Information Notice 1997-87, Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
| issue date = 12/12/1997
| issue date = 12/12/1997
| title = Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility
| title = Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility
| author name = Cool D A
| author name = Cool D
| author affiliation = NRC/NMSS/IMNS
| author affiliation = NRC/NMSS/IMNS
| addressee name =  
| addressee name =  
Line 14: Line 14:
| page count = 7
| page count = 7
}}
}}
{{#Wiki_filter:UNITED STATESNUCLEAR REGULATORY COMMISSIONOFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDSWASHINGTON, DC 20555December 12, 1997NRC INFORMATION NOTICE 97-87: SECOND RETROFIT TO INDUSTRIAL NUCLEARCOMPANY IRiOO RADIOGRAPHY CAMERA, TOCORRECT INCONSISTENCY IN 10 CFR PART 34COMPATIBILITY
{{#Wiki_filter:UNITED STATES
 
NUCLEAR REGULATORY COMMISSION
 
SAFETY AND SAFEGUARDS
 
OFFICE OF NUCLEAR MATERIAL DC 20555 WASHINGTON,
                                                December 12, 1997 NOTICE     97-87:     SECOND       RETROFIT TO INDUSTRIAL NUCLEAR
 
NRC INFORMATION                                                                            CAMERA, TO
 
COMPANY IRiOO RADIOGRAPHY
 
10 CFR PART 34 CORRECT INCONSISTENCY IN
 
COMPATIBILITY


==Addressees==
==Addressees==
All industrial radiography licensees.PuMroseThe U.S. Nuclear Regulatory Commission (NRC) is issuing this information notice to makelicensees aware of a retrofit to the lock of the Industrial Nuclear Company (INC) Model IR100Radiography Camera, to correct an inconsistency in 10 CFR Part 34 compatibility. It isexpected that recipients will review the information for applicability to their licensed activities,and consider actions, as appropriate, to avoid problems. However, suggestions contained inthis information notice are not NRC requirements; therefore, no specific action nor writtenresponse is required.
All industrial radiography licensees.
 
PuMrose
 
make
 
Regulatory     Commission         (NRC) is issuing this information notice to
 
The U.S. Nuclear                                                                          (INC) Model IR100
                                            lock of the Industrial Nuclear Company
 
licensees aware of a retrofit to the                                                                 It is
 
Camera,   to correct   an   inconsistency in 10 CFR Part 34 compatibility. activities, Radiography                                                                          their licensed
 
the information for applicability to
 
expected that recipients will review                avoid problems.   However,   suggestions   contained in
 
as  appropriate,    to
 
and consider actions,                                                                    action nor written
 
requirements; therefore, no specific
 
this information notice are not NRC
 
response is required.
 
Description      Circumstances
 
of
 
June 18, retrofit to  the  safety  latch  plate  (NRC Information Notice 97-35, dated would not
 
The recent                                                                                  camera
 
where the INC Model IR100 radiography
 
1997), which corrected a scenario                      by 10 CFR 34.20,    resulted in the  equipment not
 
shock    test, as  required                                                    personnel.
 
pass the horizontal
 
the  requirement    that the  lock  should not be easily removed by unauthorized    correct  the
 
meeting                                                                                    to
 
the  State  of  California  evaluated      the problem, and INC took action
 
INC and
 
situation.
 
Discusion
 
more "fragile areas
 
Latch Plate"    on the  IR100    radiography camera has a potentially
 
The "Safety                                                                                  tested.
 
Paragraph 8.3.2) than the area previouslyof the plate (with
 
(as specified in ANSI N432-1980,                                                  surface
 
was struck directly on the front
 
Apparently, if the Safety Latch Plate                                                              inoperable. It
 
in the safe  locked    position),    the plate could be deformed and deemed      top  and side. To
 
the source
 
the  plate  might    be  susceptible  to damage if struck from the
 
also appeared    that                                                                            prevent
 
was not possible, a bumper that would
 
ensure that this type of potential damage
 
9¢ho                  ROTOR-q1og              0          rlal
 
_ asd 64thaf %
      9120901                    1i'
                                                                                                        .1 b ([12 -f /,c
 
IN 97-87 December 12,1997 deformation was welded to the back of the Safety Latch Plate, and the outer top edge of the plate
 
was angled at a 45-to-50-degree angle, to a depth of approximately 3 mm (0.12 inch). The
 
modified device was tested to ensure compliance with ANSI N432-1980, paragraph 8.2.
 
In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to the
 
device were such that they were easily removed by the user. This is contrary to requirements in
 
10 CFR 34.20(a) which states that all devices in use meet the requirements of ANSI N432-1980.
 
ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is not
 
easily removable by unauthorized personnel." To correct this situation, INC has modified the
 
device design to secure the lock screws by placing a self-adhesive metal foil over the screws.
 
