Text

IR16 Inservice Inspection Report Summary
	ML111820361
Person / Time
Site:	Vogtle
Issue date:	06/30/2011
From:	Ajluni M; Southern Co, Southern Nuclear Operating Co
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	NL-11-1309
	Download: ML111820361 (100)
	v • d • e

Mark J. Ajluni. P.E. Southern Nuclear Nuclear Director Operating Company. Inc.

40 Inverness Center Parkway Post Office Box 1295 Alabama 35201 Tel 205.9927673 Fax 205.9927885 June 30. 2011 SOUTHERN'\

Docket Nos.: 50-424 NL-11-1309 COMPANY U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D. C. 20555-0001 Vogtle Electric Generating Plant-Unit 1 IR16 Inservice Inspection Report Summary Ladies and Gentlemen:

Southern Nuclear Operating Company (SNC) submits herewith the Vogtle Electric Generating Plant Unit 1, Interval 3, Period 2, Outage 1 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the fall 2009 maintenance/refueling outage. Paragraph IWA-6240 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI, 2001 Edition with addenda through 2003 requires submittal of the enclosed report.

The supporting inservice inspection documentation, e.g., examination plans and schedules, examination results and reports, examination methods and procedures, evaluation results, and corrective action and repairs, is available for review upon request at Vogtle Electric Generating Plant.

This letter contains no NRC commitments. If you have any questions, please advise.

Respectfully submitted,

~i~~

Nuclear Licensing Director MJAlLPHllac

Enclosure:

Vogtle Electric Generating Plant-Unit 1 Inservice Inspection Report Refueling Outage (IR16), Interval 3, Period 2, Outage 1

U. S. Nuclear Regulatory Commission NL-11-1309 Page 2 cc: Southern Nuclear Operating Company Mr. J. T. Gasser, Executive Vice President Mr. T. E. Tynan, Vice President-Vogtle Ms. P. M. Marino, Vice President-Engineering RType: CVC7000 U. S. Nuclear Regulatory Commission Mr. V. M. McCree, Regional Administrator Mr. P. G. Boyle, NRR Project Manager - VogUe Mr. L. M. Cain, Senior Resident Inspector-Vogtle

Vogtle Electric Generating Plant - Unit 1 IR161nservice Inspection Report Summary Enclosure Vogtle Electric Generating Plant - Unit 1 Inservice Inspection Report Refueling Outage (1R16), Interval 3, Period 2, Outage 1

SOUTHERN COMPANY A SOUTHERN A COMPANY INSERVICE INSPECTION REPORT REFUELING 16 INTERVAL 3 PERIOD 2 OUTAGE 1 Vogtle Electric Generating Plant Unit 1 (7821 River Road, P. O. Box 1600, Waynesboro, Georgia 30830)

Southern Nuclear Operating Company 40 Inverness Parkway Birmingham, Alabama 35242 COMMERCIAL OPERATION DATE: May 31,1987 DOCUMENT COMPLETION DATE: June 2011 I

VOGTLE ELECTRIC GENERATING (VEGP)

PLANT 1R16 FINAL REPORT TABLE OF CONTENTS SECTION VOLUME 1 (OWNER'S REPORT)

INTRODUCTION AND ABBREVIATIONS A

ASME FORM NIS-1 AND ABSTRACT B

INSERVICE INSPECTION (OWNER'S REPORT) EXAMINATION

SUMMARY

CLASS 1 AND 2 WELDS AND SUPPORT EXAMINATIONS C SYSTEM PRESSURE TESTS D REPORTABLE INDICATION

SUMMARY

E

OWNER'S REPORT FOR REPAIRS AND REPLACEMENTS (FORM NIS-2) F VOLUME 2 (151 EXAMINATION DATA)

EXAMINATION PROGRAM PLAN (TOTAL SCOPE

SUMMARY

) G

lSI EXAMINATION DATA H VOLUME 3 (CERTIFICATIONS)

PERSONNEL CERTIFICATIONS

EXAMINATION PROCEDURES {LISTING} J

EQUIPMENT CERTIFICATIONS & CALIBRATION BLOCKS (LISTING) K VOLUME 4 (FLOW ACCELERATED CORROSION - FAC)

FAC EXAMINATION

SUMMARY

L

FAC EXAMINATION DATA M VOLUME 1 CONTAINS THE INFORMATION TO MEET THE REQUIREMENTS OF ASME CODE 2001 EDITION w 2003 ADDENDA, SECTION XI, SUBSECTION IWA-6240 FOR SUBMITTAL OF A

SUMMARY

REPORT TO THE NRC FOLLOWING EACH REFUELING OUTAGE.

VOLUMES 2 AND 3 CONTAIN THE SUPPORTING DOCUMENTATION FOR THE EXAMINATIONS PERFORMED (RETAINED ON SITE BY VEGP)

VOLUME 4 CONTAINS DOCUMENTATION OF THE FLOW ACCELERATED CORROSION {FAC} INSPECTIONS PERFORMED (RETAINED ON SITE BY VEGP) 1

SOUTHERN A COMPANY sOUTHERN_

COMPANY SOUTHERN NUCLEAR OPERA TING COMPANY ENGINEERING PROGRAMS DEPARTMENT INSERVICE INSPECTIONS PLANT VOGTLE UNIT 1 REFUELING OUTAGE 16 SPRING 2011 Volume 1 Owner's Report

TAB A INTRODUCTION & ABBREVIATIONS

INTRODUCTION This report documents the examinations and tests performed at Vogtle Electric Generating Plant, Unit 1 th (VEGP-1) between October 23, 2009 {end of the fifteenth (15 ) maintenancelrefueling outage, 1R 15}

th and April 2, 2011 {end of the sixteenth (16 ) maintenance/refueling outage, 1R16} to meet the requirements of Article IWA-6000 ofthe American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI, 2001 Edition with 2003 Addenda (Code).

This report also addresses Code-applicable repairs and/or replacements, which were documented since the last maintenance/refueling outage at VEGP-1 through the completion of the sixteenth maintenance/refueling outage on April, 2,2011 done per the 2001 Edition with 2003 Addenda. The Owner's Reports for Repairs and Replacements (Form NIS-2) are included herein.

This report includes a summary of the steam generator tube inspections which are required per VEGP Technical Specification 5.6.10. The detailed information will be provided in a separate report one hundred eighty (180) days after the initial entry into MODE 4 following completion of an inspection performed in accordance with Technical Specification 5.5.9. A summary of these inspections is included behind Tab B in the Abstract.

1-1

LIST OF ABBREVIATIONS ACC Acceptable AD Anchor/Darling AFW Auxiliary Feedwater System AI GPC Action Item (followed by unique no. denoting Action Item number)

AN II Authorized Nuclear Inservice Inspector ASME American Society of Mechanical Engineers ASNT American Society for Nondestructive Testing ASTM American Society for Testing and Materials BC Branch Connection CCSS Centrifugally Cast Stainless Steel CCW Component Cooling Water CE Combustion Engineering CH Closure Head CR Condition Report CS Containment Spray CVCS Chemical and Volume Control System OS Downstream ET Eddy Current Examination EVAL Evaluation FAC Flow-Accelerated Corrosion (may also be referred to as "erosion/corrosion")

FB Flange Bolting FNF FAC Notification Report FW Feedwater System FSAR VEGP Final Safety Analysis Report (includes updates thereto)

GEO Geometric Indications GPC Georgia Power Company HHSI High Head Safety Injection HL Hanger Lug HX Heat Exchanger HYD Hydraulic Snubber lEN NRC Information Notice (may also be shown as "IN" followed by unique no. denoting notice number)

IND Indication INF Indication Notification Form lSI Inservice Inspection 1ST Inservice Testing ITS VEGP Improved Technical Specification 10 Inside Diameter IR Inside Radius LB Large Bore LD Longitudinal Seam Weld Extending Downstream LD-I Longitudinal Seam Weld Downstream Inside Radius of Elbow LD-O Longitudinal Seam Weld Downstream Outside Radius of Elbow LMT Lambert, MacGill and Thomas LU Longitudinal Seam Weld Extending Upstream LU-I Longitudinal Seam Weld Upstream Inside Radius of Elbow LU-O Longitudinal Seam Weld Upstream Outside Radius of Elbow MECH Mechanical Snubber MS Main Steam System MT Magnetic Particle Examination NCI Nonconformance Item NDE Nondestructive Examination 1*2

LIST OF ABBREVIATIONS - (continued)

NI No Indication NRC United States Nuclear Regulatory Commission NRC-B NRC Bulletin (followed by unique no. denoting Bulletin number)

NRI No Recordable Indication NSCW Nuclear Service Cooling Water System OR Outside Radius PL Pipe Lug PM Paul-Munroe ENERTECH PR Pipe Restraint PROF Profile PS Pipe Support PSA Pacific Scientific PSI Preservice Inspection PT Liquid Penetrant Examination RCS Reactor Coolant System RCP Reactor Coolant Pump RHR Residual Heat Removal System RI Recordable Indication RLW Refracted Longitudinal Wave RL Restraint Lug RPV Reactor Pressure Vessel RR Relief Request (followed by unique no. denoting relief request number)

RWST Refueling Water Storage Tank SAT Satisfactory Examination Results SB Small Bore SCS Southern Company Services SI Safety Injection System SNC Southern Nuclear Operating Company SUP Supplemental Data T&C Thickness and Contour TDAFW Turbine Driven Auxiliary Feedwater (Pump)

UNSAT Unsatisfactory Examination Results US Upstream UT Ultrasonic Examination VEGP Vogtle Electric Generating Plant (common unless followed by "-1 or "-2" If to designate a specific plant unit)

VT Visual Examination W Westinghouse 1-3

TABB ASME FORM NIS-1 AND ABSTRACT

Form NIS-1

Abstract

FORM NIS*1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner: Southern Nuclear Operating Company (as agent for Georgia Power Company), 40 Inverness Center Parkway, Birmingham, AL 35242

2. Plant: Vogtle Electric Generating Plant, 7821 River Road P. O. Box 1600, Waynesboro, Georgia 30830

3. Plant Unit: One

4. Owner Certification of Authorization: N/A

5. Commercial Service Date: 05/31/87

6. National Board Number for Unit: N/A

7. Components Inspected:

Component or Manufacturer or Manufacturer or Installer State or National Board Appurtenance Installer and Serial Number Province Number Address Number Reactor Combustion Eng. 8971 N/A 21668 Pressure Vessel Inc.,

Chattanooga, TN Steam . Westinghouse GAGT 1881, GAGT 1882, . N/A NA Generators 1 Elec., GAGT 1883, GAGT 1884, thru 4 Pensacola, FL Pressurizer Westinghouse 62189 N/A NA Elec.,

Pensacola, FL Residual Heat . Joseph Oat Corp., . 2322-2A N/A NA Removal Heat Camden, NJ Exchanger, Train "An Selected Piping, Pullman Power i System Numbers 1201, 1204, N/A N/A Components, and Supports I Williamsport, Products, PA 1205,1208,1301,1302,&

1305 i

2-1

FORM NIS*1 (Back)

8. Examination Dates: October 23.2009 to April 2, 2011

9. Inspection Period Identification: Second Period

10. Inspection Interval Identification: Third Inspection Interval

11. Applicable Edition of Section XI 2001 Addenda 2003

12. Date/Revision of Inspection Plan: June 15, 2010/ Version 4.0

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. (See Abstract and Examination Summary Listings)

14. Abstract of Results of Examinations and Tests. (See Abstract)

15. Abstract of Corrective Measures. (See Abstract)

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) N/A Date: 2~JlI,.J 2011 Signed: Southern Nuclear Qperatinc Company. Inc.

for Georgia Power CompanX'

~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State of Georgia and employed by The Hartford Steam Boiler Inspection and Insurance Company of Connecticut of Hartford. CT have inspected the components described in this Owner's Report during the period October 23, 2009 to April 2. 2011, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a losS of any kind arising from or connected with this inspection.

~4.kgzH Commission: -:6tt~_7$'~le",,--~

....... ~

~gnature National Board. State. Province. and Endorsements 2*2

ABSTRACT - ASME CLASS 1 AND 2 Introduction/Status The ASME Boiler and Pressure Vessel Code,Section XI, 2001 Edition (Code), with the 2003 Addenda, is the applicable code for conducting inservice inspection activities during the third ten-year inspection interval at VEGP-1. Examinations and tests required by the Code are scheduled in accordance with U

"Inspection Program B as defined in Code paragraphs IWB-2412 and IWC-2412. This "Owner's Report for Inservice Inspection" is for those third inspection period examinations and tests which were performed between October 23,2009, (end of the 1R15 maintenance/refueling outage) and April 2, 2011 (end ofthe 1R 16 maintenance/refueling outage).

VEGP has implemented ASME Section XI, Appendix VIII, "Performance Demonstration for Ultrasonic Examination Systems," as required by 10CFR 50.55a, amended by the Federal Register Notices 64 FR 51370 dated September 22, 1999, as later modified by 69 FR58804, dated October 1,2004. The initial Rule specified the 1995 Edition with Addenda through 1996 as the applicable edition of ASME Section XI, Appendix VIII. The 2004 Rule incorporated the 2001 Edition with NRC caveats. VEGP has, except where requests for relief, technical alternatives or exemptions have been approved, complied with the requirements for expedited implementation of the applicable Appendix VIII supplements using the EPRI Performance Demonstration Initiative (PDI).

In addition to the summary of inservice inspection activities, this report addresses Code-applicable repairs and replacements documented at VEGP-1 since 1R15 through the end of 1R16. Class 1 and Class 2 Owner's Reports for Repairs or Replacements (Form NIS-2) are provided herein.

It should be noted that Authorized Nuclear Inservice Inspector (ANII) inspection services were provided for those examinations and tests required by the Code. ASME Section XI examinations and tests are itemized in the applicable sections by reference to Examination Category. Examinations which do not meet the Code-required coverage either reference request(s) for relief or indicate that additional relief is required.

Class 1 Examinations Selected Class 1 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT), magnetic particle testing (MT), liquid penetrant (PT), and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope of VEGP-1 examinations conducted, no Class 1 components were observed to have reportable indications. Tab E details and provides a disposition for Class 1 and Class 2 component that were determined to have reportable indication. Since there were no observed Class 1 reportable Indications, there will not be any entries in Tab E for Class 1 components.

Three (3) Class 1 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. More than ninety percent (90%) of the required volume must be examined as addressed in ASME Section XI Code Case N-460 for adequate ASME Section XI Code-required examination coverage to be attained. As noted herein, the subject code case has been approved by the NRC for use as documented in NRC Regulatory Guide 1.147. It is impractical to achieve the ASME Section XI Code-required coverage due to the geometric configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief request process as allowed by 10 CFR 50.55a.

Class 1 System Pressure Tests

Table IWB-2500-1, Examination Category B-P of the 2001 Edition with Addenda through 2003 of ASME Section XI requires the performance of a system leakage test (IWB-5221) each refueling outage. This system leakage test (14910-101) was performed prior to plant startup following the refueling outage.

These visual examinations revealed minor leakage and boron residue at mechanical connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.

Class 2 Examinations Selected Class 2 components were examined by Southern Nuclear Operating Company (SNC) personnel utilizing ultrasonic testing (UT), magnetic particle testing (MT), liquid penetrant (PT), and visual testing (VT) methods, as applicable. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope of VEGP-1 examinations conducted, no Class 2 components were observed to have reportable indications. Tab E details and provides a disposition for Class 1 and Class 2 component that were determined to have reportable indication. Since there were no observed Class 2 reportable indications, there will not be any entries in Tab E for Class 2 components.

Two (2) class 2 piping and/or equipment welds had limited coverage during examinations because of physical limitations due to the geometric configuration of the welded areas. As with the Class 1 examinations, it is impractical to achieve the ASME Section XI Code-required coverage due to the geometric configuration of the welded areas. These limited examinations will be submitted to the NRC through the relief request process as allowed by 10 CFR 50.55a.

Class 2 System Pressure Tests Table IWC-2500-1, Examination Category C-H of the 2001 Edition with Addenda through 2003 of ASME Section XI requires system leakage tests. The specific system leakage tests performed are itemized in the System "Pressure Tests" portion of this report document.

The visual examinations performed during these system leakage tests revealed minor leakages at the brazed tube-to-header connections on Containment Coolers 1-1501-A7-002-000, 1-1501-A7-005-000 and 1-1501-A7-006-000. Comparable leakage has been previously identified and evaluated during prior pressure tests and during construction and determined acceptable for use in operation. The remainder of the visual examinations performed during these system pressure tests found only minor leakage or residue at mechanical joints, such as valve stem packing and at flanged connections. These leakage conditions were either corrected or evaluated and determined acceptable for continued system operation.

Steam Generator Tube Inspections The inspection program addressed the known degradation mechanisms observed in Vogtle 1 in prior inspections as well as those regarded as potential degradation mechanisms. The program also addressed inspection requirements related to the implementation of temporary alternate repair criteria (TARC). The defined scope implemented during 1R16 included the following:

100% Bobbin examination of tubes in SGs 1 and 4, full length except for Rows 1 and 2, which were inspected from tube end to top tube support plate (TSP) from both hot leg (HL) and cold leg (CL).

100% +Point examination of Row 1 and Row 2 U-bends from the top TSP on the HL to the top TSP on the CL in all SGs.

+Point examination of Special Interest of bobbin possible flaw locations including U-bends and both the HL and CL.

100% +Point examination of HL tubes in all SGs from the top of tubesheet (TTS) to the licensed Temporary Alternate Repair Criteria (TARC) depth for H* (TSH +3/-15.2 inches). This inspection 2-4

captured 100% of the TTS and BLG/OXP populations, as defined below, along with the required periodic sample that came with regulatory approval of the TARC.

BLG = differential mix diameter discontinuity signal within the tubesheet of 18 volts or greater as measured by bobbin coil probe.

OXP = a tube diameter deviation within the tubesheet of 1.5 mils or greater as measured by bobbin coil profile analysis.

25% +Point examination of SG1 and SG4 CL tubes TTS +3/-3 inches. This inspection was aimed at early warning awareness of TTS degradation mechanisms and was analogous to a similar inspection that was performed in SG2 and SG3 during 1R15.

25% +Point examination of dents and dings 2: 2 volts in HL straight length and U-bends of all SGs.

100% visual inspection of tube plugs in all four SGs.

The Vogtle 1R 16 SG inspection plan met or exceeded the requirements of the EPRI examination guidelines and was aligned with NMP-ES-004-GL01, Revision 9, "Steam Generator Strategic Plan."

There was no NDE inspection scope expansion required during Vogtle 1R16.

The table below documents the list of plugged tubes and an indication of whether a stabilizer was installed during Vogtle 1R16.

I SG R~ Col Ind Outage . Plugging Basis Stabilizer Installed? .*:-1 I 1 26 110 PCT 1R16 Tech. SR.ec. % TW Limit No I l 4 8 57 SAIL 1R16 Plug on Detection No I Explanation:

1 - Bobbin Volumetric Sizing 2 - Single Axial Crack 2-5

Class 1 and 2 Component Supports Selected Class 1 and 2 component supports were examined by Southern Nuclear Operating Company (SNC) personnel utilizing the visual testing (VT) method. Specific components and examination areas are itemized in the applicable portions of this document.

During the scope of VEGP-1 examinations conducted, no component supports were observed to have unsatisfactory results.

Class MC Containment Examinations and Tests (lWE)

During the VEGP-1 Spring 2011 maintenance/refueling outage, General Visual, VT-3 and VT-1 examinations were performed on Class MC Pressure retaining components with their integral attachments. These examinations were performed in accordance with ASME Section XI, Subsection IWE of the 2001 Edition through the 2003 Addenda and were performed using NMP-ES-024-204 "Detailed Visual Examination (lWE)" and NMP-ES-024-207 "General Visual Examination (IWE)". Per procedure NMP-ES-024-204, the pressure retaining bolting and the containment pressure boundary was examined for defects that could violate the leak-tight or structural integrity.

Personnel performing the examinations were qualified in accordance with VEGP procedure NMP-ES-024 100 "Qualification and Certification of Nondestructive Examination and Testing Personnel". Optical aids such as flashlights, mirrors and binoculars were used when performing the examinations that included both direct and remote visual examination methods.

Categorv E-A, Containment Surfaces It was discovered that Vogtle had not been performing IWE examinations on the portion of the containment pressure boundary located in the reactor cavity, i.e. the area under the reactor vessel. The lack of performing these examinations was documented in Vogtle's corrective action program under condition reports 2011103403, 2011104034 and 2011105287. Due to this discovery a General Examination of the Reactor Cavity Area was conducted during 1R16. The General Examination identified areas that required further examination, which were documented under Vogtle's condition report 2011104688. After some prep work was performed to clean the areas in question a Detailed Visual Examination was performed along with Ultrasonic Thickness Measurements. The Detail Visual and the Ultrasonic Thickness measurements were performed and the result was that based on examination the containment pressure boundary had maintained its structural integrity and leak tightness. These examinations are documented under surveillance 84303-101-1101014101. The other areas or anomalies identified consisted of surface rust, scratches, discolorations, etc. and were evaluated as not affecting the structural integrity or leak tightness of the containment pressure boundary.

Only the containment pressure boundary located in the reactor cavity was examined this refueling outage.

The entire containment pressure boundary, including the portion in the reactor cavity will be examined during 1R17.

Inspection of the moisture barrier was not performed during refueling outage 1R16.

The following containment pressure boundary bolted connections were examined during 1R16 while the connections were disassembled for work activities. VT-1 or VT-3 examinations were performed to fulfill the requirements. No anomalies of the examined components were identified. Examinations were performed under work orders 1100512801,1100513001 and 1100914501. Results of examinations are documented under Surveillance 85053-101-1101012901.

Personnel Air Lock Emergency Air Cover 12101R2014 Escape Air Lock Emergency Air Cover 12101R2015 Dedicated Outage Penetrations 5-M & 55-M 2-6

Class CC Containment Examinations (lWL)

None performed in 1R16 Status of Examinations Required for the current Interval 51 nd This 1R16 Outage was the 1 Outage, 2 Period of the 3 rd Interval. The results from this outage, combined with the "scheduled" examinations for the next refueling outages (1R17, Fall 2012 and 1R18, Spring 2014) will represent 100% of the total Class 1 and 2 scope for the current period and interval.

VEGP Unit 1 is within ASME Code compliance, pending NRC approval of the volumetric and/or surface examination limitations. Requests for relief will be submitted within the required time frame specified by 10 CFR 50.55a.

