Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Title" with value "Proposed Tech Spec 4.7 Re Emergency Power Sys Periodic Tests". Since there have been only a few results, also nearby values are displayed.

⧼showingresults⧽

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • ML19339B121  + (Proposed Tech Spec 4.4.6.2.2,requiring Leak Testing of Pressure Isolation Valves Prior to Entering Mode 2)
  • ML20077Q686  + (Proposed Tech Spec 4.4.D.1,which Changes Interval for Performance RHR Sys Leakage Test from Once Every 12 Months to Perform Test During Each Refueling Shutdown)
  • ML18057A428  + (Proposed Tech Spec 4.5.1 Re Integrated Leakage Rate Tests)
  • ML20055J193  + (Proposed Tech Spec 4.5.2 Re ECCS Subsystems,Modes 1,2 & 3)
  • ML20012C573  + (Proposed Tech Spec 4.5.2,modifying Existing Surveillance Requirements for Venting of ECCS Equipment & Reducing Significant Exposure to Radiation in Accordance W/Alara Guidelines W/O Reducing Safe Operation of ECCS Equipment)
  • ML20215N628  + (Proposed Tech Spec 4.5.2.b.4,increasing Allowable Open Time for LPSI Min Recirculation Line Valve CS-MOV-532 to 120 Minutes Per Wk)
  • ML20086P211  + (Proposed Tech Spec 4.5.2.h Re ECCS)
  • ML20076D517  + (Proposed Tech Spec 4.5.6.2.b Re Deletion of Autoclosure Interlock on RHR Suction Valves)
  • ML20236Y377  + (Proposed Tech Spec 4.6.1.2c.3,Section 3/4.6.1.2 Re Containment Sys & Containment Leakage)
  • ML20004F377  + (Proposed Tech Spec 4.6.1.5 for Air Temp)
  • ML20065K583  + (Proposed Tech Spec 4.6.1.6.1,changing Wording Re Containment Structural Integrity Surveillance)
  • ML20106F947  + (Proposed Tech Spec 4.6.1.6.1,extending Period for Completion of Containment Vessel Tendon Surveillance by 6 Months)
  • ML17219A386  + (Proposed Tech Spec 4.6.1.7.4 Requiring That Continuous Containment Purge Supply & Exhaust Isolation Valves Be Determined Operable Every 92 Days)
  • ML18051B363  + (Proposed Tech Spec 4.6.1.d,providing Verification That at Least One Shutdown Cooling Pump & One HX in Operation at Least Once Per 12 H During Refueling)
  • ML20215J630  + (Proposed Tech Spec 4.6.2.1.f,extending Testing Interval of MSIVs in Steam Line a Until 870712,on one-time-only Basis)
  • ML20086A488  + (Proposed Tech Spec 4.6.2.1b Re Containment Spray Sys Performance Criteria)
  • ML20211B870  + (Proposed Tech Spec 4.6.2.2.d,changing Containment Spray Sys Spray Additive Tank Flow Rate Surveillance Test Requirements)
  • ML20101S518  + (Proposed Tech Spec 4.6.2.2.e,ensuring Adequate Piping Capacity to Deliver Required Sodium Hydroxide to Containment Spray Line)
  • ML20211D622  + (Proposed Tech Spec 4.6.2.3 Re Surveillance Requirements for Containment Sys Concerning Drywell Air Lock)
  • ML18038A624  + (Proposed Tech Spec 4.6.2a Re Instrumentation Initiating Scram)
  • ML19312B998  + (Proposed Tech Spec 4.6.3 Re Annual Performance of Simulated Emergency Transfer of 4160 Volt Main Feeder Buses to Startup Transformer & to 4160 Volt Standby Buses)
  • ML20080L794  + (Proposed Tech Spec 4.6.4.1.b & Table 3.3-9 Re Hydrogen Analyzer Calibr & Remote Shutdown Panel Instrumentation, Respectively)
  • ML20079B003  + (Proposed Tech Spec 4.6.4.2.b.4 Re Hydrogen Recombiners)
  • ML17289A405  + (Proposed Tech Spec 4.6.6.1.b.3 Re Primary Containment Atmosphere Control)
  • B11984, Proposed Tech Spec 4.6.E.5,clarifying Functional Testing Requirements for Safety/Relief Valve Position Indication Sys  + (Proposed Tech Spec 4.6.E.5,clarifying Functional Testing Requirements for Safety/Relief Valve Position Indication Sys)
  • ML18047A381  + (Proposed Tech Spec 4.7 Re Emergency Power Sys Periodic Tests)
  • ML20038B004  + (Proposed Tech Spec 4.7 Revision Re Primary Containment Airlock Test Requirements.Safety Evaluation Encl)
