|
---|
Category:Manual
MONTHYEARML23110A1122023-04-20020 April 2023 Annual Report for Entergy Quality Assurance Program Manual Changes Under 10 CFR 50.54(a)(3), 10 CFR 71.106, and 10 CFR 72.140(d). Notification of Application of Approved Appendix B to 10 CFR 72 Subpart G ML23018A2202023-01-18018 January 2023 Quality Assurance Program Manual Reduction in Commitment ML22104A0782022-04-14014 April 2022 Annual Report for Entergy Quality Assurance Program Manual Changes Under 10 CFR 50.54(a)(3), 10 CFR 71.106, and 10 CFR 72.140(d). Notification of Application of Approved Appendix B to 10 CFR 72 Subpart G W3F1-2021-0035, Technical Requirements Manual Update2021-05-18018 May 2021 Technical Requirements Manual Update W3F1-2017-0080, Submittal of Technical Requirements Manual Update2017-12-0606 December 2017 Submittal of Technical Requirements Manual Update ML17341A6652017-12-0606 December 2017 Technical Requirements Manual Update to the NRC ML17109A4872017-04-10010 April 2017 Annual Report for Quality Assurance Program Manual Changes Under 10 CFR 50.54(a)(3), 10 CFR 71.106, and 10 CFR 72.140(d) Notification of Application of Approved Appendix B to 10CFR72 Subpart G W3F1-2016-0040, Technical Requirements Manual Update to the NRC2016-06-0202 June 2016 Technical Requirements Manual Update to the NRC ML16132A5102015-10-15015 October 2015 3 to EN-RW-102, Radioactive Shipping Procedure. ML16132A5072015-08-27027 August 2015 to EN-RW-105, Process Control Program. ML16132A5082015-04-0808 April 2015 to EN-RW-106, Integrated Transportation Security Plan. ML16132A5062015-04-0202 April 2015 2 to EN-RW-104, Scaling Factors. W3F1-2016-0038, UNT-005-014, Rev. 306, Offsite Dose Calculation Manual.2015-03-12012 March 2015 UNT-005-014, Rev. 306, Offsite Dose Calculation Manual. ML15086A2112015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm3411 ML15086A1812015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/SEC2.0 ML15086A1822015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/SEC5.0 ML15086A1832015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/SEC6.0 ML15086A1862015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm340 ML15086A1872015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm341 ML15086A1892015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm344 W3F1-2015-0023, Technical Requirements Manual/Trm Revision 128/Trm34122015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm3412 ML15086A2102015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trmintro ML15086A2092015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trmindex ML15086A2082015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trmbases ML15086A2062015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm349 ML15086A1882015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm343 ML15086A2032015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm346 ML15086A2042015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm347 ML15086A2052015-03-10010 March 2015 Technical Requirements Manual/Trm Revision 128/Trm348 ENOC-13-00029, Planned Modification of the Entergy Quality Assurance Program Manual (EA-11-096)2013-11-0404 November 2013 Planned Modification of the Entergy Quality Assurance Program Manual (EA-11-096) CNRO-2013-00007, Annual Report for Quality Assurance Program Manual Changes Under 10 CFR 50.54(a) and 10 CFR 72.140(d) Notification of Application of Approved Appendix B to 10 CFR 72 Subpart G2013-04-26026 April 2013 Annual Report for Quality Assurance Program Manual Changes Under 10 CFR 50.54(a) and 10 CFR 72.140(d) Notification of Application of Approved Appendix B to 10 CFR 72 Subpart G W3F1-2011-0018, License Amendment Request to Relocate Technical Specifications to the Technical Requirements Manual2011-11-21021 November 2011 License Amendment Request to Relocate Technical Specifications to the Technical Requirements Manual W3F1-2011-0033, UNT-005-014, Rev. 302, Offsite Dose Calculation Manual.2011-02-14014 February 2011 UNT-005-014, Rev. 302, Offsite Dose Calculation Manual. ML0904103222008-04-15015 April 2008 Entergy'S Quality Assurance Program Manual, Revision 18; Effective: April 15, 2008 ENOC-07-00020, Entergy Nuclear Operations, Inc., Annual Report for Quality Assurance Program Manual Changes, Revision 162007-06-15015 June 2007 Entergy Nuclear Operations, Inc., Annual Report for Quality Assurance Program Manual Changes, Revision 16 CNRO-2005-00024, Entergy Quality Assurance Program Manual, Revision 122005-04-0606 April 2005 Entergy Quality Assurance Program Manual, Revision 12 ML0612303022004-10-20020 October 2004 Corp. Administrative Procedure AP 31A-100, Revision 5, Solid Radwaste Process Control Program. ML0612303002004-09-29029 September 2004 Corp. Administrative Procedure AP 07B-003, Revision 5, Offsite Dose Calculation Manual. ML0512504582004-09-0909 September 2004 Attachment 11.1, UNT-005-514, Offsite Dose Calculation Manual, Revision 7, Change 1 & 2 ML0612800752004-08-12012 August 2004 Amendment 92, Move Pressurizer Heat-up and Cooldown Limits to TRM and Remove Shutdown Requirements ML0612800742004-07-27027 July 2004 Amendment 91, New TRM 3.0/4.0 Section, Remove Shutdown Requirments Form TRM ML0312600022003-04-24024 April 2003 Issuance of Entergy Quality Assurance Program Manual (Qapm), Revision 8 2023-04-20
[Table view] |
Text
3/4 0-1 AMENDMENT NO. 91 (DRN 04-1191, Am. 91) 3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REQUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION (LCO) 3.0.1 Compliance with the Limiting Conditions for Operation contained in the succeeding specifications is required during the OPERATIONAL MODES or other conditions specified therein; except that upon failure to meet the LCO, the associated ACTION requirements shall be met.