Applicable Code Cases The applicable Code Cases for the 1R16 Outage are identified in Enclosure 4, Volume 1 of the VEGP Units 1 and 2 Inservice Inspection Plan, Third Inspection Intervals. The Code Cases and limitations of use are derived from Revision 14, 15, and 16 of NRC Regulatory Guide 1.147.

2-7

lABe INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

CLASS 1 AND 2 WELD EXAMINATIONS

CLASS 1 AND 2 SUPPORT EXAMINATIONS

Vogtle 1R16 - Examination Summary (Total Piping)

ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s)

~at/ltem _ No(s)

R-A 11201-031-3-RB Examined per MRP-146 NMP-ES-024-501 S11V1U013 NRI R1.11H 2" ELBOW TO PIPE requirements.

R-A 11201-042-3-RB Examined per MRP-146 NMP-ES-024-501 S11V1U018 NRI R1.11H 2" ELBOW TO PIPE requirements.

R-A 11201-046-3-RB Examined per MRP-146 NMP-ES-024-501 S11V1U014 NRI r--R1.11H 2" ELBOW TO PIPE - -

requirements.

R-A 11201-051-3-RB Examined per MRP-146 NMP-ES-024-501 S11V1U015 NRI R1.11H 2" ELBOW TO PIPE requirements.

R-A 11204-023-18-RB NMP-ES-024-501 S11V1U031 NRI NA R1.20 6" ELBOW TO PIPE R-A 11204-023-19-RB NMP-ES-024-501 S11V1U032 NRI NA R1.20 6" PIPE TO ELBOW R-A 11204-124-2-RB NMP-ES-024-501 S11V1U011 NRI NA

_____R1.20 10" PIPE TO ELBOW R-A 11204-124-3-RB NMP-ES-024-501 S11V1U012 NRI NA R1.20 10" ELBOW TO PIPE l

R-A 11204-125-2-RB NMP-ES-024-501 S11V1UOO7 NRI NA R1.20 10" PIPE TO ELBOW R-A 11204-125-3-RB NMP-ES-024-501 S11V1UOO8 NRI NA R1.20 10" ELBOW TO PIPE -

R-A 11204-126-2-RB NMP-ES-024-501 S11V1UOO5 NRI NA

~:=

10" PIPE TO ELBOW R-A 11204-126-3-RB R1.20 NMP-ES-024-501 S11V1UOO6 NRI NA

~_ R1.20 10" ELBOW TO PIPE -

R-A 11204-127-2-RB NMP-ES-024-501 S11V1UOO9 NRI NA R1.20 10" PIPE TO ELBOW R-A 11204-127-3-RB NMP-ES-024-501 S11V1U010 NRI NA I R1.20 10" ELBOW TO PIPE

~R.A ~1.11/16 11204-243-29-RB 1.5" PIPE TO VALVE NMP-ES-024-501 S11V1U021 NRI Examined base material only (SW) per MRP-146.

. R-A 11204-243-30-RB Examined base material only (SW)

NMP-ES-024-501 S11V1U022 NRI l

I R1.11 R-A

_.R 1.11H 1.5" VALVE TO PIPE 11204-243-31-RB 1.5" PIPE TO ELBOW NMP-ES-024-501 S11V1 U023 NRI per MRP-146.

Examined weld and base material per MRP-146.

3-1

Vogtle 1R16 - Examination Summary (Total Piping)

ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s)

Cat litem No(s)

R-A 11204-244-24-RB Examined base material only (SW)

NMP-ES-024-501 S11V1U024 NRI R1.11 1.5" VALVE TO PIPE per MRP-146.

R-A 11204-244-25-RB Examined weld and base material per NMP-ES-024-501 S11V1U025 NRI R1.11H 1.5" PIPE TO ELBOW MRP-146.

f~

R-A 11204-245-29-RB Examined base material only (SW)

NMP-ES-024-501 S11V1U027 NRI R1.11 1.5" VALVE TO PIPE Der MRP-146.

R-A 11204-245-30-RB Examined weld and base material per NMP-ES-024-501 S11V1U026 NRI l R1.11H 1.5" PIPE TO ELBOW MRP-146.

!I R*A 11204-246-32-RB NMP-ES-024-501 S11V1U028 NRI Examined base material only (SW)

R1.11 1.5" VALVE TO PIPE -

per MRP-146.

R-A 11204-246-33-RB Examined weld and base material per t NMP-ES-024-501 S11V1U029 NRI R1.11H 1.5" PIPE TO ELBOW MRP-146.

r R-A R1.11 1120S*009-6-RB 3" PIPE TO BRANCH CONNECTION NMP-ES-024-501 S11V1U030 NRI NA 3-2

Vogtle 1R16 - Examination Summary (Total Equipment)

ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s)

Cat /Item No(s)

N-722 11201-B6-001*I10*VT NMP-ES-024-202 S11V1VOO1 Accept NA i- B15.120 Cf-iANNEL HEAD DRAIN TUBE (WCAP 12907)

B*D 11201-B6*001 -IR-01 NMP-ES-024-S13 S11V1U043 NRI NA f-B3.140 INLET NOZZLE INNER RADIUS B-D 11201*B6*001 -IR-02 NMP-ES-024-S13 S11V1U044 NRI NA I-- --

B3.140 INLET NOZZLE INNER RADIUS -

B-B 11201-B6-001-W08 80% Code Coverage.

NMP-ES-024-S16 S11V1U042 NRI B2.40 TUBE PLATE TO CHANNEL HEAD WELD Relief Request required.

N-722 11201-B6-002-110-VT NMP-ES-024-202 S11V1VOO2 Accept NA f----- _B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907)

N*722 11201*B6*003*I1 O*VT NMP-ES-024-202 S11V1VOO3 Accept NA i B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907)

N*722 11201*B6*004*I10-VT NMP-ES-024-202 S11V1VOO4 Accept NA B15.120 CHANNEL HEAD DRAIN TUBE (WCAP 12907)

C-A 11201 -B6*004-W07 NMP-ES*024-S16 S11V1U041 NRJ NA

' . - C1.30 LOWER SHELL BARREL TO TUBE PLATE WELD B-N*1 11201-V6-001-102 NMP-ES-024-203 S11V1VOOS Accept NA B13.CH VESSEL CLOSURE HEAD INTERIOR (FSAR 5.3.3.7)

R-A 11201-V6-001-W33-RB VENDER VENDER NRJ NA R1.15D OUTLET NOZZLE N1 SAFE END WELD BMV R*A 11201-V6-001-W34-RB VENDER VENDER NRJ NA R1.1SE INLET NOZZLE N2 SAFE END WELD BMV R-A 11201-V6-001-W35-RB VENDER VENDER NRI NA R1.15E INLET NOZZLE N3 SAFE END WELD BMV R-A 11201-V6*001-W36-RB VENDER VENDER NRI NA

-- R1.1SD OUTLET NOZZLE N4 SAFE END WELD BMV R-A 11201-V6-001 -W37 -RB VENDER VENDER NRI NA R1.15D OUTLET NOZZLE N5 SAFE END WELD BMV R-A 11201-V6-001-W38-RB VENDER VENDER NRI NA R1.15E INLET NOZZLE N6 SAFE END WELD BMV R-A 11201*V6-001-W39-RB VENDER VENDER NRJ NA R1.15E INLET NOZZLE N7 SAFE END WELD BMV 3-3

Vogtle 1Ri6 - Examination Summary (Total Equipment)

, ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s)

Cat /Item _ No(!;)

R-A 11201-V6-001-W40-R8 VENDER VENDER NRI NA c R1.1SD OUTLET NOZZLE N8 SAFE END WELD BMV --- --

N-729 11201-V6-CRDM(VT-2) NMP-ES-024-202 S11V1V017 Accept NA I B4.10 VT2 VESSEL CLOSURE HEAD EXTERIOR -- -- --

B-D 11201-V6-002-IR-02 NMP-ES-024-513 S11V1U016 Accept NA 1------

83.120 6" SAFETY NOZZLE INNER RADIUS f~-

B*D 11201-V6-002-IR-03 NMP-ES-024-513 S11V1U017 Accept NA B3.120 6" RELIEF NOZZLE INNER RADIUS B*D 11201-V6-002-W12 NMP-ES-024-401 S11V1MOO1 NRI 55% Code Coverage.

B3.110 UPPER HEAD TO 6" SAFETY NOZZLE WELD NMP-ES-024-516 S11V1U019 NRI ---

Relief Request required.

B-D 11201-V6-002-W13 NMP-ES-024-401 S11V1MOO2 NRI 55% Code Coverage.

B3.110 UPPER HEAD TO 6" SAFETY NOZZLE WELD NMP-ES-024-516 S11V1U020 ---

NRI --- - Relief Request required.

C-A 11205-E6-001-W01 NMP-ES-024-506 S11V1UOO1 NRI NA C1.10 TUBE SIDE SHELL TO FLANGE WELD --- ----

C-A 11205-E6-001-W02 NMP-ES-024-506 S11V1UOO2 NRI NA i-------- C2.1 0 TUBE SIDE SHELL TO FLANGE WELD -- --

CoB 11205-E6-001-W04 NMP-ES-024-301 S11V1POO1 NRI 41 % Code Coverage.

1------<;2.21 TUBE SIDE SHELL TO 14" INLET NOZZLE WELD NMP-ES-024-506 S11V1 UOO3 NRI Relief Reguest reguired.

CoB 11205-E6-001-W05 NMP-ES-024-301 S11V1POO2 NRI 41 % Code Coverage.

C2.21 TUBE SIDE SHELL TO 14" INLET NOZZLE WELD NMP-ES-024-506 S11V1UOO4 NI3I_ Relief Reguest reguired.

3-4

Yogtle 1R16 - Examination Summary (Total Supports)

ASME Exam/Cal Examination/Area Examination Section XI Sheet Results Remarks (Sort) Procedure(s)

Cat litem Noes).

F-A 11201-029*H021 NMP-ES-024-203 S11V1VOO7 SAT N/A F1.10S MECHANICAL SNUBBER F*A 11201*04S-HOO5 NMP-ES-024-203 S11V1VOO8 SAT N/A F1.10S MECHANICAL SNUBBER F*A 11204*025*H012 NMP-ES-024-203 S11V1VOO6 SAT N/A F1.10S MECHANICAL SNUBBER 1 ~

F*A 11204*124-H014 NMP-ES-024-203 S11V1V013 SAT N/A I---- F1.10S MECHANICAL SNUBBER F*A 11204*127*H015 NMP-ES-024-203 S11V1V014 SAT N/A F1.10S MECHANICAL SNUBBER F*A 11204-24S-HOO1 NMP-ES-024-203 S11V1VOO9 SAT N/A r--F1.10S MECHANICAL SNUBBER F*A 1120S*009*HOO2 NMP-ES*024*203 S11V1V016 SAT N/A F1.10S MECHANICAL SNUBBER f-F-A 1120S-Q12-H012 NMP-ES-024-203 S11V1V012 SAT N/A F1.10S MECHANICAL SNUBBER I~-

F*A 11301*104*HOO2 NMP-ES-024-203 S11V1V010 SAT N/A i--F1.20S MECHANICAL SNUBBER F*A 11301-10S*HOO3 NMP-ES-024-203 S11V1V015 SAT N/A r------F1.20S MECHANICAL SNUBBER F*A 11302*110-H019 NMP-ES-024-203 S11V1V011 SAT N/A F1.20S MECHANICAL SNUBBER I---- F-A 11305*0S4-HOO7 NMP-ES-024-203 S11V1V018 SAT N/A L~~ _ F1.20S MECHANICAL SNUBBER -

3*5

TABD INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

SYSTEM PRESSURE TESTS

SYSTEM PRESSURE TESTS The following system pressure tests on Class 1 and Class 2 components were performed after the last refueling outage (1 R15) through the completion of the sixteenth refueling outage (1 R16). The system pressure tests indicated include system leakage tests for:

Class 1 components (IWB-2500-1, Examination Category B-P),

Class 2 components (IWC-2500-1, Examination category C-H) not required to operate during normal plant operation which are identified as 84003-101 through 84003-117, and,

Class 2 components (IWC-2500-1, Examination category C-H) required to operate during normal plant operation which are identified as 84003-1AA through 84003-1CR.

Boundaries for the system pressure tests are described in the Pressure Test Plan (Inservice Inspection Plan-Volume 3). Examination results are discussed in the applicable sections of this report document.

The examination data for these system pressure tests is available at the plant site for review upon request.

System Pressure Tests)

, Test Number Exam CatJ Test Description Item No.

14910-101 B-P I B15.10 Class 1 System Leakage Test 84003-101 C-H I C7.10 Reactor Head Vent System Leaka~e Test 84003-104 C-H/C7.10 Safety Injection Pump 1204-P6-003 Discharge System Leakage Test 84003-105 C-H I C7.10 Safety Injection Pump 1204-P6-004 Discharge System Leakage Test 84003-108 C-H I C7.10 Penetration 30 (SI to Cold Legs) System Leakage Test 84003-112 C-H I C7.10 Containment Spray Train "A" System Leakage Test 84003-113 C-H I C7.10 Containment Spray Train "B" System Leakage Test 84003-117 C-H I C7.10 Line 1208-133 (HV-8104 to Valve 185 Flow Test) System Leakage Test 84003-1AA C-H I C7.10 Charging Line Inside Containment System Leaka~e Test 84003-1AB C-H I C7.10 Letdown Line Inside Containment System Leakage Test 84003-1AC C-H I C7.10 Reactor Coolant (RC) Pumps 1, 2, 3, and 4 Seal Leakoff Inside Containment System Leakage Test 84003-1 AD C-H I C7.10 RC Pump 1 Seal Injection from Penetration 54 to Valve 006 System Leakage Test 84003-1AE C-H I C7.10 RC Pump 2 Seal Injection from Penetration 53 to Valve 359 System Leakage Test 84003-1AF C-H I C7.10 RC Pump 3 Seal Injection from Penetration 52 to Valve 360 System Leakage Test 84003-1AG C-H I C7.10 RC Pump 4 Seal Injection from Penetration 51 to Valve 361 System Leaka~e Test 84003-1AH C-H I C7.10 Reactor Coolant System (RCS) Hot Leg Sample Lines to Penetration 24 System Leakage Test 84003-1AI C-H I C7.10 Sample Line from Valve 101 to Valve HV-3514 S~stem Leakage Test 84003-1AJ C-H I C7.10 CVCS System Leakage Test with Normal Charging Pump Operating (Outside Containment) 84003-1AK C-H I C7.10 Centrifugal Charging Pump 1208-P6-002 (Train "A") Discharge System Leakage Test 84003-1AL C-H I C7.10 Centrifugal Charging Pump 1208-P6-003 (Train "B") Discharge System Leakage Test 84003-1 AN C-H I C7.10 Accumulator Tank 1 (1204-V6-002) System Leakage Test 84003-1AO C-H I C7.10 Accumulator Tank 2 (1204-V6-003) System Leakage Test 84003-1AP C-H I C7.10 Accumulator Tank 3 (1204-V6-004) System Leakage Test 84003-1AQ C-H I C7.10 Accumulator Tank 4 (1204-V6-005) System Leakage Test 84003-1AW C-H I C7.10 Refueling Water Storage Tank (RWST) System Leakage Test C-H I C7.10 4*1

Test Number Exam Catl Test Description Item No.

84003-1AY C-H I C7.10 Sample Line from Valve 097 to Valve HV-3S08 System Leakage Test 84003-1AZ C-H I C7.10 Penetration 24 Outside Containment System Leakage Test (Post-Accident Sampling) 84003-1BA C-H I C7.10 Nuclear Service Cooling Water (NSCW) Train "A" System Leakage Test (Outside Containment) 84003-1BC C-H I C7.10 NSCW Train "B" System Leakage Test (Outside Containment) 84003-1 BE C-H I C7.10 Containment Coolers 1S01-A7-001 and 1S01-A7-002 System Leakage Test 84003-1BF C-H I C7.10 Containment Coolers 1S01-A7-003 and 1S01-A7-004 System Leakage Test 84003-1BG C-H I C7.10 Containment Coolers 1S01-A7-00S and 1S01-A7-006 System Leakage Test 84003-1BH C-H I C7.10 Containment Coolers 1S01-A7-007 and 1S01-A7-008 System Leakage Test 84003-1BI C-H I C7.10 Cooling Coils 1S11-E7-001 and 1S1S-A7-001 System Leakage Test 84003-1BJ C-H I C7.10 Cooling Coils 1S11-E7-002 and 1S15-A7-002 System Leakage Test 84003-1BO C-H I C7.10 Steam Generator 1201-B6-001 System Leakage Test 84003-1BP C-H I C7.10 Steam Generator 1201-B6-002 System Leakage Test 84003-1 BO C-H I C7.10 Steam Generator 1201-B6-003 System Leakage Test 84003-1BR C-H I C7.10 Steam Generator 1201-B6-004 System Leakage Test 84003-1BS C-H I C7.10 Penetration 7 System Leakage Test (Outside Containment Steam Generator 1 Blowdown to Heat Exchanger) 84003-1BU C-H I C7.10 Penetration 8 System Leakage Test (Outside Containment Steam Generator 2 Blowdown to Heat Exchanger) 84003-1BV C-H I C7.10 Penetration 9 System Leakage Test (Outside Containment Steam Generator 3 Blowdown to Heat Exchanger) 84003-1BW C-H I C7.10 Penetration 10 System Leakage Test (Outside Containment Steam Generator 4 Blowdown to Heat Exchanger) 84003-1 BY C-H I C7.10 Penetration 11B System Leakage Test (Outside Containment Steam Generator 1 Blowdown to Sample) 84003-1BZ C-H I C7.10 Penetration 11C System Leakage Test (Outside Containment Steam Generator 2 Blowdown to Sample) 84003-1CA C-H I C7.10 Penetration 12B System Leakage Test (Outside Containment Steam Generator 3 Blowdown to Sample) 84003-1CB C-H I C7.10 Penetration 12C System Leakage Test (Outside Containment Steam Generator 4 Blowdown to Sample) 84003-1CC C-H I C7.10 Main Steam Loop 1 System Leakage Test (Outside Containment) 84003-1CD C-H I C7.10 Main Steam Loop 2 System Leakage Test (Outside Containment) 84003-1CE C-H I C7.10 Main Steam Loop 3 System Leakage Test (Outside Containment) 84003-1CF C-H I C7.10 Main Steam Loop 4 System Leakage Test (Outside Containment) 84003-1CN C-H/C7.10 Main Feedwater Loop 1 System Leakage Test (Outside Containment) 84003-1CO C-H I C7.10 Main Feedwater Loop 2 System Leakage Test (Outside Containment) 84003-1CP C-H I C7.10 Main Feedwater Loop 3 System Leakage Test (Outside Containment) 84003-1CO C-H I C7.10 Main Feedwater Loop 4 System Leakage Test (Outside ContainmentL 84003-1CR C-H I C7.10 Excess Letdown Heat Exchanger System Leakage Test 4-2

lABE INSERVICE INSPECTION EXAMINATION (OWNER'S REPORT)

SUMMARY

REPORTABLE INDICATION

SUMMARY

REPORTABLE INDICATION

SUMMARY

The following Indication Notifications Forms and/or Condition Reports were issued due to reportable indications or conditions being observed during the examination of either Class 1 or 2 components during the sixteenth (16th ) maintenanceirefueling outage at VEGP-1 (referenced attachments are available at the VEGP plant site for review upon request INF NO. and/or Affected Component/Area INF Disposition Condition Report N/A N/A None reported for 1R16 The Indication Notification Form(s) constitute only those reportable indications or conditions observed during the SNC Engineering Programs Department scope of work. With the exception of Steam Generator Tube Inspections any reportable indications or conditions observed by VEGP Site personnel or outside contractors during their scope of work should be identified by/to the VEGP Site in report document(s) which are referenced herein. Additional information related to Steam Generator Tube Inspections are to be provided in a separate report one hundred eighty (180) days after the initial entry into MODE 4 as required VEGP Technical Specification 5.6.10.

5-1

TABF OWNER'S REPORT FOR REPAIR AND REPLACEMENTS (ASME FORM NIS-2)

OWNER'S REPORTS FOR REPAIRS OR REPLACEMENTS (FORM NIS-2)

The following Owner's Reports for Repairs or Replacements (Form NIS-2) are provided for work activities documented at VEGP-1 since the last maintenance/refueling outage (1 R 15) through the completion of the sixteenth maintenancelrefueling outage (1 R16). Reports are identified by their respective traveler number which is denoted on each of the NIS-2 reports. The originals of the NIS-2 reports are filed with their respective traveler packages at the plant site. Only those NIS-2 reports applicable to VEGP-1 are included in this report document. Any attachments, e.g., code data reports, etc., referenced in the NIS-2 reports will be made available for review upon request at the plant site. It should be noted that even throL1gh Site procedures may require the use of an NIS-2 form, Code Case N-508-3 "Rotation of Service Snubbers and Pressure Relief Valves for the Purpose of Testing" does not require the use of an NIS-2 form provided certain conditions are met. Therefore Repair/Replacement activities not requiring NIS-2 forms per Code Case N-508-3 are excluded from this Owner's Report.

10008 10079 10096 11017 110049 10080 11000 11018 10051 10087 11009 11024 10054 10088 11011 11026 10055 10090 11014 11027 I 110067 10093 11015 I

10077 10095 11016 6-1

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler II 10008

1. Owner Southern Nuclear Operating Company Date June 02, 2011 Name 40 Inverness Center Parkway. Birmingham, AL Address Sheet of ,/'3 IiiJt1; V-I

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro, GA 30830 1100328801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NiA Name Authorflation No. NlA Plant Vog1Je Expiration Date NiA Address

4. Identification of System 1205 - Residual Heat Removal System

5. (a) Applicable Construction Code ASME Sec. /II 1971 Edition, Winter 1972 Addenda, _.......::..::.:..-'-_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement ActIvity _-",2""QO:.1:..ed=.-"2",OO",,3,,-,,,adoo:d~._

(c) Applicable Section XI Code Case(s}

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

RELIEF VALVE CROSBY VALVE & N56904-00-0036 NlA 1*PSV*8708A 1977 INSTALLED YES GAGE CO.

7. Description of Work Serial no. N56904-00-0017 was replaced with N56904-00-0036 under MWO 1081980701; ref. CR 2009110597. MWO 1100328801 verifies serial no. of valve.

