ML101310324: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 15: Line 15:


=Text=
=Text=
{{#Wiki_filter:ES-401 Name: Date: 04/07/2010 Site-Specific RO Written Examination Cover Sheet U.S. Nuclear Regulatory Commission Site-Specific RO Written Examination Applicant Information Facility/Unit:
{{#Wiki_filter:ES-401                         Site-Specific RO Written Examination                       Form ES-401-7 Cover Sheet U.S. Nuclear Regulatory Commission Site-Specific RO Written Examination Applicant Information Name:
Oconee Form ES-401-7 Region: IDIIIg] III D IV D Reactor Type: W D CE D BW GE D Start Time: Finish Time: Instructions Use the answer sheets provided to document your answers. Staple this cover sheet on top of the answer sheets. To pass the examination, you must achieve a final grade of at least 80.00 percent. Examination papers will be collected 6 hours after the examination begins. Applicant Certification All work done on this examination is my own. I have neither given nor received aid. Applicant's Signature Results Examination Value 75 Points Applicant's Score Points Applicant's Grade Percent 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 1 Unit 1 plant conditions:
Date: 04/07/2010                                      Facility/Unit: Oconee Region:           I El II IDIIIg]             El IIIIII D IV El D         Reactor Type: W     DEl CE D El BW ~ GE D   El Start Time:                                           Finish Time:
* Reactor power = 100%
Instructions Use the answer sheets provided to document your answers. Staple this cover sheet on top of the answer sheets. To pass the examination, you must achieve a final grade of at least 80.00 percent. Examination papers will be collected 6 hours after the examination begins.
* 1 RC-66 (PORV) is leaking past its seat
Applicant Certification All work done on this examination is my own. II have neither given nor received aid.
* Pressurizer temperature  
Applicants Applicant's Signature Results Examination Value                                                                     75       Points Applicants Applicant's Score                                                                               Points Applicants Applicant's Grade                                                                             Percent
= 648 of
 
* Quench tank pressure = 5 psig Based on the above conditions, which ONE of the following describes the expected tailpipe temperature
NRC REACTOR OPERATOR 2010A NRC 2010A                    OPERATOR EXAM EXAM I1 POINT Question I1 Unit 1 Unit   I plant conditions:
("F) downstream of 1 RC-66? A. 162 B. 228 C. 272 D. 648 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 2 Unit 1 plant conditions:
* Reactor power == 100%100%
* I1RC-66 (PORV) is leaking past its seat
* Pressurizer temperature == 648 °F  of pressure ==55 psig
* Quench tank pressure           psig Based on the above conditions, which ONE of the following describes the expected Based
("F) downstream of I1RC-66?
tailpipe temperature (°F)
A. 162162 B. 228 C. 272 D. 648
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 2 Unit 1I plant conditions:
* Reactor Trip
* Reactor Trip
* SBLOCA has occurred
* SBLOCA has occurred
* Rule 2 (Loss of SCM) in progress
* Rule 2 (Loss of SCM) in progress
* 1 A & 1 B Steam Generator levels = 78" XSUR increasing
* 1 1A A&1 B Steam Generator levels =
* Cooldown rate = 65°F / Y:zhr Based on the above conditions, which ONE of the following describes  
lB                          78 XSUR increasing
... (1 ) why SG levels are being increased?
                                          = 78"
AND (2) how EFDW flows will be controlled in accordance with Rule 2? A. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits B. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase C. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits D. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 3 Unit 1 plant conditions:
                        =
* Reactor trip from 100% power
* Cooldown rate = 65°F I/ Y:zhr
* RCS pressure = 88 psig decreasing
                                  %hr Based on the above conditions, which ONE of the following describes describes...
* Reactor Building pressure = 27 psig increasing
                                                                      ...
* 1 B LPI Pump failed to start Based on the above conditions, which ONE of the following describes the guidance provided in EOP Enclosure 5.1 (ES Actuation) regarding the LPI pumps and system operation?
(1)) why SG levels are being increased?
EOP Enclosure 5.1 (ES Actuation)  
(1 AND (2) how EFDW flows will be controlled in accordance with Rule 2?
.... A. directs continued operation with only the 1 A LPI pump and no re-alignment of LPI header flows B. directs continued operation with only the 1 A LPI pump and manually re-aligns LPI flow down both the 1 A and 1 B LPI headers C. utilizes the 1 A and the 1 C LPI Pump and aligns flow down both headers with 1 LP-9 and 10 closed D. utilizes only the 1 C LPI Pump and aligns flow down both headers with 1 LP-9 & 10 open 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 4 Unit 1 plant conditions:
A. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits B. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase C. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits D. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase
* Reactor power = 100%
 
* 1 T A and 1 TB de-energized Based on the above conditions, which ONE of the following indicates the Thot and Tcold values expected approximately 15 minutes after the Reactor trip? Thot would be approximately
2010A NRC REACTOR OPERATOR EXAM 2010A NRC                            EXAM I1 POINT POINT Question 33 Unit 11 plant conditions:
___ oF and Tcold would be approximately
* Reactor trip from 100%100% power
___ oF. A. 534 / 532 B. 570 / 540 C. 556 / 554 D. 585 / 555 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 5 Unit 1 initial conditions:
* RCS pressure == 88 psig decreasing decreasing Building pressure == 27
* Reactor in MODE 5
* Reactor Building                   27 psig increasing
* RCS pressure = 0 psig
* 11BB LPI Pump failed to start Based onon the above conditions, which ONE of the following describes the guidance guidance provided in EOP Enclosure 5.1 (ES Actuation) regarding the LPI pumps and system operation?
* Normal LPI decay heat removal in service
FOP Enclosure 5.1 (ES Actuation)....
* 1 C LPI pump operating
EOP                        Actuation) ....
* Unit Blackout occurs Current conditions:
A. directs continued operation with only the 1   A LPI pump and no re-alignment of LPI IA header flows B. directs continued operation with only the 1   A LPI pump and manually re-aligns LPI IA flow down both the 11A        1 B LPI headers A and 1 C. utilizes the 1A and the 1 1A          1C C LPI Pump and aligns flow down both headers with 1 1LP-9 LP-9 and 10 closed D. utilizes only the 11 C LPI Pump and aligns flow down both headers with 1I LP-9 & 10 open
* MFB's re-energized from CT-5 Based on the above conditions, which ONE of the following describes actions required by AP/26 (Loss of Decay heat Removal)?
 
A. Start 1 C LPI pump AND initiate AP/11 (Recovery from Loss of Power) B. Start 1 C LPI pump AND initiate the Blackout tab of the EOP C. Feed and steam SG's to maintain CETC < 246&deg;F AND initiate AP/11 (Recovery from Loss of Power) D. Feed and steam SG's to maintain CETC < 246&deg;F AND perform AP/26 Encl. 5.6 (Venting LPI Pumps and Suction Lines) 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 6 Unit 1 plant conditions:
2010A NRC REACTOR OPERATOR EXAM 1
* Reactor trip has just occurred
I POINT Question 4 Unit 1I plant conditions:
* Total RCP seal injection flow = 0 gpm
* Reactor power =    = 100%
* Component Cooling is unavailable Based on the above conditions, which ONE of the following describes the procedure whose performance is directed by the EOP and why? Initiate ... A. AP/20 (Loss of CC) to restore Component Cooling B. AP/20 (Loss of CC) to ensure letdown is isolated C. AP/25 (SSF EOP) to align an alternate letdown flowpath D. AP/25 (SSF EOP) to align an alternate source of seal injection 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 7 Unit 1 initial conditions:
* 1ITATA and 1ITB TB de-energized Based on the above conditions, which ONE of the following indicates the Thot and Tcold values expected approximately 15 minutes after the Reactor trip?
* Reactor power = 90%
Thot would be approximately _ _ _ oF and Tcold would be approximately _ _ _ oF.
* 1 B Main Feedwater pump trips Current conditions:
A. 534 / 532 B. 570 / 540 C. 556 / 554 D. 585 /I 555
* Reactor power = 70% decreasing
 
* RCS pressure = 2165 psig slowly decreasing
2010A NRC REACTOR OPERATOR 2010A NRC                OPERATOR EXAM EXAM I1 POINT Question 55 Unit I1 initial initial conditions:
* Pressurizer level = 228 inches slowly decreasing
* Reactor in MODE 55
* Pressurizer temperature  
* RCS pressure == 00 psig Normal LPI decay
= 640&deg;F slowly decreasing
* Normal         decay heat          in service heat removal in
* Pressurizer heater bank 1 (Group A and K) is ON
* 1C        pump operating 1C LPI pump Blackout occurs
* Pressurizer heater banks 2, 3, and 4 are in AUTO and are OFF Based on the above conditions, which ONE of the following describes the status of the pressurizer and the pressurizer saturation circuit? The pressurizer is ____ AND the pressurizer saturation circuit ___ _ A. subcooled  
* Unit Blackout Current conditions:
/ is responding as expected B. subcooled  
MFBs re-energized from CT-5
/ has failed C. saturated  
* MFB's Based on the above conditions, which ONE of the following describes actions required AP/26 (Loss of Decay heat Removal)?
/ is responding as expected D. saturated  
by AP126 A. Start 1 IC                        AP/11I (Recovery from Loss of Power)
/ has failed 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 8 Unit 2 initial conditions:
C LPI pump AND initiate AP/l B. Start 1 1 C LPI pump AND initiate the Blackout tab of the EOP C. Feed and steam SG's SCs to maintain CETC <   246&deg;F AND initiate AP/l
* Time = 1200:00
                                                <246&deg;F              AP/111 (Recovery from Loss of Power)
* Reactor power = 100%
D.
D. Feed and steam SG's SGs to maintain CETC <   246&deg;F AND perform AP/26 Encl.
                                                <246&deg;F                      End. 5.6 (Venting LPI Pumps and Suction Lines)
 
2010A NRC 2010A     NRC REACTOR        OPERATOR EXAM REACTOR OPERATOR           EXAM I1 POINT POINT Question 66 Question Unit I1 plant Unit   plant conditions:
Reactor trip
* Reactor   trip has just occurred has just  occurred Total RCP
* Total   RCP seal               flow ==00 gpm injection flow seal injection            gpm Cooling is Component Cooling
* Component                 is unavailable unavailable Based on Based    on the the above conditions, which ONE ONE of                  describes the procedure of the following describes performance is whose performance       is directed directed by the EOP and  and why?
Initiate ...
Initiate...
AP/20 (Loss of CC) to restore Component Cooling A. API2O AP/20 (Loss of B. API2O          of CC)
CC) to to ensure ensure letdown letdown is is isolated isolated C. AP/25 (SSF EOP) to align an alternate letdown flowpath AP/25 (SSF EOP) to align an alternate source of seal injection D. AP125
 
2010A NRC 2010A          REACTOR OPERATOR NRC REACTOR        OPERATOR EXAM EXAM I1 POINT POINT Question 77 Question Unit 11 initial Unit   initial conditions:
conditions:
* Reactor       power ==90%
Reactor power        90%
* 11BB MainMain Feedwater    pump trips Feedwater pump     trips conditions:
Current conditions:
* Reactor power == 70% decreasing decreasing
* RCS pressure == 2165 psig    psig slowly slowly decreasing decreasing
* Pressurizer level level == 228 inches slowly slowly decreasing decreasing temperature ==640&deg;
* Pressurizer temperature           640&deg;F  slowly decreasing F slowly decreasing
* Pressurizer heaterheater bank 1 I (Group A and K) is ONON
* Pressurizer heater banks 2, 3, and      and 4 are in AUTO and are OFF Based on the aboveabove conditions, which ONE                     describes the status of the ONE of the following describes pressurizer and the pressurizer saturation circuit?
The pressurizer is _ _ _ _ AND the pressurizer saturation circuit _ _ __
A. subcooled I/ is responding as expected B. subcooled I/ has failed C. saturated I/ is responding as expected D. saturated /I has failed
 
2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 8 Unit 2 initial conditions:
* Time = 1200:00
* Reactor power = 100%
* Both MFDW Pumps tripped Current conditions:
* Both MFDW Pumps tripped Current conditions:
* Time = 1201 :45
* Time = 1201 :45
* Reactor power = 30% decreasing
* Reactor power =    = 30% decreasing
* Loop A SCM = O&deg;F stable
* Loop A SCM = O&deg;F  0&deg;F stable
* Rule 1 (ATWS/Unanticipated Nuclear Power Production) in progress
* Rule 1 (ATWS/Unanticipated Nuclear Power Production) in progress
* 2SA9/D2 (RC Pump Vibration High) Actuated
* 2SA9/D2 (RC Pump Vibration High)High ) Actuated
* Rule 2 (Loss of SCM) initiated Based on the above conditions, which ONE of the following describes the required actions regarding Reactor Coolant Pumps (RCP's) and the reason for those actions? A. Leave RCP's operating to minimize core damage from an increase in DNBR that would occur if secured B. Leave RCP's operating to provide flow through the core for heat removal C. Secure RCP's to reduce the amount of RCS inventory lost D. Secure RCP's before the RCS can evolve to a Void fraction of> 70%
* Rule 2 (Loss of SCM) initiated Based on the above conditions, which ONE of the following describes the required (RCPs) and the reason for those actions?
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 9 Unit 1 plant conditions:
actions regarding Reactor Coolant Pumps (RCP's)
A. Leave RCP's RCPs operating to minimize core damage from an increase in DNBR that would occur if secured RCPs operating to provide flow through the core for heat removal B. Leave RCP's C. Secure RCP's RCPs to reduce the amount of RCS inventory lost D. Secure RCP's RCPs before the RCS can evolve to a Void fraction of> 70%
 
2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 9 Unit 11 plant conditions:
* SGTR tab in progress
* SGTR tab in progress
* 1 B SG isolated
* 1    SC isolated 1 B SG
* 1A loop Tcold = 440&deg;F decreasing
* 1A loop Tcold = 440&deg;F decreasing
* 1B S/G TUBE/SHELL DT = (-)72&deg;F Based on the above conditions, which ONE of the following describes:
* 1B   SIG TUBE/SHELL DT =
(1) the reason the SGTR tab directs minimizing core SCM during cooldown AND (2) the initial method used to reduce the SCM? To reduce the _--l(....:,1J,..)
lB S/G                          = (-)72&deg;F Based on the above conditions, which ONE of the following describes:
_ AND reducing SCM would initially be attempted by _-,,(2=..)<---,-
(1) the reason the SGTR tab directs minimizing core SCM during cooldown AND (2) the initial method used to reduce the SCM?
A. primary to secondary leak rate / de-energizing Pzr heaters and cycling Pzr spray B. primary to secondary leak rate / cycling the PORV C. compressive stresses in the 1 B SG / de-energizing Pzr heaters and cycling Pzr spray D. compressive stresses in the 1 B SG / cycling the PORV 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 10 Unit 1 plant conditions:
To reduce the _--l(....:,1J,..)
* Both MFB's de-energized
(1) _                                                             (2)
* TDEFWP operating Based on the above conditions, which ONE of the following describes the status of bearing oil cooling water supply to the TDEFWP? TDEFWP bearing oil cooling is currently provided by and it ___ _ provide adequate cooling water flow until AC power has been re-established.
AND reducing SCM would initially be attempted by _-,,(2=..)<---,-
A. CCW / will B. HPSW / will C. CCW / will NOT D. HPSW / will NOT 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 11 Unit 1 initial conditions:
A. primary to secondary leak rate /I de-energizing Pzr heaters and cycling Pzr spray B. primary to secondary leak rate /I cycling the PORV C. compressive stresses in the 1       I B SG SC / de-energizing Pzr heaters and cycling Pzr spray D. compressive stresses in the 1       lB  SC /I cycling the PORV B SG
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 10 1 plant conditions:
Unit 1
* Both MFB's MFBs de-energized
* TDEFWP operating Based on the above conditions, which ONE of the following describes the status of bearing oil cooling water supply to the TDEFWP?
TDEFWP bearing oil cooling is currently provided by           and it _ _ __
provide adequate cooling water flow until AC power has been re-established.
A. CCW I/ will B. HPSW /I will C. CCW /I will NOT D. HPSW /I will NOT
 
NRC REACTOR OPERATOR 2010A NRC 2010A                  OPERATOR EXAM EXAM I1 POINT POINT Question II  11 Unit 1 1 initial conditions:
* Station Blackout occurred
* Station Blackout occurred
* Neither KHU automatically started
* Neither KHU automatically started Start of BOTH KHUs Emergency Start Manual Emergency
* Manual Emergency Start of BOTH KHU's is required Time = 1201
* Manual                                         is required KHU's is Time == 1201 1201 switch placed in START Emergency Start Channel A control room switch
* Keowee Emergency Start Channel A control room switch placed in START Time = 1202
* Keowee Emergency Time = 1202 1202
* Keowee Emergency Start Channel B control room switch placed in START Based on the above conditions, which ONE of the following describes the time at which BOTH KHU's have received an Emergency Start signal AND the Generator Output Voltage (KV) of the KHU's that would indicate proper operation?
* Keowee Emergency Start Channel B        B control room switch placed in START Based on the above conditions, which ONE of the following describes the time at which KHUs have received an Emergency Start signal AND the Generator Output BOTH KHU's KHUs that would indicate proper operation?
A. 1201 I 13.8 B. 1202 I 13.8 C. 1201 I 4.16 D. 1202 I 4.16 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 12 Which ONE of the following would indicate that the 2DIC inverter has experienced a loss of AC output voltage AND how 2KVIC panelboard would then receive power? A. LOAD CONNECTED TO EMERGENCY light on the inverter will be illuminated AND panelboard 2KVIC will automatically be energized from panelboard 2KRA (regulated power). B. LOAD CONNECTED TO EMERGENCY light on the inverter will be illuminated AND panelboard 2KVIC will automatically be energized from Unit 3. C. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panel board will be de-energized until manually aligned to panelboard 2KRA (regulated power). D. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panelboard will be de-energized until manually aligned to receive power from Unit 3.
Voltage (KV) of the KHU's 1201 I 13.8 A. 1201 B. 1202 I 13.8 1201 I 4.16 C. 1201 1202 I/ 4.16 D. 1202
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 13 Plant conditions:
 
* 1 CA Battery Charger fails -output voltage = 0 VDC
NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I POINT 1
* 1 CA Battery voltage = 126 VDC
Question 1212 has experienced aa Which ONE of the following would indicate that the 2DIC inverter has panelboard would then receive power?
* 1 DCB Bus voltage = 123 VDC
loss of AC output voltage AND how 2KVIC panelboard loss LOAD CONNECTED TO A. LOAD                     EMERGENCY light on the inverter will be illuminated TO EMERGENCY                                illuminated AND panelboard 2KVIC will automatically be panelboard                            be energized from panelboard 2KRA (regulated power).
* Unit 2 DCAlDCB Bus voltage = 124 VDC
B. LOAD CONNECTED TO EMERGENCY light on the inverter will be illuminated AND panelboard 2KVIC will automatically be energized from Unit 3.
* Unit 3 DCAlDCB Bus voltage = 127 VDC Based on the above conditions, which ONE of the following will automatically supply power to 1 DIA panelboard?
C. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panelboard panel                           until manually aligned to panelboard 2KRA board will be de-energized until (regulated power).
A. 1DCB Bus B. 1 CA Battery C. Unit 2 DC Bus D. Unit 3 DC Bus 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 14 Unit 1 and 2 initial conditions:
D. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panelboard will be de-energized until manually aligned to receive power from Unit 3.
 
