ML13039A306: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 26: | Line 26: | ||
the designated State Official. | the designated State Official. | ||
Summary of Commitments This letter revises commitment number 2 lis ted in Enclosure 7 of the original LAR. The revised commitment reads as follows: | Summary of Commitments This letter revises commitment number 2 lis ted in Enclosure 7 of the original LAR. The revised commitment reads as follows: | ||
: 2. In conjunction with implementation of the proposed TS, procedures will be revised to require an assessment of a fuel assembly's exposure to rodded power operation in | : 2. In conjunction with implementation of the proposed TS, procedures will be revised to require an assessment of a fuel assembly's exposure to rodded power operation in | ||
Line 32: | Line 32: | ||
In a letter to the U.S. Nuclear Regulatory Commission (NRC) dated August 19, 2011 (Agencywide Documents Access and Managem ent System (ADAMS) Accession No. ML11236A133), the Northern States Power Co mpany, a Minnesota corporation doing business as Xcel Energy (hereafter "NSPM"), requested an amendment to the Technical Specifications (TS) regarding Spent Fuel Pool (SFP) criticality for the Prairie Island Nuclear Generating Plant (PINGP). | In a letter to the U.S. Nuclear Regulatory Commission (NRC) dated August 19, 2011 (Agencywide Documents Access and Managem ent System (ADAMS) Accession No. ML11236A133), the Northern States Power Co mpany, a Minnesota corporation doing business as Xcel Energy (hereafter "NSPM"), requested an amendment to the Technical Specifications (TS) regarding Spent Fuel Pool (SFP) criticality for the Prairie Island Nuclear Generating Plant (PINGP). | ||
To complete their review, the NRC staff requested additional information by letter dated January 22, 2013 (ADAMS Accession No. ML13011A316). | To complete their review, the NRC staff requested additional information by letter dated January 22, 2013 (ADAMS Accession No. ML13011A316). | ||
For clarity, the NRC RAI information is provided below in itali cs font and the NSPM response is provided in plain font. | For clarity, the NRC RAI information is provided below in itali cs font and the NSPM response is provided in plain font. | ||
(1) Regarding the sensitivity analysis provided in response to RAI-SRXB-1 in the May 16, 2012, submittal, please confirm whether the un-poisoned cases assumed a uniform U-235 enrichment loading across all pins at the U-235 enrichments analyzed. Response: All un-poisoned cases used in the sensitivity analysis provided in response to RAI-SRXB-1 assumed a uniform U-235 enrichment loading across all | |||
pins at the values of enrichment presented in the May 16, 2012 submittal. | pins at the values of enrichment presented in the May 16, 2012 submittal. | ||
(2) Confirm that the actual fuel assemblies at PINGP contain lower enrichments in Gd-bearing pins. | |||
Response: In every cycle of operation exce pt Unit 1 Cycle 5, the U-235 enrichment of the gadolinia bearing pins is lower than the pins without gadolinia. | Response: In every cycle of operation exce pt Unit 1 Cycle 5, the U-235 enrichment of the gadolinia bearing pins is lower than the pins without gadolinia. | ||
In Unit 1 Cycle 5, the gadolinia bearing pins were of the same enrichment as the pins without gadolinia. This was the first cycle of operation usi ng gadolinia and the gadolinia enrichment was only 1 weight percen | In Unit 1 Cycle 5, the gadolinia bearing pins were of the same enrichment as the pins without gadolinia. This was the first cycle of operation usi ng gadolinia and the gadolinia enrichment was only 1 weight percen | ||
: t. Note that even in Unit 1 Cycle 5, the gadolinia bearing pins contain fewe r grams of U-235 than the pins without gadolinia because the gadolinia displaces uranium in the fuel matrix. | : t. Note that even in Unit 1 Cycle 5, the gadolinia bearing pins contain fewe r grams of U-235 than the pins without gadolinia because the gadolinia displaces uranium in the fuel matrix. | ||
(3) It is not clear from Section 3.3.3.1 of WCAP-17400-P, enclosed in the August 19, 2011, application, if the database used to determine the axial burnup profile considered extended power uprate (EPU) cycle designs. Please confirm whether operation in an EPU cycle has been considered in determining the limiting axial | |||
shape. Response: NSPM confirms that EPU fuel management cycles were reviewed and considered in selecting the limiting axial burnup profiles. | shape. Response: NSPM confirms that EPU fuel management cycles were reviewed and considered in selecting the limiting axial burnup profiles. | ||
Line 46: | Line 46: | ||
Notwithstanding the above, as discussed in a telephone conference on December 19, 2012, NSPM has decided to withdraw consideration of the EPU fuel management cycles from the proposed criticality safety analysis. NSPM has chosen to not submit a license amendment request to increase its licensed thermal power limit in conjunction with an EPU. | Notwithstanding the above, as discussed in a telephone conference on December 19, 2012, NSPM has decided to withdraw consideration of the EPU fuel management cycles from the proposed criticality safety analysis. NSPM has chosen to not submit a license amendment request to increase its licensed thermal power limit in conjunction with an EPU. | ||
