Pages that link to "PNO-I-88-009, on 880120,unusual Event Declared as Result of Worker Injured After Stepping Through Hole in Grating Between Reactor Vessel Flange & Refueling Cavity Floor.No Contamination Involved"

The following pages link to PNO-I-88-009, on 880120,unusual Event Declared as Result of Worker Injured After Stepping Through Hole in Grating Between Reactor Vessel Flange & Refueling Cavity Floor.No Contamination Involved:

Displayed 50 items.

• IR 05000220/1985013 ‎ (← links)
• IR 05000220/1985019 ‎ (← links)
• ML20137U850 ‎ (← links)
• PNO-I-86-005, on 860118,licensee Conducted Normal Reactor Shutdown After Discovering Potential for Overstressing Containment Penetration in Event of Postulated Emergency Condenser Steam Line Break.Evaluation Continuing ‎ (← links)
• IR 05000220/1985014 ‎ (← links)
• IR 05000410/1985031 ‎ (← links)
• PNO-I-88-007, on 880115,present Unplanned Outage to Inspect & Repair Feedwater Sys Components & Supports Extended for Approx 3 Wks to Perform Insp of Bushings in Reactor Vessel Flange Which Hold 6-inch Diameter Reactor Vessel Head Studs ‎ (← links)
• PNO-I-88-010, on 880120,reactor Scrammed from 42% Power Based on Low Reactor Vessel Water Level.Caused by Equipment Operator Error.Nrc Dispatched Augmented Insp Team to Site to Review Generic Safety Implications of Event ‎ (← links)
• ML20148G364 (redirect page) ‎ (← links)
• PNO-I-88-009 (redirect page) ‎ (← links)
  • PNO-I-88-009, on 880120,unusual Event Declared as Result of Worker Injured After Stepping Through Hole in Grating Between Reactor Vessel Flange & Refueling Cavity Floor.No Contamination Involved ‎ (← links)
• IR 05000410/1985048 ‎ (← links)
• PNO-I-85-082, on 851018,4 Kv nonsafety-related Electrical Breaker Exploded,Injuring Two Const Workers.Workers Taken to Hosp for Treatment.Vendor Representatives & OSHA Investigating Cause of Event ‎ (← links)
• IR 05000410/1985008 ‎ (← links)
• IR 05000410/1985006 ‎ (← links)
• IR 05000220/2005022 ‎ (← links)
• IR 05000410/1985041 ‎ (← links)
• IR 05000410/1986005 ‎ (← links)
• ML20151X586 ‎ (← links)
• ML20151U146 ‎ (← links)
• IR 05000220/1986099 ‎ (← links)
• IR 05000220/1993015 ‎ (← links)
• IR 05000220/1999004 ‎ (← links)
• ML20196E535 ‎ (← links)
• IR 05000220/1988009 ‎ (← links)
• ML20155F417 ‎ (← links)
• IR 05000220/1998014 ‎ (← links)
• IR 05000410/1986007 ‎ (← links)
• ML20199B860 ‎ (← links)
• ML20198R439 ‎ (← links)
• IR 05000220/1998015 ‎ (← links)
• IR 05000410/1987005 ‎ (← links)
• IR 05000410/1986038 ‎ (← links)
• IR 05000410/1985015 ‎ (← links)
• IR 05000220/1985003 ‎ (← links)
• ML20205A424 ‎ (← links)
• ML20205A380 ‎ (← links)
• IR 05000410/1987003 ‎ (← links)
• IR 05000410/1987007 ‎ (← links)
• IR 05000410/1986047 ‎ (← links)
• IR 05000220/1986015 ‎ (← links)
• ML20196K653 ‎ (← links)
• IR 05000220/1986024 ‎ (← links)
• IR 05000220/1986027 ‎ (← links)
• IR 05000410/1986053 ‎ (← links)
• IR 05000410/1986023 ‎ (← links)
• PNO-I-99-023, on 990411,NMP Performed Insps That Identified Indications of Crack Growth Around Portion of One of Vertical Welds.Repair Mod for Shroud Vertical Welds Is Expected to Take Approx Five Days to Complete ‎ (← links)
• IR 05000220/1988030 ‎ (← links)
• IR 05000410/1986069 ‎ (← links)
• IR 05000410/1987006 ‎ (← links)
• PNO-I-87-020, on 860311,util Informed NRC That Unique MSIV Ball Valves Will Be Replaced W/Typical BWR Y Pattern Globe Valves Due to Problems W/Prototype Testing of Ball Valves. Replacement Expected to Take 3 Months ‎ (← links)