Proposed Tech Specs Adding Footnote to Tech Spec Table 4.3-8 Re Radioactive Gaseous Effluent Monitoring Instrumentation Surveillance Requirements,Allowing Use of Light Emitting Diodes as Check Sources for Four Noble Gas MonitorsML17305B511 |
Person / Time |
---|
Site: |
Palo Verde ![Arizona Public Service icon.png](/w/images/9/93/Arizona_Public_Service_icon.png) |
---|
Issue date: |
04/30/1991 |
---|
From: |
ARIZONA PUBLIC SERVICE CO. (FORMERLY ARIZONA NUCLEAR |
---|
To: |
|
---|
Shared Package |
---|
ML17305B510 |
List: |
---|
References |
---|
NUDOCS 9105070317 |
Download: ML17305B511 (22) |
|
|
---|
Category:TECHNICAL SPECIFICATIONS
MONTHYEARML17300B3791999-10-0808 October 1999 Proposed Tech Specs,Waiving Requirement to Perform SR 3.8.4.8 for Unit 1 Channels A,B & C on One Time Basis ML17300B3521999-09-29029 September 1999 Revised Bases Pages,Providing Addl Discussion of Options Available to Exit Required Action G of TS 3.8.1 & Revised Page for TS 3.3.7 ML17300B3321999-09-14014 September 1999 Marked-up Tech Specs Pages to TS 5.5.2 & 5.6.2,making Noted Administrative Changes ML17313B0601999-08-31031 August 1999 Rev 1 to PVNGS TS Bases Implemented Between Aug 1998 & Jul 1999 ML17313A9571999-05-26026 May 1999 Proposed Tech Specs,Reducing Spurious Reactor Trip Hazards Associated with Setpoints While Maintaining Plant Protection ML17313A4181998-06-0909 June 1998 Proposed Improved Tech Specs Sections 3.5.1 & 3.5.2,revising Safety Injection tanks-operating & Safety Injection Tanks Shutdown ML17313A1141997-11-0707 November 1997 Improved TS Pages for Section 3.0, LCO & SR Applicability, Section 3.1, Reactivity Control & Section 3.2, Power Distribution Limits. Generic Change to NUREG-1432,Rev 1 Incorporated Into Section 3.0 & 3.1 ML17312B6411997-08-28028 August 1997 Proposed Tech Specs,Allowing one-time Extension of Required Surveillance Interval for Msi Sys Portion Only of ESFAS Logic ML20217Q6801997-08-22022 August 1997 Proposed Tech Specs,Clarifying Wording in TS Bases 3/4.6.1.4, Internal Pressure ML20141H7831997-07-18018 July 1997 Proposed Improved Tech Specs Section 3.8, Electrical Power Sys ML20141H7461997-07-18018 July 1997 Proposed Tech Specs,Providing Addl Info Re Improved TS Section 3.4, Rcs ML17312B0311996-11-0606 November 1996 Proposed Tech Specs 3/4.8.1.1 Re A.C. Sources - Operating ML17300B2651996-06-17017 June 1996 Proposed Tech Specs,Changing Section 1.10 & 3.2.8 & Associated Bases for Obtaining Thyroid Dcfs Used in Definition of Dose Equivalent I-131 ML17312A6491996-04-0101 April 1996 Proposed Tech Specs,Revising TS 3/4.9.6 to Temporarily Allow Use of Hoist Instead of Refueling Machine for Movement of Fuel Assembly at Core Location A-07 ML17312A6401996-03-26026 March 1996 Proposed Tech Specs 3/4.9.6,increasing Refueling Machine Overload Cut Off Limit to 2,000 Lb,In 50 Lb Increments,For Removal of Stuck Fuel Assembly from Core Location A-06 ML17312A6321996-03-26026 March 1996 Proposed Tech Specs,Revising TS 3/4.9.6 to Relocate Refueling Machine Overload Cut Off Limit from TS 3/4.9.6 to Plant UFSAR Per Criteria in 10CFR50.36 & Rev 1 of NUREG-1432 STS for C-E Plants. ML17312A6371996-03-23023 March 1996 Proposed Tech Specs,Revising TS SR 4.8.2.1.e, DC Sources, to Suspend Provision of TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Entry Into Mode 4 Following Sixth Refueling Outage ML17312A5011996-01-17017 January 1996 Revised Page 5-1 Changing Section 5.2.2 to Include Description of Material Used for Control Element Assemblies ML17311B3221995-12-20020 December 1995 Proposed Tech Specs,Reducing Setpoint for MSIS & Rt on Low SG Pressure ML17311B0301995-07-0303 July 1995 Proposed Tech Specs Re Temp Method to Respond to Sustained Degraded Switchyard Voltage ML17311A9771995-06-21021 June 1995 Proposed Tech Specs,Modifying Tables 3.3-4 & 3.3-5 of Section 3/4.3.2 of Esfa Sys Instrumentation ML17311A8651995-05-0202 May 1995 Proposed TS 3.1.2.6,Figure 3.1-1, Min Borated Water Vols, Relocating Elevations That Correspond to Min Required Water Vols for Spent Fuel Pool Into Site Procedures ML17311A8231995-04-18018 April 1995 Proposed Tech Specs Section 3/4.4.4 Re Sleeving Process for SG Tube Repair ML17311A5631994-12-28028 December 1994 Proposed TS Sections 3.9.6 & 4.9.6.1 Re Refueling Machine ML17311A5021994-12-0707 December 1994 Proposed Tech Specs,Changing Note 5 to Table 4.3-1 of TS 3/4.3.1 to Allow Verification of Shape Annealing Matrix Elements Used in Core Protection Calculators ML17311A4341994-11-30030 November 1994 Proposed TS 3/4.4.2,changing Pressurizer Code Safety Valve Lift Setting from 2,500 Psia to 2,475 Psia in LCOs 3.4.2.1 & 3.4.2.2 ML17311A3851994-10-31031 October 1994 Proposed Tech Spec Sections 3.9.6 & 4.9.6.1, Refueling Machine. ML17311A3341994-10-0909 October 1994 Proposed Tech Specs Suspending TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Mode 4 Following Fifth Refueling Outage ML17311A2171994-08-18018 August 1994 Proposed Tech Specs Adding Analytical Method Suppl Entitled, Calculative Methods for CE Large Break LOCA Evaluation Model for Analysis of CE & W Designed Nsss. ML17310B4511994-07-12012 July 1994 Proposed Tech Specs Amend to Add One Action Statement to Table 3.3-3,entry 8 ML17310B4151994-07-0101 July 1994 Proposed Tech Specs Re Reactor Coolant Cold Leg Temperature Vs Core Power Level of TS 3.2.6 ML17310B4331994-06-20020 June 1994 Proposed Tech Specs Sections 5.3.1 & 5.6.1, & New TS Section 3/4.9.13 & Bases 3/4.9.13 ML17310B4091994-06-17017 June 1994 Proposed Tech Specs Removing Five Tables of Component Lists Per GL-91-08 ML17310B1661994-03-28028 March 1994 Proposed Tech Specs Re Min Condensate Storage Tank Indicated Level ML17310B0611994-02-18018 February 1994 Proposed Tech Specs Figure 3.2-1,Section 3/4.1.1.4 & Bases 3/4.1.1.4,establishing Min Temp for Criticality at 545 F for Facilities ML17310B0001994-01-19019 January 1994 Proposed Tech Specs of AF Automatic Actuation Logic Surveillance Frequency Extension ML17310A8361993-11-16016 November 1993 Proposed Tech Specs Table 4.2-4, Min Staffing Requirements for PVNGS Emergencies, in Support of Proposed Rev to Emergency Plan ML17310A7351993-10-26026 October 1993 Proposed Tech Specs Changing Maximum Nominal Enrichment of Fuel Allowed to Be Used in Reactor Core ML17310A6161993-09-0808 September 1993 Proposed Tech Specs Section 6.9.1.10 Re Sys 80 Inletflow Distribution to List of Methods Used to Determine Core Operating Limits ML17310A5211993-08-0505 August 1993 Proposed Tech Specs Requesting to Change Word Pressurizer