ML19318A578: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 18: | Line 18: | ||
=Text= | =Text= | ||
{{#Wiki_filter:. | {{#Wiki_filter:. | ||
V 3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REOUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3.0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification. . | V 3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REOUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3.0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification. . | ||
3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Con-dition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not' required. | 3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Con-dition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not' required. | ||
Line 30: | Line 26: | ||
This specification is not applicable in Conditions 4 or 5. | This specification is not applicable in Conditions 4 or 5. | ||
80062 30390 BRUNSWICK-UNIT 1 3/4 0-1 | 80062 30390 BRUNSWICK-UNIT 1 3/4 0-1 | ||
u | u | ||
Line 44: | Line 39: | ||
: 2. Following start of facility commercial operation, inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing of ASME Code Class 1, 2, and 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Com-mission pursuant to 10 CFR 50, Section 50.55a(g) (6) (i). | : 2. Following start of facility commercial operation, inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing of ASME Code Class 1, 2, and 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Com-mission pursuant to 10 CFR 50, Section 50.55a(g) (6) (i). | ||
BRUNSWICK-UNIT 1 3/4 0-2 | BRUNSWICK-UNIT 1 3/4 0-2 | ||
APPLICABILXTY | APPLICABILXTY BASES 3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason. | ||
BASES 3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason. | |||
The provisions of this specification permit the ACTION statemente associ-ated. with individual systems, subsystems, trains, components or devices to be consistent with the ACTION statements of the associated electrical power source. It allows operation to be governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source. | The provisions of this specification permit the ACTION statemente associ-ated. with individual systems, subsystems, trains, components or devices to be consistent with the ACTION statements of the associated electrical power source. It allows operation to be governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source. | ||
For example, Specification 3.8.1.1 requires in part that all four emergency diesel generators be OPERABLE. The ACTION statement provides f or a 72-hour out-of-service time when one emergency diesel generator is not OPERABLE. | For example, Specification 3.8.1.1 requires in part that all four emergency diesel generators be OPERABLE. The ACTION statement provides f or a 72-hour out-of-service time when one emergency diesel generator is not OPERABLE. | ||
Line 56: | Line 48: | ||
As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION statement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specification 3.0.5, all sys tems, subsys tems, trains, components and devices supplied by the inoperable normal power sources, both of the off-site circuits, would also be inoperable. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continue.d operation to be consistent with the ACTION statement for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must bc OPERABLE (as must be the components supplied by the emergency power sourec) and all redundant systems, subsystems, trains, components and devices in the other division must be OPERABLE, i | As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION statement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specification 3.0.5, all sys tems, subsys tems, trains, components and devices supplied by the inoperable normal power sources, both of the off-site circuits, would also be inoperable. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continue.d operation to be consistent with the ACTION statement for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must bc OPERABLE (as must be the components supplied by the emergency power sourec) and all redundant systems, subsystems, trains, components and devices in the other division must be OPERABLE, i | ||
BRUNSWICK-UNIT 1 B 3/4 0-la | BRUNSWICK-UNIT 1 B 3/4 0-la | ||
APPLICABILITY | APPLICABILITY BASES-or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source OPERABLE) . In other words, all emergency power sources must be OPERABLE and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification. | ||
BASES-or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source OPERABLE) . In other words, all emergency power sources must be OPERABLE and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification. | |||
In Condition 4 or 5 SpeciEication 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to. | In Condition 4 or 5 SpeciEication 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to. | ||
t 6 | t 6 | ||
m BRUNSWICK-UNII 1 B 3/4 0-lb | m BRUNSWICK-UNII 1 B 3/4 0-lb | ||
3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REQUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3 . 0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification. | 3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REQUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3 . 0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification. | ||
3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Condition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not required. | 3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Condition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not required. | ||
