ML18039A910: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
| issue date = 12/14/2017 | | issue date = 12/14/2017 | ||
| title = 2017 Byron Station Initial License Examination Forms ES-301-5 Revision 0 | | title = 2017 Byron Station Initial License Examination Forms ES-301-5 Revision 0 | ||
| author name = Seymour J | | author name = Seymour J, Bielby M | ||
| author affiliation = NRC/RGN-III/DRS/OLB | | author affiliation = NRC/RGN-III/DRS/OLB | ||
| addressee name = | | addressee name = | ||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:ES-301 Transient and Event Checklist Form ES-301-5 | {{#Wiki_filter:ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew A) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I | ||
Byron | C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*) | ||
12/04/17 Operating Test No.: | T P E I-1 I-2 R-1 I-2 I-1 R-1 I-1 R-1 I-2 R I U RO RX 1 2 4 3 1 1 0 NOR 1 1 1 1 1 SRO-I I-1 I/C 2,3,4 5,7 2,6,7 12 4 4 2 SRO-U ,5.6 ,8,9 MAJ 7 8 10 3 2 2 1 TS 2,6 3,5,6 5 0 2 2 RX 1 2 2 1 1 0 RO NOR 1 1,4 3 1 1 1 SRO-I I/C 2,4 4,5,6 6,8,9 9 4 4 2 I-2 ,7 SRO-U MAJ 7 8 10 3 2 2 1 TS 3,5 2 0 2 2 RO RX 4 1 1 1 0 R-1 NOR 1 1 2 1 1 1 SRO-I I/C 3,5, 4,6 2,7 7 4 4 2 SRO-U 6, MAJ 7 8 10 3 2 2 1 TS 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 | ||
2017-301 A P | |||
ES-301 Transient and Event Checklist Form ES-301-5 | ES-301 Transient and Event Checklist Form ES-301-5 Instructions: | ||
: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | |||
: 1. Check the applicant level and enter the operating test number and Form ES | : 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis. | ||
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at | : 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns. | ||
-the-controls (ATC) and balance | : 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. | ||
-of-plant (BOP) positions. Instant SROs (SRO | |||
-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO | |||
-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | |||
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. | |||
-for-one basis. | |||
: 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the | |||
-hand columns | |||
-I applicants in either the ATC or BOP position to best evaluate the SRO | |||
-I in manipulating plant controls. | |||
ES-301 Transient and Event Checklist Form ES-301-5 | ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew B) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I | ||
-301 A P | C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*) | ||
T P E U-1 R-2 R-3 U-1 R-2 R-3 R I U RO RX 1 4 2 1 1 0 NOR 1 1 1 1 1 SRO-I I/C 2,3,4 2,6,7 10 4 4 2 SRO-U ,5.6 ,8,9 U-1 MAJ 7 10 2 2 2 1 TS 2,6 3,5,6 5 0 2 2 RO RX 1 1 1 1 0 R-2 NOR 1,4 2 1 1 1 SRO-I I/C 2,4 6,8,9 5 4 4 2 SRO-U MAJ 7 10 2 2 2 1 TS 0 0 2 2 RO RX 4 1 1 1 0 R-3 NOR 1 1 1 1 1 SRO-I I/C 3,5, 2,7 5 4 4 2 SRO-U 6, MAJ 7 10 2 2 2 1 TS 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 | |||
ES-301 Transient and Event Checklist Form ES-301-5 | ES-301 Transient and Event Checklist Form ES-301-5 Instructions: | ||
-301 A P P L I C A | : 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | ||
: 1. Check the applicant level and enter the operating test number and Form ES | : 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis. | ||
-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at | : 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns. | ||
-the-controls (ATC) and balance | : 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. | ||
-of-plant (BOP) positions. Instant SROs (SRO | |||
-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO | ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew C) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I | ||
-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*) | ||
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. | T P E I-3 R-4 Surr Surr I-3 R-4 R I U RO RX 2 7 2 1 1 0 NOR 1 1 1 1 1 SRO-I I-3 I/C 4,5,6 2,5,9 7 4 4 2 SRO-U ,7 MAJ 8 8 2 2 2 1 TS 3,5 2 0 2 2 RX 2 1 1 1 0 RO R-4 NOR 1,7 2 1 1 1 SRO-I I/C 5,7 3,6, 5 4 4 2 10 SRO-U MAJ 8 8 2 2 2 1 TS 0 0 2 2 RO RX 7 NA 1 1 0 NOR 1 1 NA 1 1 1 SRO-I I/C 4,6 2,3,5 NA 4 4 2 SRO-U ,6 MAJ 8 8 NA 2 2 1 TS 4 NA 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 | ||
-for-one basis. | |||
: 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the | ES-301 Transient and Event Checklist Form ES-301-5 Instructions: | ||
