ML18101A917: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(4 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
| issue date = 08/18/1995 | | issue date = 08/18/1995 | ||
| title = LER 95-016-00:on 950720,identified Disparity in Containment Parameters & Accident Analysis.Issued Ltr to All Nuclear Engineering That Identified Temp Transient Associated W/Slba | | title = LER 95-016-00:on 950720,identified Disparity in Containment Parameters & Accident Analysis.Issued Ltr to All Nuclear Engineering That Identified Temp Transient Associated W/Slba | ||
| author name = | | author name = Rosenfeld E | ||
| author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | | author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | ||
| addressee name = | | addressee name = | ||
Line 17: | Line 17: | ||
=Text= | =Text= | ||
{{#Wiki_filter:NRC FORM366 U.S. NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95) EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS. | {{#Wiki_filter:NRC FORM366 U.S. NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95) EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS. | ||
FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION AND RECORDS MANAGEMENT BRANCH (T-6 F33J U.S. NUCLEAR (See reverse for required number of REGULATORY COMMISSIONT WASHINGTON, DC 20 S5-0001F AND TO THE PAPERWORK REDUC ION PROJECT b3150-0104), 0 FICE OF digits/characters for each block) MANAGEMENT AND BUDGET, WASHINGTON, C 20503. FACILITY NAME (1) DOCKET NUMBER (2) PAGE(3) SALEM, UNIT 1 05000272 1 OF6 TITLE(4) DIFFERENCE BETWEEN CONTAINMENT DESIGN PARAMETERS AND ACCIDENT ANALYSIS EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8) | REPORTED LESSONS LEARNED ARE INCORPORATED INTO THE LICENSEE EVENT REPORT (LER) LICENSING PROCESS AND FED BACK TO INDUSTRY. FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION AND RECORDS MANAGEMENT BRANCH (T-6 F33J U.S. NUCLEAR (See reverse for required number of REGULATORY COMMISSIONT WASHINGTON, DC 20 S5-0001F AND TO THE PAPERWORK REDUC ION PROJECT b3150-0104), 0 FICE OF digits/characters for each block) MANAGEMENT AND BUDGET, WASHINGTON, C 20503. | ||
FACILITY NAME (1) DOCKET NUMBER (2) PAGE(3) | |||
SALEM, UNIT 1 05000272 1 OF6 TITLE(4) | |||
POWER 20.2203(a)(1) 20.2203(a)(3)(i) x 50. 73(a)(2)(ii) | DIFFERENCE BETWEEN CONTAINMENT DESIGN PARAMETERS AND ACCIDENT ANALYSIS EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8) | ||
MONTH DAY YEAR YEAR I SEQUENTIAL NUMBER IREVISION NUMBER MONTH DAY YEAR FACILITY NAME SALEM, UNIT 2 DOCKET NUMBER 05000311 DOCKET NUMBER 07 20 95 95 - 016 - 0 08 18 95 FACILITY NAME 05000 OPERATING THIS REPORT IS SUBMITTED PURSUANT TO THE REQUIREMENTS OF 10 CFR §: (Check one or more) (11) | |||
LEVEL (10) 000 20.2203(a)(2)(i) 20.2203(a)(3)(ii) | MODE(9) 5 20.2201(b) 20.2203(a)(2)(v) 50. 73(a)(2)(i) 50. 73(a)(2)(viii) | ||
POWER 20.2203(a)(1) 20.2203(a)(3)(i) x 50. 73(a)(2)(ii) 50. 73(a)(2)(x) | |||
LEVEL (10) 000 20.2203(a)(2)(i) 20.2203(a)(3)(ii) 50. 73(a)(2)(iii) 73.71 20.2203(a)(2)(ii) 20.2203(a)(4) 50. 73(a)(2)(iv) OTHER 20.2203(a)(2)(iii) 50.36(c)(1) 50. 73(a)(2)(v) Spec~in Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) 50. 73(a)(2)(vii) | |||
OTHER 20.2203(a)(2)(iii) 50.36(c)(1) | LICENSEE CONTACT FOR THIS LER (12) | ||
NAME TELEPHONE NUMBER (Include Area Code) | |||
Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) | E.ROSENFELD,MANAGER-NUCLEARFUELS (609) 339-1210 COMPLETE ONE LINE FOR EACH COMPONENT FAILURE DESCRIBED IN THIS REPORT (13) | ||
'""~'-''*"" REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE TONPRDS ::';;;::.¥{'.~; CAUSE SYSTEM COMPONENT MANUFACTURER TONPRDS X IYES SUPPLEMENTAL REPORT EXPECTED (14) | |||
LICENSEE CONTACT FOR THIS LER (12) NAME TELEPHONE NUMBER (Include Area Code) | (If yes, complete EXPECTED SUBMISSION DATE). | ||
REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER TONPRDS | I INO EXPECTED SUBMISSION DATE (15) | ||
Technical Specifications Section 5:2.2 describes the containment as being designed for a maximum pressure of 47 psig and an air temperature of 271 degrees Fahrenheit (F). The Steam Line Break Accident (SLBA) produces peak temperatures of 348 degrees F. The Design Basis Loss of Coolant Accident (DBLOCA) produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The UFSAR describes the containment as being designed for a maximum pressure of 4 7 psig and a liner temperature of 246 degrees F. A four hour report was made in accordance with 10 CFR 50. 72.b.2.i. | MONTH 12 DAY 15 YEAR 95 ABSTRACT (Limit to 1400 spaces, i.e., approximately 15 single-spaced typewritten lines) (16) | ||
due to the lack of documentation that evaluates and accepts these apparent discrepancies. | On July 20, 1995, a disparity was identified between: the containment structure design basis as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis; and existing design basis for the containment structure. Technical Specifications Section 5:2.2 describes the containment as being designed for a maximum pressure of 47 psig and an air temperature of 271 degrees Fahrenheit (F). The Steam Line Break Accident (SLBA) produces peak temperatures of 348 degrees F. The Design Basis Loss of Coolant Accident (DBLOCA) produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The UFSAR describes the containment as being designed for a maximum pressure of 4 7 psig and a liner temperature of 246 degrees F. A four hour report was made in accordance with 10 CFR 50. 72.b.2.i. due to the lack of documentation that evaluates and accepts these apparent discrepancies. Preliminary analysis shows that the containment would continue to fulfill its safety function following a SLBA or DBLOCA. However, the SLBA temperature transient results in loads on portions of the containment which marginally exceed the design allowable loads. The effects of the DBLOCA may result in loads which reduce the design margin assumed in the original design basis. This is reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition outside the design basis of the plant. Investigation continues into the effects and cause and will be included in a supplemental LER. This issue will be resolved prior to transition of the plant from Mode 5 to Mode 4. | ||
