ML110610365

From kanterella
Revision as of 07:03, 11 March 2020 by StriderTol (talk | contribs) (StriderTol Bot change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Acceptance Review: MPS3 SG Temporary ARC
ML110610365
Person / Time
Site: Millstone Dominion icon.png
Issue date: 03/02/2011
From: Sanders C
Plant Licensing Branch 1
To: Bartron W, Craft W
- No Known Affiliation
Sandeers, Carleen, NRR/DORL, 415-1603
References
FOIA/PA-2011-0115
Download: ML110610365 (1)


Text

From: Sanders, Carleen Sent: Wednesday, March 02, 2011 11:21 AM To: William D Bartron; 'Wanda D Craft'

Subject:

Acceptance Review: MPS3 SG Temporary ARC

Dear Mr. Bartron:

By letter dated January 20, 2011 (Agencywide Document Access and Management System Accession No. ML110280208), Dominion Nuclear Connecticut, Inc. (DNC or the licensee) submitted a license amendment request for Millstone Power Station, Unit No. 3 (MPS3). The proposed amendment would revise the MPS3 Technical Specification (TS) 6.8.4.g, Steam Generator (SG) Program, to exclude a portion of the tubes from periodic SG inspection. In addition, the proposed amendment would also revise the reporting criteria in TS 6.9.1.7, Steam Generator Tube Inspection Report, to remove reference to previous interim alternate repair criteria and provide reporting criteria specific to the temporary alternate repair criteria. The purpose of this letter is to provide the results of the U.S. Nuclear Regulatory Commission (NRC) staff=s acceptance review of this amendment request. The acceptance review was performed to determine if there is sufficient technical information in scope and depth to allow the NRC staff to complete its detailed technical review. The acceptance review is also intended to identify whether the application has any readily apparent information insufficiencies in its characterization of the regulatory requirements or the licensing basis of the plant.

Consistent with Section 50.90 of Title 10 of the Code of Federal Regulations (10 CFR), an amendment to the license (including the technical specifications) must fully describe the changes requested, and following as far as applicable, the form prescribed for original applications. Section 50.34 of 10 CFR addresses the content of technical information required. This section stipulates that the submittal address the design and operating characteristics, unusual or novel design features, and principal safety considerations.

The NRC staff has reviewed your application and concluded that it does provide technical information in sufficient detail to enable the NRC staff to complete its detailed technical review and make an independent assessment regarding the acceptability of the proposed amendment in terms of regulatory requirements and the protection of public health and safety and the environment. Given the lesser scope and depth of the acceptance review as compared to the detailed technical review, there may be instances in which issues that impact the NRC staffs ability to complete the detailed technical review are identified despite completion of an adequate acceptance review. You will be advised of any further information needed to support the NRC staff=s detailed technical review by separate correspondence.

If you have any questions, please contact me at (301) 415-1603.

Sincerely, Carleen J. Sanders, Project Manager Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation Docket No. 50-423