The foil and adhesive are such that the foil is difficult to remove and cannot be removed and
 
replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel
 
from accessing the screws, and to provide a means to alert the licensee to possible tamperinq of
 
the lock. INC has indicated that it will contact all owners of potentially affected cameras, on
 
record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them
 
with the foil covers and instructions on retrofitting the devices. Attachment I contains a copy of
 
the retrofit letter.
 
All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, or
 
the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that
 
they have not received their kits. Affected cameras may be checked for completed retrofits
 
during any inspection.
 
This information notice requires no specific action nor written response. If you have any
 
questions about the information in this notice, please contact one of the technical contacts listed
 
below or the appropriate regional office.
 
\.9 Donald A. Cool, Director
 
Division of Industrial and
 
Medical Nuclear Safety
 
Office of Nuclear Material Safety
 
and Safeguards
 
Technical contacts:      David Wesley
 
Dept. of Health Services
 
State of California
 
(916) 445-1884 Michele Burgess, NMSS
 
301415-5868 E-mail: mlb5@nrc.gov
 
Attachments: /V"                    g                  ke
 
1. INC Retrofit Letter
 
2. List of Recently Issued NMSS Information Notices
 
3. List of Recently Issued NRC Information Notices
 
IIN 97-87 December 12, 1997 INDUSTRLAL NUCLEAR CCO K'c.
 
I
 
s
 
I
 
OCTOBER 24,          1§97 i
 
SUBJECT;          IR-  00 EXPOSURE DEVICE LQCK.
 
DEAR CUSTOMERi
 
i
 
8 I
 
ACCORDING TO              I    17 CC 30332(C)(1) AND ANSI N432-19 0,5.
 
IS NOT
 
1.2.1, EACH                IOGRkpHIC DEVICE MUAT HAVE A LOCK THAT
 
BY UNAUTOIZE    PRSONNEL.      IN  OTHER  WORDS
 
EASILY BMA3 ONLY KNOWLED                LE  OR AUTHORIZED  PtRSONNEL SHOULD DISMANTLE
 
THE LOCK ASSE BLY.
 
INSTALL A HEAVY
 
TO rNSURE THEI ABOVE REGULATION, INC WILL                      LOCK BOX (RIGHT
 
LABL OVER T        ALLEN  SCREW    ON  THE
 
DUTY FOI                                                            ONLY BY
 
LABEL WILL STATE  "tO    BE  REMOVED
 
SIDE OLY) TS
 
AUTHORIZED PESONNEL.
 
CHARGE ON EVERY DEVICE
 
INC WILL INSTALL THE LABELS FREE OF                            IF WE DO NOT
 
SHIPPED TO US! FOR RELOADING            OR  MAIOTAINENCE.
 
f'o DAYS  !FROM    THE  ABOVE  DATE, WE
 
RECIEvE YOUR DEVICE WITHIN                    TO INSTALL.
 
WILL SEND YOU' THE LABELS FOR YOU
 
IF  YOU HAVE ANY QUESTIONS
 
THANK YOU FOA YOUR CONTINUED SUPPORT.
 
PLEASE CALL ipic AT 1-800-711-1962.
 
VERY TRULY YOURS.
 
S.A      . UDDLE        ON                      '''
                                        I
 
.,                          I
 
I                          I
 
CAMOCE:
  14220 Waks Bh&
                _    u~ Len.  CAW
 
w4(510) as
 
.o.-T^l 0 ^-
 
"Sclment 2 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED
 
NMSS INFORMATION NOTICES
 
Information                                    Date of
 
Notice No.        Subject                    Issuance  Issued to
 
97-86      Additional Controls for Transport  12/12/97  Registered users of the Model
 
of the Amersham Model No. 660                No. 660 series packages, and


==Description of Circumstances==
Series Radiographic Exposure                  Nuclear Regulatory Commission
The recent retrofit to the safety latch plate (NRC Information Notice 97-35, dated June 18,1997), which corrected a scenario where the INC Model IR100 radiography camera would notpass the horizontal shock test, as required by 10 CFR 34.20, resulted in the equipment notmeeting the requirement that the lock should not be easily removed by unauthorized personnel.INC and the State of California evaluated the problem, and INC took action to correct thesituation.DiscusionThe "Safety Latch Plate" on the IR100 radiography camera has a potentially more "fragile areas(as specified in ANSI N432-1980, Paragraph 8.3.2) than the area previously tested.Apparently, if the Safety Latch Plate was struck directly on the front surface of the plate (withthe source in the safe locked position), the plate could be deformed and deemed inoperable. Italso appeared that the plate might be susceptible to damage if struck from the top and side. Toensure that this type of potential damage was not possible, a bumper that would prevent9¢ ho ROTOR- q1og 0 rlal_ asd 64thaf %9120901 1i'.1 b ([12 -f /,c


