ML21286A342

Amendment 29 to Updated Final Safety Analysis Report, Chapter 4, Table 4.9, Reactor Water Cleanup System Equipment Design Data

ML21286A342
Person / Time
Site:	Browns Ferry   (DPR-033, DPR-052, DPR-068)
Issue date:	10/04/2021
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML21286A574	List: ML21277A142 ML21286A195 ML21286A196 ML21286A197 ML21286A198 ML21286A199 ML21286A200 ML21286A201 ML21286A204 ML21286A205 ML21286A206 ML21286A210 ML21286A211 ML21286A212 ML21286A213 ML21286A216 ML21286A217 ML21286A218 ML21286A219 ML21286A220 ML21286A221 ML21286A222 ML21286A223 ML21286A224 ML21286A225 ML21286A226 ML21286A227 ML21286A229 ML21286A230 ML21286A231 ML21286A232 ML21286A233 ML21286A234 ML21286A235 ML21286A236 ML21286A237 ML21286A238 ML21286A239 ML21286A240 ML21286A241 ML21286A242 ML21286A243 ML21286A244 ML21286A245 ML21286A246 ML21286A247 ML21286A248 ML21286A249 ML21286A250 ML21286A252 ... further results
References
Download: ML21286A342 (1)

Text

BFN-23 TABLE 4.9-1 REACTOR WATER CLEANUP SYSTEM EQUIPMENT DESIGN DATA MAIN CLEANUP RECIRCULATION PUMPS Number Required:.............................. 2 Design Temperature (°F):................... 150 Capacity (each):............................. 50%

Design Pressure (psig):..................... 1300 Discharge Flow (gpm/pump):.......... 180 Discharge Head at Rated Flow (ft):..... 500 HEAT EXCHANGERS Regenerative Nonregenerative Reactor Coolant Flow Rate (lb/hr) 133,000/187,530*

133,000/187,530*

Shell Side Pressure (psig) 1,450 150 Shell Side Temperature (°F) 575 370 Tube Side Pressure (psig) 1,450 1,450 Tube Side Temperature (°F) 575 575 FILTER-DEMINERALIZERS Number Required:.................................... 2 Design Temperature (°F):.......... 150 Capacity (each):.................................. 50%

Design Pressure (psig):........... 1450 Flow Rate/Unit (lb/hr):........ 66,650/93,765*

Effluent Conductivity (mmho max):........ 0.1 Effluent pH:.................................. 6.5 to 7.5 Effluent Insolubles (ppb-measured as residue on 0.45 micron filter paper):.................................................. <10

• Lower mass flow rate corresponds to the maximum flow of 270 gpm. Higher mass flow rate corresponds to the maximum flow of 340 gpm. Operation of RWCU above 270 gpm depends upon the ability of RBCCW to accommodate the added heat load.