NL-06-1766, Unit 1, Inservice Inspection Summary Report

From kanterella
Revision as of 02:36, 14 March 2020 by StriderTol (talk | contribs) (StriderTol Bot change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Unit 1, Inservice Inspection Summary Report
ML062290483
Person / Time
Site: Farley Southern Nuclear icon.png
Issue date: 08/17/2006
From: Sumner H
Southern Nuclear Operating Co
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
NL-06-1766
Download: ML062290483 (123)


Text

H. L. Sumner. Jr. Southern Nuclear Vice Pres~dent Operating Company, Inc.

40 lnverness Center Parkway Pr~stOffice Box 1295 B rmingharn, Alabarna 35201 SOUTHERN COMPANY August 17, 2006 Energy to Serve Your WorldSM Docket No.: 50-348 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D. C. 20555-000 1 Joseph M. Farley Nuclear Plant - Unit 1 Inservice Inspection Summary Report Ladies and Gentlemen:

Southern Nuclear Operating Company (SNC) submits herewith the Farley IVuclear Plant (FNP) Unit 1, Interval 3, Period 3, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the Unit 1 Spring 2006 maintenancelrefueling outage. Paragraph IWA-6230 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI, 1989 Edition requires submittal of the enclosed report. Also included in the report are inspection results required by Farley Nuclear Plant Technical Specification 5.6.10.

This letter contains no NRC commitments. If you have any questions, please advise.

Sincerely, H. L. Surnner, Jr.

Enclosure:

FNP Interval 3, Period 3, Outage 2 Inservice Inspection Report Tabs A, B, C, and D

U. S. Nuclear Regulatory Commission NL-06-1766 Page 2 cc: Southern Nuclear Operating, Company Mr. J. T. Gasser, Jr., Executive Vice President (W/OEnclosure)

Mr. J. R. Johnson, General Manager - Plant Farley (W/OEnclosure)

RTYPE: CFA04.054, LC# 14472 U. S. Nuclear Regulatory Commission Dr. W. D. Travers, Regional Administrator (W/OEnclosure)

Mr. R. E. Martin, NRR Project Manager - Farley (W/OEnclosure)

Mr. C. A. Patterson, Senior Resident Inspector - Farley (w/o Enclosure)

Joseph M. Farley Nuclear Plant - Unit 1 Inservice Inspection Summary Report Enclosure FNP Interval 3, Period 3, Outage 2 Inservice Inspection Report Tabs A, B, C, and D

INSERVICE INSPECTION REPORT Date of Document Completion: August 7,2006 REFUELING 20 INTERVAL 3 PERIOD 3 OUTAGE 2 J. M. FARLEY UNIT I NUCLEAR GENERATING PLANT COLUMBIA, ALABAMA 36319 Commercial Service Date: December 1,1977 Southern Nuclear Operating Company 42 lnverness Parkway Birmingham, Alabama 35242 (as agent for Alabama Power Co.)

INDEX SECTION -

TAB VOLUME 1 FORM NIS-I OWNER'S REPORT FOR INSERVlCE INSPECTION BALANCE O F PLANTIREACTOR VESSEL EXAMINA'TiON

SUMMARY

EXAMINATION PROGRAM PLAN FORM NIS-2 OWNER'S REPORTS FOR REPAIRS AND REPLACEMENTS VOLUME 2 EXAMINATION RESULTS VOLUME 3 ADDITIONAL EXAMINATIONS INDICATIONS PERSONNEL, EQUIPMENT, MATERIAL, & CALiBRATlON BLOCK CERTIFICATIONS EXAMINATION PROCEDURES REACTOR VESSEL INSPECTION T O O L DATA AND KESULTS CLASS 3 SUPPORTS VOLUME 1 CONTAINS T H E INFORMATION T O MEET THE REQUIREMENTS O F ASME CODE 1989 EDITION, SECTION XI, SUBSECTION IWA-6230 F O R SUBMITTAL O F A SUhlMARY REPORT T O T H E NRC FOLLOWING EACH REFUELING OUTAGE.

VOLUMES 2 and 3 CONTAINS T H E SUPPORTING DOCUMENTATION FOR T H E EXAMINATIONS PERFORMED AND W I L L BE RETAINED ON SITE BY FNP.

TAB A Form NIS- 1 Owner's Report for Inservice Inspection

Page 1 of 4 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner Southern Nuclear Operating Company (as anent for Alabama Power Co.)

42 Invemess Center Parkway Birmingham. AL. 35242

2. Plant J. M. Farlev Nuclear Plant (Name and Address of Plant)

H w 95 South Columbia. AL. 363 19

3. Plant Unit 1
4. Owner Certificate of Authorization (if required) N/A
5. Commercial Service Date 1210 1/77
6. National Board Number for Unit See Listed N. B. for each component
7. Components Inspected Manufacturer Component o r Manufacturer or Installer State or National Appurtenance o r Installer Serial No. Province No. Board No.

Reactor Vessel Mitsubishi Heavy B-VH-NO4 NIA 5846 Closure Head Industries, Ltd.

Reactor Vessel Combustion 69104 NIA 21385 Engineering Reactor Coolant Southwest N/A N/A N/A Piping Fabricating Reactor Coolant Westinghouse RCPCPI-1 N/ A N/A Pumps A, B & C EMD RCPCP1-2 RCPCPI-3 Pressurizer Westinghouse 1431 N/A 68-103 Tampa Class 1 Piping Daniel N/A N/A N/A Construction Class 2 Piping Daniel N/A NIA N/A Construction Steam Generator Westinghouse ALAD-40304 N/A 70 A,B&C Pensacola ALAD-40305 71 ALAD-40306 72

8. Examination Dates 11/14/04 to 05/22/06
9. Inspection Period Identification: Third Period 08101104 to 12/01/07
10. Inspection Interval Identification: Third Interval 12/01/97 to 12/01/07
11. Applicable Edition of Section XI 1989 Addenda None
12. DateIRevision of Inspection Plan: FNP-1-M-097; 08/03/06: Revision 6.1
13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Tabs B and C
14. Abstract of Results of Examinations and Tests. See Tab B
15. Abstract of Corrective Measures. See Tab B Note: Supplemental sheets in the form of lists, sketches, or drawings may be used, prov~ded( 1 ) size is 8 112 in. x 1 1 in., (2) information in jtems I through 6 on this report is included on each sheet, and (3) ench sheet is numbered and the number of sheets is recorded at the top of this form.

Page 2 of 4 FORM NIS-1 We certify that: a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code.Section XI.

Certificate of Authorization No. (if applicable) N/A Expiration Date N/A Date A7.7 20 06 Signed Southern Nuekrr Ooerrtine Co.

BY (Owner)

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of R / and employed by HSB-CT of Hartford, Connecticu inspected the components described in this Owner's Report during the period /l//&f- to O$/Z and state that to the best of my knowledge and belief, the Owner has performed8exa&inations and tesdand'taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions R//7F7 &U//

National Board, State, Province, and Endorsements

-?t w Lr 20Ub

Page 3 of 4 OWNER'S REPORT FOR INSERVICE INSPECTION DATE:

OWNER NAME AND ADDRESS: Southern Nuclear Operating Company 42 lnvemess Center Parkway Birmingham, AL. 35242 (as agent for Alabama Power Co.)

NAME AND ADDRESS OF NUCLEAR GENERATING PLANT: Joseph M. Farley Nuclear Plant Highway 95 South Columbia, Alabama 363 19 NAME ASSIGNED TO NUCLEAR POWER UNIT: Joseph M. Farley Nuclear Plant Unit 1 OWNER CERTIFICATE OF AUTHORIZATION:

COMMERCIAL SERVICE DATE: December 1, 1977 NATIONAL BOARD NUMBER: See listed NB's for each component NAME OF COLMPONENTSOR PARTS OF COMPONENTS INVOLVED: Representative samples of the following components and systems were examined using nondestructive examination techniques.

CLASS I COMPONENT OR SYSTEM SYSTEM DESlGNATION Reactor Coolant System B13 Steam Generator B2 1 Pressurizer 8 31 RHR Ell Safety Injection System E2 1

Page 4 of 4 CLASS 2 COMPONENT OR SYSTEM SYSTEM DESIGNATION Steam Generator B2 1 RHR System El 1 CVCS E2 1 Main Steam System N11 Feedwater System N2 1 VT-2 EXAMS FOR RISK-INFORMED COMPONENT OR SYSTEM SYSTEM RI SEGMENT NUMBERS DESIGNATION RCS B13 1RC-0 12A, 1RC-0 1 2 8 , l RC-0 17, 1RC-0 IgA, 1RC-01SB, 1RC-0 18C, 1RC-020A, 1 RC-020B, 1RC-020C, 1RC-026C. 1RC-032A, 1RC-032l3, 1RC-032C, 1 RC-036A, 1RC-036B.

1RC-036C, IRC-04 I A, IRC-054 -

HYDROSTATIC TESTING: SEE TAB B NAME AND ADDRESS OF MANUFACTURER OR INSTALLER OF COMPONENTS:

STEAM GENERATOR PRESSURIZER Westinghouse Electric Corporation Westinghouse Electric Corporation Pensacola Plant No. 5 Tampa Division Pensacola, Florida Tampa, Florida CLASS 1 & 2 PIPING Daniel Construction Co.

Greenville, South Carolina INSERVICE INSPECTION DATES:

NAME OF AUTHORIZED NUCLEAR INSERVICE INSPECTOR: James Haubrich NAME AND MAILING ADDRESS OF INSPECTOR'S EMPLOYER: Hartford Steam Boiler Inspection and insurance Company of Connecticut One State Street Hartford, CT 06 I 03 ABSTRACT: SEE TABS B AND C

TAB B Balance of Plant 1 Reactor Vessel Examination Summary

J. M. FARLEY NUCLEAR PLANT UNIT NO 1 INTERVAL 3 PERIOD 3 OUTAGE 1 BALANCE OF PLANTfREACTOR VESSEL EXAMlNATION

SUMMARY

INTRODUCTION An Inservice examination of Class 1 and 2 components and piping systems was conducted at Farley Nuclear Plant (FNP) Unit 1 during April-May 2006. The examinations were performed in accordance with the approved Examination Program Plan. The primary areas of examination included Pressurizer, Steam Generator C, Main Steam, Safety Injection and Residual Heat RemovaVChemical and Volume Control Piping and supports. The tables documenting the Class 1 and 2 vessel and piping examinations as well as component supports examined are under Tab C of this report.

The program utilized volumetric, surface and visual nondestructive testing methods in accordance with the requirements of ASME Section XI, 1989 Edition.

Selected examinations and related activities were witnessed by representatives of Southern Nuclear Operating Company and its Authorized Inspection Agency. All examinations were performed to the extent practical within geometric and physical limitations.

RESULTS Examinations were performed in accordance with the ASME Section XI Code with the recording of indications meeting the specified ASME Acceptance Standards. The results are summarized below and detailed tables are shown behind Tab C. Indications were evaluated and dispositioned by Indication Evaluation Reports (IER's). A listing of IER's is attached and the data sheets are available at FNP for review.

SUMMARY

OF INDICATIONS CLASS 1 (A) VOLUMETRIC EXAMINATIONS There were no reportable Class I Volumetric indications (B) SURFACE EXAMINATIONS There were no reportable Class 1 Surface indications.

(C) VISUAL EXAMINATIONS There were four piping supports that were acceptable per evaluation with three of those having bolting or nuts tightened and one having spring cans reset to match revised drawing settings. There were thirty bolted connections from the Class 1 pressure tests with various degrees of boron accumulation. In each case the boron was removed, any necessary corrective action was performed and either an evaluation or a re-examination found each one acceptable.

Vol 1 Tab B Summary Narrative.DOC Page 1 of 4

CLASS 2 (A) VOLUMETRIC EXAMINATIONS There was one Class 2 Volumetric indication consisting of a lamination in the base metal adjacent to a main steam piping weld that was acceptable per Section XI tables.

(B) SURFACE EXAM INATIONS There were no reportable Class 2 Surface indications.

(C) VISUAL EXAMINATIONS There were no reportable Class 2 Visual indications associated with piping supports.

IWEOWL EXAMINATIONS An examination of the Unit 1 Containment Building concrete was completed in February 2006 and found to be acceptable. In addition, a physical examination of the Unit I Containment Building unbounded post tensioning system was performed during February and March 2006. The tendon sample consisted of three hoop, three dome and three vertical tendons. The sheathing filler material for each tendon was sampled and showed no signs of fiee water. In addition, the chemical analysis revealed there was no chemically combined water in excess of 10% by weight in any sample. The absolute difference between the amount of filler removed and that replaced never exceeded 10% of the net duct volume.

There was no evidence of excessive grease leakage and no signs of abnormal corrosion for these tendons. Visual inspection of the containment concrete revealed no evidence of any abnormal structural degradation. A visual examination of all accessible grease caps revealed no indication of grease cap deformation. The complete inspection report is available at FNP for review.

Portions of the Unit I Containment Moisture Bamer were replaced in April 2006. As required, the Containment Liner Plate was inspected below the location where the Moisture Barrier was removed and found to be acceptable.

Vol 1 Tab B Summary Narrative.DOC Page 2 of 4

ADDITIONAL EXAMINATIONS Results from additional examinations which were performed during this outage are as follows:

Class 1 System Leakage Test In accordance with ASME Section XI 1989 Edition IWB-5210(a)(l), leak testing of the Class 1 Reactor Coolant System Pressure Boundary was performed prior to startup following the 20th refueling outage. The testing was completed on 05122106. A copy of the completed test procedure FNP-I-SOP- I .4 is retained by the Farley Nuclear Plant Document Control.

In addition, to meet the 1989 Section XI IWA-5242(a) requirement for removal of insulation From bolted connections in "systems borated for the purpose of controlling reactivity" the alternative examination requirements of Relief Request RR-27 was used. RR-27 allowed the insulation to be removed and the bolted connection to be examined for evidence of leakage at static conditions. If evidence of leakage affecting the bolting was apparent, the bolting was removed and examined per IWA-5250(a)(2) and Relief Request RR-41. The class I leakage test was performed and the Code requirements were satisfied.

Class 1 and 2 Hydrotesting No hydrostatic testing was performed during the 20th refueling outage to meet requirements of the current inspection interval.

Class 2 Functionalllnservice Testing Class 2 functional testing performed during the 20th refueling outage included portions of the RHR, Containment Spray, Safety Injection and Charging systems. There were eight bolted connections associated with the Class 2 pressure tests with leakage and various degrees of boron accumulation. Other packing and stem leaks were also observed. The boron accumulation was removed and either an evaluation or a re-examination found each one acceptable. Completed data sheets from FNP- I -STP- 156.1 are filed in FNP Document Control. The Class 2 functional 1 inservice tests were performed and the code requirements were satisfied.

STATUS OF EXAMINATIONS REQUIRED FOR CURRENT INTERVAL This refueling was the 2nd outage, 3rd period of the 3rd interval and the examinations completed are within ASME Code compliance.

Vol I Tab B Summary Narrative.DOC Page 3 of 4

STEAM GENERATOR EDDY-CURRENT EXAMINATION

SUMMARY

Eddy current examination of the lA, I B, and IC Model 54F Steam Generators (SG) was performed during UI R20.

The inspection scope for all three SGs was:

50% full length bobbin 20% hot leg top of tubesheet plus point 50% low row U-bend plus point Plus point of dentsidings >= 2 volts, Plus point of location of loose objects identified during U1 R 18 and U I R19 Plus point of additional tubes at locations corresponding to foreign objects identified during in-bundle visual inspection prior to ECT during this outage (U 1R20).

No indications of wear or corrosion-induced degradation were observed. No crack-like indications were identified.

No challenges to tube integrity were identified by the results of the U1R20 eddy current inspections, and no tube leakage was observed during Cycle 20 operation.

There were no tubes plugged during this inspection outage. Additionally, there are no plugged tubes in SG 1A, 18.

or 1C.

