Information Notice 1997-87, Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 14: Line 14:
| page count = 7
| page count = 7
}}
}}
{{#Wiki_filter:UNITED STATESNUCLEAR REGULATORY COMMISSIONOFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDSWASHINGTON, DC 20555December 12, 1997NRC INFORMATION NOTICE 97-87: SECOND RETROFIT TO INDUSTRIAL NUCLEARCOMPANY IRiOO RADIOGRAPHY CAMERA, TOCORRECT INCONSISTENCY IN 10 CFR PART 34COMPATIBILITY
{{#Wiki_filter:UNITED STATES NUCLEAR REGULATORY
 
COMMISSION
 
===OFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDS===
WASHINGTON, DC 20555 December 12, 1997 NRC INFORMATION
 
NOTICE 97-87: SECOND RETROFIT TO INDUSTRIAL
 
NUCLEAR COMPANY IRiOO RADIOGRAPHY
 
CAMERA, TO CORRECT INCONSISTENCY
 
===IN 10 CFR PART 34 COMPATIBILITY===


==Addressees==
==Addressees==
All industrial radiography licensees.PuMroseThe U.S. Nuclear Regulatory Commission (NRC) is issuing this information notice to makelicensees aware of a retrofit to the lock of the Industrial Nuclear Company (INC) Model IR100Radiography Camera, to correct an inconsistency in 10 CFR Part 34 compatibility. It isexpected that recipients will review the information for applicability to their licensed activities,and consider actions, as appropriate, to avoid problems. However, suggestions contained inthis information notice are not NRC requirements; therefore, no specific action nor writtenresponse is required.
All industrial
 
radiography
 
licensees.
 
PuMrose The U.S. Nuclear Regulatory
 
Commission (NRC) is issuing this information
 
notice to make licensees
 
aware of a retrofit to the lock of the Industrial
 
Nuclear Company (INC) Model IR100 Radiography
 
Camera, to correct an inconsistency
 
in 10 CFR Part 34 compatibility.
 
It is expected that recipients
 
will review the information
 
for applicability
 
to their licensed activities, and consider actions, as appropriate, to avoid problems.
 
However, suggestions
 
contained
 
in this information
 
notice are not NRC requirements;  
therefore, no specific action nor written response is required.Description
 
of Circumstances
 
The recent retrofit to the safety latch plate (NRC Information
 
Notice 97-35, dated June 18, 1997), which corrected
 
a scenario where the INC Model IR100 radiography
 
camera would not pass the horizontal
 
shock test, as required by 10 CFR 34.20, resulted in the equipment
 
not meeting the requirement
 
that the lock should not be easily removed by unauthorized
 
personnel.
 
INC and the State of California
 
evaluated
 
the problem, and INC took action to correct the situation.
 
Discusion The "Safety Latch Plate" on the IR100 radiography
 
camera has a potentially
 
more "fragile areas (as specified
 
in ANSI N432-1980, Paragraph
 
8.3.2) than the area previously
 
tested.Apparently, if the Safety Latch Plate was struck directly on the front surface of the plate (with the source in the safe locked position), the plate could be deformed and deemed inoperable.
 
It also appeared that the plate might be susceptible
 
to damage if struck from the top and side. To ensure that this type of potential
 
damage was not possible, a bumper that would prevent 9¢ ho ROTOR- q1og 0 rlal_ asd 64thaf %9120901 1i'.1 b ([12 -f /,c
 
IN 97-87 December 12,1997 deformation
 
was welded to the back of the Safety Latch Plate, and the outer top edge of the plate was angled at a 45-to-50-degree
 
angle, to a depth of approximately
 
3 mm (0.12 inch). The modified device was tested to ensure compliance
 
with ANSI N432-1980, paragraph
 
8.2.In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to the device were such that they were easily removed by the user. This is contrary to requirements
 
in 10 CFR 34.20(a) which states that all devices in use meet the requirements
 
of ANSI N432-1980.
 
ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is not easily removable
 
by unauthorized
 
personnel." To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive
 
metal foil over the screws.The foil and adhesive are such that the foil is difficult
 
to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized
 
personnel from accessing
 
the screws, and to provide a means to alert the licensee to possible tamperinq
 
of the lock. INC has indicated
 
that it will contact all owners of potentially
 
affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions
 
on retrofitting
 
the devices. Attachment
 
I contains a copy of the retrofit letter.All affected cameras should be retrofitted
 
as soon as possible.
 
Licensees
 
should contact INC, or the State of California, to obtain retrofit kits or assistance
 
with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed
 
retrofits during any inspection.
 
This information
 
notice requires no specific action nor written response.
 
