ML21286A343

Amendment 29 to Updated Final Safety Analysis Report, Chapter 4, Table 4.8, Residual Heat Removal System Equipment Design Data

ML21286A343
Person / Time
Site:	Browns Ferry
Issue date:	10/04/2021
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML21286A574	List: ML21277A142 ML21286A195 ML21286A196 ML21286A197 ML21286A198 ML21286A199 ML21286A200 ML21286A201 ML21286A204 ML21286A205 ML21286A206 ML21286A210 ML21286A211 ML21286A212 ML21286A213 ML21286A216 ML21286A217 ML21286A218 ML21286A219 ML21286A220 ML21286A221 ML21286A222 ML21286A223 ML21286A224 ML21286A225 ML21286A226 ML21286A227 ML21286A229 ML21286A230 ML21286A231 ML21286A232 ML21286A233 ML21286A234 ML21286A235 ML21286A236 ML21286A237 ML21286A238 ML21286A239 ML21286A240 ML21286A241 ML21286A242 ML21286A243 ML21286A244 ML21286A245 ML21286A246 ML21286A247 ML21286A248 ML21286A249 ML21286A250 ML21286A252 ... further results
References
Download: ML21286A343 (1)

Text

BFN-28

TABLE 4.8-1

RESIDUAL HEAT REMOVAL SYSTEM EQUIPMENT DESIGN DATA

RHRS PUMPS

Number Installed per Unit - 4 Design Temperature - 350F Capacity/Pump - 50% (LPCI) Design pressure - 450 psig Shutoff Head - 780 ft

Design Conditions/Pump 0 psid*

Discharge Flow (gpm) 20,000 (2 in one loop) 10,800 (1 in one loop) Units 1, 2, 3

Rated Pump Capacity 10,000 gpm at 560 ft Total Dynamic Head NPSH Required at 90F (ft) 30 Operating Conditions/Pump Discharge Flow (gpm) 0-12,000 Discharge Head (ft) 780-420 Differential Pressure (psid) 295-0 NPSH Required at 90F (ft) 30-34

RHRS HEAT EXCHANGERS

Number Installed per Unit - 4 Shell Side Fluid - Reactor Water or Pressure Suppression Pool Water Tube Side Fluid - RHR Service Water (River Water)

Shell and Tube Side Design Pressure - 450 psig and Design Temperature 40-350F Pressure Drop Design Conditions - shell side 10 psi

- tube side 6 psi

Suppression Pool Cooling Analysis (3952 MWt) - ANS/ANSI 5.1 (with 2 uncertainty)

DBA LOCA Analysis:

Shell Side Flow (gpm) 6500 Inlet Temperature Shell Side (F) 179.0 Heat Exchanger Duty (Btu/hr) 80,136,000 Tube Side Flow (gpm) 4000 Inlet Temperature Tube Side (F) 95ºF Heat Exchanger K-factor 265 BTU/sec-ºF

Limiting NFPA 805 (fire) event

Shell Side Flow (gpm) 7500 Inlet Temperature Shell Side (F) 207.7 Heat Exchanger Duty (Btu/hr) 124,966,800 Tube Side Flow (gpm) 4500 Inlet Temperature Tube Side (F) 88.0ºF Heat Exchanger K-factor 290 BTU/sec-ºF

• psid - pounds per square inch difference between reactor vessel and drywell.