The FNP 1R20 Final Condition Monitoring and Operational Assessment (CMOA) demonstrates that the 1R20 SG eddy current inspection results provide assurance that the Unit 1 SG tube integrity will be maintained to support operation through the upcoming inspection intervals.

Vol I Tab B Steam Generator Narrative. DOC Page 4 of 4

ALA

SUMMARY

OF RECORDED INDICATIONS 2006 UNIT 1 RFZO ITEM INDICATION ACCEPTED PER IER SKETCH ID DESCRIPTION DESCRIPTION EV.+LUATIOY REPAIRIREPL MoNrrOH NUMBER ALAI -4502 RC-R220 Spring Can Settings did not match drawing X 00 1 ALAI-4303 SI-R140 Sway Strut Anchor bolts not fully engaged X 002 Loose bolls on reservoir, thread engagement not visible ALA1-4302 Si-K129 Hydraulic Snubber in inspection hole X 003 ALA2-4300 14-RI Pipe to Penetration Lamination in base metal X 004 Loose nut on the bottom of the ALA1-4207 CVCS-R505 Sway Strut load stud X 005 Pressure Test 160.1- 1, Evidence of Leakage and h'A NA 160.22-1, and 160.23-1 Boron Accumulation X 006 Vol 1 Tab B IER Summary List.DOC

TAB C Examination Program Plan

EXAMINATION PROGRAM PLAN UNIT 1 RF 20 INTERVAL 3 PERIOD 3 OUTAGE 2 2006

Farley Unit 1Refueling Outage 20 Inservice Inspection Report Interval 3, Period 3,1FR20 Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

B-B 18.211 ALA1-21004 PZR B O T O M HEAD TO LOWER FNP-0-NDE-100.34 S06F1U0014 NRI SHELL UT SO6FlUOO15 NRI NRI NRI NRI B-B 162.12 PZR LOWER SHELL LONG SEAM FNP-0-NDE-100.34 S06FlU0019 NRI UT S06F1U0020 NRI NRI NRI B-G-2 187.30 ALA1-3300-NO1 - N32 STEAM GEN. NUTS NMP-ES-024-201 Sat VT- 1 B-G-2 IB7.30 ALA1-3300-SO1 - S32 STEAM GEN. STUDS NMP-ES-024-201 Sat VT-1 BG-2 IB7.50 ALA14303-FLG-1 FLANGE BOLTING NMP-ES-024-201 Sat VT-1 B-G-2 187.50 ALA14501-FLG-1 FLANGE BOLTING NMP-ES-024-201 Sat VT- 1 B-G-2 187.50 ALAl-4502-FLG-1 FLANGE BOLTING FNP-0-NDE-100.21 Sat VT- 1 B-G-2 187.50 ALA14503-FLG-1 FLANGE BOLTING NMP-ES-024-201 Sat VT- 1 B-G2 187.70 ALAl-4501-QV03lA (B) VALVE BOLTING NMP-ES-024-201 Sat VT- 1 B-K 1810.20 ALAI-4207-CVCS-R505 (W) WELDED ATACHMENT NMP-ES-024-301 NRI PT Page 1 of 6

Farley Unit 1Refueling Outage 20 lnsewice Inspection Report Interval 3, Period 3 , l FR20 Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

B-K 1810.20 ALAI-4207-CVCS-R512 (W) WELDED ATTACHMENT NMP-ES-024-301 S06F1PO017 NRI PT B-K 1810.20 ALA1-4303-SI-R134 (W4) WELDED ATTACHMENT NMP-ES-024-301 S06F1PO005 NRI PT B K 1810.20 ALA1-4502-RC-R220 (W4) WELDED ATTACHMENT NMP-ES-024-301 S06F1PO006 NRI PT C-A 1 1.20 ALA2-3300-6R ELLIPTICAL HEAD TO UPPER SHELL FNP-0-NDE-100.34 S06FlU0042 NRI UT S06F1U0043 NRI NRI NRI AM-3300-8R FEEDWATER NOZZLE TO SHELL NMP-ES-024-401 S06FlM0001 NRI WELD MT FNP-0-NDE-100.34 S06FlM0003 NRI UT S06F1U0023 NRI NRI NRI C-B 12.22 ALA2-3300-IR8R FEEDWATER NOZZLE INNER FNP-0-NDE-100.49 S06F1U0024 NRI RADIUS UT S06F1U0025 NRI NRI NRI NRI Page 2 of 6

Farley Unit 1Refueling Outage 20 Inservice lnspection Report Interval 3, Period 3,1FR20 Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

C-C 13.20 ALA2-4300-MS5-HI 8 (W8) WELDED ATTACHMENT NMP-ES-024-401 S06F1MOO02 NRI MT C-C / 3.20 ALA2-4612-SI-R273 (WS) WELDED ATTACHMENT NMP-ES-024-301 S06F1PO010 NRI PT F-A / 1.10 ALAl-420SRC-H38 SPRING CAN NMP-ES-024-203 S06FlV0012 Sat VT-3 F-A / 1.10 ALA1-4205RGR15 TWO DIRECTIONAL RESTRAINT NMP-ES-024-203 S06FlV0013 Sat VT-3 ALA1-4207-CVCS-R505 SWAY STRUT (2) WlATTACH NMP-ES-024-203 S06FlV0038 Unsat VT-3 SO6FlVOO50 Sat ONE DIRECTIONAL RESTRAINT NMP-ES-024-203 S06FlV0048 Sat WIATTACH VT-3 ANCHOR 2 U-BOLTS NMP-ES-024-203 S06F1V0030 Sat VT-3 SPRING CAN NMP-ES-024-203 S06FlV0025 Sat VT-3 HYDRAULIC SNUBBER Reject Accept F-A/ 1.10 SWAY STRUT (2) WIATTACH Sat F-A/ 1.10 SWAY STRUT Unsat Acceptable by evaluation (See IER #002)

F-A1 1.10 ONE DIRECTIONAL RESTRAINT Sat WIATTACH F-A/ 1.10 ONE DIRECTIONAL RESTRAINT Sat WlATTACH F-A1 1.10 SWAY STRUT Sat F-A 11.10 HYDRAULIC SNUBBER Accept Page 3 of 6

Farley Unit 1Refueling Outage 20 Inservice Inspection Report Interval 3, Period 3,1 FR20 Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

F-A1 1.10 ALA1-4308-SS-1998 TWO DIRECTIONAL RESTRAINT Sat ALA1-4308-SS-2000 ONE DIRECTIONAL RESTRAINT Sat F-A 11.10 ALAl-4500-RC-R1 SPRING CAN (2) Accept ALAl-4502-RC-R220 SPRING CAN WIATTACH NA Sat F-A1l.10 ALAl -4505-88-2009 ONE DIRECTIONAL RESTRAINT Sat F-A1l.10 ALA1-4505-SS-20 17 ANCHOR 2 U-BOLTS Sat F-A1l.10 ALAl -4505-SS-2020 TWO DIRECTIONAL RESTRAINT Sat F-A1 1.10 ALAl -4505-SS-2027 TWO DIRECTIONAL RESTRAINT Sat F-A1 1.10 ALAl-4505-SS-2029 ONE DIRECTIONAL RESTRAINT Sat F-A 1 1.20 ALA2-4300-MS5-H18 SPRING CAN (2) WIATTACH Sat F-A 1 1.20 ALA2-4612-SI-R273 3 DIRECTIONAL RESTRAINT Sat WIATTACH F-A 1 1.40 ALAI -2100-CS-1 PRESSURUER SKIRT QlB31 KO01 Sat R-A1l.ll ALA1-4301-6-RI PIPE TO ELBOW NRI NRI REDUCER TO ELBOW NRI NRI Page 4 of 6

Farley Unit IRefueling Outage 20 Inservice Inspection Report Interval 3, Period 3,lFRZO Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

R-A1 1.11 ALA2-4300-14-RI PIPE TO PENETRATION NMP-ES-024-502 S06F1U0039 RI UT S06F1U0040 NRI NRI R-A 11.1 1 ALA2-4350-25-RI REDUCER TO ELBOW NRI R-A/ 1.11 ALA2-4350-4-RI PIPE TO PENETRATION NRI NRI GEO ALA245 14-30-RI PIPE TO ELBOW NRI ALA2-4514-8-RI PIPE TO TEE NRI ALA2-45 16-28-Rl ELBOW TO PIPE NRI NRI ALA2-4540-1O-RI PIPE TO ELBOW NRI NRI ALA2-4540-32-RI VALVE TO PIPE NRI NRI NRI ALA24540-36-RI ELBOW TO PIPE NRI Page 5 of 6

Farley Unit 1Refueling Outage 20 lnservice Inspection Report Interval 3, Period 3, 1FR20 Exam Cat. Component Component Description Procedure I Method Report No. Results Remarks Item No.

R-A 1 1. I 1 ALA2-4540-36-RI ELBOW TO PIPE NMP-ES-024-501 S05F1U0007 NRI UT R-A 1 1.1 1 VT-2 FOR RISK INFORMED VT-2 OF SMALL BORE LINES OF RI NMP-ES-024-202 SEGMENTS VT-2 R-AI1.11H ALA1-4304-5-RI PIPE TO ELBOW NMP-ES-024-501 S06F1U0031 NRI UT S06F1U0032 NRI ALAI-4305-3-RI PIPE TO ELBOW NRI NRI A M 1-4307-5-Rl ELBOW TO PIPE NRI A M 1 -4310-2-RI PIPE TO ELBOW NRI Page 6 of 6

TAB D Form NIS-2 Owner's Reports for Repairs and Replacements

Class 1 Form NIS-2 Owner's Report for Repairs or Replacements ItType : ~ 1.52 As required by the pronsiolis of the ASME Code Section XI Job Number f I

1. Owner 2. Plant I B13-1051234901 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/27/06
3. Work performed by Type Code Symbol Stamp N iA Name : Southern Nuclear Operating Company Maintenance Dcpartment Authorization Number Address : J o s e ~ hM. Farley Nuclear Plant Expiration Date I

4, Identification of System PIPING & INSTR I(a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19 - 89 Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:

NIA Addenda.

Addenda, N/A Code Case Code Case I

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

HYD.SNUBBER GRlNNELL 12666 N!A FNP-222 I OSO IIEPI,AC'EL) NO HYD.SNUUBER GRINNELL 20732T N!A 10326 1083 IIIiI'i..f\C'EMEN~l~ NC)

7. Description of Work REPLACEMENT SNUBBER RCR226 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NliMBEK ')0)47 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI 'Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Sectlon XI Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I B13-1051234901 Sheet 2 of 2 SUPPORTS BlJll,'S TO AISC-1969 AND WEL.DED TO AWS Dl 1-86 Certificate of Compliance We certify that the statements made in the report are corrcct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A 1

Certificate of Authorization Numbcr N/A Expiration Date N/A Signed Maintenance Manager Datc 7//9/d 6' Owner or Owner's Desimee. Titlc I I, the undersigned, holding a Certificate of Inservice Inspection commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by fl5 of have inspected the components described

-ngir the period ,-6 to to the best of my knowledge and belief, the Owner has &-formedexamination Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing <his certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the ~nspectornor his eniployer shall be liable in any manner for any personal in-jury or property damage or loss of any kind arising from or connected with this inspection.

Commissions R/ f K 7 AN/ /

National Board, State, Piovince. and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RTYF :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I I

1. Owner 2. Plant I B13-1051238601 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/27/06
3. Work performed by Name : Southern Nuclear Owratine Corn~anvMllinlenance Department I Type Code Symbol Stamp Authorization Number N/A Address : Joseph M. Farlev Nuclear Plant Expiration Date I
4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section Xi Utilized For Repairs Or Replacements, 19 89 Edition NIA Addenda, N/A Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

MECH PACLFIC 26139 N/A QP-1301 1982 REPLACED NO SNUBBER SCIENTIFIC HYD SNUBBEK LISEGA 30500420/011 NIA QP050939 2004 REPLACEMENT NO

7. Description of Work SNUBBER SS-2744 WAS REPLACED AS A SCHEDULED UPGRADE. REF: TRANSACTION NUMBER 90886 VT-3 PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted I Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number B13-1051238601 Sheet 2 of 2

9. Remarks (Applicable lbfanufacturer's Data Reports to be attached)

SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl .I-86.

REFERENCE EQUIVALENCY DETERMINATION (LED) 96-04225. REV. I Certificate of Compliance We certify that the statements made in the report are correct and this replacemcnl conforms to the rules of the ASME Code.Section XI. repair or replaccment Type Code Symbol Stamp NI A 1 Certiiica? of Authorization Kumber KIA Expiration Date NIA 1 Signed Owner or Owner's Designee, Titlc Maintenance Manager Date 7 f YI~' 6 Certificate of Inservice Inspection I, the undersigned, holdin alid commission issued by the National Board of Boiler and Pressurc Vessel lnspcctors and the State or Province of and employed by n'Sk5-c~ of

&.ART- , 6.7- have inspected thc components described in this Owner's Report during rhe period p/ 6 to @ , -6 , and state that to thc best of my knowledge and belief, the Owner has &rformcd examinations c o d c t i v e measurcs described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning thc examinations and corrective rneasures described in this Owner's Report. Furtherrnorc, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damagc or loss of any kind arising from or connected with this inspection.

Cvmrnissions AN//

National Board, stalk, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number I I I I 831 - 1041974401 Sheet 1 of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I L

Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

June 1,2006 I

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear opera tin^ Comaany Maintenance De~artment NIA Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A I
4. Identification of System Pressuriz,er System I (a) Applicable Construction Code: ASME Section 111, (b) Applicable Section XI Utilized For Repairs Or Replacements,

/-

19 19

- 71 Edition 89 Edition

6. Identification of Components Repaired o r Replaced end Replacement Components:

Winter 1972 N/A Addenda.

Addenda, / A Code Case Code Case I

8. Test Conducted I 1 Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature OF I

Form NIS-2 Owner's Report for Repairs or Replacements WType : L1.52 As required by the provisions of the ASME Code Section XI Job Kumber 8 3 1 - 1041974401 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

While the replacement valve was at Wyle for testing/rcfurbishment under PO QP030376, the following new pans were installed:

, NOZZLE - Scrial Number N94628-36-0012. Purchase Order OP040833 DISC INSERT - Serial Number N9.1630-34-0008. Purchase Order 0P970663 Certificate of Compliance We ccrtify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Codc.Section XI. repair or replacement Type Code Symbol Stamp NiA Certificate of Aothori7ation Number NIA Expiration Date NIA Signed Maintenance Manager Date 7t 7 / 6 6 Owner or Owner's Designee. Titlc Certificate of Inservice Inspection I, the undersigned, hold a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of / and employed by #dB CT of d - - . - have inspected the components described in this E Z R z t d m e period -04 to @ ~ / 3 , 2 0 0 6 , and state that to the best of my knowledge and belief, t h e - O e i i e r f o r r n e d examinations and tagen cofrective measurer desiribed in this Owner's Report in accordance with the requirements of the ASME Codc,Section XI.

By signing this certificate neither the Inspcctor nor his crnployer makes any warranty, expressed or implied, concerning the examinations and corrcctive measurcs described i n this Owner's Report. Furthcrrnore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

~ornmissions E/ 6T7 @//

National Board, State, Province, and Endorsemenls

Form NIS-2 Owner's Report for Repairs or Replacements ItTyl~e: ~ 1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I 1

1. Owner 2. Plant I Ell-1051234801 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/06
3. Work performed by Type Code Symbol Stamp N/A Name : S o u t h e r n a i n t e u e ~ n r t m e n t

~ p./p, Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A

4. Identification of System RHR/LOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:

1 6.

SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19

- Edition Edition Identification of Components Repaired o r Replaced and Replacement Components:

N/A Addenda.

