ML13184A269

From kanterella
Jump to navigation Jump to search
R16 Inservice Inspection Report Summary
ML13184A269
Person / Time
Site: Vogtle Southern Nuclear icon.png
Issue date: 07/02/2013
From: Pierce C
Southern Nuclear Operating Co
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML13184A269 (74)


Text

Charles R. Pierce Southern Nuclear Regu latory Affairs Director Operating Company, Inc.

40 Inverness Cen ter Parkway Post Office Box 1295 Birmingham, Alabama 35201 Tel 205.992.7872 Fax 205.992.7601 SOUIHERN ' \

July 2, 2013 COMPANY Docket Nos.: 50-425 NL-13-1436 U. S. Nuclear Regulatory Commission AnN: Document Control Desk Washington , D. C. 20555-0001 Vogtle Electric Generating Plant - Unit 2 2R16 Inservice Inspection Report Summary Ladies and Gentlemen :

Southern Nuclear Operating Company (SNC) submits herewith the Vogtle Electric Generating Plant Unit 2, Interval 3, Period 2, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the spring 2013 maintenance I refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI , 2001 Edition with addenda through 2003 requires submittal of the enclosed report.

The supporting inservice inspection documentation, e.g ., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant.

Please note that on Tab F of the Enclosure, Sheet 2 of 3 and Sheet 3 of 3 for Traveler

  1. 11110 are the best copies available to SNC.

This letter contains no NRC commitments. If you have any questions, please contact Ken McElroy at (205) 992-7369.

Respectfully submitted, C. R. Pierce Regulatory Affairs Director CRP/RMJ/lac

U. Nuclear Regulatory Commission NL-1 436 2

Enclosure:

Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval 3, Period 2, Outage 2, A-F cc:

Mr. Kuczynski, Chairman, President &

Mr. D. G. Executive Vice President & Chief Nuclear Officer Mr. T. Tynan, President - Vogtle Mr. B. L. Ivey, President - Regulatory Affairs Mr. J. Adams, Vice President - Fleet Operations RType: CVC7000 Mr. V. M. Regional Administrator Mr. R. E. Martin, NRR Senior Project Manager - Vogtle Mr. L. M. Cain, Senior Resident Inspector - Vogtle

Vogtle Electric Generating Plant Unit 2 2R16 Report Summary Vogtle Electric Generating Plant - Unit 2 Inservice Inspection Report Refueling Outage (2R16), Interval Period Outage 2, A~F

SOUTHERN _ SOUTHERN COMPANY COMPANY INSERVICE INSPECTION REPORT REFUELING 16 INTERVAL 3 PERIOD 2 OUTAGE 2 Vogtle Electric Generating Plant Unit 2 (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830)

Southern Nuclear Operating Company 40 Inverness Parkway Birmingham, Alabama 35242 COMMERCIAL OPERATION DATE: May 20,1989 DOCUMENT COMPLETION DATE: June 2013

VOGTLE ELECTRIC GENERATING (VEGP)

PLANT 2R16 FINAL REPORT TABLE OF CONTENTS VOLUME 1 (OWNER'S REPORT)

  • INTRODUCTION AND ABBREVIATIONS A
  • ASME FORM NIS-1 AND ABSTRACT B
  • INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

CLASS 1 AND 2 WELDS AND SUPPORT EXAMINATIONS C SYSTEM PRESSURE TESTS D REPORTABLE INDICATION

SUMMARY

E

  • OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (ASME FORM F VOLUME 2 (151 EXAMINATION DATA)
  • EXAMINATION PROGRAM PLAN SCOPE

SUMMARY

) G

  • lSI EXAMINATION DATA H VOLUME 3 (CERTIFICATIONS)
  • PERSONNEL CERTIFICATIONS I
  • EXAMINATION PROCEDURES J
  • EQUIPMENT CERTIFICATIONS & CALIBRATION BLOCKS (LISTING) K VOLUME 4 (FLOW ACCELERATED HO:SIUIN - FAC)
  • FAC EXAMINATION

SUMMARY

L

  • FAC EXAMINATION DATA M VOLU 1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A

SUMMARY

REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE.

VOLU 2 AND 3 CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS PERFORMED ON SITE BY VOLU 4 CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION (FAC) INSPECTIONS PERFORMED ON SITE BY VEGP) 1

SOUTHERN ~ SOUTHERN_

COMPANY COMPANY SOUTHERN NUCLEAR OPERA TING COMPANY ENGINEERING PROGRAMS DEPARTMENT INSERVICE INSPECTIONS PLANT VOGTLE UNIT 2 REFUELING OUTAGE 16 SPRING 2013 Volume 1 Owner's Report

TAB A INTRODUCTION AND ABBREVIATIONS

This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 2 th (VEGP-2) between October 12, 2011 &end of the fifteenth (15 ) maintenance/refueling outage, 2R15} and 1

April 3, 2013 of the sixteenth (16 ) outage, 2R16} to meet the requirements of Article IWA-6000 of the American Society of Mechanical Boiler and Pressure Vessel Section XI, 2001 Edition with 2003 Addenda This and/or which were documented since the last at VEGP-2 through the completion of the sixteenth maintenance/refueling outage on April 3, 2013 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form are included herein.

This report includes a summary of the steam generator tube inspections which are required per VEGP Technical 5.6.10. The detailed information will be provided in a one hundred (180) after the initial entry into MODE 4 following com of an inspection performed in accordance with Technical Specification 5.5.9. A summary these inspections is included behind Tab B in the Abstract.

1-1

LIST OF ABBREVIATIONS ACC Acceptable AD AnchorlDarling AFW Auxiliary Feedwater System AI SNC Action Item (followed by unique no. denoting Action Item number)

AN II Authorized Nuclear Inspector ASME American Society Mechanical Engineers ASNT American Society for Nondestructive Testing ASTM American Society for Testing and Materials BC Branch Connection Centrifugally Cast Stainless Steel CCW Component Cooling Water Combustion Engineering CH Head CR Condition Report CS Containment Spray CVCS Chemical Volume Control System Downstream Eddy rrent Examination Evaluation FAC Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion")

FB Flange Bolting FNF FAC Notification Report FW Feedwater System Final Safety Analysis Report (includes thereto)

Indications GPC Georgia Power Company HHSI High Head Injection HL Hanger HX Heat Exchanger Hydraulic Snubber NRC Information Notice (may shown as "IN" followed by unique no. denoting number)

IND Indication INF Indication Notification lSI Inservice Inspection Inservice Testing Improved Technical Specification 10 Inside Diameter IR Inside LB Large LD Longitudinal Seam Weld Extending Downstream Longitudinal Seam Weld Downstream Inside Radius of Longitudinal Seam Weld Downstream Outside of Elbow LMT Lambert, MacGiII Thomas LU Longitudinal Weld Extending Upstream LU-I Longitudinal Weld Upstream Inside LU-O Longitudinal Seam Weld Upstream M Mechanical Snubber MS Main Steam System MT Magnetic Particle Examination NCI Nonconformance Item NDE Nondestructive Examination 1*2

LIST OF ABBREVIATIONS - (continued)

NI No Indication NRC United States Nuclear Regulatory NRC-B NRC Bulletin (followed by unique no. Bulletin number)

NRI No Recordable Indication NSCW Nuclear Service Cooling Water OR Outside Radius PL Pipe Lug PM Paul-Munroe EN ERTECH PR Pipe Restraint PROF Profile PS Pipe Support PSA Pacific Scientific PSI Preservice Inspection PT Liquid Penetrant RCS Reactor Coolant System RCP Reactor Coolant Pump RHR Residual Heat Removal RI Recordable Indication RLW Refracted Longitudinal Wave RL Restraint Lug RPV Reactor iJr""""',

RR Relief Request (followed by unique no.

RWST Refueling Water Tank SAT Satisfactory Small SCS Southern Company Services SI Safety Injection System SNC Southern Nuclear Operating Company SUP Supplemental Data T&C Thickness and Contour TDAFW Turbine Driven Auxiliary Technical Evaluation (fol evaluation number)

UNSAT Unsatisfactory Examination US Upstream UT Ultrasonic Examination VEGP Vogtle Electric Generating Plant (common u followed by "-1" or" to designate a specific plant unit)

VT Visual Examination W Westinghouse 1-3

TABB ASME FORM NIS-1 AND ABSTRACT

  • Form NIS-1
  • Abstract

FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS

1. Owner: Southern Nuclear for Power 40 Inverness Center Birmingham, AL 35242
2. Plant: Vogtle Electric Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830
3. Plant Unit: Two
4. Owner Certification of Authorization: N/A
5. Commercial Service Date: 05/20/89
6. National Board Number for Unit: N/A
7. Components Component or Manufacturer or Manufacturer or Installer State or National Board Appurtenance Installer and Serial Number Province Number Address Number Reactor 7372 N/A 22004 Pressure Vessel Reactor Coolant 5*9744D35G01 N/A 37 Pump4 Steam GBGT 1981, GBGT 1 N/A 33,34. 36 Generators 1 Pensacola, FL GBGT 1983, GBGT 1 thru 4 Injection 52230 N/A 447 Pump Train "B" CA Residual Heat Joseph Oat 2322-2D N/A 1051 Removal Heat NJ Exchanger, Train "B" Centrifugal Huntington Pumps 52236 N/A
  • 413 Charging Pump, Huntington CA Train HB" Pullman Power System Numbers 1201, 1 N/A N/A Products, 1204, 1205, 1 1 Williamsport, PA 1301,1302, & 1501 2-1

FORM NIS-1 (Back)

8. Examination Dates: October 12, 2011 to April 3, 2013
9. Inspection Period Identification: Second Period
10. Inspection Interval Identification: Third Inspection Interval
11. Applicable Edition of Section XI 2001 Addenda 2003
12. Date/Revision of Inspection Plan: Volume 1 - 12/12/12, Version 7.0; Volume 3 - 12/8/11, Version 2.0; Volume 4 - 1/25/13, Version 6.0; Volume 5 - 2/22/13, Version 4.0; Volume 6 - 12/15/11, Version 4.0
13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings)
14. Abstract of Results of Examinations and Tests. (See Abstract)
15. Abstract of Corrective Measures. (See Abstract)

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c . easures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) N/A Date: t, - 2.r~ 2013 Signed:

o Geor CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford, CT have inspected the components described in this Owner's Report during the period October 12, 2011 to April 3, 2013, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commission: c'1J 93 '8

'YlnSpector's Signature National Board, State, Province, and Endorsements Date: '2 ~ :JtJl\e... 20&

2-2

ABSTRACT - ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code,Section XI, 2001 Edition (Code), with the 2003 Addenda, is the code for conducting inservice inspection activities during the third inspection interval at VEGP-2. Examinations and tests required by the Code are scheduled in accordance with "Inspection Program Bn as defined in Code paragraphs IWB-2412 and IWC-2412. This "Owner's for Inservice is for those second examinations and tests which were performed between (end of the 2R15 and April 3, 2013 (end of the 2R16 outage).

VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federal Register Notices 64 FR 51370 dated September 22, 1999, as later modified by 69 dated October 1, 2004. The initial Rule specified the 1995 Edition with Addenda 1996 as the edition of ASME Section XI, Appendix VIII. The 2004 Rule the Edition with caveats. VEGP except where requests for technical alternatives or exemptions have been approved, complied with the

,,,,rr,,,,nrc for implementation of the Appendix VIII the EPRI Performance Demonstration Initiative (PDI).

In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and documented at VEGP-2 since 2R15 through the end of 2R16. Class 1 and Class 2 Owner's Reports for Repairs or Replacements NIS-2) are provided herein.

It should be noted that Authorized Nuclear Inservice (ANII) services were provided for those examinations and tests the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category. Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT) and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

  • During the scope of VEGP-2 examinations conducted, no Class 1 components were observed to have indications. SNC defines "reportable as those indications exceeding standard of ASME XI. Since there were no observed Class 1 reportable n/'1I.... :::tlll"lrl~

there will not be any entries in Tab E for of Class 1 components. It should also be noted that no indications were "identified" which dispositions to acceptance standards.

Three Class 1 and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI examination coverage to be attained. As noted the subject code case has been by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometriC configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief process as allowed by 10 CFR 50.55a.

2*3

Southern Nuclear Company contracted WesDyne to support Reactor Vessel Head Inspections during the 2R 16 outage. The requirement for tooling was unique to VogUe compared to the normal operation due to distance required from the floor to the head equipment was built to operate to these requirements.

were the Electric Power in 2009. In addition to the personnel were also demonstrated and These demonstrations did require some from the previous in 2006 which enhanced the "cr,ot'l',,,,,

One of the requirements was to utilize both the circumferential and axial shooting TOF techniques for the required volume utilizing Code Case N-729-1. This requirement lead to development and deployment of 2 blade which has both TOF directions with a zero degree for leak path assessment which was also demonstrated and qualified at PDI with the open probes.

No in-service was reported with the RPV CRDM examinations. Some examination limitations occurred which Southern Nuclear had previously addressed with Alternative VEGP-ISI-ALT-07, 7/19/2012 (ML121 ",,,,n,s:..vv Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI the performance of a test (IWB-5221) each outage. This system leakage test (14910-201) was performed prior to plant startup the refueling outage.

These visual examinations revealed minor and boron residue at mechanical connections. These leakage conditions were either corrected or evaluated and determined <:lr-r'o,...'r!> for continued operation.

Of particular interest to the system leakage test is the seal cap enclosures on four Class 1 check valves.