Therefore, NSPM requests that NRC withdraw consideration of the EPU axial burnup profiles from the proposed criticality safety analysis. | Therefore, NSPM requests that NRC withdraw consideration of the EPU axial burnup profiles from the proposed criticality safety analysis. | ||
(4) The licensee's criticality analysis prov ides some assurance that the proposed design basis analysis bounds previous rodd ed operation of up to 1 gigawatt day per metric ton uranium (GWD/MTU) of depl etion. However, since future rodded operation could initiate at or near the other depletion parameters in the proposed design basis analysis, the analysis does not bound future operation. Therefore, the NRC staff requests that the licensee either: (a) Provide an analysis for rodded operation that initiates from the other depletion parameters used in the proposed design basis analysis, or (b) Propose an alternate method of controlling fuel assemblies that have experienced rodded operation. | |||
Response: For all assemblies discharged into the spent fuel pool after approval of this license amendment request, NSPM proposes the following alternate method of controlling fuel assemblies that have experienced full-power rodded operation: | Response: For all assemblies discharged into the spent fuel pool after approval of this license amendment request, NSPM proposes the following alternate method of controlling fuel assemblies that have experienced full-power rodded operation: | ||
Any fuel assembly that experiences more than 100 MWD/MTU of core average full-power rodded operation exposure in the cycle immediately prior to discharge to the spent fuel pool will not be permitted to credit any full-power rodded exposure experienced during that cycle (i.e., that burnup will | Any fuel assembly that experiences more than 100 MWD/MTU of core average full-power rodded operation exposure in the cycle immediately prior to discharge to the spent fuel pool will not be permitted to credit any full-power rodded exposure experienced during that cycle (i.e., that burnup will |
Revision as of 23:28, 28 April 2019
ML13039A306 | |
Person / Time | |
---|---|
Site: | Prairie Island ![]() |
Issue date: | 02/08/2013 |
From: | Lynch J E Northern States Power Co, Xcel Energy |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
L-PI-13-002, TAC ME6984, TAC ME6985 | |
Download: ML13039A306 (5) | |
Text
1717 Wakonade Drive East Welch, Minnesota 55089-9642 Telephone: 651.388.1121 February 8, 2013 L-PI-13-002 10 CFR 50.90 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 Prairie Island Nuclear Generating Plant, Units 1 and 2 Dockets 50-282 and 50-306 Renewed License Nos. DPR-42 and DPR-60 Response to Request for Additional Informati on (RAI) Associated with Spent Fuel Pool Criticality Changes (TAC Nos. ME6984 and ME6985
) In a letter to the U.S. Nuclear Regulatory Commission (NRC) dated August 19, 2011 (Agencywide Documents Access and Managem ent System (ADAMS) Accession No. ML11236A133), the Northern States Power Co mpany, a Minnesota corporation doing business as Xcel Energy (hereafter "NSPM"), requested an amendment to the Technical Specifications (TS) regarding Spent Fuel Pool (SFP) criticality for the Prairie Island Nuclear Generating Plant (PINGP).
To complete their review, the NRC staff requested additional information by letter dated January 22, 2013 (ADAMS Accession No. ML13011A316). Enclosure 1 to this letter provides the NSPM response to the January 22, 2013 request for additio nal information.
NSPM submits this supplement in accordance with the provisions of 10 CFR 50.90.
The supplemental information provided in this letter does not impact the conclusions of the Determination of No Significant Hazards Consideration and Environmental Assessment presented in the August 19, 2011 submittal.
In accordance with 10 CFR 50.91, NSPM is notifying the State of Minnesota of this License Amendment Request (LAR) supplement by transmitting a copy of this letter to
the designated State Official.
Summary of Commitments This letter revises commitment number 2 lis ted in Enclosure 7 of the original LAR. The revised commitment reads as follows:
- 2. In conjunction with implementation of the proposed TS, procedures will be revised to require an assessment of a fuel assembly's exposure to rodded power operation in
L-PI-13-002 Page 1 of 3 ENCLOSURE 1 Spent Fuel Pool Criticality Analysis Response to Requests for Addition Information (RAI)
In a letter to the U.S. Nuclear Regulatory Commission (NRC) dated August 19, 2011 (Agencywide Documents Access and Managem ent System (ADAMS) Accession No. ML11236A133), the Northern States Power Co mpany, a Minnesota corporation doing business as Xcel Energy (hereafter "NSPM"), requested an amendment to the Technical Specifications (TS) regarding Spent Fuel Pool (SFP) criticality for the Prairie Island Nuclear Generating Plant (PINGP).
