ML22271A487
| ML22271A487 | |
| Person / Time | |
|---|---|
| Site: | Orano USA |
| Issue date: | 08/18/2022 |
| From: | Shaw D TN International |
| To: | Division of Fuel Management |
| Garcia-Santos N | |
| Shared Package | |
| ML22271A128 | List:
|
| References | |
| A33010, L-2022-DOT-0007 | |
| Download: ML22271A487 (2) | |
Text
Unrestricted Orano Orano NPS 0
SAFETY ANALYSIS APPENDIX 1.4-1 REPORT DRAWINGS OF THE FCC3 PACKAGING (VERSION 1)
Formulaire : PM04-4-MO-6E rév. 03 Prepared by / signature FCC3 orano Verified by / signature Identification : DOS-19-021165-009-NPV Version : 1.0 Page 1 / 2 REFERENCE INDEX TITLE 229 K 0100N C Series 100 - Parts List 229 K 0100 H Series 100 - General unit 229 K 0101 L Series 100 - Exploitation 229 K 0102 K Series 100 - Characteristics related to the safety 229 K 0105 M Series 100 - Lower shell 229 K 0110 N Series 100 - Upper shell 229 K 0130 K Series 100 - Cradle 229 K 0145 G Series 100 - T support frame 229 K 0170 I Series 100 - Left door 229 K 0200N B Series 200 - Parts List 229 K 0200 F Series 200 - General unit 229 K 0201 J Series 200 - Exploitation 229 K 0202 I Series 200 - Characteristics related to the safety 229 K 0270 F Series 200 - Left door 229 K 0700N B Series 700 - Parts List 229 K 0700 B Series 700 - General assembly 229 K 0701 B Series 700 - Exploitation 229 K 0702 C Series 700 - Characteristics related to the safety 229 K 0715 C Series 700 - Internal equipment 229 K 0715N C Series 700 - Parts List 229 K 0745 B Series 700 - T frame 229 K 0745N B Series 700 - Parts List Non-proprietary version
Formulaire : PM04-4-MO-6E rev. 03 Unrestricted Orano Orano NPS Identification : DOS-19-021165-009-NPV Vers. 1.0 Page 2 of 2 Status of revision English French Date Purpose and record of revisions Prepared by / Verified by version version Old reference: DOS-13-00081779-041 First issue 0 0 04/2012 Update of drawings in latest revision Update of drawings: 229 K 102, 229 K 202 and 229 K 702, following feedback from manufacturing experience
- Modifications to maximum cavity cross-sections, from mm² to 1 1 09/2012 mm²;
- Modification to min. balsa wood thickness, from mm to mm;
- Addition of tolerance of +/- MPa for the balsa crush constraint, as per Chapter 1.4.
Update of drawings: 229 K 0105 and 229 K 0110 Correction:
In Note 6 - Drawing 229 K 0105, replacement of 229 K 0105 by 229 K I 2 2 10/2016 0110 Following on from the change of seals (EURATOM):
Increase in diameter of hole, from to mm.
I New reference: DOS-19-021165-009 Update of drawings 229 K 0100, 229 K 0101, 229 K 0102, 229 K 0105, 229 K 0110, 229 K 0130:
Indication of the maximum weight of the loaded package: 4,385 kg (229 K 0100, 229 K 0101 and 229 K 0102)
Formal modifications for clarity and comprehension of the drawings (229 K 0101, 229 K 0105, 229 K 0110, 229 K 0130)
Replacement of the note relating to paint by the reference: : paint specification (229 K 0105, 229 K 0110, 229 K 0130)
Drawing 229 K 0101:
Correction of the maximum indicative weight of kg of the upper shell Modification of the static (4,385 kg) and dynamic weights (5,050 kg)
Modification of the stress by strand of kg in dynamic lifting Addition of the localisation of the axial and transverse arms in transport Addition of the maximum weight of the internal equipment of kg Addition of the note relating to the overall dimension not to exceed in length of
+/- mm Drawing 229 K 0102:
Modification of the maximum empty weight: kg kg Drawing 229 K 0105:
Addition of references to new drawings 229 K 3119, 229 K 3120, 229 K 3121, 229 1.0 05/2021 K 3122, 229 K 3128, 229 K 3141, 229 K 3142, 229 K 3143.
Addition of landmarks 229 K 0105 rep 09 and 229 K 0105 rep 08 1.0 Addition of cross-section J-J Addition of a positioning dimension front panel and rear panel of the shell with regard to the flange: +/- mm Addition of a dimension specifying the length of the stabilisation arms: mm Addition of a note concerning the pads Addition of exploitation detail Modification of the tolerance of the dimension mm: +/- mm mm (partial cross-section B-B)
Modification of the partial cross-section D Drawing 229 K 0110 :
Addition of detail E Addition of precision for the manufacturing for lifting boxes Addition of references to drawings: 229 K 3152, 229 K 3151 Addition of landmarks: 0110 rep. 03A and 0110 rep. 03B Addition of the reference 0110 item 09 Modification of the dimension mm mm on the leg side Drawing 229 K 0130 :
Addition of precision concerning the alignment of the swing bolts with the frame square Addition of precision concerning the manufacturing around weld S2 Update of drawing 229 K 0110:
2.0 See 1st page Integration of weld S9 new minimal length after the updating of mechanical calculation.
Non-proprietary version