If you have any questions
 
about the information
 
in this notice, please contact one of the technical
 
contacts listed below or the appropriate
 
regional office.\.9 Donald A. Cool, Director Division of Industrial
 
and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards
 
Technical
 
contacts:
David Wesley Dept. of Health Services State of California
 
(916) 445-1884 Michele Burgess, NMSS 301415-5868 E-mail: mlb5@nrc.gov
 
Attachments:
/V" g ke 1. INC Retrofit Letter 2. List of Recently Issued NMSS Information
 
Notices 3. List of Recently Issued NRC Information
 
Notices
 
IIN 97-87 December 12, 1997 I s I i i I INDUSTRLAL
 
NUCLEAR CCO K'c.OCTOBER 24, 1§97 SUBJECT; IR- 00 EXPOSURE DEVICE LQCK.DEAR CUSTOMERi ACCORDING
 
TO I 17 CC 30332(C)(1)
AND ANSI N432-19 8 0,5.1.2.1, EACH IOGRkpHIC
 
DEVICE MUAT HAVE A LOCK THAT IS NOT EASILY BMA3 BY UNAUTOIZE
 
PRSONNEL.
 
IN OTHER WORDS ONLY KNOWLED LE OR AUTHORIZED
 
PtRSONNEL
 
SHOULD DISMANTLE THE LOCK ASSE BLY.TO rNSURE THEI ABOVE REGULATION, INC WILL INSTALL A HEAVY DUTY FOI LABL OVER T ALLEN SCREW ON THE LOCK BOX (RIGHT SIDE OLY) TS LABEL WILL STATE "tO BE REMOVED ONLY BY AUTHORIZED
 
PESONNEL.INC WILL INSTALL THE LABELS FREE OF CHARGE ON EVERY DEVICE SHIPPED TO US! FOR RELOADING
 
OR MAIOTAINENCE.
 
IF WE DO NOT RECIEvE YOUR DEVICE WITHIN f'o DAYS !FROM THE ABOVE DATE, WE WILL SEND YOU' THE LABELS FOR YOU TO INSTALL.THANK YOU FOA YOUR CONTINUED
 
SUPPORT. IF YOU HAVE ANY QUESTIONS PLEASE CALL ipic AT 1-800-711-1962.
 
VERY TRULY YOURS.S.A .UDDLE ON '''I., I I I Bh& _ u~ Len. CAW CAMOCE: 14220 Waks w4 (510) as.o.-T^l 0 ^-
"Sclment 2 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED NMSS INFORMATION
 
NOTICES Information
 
Date of Notice No. Subject Issuance Issued to 97-86 97-75 97-72 97-65 97-64 97-61 97-58 97-57 Additional
 
Controls for Transport of the Amersham Model No. 660 Series Radiographic
 
Exposure Devices Enforcement
 
Sanctions
 
===Issued as a Result of Deliberate===
Violations
 
of NRC Requirements
 
Potential
 
for Failure of the Omega Series Sprinkler
 
Heads Failures of High-Dose-
 
===Rate Remote Afterloading===
Device Source Guide Tubes, Catheters, and Applicators
 
Potential
 
Problems Associated
 
with Loss of Electrical
 
===Power in Certain Teletherapy===
Units U.S. Department
 
of Health and Human Services Letter, to Medical Device Manu-facturers, on the Year 2000 Problem Mechanical
 
Integrity
 
of In-Situ Leach Injection Wells and Piping Leak Testing of Packaging Used in the Transport
 
of Radioactive
 
Material 12/12/97 09/24/97 09/22/97 08/15/97 08/13/97 08/06/97 07/31/97 07/30/97 Registered
 
users of the Model No. 660 series packages, and Nuclear Regulatory
 
Commission
 
industrial
 
radiography
 
licensees All U.S. Nuclear Regulatory
 
Commission
 
licensees All holders of OLs or CPs for nuclear power reactors and fuel cycle facilities
 
All high-dose-rate
 
remote afterloader
 
licensees All U.S. Nuclear Regulatory
 
Commission
 
medical tele-therapy licensees All U.S. Nuclear Regulatory
 
Commission
 
medical licensees, veterinarians, and manufacturers/distri- butors of medical devices Holders of and Applicants
 
for Licenses for In-Situ Leach Facilities
 
Suppliers
 
and users of packaging
 
for the trans-portation
 
of radioactive
 
material required to per-form packaging
 
leak tests
 
Attachment
 
3 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED NRC INFORMATION
 
NOTICES Information
 
Date of Notice No. Subject Issuance Issued to 97-86 97-85 97-84 95-49, Sup. 1 97-83 97-82 Additional
 