8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating Pressure@ ExemptD Other 0 Pressure NOPT psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _V~T~.=2_________________~~~~~~~~_~~__~__~~~~__~~ _______~ __________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statementa made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

O"~

Type Code Symbol Stamp NlA Certificate (!Authorization No. NIA Expiration Date NIA Signed L:":'lr~ /\.'-- .J""

r i /C) ';~~;;,.L/. Date C-;: IS { ,

( Owner or Owner's Designee, Title )

\,~j CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessellnapectora and the state or Province of Q!lQrgj;;j and employed by HartfQra Stfi{;lm Boiler Ins(2ectiQII and tnsur;;jnQ§. CQ. of CQnnf!QticILt of HaaiQrri, ~Qnn~fi~!L( have inspected the components described in thIs Owner's Report during the period / ..2011 to La ~ MO -,.;zojel, and state that to the best of my knowledge and belief, the Owner has performed eKaminations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME COde,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and correct/ve measures described In this Owner's Report. Furthermore, neither the Inspector nor hili employer shall be liable In any manner for any personal injury or property damage or a los.s of sny kind arising from or connected with this Inspection.

~ iliSPec s Signature Commissions 6-A '1..S'6 National Board, State, Province and Endorsements

~,

Date c2.0 ~Vbo.!:l~ ~, 1

,__,""""'"t5 !Q I

~<1 055Y VALVE a GAG! COMPANY

_"INTH.M I MASS II?; f/-,PltJY/1 FORM :-;-V'l FOR SAn:. fY ,\,:\1) ~AF::TY REt::::F I.'."LVES Q.C.-44C AI req'JlCe1 by :,18 ?!O\IS;'JnS )( (be A5ME C*~<:e R.ules DATA RE?ORT Safsty ind S.He:y P..eliel Val"e!!

1. Manufa.ctured By Crosby Valve .'l G.:!;;;e Co.! :'3 :~!ld::-ick St .* WrJ::!ntham, ~ass. 020 111 J3 ~:ar.le ann :.'~:en Model NO. TD-toIR Order ~o ~3029S0 Co~tract D'3te 3/30/73 :-iattonal Board No. _ __

Westinghouse Electri~ Corp .* ~ucl~ar Energy Systems,

2. Manufactured For?* O. 80:< 355. Pit tsblll-;:;,h , ?d . .:5230 order ~o. S.'.6-CCK-IB3422-E~1

-lame aile! Addre'9

3. owner________G_e~o~r~g~i~a~P~o~w_e~r~&~L~t~~~h~t~C~,o~~~,p~.~:!~~~y______________________________________________

~a.me II.nd Add:e"

4. Location ot Pla.nt T..laynesboro, Georgia r..",-,./

5. Valve Identification RV-1-870BA GAE Serial ~O. :-l'55904-00-0036 Drawing No. )S-(-56904 Re'! . .\

Type _ _ _ _..:;R.;,;e::.;l::..l;;;.e::.;:;.f_ _ _ _ _ _ _ _ _ _ orifice Size L ?1;le Siz:e _ _ _ lnlet~Outlt!l,_4.;..-_

Sare~y,Sa(ety Rdid. Pilot. Po.... er .'\ctu;1!sd Incb ~r.cl1 Inch Inch

6. 3et pressure (PSlCl_ _ _ _ _4.;;;.5;;;.0_ _ _ _ _ __ ______~~~~-- 4000 ________--_F Ra.ted Temperat.!re Stamped C3.pacny ~9:..0~0~r.::.,,:..PM:.;':....;.;'..l:.;;d.:.;t:.;e:..;t'=--_ _ _ .i ~ ';. 01!erpressu.e _ _ alowdollln l(lI!S{<<J{ lO'! 0 f S.?

Outlet Hj'drolltat,c T~st (PSIG) [nlet _ _ _ _-=~. - ?"J:-.....______ M1~~~~~X~ ____~*=2~3_________________

7. Tn" marllrlai. 1e511;0. COnSlJ'llctlOD and "'o(~:naTlShlp ,:nmpl,,,.th ASME Code, St!('(ton iii.

Class _...=.2_ _-.t:.Ed 1 t:!. 0 r! t 9 71 \,1d en da Dat e-~~=-':"-~"':"::'------1

,I\U :.antet' 197::! Case ,,0.

\! _ _ _ __

Pres~ure Contalnmg or pressura Retamlng CtJmponents Sena.l ~o. lofatenal Speclfica.tlon rdenttficallon IncludIng Type or Grade Body ~9044S-38-004) ASHE SA351 Gr. CF8~1 Donnet ASME SA2!./) Gr. '.':C3

b. Bar Mock :u,d F"orglngs Support Rods NOl:zle DISC Insert SPfl~ Washers AdJtlstl:lli Bolt :;886 98 -l'i-J'J '3 SI',"dl", K5S1 i'!-40-'J053

Serial No. or Material Spec i(lcatlon rdelltlfic 1:Ion rneludlng Type or Grade

e. Spring :.lX261B-0032 ASTM A31J-70 Type 316

d. !lolting

e. Other Parts sucil as Pilot Components Crosby Va 1'lo-! 3t Ga:>e Co. Sy {~_r;/ft?::?::z..;:;1',,-,--

13 17= Sig;H!d

',(anu(acc'upr QA Manager Cerufil.a.te ot AU[ltOtlla.tlOll :'<0. _ _ _9:;.::2:..:6:.-____ uptre" October 28. 1977 CE:RTIFICAfE (;f ::'f!C? I~SPECTION

r. the undero:,rg~ed. ~o~dl!",~.! *.. ,t.:d, ,Jir:r~i:"'l:ilr,: '~"l\l~d~,. :h~ ~:~t~ull.3.1 B,)a.rd \)( BCHler Ind Pressure 'V~ss~I r~sp,I.:t'-,r" J.!h~ >.. 'Slar~ )f \J-,",'/ :lce .)( :fass. .t;ld em:llor'ed by Factocy :1utu:ll SVS('::;;;2:. :lor',IocL ~!aS5. ~"e inspected me fHli..lJpm~f1t ,~e,ef"lZJrl"; .:1 ::us J.t~~ f'~~p(/::t f)n ¥?p',..~*L , 19, LJ 71 lnc!

9t4UJ thd.t to th~ ~e5( ,if "irr" i{rtO\'" ,.;"~..;e l.lU hel:er :~~ \iJ.nu(at.:turer ~iil5 '"'un~tructed thl3 equIp'"

ment in accordanc~ N!th t~e ~PI-".**.Hl!C :3\l~j"Cllr:.; .. ,r AS\1E SeCtlOfl ,t!.

By !tgntng thl; cet~lrlC2.re. r!t.'l .....,itr th~ tr.~~~r-'~c~ nur ~ns etrplo;."er ;!';,Jk~s .tn? ',,"';]rTl.nfy. ex pre4Jsed or Imp1i~d. ,'nnc:ernt:1S! '::e ei:':~~':::"r:! : ... ~ '!l~jed tn thiS D3.*a, R.;;q."dLFutth~r:nore. neither the fnspector nor :'hS -=;':1p;v\*~r ~r:~U ~j~ + * .l.:--t~:a rlj.' *nannet f')r -\n~' ;Jl"r . . ,)ti.li InjUry .)f prop~r(lt dalT..a~e ill' a. los-'i I.,!t "in;-' lu;;-d ~r;'jl:\~ ";on!!: >,r -~q;l;~ 'C,;!ed Wt~h UlLS lnspectlc1n,

Ackwrighc-B 0 5 ton ~(;.mui"('ClJ.re,s :l,,[Clal Insuranct: Corr.pany - :1utua1 Boiler & Machlnery DLvist00.

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section Xl Traveler # _ _Ic.: 0:.: O. ;.4: :. 9 _ _ __

1. Owner Southern Nuclear Operating Company Date May 06.2011 Name 40 Inverness Center Parkway. BirminQ,ham. AL Sheet of Address

2. Plant Vog.t'e Electric Generating Plant Unit Name Waynesboro. GA 30830 1100169301 Address Repair/Replacement Organiution P.O. No .* Job No.. etc.

3. Work Pertormed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NiA PlantVo~ Expiration Date Ni/"

Address

4. Identification of System 1208 - Chemical and Volume Control System

~:~ ::',~~:~~: ~~~7~~U~:i~:C~i~~eXI use~~:r~!:~i::~::~:cem~~~t~:'ivity sum;~11:;:200:~~~~da, Code Case

5. ___ Nl._A_ _

(c) Applicable Section XI Code Case(s)

6. Identification at Components National Corrected, ASME Code Name ot Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identitication Built Installed (Yes or No)

VALVE DRESSER H201ABH N/A 1* 1208*U4*033 1982 REPLACED YES INDUSTRIES, INC

7. DescriptIon of Work Seal welded valve body to bonnet.

8. Test Conducted: Hydrostatic 0 PneumaticD Nominal Operating pressure[!]

Other 0 Pressure NOP psi Test Temp. NOT

9. Remarks _N~on~e~ _________________~~~~~~~ ____~~ __~ ______~ ____~~ ______________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate ¢"Authorlzation No. N/~ Expiration Date NIA i 1 Signed /'~ O. '\J"'-~ ( /. ) 'O~ L)" .. Data (::, <<~ (I I !

t I Owner or Owner'sLlesignee, Title

\,j I.

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid Commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Gf!9.rgJa and employed by Hartford Steam Boiler InsDBction and Insurance Co. of Connecticut of HartfO~ c~nnecJcut have inspected the components described In this Owner's Report during the period ~ /.J' ~ /"::1") U"l to £; I 0:40 I, and state that to the beat of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shalf be liable In any manner for any personal injury or property damage or a loss of any kind arising trom or connected with this

'~~ I spector Ignature Commissions ~ 7:S"t.

National Board, State, Province and Endorsements Data ~(") ;::n:.lI.. ::&'§: cH:>1:l

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY

. . . . . .~. . . . . . . . . . . . . . ,-

As Required By The Provisions Of The ASME Code Section XI Traveler # 10051

1. Owner South em Nuclear Operating Company Date June 03, 2011 Name IJA").!

40 Invemess Center Parkway, Birmingham, AL Address Sheet of 13 ,,!(J;-;2l/ - II

2. Plant VogUe Electric Generating Plant Unit Name Waynesboro, GA 30830 1091765401 Address Repair/Replacement Organization P.O. No.. Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorb:alion No. NlA Plant VogUe expiration Date NIA Address

4. Identification of System 1302 - Auxiliary Feedwater System

5. (a) Applicable Construction Code ASME Sec. 1/1 1974 Edition, Summer 1975 Addenda, ___ NI._A_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected. ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STUD MACKSON, INC NIA NIA HTN365740 2010 INSTALLED YES NUT NOVA MACHINE NIA N/A HT #8994826 2007 INSTALLED YES PRODUCTS CORP

7. Description of Work Replacement of studs/nuts for IFE5288.

B. Test Conducted; Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[!J Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ OF

9. Remarks VT*1 Inspection of studs/nuts Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of~thorizatiOn No. _ _ _ _ _ _..;.NI.:;;A~-,...'i-- _ _- Expiration Dete NlA Signed \:---if

\ -1 i\ '~l" , / \"-"~""""

',~,,"--- A

./,.,/ "'"_L( , / r--,I Date r 4

I

....ll"-l'K;,,'_-_'_' ,~' 'I

'_':""'1__'f_,,-

, Owner or Owner's Designee Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by _ Hartford Steam Boiler insoection and InsuranC,tLCQ, of Connect/eLf of Htrtfr;if~2ut have inspected the components described in this Owner's Report during the period S/fS/OlOID t o ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certlficete neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~ec~a4f Commissions -~Gl""A-'7"'--f':Z-!!"'S,,,,,,,(.~,c:.----=--:----:-=--:----,---

National Board, State, Province and Endorsements

'1J <i. c)<\ ~f) MAC K S 0 H, I H COR P 0 RAT E 0 P.O. BOX 12067 6\ ~~(J\a~ 2346 SOUTHWAY DRIVE ROCK HILL, SOUTH CAROLINA 29730 I-a.<.::s)O (803)329-6545 Fax# (803)329-1077 Date of Shipment: June 8, 2010 TO: Georgia Power Company Warehouse Supervisor Plant AMn W. VogUe 7821 River Road Waynesboro, GA 30830 CERTIFICATE OF gOMPUANCE Mackson, Inc. certifies that the materials furnished to you on your Purchase Order# 7092927 was processed in accordance with Mackson, Incorporated QSC# 554 Expiration Date March 15, 2012 and Quality System Manual dated May 20, 2009 Revision 12, 2nd Edition.

1) Commodity# OOOOOOOO10597-V 7/8-9 x 6- FuU Thread Stud 8 Pes.

SA193 Grade 87 Heat# 365740 Ref: T&T Enterprises, Vulcan, Charter Sleel, & Stork Lab certifications attached-5 pages.

This material is in accordance with all the requirements of Georgia Power Purchase Qrder#

7092927 and ASME Section III Class 2(NC), 1989 Edition No Addenda.

Mackson, Inc. affirms that the contents of this report are correct and accurate and that afl test results and operations that we or our subcontractors perfonn are in compliance with the material specification and the specific applicable material requirements of Section III.

10 CFR Part 21 Applies.

Tom Sharp. QA Manager June S, 2010 Date Form: Revision 4 dilled 1*14-97

.,

ItJ{)5'1 s Z. :3 tI?.:3 8001

~

R08d

'DU)t-t(.)~l.Qaalo MI tIt,OH 44130

\';-1'-'- D.

8287320G

(".n'TtmIllH!lbl Power and Services FAX 216 433 1840 CURTISS*WRIGHT FlOW CONTROL CERTIFICATION l!l Cl!ATFICAT! OF COMPUANCEICONFORIWfCI! (!] MATERIAl. l!ST REPORT I CI!AT t 72908 cut DATE: .2O-NOV.Q1 PO. !7080170 REL'

Georgia POWtI rCo. (Vogtle)

Vogtte Gone:rallng Plant 10' 128483 UNIt 1 7821 River Road IWaynetboro GoA 30830 US OTV 200EA Lor. ! 50123491 I - - !

I

!r* -..-

HEAT' 8994828 L

DRWG'i ITra:e CodtI OJA I CLJSTOCk:

10624 ITEMD!IC:

7/8"-9 UHC 2S HEAVY HEX NUT MATERW. SPECIFICATIONS:

ASUE SA-194(89)Or.2H HeAT TREAT SPECIFICATIONS Quenched and lel'l1'MtNld.. Minimum temperll'Q len,:l8rature: 850 F ASM! IPECIFICA11ONI:

ASUE SectIott II SubMctlon NC ct2 1989 Ed. no Add.

ANSIf" SPECFtCAnoNS:

AN$II ASME B1.1, 818.2.2 QUAun' IPECFlCATIONI:

Dll1'IIIlVIionallnepection perforrnacf and results al1J accaptable.

H'JO% \/iwally examined and accepted per Nova Wodc 1n8t1'ldlon 8.1.3 Rev.S which meets the '*fUlremanta at SA/A..

8t4Jru. Nx*2S00. F-788 & F-612;; Mee1IIlht applicable PQI1lona 01 tOCFASOAppendix B. ANS. N45.2 & 1OCFA21; Mt!CfWlICAL 8Pl!CtFlCA11ONS:

24 hi 1000 OEQ. F Hard FIb 98, 98, 911 Hard Rc 32 Proolload 1801 DO PSI (83tOO LB) Cone Strip 17S000 PSI (80500 LB, Macroetch: AoceptabIe ATTACHMENTS';

1031822 (MIIf). 3041826 CERT , 72tOI CERT DATE~ 20-N0Y.cr7 Pags: 1 rJ 2

As Required By The Provisions Of The ASME Code Section XI Traveler /I 10054

1. Owner Southern Nuc/ear Operating Company Date Mat. 16, 201 f

/1 p~)Ij-1l Name 40 Inverness Center Parlcway. Birmingham, AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro. GA 30830 1100864801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Name .

Maintenance Department Type Code Symbol Stamp Authorization No.

Expiration Oate N/A N/A MA Plant V0fJ!.le Address

4. Identification of System 120 I - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, ____ NI_A_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity .~2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identifioetlon Built Installed (Yes or No)

PUMP WESTINGHOUSE 10-9744035602 NIA 1-1201-P6*OO4 1995 INSTALLED YES ELECTRIC CORP.

7. Description of Work A replacement #2 seal housing was installed. The replacement #2 seal housing. SIN 2186. is a rotating spare that has previously been in service.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressure[!] Exempt[!]

Other 0 Pressure psi Test Temp. _ _ _ _ _ _ of

9. Remarks ""N:.:.o::;.;n,;.;:e'--_ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attaohed ....

CERTIFICATE OF COMPI.IANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Seotion XI.

Type Code SymbOl Stamp NIA Certificate ofAuthorization No. _ _ _ _-.-_..;.N"'/'7:4'-r_ _ _ _ _ Explration Date NlA

( \ ! . \ ( ) i.

Signed .' ;*U). ,~-~/-~, ( / \ J > ....~ Date G ( S* If f J Owner or Owner's DesI9,.nee, TItle 1 --'-_-'---'---t._ __

CERTIFICATE OF INSERVICE INSPECTION I. the undersigned. holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by _ Hartford Steam Boiler InsDBction and Insurance Co. of.Connecticut of H~ CQ!1!J!iiQ1icut have Inspected the components described in this Owner's Report during the period 5 /;u,/;;lD jl:J to I&/;ilfiabjj, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measure!ll described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measurea de!llcrlbed In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner tor any personal injury or property damage or a loss of any klnd arising from or connected with this

~ Co"",,/Oolo.. -. Jt"'a'-': '-'o-n~af"'B. aflC.a"'~jL.d-,-S-ta-te-,-P-r-o-v,-,n-ce-a-n-d""E"'n-d""'o-r-se-m-e-nt-s---

ORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Aequired By The Provisions Of The ASME Code Section XI Traveler It 10055

1. Owner Southern Nuclear Operating Company Date Maz:.31,2011 Name j}t{)f . /1

I'd 40 Inverness Center Parkway, Birmingham, AL Sheet of ot, ':;/

Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro, GA 30830 1092197601 Address RepairIReplacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp N/A Name Authorization No. NiA Plant vogt/e Expiration Date NlA Address

4. Identification of System 1208 - Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. 1//1974 Edition, Summer 1975 Addenda, ___ M_A_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add*. ~~~.~

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

NUT NOVA MACHINE NIA NlA LOT # 50043678 2005 CORRECTED YES PRODUCTS CORP HT # 7420694

7. Description of Work ......;.R,;;8.e...;'

. a,;.;c.;;,8..;,n;.;;ut.;,;;s'-o"'n.;,.;.;.;ha:::.n"'9"'e"'r._ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ __

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exemptf.!]

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~N~o:::.n~e~ _________~~~~~~~ _ _~-=_~___~~____~~-----------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements mede in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate rruthorization No. _ _ _....,,--_---'NI-?',(A='-'-1)_ _ _ _ _ _ Expiration Date NlA

, L /~ , ~. , " I \ I!\¥" (/ , {' . f(

Signed c/"f (', ;. ."'~" '_.f":, i / j 't-. <_.',.4~-.. Date ,,,-" ")

/ I Owner or Owner's Designee, Title J -=----'-=---'-

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Ggoraja and employed by Hartford Steam Boiler Insoectlon and Insurance Co. of Connecticut to c.:

of Ha;!J'M.~tiCut have inspected the components described in this Owner's Report during the period _~/~/4"'U"\

/.J.l. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this OWner's Report In accordance with the requirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty. expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~'~f£ I spectognature Commissions _-I.G.z9:Jd. __..,..J.7'-~

..-'-'(;j~D~-__:_---_-:--_____

National Board, State, Province and Endorsements Date dlo:r-~ Qlc £ l

..,. /ld55 sA.

C£ATIFICAnON lll_~:1W0P'~ [XJlMlIJIIM.1UTMPORT cau 24&51 CPT DAti: 25-Af'R.05 Po. 70lIl$111 O'MH' Co. CVOlf') **

at/fIg

/'Old PMnt -

SOl

~I 1 1~

G.A 30830 US an 200 F.A LOT' ~I

... HUT' 7.QIfAM

_ _ _ _h DfIWQ.

_,., * *' ..... v ....... _ _ ......... _..... , .. ~~ ... _ r,,,,,,,,,,_

CL.JSTOCK:

10121 naouc:

112"-13 UNC 2B HEAVY HEX NUT MATIIIW. SPEClllCA11CIN8:

ASME Sl,..194('81) Gr.!H HUT IHCIlACATION:

Ouenahed and ~. Mn/mUm ~ le/l'12'lrwtu...: 150 F AaMe'IPECIFICA'T1ON8; ASMI! SIcIIorIII ~NC eLf 'l1li Eel ncJ ~

AN. . . . . 1NCIFICA11DN8:

ANSI j ASWE .'.1,.11,3.2 QUAU1'Y 1PECFICA'I'ION8~

,cmI. \IiMIfy...,......1IId ~I*NowII ~ NP.VlS , _.15 lIIiHdI",.."" ~ 01 SNIP 814, Nk.2S00. Jl.7II& F"'12;MNI.ItMt~II(Ii'IIOI'IItOf ;OCfRflO~B.ANSI NoMI.:n 1OCFNf, CHD1IICAL III'IClP'lCATIOHIk PfDCIUCIlII'IUyIIs C.'" MN.11 fIA.Mr 8.012 SL 17 HI.01 CR." MO.02 vc:.m CU.01 CAT MN.7'2 P.OfR $.0'2 81." 1111.01 CR.OI MO.. Vc*.01CU.01 IIIICHANICAL 1fII!CIIIGA1'1OHS:

Hatd: no It Proof Load aeoo lB8 (1I0000 PSI) Cone $rio 21300 LeS (",SOOOO PSI) 24 hr UIOO OEO.F: Z' IV Hard FIb ".0 AnACtIllll!ft1a 2Q6I071; 2021114 tEAT' Z44III OIAT DATE: ZSoAP.... Page: 1 or:l

ORII~'G4 '1 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required ByThe Provisions Of The ASME Code Section XI Traveler # 10067

1. Owner Southern Nuclear Operating Company Date June 03, 2011 Name /JP{f{t/ II 40 Inverness Center Parkway, Birmingham, AL Sheet of /3 '06-1 ...