The VT -2 examination was performed with these seal cap enclosures in which could prevent pressure boundary from being detected. Southern Nuclear submitted an alternative to the NRC requesting approval to the VT-2 examination with the seal caps installed. NRC approval forthe alternative examination is documented in NRC Accession No. ML13123A 1 "Vogtle Electric Plant, Units 1 and 2 - Safety Evaluation of Relief Request Version 2.0, Regarding Tests for Reactor Coolant Pressure Boundary (TAC NOS. MF0673 AND MF0674)" dated May 7,2013. No evidence of leakage was observed during the VT-2 examination performed during the leakage test with the seal cap enclosures installed.

Selected Class 2 were examined Southern Nuclear Company (SNC) personnel utilizing ultrasonic testing (UT). liquid penetrant (PT). and visual testing (VT) methods, as applicable.

Specific components and examination areas are itemized in the applicable portions of this document.

.. During the scope of VEGP-2 examinations conducted, no Class 2 components were observed to have indications. SNC defines "reportable as those indications exceeding ",n."*If'..,

standard of ASME XI. Since there were no observed Class 2 reportable there will not be any entries in Tab E for of Class 2 It should also be noted that no indications were "identified" which standards.

No class 2 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas.

2-4

Class 2 System Pressure Tests Table IWC-2500-1, Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the "System Pressure Tests" portion of this report document. The visual examinations performed during these system leakage tests found only minor leakage or residue at mechanical joints such as valve stem packing and at flanged connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.

Steam Generator Tube Inspections The scope of the Vogtle 2R16 steam generator examinations, as scheduled, is listed below. The inspection plan met or exceeded the requirements of the ERPI PWR Steam Generator Examination Guidelines, revision 7, and was aligned with the SNC SG Program Strategic Plan, NMP-ES-004-GL01, version 11. The SG inspection program addressed the known degradation mechanisms observed in VogUe Unit 2 in prior inspections as well as potential degradation mechanisms. The program also addressed inspection requirements related to the implementation of the permanent H* alternate repair criteria (PARC).

  • 100% Bobbin examination of tubes in SGs 2 and 3 full length except for Rows 1 and 2, which are inspected from tube end to tube support plate (TSP) #7 from both hot leg (HL) and cold leg (CL).
  • 100% +Point examination of Row 1 and Row 2 U-bends from the top TSP on the HL to the top TSP on the CL in SGs 2 and 3.
  • +Point examination of Special Interest, HL and CL, of bobbin possible flaw locations including U bends.
  • 100% +Point examination at HL tubes in SGs 2 and 3 from the top of tubesheet (TTS) to the licensed Permanent Alternative Repair Criteria (ARC) depth for H* (tubesheet region on HL side (TSH) +3/-15.2 inches). This inspection captured the TTS BLGI OXP populations, as defined below, along with the required periodic sample specified in the regulatory approval of ARC.

BLG = differential mix diameter discontinuity signal within the tubesheet of 18 volts or greater as measured by bobbin coil probe; OXP = a tube diameter deviation within the tubesheet of 1.5 mils or greater as measured by bobbin coil profile analysis.

  • 100% +Point examination of total dents and dings ~ 2 volts in SGs 2 and 3 HL straight lengths and U-bends.
  • 100% Visual inspection of tube plugs in SGs 2 and 3.
  • Visual inspection in SGs 2 and 3 of channel head primary side HL and CL in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".

Steam Generator Inspection Expansion Based on the confirmation of ODSCC at the hot leg tubesheet expansion transitions in SG2, expansion of the eddy current program was conducted in SGs 1 and 4 with a minimum scope of 20% +Point of tubesheet +3/-15.2 inches along with a 100% inspection of tube plugs in SGs 1 and 4. This expansion was conducted in accordance with the requirements of the EPRI SG Examination Guidelines.

Additionally, visual inspection of the channel head primary side HL and CL of SGs 1 and 4 has been performed as part of the expansion in accordance with Westinghouse Letter NSAL 12-1, "Steam Generator Channel Head Degradation".

2-5

Steam Generator Damage Mechanisms Found and NDE Techniques Utilized Based on SG eddy current and visual inspection results, a new degradation mechanism to Unit 2 was identified. The existing degradation mechanisms in the VogUe Unit 2 are:

  • (New) Outer Diameter Stress Corrosion Cracking (ODSCC) at the hot leg tubesheet expansion transitions (A single circumferential ODSCC was identified). - +Point probe and Ghent probe techniques were used to analyze the indication.
  • Mechanical Wear due to Foreign Objects - +Point and bobbin techniques were used to evaluate the wear.
  • Mechanical Wear at AVB Supports. - Bobbin techniques were used to evaluate wear.
  • Mechanical Wear and Wall loss from Secondary Side Cleaning Activities. - Bobbin techniques were used to evaluate wear.

The table below presents a summary list of all SG tubes plugged in 2R16 and the related degradation mechanism.

Degradation %TW~ Plugging Basis Stabilizer SG Row Col Indication Mechanism Installed 1 3 2 15 60 SCI ODSCC 33% Plug on Detection Yes 2 4 41% Tech Spec Plugging Limit No 3 56 82 PCT AVB Wear Notes:

1 - Single Circumferential Indication 2 - Bobbin Volumetric Sizing 3 - Outside Diameter Stress Corrosion Cracking 4 - Anti-Vibration Bar 5 - Percent Through-Wall Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document.

  • During the scope of VEGP-2 examinations conducted, one component support (21302-107 -H004) was observed to have a loose locking nut, which constituted unsatisfactory visual results. In accordance with IWF-3122.3(a) the condition was determined to be acceptable by evaluation.

Although evaluated to be acceptable the condition identified was corrected under Southern Nuclear MWO SNC475383 with a re-examination occurring after corrective actions were taken. The examination results and corrective action is listed with the Indication Notification section of this report (Reference INF 113V2001).

Class MC Containment Examinations (lWE)

During the VEGP-2 Spring 2013 maintenance/refueling outage, General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI, Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using NMP-ES-024-207 "General Visual Examination (IWE)". Per procedure NMP-ES-024-207, the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate its leak-tightness or structural integrity.

2-6

Personnel performing the examinations were qualified in accordance with VEGP procedure NMP-ES-024 100 "Qualification and Certification of Nondestructive Examination and Personnel". Optical aids such as flashlights, mirrors and binoculars were used when the examinations that included both direct and remote visual examination methods.

A General of 100% of the interior accessible surface areas of the containment pressure was and documented under Surveillance 84303-201 Exterior ....",t..."1

were not examined this refueling outage, bul will be examined laler in the Period. the examination a section of the liner plate was found to be bulging. CR 610528 was written to document the indication and INF 113V2002 was to document the condition as well. The area of the liner plale was found to be "as-is" using a previous evaluation. More information can be obtained referencing the INF listed under Tab E. All remaining anomalies found consisted of surface rust, discolorations, arc etc. and were evaluated as not affecting the structural integrity or leak of the containment pressure boundary.

of the moisture barrier was and documented under Surveillance 84303-201 SNC350383 during refueling outage 2R16. No anomalies on the moisture barrier were noted.

The following containment pressure boundary bolted connections were examined during 2R 16 while the connections were disassembled for work activities. VT-1 or VT-3 examinations were performed to fulfill the requirements. No anomalies of the examined were identified. Examinations were under work orders SNC362740, SNC363211, and SNC376511. Results of examinations are documented under Surveillance 84303-201-SNC350383.

Personnel Air Lock 22101R2014 Air Lock 22101R2015 Dedicated Outage PAnAI:rl'llinn 5-M & 55-M None performed in 2R16.

This 2R16 Outage was the Outage, in the Period ofthe 3(d Interval. The results from this outage, combined with the "completed" examinations from previous refueling (2R 15, Fall 2011) and a rd couple of examinations scheduled for 2R 17, the 1 in the 3rd Period of the 3 Interval until then in accordance with IWA-2430{d)(3) will 100% of the total Class 1 and 2 scope for the current period and interval. VEGP Unit 2 is within ASME Code compliance, pending NRC approval of the volumetric and/or surface examination limitations. Requests for relief will be submitted within the time frame specified by 10 CFR 50.55a.

Applicable Code Cases The applicable Code Cases for the 2R16 are identified in Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan for the Third Inspection Interval under Enclosure 4. The Code Cases and limitations of use are derived from Revisions 14, 15, and 16 of NRC Guide 1.147.

2-7

TABC INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • CLASS 1 AND 2 WELD EXAMINATIONS
  • CLASS 1 AND 2 SUPPORT EXAMINATIONS

6- Summary 21201-031-3-RB I NMP-ES-024-501 I S13V2U015 NRI 2" ELBOW TO PIPE 21201-042-3-RB I NMP-ES-024-501 I S13V2U016 NRI R1.11H 2" ELBOW TO PIPE R-A(2) 21201-046-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U017 R-A(2) 21201-051-3-RB R1.11H 2" ELBOW TO PIPE I NMP-ES-024-501 I S13V2U018 NRI R-A(2) 21201-051-4-RB R1.20 2" PIPE TO TEE I NMP-ES-024-501 I S13V2U019 NRI I Limited exam >90% coverage. CC N-460.

R-A(2) 21201-051-5-RB NMP-ES-024-50 1 S13V2U020 NRI Limited exam >90% coverage. CC N-460.

R1.20 2" TEE TO PIPE R-A(2) 21204-021-17 -RB UT RI Geo. 50% Code Coverage.

NMP-ES-024-501 S13V2U030 RI R1.20 6" VALVE TO PIPE (AI 87-0131) 21204-021-18-RB NMP-ES-024-501 S13V2U011 RI UT RI 6" PI PE TO ELBOW Geo.

21204-021-19-RB I NMP-ES-024-501 I S13V2U029 RI I UTRI Geo.

6" ELBOW TO PIPE (AI 87-0131) 21204-021-20-RB NMP-ES-024-501 I S13V2U012 NRI INA 6" PIPE TO ELBOW 21204-021-22-RB 6" PIPE TO ELBOW NMP-ES-024-50 1 S13V2U013 RI I UTRI Geo.

21204-021-23-RB I NMP-ES-024-501 I S13V2U014 RI 6" ELBOW TO PIPE 21204*243*30-RB I NMP-ES-024-501 I S13V2U021 NRI R1.11 1B' VALVE TO PIPE R-A(2) 21204-243-31-RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U022 NRI R-A(2) 21204*244-28*RB R1.11 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U025 NRI I Examined per MRP-146 R-A(2) 21204*244*29*RB R1.11H 1.5" PIPE TO ELBOW I NMP-ES-024-501 I S13V2U026 NRI R-A(2) 21204-245-30-RB R1.11H 1.5" VALVE TO PIPE I NMP-ES-024-501 I S13V2U023 NRI I Examined per MRP-146 3-1

Vogtle 6 - Exami Summary (Total Piping)

ASME EXamfl,ai Section n Sheet Results r-I v",...

Cat II~~!!! No(s)

~ti~) 21204-245-31-RB Examined per MRP-146 requi ltS.

NMP-ES-024-501 S13V2U024 NRI 1.5" PIPE TO ELBOW Limited exam - >90% coverage. CC N-460.

~;~(~) 21204-246-32-RB 1.5" VALVE TO PIPE NMP-ES-024-501 S13V2U027 NRI Examined per MRP-146 R-A(2) 21204-246-33-RB lined per MRP-146 requi lents.

NMP-ES-024-501 S13V2U028 NRI R1.11H 1.5" PIPE TO ELBOW Limited exam >90% coverage. CC N-460.

C-C 21205-007 -72 NMP-ES-024-301 S13V2POO2 NRI NA C3.20 SUPPORT H022

-C 21205-008-35 NMP-ES-024-301 S13V2P003 NRI Limited exam >90% coverage. CC N-460.

C3.20 SUPPORT HOO2 C-C 21205-027 -6 NMP-ES-024-301 S13V2POO1 NRI Limited exam - >90% coverage. CC N-460.

C3.20 SUPPORT HOO8 C-C 21206-002-29 NMP-ES-024-301 S13V2POO4 NRI NA C3.20 SUPPORT HOO8

~ti~) 21208-007 RB 3" VALVE TO PIPE NMP-ES-024-501 S13V2U009 NRI 50% Code Cov.erage ..

Relief Request required.

~ti~) 21208-007-2-RB 50% Code Coverage.

NMP-ES-024-501 S13V2U010 NRI 3" PIPE TO VALVE Relief~equest required.

f---------

~--A(2) 21208-007 -G-RB NMP-ES-024-501 S13V2U031 NRI NA R1.11 3" PIPE TO BRANCH CONNECTION

~tJ~) 21302-107-13-RB PENETRATION TO 6" PIPE NMP-ES-024-502 S13V2U005 NRI NA

~tJ~) 21302-107-14-RB 6" PIPE TO VALVE NMP-ES-024-502 S13V2UOO6 NRI NA R-A(2) 21302-107-15-RB NMP-ES-024-502 S13V2U007 NRI NA R1.20 6" VALVE TO PIPE R-A(2) 21302-107-1G-RB NMP-ES-024-502 S13V2UOO8 NRI NA

~:20 6" PIPE TO ELBOW 21302-109-15-RB NMP-ES-024-502 S13V2UOO1 NRI NA R1.20 PENETRATION TO 6' PIPE

~tJ~) ..

21302-109-19-RB

_ 6" VALVE TO PIPE NMP-ES-024-502 S13V2U002 NRI NA R-A(2) 21302-109-20-RB NMP-ES-024-502 S13V2UOO3 NRI NA

~O 6" PIPE TO ELBOW 3-2

Vogtle 2R16 - nation Summary Pipi Examination Results Remarks No(s 21302-109-21-RB NMP-ES-024-502 I S13V2U004 NRI NA

' - - _ - ' - -_ _ _ _ _L. 6" ELBOW TO PIPE 3-3

6 - Examination Summary (Total Equipmert<l.