Preliminary analysis shows that the containment would continue to fulfill its safety function following a SLBA or DBLOCA. However, the SLBA temperature transient results in loads on portions of the containment which marginally exceed the design allowable loads. The effects of the DBLOCA may result in loads which reduce the design margin assumed in the original design basis. This is reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition outside the design basis of the plant. Investigation continues into the effects and cause and will be included in a supplemental LER. This issue will be resolved prior to transition of the plant from Mode 5 to Mode 4. ... ? | ... ? | ||
-Pressurized Water Reactor | 9..J08-800- ?8 950818 NRC FORM 366 (4-95) PDR ADOCK 05000272 | ||
and the existing design calculations for the containment structure. | ~ D~D | ||
The effects of the SLBA transient result in loads on specific portions of the containment structure which marginally exceed the allowable loads described in the UFSAR. The effects of the DBLOCA may result in loads which reduce the design margin * .* : assumed in the initial design approval. | |||
This issue is considered reportable in accordance with | NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95) | ||
Mode: 5 Reactor Power: % Unit Load: MWe Description of Occurrence On July 20, 1995, during a review of the containment liner design basis documents, a disparity was identified between: the design basis for the containment structure as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis for a Steam Line Break Accident (SLBA) and Design Basis Loss of Coolant Accident (DBLOCA); | LICENSEE EVENT REPORT (LER) | ||
and the existing design calculations for the containment structure. | TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) | ||
Technical Specifications Section 5.2.2 describes the containment structure as being designed for a maximum pressure of 4 7 psig and an air temperature of 271 degrees Fahrenheit (F). The transient following a SLBA produces temperatures in containment which exceed 271 degrees F for approximately 160 seconds and peak at 348 degrees F. The transient following a DBLOCA produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The Updated Final Safety Analysis (UFSAR) describes the containment as being designed to withstand a maximum pressure of 47 psig and an air temperature of 246 degrees F. Due to the lack of documentation that evaluates and accepts these apparent discrepancies, a four hour report was made in accordance with 10 CFR 50. 72.b.2.i.. | SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 2 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17) | ||
After further review it has been determined that the temperature and pressure effects associated with the SLBA are bounded by the temperature and pressure effects which governed the original design of the containment. | Plant and System Identification Westinghouse - Pressurized Water Reactor Energy Industry Identification System (EllS) codes and component function identifier codes appear in the text as {XX/XX}. | ||
The effects of the DBLOCA may result in NRC FORM 366A (4-95) | Identification of Occurrence A disparity was identified between; the containment design basis as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis for a Steam Line Break Accident (SLBA) and Design Basis Loss of Coolant Accident (DBLOCA); and the existing design calculations for the containment structure. The effects of the SLBA transient result in loads on specific portions of the containment structure which marginally exceed the allowable loads described in the UFSAR. The effects of the DBLOCA may result in loads which reduce the design margin * .* : | ||
NRC FORM 366A | assumed in the initial design approval. This issue is considered reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition that is outside the design basis of the plant. | ||
Event Date: July 20, 1995 Report Date: August 18, 1995 This report was initiated by Incident Report No. 95-1176 Conditions Prior to Occurrence Both Units were in a self-imposed extended shutdown. | |||
Evaluations conclude that the minor deformation (conservatively estimated to be 0. 1 52 inches) which might occur would not prevent the containment structure or the Containment Spray system from performing their safety function. | Mode: 5 Reactor Power: % Unit Load: MWe Description of Occurrence On July 20, 1995, during a review of the containment liner design basis documents, a disparity was identified between: the design basis for the containment structure as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis for a Steam Line Break Accident (SLBA) and Design Basis Loss of Coolant Accident (DBLOCA); and the existing design calculations for the containment structure. Technical Specifications Section 5.2.2 describes the containment structure as being designed for a maximum pressure of 4 7 psig and an air temperature of 271 degrees Fahrenheit (F). The transient following a SLBA produces temperatures in containment which exceed 271 degrees F for approximately 160 seconds and peak at 348 degrees F. | ||
A review of the original design basis calculations for the containment liner indicates that the DBLOCA conditions may infringe upon the design margin calculated for in the original design case. The original design demonstrated a 1.5 design margin for the load conditions associated with a liner temperature of 246 degrees F and a containment pressure of 47 psig. Review of these calculations supports an assessment that containment integrity would be maintained at the Technical Specification design values of 47 psig. with an air temperature of 271 degrees F. (also considered limits for the DBLOCA), however, the 1.5 design margin may not be maintained. | The transient following a DBLOCA produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The Updated Final Safety Analysis (UFSAR) describes the containment as being designed to withstand a maximum pressure of 47 psig and an air temperature of 246 degrees F. Due to the lack of documentation that evaluates and accepts these apparent discrepancies, a four hour report was made in accordance with 10 CFR 50. 72.b.2.i.. After further review it has been determined that the temperature and pressure effects associated with the SLBA are bounded by the temperature and pressure effects which governed the original design of the containment. The effects of the DBLOCA may result in NRC FORM 366A (4-95) | ||