to RCS for Item #4 in Both Tables 3.3-10 & 4.3-7 ML17310A5151993-08-0505 August 1993 Proposed Tech Specs Changing Surveillance Frequency from Monthly to Quarterly for Channel Functional Tests for RPS & ESFAS Instrumentation ML17310A4211993-06-30030 June 1993 Proposed Tech Specs Requesting Addl Operating Margin in Time Response of Turbine Driven AF Pump to SG Low Level Signal ML17310A2981993-05-20020 May 1993 Proposed TS 4.7.9 Re SR to Ensure Operability of Snubbers ML17306B2671993-01-25025 January 1993 Proposed Tech Specs,Reflecting Revised Train a Kw Value to Be Rejected & Load Designation & Incorporation of Provisions Discussed in 920508 Ltr Re DG Full Load Rejection Testing ML17306B1451992-11-20020 November 1992 Proposed Tech Specs Revising TS 3.2.1 Lhr, & TS 3.2.4, DNBR Margin, Increasing Action from 1 H to 4 H for COLSS Allowed Out of Svc Time Before Requirements Based on More Restrictive Core Protection Calculator Limits Apply ML17306A6491992-04-13013 April 1992 Proposed TS 3.4.8.3 Re RCS - Overpressure Protection Sys ML17306A4731992-02-14014 February 1992 Proposed Tech Specs Re Implementation of Generic Ltr 89-01, Implementation of Programmatic Controls for Radiological Effluent TS in Administrative Controls Section of TS & Relocation of Procedural Details of RETS to Odcm.... ML17306A4031992-01-16016 January 1992 Proposed Tech Specs Amend to TS Section 3.6.3,table 3.6-1 Deleting Type C Testing Requirements for Eight Valves ML17306A3701991-12-30030 December 1991 Proposed Tech Spec Table 6.2-1 Re Min Shift Crew Composition ML17306A3781991-12-30030 December 1991 Proposed Tech Spec Section 3.6.1.7 Re Containment Purge Supply & Exhaust Valves 1999-09-29
[Table view] Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML17300B3791999-10-0808 October 1999 Proposed Tech Specs,Waiving Requirement to Perform SR 3.8.4.8 for Unit 1 Channels A,B & C on One Time Basis ML17300B3521999-09-29029 September 1999 Revised Bases Pages,Providing Addl Discussion of Options Available to Exit Required Action G of TS 3.8.1 & Revised Page for TS 3.3.7 ML17300B3321999-09-14014 September 1999 Marked-up Tech Specs Pages to TS 5.5.2 & 5.6.2,making Noted Administrative Changes ML17313B0601999-08-31031 August 1999 Rev 1 to PVNGS TS Bases Implemented Between Aug 1998 & Jul 1999 ML17313B0081999-07-14014 July 1999 Rev 2 to Inservice Insp Program Summary Manual for PVNGS Unit 1. ML17313A9571999-05-26026 May 1999 Proposed Tech Specs,Reducing Spurious Reactor Trip Hazards Associated with Setpoints While Maintaining Plant Protection ML17313A7511998-12-16016 December 1998 Rev 2 to ISI Program Summary Manual, for PVNGS Unit 3 ML17313A4181998-06-0909 June 1998 Proposed Improved Tech Specs Sections 3.5.1 & 3.5.2,revising Safety Injection tanks-operating & Safety Injection Tanks Shutdown ML17313A1141997-11-0707 November 1997 Improved TS Pages for Section 3.0, LCO & SR Applicability, Section 3.1, Reactivity Control & Section 3.2, Power Distribution Limits. Generic Change to NUREG-1432,Rev 1 Incorporated Into Section 3.0 & 3.1 ML17312B6411997-08-28028 August 1997 Proposed Tech Specs,Allowing one-time Extension of Required Surveillance Interval for Msi Sys Portion Only of ESFAS Logic ML20217Q6801997-08-22022 August 1997 Proposed Tech