2. Plant Address Vogtle Electric Generating Plant Unit "

Name Waynesboro. GA 30830 1/0/066301 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp N!A Name Authorization No. NIA Plant Vl!fJ.lle Expiration Date N/A Address

4. Identification of System 1201 - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. /111977 Edition, Winter 1977 Addenda, NlA Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity ~_2001 ed. 2003 add.. ~----';';:';"'--

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 260 NIA H201*036*HOI6 1987 INSTALLED YES SUPPORT PRODUCTS PIPE PULLMAN POWER HEATN F88 NIA H201-036-HOI6 1990 INSTALLED YES SUPPORT PRODUCTS PADDLE

7. Description of Work AO-5503 snubber replaced to support surveillance testing.

8. Test Conducted: Hydrostatic D Pneumatic 0 Nominal Operating pressureD Exempt[!j Other D Pressure psi Test Temp. _ _ _ _ _ _ GF

9. Remarks ~N~on~e~ ___________~~~~~ __~_~~~-= __~__~__~~~_______________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCe I certify that the statement!! made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA

. ~ uthor/zalion No. Expiration Date NlA Certlficatete&o i ~ n N/A Signed' !'vv~ \.. / \ )S"L-!L(."'l Date

! J Owner or Owner's Designee, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, hoidlng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of G90rqia and employed by ~ H fi II r In inn In ~ n f Conn of. ~ J;Qrm..~ut have Inspected the components described In this Owner's Report during the period ~""'-fJ..s....,'-Gou...,I.IJ'-t to i.Ziti jIilbj{) and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

~~nJ~

~o}'ifo'=me Commissions (.,A* ZS"'Ce

--:!N':-a"'ti'-'!o=-n":"a'"'lB:::'o"'a""r""d"',"!Si<:la-te-,--:P=-r-o-v':"""in-c-e-a-n-d"'e=n-d-=-o-r-s-e-m-e-n-ts----

Date (3( .JOAn;;' r:5JOt/

UK'1U5 u'f'i) (0 l-1 ewE Fliping Materials Requisition

- NI"

'l..4AGSb I N~ 099590 '"

{)A fl~AWIf'.JG NO PEV l"'ATFFltAL CLASS rATt UN. \~v~rfV i>,JO "POJECT ct ASS 'Ie Eft£. 71L P

~iP~~~~~~~~~~~--~~ (3.,. Lfr S"""; 6",4 '/fl> I" ""',.~ "'.., ;:::l<

I t.<"'~.-

i 1>0.: .... """" ...

l l

+"'*;; ...... [3...of.:.~.:r -(""..- Ap -~, AD -{sr.., AD -=---'---,---.:..--=-_ __

i '-T. -

DESCRIPTIONlTAG NO STOCK WRHSE MA~~~IAL AST~~PEC DONO !TEM I HEAT NO.

f)- NO LOCATION USE ASME GRADE NO

~~~---,--+--~~

/V1B1+l> 18 A-')/--( E m l , ; . , _ 1 I-: --~,...,.,..._+--I:::A_I-Hf_._~ fttAD ea." ROC -tfoCO-240 (){),q F.P.JV4IiE. Itt.... IV P--:---f- J1W~~4- I<t3 ~,,-9S-

~ )\1 \ :':0 l ) - ('\ { c;;J c:.

CUtIllP P/N+1I7~ \~S~\b \.\\,\~\ ~tI-::> - \ / ...-fHtI,*

~tq (~ HO. H&lD SOLi /t1}-11:1 7'R!W$ 1Utl: !flOOD f:FtJ1OA \! Iq4 [~

I~L31 ur::Jr

~e

/';IL!I K.fT PI,..; 41104 ~N \~C':::>~\-l c.;~.s~.fl AJ-11'1

'--=.

'cAI_ I r~II'"

i ~ ~'" ~ _ ~ ttfPtJ) &q-L~"'~I~.s weE fF1V~_. z~ ,q~

I

~L('I

."'-71

@ei)A.l 71!J

'-~

. t:i..::..:L' li.f'f PIN 41oFf1 '\""~' \ ":) (.~:. \'\

~iO fi3~ri~~9~T-fflr~~~n.;w~~~:...:....1lI££~~~~.:uL:::::2I...::j4---4-~--I--+ j--jJqG: 1~~~:1 I

---+-

._"-+~

-9_

-7 1.4, /<

~:1.~l ~~~ !!~L~!()4J ~\f'00s ~ \~ c;~~~~

~l~J!~1!Q"~'TL~~~~?

I., PI, tJ \\~"\ 1lL,1_~ \~':>'"

~ ..L';---c7'-1-----1-~i-.----~--'.Qq~.--~2~?~~(j

! -lit ,0

~,D

~~I+ ~

S '"_~_-r.~57 t* ~.L~,-: 'F" ~~

l l

~\

f~ EtX..~9_~g__!'.t!QJ!!ft:. WLI.JXIt.. ,RINb 'DOl ._ 4t1~ ZZ~ FeE> "

I Fo~ /Tl:>5503 ;>1J'M55ce"*).\ ~~~\':)

-'-~'~--'"-'-"-- "--...,.,., ---------.-------~--,--------.-----.----- . i~lt "c,,"-:=:' v,~

(,II;-,1 - -'**-7~.*- ~ en, ,,. .~ .,~~,:,'t ..

/'c 5 d;'r ,0<; , <N! nA~, s - z::~::._1 ~

/0 . .

~~M4' * .u~~i<>_l.-" o~/' LU ' _ -j \, )

~2~~-L"ffad~~.__ '5- ~"~',-,--"---

(jP[i,' ~ ~- 1\lr, L ";JI[,?:pr ",or')10\l1<] qeQt.d~, ~1i)1'1 CA"JARY insrl;:aClrr r:::NJ.< *-Ce,n*r =\1': lev (;OL DfNP/)O Wait A Second And SaVl'- A Ufmime

AJxhaJU-IID. r~rtrls, m It} Ii (;;. '7 '51, .5 d I '1 '['I-,ll*. 1',\ I,...f)

£!!lit.l ua Ji._"f$lCJ~~ lAlu~~n t AZM.i!4!.tct?:1i!l!uu j A;;l!;;WW J 4t- t '}*.1It! )I$"JM.~MiJA.Q!"$~<ttRe j.4'

~P.a. 1'.\\'

A N C HOI *1/ 0 1\ n I. I N G IND., ; N C . 5664 GEORGIA POWeR COMPANY PAV-abb4 CUSTOMER PURCHASE OItOt:({ AlaI SliO,' OROER-N/4, QUANTITY OF 10 PC~.

seltlAL NO.

(SEE ATTACHED LIST FOR HAt~ER NUMGERS CERTIFICATE of CONFORMANCE DATED Januacv 12, ~~87 THIS IS TO CERTIfY THAT ALL MATERIAL IN AND EXAMINATION OF, THE COMPONENT STANDARD ~UPPORT LISTED HAVE BEEN PROCESSED IN ACCORDANCE WITH THE IDENTIFICATIon AND VERIFICATION PROGRAM ACCEPT(~ BY A.S.M.E., COVERED 8Y QUAL!TY SY~TEnS CERTrfICATION (MATERIALS) NO. ~~2~ EXPIRATIon DATE oa/31/a7 AND YOUR PURCHASE ORDER.

ff"~""'f"f"""f' IN ADDITION, THE COMPONENT STANDARD SUPPORT REfERENCED HAS BEEN SUPPL lEI) IN ACCOR DANCE !;11TH THE ANCHOR/DAHLItlC; DESIGN ~\a..

REPORT 'OR PART NO. 97600 ~~c~

!!&n ~. QUANTITY D(SC~IPTION 228 TEN {LO} 55,000 LB. FIXED END LUG MATERIAL SPECIFICATIONS:

PART DESCRIPTION /1A T(RIAL !.:.P.. NO.

fIXEI ENI LUG.. Alf3lf-71:. Grlde BD f-.!a

CERTIfICATE; 2!. COI1i'lIANC(

THIS IS TO ((RTIff THAT THE ITcns REFERENCED ABOVE HAve BEEN PRocesseD IN ACCORDANCE WITH YOUR PURCHAse ORDCH AND THE

~'77 A.S.M.C, BOILER AND PRESSURE VESSEL CODE, WINTER. L977.

ADD(NDUM.

C(IHIF[(ATIONS FOR TU( nH(RrAL LI~T(D ARE ATTACH().

T. 1.1. 0 R O.,,'J 1"1 * " .. rrP (\I: It" U f rv A f' (' " " ' A t!

O~l;G!~JJ\L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY A!s Required By The Provisions Of The ASME Code Section XI Traveler It _____1..:.0..:.0:....;17'--_ __

1. Owner Southern Nuclear Operating Company Date June 03. 2011 Name 40 Inverness Center Parkway. Birmingham. AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro. GA 30830 1101068201 Address Repair/Replacement Organization P.O. No .* Job No.* etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NfA Name Authorization No. N/A Plant Vogpe Expiration Date Address

4. Identification of System 1204 - Safety Injection System

5. (a) Applicable Construction Code ASME Sec. {// 1977 Edition, Winter 1977 Addenda, ___ M_;.'\_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity ~~2.:t.OO""1,-e",d",.....2",O",,03::uoad,,,d~'r-_

(e) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yasor No)

PIPE PULLMAN POWER 11646 NIA 1-1204-021-HOI4 1987 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work Remove snubber PSA-10, SIN 16101 per procedure 27351-C to support snubber testing.

8. Test Conducted: Hydrostatic 0 PneumaticO Nominal Operating PressureD Exempt[!]

Other 0 Pressure psi Test Temp. ______ oF

9. Remarks _N~on~e~ ____________~~~~~~~~~~-=~-= __ ~~~ __ ~~~ _______________________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp N/A Certificate 1t'uthorizstion No. . NIA Expiration Date NIA Signed i y,[\.-V-.J<--.., l f j h.~

I J:~, Date h '5 l(

! Owner or Owner's Designee, Title I v

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the slste or Province of Georgia and employed by H. d S/ am 8 i r In i f onn . ut of . H~ ~lJ.t have Inspected the components described in this Owner's Report during the period Ls...L4'J..<*c..J.....~A,.,L1 to Will /dlCiJi.. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correctlve measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neltber the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the inspector nor bis employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected wltb this In~ction.

--" ~~/~ Commissions _-:'&;!Ot!:-:')II\,-,-~Z'S-="",..4..1t..",.,--:---=---:-__--::::--:_______

il1CtOl"~ National Board. State, Province and Endorsements

t*

ORIG FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 10079

1. Owner Southern Nuclear Operating Company Date June 03, 2011 Name dJ{J!

40 Inverness Center Parkway. Birmingham. AL Sheet of /J 'r-(i;~J.If~ / (

I Address

2. Plant VogUe Electric Generating Plant Unit Name Waynesboro. GA 30830 1101068801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Deparlment Type Code Symbol Stamp NfA Name Authorization No. NIA Plant Vogtle Expiration Dale NlA

-~"~"'""---"'--

Address

4. Identification of System 1204 - SAFETY INJECTION SYSTEM

5. (a) Applicable Construction Code ASME Sec. /JI 1977 Edition, Winter 1977 Addenda, _ _N/.;.;;,;.,"',--_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ _2~OOl:!:1.Uilel:!:d,""2003=!:;!...!a~d!l:d!.:.._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 215 NlA 1* 1204*243*HOO8 1987 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work Remove snubber AD-153, SIN 223 per procedure 27353-C to support snubber testing.

8. Test Conducted: Hydrostatic 0 PneumatlcO Nominal Operating PressureD Exempt[!]

Other 0 Pressure _____ psl TestTemp. _ _ _ _ _ _ OF

9. Remarks _N~on~e~ _____________~~~~~__~~~~~~~~~~_~~~ _ _ _ _ _ _ _ _ _ _ __

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Se<:tion XI.

Type Code Symbol Stamp NlA

_ _ _ _ _/""':"-'-"_________ Expiration Date NIA Signed Date CERTiFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by rd earn Bailer In f Insuran . of onn I of ~ H~ ~t have inspected the components described In this Owner's Report during the period ~"""""""4"""""~""'1 to W:/Jjdl'>!tl. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Se<:tlon XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective meaeures described in this Owner's Report. Furthermore. neither the Inspector nor his employer shall be lIabie in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~!atJtg,LJ CommiSSions ......JM~~'-.-:,Z!::!C;w"'jIo...5~-"=""-:---=-__-:-__-:-=--:_ _ _,,,-_ __

National Board, State, Pro vi nee and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler II 10080

1. Owner Southern Nuclear Operating Company Date April 18. 2011 Name JJ/ltfl 40 Inverness Center Parkway, Birmingham, AL Sheet of t.1 O(-d't-/i Address

2. Plant VogtJe Electric Generating Plant Unit Name Waynesboro, GA 30830 1053337901 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VogUe Expiration Date NIA Address

4. Identification of System 1205 - RESIDUAL HEAT REMOVAL SYSTEM

5. (a) Applicable Construction Code ASME Sec. 1J11974 Edition. Summer 1975 Addenda, _ _N.;..;v';.;..A,--_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 307005611059 NIA 1-1205-030-H035 1987 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work Remove snubber AO-71, SIN 883 per procedure 27353-C and replace with a Model AO-71 or Lisega Model 301856RF3 to support snubber testing.

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure psi Test Temp. _ _ _ _ _ _ DF

9. Remarks ~N~on~e~ _ _ _ _ _ _ _ _~~~~~~__~~~~~-=_~~~_~~~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA

____-'='..-....:.;:;.:...:...++-____ Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georqia and employed by _._ H. team Boi er In lion and In urance Co. of n ic c.. a I fdiOILl of Hartford ~ticut have inspected the components described In this Owner's Report during the period to ' and state that to the best of my knowledge and belief, the Owner has performed exam-7in""a'-'ti~o"'n"'s"'a"'n"'d~ta~k""e-n'l correctrve measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermora. neither the Inspector nor his employer shall be liable in any mannar for any personal injury or property damage or a loss ot any kind erising from or connected with this

'~ Comml,,'o", -" ~" a'-'t~'-'o'-n"'~I-B~'~"'a"r'-4fr"',

"-S-ta-te-.-P,.-r-o-v.,.-in-c-e-a-n-d-E:-n-d-o-r-se-m-e-n-ts---

Date 21 J4bJS JD If

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _---'1...::008c::.;;;..;..7_ _ __

1. Owner Southern Nuclear Operating Company Date April 18, 2011 Name 40 Inverness Center Parkway. Birmingham. AL Sheet of Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro. GA 30830 1053338901 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by _ _:..;.M:.;;a.;..in..;.;te;.:.n;.;:B";n.;:.ce::...;;;D:.;;e,,,pa:;.rt..;:me...;;.n;...;t:...-_ Tvpe Code Symbol Stamp NlA Name Authorization No. NiA Plant Vogtle Expiration Dais _ _ _ _ _ _ _ _ _ _ _.:..:N::.,:!A.:..-_ _ _ _ __

Address

4. Identification of System 1301 - MAIN STEAM ;;t;srem

~t'AJlq (j(,*:;.HI

5. (a) Applicable Construction Code ASME Sec. /1/ 1917 Edition, 1977 Addenda, ___ NI._:4_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 305002111090 NlA 1*1301*105-H002 1981 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work Remove/replace snubber AO-5503, SIN 177 per procedure 27355-C with a Model AO-5503 or LlSEGA Model 307256RC7 to support snubber testing.

B. Test Conducted: Hydrostetic D PneumaticD Nominal Operating PressureD Exempt I!]

Other D Pressure psi Test Temp. _ _ _ _ _ _ OF

9. Remarks ~N~o~n~e~ _ _ _ _ _ _ _ _~~~~~~~~~~-=~~ ~~~ ~~~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE f certify that the statements made In the report are correct and that this conforms to the requirements of the ASME M~,~

Code,Section XI.

Type Code Symbol Stamp NlA 1f~I~~lr Certificate of Aut ------..".-...:..;:;..:..:...,A----- Expiration Date NIA Signed Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commissIon issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by H rtf ~ i r In . n ~ nn i of Ha~rd q:sn~ticut have inspectad the components described in this Owner's Report during the period <~

to (',;;:2'11 b t, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither tha Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this Inspection.

Commissions _>.:-G;~B~Jl.7,,:,Sj~t..-:-:::-:-:--::_..,-_--:,~-:- _ _ _ _ __

Nadonal Board, State, Province and Endorsements

F~r:t: INTERSTATE BOLT ~ NUT INC. SPeCIFICATIONS:

TEXAS BOLT COMPANY 1. ASME SA194 GRADE 2H

,~~J-oFL CISTOME'A P.O. 1'110. :~9:'~4 P.O. BOX 1211 2:j9~j~

HOUSTON. TEXAS 772S 1-1211 REPORT OF PHYSrCAL AND CHEMICAL TESTS T-04 REPORT MAl'I!RIAL QUANTITY 120 Deg. Cene TIM Hi n i mUl EAVY HEX NUTS

1 "-9 f-u0 1045 1 1 74,250 106,000 32/33 RC 8S0F El~vat~d T~mperat~~ Test 24 ""'s at BHN 29:]

, 1-1/2" -8 TR#8B61'..(Q+ 1045 1 1 29/30 RC 8S0F Elovated Temperat 24 h,.,,,, at F BHN 269

2-1/2"-8 TR#SB7~ 1045 1 1 2i'/28 RC 850F Elpvatp.rl Temperatute Test 24 Mrs at BHN 277 ALL MATERIAL IS OF U.

10 CFR 21 APPLIES AND S."

VISUAL EXAMINATION PE ALL MATERIAL IS MANUF EXAS BOLT OMPANY'S CONT~OL MANU CH WAS QUALIFIED, Not@: 'Sp@e No' column indicates C MI' 5. . s p Ct 1111

.46 .72 .20 .02 I .02 nOll l600 de3 F. , hour (s I iF .45 .77 mi ute e )

.24 T

.o2c;4 .01 deg F.

I mitt.,

10 1(1 Q 6015214 .46 .75 ~

.79 c:;

~

no" 5! 1600 d.~

5 F. 0 h~r'"

J M01243

45 .80 .01 dl!!!g F *

.....j Avg Ch m Check .46 .o:al .00 n oil bOO de F. . houres, '- ml 98P deg F. ~ hour!(s) ::SO minL\te(s)

V\

~.

l').

~

STATE 01' TEXAS In~p.ctor Evaluation Approv@d by; COUNTY or HARRIS W.E. WINDT NDE LEVEL III INSPECTOR ""-J I Clfltly 'M Ibwe ,.-aullS /0 be corrte( .. Conl.Nd in the records oIlhe cDI'I'Pln**

~.~L...d-

.'l'"\f"I't ,-"".,::._=._-:::-:::~~~;;..;jIll:J~!;"'___

32 Moulton Sleet Tel: (603) 52~1931 Laconia, NH 03246 Fax: (603)52~381 CERTIFICATE OF COMPLIANCE CUSTOMEA SOUTHERN NUCLEAR OPERAnNG COMPANY PAGE 1 OF 3 SUBJECT PLAiIIT voonE DATE 314199 PURCI-IASE ORDER 10384191001 FRONEKNDESHOPORDER MPN30IO SHIPMENT DATED 3/4198

-;.",;;;.,.;,.~---

IIW NO, QTY. OSSCftlPDON 1 1 FRONEK AlOE

30158 SUPPORT SLEEVE FOR AN AD-i'ao MECH. SNUBBER 2 1 FRONEK AlOE" .8.1 SEE ATTACHED TELESCOPING SLEEVE SUB-ASSEMBLY FOR AN AO-1S00 MEctfANlCAL SNUBBER 3 9 FRONEK AIDE

00112 BEARING SHAFT FOR AN AQ..1. MECH. SNUBBER 13 FRONEK AIDE

0000I x*as BEAR.ING SHAFT FOR AN AD...tO MECH. SNUBBER 5 3 FRONEK AIDE I ,J.4.Q81 BEARING SHAFT FOR AN AD*125OQ MECH. SNUBBER 6 2 FRONEK AlOE "34014 X..caA THRUST RACE FOR AN AD-1250D MECH. SNUBBER 7 1 FRONEK AI'DE

30014 X62F THRUST RACE FOR AN AD-itOa MICH. SNUBBER FRONEK AIDE. INC. hereby certi1les tnat all items supplied under the subject P.O. conform I comply with the design.

examination. testing and fabrication requirements Of the applicable code(s) and customer oontrad I speciflcafions. as listed heretn. SupportIng documents, to evidence compliance to the ASME code. have been reviewed and upon Issuance of the C of C are considered cotT1!ct and complete QA records.

COIJEfS) ASME secnoN III, SUBSECTION NF v.... 1971 Addenda WINTER 1977 10CFR50 Afp. B, 10CFR21 Coda CIISe(s)

AMAQS. REV.*

FRONEK AIDE, INC. QAM REV. 2 DATED &12119'

~~~

ASME Certificate N _ _.....N..;;-28a;;..;.;;.._ _

~ratlon Date Augu!t t, 21..

~",Aak AlCE,1J IRQ,m~______"~c~.~~!!2_~,?,,.£~"i""~~c.JZ<a -

32 Moulton Sieet Tel: (603) 528-1931 Laconia, NH 03246 Fax: (603) S28~381 CERTIFICATE OF COMPLIANCE CUSTOMER SOUTHERN NUCLEAR OPERATING COMPANY PAGE 2 OF 3 SUBJECT PLANT VOGTLE DATE 3/4119 PURCHASE ORDER 70384191001 FRONEKAIOESHOPOROER MPN30t0 SHIPMENT DATED -..;3;.;.,J~~"~_ __

ITEM NO. QIl.. OESCRIPDQIt Trace Code a 1 FRONEK AIDE II 321M S-f40 THRUST RACE FOR N4 AD..uoo MECH. SNUBBER

2 FRONEK AIDE II OOGA RACK GUIDE FOR AN AD-70 MECH. SNUBBER 10 1 FRONEK AIDE #I 32164 R-1OC BEARING LOCK FOR AN AD-6S00 MECH. SNUBBER 11 2 FRONEK AIDE 1134084 M-64 BEARING LOCK FOR AN AD-12t100 MECH. SNUBBER 14 I FRONEK AIDE. 300M BEARING SHAFT FOR AN AD-11OO MECH. SNUBBER 15 13 FRONEK AIDE

00080 S-67J BEARING SHAFT FOR AN AD-10 MECH. SNUBBER l' FRONEK AIDE "_90 TELESCOPING SLEEVE SUB-AS8EMBLY FOR SEe ATTACHED AN AD-12&OO MECHANICAL SNUBBER FRONEK AJOE. INC. hereby certifies that all items suppHed under the subjed P.O. confonn I comply with the design.

examination, testing and fabrication requirements of the applicable code(s) and customer contract I specifications. as listed herein. Supporting documents. to eYidence compliance to the ASME code, have been reviewed and upon issuance of rt1e C of C are considered correct and complete QA records.