ASME Exam/Cal Section mathn Sheet Procedure{s)

Cat litem No(s)

N-122 21201-BS-001-110-VT NMP-ES-024-202 S13V2V108 Sat NA 20 CHANNEL HEAD DRAIN TUBE B-D 21201-BS-001-IR-01 NMP-ES-024-513 S13V2U033 NRI NA B3.140 INLET NOZZLE INNER RADIUS B-D 21201-B6-001*IR-02 NMP-ES-024-513 S13V2U034 NRI NA B3.140 OUTLET NOZZLE INNER RADIUS N-122 21201-B6-002-110-VT NMP-ES-024-202 S13V2V109 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE N-122 21201-BS-003-110-VT NMP-ES-024-202 S13V2V110 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE N-722 21201-BS-004-110-VT NMP-ES-024-202 S13V2V111 Sat NA B15.120 CHANNEL HEAD DRAIN TUBE B-G-2 I-P6-002-B33 B48 Performed QC PtJl::iOIIIi per 2" DIAMETER SEAL WATER HOUSING NMP-ES-024-201 NA Sat B7.60 BOLTS Work Order SNC456322.

N-722 21201-V6-001-BMI-BMV RPV BOTTOM HEAD INSTRUMENTATION NMP-ES-024-208 S13V2V052 Sat NA B15.80 BMV N-129 21201-V6.001-C~DI\JI@~.'Q NMP-ES-024-208 S13V2V163 Sat NA B4.10 BMV VESSEL CLOSURE HEAD EXTERIOR Reference Westi Jhouse Report WDI N-729 21 ,v*CRDM VENDOR VENDOR Sat PJF-1 . Limitations all B4.20 CRDM NOZZLE qreater than 98% coveraQe.

B-N-1 21201-VS-001-101 NMP-ES-024-203 S13V2V186 Sat NA B13.10 VESSEL INTERIOR B-N-1 21201-VS-001-102 VESSEL CLOSURE HEAD INTERIOR (FSAR NMP-ES-024-203 S13V2V088 Sat NA B13.CH 5.3.3.7l N-122 21201*VS*001*W33*BMV NMP-ES-024-202 S13V2V145 Sat NA B15.90 OUTLET NOZZLE N1 SAFE END BMV N*722 21201-VS-001-W3S-BMV NMP-ES-024-202 S13V2V146 Sat NA B15.90 OUTLET NOZZLE N4 SAFE END BMV N-722 21201-V6-001-W37 -BMV NMP-ES-024-202 S13V2V147 Sat NA B15.90 OUTLET NOZZLE N5 SAFE END BMV N-122 21201-V6-001-W40-BMV NMP-ES-024-202 S13V2V148 Sat NA B15.90 OUTLET NOZZLE N8 SAFE END BMV 3-4

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Examination/Area Sheet Results Remarks Procedure(s)

Cat /Item No(s).

F-A 21201-012-H604 NMP-ES-024-203 S13V2V171 Sat NA F1.10H(2) VAR SPRING F-A 21201-030-H602 NMP-ES-024-203 S13V2V183 Sat NA F1.10G(2) STRUT F-A 21201-030-H606 NMP-ES-024-203 S13V2V187 Sat NA F1.10G(2) STRUT F-A 21201-030-H630 NMP-ES-024-203 S13V2V112 Sat NA F1.10F(2) RESTRAINT F-A 21201-049-H024 NMP-ES-024-203 S13V2V161 Sat NA F1.10G(2) STRUT F-A 21201-P6-004-SP01 NMP-ES-024-203 S13V2V114 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP02 NMP-ES-024-203 S13V2V115 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-SP03 NMP-ES-024-203 S13V2V116 Sat NA F1.40(2) PUMP SUPPORT F-A 21201-P6-004-T01 NMP-ES-024-203 S13V2V117 Sat NA F1.40(2) RESTRAINT F-A 21201-P6-004-T02 NMP-ES-024-203 S13V2V113 Sat NA F1 .40(2) RESTRAINT F-A 21201-P6-004-T03 NMP-ES-024-203 S13V2V188 Sat NA F1.40(2) RESTRAINT Limitations . Approximately 25%

F-A 21201-V6-001-RS1 NMP-ES-024-203 S13V2V141 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req'd .

Limitations. Approximately 25%

F-A 21201-V6-001-RS2 NMP-ES-024-203 S13V2V142 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

Limitations. Approximately 25%

F-A 21201-V6-001-RS3 N MP-ES-024-203 S13V2V143 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

Limitations. Approximately 25%

F-A 21201-V6-001-RS4 NMP-ES-024-203 S13V2V144 Sat coverage. Per IWF-1230, examined F1.40(2) VESSEL SUPPORT accessible portions. Relief not req 'd.

3-5

Vogtle 2R16 - Examination Summary (Total Supports)

ASME II eo> .4-: ...

,n ExaminationlArea I ___ =UI -,._-

~ ........"'+ Results Remarks litem No(s).

F-A 21202-001-H018 NMP-ES-024-203 S13V2V101 Sat NA F1.20G(2) STRUT 21202-140-HOO3 NMP-ES-024-203 S13V2V032 Sat NA F1.20F(2) RESTRAINT F-A 21202-141-H011 NMP-ES-024-203 S13V2V033 Sat NA F1.20G(2) STRUT F-A 21202-216-H014 NMP-ES-024-203 S13V2V055 Sat NA F1.20F(2) RESTRAINT F-A 21202-216-H019 NMP-ES-024-203 S13V2V095 Sat NA F1.20F(2) RESTRAINT F-A 21202-216-H020 N MP-ES-024-203 S13V2V096 Sat NA F1.20F(2) RESTRAINT F-A 21202*216-H021 NMP-ES-024-203 S13V2V056 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-HOO3 NMP-ES-024-203 S13V2V079 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-HOO5 NMP-ES-024-203 S13V2V068 Sat NA F1.20G(2) STRUT F-A 21202-220-HOO6 NMP-ES-024-203 S13V2V069 Sat NA F1.20G(2) STRUT F-A 21202-220*H011 NMP-ES-024-203 S13V2V070 Sat NA F1.20F(2) RESTRAINT F*A 21202-220-H015 NMP-ES-024-203 S13V2V071 Sat NA F1.20F(2) RESTRAINT F-A 21202*220*H017 NMP-ES-024-203 S13V2V072 Sat NA F1.20F(2) RESTRAINT F-A 21202-220-H023 NMP-ES-024-203 S13V2V073 Sat NA F1.20F(2) RESTRAINT 21202-220-H025 N MP-ES-024-203 S13V2V074 Sat NA F1.20F(2) RESTRAINT/LUGS F*A 21202-220-H028 NMP-ES-024-203 S13V2V103 Sat NA F1.20G(2) STRUT F-A 21202-220-H029 NMP-ES-024-203 S13V2V102 Sat NA F1.20G(2) STRUT 3-6

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Exam i nation/Area Sheet Results Remarks Procedure(s)

Cat litem No(s).

F-A 21202-229-H012 NMP-ES-024-203 S13V2V097 Sat NA F1.20F(2) RESTRAINT F-A 21202-229-H021 NMP-ES-024-203 S13V2V107 Sat NA F1.20F(2) RESTRAINT F-A 21204-011-HOO5 NMP-ES-024-203 S13V2V022 Sat NA F1.20F(2) RESTRAINT F-A 21204-012-HOO1 NMP-ES-024-203 S13V2VOO3 Sat NA F1.20F(2) RESTRAINT F-A 21204-021-HOO2 NMP-ES-024-203 S13V2V162 Sat NA F1.10G(2) STRUT F-A 21204-021-HOO4 NMP-ES-024-203 S13V2V129 Sat NA F1.10F(2) RESTRAINT F-A 21204-021-HOO8 NMP-ES-024-203 S13V2V130 Sat NA F1.10G(2) STRUT F-A 21204-021-H 009 NMP-ES-024-203 S13V2V131 Sat NA F1.10F(2) RESTRAINT F-A 21204-021-H011 NMP-ES-024-203 S13V2V164 Sat NA F1.10G(2) STRUT F-A 21204-021-H012 NMP-ES-024-203 S13V2V132 Sat NA F1.10G(2) STRUT F-A 21204-021-H014 NMP-ES-024-203 S13V2V133 Sat NA F1.10G(2) STRUT F-A 21204-021-H015 NMP-ES-024-203 S13V2V134 Sat NA F1.10G(2) STRUT F-A 21204-021-H016 NMP-ES-024-203 S13V2V135 Sat NA F1.10F(2) RESTRAINT F-A 21204-039-HOO1 NMP-ES-024-203 S13V2V177 Sat NA F1.20A(2) ANCHOR F-A 21204-063-HOO1 NMP-ES-024-203 S13V2V034 Sat NA F1.20F(2) RESTRAINT F-A 21204-076-H010 NMP-ES-024-203 S13V2V122 Sat NA F1.JOC;(2) STRUT F-A 21204-076*H011 NMP-ES-024-203 S13V2V123 Sat NA E~*1Qft~L RESTRAINT 3-7

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination Section XI Examination/Area Sheet Results Remarks Procedure(s)

Cat litem No(s}.

F-A 21204-076-H014 NMP-ES-024-203 S13V2V124 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H015 NMP-ES-024-203 S13V2V125 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H017 NMP-ES-024-203 S13V2V126 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H019 NMP-ES-024-203 S13V2V127 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H021 NMP-ES-024-203 S13V2V128 Sat NA F1.10F(2) RESTRAINT F-A 21204-076-H023 NMP-ES-024-203 S13V2V175 Sat NA F1.10G(2) STRUT F-A 21204-121-HOO1 NMP-ES-024-203 S13V2V084 Sat NA F1.20F(2) RESTRAINT F-A 21204-P6-004-S01 NMP-ES-024-203 S13V2VOO4 Sat NA F1.40(2J PUMP SUPPORT F-A 21205-003-H010 NMP-ES-024-203 S13V2V160 Sat NA F1.20F(2) RESTRAINT/LUGS F-A 2120S-004-H019 NMP-ES-024-203 S13V2V011 Sat NA F1.20F(2) RESTRAINT F-A 2120S-006-HOO9 NMP-ES-024-203 S13V2V012 Sat NA F1.20G(2) STRUT F-A 21205-007 -H022 NMP-ES-024-203 S13V2V013 Sat NA F1.20F(2) RESTRAINT F-A 21205-007-H02S NMP-ES-024-203 S13V2V014 Sat NA F1.20G(2) STRUT F-A 21205-008-H023 NMP-ES-024-203 S13V2V017 Sat NA F1.20F(2) RESTRAINT F-A 21205-008-H039 NMP-ES-024-203 S13V2V015 Sat NA F1.20H(2) VARSPRING F-A 21205-027 -H008 NMP-ES-024-203 S13V2V050 Sat NA F1.20F(2) RESTRAINT F-A 21205-E6-002-S01 NMP-ES-024-203 S13V2V016 Sat NA F1.40(2) SUPPORT SKIRT 3-8

Vogtle 2R16 - Examination Summary (Total Supports)

ASME Exam/Cel!

Section XI ._ .. _...

,~tinnl Examination Sheet .,--~ ..

~AC:llltc: Remarks Cat litem No(s).

F-A 21206-001-H007 NMP-ES-024-203 S13V2V157 Sat NA F1.20H(2) VAR SPRING F*A 21206-002-H022 NMP-ES-024-203 S13V2V049 Sat NA F1.20F(2) RESTRAINT F-A 21206-004*H006 NMP-ES-024-203 S13V2V053 Sat NA F1.20F(2) RESTRAINT F-A 21206*008*H096 NMP-ES-024-203 S13V2V078 Sat NA F1.20G(2) STRUT F-A 21208-007 -H001 NMP-ES-024-203 S13V2V165 Sat NA F1.10F(2) RESTRAINT F-A 21208-099-H603 NMP-ES-024-203 S13V2V051 Sat NA

~1 IF(2) RESTRAINT 21208*137*HOO1 NMP-ES-024-203 S13V2V028 Sat NA F1.20F(2) RESTRAINT F-A 21208*139-HOO4 NMP-ES-024-203 S13V2V026 Sat NA F1.20F(2) RESTRAINT F-A 21208*139*HOO9 NMP-ES-024-203 S13V2V027 Sat NA F1 RESTRAINT 2120S-145-HOO6 NMP-ES-024-203 S13V2V023 Sat NA F1.20F(2) RESTRAINT F-A 21208-411-H010 NMP-ES-024-203 S13V2V024 Sat NA F1.20U(2) UNDERSUPPORT F*A 21208-411*H016 NMP-ES-024-203 S13V2V025 Sat NA F1.20U(2) UNDERSUPPORT F-A 21208*P6*003*S01 NMP-ES-024-203 S13V2VOO7 Sat NA F1.40(2) SUPPORT BASE F-A 21301*016-HOO3 NMP-ES-024*203 S13V2V151 Sat NA If1:20G(2) STRUT 21302*033-HOO2 NMP-ES-024-203 S13V2V174 NA Sat F1"20A121 f-CCC""" LeL """""""""

ANCHORW/ATI 21302-086-HOO5 NMP-ES-024-203 S13V2V140 NA Sat F1.20A(2) ANCHOR 3-9

Vogtle 2R16- Summary pports)

ASME Exam/Cal

.40: .... XI Examination e Examination/Area Sheet Results Rema.

Procedure(s)

Cat litem No(s).

Loose "jam nut". 't" lhlp "as-is" F-A 21302-107-H004 Unsat I per Ref INF 113V2001.

NMP-ES-024-203 S13V2V176 F1 RESTRAINT Sat Corrected per MWO SNC475383 and re-examined.