Specs,Clarifying Wording in TS Bases 3/4.6.1.4, Internal Pressure ML20141H7831997-07-18018 July 1997 Proposed Improved Tech Specs Section 3.8, Electrical Power Sys ML20141H7461997-07-18018 July 1997 Proposed Tech Specs,Providing Addl Info Re Improved TS Section 3.4, Rcs ML17312B0311996-11-0606 November 1996 Proposed Tech Specs 3/4.8.1.1 Re A.C. Sources - Operating ML17300B2651996-06-17017 June 1996 Proposed Tech Specs,Changing Section 1.10 & 3.2.8 & Associated Bases for Obtaining Thyroid Dcfs Used in Definition of Dose Equivalent I-131 ML17312A9451996-05-14014 May 1996 Rev 3 to Significant Condition Investigation. ML17312A6491996-04-0101 April 1996 Proposed Tech Specs,Revising TS 3/4.9.6 to Temporarily Allow Use of Hoist Instead of Refueling Machine for Movement of Fuel Assembly at Core Location A-07 ML17312A6401996-03-26026 March 1996 Proposed Tech Specs 3/4.9.6,increasing Refueling Machine Overload Cut Off Limit to 2,000 Lb,In 50 Lb Increments,For Removal of Stuck Fuel Assembly from Core Location A-06 ML17312A6321996-03-26026 March 1996 Proposed Tech Specs,Revising TS 3/4.9.6 to Relocate Refueling Machine Overload Cut Off Limit from TS 3/4.9.6 to Plant UFSAR Per Criteria in 10CFR50.36 & Rev 1 of NUREG-1432 STS for C-E Plants. ML17312A6371996-03-23023 March 1996 Proposed Tech Specs,Revising TS SR 4.8.2.1.e, DC Sources, to Suspend Provision of TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Entry Into Mode 4 Following Sixth Refueling Outage ML17312A5691996-03-0505 March 1996 Revised Pages to ISI Program Summary Manual ML17312A5011996-01-17017 January 1996 Revised Page 5-1 Changing Section 5.2.2 to Include Description of Material Used for Control Element Assemblies ML17311B3221995-12-20020 December 1995 Proposed Tech Specs,Reducing Setpoint for MSIS & Rt on Low SG Pressure ML17311B3181995-12-20020 December 1995 Revised Pages to ISI Program Summary Manual ML17311B0301995-07-0303 July 1995 Proposed Tech Specs Re Temp Method to Respond to Sustained Degraded Switchyard Voltage ML17311A9771995-06-21021 June 1995 Proposed Tech Specs,Modifying Tables 3.3-4 & 3.3-5 of Section 3/4.3.2 of Esfa Sys Instrumentation ML17311A8651995-05-0202 May 1995 Proposed TS 3.1.2.6,Figure 3.1-1, Min Borated Water Vols, Relocating Elevations That Correspond to Min Required Water Vols for Spent Fuel Pool Into Site Procedures ML17311A8231995-04-18018 April 1995 Proposed Tech Specs Section 3/4.4.4 Re Sleeving Process for SG Tube Repair ML17312A9381995-02-0303 February 1995 Corrective Action Program. ML17311A5631994-12-28028 December 1994 Proposed TS Sections 3.9.6 & 4.9.6.1 Re Refueling Machine ML17311A5021994-12-0707 December 1994 Proposed Tech Specs,Changing Note 5 to Table 4.3-1 of TS 3/4.3.1 to Allow Verification of Shape Annealing Matrix Elements Used in Core Protection Calculators ML17311A4341994-11-30030 November 1994 Proposed TS 3/4.4.2,changing Pressurizer Code Safety Valve Lift Setting from 2,500 Psia to 2,475 Psia in LCOs 3.4.2.1 & 3.4.2.2 ML17311A3851994-10-31031 October 1994 Proposed Tech Spec Sections 3.9.6 & 4.9.6.1, Refueling Machine. ML17311A3341994-10-0909 October 1994 Proposed Tech Specs Suspending TS 4.0.1 & 4.0.4 for Battery Capacity Testing Requirements Until Mode 4 Following Fifth Refueling Outage