COOE(1t) ASME SEmON III. SUSSEcnON NF Year 19n Addenda WINTER 19n 10CFRIO Ape. S, 10CFR21 Code C.eefat 8Pi!CFEAllCIN,S) AX4AQS8 REV. 6 FRONEK AIDE, INC. <JAM REV. 2 DAnD 812119'

~~-

ASME CertifICate N N-Ila ExpIration Date AuguR t. 2000

~A1A&k AIDE",J~~@~JZ"""

32 Mounon Sleet Tel: (603) 528-1931 Laconia, NH 03246 Fax: (B03) 52S-a381 CERTIFICATE OF COMPLIANCE CUSTOAtER SOUTHERN NUCLEAR OPERAnNG COMPANY P4GE 3 OF 3 SUBJECT PLANT VOGT1..E CATE 3/41911 PURCHASE ORDER 703841tlO01 FRONEKAlOE SHOP ORDER MPN30tO SHIPMENT DATED --:3:.:...14I;.;..9.;..;9~_ __

ITEM NO. Qll. DESCRIPTION Trace Code 21 21 FRONEK AIDE" 41177 HEX NUT FOR AN ADC-5600 PIPE CLAMP 22 2 FRONEK AIDE 111191. SEE ATTACHED RACK SUB-ASSEMBLY FOR AN AD-40 MECHANICAL SNUBBER 2S 1 FRONEK AIDE

96111 SEE ATTACHED BALLSCRBN8UB~SeMBLYFORAN AD-1600 MECHANICAL SNUBBER FRONEK AlOE. INC. hereby certifies ltIat all Items supplied under the subject P 0. conform I comply with Ihe design.

examination. testing and fabricaUon requirements of the applicable code(s) and customer contract J speCifications. as listed herein. Supporting documents, to evidence compliance to the ASME code, have been reviewed and upon issuance of the C ot C are considered correa and compfete QA records.

CCDl!esJ AS,.! SECTION III, SUBSECTION NF Vear 1177 Addenda WINTER 1977 10CFR50 AI?!. B, 10CFR21 Code case (5)

AX4AQII REV. 8 FRONEK AIDE. INC. QAM REV. 2 DAlEO I12119B

~~~

ASME Certificate N N-2!M3

£:)cpiratk:ln Date August 1, 2...

a:eL1J&&.;AMAQER

j)~10' 5093 CwE.

"g Materials Requisition ?L-I N! 099586 1

..0 DESCRIPTIONrTAG NO. STOCK PO NO NO, Z4t!

I ...... 1""'3 I ~ I --.- --- ~~ .* --- ---- --_.. I UI.&lW 1_ 00

___ I -- t - - PI ~- ~_ I ~

~

Ilm:~

~

c:.......- ..... """'"

~~~~~~~=-~~~~~--------------~--~~

~v '1

.... : ** ,"" * ,P II, )t ,.,,":' *** :f>l (.I",: t. '1P[ E'\I,"~e' ~O""'Ig Rl!!Qui$UIOn. CANARY -OC InspeCIOI, PlNt<-CoouaclOl GOlOENR()O-Waftnouse

~A Se<;ond And s.. A U*lrtme

I GEORGIA POWER COMPANY PAy-abb4 S-&2 eUSTOMeR' PURCHASE 6nO~fl A 101 SHOP ORO£ft SEe: BELOId N/4,QU4NTITY LISTED 8ELOW PART dEsCRIPTION SEftfAl Hb.

CERTIFICATE of CONFORMANCE

.ATE. Max 30 .. 198b SUPERSEDED THIS IS TO CERTIfY TNAT ALL "ATEIIAl IN AN. EXA"INATI'N Of.

THE C.n'ON(NT ST'NI'R' SUPPORT lIST" HAVC ICEN PROCeSSED IN

'CC'RI'lce WITH THE IICNTIfIC'TION A.I VEllfICATIO. PRO'IA" ACC('TCI I' A.I.ft.(., COVCRC. IV .UALITY 4YSTEns CERTIfICATION

'"ATCIIALS) 10 ***" CIPIIATI.N lATE 01/31/.7 AN. YOUR PURCHASE.

UK.. ~

I' ceRTIfICATE Of CO"P~IAN('

~'!:~I'~

THIS IS TO CCRTI'V THAT THE ITERI RCf'R'NCE' BELOW "AVE 8EEN PROCESSE. IN ACCOR.ANCE WITH YOUI PURCHASE OR.EI AN. THE 1'77 A.S.".E. IOIlER AN' PI'SSUIE VESSEL CODE, WINTEI 1'71, AJJE~JUM.

ceRTI'ICATIOIS fOR THE ftATEIIAl LISTE' AlE ATTACHE **

ITEft NO. 'VANTITV IESCRIPTION "ATERIAL I*'* NO.

1S& 20 pes. PIN 4],1b2 LOA]) PIN SASb4 TYPE 630 M-1{

1S& 100**pes. PIN 4111.2 " " " " " M-bJ 1S9 SO pes. PIN 4],163 " " " " " M-QC 162 9 pes. PIN 411&a " ... " " " I K- 4 171 ]'It pes* PIN 41150 " " SAL93 Gr 87 F -1::

17& 72 pes* PIN 4],047 " " SAS61t TYPE 630 M-b1 11& & pes. PIN 41.047 " " " " " 1(-45 119 ? pes. PIN 4101& ... "

... " " J-&2 17' 7& pes. PIN 41018 ... " " " " M-bO laO 21l pes. PIN 41192 ... " " " " 1'- sq l.in 5 pes. PIN 41.206 ft

" " " " (-4 201 3 pes* PIN 41032 HEX NUT SAl.'1t Gr 2H f-20 201 5.5 pes- PIN 41032 " " '1-56

~_-!34

~B~ ~~ g~~: ~~~ ~1,B)1 " " '"

" '"" ~-:l-'

>q6 202 2 pes- -i;,03~,~~ "

pnl '"

............ T. W. BROWN

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 10088

1. Owner Southern Nuclear Operating Company Date Ae.ril 20. 2011 Name 40 Inverness Center Parkway. Birmingham, AL Address Sheet of /1 ~fJ!!~~ II

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro, GA 30830 1053339301 Address Repair/Replacement Organization P.O. No., Job No., etc,

3. Work Performed by _ _;.:;Mc=a;;..in",te::;.n::;a::,;n.;:.ce::...::Dc;:ec:..e.a::;rt:.:;m.:=enc:;t,--_ Type Code Symbol Stamp NJA Name Authorization No. NIA Plant Vogtle Expiration Date _ _ _ _ _ _ _ _ _ _ _..:.N::..;A~ _ _ _ _ __

Address 4, Identification of System

"'77 W(~r ,Q17 Klc6-a\~11

5. (a) Applicable Construction Code ASME Sec. II! +fH'tt- Edition, ~mm!i f§i'5 Addenda, NIA Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 046165101015 NlA 1* 1301* 107*HOOJ 1987 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work Remove/replace snubber AD-12501 , SIN 118 per procedure 27355-C with a Model AD-12501 or LlSEGA Model 309253RF4 to support snubber testing.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt I!]

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~N.::.onc:.:e~ _________~~~~~~_~~~~~-=_~~~_~ __________________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate Of:.~thorization No. NIA .~) Expiration Date NlA cz:

'\

Signed d

/~'( ,'~

.} .\'f--*~._7--, I" / ,..../'..~. .,,.... Date

( ! Owner or Owner's Designee, Title /

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Boerd of Boiler and Pressure Vesse/lnspectors and the state or Province of Georgia and employed by Hartford Steam BOiler InsDection and Insurance Co. of Connecticut of @r.tfor\Crnecticut have Inspected the components described in this Owner's Report during the period J/t'J"i / ~c"il to ~ I.:J~ k,/.QLI, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective m~asures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By Signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this in~ection.

--=:..;:;;;;...-'-..a:=:..:r,tL-.,-f,.......,~~ii!!*::Io_:r.:::..~L1=wICL

~ nature

...~.,.::..- Commissions _-\C""'~~-4Z~.:::.IO!-'-'~~:::-:-.,--=---:-_ _-:--_ _ _ _ _ _ __

National Board, State, Province and Endorsements Date ~ <<. ;r"U Ale} .gO} l

FO M NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _---:Ic..::0c..::0.;:.90=-_ __

1. Owner Southern Nuclear Operating Company Date June 06. 2011 Name 40 Invemess Center Parkway, Birmingham. AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro. GA 30830 1101010201 Address Repair/Replacement Organizetion P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp N/A Name Authorization No. NIA Plant VogUe Expiration Date N/A Address

4. Identification of System 1301 - MAIN STEAM System

5. (a) Applicable Construction Code ASME Sec. 1111971 Edition, Winter 1917 Addenda, NIA Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _---..!2"'QQ""-'-1-"e~d"-.~20~O!>3,-,a~d~d=._~

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE PULLMAN POWER 26156 NlA 1*1301-112-HOO2 /981 INSTALLED YES SUPPORT PRODUCTS PIPE PACIFIC NIA N/A 1802009-01 1991 INSTALLED YES SUPPORT SCIENTIFIC MATL CODE#N2919D LOAD STUD PS-l

7. Description of Work Remove/replace snubber PSA-3, SIN 28343 per procedure 27351-C to support snubber testing.

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~N.;:.on~9~ ___________~~~~~__~~~~~~~~~~_~~~ ______________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

)~l Type Code Symbol Stamp Certificate of Au orizatlon No. NlA NIA Expiration Date NIA

,O~ ,/ ~,

1(0 l-?l ~.~ l /,_k)--~ lr ) ,

.~ C i l( - f(

Signed ;~ Date

{ twiner or Owner's Designee, Title I

'v CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors of to m

and the stata or Province of II G!:!Q[gi{j and employed by Hartford Steam Boiler InsDBCtion and Insurance Co. of Connecticut

~ticu( have inspected the components described in this Owner's Report during the period ~D //~ J~/r

(, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective ';easures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage Of a loss of any kind arising from or connected with this inspection.

Commissions 6--4 Z:t2~

National Board, State, Province and Endorsements

~~. Date ..2L J"o.AJ5 &to tL

HTLIK"""ch 01'11"'011

J\u,. It, 1991 c.w,la .........1' Ca. 1004410 o.t.a.N' ** 0. Ifu1dnJr

~""70J6*0l Part ......r/Daeerlr*lOl'l HCD DC J I "VOlc. Nll""

rour (4) tI/A.

-ou.ntttv SblJlP4ld Waf ""cltle SCientific, certify that the Ite. ,.uppUed 01'1 tIMI aI':Iqw. reterenced onte... co.pl, wit..b .11tbe r ... lr:wem~ of A.IIIta sect&_ In, ~io" ... al'ld Cia** I.

... . . .U ** I hrt:.. I ....t.rl.l. an ..."I&f.ct....... I JiUPPU.' in

.cconlaJ'KlWl vLtIt heUie lal.nUnc ';"... lty lIyat:_ c.rUtloat..

Nlilllber OH*' ,a. .h ** 02/.J6/"',.

"e abo certify tlht tM . .t.rl.b and f.bd~.Uon COIIPlr vita. u..

r. .

C....

'I'.....

r.'. t. of UtIlI S~lon III, l"bINctl.on II' Coda Edition aI'Id Addenda ** Usted "Iowl

\lUUd"" (.'ode Coda e.IN' ** appUe&bl.,

lin DOcIUMnUU_ ~ c~l.ted tw tllle en-del' an bel,. . .at "Uh 1d\1PMftt to tu attention ofl 01101"9'. Power Co.

, O. Do. IGOO Waynoillbara, GA )')810

_ _ _ _ _ _ _o--J

+d ASJCIItl'IOJl 111 L tl'ISIOI 1

IV.'CU(,J5 "

J!'UV:Y meg,11m TAI.~

riCO " . I'i\Q;4P 'i;;Q I'

..,hi at. dfJ' O\Inn/A,**, _ _ _ _ _ __

Dne "-7 -9l "udd

, ...C wo. Dt.crl,U_ Otr. CoM ...... 11:1.,

~ "',

~ \lO.)<<::Q ~, '~':.'l.J) .G- .J-\,i,(,,,II '# ,tJ.J.9l9-v the ~

SItE in ate * .

the lth

:1 IACIlNlICC...... cow- ............ ....

'M .......... CIIiItI **"................ , ...... '. ........ ".....

ANt 7h'I?"01)

ORiGlrJ/\L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler# _ _':. :;OO;.; ,; .9,;:;.3 _ _ __

1. Owner Southern Nuclear Operating Company Date June 22, 2011 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro, GA :M830 1101529801 Address RepairlRepJacement Organization P.O. No., Job No., etc.

3. Work Performed by _ _M=a.::..;n",te:.;.n.:;:a":,n:.::.c8=-.=D,,,e.c.p=8rlc.::mc.:::.::.en:..:.t,--_ Type Code Symbol Stamp NiA Name Authorization No. NIA Plant Vogtle Expiration Date _ _ _ _ _ _ _ _ _ _ _ _Nl._A_ _ _ _ _ __

Address

4. Identification of System 1208 - Chemical & Volume Control System

5. (a) Applicable Construction Code ASME Sec. 1111971 Edition, Winter 1972 Addenda, N/A Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity _ 2001 ed. 2003 add. .. _---'c.:::..:.'--_

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

VALVE CROSBY VALVE & N56900*00-0025 NIA lPSV8121 2011 INSTALLED YES GAGE CO.

7. Description of Work Replace relief valve 1PSV8121 to support surveillance testing.

8. Test Conducted: Hydrostatic D Pneumatic D Nominal Operating Pressure[!J ExemptD Other D Pressure _____ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~N:..:.o~n:..:;e,--_ _ _ _ _ _ _ _ _ _ _ _~~~~~~~~~~~~~~~~~__~~~_______________________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate of Authorization No. _ _ _ _ _ _-=-N/,.=.:...;:A:....-________ Expiration Date NIA Signed Owner or Owner's Deslanee, Title Date t:.h.1I,

/ r CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georqia and employed by _Ha i r In . n r. of n of H.iUJfJ;IJi ~tic!Jt have Inspected the componenta described in this Owner's Report during the period to kj;il(j40i.1. and state that to the best of my knowledge and ballef, the Owner has performed exam~ln..a~ti:-o....n'-ls...a..n""d~taro:k..e'-n correc1ive measures described in this OWner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be lieble In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this ln~s tion.

- - ~/~/,/ Commissions --:-'" z-"

~or'~ N~1:~aIB;'r. Stste, Province and Endorsements

Southern Nuclear Operating Company

1. Date Returned 2. DCP No. 3. SMR No.

Stock Material Return 0912312008 NlA {)81.:219~~ !

4. REASON FOR RETURN (Use separate SMRs for multiple items with different reasons) 5. RI~~ 6.0r~~ 1m:

Spare

~ A. Return to Stock (Provide lus\llw;:allOO .n o

comments) 8 c. Wrong material (Provide explanation)

D. WO Rework/Repair (List appropriate wo below)

N.'A-OF. External ~eworklRepair (Attach sheet explalnong work required)

B. Salvage o a. Obsolete E. ASME Section XI Rework/Repair (attach traveler) o G. Other 0 b. Broken o a. Parts Replaced 0 c. Other o b. Machining Performed Dc. Welding Performed

7. COMPLETE APPROVALS PRIOMO RETu.aw---- Ad I

Return By (Pont) Alan A Simo~,.,......-- Department Maintenance Ext.3349 I ~~~~~I: I Plant s?~n Approval:

/'

8. AdditIonal Comments: Ret6rn to warehouse as stockl Relief Valve SIN# N56900-0()..0()25 walremoYed from (PSV-8121} and tested R!r MWO. 2071960201 and found to be "SAT", No Section XI Traveler required.

NOTE: Relief Valve SIN# N56900-00-0025 is located in HOT SHOP next to test stgnd, needs to be stored in BA-68.

9. Cost Code 2071960201 :MOM

9. Description (Ta911. Heat II. Serial', Stock Number Proc. Quantity Quantity Bin Location Purchase Receipt No. RIRNo. WO Rewot1 ed etc.) Level Returned Received Order Under Relief Valve SINI SR 1 1 .K~t.f-R /y/B- IJ If /I //J*7.KK /V/AJ. NJA 10'~~~?3?8' I I~!Z~..., ri StOCk~

I bYA #1-.

f!7"~7fI1I¥'..;' I~S-ll,rIR~ed~~'1IIf),{/,u:J I~:.("/rill IDa;mU~ ~ ~~

T

"'0

~

N

~

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _ _1.; ;0.; ;0.; ;9.; ;.5_ _ __

1. Owner Southern Nuclear Operating Company Date June 09. 2011 Name 40 Inverness Center Parkway, Birmingham. AL Sheet of Address

2. Plant VogUe Electric Generating Plant Unit Name Waynesboro. GA 30830 1090009003 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance oee.aI1rnent Typ<! Code Symbol Stamp NIA Name Authorization No. NlA Plant Vogtle Expiration Date NIA Address

4. Identification of System 1208 - Chemical and Volume Control System

5. (a) Applicable Construction Code ASME Sec. III 1974 Edition, Summer 1975 Addenda, N!A Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add. ----

(cl Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed {Yes or No)

HALF CONSOLtoA TEO NIA NlA 1-1208-L4-139 1987 INSTALLED YES COUPLING POWER SUPPL Y LOTti 7550

7. Description of Work Installed 1" vent assembly to 6" line 1-1208-L4-139 (spool 139-S-07).

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt~

Other D Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks _N~on~e~ _ _ _ _ _ _ _ _~~~~~~~~~~~~-=_~~~_~~~ ____________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate of Authorization No. -------'7;.r------ EKpiration Date NIA f

Signed Date CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Geo!lJia and employed by H a Boiler I s and In "n e Ca. of nn Ii ut of . HI3J!1!~rd~l!;.lJt have inspected the components described in this OWner's Report during the period to *,;;;W;Ji:;;i: end state that to the best of my knowledge and belief. the Owner has performed exam~in"'a""'tl'-'o'-ns""'"'a:"'nOGd""ta"'k~e"'ncl corrective meaaures described in this Owner's Report In accordance with the requirements of the ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore. neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~~~-J~ Commissions ---::7"Mc;.::.~l~.s2...:=WL-"~-.,,,..--:-_---:-:-~_ _ _ __

~nature National Board, State, Province and Endorsements

CONSOLIDATED POWER SUPPLY 3556 Mary Taylor Road NUCLEAR CERTIFIED PRODUCTS Birmingham, Alabama 35235 Phone (205) 655-5515 Fax (205) 655-5511 CUSTOMER: DATE: 3/15/2010 GEORGIA POWER CO (VOGTLE)

PLANT ALVIN W VOGTLE CUSTOMER P.O. #: 7092033 7821 RIVER ROAD 651661 SALES ORDER: 6501551 o o - 1 WAYNESBORO GA 30830 THE RECORDING OF FALSE, FICTITIOUS, OR FRAUDULENT STATEMENTS OR ENTRIES ON THIS DOCUMENT MAY BE PUNISHED AS A FELONY UNDER FEDERAL STATUTES, INCLUDING FEDERAL LAW TITLE 18 CHAPTER 47 THE FOLLOWING ARE ATTACHMENTS TO THIS CPS CERTIFICATION DOCUMENT:

4 PAGE(S), CMTR(S) 2 PAGE(S), COC(S) 3 PAGE(S), LAB REPORT(S)

ATTESTED BY~

~cX tf TITLE: QA REPRESENTA Cu.. DATE: '0-/5-10 PAGE: 2 A DIVISION OF CONSOLIDATED PIPE & SUPPLY COMPANY. INC, BIRMINGHAM. AL

(

ORIGI~JAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # _ _1__0_096;...;...._ _ __

1. Owner Southern Nuclear Operating Company Date May 26, 2011 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vogtle Elootne Generating Plant Unit Name Waynesboro. GA 30830 1091737101 Address RepairlReplacement Organization P.O. No., Job No** etc.

3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant VogUe Expiration Date NlA Address

4. Identification of System 1305 - Condensate and Feedwater System

5. (a) Applicable Construction Code ASME Sec. 1111974 Edition, Summer 1975 Addenda, _ _N_!l._A_ _ Code Case (b) Applicable Edition of SectIon XI Used for RepalrlReplacement Activity 2001 ed. 2003 add....__

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

PIPE TIOGA PIPE 8630-1 NIA HT #382186 2010 INSTALLED YES SUPPL Y CO, INC

7. Description of Work Replace FAC pipe - Une 1-1305-L4-155 from branch connection at 1*1305*L4-064 to elbow downstream of construction weld 155*W -01.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating Pressure[!] ExemptD Other D Pressure NOP psi Test Temp. _ _ _ _ _ _ oF

9. Rema~s _N~on~e~________________~~~~~~~~~~-=~-= __ ~~~ __ ~~~

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Authorization No. NlA Expiration Date NIA

.....-- ('l Signed C - - :::.. L===E? Date t:::~ 2q - (/

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned. holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Ha ~ moil , Ins . n In C8. t n of Hartf~rieut have Inspected the components described In this Owner's Report during the period -J-HWII~~;.Q.~~I to '(iiI.ij.:2rul. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing thIs certltlcate neither the Inspector nor his employer makes any warranty. expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this

~

~ /~ Commissions _~&~4~Z~~"""I":-:::-:-:--::---:__-:-=--:-_ _ _ _ __

Inspector's ~ure National Boerd. State. Province and Endorsements

l O~CQ.\.g\.o 1P TIOGA PIPE SUPPLY COMPANY, INC.