Controls for Transport
 
of the Amersham Model No. 660 Series Radiographic
 
Exposure Devices Effects of Crud Buildup and Boron Deposition
 
on Power Distribution
 
and Shutdown Margin Rupture in Extraction
 
Steam Piping as a Result of Flow-Accelerated
 
Corrosion Seismic Adequacy of Thermo-Lag
 
Panels Recent Events Involving Reactor Coolant System Inventory
 
Control During Shutdown Inadvertent
 
Control Room Halon Actuation
 
Due to a Camera Flash 12/12/97 12/11/97 12/11/97 12/10/97 12/05/97 11/28/97 Registered
 
users of the Model No. 660 series packages, and Nuclear Regulatory
 
Commission
 
industrial
 
radiography
 
licensees All holders of OLs for pressurized- water reactors, except those licensees
 
who have permanently
 
ceased operations
 
and have certified
 
that the fuel has been permanently
 
removed from the reactor vessel All holders of OLs for nuclear power reactors except those who have permanently
 
ceased operations
 
and have certified that fuel has been permanently
 
removed from the reactor vessel All holders of OLs for nuclear power reactors All holders of OLs for pressurized- water reactors, except those licensees
 
who have permanently
 
ceased operations
 
and have certified
 
that fuel has been permanently
 
removed from the reactor vessel All holders of OLs for nuclear power reactors OL = Operating
 
License CP = Construction
 
Permit
 
J ~IN 9 7-xxK~Novembe;r1997 easily removable
 
by unauthorized
 
personnel.!
To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive
 
metal foil over the screws.The foil and adhesive are such that the foil is difficult
 
to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized
 
personnel from accessing
 
the screws, and to provide a means to alert the licensee to possible tampering
 
of the lock. INC has indicated
 
that it will contact all owners of potentially
 
affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions
 
on retrofitting
 
the devices. Attachment
 
1 contains a copy of the retrofit letter.All affected cameras should be retrofitted
 
as soon as possible.
 
Ucensees should contact INC, or the State of California, to obtain retrofit kits or assistance
 
with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed
 
retrofits during any inspection.
 
This information
 
notice requires no specific action nor written response.
 
If you have any questions
 
about the information
 
in this notice, please contact one of the technical
 
contacts listed below or the appropriate
 
regional office.Donald A. Cool, Director Division of Industrial
 
and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards
 
Technical
 
Contacts: David Wesley Dept. of Health Services State of California
 
(916) 445-1884 Michele Burgess, NMSS (301) 415-5868 E-mail: mlb5@nrc.gov
 
Attachments:
1. INC retrofit letter 2. Lst of Recently Issued NRC Information
 
Notices 3 List of Recently Issued NMSS Information
 
Notices Distribution:
SSSS r/F NE02-SSD-3 KRamsey, IMOB Coordinated
 
with State of California
 
iej DOCUMENT NAME: A:\JR100lN.IN
 
EKraus via fax 10/24197 receive a copy of this document, Indicate In the box: v
 
* Copy wthout at'advemnenedosure
 
v *Copy wlth attadmeenclosure
 
NW No copy NOFFICE IMAB gIMAB i<Im IMA?3 e WMSK D IMi d DC i NAME IMABurgess
 
A nd3aggefB
 
I-CaBer M.icc iM DC%. l DATE 1,2 I Of /97
* I /97 /2/f1 /97 ho1J /97 '// 7 OFFICIAL RECORD COPY
 
IN 97-.?November\wpr
 
97 easily removable
 
by unauthorized
 
personnel." To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive
 
metal foil over the screws.The foil and adhesive are such that the foil is difficult
 
to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized
 
personnel from accessing
 
the screws, and to provide a means to alert the licensee to possible tampering
 
of the lock. INC has indicated
 
that it will contact all owners of potentially
 
affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions
 
on retrofitting
 
the devices. Attachment
 
1 contains a copy of the retrofit letter.All affected cameras should be retrofitted
 
as soon as possible.
 
Licensees
 
should contact INC, or the State of California, to obtain retrofit kits or assistance
 
with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed
 
retrofits during any inspection.
 
This information
 
notice requires no specific action nor written response.
 
If you have any questions
 
about the information
 
in this notice, please contact one of the technical
 
contacts listed below or the appropriate
 
regional office.Donald A. Cool, Director Division of Industrial
 
and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards
 
Technical
 
Contacts:
David Wesley Dept. of Health Services State of California
 
(916) 445-1884 Michele Burgess, NMSS (301) 415-5868 E-mail: mlb5@nrc.gov
 
Attachments:
1. INC retrofit letter 2. List of Recently Issued NRC Information


==Description of Circumstances==
Notices 3. List of Recently Issued NMSS Information
The recent retrofit to the safety latch plate (NRC Information Notice 97-35, dated June 18,1997), which corrected a scenario where the INC Model IR100 radiography camera would notpass the horizontal shock test, as required by 10 CFR 34.20, resulted in the equipment notmeeting the requirement that the lock should not be easily removed by unauthorized personnel.INC and the State of California evaluated the problem, and INC took action to correct thesituation.DiscusionThe "Safety Latch Plate" on the IR100 radiography camera has a potentially more "fragile areas(as specified in ANSI N432-1980, Paragraph 8.3.2) than the area previously tested.Apparently, if the Safety Latch Plate was struck directly on the front surface of the plate (withthe source in the safe locked position), the plate could be deformed and deemed inoperable. Italso appeared that the plate might be susceptible to damage if struck from the top and side. Toensure that this type of potential damage was not possible, a bumper that would prevent9&#xa2; ho ROTOR- q1og 0 rlal_ asd 64thaf %9120901 1i'.1 b ([12 -f /,c