ML17311A2171994-08-18018 August 1994 Proposed Tech Specs Adding Analytical Method Suppl Entitled, Calculative Methods for CE Large Break LOCA Evaluation Model for Analysis of CE & W Designed Nsss. ML17310B4511994-07-12012 July 1994 Proposed Tech Specs Amend to Add One Action Statement to Table 3.3-3,entry 8 ML17310B4151994-07-0101 July 1994 Proposed Tech Specs Re Reactor Coolant Cold Leg Temperature Vs Core Power Level of TS 3.2.6 ML17310B4331994-06-20020 June 1994 Proposed Tech Specs Sections 5.3.1 & 5.6.1, & New TS Section 3/4.9.13 & Bases 3/4.9.13 ML17310B4091994-06-17017 June 1994 Proposed Tech Specs Removing Five Tables of Component Lists Per GL-91-08 ML17310B1661994-03-28028 March 1994 Proposed Tech Specs Re Min Condensate Storage Tank Indicated Level ML17310B0911994-03-0202 March 1994 SG Tube Insp Plan. ML17310B0771994-02-24024 February 1994 PVNGS Unit 1 Cycle 5 Startup Rept. ML17310B0611994-02-18018 February 1994 Proposed Tech Specs Figure 3.2-1,Section 3/4.1.1.4 & Bases 3/4.1.1.4,establishing Min Temp for Criticality at 545 F for Facilities ML17310B0251994-01-27027 January 1994 Unit 2 Steam Generator Tube Insp Plan Addendum. ML17310B0001994-01-19019 January 1994 Proposed Tech Specs of AF Automatic Actuation Logic Surveillance Frequency Extension ML17310A8361993-11-16016 November 1993 Proposed Tech Specs Table 4.2-4, Min Staffing Requirements for PVNGS Emergencies, in Support of Proposed Rev to Emergency Plan ML17310A7421993-10-27027 October 1993 Revised Unit 1 SG Tube Insp Plan. ML17310A7351993-10-26026 October 1993 Proposed Tech Specs Changing Maximum Nominal Enrichment of Fuel Allowed to Be Used in Reactor Core ML17310A6501993-09-17017 September 1993 Unit 1 SG Tube Insp Plan. ML17310A6161993-09-0808 September 1993 Proposed Tech Specs Section 6.9.1.10 Re Sys 80 Inletflow Distribution to List of Methods Used to Determine Core Operating Limits 1999-09-29
[Table view] |
Text
~0%Ãp rg p ao c)tM Av TM p<Sv pp pg'p(r), ovlp'3Q R fg (m C7 m g INSTRUCT 1EHT 1.GASEOUS RADMASTE SYSTEM a.Noble Gas Activity Monitor-Providing Alarm and Automatic Termination of Release RU-12 b.Flow Rate Monitor CHANNEL SOURCE CHANNEL CHECK CHECK CALIBRATION P(7)R(3)N.A.CHANNEL MODES IN WHICH FUNCTIONAL SURVEILLANCE TEST IS RE UIRED g(1), (2), P)CIAO 8.g, PIIIIII TABLE 4.3-8 RADIOACTIVE GASEOUS EFFLUENT MONITORING INSTRUMEHTATIOH SURVEILLANCE RE UIREHEHTS 2.GASEOUS RADMASTE SYSTEM ENPLOSIVE GAS MONITORING SYSTEM LD a.Oxygen Monitor (Surge tank)0 b.Oxygen Monitor (Maste gas header)0 H.A.H.A.q(4)9(4)M m CD CD 4J C7l TAOLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUENT HOHITORIHG INSTRUHENTATION SURVEILLANCE RE UIREHENTS U INSTRUHEHT 3.CONDENSER EVACUATIOH SYSTEM (RU-141 and RU-142)CHANNEL CIIECK SOURCE CHANNEL CHECK CALIBRATION CHANNEL HODES IH WHICH FUHCTIOHAL SURVEILLANCE TEST IS RE UIRED*a.Noble Gas Activity Monitor'.Iodine Sampler c.Particulate Sampler d.Flow Rate Honitor e.Sampler Flow Rate Heasuring Device D(5)N.A.N.A.D(6)D(6)N.A.N.A.N.A.H.A.N.A.N.A.N (7)R(3)Q(2)H.A.N.A.Q 3 IR IIC 4 4*%*3 IRK*4**3IC 3 A**4***3 A**4IR'A3R 3***4***C)4.PLANT VENT SYSTEH (RU-143 and RU-144)a.Noble Gas Activity Honitor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device D(5)H.A.H.A.D(6)D(6)H.A.H.A.H.A.N.A.N.A.NA.'M ($R(3)Q(2)N.A.N.A.
