is the seal cap enclosures on four Class 1 check valves.

The VT -2 examination was performed with these seal cap enclosures in which could prevent pressure boundary from being detected. Southern Nuclear submitted an alternative to the NRC requesting approval to the VT-2 examination with the seal caps installed. NRC approval forthe alternative examination is documented in NRC Accession No. ML13123A 1 "Vogtle Electric Plant, Units 1 and 2 - Safety Evaluation of Relief Request Version 2.0, Regarding Tests for Reactor Coolant Pressure Boundary (TAC NOS. MF0673 AND MF0674)" dated May 7,2013. No evidence of leakage was observed during the VT-2 examination performed during the leakage test with the seal cap enclosures installed.

Selected Class 2 were examined Southern Nuclear Company (SNC) personnel utilizing ultrasonic testing (UT). liquid penetrant (PT). and visual testing (VT) methods, as applicable.

Specific components and examination areas are itemized in the applicable portions of this document.

.. During the scope of VEGP-2 examinations conducted, no Class 2 components were observed to have indications. SNC defines "reportable as those indications exceeding ",n."*If'..,

standard of ASME XI. Since there were no observed Class 2 reportable there will not be any entries in Tab E for of Class 2 It should also be noted that no indications were "identified" which standards.

No class 2 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas.

2-4

Class 2 System Pressure Tests Table IWC-2500-1, Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the "System Pressure Tests" portion of this report document. The visual examinations performed during these system leakage tests found only minor leakage or residue at mechanical joints such as valve stem packing and at flanged connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.

Steam Generator Tube Inspections The scope of the Vogtle 2R16 steam generator examinations, as scheduled, is listed below. The inspection plan met or exceeded the requirements of the ERPI PWR Steam Generator Examination Guidelines, revision 7, and was aligned with the SNC SG Program Strategic Plan, NMP-ES-004-GL01, version 11. The SG inspection program addressed the known degradation mechanisms observed in VogUe Unit 2 in prior inspections as well as potential degradation mechanisms. The program also addressed inspection requirements related to the implementation of the permanent H* alternate repair criteria (PARC).

  • 100% Bobbin examination of tubes in SGs 2 and 3 full length except for Rows 1 and 2, which are inspected from tube end to tube support plate (TSP) #7 from both hot leg (HL) and cold leg (CL).
  • 100% +Point examination of Row 1 and Row 2 U-bends from the top TSP on the HL to the top TSP on the CL in SGs 2 and 3.
  • +Point examination of Special Interest, HL and CL, of bobbin possible flaw locations including U bends.
  • 100% +Point examination at HL tubes in SGs 2 and 3 from the top of tubesheet (TTS) to the licensed Permanent Alternative Repair Criteria (ARC) depth for H* (tubesheet region on HL side (TSH) +3/-15.2 inches). This inspection captured the TTS BLGI OXP populations, as defined below, along with the required periodic sample specified in the regulatory approval of ARC.

BLG = differential mix diameter discontinuity signal within the tubesheet of 18 volts or greater as measured by bobbin coil probe; OXP = a tube diameter deviation within the tubesheet of 1.5 mils or greater as measured by bobbin coil profile analysis.

  • 100% +Point examination of total dents and dings ~ 2 volts in SGs 2 and 3 HL straight lengths and U-bends.
  • 100% Visual inspection of tube plugs in SGs 2 and 3.
  • Visual inspection in SGs 2 and 3 of channel head primary side HL and CL in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".

Steam Generator Inspection Expansion Based on the confirmation of ODSCC at the hot leg tubesheet expansion transitions in SG2, expansion of the eddy current program was conducted in SGs 1 and 4 with a minimum scope of 20% +Point of tubesheet +3/-15.2 inches along with a 100% inspection of tube plugs in SGs 1 and 4. This expansion was conducted in accordance with the requirements of the EPRI SG Examination Guidelines.

Additionally, visual inspection of the channel head primary side HL and CL of SGs 1 and 4 has been performed as part of the expansion in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".

2-5

Steam Generator Damage Mechanisms Found and NDE Techniques Utilized Based on SG eddy current and visual inspection results, a new degradation mechanism to Unit 2 was identified. The existing degradation mechanisms in the VogUe Unit 2 are:

  • (New) Outer Diameter Stress Corrosion Cracking (ODSCC) at the hot leg tubesheet expansion transitions (A single circumferential ODSCC was identified). - +Point probe and Ghent probe techniques were used to analyze the indication.
  • Mechanical Wear due to Foreign Objects - +Point and bobbin techniques were used to evaluate the wear.
  • Mechanical Wear at AVB Supports. - Bobbin techniques were used to evaluate wear.
  • Mechanical Wear and Wall loss from Secondary Side Cleaning Activities. - Bobbin techniques were used to evaluate wear.

The table below presents a summary list of all SG tubes plugged in 2R16 and the related degradation mechanism.

Degradation %TW~ Plugging Basis Stabilizer SG Row Col Indication Mechanism Installed 1 3 2 15 60 SCI ODSCC 33% Plug on Detection Yes 2 4 41% Tech Spec Plugging Limit No 3 56 82 PCT AVB Wear Notes:

1 - Single Circumferential Indication 2 - Bobbin Volumetric Sizing 3 - Outside Diameter Stress Corrosion Cracking 4 - Anti-Vibration Bar 5 - Percent Through-Wall Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document.

  • During the scope of VEGP-2 examinations conducted, one component support (21302-107 -H004) was observed to have a loose locking nut, which constituted unsatisfactory visual results. In accordance with IWF-3122.3(a) the condition was determined to be acceptable by evaluation.

Although evaluated to be acceptable the condition identified was corrected under Southern Nuclear MWO SNC475383 with a re-examination occurring after corrective actions were taken. The examination results and corrective action is listed with the Indication Notification section of this report (Reference INF 113V2001).

Class MC Containment Examinations (lWE)

During the VEGP-2 Spring 2013 maintenance/refueling outage, General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI, Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using NMP-ES-024-207 "General Visual Examination (IWE)". Per procedure NMP-ES-024-207, the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate its leak-tightness or structural integrity.

2-6

Personnel performing the examinations were qualified in accordance with VEGP procedure NMP-ES-024 100 "Qualification and Certification of Nondestructive Examination and Personnel". Optical aids such as flashlights, mirrors and binoculars were used when the examinations that included both direct and remote visual examination methods.

A General of 100% of the interior accessible surface areas of the containment pressure was and documented under Surveillance 84303-201 Exterior ....",t..."1

were not examined this refueling outage, bul will be examined laler in the Period. the examination a section of the liner plate was found to be bulging. CR 610528 was written to document the indication and INF 113V2002 was to document the condition as well. The area of the liner plale was found to be "as-is" using a previous evaluation. More information can be obtained referencing the INF listed under Tab E. All remaining anomalies found consisted of surface rust, discolorations, arc etc. and were evaluated as not affecting the structural integrity or leak of the containment pressure boundary.

of the moisture barrier was and documented under Surveillance 84303-201 SNC350383 during refueling outage 2R16. No anomalies on the moisture barrier were noted.

The following containment pressure boundary bolted connections were examined during 2R 16 while the connections were disassembled for work activities. VT-1 or VT-3 examinations were performed to fulfill the requirements. No anomalies of the examined were identified. Examinations were under work orders SNC362740, SNC363211, and SNC376511. Results of examinations are documented under Surveillance 84303-201-SNC350383.

Personnel Air Lock 22101R2014 Air Lock 22101R2015 Dedicated Outage PAnAI:rl'llinn 5-M & 55-M None performed in 2R16.

This 2R16 Outage was the Outage, in the Period ofthe 3(d Interval. The results from this outage, combined with the "completed" examinations from previous refueling (2R 15, Fall 2011) and a rd couple of examinations scheduled for 2R 17, the 1 in the 3rd Period of the 3 Interval until then in accordance with IWA-2430{d)(3) will 100% of the total Class 1 and 2 scope for the current period and interval. VEGP Unit 2 is within ASME Code compliance, pending NRC approval of the volumetric and/or surface examination limitations. Requests for relief will be submitted within the time frame specified by 10 CFR 50.55a.

Applicable Code Cases The applicable Code Cases for the 2R16 are identified in Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan for the Third Inspection Interval under Enclosure 4. The Code Cases and limitations of use are derived from Revisions 14, 15, and 16 of NRC Guide 1.147.

2-7

TABC INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • CLASS 1 AND 2 WELD EXAMINATIONS
  • CLASS 1 AND 2 SUPPORT EXAMINATIONS

6- Summary 21201-031-3-RB I NMP-ES-024-501 I S13V2U015 NRI 2" ELBOW TO PIPE 21201-042-3-RB I NMP-ES-024-501 I S13V2U016 NRI R1.11H 2" ELBOW TO PIPE R-A(2) 21201-046-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U017 R-A(2) 21201-051-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U018 NRI R-A(2) 21201-051-4-RB R1.20 2" PIPE TO TEE I NMP-ES-024-501 I S13V2U019 NRI I Limited exam >90% coverage. CC N-460.

R-A(2) 21201-051-5-RB NMP-ES-024-50 1 S13V2U020 NRI Limited exam >90% coverage. CC N-460.

R1.20 2" TEE TO PIPE R-A(2) 21204-021-17 -RB UT RI Geo. 50% Code Coverage.

NMP-ES-024-501 S13V2U030 RI R1.20 6" VALVE TO PIPE (AI 87-0131) 21204-021-18-RB NMP-ES-024-501 S13V2U011 RI UT RI 6" PI PE TO ELBOW Geo.

21204-021-19-RB I NMP-ES-024-501 I S13V2U029 RI I UTRI Geo.

6" ELBOW TO PIPE (AI 87-0131) 21204-021-20-RB NMP-ES-024-501 I S13V2U012 NRI INA 6" PIPE TO ELBOW 21204-021-22-RB 6" PIPE TO ELBOW NMP-ES-024-50 1 S13V2U013 RI I UTRI Geo.

21204-021-23-RB I NMP-ES-024-501 I S13V2U014 RI 6" ELBOW TO PIPE 21204*243*30-RB I NMP-ES-024-501 I S13V2U021 NRI R1.11 1B' VALVE TO PIPE R-A(2) 21204-243-31-RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U022 NRI R-A(2) 21204*244-28*RB R1.11 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U025 NRI I Examined per MRP-146 R-A(2) 21204*244*29*RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U026 NRI R-A(2) 21204-245-30-RB R1.11H 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U023 NRI I Examined per MRP-146 3-1

Vogtle 6 - Exami Summary (Total Piping)

ASME EXamfl,ai Section n Sheet Results r-I v",...

Cat II~~!!! No(s)

~ti~) 21204-245-31-RB Examined per MRP-146 requi ltS.

NMP-ES-024-501 S13V2U024 NRI 1.5" PIPE TO ELBOW Limited exam - >90% coverage. CC N-460.

~;~(~) 21204-246-32-RB 1.5" VALVE TO PIPE NMP-ES-024-501 S13V2U027 NRI Examined per MRP-146 R-A(2) 21204-246-33-RB lined per MRP-146 requi lents.

NMP-ES-024-501 S13V2U028 NRI R1.11H 1.5" PIPE TO ELBOW Limited exam >90% coverage. CC N-460.

C-C 21205-007 -72 NMP-ES-024-301 S13V2POO2 NRI NA C3.20 SUPPORT H022

-C 21205-008-35 NMP-ES-024-301 S13V2P003 NRI Limited exam >90% coverage. CC N-460.