2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 13 Plant conditions:
* 1 CA Battery Charger fails - output voltage =
1                          -                = 0 VDC
* 1I CA Battery voltage =
                          = 126 VDC
* 11 DCB Bus voltage   = 123 VDC
                          =
* DCA/DCB Bus voltage =
Unit 2 DCAlDCB                 = 124 VDC
* DCA/DCB Bus voltage =
Unit 3 DCAlDCB                 = 127 VDC Based on the above conditions, which ONE of the following will automatically supply power to 11 DIA panelboard?
A. 1DCB Bus B. 11CA CA Battery C. Unit 2 DC Bus D. Unit 3 DC Bus
 
2010A NRC REACTOR OPERATOR EXAM 11 POINT Question 14 I and 2 initial conditions:
Unit 1
* A and B LPSW pump operating Current conditions:
* A and B LPSW pump operating Current conditions:
* 1 SA9/A9 (LPSW HEADER A PRESS LOW)
* 1 ISA9/A9 SA9/A9 (LPSW HEADER A PRESS LOW)
* A LPSW pump amps = 15 -35 fluctuating
* A LPSW pump amps = 15 - 35 fluctuating
* B LPSW pump amps = 55 stable
                                    -
* LPSW HDR PRESS = rapidly fluctuating between 60 & 75 psig Based on current conditions, which ONE of the following describes the status of the LPSW pumps and what actions are directed by AP/24 (Loss of LPSW)? A. The A LPSW pump is cavitating 1 Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW PumpC B. The A LPSW pump has a sheared shaft 1 Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW Pump C C. The A LPSW pump is cavitating 1 Start LPSW Pump C then stop LPSW Pump A D. The A LPSW pump has a sheared shaft 1 Start LPSW Pump C then stop LPSW Pump A 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 15 Unit 3 initial conditions:
* B LPSW pump amps =        = 55 stable
* Time = 1200
* LPSW HDR PRESS =        = rapidly fluctuating between 60 & & 75 psig Based on current conditions, which ONE of the following describes the status of the LPSW pumps and what actions are directed by AP/24 (Loss of LPSW)?
* Reactor power = 45% stable
A. The A LPSW pump is cavitating 1/ Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW Pump C PumpC B. The A LPSW pump has a sheared shaft 1         I Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW Pump C C. The A LPSW pump is cavitating 1     / Start LPSW Pump C then stop LPSW Pump A D. The A LPSW pump has a sheared shaft 1       I Start LPSW Pump C then stop LPSW Pump A
* Operating Main Feedwater Pump trips
 
2010A NRC REACTOR OPERATOR EXAM 2010A NRC                    EXAM 1 POINT 1 POINT Question 15  15 Unit 33 initial Unit    initial conditions:
* Time=1200 Time = 1200
* Reactor power == 45% stable
* Operating Main  Main Feedwater Pump trips
* IA and AlA are lost to 3FDW-315 Current conditions:
* IA and AlA are lost to 3FDW-315 Current conditions:
* Time = 1300
Time=1300
* RCS Tave = 550&deg;F stable Based on the above conditions, which ONE of the following describes the expected SG level and the status of 3FDW-315?
* Time       = 1300
ASSUME NO OPERATOR ACTIONS HAVE OCCURRED A. 25" Stu level/failed open B. 25" Stu level/controlling SG level at setpoint C. 30" XSUR / failed open D. 30" XSUR / controlling SG level at setpoint 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 16 Unit 1 plant conditions:
* RCS Tave =      = 550&deg;F stable Based on the above conditions, which ONE of the following describes the expected SG level and the status of 3FDW-315?
* Reactor power = 50% stable
ASSUME NO OPERATOR ACTIONS HAVE OCCURRED A. 25" 25 Stu s/u level/failed level I failed open B. 25 25" Stu     level I controlling SG level at setpoint s/U level/controlling C. 30" 30 XSUR / failed open 30 XSUR I/ controlling SG D. 30"                          Sc level at setpoint
* Units 2 and 3 in MODE 5
 
* AP/34 (Degraded Grid) in progress due to grid disturbance
2010A NRC REACTOR OPERATOR EXAM 2010A NRC                                  EXAM I1 POINT POINT Question 1616 1 plant conditions:
* BOTH KHU's generating to the grid
Unit 1
* All but ONE of the Offsite Sources required by Tech Spec 3.8.1 (AC Operating) are lost Based on the above conditions which ONE of the following describes  
* Reactor power == 50% stable
... 1) actions required by Tech Spec 3.8.1 ? AND 2) a condition that would require manually separating BOTH KHU's from the electrical grid in accordance with AP/34? A. Immediately enter Tech Spec LCO 3.0.3 I KHU High Generator Output Voltage B. Immediately enter Tech Spec LCO 3.0.3 I KHU Low Generator Output Voltage C. Energize BOTH Standby Busses within one hour I KHU High Generator Output Voltage D. Energize BOTH Standby Busses within one hour I KHU Low Generator Output Voltage 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 17 Unit 1 initial conditions:
* Units 2 and 33 in MODE 55 AP/34 (Degraded Grid)
* Reactor power = 100%
* AP134                      in progress due Grid) in              due to grid disturbance disturbance
* 1 C HPI pump OOS Current conditions:
* BOTH     KHU's generating to BOTH KHUs                  to the grid grid
* 1 A and 1 B Main FDW pumps tripped
* All but ONE of the Offsite Sources required by Tech Spec 3.8.1 (AC Sources-Operating) are lost Based on the above conditions which ONE of the following describes ...
: 1) actions required byTech
: 1)                                  3.8.1 ?
Spec3.8.1 by Tech Spec AND
: 2) a condition that would require manually separating BOTH KHUs  KHU's from the electrical grid in accordance with AP/34?
A. Immediately enter Tech Spec LCO 3.0.3 I/ KHU High Generator Output Voltage B. Immediately enter Tech Spec LCO 3.0.3 I/ KHU Low Generator Output Voltage C. Energize BOTH Standby Busses within one hour I/ KHU High Generator Output Voltage D. Energize BOTH Standby Busses within one hour I/ KHU Low Generator Output Voltage
 
2010A 2010A NRC              OPERATOR EXAM NRC REACTOR OPERATOR           EXAM 11 POINT POINT Question 17  17 Unit 11 initial conditions:
* Reactor power == 100%  100%
* lCHPlpumpOOS 1C HPI pump OOS Current conditions:
* 1A  1A and lB    Main FDW pumps tripped 1B Main
* Condensate Booster Pumps unavailable
* Condensate Booster Pumps unavailable
* All EFDW pumps unavailable
* All EFDW pumps unavailable
* 1 A and 1 B SG Outlet pressure = 860 psig slowly decreasing
* 1 1AA and 1 B SG Outlet pressure == 860 psig slowly decreasing lB
* RCS pressure = 2317 psig increasing Based on the above conditions, which ONE of the following describes the required operator action(s) in accordance with the EOP? A. Establish SSF ASW flow to the SG and establish SG levels at 240 inches. B. Establish SSF ASW flow to the SG and do NOT establish a level in the SGs. C. Establish HPI forced cooling and open 1 HP-41 O. D. Establish HPI forced cooling and open 1 HP-409.
* RCS pressure == 2317 psig increasing Based on the above conditions, which ONE of the following describes describes the required operator action(s) in accordance with the EOP?
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 18 Unit 1 initial conditions:
A. Establish SSF ASW flow to the SG and establish SG levels at 240 inches.
* Reactor power = 100%
B. Establish SSF ASW flow to the SG and do NOT establish a level in the SGs.
* 1 A MSLB occurs Current conditions:
SG5.
C. Establish HPI forced cooling and open 1   IHP-410.
HP-41 O.
D. Establish HPI forced cooling and open 1IHP-409.
HP-409.
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 18 Unit 1I initial conditions:
* Reactor power =      = 100%
* 1   lAMSLBoccurs A MSLB occurs Current conditions:
* Reactor has tripped
* Reactor has tripped
* RCS Tave = 544&deg;F slowly increasing
* RCS Tave =        544T slowly increasing
* 1 A SG Pressure = 0 psig
                    = 544&deg;F
* 1 B SG Pressure = 990 psig slowly increasing
* 1   1A A SG Pressure = 0 psig
* 11 B SG Pressure =    = 990 psig slowly increasing
* Turbine bypass valves in Auto
* Turbine bypass valves in Auto
* Reactor Building pressure = 0.2 psig stable Based on the above conditions, which ONE of the following describes the status of the TDEFWP and how subsequent operation of the TDEFWP would be performed?
* Reactor Building pressure =      = 0.2 psig stable Based on the above conditions, which ONE of the following describes the status of the TDEFWP and how subsequent operation of the TDEFWP would be performed?
TDEFWP is ... A. operating and can be secured with TDEFWP control switch before AFIS is reset B. operating and can be secured with TDEFWP control switch ONLY after AFIS is reset C. NOT operating and can be started with TDEFWP control switch before AFIS is reset D. NOT operating and can be started with TDEFWP control switch ONLY after AFIS is reset 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 19 Unit 1 plant conditions:
TDEFWP is   is...
* Reactor power = 70% stable
              ...
* Pressurizer level = 210" slowly decreasing
A. operating and can be secured with TDEFWP control switch before AFIS is reset B. operating and can be secured with TDEFWP control switch ONLY after AFIS is reset C. NOT operating and can be started with TDEFWP control switch before AFIS is reset D. NOT operating and can be started with TDEFWP control switch ONLY after AFIS is reset
* 1HP-120 (RC VOLUME CONTROL) failed closed
 
* AP/14 (Loss of Normal HPI Makeup and/or RCP Seal Injection) initiated Based on the above conditions, which ONE of the following describes the initial actions required to control Pressurizer level AND the minimum allowed Pressurizer level (inches) in accordance with AP/14? Throttle ... A. 1 HP-26 / 200 B. 1 HP-26 / 80 C. 1 HP-122 (RC VOLUME CONTROL BYPASS) / 200 D. 1 HP-122 (RC VOLUME CONTROL BYPASS / 80 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 20 Unit 1 initial conditions:
2010A NRC 2010A                        OPERATOR EXAM REACTOR OPERATOR NRC REACTOR                      EXAM I1 POINT POINT Question 19 Question    19 Unit 11 plant Unit   plant conditions:
* Reactor power         70% stable power == 70%   stable level == 210
* Pressurizer level             slowly decreasing 210" slowly decreasing
* I1HP-120         VOLUME CONTROL)
(RC VOLUME HP-i 20 (RC                              failed closed CONTROL) failed AP/14 (Loss of
* AP/i4              Normal HPI of Normal        Makeup and/or RCP HPI Makeup            RCP Seal  Injection) initiated Seal Injection) initiated Based on Based  on the above conditions, which ONE  ONE of   the following describes of the                           initial actions describes the initial required toto control control Pressurizer         AND the minimum allowed Pressurizer level level AND Pressurizer level                                                level in accordance with AP/i4?
(inches) in                     AP/14?
Throttle ...
Throttle...
1HP-26 I/ 200 A. 1HP-26       200 B. 1 HP-26 I/ 80 1HP-26 C. 1 HP-122 (RC VOLUME CONTROL BYPASS) I/ 200 IHP-i22(RC D. 1 HP-i 22 (RC VOLUME CONTROL BYPASS I/ 80 1 HP-122
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 20 I initial conditions:
Unit 1
* Reactor in MODE 6 Current conditions:
* Reactor in MODE 6 Current conditions:
* Fuel Transfer Canal level decreasing
* Fuel Transfer Canal level decreasing
Line 140: Line 247:
* West fuel carriage is in the SFP and empty
* West fuel carriage is in the SFP and empty
* Reactor Building Main Fuel Bridge in transit to the upender with a spent fuel assembly in the mast
* Reactor Building Main Fuel Bridge in transit to the upender with a spent fuel assembly in the mast
* Section 40 (Fuel Transfer Canal Flooded) of AP/26 (Loss of Decay Heat Removal) initiated Based on the conditions above, which ONE of the following describes the first actions required to be taken in accordance with Section 40 (Fuel Transfer Canal Flooded)?
* Section 40 4D (Fuel Transfer Canal Flooded) of AP126 AP/26 (Loss of Decay Heat Removal) initiated fit actions Based on the conditions above, which ONE of the following describes the first required to be taken in accordance with Section 40 4D (Fuel Transfer Canal Flooded)?
A. Close 1 SF-1 and 1 SF-2 (East/West Transfer Tube Isolations)
A. Close 1 I SF-1 SF-i and 1I SF-2 (East/West Transfer Tube Isolations)
B. Verify SF system aligned for refueling cooling mode and stop 2B SF cooling pump C. Place the fuel assembly into the East Upender and position the West Fuel Carriage to the RB D. Place the fuel assembly into the East Upender and position the East Fuel Carriage to the SFP 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 21 Which ONE of the following describes conditions that indicate RIA-54 is unable to perform its function AND if batch releases are allowed while the RIA is inoperable?
B. Verify SF system aligned for refueling cooling mode and stop 2B SF cooling pump C. Place the fuel assembly into the East Upender and position the West Fuel Carriage to the RB D. Place the fuel assembly into the East Upender and position the East Fuel Carriage to the SFP
A. Counts do not increase when Source Check is performed I Batch releases are allowed. B. Counts do not increase when Source Check is performed I Batch releases are NOT allowed. C. Sample pump found OFF I Batch releases are allowed. D. Sample pump found OFF I Batch releases are NOT allowed.
 
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 22 Unit 2 plant conditions:
2010A NRC 2010A                      OPERATOR EXAM REACTOR OPERATOR NRC REACTOR                      EXAM 11 POINT POINT Question 21 Question    21 Which ONE Which   ONE of of the                      conditions that describes conditions the following describes                     indicate RIA-54 that indicate RIA-54 is unable to is unable to perform its perform its function function AND             releases are batch releases AND ifif batch                allowed while are allowed             RIA is while the RIA is inoperable?
inoperable?
A. Counts A. Counts dodo not not increase increase when   Source Check when Source    Check is   performed II Batch is performed            releases are Batch releases   are allowed.
allowed.
B. Counts B. Counts dodo not  increase when not increase   when Source   Check is Source Check        performed I Batch releases are is performed                      are NOT NOT allowed.
allowed.
C. Sample pumppump found OFF         Batch releases are allowed.
OFF I Batch Sample pump found OFF I Batch releases are NOT D. Sample D.                                                          NOT allowed.
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 22 Unit 2 plant conditions:
* 3 of the 5 fire detectors in the West penetration room will be simultaneously removed for repair and/or replacement Based on the above conditions, which ONE of the following describes the compensatory actions required by SLC 16.9.6 (Fire Detection Instrumentation)?
* 3 of the 5 fire detectors in the West penetration room will be simultaneously removed for repair and/or replacement Based on the above conditions, which ONE of the following describes the compensatory actions required by SLC 16.9.6 (Fire Detection Instrumentation)?
Within 1 hour of removing the detectors  
Within 1                      detectors....
.... A. Perform Channel Functional Test on remaining fire detectors ONLY B. Establish a fire watch ONLY C. Perform Channel Functional Test on remaining fire detectors AND stage 4 additional fire extinguishers in the West Penetration Room. D. Establish a fire watch AND stage 4 additional fire extinguishers in the West Penetration Room.
1 hour of removing the detectors ....
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 23 Unit 3 plant conditions:
A. Perform Channel Functional Test on remaining fire detectors ONLY B. Establish a fire watch ONLY C. Perform Channel Functional Test on remaining fire detectors AND stage 4 additional fire extinguishers in the West Penetration Room.
* Loop A and Loop 8 SCM's = oaF stable
D. Establish a fire watch AND stage 4 additional fire extinguishers in the West Penetration Room.
* Core SCM = (_)5 a F flashing with a red background Based on the above conditions, which ONE of the following describes the status of the reactor core? A. saturated and covered B. saturated and partially uncovered C. superheated and covered D. superheated and partially uncovered 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 24 Unit 2 initial conditions:
 
* Reactor power = 100% Current conditions:
NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I POINT 1
Question 23 Unit 33 plant conditions:
* Loop A and Loop B        SCM's == 0&deg;F 8 SCMs    oaF stable a
* Core SCM == (-)5&deg;F
(_)5 F flashing with a red background Based on the above conditions, which ONE of the following describes the status of the reactor core?
A. saturated and covered B. saturated and partially uncovered C. superheated and covered D. superheated and partially uncovered
 
2010A NRC REACTOR OPERATOR EXAM 1
I POINT Question 24 Unit 2 initial conditions:
* Reactor power =    = 100%
Current conditions:
* 2SA2/B4 (RC AVERAGE TEMP HIGH/LOW) actuated
* 2SA2/B4 (RC AVERAGE TEMP HIGH/LOW) actuated
* Loop 'A' Controlling Thot fails high (620&deg;F) Based on the above conditions, which ONE of the following describes the initial ICS response AND requirements placed on the operator when stabilizing the plant? ICS will Feedwater flow AND SRO approval required prior to making the initial manual adjustment to Feedwater flow in accordance with OMP 1-18 (Implementation Standard During Abnormal And Emergency Events). A. increase / is B. increase / is NOT C. decrease / is D. decrease / is NOT 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 25 Unit 1 initial conditions:
* Loop 'A' A Controlling Thot fails high (620&deg;F)
* Reactor power = 25% slowly increasing
Based on the above conditions, which ONE of the following describes the initial ICS response AND requirements placed on the operator when stabilizing the plant?
* Turbine trip Current conditions:
ICS will               Feedwater flow AND SRO approval             required prior to making the initial manual adjustment to Feedwater flow in accordance with OMP 1-18 (Implementation Standard During Abnormal And Emergency Events).
* Reactor power = 22% decreasing Based on the above conditions, which ONE of the following describes the procedure(s) that will be utilized to direct plant activities AND the expected Steam Generator pressure (psig)? A. UNPP tab I 885 B. UNPP tab I 1010 C. Plant Operating Procedures I 885 D. Plant Operating Procedures I 1010 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 26 Unit 1 plant conditions:
A. increase / is B. increase / is NOT C. decrease / is D. decrease / is NOT
* Reactor power = 100%
 
2010A 2010A NRC                  OPERATOR EXAM NRC REACTOR OPERATOR           EXAM I1 POINT POINT Question 25 Unit I1 initial initial conditions:
* Reactor power == 25% slowly increasing
* Turbine trip conditions:
Current conditions:
* Reactor power == 22% decreasing decreasing Based on the above conditions, which ONE of the following describes the procedure(s) that will be utilized to direct plant activities AND the expected Steam Generator pressure (psig)?
A. UNPP UNPPtab  tab I 885 B. UNPP tab I 1010 C. Plant Operating Procedures I 885 D. Plant Operating Procedures I 1010
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 26 Unft 1I plant conditions:
Unit
* Reactor power = 100%
* 2SA-18/A11 (TURBINE BSMT WATER EMERGENCY HIGH LEVEL) actuated
* 2SA-18/A11 (TURBINE BSMT WATER EMERGENCY HIGH LEVEL) actuated
* NEO reports water level in Turbine Building basement increasing Based on the above conditions, which ONE of the following describes the required actions directed by AP/1 0 (Turbine Building Flood)? Manually trip the reactor and ... A. align Station ASW pump for use B. secure all LPSW pumps C. secure all operating CCW pumps D. place all HPSW pump switches to "OFF" 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 27 Unit 1 plant conditions:
* NEO reports water level in Turbine Building basement increasing Based on the above conditions, which ONE of the following describes the required AP/lO0 (Turbine Building Flood)?
* Core SCM = OaF
actions directed by AP/1 Manually trip the reactor and...
* LOCA Cooldown tab in progress
and ...
* CETC's = 395&deg;F slowly decreasing
A. align Station ASW pump for use B. secure all LPSW pumps C. secure all operating CCW pumps D. place all HPSW pump switches to "OFF"OFF
* 1 LP-1 03 (POST LOCA BORON DILUTE) will NOT open Based on the above conditions, which ONE of the following valves is required to be opened in accordance with the LOCA CD tab to establish post LOCA boron dilution flow? A. 1LP-3 B. 1LP-19 C. 1LP-104 D. 1LP-105 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 28 Unit 3 initial conditions:
 
2010A NRC REACTOR OPERATOR EXAM 2010A NRC                        EXAM I1 POINT POINT Question 27 Unit I1 plant conditions:
Unit
* Core SCM == 0&deg;F OaF
* LOCA Cooldown tab in progress CETC's == 395&deg;F slowly decreasing
* CETCs
* 1   LP-1 03 (POST LOCA BORON DILUTE) will NOT 1LP-103                                    NOT open Based on the above conditions, which ONE of the following valves is required to be opened in accordance with the LOCA CD tab to establish post LOCA boron dilution dilution flow?
A. 1LP-3 1LP-3 1LP-l9 B. 1LP-19 C. 1LP-104 1LP-I04 D. 1LP-105
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 28 Unit 3 initial conditions:
* Time = 0300
* Time = 0300
* Reactor power = 100%
* Reactor power = 100%
* Reactor trip
* Reactor trip
* CT-3 Lockout occurs Current conditions:
* CT-3 Lockout occurs Current conditions:
* MFB re-energized
* MFB re-energized
* 6900V power still unavailable
* 6900V power still unavailable
* HPI system leak downstream of 3HP-31 occurs
* HPI system leak downstream of 3HP-31 occurs 3A11 RCP SI flow =
* 3A 1 RCP SI flow = 3.9 gpm slowly decreasing
* 3A                   = 3.9 gpm slowly decreasing
* 3A2 RCP SI flow = 3.7 gpm slowly decreasing
* 3A2 RCP SI flow =    = 3.7 gpm slowly decreasing
* 3B1 RCP SI flow = 3.5 gpm slowly decreasing
* 3B1 RCP SI flow =    = 3.5 gpm slowly decreasing
* 3B2 RCP SI flow = 3.4 gpm slowly decreasing
* 3B2 RCP SI flow =    = 3.4 gpm slowly decreasing
* Seal Inlet Header Flow = 40 gpm stable Based on the above conditions, which ONE of the following describes the status of the following RCP support systems valve(s) two minutes later? A. ONLY 3HP-21 has closed B. ONLY 3HP-21 AND 3HP-31 have closed C. ONLY ALL individual seal return valves and 3HP-21 have closed D. ALL individual seal return valves, 3HP-21, and 3HP-31 have closed 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 29 Unit 1 plant conditions:
* Seal Inlet Header Flow = 40 gpm stable Based on the above conditions, which ONE of the following describes the status of the following RCP support systems valve(s) two minutes later?
* Reactor power = 100%
A. ONLY 3HP-21 has closed B. ONLY 3HP-21 AND 3HP-31 have closed C. ONLY ALL individual seal return valves and 3HP-21 have closed D. ALL individual seal return valves, 3HP-21, and 3HP-31 have closed
* 1CC-8 (CC RETURN PENT (54) OUTSIDE BLOCK) fails closed
 
* 1 LPSW-6 (UNIT 1 RCP COOLERS SUPPLY) fails closed Based on the above conditions, which ONE of the failed valves will require ALL RCPs to be secured in accordance with AP/16 (Abnormal Reactor Coolant Pump Operation) and why? A. 1 CC-8 / due to high RCP motor stator temperatures B. 1 CC-8 / due to high RCP radial bearing temperatures C. 1 LPSW-6 / due to high RCP motor stator temperatures D. 1 LPSW-6 / due to high RCP radial bearing temperatures 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 30 Unit 1 initial conditions:
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* Reactor power = 100%
Question 29 1 plant conditions:
* 1 A CC pump operating Current conditions:
Unit 1
* 1 CC-7 fails closed Based on the above conditions, which ONE of the following describes the expected plant response?
* Reactor power = 100%
A. Letdown must be manually isolated and NEITHER CC Pump will be operating B. Letdown must be manually isolated and BOTH CC Pumps will be operating C. Letdown will be automatically isolated and NEITHER CC Pump will be operating D. Letdown will be automatically isolated and BOTH CC Pumps will be operating 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 31 Unit 3 initial conditions:
1 CC-8 (CC RETURN PENT (54) OUTSIDE BLOCK) fails closed
* Reactor in MODE 4
* 1CC-8
* LPI DHR alignment for cooldown in progress Current conditions:
* 1 1 LPSW-6 (UNIT 1I RCP COOLERS SUPPLY) fails closed Based on the above conditions, which ONE of the failed valves will require ALL RCPs to be secured in accordance with AP/16 (Abnormal Reactor Coolant Pump Operation) and why?
* 3LP-3 (LPI HOT LEG SUCTION) will not open
1 CC-8 /I due to high RCP motor stator temperatures A. 1 CC-8 /I due to high RCP radial bearing temperatures 1CC-8 B. 1 1 LPSW-6 /I due to high RCP motor stator temperatures C. 1 I LPSW-6 /I due to high RCP radial bearing temperatures D. 1
* 3LP-12 (3A LPI COOLER OUTLET) failed closed Based on the above conditions, which ONE of the following describes the effect of the failures on ECCS-LPI train availability?
 