0
', TABLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUENT MONITORING INSTRUMENTATION SURVEILLANCE RE UIREMEHTS INSTRUMENT 3.CONDEHSER EVACUATIOH SYSTEM (RU-141 and RU-142)a.Hobl e Gas Acti v i ty Moni tor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device 4.PLANT VENT SYSTEM (RU-143 and RU-144)D(5)I M (7)R(3)H.A.N.A.D(6)D(6)N.A.H.A.N.A.N.A.N.A.H.A.CHANNEL SOURCE CHANNEL CHECK CHECK CALIBRATION q(2)H.A.N.A.]2 3k*A 3 A*IIC 1 2 3k**33RIII'A 3)RARA 4*RA O 4m X)R: Q'z 4*)II*Xl 4***Q I 4~~*tTl U m I t:.~M CHANNEL MODES IN NILICH FUNCTIONAL SURVEILLANCE TEST IS RE UI RED a.Noble Gas Activity Monitor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor~e.Sampler Flow Rate Measuring Device D(5)H.A.N.A.D(6)D(6)H.A.H.A.H.A.N.A.H.A.N.A.M ('7)R(3)0(2)N.A.H.A.
h,~
1 TABLE 4.3-8 RADIOACTIVE GASEOUS EFFLUEHT MONITORING IHSTRUMENTATIOH SURVEILLANCE RE UIREMENTS CD ITl INSTRUMENT 1.GASEOUS RADWASTE SYSTEM CkkAHHEL CklECK SOURCE CHANNEL CRECK CALIBRATION CHANNEL MODES IN WkkICkk FUNCTIONAL SURVEILLANCE TEST IS RE UIRED a.Noble Gas Activity Monitor-Providing Alarm and Automatic Termination of Release RU-12 b.Flow Rate Monitor 2.GASEOUS RADWASTE SYSTEM EXPLOSIVE GAS MONITORING SYSTEM LD a.Oxygen Monitor (surge tank)D b.Oxygen Monitor (waste gas header)0 H.A.N.A.g(4)0(4)P(V)R(3)N.A.g(1),(2),P¹¹¹
¹g,P¹¹¹¹A O Z 0 m U I r (m TABLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUENT MONITORING INSTRUMENTATION SURVEILLANCE RE UIREMEHTS c=INSTRUMENT 5.FUEL BUILDING VENTILATION SYSTEM (RU-145 and RU-146)a.Noble Gas Actvity Monitor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor CHANNEL CftECK D(5)H.A.H.A.D(6)N ('EI)R(3)H.A.N.A.N.A.N.A.H.A.SOURCE CHANNEL CIIECK CALIBRATION CHANNEL MODES IH NILICH FUNCTIONAL SURVEILLANCE TEST IS RttSEIEEE Q(2)N.A.H.A.EA I I e.Sampler Flow Rate Measuring Device D(6)N.A.U UJ 1 T 0 I WV e t
~'ONTROLLED BY USE TABLE 4.3-8{Continued)
TABLE NOTATIONS At all times.During GASEOUS RAOWASTE SYSTEM operation.
Whenever the condenser air removal system is in operation, or whenever turbine glands are being supplied with steam from sources other than the auxiliary boiler(s).
During waste gas release.During MODES 1, 2, 3 or 4 or with irradiated fuel in the fuel storage pool.NIP Functional test should consist of, but not be limited to, a verification of system isolation capability by the insertion of a simulated alarm condition.