C3.20 SUPPORT HOO2 C-C 21205-027 -6 NMP-ES-024-301 S13V2POO1 NRI Limited exam - >90% coverage. CC N-460.

C3.20 SUPPORT HOO8 C-C 21206-002-29 NMP-ES-024-301 S13V2POO4 NRI NA C3.20 SUPPORT HOO8

~ti~) 21208-007 RB 3" VALVE TO PIPE NMP-ES-024-501 S13V2U009 NRI 50% Code Cov.erage ..

Relief Request required.

~ti~) 21208-007-2-RB 50% Code Coverage.

NMP-ES-024-501 S13V2U010 NRI 3" PIPE TO VALVE Relief~equest required.

f---------

~--A(2) 21208-007 -G-RB NMP-ES-024-501 S13V2U031 NRI NA R1.11 3" PIPE TO BRANCH CONNECTION

~tJ~) 21302-107-13-RB PENETRATION TO 6" PIPE NMP-ES-024-502 S13V2U005 NRI NA

~tJ~) 21302-107-14-RB 6" PIPE TO VALVE NMP-ES-024-502 S13V2UOO6 NRI NA R-A(2) 21302-107-15-RB NMP-ES-024-502 S13V2U007 NRI NA R1.20 6" VALVE TO PIPE R-A(2) 21302-107-1G-RB NMP-ES-024-502 S13V2UOO8 NRI NA

~:20 6" PIPE TO ELBOW 21302-109-15-RB NMP-ES-024-502 S13V2UOO1 NRI NA R1.20 PENETRATION TO 6' PIPE

~tJ~) ..

21302-109-19-RB

_ 6" VALVE TO PIPE NMP-ES-024-502 S13V2U002 NRI NA R-A(2) 21302-109-20-RB NMP-ES-024-502 S13V2UOO3 NRI NA

~O 6" PIPE TO ELBOW 3-2

Vogtle 2R16 - nation Summary Pipi Examination Results Remarks No(s 21302-109-21-RB NMP-ES-024-502 I S13V2U004 NRI NA

' - - _ - ' - -_ _ _ _ _L. 6" ELBOW TO PIPE 3-3

6 - Examination Summary (Total Equipmert<l.

ASME Exam/Cal Section mathn Sheet Procedure{s)

Cat litem No(s)

N-122 21201-BS-001-110-VT NMP-ES-024-202 S13V2V108 Sat NA 20 CHANNEL HEAD DRAIN TUBE B-D 21201-BS-001-IR-01 NMP-ES-024-513 S13V2U033 NRI NA B3.140 INLET NOZZLE INNER RADIUS B-D 21201-B6-001*IR-02 NMP-ES-024-513 S13V2U034 NRI NA B3.140 OUTLET NOZZLE INNER RADIUS N-122 21201-B6-002-110-VT NMP-ES-024-202 S13V2V109 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE N-122 21201-BS-003-110-VT NMP-ES-024-202 S13V2V110 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE N-722 21201-BS-004-110-VT NMP-ES-024-202 S13V2V111 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE B-G-2 I-P6-002-B33 B48 Performed QC PtJl::iOIIIi per 2" DIAMETER SEAL WATER HOUSING NMP-ES-024-201 NA Sat B7.60 BOLTS Work Order SNC456322.

N-722 21201-V6-001-BMI-BMV RPV BOTTOM HEAD INSTRUMENTATION NMP-ES-024-208 S13V2V052 Sat NA B15.80 BMV N-129 21201-V6.001-C~DI\JI@~.'Q NMP-ES-024-208 S13V2V163 Sat NA B4.10 BMV VESSEL CLOSURE HEAD EXTERIOR Reference Westi Jhouse Report WDI N-729 21 ,v*CRDM VENDOR VENDOR Sat PJF-1 . Limitations all B4.20 CRDM NOZZLE qreater than 98% coveraQe.

B-N-1 21201-VS-001-101 NMP-ES-024-203 S13V2V186 Sat NA B13.10 VESSEL INTERIOR B-N-1 21201-VS-001-102 VESSEL CLOSURE HEAD INTERIOR (FSAR NMP-ES-024-203 S13V2V088 Sat NA B13.CH 5.3.3.7l N-122 21201*VS*001*W33*BMV NMP-ES-024-202 S13V2V145 Sat NA B15.90 OUTLET NOZZLE N1 SAFE END BMV N*722 21201-VS-001-W3S-BMV NMP-ES-024-202 S13V2V146 Sat NA B15.90 OUTLET NOZZLE N4 SAFE END BMV N-722 21201-V6-001-W37 -BMV NMP-ES-024-202 S13V2V147 Sat NA B15.90 OUTLET NOZZLE N5 SAFE END BMV N-122 21201-V6-001-W40-BMV NMP-ES-024-202 S13V2V148 Sat NA B15.90 OUTLET NOZZLE N8 SAFE END BMV 3-4

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Examination/Area Sheet Results Remarks Procedure(s)

Cat /Item No(s).

F-A 21201-012-H604 NMP-ES-024-203 S13V2V171 Sat NA F1.10H(2) VAR SPRING F-A 21201-030-H602 NMP-ES-024-203 S13V2V183 Sat NA F1.10G(2) STRUT F-A 21201-030-H606 NMP-ES-024-203 S13V2V187 Sat NA F1.10G(2) STRUT F-A 21201-030-H630 NMP-ES-024-203 S13V2V112 Sat NA F1.10F(2) RESTRAINT F-A 21201-049-H024 NMP-ES-024-203 S13V2V161 Sat NA F1.10G(2) STRUT F-A 21201-P6-004-SP01 NMP-ES-024-203 S13V2V114 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP02 NMP-ES-024-203 S13V2V115 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP03 NMP-ES-024-203 S13V2V116 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-T01 NMP-ES-024-203 S13V2V117 Sat NA F1.40(2) RESTRAINT F-A 21201-P6-004-T02 NMP-ES-024-203 S13V2V113 Sat NA F1 .40(2) RESTRAINT F-A 21201-P6-004-T03 NMP-ES-024-203 S13V2V188 Sat NA F1.40(2) RESTRAINT Limitations . Approximately 25%

F-A 21201-V6-001-RS1 NMP-ES-024-203 S13V2V141 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req'd .

Limitations. Approximately 25%

F-A 21201-V6-001-RS2 NMP-ES-024-203 S13V2V142 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

Limitations. Approximately 25%

F-A 21201-V6-001-RS3 N MP-ES-024-203 S13V2V143 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

Limitations. Approximately 25%

F-A 21201-V6-001-RS4 NMP-ES-024-203 S13V2V144 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

3-5

Vogtle 2R16 - Examination Summary (Total Supports)

ASME II eo> .4-: ...

,n ExaminationlArea I ___ =UI -,._-

~ ........"'+ Results Remarks litem No(s).

F-A 21202-001-H018 NMP-ES-024-203 S13V2V101 Sat NA F1.20G(2) STRUT 21202-140-HOO3 NMP-ES-024-203 S13V2V032 Sat NA F1.20F(2) RESTRAINT F-A 21202-141-H011 NMP-ES-024-203 S13V2V033 Sat NA F1.20G(2) STRUT F-A 21202-216-H014 NMP-ES-024-203 S13V2V055 Sat NA F1.20F(2) RESTRAINT F-A 21202-216-H019 NMP-ES-024-203 S13V2V095 Sat NA F1.20F(2) RESTRAINT F-A 21202-216-H020 N MP-ES-024-203 S13V2V096 Sat NA F1.20F(2) RESTRAINT F-A 21202*216-H021 NMP-ES-024-203 S13V2V056 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-HOO3 NMP-ES-024-203 S13V2V079 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-HOO5 NMP-ES-024-203 S13V2V068 Sat NA F1.20G(2) STRUT F-A 21202-220-HOO6 NMP-ES-024-203 S13V2V069 Sat NA F1.20G(2) STRUT F-A 21202-220*H011 NMP-ES-024-203 S13V2V070 Sat NA F1.20F(2) RESTRAINT F*A 21202-220-H015 NMP-ES-024-203 S13V2V071 Sat NA F1.20F(2) RESTRAINT F-A 21202*220*H017 NMP-ES-024-203 S13V2V072 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-H023 NMP-ES-024-203 S13V2V073 Sat NA F1.20F(2) RESTRAINT 21202-220-H025 N MP-ES-024-203 S13V2V074 Sat NA F1.20F(2) RESTRAINT/LUGS F*A 21202-220-H028 NMP-ES-024-203 S13V2V103 Sat NA F1.20G(2) STRUT F-A 21202-220-H029 NMP-ES-024-203 S13V2V102 Sat NA F1.20G(2) STRUT 3-6

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Exam i nation/Area Sheet Results Remarks Procedure(s)

Cat litem No(s).

F-A 21202-229-H012 NMP-ES-024-203 S13V2V097 Sat NA F1.20F(2) RESTRAINT F-A 21202-229-H021 NMP-ES-024-203 S13V2V107 Sat NA F1.20F(2) RESTRAINT F-A 21204-011-HOO5 NMP-ES-024-203 S13V2V022 Sat NA F1.20F(2) RESTRAINT F-A 21204-012-HOO1 NMP-ES-024-203 S13V2VOO3 Sat NA F1.20F(2) RESTRAINT F-A 21204-021-HOO2 NMP-ES-024-203 S13V2V162 Sat NA F1.10G(2) STRUT F-A 21204-021-HOO4 NMP-ES-024-203 S13V2V129 Sat NA F1.10F(2) RESTRAINT F-A 21204-021-HOO8 NMP-ES-024-203 S13V2V130 Sat NA F1.10G(2) STRUT F-A 21204-021-H 009 NMP-ES-024-203 S13V2V131 Sat NA F1.10F(2) RESTRAINT F-A 21204-021-H011 NMP-ES-024-203 S13V2V164 Sat NA F1.10G(2) STRUT F-A 21204-021-H012 NMP-ES-024-203 S13V2V132 Sat NA F1.10G(2) STRUT F-A 21204-021-H014 NMP-ES-024-203 S13V2V133 Sat NA F1.10G(2) STRUT F-A 21204-021-H015 NMP-ES-024-203 S13V2V134 Sat NA F1.10G(2) STRUT F-A 21204-021-H016 NMP-ES-024-203 S13V2V135 Sat NA F1.10F(2) RESTRAINT F-A 21204-039-HOO1 NMP-ES-024-203 S13V2V177 Sat NA F1.20A(2) ANCHOR F-A 21204-063-HOO1 NMP-ES-024-203 S13V2V034 Sat NA F1.20F(2) RESTRAINT F-A 21204-076-H010 NMP-ES-024-203 S13V2V122 Sat NA F1.JOC;(2) STRUT F-A 21204-076*H011 NMP-ES-024-203 S13V2V123 Sat NA E~*1Qft~L RESTRAINT 3-7

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Examination/Area Sheet Results Remarks Procedure(s)

Cat litem No(s}.