IN 97-87December 12,1997 deformation was welded to the back of the Safety Latch Plate, and the outer top edge of the platewas angled at a 45-to-50-degree angle, to a depth of approximately 3 mm (0.12 inch). Themodified device was tested to ensure compliance with ANSI N432-1980, paragraph 8.2.In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to thedevice were such that they were easily removed by the user. This is contrary to requirements in10 CFR 34.20(a) which states that all devices in use meet the requirements of ANSI N432-1980.ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is noteasily removable by unauthorized personnel." To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tamperinq ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment I contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.\.9Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical contacts: David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS301415-5868E-mail: mlb5@nrc.govAttachments: /V" g ke1. INC Retrofit Letter2. List of Recently Issued NMSS Information Notices3. List of Recently Issued NRC Information Notices
Devices                                      industrial radiography licensees


IIN 97-87December 12, 1997 IsIiiIINDUSTRLAL NUCLEAR CCO K'c.OCTOBER 24, 1§97SUBJECT; IR- 00 EXPOSURE DEVICE LQCK.DEAR CUSTOMERiACCORDING TO I 17 CC 30332(C)(1) AND ANSI N432-1980,5.1.2.1, EACH IOGRkpHIC DEVICE MUAT HAVE A LOCK THAT IS NOTEASILY BMA3 BY UNAUTOIZE PRSONNEL. IN OTHER WORDSONLY KNOWLED LE OR AUTHORIZED PtRSONNEL SHOULD DISMANTLETHE LOCK ASSE BLY.TO rNSURE THEI ABOVE REGULATION, INC WILL INSTALL A HEAVYDUTY FOI LABL OVER T ALLEN SCREW ON THE LOCK BOX (RIGHTSIDE OLY) TS LABEL WILL STATE "tO BE REMOVED ONLY BYAUTHORIZED PESONNEL.INC WILL INSTALL THE LABELS FREE OF CHARGE ON EVERY DEVICESHIPPED TO US! FOR RELOADING OR MAIOTAINENCE. IF WE DO NOTRECIEvE YOUR DEVICE WITHIN f'o DAYS !FROM THE ABOVE DATE, WEWILL SEND YOU' THE LABELS FOR YOU TO INSTALL.THANK YOU FOA YOUR CONTINUED SUPPORT. IF YOU HAVE ANY QUESTIONSPLEASE CALL ipic AT 1-800-711-1962.VERY TRULY YOURS.S.A .UDDLE ON '''I., II IBh& _ u~ Len. CAWCAMOCE:14220 Waksw4 (510) as.o.-T^l 0 ^-
97-75      Enforcement Sanctions Issued       09/24/97  All U.S. Nuclear Regulatory
"Sclment 2IN 97-87December 12, 1997 LIST OF RECENTLY ISSUEDNMSS INFORMATION NOTICESInformation Date ofNotice No. Subject Issuance Issued to97-8697-7597-7297-6597-6497-6197-5897-57Additional Controls for Transportof the Amersham Model No. 660Series Radiographic ExposureDevicesEnforcement Sanctions Issuedas a Result of DeliberateViolations of NRC RequirementsPotential for Failureof the Omega SeriesSprinkler HeadsFailures of High-Dose-Rate Remote AfterloadingDevice Source Guide Tubes,Catheters, and ApplicatorsPotential ProblemsAssociated with Lossof Electrical Powerin Certain TeletherapyUnitsU.S. Department ofHealth and HumanServices Letter, toMedical Device Manu-facturers, on theYear 2000 ProblemMechanical Integrity ofIn-Situ Leach InjectionWells and PipingLeak Testing of PackagingUsed in the Transport ofRadioactive Material12/12/9709/24/9709/22/9708/15/9708/13/9708/06/9707/31/9707/30/97Registered users of the ModelNo. 660 series packages, andNuclear Regulatory Commissionindustrial radiography licenseesAll U.S. Nuclear RegulatoryCommission licenseesAll holders of OLs or CPsfor nuclear power reactorsand fuel cycle facilitiesAll high-dose-rate remoteafterloader licenseesAll U.S. Nuclear RegulatoryCommission medical tele-therapy licenseesAll U.S. Nuclear RegulatoryCommission medicallicensees, veterinarians,and manufacturers/distri-butors of medical devicesHolders of and Applicantsfor Licenses for In-SituLeach FacilitiesSuppliers and users ofpackaging for the trans-portation of radioactivematerial required to per-form packaging leak tests