F-A 21302-107 -H009 NMP-ES-024-203 S13V2V170 Sat NA F1.20F(2J RESTRAINT F*A 21302*109*H004 NMP-ES-024-203 S13V2V149 Sat NA F1.20F(2)

~~~~~~~~.

RESTRAINT 21501*027*HOO3 NMP-ES-024-203 S13V2V185 Sat NA F1.20F(2) RESTRAINT F*A 21501*028*H001 NA NMP-ES-024-203 S13V2V180 Sat F1.20U(2) UNDERSUPPORT F-A 21501-028-H005 NMP-ES-024-203 S13V2V166 Sat NA F1.20F(2) RESTRAINT F*A 21501-038*HOO2 NMP-ES-024-203 Sat NA S13V2V100 F1.20F(2) RESTRAINT F*A 21501-038*H003 NMP-ES-024-203 S13V2V099 Sat NA F1.20F(2) RESTRAINT F-A 21501-038-H004 NMP-ES-024-203 S13V2V098 Sat NA c£L.. 1(2) UNDERSUPPORT 3*10

TABD INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • SYSTEM PRESSURE TESTS

The following system pressure tests on Class 1 and Class 2 nAI'Tnr'm~'r1 after the last refueling outage (2R 15) through the completion of the sixteenth The system pressure tests indicated below include system tests for:

.. Class 1 components (IWB-2500-1, Examination B-P),

.. Class 2 components (IWC-2500-1, Examination C-H) not during normal plant operation which are identified as 84003-203 84003-221,

.. Class 2 components (IWC-2500-1, Examination category to normal operation which are Identified as 84003-2AR through 84003-2CS.

Boundaries for the system pressure tests are described in the Pressure Test Plan Plan-Volume 3). Examination results are discussed in the sections of document.

The examination data for these system pressure tests is available at the site for review upon Test Description 14910-201 B-P I B15.10 84003-203 C-H/C7.10 to Cold 84003-206 C-H I C7.10 Penetration 33 (Safety Injection to Hot Test 84003-207 C-H I C7.10 Penetration 31 (Safety Injection to Hot Test 84003-209 C-H/C7.10 Penetration 56 (Residual Heat Removal Hot Leaka e Test 84003-210 C-H/C7.10 e Test 84003-211 C-H/C7.10 Residual Heat Removal System to Chemical and Volume Control S stem Suction S stem Leaka e Test 84003-214 C-H/C7.10 Turbine Driven Auxiliary Feedwater Pump 1302-P4-001 Leakage Test 84003-218 C-H/C7.10 Residual Heat Removal Train "An Suction Piping in Tank System Leakage Test 84003-219 C-H/C7.10 Residual Heat Removal Train "B" Suction Piping in Tank S stem Leaka e Test 84003-220 C-H I C7.i0 Tank 84003-221 C-H/C7.10 Tank 84003-2AR C-H I C7.10 Test 84003-2AS C-H I C7.10 84003-2CI C-H I C7.10 84003-2CJ C-H I C7.10 1302-P4-003 84003-2CS C-H I C7.i0 4-1

lABE IN RVIC INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

  • REPORTABLE INDICATION

SUMMARY

REPORTABLE INDICATION

SUMMARY

The following Indication Notifications Forms and/or Condition were issued due to -..<>,,,,,,.-tQ indications or conditions being observed during the examination of either Class 1 or 2 components during th the sixteenth 6 ) maintenance/refueling at VEGP-2 (referenced attachments are available at the VEGP for review upon request. as volumetric, surface or visual examinations with indications/conditions exceeding standard of ASME XI, thus "analytical evaluation". Volumetric and surface examinations meeting the applicable ",,..r*<>,..,lt!:l are not considered "reportable", and will not be indicated on the table below.

Visual indications will be included in the table, even if dispositioned as "acceptable". Generation of an "Indication Notification Report" and lor "Condition Report" as specified in the below table does not indicate a Code "Reportable" condition.

INF NO. and/or Affected Component/Area INF Disposition Condition R ort 113V2001 Support 21302-107-H004 R"'t"'r,pnl~'" Condition CR 611390 (IWF) Not per disposition. Condition corrected per MWO SNC475383.

113V2002 Containment Liner Plale /

CR 610528 Level 1 of CNMT near An area of the liner plate was found to have some Personnel Hatch sections on the 220' elevation (Level 1). The area in question is about 7 ft in width and 1 ft in The area is about 7 fI above the floor and butts up the thickened penetration for the Personnel Hatch.

The area in question was broken up into eight (8) one foot square grids and the lowest thickness was found in each grid. The lowest ultrasonic thickness measurement found was 0.213 in and nominal liner thickness in the area of is 0.25 in. This delta a 14.8% loss in nominal liner plate thickness, which is than the 10%

loss of material permitted by IWE-3122.3. From the measurements taken it was found that the area in question cn.A;t::lJlClUIt:: "as-is" using from a

,..,,,,,rr"r*m~.t4 engineering evaluation, REA 99-VAA713. In this the minimal wall thickness for this area is 0.125 in.

The cause for the bulging is unknown. This area will be added to the Vogtle Containment Inspection Plan as an Augmented Examination and will be examined in the 3'd Inspection Period of the Third Interval.

The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC Engineering Programs Department scope of work. With the exception of Steam Generator Tube Inspections any reportable indications or conditions observed by VEGP Site or outside contractors during their scope of work should be identified bylto the VEGP Site in document(s) which are referenced herein. Additional information related to Steam Generator Tube are to be provided in a one hundred eighty (180) days after the initial entry into MODE 4 as required VEGP 5.6.10.

5*1

TABF OWNER'S REPORT FOR REPAIR AND REPLACEMENTS (ASME FORM NIS-2)

OWN REPORTS REPAIRS REPLACEMENTS (FORM NIS-2)

The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-2 since the last maintenance/refueling outage (2R15) through the completion of the sixteenth (2R16). are identified by their traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2 are filed with their traveler at the plant site. Only those NIS-2 reports to VEGP-2 are included in this report document. Any attachments, e.g., code data etc., referenced in the NIS-2 reports will be made available for review upon at the plant site. It should be noted that even though Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the of does not the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement not NIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report.

11105 13011 13023 13074 11110 13013 13029 13075 11111 13014 13030 13076 11112 13015 13032 13080 13000 13016 13037 13081 13002 13018 13038 6 13003 13019 13040 13067 13004 13021 13043 13068 6-1

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'.1-'.1-'-.10.:....5=----_ _ __

1. Owner Southern Nuclear Operating Company Date May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC342588 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VogtJe Expiration Date NlA Address
4. Identification of System 1208/CVCS
5. (a) Applicable Construction Code ASME Sec. /II Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2""O",OC!.1-"e""dc:..'",20""O",3"",a",d""d""._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 14107 NlA V2-1208-047-H604 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 14117 NlA V2-1208-047-H604 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA 112 snubber serial nO.14117 was reelaced PSA 1/2 serial number 14107.
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks .:....S~e~e.:..../~te~m~7_ _ _ _ _ _ _~_~~~~~ _ _~~_~ _________________________________

Applicable Manufacturer's Data Reports to be attached CERnFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

~,\ \,0, Type Code Symbol Stamp NlA o.s\\<\ Certificate of Authorization No. NlA Expiration Date NlA Signed

~ ,\. ~~~-----\M-'-=-'--s-uP-Ee-rin-te-n-de-n-t Date Own~ or Owner's Designee, 1IItie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period II/~ II I to CO /1 ') / i ';' , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions National Board, State, Province and Endorsements Date IS'-;S VIV.: 1.c I ~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACllVITY All Required By The Provlalons Of The ASME Code Section XI Traveler 1# _ _,'-_'_'.:...0_ _ __

1. Owner Southem Nuclear Opsratlng Company Date January 24". 2012 Name 40 Invemess Center Parkway. Blrmln{!!Jam, AL Sheet of 3 Addrese
2. Plant VOgt/a Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC338727 Addreu AepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by _--"M.:.:a"'-Jnt:.:..:ena~nc~e..:;D;.;:epa=rtm=e;;.;nt~- Type Code Symbol Stamp NlA Name Authorization No. N/A Plant Vogt/a ExpIration Date _ _ _ _ _ _ _ _ _ _Nlr.;,..:4_ _ _ _ __

Address

4. Identification of SY8tem 12081 CHEMICAL & VOLUME CONTROL SYSTEM
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1972 Addenda, Winter 1972 Code ease (b) Applicable Edition of Section XI Used for RepalrJReplacement ActlvHy 2001 Eel. thru 2003 Add.

(e) Applicable Section XI Code Caae(a) NlA II. Identification Of Components National Corrected, ASMECode Name of Hameof Manufactu,.,. Board Other Year Removed, Of' Stamped Com~ent Manufacturer Serial No. No. IdWltlflcatlon Built Inatalled (yesOf' No)

VALVE VELAN, INC 750 /IVA 2HV8109 1989 REMOVED YES VALVE VELAN,INC 888405 NlA 2HV81 09 1987 INSTALLED YES

7. Deacriptlon of Work Installfld replacement Viilv9. The install9d valva (SIN 888405) was orIginal/Ypurchased as a spare under PO

-- 8.

PAV-27380.

Teet Conducted: Hydroetatlc Other 0 0

Preaaure PneumatleD Nominal Operating P.....ure[!]

pat Teat Temp. _ _ _ _ _ "F Exempt 0

9. RMna~ _~~_'_n~em~7____________~~~~~--~~~~~=_~~~~~~~-------------------

Applicable Manufacturers Data Reports to be attached CERl1FICATE OF COMPUANCE I certify that the statements made In the report are correct and that thl, confonn. to the requl.-.ments Code, SectIon XI.

0' the ASM!

Type Code Symbol Stamp /IVA Certificate of Authorization No. NlA expiration Date NlA

~+,

Signed ..Q f"t AJVo..J-.. W Do 0.. Date 1-~7-(~

( Owner or OWner's DeeIUh... TItle ~'() .......

V I ,... 2.") -t "2.

CERllRCATE OF INSERVICE INSPECTION I, the undersigned, holding 8 valid commlaalon laeued by the National Board of Boller and Pruaure Veuellnapectons and the atate or Province of  !:i§mlSl and employed by HartflJ!11. ~tesm ~~ lnsoect/2l1 fI!Ut lailllacg Q2. Q/. ~~!J1.

of Hartford. Conn9cticut have lnapected the components described In thla Owner's Report during the period ~ - II to ,.,10- 4OJ.~ and state that to the beat of my knowledge and belief, the awner haa performed examinations and taken corrective measunMI described In thl, OWner's Report In accordance with the requirements of the ASM! Code, SectIon XI.

By signing this certificate nelttler the Inspector nor his emplo)'9r makaa any wamutty, expren8d or Implied, concerning the examlnatlone and corrective meaaunMI described In thla Owner's Report. Furthermore. nelther the Inspector nor his employer shall be liable In any manner for any peflOl1al Injury Of' property damage or a 1088 of any kind arising from Of' connected with this In~

~-~ In pector'. ature Com......... ~,2SZ Natonal Board, State, Province and Endonsements Date JQ J"Arl¢~ ~0i.Ql.

- "~''- ' -~~I1< ... ~.or_, ~.-:-,..~... _~_,, _. __ ~ .._,, _ _

~ .

ORIGINA _

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ......;1...;1...;1...:.1...;1_ _ _ __

-:;0.-. 1. Owner Southem Nuclear Operating Company Date May 2,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Voglle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC470929 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name Authorization No. NIA Plant Vogpe Explralion Date NIA Address
4. Identification of System 1208/CVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ -.!2..,O<::O'-'1...:e"'d:,:....2""OO=3-"a"'d"'d...._ __

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 0300 1CS880000 NIA 2-1208-U6-037 NIA CORRECTED YES 0000S74-0034

7. Description of Work Weld encapsulation cap on check valve
8. Test Conducted: HydrostatiC 0 PneumattcD Nominal Operating Pressure[!j Exempt 0 Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks __ S~ee_lt~e~m_7~ _ _ _ _ _ _ _~~~~~~~ _ _ _~_~_~_~ _ _~ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI .

Type Code Symbol Stam~ NIA Certificate of A oh No h--H'JI--~----'-"':"";------- Expiration Date N/A Signed . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comm isslon Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connectfcut of Hartford. Connecticut have Inspected the components described in this Owner's Report during the period O'S-IZ--(-S to "':i-3<.~-1 '3 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the reqUirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arlslng from or connected with this inspection.

~0:::--'i'~",,

' ,-""'~~_--:---:--::-;-----:--

  • _____ Commissions f'2A 13 Z

.. Inspector's Signature National Board, State, Province and Endorsements Date '3DMCI.,;) 201'3

  • " .....'\'.... ... '.'" ....,. ..........

~ ~. - .'

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAlRlREPLACEMENT ACTIVITY As Required By The Provlalon8 Of Tl'Ie ASME COde Sec:tlon XI Traveler # _--:...11:..,:1..:;12=--_ __

1. Owner Southern Nuclear Operating Company Date January 24, 2012 Name 40 Inv~ Center Parkway. Blnningham, AL Sheet of Addl'88ll
2. Plant VogtJe Electric Generating Plarrt Unit 2 Name Waynesboro, GA 30830 SNC338727 Add..... RepalrlReplac:ement Organization P.O. No., Job No., etc.
3. Work Performacl by _--:.:M:.:::8::;.In:.;;tenanc:.:.:::;;==e..=D;.;epa=1tm=en;:.;.:..t_ Type Code Symbol Slamp NlA Name Authorization No. NlA Plant Vogtle ~~D" __________________ ~w.~~~ __________

AddI'8ll8

4. Idantlflcatlon of Syetam 1208 / Chemical and Volume Control System
6. (a, Applicable Conetructlon Code ASME See. III 1974 edition. Summer 1975 Addenda, _---'-N/,""'~_'__ Code Case (b) Applicable !dltlon of Section XI Used for RepalrlReplacement ActIvity 2001 ED. 2003 ADD.

(e) Applicable Section XI Code C'&e{s)

6. identification Of Component.

NatIonal Corrected, ASMECode Hameof Name of Manufacturw Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identlflc8tlon Built Inatalled ev.. or No}

PIPE SYSTEM ENERGY & 442305 /IVA 2K3*1208-003*01 1999 INSTALLED YES PROCESS CORP

7. Description of Woft( Replaced piping around valve 2HV81 09 to install valve 2HV8109, which was installed under Traveler 11110.
a. Teat Conductacl: Hydroatatlc 0 PneumatlcD Nominal OpenItlng Pr...ureD Exempt[!]

Other D Pressure pal Teat Temp. _ _ _ _ _ "'F

9. Rema~ ~S~ee~lt~8m~7____________~~~~~__~~~~~~~~~~~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the Btatements made In the report are correct and that this conforms to the requirements of the ASME Code, section XI.

Type Code Symbol stamp /IVA

- ._ _---:>..,.---_ _Nl._:4________ ExpIratlon Date /IVA SIgned Date /-2J -(7...

CERTIACATE OF INSERVICE INSPECTION I, the undenalgned. holding a valid comml..lon laeued by the National Board of Boller and Preaaure V....llnspec:ton and the lItate or Provlnc:a 01 GeorgIa and employed by Hartford Steam Boller InsDgcUon W losul8/7C6 ~!1}ut of Hattford, Connecllcyt have Inspected the componente deacrlbec:lln thla Own...** Report during the perIod =t=-_~~ II -I.~I to 1-.llJ -~, and state that 10 the beat of my knowledge and bell.f, the OWner flu performed examination. and taken I,~,,~

corrective m"lUrea deac:rlbec:l In thl. OWner'., Report In accordance with the requirements of the ASME Code,Section XI.

By .'gnlng thla certificate neither the Inspector nor hi. employer rnak. . any warranty. expreued or Implied, concerning the examInation. and corrective m..au.... described In thl. Own..... Report. Furthermore, neither the Inspector nor hi' employer etlan be liable In any manner for any personal InJury or property damage or a loa. of any kind ar1.'ng from or connected with thl.

Ins on.