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95) | |||
LICENSEE EVENT REPORT (LER) | |||
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE(3) | |||
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 3 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17) | |||
Description of Occurrence (Continued) loads which reduce the design margin calculated for the original design case. Preliminary analysis, as discussed below, has shown that the containment would continue to fulfill its safety function following a SLBA and a DBLOCA. | |||
This issue is reportable under 10 CFR 50. 73 because the effects of the SLBA and DBLOCA transients may result in loads on portions of the containment structure which exceed the described design basis in the UFSAR. | |||
Specifically, an evaluation of the Salem Unit 1 Containment Spray supports, (calculation 6S 1-1710-001 and engineering judgment), revealed that limited areas of the containment liner would marginally exceed yield stress following a SLBA. This would occur at the liner locations where the Containment Spray support steel penetrates the liner and attaches to embedments in the containment structure. Evaluations conclude that the minor deformation (conservatively estimated to be 0. 1 52 inches) which might occur would not prevent the containment structure or the Containment Spray system from performing their safety function. | |||
A review of the original design basis calculations for the containment liner indicates that the DBLOCA conditions may infringe upon the design margin calculated for in the original design case. The original design demonstrated a 1.5 design margin for the load conditions associated with a liner temperature of 246 degrees F and a containment pressure of 47 psig. Review of these calculations supports an assessment that containment integrity would be maintained at the Technical Specification design values of 47 psig. with an air temperature of 271 degrees F. (also considered upp~r limits for the DBLOCA), | |||
however, the 1.5 design margin may not be maintained. | |||
Analysis of Occurrence Updated Final Safety Analysis Report (UFSAR) Section 3.1.2 states that PSE&G conforms to the intent of the AEC's General Design Criteria for Nuclear Power Plants dated July 7, 1971, with minor exceptions. | Analysis of Occurrence Updated Final Safety Analysis Report (UFSAR) Section 3.1.2 states that PSE&G conforms to the intent of the AEC's General Design Criteria for Nuclear Power Plants dated July 7, 1971, with minor exceptions. | ||
Criteria 10 of this document states that the containment shall be designed to sustain the initial effects of gross equipment failures, such as a large coolant boundary break, without loss of integrity. | Criteria 10 of this document states that the containment shall be designed to sustain the initial effects of gross equipment failures, such as a large coolant boundary break, without loss of integrity. The containment must be able to maintain its functional capability under any accident condition. | ||
The containment must be able to maintain its functional capability under any accident condition. | |||
UFSAR, Section 6.2.1.1 provides the containment functional description and design basis. It describes that the containment completely encloses the reactor coolant system and ensures that post-accident leakage is limited. The containment structure also provides biological shielding for normal and accident conditions. | UFSAR, Section 6.2.1.1 provides the containment functional description and design basis. It describes that the containment completely encloses the reactor coolant system and ensures that post-accident leakage is limited. The containment structure also provides biological shielding for normal and accident conditions. | ||
UFSAR Section 3.8.3 provides the structural design basis requirements for the containment structure. | UFSAR Section 3.8.3 provides the structural design basis requirements for the containment structure. | ||
This section addresses containment response to various load combinations including Design Basis Loss Of Coolant Accident (DBLOCA) pressures and temperatures. | This section addresses containment response to various load combinations including Design Basis Loss Of Coolant Accident (DBLOCA) pressures and temperatures. These analyses indicate peak loading at a pressure of 4 7 psig and a liner temperature of 246 degrees F. | ||
These analyses indicate peak loading at a pressure of 4 7 psig and a liner temperature of 246 degrees F. NRC FORM 366A (4-95) | NRC FORM 366A (4-95) | ||
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95) | |||
Detailed structural analysis is continuing. | LICENSEE EVENT REPORT (LER) | ||
The final results will be provided in the supplement to this LER. SLBA Impact on Containment Spray Piping Supports -The containment spray piping supports are attached directly to the containment structure through the containment liner. Initial evaluations of the Salem Unit 1 Containment Spray supports, (calculation 6S 1-1710-001), revealed that the containment liner at the support steel embedments into the containment structure marginally exceeds yield stress during the short duration SLBA temperature transient. | TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) | ||
However, evaluations conclude that the deformation which might occur would not prevent the containment structure or the Containment Spray system from performing its safety function. | SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 4 OF 6 95 - 016 - 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17) | ||
*Detailed analysis is continuing and the final results will be provided in the supplement to this LER. SLBA Impact on the Equipment Qualification (EQ) Program -The peak SLBA temperatures as described in UFSAR Chapter 15 Accident Analysis have been considered as part of the EQ program analysis. | Analysis of Occurrence (Continued) | ||