The 3LP-3 failure impact ECCS-LPI train availability and the failure of 3LP-12 __ impact ECCS-LPI train availability.
2010A NRC REACTOR OPERATOR EXAM I POINT 1
A. Does / Does B. Does / Does NOT C. Does NOT / Does D. Does NOT / Does NOT 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 32 Unit 1 plant conditions:
Question 30 Unit 1 I initial conditions:
* RCS pressure = 365 psig
* Reactor power =    = 100%
* An attempt is made to open 1 LP-1 (LPI RETURN BLOCK FROM RCS) Based on the above conditions, which ONE of the following describes if 1 LP-1 will open AND the reason 1 LP-1 has an interlock?
* 1 1A A CC pump operating Current conditions:
A. yes / prevent overpressurizing LPI suction piping B. yes / ensure delta p across 1 LP-1 will allow it to open C. No / prevent overpressurizing LPI suction piping D. No / ensure delta p across 1 LP-1 will allow it to open 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 33 Unit 1 initial conditions:
* 1 ICC-7 CC-7 fails closed Based on the above conditions, which ONE of the following describes the expected plant response?
* Reactor power = 100% Current conditions:
A. Letdown must be manually isolated and NEITHER CC Pump will be operating B. Letdown must be manually isolated and BOTH CC Pumps will be operating C. Letdown will be automatically isolated and NEITHER CC Pump will be operating D. Letdown will be automatically isolated and BOTH CC Pumps will be operating
* RCS pressure = 1350 psig decreasing
 
* Reactor Building pressure = 4.8 psig increasing
2010A NRC 2010A   NRC REACTOR      OPERATOR EXAM REACTOR OPERATOR           EXAM I1 POINT POINT Question 31 Question      31 Unit 33 initial Unit    initial conditions:
* ES Channel 2 did NOT actuate Based on the above conditions, which ONE of the following describes ALL safety injection pumps that have AUTOMATICALLY started? A. 1A HPI, 1B HPI, 1A LPI, 1B LPI B. 1A HPI, 1C HPI, 1A LPI, 1B LPI C. 1A HPI, 1B HPI, 1A LPI ONLY D. 1A HPI, 1A LPI ONLY 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 34 Unit 1 plant conditions:
conditions:
* OP/1/A/1103/002, (Filling and Venting RCS) Enclosure 4.14 (Establishing Pzr Steam Bubble And RCS Final Vent) in progress
Reactor in
* Quench Tank level = 82 inches
* Reactor       in MODE MODE 44
* Quench Tank pressure = 0.5 psig
* LPI LPI DHR DHR alignment    for cooldown alignment for           in progress cooldown in progress Current conditions:
* The Pressurizer is vented to the Quench Tank for 30 minutes Based on the above conditions, which ONE of the following describes QT parameters that would indicate that Pzr Steam Bubble Formation is complete?
Current (LPI HOT 3LP-3 (LPI
QT level (inches) QT pressure (psig) A. 82.1 0.6 B. 84.1 0.6 C. 82.1 2.5 D. 84.1 2.5 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 35 Which ONE of the following describes the normal power supply to the 1A CC pump AND the emergency backup source of power that will be supplying the Main Feeder Buses following a Loss of Offsite Power due to a Switchyard Isolation?
* 3LP-3                  LEG SUCTION)
A. 1XL / KHU via overhead path B. 1XL / KHU via underground path C. 1XS1 / KHU via overhead path D. 1XS1 / KHU via underground path 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 36 Unit 3 plant conditions:
HOT LEG                    not open SUCTION) will not    open 3LP-12 (3A
* Reactor power = 100%
* 3LP-12       (3A LPI COOLER OUTLET) failed closed LPI COOLER                      closed Based on Based    on the above                      ONE of above conditions, which ONE       the following describes the of the                        the effect of of the ECCS-LPI train availability?
* Channel A AND Channel E narrow range RCS pressure fails HIGH Based on the above conditions, which ONE of the following describes the RPS trip that will trip the reactor AND the RCS pressure that will result in an ES digital channels 1 & 2 actuation?
failures on ECCS-LPI 3LP-3 failure The 3LP-3                       impact                   availability and the failure of 3LP-12 impact ECCS-LPI train availability                       3LP-12
ASSUME NO OPERATOR ACTIONS A. Variable Low Pressure / 1600 B. Variable Low Pressure / 1810 C. High Pressure / 1600 D. High Pressure / 1810 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 37 Unit 2 plant conditions:
_ _ impact ECCS-LPI train availability.
* Reactor power = 100%
A. Does I/ Does B. Does I/ Does NOT    NOT C. Does NOT I/ Does D. Does NOT I/ Does NOT
* 2B RPS Channel Low RCS Pressure Bistable failed in "tripped" state
 
* 2B RPS Channel in "Manual Bypass" Current conditions:
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* 2C RPS Channel inadvertently placed in "Shutdown Bypass" Based on the above conditions, which ONE of the following describes the impact (if any) on reactor power and control room alarms? With NO additional operator actions, reactor power will be and the associated RPS Channel C statalarm for bistable trip will be actuated.
Question 32 Unit 11 plant conditions:
A. 0% I Low pressure B. 0% I High pressure C. 100% I Low pressure D. 100% I High pressure 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 38 Which ONE of the following would result in a trip of the 1 D RPS Channel AND the 1 D CRD Breaker? A. Reactor Building pressure bistables in the 1A and 1 B RPS channels fail in the "tripped" state B. Reactor Building pressure bistable in the 1 D RPS channel fails in the "tripped" state C. RC pressure test module for 1 D RPS channel placed in "Test Operate" D. Loss of the 1 KVID panelboard 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 39 Unit 2 initial conditions:
* RCS pressure =    = 365 psig
* Reactor power = 100% Current conditions:
* An attempt is made to open 1      ILP-1 LP-1 (LPI RETURN BLOCK FROM RCS) 1 LP-1 will open Based on the above conditions, which ONE of the following describes if 1 AND the reason 1 I LP-1 LP-l has an interlock?
* MSLB occurs
A. yes /I prevent overpressurizing LPI suction piping B. yes I/ ensure delta p across 1 I LP-1 LP-I will allow it to open C. No /I prevent overpressurizing LPI suction piping D. No /I ensure delta p across 1 LP-1 will allow it to open
* RCS pressure = 1580 psig slowly increasing
 
* RB peak pressure = 2.8 psig Based on the above conditions, which ONE of the following describes valves that have received a signal to CLOSE? A. 2CC-7 B. 2LWD-1 c. 2LPSW-6 D. 2LPSW-1062 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 40 Unit 3 plant conditions:
2010A NRC REACTOR OPERATOR EXAM 2010A NRC                      EXAM I1 POINT Question 33 Unit 11 initial initial conditions:
* Reactor power = 100%
* Reactor power == 100% 100%
* 3KVIA AC Vital Power Panelboard supply breaker trips OPEN
Current conditions:
* ES Analog Channel "C" WR RCS pressure signal fails LOW Based on the above conditions, which ONE of the following describes which (if any) ES digital channels have actuated?
* RCS pressure =       1350 psig decreasing
have actuated.
                          = 1350
----A. NO channels B. Channels 1 thru 4 C. ONLY channels 2 AND 4 D. ONLY channels 1 AND 3 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 41 Unit 1 plant conditions:
* Reactor Building pressure == 4.8 psig increasing
* ES Channel 22 did NOT actuate Based on the above conditions, which ONE of the following describes ALL safety injection pumps that have AUTOMATICALLY started?
A. 1A 1A HPI,     1B HPI, 1A LPI, 1B LPI HPI,IBHPI,1ALPI,IBLPI B. 1A IA HPI, 1C  1C HPI, 1A IA LPI, 1B lB LPI C. 1A HPI, 1B   lB HPI, 1A LPI ONLY D. 1A HPI, 1A       LPI ONLY 1ALPI
 
NRC REACTOR OPERATOR 2010A NRC 2010A                        OPERATOR EXAM EXAM I1 POINT POINT Question 34 Unit I1 plant conditions:
* OP/i/All    103/002, (Filling and Venting RCS) Enclosure 4.14 (Establishing Pzr OP/1/A/1103/002, Steam Bubble And RCS Final Vent) in progress
* Quench Tank level level == 82 82 inches
* Quench Tank       pressure   =  0.5 psig
                                    = 0.5 psig
* The Pressurizer is  is vented toto the Quench Tank for 30 30 minutes minutes Based on the above conditions, which ONE of the following describes describes QT parameters that would indicate that Pzr Steam   Bubble   Formation is complete?
QT level (inches)               QT pressure (psig)
A.             82.1                             0.6 B.             84.1                             0.6 C.             82.1                             2.5 D.             84.1                             2.5
 
NRC REACTOR 2010A NRC 2010A        REACTOR OPERATOR EXAM     EXAM I1 POINT POINT Question 35 normal power supply to the 1A describes the normal Which ONE of the following describes                                     1ACC CC pump pump AND the emergency backup source of power that will be supplying the Main  Main Feeder Offsite Power due Buses following aa Loss of Offsite             to aa Switchyard Isolation?
due to 1XL I/ KHU via A. 1XL         via overhead path path B. 1XL I/ KHU via underground path B. 1XL 1XS1 I/ KHU via overhead path C. IXS1 1XS1 I/ KHU via underground path D. 1XS1 D.
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 36 Unit 3 plant conditions:
* Reactor power = 100%
* Channel A AND Channel E narrow range RCS pressure fails HIGH Based on the above conditions, which ONE of the following describes the RPS trip that will trip the reactor AND the RCS pressure that will result in an ES digital channels 1I & 2 actuation?
ASSUME NO OPERATOR ACTIONS A. Variable Low Pressure I/ 1600 1810 B. Variable Low Pressure /I 1810 C. High Pressure I/ 1600 D. High Pressure /I 1810
 
2010A NRC 2010A        REACTOR OPERATOR EXAM NRC REACTOR                      EXAM I1 POINT POINT Question 37 Unit 22 Unit    plant conditions:
* Reactor power == 100%
100%
* Pressure Bistable 2B RPS Channel Low RCS Pressure                           "tripped" state Bistable failed in tripped
* 2B RPS Channel Channel in   "Manual Bypass in Manual  Bypass" Current conditions:
Current "Shutdown Bypass
* 2C RPS Channel inadvertently placed in Shutdown           Bypass" Based on the above conditions, which ONE of the following describes the impact (if any) on reactor power and control room alarms?
on With NO additional operator actions, reactor power will be               and the associated RPS Channel C statalarm for           bistable trip will be actuated.
A. 0% /I Low pressure B. 0% I High pressure 100% I Low pressure C. 100%
D. 100% I/ High pressure
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 38 Which ONE of the following would result in a trip of the 11 D RPS Channel AND the 11 D CRD Breaker?
A. Reactor Building pressure bistables in the 1AIA and 1I B RPS channels fail in the "tripped" tripped state tripped state B. Reactor Building pressure bistable in the 11 D RPS channel fails in the "tripped" C. RC pressure test module for 1I D RPS channel placed in "Test    Operate Test Operate" D. Loss of the 11KVID KVID panelboard
 
NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I1 POINT Question 39 Unit 22 initial initial conditions:
* Reactor power == 100%  100%
Current conditions:
Current
* MSLBMSLB occurs occurs pressure == 1580
* RCS pressure                     slowly increasing 1580 psig slowly
* RB peak pressure pressure == 2.8 psig Based on the above conditions, which ONE of the following describes valves that have received aa signal to CLOSE?
A. 2CC-7 B. 2LWD-1 c.
C. 2LPSW-6 D. 2LPSW-1062
 
2010A NRC 2010A NRC REACTOR     OPERATOR EXAM REACTOR OPERATOR          EXAM I1 POINT Question 40 Unit 33  plant conditions:
* Reactor power=
power = 100%
100%
* breaker trips OPEN 3KVIA AC Vital Power Panelboard supply breaker
    *                       "C" WR ES Analog Channel C     RCS pressure signal fails LOW pressure signal Based on the above conditions, which ONE of Based                                      of the following describes which (if any) ES ES digital channels have actuated?
digital
- - - - have actuated.
A.     NO channels B.     Channels 11 thru 4 C.     ONLY channels 2 AND 4 D.     ONLY channels 1 AND 3
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 41 iplant Unit 1 plant conditions:
* Time = 03:00
* Time = 03:00
* Reactor power = 100%
* Reactor power =    = 100%
* 1 Band 1 C RBCUs operating in HIGH speed
* 1 lB and 1IC Band   C RBCUs operating in HIGH speed
* 1 A RBCU is operable and OFF
* 1 1A A RBCU is operable and OFF
* ES channels 1-6 actuate Based on the above conditions, which ONE of the following describes RBCU status at 03:02? A. 1B and 1C RBCUs operating in HIGH speed and 1A RBCU OFF 8. 1 Band C RBCUs operating in LOW speed and 1 A RBCU OFF C. ALL RBCUs operating in LOW speed D. ALL RBCUs will be OFF 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 42 Which ONE of the following describes the range of BWST levels where RBS pump suction would be aligned to both the RBES and the BWST simultaneously AND what action(s) would be required if 1 LP-22 failed to close when isolating the BWST? When performing Enclosure
* ES channels 1-6 actuate Based on the above conditions, which ONE of the following describes RBCU status at 03:02?
: 5. 12 (ECCS Suction Swap to RBES) both suction sources are aligned when BWST level is between (feet) AND ____ _ A. 15 -9 / stop the 1 B LPI pump AND 1 B RBS pump B. 15 -9 / Maximize total LPI flow < 3100 gpm C. 9 -6 / stop the 1 B LPI pump AND 1 B RBS pump D. 9 -6 / Maximize total LPI flow < 3100 gpm 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 43 Unit 3 initial conditions:
A. 1B lB and 1C RBCUs operating in HIGH speed and 1A RBCU OFF B. 1lB
* Reactor power = 35% slowly increasing Current conditions:
: 8.     and C RBCUs Band      RBCU5 operating in LOW speed and 11A A RBCU OFF C. ALL RBCUs RBCU5 operating in LOW speed D. ALL RBCUs will be OFF
* Reactor power = 30% decreasing
 
2010A   NRC REACTOR OPERATOR EXAM 2010A NRC                              EXAM I1 POINT POINT Question 42 Question Which ONE of the following describes the range of BWST  BWST levels where RBS pump pump suction would be aligned to both the RBES       and the BWST simultaneously AND what action(s) would be required if 11 LP-22 failed to close when isolating the BWST?
BWST?
When performing Enclosure 5. 12    12 (ECCS Suction                        suction sources Suction Swap to RBES) both suction are aligned when BWST level are                        level is between               (feet) AND _ _ _ __
15 - 9 I/ stop the lB A. 159                  1B LPI pump AND 1   lBB RBS pump B. 15 159- 9 I/ Maximize total LPI flow << 3100 gpm 9 - 6 I/ stop the 1 C. 9-6                B LPI pump AND lB lB                  1B RBS pump D. 99 - 6 I/ Maximize total LPI flow <
      -                                < 3100 gpm
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 43 Unit 3 initial conditions:
* Reactor power =    = 35% slowly increasing Current conditions:
* Reactor power =    = 30% decreasing
* PCB 58 and PCB-59 (Unit 3 Generator Output Bkrs) OPEN
* PCB 58 and PCB-59 (Unit 3 Generator Output Bkrs) OPEN
* Turbine master in HAND
* Turbine master in HAND O3X2060 (ICS TURBINE LOADING STATUS) = FALSE
* OAC point 03X2060 (ICS TURBINE LOADING STATUS) = FALSE Based on the above conditions, which ONE of the following describes the operation of the Turbine Bypass Valves (TBV's)? ____ is being compared to Turbine Header Pressure setpoint to develop the controlling error signal AND TBV's are controlling at psig? A. Turbine Header Pressure / 885 B. Turbine Header Pressure / 935 C. Steam Generator Outlet Pressure / 885 D. Steam Generator Outlet Pressure / 935 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 44 Unit 1 initial conditions:
* OAC point 03X2060 Based on the above conditions, which ONE of the following describes the operation of the Turbine Bypass Valves (TBV's)?
* Reactor power = 70% stable Current conditions:
(TBVs)?
* 1 HPE-6 (Heater 1A1 Bleed Inlet) closed Based on the above conditions, which ONE of the following predicts the impact of the malfunction on Feedwater flow assuming no operator action AND the procedure which will be used to reopen 1 HPE-6? Feedwater flow will stabilize at a _ ____:_---value than the pre-transient level AND ____ will be used to reopen 1 HPE-6. A. higher / OP/1/A/1106/23 (High and Low Pressure Extraction)
____ is being compared to Turbine Header Pressure setpoint to develop the TBVs are controlling at controlling error signal AND TBV's                         psig?
B. higher / OP/1/A/1106/002 (Condensate and FDW system) C. lower / OP/1/A/1106/23 (High and Low Pressure Extraction)
A. Turbine Header Pressure /I 885 B. Turbine Header Pressure /I 935 C. Steam Generator Outlet Pressure /I 885 D. Steam Generator Outlet Pressure /I 935
D. lower / OP/1/A/1106/002 (Condensate and FDW system) 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 45 Unit 1 initial conditions:
 
