ML12233A730
ML12233A730 | |
Person / Time | |
---|---|
Site: | Indian Point ![]() |
Issue date: | 08/20/2012 |
From: | Daily J License Renewal Projects Branch 2 |
To: | Heacock D Dominion Energy Kewaunee |
SECY RAS | |
References | |
RAS 23331, 50-247-LR, 50-286-LR, ASLBP 07-858-03-LR-BD01 | |
Download: ML12233A730 (9) | |
Text
ENT000558 Submitted: August 20, 2012 March 11, 2010 Mr. David A. Heacock President and Chief Nuclear Officer Dominion Energy Kewaunee, Inc.
Innsbrook Technical Center - 2SW 5000 Dominion Blvd.
Glen Allen, VA 23060-6711
SUBJECT:
REQUEST FOR ADDITIONAL INFORMATION FOR THE REVIEW OF THE KEWAUNEE POWER STATION LICENSE RENEWAL APPLICATION (TAC NO. MD9408)
Dear Mr. Heacock:
By letter dated August 12, 2008, Dominion Energy Kewaunee, Inc. (Dominion), submitted an application for renewal of operating license DPR-43 for the Kewaunee Power Station. The staff of the U.S. Nuclear Regulatory Commission (NRC or the staff) is reviewing this application in accordance with the guidance in NUREG-1800, Standard Review Plan for Review of License Renewal Applications for Nuclear Power Plants. During its review, the staff has identified areas where additional information is needed to complete the review. The staffs requests for additional information are included in the enclosure. Further requests for additional information may be issued in the future.
Items in the enclosure were discussed with Paul Aitken, of your staff, and a mutually agreeable date for the response is within 30 days from the date of this letter. If you have any questions, please contact me by telephone at 301-415-3873 or by e-mail at John.Daily@nrc.gov.
Sincerely,
/RA/
John Daily, Sr. Project Manager Project Operations Branch Division of License Renewal Office of Nuclear Reactor Regulation Docket No. 50-305
Enclosure:
As stated cc w/encl: See next page
March 11, 2010 Mr. David A. Heacock President and Chief Nuclear Officer Dominion Energy Kewaunee, Inc.
Innsbrook Technical Center - 2SW 5000 Dominion Blvd.
Glen Allen, VA 23060-6711
SUBJECT:
REQUEST FOR ADDITIONAL INFORMATION FOR THE REVIEW OF THE KEWAUNEE POWER STATION LICENSE RENEWAL APPLICATION (TAC NO. MD9408)
Dear Mr. Heacock:
By letter dated August 12, 2008, Dominion Energy Kewaunee, Inc. (Dominion), submitted an application for renewal of operating license DPR-43 for the Kewaunee Power Station. The staff of the U.S. Nuclear Regulatory Commission (NRC or the staff) is reviewing this application in accordance with the guidance in NUREG-1800, Standard Review Plan for Review of License Renewal Applications for Nuclear Power Plants. During its review, the staff has identified areas where additional information is needed to complete the review. The staffs requests for additional information are included in the enclosure. Further requests for additional information may be issued in the future.
Items in the enclosure were discussed with Paul Aitken, of your staff, and a mutually agreeable date for the response is within 30 days from the date of this letter. If you have any questions, please contact me by telephone at 301-415-3873 or by e-mail at John.Daily@nrc.gov.
