Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML18025A102 +
- ML19326C501 +
- NRC Generic Letter 78-16, Request for Information on Control of Heavy Loads Near Spent Fuel Pools +
- ML19326B269 +
- ML19210A708 +
- ML19210A707 +
- ML19208B845 +
- ML19208B843 +
- ML19029A666 +
- ML19261F209 +
- ML20136F016 +
- ML20136C699 +
- ML20125B469 +
- ML20214G928 +
- ML20260B606 +
- ML20062A473 +
- ML20024B614 +
- ML19338B853 +
- ML20024B302 +
- ML20024C493 +
- ML19329F171 +
- ML19329E470 +
- IR 05000313/1978009 +
- ML19326B309 +
- ML19326C109 +
- ML19320A423 +
- ML19319A659 +
- IR 05000312/1978004 +
- 05000289/LER-1978-015-01, /01T-0:on 780502,during Initial Cycle 4 Startup, Control Rods Found Positioned in Restricted Region Per Tech Specs 3.5 for 9-h.Caused by Use of Incorrect Rod Index Limit Curve in Procedure.Documentation Procedures Revised +
- ML19309A172 +
- 05000316/LER-1978-026-11, /01T-0:on 780502,during Change from Mode 5 to Mode 4,pumps Became Inoperable When Containment Spray Pump Control Switches in Pull Were in Lockout Position.Caused by Procedural Inadequacy & Personnel Error +
- 05000316/LER-2078-027-03, Letter Licensee Event Report +
- 05000316/LER-2078-026, Letter Licensee Event Report of Containment Spray Pump Switches Not in Automatic Standby Position as Required by Technical Specification 3.6.2.1 +
- ML19317F739 +
- ML19317G264 +
- ML19309A360 +
- ML19309A184 +
- ML20024B315 +