3.0.3 In the event a Limiting Condition for Operation and/or associated ACTION requirements cannot be satisfied because of circumstances in excess of those addressed in the specification, the unit shall be placed in l l at least HOT SHUTDOWN within 6 hours and in COLD SHUTDOWN within the fol-lowing 30 hours unless corrective measures are completed that permit opera-tion under the permissible ACTION statements for the specified time interval as measured from initial discovery. Exceptions to these requirements shall | 3.0.3 In the event a Limiting Condition for Operation and/or associated ACTION requirements cannot be satisfied because of circumstances in excess of those addressed in the specification, the unit shall be placed in l l at least HOT SHUTDOWN within 6 hours and in COLD SHUTDOWN within the fol-lowing 30 hours unless corrective measures are completed that permit opera-tion under the permissible ACTION statements for the specified time interval as measured from initial discovery. Exceptions to these requirements shall be stated in the individual specifications. | ||
be stated in the individual specifications. | |||
3.0.4 Entry into an OPERATIONAL CONDITION or other specified applicability state shall not be made unless the con-itions of the Limiting Condition for Operation are met without reliance on provisions contained in the ACTION statements unless otherwise excepted. This provision shall not prevent passage thru OPERATIONAL CONDITIONS required to comply with ACTION requirements. | 3.0.4 Entry into an OPERATIONAL CONDITION or other specified applicability state shall not be made unless the con-itions of the Limiting Condition for Operation are met without reliance on provisions contained in the ACTION statements unless otherwise excepted. This provision shall not prevent passage thru OPERATIONAL CONDITIONS required to comply with ACTION requirements. | ||
3.0.5 When a system, subsystem, train, component or device is determined to be inoperable solely because its emergency power source is inoperable, or solely because its normal power source is incperable, it may be considered OPERABLE for the purpose of satisfying the requirements of its applicable Limiting Condition for Operation, provided: (1) its corresponding normal or { | 3.0.5 When a system, subsystem, train, component or device is determined to be inoperable solely because its emergency power source is inoperable, or solely because its normal power source is incperable, it may be considered OPERABLE for the purpose of satisfying the requirements of its applicable Limiting Condition for Operation, provided: (1) its corresponding normal or { | ||
Line 83: | Line 63: | ||
BRUNSWICK _ " NIT 2 3/4 0-1 | BRUNSWICK _ " NIT 2 3/4 0-1 | ||
APPLICABILITY SURVEILLANCE REOUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL CONDITIONS or other states -specified for individual Limiting Conditions for Opeiation unless otherwise stated in an individual Surveillance Requirement. | |||
APPLICABILITY | |||
SURVEILLANCE REOUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL CONDITIONS or other states -specified for individual Limiting Conditions for Opeiation unless otherwise stated in an individual Surveillance Requirement. | |||
4.0.2 Each Surveillance Requirement shall be performed within the specified time interval with: | 4.0.2 Each Surveillance Requirement shall be performed within the specified time interval with: | ||
: a. A maximum allowable extension not to exceed 25% of the surveil-lance interval, | : a. A maximum allowable extension not to exceed 25% of the surveil-lance interval, | ||
Line 101: | Line 76: | ||
l | l | ||
APPLICABILITY | APPLICABILITY BASES-3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason. | ||
BASES-3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason. | |||
The provisions of this specification permit the ACTION statements associ-ated. with individual systems, subsys tems, trains, components or devices to be censistent ,with the ACTION statements of the associated electrical power source. It allows operation to be . governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source. | The provisions of this specification permit the ACTION statements associ-ated. with individual systems, subsys tems, trains, components or devices to be censistent ,with the ACTION statements of the associated electrical power source. It allows operation to be . governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source. | ||
For example. Specification 3.8.1.1 requires in part that all four e=ergency diesel generators be OPERABLE. The ACTION statement provides for a 72-hour out-of-service time when one emergeacy diesel generator is not OPERABLE. | For example. Specification 3.8.1.1 requires in part that all four e=ergency diesel generators be OPERABLE. The ACTION statement provides for a 72-hour out-of-service time when one emergeacy diesel generator is not OPERABLE. | ||
Line 112: | Line 83: | ||
If they are not satisfied, shutdown is required in accordance with this specification. | If they are not satisfied, shutdown is required in accordance with this specification. | ||
As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION s tatement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specifica tion 3.0.5, a_i sys tems, subsys tems , trains, components and devices supplied by the inoperable normal power sources, koth of the off-site circuits, would also be inoperabic. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continued operation to be consistent with the ACTION statement 'for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must be OPERABLE (as must be the components supplied by the emergency power source) and all redundant systems, subsystems, trai:n, components and devices in the other division must be OPERABLE, BRUNSWICK-UNIT 2 B 3/4 0-la | As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION s tatement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specifica tion 3.0.5, a_i sys tems, subsys tems , trains, components and devices supplied by the inoperable normal power sources, koth of the off-site circuits, would also be inoperabic. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continued operation to be consistent with the ACTION statement 'for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must be OPERABLE (as must be the components supplied by the emergency power source) and all redundant systems, subsystems, trai:n, components and devices in the other division must be OPERABLE, BRUNSWICK-UNIT 2 B 3/4 0-la | ||