SLBA Impact on Containment and Liner - The SLBA analysis predicts a peak containment temperature value of 348 degrees F. Although the SLBA peak temperature is higher than that resulting from the Design Basis LOCA, the corresponding pressure for the SLBA is only 35 psig compared to a pressure of 4 7 psig for the Design Basis LOCA. Initial preliminary structural analysis shows that the Design Basis LOCA combination of pressure and temperature result in more severe loading for the containment and liner and therefore, bounds the temperature and pressure scenario associated with a main steam line break accident. Detailed structural analysis is continuing. The final results will be provided in the supplement to this LER. | |||
SLBA Impact on Containment Spray Piping Supports - The containment spray piping supports are attached directly to the containment structure through the containment liner. Initial evaluations of the Salem Unit 1 Containment Spray supports, (calculation 6S 1-1710-001), revealed that the containment liner at the support steel embedments into the containment structure marginally exceeds yield stress during the short duration SLBA temperature transient. However, evaluations conclude that the deformation which might occur would not prevent the containment structure or the Containment Spray system from performing its safety function. *Detailed analysis is continuing and the final results will be provided in the supplement to this LER. | |||
SLBA Impact on the Equipment Qualification (EQ) Program -The peak SLBA temperatures as described in UFSAR Chapter 15 Accident Analysis have been considered as part of the EQ program analysis. | |||
Therefore, the effects of the elevated SLBA temperatures on the equipment analyzed under the EQ program have been evaluated to be acceptable. | Therefore, the effects of the elevated SLBA temperatures on the equipment analyzed under the EQ program have been evaluated to be acceptable. | ||
SLBA Impact on Containment Hatches -The containment equipment hatch and personnel hatch have seals made of silicone rubber gaskets which are rated for service up to 300 degrees F. Initial assessments (based on Hope Creek EQ Report (MEQ-1), Salem Environmental Design Criteria SDC-1419 and engineering judgment) of these seals for temperatures up to 350 degrees F conclude that the seals will continue to perform their safety function. | SLBA Impact on Containment Hatches - The containment equipment hatch and personnel hatch have seals made of silicone rubber gaskets which are rated for service up to 300 degrees F. Initial assessments (based on Hope Creek EQ Report (MEQ-1), Salem Environmental Design Criteria (S-C-ZZ-SDC-1419 and engineering judgment) of these seals for temperatures up to 350 degrees F conclude that the seals will continue to perform their safety function. Detailed evaluation and qualification of the seals for the SLBA elevated temperatures is ongoing and will be documented in the supplement to this LER. | ||
Detailed evaluation and qualification of the seals for the SLBA elevated temperatures is ongoing and will be documented in the supplement to this LER. SLBA Impact on Floor Framing/Miscellaneous Steel -Initial reviews of floor framing at elevation 100 ft. and elevation 130 ft. and miscellaneous steel below elevation 100 ft. indicate that sufficient attention to detail was provided in the original design to allow for further thermal growth with minimal impact. Slotted holes and pinned connections were used extensively. | SLBA Impact on Floor Framing/Miscellaneous Steel - Initial reviews of floor framing at elevation 100 ft. | ||
Further investigation into the temperature effects on these component is continuing and the final results will be provided in the supplement to this LER. SLBA Impact on Other Steel Structures | and elevation 130 ft. and miscellaneous steel below elevation 100 ft. indicate that sufficient attention to detail was provided in the original design to allow for further thermal growth with minimal impact. | ||
-Other internal steel structures which consist of miscellaneous access platforms and supports for major equipment have been initially reviewed. | Slotted holes and pinned connections were used extensively. Further investigation into the temperature effects on these component is continuing and the final results will be provided in the supplement to this LER. | ||
The design of these components indicates that most have sufficient built-in flexibility to preclude significant effects from thermal loads. However, several of these structures appear to be highly constrained, and thermal loads could create significant stresses. | SLBA Impact on Other Steel Structures - Other internal steel structures which consist of miscellaneous access platforms and supports for major equipment have been initially reviewed. The design of these components indicates that most have sufficient built-in flexibility to preclude significant effects from thermal loads. However, several of these structures appear to be highly constrained, and thermal loads could create significant stresses. These structures are currently being evaluated and the final results will be provided in the supplement to this LER. | ||
These structures are currently being evaluated and the final results will be provided in the supplement to this LER. NRC FORM 366A (4-95) | NRC FORM 366A (4-95) | ||
NRC FORM 366A | |||
<Continued) | NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95) | ||
LICENSEE EVENT REPORT (LER) | |||
Further review of design documentation is required to determine the extent to which the 1.5 design factor may be impacted by the 271 degrees F containment air temperature. | TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3) | ||