~~~~~~~~~~?f~?!=--__ Commlsalon. 6-& ZS't.

National Board. State, Province and Endorsements

FORM NIS-2 OWNER'S Rg~~~k~ P~REPLACEMENT As Required By The Provisions Of The ASME Code Section XI ACTIVITY Traveler # --:..1.::;30::.,:0:.=0_,,-_ __

1. Owner Southern Nuclear Operating Company Date June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of Address
2. Plant Vogtl6 EleeJn"c Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376393 Address Repalrl Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorizatlon No. NIA Plant Voqt!e Expiration Date NIA Address
4. Identification of System 1208/eVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2:!!O~01~ed!:!.:.....!2~O~O~3~a~dd!:!.:.'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASM.E Code Name of Nama of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 305002351029 NlA V2-120B-068-H021 NlA INSTALLED YES SUPPORT PIPE PULLMAN POWER 14114 NlA V2-1208-068-H021 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-112 snubber serial nO.14114 was replaced with Usega 301856RF2 serial number 305002351029 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 pneumaticD Nominal Operating PressureD ExemptlKl Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~/rem~7 = _ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~ _ _ _ _ _ _ _ _ _ ___

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA

-,-_ _ _ _ _..;..N1..:..A:...;..._ _ _ _ _ _ Expiration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insuronce Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period 3/'?113 to G I I 7/1::;. ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind ariSing from or connected with this inspection.

/;;::..::::..",.,.~

L-,o"'.::""'---  ; " -------- Commissions 7 Inspector's Signature National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:..3-'-00'-2_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 29, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376395 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. WorK Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Vogtle Expiration Date NIA Address
4. Identification of System 12051 Residual Heat Removal
5. (a) Applicable Construction Code ASME Sec. 111 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2:.:0:..:0..:.1..::ed,-=-.:;20",O:..:3. .a",d:.:d::.:.._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 31105271004 NlA V2-1205-004-H01O NlA INSTALLED YES SUPPORT PIPE PULLMAN POWER 1594f1 NlA V2-1205-004-H010 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-10 snubbar serial no. 15946 was replaced with Lisega 306256RF3 snubber serial number 31105271004 to support2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[K]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~/te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~__~~~~~~~ ______________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

-I7-++---.._--Nl.-':4-'-------- Expiration Date NlA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. ConnecUcut have inspected the components described In this Owner's Report during the period n 21 J4/1-s.

to DCe! ! I ! i"3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

?'/_~- Commissions _ _,---..:....G;~""'
  • /A-'-_a..L.?..l..,3~r:z;;...*_ _ _~_ _ _ _ __

~~iI1Spector'SSlgJlatUl" National Board, State, Province and Endorsements Date  !( :s V!\e 2.0 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tmve~r#~1~30~0~3__________

1. Owner Southern Nuclear Operating Company Date June 01, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Un~ 2 Name Waynesboro, GA 30830 SNC376505 Address RepairlReplacement Organlution P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VQ9.l/e Expiration Date NIA Address
4. Identification of System 12011 Reactor Coolant System
6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity __~2~O~01~ed~.~2~O~03~ad~d=::.____

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 26755 NlA V2-1201-03CJ..H605 1989 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER 20212 NlA V2-1201-030-H605 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA-3 snubber serial no.20212 was replaced with PSA-3 serial number 26755 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[Ej Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=- ___ ~~~ __ ________________

~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code, Section Xi.

o f.,,4

,,0'\'

Type Code Symbol Stamp NlA

+---,:---_ _ _..:.N!.:;.;~...:...._ _ _ _ _ _ _ Explration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 'Z.. /1 Lj / I '?,

to (0/ i 7 /{ 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

---~~ '-7"':'-'",".:::;..--

'_'_/ ...,.2=~-=:.,...~==------. ____ Commissions

~ctor's Signature National Board. State, Province and Endorsements Date 17 '-, U (\ e'0')

--.j L i ..;;,

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .....,:1;.3,::.00=..4.:..-_ _ __

1. Owner Southern Nuclear Operating Company Date May 14, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376508 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. N/A Plant Voglle Expiration Date N/A Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _...:2:.:0:..:0;..:.1-=e:..:d:.:.. . =-20~O:.:3:...;a::.;d:..:d::..:. _ __

(c) Applicable Section XI Code Case{s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serlal .No. No. Identification Built Installed (Yes or No)

PIPE LfSEGA 03615185'27 NlA V2-1301-015-H007 1989 INSTALLED YES SUPPORT PIPE PULLMAN POWER 26940 NlA V2-1301-015-H007 1989 REMOVED YES SUPPORT PRODUCTS

7. Description of Work PSA 3 snubber serial number 26940 'was raplaced Usega 305253RF3 serial number 03615185'27 to support 2R16 initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD ExemptlR]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ QF

9. Remarks _Se~e~/~ffi~m~7_________~_~~~~~______~~~ ______~ ___~~ ____________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the AS ME

~ Code,Section XI.

~,~\~ Type Code Symbol Stamp NlA
  • _-::-____..:.NJ..=.:A:.:.-___________ Expiration Date NIA Superintendent Date

-;Tltle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InsDeclion and Insurance Co. of Connecticut of Hartford Connecticut have inspected the components described In this Owner's Report during the period Z./H /{,3 to (2(') /1 ~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

___ -t-,6.,,:;£:..:~:::..<:..---_'

_/.,.,.,..p(.:;,./-:--:-:--,.-_-v--.=....--_._ _ _ _ _ Commissions _:-:-:.,.:\:.../__'<~-A::-'-_~-:-'-:':3::...L<5r'--::_-:--_--:-=-:-- __,---___

/ InspeCtor's Signature National Board, State, Province and Endorsements

ORIGINAL


FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ~1-=3..::0..:..1.:...1 _ _ _ __

1. Owner Southern Nuclear Operating Company Date April 24, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC421904 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Slamp NlA Name Authorization No. NlA Plant VogUe Expiration Date NIA Address
4. Identification of System 1301 - Main Steam System
5. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2..,O"'O:..:.1-'e"'d"'-. ,!,2"'O""O~3""'a""d"'d.:...._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 308001251021 NIA V2-1301*139*H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 485 NIA V2-130 1- 139*H004 1989 REMOVED YES SUPPORT

7. Description of Work AD-15fL snubber serial no.485 was replaced with Lisega 303956RF2 serial number 30800/251021 to support 2RI6's inifial test scope.
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt I!]

Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~Jte~m_7_ _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~_~~~ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA tl NIA Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolier and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have Inspected the components described In this Owner's Report during the period Q I / 15/ (3 to O$/O~/13 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this inspection.

_ _L&-:~~  :",-:-*_.,..,.~",,::::.......,

  • ---::,.,.----,-_ _ _ _ _ _ _ Commissions "7 Inspector's Signature National Board, State, Province and Endorsements I Date 08 Mt\.j 2..0 I~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # :.:.......1.::.3.:...01;....:3=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 17, 2013 Name 40 Inverness Center Par1<.way, Birmingham, AL Sheet of Address
2. Plant Vogtle Electnc Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376532 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VO!l.tle Expiration Date NIA Address
4. Identification of System 1302 I AFWI CST Degas
5. (a) Applicable Construction Code ASME S6C. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!!2~O.!!.01~ed~.....!!2:.l10~O.l!..3~ad~d~.'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE USEGA 305003281100 NlA V2-1302-109-H013 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARUNG 362 NIA V2-1302-109-H013 1989 REMOVED YES SUPPORT

7. Description of Work AD-503 snubber serial nO.362 was replaced Usega 305253RC7 serial number 305003281100 to support 2R16's initial test scope .
8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt[g]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ OF

9. Remarks _s~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~_ _ ~~~~_~__~~~~~ _ _ __ __________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

---,!>i--H_.,..-_.:...N!..:...:4:.:......._ _ _ _ _ _ Expiration Date NlA Signed ' u rintendent Date {; cc> 1'~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period [ / i<ples to Gp/I 5?/ / '3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requiremants of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pensonal injury or property damage or a loss of any kind arising from or connected with this inspection.


4-~7.'I .. ~;::'

,.'----- 7<-=-.,...'"-=-------,::-_:_. _ _ _ _ _

"7' Commissions -...,,...,....,.,G~.

.;;:.:;.:,_:_:/~~Cj_:'S~J)'---=__:_-__:_:::__:_--_:_--

/lns~tor's Signature National Board, State, Province and Endorsements Date I)?  :::rV!\f 2C )7)

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'-1."-30.;;..1_4_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 29,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376538 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenan~ Dee,artmant Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Vogtfe Expiration Date NIA Address
4. Identification of System 1204 I Safety Injection
6. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2""O""01.:....:::;ed"'.""2""O"'03""""'ad""d"'.'--__

(c) Applicable Section Xl Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 307005611060 NlA V2-1204-14441607 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 196 NlA V2-1204-144-H607 1989 REMOVED YES SUPPORT

7. Description of Work AD-71 snubber serial no. 196 was replaced with Usaga 301856RF3 snubber serial number 307005611060 to support 2R16's initial test scce,e.
8. Test Conducted: Hydrostatic 0 Pneumatic D Nominal Operating Pressure D Exempt~

Other D Pressure _ _ _ _ psi Test Temp.

OF

9. Remarks _S~e~e~I~te~m~7_ _ _ _ _ _ _~_~~~~~~-~~~~-~~~~-~~---------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certJfy that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

+-H4+l-+-----"---'------- Expiration Date NIA Signed erintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georoia and employed by Hartford Steam Boiler InsDection and Insurance Co. of Connecticut of HartfolJi Con,necticut have Inspected the components described in this Owner's Report during the period 01//(0//3.

to fOlZ0I(~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.


.'~~r~=-* ~_"---:>"~

..~~_ . _ _ _ Commissions ----,-,--Q"-"=~A'"'--,',_C,-+,=-I-S:-'----','b~_~.,_________ _

7~lOSPe~ National Board, State, Province and Endorsements Date 1J:O::SvI\Q,20(i:,

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --..:1..::3.::.0..:.c15=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 17, 2013 Name 40 Inverness Center Parkway, Binningham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376542 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VOfl!.le Expiration Date NlA Address
4. Identification of System 1301 1 Main Steam System
6. (a) Applicable Construction Code ASME Sec, 11/ Edition, 1977 Addenda. Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,!2~O~O.!.1~ed~,-,!2~Q~O::.3~a~dd~,,--__

(c) Applicable Section XI Code Case(s) N-249- 1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (yes or No)

PIPE LlSEGA 307005611052 NlA V2-1301-110-HOO2 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 1211 NlA V2-1301-110-H002 1989 REMOVED YES SUPPORT 7, Description of Work AO-73 snubber serial no,1211 was replaced Usega 301856RC7 serial number 307005611052 to support 2R16's initial test scope,

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating pressureD Exempt[Kj Other 0 Pressure _ _ _ _ psi Test Temp.

OF

9. Remarks _S~e~e~/~te~m~7__________~_~~~_~_ __~_______~_______________________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code.Section XI.

Type Code Symbol Stamp NlA

-&--/-t'-------.,--"-"------------ Expi ration Date N/A Date D'9-0<0/3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co, of Connecticut of H8rt1ord, Connecticut have Inspected the components described In this Owner's Report during the period I 1 I (iC'113 to (P/I '-) 1 13 , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance w ith the requirements of the ASME Code, Se<;tion XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

___-L.:~~.2!: '-'.:....~

-:?-':;?