Attachment 3IN 97-87December 12, 1997 LIST OF RECENTLY ISSUEDNRC INFORMATION NOTICESInformation Date ofNotice No. Subject Issuance Issued to97-8697-8597-8495-49,Sup. 197-8397-82Additional Controls forTransport of the AmershamModel No. 660 SeriesRadiographic Exposure DevicesEffects of Crud Buildupand Boron Deposition onPower Distribution andShutdown MarginRupture in ExtractionSteam Piping as aResult of Flow-AcceleratedCorrosionSeismic Adequacy ofThermo-Lag PanelsRecent Events InvolvingReactor Coolant SystemInventory Control DuringShutdownInadvertent Control RoomHalon Actuation Due to aCamera Flash12/12/9712/11/9712/11/9712/10/9712/05/9711/28/97Registered users of the ModelNo. 660 series packages, andNuclear Regulatory Commissionindustrial radiography licenseesAll holders of OLs for pressurized-water reactors, except thoselicensees who have permanentlyceased operations and havecertified that the fuel has beenpermanently removed from thereactor vesselAll holders of OLs for nuclearpower reactors except thosewho have permanently ceasedoperations and have certifiedthat fuel has been permanentlyremoved from the reactor vesselAll holders of OLs for nuclearpower reactorsAll holders of OLs for pressurized-water reactors, except thoselicensees who have permanentlyceased operations and havecertified that fuel has beenpermanently removed from thereactor vesselAll holders of OLs for nuclearpower reactorsOL = Operating LicenseCP = Construction Permit
as a Result of Deliberate                    Commission licensees


J ~IN 97-xxK~Novembe;r1997 easily removable by unauthorized personnel.! To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tampering ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Ucensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical Contacts:David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS(301) 415-5868E-mail: mlb5@nrc.govAttachments:1. INC retrofit letter2. Lst of Recently Issued NRC Information Notices3 List of Recently Issued NMSS Information NoticesDistribution:SSSS r/F NE02-SSD-3 KRamsey, IMOBCoordinated with State of California iejDOCUMENT NAME: A:\JR100lN.IN EKraus via fax 10/24197receive a copy of this document, Indicate In the box: v
Violations of NRC Requirements


* Copy wthout at'advemnenedosure v *Copy wlth attadmeenclosure NW No copyNOFFICE IMAB gIMAB i<Im IMA?3 e WMSK D IMi d DCi NAME IMABurgess A nd3aggefB I-CaBer M.icc iM DC%. lDATE 1,2 I Of /97
97-72      Potential for Failure              09/22/97   All holders of OLs or CPs
* I /97 /2/f1 /97 ho1J /97 '// 7OFFICIAL RECORD COPY


IN 97-.?November\wpr 97 easily removable by unauthorized personnel." To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tampering ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical Contacts: David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS(301) 415-5868E-mail: mlb5@nrc.govAttachments:1. INC retrofit letter2. List of Recently Issued NRC Information Notices3. List of Recently Issued NMSS Information NoticesDistribution:SSSS rH NE02-SSD-3 KRamsey, IMOBCoordinated with State of California PX-aDOCUMENT NAME: A:iR100N.IN EKraus via fax 10124197To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"
of the Omega Series                          for nuclear power reactors
* Copy with atachment/endosure AND m No copyl OFFICE IMAB m IMAB I IMAB 'n0- 1 IMORt\ IMPS W 14% LNAME MMBurgesslmb 1SBaggett LCamper IJPiqw 1DC4 //DATE /,2 / Oe /97 7 Y 7 /97 12f 9 1- /97 I-i/ r-\47OFFICIAL RECORD COPY


}}
Sprinkler Heads                              and fuel cycle facilities
 
97-65      Failures of High-Dose-              08/15/97  All high-dose-rate remote
 
Rate Remote Afterloading                      afterloader licensees
 
Device Source Guide Tubes, Catheters, and Applicators
 
97-64      Potential Problems                  08/13/97  All U.S. Nuclear Regulatory
 
Associated with Loss                          Commission medical tele- of Electrical Power                            therapy licensees
 
in Certain Teletherapy
 
Units
 
U.S. Department of                  08/06/97  All U.S. Nuclear Regulatory
 
97-61 Health and Human                              Commission medical
 
Services Letter, to                          licensees, veterinarians, Medical Device Manu-                          and manufacturers/distri- facturers, on the                            butors of medical devices
 
Year 2000 Problem
 
Mechanical Integrity of            07/31/97    Holders of and Applicants
 
97-58                                                      for Licenses for In-Situ
 
In-Situ Leach Injection
 
Leach Facilities
 
Wells and Piping
 
97-57      Leak Testing of Packaging          07/30/97  Suppliers and users of
 
Used in the Transport of                      packaging for the trans- Radioactive Material                          portation of radioactive
 
material required to per- form packaging leak tests
 
Attachment 3 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED
 
NRC INFORMATION NOTICES
 
Information                                        Date of
 
Notice No.            Subject                      Issuance  Issued to
 
97-86            Additional Controls for          12/12/97  Registered users of the Model
 
Transport of the Amersham                    No. 660 series packages, and
 
Model No. 660 Series                        Nuclear Regulatory Commission
 
Radiographic Exposure Devices                industrial radiography licensees
 
97-85            Effects of Crud Buildup          12/11/97  All holders of OLs for pressurized- and Boron Deposition on                      water reactors, except those
 
Power Distribution and                      licensees who have permanently
 
Shutdown Margin                              ceased operations and have
 
certified that the fuel has been
 
permanently removed from the
 
reactor vessel
 
97-84            Rupture in Extraction            12/11/97  All holders of OLs for nuclear
 