Apparent Cause of Occurrence The apparent cause of this occurrence is still underway and will be provided in the supplement to this LER. Causal factors may include a programmatic breakdown in configuration control. Prior Similar Occurrence Investigation into other prior similar occurrences will be conducted as part of the root cause determination and will be reported in the supplement to this LER. Safety Significance This issue is considered reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition that is outside the design basis of the plant. While the plants continue operating at or below mode 5, there are no industrial safety or nuclear safety issues associated with this issue. The temperature and pressure effects associated with a SLBA or a DBLOCA would not be possible while the plant is maintained shutdown with Reactor Coolant temperatures at or below 200 degrees F. The analysis completed at this time indicates that the containment temperatures and pressures predicted following a SLBA or DBLOCA would not have rendered the containment structure incapable of performing its intended safety function. | SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 5 OF 6 95 - 016 - 0 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) | ||
However, final analysis is continuing and the plants will not transition from mode 5 to mode 4 until this issue is resolved. | Analysis of Occurrence <Continued) | ||
Corrective Actions Corrective actions, as necessary, will be developed after completion of a root cause determination and analysis into the impact of this issue on plant equipment and design bases. A letter has been issued to all of Nuclear Engineering identifying the temperature transient associated with the SLBA. All groups were requested to identify and analyze any components not previously evaluated for the effects of the elevated temperatures associated with the SLBA. NRC FORM 366A (4-95) | LOCA Analysis- UFSAR Section 3.8 documents the acceptability of the Containment design. The containment design calculations demonstrated the containment would not exceed design allowables with a containment pressure of 47 psig and a liner temperature of 246 degrees F. The calculations go on to demonstrate that a 1.5 times design margin is built into the design. This is done by demonstrating that the containment would not exceed design allowables with a containment pressure of 70.5 psig (1.5 times 47 psig.) with a corresponding saturation temperature of 306 degrees F. Therefore, containment integrity would be maintained at the Technical Specification design values of 47 psig. with an air temperature of 271 degrees F. | ||
FORM 366A | Initial review of the design documentation indicates that the original design assumed a differential temperature between the air temperature of 271 degrees F and the 246 degrees F temperature of the liner. In the absence of any substantial documentation justifying this temperature difference, it is assumed that the containment liner will most likely reach temperatures very close to the peak accident temperature (containment structure heat transfer models support this determination). Further review of design documentation is required to determine the extent to which the 1.5 design factor may be impacted by the 271 degrees F containment air temperature. | ||
The results of these and other analyses is continuing, and the plants will not transition from mode 5 to mode 4 until this issue is resolved. | Apparent Cause of Occurrence The apparent cause of this occurrence is still underway and will be provided in the supplement to this LER. Causal factors may include a programmatic breakdown in configuration control. | ||
Additional corrective actions identified will be reported in the supplement to this LER. NRC FORM 366A (4-95)}} | Prior Similar Occurrence Investigation into other prior similar occurrences will be conducted as part of the root cause determination and will be reported in the supplement to this LER. | ||
Safety Significance This issue is considered reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition that is outside the design basis of the plant. While the plants continue operating at or below mode 5, there are no industrial safety or nuclear safety issues associated with this issue. The temperature and pressure effects associated with a SLBA or a DBLOCA would not be possible while the plant is maintained shutdown with Reactor Coolant temperatures at or below 200 degrees F. The analysis completed at this time indicates that the containment temperatures and pressures predicted following a SLBA or DBLOCA would not have rendered the containment structure incapable of performing its intended safety function. However, final analysis is continuing and the plants will not transition from mode 5 to mode 4 until this issue is resolved. | |||
Corrective Actions Corrective actions, as necessary, will be developed after completion of a root cause determination and analysis into the impact of this issue on plant equipment and design bases. | |||
A letter has been issued to all of Nuclear Engineering identifying the temperature transient associated with the SLBA. All groups were requested to identify and analyze any components not previously evaluated for the effects of the elevated temperatures associated with the SLBA. | |||
NRC FORM 366A (4-95) | |||
~RC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95) | |||
LICENSEE EVENT REPORT (LER) | |||
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE(3) | |||
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER I REVISION NUMBER 6 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Form 366A) (17) | |||
Corrective Actions (Continued) | |||
The results of these and other analyses is continuing, and the plants will not transition from mode 5 to mode 4 until this issue is resolved. Additional corrective actions identified will be reported in the supplement to this LER. | |||
NRC FORM 366A (4-95)}} |
Latest revision as of 05:40, 3 February 2020
ML18101A917 | |
Person / Time | |
---|---|
Site: | Salem ![]() |
Issue date: | 08/18/1995 |
From: | Rosenfeld E Public Service Enterprise Group |
To: | |
Shared Package | |
ML18101A914 | List: |
References | |
LER-95-016-01, LER-95-16-1, NUDOCS 9508280028 | |
Download: ML18101A917 (6) | |
Text
NRC FORM366 U.S. NUCLEAR REGULATORY COMMISSION APPROVED BY OMB NO. 3150-0104 (4-95) EXPIRES 04130/98 ESTIMATED BURDEN PER RESPONSE TO COMPLY WITH THIS MANDATORY INFORMATION COLLECTION REQUEST: 50.0 HRS.