1DQMORT DRIVE, EASTON, PA 18lUO

~~\(:)H.J'ld.'1~

<{ -1/ ~ /0 CUSTOMER PURCHASE ORDER CERTIFICATE OF CONFORMANCE I CMTR ATrACHI!D ATTACHED DESCRIPTION DESCRIPTION YES NO VU NO to....1Manufactums / Organlzatlona X Report of treatm9nta, ex.smlrJatlom or X

Certified Material T..t Repor1It (CMTR) .... not performed Materfa' ...nufactunml/ Organlzatkln. _farial Manufacture,. / OtganlDUona or Supplemental Certifications for X aubcontnlctors Radiographic Read."a Rl!sport X Examlnatton. anellOf' Test 1III&eria1 Manufactu ...ratOrganIzationa X ...te....1Manufaeturara I Organization. or X Subcontraeto,. CertlfIcMIon aubcontractore Radiographic FIlm CMTR from Lab Testing Inc. for MDE X Partial Dati Reports or other records for X IKIbCOnnCtad by 1'1op PIpe au."., Wltld w.ll1lJer metal pipe CMTR from Lab T..tIng lno. for Dtetructlve X TIoga PIpe Supply Co., Inc. Cet1ItIcnit X

TMtlngaubcolltract8d by 1'1cIgiI PIpe Supply of AnaIy'zM arid T_t UtlllDtlon of l.Inqllllllfled Source per NCA-3855.S X MATERIAL ORDERED: 6" SCH 120 SEAMLESS CARBON PIPE* (1) PC. 26' - 0"

1) ASME COOE SECllON 111874 EDmON SUMMER 1175 ADDENDA THROUGH 1885 EOmONiADDENDA FOR 8A335 P2Z MATERIAL.

2) ASUE CODE SECTION In 1174 EomON SUMMER 1B75 ADDENDA THROUGH 19115 EDIT10NfADDEHDA ARllCLE8 NC-2000 AND NCA-3800 FOR ClASS 2 MATERIAL.

3) COMMODITY. 84A31V Tracelbllltyj llatertal Manufactu,..... IO!'Ranizatlone:

382186 V&M nop rail'" Pipe Supply aIIInmt I1at I1a content. of 1M attached "'Porta ara comtCt IIrtd accurata, and that all ' - t and operatloM performed by nop Pipe Supply or our 8ubcontnlc:tDnt ant In compllanc. WIth the abowl stated IIIIItIIrtaIspedflcatlon and ASME CodIt a.ctIons. Tl1911111f!wtaj WIll procaMd by noga PIpe Supply In compliance wIIh our Quality SystIIms PfOGAlTI and oonfol'lM 10 the pun:h... ordar l'eqllw.m.nta. no"a PIpe Supply doeS not IHHfomr MY weld IIfPa/1& No i'I'IM:Ury, m.-cury compoundll 01' mfllT;Ury betII1tIf/ Inatrumant. .ndIor equipment""" been und In any nHIItntwwhlch cewe confIInIInIItIo TIoga PIpe Supply abides by 10CFR21 and 1QCFR50 App. B.

Quality Systam Meual RevIelon 11 Dad Il24109 CATEGORY A REFERENCE INfORMAnON "op ASME Pipe Supply Co., Inc.

CertJftcate of Authotfzadon Cu.tomer POI : 7093281 (MatertaJa) QSC: 467 1tIIm: 001 EXPIRATION DATE! 111512012 noga SOl: .usen POSI: 10

o

-roRM NiS-20WNER'S'REPO"RT FOR "R'E PAl RlREPlACEMENT AClW"ITY" ...,....

As Required By The Provisions Of The ASME Code Section XI Traveler # _ _1:.,:1.;:000=_ _ __

1. Owner Southern Nuclear Operating Company Date June 21. 2011 Name 40 Inverness Cenler Parkway. Birmingham, AL Sheet of Address

2. Plant VogUe ElectriC Generating Plant Unit Name Waynesboro, GA 30830 1092201101 Address RepairlReplaeement Organization P.O. No., Job No., etc.

3. Work Performed by Mainlenance Dee.arlment Type Code Symbol Stamp NiA Name Authorization No.

Plant Vqatle Expiration Date Address

4. Identification of System 1301 -Main Steam System

5. (a) Applicable Construction Code ASME Sec, 11/ 1974 Edition, Winter 1975 Addenda, _ _N:..:,Z,.;"A,--_ Code Case (b) Applicable Edition of Section XI Used for RepairlReplacement Actlvity_--'II209=.;1""e,.,d.."..",2""OO""3ItZad>l:d..,,._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected. ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

SAFETY CROSBY N62569-00-(X)38 NlA I-PSV-3031 1987 INSTALLED YES VALVE

7. Deaeription of Work Instal/ed ree.lacement valve. This replacement valve is a rolating spa(9, 8, Test Conducted: Hydrostatic D PneumaticD Nominal Operating Pressure[RJ Exempt 0 Other D Pressure NOP psi Test Temp. NOT OF

9. Remarks VT-2 system leakage test.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the stataments made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate of Authorization No. _ _ _ _ _ _..:..N."'YA:..:...._ _ _ _ _ _ Expiration Date NlA Signed ~ II a.. e'Lyl Owner or Owner's Designee, Title Date 'hJi; I I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georaia and employed by 0 "Ier Ins i n d r. n . of nnecti of H~ ~t!!?Mt have Inspected the components described in this Owner's Report during the period 4-,1-----J+-'.-.;lfoI~~-1 to i,/Di'WJi:iiJ: and state that to the best of my knowledge and belief, the Owner has performed examination and taken corrective measures described In this Owner's Report in accordence with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor hie employer shall be liable In any manne, for any personal lnlury or property damage or a IOS8 of any kind ariSing from or connected with this ins ectIon.

Commissions _~c£A~L..~7~iS)!."""r:~_=_:__=-_:__---:c-=--::-_ _--:'_ _ _

National Board, State, Province and Endorsements

II CJOO P CAOSIY VALVe: a GAG! COMPANY CROSBY WRENTIiAM. MASS f rI FO!U1 )IV-l FOR SAfETY AND SAFETY RELI F.F VI LVES Q.C.-440 As Required by the Provisions of the ASHE Code Rules DATA REPORT Safety and Safety Relief Valves

1. Manufactured By Crosby Valve & r.age Company, 43 KendricK St., W[eQtbam. MA 02093 Name and Addre88 Model No. HA-75-FN Order No. N64344 Contract Date 3/5/79 National Board ~-Io ..'-:::-_

Georgia Power Corp., P.O. Box 4545

2. ~nufactured For Atlanta, Georgia 30302 Order No. PAV2-54 Name and Address

1. \M1er Georgia Power Co., Alvin W. Vogtle Nuclear Plant Unit 2 Name and Address

.:.. Location of Plant Burke County, Georgia S. Valve identification 2-PSV-3034 Serial No.N62569-00-0036 Drawins No. DS-C-62S69 Rev. B Type Safety R -- 6 10

-:-_--::-;;_--=--:"'~=---:::-:-:___-_()r i f ie e 5 1ze PI pI! 5 iz e l n 1e t Ou t 1e t

'iafety. Safety Relief. PHot, ~ Inch Inch Tnch Pover: Actuated 1220 576 F

6. Set PrCS"Illre Rated Temperature Stamped Capaci ty 919226 Ibs/hr aal__ 3_tOverpressure...=-Blowdown (rslR)~of S~~_____ _

Hvdrostatic Test (psig) Inlet_.l.lo.a... {...lS_____ Outlet HiA _ __

(Arnllcable to Valves for ClQsed Syst~ms Only)

Pressure Retaining Pieces Serial Mo. Haterial Specification Identification Including Type or "rade

a. :t:1l11~ Forgings Body N92894-34-0040 ASHE SAIOS 1\vnnet N92953-33-0032 ASME SAI05 N90087-99-0366 ASHE SA193 Gr. 36

~ozzle N92S96-32-0022 ASHE SA182 n16 Dig, Insert ~92898-34-0125 ASHE SA637 Gr. 718

~29"51.r:'jZ-U022-

~;"ring WdsIH.rJ(62821-32-0038 ~92951-32-0007 U I'JS t 1 f'I!\ He) 1 tK6 364 9-2 5-002 3 N9 3.5_8 3:~5-00~ ASHE SAl93 Cr. 86 Splnele K6)6~8-31-0034 NS889S-63-0365 ASME SAl93 Cr. B6

~-~.:......:.:...-.--.----

Sprlni\ K6282l-32-0038 NX3378-31-0026 _ _

_ _ ** _ _ _ .c:.-:.~

ASTM 74

d. lid) t !n>;

t.>~ 'Jrher Pie.:cs

_..1i9lil.4-...~ .. _____.____ ___ ....:\SHE.. SAl9:Liit:.__BI_____ ._.

B(mnet ~~ut :-i88481 AS!-1E SA194 Gr. 2H

~---- __________________________________________________

. /J((jirii

-24~ __ ~~.J i

~. 1/

CERTIFICATE OF COMfL1ANCE We cert Uy that the state.lDI!nts Clade in this report are correct an.d that this valve conforms to the rules of conatruetlon of the ASHE Code fOr Nuclear Power Plant Components.Section I II, Div. I, 1974 Edition, Addenda Winter 1975

Code Case 2 --------' (DatE!)

Date shiN

SigrLed Crosby Valve & Gage Co.

(M Certificate Holded by ~

~

Our AS~ CertlfiC:3te of Authorization No. _________l_8~1_8________________to upe the___NV ______

symbol expires September 30. 1980 (Date)

CERTIFICATION OF DESIGN Design information on file at CXQsb~ Valve & r.ge Company Stress analysts report (Class I on1y) on file at,_____________________

Design specH leaHons certified byl_ _ _ _ _.;;;A:.::d=a--=I;.,.;.-..:.P=r.;;;e;;::8.;;;s~m=a.:.:n_____*___________

PE Statei:a H for~~,! _ _~:-_ _ _ _. _____--:Reg. No *_ _ _ _........ 16:.='>_....

52_ _ _._ _ _ _ __

~tras& report certified byl____________________________________________________________

I-'E lS Ignature not required - list name onty.

CERTIFICATE OF SHOP INSPECTUON 4t i, the I.m<ierslgned. holdins a valid c01llll1ssion issued by the National Board of Boller and Pressure Vessel Inspectors and the State or ProvLnce Qf ~~~Ia~s~s~a~c~h~u~s,e~~t~t~s____________________

a.nd employed by~<:tol."y ~[utual Systems* _ o f Nv['Wood. Ka~C!:c~uil.!L.!ot.l<;iL.._=""+_~--_=_=.,..,r_=

have lnspected the pump. or valve, desc~lbed 1n this Data Report on !2

.lRd state that to the best of my knoliolledge and beUef. the !of Cl:lrtlf1cate constructed this pump. or valv.!. in accordAnce wLth the ASHE Code for Nuclear l'liJnt Components.

By sIgn1ng this certificate. neither the Inspector nor his employer I'IIi1kes any warrant, expressed or lmplied. concerning the equipment described in this Data Report. Further more, neither the Inspector not' his employer shall be liable 1n any manner for any personal injury or property damage or a loss or . .m y kind arising fr01D or connec.ted with thiS inspe<.:tlon.

M~S '261~_.

(N,'lt ~ i\d ** Stat~}v . .'1nd ~o.)

JECHIEl 412

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler If. _--;'_'.;;.009,;;..;;.._ _ __

1. Owner Southem Nuclear Operating Company Date May 26, 201' Name 40 Invemess Center Parkway. Birmingham, AL Sheet of Address

2. Plant Vog/le Electric Generating Plant Unit Name Waynesboro, GA 30830 1091737101 Address RepairlReplacement Organization P.O. No., Job No.* etc.

3. Work Performed by Maintenance Dee!!.rtment Ty~ Code Symbol Stamp NlA Name Authorization No, N/A Plant Vogtle Expiration Date Address

4. Identification of System 1305 - Condensate and Feedwater System

5. (a) Applicable Construction Code ASME Sec. 1/1 1974 Edition. Summer 1975 Addenda. _---':..::.:..:......_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity ..... 2001 ed. 2003 add, (c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected. ASME Code Nemeof Name of Manufacturer Board Other Year Removed. or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STUD MACKSON, INC HT# 744072 NIA H305*PIPE 1987 CORRECTED YES NUT NOVA MACHINE HT#223422 NlA H305*PIPE 1987 CORRECTED YES PRODUCTS

7. Description of Work Replace studs/nuts on 4" flange.

8. Test CondUcted: Hydrostatic D pneumatlcD Nominal Operating PressureD Exempt[!j Other D Pressure _ _ _ _ psi Test Temp. ______ oF

9. Remarks ~N~on~e~ _ _ _ _ _ _ _ _~~~~~~~~~~-=~~ ___ __~ ~~ _____________

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Expiration Date NlA Date r) ((

\j CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesssilnspectors and the state or Province of Georgia and employed by r i I n n In n of Ht::J1. C~tiC:t have Inspected the components described In this Owner's Report during the period t o ! : ; ; i and state that to the best of my knowledge and belief, the Owner has performed examinations and taken

~

correcthie nu;asures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection, Commissions Spector's nature National Board, State. Province and Endorsements

-'-~-::-::-~1)t()~ II Y' YJ 11Q01 SheldOn ROMI MldcIIeburg Helthta. OH q-J1iJ~ S . .,.

21'2873200 C'AlIlTVnorCiIal Power and Servlcea FAX21IQS,14O CUflnss.-WAIGHT FLOW CONTROl CER11F1CAnON

(!l CEAllFICATE 0' COMPUANCEJCOtu=oRIIANCIi

.CEFlT' 85817

' ~rgla IV~G~m~~m

,Power Co. (Vogtle)

CERTDATI:22-AUa.oa

~ MATERIAL TEST R_PORT I

.":~:17OII4S'O

~_____

SO '_~'_~

-- -"---'1

____________________~

7821 River Road UN! , L-----------i

, Waynesboro GA 30830 US 1- QTY I ----

[SO EA r

_~_I:OT' 501 ..7....1 IJ_~!:'~T.+~~- ~-

. DRWG"

_ --- -.. ~

_ _ _ _ _ _ _ _~

~________________________ TracaCodeJ!~:~!_____ . _--_.==._-_~

CLJaTOCK:

10828 ffElfDEIC:

1 1/8".1 UN 28 HEAVY HeX NUT MATERIAL SPeCfFICATIOIIS:

ASME SA*194('18) Br.2H HeAT TREAT SPlCIFICA110MS Quenched and t8~. MfnimJm tempering CemperalUre: 8SO F ASME SPECIFICATIONS:

ASME Saclion 10 Subseolion NO 01.2 1989 Ed. no Add.

ANarAIME SPEClPlCAllONS:

ANSI I ASME BI.1, B18..2.2 QUAU'1"V SPECIACATIONS:

0irnItnt0I0naI iI'WpecIIon perfc:lrmed lind reIUb are IICCIf3'bIbI*.

100% vi....u, uamined lind acceptM per Nova Wc:xtc Instruction 8.1.3 R"".5 which meeII the raqulntmanla at SAlA-8'4RU. Nx-2S00. F*788 .. F-612;Meetalhe~portIonaof 10CFR50AppandlxB,ANSIH45.2a10CFR2';

CHEMICAL SNGtFICATtOHS:

Macroatch Tnt ~

-.CHAHICAL SPeClRCATJONS:

24 ht 1000 CEO F Rc 26.0 f1c3tUl AnACHMlNTS:

~7(Mm)~7B eeRT '65117 CERT DATE: 2f.AUQ.OI page: 101 I

MAC K S 0 Nt I NC 0 R P 0 RAT E 0 l.. ~'la 322ry P.O. BOX 12067 2346 SOUTHWAY DRIVE J-('-16 ROCK HILL, SOUTH CAROLINA 29730 1(JC)~~~ (S03}329-6545 Fax# (S03}329-1 077 Date of Shipment: April 20, 2010 TO: Georgia Power Company Warehouse Supervisor Plant Alvin W. VogtJe 7821 River Road Waynesboro, GA 30830 CERTIFICATE OF COltfPUANCE Mackson, Inc. certifies that the materials furnished to you on your Purchase Order# 7Q92308 was processed in acconJance with Mackson, Incorporated QSC# 554 Expiration Date March 15, 2012 and Quality System Manual dated May 20,2009 Revtsion 12, 2nd Edition.

1) Commodityl 00OOOOOO10609-V 1-1/8-8 x S" Full Thread Stud 30 Pes.

SA193 Grade B7 Heat# 744072 Heat Code "BEr Ref: T&T Enterprises certification & listed attachments. S pages This material is In acconJance with all the requirements of Georgia Power Purchase Order#

7092308 and ASME Section III Class 2(NC), 1989 Edition No Addenda.

Mackson, Inc. affirms that the contents of this report are correct and accurate and that aU test results and operations that we or our subcontractors perfonn are in compliance with the material specification and the specific applicable material requirements of Section III.

10 CFR Part 21 Applies.

Date Form: Revision 4 dlt£d 1-14-97

" ORIGINAL r:e"1J t:ll§-~ oWFJ~A;s REP6RT FOR REPAIRJREPlACEMENT ACTIVITY As Required BV The Provisions Of The ASME Code Section XI Traveler # 11011

1. Owner Southem Nuclear Operating Company ~ate May 27. 201/

Nama 40 Invemess Center Parkway, Birmingham. AL Sheet of Address

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro. GA 30830 109/960301 Address RepalrlReplacement Organization P.O. No** Job No., etc.

3. Work Performed bV Maintenance Dee.artment Type Code Symbol Stamp NlA Name Authorization No. NlA Plant Vogtle Expiration Oate NlA Address

4. Identification of System 1205 - Residual Heat Removal System

5. (a) Applicable Construction Code ASME S1C. 1111974 Edition. Summer 1975 Addenda, NlA Code Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity __ 2001 ed. 2003 add. ----

(c) Applicable Section XI Code Case(s)

6. Identification Of Componenta National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed. or Stamped Component Manufacturer Serial No. Na. Identification Built Installed (Yes or No)

STUD A&G NlA NIA HTIt646484 1986 INSTALLED YES ENGINEERING CO. CODE "COL" NUT A&G NlA NlA HT # 302050 1986 INSTALLED YES ENGINEERING Co. CODE"AB"

7. Description of Work Replacement of IB RHR Hx flange stud.

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[!]

Other 0 Pressure Test Temp. _ _ _ _ _ OF

9. Remarks VT*1 inspection of studSl:.:.:'n:::U:.::ts_-:---;,--:-:--::;:,_-:--:-_:-:::::-::-=~--:--,--:---,::---:--:- _ _ _ _ _ _ _ _ _ __

Applicable Menufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statementa made in the report are correct and that this conforms to the requirements of the ASME Code, Sectlon XI.

T~ Code Symbol Stamp NlA Certificate --~...----,;.c,:.......----- Expiration Date NlA Signed Date CflATtFICATE OF IHSERVICE tHSPEcnoH I, the Il~. holding I valid commIaa.lon ,..ued by the NetloM.l Board of Boi/a' and Pfeuure VHMllnapectora and the atlde Of Prulttnat of GeqrQt4 and employed by ". tfNttqr!:I Steam &wr /nst:?tJCtjorI 'tla fnwraDCfI Q: ~_fiatt of have I~ the components ~ in this Ownt!r'. Report during the period .... .4.......t1.....

iLJl~_"1.._1...,./...'-

to and .... tMI to the best 01 my knowledge and beI~. the Ownw hu performed lun>>natloM and ~

menutM deecrlbed In ttri& Own.,'. Report In atCOf'dance with the requirements of the ASUE CoM. SecUon XI.

By fiping ttlJ. <*1ffiC$ ~ .". 'n~ not hi. empfO)'er rna_ any WwnH'lty***prened Of IrnpUM. concerning the euminatlons and CO<<~ ~ cfaCrlbltd In this Ow.,.'. RefIGI1. FutthennOnt. neIther the InspeclOt not hie IIfftPIoVW sMU bit IIaOIe in any manner for any personal In/Ury 01' prof)erty ~ CIt

loss of any kind arllNng from ot c:onnected with this ln~.

-1 ~-

.1 ,'VIr

~ ~.1:.,.,. ....; ..." '-** ~',

-"2'" *,""~..

... * .. ~, :,...... , ,.

,. '.-~' "-', . ~,

........ <~<#.::.,:'.~ po f~ O¥ol .~:.:

.... ,~

r-bfS'3/T.3A*

co. 11. INC. ./4,.

'A & G ENGINEERING ...... - ...... -.~ ...... ~

ASME l'~"'.1tI 3BOO nt.lil PAlmS MMKED ItA 38U.6 .......

.... &l.A........

~

CCI)[

SPICIFICATlONS YENt 1974 CODE CUSS Z SUB

,,'!;", 'CtJSTOMt!.R p.o. No. Z0408 D'WI,,,t., CJ'.~

SEC.Nt TMIW WlmR AOODGJA ttM

.,~ , * "295Q 1fUCLE.M IIDOII'f OP ~ AIIOClIa1C: AL..,...,. f: ~~

, ::". ** 'A I G PACIONG LIST No. AND CD:nFlCA'nON OF COIIPUANCI 1975. t ..... tt ..

,...,.-,:r.;... *

. ~:'(~: ...

.-."- ....... , £WicII-..

&, IF!.

....... ~

== .. ..... IICI"C ~-_ _III;PSI 1'II1II

.. sa,....

c.,. 1M

~

_"l.

~;

1 1/.~1 UI(ZA) I 20 1/2 4140 20 ~1 137,100 V 11',700-,.;;; 19.... Z9S HI Il 670 e.lMIt.

STOOS A!IIE SAl93 &fI.B7 0

. ,~

.l~.3 .

.... _.") -II

. :,' 1~ING mtII * ...."i* .,.

'" '!o.""'

JOSEP ~ OAT QlJAlf rvc bNTROl

.f~.:" ",

1-~~:

l~:

~ ,1. ~-/,,.-.~

"r..: .

~~

I"~ "p'1\ ;. k '.

w't S ~-

l,OnENn ruvN.

~

_V~'

P'" ............ C v/

.... *

II 0 HI. ... 'II flA

, I 20 20 D 646484 "t.UID£-CDL *

.39 .9.

..,/

.ll .028 V v'

,030 1.00-- " .21

../ ......

~

CHMPT JMPACT TC RtSl TS f-IIC ~ TYPI -A- 10 ~ 10" $'£C)Jo IlHU !!II A37C T +32 0

MJI..LAl £IP.

~ SHE.II.RI 154M...

~

1 1/4 * ,CCI/POII . NT. .56/56/54 iiQiiij; 00 PS/.'.

f\.).;

...- ............... ~i

-I..

QSt'4" DPIArS . . 11.1_

l1li OAT IIWlIFAmJRm/sUPJuto ." ACCORDMCt IIITH COIt'.POftIM08 1WI ........ _ I I l = ..............

