ML20154S153

From kanterella
Jump to navigation Jump to search
Registry of Radioactive Sealed Sources & Devices,Safety Evaluation of Radiographic Source Assembly for Model A-13-A. Certificate:NR-300-S-875-S
ML20154S153
Person / Time
Issue date: 10/21/1998
From: Michele Burgess, John Lubinski
NRC
To:
Shared Package
ML20154R650 List:
References
SSD, NUDOCS 9810270323
Download: ML20154S153 (6)


Text

,. 7. _,

(.

r s

I'

+

REGISTRY lOF RADIOACTIVE SEALED SOURCES AND. DEVICES

~ SAFETY EVALUATION OF SEALED SOURCE NO-: 1NR-300-S-875-S DATE:

OCT 21 1999 PAGE 1 OF 5

. SEALED SOURCE TYPE: Radiographic Source Assembly

,MODEL:

A-13-A MANUFACTURER / DISTRIBUTOR:

Gamma Industries, Inc.

P.0,. Box 2543 Baton Rouge, LA 70821 i

. ISOTOPE:

MAXIMUM ACTIVITY:

? Iridium-192 36 Ci (1.33 TBq) 1 LEAK TEST' FREQUENCY:

6 Months i

l 4

. PRINCIPAL USE:

(A) Industrial Radiography

~

' CUSTOM SOURCE:

YES X

NO

.'9810270323 981021 C

PDR RC SSD PDR 1

..c w..,.

~.

lt L

. REGISTRY OF RADIOACTIVE SEALED SOURCES'AND DEVICES l

, SAFETY EVALUATION 0F SEALED SOURCE NO. : NR -3 00-S-875-S

'DATE:

OCT 21 1993-PAGE 2 OF 5 SEALED SOURCE TYPE:. Radiographic Source Assembly DESCRIPTION:

The Gamma Industries Model A-13-A source assembly is: designed for Luserin the Gamma Industries Model 2-15SA exposure. device.

The active material is metallic-Iridium-192, singly encapsulated in type 304 or-316 stainless steel, using a heliarc_ welding

~

technique.

This source assembly-is a departure from the usual radiography source in that'it contains two (2) sources on a single pigtail, separated by a maximum distance of-four (4) inches (10.16 cm).

The source capsules' closest to the connector in;the assembly _usesla~ side-weld closure, and the source capsule furthest from the connector in the assembly.uses an end-cap closure.

The pigtail connector,. source capsules and locking ball are crimped to 1/8 inch (3.18 mm) stainless steel cable.

-LABELING:

The source capsules ~are_not large.enough to allow' direct labeling.

However, the exposure' device which contains the source capsules-is labeled; and for additional labeling information, please see the certificate of; registration andisafety analysis.

summary for the Gamma' Industries Model-2-15SA exposure device.

DIAGRAM:

See. Attachment 1.

CONDITIONS OF NORMAL USE:

The Gamma Industries Model A-13-A source assembly is intended for

-use only_in the Gamma Industries Model 2-15SA Industrial Radiography exposure devices.

Gamma emission is checked against a standard using an ion chamber.

A decay chart and source tag are supplied with each source, providing information concerning the activity and leak test results.

l:

!p k

L' REGISTRY-OF-' RADIOACTIVE SEALED SOURCES AND DEVICES L

' SAFETY EVALUATION OF SEALED SOURCE L

L

~NO.:-NR-300-S-875-S DATE2 OCT 211998 PAGE 3'OF 5 E

~

r i

SEALED SOURCE TYPE:~Radi' graphic Source Assembly _

o Ph0TOTYPEITESTING:

This' source assembly consists of a singly encapsulated universal

-end-weld. capsule and a singly encapsulated side-weld capsule on a l

single pigtail. :Both capsules have.an ANSI classification of 1

77E43515, as described in ANSI' publication N542-1977.

Based on prototype; test data, these, designs are expected to. retain containmentcintegrity under accident conditions likely to occur

'during normal use or transportation.