REPORTED LESSONS LEARNED ARE INCORPORATED INTO THE LICENSEE EVENT REPORT (LER) LICENSING PROCESS AND FED BACK TO INDUSTRY. FORWARD COMMENTS REGARDING BURDEN ESTIMATE TO THE INFORMATION AND RECORDS MANAGEMENT BRANCH (T-6 F33J U.S. NUCLEAR (See reverse for required number of REGULATORY COMMISSIONT WASHINGTON, DC 20 S5-0001F AND TO THE PAPERWORK REDUC ION PROJECT b3150-0104), 0 FICE OF digits/characters for each block) MANAGEMENT AND BUDGET, WASHINGTON, C 20503.
FACILITY NAME (1) DOCKET NUMBER (2) PAGE(3)
SALEM, UNIT 1 05000272 1 OF6 TITLE(4)
DIFFERENCE BETWEEN CONTAINMENT DESIGN PARAMETERS AND ACCIDENT ANALYSIS EVENT DATE (5) LER NUMBER (6) REPORT DATE (7) OTHER FACILITIES INVOLVED (8)
MONTH DAY YEAR YEAR I SEQUENTIAL NUMBER IREVISION NUMBER MONTH DAY YEAR FACILITY NAME SALEM, UNIT 2 DOCKET NUMBER 05000311 DOCKET NUMBER 07 20 95 95 - 016 - 0 08 18 95 FACILITY NAME 05000 OPERATING THIS REPORT IS SUBMITTED PURSUANT TO THE REQUIREMENTS OF 10 CFR §: (Check one or more) (11)
MODE(9) 5 20.2201(b) 20.2203(a)(2)(v) 50. 73(a)(2)(i) 50. 73(a)(2)(viii)
POWER 20.2203(a)(1) 20.2203(a)(3)(i) x 50. 73(a)(2)(ii) 50. 73(a)(2)(x)
LEVEL (10) 000 20.2203(a)(2)(i) 20.2203(a)(3)(ii) 50. 73(a)(2)(iii) 73.71 20.2203(a)(2)(ii) 20.2203(a)(4) 50. 73(a)(2)(iv) OTHER 20.2203(a)(2)(iii) 50.36(c)(1) 50. 73(a)(2)(v) Spec~in Abstract below or in C Form 366A 20.2203(a)(2)(iv) 50.36(c)(2) 50. 73(a)(2)(vii)
LICENSEE CONTACT FOR THIS LER (12)
NAME TELEPHONE NUMBER (Include Area Code)
E.ROSENFELD,MANAGER-NUCLEARFUELS (609) 339-1210 COMPLETE ONE LINE FOR EACH COMPONENT FAILURE DESCRIBED IN THIS REPORT (13)
'""~'-*"" REPORTABLE CAUSE SYSTEM COMPONENT MANUFACTURER REPORTABLE TONPRDS ::';;;::.¥{'.~; CAUSE SYSTEM COMPONENT MANUFACTURER TONPRDS X IYES SUPPLEMENTAL REPORT EXPECTED (14)
(If yes, complete EXPECTED SUBMISSION DATE).
I INO EXPECTED SUBMISSION DATE (15)
MONTH 12 DAY 15 YEAR 95 ABSTRACT (Limit to 1400 spaces, i.e., approximately 15 single-spaced typewritten lines) (16)
On July 20, 1995, a disparity was identified between: the containment structure design basis as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis; and existing design basis for the containment structure. Technical Specifications Section 5:2.2 describes the containment as being designed for a maximum pressure of 47 psig and an air temperature of 271 degrees Fahrenheit (F). The Steam Line Break Accident (SLBA) produces peak temperatures of 348 degrees F. The Design Basis Loss of Coolant Accident (DBLOCA) produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The UFSAR describes the containment as being designed for a maximum pressure of 4 7 psig and a liner temperature of 246 degrees F. A four hour report was made in accordance with 10 CFR 50. 72.b.2.i. due to the lack of documentation that evaluates and accepts these apparent discrepancies. Preliminary analysis shows that the containment would continue to fulfill its safety function following a SLBA or DBLOCA. However, the SLBA temperature transient results in loads on portions of the containment which marginally exceed the design allowable loads. The effects of the DBLOCA may result in loads which reduce the design margin assumed in the original design basis. This is reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition outside the design basis of the plant. Investigation continues into the effects and cause and will be included in a supplemental LER. This issue will be resolved prior to transition of the plant from Mode 5 to Mode 4.
... ?
9..J08-800- ?8 950818 NRC FORM 366 (4-95) PDR ADOCK 05000272
~ D~D
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3)
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 2 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17)
Plant and System Identification Westinghouse - Pressurized Water Reactor Energy Industry Identification System (EllS) codes and component function identifier codes appear in the text as {XX/XX}.
Identification of Occurrence A disparity was identified between; the containment design basis as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis for a Steam Line Break Accident (SLBA) and Design Basis Loss of Coolant Accident (DBLOCA); and the existing design calculations for the containment structure. The effects of the SLBA transient result in loads on specific portions of the containment structure which marginally exceed the allowable loads described in the UFSAR. The effects of the DBLOCA may result in loads which reduce the design margin * .* :
assumed in the initial design approval. This issue is considered reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition that is outside the design basis of the plant.