-hand columns. | : 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | ||
: 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO | : 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis. | ||
-I applicants in either the ATC or BOP position to best evaluate the SRO | : 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns. | ||
-I in manipulating plant controls.}} | : 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls. | ||
ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew D) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I | |||
C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*) | |||
T P E I-4 I-5 R-5 I-5 I-4 R-5 I-4 R-5 I-5 R I U RO RX 1 2 7 3 1 1 0 NOR 1 1 1 1 1 SRO-I I-4 I/C 2,3,4 5,7 2,3,5 11 4 4 2 SRO-U ,5.6 ,6 MAJ 7 8 8 3 2 2 1 TS 2,6 4 3 0 2 2 RX 1 2 2 1 1 0 RO NOR 1 1,7 3 1 1 1 SRO-I I/C 2,4 4,5,6 3,6, 9 4 4 2 I-5 ,7 10 SRO-U MAJ 7 8 8 3 2 2 1 TS 3,5 2 0 2 2 RO RX 7 1 1 1 0 R-5 NOR 1 1 2 1 1 1 SRO-I I/C 3,5, 4,6 2,5,9 8 4 4 2 SRO-U 6, MAJ 7 8 8 3 2 2 1 TS 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 | |||
ES-301 Transient and Event Checklist Form ES-301-5 Instructions: | |||
: 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position. | |||
: 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis. | |||
: 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns. | |||
: 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.}} |
Latest revision as of 23:00, 21 October 2019
ML18039A910 | |
Person / Time | |
---|---|
Site: | Byron |
Issue date: | 12/14/2017 |
From: | Jesse Seymour, Bielby M NRC/RGN-III/DRS/OLB |
To: | Exelon Generation Co |
Shared Package | |
ML17152A385 | List: |
References | |
Download: ML18039A910 (8) | |
Text
ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew A) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I
C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)
T P E I-1 I-2 R-1 I-2 I-1 R-1 I-1 R-1 I-2 R I U RO RX 1 2 4 3 1 1 0 NOR 1 1 1 1 1 SRO-I I-1 I/C 2,3,4 5,7 2,6,7 12 4 4 2 SRO-U ,5.6 ,8,9 MAJ 7 8 10 3 2 2 1 TS 2,6 3,5,6 5 0 2 2 RX 1 2 2 1 1 0 RO NOR 1 1,4 3 1 1 1 SRO-I I/C 2,4 4,5,6 6,8,9 9 4 4 2 I-2 ,7 SRO-U MAJ 7 8 10 3 2 2 1 TS 3,5 2 0 2 2 RO RX 4 1 1 1 0 R-1 NOR 1 1 2 1 1 1 SRO-I I/C 3,5, 4,6 2,7 7 4 4 2 SRO-U 6, MAJ 7 8 10 3 2 2 1 TS 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2
ES-301 Transient and Event Checklist Form ES-301-5 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew B) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I
C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)
T P E U-1 R-2 R-3 U-1 R-2 R-3 R I U RO RX 1 4 2 1 1 0 NOR 1 1 1 1 1 SRO-I I/C 2,3,4 2,6,7 10 4 4 2 SRO-U ,5.6 ,8,9 U-1 MAJ 7 10 2 2 2 1 TS 2,6 3,5,6 5 0 2 2 RO RX 1 1 1 1 0 R-2 NOR 1,4 2 1 1 1 SRO-I I/C 2,4 6,8,9 5 4 4 2 SRO-U MAJ 7 10 2 2 2 1 TS 0 0 2 2 RO RX 4 1 1 1 0 R-3 NOR 1 1 1 1 1 SRO-I I/C 3,5, 2,7 5 4 4 2 SRO-U 6, MAJ 7 10 2 2 2 1 TS 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2
ES-301 Transient and Event Checklist Form ES-301-5 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew C) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I
C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)
T P E I-3 R-4 Surr Surr I-3 R-4 R I U RO RX 2 7 2 1 1 0 NOR 1 1 1 1 1 SRO-I I-3 I/C 4,5,6 2,5,9 7 4 4 2 SRO-U ,7 MAJ 8 8 2 2 2 1 TS 3,5 2 0 2 2 RX 2 1 1 1 0 RO R-4 NOR 1,7 2 1 1 1 SRO-I I/C 5,7 3,6, 5 4 4 2 10 SRO-U MAJ 8 8 2 2 2 1 TS 0 0 2 2 RO RX 7 NA 1 1 0 NOR 1 1 NA 1 1 1 SRO-I I/C 4,6 2,3,5 NA 4 4 2 SRO-U ,6 MAJ 8 8 NA 2 2 1 TS 4 NA 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2
ES-301 Transient and Event Checklist Form ES-301-5 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301 Transient and Event Checklist Form ES-301-5 Facility: Byron (Crew D) Date of Exam: 12/04/17 Operating Test No.: 2017-301 A E Scenarios P V 1 2 3 4 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I
C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)
T P E I-4 I-5 R-5 I-5 I-4 R-5 I-4 R-5 I-5 R I U RO RX 1 2 7 3 1 1 0 NOR 1 1 1 1 1 SRO-I I-4 I/C 2,3,4 5,7 2,3,5 11 4 4 2 SRO-U ,5.6 ,6 MAJ 7 8 8 3 2 2 1 TS 2,6 4 3 0 2 2 RX 1 2 2 1 1 0 RO NOR 1 1,7 3 1 1 1 SRO-I I/C 2,4 4,5,6 3,6, 9 4 4 2 I-5 ,7 10 SRO-U MAJ 7 8 8 3 2 2 1 TS 3,5 2 0 2 2 RO RX 7 1 1 1 0 R-5 NOR 1 1 2 1 1 1 SRO-I I/C 3,5, 4,6 2,5,9 8 4 4 2 SRO-U 6, MAJ 7 8 8 3 2 2 1 TS 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2
ES-301 Transient and Event Checklist Form ES-301-5 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.