~' ----- Commissions 7 Inspector's Signature National Board, State, Province and Endorsements Date I 'J "3 V n<£':- 7.t) I~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1-"3-'-0_16-'-_ _ _ __

1. Owner Southern Nuclear Operating Company Date April 26, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376544 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vog.tle Expiration Dale NIA Address
4. Identification of System 1301- Main Steam System
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda , Winter 1977 (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _--"2..,O",O,-,1...,e.,d'-'..-"2~003=-,,ac>::d,,.d.:..-._ _ _

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE L1SEGA 312008131027 NIA V2* 1301-127*H071 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 1190 NIA V2-1301*127*H071 1989 REMOVED YES SUPPORT

7. Description of Work AD-71 snubber serial no. 1190 was replaced with Lisega 30 1856RF3 serial number 312008131027 to support 2R16's initial test scoe.e.
8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating pressureD Exempt[j Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7~ _ _ _ _ _ _ _~~~_~_~ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI .

Type Code Symbol Stamp NIA

-i'.Lfi--....___N.c..::..:.VA.:......_ _ _ _ _ _ Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Insoection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described In this Owner's Report during the period 02,//'$//"3 to DS/OI // 3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

--~--'~~or_=---;--~..:;.o""'-~::_:_-~------- Commissions GIl 933

' - "' , 7

  • iflSPectof'SSi9flature Nationai Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --'1..:;3..:;0.;..18"--_ _ _ __

1. Owner Southern Nuclear Operating Company Date April 26, 2013 Name 40 Inverness Center Parkway. Birmingham, AL Sheet of Address 2, Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376548 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vog.tle Expiration Date NIA Address
4. Identification of System 1301 - Main Steam System
5. (a) Applicable Construction Code ASME Sec. /1/ Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2.,O",O"'1..."e"'d:..:....::2""O""O"'3"'a"'d""d.:.-._ _

(c) Applicable Section XI Code Case(s) N*249*1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 30700491 I 116 NIA V2-1301-126*H031 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 504 NlA V2*1301-126-H031 1989 REMOVED YES SUPPORT

7. Description of Work AD-153 snubber serial nO.504 was replaced with Lisega 303856RC7 serial number 307004911116 to support 2R16's initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating pressureD Exempt[Rj Other D Pressure _____ psl Test Temp. _ _ _ _ _ _ DF
9. Remarks _S~ee~lt~em--,7--, _ _ _ _ _ _ _~~~~~_~ _ _~~_~ _ _ _~_~ ____________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA t---:-_____N_JlA_ _ _ _ _ _ _ Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described In this Owner's Report during the period 01//(0/13 to 05"/0 i/l]l , and state that to the best of my knowledge and bellel, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss 01 any kind ariSing from or connected with this inspection.

---,~>""'::~~~-~==----:,...~'V-__.,_---=------------ Commissions

/ TnSj)6Ctor'SSignatUre National Board, State, Province and Endorsements Date 01 MA. WI3 J

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_30--"9_ _ _ __

1. OWner Southem Nuclear Operating Company Date May 28,2013 Name 40 Invemess Center ParKway, Birmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376549 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name AuthOrization No. NIA Plant Vog.t'e Expiration Date NIA Address
4. Identification of System 1301- Main Steam System
5. (a) Applicable Construction Code ASME Sec. III EdItIon, 1977 AddQnda, Winter 1977 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _-=2.... 0:..Q1.:...e"'d=:;.-=2:=O""03::....::;ad,.,d""._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 30500263136 NlA V2-1301-136-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 490 NlA V2-1301-136-H004 1989 REMOVED YES SUPPORT

7. DeSCription of Work AD-153L snubber serial nO.490 was replaced with Lisega 303956RC7 serial number 30500263136 to support 2R16's initiel test scope .
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks See Item 7

~~~~-------~A-p-pl~lca~b7Ie~M~a-n-Ufa~ct~u-r-e~r8~D~a~ta~R~e-p-o-rts~t~o~b~e-a~tta~c~h-e~d------------

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

~~ Type Code Symbol Stamp NlA

-DoL1h1ll---..,...-_ _Nl._:4_ ______ Expiration Date NlA Signed' Date si~81l3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NatIonal Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart1ord, Connecticut have Inspected the components described In this Owner's Report during the perIod 01/ i (o/{ '3 to 0(£/(0113 , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any pel"9onal injury or property damage or a loss of any kind arising from or connected with this inspection.


.~""""'~-:---"/;..=~-:--::-:----:----- Commissions S -=-3--=..<<S--,-----_--=---:----_ __

  • , Ii-,--'*-,-

_---->....:::C=-:..L Inspec~to ...s I Signature N atlonaI Boa rd , State, P rovlnce ' an d End orsements Date /0 "1 u !\.(.lD I .~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'.1..:.3-'-02;;..1'--_ _ __

1. Owner Southern Nuclear OperaUng Company Date May 30, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376560 Address Repair/Rep/acement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NIA Plant VOQtle Expiration Date NIA Address
4. Identification of System 1301 I Main Steam System
5. (a) Applicable Construction Code ASME Sec. fII Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....::2"'O"'-01.:..=ed"".....2""OO:z.3"-'O.ad""d".,._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE ANCHOR DARLING 224 NlA V2-1301-104-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 245 NlA V2-1301-104-HOO2 1989 REMOVED YES SUPPORT

7. Description of Work AD-5503 snubber serial no. 245 was raplaced with AD-5503 serial number 224 to support 2R16's initial test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[Ej Other 0 Pressure psi Test Temp. _ _ _ _ _ _ OF
9. Remarks _S~e~e~/~te~m~7_ _ _ _ _ _ _~__~~~~~~_~~~=- ____~__~___________________

Applicable Manufacturer's Data Reports to be attached

. CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

,,0, Type Code Symbol Stamp NlA

~ ~~

olJ..."" Certificate of Autho~~atio~NO~ \.________-'-N/,.:;.~_'_________ Expiration Date NlA Signed v\* \;;;'~.r" b Superintendent Date _~.......1.\.l..n""""\.l..n~___

Owne~r Owner's Designee, 'tItle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Geomia and employed by Hartford Steam Boiler InliPection aiJSJ Insurance Co. of Connecticut of Hartford. Connecficvt have Inspected the components described In this Owner's Report during the period (') ' / /{/ / / "<

to e(e /2 ;:./ i " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the Bxaminations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a IOS5 of any kind arising from or connected with this inspection.

~ ________ ~~- Commissions ---:~C::_---.-,,' A

~---,:-9 -:;:3'.,--:-<<,'---=----:-_---:--=-:--_--:-_ ___

_~s S i g n a t u r e . National Board, State, Province and Endorsements Date 25 :Jl.'l\f LC 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--:.1..::.3.:.;02::.,:3'--_ _ __

1. Owner Southem Nuclear Operating Company Date June 01, 2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electn"c Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376567 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance De£!.artment Type Code Symbol Stamp N/A Name AuthOrization No. N/A Plant Vogpe Explrallon Date N/A Address
4. Identification of System 13021 AFWand CST Degas
6. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _""2..,O",,O:.:.1...::ed==- . .:.20""O:..:3,-,a~d""d::.._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE USEGA 306006571124 NlA V2-1302-109-H025 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 672 NlA V2-1302-109-H025 1989 REMOVED YES SUPPORT

7. Description of Work AD-1603 snubber seriel no 672 was replaced with Usege 306256RC7 serial number 306006571124 to support 2R16's initial test scope
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating pressureD Exempt[Rj Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Rema~s ~S::..:e::..:e~/~le~m~7_ _ _ _ _ _ _ _~_~~~~~ _ _~~_~ _ _~ _ _~__~ ___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA h4t-h'--_ _ _-'-Nl..::..:....::4_ _ _ _ _ _ Expiration Date NlA Signed rintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hertford Steam Boiler Inspection end Insurance Co. of Connecticut of Hertford, Connecticut have Inspected the components described In this Owner's Report during the period r) / /1 ft* 1/'3 to 0(",/11 /13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

__L-b-:>.~:6-"~==-:

  • -~r_~*

.d-"__:_

  • --=:-~~:-_-_ . ___ !l~~~

Commissions ---:-.-G,:,:,"---,,,,,,

- ,-()':-'-?5"~__=____:--:_=__:_ _ __:_---

7 '" Insf5eCtOf'SSignature National Board, State, Province and Endorsements Date II :IIWe.. 20) :3

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIRJREPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..;,.3.:...02.;..9'--_ _ __

1. OWner Southern Nuclear 0pereting Company Date May 10, 2013 Name 40 Inverness Center Parkway, Binningham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30B30 SNC3765B2 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NIA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. /JI Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...:2"'O... ed""...:2"'

01........ . O"'O,.,3..,a""dd""'-

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE ANCHOR DARLING 752 NlA V2-1208-002-H004 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 750 NlA V2-1208-002-H004 1989 REMOVED YES SUPPORT

7. Description of Work AD-41 snubber serial no. 750 was replaced AD-41 serial number 752 to support 2R16's augmented test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD ExemptlK!

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Rema~s ~S~e~e~/~te~m~7_ _ _ _ _ _ _ _~_~~~~~___~~-~--~~-~-------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA NlA NlA Signed rintendant Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period I /i (oil "]

to ( 1/1! / 1:3 , and state that to the best of my knowledge and belief, the Owner has performed exam inations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

~/~-_________ C I '

--7~;;40:"':':::"---'I-ns7)p""e""c..,.to-r'..,.S-=S:-lg-n::.a-:-tu-r-e-------- omm sSlons National Board, State, Province and Endorsements Date 1\ -:}uf\e ZCt3

ORIGINA FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1..:;3~03::..;0,-- _ _ __

1. Owner Southern Nuclear Operating Company Date May 28, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376584 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogt/e ExplraUon Date NlA Address
4. Identification of System 1301/ Main Steam System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Sect/on XI Used for RepalrlReplacement Activity _""2""O""Oc.:.1,."e",,d,,-... 20""O",,3<.,:a,.,d,.,d..._ __

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 312008131024 NlA V2-1301-109-H002 NlA INSTALLED YES SUPPORT PIPE ANCHOR DARLING 697 NlA V2-1301-109-H002 1989 REMOVED YES SUPPORT

7. Description of Work AD-73 snubber serial nO.697 was replaced by Usega serial number 312008131024 to support 2R16's augmented test scope.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[E]

Other D Pressure psi Test Temp. OF

9. Remarks ~S::..;e~e~/~te::..;m~7__________~__~~~~~ _ _~~~~__~~~~~_~_________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp , NlA

_ _ _ _ _ _ _.;..N1.::..;I4..:-_ _ _ _ _ _ _ Expiration Date NlA Signed

/

Date -5/a:r/ /3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford Connecticut have Inspected the components described in this Owner's Report during the period 01/1(,,/13 to 0(', 110/ 13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

-;:;~-~-


~~~~'~I~ns~pe--c-to~r~'s~S~I*g-n-a-tu-r-e------------

Commissions ('~ A ~:3 g

--~N~at-I~~I~B~~d~S~ta~t~P~~*~--~d~E~d~-----ts--------

ona oar,

  • e, rovmce an n orsemen Date IC::s"v/le-ZO 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #I --,1..:;3~03=-=2=--- _ _ __

1. Owner Southern Nuclear Operating Company Date May 10, 2013 Name 40 Inverness Center Parkway, Birmingham. AL Sheet of Address .
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC376585 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee!:!.rtment Type Code Symbol Stamp NIA Name AuthOrization No. NIA Plant VOfl.tle expiration Date NlA Address
4. Identification of System 13011 Main Steam
5. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2""O,!<01.:..=ed"".....,2""O"'Q""3.,.a".dd"".'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE LlSEGA 312008131029 NJA V2-1301-"'-H002 1989 INSTALLED YES SUPPORT PIPE ANCHOR DARLING 695 NJA V2-'301-'1'-H002 1989 REMOVED YES SUPPORT

7. Description of Work AD-73 snubber serial no.695 was replaced Lisega 301856CR7 serial number 312008131029 to support 2R16 's aUfl.mented test scope.
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt~

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~S=-=ee~l~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~-~~~~~-~-------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NJA Certificate of Auth NJA Expiration Date NJA Signed Superintendent Date nee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Stlism Boillir Inspection and Insurenr;e Co. of Connecticut of Hartford: Connecticut have inspected the components described in this Owner's Report during the period I liC" /I]?

to &71~ 213 ' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or B loss of any kind arising from or connected with this Inspection.