Steam Piping as a                            power reactors except those
 
Result of Flow-Accelerated                  who have permanently ceased
 
Corrosion                                    operations and have certified
 
that fuel has been permanently
 
removed from the reactor vessel
 
95-49,            Seismic Adequacy of                12/10/97  All holders of OLs for nuclear
 
Thermo-Lag Panels                            power reactors
 
Sup. 1
97-83            Recent Events Involving            12/05/97  All holders of OLs for pressurized- Reactor Coolant System                        water reactors, except those
 
Inventory Control During                      licensees who have permanently
 
Shutdown                                      ceased operations and have
 
certified that fuel has been
 
permanently removed from the
 
reactor vessel
 
Inadvertent Control Room          11/28/97    All holders of OLs for nuclear
 
97-82 Halon Actuation Due to a                      power reactors
 
Camera Flash
 
OL = Operating License
 
CP = Construction Permit
 
J                    ~IN 9 7 -xxK~
                                                                                        Novembe;r1997 easily removable by unauthorized personnel.! To correct this situation, INC has modified the
 
device design to secure the lock screws by placing a self-adhesive metal foil over the screws.
 
The foil and adhesive are such that the foil is difficult to remove and cannot be removed and
 
replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel
 
from accessing the screws, and to provide a means to alert the licensee to possible tampering of
 
the lock. INC has indicated that it will contact all owners of potentially affected cameras, on
 
record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them
 
with the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy of
 
the retrofit letter.
 
All affected cameras should be retrofitted as soon as possible. Ucensees should contact INC, or
 
the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that
 
they have not received their kits. Affected cameras may be checked for completed retrofits
 
during any inspection.
 
This information notice requires no specific action nor written response. If you have any
 
questions about the information in this notice, please contact one of the technical contacts listed
 
below or the appropriate regional office.
 
Donald A. Cool, Director
 
Division of Industrial and
 
Medical Nuclear Safety
 
Office of Nuclear Material Safety
 
and Safeguards
 
Technical Contacts:          David Wesley
 
Dept. of Health Services
 
State of California
 
(916) 445-1884 Michele Burgess, NMSS
 
(301) 415-5868 E-mail: mlb5@nrc.gov
 
Attachments:
            1. INC retrofit letter
 
2. Lst of Recently Issued NRC Information Notices
 
3 List of Recently Issued NMSS Information Notices
 
Distribution:
            SSSS r/F                    NE02-SSD-3                  KRamsey, IMOB
 
Coordinated with State of California                                                                          iej
 
i
 
DOCUMENT NAME: A:\JR100lN.IN                                                                                  EKraus via fax 10/24197 receive a copy of this document, Indicate In the box:  v
 
* Copy wthout at'advemnenedosure v *Copy wlth attadmeenclosure NW No copy
 
NOFFICE        IMAB gIMAB                              ei<Im          IMA?3                    WMSK    d D          IMi
 
DC
 
NAME IMABurgess A nd3aggefB                                          I-CaBer                  M.icc                DC%.
 
iM  l
 
DATE          1,2 I Of /97                  *I          /97          /2/f1    /97          ho1J      /97        '//        7 OFFICIAL RECORD COPY
 
IN97-.?
 
November\wpr 97 easily removable by unauthorized personnel." To correct this situation, INC has modified the
 
device design to secure the lock screws by placing a self-adhesive metal foil over the screws.
 
The foil and adhesive are such that the foil is difficult to remove and cannot be removed and
 
replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel
 
from accessing the screws, and to provide a means to alert the licensee to possible tampering of
 
the lock. INC has indicated that it will contact all owners of potentially affected cameras, on
 
record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them
 
with the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy of
 
the retrofit letter.
 
All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, or
 
the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that
 
they have not received their kits. Affected cameras may be checked for completed retrofits
 
during any inspection.
 
This information notice requires no specific action nor written response. If you have any
 
questions about the information in this notice, please contact one of the technical contacts listed
 
below or the appropriate regional office.
 
Donald A. Cool, Director
 
Division of Industrial and
 
Medical Nuclear Safety
 
Office of Nuclear Material Safety
 
and Safeguards
 
Technical Contacts:          David Wesley
 
Dept. of Health Services
 
State of California
 
(916) 445-1884 Michele Burgess, NMSS
 
(301) 415-5868 E-mail: mlb5@nrc.gov
 
Attachments:
              1. INC retrofit letter
 
2. List of Recently Issued NRC Information Notices
 
3. List of Recently Issued NMSS Information Notices
 
Distribution:
              SSSS rH                      NE02-SSD-3                  KRamsey, IMOB
 
Coordinated with State of California                                                                              PX-a
 
DOCUMENT NAME: A:iR100N.IN                                                                                          EKraus via fax 10124197 To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"*  Copy with atachment/endosure AND m No copy
 
l OFFICE IMAB                          m    IMAB                I    IMAB        'n0- 1        IMORt\                    W
 