IN 97-87December 12,1997 deformation was welded to the back of the Safety Latch Plate, and the outer top edge of the platewas angled at a 45-to-50-degree angle, to a depth of approximately 3 mm (0.12 inch). Themodified device was tested to ensure compliance with ANSI N432-1980, paragraph 8.2.In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to thedevice were such that they were easily removed by the user. This is contrary to requirements in10 CFR 34.20(a) which states that all devices in use meet the requirements of ANSI N432-1980.ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is noteasily removable by unauthorized personnel." To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tamperinq ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment I contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.\.9Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical contacts: David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS301415-5868E-mail: mlb5@nrc.govAttachments: /V" g ke1. INC Retrofit Letter2. List of Recently Issued NMSS Information Notices3. List of Recently Issued NRC Information Notices
Notices Distribution:
SSSS rH NE02-SSD-3 KRamsey, IMOB Coordinated


IIN 97-87December 12, 1997 IsIiiIINDUSTRLAL NUCLEAR CCO K'c.OCTOBER 24, 1&sect;97SUBJECT; IR- 00 EXPOSURE DEVICE LQCK.DEAR CUSTOMERiACCORDING TO I 17 CC 30332(C)(1) AND ANSI N432-1980,5.1.2.1, EACH IOGRkpHIC DEVICE MUAT HAVE A LOCK THAT IS NOTEASILY BMA3 BY UNAUTOIZE PRSONNEL. IN OTHER WORDSONLY KNOWLED LE OR AUTHORIZED PtRSONNEL SHOULD DISMANTLETHE LOCK ASSE BLY.TO rNSURE THEI ABOVE REGULATION, INC WILL INSTALL A HEAVYDUTY FOI LABL OVER T ALLEN SCREW ON THE LOCK BOX (RIGHTSIDE OLY) TS LABEL WILL STATE "tO BE REMOVED ONLY BYAUTHORIZED PESONNEL.INC WILL INSTALL THE LABELS FREE OF CHARGE ON EVERY DEVICESHIPPED TO US! FOR RELOADING OR MAIOTAINENCE. IF WE DO NOTRECIEvE YOUR DEVICE WITHIN f'o DAYS !FROM THE ABOVE DATE, WEWILL SEND YOU' THE LABELS FOR YOU TO INSTALL.THANK YOU FOA YOUR CONTINUED SUPPORT. IF YOU HAVE ANY QUESTIONSPLEASE CALL ipic AT 1-800-711-1962.VERY TRULY YOURS.S.A .UDDLE ON '''I., II IBh& _ u~ Len. CAWCAMOCE:14220 Waksw4 (510) as.o.-T^l 0 ^-
with State of California
"Sclment 2IN 97-87December 12, 1997 LIST OF RECENTLY ISSUEDNMSS INFORMATION NOTICESInformation Date ofNotice No. Subject Issuance Issued to97-8697-7597-7297-6597-6497-6197-5897-57Additional Controls for Transportof the Amersham Model No. 660Series Radiographic ExposureDevicesEnforcement Sanctions Issuedas a Result of DeliberateViolations of NRC RequirementsPotential for Failureof the Omega SeriesSprinkler HeadsFailures of High-Dose-Rate Remote AfterloadingDevice Source Guide Tubes,Catheters, and ApplicatorsPotential ProblemsAssociated with Lossof Electrical Powerin Certain TeletherapyUnitsU.S. Department ofHealth and HumanServices Letter, toMedical Device Manu-facturers, on theYear 2000 ProblemMechanical Integrity ofIn-Situ Leach InjectionWells and PipingLeak Testing of PackagingUsed in the Transport ofRadioactive Material12/12/9709/24/9709/22/9708/15/9708/13/9708/06/9707/31/9707/30/97Registered users of the ModelNo. 660 series packages, andNuclear Regulatory Commissionindustrial radiography licenseesAll U.S. Nuclear RegulatoryCommission licenseesAll holders of OLs or CPsfor nuclear power reactorsand fuel cycle facilitiesAll high-dose-rate remoteafterloader licenseesAll U.S. Nuclear RegulatoryCommission medical tele-therapy licenseesAll U.S. Nuclear RegulatoryCommission medicallicensees, veterinarians,and manufacturers/distri-butors of medical devicesHolders of and Applicantsfor Licenses for In-SituLeach FacilitiesSuppliers and users ofpackaging for the trans-portation of radioactivematerial required to per-form packaging leak tests