Sincerely,
/RA/
John Daily, Sr. Project Manager Project Operations Branch Division of License Renewal Office of Nuclear Reactor Regulation Docket No. 50-305
Enclosure:
As stated cc w/encl: See next page DISTRIBUTION:
See next page ADAMS Accession Number: ML100690399 OFFICE PM:RPOB:DLR LA:RPOB:DLR BC:RPOB:DLR PM:RPB1:DLR NAME JDaily SFigueroa JRobinson JDaily (Signature)
DATE 3/11/10 3/10/10 3/11/10 3/11/10 OFFICIAL RECORD COPY
Letter to David A. Heacock from John Daily dated March 11, 2010
SUBJECT:
REQUEST FOR ADDITIONAL INFORMATION FOR THE REVIEW OF THE KEWAUNEE POWER STATION LICENSE RENEWAL APPLICATION (TAC NO. MD9408)
DISTRIBUTION:
HARD COPY:
DLR RF E-MAIL:
PUBLIC RidsNrrDlr Resource RidsNrrDlrRpb1 Resource RidsNrrDlrRpb2 Resource RidsNrrDlrRerb Resource RidsNrrDlrRpob Resource RidsNrrDlrRer1 Resource RidsNrrDlrRer1 Resource RidsNrrDciCvib Resource RidsNrrDciCpnb Resource RidsNrrDraAfpb Resource RidsNrrDeEmcb Resource RidsNrrDeEeeb Resource RidsNrrDssSrxb Resource RidsNrrDssSbpb Resource RidsNrrDssScvb Resource RidsOgcMailCenter Resource
_ _ _ _ _ _ __
J. Daily D. Doyle P. Tam S. Burton K. Barclay M. Kunowski V. Mitlyng I. Couret S. Burton P. Higgins J. Medoff J. Dozier
Kewaunee Power Station cc:
Resident Inspectors Office Mr. Paul C. Aitken U.S. Nuclear Regulatory Commission Supervisor - License Renewal Project N490 Hwy 42 Innsbrook Technical Center - 3NE Kewaunee, WI 54216-9510 5000 Dominion Boulevard Glen Allen, VA 23060-6711 Mr. Chris L. Funderburk Director, Nuclear Licensing and Mr. David A. Sommers Operations Support Supervisor - Nuclear Engineering Dominion Resources Services, Inc. Innsbrook Technical Center - 2SE Innsbrook Technical Center - 2SE 5000 Dominion Boulevard 5000 Dominion Boulevard Glen Allen, VA 23060-6711 Glen Allen, VA 23060-6711 Ms. Lillian M. Cuoco, Esq.
Mr. Thomas L. Breene Senior Counsel Dominon Energy Kewaunee, Inc. Dominion Resources Services, Inc.
Kewaunee Power Station 120 Tredegar Street N490 Highway 42 Riverside 2 Kewaunee, WI 54216 Richmond, VA 23219 Mr. Michael J. Wilson, Director Mr. Stephen E. Scace Nuclear Safety & Licensing Site Vice President Dominion Energy Kewaunee, Inc. Dominion Energy Kewaunee, Inc.
Kewaunee Power Station Kewaunee Power Station N490 Highway 42 N490 Highway 42 Kewaunee, WI 54216 Kewaunee, WI 54216 Mr. Daniel G. Stoddard Mr. David R. Lewis Senior Vice President - Nuclear Operations Pillsbury Winthrop Shaw Pittman, LLP Innsbrook Technical Center - 2SE 2300 N Street, N.W.
5000 Dominion Boulevard Washington, DC 20037-1122 Glen Allen, VA 23060-6711 Mr. Ken Paplham Mr. Alan J. Price E 4095 Sandy Bay Rd.
Vice President - Nuclear Engineering Kewaunee, WI 54216 Innsbrook Technical Center - 2SE 5000 Dominion Boulevard Mr. Jeff Kitsembel, P.E.
Glen Allen, VA 23060-6711 Public Service Commission of Wisconsin P. O. Box 7854 Mr. William D. Corbin Madison, WI 53707-7854 Director - Nuclear Engineering Innsbrook Technical Center - 3NE 5000 Dominion Boulevard Glen Allen, VA 23060-6711
KEWAUNEE POWER STATION LICENSE RENEWAL APPLICATION REQUEST FOR ADDITIONAL INFORMATION RAI B.2.1.29 Selective Leaching of Materials
Background
The applicant stated in LRA Section B2.1.29 that its new Selective Leaching of Materials Program is consistent with GALL AMP XI.M33, Selective Leaching of Materials. The scope of program, preventive actions, parameters monitored or inspected, and detection of aging effects, elements of GALL AMP XI.M33 include a one-time visual inspection and hardness measurement of a selected set of sample components to determine whether loss of material due to selective leaching is not occurring for the period of extended operation. The detection of aging effects program element of GALL AMP XI.M33 furthers clarifies that Brinell Hardness Testing on the inside of a selected set of components is an acceptable method of determining if selective leaching has occurred. The LRA AMP also credits use of qualitative examination, such as resonance when struck by another object, scraping, or chipping, as appropriate, to determine if loss of material due to selective leaching has occurred; which is beyond the hardness measurement recommended by the GALL Report. The GALL AMP does not include a discussion regarding the use of qualitative examinations to determine whether the loss of material due to selective leaching has occurred.