* Reactor power = 100% Current conditions:
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 44 Unit 11 initial conditions:
* Reactor power =    = 70% stable Current conditions:
* 1 1HPE-6 HPE-6 (Heater 1A1 IA1 Bleed Inlet) closed Based on the above conditions, which ONE of the following predicts the impact of the malfunction on Feedwater flow assuming no operator action AND the procedure which will be used to reopen 1IHPE-6?
HPE-6?
Feedwater flow will stabilize at a _ ____:_--- value than the pre-transient level AND
____ will be used to reopen 1       I HPE-6.
0P111A11106123 (High and Low Pressure Extraction)
A. higher /I OP/1/A/1106/23 B. higher I/ OP/1/A/1106/002 OPI1/A111061002 (Condensate and FDW system)
C. lower I/ OP/1/A/1106/23 (High and Low Pressure Extraction)
D. lower /I OP/1/A/1106/002 (Condensate and FDW system)
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 45 Unit 11 initial conditions:
* Reactor power =      = 100%
Current conditions:
* Reactor trip
* Reactor trip
* 1 FDW-33 (1A SU FDW Block) FAILS closed Based on the above conditions, which ONE of the following describes the expected Steam Generator levels 20 minutes after the trip? ASSUME NO OPERATOR ACTIONS 1A SG level = ___ AND 1B SG level = __ _ A. 25" Stu t 25" StU 8. 12" StU t 25" StU C. 30" XSUR t 25" StU D. 30" XSUR t 30" XSUR 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 46 Unit 1 initial conditions:
* 1 FDW-33 (1A(IA SU FDW Block) FAILS closed Based on the above conditions, which ONE of the following describes the expected Steam Generator levels 20 minutes after the trip?
* Reactor power = 100%
ASSUME NO OPERATOR ACTIONS 1A SG level     =
* Unit 1 TDEFWP unavailable Current conditions:
                = ___ AND 1B   lB SG level =
                                            = ___
A 25" A. 25 StuS/U t/ 25" 25 StU S/U 8.
B 12" 12 StUS/U t/ 25" 25 StU S/U C. 30 XSUR t/ 25" C 30"                  S/U 25 StU D. 30"   XSUR t/ 30" 30XSUR              XSUR 30XSUR
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 46 Unit 11 initial conditions:
* Reactor power =    = 100%
* Unit 1 I TDEFWP unavailable Current conditions:
* Both Main FDW pumps trip
* Both Main FDW pumps trip
* 1B MDEFWP fails to start Based on the above conditions, which ONE of the following describes actions directed by the EOP to remove core decay heat? Initiate ... A. Rule 3 (Loss of Main or Emergency Feedwater) and cross connect with an alternate unit to supply the 1B Steam Generator B. Rule 3 (Loss of Main or Emergency Feedwater) to decrease SG pressure and feed with Condensate Booster pumps C. Rule 4 (Initiation of HPI Forced Cooling) if RCS pressure reaches 2300 psig D. EOP Encl. 5.9 (Extended EFDW Operation) and feed both SG's with 1A MDEFWP 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 47 Which ONE of the following describes actions required that will extend the life of the Control Batteries following a loss of all AC power in accordance with EOP Enclosure 5.38 (Restoration of Power)? Load Shed the inverter.
* 1BI B MDEFWP fails to start Based on the above conditions, which ONE of the following describes actions directed by the EOP to remove core decay heat?
A. KI B.DIA C. KSF-1 D. KOAC 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 48 Which ONE of the following describes the normal alignment of the Power Battery busses AND a condition in which SLC 16.8.3 (Power Battery Parameters) would require changing that alignment?
Initiate...
The Oconee units are normally ____ and this would be changed if ___ _ A. cross-tied / a single power battery becomes inoperable B. cross-tied  
Initiate ...
/ two or more power batteries simultaneously become inoperable C. separated / a single power battery becomes inoperable D. separated  
A. Rule 3 (Loss of Main or Emergency Feedwater) and cross connect with an alternate unit to supply the 1B 1 B Steam Generator B. Rule 3 (Loss of Main or Emergency Feedwater) to decrease SG pressure and feed with Condensate Booster pumps C. Rule 4 (Initiation of HPI Forced Cooling) if RCS pressure reaches 2300 psig D. EOP Encl. End. 5.9 (Extended EFDW Operation) and feed both SG's SGs with 1A MDEFWP
/ two or more power batteries simultaneously become inoperable 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 49 Operators are preparing to synchronize KHU-2 to the grid in accordance with OP/O/A/1106/019, (Keowee Hydro At Oconee) The operator notes the following indications:
 
* Grid Frequency  
2010A NRC 2010A          REACTOR OPERATOR EXAM NRC REACTOR I1 POINT Question 47 Which ONE of the following describes actions required that will extend the life of the Control Batteries following aa loss of all AC power in accordance with FOP EOP Enclosure 5.38 (Restoration of Power)?
= 59.9 cycles
Load Shed Shed the       inverter.
* Keowee Frequency  
A.Kl A. KI B.DIA B. DIA C. KSF-1 D. KOAC
= 60.3 cycles
 
* Keowee 2 Line Volts = 13.7 kV
2010A NRC 2010A  NRC REACTOR       OPERATOR EXAM REACTOR OPERATOR            EXAM I1 POINT POINT Question 48 Question  48 Which ONE Which ONE ofof the            describes the the following describes the normal    alignment of normal alignment       the Power of the Power Battery Battery busses  AND  a condition  in which SLC busses AND a condition in which SLC 16.8.316.8.3 (Power (Power   Battery Battery  Parameters)
* Keowee 2 Output Volts = 15.2 kV Based on the above conditions, which ONE of the following describes the control that will be used to adjust the synchroscope indication and after ACB-2 is closed, generator output should be adjusted to ? The will be used to adjust the synchroscope indication AND generator output should be adjusted to MWs. A. UNIT 2 AUTO VOLTAGE ADJUSTER I 0 B. UNIT 2 SPEED CHANGER MOTOR I 0 C. UNIT 2 AUTO VOLTAGE ADJUSTER I 10 D. UNIT 2 SPEED CHANGER MOTOR I 10 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 50 Unit 1 conditions:
Parameters)  would require would  require changing that changing  that alignment?
Time = 1159:40
alignment?
* Reactor power = 100% stable
Oconee units are normally The Oconee              normally ____ and    and this would be   changed ifif _ _ __
* KHU-100S
be changed cross-tied I/ aa single power battery A. cross-tied                            becomes inoperable battery becomes B. cross-tied I/ two or more         batteries simultaneously become inoperable more power batteries                              inoperable C. separated I/ aa single power battery becomes inoperable separated I/ two or more power batteries simultaneously become inoperable D. separated
 
NRC REACTOR OPERATOR 2010A NRC 2010A                      OPERATOR EXAM EXAM I1 POINT POINT Question 49 Question Operators are preparing to synchronize KHU-2 to the grid in accordance with OP/O/A/1106/019, OP/OIAI1                      Hydro At Oconee) 106/019, (Keowee Hydro The           notes the following indications:
The operator notes                indications:
* Grid Frequency == 59.9 59.9 cycles
* Keowee Keowee  Frequency   = 60.3 cycles
                            =
* Keowee 2 Line          =
Line Volts = 13.7 13.7 kV
* Keowee 22 Output Volts == 15.2 15.2 kV Based onon the above conditions, which ONE of    of the following describes the control that will be used to adjust the synchroscope indication and after ACB-2 is closed, generator output should be adjusted to           ?
The                     used to adjust the synchroscope indication AND generator output will be used should be adjusted to           MWs.
A. UNIT   2 AUTO VOLTAGE ADJUSTER I 0 UNIT2AUTOVOLTAGEADJUSTER B. UNIT 2 SPEED CHANGER MOTOR I 0 C. UNIT   2 AUTO VOLTAGE ADJUSTER /10 UNIT2AUTO                                I 10 D. UNIT 2 SPEED CHANGER MOTOR I 10
 
2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 50 Unit 1 1 conditions:
Time = 1159:40 1159:40
* Reactor power == 100% stable
* KHU-1 OOS KHU-100S
* ACB-4 closed
* ACB-4 closed
* KHU-2 gets Emergency Start signal from another unit Time = 1200:00
* KHU-2 gets Emergency Start signal from another unit Time == 1200:00
* KHU-2 speed reaches 190 RPM Time = 1200:30
* KHU-2 speed reaches 190 RPM Time =  1200:30
* KH U-2 speed = 190 RPM Based on the above conditions, which ONE of the following describes the status of KHU-2 and the procedural actions required by Unit 1 (if any) as a result of that status? A. Emergency locked out / Enter LCO 3.0.3 immediately B. Emergency locked out / Energize BOTH Standby Buses within 1 hour C. Energizing CT-4 / No additional actions required D. Energizing CT-4 / Energize EITHER Standby Bus within 1 hour 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 51 Unit 1 initial conditions:
      = 1200:30
* Time = 1200
* KHKHU-2 U-2 speed = 190 RPM Based on the above conditions, which ONE of the following describes the status of reciuired by Unit 11 (if any) as a result of that status?
* Reactor power = 35%
KHU-2 and the procedural actions required A. Emergency locked out / Enter LCO 3.0.3 immediately B. Emergency locked out /I Energize BOTH Standby Buses within 1        1 hour C. Energizing CT-4 I/ No additional actions required D. Energizing CT-4 / Energize EITHER Standby Bus within 1      1 hour
* 1 A steam generator tube leak = 2.1 gpd stable
 
* RCS activity = 0.25 IJCi/ml DEI increasing Current conditions:
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* Time = 1400
Question 51 Unit 1 1 initial conditions:
Time=1200
* Time     = 1200
* Reactor power =    = 35%
* 1 A steam generator tube leak =
IA                                = 2.1 gpd stable
* RCS activity =          pCi/mi DEI
                      = 0.25 IJCi/ml DEl increasing Current conditions:
* Time Time=1400
              = 1400
* NO change in 1A SG tube leak rate
* NO change in 1A SG tube leak rate
* RCS activity = 0.65 IJCi/ml DEI and increasing Based on the above conditions, which ONE of the following describes the response of the radiation monitors between 1200 and 1400? A. 1 RIA-16 (Main Steam Line Monitor) and 1 RIA-40 (CSAE Off-gas) increased.
* RCS activity =    = 0.65 IJCi/ml DEl and increasing pCi/mI DEI Based on the above conditions, which ONE of the following describes the response of the radiation monitors between 1200 and 1400?
B. 1RIA-16 (Main Steam Line Monitor) increased while 1RIA-40 (CSAE Off-gas) remained constant.
A. 1IRIA-16 RIA-16 (Main Steam Line Monitor) and 1     1R1A-40 RIA-40 (CSAE Off-gas) increased.
C. 1 RIA-59 (N-16 monitor) and 1 RIA-40 (CSAE Off-gas) increased.
B. 1RIA-16                                                IRIA-40 (CSAE Off-gas)
D. 1 RIA-59 (N-16 monitor) increased while1 RIA-40 (CSAE Off-gas) remained constant.
IRIA-16 (Main Steam Line Monitor) increased while 1RIA-40 remained constant.
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 52 Unit 1 initial conditions:
C. 1 RIA-59 (N-16 monitor) and 1 IRIA-59                        IRIA-40 RIA-40 (CSAE Off-gas) increased.
* Time = 1200
D. 11RIA-59 RIA-59 (N-16 monitor) increased while1whilelRlA-40 RIA-40 (CSAE Off-gas) remained constant.
* Reactor power = 100%
 
* A and B LPSW Pumps operating
2010A 2010A NRCNRC REACTOR OPERATOR EXAM   EXAM I1 POINT POINT Question 52 Unit 1 initial conditions:
* C LPSW pump in AUTO
I initial
* Blackout Occurs Current conditions:
* Time=1200 Time = 1200 power = 100%
* Time = 1230
* Reactor power=         100%
* Both MFB's re-energized Based on the above conditions, which ONE of the following describes the status of the C LPSW pump 5 seconds after the MFB's have re-energized AND the system that will require the use of OP/1 IA/11 04/01 0 (Low Pressure Service Water) to return it to service once LPSW pressure has been restored?
* A andand B B LPSW Pumps operating operating
A. operating 1 Reactor Building Aux Coolers B. operating 1 RBCU's C. NOT operating 1 Reactor Building Aux Coolers D. NOT operating 1 RBCU's 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 53 Initial plant conditions:
* C C LPSW pump in    in AUTO Blackout Occurs
* Large IA leak occurs
* Blackout Current conditions:
* Service air header pressure = 87 psig decreasing
* Time=1230 Time = 1230
* Turbine Building air header pressure per gage below TlJRS BLDG 160 == 140 == 120 == 100 --80 40 20 PSI o Based on the above conditions, which ONE of the following describes the air compressors that will be operating?
* Both MFBsMFB's re-energized Based on the above conditions, which ONE of the following describes the status of the C LPSW pump 5 seconds after the MFBs  MFB's have re-energized AND the system that will require the use of OP/1   IA/11 04/01 0 (Low Pressure Service Water) to return it to service OP/i /A/1104/0i0 once LPSW pressure has been restored?
The Primary IA Compressor AND ... A. Diesel Air Compressors ONLY B. Diesel Air Compressors AND AlA Compressors ONLY C. AlA Compressors AND Backup IA Compressors ONLY D. Backup IA Compressors ONLY 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 54 Unit 2 initial conditions:
A. operating 1 I Reactor Building Aux Coolers B. operating 1 I RBCU's RBCUs C. NOT operating 1 C.                    / Reactor Building Aux Coolers D. NOT operating 1     RBCUs I RBCU's
* Reactor power = 100%
 
NRC REACTOR OPERATOR 2010A NRC 2010A                    OPERATOR EXAM I1 POINT Question 53 Initial plant conditions:
* Large IA IA leak occurs
* pressure == 87 psig decreasing Service air header pressure
* Building air header pressure per gage below Turbine Building TlJRS TURB BLDG 160 160  ==
 
140 140  ==
 
120 120   ==
 
100 100     -
                - ~==
 
80 80   -
 
60 60    -
 
40 40 20 20 PSI PSI o0 Based on the above conditions, which ONE of the following describes the air compressors that will be operating?
The Primary IA Compressor AND           ...
AND...
A. Diesel Air Compressors ONLY B. Diesel Air Compressors AND AlA Compressors ONLY C. AlA Compressors AND Backup IA Compressors ONLY D. Backup IA Compressors ONLY
 
2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 54 Unit 2 initial conditions:
* Reactor power = 100%
* 2HP-5 failed closed Current conditions:
* 2HP-5 failed closed Current conditions:
* Operator dispatched to manually open 2HP-5
* Operator dispatched to manually open 2HP-5
* Pressurizer level 245 inches slowly increasing Based on the above conditions, which ONE of the following describes actions required in accordance with AP/32 (Loss of Letdown) AND the MINIMUM Pressurizer level (inches) at which a manual reactor trip would be required?
* Pressurizer level 245 inches slowly increasing Based on the above conditions, which ONE of the following describes actions required in accordance with AP/32 (Loss of Letdown) AND the MINIMUM Pressurizer level (inches) at which a manual reactor trip would be required?
A. Maintain constant communication with operator dispatched to open 2HP-5 400 B. Maintain constant communication with operator dispatched to open 2HP-5 380 C. Initiate unit shutdown at =20%/min per AP/29 (Rapid Unit Shutdown) 400 D. Initiate unit shutdown at =20%/min per AP/29 (Rapid Unit Shutdown) 380 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 55 Unit 3 initial conditions:
A. Maintain constant communication with operator dispatched to open 2HP-5 400 B. Maintain constant communication with operator dispatched to open 2HP-5 380 C. Initiate unit shutdown at =20%/min 20%/min per AP/29 (Rapid Unit Shutdown) 400 20%/min per AP/29 (Rapid Unit Shutdown)
* 3CC-8 has been manually opened due to loss of air to the valve Current conditions:
D. Initiate unit shutdown at =20%/min 380
* Instrument air has been restored to 3CC-8
 
* 3CC-8 remains manually open Based on the above conditions, which ONE of the following describes whether 3CC-8 can be operated from the control room and 3CC-8's response to an ES 1-6 actuation?
NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I1 POINT POINT Question 55 Unit 33 initial Unit    initial conditions:
3CC-8 __ be operated from the control room and 3CC-8 ___ automatically close. A. can / will B. can / will NOT C. can NOT / will D. can NOT / will NOT 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 56 Unit 1 initial conditions:
* 3CC-8 has    has been manually opened due     loss of air to the valve due to loss Current conditions:
* 100% power
* Instrument air has been restored to 3CC-8 3CC-8 remains manually open
* 450 EFPD Based on the above conditions, which ONE of the following events is the cause of the indications on the attached PIT display? ASSUME NO OPERATOR ACTIONS A. SBLOCA B. LBLOCA C. MSLB D. Loss of MFDW 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 57 Which ONE of the following is the power supply for the Unit 1 Group B Pressurizer heaters? A. 1XH B. 1XI C. 1XS1 D. 1XSF 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 58 Which ONE of the following describes who determines that a RB Continuous Release is allowed and after it is started what are the requirements for sampling the RB atmosphere in accordance with OP/1102/014 (RB Purge System)? A. CRSRO / Release may continue indefinitely after initial 24 hours without submitting daily sample requests.
* 3CC-8 Based on the above conditions, which ONE of the following describes whether 3CC-8 3CC-8's response to an ES 1-6 can be operated from the control room and 3CC-8s                          1-6 actuation?
B. CRSRO / Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours. C. Shift RP / Release may continue indefinitely after initial 24 hours without submitting daily sample requests.
3CC-8 _ _be operated from the control room and 3CC-8 ___ automatically close.
D. Shift RP / Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours.
A. can I/ will B. can I/ will NOT C. can NOT I/ will D. can NOT I/ will NOT
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 59 Plant conditions:
 
* Spent Fuel Storage Cask has been dropped in Unit 1 &2 SFP
2010A NRC 2010A                 OPERATOR EXAM NRC REACTOR OPERATOR       EXAM I1 POINT Question 56 Unit 1 Unit I initial conditions:
* 100%
100% power
* 450 EFPD Based on the above conditions, which ONE of the following events is the cause of the indications on the attached PIT display?
ASSUME NO OPERATOR ACTIONS A. SBLOCA B. LBLOCA C. MSLB D. Loss   of MFDW LossofMFDW
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 57 Which ONE of the following is the power supply for the Unit 11 Group B Pressurizer heaters?
IXH A. 1XH B. 1XI C. 1XS1 1XSI D. 1XSF
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 58 Which ONE of the following describes who determines that a RB Continuous Release is allowed and after it is started what are the requirements for sampling the RB 0P111021014 (RB Purge System)?
atmosphere in accordance with OP/1102/014 A. CRSRO I/ Release may continue indefinitely after initial 24 hours without submitting daily sample requests.
B. CRSRO /I Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours.
C. Shift RP I/ Release may continue indefinitely after initial 24 hours without submitting daily sample requests.
D. Shift RP /I Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours.
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 59 Plant conditions:
* Spent Fuel Storage Cask has been dropped in Unit 1     1&2
                                                            &2 SFP
* Spent Fuel damage is visible
* Spent Fuel damage is visible
* RIA-6 and RIA-41 HIGH alarm actuates
* RIA-6 and RIA-41 HIGH alarm actuates
* Spent Fuel Pool level = -3.5 feet decreasing Based on the above conditions, which ONE of the following describes which filters will be used to reduce off site releases and the status of the SF Pumps? Unit Reactor Building Purge filters and the Spent Fuel Cooling pumps will be A. 1 / ON B. 1 / OFF C. 2 / ON D. 2 / OFF 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 60 Unit 2 initial conditions:
* Spent Fuel Pool level = -3.5 feet decreasing Based on the above conditions, which ONE of the following describes which filters will be used to reduce off site releases and the status of the SF Pumps?
* Reactor power = 100% Current conditions:
Unit       Reactor Building Purge filters and the Spent Fuel Cooling pumps will be A.1 A. 1 /ION ON 1 I/ OFF B. 1 C.
C.22 ION
      / ON D. 2 I/ OFF
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 60 Unit 2 initial conditions:
* Reactor power = 100%
Current conditions:
* Reactor trip
* Reactor trip
* Controlling 2A Steam Generator Outlet Pressure fails HIGH Based on the above conditions, which ONE of the following describes the 2A AND 2B Turbine Bypass Valves (TBV's) response?
* Controlling 2A Steam Generator Outlet Pressure fails HIGH Based on the above conditions, which ONE of the following describes the 2A AND 2B (TBVs) response?
The 2A TBV's will fully open __ AND the 2B TBV's will fully open __ A. then return to throttled position / then return to throttled position B. then return to throttled position / and remain fully open C. and remain fully open / then return to throttled position D. and remain fully open / and remain fully open 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 61 Unit 3 initial conditions:
Turbine Bypass Valves (TBV's)
* Reactor power = 100%
The 2A TBV's TBVs will fully open _ _ AND the 2B TBV's TBVs will fully open _ _
* 3MS-112 & 3MS-173 (SSRH 3A13B Controls) are open and in MANUAL
A. then return to throttled position / then return to throttled position B. then return to throttled position / and remain fully open C. and remain fully open / then return to throttled position D. and remain fully open I/ and remain fully open
* 3MS-77, 78, 80, 81 (MS to SSRH's) are open and in AUTO Current conditions:
 
2010A NRC REACTOR OPERATOR EXAM 1 POINT 1
Question 61 Unit 3 initial conditions:
* power== 100%
Reactor power     100%
* 3MS-112       3MS-1 73 (SSRH 3A13B Controls) are open and in MANUAL 3MS-1 12 & 3MS-173
* SSRHs) are open and in AUTO 3MS-77, 78, 80, 81 (MS to SSRH's)
Current conditions:
* Reactor trips Based on the above conditions, which ONE of the following describes the plant response?
* Reactor trips Based on the above conditions, which ONE of the following describes the plant response?
A. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 close B. 3MS-112 & 3MS-173 close AND 3MS-77, 78,80, and 81 remain open C. 3MS-112 & 3MS-173 remains open AND 3MS-77, 78, 80, and 81 close D. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 remain open 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 62 Unit 1 plant conditions:
A. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 close 3MS-1 12 & 3MS-173 close AND 3MS-77, 78,80, B. 3MS-112                                  78, 80, and 81 remain open 3MS-1 12 & 3MS-173 remains open AND 3MS-77, 78, 80, and 81 close C. 3MS-112 D. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 remain open
* OP/1/A 1106/002A (Condensate And FDW System Startup And Shutdown)
 