Attachment 3IN 97-87December 12, 1997 LIST OF RECENTLY ISSUEDNRC INFORMATION NOTICESInformation Date ofNotice No. Subject Issuance Issued to97-8697-8597-8495-49,Sup. 197-8397-82Additional Controls forTransport of the AmershamModel No. 660 SeriesRadiographic Exposure DevicesEffects of Crud Buildupand Boron Deposition onPower Distribution andShutdown MarginRupture in ExtractionSteam Piping as aResult of Flow-AcceleratedCorrosionSeismic Adequacy ofThermo-Lag PanelsRecent Events InvolvingReactor Coolant SystemInventory Control DuringShutdownInadvertent Control RoomHalon Actuation Due to aCamera Flash12/12/9712/11/9712/11/9712/10/9712/05/9711/28/97Registered users of the ModelNo. 660 series packages, andNuclear Regulatory Commissionindustrial radiography licenseesAll holders of OLs for pressurized-water reactors, except thoselicensees who have permanentlyceased operations and havecertified that the fuel has beenpermanently removed from thereactor vesselAll holders of OLs for nuclearpower reactors except thosewho have permanently ceasedoperations and have certifiedthat fuel has been permanentlyremoved from the reactor vesselAll holders of OLs for nuclearpower reactorsAll holders of OLs for pressurized-water reactors, except thoselicensees who have permanentlyceased operations and havecertified that fuel has beenpermanently removed from thereactor vesselAll holders of OLs for nuclearpower reactorsOL = Operating LicenseCP = Construction Permit
PX-a DOCUMENT NAME: A:iR100N.IN


J ~IN 97-xxK~Novembe;r1997 easily removable by unauthorized personnel.! To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tampering ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Ucensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical Contacts:David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS(301) 415-5868E-mail: mlb5@nrc.govAttachments:1. INC retrofit letter2. Lst of Recently Issued NRC Information Notices3 List of Recently Issued NMSS Information NoticesDistribution:SSSS r/F NE02-SSD-3 KRamsey, IMOBCoordinated with State of California iejDOCUMENT NAME: A:\JR100lN.IN EKraus via fax 10/24197receive a copy of this document, Indicate In the box: v
EKraus via fax 10124197 To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"
* Copy with atachment/endosure


* Copy wthout at'advemnenedosure v *Copy wlth attadmeenclosure NW No copyNOFFICE IMAB gIMAB i<Im IMA?3 e WMSK D IMi d DCi NAME IMABurgess A nd3aggefB I-CaBer M.icc iM DC%. lDATE 1,2 I Of /97
AND m No copyl OFFICE IMAB m IMAB I IMAB 'n0- 1 IMORt\ IMPS W 14% L NAME MMBurgesslmb
* I /97 /2/f1 /97 ho1J /97 '// 7OFFICIAL RECORD COPY


IN 97-.?November\wpr 97 easily removable by unauthorized personnel." To correct this situation, INC has modified thedevice design to secure the lock screws by placing a self-adhesive metal foil over the screws.The foil and adhesive are such that the foil is difficult to remove and cannot be removed andreplaced without showing signs of damage. The foil will serve to inhibit unauthorized personnelfrom accessing the screws, and to provide a means to alert the licensee to possible tampering ofthe lock. INC has indicated that it will contact all owners of potentially affected cameras, onrecord with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide themwith the foil covers and instructions on retrofitting the devices. Attachment 1 contains a copy ofthe retrofit letter.All affected cameras should be retrofitted as soon as possible. Licensees should contact INC, orthe State of California, to obtain retrofit kits or assistance with retrofit procedures, or to report thatthey have not received their kits. Affected cameras may be checked for completed retrofitsduring any inspection.This information notice requires no specific action nor written response. If you have anyquestions about the information in this notice, please contact one of the technical contacts listedbelow or the appropriate regional office.Donald A. Cool, DirectorDivision of Industrial andMedical Nuclear SafetyOffice of Nuclear Material Safetyand SafeguardsTechnical Contacts: David WesleyDept. of Health ServicesState of California(916) 445-1884Michele Burgess, NMSS(301) 415-5868E-mail: mlb5@nrc.govAttachments:1. INC retrofit letter2. List of Recently Issued NRC Information Notices3. List of Recently Issued NMSS Information NoticesDistribution:SSSS rH NE02-SSD-3 KRamsey, IMOBCoordinated with State of California PX-aDOCUMENT NAME: A:iR100N.IN EKraus via fax 10124197To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"
1SBaggett
* Copy with atachment/endosure AND m No copyl OFFICE IMAB m IMAB I IMAB 'n0- 1 IMORt\ IMPS W 14% LNAME MMBurgesslmb 1SBaggett LCamper IJPiqw 1DC4 //DATE /,2 / Oe /97 7 Y 7 /97 12f 9 1- /97 I-i/ r-\47OFFICIAL RECORD COPY


}}
LCamper IJPiqw 1DC4 //DATE /,2 / Oe /97 7 Y 7 /97 12f 9 1- /97 I-i/ r-\47 OFFICIAL RECORD COPY}}