Issue The LRA AMP credits performance of a one-time visual inspection and a hardness test or qualitative examination, such as resonance when struck by another object, scraping, or chipping, as appropriate, to determine whether the aging effect of loss of material due to selective leaching has occurred, while the GALL AMP recommends performance of a one-time visual inspection and a hardness measurement.
Request Please provide justification for why the qualitative examination methodologies credited in the LRA AMP are acceptable alternative to performing a hardness measurement as recommended by the GALL Report.
Please also revise the LRA AMP to reflect that inclusion of a qualitative examination, such as resonance when struck by another object, scraping, or chipping, is an exception to the GALL AMP.
RAI B.2.1.16 Inspection of Overhead Heavy Load and Refueling Handling Systems
Background
The applicant stated in LRA Section B2.1.16 that its existing Inspection of Overhead Heavy Load and Refueling Handling Systems Program is consistent with GALL AMP XI.M23, Inspection of Overhead Heavy Load and Light Load (Related to Refueling) Handling Systems.
The scope of program program element description for GALL AMP XI.M23 states that the program manages the effects of general corrosion on the crane and trolley structural components and the effects of wear on the rails in the rail system. However, the applicants ENCLOSURE
Overhead Heavy Load and Refueling Handling Systems Program includes visual inspection of the structural bolting associated with structural members for general corrosion and tightness.
Issue The applicant included visual examination of structural bolting associated with structural members for tightness within the scope of the Overhead Heavy Load and Refueling Handling Systems Program. The GALL Report recommends use of GALL AMP XI.M18, Bolting Integrity, to manage the effects of aging on structural bolting. GALL AMP XI.M18 recommends volumetric examination for structural bolting larger than one inch with a yield strength greater than 150 ksi, in addition to visual examination.
Request Please justify how a visual inspection will verify tightness of bolting. Additionally, the staff requests that the applicant verify if this bolting is also managed by its Bolting Integrity Program, and if not, verify whether it conducts volumetric examinations on bolting larger than one inch with a yield strength greater than or equal to 150 ksi.
RAI B.2.1.5 Bolting Integrity Program
Background
The applicant stated in LRA Section B2.1.5 that its existing Bolting Integrity Program is consistent, with an enhancement, with GALL AMP XI.M18, Bolting Integrity. In its response to RAI B2.1.5-5 on September 28, 2009, the applicant stated that it would take an exception to the B2.1.5 Bolting Integrity Program to use only visual inspections to detect the effects of aging on high strength bolting with a diameter greater than one inch whereas GALL AMP XI.M18 recommends volumetric and visual examinations. The applicant justified the exception by stating that the bolting in question is used to provide a connection between the top of the reactor coolant pump support columns and the pump support brackets. The applicant stated that these bolts are hand tightened at each end and are not torqued. The applicant also stated that visual examinations will detect corrosion and conditions indicative of a corrosive environment which is a requirement of SCC in high strength bolting.
Issue In its response to RAI B2.1.5-5 the applicant took an exception to the recommendation to perform volumetric testing on high strength bolting, noting that SCC is an aging effect requiring management for the reactor coolant pump connecting bolts because of the possibility of residual stresses from the manufacturer for these high strength bolts.
In LRA Table 3.5.2-15, footnote 4, the steam generator footbolts are noted as not being susceptible to SCC and therefore not included in the Bolting Integrity Program. In its response to RAI B2.1.5-5, the applicant did not include justification for why the steam generator footbolts are not susceptible to SCC. The applicant did not include specific information regarding why the footbolts are not subject to a corrosive environment, and have low residual and tensile stresses.
Request Please provide justification for why the steam generator footbolts are noted in LRA Table 3.5.2-15, footnote 4, as not subject to SCC and why no aging management program is credited to manage the effects of aging on the footbolts.