'1)The CHANNEL FUNCTIONAL TEST shall also demonstr ate that automatic isolation of this pathway occurs if the instrument indicates measured levels above the alarm/trip setpoint.(2)(3)The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm annunciation.occurs if any of the following conditions exists: 1.Instrument indicates measured levels above the alarm setpoint.2.Circuit failure.3.Instrument indicates a downscale failure.4.Instrument controls not set in operate mode.The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards certified by the National Bureau of Standards (NBS)or using standards that have been obtained from suppliers that participate in measurement assurance activities with NBS.These standards shall permit calibrating the system over its intended range of energy and measurement range.For subsequent CHANNEL CALIBRATIOH, sources that have been related to the initial calibration shall be used.(4)The CHANNEL CALIBRATION shall include the use of standard gas samples containing a nominal: 1.One volume percent oxygen, balance nitrogen, and 2.Four volume percent oxygen, balance nitrogen.(6)(7)The channel check for channels in standby verification that the channel is"on-line Daily channel check not required for flow LED may 4a ufillzeot QE%he c.heck Sour ce of increased radio>~+ivi<p'tatus shall consist of and reachable." mon'itors ln standby status.Source in item a'Fa PALO VERDE-UNIT 2 3/4 3-72 AMEHDMEHT HO.23 0~e~~4 q g~~~II\~I I t o a~~4 1~~
TABLE 4.3-8 RADIOACTIVE GASEOUS EFFLUEHT MONITORING INSTRUMENTATION SURVEILLANCE RE UIREMEHTS Ill X7 C7 m IHSTRUMEHT 1.GASEOUS RADMASTE SYSTEM CHANNEL SOURCE CHANNEL CHECK CHECK CALIBRATION CHANNEL FUNCTIONAL TEST MODES IN MHICH SURVEILLANCE IR REIREIRED'R bJ i~2 ,i r~I Ol a.Hoble Gas Activity Monitor-Providing Alarm and Automatic Termination of Release RU-12 ,b.Flow Rate Monitor P GASEOUS RADMASTE SYSTEM EXPLOSIVE GAS MOHITORIHG SYSTEM a.Oxygen Monitot (Surge Tank)0 b.Oxygen Monitor (Maste Gas Header)D N.A.,N.A.Q(4)Q(4)P('7)R(3)H.A.Q(1), (2), PNH'Q, PtI'tItI A 0 Z R XI 0 lg TABLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUENT MONITORING INSTRUMENTATION SURVEILLANCE RE UIREMENTS (m C7 m g IHSTRUMEHT 3.COHDENSER EVACUATION SYSTEM (RU-141 and RU-142)CHANNEL SOURCE CHANNEL CllECK CHECK CALIBRATIOH CHANNEL MODES IH MlICH FUNCTIONAL SURVEILLANCE TEST IS RE VIREO tA I CO 4.'.Noble Gas Activity Monitor b.Iodine Sampler.c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device PLANT VENT SYSTEM (RU-143 and RU-144)a.Noble Gas Activity Monitor b..Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device D(5)H.A.H.A.D(6)D(6)D(5)H.A.H.A.D(6)D(6)H.A.N.A.H.A.H.A.H.A.H.A.M(7)R(3)H.A.H.A.H.A.H.A.N.A.R H.A.R M (7)R(3)Q(2)N.A.H.A.Q(2)N.A.N.A.2 3'A*IIC 3%*Ill 3*III*3**4 3 IR*A'Illa'*A 43L'IR*O I 4*3ll*XI 4*II:*O I 4*~~tTI U m 0)e CD A
TABLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUEHT MONITORING INSTRUMEHTATIOH SURVEILLANCE RE UIREMENTS Q I'D C D DI (m C7 m IHSTRUMEHT 5.FUEL BUILDING VENTILATIOH SYSTEM (RU-145 and RU-146)a.Noble Gas Actvity Monitor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device D(5)D M (7)R(3)H.A.N.A.D(6)D(6)N.A.H.A.N.A.H.A.H.A.H~A.N.PL H.A.CHANNEL MODES IN WHICH CHANNEL SOURCE CHANNEL FUHCTIOHAL SURVEILLANCE CITDCK TIIICK CAIIDAAIIDD.
TDAT.Il AIITIIIAID
~1~O C I'D AD~1 p~'D~,t'~rn C7 rn Itg e'P CONTROLLED BY US/TABLE 4.3-8 (Contin'ued)
TABLE NOTATIONS*At all times.¹(2)(3)During GASEOUS RADWASTE SYSTEM operation.
Whenever the condenser air removal system is in operation, or whenever turbine glands are being supplied with steam from sources other than the auxi 1 iary.boil er (s).During waste gas release.During MODES 1, 2, 3 or 4 or with irradiated fuel in the fuel storage pool.Functional test should consist of, but not'be limited to, a verification of system isolation capability by the insertion of a simulated alarm condition.