{{Information notice-Nav}}
{{Information notice-Nav}}

Revision as of 14:12, 31 August 2018

Second Retrofit to Industrial Nuclear Company IR100 Radiography Camera, to Correct Inconsistency in 10 CFR Part 34 Compatibility
ML031050023
Person / Time
Site: Beaver Valley, Millstone, Hatch, Monticello, Calvert Cliffs, Dresden, Davis Besse, Peach Bottom, Browns Ferry, Salem, Oconee, Mcguire, Nine Mile Point, Palisades, Palo Verde, Perry, Indian Point, Fermi, Kewaunee, Catawba, Harris, Wolf Creek, Saint Lucie, Point Beach, Oyster Creek, Watts Bar, Hope Creek, Grand Gulf, Cooper, Sequoyah, Byron, Pilgrim, Arkansas Nuclear, Three Mile Island, Braidwood, Susquehanna, Summer, Prairie Island, Columbia, Seabrook, Brunswick, Surry, Limerick, North Anna, Turkey Point, River Bend, Vermont Yankee, Crystal River, Haddam Neck, Ginna, Diablo Canyon, Callaway, Vogtle, Waterford, Duane Arnold, Farley, Robinson, Clinton, South Texas, San Onofre, Cook, Comanche Peak, Yankee Rowe, Maine Yankee, Quad Cities, Humboldt Bay, La Crosse, Big Rock Point, Rancho Seco, Zion, Midland, Bellefonte, Fort Calhoun, FitzPatrick, McGuire, LaSalle, Fort Saint Vrain, Shoreham, Satsop, Trojan, Atlantic Nuclear Power Plant  Entergy icon.png
Issue date: 12/12/1997
From: Cool D A
NRC/NMSS/IMNS
To:
References
IN-97-087, NUDOCS 9712090210
Download: ML031050023 (7)


UNITED STATES NUCLEAR REGULATORY

COMMISSION

OFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDS

WASHINGTON, DC 20555 December 12, 1997 NRC INFORMATION

NOTICE 97-87: SECOND RETROFIT TO INDUSTRIAL

NUCLEAR COMPANY IRiOO RADIOGRAPHY

CAMERA, TO CORRECT INCONSISTENCY

IN 10 CFR PART 34 COMPATIBILITY

Addressees

All industrial

radiography

licensees.

PuMrose The U.S. Nuclear Regulatory

Commission (NRC) is issuing this information

notice to make licensees

aware of a retrofit to the lock of the Industrial

Nuclear Company (INC) Model IR100 Radiography

Camera, to correct an inconsistency

in 10 CFR Part 34 compatibility.

It is expected that recipients

will review the information

for applicability

to their licensed activities, and consider actions, as appropriate, to avoid problems.

However, suggestions

contained

in this information

notice are not NRC requirements;

therefore, no specific action nor written response is required.Description

of Circumstances

The recent retrofit to the safety latch plate (NRC Information

Notice 97-35, dated June 18, 1997), which corrected

a scenario where the INC Model IR100 radiography

camera would not pass the horizontal

shock test, as required by 10 CFR 34.20, resulted in the equipment

not meeting the requirement

that the lock should not be easily removed by unauthorized

personnel.

INC and the State of California

evaluated

the problem, and INC took action to correct the situation.

Discusion The "Safety Latch Plate" on the IR100 radiography

camera has a potentially

more "fragile areas (as specified

in ANSI N432-1980, Paragraph

8.3.2) than the area previously

tested.Apparently, if the Safety Latch Plate was struck directly on the front surface of the plate (with the source in the safe locked position), the plate could be deformed and deemed inoperable.

It also appeared that the plate might be susceptible

to damage if struck from the top and side. To ensure that this type of potential

damage was not possible, a bumper that would prevent 9¢ ho ROTOR- q1og 0 rlal_ asd 64thaf %9120901 1i'.1 b ([12 -f /,c

IN 97-87 December 12,1997 deformation

was welded to the back of the Safety Latch Plate, and the outer top edge of the plate was angled at a 45-to-50-degree

angle, to a depth of approximately

3 mm (0.12 inch). The modified device was tested to ensure compliance

with ANSI N432-1980, paragraph

8.2.In the Safety Latch plate retrofit to the IR1 00, the Allen screws used to fasten the plate to the device were such that they were easily removed by the user. This is contrary to requirements

in 10 CFR 34.20(a) which states that all devices in use meet the requirements

of ANSI N432-1980.

ANSI N432, Section 5.1.2.1, requires that 0(t]he exposure device shall have a lock which is not easily removable

by unauthorized

personnel." To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive

metal foil over the screws.The foil and adhesive are such that the foil is difficult

to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized

personnel from accessing

the screws, and to provide a means to alert the licensee to possible tamperinq

of the lock. INC has indicated

that it will contact all owners of potentially

affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions

on retrofitting

the devices. Attachment

I contains a copy of the retrofit letter.All affected cameras should be retrofitted

as soon as possible.