Encl. 4.2 (Condensate And FDW System Startup) in progress
2010A              OPERATOR EXAM 2010A NRC REACTOR OPERATOR       EXAM 1I POINT POINT Question 62 Unit 11 plant conditions:
* 1 A Hotwell pump (HWP) operating
* OP/1/A OP/i/A 1106/002A    i 106/002A (Condensate And FDW System Startup And Shutdown) Encl.           End.
42 (Condensate And FDW System Startup) in progress 4.2
* 1iA  A Hotwell pump (HWP) operating
* CBP suction pressure = 45 psig slowly decreasing
* CBP suction pressure = 45 psig slowly decreasing
* The 3 square amber lights located above the HWP PUMP AMP gages are "ON"
* The 3 square amber lights located above the HWP                        HWP PUMP PUMP AMP gages are "ON" ON Procedure directs placing a standby Hotwell
* Procedure directs placing a standby Hotwell pump to "AUTO" Based on the above conditions, which ONE of the following describes what the Hotwell pump amber lights indicate AND the 1 B Hotwell pump response once the control switch is placed in AUTO? 1 A Hotwell pump is operating with __ and the 1 B Hotwell pump __ automatically start when its control switch is placed in Auto. A. low suction pressure / will B. low discharge pressure / will C. low suction pressure / will NOT D. low discharge pressure / will NOT .-c.J .\\t . . ...... ," , ........... . HVVP PUMP AMPS 1A 18 lC 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 63 Unit 3 plant conditions:
* Procedure                                                      Hotwell pump to "AUTO" AUTO Based on the above conditions, which ONE of the following describes what the Hotwell pump amber lights indicate AND the 1lB                          B Hotwell pump response once the control switch is placed in AUTO?
* Reactor power = 100%
1iAA Hotwell pump is operating with _ _ and the 1lB                        B Hotwell pump _ _ automatically start when its control switch is placed in Auto.
A. low suction pressure /I will B. low discharge pressure /I will C. low suction pressure /I will NOT D. low discharge pressure /I will NOT qB' ~
c.J .   . . .. . .. , ",
                                    . 1
                                .\ \t
                                .. . . .... .. . .
                                                    .-
4 Pk;MP AMPS HNP PUMP HVVP 1A         18                 IC lC
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 63 Unit 3 plant conditions:
* Reactor power =  100%
                      = 100%
* Fuel movement in progress in SFP
* Fuel movement in progress in SFP
* 3RIA-6 (Spent Fuel Pool) in HIGH alarm Based on the above conditions, which ONE of the following describes action(s) that will occur? A. 3RIA-6 audible alarm will automatically sound. B. the Spent Fuel Pool Ventilation system will be automatically isolated.
* 3RIA-6 (Spent Fuel Pool) in HIGH alarm Based on the above conditions, which ONE of the following describes action(s) that will occur?
C. the Spent Fuel Filtered Exhaust fans will be manually started from the Control Room. D. the Outside Air Booster Fans will be manually started from the Spent Fuel Pool entrance area.
A. 3RIA-6 audible alarm will automatically sound.
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 64 IA Pressure vs. Time w 90 ........................... : ........................... : ........................... . 0::: :J (f) (f) W 0::: 0.. . . <t: 80 ........................... .............................
B. the Spent Fuel Pool Ventilation system will be automatically isolated.
......................... .
C. the Spent Fuel Filtered Exhaust fans will be manually started from the Control Room.
1200 1210 1220 1230 TIME Based on the graph above, which ONE of the following describes the time at which SA-141 (SA to IA Controller) will automatically open? A. 1207 B. 1210 C. 1212 D. 1215 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 65 Unit 3 initial conditions:
D. the Outside Air Booster Fans will be manually started from the Spent Fuel Pool entrance area.
 
2010A NRC 2010A       NRC REACTOR OPERATOR       OPERATOR EXAM      EXAM I1 POINT POINT Question 64 IAPressurevs.Time IA Pressure vs. Time 100~-----------------------------------------'
100 w
uJ    90 .... .. ... . . . . . .. .... .. ... .. :... ... .... ... ... .. . .. . ... .. : ..... ... .. .. .. . . .. . . ... . .. . .
0:::
:J D
(f)
C))
(f)
C?)
W LU 0:::
0..
U
  <t:   80 . .. .. . . . . .. . .. ... ... . . .. .. . .... .... .. ... ..... .. ..........
                                                        ~
                                                                                          .
                                                                                              . .. .. ... . .. ... ... .. ...... .
70~----~~-----4-------+------~------------~
1200                                     1210                               1220                                       1230 ii rvl E TIME Based on the graph above, which ONE of the following describes the time at which SA-                                                   SA 141 (SA to IA Controller) will automatically open?
A. 1207 B. 1210 C. 1212 D. 1215
 
2010A NRC 2010A   NRC REACTOR REACTOROPERATOR OPERATOR EXAM   EXAM POINT 1I POINT Question 65 Question        65 Unit 33 initial Unit      initial conditions:
conditions:
* Reactor power
* Reactor          power == 100%
100%
* Fire  in  progress
* Fire in progress in area  in area of of 3TE 3TE switchgear switchgear Current conditions:
Current      conditions:
    ** 3TE 3TE busbus isis grounded grounded duedue to to water water spray spray
* Relay
* Relay 51      51G  actuated G actuated Based on Based      on the the above above conditions, conditions, which which ONE ONE ofof the the following following lists lists ONLY ONLY components components that that remain available?
remain      available?
A. 3A A. 3A MDEFDWP, MDEFDWP, 3B      3B MDEFDWP MDEFDWP B. 3A B. 3A MDEFDWP, MDEFDWP, 3C          HPIP 3C HPIP C. 3C C.        LPIP, 3B 3C LPIP,        3B MDEFDWP MDEFDWP D. 3C LPIP, 3C HPIP D.                      HPIP
 
2010A  NRC REACTOR OPERATOR 2010A NRC              OPERATOR EXAM EXAM I1 POINT POINT Question 66 Unit 22 plant conditions:
* Reactor in MODE 66
* RCS Boron == 2270 ppmb Based on the above conditions, which ONE of the following describes whether RCS Based meets the requirements of OP/2/AI1 Boron concentration meets                                502/007 (Operations OP/2/A/1502/007 (Operations number of OPERABLE Responsibilities) AND what is the minimum number Defueling/Refueling Responsibilities)
Source Range NIsNl's required by the same procedure?
A. meets I/ 22 B. meets /I 1 1 C. does NOT meet /I 22 D. does NOT meet I/ 1    I
 
2010A NRC REACTOR OPERATOR EXAM      EXAM 1I POINT Question 67 Unit 1I initial conditions:
* Reactor power = 100%
* Reactor power = 100%
* Fire in progress in area of 3TE switchgear Current conditions:
LDST level =
* 3TE bus is grounded due to water spray
* LOST               75 stable
* Relay 51 G actuated Based on the above conditions, which ONE of the following lists ONLY components that remain available?
                      = 75"
A. 3A MDEFDWP, 3B MDEFDWP B. 3A MDEFDWP, 3C HPIP C. 3C LPIP, 3B MDEFDWP D. 3C LPIP, 3C HPIP 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 66 Unit 2 plant conditions:
* Group 7 rod position =    = 94% withdrawn
* Reactor in MODE 6
* Makeup to LOST   LDST initiated from 1lB B BHUT
* RCS Boron = 2270 ppmb Based on the above conditions, which ONE of the following describes whether RCS Boron concentration meets the requirements of OP/2/A/1502/007 (Operations Defueling/Refueling Responsibilities)
    ** Neutron error =    = 0 stable Current conditions:
AND what is the minimum number of OPERABLE Source Range Nl's required by the same procedure?
HP-i 5 Bailey controller indicates 470 gallons added to LOST
A. meets I 2 B. meets I 1 C. does NOT meet I 2 D. does NOT meet I 1 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 67 Unit 1 initial conditions:
* 11 HP-15                                                    LDST
* Reactor power = 100%
* 11 B Bleed Transfer Pump secured Based on the above conditions, which ONE of the following would describe a diverse indication that 470 gallons of 1I B BHUT had been added to the LOST?
* LOST level = 75" stable
LDST?
* Group 7 rod position = 94% withdrawn
LDST level is approximately ____ inches and neutron error will become _ _ __
* Makeup to LOST initiated from 1 B BHUT
LOST A. 90 I positive B. 90 I negative C. 95 I positive D. 95 I negative O.
* Neutron error = 0 stable Current conditions:
 
* 1 HP-15 Bailey controller indicates 470 gallons added to LOST
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* 1 B Bleed Transfer Pump secured Based on the above conditions, which ONE of the following would describe a diverse indication that 470 gallons of 1 B BHUT had been added to the LOST? LOST level is approximately
Question 68 Which ONE of the following states the RCS Pressure Safety Limit (psig) AND which of the listed items is credited with ensuring the limit is NOT exceeded?
____ inches and neutron error will become ___ _ A. 90 I positive B. 90 I negative C. 95 I positive O. 95 I negative 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 68 Which ONE of the following states the RCS Pressure Safety Limit (psig) AND which of the listed items is credited with ensuring the limit is NOT exceeded?
A. 2500 I/ RPS trip settings B. 2500 I/ PORV C. 2750 I/ RPS trip settings.
A. 2500 I RPS trip settings B. 2500 I PORV C. 2750 I RPS trip settings.
D. 2750 I/ PORV
D. 2750 I PORV 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 69 Unit 1 plant conditions:
 
* Reactor power = 100%
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* 1A Core Flood Tank parameters:
Question 69 1 plant conditions:
o Pressure = 572 psig stable o Level = 12. 91 feet o Boron Concentration  
Unit 1
= 2010 ppmb
* Reactor power =      100%
* 1 B Core Flood Tank parameters:
                        = 100%
o Pressure = 590 psig stable o Level = 12.51 feet o Boron Concentration  
* 1AIA Core Flood Tank parameters:
= 1895 ppmb Based on the above condition, which ONE of the following describes the action(s) required (if any) in accordance with Tech Spec 3.5.1 (Core Flood Tanks)? A. NO actions required B. Enter LCO 3.0.3 immediately C. Restore 1 A CFT to OPERABLE within 1 hour ONLY D. Restore 1 B CFT to OPERABLE within 1 hour ONLY 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 70 Unit 1 plant conditions:
o Pressure = 572 psig stable o Level = 12. 91 feet o Boron Concentration =    = 2010 ppmb
* Reactor power = 100% Based on the above condition, which ONE of the following describes a condition that would require entry into a Tech Spec ACTIONS table? A. UST level = 5.6 feet B. BWST level = 47.3 feet C. 1 D RPS channel in Manual bypass D. 230KV Dacus Black and White lines isolated 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 71 Unit 1 plant conditions:
* 1 I B Core Flood Tank parameters:
* Reactor in MODE 5
o Pressure = 590 psig stable o Level = 12.51 12.51 feet o Boron Concentration =    = 1895 ppmb Based on the above condition, which ONE of the following describes the action(s) required (if any) in accordance with Tech Spec 3.5.1 (Core Flood Tanks)?
* Reactor Building Main Purge in operation Based on the above conditions, which ONE of the following will cause the RB Purge fan to trip? A. Inadvertent actuation of ES Channel 5 B. 1 RIA-45 reaches ALERT setpoint C. Suction piping pressure = 5 inches of water vacuum D. 1 PR-3 (RB PURGE CONTROL) closed 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 72 Unit 1 plant conditions:
A. NO actions required B. Enter LCO 3.0.3 immediately C. Restore 1 1A A CFT to OPERABLE within 11 hour ONLY D. Restore 1 IB B CFT to OPERABLE within 1    1 hour ONLY
* Reactor in MODE 6
 
* LPI DHR in progress using 1A LPI pump
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 70 Unit 1 I plant conditions:
* Reactor power = 100%
Based on the above condition, which ONE of the following describes a condition that would require entry into a Tech Spec ACTIONS table?
A. UST level ==5.6 5.6 feet B. BWST level == 47.3 feet C. 1 I D RPS channel in Manual bypass D. 230KV Dacus Black and White lines isolated
 
2010A NRC REACTOR OPERATOR EXAM 1
I POINT Question 71 Unit 1 1 plant conditions:
* Reactor   in MODE 5 ReactorinMODE5
* Reactor Building Main Purge in operation Based on the above conditions, which ONE of the following will cause the RB Purge fan to trip?
A. Inadvertent actuation of ES Channel 5 B. 1 I RIA-45 reaches ALERT setpoint C. Suction piping pressure = = 5 inches of water vacuum D. 1I PR-3 (RB PURGE CONTROL) closed
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 72 Unit 11 plant conditions:
* Reactor in MODE 6 IA LPI pump
* LPI DHR in progress using 1A
* Fuel movement in progress
* Fuel movement in progress
* NI-3 and 4 SR out of service
* NI-3 and 4 SR out of service
* RB Purge in progress Based on the above conditions, which ONE of the following describes when Reactor Building evacuation is required?
* RB Purge in progress Based on the above conditions, which ONE of the following describes when Reactor Building evacuation is required?
A. 1 NI-2 SR fails low B. 1 RIA-4 HIGH alarm C. 1 RIA-45 HIGH alarm D. 1 NI-2 WR fails high 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 73 For Operations personnel, which ONE of the following describes the required response to an Electronic Dosimeter dose alarm and when it is acceptable to deviate from that requirement?
A. 1I NI-2 Nl-2 SR fails low B. 1IRIA-4 RIA-4 HIGH alarm C. 1IRIA-45 RIA-45 HIGH alarm D. 11 NI-2 Nl-2 WR fails high
A. Exit the area immediately and contact RP I with RP permission B. Exit the area immediately and contact RP I with emergency dose limits in effect C. Move away from the area until alarm clears I with RP permission D. Move away from the area until alarm clears I with emergency dose limits in effect 2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 74 Unit 1 plant conditions:
 
* Blackout tab in progress
2010A NRC 2010A                   OPERATOR EXAM NRC REACTOR OPERATOR           EXAM I1 POINT POINT Question 73 ONE of the following describes the required response For Operations personnel, which ONE to an Electronic Electronic Dosimeter dose alarm and when it isis acceptable to deviate from that requirement?
* EOP step gives direction to "Initiate AP/11 (Recovery From Loss of Power)" Based on the above conditions, which ONE of the following describes the actions required to perform the EOP step? A. RO will perform AP/11 and SRO will wait until AP/11 has been completed to continue in the EOP. B. SRO will direct steps in AP/11 and then return to the EOP once AP/11 is complete.
immediately and A. Exit the area immediately             RP /I with RP permission and contact RP immediately and contact RP /I with emergency dose limits in effect B. Exit the area immediately B.
C. RO will begin AP/11 actions. SRO will continue in the EOP. SRO can re-direct RO actions. D. RO will begin AP/11 actions. SRO will continue in the EOP. RO must remain in AP/11 until the procedure is complete.
C. Move away from the area until alarm clears I/ with RP permission D. Move away from the area until alarm clears /I with emergency dose limits in effect
2010A NRC REACTOR OPERATOR EXAM 1 POINT Question 75 Unit 1 plant conditions:
 
* Reactor power = 100%
2010A NRC REACTOR OPERATOR EXAM I POINT 1
* 1SA3/B6 (FIRE ALARM) actuated
Question 74 1 plant conditions:
* Fire Alarm panel indication o point 0202071 (Unit 1 pipe trench room 348 north end) actuated Based on the above conditions, which ONE of the following describes who will be dispatched to the Unit 1 pipe trench room 348 per the Alarm Response Guide to determine the validity of the alarm AND a method used in RP/10001029 (Fire Brigade Response) to dispatch the fire brigade when it is required?
Unit 1
A. A Fire Brigade qualified operator 1 Plant Paging system B. A Fire Brigade qualified operator 1 Have Security dispatch fire brigade C. The Unit 1 BOP Reactor Operator 1 Plant Paging system D. The Unit 1 BOP Reactor Operator 1 Have Security dispatch fire brigade Oconee 2010*301 Exam References RO Exam: Steam Tables Unit 1 Loop A Narrow Range PT Plot SRO Exam: RP/O/8/10001001 (Emergency Classification)
* Blackout tab in progress Initiate AP/1
Technical Specification (TIS) 3.4.9 (Pressurizer)
* EOP step gives direction to "Initiate     AP/11I (Recovery From Loss of Power)"
TIS 3.8.8 (Distribution Systems -Operating)
Power)
Alarm Response Guide 1 SA-03 8-6 pages 2-28.   
Based on the above conditions, which ONE of the following describes the actions required to perform the EOP step?
A. RO will perform AP/11 AP/1 I and SRO will wait until AP/11 AP/1 1 has been completed to continue in the EOP.
B. SRO will direct steps in AP/l AP/111 and then return to the EOP once AP/1 AP/11I is complete.
AP/1 I actions. SRO will continue in the EOP. SRO can re-direct RO C. RO will begin AP/11 actions.
D. RO will begin AP/1 AP/11I actions. SRO will continue in the EOP. RO must remain in AP/1 1 until the procedure is complete.
AP/11
 
2010A NRC REACTOR OPERATOR EXAM I POINT 1
Question 75 1 plant conditions:
Unit 1
* Reactor power = 100%
1SA3IB6 (FIRE ALARM) actuated
* 1SA3/B6
* Fire Alarm panel indication o point 0202071 (Unit 1 I pipe trench room 348 north end) actuated Based on the above conditions, which ONE of the following describes who will be dispatched to the Unit 11 pipe trench room 348 per the Alarm Response Guide to determine the validity of the alarm AND a method used in RP/10001029 RP/1000/029 (Fire Brigade Response) to dispatch the fire brigade when it is required?
A. A Fire Brigade qualified operator 1 I Plant Paging system B. A Fire Brigade qualified operator 1 I Have Security dispatch fire brigade C. The Unit 11 BOP Reactor Operator 1   I Plant Paging system D. The Unit 1I BOP Reactor Operator 1   I Have Security dispatch fire brigade
 
Oconee Ocone  e 2010-301 2010*301 Exam Exam Refere nces References RO Exam:
Steam Tables Unit 1 Unit  1 Loop A Narrow Range        Plot Range PT Plot SRO Exam:
RP/O/8/10001001 RP/O/B/1000  /OO1 (Emergency     Classification))
(Emergency Classification Technical Specification (TIS)        (Pressurizer)
(T/S) 3.4.9 (Pressurizer)
TIS T/S  3.8.8 (Distribution System Systemss -
Operating)
Response Guide 11SA-03 Alarm Response                     B-6 pages 2-28.
SA-03 8-6
 
Exam Question # 56 UNIT 1 LOOP A NARROW RANGE PT PLOT 1
JcLj
                                                                                                                                                                            -
Main      Alarms    Graphics  Trends        F        List        Zoom    Print  Help 1QOCT-2003 09 [1 *ls
[1 FT    tIN      Ei 01    TURN ON                0L[      F TLMJk                                                                                                  -$PT NI      IIOIAIEr                                                      I.
[
119%                                        IFOkI                10 LOOP A                                                                                                      -  IF_I
[
                                                              -                                          -                                                                                        ii  1        t
                                                                                                                                                                                      ._
25O0 A
__--
2500-
                                                                                            -                                                                                F                  -                          -Il ID                                                                                                                                                                              II                          11:11 I 2400
                                                                                                                                                                .5                            I R                                                                                                                                                                                    E1          L[VEL
                                                                                                                                                            .5 2300--                                                                                                7              /                                                                                  )
                                                                                                                                                                                                                              .
5 1 INCH E                                                                                                                                                        .7
                                                                                                                                          /                                                                                  EC EINCH
                                                                                                                                                      .*
                                                                                                                      .*              .
S v                                      *.                                      IIITL [Fl
 
U                    .JOO p                                                                                                I                                                                              II
                    ..ooo E                                                                                            $                                    I 5                                        ,.
1900                                                                                                                                                                                                      0.2 I  i6
                                                                                                                                  //
p                        00-                     
                                                            -                                                                                                                            I    I I- I I I
Ill I                                        INCII I                                                                                                                                        __
7                                                    /                  7          ./            7                                                rH                                                        INCH 1                  1. 0                                                                                              S 7                              /
* v              /
              --
C                                    H            /              7            /  P                                                                  LLrI IE.LF I 1                                                  4 1 INCH I        -iso                                        I                                                                                                              0                          WI I              I            I      I                                              I              I      I          I 0U                                55                                                                  650                                00 51    DEGF      TH  [HELJ                      S5 DEGF                      I J            5 [EOF                                              U      14IIFI NR r
4            E                                              TEMPEIA I URE                                        DEGI LR                                CORE CUll. ET TEMF                          950 DEGJ S                  t        T TEMP                                    448 DEGF                                                -.
I      I II it,  I UI II    lilt        IL I Ft 1      F  I      t    TUE E          I It I F OT                      9 DFtI          TH I      NI    I LI I  T I oN            ro lIE          C\N(            Fl  111      [.                                                                                          - [I r
 