The CHANNEL FUNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway occurs if the instrument indicates measured levels above the alarm/trip setpoint.The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm annunciation occurs if any of the following conditions exists: 1.Instrument indicates measured levels above the alarm setpoint.2.Circuit failure.3.Instrument indicates a downscale failure.4.Instrument controls not set in operate mode.The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards certified by the National Bureau of Standards (NBS)or using standards that have been obtained from suppliers that participate in measurement assurance activities with NBS.These standards shall permit calibrating the system over its intended range of energy and measurement range.For subsequent CHANNEL CALIBRATIOH, sources that have been related to the initial calibration shall be used.(4)The CHANNEL CALIBRATIOH shall include the use of standard gas samples containing a nominal: 1.One volume percent oxygen, balance nitrogen, and 2.Four volume percent oxygen, balance nitrogen.(6)(7)The channel check for channels in standby verification that the channel is"on-line Daily channel check not req'uired for flow LEL)may 6e uf)l)Beg>s%he ch<<h'ource aF iricreased raolioackirHf.
status shall consist of and reachable." monitors in standby status.SoqrcQ lO CI8lA nF~PALO VERDE-UNIT 3 3/4 3-72 AMEHDMEHT NO.12 V 4 il~~y~11~,, y,~q 1 s~/I y 4~~1 1~4=h,'l~l e~lf a~I lk U 0 (m TABLE 4.3-8 (Continued)
RADIOACTIVE GASEOUS EFFLUENT MONITORING INSTRUMENTATIOH SURVEILLANCE RE UIREMENTS~~l c=INSTRUMENT 5.FUEL BUILDING VEHTILATIOH SYSTEM (RU-145 and RU-146)CHANNEL SOURCE CHANNEL CHECK CHECK CALIBRATION CHANNEL MODES IH WHICH FUNCTIONAL SURVEILLANCE TE I EE REIEEIREE a.Noble Gas Actvity Monitor b.Iodine Sampler c.Particulate Sampler d.Flow Rate Monitor e.Sampler Flow Rate Measuring Device D(5)N.A.N.A.D(6)D(6)N.A.N.A.H.A.N.A.H.A.H.A.N ('0 R(3)Q(2)N.A.N.A.
+ammol.c c>s'y Us-r~TABLE 4.3-8 (Continued)
TABLE NOTATIONS (2)(3)At all times.During GASEOUS RADWASTE SYSTEM operation.
Whenever the condenser air removal system is in operation, or whenever turbine glands are being supplied with steam from sources other than the auxiliary boiler(s).
During waste gas release.During MODES 1, 2, 3 or 4 or with irradiated fuel in the fuel storage pool.Functional test should consist.of, but'ot be limited to, a verification of system isolation capability by the insertion of a simulated alarm condition.
The CHANNEL FUNCTIONAL TEST shall also demonstrate that automatic isolation of this pathway occurs if the instrument indicates measured levels above the alarm/trip setpoint.The CHANNEL FUNCTIONAL TEST shall also demonstrate that control room alarm annunciation occurs if any of the following conditions exists: 1.Instrument indicates measured levels above the alarm setpoint.2.Circuit failure.3.Instrument indicates a downscale failure.4.Instrument controls not set in operate mode.The initial CHANNEL CALIBRATION shall be performed using one or more of the reference standards certified by the National Bureau of Standards (NBS)or using standards that have been obtained from suppliers that participate in measurement assurance activities with NBS.These standards shall permit calibrating the system over its intended range of energy and measurement range.For subsequent CHANNEL CALIBRATION, sources that have been related to the initial calibration shall be used.(4)The CHANNEL CALIBRATIOH shall include the use of standard gas samples containing a nominal: 1.One volume percent oxygen, balance nitrogen, and 2.Four volume percent oxygen, balance nitrogen.(e)(7)The channel check for channels in standby verification that the channel is".on-line Daily channel check not required for flow i.EZ)~ay he udiliz'ed as%ha check So@roe of>noreased'radloaokivikp status shall consist of and reachable." monitors in standby status.soL{rce.Ill (I'eu of 8 PALO VERDE-UNIT 1 3/4 3"72 AMENDMEHT NO.36
~, t'~I Ib