Licensees

should contact INC, or the State of California, to obtain retrofit kits or assistance

with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed

retrofits during any inspection.

This information

notice requires no specific action nor written response.

If you have any questions

about the information

in this notice, please contact one of the technical

contacts listed below or the appropriate

regional office.\.9 Donald A. Cool, Director Division of Industrial

and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards

Technical

contacts:

David Wesley Dept. of Health Services State of California

(916) 445-1884 Michele Burgess, NMSS 301415-5868 E-mail: mlb5@nrc.gov

Attachments:

/V" g ke 1. INC Retrofit Letter 2. List of Recently Issued NMSS Information

Notices 3. List of Recently Issued NRC Information

Notices

IIN 97-87 December 12, 1997 I s I i i I INDUSTRLAL

NUCLEAR CCO K'c.OCTOBER 24, 1§97 SUBJECT; IR- 00 EXPOSURE DEVICE LQCK.DEAR CUSTOMERi ACCORDING

TO I 17 CC 30332(C)(1)

AND ANSI N432-19 8 0,5.1.2.1, EACH IOGRkpHIC

DEVICE MUAT HAVE A LOCK THAT IS NOT EASILY BMA3 BY UNAUTOIZE

PRSONNEL.

IN OTHER WORDS ONLY KNOWLED LE OR AUTHORIZED

PtRSONNEL

SHOULD DISMANTLE THE LOCK ASSE BLY.TO rNSURE THEI ABOVE REGULATION, INC WILL INSTALL A HEAVY DUTY FOI LABL OVER T ALLEN SCREW ON THE LOCK BOX (RIGHT SIDE OLY) TS LABEL WILL STATE "tO BE REMOVED ONLY BY AUTHORIZED

PESONNEL.INC WILL INSTALL THE LABELS FREE OF CHARGE ON EVERY DEVICE SHIPPED TO US! FOR RELOADING

OR MAIOTAINENCE.

IF WE DO NOT RECIEvE YOUR DEVICE WITHIN f'o DAYS !FROM THE ABOVE DATE, WE WILL SEND YOU' THE LABELS FOR YOU TO INSTALL.THANK YOU FOA YOUR CONTINUED

SUPPORT. IF YOU HAVE ANY QUESTIONS PLEASE CALL ipic AT 1-800-711-1962.

VERY TRULY YOURS.S.A .UDDLE ON I., I I I Bh& _ u~ Len. CAW CAMOCE: 14220 Waks w4 (510) as.o.-T^l 0 ^-

"Sclment 2 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED NMSS INFORMATION

NOTICES Information

Date of Notice No. Subject Issuance Issued to 97-86 97-75 97-72 97-65 97-64 97-61 97-58 97-57 Additional

Controls for Transport of the Amersham Model No. 660 Series Radiographic

Exposure Devices Enforcement

Sanctions

Issued as a Result of Deliberate

Violations

of NRC Requirements

Potential

for Failure of the Omega Series Sprinkler

Heads Failures of High-Dose-

Rate Remote Afterloading

Device Source Guide Tubes, Catheters, and Applicators

Potential

Problems Associated

with Loss of Electrical

Power in Certain Teletherapy

Units U.S. Department

of Health and Human Services Letter, to Medical Device Manu-facturers, on the Year 2000 Problem Mechanical

Integrity

of In-Situ Leach Injection Wells and Piping Leak Testing of Packaging Used in the Transport

of Radioactive

Material 12/12/97 09/24/97 09/22/97 08/15/97 08/13/97 08/06/97 07/31/97 07/30/97 Registered

users of the Model No. 660 series packages, and Nuclear Regulatory

Commission

industrial

radiography

licensees All U.S. Nuclear Regulatory

Commission

licensees All holders of OLs or CPs for nuclear power reactors and fuel cycle facilities

All high-dose-rate

remote afterloader

licensees All U.S. Nuclear Regulatory

Commission

medical tele-therapy licensees All U.S. Nuclear Regulatory

Commission

medical licensees, veterinarians, and manufacturers/distri- butors of medical devices Holders of and Applicants

for Licenses for In-Situ Leach Facilities

Suppliers

and users of packaging

for the trans-portation

of radioactive

material required to per-form packaging

leak tests

Attachment

3 IN 97-87 December 12, 1997 LIST OF RECENTLY ISSUED NRC INFORMATION

NOTICES Information

Date of Notice No. Subject Issuance Issued to 97-86 97-85 97-84 95-49, Sup. 1 97-83 97-82 Additional

