Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML18096A831 + (ML18096A831)
- ML18096A832 + (ML18096A832)
- ML18096A834 + (ML18096A834)
- ML18096A835 + (ML18096A835)
- ML18096A836 + (ML18096A836)
- ML18096A837 + (ML18096A837)
- ML18096A838 + (ML18096A838)
- ML18096A839 + (ML18096A839)
- ML18096A844 + (ML18096A844)
- ML18096A845 + (ML18096A845)
- IR 05000272/1992010 + (ML18096A847)
- ML18096A853 + (ML18096A853)
- ML18096A854 + (ML18096A854)
- ML18096A856 + (ML18096A856)
- ML18096A858 + (ML18096A858)
- 05000272/LER-1992-014, :on 920626,results of Radiographic Exam on SG 13 Indicated Weld Between Feedwater Nozzle & Elbow Had Number of Unacceptable Linear Indications.Caused by Equipment Failure.Indications Removed + (ML18096A859)
- ML18096A860 + (ML18096A860)
- 05000272/LER-1992-011, :on 920523 & 0627,ESF Signal Actuations for Control Room Ventilation Automatically Switched from Normal to Accident Mode of Operation.Caused by RMS Channel Spike. Detector Connector Grommet Replaced + (ML18096A862)
- 05000272/LER-1992-016, :on 920701,discovered That Fire Watch Rove Personnel Were Apparently Not Performing Rounds.Caused by Failure to Comply W/Instructions.Applicable Personnel Suspended & Event Reviewed W/Employees + (ML18096A863)
- ML18096A864 + (ML18096A864)
- ML18096A866 + (ML18096A866)
- ML18096A867 + (ML18096A867)
- ML18096A870 + (ML18096A870)
- ML18096A871 + (ML18096A871)
- ML18096A873 + (ML18096A873)
- ML18096A875 + (ML18096A875)
- ML18096A876 + (ML18096A876)
- ML18096A877 + (ML18096A877)
- ML18096A879 + (ML18096A879)
- 05000272/LER-1992-004, :on 920128,observed That R46 RMS MSL Radiation Monitor Detector Not One Ref by Calibr Procedure During Channel Calibr.Caused by Personnel error.R46 Channels Having Tec M701 Detector Replaced + (ML18096A881)
- 05000311/LER-1992-008, :on 920501 & 0713,main Steamline Isolation Resulted in ESF Signal Actuations & Trip of Low T Bistables. Caused by Design,Mfg,Const/Installation Inadequacy.Mods to Correct Flow Sensing Line Concerns Underway + (ML18096A882)
- ML18096A883 + (ML18096A883)
- ML18096A884 + (ML18096A884)
- ML18096A886 + (ML18096A886)
- ML18096A887 + (ML18096A887)
- ML18096A888 + (ML18096A888)
- ML18096A889 + (ML18096A889)
- ML18096A890 + (ML18096A890)
- ML18096A892 + (ML18096A892)
- ML18096A893 + (ML18096A893)
- 05000311/LER-1992-011-01, :on 920717 & 18,TS 3.0.3 Entered When Analog Rod Position Indications for Control Rods Indicated Greater than Plus or Minus 12 Step Deviation from Group Demand Counter.Caused by Sys Design.Sys Evaluated + (ML18096A895)
- ML18096A896 + (ML18096A896)
- ML18096A897 + (ML18096A897)
- ML18096A898 + (ML18096A898)
- ML18096A899 + (ML18096A899)
- ML18096A900 + (ML18096A900)
- ML18096A902 + (ML18096A902)
- ML18096A903 + (ML18096A903)
- ML18096A904 + (ML18096A904)
- ML18096A906 + (ML18096A906)
- ML18096A907 + (ML18096A907)