J                                  1=
TTO1O          WK= AN0NYIUS                              SEC LVL=            15        PR                                                                                                  Ocoriee Sim C                I
 
OConee  ZO~O -301 C
rn 1
            >w>>o Q#          KEY 1          B 2          0 3        A 4          0 5
(3)      A 6
: 0)          0 7        B 8
CO        B 9
(0        A B
0 0 03 C 0) 0 Cl > 0 Cl Cl Cl > 03 0 > 03 10
..I 11    -    A 12        C 13        B 14        A 15(31      0 16CO      0 17-1      0 18CO      C 19(0      A 200        0 21    -    C 22        B 23L.3      0 24        B 25(31      C 26CO      C 27-4        0 28CO        0 C) 0) C D> > 0) > > C) 0 0 29D        C 30C        C 31        C 32r        A 33C.5      A 34    .. B 35        A 36CO      A 37-4      0 38CO        0 39        B 40        C 41        0 C) 0 0 42        C 43        C 44        C 45          0 46CO        0 A
C) > 03 0) 0>
47-.1 48CO        C 49          B 50          B 51          A 52          C 53            0 54            B 0)
~ joi          0


Q# KEY 1 B 2 0 3 A 4 0 5 A 6 0 7 B 8 B 9 A 10 B 11 A 12 C 13 B 14 A 15 0 16 0 17 0 18 C 19 A 20 0 21 C 22 B 23 0 24 B 25 C 26 C 27 0 28 0 29 C 30 C 31 C 32 A 33 A 34 B 35 A 36 A 37 0 38 0 39 B 40 C 41 0 42 C 43 C 44 C 45 0 46 0 47 A 48 C 49 B 50 B 51 A 52 C 53 0 54 B 0 OConee
OConee   2010-301 c\J  0 0
-301 OConee 2010-301 Q# KEY 56 C 57 0 58 C 59 0 60 C 61 A 62 B 63 A 64 0 65 B 66 A 67 B 68 C 69 B 70 A 71 0 72 B 73 B 74 C 75 A}}
Q#       KEY (51  0)    C 56 UI 57         0 (Ii 58 C)        C 01 59 C)        0 0) 60   0    C C) 61   -
A C) 62 1%)        B C) 63
(.3      A C)    .
0 64 C) 65 Ui        B C) 66
: 0)        A C) 67
-1        B C) 68 C)        C C) 69 C)        B 4
70 0        A
-1 71 0
-4 72t)      B 4
73W B
4 74       C 75UI      A}}

Revision as of 19:28, 13 November 2019

Initial Exam 2010-301 Final RO Written Exam
ML101310324
Person / Time
Site: Oconee  Duke Energy icon.png
Issue date: 05/04/2010
From:
NRC/RGN-II
To:
Duke Energy Carolinas
References
Download: ML101310324 (80)


Text

ES-401 Site-Specific RO Written Examination Form ES-401-7 Cover Sheet U.S. Nuclear Regulatory Commission Site-Specific RO Written Examination Applicant Information Name:

Date: 04/07/2010 Facility/Unit: Oconee Region: I El II IDIIIg] El IIIIII D IV El D Reactor Type: W DEl CE D El BW ~ GE D El Start Time: Finish Time:

Instructions Use the answer sheets provided to document your answers. Staple this cover sheet on top of the answer sheets. To pass the examination, you must achieve a final grade of at least 80.00 percent. Examination papers will be collected 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> after the examination begins.

Applicant Certification All work done on this examination is my own. II have neither given nor received aid.

Applicants Applicant's Signature Results Examination Value 75 Points Applicants Applicant's Score Points Applicants Applicant's Grade Percent

NRC REACTOR OPERATOR 2010A NRC 2010A OPERATOR EXAM EXAM I1 POINT Question I1 Unit 1 Unit I plant conditions:

  • Reactor power == 100%100%
  • Pressurizer temperature == 648 °F of pressure ==55 psig
  • Quench tank pressure psig Based on the above conditions, which ONE of the following describes the expected Based

("F) downstream of I1RC-66?

tailpipe temperature (°F)

A. 162162 B. 228 C. 272 D. 648

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 2 Unit 1I plant conditions:

  • Rule 2 (Loss of SCM) in progress

lB 78 XSUR increasing

= 78"

=

  • Cooldown rate = 65°F I/ Y:zhr

%hr Based on the above conditions, which ONE of the following describes describes...

...

(1)) why SG levels are being increased?

(1 AND (2) how EFDW flows will be controlled in accordance with Rule 2?

A. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits B. (1) Ensure secondary inventory available for heat transfer if SG feed is lost (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase C. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow should be stopped until cooldown rate is in compliance with Tech Spec limits D. (1) Ensure boiler-condenser heat transfer is established (2) EFDW flow will be reduced in an effort to comply with Tech Spec limits but SG levels must continue to increase

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM I1 POINT POINT Question 33 Unit 11 plant conditions:

  • RCS pressure == 88 psig decreasing decreasing Building pressure == 27
  • Reactor Building 27 psig increasing
  • 11BB LPI Pump failed to start Based onon the above conditions, which ONE of the following describes the guidance guidance provided in EOP Enclosure 5.1 (ES Actuation) regarding the LPI pumps and system operation?

FOP Enclosure 5.1 (ES Actuation)....

EOP Actuation) ....

A. directs continued operation with only the 1 A LPI pump and no re-alignment of LPI IA header flows B. directs continued operation with only the 1 A LPI pump and manually re-aligns LPI IA flow down both the 11A 1 B LPI headers A and 1 C. utilizes the 1A and the 1 1A 1C C LPI Pump and aligns flow down both headers with 1 1LP-9 LP-9 and 10 closed D. utilizes only the 11 C LPI Pump and aligns flow down both headers with 1I LP-9 & 10 open

2010A NRC REACTOR OPERATOR EXAM 1

I POINT Question 4 Unit 1I plant conditions:

  • Reactor power = = 100%
  • 1ITATA and 1ITB TB de-energized Based on the above conditions, which ONE of the following indicates the Thot and Tcold values expected approximately 15 minutes after the Reactor trip?

Thot would be approximately _ _ _ oF and Tcold would be approximately _ _ _ oF.

A. 534 / 532 B. 570 / 540 C. 556 / 554 D. 585 /I 555

2010A NRC REACTOR OPERATOR 2010A NRC OPERATOR EXAM EXAM I1 POINT Question 55 Unit I1 initial initial conditions:

  • Reactor in MODE 55
  • RCS pressure == 00 psig Normal LPI decay
  • Normal decay heat in service heat removal in
  • 1C pump operating 1C LPI pump Blackout occurs
  • Unit Blackout Current conditions:

MFBs re-energized from CT-5

  • MFB's Based on the above conditions, which ONE of the following describes actions required AP/26 (Loss of Decay heat Removal)?

by AP126 A. Start 1 IC AP/11I (Recovery from Loss of Power)

C LPI pump AND initiate AP/l B. Start 1 1 C LPI pump AND initiate the Blackout tab of the EOP C. Feed and steam SG's SCs to maintain CETC < 246°F AND initiate AP/l

<246°F AP/111 (Recovery from Loss of Power)

D.

D. Feed and steam SG's SGs to maintain CETC < 246°F AND perform AP/26 Encl.

<246°F End. 5.6 (Venting LPI Pumps and Suction Lines)

2010A NRC 2010A NRC REACTOR OPERATOR EXAM REACTOR OPERATOR EXAM I1 POINT POINT Question 66 Question Unit I1 plant Unit plant conditions:

Reactor trip

  • Reactor trip has just occurred has just occurred Total RCP
  • Total RCP seal flow ==00 gpm injection flow seal injection gpm Cooling is Component Cooling
  • Component is unavailable unavailable Based on Based on the the above conditions, which ONE ONE of describes the procedure of the following describes performance is whose performance is directed directed by the EOP and and why?

Initiate ...

Initiate...

AP/20 (Loss of CC) to restore Component Cooling A. API2O AP/20 (Loss of B. API2O of CC)

CC) to to ensure ensure letdown letdown is is isolated isolated C. AP/25 (SSF EOP) to align an alternate letdown flowpath AP/25 (SSF EOP) to align an alternate source of seal injection D. AP125

2010A NRC 2010A REACTOR OPERATOR NRC REACTOR OPERATOR EXAM EXAM I1 POINT POINT Question 77 Question Unit 11 initial Unit initial conditions:

conditions:

  • Reactor power ==90%

Reactor power 90%

Current conditions:

  • Reactor power == 70% decreasing decreasing
  • RCS pressure == 2165 psig psig slowly slowly decreasing decreasing
  • Pressurizer level level == 228 inches slowly slowly decreasing decreasing temperature ==640°
  • Pressurizer temperature 640°F slowly decreasing F slowly decreasing
  • Pressurizer heaterheater bank 1 I (Group A and K) is ONON
  • Pressurizer heater banks 2, 3, and and 4 are in AUTO and are OFF Based on the aboveabove conditions, which ONE describes the status of the ONE of the following describes pressurizer and the pressurizer saturation circuit?

The pressurizer is _ _ _ _ AND the pressurizer saturation circuit _ _ __

A. subcooled I/ is responding as expected B. subcooled I/ has failed C. saturated I/ is responding as expected D. saturated /I has failed

2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 8 Unit 2 initial conditions:

  • Time = = 1200:00
  • Reactor power = = 100%
  • Both MFDW Pumps tripped Current conditions:
  • Time = = 1201 :45
  • Reactor power = = 30% decreasing
  • Loop A SCM = O°F 0°F stable
  • Rule 1 1 (ATWS/Unanticipated Nuclear Power Production) in progress
  • 2SA9/D2 (RC Pump Vibration High)High ) Actuated
  • Rule 2 (Loss of SCM) initiated Based on the above conditions, which ONE of the following describes the required (RCPs) and the reason for those actions?

actions regarding Reactor Coolant Pumps (RCP's)

A. Leave RCP's RCPs operating to minimize core damage from an increase in DNBR that would occur if secured RCPs operating to provide flow through the core for heat removal B. Leave RCP's C. Secure RCP's RCPs to reduce the amount of RCS inventory lost D. Secure RCP's RCPs before the RCS can evolve to a Void fraction of> 70%

2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 9 Unit 11 plant conditions:

  • SGTR tab in progress
  • 1 SC isolated 1 B SG
  • 1A loop Tcold = 440°F decreasing
  • 1B SIG TUBE/SHELL DT =

lB S/G = (-)72°F Based on the above conditions, which ONE of the following describes:

(1) the reason the SGTR tab directs minimizing core SCM during cooldown AND (2) the initial method used to reduce the SCM?

To reduce the _--l(....:,1J,..)

(1) _ (2)

AND reducing SCM would initially be attempted by _-,,(2=..)<---,-

A. primary to secondary leak rate /I de-energizing Pzr heaters and cycling Pzr spray B. primary to secondary leak rate /I cycling the PORV C. compressive stresses in the 1 I B SG SC / de-energizing Pzr heaters and cycling Pzr spray D. compressive stresses in the 1 lB SC /I cycling the PORV B SG

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 10 1 plant conditions:

Unit 1

  • Both MFB's MFBs de-energized
  • TDEFWP operating Based on the above conditions, which ONE of the following describes the status of bearing oil cooling water supply to the TDEFWP?

TDEFWP bearing oil cooling is currently provided by and it _ _ __

provide adequate cooling water flow until AC power has been re-established.

A. CCW I/ will B. HPSW /I will C. CCW /I will NOT D. HPSW /I will NOT

NRC REACTOR OPERATOR 2010A NRC 2010A OPERATOR EXAM EXAM I1 POINT POINT Question II 11 Unit 1 1 initial conditions:

  • Station Blackout occurred
  • Neither KHU automatically started Start of BOTH KHUs Emergency Start Manual Emergency
  • Manual is required KHU's is Time == 1201 1201 switch placed in START Emergency Start Channel A control room switch
  • Keowee Emergency Time = 1202 1202
  • Keowee Emergency Start Channel B B control room switch placed in START Based on the above conditions, which ONE of the following describes the time at which KHUs have received an Emergency Start signal AND the Generator Output BOTH KHU's KHUs that would indicate proper operation?

Voltage (KV) of the KHU's 1201 I 13.8 A. 1201 B. 1202 I 13.8 1201 I 4.16 C. 1201 1202 I/ 4.16 D. 1202

NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I POINT 1

Question 1212 has experienced aa Which ONE of the following would indicate that the 2DIC inverter has panelboard would then receive power?

loss of AC output voltage AND how 2KVIC panelboard loss LOAD CONNECTED TO A. LOAD EMERGENCY light on the inverter will be illuminated TO EMERGENCY illuminated AND panelboard 2KVIC will automatically be panelboard be energized from panelboard 2KRA (regulated power).

B. LOAD CONNECTED TO EMERGENCY light on the inverter will be illuminated AND panelboard 2KVIC will automatically be energized from Unit 3.

C. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panelboard panel until manually aligned to panelboard 2KRA board will be de-energized until (regulated power).

D. INVERTER OUTPUT LOW light on the Inverter be illuminated AND the 2KVIC panelboard will be de-energized until manually aligned to receive power from Unit 3.

2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 13 Plant conditions:

  • 1 CA Battery Charger fails - output voltage =

1 - = 0 VDC

  • 1I CA Battery voltage =

= 126 VDC

  • 11 DCB Bus voltage = 123 VDC

=

  • DCA/DCB Bus voltage =

Unit 2 DCAlDCB = 124 VDC

  • DCA/DCB Bus voltage =

Unit 3 DCAlDCB = 127 VDC Based on the above conditions, which ONE of the following will automatically supply power to 11 DIA panelboard?

A. 1DCB Bus B. 11CA CA Battery C. Unit 2 DC Bus D. Unit 3 DC Bus

2010A NRC REACTOR OPERATOR EXAM 11 POINT Question 14 I and 2 initial conditions:

Unit 1

  • A and B LPSW pump operating Current conditions:
  • A LPSW pump amps = 15 - 35 fluctuating

-

  • B LPSW pump amps = = 55 stable
  • LPSW HDR PRESS = = rapidly fluctuating between 60 & & 75 psig Based on current conditions, which ONE of the following describes the status of the LPSW pumps and what actions are directed by AP/24 (Loss of LPSW)?

A. The A LPSW pump is cavitating 1/ Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW Pump C PumpC B. The A LPSW pump has a sheared shaft 1 I Place the Unit 1/2 STANDBY LPSW PUMP AUTO START CIRCUIT in DISABLE then stop LPSW Pump A and start LPSW Pump C C. The A LPSW pump is cavitating 1 / Start LPSW Pump C then stop LPSW Pump A D. The A LPSW pump has a sheared shaft 1 I Start LPSW Pump C then stop LPSW Pump A

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM 1 POINT 1 POINT Question 15 15 Unit 33 initial Unit initial conditions:

  • Time=1200 Time = 1200
  • Reactor power == 45% stable
  • IA and AlA are lost to 3FDW-315 Current conditions:

Time=1300

  • Time = 1300
  • RCS Tave = = 550°F stable Based on the above conditions, which ONE of the following describes the expected SG level and the status of 3FDW-315?

ASSUME NO OPERATOR ACTIONS HAVE OCCURRED A. 25" 25 Stu s/u level/failed level I failed open B. 25 25" Stu level I controlling SG level at setpoint s/U level/controlling C. 30" 30 XSUR / failed open 30 XSUR I/ controlling SG D. 30" Sc level at setpoint

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM I1 POINT POINT Question 1616 1 plant conditions:

Unit 1

  • Reactor power == 50% stable
  • Units 2 and 33 in MODE 55 AP/34 (Degraded Grid)
  • AP134 in progress due Grid) in due to grid disturbance disturbance
  • BOTH KHU's generating to BOTH KHUs to the grid grid
  • All but ONE of the Offsite Sources required by Tech Spec 3.8.1 (AC Sources-Operating) are lost Based on the above conditions which ONE of the following describes ...
1) actions required byTech
1) 3.8.1 ?

Spec3.8.1 by Tech Spec AND

2) a condition that would require manually separating BOTH KHUs KHU's from the electrical grid in accordance with AP/34?

A. Immediately enter Tech Spec LCO 3.0.3 I/ KHU High Generator Output Voltage B. Immediately enter Tech Spec LCO 3.0.3 I/ KHU Low Generator Output Voltage C. Energize BOTH Standby Busses within one hour I/ KHU High Generator Output Voltage D. Energize BOTH Standby Busses within one hour I/ KHU Low Generator Output Voltage

2010A 2010A NRC OPERATOR EXAM NRC REACTOR OPERATOR EXAM 11 POINT POINT Question 17 17 Unit 11 initial conditions:

  • Reactor power == 100% 100%
  • lCHPlpumpOOS 1C HPI pump OOS Current conditions:
  • 1A 1A and lB Main FDW pumps tripped 1B Main
  • Condensate Booster Pumps unavailable
  • All EFDW pumps unavailable
  • 1 1AA and 1 B SG Outlet pressure == 860 psig slowly decreasing lB
  • RCS pressure == 2317 psig increasing Based on the above conditions, which ONE of the following describes describes the required operator action(s) in accordance with the EOP?

A. Establish SSF ASW flow to the SG and establish SG levels at 240 inches.

B. Establish SSF ASW flow to the SG and do NOT establish a level in the SGs.

SG5.

C. Establish HPI forced cooling and open 1 IHP-410.

HP-41 O.

D. Establish HPI forced cooling and open 1IHP-409.

HP-409.

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 18 Unit 1I initial conditions:

  • Reactor power = = 100%
  • 1 lAMSLBoccurs A MSLB occurs Current conditions:
  • Reactor has tripped
  • RCS Tave = 544T slowly increasing

= 544°F

  • 1 1A A SG Pressure = 0 psig
  • 11 B SG Pressure = = 990 psig slowly increasing
  • Reactor Building pressure = = 0.2 psig stable Based on the above conditions, which ONE of the following describes the status of the TDEFWP and how subsequent operation of the TDEFWP would be performed?

TDEFWP is is...

...

A. operating and can be secured with TDEFWP control switch before AFIS is reset B. operating and can be secured with TDEFWP control switch ONLY after AFIS is reset C. NOT operating and can be started with TDEFWP control switch before AFIS is reset D. NOT operating and can be started with TDEFWP control switch ONLY after AFIS is reset

2010A NRC 2010A OPERATOR EXAM REACTOR OPERATOR NRC REACTOR EXAM I1 POINT POINT Question 19 Question 19 Unit 11 plant Unit plant conditions:

  • Reactor power 70% stable power == 70% stable level == 210
  • Pressurizer level slowly decreasing 210" slowly decreasing

(RC VOLUME HP-i 20 (RC failed closed CONTROL) failed AP/14 (Loss of

  • AP/i4 Normal HPI of Normal Makeup and/or RCP HPI Makeup RCP Seal Injection) initiated Seal Injection) initiated Based on Based on the above conditions, which ONE ONE of the following describes of the initial actions describes the initial required toto control control Pressurizer AND the minimum allowed Pressurizer level level AND Pressurizer level level in accordance with AP/i4?

(inches) in AP/14?

Throttle ...

Throttle...

1HP-26 I/ 200 A. 1HP-26 200 B. 1 HP-26 I/ 80 1HP-26 C. 1 HP-122 (RC VOLUME CONTROL BYPASS) I/ 200 IHP-i22(RC D. 1 HP-i 22 (RC VOLUME CONTROL BYPASS I/ 80 1 HP-122

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 20 I initial conditions:

Unit 1

  • Reactor in MODE 6 Current conditions:
  • Fuel Transfer Canal level decreasing
  • East fuel carriage is in the RB and empty
  • West fuel carriage is in the SFP and empty
  • Reactor Building Main Fuel Bridge in transit to the upender with a spent fuel assembly in the mast
  • Section 40 4D (Fuel Transfer Canal Flooded) of AP126 AP/26 (Loss of Decay Heat Removal) initiated fit actions Based on the conditions above, which ONE of the following describes the first required to be taken in accordance with Section 40 4D (Fuel Transfer Canal Flooded)?

A. Close 1 I SF-1 SF-i and 1I SF-2 (East/West Transfer Tube Isolations)

B. Verify SF system aligned for refueling cooling mode and stop 2B SF cooling pump C. Place the fuel assembly into the East Upender and position the West Fuel Carriage to the RB D. Place the fuel assembly into the East Upender and position the East Fuel Carriage to the SFP

2010A NRC 2010A OPERATOR EXAM REACTOR OPERATOR NRC REACTOR EXAM 11 POINT POINT Question 21 Question 21 Which ONE Which ONE of of the conditions that describes conditions the following describes indicate RIA-54 that indicate RIA-54 is unable to is unable to perform its perform its function function AND releases are batch releases AND ifif batch allowed while are allowed RIA is while the RIA is inoperable?

inoperable?