Addenda, Code Case Code Cast I

I Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identitication Built Replaced, o r Code No. Replacement Stamped (Yes / Yo)

BYD SNUDUhR GRINNF1,L 12 153 NI A TNP-222 1977 ILLI'LAC I I> NO HYD SNUBBER GRINNELL 17009 NIA FNP-222 1077 I2FI'LAC E M E N T N0

7. Description of Work REPLACEMENT SNUBBER RHRRIOI WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER 90033 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted Hydrostatic Pneumntlc Normal Operating Pressure None (XI Other I Pressure PSI Temperature OF I

Form NIS-2 Owner's Report for Repairs or Replacements itrypr : ~ 1.52 As required by the provisions of the ASME Codc Section XI . Job Number Sheet 2 of 2 E l 1-1051234801

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SlJPPORTS RU[LT 1'0 AISC-1969 AND WELDED TO AWS 131 1-86, Certificate of Compliance We certify that the statements made in the report are correct and this replacement co~~forms to the rulcs of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NI A Certificate of Authorization Numbcr NIA Expirat~onDate N!A Signed i.' &&-A+Owner or Owner's Desiencc. TitleMaintenance Manager Date 7( (Y d L II, the undersigned, holding Certificate of Inservice Inspection alid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by ,+ear of h&TF&%' 0 have inspected the components described in this Owner's Report during t h h m to v / 9 , -6 , and state that to the best of my knowledge and belief, the 0&er has p'erformed e x a m i n a t i o n s a n h n corfective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his einployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Fulthermore, neither the Inspector nor his enlployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected \\;it11 this inspection.

Cornn-iissions &W M/I National Board, State, Province, and Endorsements Date S&'L.~//~,W&

/ '1

Form NIS-2 Owner's Report for Repairs or Replacements KTYPC : ~ 1.52 As required by the provisions of the ASME Code Section Xi Job Number Ell-1051235101 Sheet I of' 2

2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 01!2Gi06 I
3. W o r k performed by Type Code Symbol Stamp NiA N a m e : Southern Nuclear Operating Companv Maintenance Department Authorization Number NiA Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A
4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 -89 Edition N/A Addenda, NfA Code Case
6. Identification of Coniponents Repaired o r Replaced and Replacement Components:

Name of Manufacturer National Other Year Repaired, ASME I

Name of Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

HYII SNUBBER GRlNNELL 12154 X A FNP 222 1977 KLI'LAC'I I) NO 1IYD SNUBBER GRINNELL 13592 N 'A FNP-222 1977 REPLA("EMIIYT YO

7. Description of Work I REPLACEMENT SNUBBER RHRRI 05 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER 89942 I

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature O F I

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Sect~onXI Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I Ell-1051235101 Sheet 2 of 2 SUPPORTS BUI1,T TO AISC-1969 A N D WELDED 1'0AWS 131.1-86, Certificate of Compliance We certify that the statcrnents made in the report are correct and th~s replacement confoi-msto the rules of the ASME Code,Section XI. repair or replacenlent Type Code Symbol Stamp NIA Certificate of Authorization Number NIA Expiration Date Signed Maintenance Manager Date Owner or Owner's Desienee. Title Certificate of Inservice Inspection I, the undersigned, hoIding mmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described riod 21, W L ; to /9, , and state that to the best of my knowledge and belief, the Owner has p6rformed examinations and S r r e d v e measures described in this Owner's Report in accordance with the requii-enlentsof the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceining the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property danmge or loss of any kind arising from or connected with tllis inspection.

~ornrn~ssions ,&' /fh4!

National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements mypc  : L1.52 As required by thc prov~sionsof the ASME Code Sect~onXI Job Number I I

1. Owner 2. Plant I El 1-1051235301 Sheet Unit i of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Con~pany) 04/26/06 I
3. Work performed by Type Code Symbol Stamp

&/A Name : Southern Nuclear Operating Companv Maintenance Deuartment Address : Joseph M. Farlev Nuclear Plant Expiration Date N!A I 4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs 01.Replacements, I9 89 Edition N/A Addenda. NIA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Manufacturer National Other Year Repaired, ASME b

Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Staniped (Yes / Yo) tIYD SNUBBER GRINNELL 12151 NIA FNP-222 1977 Rt-PI-AC'l-1) NO iIYD SNUBBER GRINNELL 12673 NA 20825 1'183 I2l-PL.A< kMCNT \O

7. Description of Work REPLACEMENT SNUBBER RHRR99A WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBhR 904(,2 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted rn Hydrostatic rn Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements HT?PC : ~ 1 . 5 2 As required by the provisions of the ASME Codc Section Xi Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E l 1-1051235301 Sheet 2 of 2

, SUPPORTS BUII<TTO AISC-1969 AND WPl.DEII7'0 AWS D l . 1-86, Certificate of Compliance We certify that the statements made in the report arc correct and this replacemcnt conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NIA

( Certificate of Authorization Number NI A Expiration Date NIA I I Signed Owner or Owner's Designee, Title Maintenance Manager Date  ?//dd Certificate of Inservice Inspection I, the undersigned, holding a valid commissioli issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of # 5 ~ T- c of have inspected the components described in this Owner's Report during the period / to czXh'Z/,-L ,and state that to the best of my knowledge and belief, t h e a a s per$ormrd examinations and d e n corfective measures described in this Owner's ~ e ~ oinl accordance t with the requirements of the ASME Code,Section XI By signing this certificate neither the Inspector nor his employer makes any wan-anty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employes shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Co~nm~ss~ons &/8f7 ,&//

Nat~onalBoard, State, Provmcc, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements IlTypr :~ 1.52 As required by the provisions of the ASME Code Section XI Job Number I 1

1. Owner 2. Plant I E21-1051227401 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/06
3. Work perrormed by Type Code Symbol Stamp N/A Name : Southern Nuclear Oueratine Company Maintenance Deoartment Authorization Number N/ A Address : Joseph M. Parlev Nuclear Plant Expiration Date 1 I
4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM (a) Applicable Construction Code:

1 6.

SEE NOTE (b) Applicable Scction XI Utilized For Rcpairs Or Replacements, 19 19

- Edition

-89 Edition Identification of Components Repaired or Replaced and Replacement Components:

NIA Addenda, Addenda, N!A Code Case C'ode Casc I

I Name of Name of Manufacturer Wational Other Year Repaired, AS &I E Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

I-IY D.SNUf3BER GRINNELI, 12125 N;A FNP-222 1'177 KEPI..AC'ED NO HYD.SNUBBER GRINNELL 13925 NIA 20825 108.3 RHI'I.AC'EMENT NO

7. Description of Work REPLACEMENT SNUBBER CVCSR526 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. 'Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None (XJ Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements 1l.r),W : I>I 5 2 As required by the provis~onsof the ASME Code Sect~onXI Job Kumber I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051227401 Sheet 2 of 2 SUPPORTS 81131.1 TO AISC-1969 AND WEI,I>ED AWS 11 t t-86.

I Certificate of Compliance We certify that the statements ~iiadein the report ere correct and th~s replacement confor~nsto the rules of the I

ASME Code, Scction XI. repair or replacement Type Code Symbol Stamp Nl A 1

I Certificate of Authorization Number NIA Expiration Date 7i NJA Signed Maintenance Manager Date tyfb6 Owner or Owner's Desinee. Title Certificate of lnsewice Inspection I, the undersigned, holding a v lid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of b and employed by

~7

&A=?-

have inspected the components described of in this Owner's Report during the period 2/ %h 6 to A y A ' , M O L , and state that to the best of my knowledge and belief, the Owner has$erformed examinations and taken &o~recdvemeasures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concer~lingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Comni~ssions rQ/ fT7 f l Inspector's Signature National Board, State, Prov~nce,and Endorsements Date ~qzi&/ >/, h 9 d . G

/

Form NIS-2 Owner's Report for Repairs or Replacements I ~ :~ T1 . 5~2 ~ ~

As requ~redby the provisions ofthe ASME Code Sect1011XI Job Number E21-1051228001 Sheet I of 3

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FhP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04,26100
3. Work performed by Type Code Symbol Stamp Nl.4 Name : Soutllern Nuclear Operatine Companv Maintenance Department 1

NIA Address : Joseph M. Farlev Nuclear Plant Expiration Date NlrZ

4. Identification of System HIGH HEAD SAFETY IKJECTION/CVCS SYSTEM I -

I (a) Applicable Construction Code: SEE NOTE 19 Edition Addenda, <:ode Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - 89 Edition N /A Addenda, NiA Code C:ase

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

HY DSNUBBER GRINNELI. 22386 N/II FNP2-20 1981 IIEI'LACED N0 HYD.SNUUBER GRINNELL 17387 N!A 20825 REPI-AC'EMENT NO

7. Description of Work REPLACEMENT SNUBBER CVCSR496 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION N U M B E R 1)001S VT-3 WAS PERFORMED ON REPLACEMEN'I' SNUBBER.

. Test Conducted Hydrostatic [3 Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051228001 Sheet 2 of 2 SUPPORTS BlJlLT TO AISC-1969 AND WELDED TO AWS D l . 1-86, I

Certificate of Compliance We certify that the statements made in the report are correct and this replacement - confor~nsto the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/ A I Certificate of Authorization Number N/A Expiration Date N/A I I Signed Owner or Owner's Desienee. Title Maintenance Manager Date 7 fly/ 6 6 Certificate of Inservice Inspection I, the undersigned, holdin alid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of and employed by # W C ~ o i' have inspected the components described in this Owne'r's Report durfng the period &&, ;2/ , -06 to wqd&=, W G , and state that to the best of my knowledge and belief, the Owner has pdrformed examinations and tak corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer sllal l be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

~ornrnissions A/ 867 AN/

Inspector's Signature National ~oard,'State: Province, and Endorscmenrs Date &-&Lv /

%, 2W6

Form NIS-2 Owner's Report for Repairs or Replacements llType : ~ 1 . 5 2 A s required by the provisions of the ASME Code Section XI Job Number I I

1. Owner 2. Plant I E21-1051228601 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

I

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Companv Maintenance Department

(

N: A Address : Joseph M. Farley Nuclear Plant Expiration Date NIA

4. Identification of System HIGH HEAD SAFETY IhTJECTIONICVCS SYSTEM I (a) Applicable Constructiofi Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, I9 19

- Edition

-89 Edition

6. Identification of Components Repaired o r Replaced and Replacement Components:

N/A Addenda, Addenda, NfA Code Case Code Casc I

Name of Name of hlanufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes I No)

HYD SNUBBER GRINNELL 12662 NA FNP-222 1077 l i l P I ACED NO NYD SNUBBER GRINNELL 11013 Y /A 20825 1983 KEPL9CL MI-N I NO

7. Description of Work REPLACEMENT SNUBBER CVCSR5 I5 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE REF TRANSACIION NUMBER 90764 VT-3 WAS PERFORMED O N REPLACEMENT SNUBBER

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RT?.PC : L1.52 As required by the provisions of the ASME Code Sectio~iXI Job Number I I 8 9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051228601 Sheet 2 of 2 SUPPORTS BlJlLT 1'0AISC-1969 AND WELDED '1.0AWS Dl.!-86 Certificate of Compliance We certify that the statements made in the report arc correct and th~s replacement conforms ro thc rules of the ASME Code,Section XI reparr or replacement Type Code Symbol Stamp N/A Certificate of Authorization Number N/A Expiration Date N/A Signed

& Maintenance Manager Dote Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding alid co~nmissionissued by the Nat~onalBoard of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by /&& c/- of have inspected the components described L to 7

W6 , and state that to the best of my knowledge and belief, t h e - O ~ a s ~ d ~ o ~ e x a m i n a t i o a n sd < ~ z ~ 3 t i vmeasures e described in this Owner's ~ e ~ oin ;accordance with the reqwements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising froin or connected with this inspection.

Commissions kd//

National ~ o a r dState,

, Province, and Endorsenlents Date gdL+ /?,

/

Form NIS-2 Owner's Report for Repairs or Replacements ~ ~ y : p~ 1 e .52 As required by the provisions of the ASME Codc Section XI Job Number I I

1. Owner 2. Plant I E21-1051229001 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 05/02/06
3. Work performed by Type Code Symbol Stamp N/ A Name : Southern Nuclear Operating Company Maintenance Department Authorization Number Address : Joseph M. Farley Nuclear Plant Expiration Date
4. Identification of System HIGH HEAD S A F E T Y INJECTION/CVCS S Y S T E M (a) Applicable Construction Code: SEE N O T E 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NI A Addenda, NIA Code Case
6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manulacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

NYD SNUBBER GRINNELL 12094 h:A FNP-222 1977 KbI'l ACFD NO HYD SNUBBER GRINNELL 1 1720 NI 4 20825 1083 K l P I r\C I klL-Y I XO

7. Description of Work REPLACEMENT SNUBBER CVCSR517 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRAhSACTION NCMBER ')0762 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted Hydrostatic 0Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements I X T ~ ~ :C~ 1.52 As required by the provisions of the ASMECodc section XI Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051229001 Sheet 2 ot' 7 SLJPPORTS BUILT TO AISC-1969A N D WELDED TO A W S D l . 1-86, I Certificate of Compliance We certify that the statements made ~nthe report ore correct and thrs replacement conforms to the ~ulesof'thc I

ASME Code,Section XI repalr or replacement Type Code Symbol Stamp N/A ICertificate or Authorization Number NIA Expiration Date N/A I I Signed fat&--

Owner or Owner's Desienee. Title Maintenance Manager Date 7/lyl ' 1 I Certificate of Inservice Inspection I, the undersigned, holding a valid cornmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by #sBc~'- of have inspected the components described in this Owner's Report W d L , and state that to the best of my know ctive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descr~bedin this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal i n j u ~y or property danmge or loss of any kind arising from or connected with this inspection.

Cammissions A/ fY7 &~II National ~ o a r d , ' ~ t a tProv~nce,

< and Endorsements Date d-~vw,m G

/ ,'

Form NIS-2 Owner's Report for Repairs or Replacements ~ r r ~ :p1~1.52 c

A s requlrcd by the provisrons of the ASME Code S e c t ~ o nXi Job Number I I

1. Owner 2. Plant I E21-1051237001 Sheet Unit I of 2 Southern Nuclear Operating Company Parley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04;26!06
3. Work performed by Type Code Symbol Stanip N/A Name : Southern Nuclear Operating Companv Maintenance Department NiA Address : Joseph M. Farlev Nuclear Plant NiA
4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM II 5.

(a) Applicable Construction Code: SEE NOTE I0 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs 01.Rcplacemcnts, 19 -89 Edition NIA Addenda, NIA Code Case

6. Identification of Conlponents Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code

Yo. Replacement Stamped (Yes 1 No)

LOAD STUD UNK 1 INK N:4 FNP-222 1977 Ktl'L.AC'ED N()

NUT L O A D STUD MACKSON M82491 N/A QP040363 2004 REPLACEMENT NO NUT

7. Description of Work LOAD STUD NUT WAS DAMAGED DURING REMOVAL. REPLACED N U T WITH NEW NUT. REF: TRANSACTION NUMBER 9 1206.

. Test Conducted 0Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature "F I

Form NIS-2 Owner's Report for Repairs or Replacements [<Type: 1~1.52 As requ~redby the provlslons of the ASME Code Section XI Job Number

  • 9. Remarks (Applicable Manufacturer's Data Reports to be attached)

E21-1051237001 Sheet 2 of 2 D W W E D TO A W S Dl-1-86. MATERIAI. I'OU ATTACHED DOCUMENT.

I Certificate of Compliance I

I Certificate of Authorization Number N/A Expiration Date N/A I I Signed e;r Maintenance Manager Owner or Owner's Designee. Title Date 7[f$/ D d I

I Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of El and employed by &BCT of

&$ffle&&) , cr have inspected the components described in this Owner's Report during de period #/2/~ mf, to 19,-c , and state that to the best of my knowledge and belief, the 0&ner has pe&nned ezamination rreftive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enlployer sl~all be liable in any manner for any personal injury or property damage or loss of any kind arising from or coll~lectedwith this inspection.