---'~~::::.-~---,.-/<T;---7~rt_

. ~~::__::..,-----_  ::::-'::=-A!.:-=:-(1.l......=:3:,-CO'~_=---:--_--:-=--:--_--:- ___

7Tns~'Yo'r'SSignature

__ Commissions _,.,.-G National Board, State, Province and Endorsements Date Ilj ~ Jf\.P ZQ \ 3

L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---,1.::.3~03:.:7_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 11, 2013 Name 40 Invemess Center Parkway. Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Weynesboro, GA 30830 SNC446714 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NIA Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-"2'-"O.:.01..:....::.ed"'.'-'2...00=3-=a""dd"'.:.--_=-.....;..;~-

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL 00-63 NlA 2HV3016A NlA CORRECTED YES

/NTERNA TIONAL

7. Description of Work Replace Gate on 2HV3016A
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressure[R] ExemptD Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _See~~/~re~m~7__________~_~~~~~~_~~~=- ~~~~~ ~ __ __ ______________________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Sta NlA

-hlf-llf----..:..N!,:.:}:\-'-------- Expiration Date NIA Signe . uperintendent Date 6'/dO IoV13 CERTIFICATE OF INSERVICE INSPECllON I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Geomle and employed by Hartford Steam Boiler Ins!)8ction and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period . 3/1'\ / J ~

to c;. /'2- $'11 J. . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthennore, neither the Inspector nor his employer Shill' be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

/"

?~~ Inspector's Signature Commissions _:'!'f"'":*~:'-

, A~,...:9::::.~c::..,.-'?:--::--:-:---=-~_----:-:=--~--:----

National Board, State, Province and Endorsements Date z..s -:J \/.'\ .. 2 D I ~

1. Owner Southern Nuclear Opera ling Company ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Date Traveler it ---'1-=3..:.0-=.38.:......_ _ _ __

May I, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446715 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Voglle Expiralion Dale NlA Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _~2~O~01"-",ed"".~2~O~03::!....!!.ad~d",,._ _  ::::----'-'-=---

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL OE-78 NIA 2HV3026A NIA CORRECTED YES INTERNA TJONAL

7. Description of Work Rep/ace Gate on 2HV3026A
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating Pressure[R] ExemptD Other D Pressure _____ psl Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~l/-=.em~7---, _ _ _ _ _ _ _~~~~~_~~_~~~~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA H+-_---:;o..--_ _N_YA_ _ _ _ _ _ _ Expiration Date NIA Signed Date 5lC't(L~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BOiler Insoection and tnsurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3 I 3 to CXr,- 0' \:, , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions

.- I Date ii1;pector's Signature OL(JUf\¢., -; 0 /,3, National Board, State, Province and Endorsements

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..........;1..:;3.,:.04.;..0'--_ _ __

1. Owner Southern Nuclear Operating Company Date May 1, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446717 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NlA Name AuthorlzaUon No. N/A Plant Vogfle Expiration Date N/A Address
4. Identification of System 1301 I Main Steam
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1977 Addenda, No (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-=2",O",-01.!...!Ced",.-=2",O:,:O:::.3.=.a::::;dd",.,--_:::--'-'-=--

(c) Applicable Section Xl Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE ROCKWELL OC-11 NIA 2HV3006B NlA CORRECTED YES INTERNA T10NAL

7. Description of Work Replace Gate on 2HV3006B
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating pressure[!] ExemptD Other 0 Pressure psi Test Temp. _ _ _ _ _ _ *F
9. R~arks ~S~e~e~/~te~m~7_ _ _ _ _ _ _~_~~~~~~_~~~=----~~--~------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

N/A

+/--hH-....c;,;:c--.;...:;.;-'------- Expiration Date NlA Signed -f-~=-"""--"_'_':!:'-¥-~-:::.=':..:-:""--~..,..L-::..:u:.<O.pe:..:.nc..c*nt:..:..:en.;.::d..:..;en~t Date$/df /13 CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford. Conneciicut have inspected the components described in this Owner's Report during the period Q3/ 1"1 / I ;'

to OG(/ 0/13 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken cOl'Tective meaSures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspectlon.

___~U~~=.......,,...*..:;.e=L---:

  • ~---:---=:7----:- _______ Commissions

/~ Inspector's Signature National Board, State, Province and Endorsements Date i(' "0 i wi? 20 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY Ae Required By The Provisions Of The ASME Code Section XI Tmv~#~1~304~3~________

1. Owner Southern Nuclear Operuting Company Date June 11, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet 1 of 1 Address
2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC446720 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenanoo Department Type CO<kJ Symbol Stamp NIA Name AuthorIzation No. NlA Plant Vogtle ExpIration Oats NIA Address
4. Identification of System 1301 I Main Steam
6. (a) Applicable Construction Code ASME Sec. til Edition, 1977 Addenda, ____'-"N..:;. O___

(b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ....2"'0c::.01....... ed,.,.....20=03=-=add.....,.'--___

(e) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name Component 0' Name of Manufacturer Manufacturer Serial No.

Board No.

Other Identification Year Built Removed, or Installed Stamped (Yes or No)

VALVE ROCKWELL OG-06 NIA 2HV3036B NlA CORRECTED YES INTERNA TlONAL

7. Description of Work Replaoo Gate on 2HV30368
8. Test Conducted: Hydrostatic 0 pneumaticO Nominal Operating Pressure[Rj Exempt 0 Other 0 Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ oF
9. Remarks ~S~~~I~w~u~/7~___________~~~~~--~.~~~~~--~--~~~~~--------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE Of COMPLIANCE I certify that the statements made in the report are correct and that this confonns to the requirements of the ASME Code,Section XI .

Type Code Symbol Stamp NlA Certifi~o. /IVA Expiration Date NlA Signed ~~1l.1'Ut4. 4>e..; Superintendent Date lr/1' 2{) j"$

Owner or Owner's Designee, Tltie CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission i&sued by the National Board of Boller and Pressure Vessel Inspectors and the atste or Province of Georgia and employed by Hartford Swam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period '2. / i"l / l -S to Q/I')/13 , and state that to the best of my knowledge and belief, thit Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the AS.ME Code, Sectlon XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impl~d, concerning the examinations and corrective measures described In this Owner's Report. Furthennore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

_ _ _-'o ~_  ?---"

" /~~-=_-:--_. _ _ _ _

_7 Commissions ~:-:-:-:-,f_:.~A::-<-S-,-:.;.:::3:-:-,,"

  • ~ * --::---::--_-:-=-:-_ _-:--_ _

7tOSPe6tor'a Signature National Board, State, Province and Endorsements Date La/h ! i :3

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Tra veler # --'1..;.3..;.0.;,.53-=----_ _ _ __

1. Owner Southern Nuclear Operating Company Date May 2. 2013 Name 40 Inverness Center Parkway. Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 30B30 SNC470969 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorization No. N/A Plant Vogtle Expiration Date NlA Address
4. Identification of System 120B / CVCS
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _..::2""'OO><.1'-e::.:d.:....~2""QO""3~ad~d.:...._ _ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CSBBOOOO NIA 2* 120B*U6*03B NIA CORRECTED YES 0000

7. Description of Work Weld encapsulation cap on check valve
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressurn[Rj ExemptD Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7~ ______ ___~~~~~_~____~~__~ ____~___~~ ______________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NI A

/"J-_..".-_ _ _-:N..;;,V.,:..;I'I:....._ _ _ _ _ _ Expiration Date NIA Signed Date 5 *.,j'j"- { .3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, ConnectiC(jf have Inspected the components described In this Owner's Report during the period Q 3 / 1 "S /1 ;:,

to 0(,,/0</ / [ ~ ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the reqUirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

~~

7 Inspector's Signature Commissions _-:-:-":-(.""~,'-"A':-::--'~'_3"7-:Z~7__:__=_~:__-___:"'=_:__--_:__--

National Board, State, Province and Endorsements Date 0 '1 ::fUM LC I 3

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME C~de Section XI Traveler # -.:.1;::.30:.,:5:..;.7_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 11, 2013 Name 40 Inverness Center Pa.rkway, Birmingham, AL Sheet 1. of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC456322 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by MaintenanC8 Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Explnrtlon Date NIA Address
4. Identification of System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Acldiinda, W 1972 add.

(b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _..!2:!!O~O.1..1.xed~.~2~OO=3..ea~dd~.,-__

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Correeted, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PUMP WESTINGHOUSE 4-9744D35G01 NlA 21201P6002 NlA CORRECTED YES

7. Description of Work Replace the Rep S1381 par;kaga.
8. Test Conducted: Hydrostatic 0 PneumaticO Nominal Operating Pressure~ Exempt 0 Other 0 Pressure psi Test Temp. _ _ _ _ _ "1=
9. Remali!s -'S::,:OO=.,:/.:.:te::..:m.:....:....7_ _ _ _ _ _ _-::--::--:-.,..--::::---::---:_

Applicable Manufacturers-Data Reports to be attached CERTIFICATE OF COMPUANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certlflcata of Authorization No. NlA Expiration Date NlA Signed \r. t ~L\Jk\

Owner ori>Wner's Designee, T tie

~ Superintendent Date ~ ) \ \ h~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler /nsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components de$crlbed In this Owner's Report during the period -z../C:G::'/; :3 to (£/I'l/i "> , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measul'&s described In this Owner's Report in accordance with the requirements of the ASME Code, Sectlon XI.

By signing this certlflcate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.


'~'-; .""> ~""v-~-.-pec

...~""~to'--r'-S *-=s-Ig....;;n-a-tu-I'&-*- - - - Commissions --;-N:-at-::lona-,"b"':;:.::,I:'-Oa--J..J.rd7':"'.:s~~":te-,-:p::-ro~vi:-nce--a-nd-:-::E:-nd"';'o-rs-em-e-nts:-----

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=,3,:..060::..::..._ _ _ __

1. Owner Southem Nuclear Operating Company Date June OS, 2013 Name 40 Invemess Center Parkway, Binningham, AL Sheet of Address
2. Plant Vogl/e Electric Generating Plant Un~ 2 Name Waynesboro, GA 30830 SNC376568 Address RepairfReplacement Organization P.O. No., Job No., etc.

3, Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name AuthOrization No. N/A Plant Vogtle Expiration Date NIA Address

4. Identification of System 1201 - Reactor Coo/ant System
6. (a) Applicable Construction Code ASME Sec. III Edition, 1977 Addenda, Winter 1977 (b) Applicable Edition of Section XI Used for RepalrfReplacement Activity _....:2"'O""01.:....:,ed"".""2""O""O""3.::.a;::;dd"".'--__

(c) Applicable Section XI Code Case(s) N-249-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PAUL MONROE 913 NlA V2-1201-86-002-S006 1989 CORRECTED YES SUPPORT

7. Description of Work Replace control valves on snubber
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureD Exempt[!J Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~e~e~lte~m_7_________~__~~~~~________~=- _____~__~_~___________________

Applicable Manufacwrer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

(l."-& Type Code Symbol Stamp NlA O "-'oSJ\\

N/,'1'1A . I Explrat on ateO N . "/1'1A Signed

\"."

rintendenl Date 6 -9 -O?Qr~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boifer Inspection and Insurance Co. of Connecticut of Hf!l!;0rd Connecticut have inspected the components described in this Owner's Report during the period 03./Q7/1 ~

to _/11713 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection .

. --?~-


c,...~:;;;;.<~~--.,...~c:;..::==_--=---------- Commissions Z~r'S Signature National Board, State, Province and Endorsements Date II 10{\".2013

ORIGIN FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --clc..::3c.::0..:.6.::.3_ _ _ __

~ 1. Owner Southern Nuclear Operating Company Date May 2, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC470B63 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Voqtle Expiration Date NlA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. Iff Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _...,2",OO.::<..!..1-"e""d,-,.2..,O",O",3,->a""d""d",._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CS880000 NIA 2* 120B*U6-036 NIA CORRECTED YES OOOOS74-0036

7. Description of Work Weld encae.sulation cae. on check valve
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureOO ExemptD Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S.::.ee~~/t~em~7_ _ _ _ _ _ _ _~~~~~_~~_~~_~_~~~ _ _~~ _ _ _ _ _ _ _ _ _ _ ___

Applicabie Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate (\' ' AI----,,_----.:..N.;;;yA;.;....------ Expiration Date N/A Signed Date 5/1/13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have Inspected the components described in this Owner's Report during the period 0 3./,-;,,113 to o(p/C~I/ i 3 ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

~~- .-.------.- Commissions _ _ -,=:-:::;:A.:..

~ fI--'--(..l.}-,3,,----,,'i{,-- _ _,--_ _ _ _ _ _ _ _ __

7 ' Inspector's Signature National Board, State, Province and Endorsements Date 0 4:S LHI{?, zC 13

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # .--'1.c:3.c:0,;:.64.;...._ _ _ __

~ 1. Owner Southern Nuclear Operating Company Date May 2,2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address

2. Plant VogtJe Electric Generating Plant Unit 2 Name Waynesboro, GA 30B30 SNC470599 Address RepalrlReplacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name Authorizalion No. NIA Plant Vog,tJe Expiration Dale NIA Address
4. Identification of System 120B/CVCS
5. (a) Applicable Construction Code ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _""2""OO=."1....:e""d""...:2""OO=3,.,,a"'d"'d"'-._ _ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or NO)

CHECK VALVE WESTINGHOUSE 03001 CSBBOOOO NIA 2-1208 -U6-035 NIA CORRECTED YES 0000S74-0035

7. Descrlptlon of Work Weld encapsulation cap on check valve
8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating PressureOO Exempt 0 Other 0 Pressure _____ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks ~S~e~e~/~re~m~7__________~_~77~~~_ _ _~~~~_ _~_~~_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the reqUirements of the ASME Code,Section XI.