....,.. .....'_. . . . . . . . . * . .101....

-~

_.tI..____

"'11'" ., ......

III.~.; n......

~i

~!

."J~~,(?(eae~

G.A. I'tGR .IMf THN.AS UfOS "\.

.." ... ,-071 t:JI'<..U "t (.I <f' :.. ".: : .

AcGE 2lbr 2' " .::~ , 'ilo "" **f'~

....:r-t,IS',3 IiiA' A

G ENGINEERING CO. II. INC. . REPORT ND. 8/4166 "

..... t

. --'-- ASME SA194GR.7.NCA 3800 SEC.III CODE PARTS MARKED 'NCA 3866.6 . ....., Eo I,A PALMA AYE.

, AlMMlEIIil ~ SPECIFlCAnONS CUSTOMER P.o. No. 20408 l"'tI 110-1111 Rt:lllllN7OO YEAR 1974 CODE ClASS Z SUB SEC.1i(; THRU,.:.

A & G PACKING LIST No. 2950 NUCLIWt REPORT OF PHTIICAL AND CHEMICAL TEIT8 AND CERTIFlCAnON OF CO.PUANCE WINTER ADDENDA YEAR 1975. t,::::

o..crtotlon ....... au.mJey No Pel T.....

"th..S4O"C

..... T_

""-'t-'

YWd

!It""""' . ..

EJong RA HIIrI.tMa HeatT,..

DatIl IS i 1/4-8 UN(28) HVY HEX NUTS ASME 4140 40 1 SAl94 GR.7 -:-"':"

JOSEP t OA r Ql ALiTY CC NTROl ::;~.~:.

~r .

~ r-

, ' . AP*p*n ....... I.1f -/J--fl, ~~'

".~.:;:

W,L ~{ t:.:.*: .

A. ',f.

, ~ :~~ru ::..

11_ No. !vtsUAI. tlorI SAIiU U

..... Numb<< Mn II S P Ct NI No V C

No Tested Ac:at:Ited RelotdeCI

,138 40 ,40 0, 31)2050 HT.CODE-A8 CHARPY IMPACT TEST RESli S y-~ pre" TYf £: -A- H II 10 " SPEcr~ .....',in co A37 AT oOr I FT .LaS. SH~ ~ll.lA .UP.

18 1 1/4

COUPON HT. 302050 129/119/120 ~ ~oOi"iOO; ~oo ,/' 72/761 s ~

\.)

, ~.

~

__ . 1 ................ __ .~-.

56 ,EXPIRES JUNE 11,1988 MANUfACTURED/StIPP'- lED I" ACCORDANCE WIlli YIlt -w,a.t ... ~"' ........ _Cllft"Ct ... _ _ tlt..,..,....... ___ ~

CORP.. 1'0120408 . III*lIIIe '""'""'**'" ~ m........ II."

... CIDItf'IIIIoM __ 1ft ......................... "' ... _1MIf ~ ...

'.II!.,,!.tIe ~ -: ..

,\,

~,

'\

~.uL,.~ i. ~I( .... I O.A. MGR. .DfN nw.AsJNOS !

I

_. . "~"'-- - - ............ ~ ... ~-

,~-,-- ._.

II ;

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11014

1. Owner Southem Nuclear Operating Company Date June 2.2011 Name 40 Inverness Center Parkway, Birmingham, AL Address Sheet of

.fl~ Pjj1ty tl

2. Plant Vagtle Electric Generating Plant Unit Name Waynesboro. GA 30830 1/00/51801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Type Code Symbol Stamp NIA Name Authorization No. NlA Plant Vog.t'e Expiration Date N/A Address

4. Identification of System 1201 - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. /1/ 1971 Edition, Summer 1972 Addenda, NlA Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2903 add. --:"::';"'--

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Vear Removed,or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or Nol STUD ENERGY STEEL NPT32966*2 NlA HT # 835472 2006 INSTALLED YES

& SUPPLY Co. NPT32966-3 NPT32966-9 NPT32966*1O NPT32966-17 NPT32966-21

7. Description of Work Replacement of primary manway studs on Steam Generator 111.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exemptl!]

Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks VT-I inspection of stud.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Au!~orization No. _ _ _ _--..,_-= NlA:.:...,~ _ _ _ _ _ Expiration Date NIA Signed '~('1 ,,," ,.... t .\._~) ~f-/",-- Date C* ( ':>

pwner or Owner's Designee, Title !

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgja and employed by ___ H iI r In 'on In ran o. of n of ~jf<.ut have Inspected the components described In this Owner's Report during the period ......4-:'-...,~....:.wI'-1 to ~"0lJ. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In thIs Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the el(aminatlons and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this j~nection.

'9 ./ ~...Ht!d;fl Commissions ~~G,,:,!A:;;;x..-:-:!-7-=:!J.~ta~--::~:---_--:-=--:-_ _-:--_ _

peclor'~ture National Board, State, Province and Endorsements

,~~ ,

al\TIFICATlON ENEl\GY STEEL" StJPPLYCO.

271! rALDAN DRlVl PAGE J AUBUI\N RILLS. Ml 48316 (248) 317-4990 CERTDnCATEOYCOMPUANCE Sbip-lO: BIII*to:

Grore. Power Co. (Vogtle) Ccorp Powlr Co, Plaut Alv. W. Voa* Soutben Nuclear OperatiRi Co., Inc.

78:n RiYer kd. POBOX 1195 WayllesboN. GA 30830 8IrmIllSIl.... AL J5101 YOUR OIlDER NUMBER OUR. OIlDIR Nl1MBER DATE 7Q14171 32966 11128/06 OURITEMti- DESCRIPTION TOTAL CRAD! SPEC HEAT NUMBER Mallw.,.. Srud Assembly 21 See Data Record NPT32966-1 Your lCem 001. Commodity No: 0000000078421 V dll'OlIIh ESse Ilem No: ",""TI9554101 NPT32966*21 ESSCDwg. No: 130lA R.".2. 11088 Rev'}, IlOBC Rov.O &. 1308D ReY.I

This is to certify that die item ftlmished for your order and described above, hu been reviewed aIId ~omplies with requiremeuts ofthe applicable specifications, and meets all requirements of YO\lr purc:hw: order.

Packaging in acC(Jrdanco with ANSI N4S.:t2 level C

to CrR PART 2 t Applies

10 Cn.50 Append'~ S applies

ANSI N45.2 Apptia

The above item was supPlied in acc:ordanee with the requirements of ASME Section 1lI NB Class I 1983 Edition S\,Unmer 1984 Addenda.

ESse hl$ not performed any welding on the material described above.

To the best ofour knowledge, this material during the manufacturing proce!ses, tests and inspections has not come

into direct contact with Mercury or any or its compounds, or with 8l'ly Mercury containing devic~ employing a single boundary ofcontainment.

-The above item was supplied in ac.eordance with our Q-I Nuclear QuaUty AS$uranc:e Manual Issue No.3 Revision No.O Dated 05'04105 and our ASME NPT Certificate. of Authorization No. N2928 Expires 6/21/2001.

This Cerlifj~ aft"ums that contents of the report are correct IUd accurate and that aU test results and operations performed by Energy Steel" Sup.,ly Co. or its subcontractors are in compliance with the material specification and the specific: applicable material reqviremeats ofdie A$ME Code Seetion, Edition and Addenda referenced above, ENERGY STEEL &; SUPPLY CO.

Robert 1. Paton. Vice President, Quality Assuranct

Energy Steel & Supply Co Data Record Georgia Powet VogUe Electric Generation Pllnt Manway Stud AS$l!mbly GeOfglJ. Power Purc:twe Order' 1074 L71 atOlll. Power Item 001 - CQmmodiry No: 0000000078421 V Serial Number: NPT32966 NPT12966*21 ESSC lob # 32966 ESSe Ium No.: NPT'32966 Esse Drawing II; nOlA }!.cv.2, BOSE Rev. J, l108C Rev.O &: 13080 !\tv.!

ASME Section m- NB Class 1 19S3 Editil,lll. Summer 1984 Addenda BOM "1 Materi..t Mattrial MlC-1 I MANWAYSTUD NueorCo TJ1B89 The above materiaL'S and service's were supplied in accQrdance with O\l.f Quality Assuran" Manuallssuo 3 Rev. 0 dated 51'412005 and our ASME NPT Certificate of Authorization No.N2928 Expires 06l2} 1'2008 I Material

.Material H~tJLotNo. Material MICfI BOM~ Specification 1 ! PlOOF ROD (CO) 304 S5 MAlINA NOM AmericlD Stainless 131881

) ! INSER.T (CO) )1)4 SERIES SS (J7793/AD T.n~Meta1s 131181 The above materiaVs were supplied in tccordance with Q\I.f Q3 Quality Assurance Manual bsue No.! Revisioll No.1 Oaud 8120/96 ply Co Q.A. Approval

, . II IN AR BUILT 2006

.PO. NO. 7074171

IItJI1 .5.1'" 9 CERTIFIED BY ENERGY STEEL & SUPPLY CO.

AUBURN HILLS; M\

NPT CERTIFICATE NO. N-2.92.8

-3 AR BUILT 2006 po. NO. 7074171 .

,\

\ CERTIFIED BY ENERGY STEEL & SUPPLY CO.

AUBURN HILLS. M' NPT CERTIFICATE NO.

2006 7074171

CERTIFIED BY ENERGY STEEL & SUPPLY CO.

AUBURN HILLS. MI

. NPT CERTIFICATE NO. N-2928

,I

!"'" I ;

CERTIFIED BY

.ENERGY STEEL & SUPPLY CO.

AUBURN HILLS. MI CERTIFICATE NO. N-2.928 2006 7074171 .

FLI r....

CERTIFIED BY ENERGY STEEL & SUPPLY CO.

AUBURN HILLS. Ml T CERTIFICATE NO.

AR BUILT 2006 po. NO. 7074171 I

ORIG!f~r\L FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11015

1. Owner Southern Nuclear Operating Company Date June I, 2011 1#11

3 'JJ06'~'f-f/

Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address I

2. Plant Vogtle Electric Generating Plant Unit Name WayneSboro, GA 30830 1100/53001 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Deeartment TyPl' Code Symbol Stamp N/A Name Authorization No. NlA Plant VogJ}e Expiration Dale NlA Address

4. Identification of System 1201 - Reactor Coo/ant System

5. (a) Applicable Construction Code ASME Sec. /11 1971 Edition, Summer 1972 Addenda, _ _Nl._A_ _ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STUD ENERGY STEEL & NPT32966*4 NIA HT#835472 2006 INSTALLED YES SUPPLY CO.

7. Description of Work Repiacement of primary manway stud on Steam Generator #3.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt I:!]

Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks VT*1 inspection of stud.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA I

\4' . '. ,~.IL, Certificatertuthorizatlon No. Expiration Date NlA Signed ( ' ( k\L'- b \

, - . 'Owner or Owner"S-Wesignee, Title Q7

).,.) '-.L<....5l. Date (~. (*f/

/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of GftQ[Qia and employed bV _H§l1f.oaJ. ri.t2am f2Qilrzf Inseection gngln§urance Co, of Connecticut of Ha~~~'t!t have Inspected the components described in this Owner's Report during the period .j - Ir-.J.Okl to " a n d state that to the best of mv knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal inJury or property damage or a loss of any kind arising from or connected with this i~~ iI1Seeto ' ~ture Commissions (~& Zf~

National Board, State, PrOVince and Endorsements Date ,,2 Q i:rt.z... ~~ ...2o..t

Enngy Steel &: Suppl)l Co Data Record Georgia Power VogUe Electric Genm.nor. Plant Ma.."lW1Y Srui:1 Assembly GeorgIa Power Purchase Order: 1074171 Georgia Power Item 001 - CommodttyNo: 00001)00078421 V Serial Number; NPT32966 NPn2966-21 Esse Job II 32966 ESSC ltem No.: h'PTI2966 ESSC Drawing It: l108A'Rev.2, Hoe Rev.}, 1308C }lev.Ok l31J8D Rev.!

ASME ~ctioD. m- NB Cl.5$ 1 19U BditiOll SUII\nI.. 1984 Addenda BOM It ( Material MIel 1 f MA~AY STUD T31889 The above mAteciaVs and service/s wc:re supplied in accordance with our QU&llty Assuran\if; Man!1A1lssue 3 Re..... 0 dated 5/4/2005 and our ASME NPT Certificate of Aumorizatioll No.N292'8 Expira 0612112008.

.Material 80M#. I Materia' SpttiflCAtion BeatILotNo. I Matedal MlCf 2 i PROOF ROD (CQ) 304 SS OAAlINA I Nonh American Staitll6SS nlaB7 l ! INSE1U (CO) 104 SERIES 5S G1793/AlJ I Tallcv Metab nU18S

'The abo.... !!. materialls w~ supplied in accordanee with our Ql Quality Assurance Manual Issue No.1 Rc.. .*ision No.1 Dated 8120/96 ply Co. Q.A. Approval

~.

cl::n J IFIED BY

.ENERGY STEEL &. SUPPLY CO.

f" . AUBURN HILLS. M' CERTIFICATE NO. N-2928 T 2006 NO. 7074171

Traveler It _--:..t.:..;10:,.:1.;:.6_ _ __

,If

1. Owner Southem Nuclear OPf!rating Company Date June 1. 2011 P1.~-11 Name 40 Inverness Center Parkway, Birmingham, AL Sheet of Address

2. Plant Vqztle Electric Generating Plant UnIt Name Waynesboro. GA 30830 1100152801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Department Tvpe Code Symbol Stamp NlA Name Authorization No, NIA Plant Vagtle expiration Date NJA Address

4. Identification of System 1201 - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. 1/11971 Edition, Summer 1972 Addenda, _ _N. ...v,...

"':...-_ Code Case (b) Applicable Edition of Section XI Used for RepairIReplacement Activity 2001 ed. 2003 add, (c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STUD ENERGY STEEL & NPT32966*5 N/A HT#835472 2006 INSTALLED YES SUPPLY Co.

STUD EN£RGY STEeL & NPT32966-6 NlA HT#835472 2006 INSTALLED YeS SUPPLY co.

7. Description of Work Replacement of primary manway stud on Steam Generator #4.

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt!!]

Other 0 Pressure psi Test Temp. _ _ _ _ _ _ QF

9. Remarks VT*1 inspection o!s.::tu::,;:d:.;,._ _ _-;:---;;~:-:---;;-;;-_-:---:---;-=-:_:::--_;_:_:-_:_:_~_.:__-----------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made In the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of)rothorization No. ____-..i.~..:.NI.::.:..:A:....,.;;;;;..._ _- _ Expiration Date NlA l I Signed ,::"--4-". /'~, A "'-,, i 1\ ) ;}-,~~)~ Date (, I( !/