Comnlissions &PO National Board. Stat4 Province, and Endorsements Date =M/ /9, a0 C

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI

) Job Number 1 I

1. Owner 2. Plant I E21-1051237801 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 lnvemess Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 0411 7/06 I

I I

3. Work performed by Type Code Symbol Stamp N/ A Name t: /

ODerating Authorhation NI A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A

4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM 5.

(a) Applicable Construction Code. SEE NOTE 19 - Edltion Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edttion N/A Addenda, NlA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (YesI No)

MECH PACIFIC 26150 NIA QP-1301 1982 REPLACED NO SNUBBER SCiENTlFlC HYD SNUBBER LlSEGA 30500420/014 KIA QP050939 2004 =PLACEMENT NO

7. Description of Work SNUBBER SS-4301 WAS REPLACED AS A SCHEDULED UPGRADE REF: TRANSACTION NUMBER 87825 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic Normal Operating Pressure None [XI Other I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements IXTYPC: L 1.52 As required by the provis~onsof the PISME Codc Section XI Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051237801 Sheet 2 of 2 SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl 1-80 REFERENCE EQUIVALENCY DETERMINATION ( I ED) 96-0-0225 REV 1 I Wc certify that the Certificate of Compliance statements made in the report are correct and this replacement conforms to the rules ol'the I

ASME Code,Section XI. repalr or replacement Type Code Symbol Stamp N/ A Cert~ficateof Author~zat~on Number NIA Exp~rat~onDate S~gned C?&&/- Owner or Ownel's Des~gnee,Title Marntenance Manager Date Certificate of Inservice Inspection I, the undersigned, holding lid commission issued by the National Board of*Boiler and Pressure Vessel Inspectors and the State or Province of and employed by ,&we'- of

/f"rZ , have inspected the components described in this Owner's Report during the$eriod sf'.ZooC; to =LV~W,-~ , and state that to the best of my knowledge and belief, the Owner has p!rformed examinations and atkenb-ried in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Lnspector nor his employer makes any warranty, expressed or implied, concelning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any inanner for any personal injury or property damage or loss of any kmd arising from or connected with this inspection.

Commissions 2 / Kg7 Mspector's Signature National Board, st&, ~rbvince,and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code Section XI 1 Job Number I 1. Owner 12. Plant I E21-1051238001 Sheet I of 2 I Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I I Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company)

I

3. Work performed by Type Code Symbol Stamp N lA Name : Southern Nuclear Operatine Company Maintenance De~artment Address : J o s e ~ hM. Farlev Nuclear Plant XI A I
4. Identification of System RHRnOW HEAD SAFETY INJECTION SYSTEM 5.

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda. Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 & Edition N/A Addenda, N/A Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification BuiIt Replaced, o r Code No. Replacement Stamped (Yes/ No)

MECH. PACFIC 33519 N/A QP- 1299 1981 REPLACED NO SNUBBER SCIENTIFIC HYD SNUBBER LISEGA 30500420/047 N/A QP050939 2004 KEPLACEMth'T NO

7. Description of Work SNUBBER SS-4162A WAS REPLACED AS A SCHEDULED UPGRADE. REF: TRANSACTION NUMBER 87827 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic C] Normal Operating Pressure None Other I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements HTvpe : L 1.52 As required by the provisions of the A ~ M CodeE Section X1 1 Job Number 1 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051238001 Sheet 2 of 2 1

r-1969AND W w ' i fAWS1 I-Xh I

REFERENCE EQUIVALENCY DETERMINATION ( E D ) 76-0-0225 REV I I

I Certificate of Compliance We certify that the statements made in the repolt are correct and this replacement repair or replacement conforms to the rules of the I

ASME Code,Section XI.

Type Code Symbol Stanip NIA Certificate of Authorization Number N/A Expiratcon Date w'

Signed Maintenance Manager Date Owner or Owner's Designee. Title II, the undersigned, holding Certificate of Inservice Inspection ssure Vessel Inspectors and the State I

or Province of of have ~nspectedthe compoilents described Z o o .6 , and state that ective measures described in this Owner's Repol-t in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liabIe in any nlanner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Coliini~sslons National Board,'State, Prov~nce,and Endorsements 1 Date

Form NIS-2 Owner's Report for Repairs or Replacements H T : L1.52

~ ~ ~

As required by the provisions of the ASME Code Section XI I Job Number I I 1 1. Owner 12. Plant I E21-1051238201 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company I

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Operatine Company Maintenance Department Authorization Number Address : Joser~hM. Farlev Nuclear Plant Expiration Date I 4. ~dentificationof System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utiii7xd For Repairs Or Replacements, 19 19

- Edition

-89 Edition N/A Addenda.

Addenda, N/A Code Case Code Case I 6, Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

MECH PACIFIC 34958 N/A QP-1299 1983 REPLACED NO SNUBBER SC[ENTlFIC HYD SNUBBER LISEGA 30500420/016 NIA QP050939 2004 REPLACEMENT NO

7. Description of Work SNUBBER SS-4152 WAS REPLACED AS A SCHEDULED UPGRADE. REF. TRANSACTION NUMBER 90895 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions or the ASME Code Section XI

) Job Number I 1

9. Remarks (ApplicableManufacturer's Data Reports to be attached)

I E21-1051238201 Sheet 2 of 2 SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl 1-86 REFERENCE EQUIVALENCY DETERMINATION (LED) 96-0-027-5. REV. 1 Certificate of Compliance We cenify that the statements made in the report are correct and this replacement conforms to thc rules or the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N/A -

Certificate of Authori~ationNumber N/A Expiration Date KIA Signed r~~ &L Maintenance Manager Date 7 I'Y/~ 6 Owner or Owncr's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of k/ and employed by &SBC/- of

> C i r ' have inspected the components described dng the period -&+, ~6 to to the best of my knowledge and belief, the Owner h6s performed cxarnination Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Tnspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his crnployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions R/ f l 7 //

National Boarh: State: Province, and Endorsements Date rhbr/ w,

Class 2 Form NIS-2 Owner's Report for Repairs or Replacements WTYP:L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051229601 Sheet 1 of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Fl\jp 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/27/06
3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear opera tin^ Company Maintenance Department Authorization Number N/A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A
4. Identification of System RHRLOW HEAD SAFETY INJECTION SYSTEM 5.

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilizcd For Repairs Or Replacements. 19 89 Edition N/ A Addenda, N/A Code Case I

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

HYD.SNUBBER GKINNELL 14750 N/A MP-222 1977 KEPLACED NO HYII.SNUBHER GRINNELL 19516 N/A 20825 1983 REPLACEMENT NO

7. Description of Work REPLACEMENT SNUBBER RHRR98XA WAS REBUlLT PRE-OUTAGE TO MEET SCHEDULE REFERENCE TRANSACTION NUMBER 003 t VT-3 COMPLETED AFTER SNUBBER WAS KEPLACED
8. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051229601 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

NOTE: SUPPORTS ARE DESIGNED TO AISC- 1969 AND WELISED TO AWS D1.l 4

Certificate of Compliance We cer~ifythal the statcmen~smade in thc report are correcl and this replacement cvnforms lo the rules of the ASME Code,Section XI. repair or rcplacement Type Code Symbol Stamp N/A Certificate oi Authorizalion Number - N/A Expiration Date NIA Signed @ (

7- Owner or Owner's Desicnee. Title Maintenance Managcr te 7 lfv/d 6 1 Certificate of Inservice Inspection I, the undersigned, holding alid commission issued by the National Board of Boilcr and Pressure Vessel Inspectors and thc State or Province of and cmployed by HSBCT of have inspected the cornponcnts described in this Owner's Report during thkperiod a, 21 . -6 to v=. ZQB 6 to the best of my knowledge and belief, the Owner has firformed examinations and takendorrectiGc measures described in this

, and state that Owner's Report in accordance with the recluircments of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinalions and corrective measures described in this Owner's Report. Furtherrnorc, neither thc Inspector nor his ciPloyer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions kkKJ'7 fiRI//

National Hoard, State, Province, and Endorsements 1 Date

Form NIS-2 Owner's Report for Repairs or Replacements Rl.ype : ~ 1.52 A s required by thc provisions o f the ASME Code section XI

) Job Number I I

1. Owner 2. Plant I Ell-1051230401 Sheet I Unit of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/06
3. Work performed by Type Code Symbol Stamp Kt'A I

Name : Southern Nuclear Overstine Companv Maintenance Department N!A I

I Address :

4. Identification of System Joseph M. Farlev Nuclear Plant I

Expiration Date N /A RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code SEE NOTE (b) Applicable Scctlon XI Ut~llzedFor Repalrs Or Replacements, 19 19

-Ed~t~on

-89 Edlt~on

6. Identification of Components Repaired or Replaced and Replacement Components:

NI A Addenda, Addenda, N/A Code Case Code Case I

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replaceme~~t Stamped (Yes I No)

HYDSNUBBER GRINNELL 12028 N.'A FNPZZZ 1977 REPLACED NO HYD.SNUBBER GRINNELI. 11748 N ;A FNP222 1977 REPl..ACIEMENT N0

7. Description of Work REPLACEMENT SNUBBER RHRGRG7B WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER ')0067 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. Test Conductetl fl None W Other I Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure "F

Form NIS-2 Owner's Report for Repairs or Replacements -

HType : L1.52 As required by the provisions of the ASME Codc section XI Job Number I i

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I El 1-1051230401 Sheet 2 of 2 I,'rTO

- A. - . .. ..10 AWS Aws1.1-86.

I Certificate of Compliance I

dI We certify that the statemcnts made in the report are correct and this replacement confol-ms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NI A M

Certificate of Authorization Number NI A Exp~rat~on Date NIA I I signedfi

- Owner or Owner's Designee. TitleMaintenance Manager Date 711%/a 6 Certificate of Inservice Inspection I'ressure Vessel Inspectors and the State JJd8c of have inspected the components described to w, a d 6 , and state that to the best of my knowledge and belief, the Owner has #rformed examinations i ~ e d i v emeasures described in this Owner's R e ~ o rin t accordance with the resuirements of the ASME Code.Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concen11ng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his en~ployershall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this 1 inspection.

comm~ss~ons & 88 7 M//

National Boara, State, Prov~nce.and Endorscrnents

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I I

12. Plant I E11-1051230501 Sbeet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company)

I

3. Work performed by Type Code Symbol Stamp NI A Name : Southern Nuclear Operating Cornuanv Maintenance Department Authorization Number NIA Address : Joseph M. Farfey Nuclear Plant Expiration Date NI A
4. Identification of System RHWLOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 I9

- Edition 89 Edition

6. Identification of Components Repaired o r Replaced and Replacement Components:

N/A Addenda, Addenda, N/A Code Case Code Casc II Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

HYD SNUBBER GRJNNELL l266l hlA TNP-222 1977 IIt PLAC Ell NO HYD SNUBBER GRTNNELL I5519 N'A FNP-222 1977 REPLACtM E N

I NO
7. Description of Work REPLACEMENT SNUBBER SIR106 WAS REBUILT PRE-OUTAGE 7 0 MEET SCHEDULE REF TRANSAC rION NUMBER 8903!,

VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other 1 Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements KTYPC : L1.52 Certificate of Compliance We cert~fythat thc staterncnts made In the report arc correct and th~s replacement conforn~sto the rules of thc ASME Code, Sect~onXI. repair or replacement Type Code Synlbol Stamp N/A Certificate of Authorization Number NIA Expiration Date NiA Signed fl 4'0- Maintenance Manager Datc i ) / ~0g 6 Owner or Owner's Designee. Titlc I

I 1 or Province of R/

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the Natlonal Board of BoiIer and Pressui-e Vessel Inspectors and the State and employed by ffsSc7- of have inspected the components described

, and state that rrectid measures described in this Owner's Report in accordance with the req~tiren~ents of the ASlME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or corlnected with this inspection.

w t b r ' s s~gnature Nat~onalBoard, State, Province, and~ndorscnicnrs

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051231201 Sheet 1 of 2 I

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/27/06
3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear O~eratineCompany Maintenance Department p

NIA Address : Joseph M. Farlev Nuclear Plant Expiration Date NIA

4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM 5.

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NIA Addenda, N/A Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes 1 No)

HYD. SNUBBER GRINNELL 9876 NIA MP-222 1977 REPLACED NO HYDSNUBBER GR INNELL 15529 NIA FNP 2-29 1981 REPLACEMENT NO

7. Description of Work REPLACEMENT SNUBBER RHK6R58 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER ON REPLACEMENT SNUBBER Hydrostatic Pneumatic 0 Normal Operating Pressure None Other Prmure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements ~ y p :eL152 As required by the provisions of the ASME Code Section XI 1 Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I Ell-1051231201 Sheet 2 of 2 SUPPORTS DESIGNED TO AICS- 1969 AND WELDED TO AWS D l . 1-86.

~ Certificate of Compliance We certify that the statements made i n the report are correct and this ASME Code,Section XI.

Type Code Symbol Stamp Certificate of Authori~alionNumber N/ A replacement repair or replacement A

- Expiration a t conforms to the rules of the NIA I1 Signed Maintenance Manager Date 7 / ' ~ '/ '

Owner or Owner's Designee, Title Certificate of Inservice Inspection I, thc undersigned. holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stale or Province of &I and employed by ,+&- of have inspected the components described W6 to # ,280L ,and state that to the her1 of my knowledge and belief. t h e e h z i e r f o r m e d examiKations a n d Z e h c!f:vite measurer described in this Owner's Report in accordance wiih the rcquiremcnts of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected wilh this inspection.

~omrnissions /$' Rr7 /1 National Board, Sdte, ~;o;ince, and Endorsements Date 'S'%W/S. m&

Form NIS-2 Owner's Report for Repairs or Replacements R T Y W : L 1.52 As required by the provis~onsof the ASME Code Sect~onX1 Job Number I 1

1. Owner 2. Plant I Ell-1051232101 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Coluntbia, Alabama 3631 9 Date (as agent for Alabama Power Company) 04/26/00
3. Work performed by Type Code Symbol Stamp Ni.4 Name : Southern Nuclear Operatine Companv Maintenance Department

)

N iA Address : Joseph M. Farley Kuclear Plant Expiration Date NIA I

4. Identification of System RHRiLOW HEAD SAFETY INJECTION I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19

- Edition 89 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

N/A Addcnda, Addenda, KfA Code Case Code Case II Name oi Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes / No)

HYI) SNUBBER GRINNhLL h969 NA FNP-222 1077 l<t 1'1 I\( tC) \O klYD SNUBBbR GRlNkELt 11751 NA 20825 I IICPLAC LML N1 20

7. Description of Work REPLACEMEN r SNUBBER RHRIOR29 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER 90353 VT-3 WAS PERFORMED ON REPLACEMENT SY UBBER

. Test Conducted Hydrostatic Pressure 0 Pneumatic PSI hormal Operating Pressure Temperature O F None a Other

Form NIS-2 Owner's Report for Repairs or Replacements RTypr : L1.52 As required by the provisions of the ASME Codc Section XI Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I Ell-1051232101 Sheet 2 of 2

, SUPPOR'TS BlIIL7' 7'0AISC-1969 AND WELDED TO AWS 111.1-86.