Controls for Transport

of the Amersham Model No. 660 Series Radiographic

Exposure Devices Effects of Crud Buildup and Boron Deposition

on Power Distribution

and Shutdown Margin Rupture in Extraction

Steam Piping as a Result of Flow-Accelerated

Corrosion Seismic Adequacy of Thermo-Lag

Panels Recent Events Involving Reactor Coolant System Inventory

Control During Shutdown Inadvertent

Control Room Halon Actuation

Due to a Camera Flash 12/12/97 12/11/97 12/11/97 12/10/97 12/05/97 11/28/97 Registered

users of the Model No. 660 series packages, and Nuclear Regulatory

Commission

industrial

radiography

licensees All holders of OLs for pressurized- water reactors, except those licensees

who have permanently

ceased operations

and have certified

that the fuel has been permanently

removed from the reactor vessel All holders of OLs for nuclear power reactors except those who have permanently

ceased operations

and have certified that fuel has been permanently

removed from the reactor vessel All holders of OLs for nuclear power reactors All holders of OLs for pressurized- water reactors, except those licensees

who have permanently

ceased operations

and have certified

that fuel has been permanently

removed from the reactor vessel All holders of OLs for nuclear power reactors OL = Operating

License CP = Construction

Permit

J ~IN 9 7-xxK~Novembe;r1997 easily removable

by unauthorized

personnel.!

To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive

metal foil over the screws.The foil and adhesive are such that the foil is difficult

to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized

personnel from accessing

the screws, and to provide a means to alert the licensee to possible tampering

of the lock. INC has indicated

that it will contact all owners of potentially

affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions

on retrofitting

the devices. Attachment

1 contains a copy of the retrofit letter.All affected cameras should be retrofitted

as soon as possible.

Ucensees should contact INC, or the State of California, to obtain retrofit kits or assistance

with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed

retrofits during any inspection.

This information

notice requires no specific action nor written response.

If you have any questions

about the information

in this notice, please contact one of the technical

contacts listed below or the appropriate

regional office.Donald A. Cool, Director Division of Industrial

and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards

Technical

Contacts: David Wesley Dept. of Health Services State of California

(916) 445-1884 Michele Burgess, NMSS (301) 415-5868 E-mail: mlb5@nrc.gov

Attachments:

1. INC retrofit letter 2. Lst of Recently Issued NRC Information

Notices 3 List of Recently Issued NMSS Information

Notices Distribution:

SSSS r/F NE02-SSD-3 KRamsey, IMOB Coordinated

with State of California

iej DOCUMENT NAME: A:\JR100lN.IN

EKraus via fax 10/24197 receive a copy of this document, Indicate In the box: v

  • Copy wthout at'advemnenedosure

v *Copy wlth attadmeenclosure

NW No copy NOFFICE IMAB gIMAB i<Im IMA?3 e WMSK D IMi d DC i NAME IMABurgess

A nd3aggefB

I-CaBer M.icc iM DC%. l DATE 1,2 I Of /97

  • I /97 /2/f1 /97 ho1J /97 '// 7 OFFICIAL RECORD COPY

IN 97-.?November\wpr

97 easily removable

by unauthorized

personnel." To correct this situation, INC has modified the device design to secure the lock screws by placing a self-adhesive

metal foil over the screws.The foil and adhesive are such that the foil is difficult

to remove and cannot be removed and replaced without showing signs of damage. The foil will serve to inhibit unauthorized

personnel from accessing

the screws, and to provide a means to alert the licensee to possible tampering

of the lock. INC has indicated

that it will contact all owners of potentially

affected cameras, on record with it, to notify them of the retrofit, and to retrofit the cameras for them or to provide them with the foil covers and instructions

on retrofitting

the devices. Attachment

1 contains a copy of the retrofit letter.All affected cameras should be retrofitted

as soon as possible.

Licensees

should contact INC, or the State of California, to obtain retrofit kits or assistance

with retrofit procedures, or to report that they have not received their kits. Affected cameras may be checked for completed

retrofits during any inspection.

This information

notice requires no specific action nor written response.

If you have any questions

about the information

in this notice, please contact one of the technical

contacts listed below or the appropriate

regional office.Donald A. Cool, Director Division of Industrial

and Medical Nuclear Safety Office of Nuclear Material Safety and Safeguards

Technical

Contacts:

David Wesley Dept. of Health Services State of California

(916) 445-1884 Michele Burgess, NMSS (301) 415-5868 E-mail: mlb5@nrc.gov

Attachments:

1. INC retrofit letter 2. List of Recently Issued NRC Information

Notices 3. List of Recently Issued NMSS Information

Notices Distribution:

SSSS rH NE02-SSD-3 KRamsey, IMOB Coordinated

with State of California

PX-a DOCUMENT NAME: A:iR100N.IN

EKraus via fax 10124197 To recelve a copy of this document, Indicate I the box: 'C" a Copy w thout attachmentenclosure "E"

  • Copy with atachment/endosure

AND m No copyl OFFICE IMAB m IMAB I IMAB 'n0- 1 IMORt\ IMPS W 14% L NAME MMBurgesslmb

1SBaggett

LCamper IJPiqw 1DC4 //DATE /,2 / Oe /97 7 Y 7 /97 12f 9 1- /97 I-i/ r-\47 OFFICIAL RECORD COPY