F-A 21204-076-H014 NMP-ES-024-203 S13V2V124 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H015 NMP-ES-024-203 S13V2V125 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H017 NMP-ES-024-203 S13V2V126 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H019 NMP-ES-024-203 S13V2V127 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H021 NMP-ES-024-203 S13V2V128 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H023 NMP-ES-024-203 S13V2V175 Sat NA F1.10G(2) STRUT F-A 21204-121-HOO1 NMP-ES-024-203 S13V2V084 Sat NA F1.20F(2) RESTRAINT F-A 21204-P6-004-S01 NMP-ES-024-203 S13V2VOO4 Sat NA F1.40(2J PUMP SUPPORT F-A 21205-003-H010 NMP-ES-024-203 S13V2V160 Sat NA F1.20F(2) RESTRAINT/LUGS F-A 2120S-004-H019 NMP-ES-024-203 S13V2V011 Sat NA F1.20F(2) RESTRAINT F-A 2120S-006-HOO9 NMP-ES-024-203 S13V2V012 Sat NA F1.20G(2) STRUT F-A 21205-007 -H022 NMP-ES-024-203 S13V2V013 Sat NA F1.20F(2) RESTRAINT F-A 21205-007-H02S NMP-ES-024-203 S13V2V014 Sat NA F1.20G(2) STRUT F-A 21205-008-H023 NMP-ES-024-203 S13V2V017 Sat NA F1.20F(2) RESTRAINT F-A 21205-008-H039 NMP-ES-024-203 S13V2V015 Sat NA F1.20H(2) VARSPRING F-A 21205-027 -H008 NMP-ES-024-203 S13V2V050 Sat NA F1.20F(2) RESTRAINT F-A 21205-E6-002-S01 NMP-ES-024-203 S13V2V016 Sat NA F1.40(2) SUPPORT SKIRT 3-8

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cel!

Section XI ._ .. _...

,~tinnl Examination Sheet .,--~ ..

~AC:llltc: Remarks Cat litem No(s).

F-A 21206-001-H007 NMP-ES-024-203 S13V2V157 Sat NA F1.20H(2) VAR SPRING F*A 21206-002-H022 NMP-ES-024-203 S13V2V049 Sat NA F1.20F(2) RESTRAINT F-A 21206-004*H006 NMP-ES-024-203 S13V2V053 Sat NA F1.20F(2) RESTRAINT F-A 21206*008*H096 NMP-ES-024-203 S13V2V078 Sat NA F1.20G(2) STRUT F-A 21208-007 -H001 NMP-ES-024-203 S13V2V165 Sat NA F1.10F(2) RESTRAINT F-A 21208-099-H603 NMP-ES-024-203 S13V2V051 Sat NA

~1 IF(2) RESTRAINT 21208*137*HOO1 NMP-ES-024-203 S13V2V028 Sat NA F1.20F(2) RESTRAINT F-A 21208*139-HOO4 NMP-ES-024-203 S13V2V026 Sat NA F1.20F(2) RESTRAINT F-A 21208*139*HOO9 NMP-ES-024-203 S13V2V027 Sat NA F1 RESTRAINT 2120S-145-HOO6 NMP-ES-024-203 S13V2V023 Sat NA F1.20F(2) RESTRAINT F-A 21208-411-H010 NMP-ES-024-203 S13V2V024 Sat NA F1.20U(2) UNDERSUPPORT F*A 21208-411*H016 NMP-ES-024-203 S13V2V025 Sat NA F1.20U(2) UNDERSUPPORT F-A 21208*P6*003*S01 NMP-ES-024-203 S13V2VOO7 Sat NA F1.40(2) SUPPORT BASE F-A 21301*016-HOO3 NMP-ES-024*203 S13V2V151 Sat NA If1:20G(2) STRUT 21302*033-HOO2 NMP-ES-024-203 S13V2V174 NA Sat F1"20A121 f-CCC""" LeL """""""""

ANCHORW/ATI 21302-086-HOO5 NMP-ES-024-203 S13V2V140 NA Sat F1.20A(2) ANCHOR 3-9

Vogtle 2R16- Summary pports)

ASME Exam/Cal

.40: .... XI Examination e Examination/Area Sheet Results Rema.

Procedure(s)

Cat litem No(s).

Loose "jam nut". 't" lhlp "as-is" F-A 21302-107-H004 Unsat I per Ref INF 113V2001.

NMP-ES-024-203 S13V2V176 F1 RESTRAINT Sat Corrected per MWO SNC475383 and re-examined.