Certificate of Compliance We certify that the statements made in the report arc correct and this replacement conforms to the rules of [he ASME Code,Section XI. repair or replacement Type Codc Symbol Stamp NIA Certificate of Authorization Number NIA Expiration Date N 1.4 Signed

& fl- Maintenance Manager Date Owner or Owner's Designee, Title Certificate of lnservice Inspection or Province of d/

I, the undersigned, holding a v id commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State and employed by ,&sBC  ?-

have inspected the components described of d& , and state that tive measures described in this Owner's Report in accordance with the requirements of the AS,ME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inylied, concet-i~ingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Con~~nissions PI C 7 //

National Board, State, ~rdvince,and Endorsements Date m&Lf

/

Form NIS-2 Owner's Report for Repairs or Replacements - . . :~ 1 . 5 2 KTYVE As required by thc provisions of the ASME Code section XI Job Number I 1

1. Owner 2. Plant I El 1-1051232201 Sl~eet I Unit of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 0-1 25 00
3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Companv Maintenance Department Authorization Number N/4 Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A I 4. Identification of System RHRILOW HEAD SAFETY INJECTION (a) Applicable Construction Code: SEE NOTE I9 - Edition Addenda, C'odc Cast

@) Applicable Section XI Utilized For Repairs 01.Replacements. 19 - 89 Edition N/A Addenda, NfA Codc Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

HYD.SNUDDER GRINNELI, 8686 N,'A FNI'-222 1977 REI'I-ACED NO HYDSNUBBER GRINNELL 24 183 NiA FNP2-29 1'181 ICEPI.A('EMEN7 NO

7. Description of Work REPLACEMENT SNUBBER RHRI OR46 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE REF: TRANSACTION NtiMBER 90(327 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI 'rempernture "F

Form NIS-2 Owner's Report for Repairs or Replacements - IZTypc : ~ 1.52 As required by the provis~onsof the ASMECodc section XI Job Number E l 1-1051232201 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SUPPORTS BUILT TO AISC-1969 AND WELDEII '1'0AWS D 1.1-86.

Certificate of Compliance We certify that the statements made in rhc report are correct and this replacement conrorms to rhc r~llesof the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NI A Certificate of Author~zationNumber NIA Exp~rationDate - NIA Signed

& ,gL& Maintenance Manager Date 7/1% / J L Owner or Owner's Desienee. Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of of the components described in this Owner's Report du , and state that to the best of my knowled sures described ill this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concel~~ing the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his en~ployershall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Co~nni~ssions k ~ T 7h//

National Board, State, Provincc, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements K T Y ~ :C~ 1 . 5 2 A s required by the provisions o f the ASME Code Section XI Job Number Ell-1051232401 Sheet I of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNI' I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/25/06
3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company Maintenance Deuartment N/A Address : Joseph M. Farley Nuclear Plant Expiration Date N /A
4. Identification of System RHRILOW HEAD SAFETY MJECTION SYSTEM (a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - 89 Edition N/A Addenda, N/A Code Case

+ I

6. Identification of Components Repaired or Replaced and Replacement Components:

I Nameof Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

HYD SNUBBER GRINN ELL 20208 K/A PNP-222 1977 REPLACED hO HYD SNUBBER GRIXNELL 20724 1 N/A 10323 1983 R I 1'1 AI'l-MLN1 NO

7. Descri~tionof Work REPLACEMENT SNUBBER RHR6RG8 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE. REF. TRANSACTION NL'MBEK ')Ooj:!

MED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RTypr : ~ 1.52 As required by the provisions of the ASME Code Section XI I Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I Ell-1051232401 Sheet 2 of 2 SUPPOR'rS BIIIL'I'TO AISC-1969 AND WELDED 1'0 AWS D1.1-86 I Certificate of Compliance I We certify that the statements made in the report are correct and this ASME Code,Section XI.

Type Code Synlbol Stamp Certificate of Authorization Number Signedgd L&%%w-NIA Owner or Owner's Designee. Title replacement repair or replacenlent N/A Maintenance Manager Expiration Date Date confornis to the r ~ ~ lof hiA I

e stlic II, the undersigned, holding Certificate of Inservice Inspection alid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of / and employed by /'f5~~/- of P w , CT have inspected the components described in this Owner's Report during tidperiod ,&$fw, 6 to ,and state that to the best of my knowledge and belief, the Owner hadperformed examination rrktive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore. neither the 1nsDector nor his e&~over shall be liable in any nlanner for any personal injury or property damage or loss of any kind arising fiom or connected with this inspection.

~ornniissions /&8'27 &N//

National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements lvrype:~ 1.52 As required by the provisions of the ASME Code Sect~onXI 1 Job Number f 1

1. Owner 2. Plant I Ell-1061322601 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Colunlbia, Alabama 36319 Date (as agent for Alabama Power Company) 0511 2/06
3. Work performed by Type Code Symbol Stamp N/ A Name : Southern Nuclear Operatine Company Maintenance Department Authorization Number Address : J o s e ~ hM. Farley Nuclear Plant NIA I
4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19 - 80 Edition
6. Identification of Components Repaired o r Replaced and Replacement Components:

NA Addenda.

Addenda, NiA Code Case Code Case II Name of Name of Manufacturer National Other Year Repaired, ASlME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes I No)

HYD SNUBBER GRlNNELL 10189 N A FNP-222 1077 R t P l AC t l l NO HYD SNUBBER GRlNNELL 17003 KIA FNP-222 1977 REPLACEMENT NO

7. Description of Work REPLACEMENT SNUBBER RHR6R65 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER 93023 ON REPLACEMENT SN UDDER Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements RTYPE : 1.1.52 As required by the provisions of the ASME Code Section XI Job Kumber El 11061322601 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Certificate of Compliance I

We certify that the statements made in the report are correct and this replaccmcnt conforms to thc rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NIA

( Certificate of Authorization Number NIA Expirat~onDate NIA I S~gned @ Maintenance Manager Date 711 v / b L Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid comrnissioil issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of f/ and employed by @&cr of Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concer~lingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal iniury or property danmge or loss of any kind arising from or connected with this inspection.

Commissions '42' Bg-7 A.N//

National Board, State, Province, and Endorsements T W t / / 9 *@b

/ '

Form NIS-2 Owner's Report for Repairs or Replacements HType : L1.52 As rcquired by the provisions o r the ASME Code Section X I Job Number Ell-1061421701 Sheet 1 of 2

1. Owner Southern Nuclear Operating Company
12. Plant Farley Nuclear Plant

( unit I 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 05/20/0h

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Companv Maintenance Department N/A Addrcss : Joseph M. Farlev Nuclear Plant Expiration Date N/A
4. Identification of System RHRLOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code: ASME SECTION III (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19 89 Edition
6. Identification of Components Repaired or Replaced and Replacement Components:

N/A Addenda, Addenda, N/A Codc Case Code Case I

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacture Serial Number Board Identification Built Replaced, or Code r No. Replacement Stamped (Ye5I No)

HYD-SNUBBER GRINNELL 208 12 N/A FNP-222 1977 REPLACE11 NO HYD-SNUBBER GKINNELL 267353 K7668 N/A 10323 1983 REPLACEMENT NO

7. Description of Work REPLACEMENT SNUBBER KHKl10 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF: TRANSACTION NUMBER 93504 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic Normal Operating Pressure None Other I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Codc Section XI Job Number N12-1051231801 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Certificate of Compliance We certify that the statements made in the report are comcl and this replacement conforms to the rules of the ASME Code.Section XI. repair or replacemenl Type Code Symbol Stamp N IA Certificate of Authorization Number N*! Expiration Uate hT/A Signed I Z ~ &%&- Maintenance Manager Date 7 / ~ Y / D Owner o r Owner'z Desienee. Tille Certificate of Inservice Inspection I. the undersigned, holding id commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of , and employcd by fi&c of a7 have inspected the components described in this Owner's Report during the eriod to Z~D W E U6 , and state that to the bcst of my knowledge and belief, the owncf has p6rformed e x a m i n a t i o n s a n d e n codective measures duscribed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implicd, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions 1.4/ KT7 National Board, 'state, Province, and Endorsements Dare

/

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number E13-1051231901 Sheet 1 of 2

1. Owner 2. Plant Unit Farley Nuclear Plant Southern Nuclear Operating Company 40 Inverness Center Parkway Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319 Date FNP 1 (as agent for Alabama Power Company) 04/24/06
3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear O ~ e r a t i nC~o: m ~ a n vMaintenance Devartment Authorization Number N/A Address : Joseph M. Farley Nuclear Plant Expiration Date N/A
4. Identification of System CONTAINMENT SPRAY SYSTEM 5.

(a) Applicable Construcl~onCode. SEE NOTE 19 - Edit~on Addenda, Code Case (b) Applicable Sectlon XI Utilized For Repiurs Or Replacements. 19 89 Ed~t~on NIA Addenda, NIA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes / No)

HYD SNUBBW GRINNELL 22378 N/A FNP-222 1977 REPLACED NO HYD SNUBBER GRINNELL 13690 NIA 20825 1983 REPLACEMENT NO I

7. Description of Work REPLACEMENT SNUBBER CSR290B WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF. TRANSACTION NUMBER 92920 T-3 PERFORMED ON REPLACEMENT SNUBBER
8. Test Conducted Hydrostatic [7 Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements ~ y p :eL1.52 As required by the provisions of the ASME Codc Section XI Job Number El3 1051231901 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

NOTE: SUPPORTS ARE 1)ESIGNED TO AlSC- 1969 AN]> WELDED TO AWS D 1 . 1 Certificate of Compliance We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbot Stamp NI A Certificate of Authori~ationNumber h'lA Expiration Datc NIA Signed P' -

0 Maintenance M a n a p r Dale 7//Y/ 0 6 Owner or Owner's Designec, Title L

Certificate of Inservice Inspection Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By sign~ngt h ~ certificate s neither the Inspccior nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owncr's Report. Furthermore, ncither the Inspector nor his cmployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising f ~ o mor connected with this inspection.

Commissions

Form NIS-2 Owner's Report for Repairs or Replacements R I - ~ ~ :C~1.52 As required by the provisions of the ASME Code Section XI

) Job Number I 1

1. Owner 2. Plant I E13-1051233501 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/05
3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Ooeratine Companv Maintenance De~artment Authorization Number N/A I

Address : J o s e ~ hM. Farlev Nuclear Plant Expiration Date NIA

4. Identification of System CONTAINMENT SPRAY SYSTEM I(a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, I

19 19

- Edition

-89 Edition

6. Identification of Components Repaired o r Replaced and Replacement Components:

NlA Addenda, Addenda, N/A Code Case Code Case II REPLAC~MENTSNUBBER CS2RI3 t WAS REBUILT PRE-OUTAGE TO MEETSCHEDULE. REF: TRANSACTIOk NUMBER ()0485 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

Hydrostatic Pneumatic NormalOperating Pressure None Other Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements KTYPC: ~1.52 As requircd by tlie provisions of the ASMECode Section XI

) Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E13-1051233501 Sheet 2 of 2 SUPPORTS BUILT TO AISC-1969 AND WELDED (1 AWS D 1.1-86 i

Certificate of Compliance We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code, Scct~onXI. repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization Number NIA Expiration Date NIA Signed e'. Maintenance Manager Date 7/1y/b 4 Owner or Owner's Designee, Titlc II, the undersigned, holding Certificate of Inservice Inspection id commiss~onissued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of 2fh?xma. W

- and employed by A&&-

have inspected the components described of.

in this Owner's Report during the feriod M .z/ , 6 to to the best of my knowledge and belief, the Owner has ~ d o r m e dexamination Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspec tion.

Commrss~ons & W9 //

National Board, Statc,'Province,and Endorsen~ents 1 Date &Ry/?, 7 6 0 6

Form NIS-2 Owner's Report for Repairs o r Replacements HTYPC : ~ 1.52 As required by the provisions of the ASME Code Section XI Job Number 0 1. Owner 2. Plant E13-1051233601 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South I FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/06

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company Maintenance Department

(

N'A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A 1 4. Identification of System CONTAINMENT SPRAY SYSTEM I

5.

(a) Applicable Construction Code: SEE NOTE I9 - Edition Addenda, Code Casc (b) Applicable Section XI Utilized For Repairs Or Keplace~nents, 19 - 89 Edition N/A Addenda, N/A Code Case 6, Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manuiacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes / No)

HYD SNUBBER GRINNELL 15759 N 'A FN1'-222 1977 IZEPL AC bI) NO l l Y D SNUBBER GRINNELL 26729T Pi A 10323 1082 RkI'LA( L M E h T NO

7. Description of Work REPLACEMENT SNUBBER CSR294 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER g001(,

MED ON REPLACEMENT SNUBBER Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements I ~ T Y ~:C~ 1.52 As required by the provisions of the ASME Codc Section XI Job Kumber E13-1051233601 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SlJPPORTS BUI1.T TOAISC-1969 AND WELDED 1.0 AWS D l .I-86.

Certificate of Compliance We certify that the statements made in the report ore correct and this replacement conforms to the rilles of'thc ASME Code.Section XI. repair or replacement Type Code Symbol Stamp NIA I

Certificate of NIA Exp~rat~onDate Maintenance Manager Date 7 1l~ / 6 6 Owner or Owner's Designee, Titlc II, the undersigned, holding a Certificate of Inservice Inspection d commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of have inspected the components described in this Owner's Report during &e period  % 21, ZaDB to 19. W b L . and state that to the best of my knowIedge and belief, the Owner has pefformed examinations rredive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his elnployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Comn~issions R/AV kkJ //

National Board,'State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements I I T : ~ 1~. 5

~ 2 As required by the provisions of the ASME Code Section XI Job Number 1 E13-1051239101 Sheet I of 2 I. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant Highway 95 South FNP I 40 Inverness Center Parkway r Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 05/0 1 106

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Companv Maintenance Department Authorization Number N/A Address : Joseph M. Farley Nuclear Plant Expiration Date N/A
4. Identification of System CONTAINMENT SPRAY SYSTElM

\

5.

(a) Applicable Construction Code: SEE XOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 -89 Edition N!A Addenda, N/A Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Manufacturer National Other Year Repaired, ASME I

6 Component tIY D SNUBBER Manufacturer CiRIhNELL Serial Number 24067 Board No.

NfA Identification QP-1470 Ruilt I987 Replaced, o r Replacement KbPI.AC'ED Code Stamped (Yes / No)

N0 I

HYDSNUBBER GRINVELL 1107 N 'A 20825 1983 REPLAC'I,MF,NT N0

7. Description of Work REPLACEMENT SNUBBER CSRIGSB WAS REBUILT PKE-OUTAGE TO MEET SCHEDULE REF 'TRANSACTION NUMBER 8')31,I VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None [XI Other I Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RTypc : L1.52 As required by thc provisions of the ASME Codc Section XI Job Number E13-1051239101 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SUPPORTS BUILT TO AISC-1969 AND WELDED '1'0 AWS 111.1-86.

I Certificate of Compliance I We certify that the statements made jn the report are correct and this ASME Code,Section XI.

Type Code Symbol Stamp Certificate of Authorization Number Signed N/A Owner or Owner's Designee. Title replacement repair or replacelnent N1.4 Maintenance Manager Expiration Date Date conforms to the rilles of the I

I Certificate of Inservice Inspection I I, the undersigned, holding id commission issued by the National Board of Boiler and Pressure Vessel Illspectors and the State or Province of and employed by ,%~&LT of 9 Cr have inspected the components described in this Owner's Report during the pgriod t/.ZCtTd to L V W , Z006; , and state that to the best of my knowledge and belief, the Owner has per6rmed examinations arid takedcorredive measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspeclor nor his employer makes any warranty, expressed or in~plied,concerning the examinations arid corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Form NIS-2 Owner's Report for Repairs or Replacements I ~ T Y ~: C~ 1.52 As required by t h e provisions o f the ASME Code Section XI Job Number rn 1. Owner 2. Plant E13-1061034101 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

OS!O I i00

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nilclear Operstine Company Maintenance Department

[

N/A Address : Joseph M. Farley Nuclear Plant Expiration Date NIA I 4. Identification of System CONTAINMENT SPRAY SYSTEM 5.

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda. Codc Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - 89 Edition N:A Addenda, NiA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Manufacturer National Other Year Built Repaired, ASME Component Manufacturer Serial Number Board Identification Replaced, o r Code No. Replacement Stamped (Yes I No)

HYD SNUBBFll GRlNNELL 24070 N .4 20825 I087 REI'IAE'tD NO NYD SNUBBER GRINNELL 3535 NpA QP- 1470 1983 1lEPLAC'I:M t NT NO

7. Description of Work I REPLACEMENT SNUBBER CSRIGSA WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF. TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. Test Conducted Hydrostatic Pneumatic iVormal Operating Pressure None Otlrer I Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements - RType : L1.52 As required by the provisions of the ASMECodc section XI Job Number E13-1061034101 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SUPPORTS BIJILT 'TO AISC-1969 AND WELDED TO AWS Dl , 1 4 6 .