7

)

EXTERNAL RADIATION LEVELS:

E The-dose rate from unshielded source of iridium-192 is approximately'5.9 R/hr per curie at 1 ft (30.48 cm).

? QUALITY' ASSURANCE AND' CONTROL:

The manufacturer. maintains pigtail dimensional tolerances at

-11/16 inch (il.59 rmn).

Each source assembly is subjected to, and

.must-successfully pass with no visible distortion, a 200 pound (90.72.kg) pull test prior to insertion of radioactive material.

"After encapsulation,. afwipe test for contamination is made.

If

.the results are doubtful 'then a hot water bubble test is performed.

No source'is shipped,if; removable contamination s

-exceeds 0.005. microcurie ~(185,Bq).

LIMITATIONS AND/OR OTHER'CONSIDERhTIONS OF'USE:

'The.Model-A-13-A=shallsbe possessed and used by specific licensees of U.S$ NRC or AgreementiStates.

O

. These sealed source? designs shall not be subjected to environmental or other conditions'of useJwhich exceed ANSI

-classification 7.7E43515.

F l

f.

b

. ~. _

REGISTRY OF RADIOACTIVE SEALED SOURCES AND DEVICES SAFETY EVALUATION OF SEALED SOURCE I

NO.: NR-300-S-875-S DATE:

OCT 21 1998 PAGE 4 OF 5 SEALED SOURCE TYPE: Radiographic Source Assembly

~

-LIMITATIONS AND/OR OTHER CONSIDERATIONS OF USE (Cont'd)-

. These sources shall.be leak tested.at intervals not to exceed six (6) months using techniques approved by the licensing authority and capable of detecting 0.005 microcurie (185 Bq) of removable contamination.

. The source assembly.is designed for use in the Gamma Industries Model 2-15SA exposure. device which shall be labeled in accordance with applicable regulations.

. Handling, storage, use, transfer, and. disposal:

To be determined-by the licensing authority.

j This registration' sheet and the information cortained within the references.shall not-be changed withoutithe written consent of the'NRC.

-SAFETY ANALYSIS 1

SUMMARY

The Model'A-13-A source is nollonger manufactured or distributed by Gamma Industries,.Inc. and Gamma Industries, Inc. is no longer in. business.

Therefore,- the registration certificate is being converted to an inactive registration certificate.

The' source was originally approved for licensing purposes by the

. Louisiana Division of Radiation Control.

NRC attempted to obtain copies of all information submitted by the registrant in support of:theLevaluation.

However, NRC could not 1ocate all the information.

Therefore, no safety evaluation of the source was

. performed'as part of the conversion of the certificate to

' inactive status, l

i

REFERENCES:

i The following supporting documents for the Model A-13-A are hereby incorporated by reference and are made a part of this registry document.

i I~

i REGISTRY OF RADIOACTIVE SEALED SOURCES AND DEVICES SAFETY EVALUATION OF SEALED SOURCE I

NO.: NR-300-S-875-S DATE:

PAGE 5 OF 5

-SEALED SOURCE TYPE: Radiographic Source Assembly REFERENCES (Cont'd)-

Information provided by Gamma Industries in correspondence dated April 11, 1980 and April 22, 1981.

ISSUING AGENCY:

U.S. Nuclear Regulatory Commission

,/

OCT 21 1998 d

Date:

Reviewer:

// py John'W. Lubinski

_I_dadd mYh%w Date:

Concurrence:

Michele L. Burgesh

.]

y R.EGISTRY.OF-RADIOACTIVEJSEALED SOURCES AND DEVICES SAFETY EVALUATION-OF SEALED.. SOURCE A

- NO. : - NR[3 00-S-87 5--S

.DATE:

. I ISSO

. ATTACHMENT l'

~

a I

s

'i i

.-' k,k

-)

i' l~

i e 7so-

'2.3 75 MAX :. j,'

n e7 I

"L h g *[ "y ? " '

u d.ms%w[._J^

44 TiG w eto e./

,v 1

i l

4

if.

m

,