, APPLICABILITY | , APPLICABILITY BASES or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source. OPERABLE). In other words, all emergency power sources must be OPERABL ' and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification. | ||
BASES or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source. OPERABLE). In other words, all emergency power sources must be OPERABL ' and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification. | |||
In Condition 4 or 5 Speci51 cation 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to. | In Condition 4 or 5 Speci51 cation 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to. | ||
B BRUNSWICK-UNIT 2 B 3/4 0-lb | B BRUNSWICK-UNIT 2 B 3/4 0-lb | ||
.. .}} | .. .}} |
Latest revision as of 07:28, 1 February 2020
ML19318A578 | |
Person / Time | |
---|---|
Site: | Brunswick ![]() |
Issue date: | 06/18/1980 |
From: | CAROLINA POWER & LIGHT CO. |
To: | |
Shared Package | |
ML19318A577 | List: |
References | |
NUDOCS 8006230390 | |
Download: ML19318A578 (8) | |
Text
.
V 3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REOUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3.0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification. .
3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Con-dition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not' required.
3.0.3 In the event a Limiting Condition for Operation and/or associated ACTION requirements cannot be satisfied because of circumstances in excess of those addressed in the specification, the unit shall be placed in l at least HOT SHUTDOWN within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the fol-lowing 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> unless corrective measures are completed that permit opera-tion under the permissible ACTION statements for the specified time interval as measured from initial discovery. Exceptions to these requirements shall be stated in the individual specifications.
3.0.4 Entry into an OPERATIONAL CONDITION or other specified applicability state shall not be made unless the conditions of the Limiting Condition for Operation are met without reliance on provisions contained in the ACTION statements unless otherwise excepted. This provision shall not prevent passage thru OPERATIONAL CONDITIONS required to comply with ACTION requirements.
3.0.5 When a system, subsystem, train, component or device is determined to be inoperable solely because its emergency power source is inoperable, or solely because its normal power source is inoperable, it may be considered OPERABLE for the purpose of satisfying the requirements of its applicable Limiting Condition for Operation, provided: (1) its corresponding normal or emergency power source is OPERABLE; and (2) all of its redundant system (s),
subsystem (s), train (s), component (s) and device (s) are OPERABLE, or likewise satisfy the requirements of this specification. Unless both conditions (1) and (2) are satisfied, the unit shall be placed in at least HOT SHUTDOWN within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and in at least COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.
This specification is not applicable in Conditions 4 or 5.
80062 30390 BRUNSWICK-UNIT 1 3/4 0-1
u
'APPLICABILXTY SURVEILLANCE REQUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL CONDITIONS or other states -specified for individual Limiting Conditions for Operation unless otherwise stated in an individual Surveillance Requirement.
4.0.2 Each Surveillance Requirement shall be performed within the specified time interval with:
- a. A' maximum allowable extension not to exceed 25% of the surveil-lance interval,
- b. A total maximum combined interval time for any 3 consecutive sur-veillance intervals not to exceed 3.25 times the specified surveil-lance interval.
4.0.3 Performance of a Surveillance Requirement within the specified time interval shall constitute compliance with OPERABILITY requirements for a Limiting Condition for Operation and associated ACTION statements unless otherwise required by the specification. Surveillance requirements do not have to be performed on inoperable equipment.
4.0.4 Entry into an OPERATIONAL CONDITION or other specified applicable state shall not be made unless the Surveillance Requirement (s) associated with the Limiting Condition for Operation have been performed within the applicable surveillance interval or as otherwise specified.
4.0.5 Surveillance Requirements for irservice inspection and testing of ASME Code Class 1, 2 & 3 components shall be applicable as follows:
- a. During the time period:
- 1. From issuance of the Facility Operating License to the start of facility commercial operation, inservice testing of ASME Code Class 1, 2 & 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code 1974 Edition, and Addenda through Winter 1975 except where specific written relief has been granted by the Coninis sion .
- 2. Following start of facility commercial operation, inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing of ASME Code Class 1, 2, and 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Com-mission pursuant to 10 CFR 50, Section 50.55a(g) (6) (i).