3.0.2 Noncompliance with a specification shall exist when the requirements of the LCO and/or associated ACTION requirements are not met within the specified time intervals. If the LCO is restored prior to expiration of the specified time intervals, completion of the ACTION requirements is not required.
3.0.3 When a LCO is not met and the associated ACTIONs are not met, or an associated ACTION is not provided, or if directed by the associated ACTIONs, communicate the condition to the General Manager-Plant Operations or his designee (e.g. duty plant manager) as soon as practicable, but no later than 7 hours8.101852e-5 days <br />0.00194 hours <br />1.157407e-5 weeks <br />2.6635e-6 months <br />; and initiate a condition report to document the condition, and determine any limitations for continued operation of the plant. Exceptions to this LCO are stated in the individual requirements. LCO 3.0.3 is only applicable in MODES 1, 2, 3, and 4.
3.0.4 Entry into an OPERATIONAL MODE or other specified condition in the Applicability shall not be made when the conditions for a LCO are not met AND the corrective action process has determined that limitations should be placed on continued plant operation in the desired OPERATIONAL MODE to be entered. Entry into an OPERATIONAL MODE or other specified condition may be made in accordance with ACTION requirements when the ACTION or the corrective action process has determined that no limitations should be placed on continued plant operation in the desired MODE to be entered. This provision shall not prevent changes in OPERATIONAL MODES or other specified conditions in the Applicability that are required to comply with ACTION requirements or that are part of a shutdown of the plant. Exceptions to this LCO are stated in the individual requirements.
3.0.5 Equipment removed from service or declared inoperable to comply with ACTIONs may be returned to service under administrative control solely to perform testing required to demonstrate OPERABILITY or the OPERABILITY of other equipment. This is an exception to LCO 3.0.2 for the system returned to service under administrative control to perform the testing to demonstrate OPERABILITY. (DRN 04-1191, Am. 91) 3/4 0-2 AMENDMENT NO. 91 (DRN 04-1191, Am. 91) APPLICABILITY SURVEILLANCE REQUIREMENTS (SR) 4.0.1 Surveillance Requirements shall be met during the OPERATIONAL MODES or other specified conditions in the Applicability for individual LCOs, unless otherwise stated in the SR. Failure to meet a SR, whether such failure is experienced during the performance of the SR or between performances of the SR, shall be failure to meet the LCO. Failure to perform a SR within the specified interval shall be failure to meet the LCO except as provided in 4.0.3.
Surveillances do not have to be performed on inoperable equipment or variables outside specified limits.
4.0.2 Each SR shall be performed within its specified surveillance interval with a maximum allowable extension not to exceed twenty-five percent (25%) of the specified surveillance interval.
4.0.3 If it is discovered that a SR was not performed within its specified interval then compliance with the requirement to declare the LCO not met may be delayed, from the time of the discovery, up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> or up to the limit of the specified surveillance interval, whichever is greater. This delay period is permitted to allow performance of the SR. A risk evaluation shall be performed for any SR delayed greater than 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> and the risk impact shall be managed.
If the SR is not performed within the delay period, the LCO must immediately be declared not met, and the applicable ACTION(s) must be entered.
When the SR is performed within the delay period and the SR is not met, the LCO must immediately be declared not met, and the applicable ACTION(s) must be entered.
4.0.4 Entry into an OPERATIONAL MODE or other specified condition shall not be made unless the SR(s) associated with the LCO have been performed within the stated surveillance interval or as otherwise specified. This provision will not prevent passage through or to OPERATIONAL MODES as required to comply with ACTION requirements. (DRN 04-1191, Am. 91)