F-A 21302-107 -H009 NMP-ES-024-203 S13V2V170 Sat NA F1.20F(2J RESTRAINT F*A 21302*109*H004 NMP-ES-024-203 S13V2V149 Sat NA F1.20F(2)

~~~~~~~~.

RESTRAINT 21501*027*HOO3 NMP-ES-024-203 S13V2V185 Sat NA F1.20F(2) RESTRAINT F*A 21501*028*H001 NA NMP-ES-024-203 S13V2V180 Sat F1.20U(2) UNDERSUPPORT F-A 21501-028-H005 NMP-ES-024-203 S13V2V166 Sat NA F1.20F(2) RESTRAINT F*A 21501-038*HOO2 NMP-ES-024-203 Sat NA S13V2V100 F1.20F(2) RESTRAINT F*A 21501-038*H003 NMP-ES-024-203 S13V2V099 Sat NA F1.20F(2) RESTRAINT F-A 21501-038-H004 NMP-ES-024-203 S13V2V098 Sat NA c£L.. 1(2) UNDERSUPPORT 3*10

TABD INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • SYSTEM PRESSURE TESTS

The following system pressure tests on Class 1 and Class 2 nAI'Tnr'm~'r1 after the last refueling outage (2R 15) through the completion of the sixteenth The system pressure tests indicated below include system tests for:

.. Class 1 components (IWB-2500-1, Examination B-P),

.. Class 2 components (IWC-2500-1, Examination C-H) not during normal plant operation which are identified as 84003-203 84003-221,

.. Class 2 components (IWC-2500-1, Examination category to normal operation which are Identified as 84003-2AR through 84003-2CS.

Boundaries for the system pressure tests are described in the Pressure Test Plan Plan-Volume 3). Examination results are discussed in the sections of document.

The examination data for these system pressure tests is available at the site for review upon Test Description 14910-201 B-P I B15.10 84003-203 C-H/C7.10 to Cold 84003-206 C-H I C7.10 Penetration 33 (Safety Injection to Hot Test 84003-207 C-H I C7.10 Penetration 31 (Safety Injection to Hot Test 84003-209 C-H/C7.10 Penetration 56 (Residual Heat Removal Hot Leaka e Test 84003-210 C-H/C7.10 e Test 84003-211 C-H/C7.10 Residual Heat Removal System to Chemical and Volume Control S stem Suction S stem Leaka e Test 84003-214 C-H/C7.10 Turbine Driven Auxiliary Feedwater Pump 1302-P4-001 Leakage Test 84003-218 C-H/C7.10 Residual Heat Removal Train "An Suction Piping in Tank System Leakage Test 84003-219 C-H/C7.10 Residual Heat Removal Train "B" Suction Piping in Tank S stem Leaka e Test 84003-220 C-H I C7.i0 Tank 84003-221 C-H/C7.10 Tank 84003-2AR C-H I C7.10 Test 84003-2AS C-H I C7.10 84003-2CI C-H I C7.10 84003-2CJ C-H I C7.10 1302-P4-003 84003-2CS C-H I C7.i0 4-1

lABE IN RVIC INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • REPORTABLE INDICATION

SUMMARY

REPORTABLE INDICATION

SUMMARY

The following Indication Notifications Forms and/or Condition were issued due to -..<>,,,,,,.-tQ indications or conditions being observed during the examination of either Class 1 or 2 components during th the sixteenth 6 ) maintenance/refueling at VEGP-2 (referenced attachments are available at the VEGP for review upon request. as volumetric, surface or visual examinations with indications/conditions exceeding standard of ASME XI, thus "analytical evaluation". Volumetric and surface examinations meeting the applicable ",,..r*<>,..,lt!:l are not considered "reportable", and will not be indicated on the table below.

Visual indications will be included in the table, even if dispositioned as "acceptable". Generation of an "Indication Notification Report" and lor "Condition Report" as specified in the below table does not indicate a Code "Reportable" condition.

INF NO. and/or Affected Component/Area INF Disposition Condition R ort 113V2001 Support 21302-107-H004 R"'t"'r,pnl~'" Condition CR 611390 (IWF) Not per disposition. Condition corrected per MWO SNC475383.

113V2002 Containment Liner Plale /

CR 610528 Level 1 of CNMT near An area of the liner plate was found to have some Personnel Hatch sections on the 220' elevation (Level 1). The area in question is about 7 ft in width and 1 ft in The area is about 7 fI above the floor and butts up the thickened penetration for the Personnel Hatch.

The area in question was broken up into eight (8) one foot square grids and the lowest thickness was found in each grid. The lowest ultrasonic thickness measurement found was 0.213 in and nominal liner thickness in the area of is 0.25 in. This delta a 14.8% loss in nominal liner plate thickness, which is than the 10%

loss of material permitted by IWE-3122.3. From the measurements taken it was found that the area in question cn.A;t::lJlClUIt:: "as-is" using from a

,..,,,,,rr"r*m~.t4 engineering evaluation, REA 99-VAA713. In this the minimal wall thickness for this area is 0.125 in.

The cause for the bulging is unknown. This area will be added to the Vogtle Containment Inspection Plan as an Augmented Examination and will be examined in the 3'd Inspection Period of the Third Interval.

The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC Engineering Programs Department scope of work. With the exception of Steam Generator Tube Inspections any reportable indications or conditions observed by VEGP Site or outside contractors during their scope of work should be identified bylto the VEGP Site in document(s) which are referenced herein. Additional information related to Steam Generator Tube are to be provided in a one hundred eighty (180) days after the initial entry into MODE 4 as required VEGP 5.6.10.

5*1

TABF OWNER'S REPORT FOR REPAIR AND REPLACEMENTS (ASME FORM NIS-2)

OWN REPORTS REPAIRS REPLACEMENTS (FORM NIS-2)

The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-2 since the last maintenance/refueling outage (2R15) through the completion of the sixteenth (2R16). are identified by their traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2 are filed with their traveler at the plant site. Only those NIS-2 reports to VEGP-2 are included in this report document. Any attachments, e.g., code data etc., referenced in the NIS-2 reports will be made available for review upon at the plant site. It should be noted that even though Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the of does not the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement not NIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report.

11105 13011 13023 13074 11110 13013 13029 13075 11111 13014 13030 13076 11112 13015 13032 13080 13000 13016 13037 13081 13002 13018 13038 6 13003 13019 13040 13067 13004 13021 13043 13068 6-1

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'.1-'.1-'-.10.:....5=----_ _ __

1. Owner Southern Nuclear Operating Company Date May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC342588 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VogtJe Expiration Date NlA Address
4. Identification of System 1208/CVCS
5. (a) Applicable Construction Code ASME Sec. /II Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2""O",OC!.1-"e""dc:..'",20""O",3"",a",d""d""._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 14107 NlA V2-1208-047-H604 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 14117 NlA V2-1208-047-H604 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA 112 snubber serial nO.14117 was reelaced PSA 1/2 serial number 14107.
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks .:....S~e~e.:..../~te~m~7_ _ _ _ _ _ _~_~~~~~ _ _~~_~ _________________________________

Applicable Manufacturer's Data Reports to be attached CERnFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

~,\ \,0, Type Code Symbol Stamp NlA o.s\\<\ Certificate of Authorization No. NlA Expiration Date NlA Signed

~ ,\. ~~~-----\M-'-=-'--s-uP-Ee-rin-te-n-de-n-t Date Own~ or Owner's Designee, 1IItie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period II/~ II I to CO /1 ') / i ';' , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions National Board, State, Province and Endorsements Date IS'-;S VIV.: 1.c I ~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACllVITY All Required By The Provlalons Of The ASME Code Section XI Traveler 1# _ _,'-_'_'.:...0_ _ __

1. Owner Southem Nuclear Opsratlng Company Date January 24". 2012 Name 40 Invemess Center Parkway. Blrmln{!!Jam, AL Sheet of 3 Addrese
2. Plant VOgt/a Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC338727 Addreu AepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by _--"M.:.:a"'-Jnt:.:..:ena~nc~e..:;D;.;:epa=rtm=e;;.;nt~- Type Code Symbol Stamp NlA Name Authorization No. N/A Plant Vogt/a ExpIration Date _ _ _ _ _ _ _ _ _ _Nlr.;,..:4_ _ _ _ __

Address

4. Identification of SY8tem 12081 CHEMICAL & VOLUME CONTROL SYSTEM
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1972 Addenda, Winter 1972 Code ease (b) Applicable Edition of Section XI Used for RepalrJReplacement ActlvHy 2001 Eel. thru 2003 Add.

(e) Applicable Section XI Code Caae(a) NlA II. Identification Of Components National Corrected, ASMECode Name of Hameof Manufactu,.,. Board Other Year Removed, Of' Stamped Com~ent Manufacturer Serial No. No. IdWltlflcatlon Built Inatalled (yesOf' No)

VALVE VELAN, INC 750 /IVA 2HV8109 1989 REMOVED YES VALVE VELAN,INC 888405 NlA 2HV81 09 1987 INSTALLED YES

7. Deacriptlon of Work Installfld replacement Viilv9. The install9d valva (SIN 888405) was orIginal/Ypurchased as a spare under PO

-- 8.

PAV-27380.

Teet Conducted: Hydroetatlc Other 0 0

Preaaure PneumatleD Nominal Operating P.....ure[!]

pat Teat Temp. _ _ _ _ _ "F Exempt 0

9. RMna~ _~~_'_n~em~7____________~~~~~--~~~~~=_~~~~~~~-------------------

Applicable Manufacturers Data Reports to be attached CERl1FICATE OF COMPUANCE I certify that the statements made In the report are correct and that thl, confonn. to the requl.-.ments Code, SectIon XI.

0' the ASM!

Type Code Symbol Stamp /IVA Certificate of Authorization No. NlA expiration Date NlA

~+,

Signed ..Q f"t AJVo..J-.. W Do 0.. Date 1-~7-(~

( Owner or OWner's DeeIUh... TItle ~'() .......

V I ,... 2.") -t "2.

CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding 8 valid commlaalon laeued by the National Board of Boller and Pruaure Veuellnapectons and the atate or Province of  !:i§mlSl and employed by HartflJ!11. ~tesm ~~ lnsoect/2l1 fI!Ut lailllacg Q2. Q/. ~~!J1.

of Hartford. Conn9cticut have lnapected the components described In thla Owner's Report during the period ~ - II to ,.,10- 4OJ.~ and state that to the beat of my knowledge and belief, the awner haa performed examinations and taken corrective measunMI described In thl, OWner's Report In accordance with the requirements of the ASM! Code, SectIon XI.

By signing this certificate nelttler the Inspector nor his emplo)'9r makaa any wamutty, expren8d or Implied, concerning the examlnatlone and corrective meaaunMI described In thla Owner's Report. Furthermore. nelther the Inspector nor his employer shall be liable In any manner for any peflOl1al Injury Of' property damage or a 1088 of any kind arising from Of' connected with this In~

~-~ In pector'. ature Com......... ~,2SZ Natonal Board, State, Province and Endonsements Date JQ J"Arl¢~ ~0i.Ql.

- "~''- ' -~~I1< ... ~.or_, ~.-:-,..~... _~_,, _. __ ~ .._,, _ _

~ .

ORIGINA _

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ......;1...;1...;1...:.1...;1_ _ _ __

-:;0.-. 1. Owner Southem Nuclear Operating Company Date May 2,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Voglle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC470929 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name Authorization No. NIA Plant Vogpe Explralion Date NIA Address
4. Identification of System 1208/CVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ -.!2..,O<::O'-'1...:e"'d:,:....2""OO=3-"a"'d"'d...._ __

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 0300 1CS880000 NIA 2-1208-U6-037 NIA CORRECTED YES 0000S74-0034

7. Description of Work Weld encapsulation cap on check valve
8. Test Conducted: HydrostatiC 0 PneumattcD Nominal Operating Pressure[!j Exempt 0 Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks __ S~ee_lt~e~m_7~ _ _ _ _ _ _ _~~~~~~~ _ _ _~_~_~_~ _ _~ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI .

Type Code Symbol Stam~ NIA Certificate of A oh No h--H'JI--~----'-"':"";------- Expiration Date N/A Signed . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comm isslon Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connectfcut of Hartford. Connecticut have Inspected the components described in this Owner's Report during the period O'S-IZ--(-S to "':i-3<.~-1 '3 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the reqUirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arlslng from or connected with this inspection.

~0:::--'i'~",,

' ,-""'~~_--:---:--::-;-----:--

  • _____ Commissions f'2A 13 Z

.. Inspector's Signature National Board, State, Province and Endorsements Date '3DMCI.,;) 201'3

  • " .....'\'.... ... '.'" ....,. ..........

~ ~. - .'

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAlRlREPLACEMENT ACTIVITY As Required By The Provlalon8 Of Tl'Ie ASME COde Sec:tlon XI Traveler # _--:...11:..,:1..:;12=--_ __

1. Owner Southern Nuclear Operating Company Date January 24, 2012 Name 40 Inv~ Center Parkway. Blnningham, AL Sheet of Addl'88ll
2. Plant VogtJe Electric Generating Plarrt Unit 2 Name Waynesboro, GA 30830 SNC338727 Add..... RepalrlReplac:ement Organization P.O. No., Job No., etc.
3. Work Performacl by _--:.:M:.:::8::;.In:.;;tenanc:.:.:::;;==e..=D;.;epa=1tm=en;:.;.:..t_ Type Code Symbol Slamp NlA Name Authorization No. NlA Plant Vogtle ~~D" __________________ ~w.~~~ __________

AddI'8ll8

4. Idantlflcatlon of Syetam 1208 / Chemical and Volume Control System
6. (a, Applicable Conetructlon Code ASME See. III 1974 edition. Summer 1975 Addenda, _---'-N/,""'~_'__ Code Case (b) Applicable !dltlon of Section XI Used for RepalrlReplacement ActIvity 2001 ED. 2003 ADD.

(e) Applicable Section XI Code C'&e{s)

6. identification Of Component.

NatIonal Corrected, ASMECode Hameof Name of Manufacturw Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identlflc8tlon Built Inatalled ev.. or No}

PIPE SYSTEM ENERGY & 442305 /IVA 2K3*1208-003*01 1999 INSTALLED YES PROCESS CORP

7. Description of Woft( Replaced piping around valve 2HV81 09 to install valve 2HV8109, which was installed under Traveler 11110.
a. Teat Conductacl: Hydroatatlc 0 PneumatlcD Nominal OpenItlng Pr...ureD Exempt[!]

Other D Pressure pal Teat Temp. _ _ _ _ _ "'F

9. Rema~ ~S~ee~lt~8m~7____________~~~~~__~~~~~~~~~~~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the Btatements made In the report are correct and that this conforms to the requirements of the ASME Code, section XI.

Type Code Symbol stamp /IVA

- ._ _---:>..,.---_ _Nl._:4________ ExpIratlon Date /IVA SIgned Date /-2J -(7...

CERTIACATE OF INSERVICE INSPECTION I, the undenalgned. holding a valid comml..lon laeued by the National Board of Boller and Preaaure V....llnspec:ton and the lItate or Provlnc:a 01 GeorgIa and employed by Hartford Steam Boller InsDgcUon W losul8/7C6 ~!1}ut of Hattford, Connecllcyt have Inspected the componente deacrlbec:lln thla Own...** Report during the perIod =t=-_~~ II -I.~I to 1-.llJ -~, and state that 10 the beat of my knowledge and bell.f, the OWner flu performed examination. and taken I,~,,~

corrective m"lUrea deac:rlbec:l In thl. OWner'., Report In accordance with the requirements of the ASME Code,Section XI.

By .'gnlng thla certificate neither the Inspector nor hi. employer rnak. . any warranty. expreued or Implied, concerning the examInation. and corrective m..au.... described In thl. Own..... Report. Furthermore, neither the Inspector nor hi' employer etlan be liable In any manner for any personal InJury or property damage or a loa. of any kind ar1.'ng from or connected with thl.

Ins on.

~~~~~~~~~~?f~?!=--__ Commlsalon. 6-& ZS't.

National Board. State, Province and Endorsements

FORM NIS-2 OWNER'S Rg~~~k~ P~REPLACEMENT As Required By The Provisions Of The ASME Code Section XI ACTIVITY Traveler # --:..1.::;30::.,:0:.=0_,,-_ __

1. Owner Southern Nuclear Operating Company Date June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of Address
2. Plant Vogtl6 EleeJn"c Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376393 Address Repalrl Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorizatlon No. NIA Plant Voqt!e Expiration Date NIA Address
4. Identification of System 1208/eVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2:!!O~01~ed!:!.:.....!2~O~O~3~a~dd!:!.:.'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASM.E Code Name of Nama of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 305002351029 NlA V2-120B-068-H021 NlA INSTALLED YES SUPPORT PIPE PULLMAN POWER 14114 NlA V2-1208-068-H021 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-112 snubber serial nO.14114 was replaced with Usega 301856RF2 serial number 305002351029 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 pneumaticD Nominal Operating PressureD ExemptlKl Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~/rem~7 = _ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~ _ _ _ _ _ _ _ _ _ ___

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA

-,-_ _ _ _ _..;..N1..:..A:...;..._ _ _ _ _ _ Expiration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insuronce Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period 3/'?113 to G I I 7/1::;. ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind ariSing from or connected with this inspection.