IMPS  14%        L
 
NAME          MMBurgesslmb                1SBaggett                    LCamper                  IJPiqw                  1DC4 //
  DATE          /,2 / Oe      /97          7        Y 7/97                          9          12f          1-/97          I-i/ r-\47 OFFICIAL RECORD COPY}}


{{Information notice-Nav}}
{{Information notice-Nav}}

Latest revision as of 04:48, 24 November 2019

Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility
ML031050023
Person / Time
Site: Beaver Valley, Millstone, Hatch, Monticello, Calvert Cliffs, Dresden, Davis Besse, Peach Bottom, Browns Ferry, Salem, Oconee, Mcguire, Nine Mile Point, Palisades, Palo Verde, Perry, Indian Point, Fermi, Kewaunee, Catawba, Harris, Wolf Creek, Saint Lucie, Point Beach, Oyster Creek, Watts Bar, Hope Creek, Grand Gulf, Cooper, Sequoyah, Byron, Pilgrim, Arkansas Nuclear, Three Mile Island, Braidwood, Susquehanna, Summer, Prairie Island, Columbia, Seabrook, Brunswick, Surry, Limerick, North Anna, Turkey Point, River Bend, Vermont Yankee, Crystal River, Haddam Neck, Ginna, Diablo Canyon, Callaway, Vogtle, Waterford, Duane Arnold, Farley, Robinson, Clinton, South Texas, San Onofre, Cook, Comanche Peak, Yankee Rowe, Maine Yankee, Quad Cities, Humboldt Bay, La Crosse, Big Rock Point, Rancho Seco, Zion, Midland, Bellefonte, Fort Calhoun, FitzPatrick, McGuire, LaSalle, Fort Saint Vrain, Shoreham, Satsop, Trojan, Atlantic Nuclear Power Plant  Entergy icon.png
Issue date: 12/12/1997
From: Cool D
NRC/NMSS/IMNS
To:
References
IN-97-087, NUDOCS 9712090210
Download: ML031050023 (7)


UNITED STATES

NUCLEAR REGULATORY COMMISSION

SAFETY AND SAFEGUARDS

OFFICE OF NUCLEAR MATERIAL DC 20555 WASHINGTON,

December 12, 1997 NOTICE 97-87: SECOND RETROFIT TO INDUSTRIAL NUCLEAR

NRC INFORMATION CAMERA, TO

COMPANY IRiOO RADIOGRAPHY

10 CFR PART 34 CORRECT INCONSISTENCY IN

COMPATIBILITY

Addressees

All industrial radiography licensees.

PuMrose

make

Regulatory Commission (NRC) is issuing this information notice to

The U.S. Nuclear (INC) Model IR100

lock of the Industrial Nuclear Company

licensees aware of a retrofit to the It is

Camera, to correct an inconsistency in 10 CFR Part 34 compatibility. activities, Radiography their licensed

the information for applicability to

expected that recipients will review avoid problems. However, suggestions contained in

as appropriate, to

and consider actions, action nor written

requirements; therefore, no specific

this information notice are not NRC

response is required.

Description Circumstances

of

June 18, retrofit to the safety latch plate (NRC Information Notice 97-35, dated would not

The recent camera

where the INC Model IR100 radiography

1997), which corrected a scenario by 10 CFR 34.20, resulted in the equipment not

shock test, as required personnel.

pass the horizontal

the requirement that the lock should not be easily removed by unauthorized correct the

meeting to

the State of California evaluated the problem, and INC took action

INC and

situation.

Discusion

more "fragile areas

Latch Plate" on the IR100 radiography camera has a potentially

The "Safety tested.

Paragraph 8.3.2) than the area previouslyof the plate (with

(as specified in ANSI N432-1980, surface

was struck directly on the front

Apparently, if the Safety Latch Plate inoperable. It

in the safe locked position), the plate could be deformed and deemed top and side. To

the source

the plate might be susceptible to damage if struck from the

also appeared that prevent

was not possible, a bumper that would

ensure that this type of potential damage

9¢ho ROTOR-q1og 0 rlal

_ asd 64thaf %

9120901 1i'

.1 b ([12 -f /,c

IN 97-87 December 12,1997 deformation was welded to the back of the Safety Latch Plate, and the outer top edge of the plate

was angled at a 45-to-50-degree angle, to a depth of approximately 3 mm (0.12 inch). The

modified device was tested to ensure compliance with ANSI N432-1980, paragraph 8.2.

In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to the

device were such that they were easily removed by the user. This is contrary to requirements in

10 CFR 34.20(a) which states that all devices in use meet the requirements of ANSI N432-1980.

ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is not

easily removable by unauthorized personnel." To correct this situation, INC has modified the

device design to secure the lock screws by placing a self-adhesive metal foil over the screws.