  • ML20052A592  + (Proposed Tech Spec 4.7,plant Sys)
  • ML18051B494  + (Proposed Tech Spec 4.7.1(c),revising Surveillance Frequency for Diesel Generators to Once Per Refueling Cycle)
  • ML20063L694  + (Proposed Tech Spec 4.7.1.2.1.a,requiring Turbine & Motor Driven Pumps Be Tested Quarterly on Staggered Test Basis)
  • ML20095D578  + (Proposed Tech Spec 4.7.1.2.2.b.1,deleting Words During Shutdown)
  • ML20045C344  + (Proposed Tech Spec 4.7.1.2.a.2 Supporting Request to Perform Turbine Driven Pump Surveillance Test at Secondary Steam Pressure Greater than or Equal to 865 Psig)
  • ML18095A733  + (Proposed Tech Spec 4.7.1.5 & Table 2.2-5 Allowing Continued Use of 8 MSIV Stroke Time During 10th Fuel Cycle)
  • ML20096A353  + (Proposed Tech Spec 4.7.10.b Re Snubber Visual Insp)
  • ML18051B394  + (Proposed Tech Spec 4.7.2 Change,Revising Frequency of Periodic Station Battery Svc & Discharge Tests from 18- & 60-month Intervals,Respectively,Per SEP Topic VIII-3.A, Station Battery Capacity Test Requirements)
  • ML17348A967  + (Proposed Tech Spec 4.7.2 Re Component Cooling Water Sys Surveillance Requirements)
  • ML20062K424  + (Proposed Tech Spec 4.7.3.c.2 & Bases 3/4.7.3,revising 18-month Surveillance Requirements to Account for Flow Differences Between Test Flow Path & Normal Flow Path)
  • ML20091N907  + (Proposed Tech Spec 4.7.5-1 Re Snubber Visual Insp Interval)
  • ML20245J696  + (Proposed Tech Spec 4.7.5.b,revising Surveillance Requirements on One Time Basis by Establishing Next Visual Insp Interval for Hydraulic Snubbers as 18 Months +/-25%)
  • ML20234D759  + (Proposed Tech Spec 4.7.6 Changing Control Room Area Ventilation Sys Surveillance Requirements to Extend Carbon Adsorber Sampling Frequency from 720 H to 1,440 H)
  • ML20043G256  + (Proposed Tech Spec 4.7.6 Re Control Room Area Ventilation Sys)
  • ML20077Q505  + (Proposed Tech Spec 4.7.6 Re Min Allowed Flow Through Cravs Filter Unit)
  • B12820, Proposed Tech Spec 4.7.6.1.e.3 Re Test Method for Control Room Air in-leakage  + (Proposed Tech Spec 4.7.6.1.e.3 Re Test Method for Control Room Air in-leakage)
  • ML20034B858  + (Proposed Tech Spec 4.7.7,requiring That Lab Test of Carbon Samples from Auxiliary Bldg Filtered Exhaust Sys Be Tested at 95% Relative Humidity & 30 C,For Methyl Iodide Penetration of 0.71%)
  • ML18094A410  + (Proposed Tech Spec 4.7.9.e.1,deleting Requirement That Measured Drag Force of Mechanical Snubber Should Not Increase by More than 50% from Previous Test Result)
  • JPN-93-044, Proposed Tech Spec 4.7.A.2.f Re Containment Leak Rate Testing  + (Proposed Tech Spec 4.7.A.2.f Re Containment Leak Rate Testing)
  • ML20029C025  + (Proposed Tech Spec 4.8.1.1.2 Reflecting Extension of Diesel Generator Surveillance Interval Until 911031)
  • ML20198B938  + (Proposed Tech Spec 4.8.1.1.2.D.1 Re one-time Extension of Surveillance Interval for Diesel Generators)
  • ST-HL-AE-2362, Proposed Tech Spec 4.8.1.1.2.a.2 Correcting Min Rpm Speed Requirement for Diesel Generator & Changing Frequency Requirements to Be Consistent W/Min Rpm Requirement  + (Proposed Tech Spec 4.8.1.1.2.a.2 Correcting Min Rpm Speed Requirement for Diesel Generator & Changing Frequency Requirements to Be Consistent W/Min Rpm Requirement)
  • ML20082R696  + (Proposed Tech Spec 4.8.1.1.2.d.1,allowing Removal of Dedicated Class 1E Emergency Power Source from Shutdown Unit for Seven Days)
  • ML20096A401  + (Proposed Tech Spec 4.8.1.1.2.e Re DG 18-month Surveillance Mode Restrictions)
Retrieved from "https://kanterella.com/Special:SearchByProperty/:Title/Proposed-20Tech-20Spec-204.7-20Re-20Emergency-20Power-20Sys-20Periodic-20Tests"