Ie"" \~

\

Type Code Symbol Stamp NlA 1,\" /-zIl-_____-'-Nl..:..:...;A_ _ _ _ _ _ Expiration Date NlA Date 5f9/B CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of GeorQia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ~J~--,(.. *3... _-,-1.::::3'---:---:-_1 to <0-1'8 -1:S , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection.

r Date

/~~-

Inspector's Signature cell ~ /2t? i 3 Commissions National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _'_3_0.;;,.66'-_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 17, 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vagtie Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC343656 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VogUe Expiration Date NIA Address
4. Identification of System 120B/CVCS
5. (a) APplicable Construction Code ASME Sec. III Edition, 1974 Addenda, Summer 1974 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _....!2~O~O~1....:!e~d~. .!:2~O~O)!.3~a~d~d.!-._ _ _

(c) APplicable Section XI Code Case(s)

6. Identification Of Com ponents National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE WESTINGHOUSE 03001 CS8BOOOO NlA 2-1208-U6-037 NlA CORRECTED YES 0000574-0034

7. Description of Work Replace components on check valve.
8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureOO ExemptD Other D Pressure psi Test Temp. _ _ _ _ _ _ oF
9. Remarks _S~ee~lt~em~7_ ________~~~~~_~ _ _~~_~ ____~~__~~ _________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol 5t N/A H'+ift---,r-_--'-N:;..;VA..:...._________ Expi ration Date NlA Signe ,Superintendent Date 6'/020 l~13 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hart10rd Steam Boiler Inspection and Insurance Co. of Connecticut of Hart10rd~COnnecticut have inspected the components described in this Owner's Report during the period Q1/"1 / (~

to WZ.<p~13 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~/~ Commissions _-"t=~,,:,-' !l-'--~()-:-:s=-'75_,..--____-:-___:_::__:_-----

~ Inspector's Signature National Board, State, Province and Endorsements

ORIGINAL FORM NIS*2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # --,1..::3.::.06;::7~ _ _ __

1. Owner Sou/hem Nuclear Operating Company Date May 7, 2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of 1 Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC472922 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NIA Plant VogUe Explratlon Date NIA Address
4. Identification of System 1305 / Condensate and Feedwater Syst9m
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1974 Addenda, Summer 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _-,2",O",OC!.1.."e",dc:...'.20",O,.,3,-,a",d",d~

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

CHECK VALVE ANCHOR DARLING E9001-97-8 NlA 2-1305-U4-077 NlA CORRECTED YES

7. Description of Work Replac9 hinge pin stud cover and nut
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt[Rj Other D Pressure Test Temp. _ _ _ _ _ _ oF

- - - - psi

9. Remarks _S;::e~e~/~re~m~7_ _ _ _ _ _ _~_~~~~~~_~~~~_~~~~~~~_ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol S)/if NlA Certificate 0

  • I r[,f7n-.,.......,~-_---'N!...:.;..;:4~- _ _ _ _ Expiration Date NlA Signe 1-/ ' rintendent . Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Confl6Cticut of Hartford, Connecticut have Inspected the components described In this Owner's Report during the period Q 3./H I ( -:)

to Q::,-/;"o/; 3. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

/"~~----

~

---,s,-:&~:.c:_::--:7'.z".z.z,-",,~::...-~-:-

~-::-:-_~_ _ _ _ _ _ _ Commissions

- ~ Inspector's Signature National Board, State, Province and Endorsements Date 30Mo-j 2013

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---o1,.:c3.:..06;:.;8:..-_ _ __

--... 1. Owner Southern Nuclear Operating Company Date May 9,2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC469288 Address RepalrlReplacement Organization P.O. No., Job No., etc.

3, Work Performed by _ _;.;,M;.::a;.;,in;;.;te:.;,n:..::a""n=.;ce::..::;Da""pc8:.:.rt.::,m:;.;e:.;,n;.;,t__ Type Code Symbol Stamp N/A Name Authorization No. N/A Plant VogUe Expiration Date _ _ _ _ _ _ _ _ _ _ _N._VA _ _ _ _ _ __

Address

4. Identification of System 120B/CVCS 5, (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity _..:2"'O""01..:....>:.ed"'.""2""O""O=.3""a""dd"'.'--__

(c) Applicable Section XI Code Case(s) 6, Identification AOf Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE FISHER 9318722 NlA 2FV0121 1985 CORRECTED YES CONTROLS

7. Description of Work Replace valve stem / plug assembly
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt 00 Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF
9. Remarks ~S.:..ea~/:.::te:.:.m~7_ _ _ _ _ _ _~_~~~~~~__~~-~--~~-~~------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N1A

,W*_-,-_ _..;..N!..;;.;~.-_ _ _ _ _ _ Expiration Date NlA Date c'i Idc:L/d) 0 1.3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam BoNer Inspection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 03 ' 1:S to 0<9 **0 2-* 13 , and state that to the best of my knowledge and belief, the OWner has performed examinations and taken cOrl'9Ctive measures described in this OWner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspe*ctor nor his employer makes any warranty, expressed or implied, concemlng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this InspecUon.

--c2~_;,.,

7/ . ~_.~-,/-n**s-~:rl"S

.; ;.~-c:-=-: ~ -

ct...o" -:r'/:. s7-: *s,.,.ig-n-a. .;t- - - - u: :re~----

- Commissions _.,..,...~{-_~"".,-1f~_°..L7-,:~\L.S<'.u.,=---:-__

National Board, State, Province and Endorsements

-:--=-:-_ _-:-_ __

Date n 7 ::s \lAc::. 70 (-S

ORIGINAL


. FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _1..:.3.:..0_74_ _ _ __

1. Owner . Sauthern Nuclear Operating Company Date May 28. 2013 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogtle Electric Generating Plant U~t 2 Name Waynesboro, GA 30830 SNC135383 Address RepairlReplacement Organization P.O. No., Job No., etc.
3. Work Perfonned by Maintenance Depertment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VogtJe expiration Date NlA Address
4. Identification of System 12011 Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. /JI Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repalr/Replacement Activity _-=2",O",-01.:..=,ed""...,2:.::0",O""3..::a",d",,d:..._ _

(c) Applic.able Section XI Code Case(s): 1484-3, 1528*3. and N-474-1

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

S TEAM WESTINGHOUSE GBGT*1982 NlA 2*1201*86-003 1982 CORRECTED YES GENERATOR

7. Description of Work Install mechanical tube plugs in tube location R56*C82 (Hot and Cold Leg Side)
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD ExemptOO Other D Pressure psi Test Temp.

OF

9. Remarks ~S~ee~~/re~m~7______________~~~~~__~~~~~~~~~~__~~~_______________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

!l. Type Code Symbol Stamp NlA

~<;># NIA ol,~ rY----,_----Nl.-;I\---------- Expiration Date Signed rintendent Date 5/;2Rf ~3 CERTIFICATE OF INSERVICE INSPECTiON I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by HfJrtfSl1'SL s.mam Boiler InsDection and Insurance Co. of Connecticut of Hartford, Connecticut have inspected the components desCribed in this Owner's Report during the period 0':)/1<\ / I :>

to rxRlwl 1';' , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correctIve measures described in this Owner's Report. Furthennore, neither the Inspector nor hIs employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_---<?::;..".

.~

-:-.r/.;...,-.....?

~'"'<:::....-~-:--:--:----:_:__.,:_

~ - ._______ Commissions 7" '~tor's Signature National Board, State, Province and Endorsements Date ( C:S';/if Z/) 13 i

\~

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ........;1..:.3.;;.0'-'75=--_ _ __

1. Owner Southern Nuclear Operating Company Date May 28, 2013 Name 40 Inverness Center Parkway, Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 SNC135383 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp NlA Name Authorization No. NIA Plant Vog,tle Expiration Date NlA Address
4. Identification 01 System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition 01 Section XI Used for Repair/Replacement Activity _-<2~O::::O:..!1-,e""d"".-"2:!,O::<O",3-"a."d",,d,-._ __

(c) Applicable Section XI Code Case(s): 1484-3. 1528-3. and N-474-1

6. Identi1ication Of Components National Corrected, ASME Code Name of Name of Menufacturer Board Other Year Removed, or Stamped Component Manu1acturer Serial No. No. Identification Built Installed (Yes or No)

STEAM WESTlNGHOUSE GBGT-1983 NIA 2-1201-B6-002 1983 CORRECTED YES GENERATOR

7. Description of Work lnstaJ/ mechanical tube e.lugs in tube location R15-C60 (Hot and Cold Leg Side)
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _S~e~e~lt~em~7_ ___________~~~~~__~____~~~=-__~_~~~~~___________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA

't'\~ +Ai-_-=-_____N!.~;4"--_________ Expiration Date NIA rMt}\\~

Signed Superintendent Date 6'" -dO -&0 1:5 itle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler InSD8ction and insurance CD. of Connecticut .

of Ha/ford. Connecticut have inspected the components described in this Owner's Report during the period 3/B/} :5 .,

to Jz /1-5 /, '> ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions GA 93[

~~ National Board, State, Province and Endorsements Date Z. S 'J,) ~e-lO , :)

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ----'1.,:;3.:;.0,;..76=-_ _ _ __

1. Owner Southern Nuclear Operating Company Date June 12.2013 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of Address
2. Plant Vogtle Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC474685 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance D(}Rartment Type Code Symbol Stamp NlA Name Authorization No. NIA Plant Vog,tle Expiration Date NlA Address
4. Identification of System 1205 I Residual Heat Removal
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1971 Addenda, Winter 1972 (b) Applicable Edition of Section XI Used for RepairlReplacement Activity __-'2..,OO:.l<...!.1,.,e",d:..:,.""2"'O""O"'3,."a""d""d,:....___

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

RELIEF VALVE CROSBY VALVE & N56904-00-0036 NIA 2PSV8708B 1977 INSTALLED YES GAGE CO.

RELIEF VALVE CROSBY VAL VE & N56904-00-0017 NIA 2PSV8708B 1975 REMOVED YES GAGE Co.

7. Description of Work Reliel valve serial nO.N56904-00-0017 was replaced by relief valve serial no N56904-00-0036 as part 01 a mandatory scope expansion. The replacement relief valve is a rotating spare
8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating PressurelKJ Exempt 0 Other 0 Pressure NOP psi Test Temp. NOT OF
9. Remarks _ _______________~__________~______~__~______________~________________________

_S~e~e~lt~em----'7 Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Syrnb NIA

-...,t--=-_______N.:...::.:.VA~___________ Expiration Date NIA Si Superintendent Date 6/~'2(&?§ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boiler Inspection and Insurance Co. of Connecticut of HartfXnnecticut have inspected the components described in this ?wner's Report during the period I?3(Zl//3 to c4LZr3> ,and state that to the best of my knowledge and behef. the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied , concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~

/ " /l C:~ '? r /

Commissions ___..loL_<:<l-f'-1T'__..J/L....<.:j~u~-=-__,..-_______--:-_____________

Inspector's Signature National Board, State, Province and Endorsements Date .

00/2&/2.0/3

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ---'1.=.3.:,;08;.,:0'--_ _ __

1. Owner Southern Nuclear Operating Company Date June 17,2013 Name 40 Invemess Center Parkway, Birmingham, AL Sheet of Address
2. Plant Vogt/e Electric Generating Plant Unit 2 Name Waynesboro, GA 30830 SNC475946 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NIA Plant VogUe Expiration Date NIA Address
4. Identification of System 1301 I Main Steam System
5. (a) Applicable Construction Code ASME Sec. 1/1 Edition, 1974 Addenda, Winter 1975 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ .....2..,OO'-'<-!1,..,e.,d"'.-=2"'O""O"'3"'a""d""d.:.-._ __

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE FISHER CONTROL 9390783 NIA 2HV13005C NlA CORRECTED YES Co.

7. Description of Work Replace components on valve.
8. Test Conducted; Hydrostatic 0 PneumaticD Nominal Operating pressureD Exempt[R]

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ *F

9. Remarks ______________~_~~__~____~~__~______________~_______________________

_S==ee~/t.=.em~7 Applicable Manufacturer's Data Reports to be aHached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certifi ____________----'-__________ Expiration Date NIA Superintendent Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Boller Inspection and Insvrance Co. of Connecticut of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 3/'Z.7/j;'

to W 14 / (~ . and state that to the best of my knowledge and belief, the Owner has performed exami nations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions ___-'"h,..:4t'-1-l-*__S....L:.:::5~~::....-----:---~:----c,--------

National Board, State, Province and Endorsements

ORIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # ..--'1.,;.3,;..08::..1'--_ _ __

1. Owner Southern Nuclear Operating Company Date May 7.2013 Name 40 Inverness Center Parkway. 8irmingham, AL Sheet of Address
2. Plant VogUe Electric Generating Plant Unit 2 Name Waynesboro. GA 30830 SNC377580 Address Repair/Replacement Organization P.O. No., Job No., etc.
3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NIA Name Authorization No. NlA Plant VogtJe Exp[ratlon Date NlA Address
4. Identification of System 1201/ Reactor Coolant System
5. (a) Applicable Construction Code ASME Sec. 11/ Edition, 1971 Addenda, Summer 1972 (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ ...2",O~01~ed~.,-"2""O,,,,03~ad~d~.,--__

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STEAM WESTINGHOUSE 120-G8G T*1984 NlA 2-1201-86*001 1984 CORRECTED YES GENERATOR

7. Description of Work Rep/ece hot leg (HL) primary manway studs #7 & #8 on Steam Generator #1
8. Test Conducted: Hydrostatic D Pneumatic D Nominal Operating PressureD Exempt~

Other 0 Pressure _ _ _- - psi Test Temp. _ _ _ _ _ _ oF

9. Remarks -s.;..e~e~/le::..m~7------------~A-P-p~li-ca~b~l~e~M~a-n-m~a-ct~u-r-er~s~D~-a~ta~R~e-po~rts~t-o~be-a~tta~c~h-e~d~---------------------

CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

--I,;::..-_ _ _ _.;.;NI.:..;:A-'-_ _ _ _ _ _ Expiration Date NlA Signed H-~~..=J..t~~~=::-:~--=-:-:__=.::.:~::.:.in~te:.:.;:nd:.:.en:..:.:..-t Date 3- 9i2 /;( 0/,,3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford $learn Boiler Inspection and Insurance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 03/"Zz!r "3 to 05/30/{ "2 " , and state that to the best of my knowledge and belief, the Owner has perfonned examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

~ ~-" Commissions ----,:-:-::G~-;><!:.A~3_'_'='*3,...:;'&:c_'_:___=-:__-_:_=__:_--.,__--

~ Inspector's Signature National Board, State, Province and Endorsements Date 30?-1.hIj7-Di3