ML22271A487

E-61283 Enclosure 4, 003a Appendix 1.4-1, Document No. DOS-19-021165-009-NPV, Version 1.0, Appendix 1.4-1 - Drawings of the FCC3 Packaging (Public)

ML22271A487
Person / Time
Site:	Orano USA
Issue date:	08/18/2022
From:	Shaw D TN International
To:	Division of Fuel Management
Garcia-Santos N
Shared Package
ML22271A128	List: ML22271A184 ML22271A186 ML22271A188 ML22271A189 ML22271A190 ML22271A354 ML22271A356 ML22271A450 ML22271A452 ML22271A454 ML22271A455 ML22271A458 ML22271A460 ML22271A461 ML22271A463 ML22271A465 ML22271A466 ML22271A468 ML22271A470 ML22271A471 ML22271A472 ML22271A474 ML22271A476 ML22271A477 ML22271A479 ML22271A481 ML22271A482 ML22271A484 ML22271A486 ML22271A487 ML22271A636 ML22271A637 ML22271A638 ML22271A639 ML22271A640 ML22271A641 ML22271A642 ML22271A643 ML22271A644 ML22271A645 ML22271A646 ML22271A647 ML22271A648 ML22271A649 ML22271A650 ML22271A675 ML22271A677 ML22271A678 ML22271A686 ML22271A688 ... further results
References
A33010, L-2022-DOT-0007
Download: ML22271A487 (2)

Text

Orano NPS Unrestricted Orano

SAFETY ANALYSIS APPENDIX 1.4-1 REPORT DRAWINGS OF THE FCC3 PACKAGING (VERSION 1)

Prepared by / signature 0 orano FCC3 Verified by / signature

Identification : DOS-19-021165-009-NPV Version : 1.0 Page 1 / 2

REFERENCE INDEX TITLE 229 K 0100N C Series 100 - Parts List 229 K 0100 H Series 100 - General unit 229 K 0101 L Series 100 - Exploitation 229 K 0102 K Series 100 - Characteristics related to the safety 229 K 0105 M Series 100 - Lower shell 229 K 0110 N Series 100 - Upper shell 229 K 0130 K Series 100 - Cradle 229 K 0145 G Series 100 - T support frame 229 K 0170 I Series 100 - Left door 229 K 0200N B Series 200 - Parts List 229 K 0200 F Series 200 - General unit 229 K 0201 J Series 200 - Exploitation 229 K 0202 I Series 200 - Characteristics related to the safety 229 K 0270 F Series 200 - Left door 229 K 0700N B Series 700 - Parts List 229 K 0700 B Series 700 - General assembly 229 K 0701 B Series 700 - Exploitation 229 K 0702 C Series 700 - Characteristics related to the safety 229 K 0715 C Series 700 - Internal equipment 229 K 0715N C Series 700 - Parts List 229 K 0745 B Series 700 - T frame 229 K 0745N B Series 700 - Parts List

Non-proprietary version Formulaire : PM04-4-MO-6E rev. 03 Unrestricted Orano Orano NPS Identification : DOS-19-021165-009-NPV Vers. 1.0 Page 2 of 2

Status of revision

English French Date Purpose and record of revisions Prepared by / Verified by version version

Old reference: DOS-13-00081779-041

0 0 04/2012 First issue Update of drawings in latest revision Update of drawings: 229 K 102, 229 K 202 and 229 K 702, following feedback from manufacturing experience 1 1 09/2012 - Modifications to maximum cavity cross-sections, from mm² to mm²;

- Modification to min. balsa wood thickness, from mm to mm;

- Addition of tolerance of +/- MPa for the balsa crush constraint, as per Chapter 1.4.

Update of drawings: 229 K 0105 and 229 K 0110 Correction:

I 2 2 10/2016 In Note 6 - Drawing 229 K 0105, replacement of 229 K 0105 by 229 K 0110 Following on from the change of seals (EURATOM):

Increase in diameter of hole, from to mm.

I New reference: DOS-19-021165-009

Update of drawings 229 K 0100, 229 K 0101, 229 K 0102, 229 K 0105, 229 K 0110, 229 K 0130:

Indication of the maximum weight of the loaded package: 4,385 kg (229 K 0100, 229 K 0101 and 229 K 0102)

Formal modifications for clarity and comprehension of the drawings (229 K 0101, 229 K 0105, 229 K 0110, 229 K 0130)

Replacement of the note relating to paint by the reference: : paint specification (229 K 0105, 229 K 0110, 229 K 0130)

Drawing 229 K 0101:

Cion of the mieight kg of the upper shell dification oftic (4,38) and hts (5,0 kg) dification ofess byand kg in dynamic lifting Addition of thaial anse as in tnspo Addition of the maimeightthel eqent kg Addif the no rela to the all dimension nod inef

+/- mm

Drawing 229 K 0102:

Modificati ofhimum emy weig: kg kg

Drawing 229 K 0105:

Addiferenceew drawings 229 K 329 K 31,29 K 3121, 229 1.0 05/2021 K 3122, 229 K 319 K29 K 3143.

1.0 Addition ks 229 K 0105 r 09nd 2105 re08 Addition of crsection J-Addition imensl and rpanf th o the flange +/- mm Addition cifnghe lengttion arms mm Addition notnceps Addition one dificationf thnceeensio mm: +/- mm mm (partial cross-section B-B) dification of paial cross-section D

Dwg 22K 01 Addition eil Addition cisr the n bo Addition eferences to ings: 215251 Addition re 03A an rep. 03B Addition of the ref 0110 item 09 dificationfs mm mm on the leg side

Drawing 229 K 0130 :

Addif precis alignmt of ing bolts fram sque Addition cisn concanufacturinaund weld S2 Uwi29 :

2.0 Se1 Integrion of weld S9inil th aftethepdating ofnical io

Non-proprietary version