The foil and adhesive are such that the foil is difficult to remove and cannot be removed and

replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel

from accessing the screws, and to provide a means to alert the licensee to possible tamperinq of

the lock. INC has indicated that it will contact all owners of potentially affected cameras, on

record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them

with the foil covers and instructions on retrofitting the devices. Attachment I contains a copy of

the retrofit letter.

All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, or

the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that

they have not received their kits. Affected cameras may be checked for completed retrofits

during any inspection.

This information notice requires no specific action nor written response. If you have any

questions about the information in this notice, please contact one of the technical contacts listed

below or the appropriate regional office.

\.9 Donald A. Cool, Director

Division of Industrial and

Medical Nuclear Safety

Office of Nuclear Material Safety

and Safeguards

Technical contacts: David Wesley

Dept. of Health Services

State of California

(916) 445-1884 Michele Burgess, NMSS

301415-5868 E-mail: mlb5@nrc.gov

Attachments: /V" g ke

1. INC Retrofit Letter

2. List of Recently Issued NMSS Information Notices

3. List of Recently Issued NRC Information Notices

IIN 97-87 December 12, 1997 INDUSTRLAL NUCLEAR CCO K'c.

I

s

I

OCTOBER 24, 1§97 i

SUBJECT; IR- 00 EXPOSURE DEVICE LQCK.

DEAR CUSTOMERi

i

8 I

ACCORDING TO I 17 CC 30332(C)(1) AND ANSI N432-19 0,5.

IS NOT

1.2.1, EACH IOGRkpHIC DEVICE MUAT HAVE A LOCK THAT

BY UNAUTOIZE PRSONNEL. IN OTHER WORDS

EASILY BMA3 ONLY KNOWLED LE OR AUTHORIZED PtRSONNEL SHOULD DISMANTLE

THE LOCK ASSE BLY.

INSTALL A HEAVY

TO rNSURE THEI ABOVE REGULATION, INC WILL LOCK BOX (RIGHT

LABL OVER T ALLEN SCREW ON THE

DUTY FOI ONLY BY

LABEL WILL STATE "tO BE REMOVED

SIDE OLY) TS

AUTHORIZED PESONNEL.

CHARGE ON EVERY DEVICE

INC WILL INSTALL THE LABELS FREE OF IF WE DO NOT

SHIPPED TO US! FOR RELOADING OR MAIOTAINENCE.

f'o DAYS !FROM THE ABOVE DATE, WE

RECIEvE YOUR DEVICE WITHIN TO INSTALL.

WILL SEND YOU' THE LABELS FOR YOU

IF YOU HAVE ANY QUESTIONS

THANK YOU FOA YOUR CONTINUED SUPPORT.

PLEASE CALL ipic AT 1-800-711-1962.

VERY TRULY YOURS.

S.A . UDDLE ON

I

., I

I I

CAMOCE:

14220 Waks Bh&

_ u~ Len. CAW

w4(510) as

.o.-T^l 0 ^-

"Sclment 2 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED

NMSS INFORMATION NOTICES

Information Date of

Notice No. Subject Issuance Issued to

97-86 Additional Controls for Transport 12/12/97 Registered users of the Model

of the Amersham Model No. 660 No. 660 series packages, and

Series Radiographic Exposure Nuclear Regulatory Commission

Devices industrial radiography licensees

97-75 Enforcement Sanctions Issued 09/24/97 All U.S. Nuclear Regulatory

as a Result of Deliberate Commission licensees

Violations of NRC Requirements

97-72 Potential for Failure 09/22/97 All holders of OLs or CPs

of the Omega Series for nuclear power reactors

Sprinkler Heads and fuel cycle facilities

97-65 Failures of High-Dose- 08/15/97 All high-dose-rate remote

Rate Remote Afterloading afterloader licensees

Device Source Guide Tubes, Catheters, and Applicators

97-64 Potential Problems 08/13/97 All U.S. Nuclear Regulatory

Associated with Loss Commission medical tele- of Electrical Power therapy licensees

in Certain Teletherapy

Units

U.S. Department of 08/06/97 All U.S. Nuclear Regulatory

97-61 Health and Human Commission medical

Services Letter, to licensees, veterinarians, Medical Device Manu- and manufacturers/distri- facturers, on the butors of medical devices

Year 2000 Problem

Mechanical Integrity of 07/31/97 Holders of and Applicants

97-58 for Licenses for In-Situ

In-Situ Leach Injection

Leach Facilities

Wells and Piping

97-57 Leak Testing of Packaging 07/30/97 Suppliers and users of

Used in the Transport of packaging for the trans- Radioactive Material portation of radioactive

material required to per- form packaging leak tests

Attachment 3 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED

NRC INFORMATION NOTICES

Information Date of

Notice No. Subject Issuance Issued to

97-86 Additional Controls for 12/12/97 Registered users of the Model

Transport of the Amersham No. 660 series packages, and

Model No. 660 Series Nuclear Regulatory Commission

Radiographic Exposure Devices industrial radiography licensees

97-85 Effects of Crud Buildup 12/11/97 All holders of OLs for pressurized- and Boron Deposition on water reactors, except those

