Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML18094B178 + (ML18094B178)
- ML18094B179 + (ML18094B179)
- ML18094B183 + (ML18094B183)
- ML18094B184 + (ML18094B184)
- ML18094B185 + (ML18094B185)
- ML18094B187 + (ML18094B187)
- ML18094B188 + (ML18094B188)
- ML18094B189 + (ML18094B189)
- ML18094B190 + (ML18094B190)
- ML18094B191 + (ML18094B191)
- ML18094B192 + (ML18094B192)
- ML18094B193 + (ML18094B193)
- PNO-I-89-095, on 891201,unit Initiated Cold Shutdown to Mode 4 Due to Nearing Expiration of Tech Spec Action Statement. Containment Insp Revealed Body to Bonnet Leak on Safety Injection Check Valve.Repairs Completed + (ML18094B194)
- ML18094B195 + (ML18094B195)
- ML18094B196 + (ML18094B196)
- ML18094B197 + (ML18094B197)
- 05000272/LER-1989-032, :on 891109,during Turbine Volumetric Flow Test, power-range Channels Could Not Be Adjusted to 100% Power Due to Bottoming Out of Fine Gain Potentiometer.Caused by Personnel Error.Directives Reviewed + (ML18094B198)
- ML18094B200 + (ML18094B200)
- ML18094B201 + (ML18094B201)
- ML18094B202 + (ML18094B202)
- ML18094B204 + (ML18094B204)
- ML18094B205 + (ML18094B205)
- ML18094B206 + (ML18094B206)
- ML18094B207 + (ML18094B207)
- ML18094B208 + (ML18094B208)
- ML18094B209 + (ML18094B209)
- ML18094B210 + (ML18094B210)
- IR 05000272/1989081 + (ML18094B212)
- ML18094B213 + (ML18094B213)
- ML18094B214 + (ML18094B214)
- ML18094B215 + (ML18094B215)
- ML18094B216 + (ML18094B216)
- ML18094B217 + (ML18094B217)
- ML18094B218 + (ML18094B218)
- ML18094B219 + (ML18094B219)
- ML18094B220 + (ML18094B220)
- ML18094B221 + (ML18094B221)
- ML18094B222 + (ML18094B222)
- ML18094B223 + (ML18094B223)
- ML18094B224 + (ML18094B224)
- ML18094B225 + (ML18094B225)
- ML18094B226 + (ML18094B226)
- 05000272/LER-1989-034, :on 891201,09,14 & 15,plant Vent Noble Gas Monitor Channel Failed Low,Causing Isolation of Containment Purge/Pressure Vacuum Relief Sys.Caused by Recessed Pin in Control Module.Equipment to Be Replaced + (ML18094B227)
- 05000272/LER-1989-033, :on 891201 & 02,plant Entered Mode 3 (Standby) & Mode 4 (Hot Shutdown),Respectively,Per Tech Spec Action Statement 3.5.2a.Caused by Centrifugal Charging Pump 891128 Failure.Pump Repaired & Maint Program Reviewed + (ML18094B228)
- ML18094B229 + (ML18094B229)
- ML18094B230 + (ML18094B230)
- ML18094B231 + (ML18094B231)
- ML18094B232 + (ML18094B232)
- ML18094B233 + (ML18094B233)
- ML18094B234 + (ML18094B234)
- ML18094B235 + (ML18094B235)