A. Counts A. Counts dodo not not increase increase when Source Check when Source Check is performed II Batch is performed releases are Batch releases are allowed.

allowed.

B. Counts B. Counts dodo not increase when not increase when Source Check is Source Check performed I Batch releases are is performed are NOT NOT allowed.

allowed.

C. Sample pumppump found OFF Batch releases are allowed.

OFF I Batch Sample pump found OFF I Batch releases are NOT D. Sample D. NOT allowed.

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 22 Unit 2 plant conditions:

  • 3 of the 5 fire detectors in the West penetration room will be simultaneously removed for repair and/or replacement Based on the above conditions, which ONE of the following describes the compensatory actions required by SLC 16.9.6 (Fire Detection Instrumentation)?

Within 1 detectors....

1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> of removing the detectors ....

A. Perform Channel Functional Test on remaining fire detectors ONLY B. Establish a fire watch ONLY C. Perform Channel Functional Test on remaining fire detectors AND stage 4 additional fire extinguishers in the West Penetration Room.

D. Establish a fire watch AND stage 4 additional fire extinguishers in the West Penetration Room.

NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I POINT 1

Question 23 Unit 33 plant conditions:

  • Loop A and Loop B SCM's == 0°F 8 SCMs oaF stable a
  • Core SCM == (-)5°F

(_)5 F flashing with a red background Based on the above conditions, which ONE of the following describes the status of the reactor core?

A. saturated and covered B. saturated and partially uncovered C. superheated and covered D. superheated and partially uncovered

2010A NRC REACTOR OPERATOR EXAM 1

I POINT Question 24 Unit 2 initial conditions:

  • Reactor power = = 100%

Current conditions:

  • 2SA2/B4 (RC AVERAGE TEMP HIGH/LOW) actuated
  • Loop 'A' A Controlling Thot fails high (620°F)

Based on the above conditions, which ONE of the following describes the initial ICS response AND requirements placed on the operator when stabilizing the plant?

ICS will Feedwater flow AND SRO approval required prior to making the initial manual adjustment to Feedwater flow in accordance with OMP 1-18 (Implementation Standard During Abnormal And Emergency Events).

A. increase / is B. increase / is NOT C. decrease / is D. decrease / is NOT

2010A 2010A NRC OPERATOR EXAM NRC REACTOR OPERATOR EXAM I1 POINT POINT Question 25 Unit I1 initial initial conditions:

  • Reactor power == 25% slowly increasing

Current conditions:

  • Reactor power == 22% decreasing decreasing Based on the above conditions, which ONE of the following describes the procedure(s) that will be utilized to direct plant activities AND the expected Steam Generator pressure (psig)?

A. UNPP UNPPtab tab I 885 B. UNPP tab I 1010 C. Plant Operating Procedures I 885 D. Plant Operating Procedures I 1010

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 26 Unft 1I plant conditions:

Unit

  • Reactor power = = 100%
  • 2SA-18/A11 (TURBINE BSMT WATER EMERGENCY HIGH LEVEL) actuated
  • NEO reports water level in Turbine Building basement increasing Based on the above conditions, which ONE of the following describes the required AP/lO0 (Turbine Building Flood)?

actions directed by AP/1 Manually trip the reactor and...

and ...

A. align Station ASW pump for use B. secure all LPSW pumps C. secure all operating CCW pumps D. place all HPSW pump switches to "OFF"OFF

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM I1 POINT POINT Question 27 Unit I1 plant conditions:

Unit

  • Core SCM == 0°F OaF
  • LOCA Cooldown tab in progress CETC's == 395°F slowly decreasing
  • 1 LP-1 03 (POST LOCA BORON DILUTE) will NOT 1LP-103 NOT open Based on the above conditions, which ONE of the following valves is required to be opened in accordance with the LOCA CD tab to establish post LOCA boron dilution dilution flow?

A. 1LP-3 1LP-3 1LP-l9 B. 1LP-19 C. 1LP-104 1LP-I04 D. 1LP-105

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 28 Unit 3 initial conditions:

  • Time = 0300
  • Reactor power = = 100%
  • CT-3 Lockout occurs Current conditions:
  • MFB re-energized
  • 6900V power still unavailable
  • 3A = 3.9 gpm slowly decreasing
  • 3A2 RCP SI flow = = 3.7 gpm slowly decreasing
  • 3B1 RCP SI flow = = 3.5 gpm slowly decreasing
  • 3B2 RCP SI flow = = 3.4 gpm slowly decreasing
  • Seal Inlet Header Flow = 40 gpm stable Based on the above conditions, which ONE of the following describes the status of the following RCP support systems valve(s) two minutes later?

A. ONLY 3HP-21 has closed B. ONLY 3HP-21 AND 3HP-31 have closed C. ONLY ALL individual seal return valves and 3HP-21 have closed D. ALL individual seal return valves, 3HP-21, and 3HP-31 have closed

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 29 1 plant conditions:

Unit 1

  • Reactor power = = 100%

1 CC-8 (CC RETURN PENT (54) OUTSIDE BLOCK) fails closed

  • 1 1 LPSW-6 (UNIT 1I RCP COOLERS SUPPLY) fails closed Based on the above conditions, which ONE of the failed valves will require ALL RCPs to be secured in accordance with AP/16 (Abnormal Reactor Coolant Pump Operation) and why?

1 CC-8 /I due to high RCP motor stator temperatures A. 1 CC-8 /I due to high RCP radial bearing temperatures 1CC-8 B. 1 1 LPSW-6 /I due to high RCP motor stator temperatures C. 1 I LPSW-6 /I due to high RCP radial bearing temperatures D. 1

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 30 Unit 1 I initial conditions:

  • Reactor power = = 100%
  • 1 1A A CC pump operating Current conditions:
  • 1 ICC-7 CC-7 fails closed Based on the above conditions, which ONE of the following describes the expected plant response?

A. Letdown must be manually isolated and NEITHER CC Pump will be operating B. Letdown must be manually isolated and BOTH CC Pumps will be operating C. Letdown will be automatically isolated and NEITHER CC Pump will be operating D. Letdown will be automatically isolated and BOTH CC Pumps will be operating

2010A NRC 2010A NRC REACTOR OPERATOR EXAM REACTOR OPERATOR EXAM I1 POINT POINT Question 31 Question 31 Unit 33 initial Unit initial conditions:

conditions:

Reactor in

  • Reactor in MODE MODE 44
  • LPI LPI DHR DHR alignment for cooldown alignment for in progress cooldown in progress Current conditions:

Current (LPI HOT 3LP-3 (LPI

HOT LEG not open SUCTION) will not open 3LP-12 (3A

  • 3LP-12 (3A LPI COOLER OUTLET) failed closed LPI COOLER closed Based on Based on the above ONE of above conditions, which ONE the following describes the of the the effect of of the ECCS-LPI train availability?

failures on ECCS-LPI 3LP-3 failure The 3LP-3 impact availability and the failure of 3LP-12 impact ECCS-LPI train availability 3LP-12

_ _ impact ECCS-LPI train availability.

A. Does I/ Does B. Does I/ Does NOT NOT C. Does NOT I/ Does D. Does NOT I/ Does NOT

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 32 Unit 11 plant conditions:

  • RCS pressure = = 365 psig
  • An attempt is made to open 1 ILP-1 LP-1 (LPI RETURN BLOCK FROM RCS) 1 LP-1 will open Based on the above conditions, which ONE of the following describes if 1 AND the reason 1 I LP-1 LP-l has an interlock?

A. yes /I prevent overpressurizing LPI suction piping B. yes I/ ensure delta p across 1 I LP-1 LP-I will allow it to open C. No /I prevent overpressurizing LPI suction piping D. No /I ensure delta p across 1 1 LP-1 will allow it to open

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM I1 POINT Question 33 Unit 11 initial initial conditions:

  • Reactor power == 100% 100%

Current conditions:

  • RCS pressure = 1350 psig decreasing

= 1350

  • Reactor Building pressure == 4.8 psig increasing
  • ES Channel 22 did NOT actuate Based on the above conditions, which ONE of the following describes ALL safety injection pumps that have AUTOMATICALLY started?

A. 1A 1A HPI, 1B HPI, 1A LPI, 1B LPI HPI,IBHPI,1ALPI,IBLPI B. 1A IA HPI, 1C 1C HPI, 1A IA LPI, 1B lB LPI C. 1A HPI, 1B lB HPI, 1A LPI ONLY D. 1A HPI, 1A LPI ONLY 1ALPI

NRC REACTOR OPERATOR 2010A NRC 2010A OPERATOR EXAM EXAM I1 POINT POINT Question 34 Unit I1 plant conditions:

  • OP/i/All 103/002, (Filling and Venting RCS) Enclosure 4.14 (Establishing Pzr OP/1/A/1103/002, Steam Bubble And RCS Final Vent) in progress
  • Quench Tank level level == 82 82 inches
  • Quench Tank pressure = 0.5 psig

= 0.5 psig

  • The Pressurizer is is vented toto the Quench Tank for 30 30 minutes minutes Based on the above conditions, which ONE of the following describes describes QT parameters that would indicate that Pzr Steam Bubble Formation is complete?

QT level (inches) QT pressure (psig)

A. 82.1 0.6 B. 84.1 0.6 C. 82.1 2.5 D. 84.1 2.5

NRC REACTOR 2010A NRC 2010A REACTOR OPERATOR EXAM EXAM I1 POINT POINT Question 35 normal power supply to the 1A describes the normal Which ONE of the following describes 1ACC CC pump pump AND the emergency backup source of power that will be supplying the Main Main Feeder Offsite Power due Buses following aa Loss of Offsite to aa Switchyard Isolation?

due to 1XL I/ KHU via A. 1XL via overhead path path B. 1XL I/ KHU via underground path B. 1XL 1XS1 I/ KHU via overhead path C. IXS1 1XS1 I/ KHU via underground path D. 1XS1 D.

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 36 Unit 3 plant conditions:

  • Reactor power = = 100%
  • Channel A AND Channel E narrow range RCS pressure fails HIGH Based on the above conditions, which ONE of the following describes the RPS trip that will trip the reactor AND the RCS pressure that will result in an ES digital channels 1I & 2 actuation?

ASSUME NO OPERATOR ACTIONS A. Variable Low Pressure I/ 1600 1810 B. Variable Low Pressure /I 1810 C. High Pressure I/ 1600 D. High Pressure /I 1810

2010A NRC 2010A REACTOR OPERATOR EXAM NRC REACTOR EXAM I1 POINT POINT Question 37 Unit 22 Unit plant conditions:

  • Reactor power == 100%

100%

  • Pressure Bistable 2B RPS Channel Low RCS Pressure "tripped" state Bistable failed in tripped
  • 2B RPS Channel Channel in "Manual Bypass in Manual Bypass" Current conditions:

Current "Shutdown Bypass

  • 2C RPS Channel inadvertently placed in Shutdown Bypass" Based on the above conditions, which ONE of the following describes the impact (if any) on reactor power and control room alarms?

on With NO additional operator actions, reactor power will be and the associated RPS Channel C statalarm for bistable trip will be actuated.

A. 0% /I Low pressure B. 0% I High pressure 100% I Low pressure C. 100%

D. 100% I/ High pressure

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 38 Which ONE of the following would result in a trip of the 11 D RPS Channel AND the 11 D CRD Breaker?

A. Reactor Building pressure bistables in the 1AIA and 1I B RPS channels fail in the "tripped" tripped state tripped state B. Reactor Building pressure bistable in the 11 D RPS channel fails in the "tripped" C. RC pressure test module for 1I D RPS channel placed in "Test Operate Test Operate" D. Loss of the 11KVID KVID panelboard

NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I1 POINT Question 39 Unit 22 initial initial conditions:

  • Reactor power == 100% 100%

Current conditions:

Current

  • MSLBMSLB occurs occurs pressure == 1580
  • RCS pressure slowly increasing 1580 psig slowly
  • RB peak pressure pressure == 2.8 psig Based on the above conditions, which ONE of the following describes valves that have received aa signal to CLOSE?

A. 2CC-7 B. 2LWD-1 c.

C. 2LPSW-6 D. 2LPSW-1062

2010A NRC 2010A NRC REACTOR OPERATOR EXAM REACTOR OPERATOR EXAM I1 POINT Question 40 Unit 33 plant conditions:

  • Reactor power=

power = 100%

100%

  • breaker trips OPEN 3KVIA AC Vital Power Panelboard supply breaker
  • "C" WR ES Analog Channel C RCS pressure signal fails LOW pressure signal Based on the above conditions, which ONE of Based of the following describes which (if any) ES ES digital channels have actuated?

digital

- - - - have actuated.

A. NO channels B. Channels 11 thru 4 C. ONLY channels 2 AND 4 D. ONLY channels 1 1 AND 3

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 41 iplant Unit 1 plant conditions:

  • Time = 03:00
  • Reactor power = = 100%
  • 1 lB and 1IC Band C RBCUs operating in HIGH speed
  • ES channels 1-6 actuate Based on the above conditions, which ONE of the following describes RBCU status at 03:02?

A. 1B lB and 1C RBCUs operating in HIGH speed and 1A RBCU OFF B. 1lB

8. and C RBCUs Band RBCU5 operating in LOW speed and 11A A RBCU OFF C. ALL RBCUs RBCU5 operating in LOW speed D. ALL RBCUs will be OFF

2010A NRC REACTOR OPERATOR EXAM 2010A NRC EXAM I1 POINT POINT Question 42 Question Which ONE of the following describes the range of BWST BWST levels where RBS pump pump suction would be aligned to both the RBES and the BWST simultaneously AND what action(s) would be required if 11 LP-22 failed to close when isolating the BWST?

BWST?

When performing Enclosure 5. 12 12 (ECCS Suction suction sources Suction Swap to RBES) both suction are aligned when BWST level are level is between (feet) AND _ _ _ __

15 - 9 I/ stop the lB A. 159 1B LPI pump AND 1 lBB RBS pump B. 15 159- 9 I/ Maximize total LPI flow << 3100 gpm 9 - 6 I/ stop the 1 C. 9-6 B LPI pump AND lB lB 1B RBS pump D. 99 - 6 I/ Maximize total LPI flow <

- < 3100 gpm

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 43 Unit 3 initial conditions:

  • Reactor power = = 35% slowly increasing Current conditions:
  • Reactor power = = 30% decreasing
  • PCB 58 and PCB-59 (Unit 3 Generator Output Bkrs) OPEN
  • Turbine master in HAND O3X2060 (ICS TURBINE LOADING STATUS) = FALSE
  • OAC point 03X2060 Based on the above conditions, which ONE of the following describes the operation of the Turbine Bypass Valves (TBV's)?

(TBVs)?

____ is being compared to Turbine Header Pressure setpoint to develop the TBVs are controlling at controlling error signal AND TBV's psig?

A. Turbine Header Pressure /I 885 B. Turbine Header Pressure /I 935 C. Steam Generator Outlet Pressure /I 885 D. Steam Generator Outlet Pressure /I 935

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 44 Unit 11 initial conditions:

  • Reactor power = = 70% stable Current conditions:
  • 1 1HPE-6 HPE-6 (Heater 1A1 IA1 Bleed Inlet) closed Based on the above conditions, which ONE of the following predicts the impact of the malfunction on Feedwater flow assuming no operator action AND the procedure which will be used to reopen 1IHPE-6?

HPE-6?

Feedwater flow will stabilize at a _ ____:_--- value than the pre-transient level AND

____ will be used to reopen 1 I HPE-6.

0P111A11106123 (High and Low Pressure Extraction)

A. higher /I OP/1/A/1106/23 B. higher I/ OP/1/A/1106/002 OPI1/A111061002 (Condensate and FDW system)

C. lower I/ OP/1/A/1106/23 (High and Low Pressure Extraction)

D. lower /I OP/1/A/1106/002 (Condensate and FDW system)

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 45 Unit 11 initial conditions:

  • Reactor power = = 100%

Current conditions:

  • 1 1 FDW-33 (1A(IA SU FDW Block) FAILS closed Based on the above conditions, which ONE of the following describes the expected Steam Generator levels 20 minutes after the trip?

ASSUME NO OPERATOR ACTIONS 1A SG level =

___ AND 1B lB SG level

= ___

A 25" A. 25 StuS/U t/ 25" 25 StU S/U 8.

B 12" 12 StUS/U t/ 25" 25 StU S/U C. 30 XSUR t/ 25" C 30" S/U 25 StU D. 30" XSUR t/ 30" 30XSUR XSUR 30XSUR

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 46 Unit 11 initial conditions:

  • Reactor power = = 100%
  • Unit 1 I TDEFWP unavailable Current conditions:
  • Both Main FDW pumps trip
  • 1BI B MDEFWP fails to start Based on the above conditions, which ONE of the following describes actions directed by the EOP to remove core decay heat?

Initiate...

Initiate ...

A. Rule 3 (Loss of Main or Emergency Feedwater) and cross connect with an alternate unit to supply the 1B 1 B Steam Generator B. Rule 3 (Loss of Main or Emergency Feedwater) to decrease SG pressure and feed with Condensate Booster pumps C. Rule 4 (Initiation of HPI Forced Cooling) if RCS pressure reaches 2300 psig D. EOP Encl. End. 5.9 (Extended EFDW Operation) and feed both SG's SGs with 1A MDEFWP

2010A NRC 2010A REACTOR OPERATOR EXAM NRC REACTOR I1 POINT Question 47 Which ONE of the following describes actions required that will extend the life of the Control Batteries following aa loss of all AC power in accordance with FOP EOP Enclosure 5.38 (Restoration of Power)?

Load Shed Shed the inverter.

A.Kl A. KI B.DIA B. DIA C. KSF-1 D. KOAC

2010A NRC 2010A NRC REACTOR OPERATOR EXAM REACTOR OPERATOR EXAM I1 POINT POINT Question 48 Question 48 Which ONE Which ONE ofof the describes the the following describes the normal alignment of normal alignment the Power of the Power Battery Battery busses AND a condition in which SLC busses AND a condition in which SLC 16.8.316.8.3 (Power (Power Battery Battery Parameters)

Parameters) would require would require changing that changing that alignment?

alignment?

Oconee units are normally The Oconee normally ____ and and this would be changed ifif _ _ __

be changed cross-tied I/ aa single power battery A. cross-tied becomes inoperable battery becomes B. cross-tied I/ two or more batteries simultaneously become inoperable more power batteries inoperable C. separated I/ aa single power battery becomes inoperable separated I/ two or more power batteries simultaneously become inoperable D. separated

NRC REACTOR OPERATOR 2010A NRC 2010A OPERATOR EXAM EXAM I1 POINT POINT Question 49 Question Operators are preparing to synchronize KHU-2 to the grid in accordance with OP/O/A/1106/019, OP/OIAI1 Hydro At Oconee) 106/019, (Keowee Hydro The notes the following indications:

The operator notes indications:

  • Grid Frequency == 59.9 59.9 cycles
  • Keowee Keowee Frequency = 60.3 cycles

=

  • Keowee 2 Line =

Line Volts = 13.7 13.7 kV

  • Keowee 22 Output Volts == 15.2 15.2 kV Based onon the above conditions, which ONE of of the following describes the control that will be used to adjust the synchroscope indication and after ACB-2 is closed, generator output should be adjusted to  ?

The used to adjust the synchroscope indication AND generator output will be used should be adjusted to MWs.

A. UNIT 2 AUTO VOLTAGE ADJUSTER I 0 UNIT2AUTOVOLTAGEADJUSTER B. UNIT 2 SPEED CHANGER MOTOR I 0 C. UNIT 2 AUTO VOLTAGE ADJUSTER /10 UNIT2AUTO I 10 D. UNIT 2 SPEED CHANGER MOTOR I 10

2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 50 Unit 1 1 conditions:

Time = 1159:40 1159:40

  • Reactor power == 100% stable
  • KHU-1 OOS KHU-100S
  • ACB-4 closed
  • KHU-2 gets Emergency Start signal from another unit Time == 1200:00
  • KHU-2 speed reaches 190 RPM Time = 1200:30

= 1200:30

  • KHKHU-2 U-2 speed = 190 RPM Based on the above conditions, which ONE of the following describes the status of reciuired by Unit 11 (if any) as a result of that status?