BRUNSWICK-UNIT 1 3/4 0-2
APPLICABILXTY BASES 3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason.
The provisions of this specification permit the ACTION statemente associ-ated. with individual systems, subsystems, trains, components or devices to be consistent with the ACTION statements of the associated electrical power source. It allows operation to be governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source.
For example, Specification 3.8.1.1 requires in part that all four emergency diesel generators be OPERABLE. The ACTION statement provides f or a 72-hour out-of-service time when one emergency diesel generator is not OPERABLE.
If the definition of OPERABLE were applied without consideration of Speci-fication 3.0.5, all systems, subsystems, trains, components and devices supplied by the inoperable emergency power source would also be inoperable.
This would dictate invoking the applicable ACTION statements for each of the applicable Limiting Conditions for Operation. However, the provisions of Specification 3.0.5 permit the time limits for continued operation to be consistent with the ACTION statement for the inoperable emergency diesel generator instead, provided the other specified conditions are satisfied.
If they are not satisfied, shutdown is required in accordance with this specification.
As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION statement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specification 3.0.5, all sys tems, subsys tems, trains, components and devices supplied by the inoperable normal power sources, both of the off-site circuits, would also be inoperable. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continue.d operation to be consistent with the ACTION statement for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must bc OPERABLE (as must be the components supplied by the emergency power sourec) and all redundant systems, subsystems, trains, components and devices in the other division must be OPERABLE, i
BRUNSWICK-UNIT 1 B 3/4 0-la
APPLICABILITY BASES-or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source OPERABLE) . In other words, all emergency power sources must be OPERABLE and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification.
In Condition 4 or 5 SpeciEication 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to.
t 6
m BRUNSWICK-UNII 1 B 3/4 0-lb
3/4 LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REQUIREMENTS 3/4.0 APPLICABILITY LIMITING CONDITION FOR OPERATION 3 . 0.1 Limiting Conditions for Operation and ACTION requirements shall be applicable during the OPERATIONAL CONDITIONS or other states specified for each specification.
3.0.2 Adherence to the requirements of the Limiting Condition for Opera-tion and associated ACTION within the specified time interval shall con-stitute compliance with the specification. In the event the Limiting Condition for Operation is restored prior to expiration of the specified time interval, completion of the ACTION statement is not required.
3.0.3 In the event a Limiting Condition for Operation and/or associated ACTION requirements cannot be satisfied because of circumstances in excess of those addressed in the specification, the unit shall be placed in l l at least HOT SHUTDOWN within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the fol-lowing 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br /> unless corrective measures are completed that permit opera-tion under the permissible ACTION statements for the specified time interval as measured from initial discovery. Exceptions to these requirements shall be stated in the individual specifications.
3.0.4 Entry into an OPERATIONAL CONDITION or other specified applicability state shall not be made unless the con-itions of the Limiting Condition for Operation are met without reliance on provisions contained in the ACTION statements unless otherwise excepted. This provision shall not prevent passage thru OPERATIONAL CONDITIONS required to comply with ACTION requirements.
3.0.5 When a system, subsystem, train, component or device is determined to be inoperable solely because its emergency power source is inoperable, or solely because its normal power source is incperable, it may be considered OPERABLE for the purpose of satisfying the requirements of its applicable Limiting Condition for Operation, provided: (1) its corresponding normal or {
emergency power source is OPERABLE; and (2) all of its redundant system (s), 1 subsystem (s), train (s), component (s) and device (s) are OPERABLE, or likewise satisfy the requirements of this specification. Unless both conditions (1) I and (2) are satisfied, the unit shall be placed in at least HOT SHUTDOWN within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and in at least COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />. i This specification is not applicable in Conditions 4 or 5.
l l
BRUNSWICK _ " NIT 2 3/4 0-1
APPLICABILITY SURVEILLANCE REOUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL CONDITIONS or other states -specified for individual Limiting Conditions for Opeiation unless otherwise stated in an individual Surveillance Requirement.
4.0.2 Each Surveillance Requirement shall be performed within the specified time interval with:
- a. A maximum allowable extension not to exceed 25% of the surveil-lance interval,
- b. A total maximum combined interval time for any 3 consecutive sur-veillance intervals not to exceed 3.25 times the specified surveil-lance interval.