/;;::..::::..",.,.~

L-,o"'.::""'---  ; " -------- Commissions 7 Inspector's Signature National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:..3-'-00'-2_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 29, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376395 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. WorK Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Vogtle Expiration Date NIA Address
4. Identification of System 12051 Residual Heat Removal
5. (a) Applicable Construction Code ASME Sec. 111 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2:.:0:..:0..:.1..::ed,-=-.:;20",O:..:3. .a",d:.:d::.:.._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 31105271004 NlA V2-1205-004-H01O NlA INSTALLED YES SUPPORT PIPE PULLMAN POWER 1594f1 NlA V2-1205-004-H010 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-10 snubbar serial no. 15946 was replaced with Lisega 306256RF3 snubber serial number 31105271004 to support2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[K]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~/te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~__~~~~~~~ ______________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

-I7-++---.._--Nl.-':4-'-------- Expiration Date NlA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. ConnecUcut have inspected the components described In this Owner's Report during the period n 21 J4/1-s.

to DCe! ! I ! i"3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

?'/_~- Commissions _ _,---..:....G;~""'
  • /A-'-_a..L.?..l..,3~r:z;;...*_ _ _~_ _ _ _ __

~~iI1Spector'SSlgJlatUl" National Board, State, Province and Endorsements Date  !( :s V!\e 2.0 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tmve~r#~1~30~0~3__________

1. Owner Southern Nuclear Operating Company Date June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Un~ 2 Name Waynesboro, GA 30830 SNC376505 Address RepairlReplacement Organlution P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VQ9.l/e Expiration Date NIA Address
4. Identification of System 12011 Reactor Coolant System
6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity __~2~O~01~ed~.~2~O~03~ad~d=::.____

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 26755 NlA V2-1201-03CJ..H605 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 20212 NlA V2-1201-030-H605 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-3 snubber serial no.20212 was replaced with PSA-3 serial number 26755 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[Ej Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=- ___ ~~~ __ ________________

~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section Xi.

o f.,,4

,,0'\'

Type Code Symbol Stamp NlA

+---,:---_ _ _..:.N!.:;.;~...:...._ _ _ _ _ _ _ Explration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 'Z.. /1 Lj / I '?,

to (0/ i 7 /{ 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

---~~ '-7"':'-'",".:::;..--

'_'_/ ...,.2=~-=:.,...~==------. ____ Commissions

~ctor's Signature National Board. State, Province and Endorsements Date 17 '-, U (\ e'0')

--.j L i ..;;,

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .....,:1;.3,::.00=..4.:..-_ _ __

1. Owner Southern Nuclear Operating Company Date May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376508 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. N/A Plant Voglle Expiration Date N/A Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _...:2:.:0:..:0;..:.1-=e:..:d:.:.. . =-20~O:.:3:...;a::.;d:..:d::..:. _ __

(c) Applicable Section XI Code Case{s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serlal .No. No. Identification Built Installed (Yes or No)

PIPE LfSEGA 03615185'27 NlA V2-1301-015-H007 1989 INSTALLED YES SUPPORT PIPE PULLMAN POWER 26940 NlA V2-1301-015-H007 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA 3 snubber serial number 26940 'was raplaced Usega 305253RF3 serial number 03615185'27 to support 2R16 initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD ExemptlR]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ QF

9. Remarks _Se~e~/~ffi~m~7_________~_~~~~~______~~~ ______~ ___~~ ____________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the AS ME

~ Code,Section XI.

~,~\~ Type Code Symbol Stamp NlA
  • _-::-____..:.NJ..=.:A:.:.-___________ Expiration Date NIA Superintendent Date

-;Tltle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDeclion and Insurance Co. of Connecticut of Hartford Connecticut have inspected the components described In this Owner's Report during the period Z./H /{,3 to (2(') /1 ~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

___ -t-,6.,,:;£:..:~:::..<:..---_'

_/.,.,.,..p(.:;,./-:--:-:--,.-_-v--.=....--_._ _ _ _ _ Commissions _:-:-:.,.:\:.../__'<~-A::-'-_~-:-'-:':3::...L<5r'--::_-:--_--:-=-:-- __,---___

/ InspeCtor's Signature National Board, State, Province and Endorsements

ORIGINAL

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ~1-=3..::0..:..1.:...1 _ _ _ __

1. Owner Southern Nuclear Operating Company Date April 24, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC421904 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Slamp NlA Name Authorization No. NlA Plant VogUe Expiration Date NIA Address
4. Identification of System 1301 - Main Steam System
5. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2..,O"'O:..:.1-'e"'d"'-. ,!,2"'O""O~3""'a""d"'d.:...._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 308001251021 NIA V2-1301*139*H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 485 NIA V2-130 1- 139*H004 1989 REMOVED YES SUPPORT

7. Description of Work AD-15fL snubber serial no.485 was replaced with Lisega 303956RF2 serial number 30800/251021 to support 2RI6's inifial test scope.
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt I!]

Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~Jte~m_7_ _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~_~~~ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA tl NIA Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolier and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have Inspected the components described In this Owner's Report during the period Q I / 15/ (3 to O$/O~/13 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this inspection.

_ _L&-:~~  :",-:-*_.,..,.~",,::::.......,

  • ---::,.,.----,-_ _ _ _ _ _ _ Commissions "7 Inspector's Signature National Board, State, Province and Endorsements I Date 08 Mt\.j 2..0 I~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # :.:.......1.::.3.:...01;....:3=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 17, 2013 Name 40 Inverness Center Par1<.way, Birmingham, AL Sheet of Address
2. Plant Vogtle Electnc Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376532 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VO!l.tle Expiration Date NIA Address
4. Identification of System 1302 I AFWI CST Degas
5. (a) Applicable Construction Code ASME S6C. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!!2~O.!!.01~ed~.....!!2:.l10~O.l!..3~ad~d~.'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE USEGA 305003281100 NlA V2-1302-109-H013 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARUNG 362 NIA V2-1302-109-H013 1989 REMOVED YES SUPPORT

7. Description of Work AD-503 snubber serial nO.362 was replaced Usega 305253RC7 serial number 305003281100 to support 2R16's initial test scope .
8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt[g]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ OF

9. Remarks _s~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~_ _ ~~~~_~__~~~~~ _ _ __ __________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

---,!>i--H_.,..-_.:...N!..:...:4:.:......._ _ _ _ _ _ Expiration Date NlA Signed ' u rintendent Date {; cc> 1'~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period [ / i<ples to Gp/I 5?/ / '3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requiremants of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pensonal injury or property damage or a loss of any kind arising from or connected with this inspection.

4-~7.'I .. ~;::'

,.'----- 7<-=-.,...'"-=-------,::-_:_. _ _ _ _ _

"7' Commissions -...,,...,....,.,G~.

.;;:.:;.:,_:_:/~~Cj_:'S~J)'---=__:_-__:_:::__:_--_:_--

/lns~tor's Signature National Board, State, Province and Endorsements Date I)?  :::rV!\f 2C )7)

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'-1."-30.;;..1_4_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 29,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376538 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenan~ Dee,artmant Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Vogtfe Expiration Date NIA Address
4. Identification of System 1204 I Safety Injection
6. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2""O""01.:....:::;ed"'.""2""O"'03""""'ad""d"'.'--__

(c) Applicable Section Xl Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 307005611060 NlA V2-1204-14441607 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 196 NlA V2-1204-144-H607 1989 REMOVED YES SUPPORT

7. Description of Work AD-71 snubber serial no. 196 was replaced with Usaga 301856RF3 snubber serial number 307005611060 to support 2R16's initial test scce,e.
8. Test Conducted: Hydrostatic 0 Pneumatic D Nominal Operating Pressure D Exempt~

Other D Pressure _ _ _ _ psi Test Temp.

OF

9. Remarks _S~e~e~I~te~m~7_ _ _ _ _ _ _~_~~~~~~-~~~~-~~~~-~~---------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certJfy that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

+-H4+l-+-----"---'------- Expiration Date NIA Signed erintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georoia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of HartfolJi Con,necticut have Inspected the components described in this Owner's Report during the period 01//(0//3.

to fOlZ0I(~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

.'~~r~=-* ~_"---:>"~

..~~_ . _ _ _ Commissions ----,-,--Q"-"=~A'"'--,',_C,-+,=-I-S:-'----','b~_~.,_________ _

7~lOSPe~ National Board, State, Province and Endorsements Date 1J:O::SvI\Q,20(i:,

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --..:1..::3.::.0..:.c15=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 17, 2013 Name 40 Inverness Center Parkway, Binningham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376542 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VOfl!.le Expiration Date NlA Address
4. Identification of System 1301 1 Main Steam System
6. (a) Applicable Construction Code ASME Sec, 11/ Edition, 1977 Addenda. Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,!2~O~O.!.1~ed~,-,!2~Q~O::.3~a~dd~,,--__

(c) Applicable Section XI Code Case(s) N-249- 1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (yes or No)

PIPE LlSEGA 307005611052 NlA V2-1301-110-HOO2 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 1211 NlA V2-1301-110-H002 1989 REMOVED YES SUPPORT 7, Description of Work AO-73 snubber serial no,1211 was replaced Usega 301856RC7 serial number 307005611052 to support 2R16's initial test scope,

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating pressureD Exempt[Kj Other 0 Pressure _ _ _ _ psi Test Temp.

OF

9. Remarks _S~e~e~/~te~m~7__________~_~~~_~_ __~_______~_______________________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code.Section XI.

Type Code Symbol Stamp NlA

-&--/-t'-------.,--"-"------------ Expi ration Date N/A Date D'9-0<0/3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co, of Connecticut of H8rt1ord, Connecticut have Inspected the components described In this Owner's Report during the period I 1 I (iC'113 to (P/I '-) 1 13 , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance w ith the requirements of the ASME Code, Se<;tion XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

___-L.:~~.2!: '-'.:....~

-:?-':;?

~' ----- Commissions 7 Inspector's Signature National Board, State, Province and Endorsements Date I 'J "3 V n<£':- 7.t) I~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1-"3-'-0_16-'-_ _ _ __

1. Owner Southern Nuclear Operating Company Date April 26, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376544 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vog.tle Expiration Dale NIA Address
4. Identification of System 1301- Main Steam System
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda , Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _--"2..,O",O,-,1...,e.,d'-'..-"2~003=-,,ac>::d,,.d.:..-._ _ _

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 312008131027 NIA V2* 1301-127*H071 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 1190 NIA V2-1301*127*H071 1989 REMOVED YES SUPPORT

7. Description of Work AD-71 snubber serial no. 1190 was replaced with Lisega 30 1856RF3 serial number 312008131027 to support 2R16's initial test scoe.e.
8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating pressureD Exempt[j Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7~ _ _ _ _ _ _ _~~~_~_~ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI .

Type Code Symbol Stamp NIA

-i'.Lfi--....___N.c..::..:.VA.:......_ _ _ _ _ _ Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Insoection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 02,//'$//"3 to DS/OI // 3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

--~--'~~or_=---;--~..:;.o""'-~::_:_-~------- Commissions GIl 933

' - "' , 7

  • iflSPectof'SSi9flature Nationai Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --'1..:;3..:;0.;..18"--_ _ _ __

1. Owner Southern Nuclear Operating Company Date April 26, 2013 Name 40 Inverness Center Parkway. Birmingham, AL Sheet of Address 2, Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376548 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vog.tle Expiration Date NIA Address
4. Identification of System 1301 - Main Steam System
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2.,O",O"'1..."e"'d:..:....::2""O""O"'3"'a"'d""d.:.-._ _

(c) Applicable Section XI Code Case(s) N*249*1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 30700491 I 116 NIA V2-1301-126*H031 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 504 NlA V2*1301-126-H031 1989 REMOVED YES SUPPORT

7. Description of Work AD-153 snubber serial nO.504 was replaced with Lisega 303856RC7 serial number 307004911116 to support 2R16's initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating pressureD Exempt[Rj Other D Pressure _____ psl Test Temp. _ _ _ _ _ _ DF
9. Remarks _S~ee~lt~em--,7--, _ _ _ _ _ _ _~~~~~_~ _ _~~_~ _ _ _~_~ ____________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA t---:-_____N_JlA_ _ _ _ _ _ _ Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described In this Owner's Report during the period 01//(0/13 to 05"/0 i/l]l , and state that to the best of my knowledge and bellel, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss 01 any kind ariSing from or connected with this inspection.