Event Date: July 20, 1995 Report Date: August 18, 1995 This report was initiated by Incident Report No. 95-1176 Conditions Prior to Occurrence Both Units were in a self-imposed extended shutdown.
Mode: 5 Reactor Power: % Unit Load: MWe Description of Occurrence On July 20, 1995, during a review of the containment liner design basis documents, a disparity was identified between: the design basis for the containment structure as described in the Technical Specification; the Updated Final Safety Analysis Report (UFSAR) Chapter 15 accident analysis for a Steam Line Break Accident (SLBA) and Design Basis Loss of Coolant Accident (DBLOCA); and the existing design calculations for the containment structure. Technical Specifications Section 5.2.2 describes the containment structure as being designed for a maximum pressure of 4 7 psig and an air temperature of 271 degrees Fahrenheit (F). The transient following a SLBA produces temperatures in containment which exceed 271 degrees F for approximately 160 seconds and peak at 348 degrees F.
The transient following a DBLOCA produces temperatures approaching 271 degrees F and pressures approaching 47 psig. The Updated Final Safety Analysis (UFSAR) describes the containment as being designed to withstand a maximum pressure of 47 psig and an air temperature of 246 degrees F. Due to the lack of documentation that evaluates and accepts these apparent discrepancies, a four hour report was made in accordance with 10 CFR 50. 72.b.2.i.. After further review it has been determined that the temperature and pressure effects associated with the SLBA are bounded by the temperature and pressure effects which governed the original design of the containment. The effects of the DBLOCA may result in NRC FORM 366A (4-95)
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE(3)
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 3 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17)
Description of Occurrence (Continued) loads which reduce the design margin calculated for the original design case. Preliminary analysis, as discussed below, has shown that the containment would continue to fulfill its safety function following a SLBA and a DBLOCA.
This issue is reportable under 10 CFR 50. 73 because the effects of the SLBA and DBLOCA transients may result in loads on portions of the containment structure which exceed the described design basis in the UFSAR.
Specifically, an evaluation of the Salem Unit 1 Containment Spray supports, (calculation 6S 1-1710-001 and engineering judgment), revealed that limited areas of the containment liner would marginally exceed yield stress following a SLBA. This would occur at the liner locations where the Containment Spray support steel penetrates the liner and attaches to embedments in the containment structure. Evaluations conclude that the minor deformation (conservatively estimated to be 0. 1 52 inches) which might occur would not prevent the containment structure or the Containment Spray system from performing their safety function.
A review of the original design basis calculations for the containment liner indicates that the DBLOCA conditions may infringe upon the design margin calculated for in the original design case. The original design demonstrated a 1.5 design margin for the load conditions associated with a liner temperature of 246 degrees F and a containment pressure of 47 psig. Review of these calculations supports an assessment that containment integrity would be maintained at the Technical Specification design values of 47 psig. with an air temperature of 271 degrees F. (also considered upp~r limits for the DBLOCA),
however, the 1.5 design margin may not be maintained.
Analysis of Occurrence Updated Final Safety Analysis Report (UFSAR) Section 3.1.2 states that PSE&G conforms to the intent of the AEC's General Design Criteria for Nuclear Power Plants dated July 7, 1971, with minor exceptions.
Criteria 10 of this document states that the containment shall be designed to sustain the initial effects of gross equipment failures, such as a large coolant boundary break, without loss of integrity. The containment must be able to maintain its functional capability under any accident condition.
UFSAR, Section 6.2.1.1 provides the containment functional description and design basis. It describes that the containment completely encloses the reactor coolant system and ensures that post-accident leakage is limited. The containment structure also provides biological shielding for normal and accident conditions.
UFSAR Section 3.8.3 provides the structural design basis requirements for the containment structure.
This section addresses containment response to various load combinations including Design Basis Loss Of Coolant Accident (DBLOCA) pressures and temperatures. These analyses indicate peak loading at a pressure of 4 7 psig and a liner temperature of 246 degrees F.
NRC FORM 366A (4-95)
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3)
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 4 OF 6 95 - 016 - 0 TEXT (If more space is required, use additional copies of NRC Fonn 366A) (17)
Analysis of Occurrence (Continued)
SLBA Impact on Containment and Liner - The SLBA analysis predicts a peak containment temperature value of 348 degrees F. Although the SLBA peak temperature is higher than that resulting from the Design Basis LOCA, the corresponding pressure for the SLBA is only 35 psig compared to a pressure of 4 7 psig for the Design Basis LOCA. Initial preliminary structural analysis shows that the Design Basis LOCA combination of pressure and temperature result in more severe loading for the containment and liner and therefore, bounds the temperature and pressure scenario associated with a main steam line break accident. Detailed structural analysis is continuing. The final results will be provided in the supplement to this LER.
SLBA Impact on Containment Spray Piping Supports - The containment spray piping supports are attached directly to the containment structure through the containment liner. Initial evaluations of the Salem Unit 1 Containment Spray supports, (calculation 6S 1-1710-001), revealed that the containment liner at the support steel embedments into the containment structure marginally exceeds yield stress during the short duration SLBA temperature transient. However, evaluations conclude that the deformation which might occur would not prevent the containment structure or the Containment Spray system from performing its safety function. *Detailed analysis is continuing and the final results will be provided in the supplement to this LER.