Certificate of Compliance We certify that the statements made in the report are correct and this replacement conforms to the t.ules of the ASME Code,Section XI. repair or replacc~nent Type Code Symbol Stamp N/A I Certificate of Authorization Number N/A Expiration Date N/A 1 Signed Maintenance Manager Date 7 f 11 0 /

Owner or Owner's Desienee. Title I Certificate of Inservice Inspection 1 Inspectors and the State I

of have inspected the conlponents described

, and state that ures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall b e liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

~ornmissions t/867 ,+A// I National Board, Stite, ~'rovince,and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RTYPC :L1.52 As required by the provisions of the ASME Code Section XI Job Number I 1

1. Owner 2. Plant I E21 - 1040289801 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)(

March 23, 2005 1 3. w o r k performed by Type Code Symbol Stamp NIA N a m e : Southern Nuclear Operatine Companv Maintenance Department Authorization Number NIA Address : Joseph M.Farlev Nuclear Plant Expiration Date NIA

4. Identification of System Charging System (a) Applicable Construction Code: A S M E Section It[,

(b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19

- 68 Edition 89 Edition

6. Identification of Components Repaired o r Replaced and Replacement Components:

N/A N/ A Addenda, Addenda, N/A NIA Code Case Code Case II Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes 1 No)

Disc Velan UNKNOWN

  • N/A F'NP Purchase Order 1973 Replaced No FNP2 Disc Velan 7830 NIA FNP Purchase Order 2004 Replacement' Yes QP040709
7. Description of Work The disc in the 1A Charging Pump Discharge Check Valve (QlE21V0122A) was replaced with a11 upgraded disc to preclude the failure of the check valve seat and anti-rotation nubs. This was a result of the root cause corrective aclion from CR 2004002293. RER 1040560501 provided the reconciliation for the new disc. (Ref: Transaction Number 58281)
8. Test Conducted rn Hydrostatic Pneumatic [XJ Normal Operating Pressure None C] Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements ~ ~ y :pL1.52 e

As rcquired by the provisions of the ASME Code Section XI Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E2 1 - 1040290801 Sheet 2 of 2 Since the original valve was manufactured to the 1968 Draft Pump and Valve Code, no data report was suppl~ed,and the original disc serial number is unknown.

The serial number for the complete valve is 209 as identified on the Qual~tvRelease siiuolted bv Westin~houseat the tirnc of installation.

(

ASME Code,Section XI.

Type Code Symbol Stamp Certificate of Authorization Number Signed Certificate of Compliance We certify that the statements made in the report are correct and this NIA Owner or Owner's 13esignee, Title replacement repair or replacemenr NIA Expiration Date Maintenance Manager- Date 7/

'/o (

NIA 1

conforms to the rules of the I

Certificate of Inservice Inspection I, the undersigned, holdin valid commission issued by the National Board of Boi!er and Pressure Vesscl Inspectors and the State or Province of - / and employed by 545W of

, G7 IY have inspected the components dewrihed in this Owner's Report during the period p& to , and state that to the best of my knowledge and belief, the Owner has pdformed examinations cgrrective measures described in this Owner's ~ e ~ oin ;accordance with the requirements o i t h e ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions 7 &  !  ! @

National Board, State, Province, and Endorsements Date d-&~/p, &27&

/

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

1. Manufactured and certified by VELAN INC., 2125 WARD AVE., MONTREAL., QUEfbCC, CA (name andaddress d NPT Cerbficatehclder) LY
2. Manufactured for ALABAMA POWER COMPANY CIO SOUTHERN NUCLEAR OIP BOX 1295 BIRMINGHAM AL 3c201 USA (name and address of Purchaser)
3. Location of installation FARLEY NUCLEAR PLANT HIGHWAY 95 SOUTH COLUMBIA AL 36319 USA (name and address)
4. Type: 78431 REV.C SA-182 F316 75,000PSI NIA 2004 (drawmg no.) [mllspec. m.) (lensle suenglh) (CRNI (year bull11
5. ASME Code. Section Ill, Division 1: 1971 SUMMER-1971 1 - NIA fed~tiar) (addenda date) (class) (Code Case no )
6. Fabricated in accordance with Const. Spec. (Div. 2 only) NIA Revision NIA Date NIA (M.)
7. Remarks: DISCS HEAT NUMBER: 74244 Test No. 60139 (HIF: ALLOY-40)

SPARE PART FOR 3" 1500# BOLTED COVER STAINLESS STEELSWING CHECK VALVE; WID: 3C88 8 . Nom. thickness (in.) N/A Min. design thickness (in.) N/A Dia. ID (ft & in.) NJA Length overall (ft B In.) NIA 9 When appl~cable,Cert~ficateHolders' Data Reports are attached for each item of thls report Part or appurtenance Nabonal Board No. In Part or appurtenance National Board No ~n Ser~alNumber Numerical Order Senal Number Nurner~calOrder (26) ,.

(27) 128) ,

(29)

(30)

(31 (32)

, (33)

(34)

(35)

(36)

(37)

(38)

(39)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure NIA psi. Temp.N/A"F. Hydro test pressure NIA at temp."F Operating Condition: 2500 at 650 F

'Supplemental m n f m h o n In the fmof Bsts, sketchas, or drawinw m y bo used pw&d (1) clze Is 8% x 11, (2) infonnaCon In I @ ~ 2S and 3 on thls Data Report a included on each sheet. (3) each sheet IS numbered and the number d W Q is recordedat the lop of Ws form This fonn ( E W )may ba obWnd frwn the Order Dept.,ASME, ZZ Law Drive. 00x2300, Fairfield. N J 07007-2300.

FORM N-2 (Back - Pg.2 OF 2 )

Certificate Holder's Serial Nos. 7827,7830 through -. 783 7 Des~gnspecifications cemfred by

(*

NIA applicabk)

CERTIFICATION OF DESIGN P.E.State N/A Regno N/A S-Q420$2 -

Oes~gnreport* cert~fiedby 8 MA P E State NIA Reg no N/A (whenappltcable)

I We certify that the statements made in this reporf are correct and that this (these) 3"-1500#SWING CHECK VALVE DISCS conforms to the rules of constructionof the ASME Code, Section HI, Division 1.

NPT Certificate of Authorization No. N-2798-2 Expires APRIL 20,207 1 -

Dale 8 NOV. 2004 Name VELAN INC. Signed (NPT CelllficateWdm) (AumcnreQRepewnbliw)

CERTIFICATE OF INSPECTION i

I, the undersigned, holding a valid cammission issued by the National Board and Pressure Vessel Ins rs and the State or Province of Quebec and employed by REGlE DU BATIMENT DU QUEBEC 1 of Quebec have inspected these items described in this Data Report on f l m b m b r /O and state that to the best af my knowledge and belief, the Certificate Holder has fabricated these palts or appurtenances in accordance with the ASME Code. Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this cerlificate, neit makes any warranty, expressed or implied, wncerning the equipment described in this Data Report. nor his employer shall be liable in any manner for any personal injuq or property damage or loss of an

., J.-P.FACliINElTl QC 13813 Commissions

[Nan. Ed. (ind. endorreawn&) and saw IX prw. an no.

fl

Form NIS-2 Owner's Report for Repairs or Replacements RType : L 1.52 As required by the provisions of the ASME Code Scction XI Job Number I I

1. Owner Southern Nuclear Operating Company
2. Plant E

Fariey Nuclear Plant Sheet Unit 1 of 2 40 Inverness Center Parkway Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319 IDate FNP 1 (as agent for Alabama Power Companj I

May 7.2005

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear O~eratingCompany Maintenance Department Authorization Number N/A Address : Joseph M. Farlev Nuclear Plant Expiration Date
4. Identification of System Charging System 5.

(a) Applicable Construction Code: ASME Swtion 111, 19 - 68 Edition No Addenda. NIA Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 2- Edition NIA Addenda. N/A Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No:

Disc Velnn UNKNOWNf NIA FNP Purchase Order 1973 Replaced Y cs FNP2 Disc Velan 7828 N/A FNP Purchase Ordcr 2002 Rcplace~nent Yes OPOj0709

7. Description of Work The disc in the 1C Charging Pump Discharge Check Valve (QlE21 V0122Cj was replaced with an upgraded disc to preclude the failure of the check valve seat and anti-rotation nubs. This was a result of the root cause comctiue action from CR 2004002293. RER I W0560501 provided the reconciliation for the new disc. (lief: Transaction Number 597521
8. Test Conducted C] Hydrostatic Pneumatic Normal Operating Pressure None C] Other Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements RTYPC: L1.52 As required by thc provision^ of the ASME Code Section XI Job Number I 1 0, 9. Remarks (Applicable

-- Manufacturer's Data Reports to he attached)

I E2 1 - 1040290201 Sheet 2 of 2

  • Since the original valve was manufactured to the 1968 D& Pump and Vdvc Code. no data rcpon was supplied, and the otigina1disc serial number is unknown.

L Certificate of Compliance We cenify that the statements made in the report are correct and this replaccmcnt conronns to the rules of the ASME Cods.Section XI. repair or replacement Type Code Symbol Stamp - - NIA - --

Certificale of Authorization Number NIA Expiration Date NlA Signed /%%%V- Maintenance Manager Date S[LL'OJ-Owner or Owner's Designee. Title I I, the undersigned. holdin Certificate of Inservice Inspection atid commission issued by the National Board oi'Boiler and Pressure Vesscl Inspectors and the Stale or Province of HS&CT- oT have inspected the components described

-6 - Lo Y /.& . and slate that to thc best of my knowledge and belief, t h e T ? a s $ c r f o r m e d e i a m i n a t i o n s ~ c o f r e z " , e a s u r e s desribcd in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certif cate neither h e Inspector nor his employer rnakcs any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

omm missions R/ g T &jf/

National Board. Stak, Province, and Endorsements

.. FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

Not to Exceed One Day's Production

(-me and .<dress of Purctleser!

3. Location of installation FARLEY NUCLEAR PLANT HIGHWAY 95 SOUTH COLUMBIA AL 36319 USA (name and abdress)
4. Type: 78431 REV.C I SA-18; F316 75,000 PSI N/A 2001 (draGng no.) 7iGiEZ57 (tensile s!renglFi) ((5RN: (.par aud!]
5. ASME Code, Section Ill, Division 1: 197U SUMMER-1971 I N/A (edlbon) (addenda dale) (class) (Code Case no )
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N!A Rev~sion N/A Date N/A (no.)

i

7. Remarks: DISCS HEAT NUMBER: 74244Sesl No. 60139 (HIF: ALLOY-40)

SPARE PART FOR 3" BOLTED COVER STAINLESS STEELSWING CHECK VALVE

8. Nom. thickness (in.) N/A Min. design thickness (in.) NIA Dia. ID (ft & in.) N/A Length overall (ft 8 in.) N/A
9. When applicable, Certificate Holders' Data Re'brts are attached for each item of this report:

Part or appurtenance National Board No. in Part or appurtenance National Board No. in Serial Number Numerical Order Serial Number Numerical Order

/

(1) DISC SN: 7828/ NIA (26)

(2) DISC SN: 7829 NfA (27)

(3) (28)

(4) (29)

(5 (6)

(30)

(31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(1 1)

(12)

(36)

(37) A -

(13) f (38)

(14)

(15)

- (39)

(40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21 (46)

(22) (47)

(23) (48)

(24) (49) I (25) (50) 0' 1 0 Design pressure 2500 MAX psi. Temp. 650 O f . Hldro test pressure NIP at iempPOF 1 1

'Supplemental Intomtion in the form of lists, sketches.ofd r a w s may be used provided (1) size is 8% x 11. (2)informalion in i l m 2 and 3 on th~sDara Report is mduded on each sheel. (3) each sheat is numbered and the number of sheets is recorded a! the top d this fonn.

(12188) This form (00040) may be obtained (rwn the Order Dept.. ASME. 22 Law Drive. Box2300. Fairlield. NJ 67007-2300

FORM N-2 (Back - Pg. 2 OF 2 )

S ,0 4 2 0 75 Certificate Holder's Serial Nos 7829 through 7829 f '

Deslgn specifications certified by NIA

( M e n applicabe)

CERTIFICATION OF DESIGN P.E.State NIA --

1 Design repori' certified by NIA P.E.State NIA Reg.no N/A -

(when applicable)

I CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) 3"-1500# SWING CHECK VALVE DISCS conforms to the rilles of construction of the ASME Code. Section Ill. Division 1.

NPT Certificate of Authonzatron No N-2798-2 Dale 25 OCTOBER 2004 Name VELAN-INC Exptres APRIL 20, 2007 '

(nC

/I n --

k (NPT CerD6flcsle tidam) IhLTwzffi Reixesentauve:

Quebec and employed by

~ G I DU EB Aou Q U ~ B E C Commissions -

(Ngl7. Bd. (ind. endorsements)and sale a p o v , and m.1

Form NIS-2 Owner's Report for Repairs or Replacements R T ~ P:~ 1 . 5 2 As requircd by the provisions of the ASME Code Section XI 1 Job Number I I 1 1. Owner 12. Plant I E21-1051229301 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company)

I I

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Oaeratine Company Maintenance Department Authorization Number N/A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A I 4. Identification of System R H R n O W HEAD SAFETY INJECTION SYSTEM I

(a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda. Code Case (b) Applicable Section XI Utilized For Rcpairs Or Replacements. 19 89 Edition NIA Addenda, N/A Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

FIYD SNUBBER GKINNELL 12049 NIA FNP-222 1977 KEPLACBO KO HYD SNUBBER GRINNELL 13918 hIA 10825 1983 REPLACHMEYT NO

7. Descriotion of Work REPLACEMENT SNUBBER C V C S K SWAS ~ REBUILT PKE-OUTAGE TO MEET SCHEDULE: REFERENCE TRANSACTION NUMBER ERFOKMED ON REPLACEMENT SNUBBER I Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure "F

None Other

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number E21-1051229301 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SUPPORTS DESIGNED T O AICS- 1969 AND WELDED TO AWS D 1.1-86.

Certificate of Compliance We certify that the statcrnents made in the rcport are correct and this replacement conforms lo the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp - N/A I Cenificate of Authorization Number N/A Expiration Date N/A I Signed Maintenance Manager Date 7/I y/o 6 Owner or Owner's Designee. Title Certificate of Inservice Inspection I, the undersigned, holding lid commission issued by the of Bo~lerand Pressure Vessel Inspectors and the State or Province of - and employed by of

. L-T have inspected the components described in this Owner's Report during tkE period a, m G to -ai~f//9. &d L , and state that to the best of my knowledge and belief, t h e s a s p6rformed e x a m i n a t i o n s ~ nedrrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, cxpressed or impl~ed,concerning the examinations and corrective measures described in this Owncr's Reporl. Furthermore, neither the Inspector nor his employer shall hc liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspect~on.

Form NIS-2 Owner's Report for Repairs or Replacements RTypr : ~ 1.52 As required by the provisions of the ASMECode section XI

.lob Number I I

1. Owner 2. Plant I E21-1051230101 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 1 3. Work performed by I Type Code Symbol Stamp Name : Southern Nuclear Operatine Cornl~anvMaintenance Department Address : Joseph M. Farley Nuclear Plant N;A I 4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 I9

- Ed~tion 89 Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:

NIA Addenda, Addenda, NIA Code Case Code Case I

I Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code KO. Replacement Stsniped (Yes / Vo)

HYD SNUBBER GRINNPLL 11719 N'A tiN1'-222 1077 RCPLAC ED KO HYD SNUBBER GRlKNtLL 11919 h'A 20825 1983 IltlJLAC E M ElhT NC)

7. Description of Work REPLACEMEhT SNUBBER SIR62 WAS REBL'ILT PRE-OUTAGE TO MEET SCHEDULE R E F TRAUSACTlOl UUhlBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted C] Hydrostatic Pneumatic Normal Operating Pressure None [XJ Other I Pressure PSI Temperature "F I

Form NIS-2 Owner's Report for Repairs or Replacements HType : L1.52 As required by the provisions of the ASME Codc Section XI Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051230101 Sheet 2 of 2 SUPPORTS BUILT 7'0AISC-1969AND WELDllD TO AWS D l . 1-86, Certificate of Compliance Wc certify that the statements made in the report are correct and this ASME Code,Section XI.

