Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML20076K753 + (ML20076K753)
- ML20076K754 + (ML20076K754)
- ML20076K755 + (ML20076K755)
- ML20076K756 + (ML20076K756)
- ML20076K757 + (ML20076K757)
- ML20076K759 + (ML20076K759)
- ML20076K760 + (ML20076K760)
- ML20076K761 + (ML20076K761)
- ML20076K762 + (ML20076K762)
- ML20076K763 + (ML20076K763)
- 0CAN078305, Advises That Util Will Cease Further Expedited Efforts to Provide Schedule Per Request for Exemption from App R Re Barrier & Suppression/Detection Sys & NRC ,Pending Receipt of Addl NRC Clarification + (ML20076K766)
- ML20076K767 + (ML20076K767)
- ML20076K768 + (ML20076K768)
- ML20076K769 + (ML20076K769)
- ML20076K770 + (ML20076K770)
- 05000282/LER-1994-008-01, :on 940926,inoperability of Continuous Air Monitor When Power Supply Was Tripped W/O CR Knowledge. Power Supply Reset + (ML20076K771)
- ML20076K772 + (ML20076K772)
- GO2-83-610, Interim Deficiency Rept Re Reportable Condition 264, Concerning Improperly Sized Overcurrent Devices.Initially Reported on 830609.Pump & Valve Operator Motor Fuses Replaced.Fuse Size Verified.Next Rept by 831003 + (ML20076K774)
- JPN-94-055, Forwards Proprietary Vols 1,2 & 3 of Rev 0 to MPR-1560, Ja FitzPatrick Nuclear Plant Core Shroud Repair - Design Rept. Proprietary Rept Withheld (Ref 10CFR2.790) + (ML20076K775)
- ML20076K776 + (ML20076K776)
- ML20076K777 + (ML20076K777)
- 05000331/LER-1983-029-03, /03L-0:on 830809,during Normal Operations,Both Doors of Reactor Bldg Airlock Found Open Simultaneously. Caused by Blown Interlock Fuse & Loose Wire.Interlock Repaired + (ML20076K778)
- ML20076K779 + (ML20076K779)
- ML20076K780 + (ML20076K780)
- 05000370/LER-1983-037-03, /03L-0:on 830801,invalid Alarms Received for Fire Detection Zones Efa 175 (Reactor Bldg Elevation 768) & 186 (Reactor Bldg Annulus) Which Would Not Clear.Caused by Dust &/Or Welding Fumes Due to Maint Activities + (ML20076K781)
- ML20076K782 + (ML20076K782)
- ML20076K783 + (ML20076K783)
- ML20076K789 + (ML20076K789)
- ML20076K793 + (ML20076K793)
- ML20076K795 + (ML20076K795)
- ML20076K799 + (ML20076K799)
- ML20076K800 + (ML20076K800)
- ML20076K804 + (ML20076K804)
- ML20076K812 + (ML20076K812)
- ML20076K813 + (ML20076K813)
- ML20076K814 + (ML20076K814)
- ML20076K815 + (ML20076K815)
- ML20076K817 + (ML20076K817)
- ML20076K821 + (ML20076K821)
- ML20076K826 + (ML20076K826)
- ML20076K827 + (ML20076K827)
- 05000361/LER-1983-064-03, /03L-0:on 830602,w/core Operating Limit Supervisory Sys Out of Svc,Surveillance Test 5023-3-3.6 Failed to Verify That DNBR Was within Acceptable Limits. Caused by Conservative Thermal Power Uncertainty Bias + (ML20076K834)
- ML20076K835 + (ML20076K835)
- ML20076K836 + (ML20076K836)
- ML20076K838 + (ML20076K838)
- ML20076K846 + (ML20076K846)
- ML20076K847 + (ML20076K847)
- 05000315/LER-1983-058-03, /03L-0:on 830609,operator Discovered That Containment Sump Flow Monitoring Recorder (1-CS-001) Not Advancing.Caused by Holes in Chart Paper.Chart Paper Realigned on Drive Wheel + (ML20076K849)
- ML20076K854 + (ML20076K854)
- ML20076K858 + (ML20076K858)
- ML20076K860 + (ML20076K860)