---,~>""'::~~~-~==----:,...~'V-__.,_---=------------ Commissions

/ TnSj)6Ctor'SSignatUre National Board, State, Province and Endorsements Date 01 MA. WI3 J

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_30--"9_ _ _ __

1. OWner Southem Nuclear Operating Company Date May 28,2013 Name 40 Invemess Center ParKway, Birmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376549 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name AuthOrization No. NIA Plant Vog.t'e Expiration Date NIA Address
4. Identification of System 1301- Main Steam System
5. (a) Applicable Construction Code ASME Sec. III EdItIon, 1977 AddQnda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2.... 0:..Q1.:...e"'d=:;.-=2:=O""03::....::;ad,.,d""._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 30500263136 NlA V2-1301-136-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 490 NlA V2-1301-136-H004 1989 REMOVED YES SUPPORT

7. DeSCription of Work AD-153L snubber serial nO.490 was replaced with Lisega 303956RC7 serial number 30500263136 to support 2R16's initiel test scope .
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks See Item 7

~~~~-------~A-p-pl~lca~b7Ie~M~a-n-Ufa~ct~u-r-e~r8~D~a~ta~R~e-p-o-rts~t~o~b~e-a~tta~c~h-e~d------------

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

~~ Type Code Symbol Stamp NlA

-DoL1h1ll---..,...-_ _Nl._:4_ ______ Expiration Date NlA Signed' Date si~81l3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NatIonal Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart1ord, Connecticut have Inspected the components described In this Owner's Report during the perIod 01/ i (o/{ '3 to 0(£/(0113 , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pel"9onal injury or property damage or a loss of any kind arising from or connected with this inspection.

.~""""'~-:---"/;..=~-:--::-:----:----- Commissions S -=-3--=..<<S--,-----_--=---:----_ __

  • , Ii-,--'*-,-

_---->....:::C=-:..L Inspec~to ...s I Signature N atlonaI Boa rd , State, P rovlnce ' an d End orsements Date /0 "1 u !\.(.lD I .~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'.1..:.3-'-02;;..1'--_ _ __

1. Owner Southern Nuclear OperaUng Company Date May 30, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376560 Address Repair/Rep/acement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NIA Plant VOQtle Expiration Date NIA Address
4. Identification of System 1301 I Main Steam System
5. (a) Applicable Construction Code ASME Sec. fII Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....::2"'O"'-01.:..=ed"".....2""OO:z.3"-'O.ad""d".,._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE ANCHOR DARLING 224 NlA V2-1301-104-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 245 NlA V2-1301-104-HOO2 1989 REMOVED YES SUPPORT

7. Description of Work AD-5503 snubber serial no. 245 was raplaced with AD-5503 serial number 224 to support 2R16's initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[Ej Other 0 Pressure psi Test Temp. _ _ _ _ _ _ OF
9. Remarks _S~e~e~/~te~m~7_ _ _ _ _ _ _~__~~~~~~_~~~=- ____~__~___________________

Applicable Manufacturer's Data Reports to be attached

. CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

,,0, Type Code Symbol Stamp NlA

~ ~~

olJ..."" Certificate of Autho~~atio~NO~ \.________-'-N/,.:;.~_'_________ Expiration Date NlA Signed v\* \;;;'~.r" b Superintendent Date _~.......1.\.l..n""""\.l..n~___

Owne~r Owner's Designee, 'tItle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Geomia and employed by Hartford Steam Boiler InliPection aiJSJ Insurance Co. of Connecticut of Hartford. Connecficvt have Inspected the components described In this Owner's Report during the period (') ' / /{/ / / "<

to e(e /2 ;:./ i " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the Bxaminations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a IOS5 of any kind arising from or connected with this inspection.

~ ________ ~~- Commissions ---:~C::_---.-,,' A

~---,:-9 -:;:3'.,--:-<<,'---=----:-_---:--=-:--_--:-_ ___

_~s S i g n a t u r e . National Board, State, Province and Endorsements Date 25 :Jl.'l\f LC 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--:.1..::.3.:.;02::.,:3'--_ _ __

1. Owner Southem Nuclear Operating Company Date June 01, 2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electn"c Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376567 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance De£!.artment Type Code Symbol Stamp N/A Name AuthOrization No. N/A Plant Vogpe Explrallon Date N/A Address
4. Identification of System 13021 AFWand CST Degas
6. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _""2..,O",,O:.:.1...::ed==- . .:.20""O:..:3,-,a~d""d::.._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE USEGA 306006571124 NlA V2-1302-109-H025 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 672 NlA V2-1302-109-H025 1989 REMOVED YES SUPPORT

7. Description of Work AD-1603 snubber seriel no 672 was replaced with Usege 306256RC7 serial number 306006571124 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating pressureD Exempt[Rj Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Rema~s ~S::..:e::..:e~/~le~m~7_ _ _ _ _ _ _ _~_~~~~~ _ _~~_~ _ _~ _ _~__~ ___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA h4t-h'--_ _ _-'-Nl..::..:....::4_ _ _ _ _ _ Expiration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hertford Steam Boiler Inspection end Insurance Co. of Connecticut of Hertford, Connecticut have Inspected the components described In this Owner's Report during the period r) / /1 ft* 1/'3 to 0(",/11 /13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

__L-b-:>.~:6-"~==-:

  • -~r_~*

.d-"__:_

  • --=:-~~:-_-_ . ___ !l~~~

Commissions ---:-.-G,:,:,"---,,,,,,

- ,-()':-'-?5"~__=____:--:_=__:_ _ __:_---

7 '" Insf5eCtOf'SSignature National Board, State, Province and Endorsements Date II :IIWe.. 20) :3

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..;,.3.:...02.;..9'--_ _ __

1. OWner Southern Nuclear 0pereting Company Date May 10, 2013 Name 40 Inverness Center Parkway, Binningham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30B30 SNC3765B2 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NIA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. /JI Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...:2"'O... ed""...:2"'

01........ . O"'O,.,3..,a""dd""'-

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE ANCHOR DARLING 752 NlA V2-1208-002-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 750 NlA V2-1208-002-H004 1989 REMOVED YES SUPPORT

7. Description of Work AD-41 snubber serial no. 750 was replaced AD-41 serial number 752 to support 2R16's augmented test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD ExemptlK!

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Rema~s ~S~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~___~~-~--~~-~-------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA NlA NlA Signed rintendant Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period I /i (oil "]

to ( 1/1! / 1:3 , and state that to the best of my knowledge and belief, the Owner has performed exam inations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

~/~-_________ C I '

--7~;;40:"':':::"---'I-ns7)p""e""c..,.to-r'..,.S-=S:-lg-n::.a-:-tu-r-e-------- omm sSlons National Board, State, Province and Endorsements Date 1\ -:}uf\e ZCt3

ORIGINA FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1..:;3~03::..;0,-- _ _ __

1. Owner Southern Nuclear Operating Company Date May 28, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376584 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogt/e ExplraUon Date NlA Address
4. Identification of System 1301/ Main Steam System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Sect/on XI Used for RepalrlReplacement Activity _""2""O""Oc.:.1,."e",,d,,-... 20""O",,3<.,:a,.,d,.,d..._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 312008131024 NlA V2-1301-109-H002 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 697 NlA V2-1301-109-H002 1989 REMOVED YES SUPPORT

7. Description of Work AD-73 snubber serial nO.697 was replaced by Usega serial number 312008131024 to support 2R16's augmented test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[E]

Other D Pressure psi Test Temp. OF

9. Remarks ~S::..;e~e~/~te::..;m~7__________~__~~~~~ _ _~~~~__~~~~~_~_________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp , NlA

_ _ _ _ _ _ _.;..N1.::..;I4..:-_ _ _ _ _ _ _ Expiration Date NlA Signed

/

Date -5/a:r/ /3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford Connecticut have Inspected the components described in this Owner's Report during the period 01/1(,,/13 to 0(', 110/ 13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

-;:;~-~-

~~~~'~I~ns~pe--c-to~r~'s~S~I*g-n-a-tu-r-e------------

Commissions ('~ A ~:3 g

--~N~at-I~~I~B~~d~S~ta~t~P~~*~--~d~E~d~-----ts--------

ona oar,

  • e, rovmce an n orsemen Date IC::s"v/le-ZO 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #I --,1..:;3~03=-=2=--- _ _ __

1. Owner Southern Nuclear Operating Company Date May 10, 2013 Name 40 Inverness Center Parkway, Birmingham. AL Sheet of Address .
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376585 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee!:!.rtment Type Code Symbol Stamp NIA Name AuthOrization No. NIA Plant VOfl.tle expiration Date NlA Address
4. Identification of System 13011 Main Steam
5. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2""O,!<01.:..=ed"".....,2""O"'Q""3.,.a".dd"".'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 312008131029 NJA V2-1301-"'-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 695 NJA V2-'301-'1'-H002 1989 REMOVED YES SUPPORT

7. Description of Work AD-73 snubber serial no.695 was replaced Lisega 301856CR7 serial number 312008131029 to support 2R16 's aUfl.mented test scope.
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt~

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~S=-=ee~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~-~~~~~-~-------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NJA Certificate of Auth NJA Expiration Date NJA Signed Superintendent Date nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Stlism Boillir Inspection and Insurenr;e Co. of Connecticut of Hartford: Connecticut have inspected the components described in this Owner's Report during the period I liC" /I]?

to &71~ 213 ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or B loss of any kind arising from or connected with this Inspection.

---'~~::::.-~---,.-/<T;---7~rt_

. ~~::__::..,-----_  ::::-'::=-A!.:-=:-(1.l......=:3:,-CO'~_=---:--_--:-=--:--_--:- ___

7Tns~'Yo'r'SSignature

__ Commissions _,.,.-G National Board, State, Province and Endorsements Date Ilj ~ Jf\.P ZQ \ 3

L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1.::.3~03:.:7_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 11, 2013 Name 40 Invemess Center Parkway. Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Weynesboro, GA 30830 SNC446714 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NIA Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2'-"O.:.01..:....::.ed"'.'-'2...00=3-=a""dd"'.:.--_=-.....;..;~-

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL 00-63 NlA 2HV3016A NlA CORRECTED YES

/NTERNA TIONAL

7. Description of Work Replace Gate on 2HV3016A
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressure[R] ExemptD Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _See~~/~re~m~7__________~_~~~~~~_~~~=- ~~~~~ ~ __ __ ______________________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Sta NlA

-hlf-llf----..:..N!,:.:}:\-'-------- Expiration Date NIA Signe . uperintendent Date 6'/dO IoV13 CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Geomle and employed by Hartford Steam Boiler Ins!)8ction and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period . 3/1'\ / J ~

to c;. /'2- $'11 J. . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer Shill' be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

/"

?~~ Inspector's Signature Commissions _:'!'f"'":*~:'-

, A~,...:9::::.~c::..,.-'?:--::--:-:---=-~_----:-:=--~--:----

National Board, State, Province and Endorsements Date z..s -:J \/.'\ .. 2 D I ~

1. Owner Southern Nuclear Opera ling Company ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Date Traveler it ---'1-=3..:.0-=.38.:......_ _ _ __

May I, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446715 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Voglle Expiralion Dale NlA Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _~2~O~01"-",ed"".~2~O~03::!....!!.ad~d",,._ _  ::::----'-'-=---

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL OE-78 NIA 2HV3026A NIA CORRECTED YES INTERNA TJONAL

7. Description of Work Rep/ace Gate on 2HV3026A
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating Pressure[R] ExemptD Other D Pressure _____ psl Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~l/-=.em~7---, _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA H+-_---:;o..--_ _N_YA_ _ _ _ _ _ _ Expiration Date NIA Signed Date 5lC't(L~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BOiler Insoection and tnsurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3 I 3 to CXr,- 0' \:, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions

.- I Date ii1;pector's Signature OL(JUf\¢., -; 0 /,3, National Board, State, Province and Endorsements

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..........;1..:;3.,:.04.;..0'--_ _ __

1. Owner Southern Nuclear Operating Company Date May 1, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446717 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NlA Name AuthorlzaUon No. N/A Plant Vogfle Expiration Date N/A Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2",O",-01.!...!Ced",.-=2",O:,:O:::.3.=.a::::;dd",.,--_:::--'-'-=--

(c) Applicable Section Xl Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL OC-11 NIA 2HV3006B NlA CORRECTED YES INTERNA T10NAL

7. Description of Work Replace Gate on 2HV3006B
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating pressure[!] ExemptD Other 0 Pressure psi Test Temp. _ _ _ _ _ _ *F
9. R~arks ~S~e~e~/~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=----~~--~------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

N/A

+/--hH-....c;,;:c--.;...:;.;-'------- Expiration Date NlA Signed -f-~=-"""--"_'_':!:'-¥-~-:::.=':..:-:""--~..,..L-::..:u:.<O.pe:..:.nc..c*nt:..:..:en.;.::d..:..;en~t Date$/df /13 CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Conneciicut have inspected the components described in this Owner's Report during the period Q3/ 1"1 / I ;'

to OG(/ 0/13 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken cOl'Tective meaSures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectlon.