Owner or Owner's ~lgnae, Title I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Ggorgja and employed by Hartt S 1 In ec ion an Insurc c C. of C nn t' of ~~(;JJ.t have inspected the components described in this Owner's Report during the period s..iI+..-r...i..,...._..t.a...L....1 to (Aj""'j9M:ulo and state that to the best of my knowledge and belief, the Owner has performed axaminatlons and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connectad with Ihls inspection.

~~~atUre

! !o,oi ! ! !: ~;: : : ;i!:IiO,&:;---,-F

. . ~-;1iIl'!l'.!l.fI'I~IO.::l!::::iEiiI!ifOj"'YIi.--- Commissions National Board, State, Province and Endorsements Date Csz.L~o /'<0' L

//1)160 ~

Energy Steel & Supply Co Vaglle Data Retord Georgia Pow~r E~ectric Generation PI am Manllolt.y Stud Auembly Georgia. Po_r Pu:cr.a.se Order: 1014 t 1 \

Georgia Power 11em 001

Commodity No. COOOOOQ07842I V Serial 'Numb\i\T; l'fPT3296fH' NPT32966*21 ESSC Job II 32966 ESSe lte.tI\ No.: NPTIl966 ESSCDrawing": 130SARev.2.130SBRev.l. n08cRev.o..t IJ01IDRtv.l ASME Section In - m Class 1 1983 EdiliOl1Summer 1914 Addenda Material BOM" I Matulal HeatJLot No. Material MlC 1 I MANWA'V STUD 8l547l1M I NucorCo Tll889 The above milteriall~ and semc;o/s were supplied in accordance with our Qua.lity Assurance ManuaL Issue 3 Rev.' 0 i!ated 5/4/2005 and our AsME NJlT Certificate of Authorizaticn No.N2928 E.xpir~s 06121/2.(}08.

Material BOMl:l Material SDtcificatlol1 HeatiLot No. Material MlCf

'2 i PROOF llOP (CQ) 304 5S OAA21NA North Ameritall Stainless T3lRI7

t INSERT(CQ) 304 SEttlES SS G7793/AD Talley Metal! T3\8&8 The above materialt, were supplied. in ac: con!ance with OUT Q3 Quality Assurance Manua\lssue No.1 Revision No,1 Dated 8/20196 ply Co. QA Approval

_...:.----~=========~~" / I!7':7!!!!!

tJ (Is, 'SA.

IIIIIIII'!

I' -1 j d r

CERTIFIED BY ENERGY STEEL & SUPPLY co.

AUBURN HILLS. MI CERTIFICATE NO. N-292.8 2006 7074171

i --. .------------------------------==,

.,1 1.*,11*

d " ,!II!IJ* I 1111 _Ii II It _ _ 11:1:1 ,\PI_ IIMIIII CERTIFIED BY ENERGY STEEL & SUPPLY co.

AUBURN H'LLS. M\

NPT CERTIFICATE NO. N-2.92.8 SERIAL NO. NPT32966-6 YEAR BUlL T 2.006 C PO. NO. 7074171

INAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11017

1. Owner Southern Nuclear Operating Company Date Mar 10, 2011 Name }/p,).(

40 Invemess Center Parkway, Birmingham, At Sheet of I

/J. a,~ ;;'4- fI Address

2. Plant Vogtle Electric Generating Plant Unit Name Waynesboro. GA 30830 1100823801 Address Repair/Replacement Organization P.O, No" Job No., etc.

3. Work Performed by Maintenance Dee.artment Type Code Symbol Stamp N!A Name Authorization No. NlA Plan I Vogpe expiration Date NlA Address

4. Identification of System 1201 - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. 1/11971 Edition, Summer 1972 Addenda, _ _ 14;.;:84...;...;:-2=--_ Code Case (b) Applicable Edition of Section XI Used for Repair/Replacement Activity 2001 ed. 2003 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed. or Stamped Component Manufacturer Serial No. No. identification Built Installed (Yes or No)

STEAM WESTiNGHOUSE GAGT 1881 NlA 1-1201-86-001 1981 INSTALLED YES GENERATOR ELECTRIC CORP

7. Description of Work Installed mechanical tube plug in tube location R26-C110 (Cold Leg) and on location R26-C110 (Hot Leg).

8. Test Conducted: Hydrostatic D pneumattcD Nominal Operating PressureD Exempt I!]

Other D Pressure _ _ _ _ psi Test Temp. ______ oF

9. Remarks ....;N:.:o:::n.:::e'--_________--:_-::--:-::--::::---:--:-

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate ~ Authorization No. ~, NIA Expiration Date NlA Signed ~ (\. :).. L.0}. UJ2."", Date Owner or Owner's Designee, Title!

CERTIfiCATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the NatIonal Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by Hartford Steam Bpillilf Inspection and InSUrance Co. of Connecticut of Hartford. Connecticut have inspected the components described in this Owner's Report during the perIod .3 ~ I Z - cloIl to t. - .... - .if"¥:/, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code.Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied. concerning the examinations and corrective measures described in this Owner's Report. furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this I~ Comml.. I.," --::t"'ai""tfDC-o"-n-a:"1B=Z=~;"'r. .: f?',-=s-ta-:t-e.-:p: -r-o-v-:-in-c-e-a-n-d:-E=n-d-:-o-r-s-e-m-e-n-ts- -

11&/7 s~ 20 f! g WBITItGftOU8E PROPRIETARY CLAI8 2 /'/

O2DtOw.. II 0.... EtIcI1r:CI:ImIIInII.l&. M RWtI ~

TIIiI .......... P'QIIIItr"MII . . ., ....., 'rfool'lllllllOn _ _ ........,...,..... E.IiIIIIIIII ~ I.LC....,. . . . . ..,....

1111........ It It __ .., * ,.. III l1l1I*:. . . . II'IIIt. . . .,.. .... _ .... fill 0rIcIIIII'IIM llll111rial _ _ _ . . III ..... ...

0III11i111t0111111 . . ..,.,...1. . . WftIch._........ 1rJ J'iII'I'

.....--Ulll:.

DIll:

1. CuIitInIr MIme: 2. PIIIIIt &II: 3. ~0IdIr"'. II1II LIIIIIl_ '" 1 4* rHt.llnblr OEORGIAPOWERCO 3QRI:l VfIII/II '7GOSII'7 DIiIII: Cl1IItr.lH1

5. ri ..... OnWHIInIIr.

a.W~ CII:IW/'tII.tnIIrIr: 1.... .,. * *P,O CfNIt," PAR: ro. ........ 0..

72714. 1 JIM NIA 51....'

n, ....,** H(I); f2. Rw. t3.a...tng ...: 14.RIw': III. . . .

NIA Nil.. ~pa.) 1

~-iJ 1I.AlMEc-.. . . .

II .....

20..,.....:

11.A8E~0IM 1

21.PId~

t_......

1&. MIlE eoa E-. .... AIIIfIndI: '11. Caac..

No~ ,..

tt~ .......

.... ~ ........................ F.... 1141* t ...

23. ............. a6.HIIIt~ ac:.w.

t'fI2O. 111I2t. fn'823. I'1'I:M. tlUlU2fIC 1M 11 GIOfIOIA PCMeJIt CCIiIPAN'f

~~- ........

.u./IIIIInI: IlO'l

V ThI .................................... IIVOuIIIr.~..,Ift*A*JII ....... 1CDIiIM. ............... t*

.... ....................... ......iII8I'IlIIIIf..,

A

~

..... ~

."(;"111 .............,. ................ RImIIIII.....

JM AaE ........... fOMI(s) ....... 0 A

. A

........ CfIIC

....... c.s I.

A WA 0IIMIIIII1iII!lIIII8I TIlt . . . . . JM c.-.._RIIpart I II ..... n.t....... WA~ElK.T_ . . . . MIA .....,. . . . . . Il/IIragII. .... 1IIIIIIMt I

NIA IfrFllln.,.., ...... HrA ....... r......... MIA . . . . . BecIb c A PT ...... JM a.t,...,....T. . . . . .

II II c MIA A

w:r AIcxIIIIII U'f' RIIr.IolIifI NtA~T.........

MIA III1E PIIIIIcImeI QUIl c.t.

NIA *........"....CfIlC A

W...._ _ CfllQ TSttlllll .......

I J A ~""f*IOn ...... MfA , . . .

[: A De........ . . . , . It pallt'8

~CMD-."""''''

lNa QRiI . . . _ _

By_orONo 00IIIII:I"_ rllmI12111 f'ftIlt1l11_2.'l.

cv._'r:.No. GR

%1. Co ,f" ~.....

Clv._8N1t

!u...........

n............... _.rtI

.................. 'IIf1tI/fI1f*>>tt ...... OuIIiIIfL .

........,,1M MfA

~8iIII:IMXJ.JIIQ1 ....

~ _ illlllClllllIII"

. .AIIIIIMIe ............... 4111), "'-.IINd..." , . ~11". ~)

11'1 ...'1. . . . . . . . . . . . . .

=::.................

.....=......-----.....

c....,uo...._

m.J

. .11U.

21.~

TaII8Ig ...II....

. . .lNl ......

......,-~ ==.........'. . .

E II I . . . . . . . . . . . . .- .. . . .r ** I ". . . .

.............1CIDI,...

33..TIItIIII. . . . . . . . ,.IIII . . . . . . . . *C; . . . . . . . . .

lWQMI.1......... 31~.,ua"a. .......... AIfIE~

a_CMII>>

30. ...... ~

,..CodI......... ~'{V~II MfA e.... '

31.~

MfA

","U_, .... , i ...... -iiiii 1 aI' t

""'."'H..' .._".,''''''''li_,*~~~

......_ _ _".W s:: _~£¢ £U!I ORIGINAL

~'<? _ j! tlt1 4 HI :!'4tC~ aft!; ~ , 054 A,!U\!k m ; &

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11018

1. Owner Southern Nuclear Operating Company Date May 10, 2011 Name tJ.p.~

40 Inverness CentfJr Parkway, Birmingham, AL Sheet of [,i::. O"'.t~ . . l\

Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro, GA 30830 1100823801 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Dee.artmenl Type Code Symbol Stamp NiA Name Authorization No. NiA Plant VogUe Expiration Dale N/A Address

4. Identification of System 1201 - Reactor Coolant System

5. (a) Applicable Construction Code ASME Sec. III 1971 Edition, Summer 1972 Addenda, _ _ 14...;:84---,,-2,--_ Code Case (b) Applicable Edition of Section XI Used for RepalrlReplacement Activity _~2:!:OO~1..:!!e~d"- . ..,200~3!.;a~d~d~._ _

(c) Applicable Section XI Code Case(s)

6. Identification Of Components National Corrected, ASMECode Name of Name of Man ufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No. No. Identification Built Installed (Yes or No)

STEAM WESTINGHOUSE GAGT 1884 NiA 1-1201-86-004 1981 INSTALLED YES GENERATOR ELECTRIC CORP

7. Description of Work Installed mechanical tube plug in tube location R8-CS7 (Cold Leg) and on location R8-CS7 (Hot Leg).

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[!j Other D Pressure _ _ _ _ psi Test Temp. _ _ _ _ _ _ oF

9. Remarks ~N~on~e~ _ _ _ _ _ _ _ _~~~~~~~~_~~_-= ____ __ ~ ~~ ____________

Applicable Manufacturer'S Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Authorization No. _ _ _ _ _ _...:N.::.Y.;.;;<\~_ _ _ _ _ Expiration Date NiA Signed Date ~{ hl,It I Owner or Owner's Designei" Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission Issued by the Natlonel Board of Boller and Pressure Vessel Inspectors and the state or Province of Georaia and employed by _ Hart(. rd 9 oiler In i n I ~ n C n ic of . rw~'9!..d ~ut have Inspected the componenta described In this Owner's Report during the period '

to -I. 'd~Ji, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correct ve measures described In this Owner's Report In accordance With the requlrementa of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connectad with this

~2 lflspector'~

- ~4~..£d_ /./ Commissions 6es. 7..rc;

-=-:'N~a'7ti!"-o-nL.a~1B~oate.r-d:-,-;;S:7ta-:t-e-,P=r-o-v7in-c-e-a-:-n-d-;-;;E-n-:d-or-se-m-e-n"':'ts---

II IF

.,.IAIIrIII.......

WEITM>>tOU8I PftOPM!TMY ClA8I2 EIIIrcifItII COr/IpIIIw LtC. AI. .,....,...

If

" . . . . . . 11 . . ......,

......... 1t ......... v--

cI_...."......

h'rrall.... __ br'. ...."'*** EIIdrII: ~

IMf. .... ,.. .... _ .................................. ...

u.o ....... ........

~ at...... '1IIItIlldlrwltlcfll_ piII:MiIId IQWIIII.

1.ec..w..... 1. PllllIII: 1~0IIiIIt ..............

4*11 _ _ ....

':.=.

....,... '2.'"

GE<II:CM PQIIIIER. CO YotIt lI*A 1.. . . . . 0dIr .......... L IlJIt.RNIII 0IdIr~

1CItaI7 0.: 01411l1011 7."'. * *P.o. ON .. J 1'0........

It. PM 0.1:

mt.

u...., .......~

1

a. DIwIII HI:

H6\ NtA

14. R.w:

~

51-1117 NI\ NfA ~(CuIMJ

AllECodI _ _ ~

1 r:S' fa. A.a CaIIt-""': '7. AIMI CodI CIIiIe f ,_EiIIIIII. NI~

11*. :-~

u.a...-. .........

20. .........

,...~ . . . ._ .........F.....

21.. PII'l NIIIIIW nM11 X. MIlt IiIIIIIIIIIM: a.c.-.

IY1IG. trfI2t. J.'I8Z\ IfIrM. III I II. Lat1t GICIIIIaII\ JIICIMIIt COIIIWf't r.-w 2IMoa V

.... 1iiMauIII ........_ ........ 1IIIIIftINIIIl..,.a..I!W'......, .w........... . .* ............';1 "

_ ............................. 0..1. . . . . . . . . . . . .,."............................................

I c

A t

II D

A A

A .,.. ,

........CalC

. . . . . CIir't?

liM fIT...., .........

A pr ......

A.

_~T O\'ln--.

IIII~

NIA . . . . . .III* *n ........

.. ~8Ic.T

..........T. .-....

T..,fIiIItIaIIfdI MfA 1aEa....., . . .

. . c.tIIIIf.........

MIA \,...... c.CIlC 11M .., .".... tN. C alO

"""0 II ur ....... .. .............. a...c.rt A T1I'OIIII ,.....

II I

r A

It etnao..,,..,

~I~"""

.111... -~

A

~~O.

,......,.. ....... ........, ."..0'" %1. ::r:

[]Y. . .

QIit NIl

. . DMIIIIn ......

cv.......

.."* ..... GR .............ID CDIIIIt".vlIl"IUIDVAI:tI ,",,21

.......................,* .."... ..v..-*.,t ..... ~ . L.-~DtIit" NM.

II n-.......... t ,*

at .......... JII.2OIt1 ............

1.

2Cl\II~"...._ ... 471S).1II _ _................f t . 1'CaJIa_...... lDtIiIt

==-........

......)

Will...............

....." ..... 1 JI

........7M1I.. . . . . . .

-:-."!. ***-r::,. ~ S~I u.c....._ _..........___.......

I ....

..:.~: ~

=..__*. "

~. . .~

'1

21. . . . . . .

"IbaIIng ""11*** InC.

11.0.:

. . . fJ

*1'IIII _ _

=r:::..

_If.II . . . .***. . . . . O_~

........ . . 1010ttIIIIIDZ.

MfA

.. ..I.

Nfl

~ '~II

*, . . . , _ _ .. I 1I1 . . . . . W'MIIII.tr I JaEc........

..tt..

('MWI-1......... II...,attMDtG. ¥:IIr*...... MII!~

iillllll I......

f ..U-1,,..tO

UKllJii\JAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11024

1. Owner Southern Nuclear Operating Company Dale Mal. 13. 2011 Name dJA/.(

40 Inverness Center Parkway, Birmingham. AL Sheet of ../ I '06-;~- If Address

2. Plant Vogt/e Electric Generating Plant Unit Name Waynesboro, GA 30830 1110433101 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Oee.artment Type Code Symbol Stamp NIA Name Authorization No. NIA Plant Vogpe EXpiration Date NJA Address

4. Identification of System 1204 - SAFETY INJECTION SYSTEM

5. (a) Applicable Construction Code ASME Sec. 1111977 Edition, Winter 1977 Addenda, _---'N!.c::.:..t\'-_ Code Case (b) Applicable Edition of Section XI Used for RepalrlReplscement Activity _-=2""OO=.1:..e"'d""*....,2"'O""03"--"'s:;dd"",o_.__

(c) Applicable Section XI Code Csse(s) 6, Identificstion Of Components National Corrected, ASMECode Name of Name of Manufacturer Board Other Year Removed. or Stamped Component Manufacturer Serial No. No, Identification Built Installed (Yes or Nol PIPE PULLMAN POWER 15976 NlA 1-1204-023-HOO7 1987 INSTALLED YES SUPPORT PRODUCTS

7. Description of Work PSA-10 snubber will be replaced.

8. Test Conducted: Hydrostatic D PneumaticD Nominal Operating PressureD Exempt[!J Other D Pressure psi Test Temp. ______ oF

g. Remarks ~N~on~e~________.________~~~~~~~~~~~--~----~~--~~~-----------------------

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Authorization No. NIA Expiration Date NIA Signed (I

",te\. v~ CA9~U12.

Owner or Owner's Designee. Title I Date G;,r:3 I(

CERTIFICATE OF INSERVICE INSPECTION I, the underSigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and emplOyed by Hartford Steam Boiler Inspection and Insurancl!1 Co. of Connecticut of Haptorfi.:C0ngecticut have Inspected the components described in this OWner's Report during the period .:S - ~l:! - ..::11' t,l to ~ ~.i/O -..pOU and state that to the best of my knowledge end belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective measures described In this OWner's Report. Furthermore. neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ariSing from or connected with this i~sctlon.

~¢<l. # Commissions _~G.:~A:L..:-~lS;",-,~~::-::--=----::--_-:-=--:-_ _-:-_ __

specto~ ignatur. National Board, State. Province and Endorsements Date ,;lD ili >AII§' JO i l

FORM NtS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler # 11026

1. Owner Southern Nuclear Operating Company Name 40 Invemess Clilnter Parkway, Birmingham, At Date Sheet June 09, 2011 of 111 I :l 'c 'f)~,O Address

2. Plant Vogt/e E!ectric Generating Plant Unit Name WayneSbOro, GA 30830 1110446401 Address Repair/Replacement Organization P.O. No., Job No., etc.

3. Work Performed by Maintenance Deeartment Type Code Symbol Stamp MiA Name Authorintion No. NlA Plant Voatle Expiration Da1e NIA Address

4. Identification of System 1201 - Reactor Coolant Systlilrn Code Case 6, Identification Of Components National Corrected, ASME Code Name of Name of Manufacturer Board Other Year Removed, or Stamped Component Manufacturer Serial No, No, Identification Built Installed (Yes or No)

REACTOR COMBUSTION 8971 22004 H201-V6-001 1979 CORRECTED YES VESSEL ENGINEERING, INC

7. Description of Work Reeair small gouge on the o-ring mating surface on the Reactor Vessel Head per procedure # PCI-901349*01 and utilizing PCl's welding procedure 8 MN*GTAW.

8. Test Conducted: Hydrostatic 0 PneumatlcD Nominal Operating Pressure[g] ExemptD Other 0 Pressure psi Test Temp. _ _ _ _ _ _ oF

9. Remarks Weld surface was PT'd before and after weld repair.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NIA Certificate of Authorization No. NIA Expiration Date NIA

-rff'ff 1\

Signed -1. i1 '\./V '-J'~ \ { ~.~Q~ Date Lv I:' -If

( I Owner or Owner's Designee, Title /

,j CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holding a valid commiSSion Issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of Georgia and employed by _ HartfQtJJ. §.t!::.~m 8Q.i/(tlla.~QfJ!i.liQ!1 and.ln!i.uf~n~ QQ. Ql QQ.nn~tHt.Y1 of Hat1fQrd, Coa.necticut have inspected the components described in this Owner's Report during the period .3 - . $ * .,:c ~l to Ga - JIO - ";'lCdJ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspeelor nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

~d tSp;;to- ignature Commissions t.A - 2St:.

National Board, State, Province and Endorsements Date 20 .;x:Ut41..... .:JQI.Z

IAL Tf:ST REPORT 91'Inl79 !IOU ~',cd L t'.... f'.t ~ '<L 4 l

~\'.'~ 1'.1 ,'It ..

r\SN[ QUALITY SYSTErl C[lntflCATE (~IATER;ALS) r .:I,'pho/"! 71; 84~ :<;11.1 uurm£R N-1442 EXPIRES 7-16-82 1N ..,. &0\*(1..1;8 Tri-Kon Inc. * ",' 1"1 I;" 23668 Ala. Rd. at Uurke Cr. '-1.-/1 {" PAV2845 P.O. Box 2005 ROUle. GA 30161 01~9]-Ol 7/27/79 J/16'I X 36 11 ER308L 1---+-------+-- - . -- ._-- - - -

26901 AWS A5.9~77; ASHE Section II, Part C 907'~9'22 SFAS.9 1917 Ed; tion, SUnmer; 1979 Addend .

J .

i I .010 1. 65 .013 .008 . S2 J

4 ,, .8~

'\

Each contdincr is identified by and lot number.

- All Welding Done DeS? Using Agron Shielding Gas.

I~E CERTIFY THE ABOVE l,jATEIUAl ~IAS ~'ANUFACTURED IN ACCOROA~CE WITH TELEDYNElr.lcKAY I I\SFiE QUALITY SYSTHI PROGRAM AND TESTED TO THE REQUIREl4Erns OF NO-ZOOa M{}) ;8-'

2400, SECTION III (1977 EDITION). INCLUDING SU:~ER 1979 ADDENDA. CLASS 1 ,

COI*1PONENTS OF THE ASHE BOILER AlIO PRESSURE VESSEL CODES.:

l ;:t.

We hereby cettUy 1"..llt1e eftemlcalllla' .*nlil or tesl relulls ~tlown 11\ this report contained In ttl_ recorda ollha compllftll'. :

'f, C ;tot **

f ..... - t '

1,)

r~.:" If-,. f'"I'i,l:

, ,,,.; J.lrd~n 1....'" Y/;'~ l~"

RIGINAL FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required By The Provisions Of The ASME Code Section XI Traveler #

11027

1. Owner Southern Nuclear Operating Corr<psny ~ate June 21. 201 ,

Name 40 Inverness Center Parl(wa)j Birmingham. ,ilL Sheet of Address

2. Plant VogtJe £!ectnc Generaling Plant Unit Name Waynesooro. GA 30830 1110339701 Address RepairlReplacement Organization P.O. No., Job No., etc.

3. Work Performed by _ _M;.;.;.;;;;a;.;.in",te:.:.n:.::;a",n;:;..ce;;;..:;D.;::9fJ",a=rt.:.:m",liI=n",t_ _ Type Code Symbol Stamp NlA Name Authorization No. NJA pram Vogl/e Expiration Date _ _ _ _ _ _ _ _ _ _ _ _ N/,;...A.;...._ _ _ _ __

Address

4. Identification of System 1501- Containment Heat Removal System

5. (e) Applicable Conetruetion Code ASME Sec. 1/1 1977 Edition. Winter 1977 Addends, NiA CodeCsse (bl Applicable Edition of Section XI Used for RepairlRepla~ment Activity 2001 edt 2Q03 add.

(c) Applicable Section XI Code Case(s)

6. Identification Of Componenta National Corrected. ASMECode Name of Name of Manufacturer Board Other Year Removed, or Stamped Coml)Onent Manufacturer Serial No. No. Identification Built Installed (Yes Of' No)

STUD ENERGY & PROCESS NlA NlA HEAT 1/ 46OOJI) 2009 INSTALLED YES rYlt:lp NUT MACKSON. INC NlA NlA H£A Tit 15838JF 1993 INSTALLED YES

1. Description of Work Replaced stUds/nuts on piping flange JT-l1 shown on Dwg 1V4-1501-034-01.

8. Test Conducted: Hydrostatic D PneumatlcD Nominal Operating PressureD Exempt[!)

Other D Pressure psi Test Temp. _ _ _ _ _ _ OF

9. Remarks VT*1 examination of studs/nuts performed.

Applicable Manufacturer's Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code,Section XI.

Type Code Symbol Stamp NlA Certificate of Authorization No. NIA Expiration Date NIA Signed ~ A. ~l Owner or Owner's Designee, Title Date ,

I h.r j" CERTIFICATE OF INSERVICE INSPECTION I, the undarslgned, holdIng a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the state or Province of GeoUlia and employed by He oro Ie I Ins ti nd In ra i of Hf!."rtford Co.!Jl1!;l&lirwt have inspected the components described in this Owner's Report during the period ....~t!JU.-4'_.u.+_1 to Z /;ZyM.oH and state that to the best of my knowledge and belief, the OWner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this OWner's Report, Furthermore, neither the Inspector nor his emplo'yef' shall be liable In any manner for any personal Injury or property damaga or a loss of any kind arising from or connected with this Inspection.

~ .~~~ Commissions

~or's~e National Board, State, Province and Endorsements

4 MAC K SON, INC 0 R P 0 RAT E D P.O. BOX 12067 5025 OLD YORK ROAD ROCK HILL, SOUTH CAROLINA 29731 (B03)329-6545 TO: GEORGIA POWER COMPANY DATE OF SHIPt-tENT: Z,iarch 12, 1993 NUCLEAR OPERATIONS ATTN: MATERIALS ENGINEERING GROUP P.O. BOX 1600 WAYNESBORO, GA 30830

SUBJECT:

CERTIFICATE OF COMPLIANCE MACKSON, INC. CERTIFIES THAT THE MATERIALS FURNISHED TO YOU ON YOUR PURCHASE ORDER 70149120000 WAS PROCESSED IN ACCORDANCE WITH MACKSON INC. QSC# 554 EXPIRATION DATE 3-15-94, AND QUALITY SYSTEM MANUAL DATED 1-7-92, REVISION 1.

QUANTITY SEE ATTACHMENT ...

THIS l-fATERIAL IS IN ACCORDANCE t'HTH GEORGIA POWER POll 70149120000 AND ASME SECTION III, 1977 EDITION THRU WINTER 1977 ADDENDA.

QUALITY ASSu~ANCE MANAGER l1arch 12, 1993 DATE

M ~ C K SON, INC 0 R P 0 RAT P.O. BOX 12067 5025 OLD YORK ROAD ROCK HILL, SOUTH CAROLINA 29731 (803)329-6545 ATTACIDtENT GEORGIA POWER pol 70149120000 ITEH QUANTIIY

1) 5T# 5304000054601 5/8-11 HEAVY HEX NUT 29B4 PCS.

SA194 GR. 2H W/B695 TYPE 1 CLASS 50 GALV.

HEATH 51293 SECTION III CLASS 2 (NC)

2) ST# 5305000054602 5/8-11 X 4-1/4 FULL THREAD STUD 1500 PCS.

SA193 GR. 87 W/E695 TYPE 1 CLASS 50 GALV.

HEAT# 49210 SECTION III CLASS 1 (NE) 31 STII 5304000054603 3/4-10 HEAVY HEX NUT 1800 pes.

SA194 GR. 2H W/B695 TYPE 1 CLASS 50 GALV.

HEAT# 15838JF SECTION III CLASS 2 (NC)

4) 5TH 5305000054604 3/4-10 X 5-1/4 FULL THREAD STUD 350 PCS.

5A193 GR. B7 W/B695 TYPE 1 CLASS 50 GALV.

HEAT# 49053 SECTION III CLASS 1 (NB)

5) ST# 5305000054605 3/4-10 X 7-1/4 FULL THREAD STUD 289 PCS.

SA19J GR. 87 W/8695 TYPE 1 CLASS 50 GALV.

HEA'f# 8 oS 7 5 9 8 9 SECTION I I I CLASS 1 (NS) z

~ Energy & ~rocess ~l6q IJ:\'10 ~

W Corporatlon A FERGUSON $U88lDIAAY J - 2.0 -(J 9'

1' 45-8 Fl!nt~~o'1(: DnvQ T -,cker, GA 30084-5000 f'hOM; (770) 934-31 C1 FAX: (,nOI 938-5903 Rep!v Hl ? 0 SOl< 125 T'"ci<sr, GA 300815-0125 MATERIAL CERTIFICATION CUSTOMER: GEORGIA POWER-PLANT VOGTlE CUSTOMER PO NUMBER: 7086107 PACKING SLIP NUMBER: E256-2107 (DIReCT SHIPMENT)

DESCRIPTION:

100 EA %"-10 X 5Y: LONG TFl STUDS, MECHANICALLY ZINC COATED PER ASTM 6895 TYPE 1 CLASS 50 SA193 GRB7 HEAT: 460030 HEAT CODE BOS MFG: T&T ENTERPRISES ITEM ASME SECTION II, PART A, 2007 eOITION Based on review of supporting documentation attached, we hereby certify thal the material described abolle is in compliance with ASME Section III, Class 1, SUbsection NB. 1977 EDITION thru WINTER 1977 Addenda, of the COde and your purchase order This also affirms that the contents of this report are correct and accurate and that all test results, inspet;tions and operations performed by us or our suboontractor are in compliance with the matenal specification (inclUding dimensions) and the specific applicable material requjrements of ASME Section III Receipt inspection of direct shipped material is the respons.ibility of the customer Quality Systems CertifiCate (Malenals) Number QSC-332 meeting NCA*3800, expiring April 28, 2011 and QA Manual revision 7, dated 03/12108 apply, The provisions of 10CFR21 & 10CFR 50, APPENDIX B apply to thIS order No welding performed by EnergV & Process Corp.

DATE CC Cus~er File P*1 of Jt...

NL-11-1309, IR16 Inservice Inspection Report Summary

Contents

Text

Enclosure:

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUBJECT:

Navigation menu

NL-11-1309, IR16 Inservice Inspection Report Summary

Text

Enclosure:

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUMMARY

SUBJECT:

Navigation menu

Search