Power Distribution and licensees who have permanently

Shutdown Margin ceased operations and have

certified that the fuel has been

permanently removed from the

reactor vessel

97-84 Rupture in Extraction 12/11/97 All holders of OLs for nuclear

Steam Piping as a power reactors except those

Result of Flow-Accelerated who have permanently ceased

Corrosion operations and have certified

that fuel has been permanently

removed from the reactor vessel

95-49, Seismic Adequacy of 12/10/97 All holders of OLs for nuclear

Thermo-Lag Panels power reactors

Sup. 1

97-83 Recent Events Involving 12/05/97 All holders of OLs for pressurized- Reactor Coolant System water reactors, except those

Inventory Control During licensees who have permanently

Shutdown ceased operations and have

certified that fuel has been

permanently removed from the

reactor vessel

Inadvertent Control Room 11/28/97 All holders of OLs for nuclear

97-82 Halon Actuation Due to a power reactors

Camera Flash

OL = Operating License

CP = Construction Permit

J ~IN 9 7 -xxK~

Novembe;r1997 easily removable by unauthorized personnel.! To correct this situation, INC has modified the

device design to secure the lock screws by placing a self-adhesive metal foil over the screws.

The foil and adhesive are such that the foil is difficult to remove and cannot be removed and

replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel

from accessing the screws, and to provide a means to alert the licensee to possible tampering of

the lock. INC has indicated that it will contact all owners of potentially affected cameras, on

record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them

with the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy of

the retrofit letter.

All affected cameras should be retrofitted as soon as possible. Ucensees should contact INC, or

the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that

they have not received their kits. Affected cameras may be checked for completed retrofits

during any inspection.

This information notice requires no specific action nor written response. If you have any

questions about the information in this notice, please contact one of the technical contacts listed

below or the appropriate regional office.

Donald A. Cool, Director

Division of Industrial and

Medical Nuclear Safety

Office of Nuclear Material Safety

and Safeguards

Technical Contacts: David Wesley

Dept. of Health Services

State of California

(916) 445-1884 Michele Burgess, NMSS

(301) 415-5868 E-mail: mlb5@nrc.gov

Attachments:

1. INC retrofit letter

2. Lst of Recently Issued NRC Information Notices

3 List of Recently Issued NMSS Information Notices

Distribution:

SSSS r/F NE02-SSD-3 KRamsey, IMOB

Coordinated with State of California iej

i

DOCUMENT NAME: A:\JR100lN.IN EKraus via fax 10/24197 receive a copy of this document, Indicate In the box: v

  • Copy wthout at'advemnenedosure v *Copy wlth attadmeenclosure NW No copy

NOFFICE IMAB gIMAB ei<Im IMA?3 WMSK d D IMi

DC

NAME IMABurgess A nd3aggefB I-CaBer M.icc DC%.

iM l

DATE 1,2 I Of /97 *I /97 /2/f1 /97 ho1J /97 '// 7 OFFICIAL RECORD COPY

IN97-.?

November\wpr 97 easily removable by unauthorized personnel." To correct this situation, INC has modified the

device design to secure the lock screws by placing a self-adhesive metal foil over the screws.

The foil and adhesive are such that the foil is difficult to remove and cannot be removed and

replaced without showing signs of damage. The foil will serve to inhibit unauthorized personnel

from accessing the screws, and to provide a means to alert the licensee to possible tampering of

the lock. INC has indicated that it will contact all owners of potentially affected cameras, on

record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them

with the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy of

the retrofit letter.

All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, or

the State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report that

they have not received their kits. Affected cameras may be checked for completed retrofits

during any inspection.

This information notice requires no specific action nor written response. If you have any

questions about the information in this notice, please contact one of the technical contacts listed

below or the appropriate regional office.

Donald A. Cool, Director

Division of Industrial and

Medical Nuclear Safety

Office of Nuclear Material Safety

and Safeguards

Technical Contacts: David Wesley

Dept. of Health Services

State of California

(916) 445-1884 Michele Burgess, NMSS

(301) 415-5868 E-mail: mlb5@nrc.gov

Attachments:

1. INC retrofit letter

2. List of Recently Issued NRC Information Notices

3. List of Recently Issued NMSS Information Notices

Distribution:

SSSS rH NE02-SSD-3 KRamsey, IMOB

Coordinated with State of California PX-a

DOCUMENT NAME: A:iR100N.IN EKraus via fax 10124197 To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"* Copy with atachment/endosure AND m No copy

l OFFICE IMAB m IMAB I IMAB 'n0- 1 IMORt\ W

IMPS 14% L

NAME MMBurgesslmb 1SBaggett LCamper IJPiqw 1DC4 //

DATE /,2 / Oe /97 7 Y 7/97 9 12f 1-/97 I-i/ r-\47 OFFICIAL RECORD COPY