___~U~~=.......,,...*..:;.e=L---:

  • ~---:---=:7----:- _______ Commissions

/~ Inspector's Signature National Board, State, Province and Endorsements Date i(' "0 i wi? 20 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY Ae Required By The Provisions Of The ASME Code Section XI Tmv~#~1~304~3~________

1. Owner Southern Nuclear Operuting Company Date June 11, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of 1 Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446720 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenanoo Department Type CO<kJ Symbol Stamp NIA Name AuthorIzation No. NlA Plant Vogtle ExpIration Oats NIA Address
4. Identification of System 1301 I Main Steam
6. (a) Applicable Construction Code ASME Sec. til Edition, 1977 Addenda, ____'-"N..:;. O___

(b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2"'0c::.01....... ed,.,.....20=03=-=add.....,.'--___

(e) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name Component 0' Name of Manufacturer Manufacturer Serial No.

Board No.

Other Identification Year Built Removed, or Installed Stamped (Yes or No)

VALVE ROCKWELL OG-06 NIA 2HV3036B NlA CORRECTED YES INTERNA TlONAL

7. Description of Work Replaoo Gate on 2HV30368
8. Test Conducted: Hydrostatic 0 pneumaticO Nominal Operating Pressure[Rj Exempt 0 Other 0 Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ oF
9. Remarks ~S~~~I~w~u~/7~___________~~~~~--~.~~~~~--~--~~~~~--------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE Of COMPLIANCE I certify that the statements made in the report are correct and that this confonns to the requirements of the ASME Code,Section XI .

Type Code Symbol Stamp NlA Certifi~o. /IVA Expiration Date NlA Signed ~~1l.1'Ut4. 4>e..; Superintendent Date lr/1' 2{) j"$

Owner or Owner's Designee, Tltie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission i&sued by the National Board of Boller and Pressure Vessel Inspectors and the atste or Province of Georgia and employed by Hartford Swam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period '2. / i"l / l -S to Q/I')/13 , and state that to the best of my knowledge and belief, thit Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the AS.ME Code, Sectlon XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impl~d, concerning the examinations and corrective measures described In this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

_ _ _-'o ~_  ?---"

" /~~-=_-:--_. _ _ _ _

_7 Commissions ~:-:-:-:-,f_:.~A::-<-S-,-:.;.:::3:-:-,,"

  • ~ * --::---::--_-:-=-:-_ _-:--_ _

7tOSPe6tor'a Signature National Board, State, Province and Endorsements Date La/h ! i :3

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tra veler # --'1..;.3..;.0.;,.53-=----_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 2. 2013 Name 40 Inverness Center Parkway. Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 30B30 SNC470969 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorization No. N/A Plant Vogtle Expiration Date NlA Address
4. Identification of System 120B / CVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _..::2""'OO><.1'-e::.:d.:....~2""QO""3~ad~d.:...._ _ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CSBBOOOO NIA 2* 120B*U6*03B NIA CORRECTED YES 0000

7. Description of Work Weld encapsulation cap on check valve
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressurn[Rj ExemptD Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7~ ______ ___~~~~~_~____~~__~ ____~___~~ ______________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NI A

/"J-_..".-_ _ _-:N..;;,V.,:..;I'I:....._ _ _ _ _ _ Expiration Date NIA Signed Date 5 *.,j'j"- { .3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, ConnectiC(jf have Inspected the components described In this Owner's Report during the period Q 3 / 1 "S /1 ;:,

to 0(,,/0</ / [ ~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reqUirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

~~

7 Inspector's Signature Commissions _-:-:-":-(.""~,'-"A':-::--'~'_3"7-:Z~7__:__=_~:__-___:"'=_:__--_:__--

National Board, State, Province and Endorsements Date 0 '1 ::fUM LC I 3

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME C~de Section XI Traveler # -.:.1;::.30:.,:5:..;.7_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 11, 2013 Name 40 Inverness Center Pa.rkway, Birmingham, AL Sheet 1. of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC456322 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by MaintenanC8 Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Explnrtlon Date NIA Address
4. Identification of System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Acldiinda, W 1972 add.

(b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _..!2:!!O~O.1..1.xed~.~2~OO=3..ea~dd~.,-__

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Correeted, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PUMP WESTINGHOUSE 4-9744D35G01 NlA 21201P6002 NlA CORRECTED YES

7. Description of Work Replace the Rep S1381 par;kaga.
8. Test Conducted: Hydrostatic 0 PneumaticO Nominal Operating Pressure~ Exempt 0 Other 0 Pressure psi Test Temp. _ _ _ _ _ "1=
9. Remali!s -'S::,:OO=.,:/.:.:te::..:m.:....:....7_ _ _ _ _ _ _-::--::--:-.,..--::::---::---:_

Applicable Manufacturers-Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certlflcata of Authorization No. NlA Expiration Date NlA Signed \r. t ~L\Jk\

Owner ori>Wner's Designee, T tie

~ Superintendent Date ~ ) \ \ h~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler /nsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components de$crlbed In this Owner's Report during the period -z../C:G::'/; :3 to (£/I'l/i "> , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measul'&s described In this Owner's Report in accordance with the requirements of the ASME Code, Sectlon XI.

By signing this certlflcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

'~'-; .""> ~""v-~-.-pec

...~""~to'--r'-S *-=s-Ig....;;n-a-tu-I'&-*- - - - Commissions --;-N:-at-::lona-,"b"':;:.::,I:'-Oa--J..J.rd7':"'.:s~~":te-,-:p::-ro~vi:-nce--a-nd-:-::E:-nd"';'o-rs-em-e-nts:-----

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=,3,:..060::..::..._ _ _ __

1. Owner Southem Nuclear Operating Company Date June OS, 2013 Name 40 Invemess Center Parkway, Binningham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Un~ 2 Name Waynesboro, GA 30830 SNC376568 Address RepairfReplacement Organization P.O. No., Job No., etc.

3, Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name AuthOrization No. N/A Plant Vogtle Expiration Date NIA Address

4. Identification of System 1201 - Reactor Coo/ant System
6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrfReplacement Activity _....:2"'O""01.:....:,ed"".""2""O""O""3.::.a;::;dd"".'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PAUL MONROE 913 NlA V2-1201-86-002-S006 1989 CORRECTED YES SUPPORT

7. Description of Work Replace control valves on snubber
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[!J Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~lte~m_7_________~__~~~~~________~=- _____~__~_~___________________

Applicable Manufacwrer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

(l."-& Type Code Symbol Stamp NlA O "-'oSJ\\

N/,'1'1A . I Explrat on ateO N . "/1'1A Signed

\"."

rintendenl Date 6 -9 -O?Qr~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boifer Inspection and Insurance Co. of Connecticut of Hf!l!;0rd Connecticut have inspected the components described in this Owner's Report during the period 03./Q7/1 ~

to _/11713 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection .

. --?~-

c,...~:;;;;.<~~--.,...~c:;..::==_--=---------- Commissions Z~r'S Signature National Board, State, Province and Endorsements Date II 10{\".2013

ORIGIN FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --clc..::3c.::0..:.6.::.3_ _ _ __

~ 1. Owner Southern Nuclear Operating Company Date May 2, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC470B63 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Voqtle Expiration Date NlA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. Iff Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...,2",OO.::<..!..1-"e""d,-,.2..,O",O",3,->a""d""d",._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CS880000 NIA 2* 120B*U6-036 NIA CORRECTED YES OOOOS74-0036

7. Description of Work Weld encae.sulation cae. on check valve
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureOO ExemptD Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S.::.ee~~/t~em~7_ _ _ _ _ _ _ _~~~~~_~~_~~_~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ ___

Applicabie Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate (\' ' AI----,,_----.:..N.;;;yA;.;....------ Expiration Date N/A Signed Date 5/1/13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3./,-;,,113 to o(p/C~I/ i 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

~~- .-.------.- Commissions _ _ -,=:-:::;:A.:..

~ fI--'--(..l.}-,3,,----,,'i{,-- _ _,--_ _ _ _ _ _ _ _ __

7 ' Inspector's Signature National Board, State, Province and Endorsements Date 0 4:S LHI{?, zC 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--'1.c:3.c:0,;:.64.;...._ _ _ __

~ 1. Owner Southern Nuclear Operating Company Date May 2,2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address

2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30B30 SNC470599 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name Authorizalion No. NIA Plant Vog,tJe Expiration Dale NIA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _""2""OO=."1....:e""d""...:2""OO=3,.,,a"'d"'d"'-._ _ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or NO)

CHECK VALVE WESTINGHOUSE 03001 CSBBOOOO NIA 2-1208 -U6-035 NIA CORRECTED YES 0000S74-0035

7. Descrlptlon of Work Weld encapsulation cap on check valve
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureOO Exempt 0 Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks ~S~e~e~/~re~m~7__________~_~77~~~_ _ _~~~~_ _~_~~_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the reqUirements of the ASME Code,Section XI.