SLBA Impact on the Equipment Qualification (EQ) Program -The peak SLBA temperatures as described in UFSAR Chapter 15 Accident Analysis have been considered as part of the EQ program analysis.
Therefore, the effects of the elevated SLBA temperatures on the equipment analyzed under the EQ program have been evaluated to be acceptable.
SLBA Impact on Containment Hatches - The containment equipment hatch and personnel hatch have seals made of silicone rubber gaskets which are rated for service up to 300 degrees F. Initial assessments (based on Hope Creek EQ Report (MEQ-1), Salem Environmental Design Criteria (S-C-ZZ-SDC-1419 and engineering judgment) of these seals for temperatures up to 350 degrees F conclude that the seals will continue to perform their safety function. Detailed evaluation and qualification of the seals for the SLBA elevated temperatures is ongoing and will be documented in the supplement to this LER.
SLBA Impact on Floor Framing/Miscellaneous Steel - Initial reviews of floor framing at elevation 100 ft.
and elevation 130 ft. and miscellaneous steel below elevation 100 ft. indicate that sufficient attention to detail was provided in the original design to allow for further thermal growth with minimal impact.
Slotted holes and pinned connections were used extensively. Further investigation into the temperature effects on these component is continuing and the final results will be provided in the supplement to this LER.
SLBA Impact on Other Steel Structures - Other internal steel structures which consist of miscellaneous access platforms and supports for major equipment have been initially reviewed. The design of these components indicates that most have sufficient built-in flexibility to preclude significant effects from thermal loads. However, several of these structures appear to be highly constrained, and thermal loads could create significant stresses. These structures are currently being evaluated and the final results will be provided in the supplement to this LER.
NRC FORM 366A (4-95)
NRC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE (3)
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER IREVISION NUMBER 5 OF 6 95 - 016 - 0 TEXT (If more space is required, use additional copies of NRC Form 366A) (17)
Analysis of Occurrence <Continued)
LOCA Analysis- UFSAR Section 3.8 documents the acceptability of the Containment design. The containment design calculations demonstrated the containment would not exceed design allowables with a containment pressure of 47 psig and a liner temperature of 246 degrees F. The calculations go on to demonstrate that a 1.5 times design margin is built into the design. This is done by demonstrating that the containment would not exceed design allowables with a containment pressure of 70.5 psig (1.5 times 47 psig.) with a corresponding saturation temperature of 306 degrees F. Therefore, containment integrity would be maintained at the Technical Specification design values of 47 psig. with an air temperature of 271 degrees F.
Initial review of the design documentation indicates that the original design assumed a differential temperature between the air temperature of 271 degrees F and the 246 degrees F temperature of the liner. In the absence of any substantial documentation justifying this temperature difference, it is assumed that the containment liner will most likely reach temperatures very close to the peak accident temperature (containment structure heat transfer models support this determination). Further review of design documentation is required to determine the extent to which the 1.5 design factor may be impacted by the 271 degrees F containment air temperature.
Apparent Cause of Occurrence The apparent cause of this occurrence is still underway and will be provided in the supplement to this LER. Causal factors may include a programmatic breakdown in configuration control.
Prior Similar Occurrence Investigation into other prior similar occurrences will be conducted as part of the root cause determination and will be reported in the supplement to this LER.
Safety Significance This issue is considered reportable in accordance with 10 CFR 50. 73.a.2.ii.B as a condition that is outside the design basis of the plant. While the plants continue operating at or below mode 5, there are no industrial safety or nuclear safety issues associated with this issue. The temperature and pressure effects associated with a SLBA or a DBLOCA would not be possible while the plant is maintained shutdown with Reactor Coolant temperatures at or below 200 degrees F. The analysis completed at this time indicates that the containment temperatures and pressures predicted following a SLBA or DBLOCA would not have rendered the containment structure incapable of performing its intended safety function. However, final analysis is continuing and the plants will not transition from mode 5 to mode 4 until this issue is resolved.
Corrective Actions Corrective actions, as necessary, will be developed after completion of a root cause determination and analysis into the impact of this issue on plant equipment and design bases.
A letter has been issued to all of Nuclear Engineering identifying the temperature transient associated with the SLBA. All groups were requested to identify and analyze any components not previously evaluated for the effects of the elevated temperatures associated with the SLBA.
NRC FORM 366A (4-95)
~RC FORM 366A U.S. NUCLEAR REGULATORY COMMISSION (4-95)
LICENSEE EVENT REPORT (LER)
TEXT CONTINUATION FACILITY NAME (1) DOCKET NUMBER (2) LER NUMBER (6) PAGE(3)
SALEM, UNIT 1 05000272 YEAR I SEQUENTIAL NUMBER I REVISION NUMBER 6 OF 6 95 - 016 0 TEXT (If more space is required, use additional copies of NRC Form 366A) (17)
Corrective Actions (Continued)
The results of these and other analyses is continuing, and the plants will not transition from mode 5 to mode 4 until this issue is resolved. Additional corrective actions identified will be reported in the supplement to this LER.
NRC FORM 366A (4-95)