KHU-2 and the procedural actions required A. Emergency locked out / Enter LCO 3.0.3 immediately B. Emergency locked out /I Energize BOTH Standby Buses within 1 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> C. Energizing CT-4 I/ No additional actions required D. Energizing CT-4 / Energize EITHER Standby Bus within 1 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br />

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 51 Unit 1 1 initial conditions:

Time=1200

  • Time = 1200
  • Reactor power = = 35%

IA = 2.1 gpd stable

  • RCS activity = pCi/mi DEI

= 0.25 IJCi/ml DEl increasing Current conditions:

  • Time Time=1400

= 1400

  • NO change in 1A SG tube leak rate
  • RCS activity = = 0.65 IJCi/ml DEl and increasing pCi/mI DEI Based on the above conditions, which ONE of the following describes the response of the radiation monitors between 1200 and 1400?

A. 1IRIA-16 RIA-16 (Main Steam Line Monitor) and 1 1R1A-40 RIA-40 (CSAE Off-gas) increased.

B. 1RIA-16 IRIA-40 (CSAE Off-gas)

IRIA-16 (Main Steam Line Monitor) increased while 1RIA-40 remained constant.

C. 1 RIA-59 (N-16 monitor) and 1 IRIA-59 IRIA-40 RIA-40 (CSAE Off-gas) increased.

D. 11RIA-59 RIA-59 (N-16 monitor) increased while1whilelRlA-40 RIA-40 (CSAE Off-gas) remained constant.

2010A 2010A NRCNRC REACTOR OPERATOR EXAM EXAM I1 POINT POINT Question 52 Unit 1 initial conditions:

I initial

  • Time=1200 Time = 1200 power = 100%
  • Reactor power= 100%
  • A andand B B LPSW Pumps operating operating
  • C C LPSW pump in in AUTO Blackout Occurs
  • Blackout Current conditions:
  • Time=1230 Time = 1230
  • Both MFBsMFB's re-energized Based on the above conditions, which ONE of the following describes the status of the C LPSW pump 5 seconds after the MFBs MFB's have re-energized AND the system that will require the use of OP/1 IA/11 04/01 0 (Low Pressure Service Water) to return it to service OP/i /A/1104/0i0 once LPSW pressure has been restored?

A. operating 1 I Reactor Building Aux Coolers B. operating 1 I RBCU's RBCUs C. NOT operating 1 C. / Reactor Building Aux Coolers D. NOT operating 1 RBCUs I RBCU's

NRC REACTOR OPERATOR 2010A NRC 2010A OPERATOR EXAM I1 POINT Question 53 Initial plant conditions:

  • Large IA IA leak occurs
  • pressure == 87 psig decreasing Service air header pressure
  • Building air header pressure per gage below Turbine Building TlJRS TURB BLDG 160 160 ==

140 140 ==

120 120 ==

100 100 -

- ~==

80 80 -

60 60 -

40 40 20 20 PSI PSI o0 Based on the above conditions, which ONE of the following describes the air compressors that will be operating?

The Primary IA Compressor AND ...

AND...

A. Diesel Air Compressors ONLY B. Diesel Air Compressors AND AlA Compressors ONLY C. AlA Compressors AND Backup IA Compressors ONLY D. Backup IA Compressors ONLY

2010A NRC REACTOR OPERATOR EXAM 1I POINT Question 54 Unit 2 initial conditions:

  • Reactor power = = 100%
  • 2HP-5 failed closed Current conditions:
  • Operator dispatched to manually open 2HP-5
  • Pressurizer level 245 inches slowly increasing Based on the above conditions, which ONE of the following describes actions required in accordance with AP/32 (Loss of Letdown) AND the MINIMUM Pressurizer level (inches) at which a manual reactor trip would be required?

A. Maintain constant communication with operator dispatched to open 2HP-5 400 B. Maintain constant communication with operator dispatched to open 2HP-5 380 C. Initiate unit shutdown at =20%/min 20%/min per AP/29 (Rapid Unit Shutdown) 400 20%/min per AP/29 (Rapid Unit Shutdown)

D. Initiate unit shutdown at =20%/min 380

NRC REACTOR OPERATOR EXAM 2010A NRC 2010A I1 POINT POINT Question 55 Unit 33 initial Unit initial conditions:

  • 3CC-8 has has been manually opened due loss of air to the valve due to loss Current conditions:
  • Instrument air has been restored to 3CC-8 3CC-8 remains manually open
  • 3CC-8 Based on the above conditions, which ONE of the following describes whether 3CC-8 3CC-8's response to an ES 1-6 can be operated from the control room and 3CC-8s 1-6 actuation?

3CC-8 _ _be operated from the control room and 3CC-8 ___ automatically close.

A. can I/ will B. can I/ will NOT C. can NOT I/ will D. can NOT I/ will NOT

2010A NRC 2010A OPERATOR EXAM NRC REACTOR OPERATOR EXAM I1 POINT Question 56 Unit 1 Unit I initial conditions:

  • 100%

100% power

  • 450 EFPD Based on the above conditions, which ONE of the following events is the cause of the indications on the attached PIT display?

ASSUME NO OPERATOR ACTIONS A. SBLOCA B. LBLOCA C. MSLB D. Loss of MFDW LossofMFDW

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 57 Which ONE of the following is the power supply for the Unit 11 Group B Pressurizer heaters?

IXH A. 1XH B. 1XI C. 1XS1 1XSI D. 1XSF

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 58 Which ONE of the following describes who determines that a RB Continuous Release is allowed and after it is started what are the requirements for sampling the RB 0P111021014 (RB Purge System)?

atmosphere in accordance with OP/1102/014 A. CRSRO I/ Release may continue indefinitely after initial 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> without submitting daily sample requests.

B. CRSRO /I Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.

C. Shift RP I/ Release may continue indefinitely after initial 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> without submitting daily sample requests.

D. Shift RP /I Release may continue indefinitely provided RP assigns a new GWR number and sample results are entered in the Unit Log every 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 59 Plant conditions:

  • Spent Fuel Storage Cask has been dropped in Unit 1 1&2

&2 SFP

  • Spent Fuel damage is visible
  • RIA-6 and RIA-41 HIGH alarm actuates
  • Spent Fuel Pool level = -3.5 feet decreasing Based on the above conditions, which ONE of the following describes which filters will be used to reduce off site releases and the status of the SF Pumps?

Unit Reactor Building Purge filters and the Spent Fuel Cooling pumps will be A.1 A. 1 /ION ON 1 I/ OFF B. 1 C.

C.22 ION

/ ON D. 2 I/ OFF

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 60 Unit 2 initial conditions:

  • Reactor power = 100%

Current conditions:

  • Controlling 2A Steam Generator Outlet Pressure fails HIGH Based on the above conditions, which ONE of the following describes the 2A AND 2B (TBVs) response?

Turbine Bypass Valves (TBV's)

The 2A TBV's TBVs will fully open _ _ AND the 2B TBV's TBVs will fully open _ _

A. then return to throttled position / then return to throttled position B. then return to throttled position / and remain fully open C. and remain fully open / then return to throttled position D. and remain fully open I/ and remain fully open

2010A NRC REACTOR OPERATOR EXAM 1 POINT 1

Question 61 Unit 3 initial conditions:

  • power== 100%

Reactor power 100%

  • SSRHs) are open and in AUTO 3MS-77, 78, 80, 81 (MS to SSRH's)

Current conditions:

  • Reactor trips Based on the above conditions, which ONE of the following describes the plant response?

A. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 close 3MS-1 12 & 3MS-173 close AND 3MS-77, 78,80, B. 3MS-112 78, 80, and 81 remain open 3MS-1 12 & 3MS-173 remains open AND 3MS-77, 78, 80, and 81 close C. 3MS-112 D. 3MS-112, 3MS-173, 3MS-77, 3MS-78, 3MS-80, and 3MS-81 remain open

2010A OPERATOR EXAM 2010A NRC REACTOR OPERATOR EXAM 1I POINT POINT Question 62 Unit 11 plant conditions:

  • OP/1/A OP/i/A 1106/002A i 106/002A (Condensate And FDW System Startup And Shutdown) Encl. End.

42 (Condensate And FDW System Startup) in progress 4.2

  • 1iA A Hotwell pump (HWP) operating
  • CBP suction pressure = 45 psig slowly decreasing
  • The 3 square amber lights located above the HWP HWP PUMP PUMP AMP gages are "ON" ON Procedure directs placing a standby Hotwell
  • Procedure Hotwell pump to "AUTO" AUTO Based on the above conditions, which ONE of the following describes what the Hotwell pump amber lights indicate AND the 1lB B Hotwell pump response once the control switch is placed in AUTO?

1iAA Hotwell pump is operating with _ _ and the 1lB B Hotwell pump _ _ automatically start when its control switch is placed in Auto.

A. low suction pressure /I will B. low discharge pressure /I will C. low suction pressure /I will NOT D. low discharge pressure /I will NOT qB' ~

c.J . . . .. . .. , ",

. 1

.\ \t

.. . . .... .. . .

.-

4 Pk;MP AMPS HNP PUMP HVVP 1A 18 IC lC

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 63 Unit 3 plant conditions:

  • Reactor power = 100%

= 100%

  • Fuel movement in progress in SFP
  • 3RIA-6 (Spent Fuel Pool) in HIGH alarm Based on the above conditions, which ONE of the following describes action(s) that will occur?

A. 3RIA-6 audible alarm will automatically sound.

B. the Spent Fuel Pool Ventilation system will be automatically isolated.

C. the Spent Fuel Filtered Exhaust fans will be manually started from the Control Room.

D. the Outside Air Booster Fans will be manually started from the Spent Fuel Pool entrance area.

2010A NRC 2010A NRC REACTOR OPERATOR OPERATOR EXAM EXAM I1 POINT POINT Question 64 IAPressurevs.Time IA Pressure vs. Time 100~-----------------------------------------'

100 w

uJ 90 .... .. ... . . . . . .. .... .. ... .. :... ... .... ... ... .. . .. . ... .. : ..... ... .. .. .. . . .. . . ... . .. . .

0:::

J D

(f)

C))

(f)

C?)

W LU 0:::

0..

U

<t: 80 . .. .. . . . . .. . .. ... ... . . .. .. . .... .... .. ... ..... .. ..........

~

.

. .. .. ... . .. ... ... .. ...... .

70~----~~-----4-------+------~------------~

1200 1210 1220 1230 ii rvl E TIME Based on the graph above, which ONE of the following describes the time at which SA- SA 141 (SA to IA Controller) will automatically open?

A. 1207 B. 1210 C. 1212 D. 1215

2010A NRC 2010A NRC REACTOR REACTOROPERATOR OPERATOR EXAM EXAM POINT 1I POINT Question 65 Question 65 Unit 33 initial Unit initial conditions:

conditions:

  • Reactor power
  • Reactor power == 100%

100%

  • Fire in progress
  • Fire in progress in area in area of of 3TE 3TE switchgear switchgear Current conditions:

Current conditions:

    • 3TE 3TE busbus isis grounded grounded duedue to to water water spray spray
  • Relay
  • Relay 51 51G actuated G actuated Based on Based on the the above above conditions, conditions, which which ONE ONE ofof the the following following lists lists ONLY ONLY components components that that remain available?

remain available?

A. 3A A. 3A MDEFDWP, MDEFDWP, 3B 3B MDEFDWP MDEFDWP B. 3A B. 3A MDEFDWP, MDEFDWP, 3C HPIP 3C HPIP C. 3C C. LPIP, 3B 3C LPIP, 3B MDEFDWP MDEFDWP D. 3C LPIP, 3C HPIP D. HPIP

2010A NRC REACTOR OPERATOR 2010A NRC OPERATOR EXAM EXAM I1 POINT POINT Question 66 Unit 22 plant conditions:

  • Reactor in MODE 66
  • RCS Boron == 2270 ppmb Based on the above conditions, which ONE of the following describes whether RCS Based meets the requirements of OP/2/AI1 Boron concentration meets 502/007 (Operations OP/2/A/1502/007 (Operations number of OPERABLE Responsibilities) AND what is the minimum number Defueling/Refueling Responsibilities)

Source Range NIsNl's required by the same procedure?

A. meets I/ 22 B. meets /I 1 1 C. does NOT meet /I 22 D. does NOT meet I/ 1 I

2010A NRC REACTOR OPERATOR EXAM EXAM 1I POINT Question 67 Unit 1I initial conditions:

  • Reactor power = 100%

LDST level =

  • LOST 75 stable

= 75"

  • Group 7 rod position = = 94% withdrawn
  • Makeup to LOST LDST initiated from 1lB B BHUT
    • Neutron error = = 0 stable Current conditions:

HP-i 5 Bailey controller indicates 470 gallons added to LOST

  • 11 HP-15 LDST
  • 11 B Bleed Transfer Pump secured Based on the above conditions, which ONE of the following would describe a diverse indication that 470 gallons of 1I B BHUT had been added to the LOST?

LDST?

LDST level is approximately ____ inches and neutron error will become _ _ __

LOST A. 90 I positive B. 90 I negative C. 95 I positive D. 95 I negative O.

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 68 Which ONE of the following states the RCS Pressure Safety Limit (psig) AND which of the listed items is credited with ensuring the limit is NOT exceeded?

A. 2500 I/ RPS trip settings B. 2500 I/ PORV C. 2750 I/ RPS trip settings.

D. 2750 I/ PORV

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 69 1 plant conditions:

Unit 1

  • Reactor power = 100%

= 100%

  • 1AIA Core Flood Tank parameters:

o Pressure = = 572 psig stable o Level = = 12. 91 feet o Boron Concentration = = 2010 ppmb

  • 1 I B Core Flood Tank parameters:

o Pressure = 590 psig stable o Level = 12.51 12.51 feet o Boron Concentration = = 1895 ppmb Based on the above condition, which ONE of the following describes the action(s) required (if any) in accordance with Tech Spec 3.5.1 (Core Flood Tanks)?

A. NO actions required B. Enter LCO 3.0.3 immediately C. Restore 1 1A A CFT to OPERABLE within 11 hour1.273148e-4 days <br />0.00306 hours <br />1.818783e-5 weeks <br />4.1855e-6 months <br /> ONLY D. Restore 1 IB B CFT to OPERABLE within 1 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> ONLY

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 70 Unit 1 I plant conditions:

  • Reactor power = = 100%

Based on the above condition, which ONE of the following describes a condition that would require entry into a Tech Spec ACTIONS table?

A. UST level ==5.6 5.6 feet B. BWST level == 47.3 feet C. 1 I D RPS channel in Manual bypass D. 230KV Dacus Black and White lines isolated

2010A NRC REACTOR OPERATOR EXAM 1

I POINT Question 71 Unit 1 1 plant conditions:

  • Reactor in MODE 5 ReactorinMODE5
  • Reactor Building Main Purge in operation Based on the above conditions, which ONE of the following will cause the RB Purge fan to trip?

A. Inadvertent actuation of ES Channel 5 B. 1 I RIA-45 reaches ALERT setpoint C. Suction piping pressure = = 5 inches of water vacuum D. 1I PR-3 (RB PURGE CONTROL) closed

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 72 Unit 11 plant conditions:

  • Reactor in MODE 6 IA LPI pump
  • Fuel movement in progress
  • NI-3 and 4 SR out of service
  • RB Purge in progress Based on the above conditions, which ONE of the following describes when Reactor Building evacuation is required?

A. 1I NI-2 Nl-2 SR fails low B. 1IRIA-4 RIA-4 HIGH alarm C. 1IRIA-45 RIA-45 HIGH alarm D. 11 NI-2 Nl-2 WR fails high

2010A NRC 2010A OPERATOR EXAM NRC REACTOR OPERATOR EXAM I1 POINT POINT Question 73 ONE of the following describes the required response For Operations personnel, which ONE to an Electronic Electronic Dosimeter dose alarm and when it isis acceptable to deviate from that requirement?

immediately and A. Exit the area immediately RP /I with RP permission and contact RP immediately and contact RP /I with emergency dose limits in effect B. Exit the area immediately B.

C. Move away from the area until alarm clears I/ with RP permission D. Move away from the area until alarm clears /I with emergency dose limits in effect

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 74 1 plant conditions:

Unit 1

  • Blackout tab in progress Initiate AP/1
  • EOP step gives direction to "Initiate AP/11I (Recovery From Loss of Power)"

Power)

Based on the above conditions, which ONE of the following describes the actions required to perform the EOP step?

A. RO will perform AP/11 AP/1 I and SRO will wait until AP/11 AP/1 1 has been completed to continue in the EOP.

B. SRO will direct steps in AP/l AP/111 and then return to the EOP once AP/1 AP/11I is complete.

AP/1 I actions. SRO will continue in the EOP. SRO can re-direct RO C. RO will begin AP/11 actions.

D. RO will begin AP/1 AP/11I actions. SRO will continue in the EOP. RO must remain in AP/1 1 until the procedure is complete.

AP/11

2010A NRC REACTOR OPERATOR EXAM I POINT 1

Question 75 1 plant conditions:

Unit 1

  • Reactor power = = 100%

1SA3IB6 (FIRE ALARM) actuated

  • 1SA3/B6
  • Fire Alarm panel indication o point 0202071 (Unit 1 I pipe trench room 348 north end) actuated Based on the above conditions, which ONE of the following describes who will be dispatched to the Unit 11 pipe trench room 348 per the Alarm Response Guide to determine the validity of the alarm AND a method used in RP/10001029 RP/1000/029 (Fire Brigade Response) to dispatch the fire brigade when it is required?

A. A Fire Brigade qualified operator 1 I Plant Paging system B. A Fire Brigade qualified operator 1 I Have Security dispatch fire brigade C. The Unit 11 BOP Reactor Operator 1 I Plant Paging system D. The Unit 1I BOP Reactor Operator 1 I Have Security dispatch fire brigade

Oconee Ocone e 2010-301 2010*301 Exam Exam Refere nces References RO Exam:

Steam Tables Unit 1 Unit 1 Loop A Narrow Range Plot Range PT Plot SRO Exam:

RP/O/8/10001001 RP/O/B/1000 /OO1 (Emergency Classification))

(Emergency Classification Technical Specification (TIS) (Pressurizer)

(T/S) 3.4.9 (Pressurizer)

TIS T/S 3.8.8 (Distribution System Systemss -

Operating)

Response Guide 11SA-03 Alarm Response B-6 pages 2-28.

SA-03 8-6

Exam Question # 56 UNIT 1 LOOP A NARROW RANGE PT PLOT 1

JcLj

-

Main Alarms Graphics Trends F List Zoom Print Help 1QOCT-2003 09 [1 *ls

[1 FT tIN Ei 01 TURN ON 0L[ F TLMJk -$PT NI IIOIAIEr I.

[

119% IFOkI 10 LOOP A - IF_I

[

- - ii 1 t

._

25O0 A

__--

2500-

- F - -Il ID II 11:11 I 2400

.5 I R E1 L[VEL

.5 2300-- 7 / )

.

5 1 INCH E .7

/ EC EINCH

.*

.* .

S v *. IIITL [Fl

U .JOO p I II

..ooo E $ I 5 ,.

1900 0.2 I i6

//

p 00-

- I I I- I I I

Ill I INCII I __

7 / 7 ./ 7 rH INCH 1 1. 0 S 7 /

  • v /

--

C H / 7 / P LLrI IE.LF I 1 4 1 INCH I -iso I 0 WI I I I I I I I I 0U 55 650 00 51 DEGF TH [HELJ S5 DEGF I J 5 [EOF U 14IIFI NR r

4 E TEMPEIA I URE DEGI LR CORE CUll. ET TEMF 950 DEGJ S t T TEMP 448 DEGF -.

I I II it, I UI II lilt IL I Ft 1 F I t TUE E I It I F OT 9 DFtI TH I NI I LI I T I oN ro lIE C\N( Fl 111 [. - [I r

J 1=

TTO1O WK= AN0NYIUS SEC LVL= 15 PR Ocoriee Sim C I

OConee ZO~O -301 C

rn 1

>w>>o Q# KEY 1 B 2 0 3 A 4 0 5

(3) A 6

0) 0 7 B 8

CO B 9

(0 A B

0 0 03 C 0) 0 Cl > 0 Cl Cl Cl > 03 0 > 03 10

..I 11 - A 12 C 13 B 14 A 15(31 0 16CO 0 17-1 0 18CO C 19(0 A 200 0 21 - C 22 B 23L.3 0 24 B 25(31 C 26CO C 27-4 0 28CO 0 C) 0) C D> > 0) > > C) 0 0 29D C 30C C 31 C 32r A 33C.5 A 34 .. B 35 A 36CO A 37-4 0 38CO 0 39 B 40 C 41 0 C) 0 0 42 C 43 C 44 C 45 0 46CO 0 A

C) > 03 0) 0>

47-.1 48CO C 49 B 50 B 51 A 52 C 53 0 54 B 0)

~ joi 0

OConee 2010-301 c\J 0 0

Q# KEY (51 0) C 56 UI 57 0 (Ii 58 C) C 01 59 C) 0 0) 60 0 C C) 61 -

A C) 62 1%) B C) 63

(.3 A C) .

0 64 C) 65 Ui B C) 66

0) A C) 67

-1 B C) 68 C) C C) 69 C) B 4

70 0 A

-1 71 0

-4 72t) B 4

73W B

4 74 C 75UI A