Type Code Symbol Stamp Certificate of Authorization Number Signed N/A Owner or Owner's Desi~mee.Title replacement repair or rcplacenlent NIA Mamtenance Manager Exp~rat~onDate Date 7 I

confom~sto the rules of the Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel 1nspectol.s and the State or Province of / and enlployed by #k5&%5- of have inspected the components described

, and state that to the best of my res described in this Owner's ~ e ~ oin ;accordince with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures desciibed in tl~jsOwner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal insury or property damage or loss of any kind arising from or connected with this inspection.

omm missions &/ Rf7 MI/

National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements K T ~ I :I Lf

~ .52 As requ~redby the provisions of the ASME Code Section XI Job Number I 1

1. Owner 2. Plant I E21-1051230201 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FUP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 05/02/06
3. Work performed by Type Code Symbol Stamp WA Name : Southern Nuclear Operating Comuanv Maintenance Deuartment Authorization Number Address : Joseph M. Farlev Nuclear Plant Expiration Date
4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM 5.

I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 10 19 Edition 89 Edition N/ A Addenda, Addenda, NfA Code Casc Code Case I

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes 1 No)

HYD SNUBBER GRINNELL 100 10 N:A FNP-222 1977 REPI.AC'ED NO HYD SNUBBER GRINNELL 15517 NIA FNP-222 1977 K1 P I A C E M E N 'I NO

7. Descri~tionof Work I REPLACEMENT SNUBBER CVCR2G4 WAS REBUl LT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER 0()4')2

. Test Conducted Hydrostatic C] Pneumatic Normal Operating Pressure C] None [XI Other I Pressure PSI Temperatr~re O F

Form NIS-2 Owner's Report for Repairs or Replacements HTypr : L1.52 As required by the provisions of the ASMECode section XI Job Number I 3

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051230201 Sheet 2 of 2 SUPPORTS BUII-T TO AISC-1969 AND WELDED 1'0 AWS D l . 1-86, I

I Certificate of Compliance I We certify that the statements made in the report are correct and this ASME Code,Section XI.

Type Code Symbol Stamp Certificate of Authorization Number Signed Rd 3

N/A Owner or Owner's Designee, Titlc replacement repair or replacement N/A Expiration Date Maintenance Manager Date 7 1h conforms to the rules of the NIA I

Certificate of lnservice lnspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stale or Province of R/ and employed by /G,B C= r of

. Cr have inspected the components described in this Owner's Report duringhe period & f l 1 2 / . -6 to , and state that to the best of nly knowledge and belief, the Owner has peTformed examimtions Owner's ~ e ~ oinr accordance f with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Co~nmissions & fn National ~oard,'Stat'e, Province, and Endorsements Date ~ L V Mm ~,76

/

Form NIS-2 Owner's Report for Repairs or Replacements I<Typr : L 1.52 As required by the provisions of the ASME Code Section XI Job Number I 1

1. Owner 2. Plant I E21-1051231301 Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 04/26/06
3. Work performed by Type Code Symbol Stamp N/A Name : Southern N~~clear Operating Company Maintenance Deuartment Authorization Number N!A Address : Joseph M. Farlev Nuclear Plant Expiration Date N /A 1 4. 1dentifiAtion of System HIGH HEAD SAFETY INJECTIONJCVCS SYSTEM I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacenients, I9 19 Ed~tion 89 Edition
6. Identification of Components Repaired o r Replaced and Replacement Components:

NiA Addenda, Addenda. N.'.4 Code Cast C'ode C : ~ S C I

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacen~erlt Stamped (YesI No)

FIYD.SNUBBER GRINNE1.L 1 1 182 N?'A FNP-222 1070 KEI~l.ACED NO HYD.SNUBBER GRINNELI. 1021 1 WjA 20825 1081 KEI'LAC'IMENT NO t 7. Descriotion of Work I I REPLACEMENT SNUBBER SIRGSWAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.

. Test Conductecl Hydrostatic Pneumatic Normal Operating Pressure None a Other I Pressure PSI Temperature OF I

Form NIS-2 Owner's Report for Repairs or Replacements n.rypc : 1,1.52 As required by the provisions of the ASME Code Section XI Job Number I I

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051231301 Sheet 2 o l 2 SIJPPOR'TS RIJI 1.I' TO AISC-1969 AND WELDED 1.0 A W S D 1.1-86.

Certificate of Compliance We certify that the statements made ~nthe report are correct and th~s replacement conforms to the rules ofthe ASME Code.Section XI repalr or replacement Type Code Symbol Stamp NIA Certificate of Authorization Number N/A Expiration Date b2J Signed Maintenance Manager Date Owncr or O\vner3sDesignee. Title Certificate of Inservice Inspection tional Board of Boiler and Pressure Vessel Inspectors and the State or Province of Awd~7- of have inspected the components described in this Owner's Report during the period A, $/, to Zi%LL/;I/,W C , and state that to the best of my knowledge and belief, the Owner has derformed examinations and taken co'rrective measures described in this Owner's Report in accordance with the requirements of the ASME Code.Section XI.

By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore. neither the Inspector nor his employel. shall be liable in any manner for any personal injury or property damage or loss of any kind arising from orcorlneuted wit11 tjlis-inspection.

Com~n~ssions A/ BX7 @//

flnspector's Signature National Board, State. Province, and Endorsements 1Date ~ & L L / . ~% /J

Form NIS-2 Owner's Report for Repairs or Replacements HType : ~ 1.52 As required by thc provisions of the ASME Code Section XI Job Number I I

1. Owner 2. Plant I E21-1051231501 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inveraess Center Parktva?:

Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319 Date FNP I (as agent for Alabama Power Company) 04/2G/O6

3. Work performed by Type Code Symbol Stamp N/A I Name : Southern Nuclear Operatine Companv Maintenance Department Authorization Number N /A I Address : Joseph M. Farlev Nuclear Plant
4. Identification of System I

Expiration Date NlA HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I (a) Applicable Construction Code: SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19

- Edition

-89 Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:

NIA Addenda, Addenda, NiA Code Case Code Case II Name of Name of Manutacturer National Other Year Repaired, ASlME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes / No)

HYD SNUBBER GRINNFLL 11641 N/A I-N1'-222 1977 I<kI'l.AC tl) h0 HYD SNUBBER GRINNELL 14678 N/A 20825 1983 KLI'LAC E M t N T h0

7. Description of Work REPLACEMENT SNUBBER CVCRl52 WAS REBUILT PRE-OUrAGE: TO MEET SCHEDULE REF TRANSACTION NUMBER 90)87 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER

. Test Conducted I Hydrostatic Pressure 0 Pneumatic PSI Temperature Normal Operating Pressure "F

0None @ Other

Form NIS-2 Owner's Report for Repairs or Replacements ItTypr: ~1.52 As required by the provisions of the ASME Code section X [

/ Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051231501 Sheet 2 of 2 SUPPORTS HLIILT TO AISC-1969 AND Wiil.DEDTO AWS D1.l-86.

I Certificate of Compliance I 1

We certify that the statements made in the report are correct and this replacement confor~nsto the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp N /A Certificate of Authorization Number N/A Expiral~onDate N!A SignedId &

3

/ Owner or Owner's Designee, Title Maintenance Manager Date 7// %lo I

6 Certificate of Inservice Inspection I, the undersigned, holding a commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of

&T" I C T have inspected the components described in this Owner's Report during the period a, &, 6 to dULY 2 / , Z o b b , and state that to the best of my knowledge and belief, the Owner has peTfornled examinations and tak& cordctive measures described in this Owner's ~ e ~ oinr accordance

with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions ,& n 7 mu Lt/nspector's Signature National Board, State. Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code section XI

) 1. Owner 12. Plant I E21-1051236201 Sheet 1 of 2 I 1 Southern Nuclear Operating Company Farley Nuclear Plant I

40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company 04/24/06 I

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Operating Com~anvMaintenance Department Authorization Number Address : J o s e ~ bM. Farlev Nuclear Plant Expiration Date I
4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM I I (a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 & Edition NIA Addenda, N/A Code Case
6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes I No)

HYD SNURBbR GRlNNELL 12069 NIA FNP-222 1977 REPL.ACEI1 NO HYD SNUBBER GRINNkLL 19016 NIA FNP2-29 1981 REPLAChMENT NO

7. Description of Work REPLACEMENT SNUBBER CVCK447 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REFERENCE TRANSACTION NUMBER ERFORMED ON REPLACEMENT SNUBBER 17 Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number 1 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I E21-1051236201 Sheet 2 of 2 SUPPORTS DESIGNED T O AICS-1969 AND WELDED TO AWS D l .I-86.

Certificate of Compliance We certify that the statements made i n the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replaccrnent Type Code Symbol Stamp N/A

( Certificate of Authorization Number NIA Expiration Date N/A I I Signed Owner or Owner's Designee. Title Maintenance Manager Date 7/(v/ 04 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and thc State or Province of &?I and employed by of CT have inspected the components described in this Owner's Report during t6e period a  %/, w ~ L to /?. 2 0 0 6 , and state that to the best of my knowledge and belief, the Owner hadperformed examinations rrechve measures described in [his Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neithcr the Inspector nor his employer shall be liable in any manner for any persona1 injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions R/

National Board, Slate, Province, and Endorsements Date g&v/4if -zaPG

/ '

Form NIS-2 Owner's Report for Repairs or Replacements ~ ~ y :pL1.52 e

As required by the provisions of the ASME Code Section XI IJob Number I 1 E21-1051238401 Sheet 1 of 2 Southern Nuclear Operating Company 40 Inverness Center Parkway Farley Nuclear Plant Highway 95 South I FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company)

I I

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Overatinr Com~anyMaintenance Department 7 N/A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A
4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM (a) Applicable Construction Code: SEE NOTE 19 - Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Mition NIA Addenda, N1.4 Code Case
6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes1 No)

MECH PAClFlC 38381 N/A QP-2244 1981 REPLACED NO SNUBBER SCIENTIFIC HYD SNUBBER LISEGA 30500420/013 NIA QP050939 2004 REPLACEMENT NO

7. Description of Work SNUBBER SS-2954 B WAS REPLACED AS A SCHEDULED UPGRADE. REF. TRANSACTION NUMBER 90896 VT-3 PERFORMED ON REPLACEMENT SNUBBER C] Hydrostatic C] Pneumatic C] Normal Operating Pressure C] None Other Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements R T Y:~L1.52 As required by the provisions of the ASME Code Section XI Job Number E21-1051238401 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS D1.l-86.

REFERENCE EQUIVALENCY DETERMLNATION (LED) 96-0-022.5. REV. I I Certificate of Compliance We certify that the statements made in the report are correct and this ASME Code,Section XI.

replacement repair or replacement conforms to the rules of the I

Type Code Symbol Stamp N/A Certificate of Authorization Number N/A Expiration Date

~4 Signed (~~/L Maintenance Manager Date Owner or Owner's I)esignec, litle Certificate of Inservice Inspection issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by &&a- of have inspected the components described in this Owner's Report durindthe period s. Z/ -4 6 to the best of my knowledge and belief, the Owner has pcrfbrmed

, and state that described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o r propcrty damage or loss of any kind arising liom or connecled with this inspection.

Commissions an7 //

spector's Signaturc National ~oard,spite. Province, and Endorsements Dale Zw/q, 2.066

Form NIS-2 Owner's Report for Repairs or Replacements KType :L1.52 As required by the provisions of the ASME Code Section XI Job Number F15 - 1060919901 Sheet 1 of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South r FNP 1 a Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company:

May 19,2006

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Comaany Maintenance Department Authorization Number N/ A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A
4. Identification of System Refueling Water Storage Tank 5.

(a) Applicable Construction Code: ASME Section 111, 19 - 71 Edition Winter 1971 Addenda. Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NtA Addenda, NtA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME I

Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

Hex Head Bolts Texas Bolt Company 8 15772 N/A FNP303 1974 Replnced Xo Hex Head Bolts Standard Nut and 22567 N/A P . 0 83578 1981 Rcplacemenl No Bolt Company

7. Description of Work Minor boron was noted on some of the bolting on the manway flange of the refueling water storage tank (Ql F16TOSOl) All bolting was replaced with new bolting. Ref Transaction Number 89239
8. Test Conducted I Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure O F None Other

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code section XI Job Number F15 - 1060919901 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Certificate of Compliance We certify that the statements made in the repon are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp KIA Certificate of Authorization Number N/A Expiration Date N/A Signed Maintenance Manager _ Date 7/7/6 Owner or Owner's Designee, Title I

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of R/ and employed by &sf=/- of k(mm, C T - have inspected the components described in this Owner's Report duringfhe pcriod &b s, . and state that to the best of my knowledge and belief, the 0 b n e r has$erformed measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with [his inspection.

Commissions #7 m//

National hhard, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 A s required by the provisions of the ASME Code Section XI Job Number I I I -

FIG 1060919801 Sheet 1 of 2 I 1 1.

+

Owner 12. Plant Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company I

April 27.2006

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Operatinp Comuanv Maintenance Department Authorization Number Address : Joseph M. Farlev Nuclear Plant Expiration Date
4. Identification of System Refueling Water Storage Tank 5.

(a) Applicable Construction Code: ASMB Section 111, 19 -71 Edition Sua~nar1971 Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NIA Addenda, N/A Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

I Name of Component I M::zLter I Manufacturer Serial Number I National Board No.

I Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes / No)

Studs (13)

I Texas Bolt Company I I NIA I 7047-Q-62730 Replaced Studs (3) Nova Machine 96469 NIA QP98048I Replaced Products Nuts (33) Texas Boll Company CD60 NIA 7047-Q-62730 Replaced Studs (16) Nova 96469 NI A QP98048 1 Replacement Nuts (32) Texas Bolt Company 0 6 0 N/A 7047-4-62730 Replacement

7. Description of Work Minor boron was observed on the flange coming from the RWST to the 16" HBC-42 line. It was determined that in lieu of performing a VT-1 on he bolting, all bolting would be replaced with new bolting. Ref: Transaction Number 91060
8. Test Conducted Hydrostatic Pneumatic (XI Normal Operating Pressure [7 None Other Presswe PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code section XI Job Number 0 9. Remarks (Applicable Manufacturer's Data Report. to be attached)

F16 - 1060919801 Sheet 2 of 2 I Certificate of compliance I We certify that the statements made in the report are correci and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NI A Certificate of Authorization Number NIA Expiration Date Signed Maintenance Manager Date Owner or Owner's Desienee. Title I Certificate of Inservice Inspection lid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State I

or Province of and employed by ,&Ej&G7- of

. C2-r have inspected the components described in this Owner's Report during thgperiod &L a . -6 to /3, -6 , and state that

.)

to the best of my knowledge and belief, he d w n e r has pe/rformed examination c&ective mcasures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

omm missions /PA///

National Board, State, Province, and D

.. 2

Form NIS-2 Owner's Report for Repairs or Replacements HType :L1.5:

As required b y the provisions of the ASME Code Section XI Job Number f

1. Owner 2. Plant I G24- 1041981102 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

May 1,2006

3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Operating Company Maintenance Department Authorization Number NIA Address : Joseph M. Farlev Nuclear Plant Expiration Date h'lA I
4. Identification of System Steam Generator Blow Down System (a) Applicable Construction Code: ASME Scction 111, 19 - 71 Edition Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NIA Addenda, KIA Code Case
6. identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes1 No)

Studs Daniel Construction QlG24CBB5-6147 KIA 7047 1975 Replaced No Company Studs T&T Enterprises $2075 1 Nf A QP040835 2004 Rcplncement No

7. Description of Work Nuts did not have proper thread engagement on the lower flange of the "A" Generator blow down spool piece. All studs were replaced with new studs. Ref: Transaction Number 89.567
8. Test Conducted Hydrostatic 0Pneumatic Normal Operating Pressure [XI None Other I Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number

0. 9. Remarks (Applicable Manufacturer's Data Reports to be attached)

G 2 4 - 1041981102 Sheet 2 of 2 Certificate of Compliance We certify that the statements made in the report arc correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Typc Code Symbol Stamp N/A I

Certificate of Authorization Number N/A Expiration Date Signed - Owner or Owner's Desionce. Title Maintenance Manager Date Certificate of Inservice Inspection 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of &/ and employed by e C ? - of

. C , havc inspected the components described in this owner's Report during the dried my' 1 , Zaob to / I ,~ g d b , and state that to the best of my knowledge and belief, the o w n & ha3 performed examination n drrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his cmployer makes any warranty, expressed or implicd, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

- Commissions e/887 National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements R T Y P ~:L1.52 A s required by the provisions of the ASME Code Section XI Job Number I 1

1. Owner 2. Plant I G24 - 1041981202 Sheet Unit 1 of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

April 24,2006

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company lMaintenance De~artment NI A Address : Joseph M. Farley Nuclear Plant Expiration Date NIA I
4. Identification of System Steam Generalor Blow Down System I (a) Applicable Construction Code: ASME Secllon 111, (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 -

19 89 71 Edition Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

N/A Addenda, Addenda, N/A Codc Case Code Case II Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes / No)

S~uds(6) Texas Bolt Company RR43 N/A 7047-Q-62015 1973 Replaced No Studs (2) Texas Bolt Company 6096034 N/ A QP000766 1997 Replaced I No Nuts (12) Texas Bolt Company 125891 1 N/A QP000448 1992 Replaced Nuts (4) Texas Bolt Company RR66 KIA 70474-62015 1973 Replaced Studs T&T Enterprises S20751 N/A QP040835 20% Replacement 1

Nuts Nova S69452 VIA QP0.50669 200.5 Replacement I No

7. Description of Work During disassembly of the Stcam Generator Blowdown Line on "C'Generator, 1 stud and 2 nuts galled. All studs and nuu were replaced on the upper flange of the spool piece. Rei: Transaction Number 91031
8. Test Conducted I I Hydrostatic Pneumatic Normal Operating Pressure [XI None Other I Pressure PSI Temperature OF I

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number G24 - 1041981202 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Certificate of Compliance We certify that the statements made in the report are correct and this replacement conforms to the rules of the ASME Code.Section XI. repair or replacement Type Code Symbol Stamp NIA 1 Certificate of Authorization Number hr/A Expiration Date N/A I

I Signed Owner or Owner's Desirmee. Title Maintenance Manager Date 1/7 /O 6 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of R/ and employed by ,4&BL7- of f f m @ ~ 7 - have inspected the components described in this Owner's Report ddring the period #& 17, -6 to /3 - 6 , and state that to the best of my knowledge and belief, the o w n e r h& performed examinations o d c t i v e measures described in this Owner's ~ e ~in oaccordance i with the requirements o r the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o r property damage or loss of any kind arising from or connected with this inspection.

Commissions pa/B'7 National ~ o a i dState,

, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements SType :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I I

1. Owner

- 2. Plant I N11 - 1041955302 Sheet I Unit of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FKP I Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company)

M q 17,2006

3. Work performed by Type Code Symbol Stamp N/A e i I Name : Southern Nuclear O~eratineCompany Maintenance Department Authorization Number NI A I Address :
4. Identification of System Joseph M. Farley Nuclear Plant I

Expiration Date N/A Main Steam S y s k m 5.

(a) Applicable Construction Code: ASME Section Ill, 19 - 68 Edition March 1970 Addenda, Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 2 Edition NIA Addenda. NIA Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, or Code No. Replacement Stamped (Yes I No)

Stud Atwood & Monill 4-340 NIA FNP191 1974 Replaced No Nut Atwood & Monill 4-340 NIA FNP191 1974 Replaced No Stud Midsouth Nuclear WIIB-3 NIA QP010884 2001 Replacement No Nut Unytite, Inc. SO7159 NIA QP050784 2004 Replacement No

7. Description of Work During disassembly of valve QlNllV002A. a bonnet nut galled to a bonnet stud. The stud and nut were replaced with a new stud and nut. Ref:

rans sac ti on umber 921 55

8. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure None Other Pressure PSI Temperature OF

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of the ASME Code Section X1 1 Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I N i l - 1041955302 Sheet 2 of 2 Natc: The code year in Block 5 is the code year or the valve. The serial number for the "Replaced" items is the serial number for the valve. No specific information for the stud and nut could be found in the oripinal purchase order.

Certificate of Compliance I

We certify that the statements made in the report are conect and this ASME Code,Section XI.

replacement repair or replncement conforms to the rules of he I

Type Code Symbol Stamp Certificate of Authoriz,alion Nurnber NIA N/A Expiration Date I N/A I Signed Maintenance Manager Ihte 7! 6 [o L Owner or0wner's I>ecivner. Title I Certificate of Inservice Inspection I, thc undersigned, holding a valid commission issued hy [he National Board of Boiler and Pressure Vessel Inspectors and the State or Province of R/ and employed by *@-T of htmw, a- have inspected the components described in t h ~ sOwner's Report during the period &y d; -4 to /&, - 6 , and state that to the best of my knowledge and belief, the 0 d n e r Gas performed examination cor'rective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makcs any warranly, expressed or implied, concerning the examinations and corrective measures described in this Owner's Reporl. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal in.jury or property damage or loss of any kind arising from or connected with this inspection.

Commissions fi n 7 National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number N l l - 1051145201 Sheet 1 of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 3631 9 Date (as agent for Alabama Power Company)

May 17,2006

3. Work performed by Type Code Symbol Stamp N/A Name : Southern Nuclear Oueratinz Companv Maintenance Department

~ N/ A Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A

4. Identification of System Main Steam System 5.

(a) Applicable Construction Code: ASME Section 111, 19 - 71 Edition Summer 1973 Addenda, Code Casc (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 89 Edition NIA Addenda, NIA Code Case

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes/ No)

Disc Assernbly Atwood & Morrell FNPSN8 NI A QP0 10569 2001 Replaced No (SEE NOTE I ) (See Note 2)

Ilisc Assembly Atwood & Morrell FNPSNI K/A QP050618 2005 replace men^ No (SEE NOTE I) (See Note 2)

7. Description of Work The disc assembly for QlNI I V001A was replaced as a part ofregularly scheduled maintenance. Ref: Transaction Number 89894
8. Test Conducted Hydrostatic Pneumatic C] Normal Operating Pressure [XI None C]Other Pressure PSI Temperature "F

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions of thc ASME Code Secrion XI Job Number N11 - 1051 145201 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Note 1. DISCassemblies have bccn reserialized by FNP for tracklng purposes.

Note 2: Purchase order nurnber m d year built reflect the most recent rcfurbish~nent.

I Certificate of Compliance I

I We certify that the statements made in the report are correct and this - replacement conlorms to the rules of the ASME Code.Section XI. repair or replacement Type Code Symbol Stamp NIA

( Certificate of Authorization Number NIA Expiration Date - NIA -I I Signcd Owner or Owner's Desinnec. Title Maintenance Manager Date -7i ? / u 6 Certificate of Inservice Inspection 1 Inspectors and Lhe State of he components described

,and slate that ures described in this Owner's Report in accordance with the rcouirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furlhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions &/ fl? i+r/ //

National Hoard, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by [he provisions of the ASME Code ~ c c t i o nXI IJ o b Number

1. Owner 2. Plant I N11- 1051145301 1 I

Sheet Unit I of 2 Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company) 1 May 17.2006

3. Work performed by 1 Type Code Symbol Stamp I Namc : Southern Nuclear Operating Company Maintenance Department Authorization Number I Address : Joseph M. Farley Nuclear Plant Expiration Date N/A I 4. Identification of System Main Steam System (a) Applicable Cons~rucrionCode: ASME Scction 111, 19 -71 Edition Summer 1973 Addenda, Code Case (b) Applicable Section XI Utili~edFor Repairs Or Replacements, 19 89 Edition KIA Addenda. N/A Code Case 1 6. I 1 1 1 Identification of Components Repaired or Replaced and Replacement Components:

I Name of I Name of I Manufacturer Serial Number I National I Other Identification I Year But I Remired.

~ e c e dr ,

Replacement I AShlE Code Stamped (1

(YesI No)

Disc Assembly Atwood & Morrell FNPSN4 N/A QP010569 2001 Replaccd No (SEENOTE I) (See Note 2)

Iliac Assernhly Atwood & Morrell FNPSN3 N/A QPOSO6 I8 2005 Rcplaccrnent No (SEE NOTE 1) (See Now 2)

7. Description of Work IThe disc a!Isembly for Q1N11 V001 B was replaced as a part of regularly scheduled maintenance. Ref: Transaction Number 89897 I
8. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure [XI None Other Pressure PSI Temperature OF L

Form NIS-2 Owner's Report for Repairs or Replacements RTYPC :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number I 1

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I N11 - 1051 145301 Sheet 2 of 2 Note I : Disc a~senlblieshave been rescriali7sd by FNP for tracking purposes.

I NUU 2: Rlrchase order number and year built reflecr the most recent refurbishmm~

I Certificate of Compliance We wflify thal lhe statements made in the report are correct and this replacemen t conforms to the rules of the ASME Code, Src~ionXI. repair or replaccmenl Type Code Symbol Stamp N/A -

Certificate of Autharirat~onNumbcr NIA Expiration Date NIA Signed L%@hm- Maintenance Manager Datc 7 (7 1 Owner or Owner's Desimee. Ti~le I Certificate of Inservice Inspection d commission issued by the National Board o l B iler and Pressure Vcssel Inspeclors and the State I

or Province of and employcd by $.&T of (5-f havc inspected the components described heriod f l ~ / 7- *& to IJ=V/'J Z&Oc , and state that to thc best of my knowledge and belief. the O a n e r has pcf50rmed cxaminalions and takedcorrhd~vemeasures described in this Owner's Report in accordance with the requiremenls of the ASME Codc,Section XI.

1 By signing this certificate neither the Inspeclor nor his employer makes any warranty, expressed or implied, concerning the I

examinations and corrective measures described in this Owner's Reporl. Furthcrmorc, neither the Inspector nor his employer shall be llable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions National Board. Stale, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements RTYPC:L1.52 As required by Lhe provisions of the ASME Code Section XI

) Job Number I 1

1. Owner 2. Plant I N l I - 1051145401 Sheet 1 of 2 Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South Birmingham, Alabama 35242 Columbia, Alabama 36319 (as agent for Alabama Power Company
3. Work performed by I Type Code Symbol Stamp N/A I Name : Southern Nuclear Operating Company Maintenance Department 1

N/A I Address : Joseph M. Farlev Nuclear Plant Expiration Date N/A I 4. Identification of System 5.

Main Sleam System (a) Applicable Construclion Code: ASME Section 111, 19 - 71 Edition Summer 1973 Addcnda, Code Case (h) Applicable Section XI Utilized For Repairs Or Replacements, 19 Edition NIA Addenda. N/A Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of Manufacturer National Other I

Component Manufacturer Serial Number Board Identification No.

(Yes / No)

Disc Assembly Atwood & Morrell nrPSN7 N/A QPO10569 (SEE NOTE 1 ) (See Note 2)

I>isc Assembly Atrvood & lMorrell FKPSNS N/A QPO506 18 (SEE NOTE I ) (See Note 2)

7. Description of Work IThe disc a;scmbly for Ql N l IVOOI C was replaced as a part of regularly scheduled maintenance. Ref: Transaction Number 89898 I
8. Test Conducted Hydrostatic Pneumatic Normal Operating Pressure [XI None Other I Pressure PSI Temperature OF I

Form NIS-2 Owner's Report for Repairs or Replacements RType : L1.52 As required by the provisions oi'the ASME Code Section XI Job Number N11 - 1051145401 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

Note 1: Disc assemblies have been rescrinlized by PNP for tracking pulposes.

Note 2: Purchase ordcr number and year built reflecc the most recent refurbish~nenl.

Certificate of Compliance We certify that the sla~rncntsmade in the report are correcl and this ASME Code,Section XI.

Type Code Symbol Stamp I Certificate of Authorimtion Number Signcd N/A reptaccrnenl repair or replacement N iA Maintenance Manager Expiration Date Date

'771/

conforms to the ~ l e ofs the J L N/A -I I

Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding ued by the National Board of Boiler and Pressurc Vessel Inspectors and the State or Province of of

- - have inspected the components described

, and state that easures described in this Owner's ~ e ~ oinr accordance

with the requirements o i the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

omm missions Ad//

National l3oa;d: State, Province, and Endorsements

/

Date &L //cZW&

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code Section XI Job Number N11-1051233001 I I Sheet 1 of 2

1. Owner 2. Plant Unit Southern Nuclear Operating Company Farley Nuclear Plant 40 Inverness Center Parkway Highway 95 South FNP 1 Birmingham, Alabama 35242 Columbia, Alabama 36319 Date (as agent for Alabama Power Company 05/02/06
3. Work performed by Type Code Symbol Stamp NIA Name : Southern Nuclear Ooeratin~Companv Mdntenance Department Authorization Number NIA Address : Joseph M. Farley Nuclear Plant Expiration Date NIA
4. Identification of System MAIN STEAM SYSTEM 5.

(a) Appl~cableConstructton Code SEE NOTE 19 -E d ~ t ~ o n Addenda, Code Casc (b) Appl~cableSect~onXI U t i l ~ ~ eFor d Repa~rsOr Replacernentc, 19 5Edmon KIA Addenda, NIA Code Case

6. Identification of Components Repaired o r Replaced and Replacement Components:

Name of Name of manufacturer National Other Year Repaired, ASME Component Manufacturer Serial Number Board Identification Built Replaced, o r Code No. Replacement Stamped (Yes 1 No)

HYD SNUBBER GRlNNELL 17004 NI A FNP 272 1977 REPLACED NO HYD SNUBBER GRINNkLL 19216 NIA 36807 1983 REPLACEMENT NO

7. Description of Work REPLACEMENT SNUBBER MSR2 12 WAS REBUILT PRE-OUTAGE 7'0 MEET SCHEIIULE REFERENCE TRANSACTION NUMHEK 89924 VT-3 COMPLETED AFTER SNUBBER WAS REPLACED Hydrostatic Pneumatic Normal Operating Pressure None [XJ Other I Pressure PSI Temperature O F

Form NIS-2 Owner's Report for Repairs or Replacements ~ y p :eL1.52 As required by the prov~sionsof the ASME Code Section XI Job Number Nll-1051233UUl Sheet 2 of 2

9. Remarks (Applicable Manubcturer's Data Reports to be attached)

NOTh. SUPPORTS ARE DESIGNED TO AISC-1969 AND WELDED TO A W S D I 1 Certificate of Compliance We certify that the statcmcnts made in the report are correct and this replacement conforms to the rules of the ASME Code,Section XI. repair or replacement Type Code Symbol Stamp NIA Certificate of Authorizalion Number NIA Expirarion Date Signed Maintenance Manager Dale Owner or Owner's Desienee. Titlc Certificate of Inservice Inspection 3rd of Boiler and Pressure Vessel Inspeclors and the State

/Ltssc7-- of have inspected [he components described to - VW,ZtX7L , and state that minations and tak~dcorrec6vemeasures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Commissions & 887 //

National Board. State. ~iovince,and Endorsements