To complete their review, the NRC staff requested additional information by letter dated January 22, 2013 (ADAMS Accession No. ML13011A316).
For clarity, the NRC RAI information is provided below in itali cs font and the NSPM response is provided in plain font.
(1) Regarding the sensitivity analysis provided in response to RAI-SRXB-1 in the May 16, 2012, submittal, please confirm whether the un-poisoned cases assumed a uniform U-235 enrichment loading across all pins at the U-235 enrichments analyzed. Response: All un-poisoned cases used in the sensitivity analysis provided in response to RAI-SRXB-1 assumed a uniform U-235 enrichment loading across all
pins at the values of enrichment presented in the May 16, 2012 submittal.
(2) Confirm that the actual fuel assemblies at PINGP contain lower enrichments in Gd-bearing pins.
Response: In every cycle of operation exce pt Unit 1 Cycle 5, the U-235 enrichment of the gadolinia bearing pins is lower than the pins without gadolinia.
In Unit 1 Cycle 5, the gadolinia bearing pins were of the same enrichment as the pins without gadolinia. This was the first cycle of operation usi ng gadolinia and the gadolinia enrichment was only 1 weight percen
- t. Note that even in Unit 1 Cycle 5, the gadolinia bearing pins contain fewe r grams of U-235 than the pins without gadolinia because the gadolinia displaces uranium in the fuel matrix.
(3) It is not clear from Section 3.3.3.1 of WCAP-17400-P, enclosed in the August 19, 2011, application, if the database used to determine the axial burnup profile considered extended power uprate (EPU) cycle designs. Please confirm whether operation in an EPU cycle has been considered in determining the limiting axial
shape. Response: NSPM confirms that EPU fuel management cycles were reviewed and considered in selecting the limiting axial burnup profiles.
A thorough review of the L-PI-13-002 Page 2 of 3 uprate fuel management calculations was performed including the axial burnup profiles associated with the uprate fuel management studies and it was concluded that the uprate fuel axial burnup profiles do not need to be explicitly included in the criticality safety analysis.
Notwithstanding the above, as discussed in a telephone conference on December 19, 2012, NSPM has decided to withdraw consideration of the EPU fuel management cycles from the proposed criticality safety analysis. NSPM has chosen to not submit a license amendment request to increase its licensed thermal power limit in conjunction with an EPU.
Therefore, NSPM requests that NRC withdraw consideration of the EPU axial burnup profiles from the proposed criticality safety analysis.
(4) The licensee's criticality analysis prov ides some assurance that the proposed design basis analysis bounds previous rodd ed operation of up to 1 gigawatt day per metric ton uranium (GWD/MTU) of depl etion. However, since future rodded operation could initiate at or near the other depletion parameters in the proposed design basis analysis, the analysis does not bound future operation. Therefore, the NRC staff requests that the licensee either: (a) Provide an analysis for rodded operation that initiates from the other depletion parameters used in the proposed design basis analysis, or (b) Propose an alternate method of controlling fuel assemblies that have experienced rodded operation.
Response: For all assemblies discharged into the spent fuel pool after approval of this license amendment request, NSPM proposes the following alternate method of controlling fuel assemblies that have experienced full-power rodded operation:
Any fuel assembly that experiences more than 100 MWD/MTU of core average full-power rodded operation exposure in the cycle immediately prior to discharge to the spent fuel pool will not be permitted to credit any full-power rodded exposure experienced during that cycle (i.e., that burnup will
not be credited when determining the c oefficients used to categorize fuel assemblies as described in WCAP-17400-P).
This threshold is applied only to the cycl e immediately prior to discharge. Any rodded operation experienced in a previous cycle of operation will not be applied because subsequent operation in an unrodded condition wil l mitigate the impacts of rodded operation (i.e., axial burnup profiles tend to return to that of an equivalently burned unrodded assembly as well as the reactivity changes due to fission products as a result of spectral hardening while rodded).
To address this alternate method of controlling fuel assemblies that have
experienced rodded operation, NSPM has modified Commitment 2 as follows:
L-PI-13-002 Page 3 of 3 2. In conjunction with implementation of the proposed TS, procedures will be revised to require an assessment of a fuel assembly's exposure to rodded power operation in the core prior to movi ng that fuel assembly into the spent fuel pool (SFP) storage racks. If an assembly experiences more than 100 megawatt day per metric ton uranium (MW d/MTU) of core average full-power rodded operation exposure in the cycle imm ediately prior to discharge to the spent fuel pool, this exposure experi enced while rodded wil l not be credited for determining the coefficients used to categorize fuel assemblies as described in WCAP-17400-P. In addition, if an assembly experiences more than 1 gigawatt day per metric ton uranium (GWd/MTU) of core average
rodded operation lifetime expos ure, the assembly shall either be treated as Fuel Category 1 or evaluated to determine which Fuel Category is appropriate for safe st orage of the assembly.