Ie"" \~

\

Type Code Symbol Stamp NlA 1,\" /-zIl-_____-'-Nl..:..:...;A_ _ _ _ _ _ Expiration Date NlA Date 5f9/B CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of GeorQia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ~J~--,(.. *3... _-,-1.::::3'---:---:-_1 to <0-1'8 -1:S , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection.

r Date

/~~-

Inspector's Signature cell ~ /2t? i 3 Commissions National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_3_0.;;,.66'-_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 17, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vagtie Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC343656 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VogUe Expiration Date NIA Address
4. Identification of System 120B/CVCS
5. (a) APplicable Construction Code ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2~O~O~1....:!e~d~. .!:2~O~O)!.3~a~d~d.!-._ _ _

(c) APplicable Section XI Code Case(s)

6. Identification Of Com ponents National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CS8BOOOO NlA 2-1208-U6-037 NlA CORRECTED YES 0000574-0034

7. Description of Work Replace components on check valve.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureOO ExemptD Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7_ ________~~~~~_~ _ _~~_~ ____~~__~~ _________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol 5t N/A H'+ift---,r-_--'-N:;..;VA..:...._________ Expi ration Date NlA Signe ,Superintendent Date 6'/020 l~13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart10rd~COnnecticut have inspected the components described in this Owner's Report during the period Q1/"1 / (~

to WZ.<p~13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~/~ Commissions _-"t=~,,:,-' !l-'--~()-:-:s=-'75_,..--____-:-___:_::__:_-----

~ Inspector's Signature National Board, State, Province and Endorsements

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --,1..::3.::.06;::7~ _ _ __

1. Owner Sou/hem Nuclear Operating Company Date May 7, 2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of 1 Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC472922 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VogUe Explratlon Date NIA Address
4. Identification of System 1305 / Condensate and Feedwater Syst9m
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2",O",OC!.1.."e",dc:...'.20",O,.,3,-,a",d",d~

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE ANCHOR DARLING E9001-97-8 NlA 2-1305-U4-077 NlA CORRECTED YES

7. Description of Work Replac9 hinge pin stud cover and nut
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure Test Temp. _ _ _ _ _ _ oF

- - - - psi

9. Remarks _S;::e~e~/~re~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~_ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol S)/if NlA Certificate 0

  • I r[,f7n-.,.......,~-_---'N!...:.;..;:4~- _ _ _ _ Expiration Date NlA Signe 1-/ ' rintendent . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Confl6Cticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period Q 3./H I ( -:)

to Q::,-/;"o/; 3. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

/"~~----

~

---,s,-:&~:.c:_::--:7'.z".z.z,-",,~::...-~-:-

~-::-:-_~_ _ _ _ _ _ _ Commissions

- ~ Inspector's Signature National Board, State, Province and Endorsements Date 30Mo-j 2013

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---o1,.:c3.:..06;:.;8:..-_ _ __

--... 1. Owner Southern Nuclear Operating Company Date May 9,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC469288 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3, Work Performed by _ _;.;,M;.::a;.;,in;;.;te:.;,n:..::a""n=.;ce::..::;Da""pc8:.:.rt.::,m:;.;e:.;,n;.;,t__ Type Code Symbol Stamp N/A Name Authorization No. N/A Plant VogUe Expiration Date _ _ _ _ _ _ _ _ _ _ _N._VA _ _ _ _ _ __

Address

4. Identification of System 120B/CVCS 5, (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _..:2"'O""01..:....>:.ed"'.""2""O""O=.3""a""dd"'.'--__

(c) Applicable Section XI Code Case(s) 6, Identification AOf Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE FISHER 9318722 NlA 2FV0121 1985 CORRECTED YES CONTROLS

7. Description of Work Replace valve stem / plug assembly
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt 00 Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks ~S.:..ea~/:.::te:.:.m~7_ _ _ _ _ _ _~_~~~~~~__~~-~--~~-~~------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N1A

,W*_-,-_ _..;..N!..;;.;~.-_ _ _ _ _ _ Expiration Date NlA Date c'i Idc:L/d) 0 1.3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BoNer Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 03 ' 1:S to 0<9 **0 2-* 13 , and state that to the best of my knowledge and belief, the OWner has performed examinations and taken cOrl'9Ctive measures described in this OWner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspe*ctor nor his employer makes any warranty, expressed or implied, concemlng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this InspecUon.

--c2~_;,.,

7/ . ~_.~-,/-n**s-~:rl"S

.; ;.~-c:-=-: ~ -

ct...o" -:r'/:. s7-: *s,.,.ig-n-a. .;t- - - - u: :re~----

- Commissions _.,..,...~{-_~"".,-1f~_°..L7-,:~\L.S<'.u.,=---:-__

National Board, State, Province and Endorsements

-:--=-:-_ _-:-_ __

Date n 7 ::s \lAc::. 70 (-S

ORIGINAL

. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:.3.:..0_74_ _ _ __

1. Owner . Sauthern Nuclear Operating Company Date May 28. 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant U~t 2 Name Waynesboro, GA 30830 SNC135383 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Depertment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VogtJe expiration Date NlA Address
4. Identification of System 12011 Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. /JI Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repalr/Replacement Activity _-=2",O",-01.:..=,ed""...,2:.::0",O""3..::a",d",,d:..._ _

(c) Applic.able Section XI Code Case(s): 1484-3, 1528*3. and N-474-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

S TEAM WESTINGHOUSE GBGT*1982 NlA 2*1201*86-003 1982 CORRECTED YES GENERATOR

7. Description of Work Install mechanical tube plugs in tube location R56*C82 (Hot and Cold Leg Side)
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD ExemptOO Other D Pressure psi Test Temp.

OF

9. Remarks ~S~ee~~/re~m~7______________~~~~~__~~~~~~~~~~__~~~_______________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

!l. Type Code Symbol Stamp NlA

~<;># NIA ol,~ rY----,_----Nl.-;I\---------- Expiration Date Signed rintendent Date 5/;2Rf ~3 CERTIFICATE OF INSERVICE INSPECTiON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by HfJrtfSl1'SL s.mam Boiler InsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components desCribed in this Owner's Report during the period 0':)/1<\ / I :>

to rxRlwl 1';' , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctIve measures described in this Owner's Report. Furthennore, neither the Inspector nor hIs employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_---<?::;..".

.~

-:-.r/.;...,-.....?

~'"'<:::....-~-:--:--:----:_:__.,:_

~ - ._______ Commissions 7" '~tor's Signature National Board, State, Province and Endorsements Date ( C:S';/if Z/) 13 i

\~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ........;1..:.3.;;.0'-'75=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 28, 2013 Name 40 Inverness Center Parkway, Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 SNC135383 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NlA Name Authorization No. NIA Plant Vog,tle Expiration Date NlA Address
4. Identification 01 System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition 01 Section XI Used for Repair/Replacement Activity _-<2~O::::O:..!1-,e""d"".-"2:!,O::<O",3-"a."d",,d,-._ __

(c) Applicable Section XI Code Case(s): 1484-3. 1528-3. and N-474-1

6. Identi1ication Of Components National Corrected, ASME Code Name of Name of Menufacturer Board Other Year Removed, or Stamped Component Manu1acturer Serial No. No. Identification Built Installed (Yes or No)

STEAM WESTlNGHOUSE GBGT-1983 NIA 2-1201-B6-002 1983 CORRECTED YES GENERATOR

7. Description of Work lnstaJ/ mechanical tube e.lugs in tube location R15-C60 (Hot and Cold Leg Side)
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~lt~em~7_ ___________~~~~~__~____~~~=-__~_~~~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA

't'\~ +Ai-_-=-_____N!.~;4"--_________ Expiration Date NIA rMt}\\~

Signed Superintendent Date 6'" -dO -&0 1:5 itle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InSD8ction and insurance CD. of Connecticut .

of Ha/ford. Connecticut have inspected the components described in this Owner's Report during the period 3/B/} :5 .,

to Jz /1-5 /, '> ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions GA 93[

~~ National Board, State, Province and Endorsements Date Z. S 'J,) ~e-lO , :)

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'1.,:;3.:;.0,;..76=-_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 12.2013 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC474685 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance D(}Rartment Type Code Symbol Stamp NlA Name Authorization No. NIA Plant Vog,tle Expiration Date NlA Address
4. Identification of System 1205 I Residual Heat Removal
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Addenda, Winter 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity __-'2..,OO:.l<...!.1,.,e",d:..:,.""2"'O""O"'3,."a""d""d,:....___

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

RELIEF VALVE CROSBY VALVE & N56904-00-0036 NIA 2PSV8708B 1977 INSTALLED YES GAGE CO.

RELIEF VALVE CROSBY VAL VE & N56904-00-0017 NIA 2PSV8708B 1975 REMOVED YES GAGE Co.

7. Description of Work Reliel valve serial nO.N56904-00-0017 was replaced by relief valve serial no N56904-00-0036 as part 01 a mandatory scope expansion. The replacement relief valve is a rotating spare
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressurelKJ Exempt 0 Other 0 Pressure NOP psi Test Temp. NOT OF
9. Remarks _ _______________~__________~______~__~______________~________________________

_S~e~e~lt~em----'7 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Syrnb NIA

-...,t--=-_______N.:...::.:.VA~___________ Expiration Date NIA Si Superintendent Date 6/~'2(&?§ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of HartfXnnecticut have inspected the components described in this ?wner's Report during the period I?3(Zl//3 to c4LZr3> ,and state that to the best of my knowledge and behef. the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~

/ " /l C:~ '? r /

Commissions ___..loL_<:<l-f'-1T'__..J/L....<.:j~u~-=-__,..-_______--:-_____________

Inspector's Signature National Board, State, Province and Endorsements Date .

00/2&/2.0/3

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=.3.:,;08;.,:0'--_ _ __

1. Owner Southern Nuclear Operating Company Date June 17,2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogt/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC475946 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NIA Plant VogUe Expiration Date NIA Address
4. Identification of System 1301 I Main Steam System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1974 Addenda, Winter 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ .....2..,OO'-'<-!1,..,e.,d"'.-=2"'O""O"'3"'a""d""d.:.-._ __

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE FISHER CONTROL 9390783 NIA 2HV13005C NlA CORRECTED YES Co.

7. Description of Work Replace components on valve.
8. Test Conducted; Hydrostatic 0 PneumaticD Nominal Operating pressureD Exempt[R]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ *F

9. Remarks ______________~_~~__~____~~__~______________~_______________________

_S==ee~/t.=.em~7 Applicable Manufacturer's Data Reports to be aHached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certifi ____________----'-__________ Expiration Date NIA Superintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boller Inspection and Insvrance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 3/'Z.7/j;'

to W 14 / (~ . and state that to the best of my knowledge and belief, the Owner has performed exami nations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions ___-'"h,..:4t'-1-l-*__S....L:.:::5~~::....-----:---~:----c,--------

National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..--'1.,;.3,;..08::..1'--_ _ __

1. Owner Southern Nuclear Operating Company Date May 7.2013 Name 40 Inverness Center Parkway. 8irmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 SNC377580 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VogtJe Exp[ratlon Date NlA Address
4. Identification of System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2",O~01~ed~.,-"2""O,,,,03~ad~d~.,--__

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STEAM WESTINGHOUSE 120-G8G T*1984 NlA 2-1201-86*001 1984 CORRECTED YES GENERATOR

7. Description of Work Rep/ece hot leg (HL) primary manway studs #7 & #8 on Steam Generator #1
8. Test Conducted: Hydrostatic D Pneumatic D Nominal Operating PressureD Exempt~

Other 0 Pressure _ _ _- - psi Test Temp. _ _ _ _ _ _ oF

9. Remarks -s.;..e~e~/le::..m~7------------~A-P-p~li-ca~b~l~e~M~a-n-m~a-ct~u-r-er~s~D~-a~ta~R~e-po~rts~t-o~be-a~tta~c~h-e~d~---------------------

CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

--I,;::..-_ _ _ _.;.;NI.:..;:A-'-_ _ _ _ _ _ Expiration Date NlA Signed H-~~..=J..t~~~=::-:~--=-:-:__=.::.:~::.:.in~te:.:.;:nd:.:.en:..:.:..-t Date 3- 9i2 /;( 0/,,3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford $learn Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 03/"Zz!r "3 to 05/30/{ "2 " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

~ ~-" Commissions ----,:-:-::G~-;><!:.A~3_'_'='*3,...:;'&:c_'_:___=-:__-_:_=__:_--.,__--

~ Inspector's Signature National Board, State, Province and Endorsements Date 30?-1.hIj7-Di3

Retrieved from "https://kanterella.com/w/index.php?title=ML13184A269&oldid=2456333"