4.0.3 Performance of a Surveillance Requirement within the specified time interval shall constitute compliance with OPERABILITY requirements for a Limiting Condition for Operation and associated ACTION statements unless otherwise required by the specification. Surveillance requirements do not have to be performed on inoperable equipment.
4.0.4 Entry into an OPERATIONAL CONDITION or other specified applicable state shall not be made unless the Surveillance Requirement (s) associated with the Limiting Condition for Operation have been performed within the applicable surveillance interval or as otherwise specified.
4.0.5 Surveillance Requirements for inservice inspection and testing of ASME Code Class 1, 2 & 3 components shall be applicable as follows:
- a. During the time period:
- 1. From issuance of the Facility Operating License to the start of facility commercial operation, inservice testing of ASME Code Class 1, 2 & 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code 1974 Edition, and Addenda through Winter 1975 except where specific written relief has been granted by the comission.
- 2. Following start of facility commercial operation, inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing of ASME Code Class 1, 2, and 3 pumps and valves shall be performed in accordance with Section XI of l the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Com-mission pursuant to 10 CFR 50, Section 50.55a(g) (6) (i).
BRUNSWICK - UNIT 2 3/4 0-2 l
l
APPLICABILITY BASES-3.0.5 This specification delineates what additional conditions must be satisfied to permit operation to continue, consistent with the ACTION statements for power sources, when a normal or emergency power source is not OPERABLE. It specifically prohibits operation when one division is inoperable because its normal or emergency power source is inoperable and a system, subsystem, train, component or device in another division is inoperable for another reason.
The provisions of this specification permit the ACTION statements associ-ated. with individual systems, subsys tems, trains, components or devices to be censistent ,with the ACTION statements of the associated electrical power source. It allows operation to be . governed by the time limits of the ACTION statement associated with the Limiting Condition for Operation for the normal or emergency power source, not the individual ACTION state-ments for each system, subsystem, train, component or device that is determined to be inoperable solely because of the inoperability of its normal or emergency power source.
For example. Specification 3.8.1.1 requires in part that all four e=ergency diesel generators be OPERABLE. The ACTION statement provides for a 72-hour out-of-service time when one emergeacy diesel generator is not OPERABLE.
If the definition of OPERABLE were applic! without consideration of Speci-fication 3.0.5, all systems, subsystems, trains, components and devices supplied by the inoperable emergency power source would also be inoperable.
This would dictate invoking the applicable ACTION statements for each of the applicable Limiting Conditions for Operation. However, the provisions of Specification 3.0.5 permit the time limits for continued operation to be consistent with the ACTION statement for the, inoperable emergency diesel generator instead, provided the other specified conditions are satisfied.
If they are not satisfied, shutdown is required in accordance with this specification.
As a further example, Specification 3.8.1.1 requires in part that two physically independent circuits between the off-site transmission network and the on-site Class IE distribution system be OPERABLE. The ACTION s tatement provides a 24-hour out-of-service time when both required off-site circuits are not OPERABLE. If the definition of OPERABLE were applied without consideration of Specifica tion 3.0.5, a_i sys tems, subsys tems , trains, components and devices supplied by the inoperable normal power sources, koth of the off-site circuits, would also be inoperabic. This,would dictate invoking the applicable ACTION statements for each of the applicable LCOs. However, the provisions of Specification 3.0.5 permit the time limits for continued operation to be consistent with the ACTION statement 'for the inoperable normal power sources instead, provided the other specified conditions are satisfied. In this case, this would mean that for one division the emer-gency power source must be OPERABLE (as must be the components supplied by the emergency power source) and all redundant systems, subsystems, trai:n, components and devices in the other division must be OPERABLE, BRUNSWICK-UNIT 2 B 3/4 0-la
, APPLICABILITY BASES or likewise satisfy Specification 3.0.5 (i.e., be capable of performing their design functions and have an emergency power source. OPERABLE). In other words, all emergency power sources must be OPERABL ' and all redundant systems, subsystems, trains, components and devices in both divisions must also be OPERABLE. If these conditions are not satisfied, shutdown is required in accordance with this specification.
In Condition 4 or 5 Speci51 cation 3.0.5 is not applicable, and thus the individual ACTION statements for each applicable Limiting Condition for Operation in these Conditions must be adhered to.
B BRUNSWICK-UNIT 2 B 3/4 0-lb
.. .