ML18016A605

Proposed Tech Specs 3.0.4 Concerning Applicability of Limiting Conditions for Operation & SR to Be Consistent with GL 87-09

ML18016A605
Person / Time
Site:	Harris
Issue date:	10/01/1998
From:	CAROLINA POWER & LIGHT CO.
To:
Shared Package
ML18016A604	List: ML18016A603 ML18016A605
References
GL-87-09, GL-87-9, NUDOCS 9810070339
Download: ML18016A605 (6)

Text

3/4. 0 APPLICABILITY

~

L IAITING CONDITION FOR OPERATION 3.0.1 Cc;.'pliance with the Limiting Condition." for Operation ccntained in the succeeding specifications is required during the OPERATIONAL NODES or other conditions specified therein: except that upon fai lure to meet the Limiting Conditions for Operation. the associated ACTION requirements shall be met.

3.0.2 Noncompliance with a specification shall exist when the requirements of the Limiting Condition for Operation and associated ACTION requirements are not met within the specified time intervals. If the Limiting Condition for Operation is restored prior to expiration of the specified time intervals.

completion of the ACTION requirements is not required unless otherwise noted in the ACTION statement.

3.0.3 When a Limiting Condition for Operation is not met except as provided~

in the associated ACTION requirements. within I hour action shall be initiated placing i's to place the unit in a NODE in which the specification does not apply by applicable, in:

a ~ At least HOT STANDBY within th next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />,

b. At least HOT SHUTDOWN within the following 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />. and

c. At least COLD SHUTDOWN within the subsequent 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.

Where corrective measures are completed that permit operation under the ACTION requirements. the action may be taken in accordance with the specified time limits as measured from the time of failure to meet the Limiting Condition for Operation. Exceptions to these requirements are stated in the individual specifications.

This specification is not applicable in NODE 5 or 6.

~hc-v hat 3.0.4 Entry /into an OPERATIONAL NODE or other specified condition shall nowt be made~R4~ the conditions for the Limiting Condition for Operation are~met p e-ACT-IGN-aequi&.-emeht-s. Thi s provision shall not prevent passage through or to OPERAT a required to comply with ACTION requirements Exce on to these requirem ts are stated in the individual specification . oc +h S4vQ.~u~

f ~

g,r~ pa W + o.

o< mh 3.0.5 Equipment removed from service or declar inoperable to comply wi ACTIONS may be returned to service under adminis at ve rol perform testing required to demonstrate its OPERAB IT or the PERABILITY of other equipment. This is an exception to 3.0. 1 above for the system returned to service under administrative control to perform the testing required to demonstrate OPERABILITY.

a~* @4~ assoc',a~ 4 <' e~q~'>m a, s[V~~'< +4~g ~ ~h+

~ <ft'.w6eh + we. ln4u v~l, E~)Ni )gQ ~~ g)NA'TlomHL. gi04C D> +QC <'L @cd C.o~cVag)o~ ~~ Qc ~J ~ ( ~(,

p,Cg ('oM ceq~iwv ch'< ~4eA co~+>~c.c +c 'L<w g~w i $4 con'5 nugae gp~Qo~ Qf- ~~ +c 11+ Pg)g ~ Vnll~gggg 9Si0070339 'Mi00i PDR ADQCK 0500040Q, P PDR SHEARON HARRIS - UNIT I 3/4 O-l Amendment No. 69

I

~

+34. 0 APPLICABILITY LIMITING CONDITION t

FOR OPERATION 3.0. 1 Compliance with the Limiting Conditions for Operation contained in the succeeding specifications is required during the OPERATIONAL. MODES or other conditions specified therein; except that upon failure to meet the Limiting Conditions for Operation, the associated ACTION requirements shall be met.

3.0.2 Noncompliance with a specification shall exist when the requirements of the Limiting Condition for Operation and associated ACTION requirements are not met within the specified time intervals. If the Limiting Condition for Operation is restored prior to expiration of the specified time intervals, completion of the ACTION requirements is not required unless otherwise noted in the ACTION statement.

3.0.3 When a Limiting Condition for Operation is not met, except as provided in the associated ACTION requirements, within 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> action shall be initiated to place the unit in a MODE in which the specification does not apply by placing it, as applicable, in:

a. At least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />,

b. At least HOT SHUTDOWN within the following 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and

c. At least COLD SHUTDOWN within the subsequent 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.

Where corrective measures are completed that permit operation under the ACTION requirements, the action may be taken in accordance with the specified time limits as measured from the time of failure to meet the Limiting Condition for Operation. Exceptions to these requirements are stated in the individual specifications.

This specification is not applicable in MODE 5 or 6.

3.0.4 Entry into an OPERATIONAL MODE or other specified condition shall not be made when the conditions for the Limiting .Conditions for Operation are not met and the associated ACTION requires a shutdown if they are not met within a specified time interval. Entry into an OPERATIONAL MODE or specified condition may be made in accordance with ACTION requirements when conformance to them permits continued operation of the facility for an unlimited period of time. This provision shall not prevent passage through or to OPERATIONAL MODES as required to comply with ACTION requirements or that are part of a shutdown of the unit. Exceptions to these requirements are stated in the individual specifications.

3.0.5 Equipment removed from service or declared inoperable to comply with ACTIONS may be returned to service under administrative control solely to perform testing required to demonstrate its OPERABILITY or the OPERABILITY of other equipment. This is an exception to 3.0. 1 above for the system returned to service under administrative control to perform the testing required to demonstrate OPERABILITY.

SHEARON HARRIS - UNIT 1 3/4 0-1 Amendment No.

C I

I lit N 4 4

n V

RFFUELING OPERATIONS C

3 4.9.9 CONTAINMENT VENTILATION ISOLATION SYSTEM LIMITING CONDITION FOR OPERATION 3.9.9 The Containment Ventilation Isolation System shall be OPERABLE APPLICABILITY: During CORE ALTERATIONS or movement of irradiated fuel within the containment.

ACTION:

With the Containment Ventilation Isolation System inoperable, close each of the containment purge makeup and exhaust penetrations providing direct access from the containment atmosphere to the outside atmosphere.

b. The provisions of Specification 3.0.3 are not applicable.

SURVEILLANCE REQUIREMENTS 4.9.9 The Containment Ventilation Isolation System shall be demonstrated OPERABLE within 100 hours0.00116 days <br />0.0278 hours <br />1.653439e-4 weeks <br />3.805e-5 months <br /> prior to the start of and at least once per 7 days during CORE ALTERATIONS by verifying that containment ventilation isolation occurs on a two-out-of-four High Radiation test signal from the containment area radiation monitors (Table 3.3-6, item I.a) and by verifying that isolation occurs for each valve using its control switch in the main control room.

SHEARON HARRIS - UNIT I 3/4 9-11 Amendment No.

0 i>

L F