Additionally, the staff requests that the applicant verify whether it has any high strength structural bolting with a diameter greater than one inch other than those associated with the reactor coolant pump connecting bolts and steam generator footbolts.
RAI B2.1.30 Kewaunee Steam Generator Tube Integrity
Background
By letter dated July 13, 2009, the staff issued several RAIs (B2.1.30-1 through B2.1.30-13) about the steam generator tube integrity aging management program requesting the applicant to solve numerous inconsistencies the staff identified between the applicants program and its implementing documents and industry guidance documents.
The applicant responded to these RAIs in its letter dated August 17, 2009. The staff reviewed the applicants answers.
Issue However, for some of these RAIs (B2.1.30-2, B2.1.30-3, B2.1.30-5, B2.1.30-7, B2.1.30-11, and B2.1.30-12), the staff finds the applicants response inadequate, mainly because the staff could not verify that the modifications to be made to the procedure and/or implementing documents will be consistent with the GALL AMP XI.M19.
Request Confirm that the modifications you will implement through your Corrective Action Program in your different documents in a way that elements one through six of your Steam Generator Tube Integrity Program will be consistent with the corresponding program elements of GALL AMP XI.M19 before entering in the period of extended operation for RAIs B2.1.30-2, B2.1.30-3, B2.1.30-5, B2.1.30-7, B2.1.30-11, and B2.1.30-12.
RAI 3.1.2.2.2.4-02a - Kewaunee - Follow up to RAI 3.1.2.2.2.4-2
Background
By letter dated November 20, 2009, the staff issued RAI 3.1.2.2.2.4-2 requesting the applicant to describe the inspections that will be performed on the transition weld during the renewed license period. The transition weld is the new field weld generated by the cut made in the transition cone at the time of steam generator replacement.
In its response dated December 28, 2009, the applicant stated that a radiography examination (in accordance with the requirements of ASME Code,Section III) was performed on this weld at the time of SG replacement, with no indications identified that exceed the acceptance criteria of ASME Code,Section III. The applicant further stated that the transition weld does not require volumetric examination in accordance with ASME,Section XI inservice inspection requirements, because it is not located at a gross structural discontinuity, as defined in the ASME Code, and is located a sufficient distance from the structural discontinuity at the transition cone-to-upper shell junction such that the resulting elevated stresses at that junction do not affect the transition weld area. The applicant identified that the transition weld does receive a VT-2 visual examination as
part of the system pressure test in accordance with ASME Code,Section XI IWC 2500-1, Examination Category C-H requirements.
SRP-LR Section 3.1.2.2.2.4 and GALL AMR Item 3.1.1-16 identify that the loss of material due to general, pitting, and crevice corrosion can occur in steel PWR steam generator SG upper shell-to and lower shell-to transition cone welds that are exposed to a secondary feedwater or steam environment, and that the existing program relies on control of chemistry to mitigate corrosion and Inservice Inspection (ISI) to detect loss of material. SRP-LR Section 3.1.2.2.2.4 further states that the extent and schedule of the existing steam generator inspections are designed to ensure that flaws cannot attain a depth sufficient to threaten the integrity of the welds.
Issue The staff has observed that AMR Item 3.1.1-16 was included in the GALL Report to ensure that volumetric examinations performed in accordance with the requirements of ASME Code Section XI IWC-2500-1, Examination Category C-A, Inspection Item C1.10 for upper shell-to and lower shell-to transition cones with gross structural discontinuities would be capable of managing loss of material due to general, pitting, and crevice corrosion in the welds. The staff has observed that the new continuous circumferential weld in the Kewaunee SG transition cone design should not be aligned to the intent of GALL AMR Item 3.1.1-16 because the intent of this GALL item was to address problems in the SG transition cone welds containing geometric discontinuities, and the new SG transition cone weld does not meet this design description. However, the new transition area weld is a field-weld as opposed to having been made in a controlled manufacturing facility, and the surface conditions of the transition weld may result in flow conditions more conducive to initiation of general, pitting, and crevice corrosion than those of the upper and lower transition cone welds.
According to SRP-LR Section A.1.2.3.4, a program based solely on detecting structure and component failure should not be considered as an effective aging management program for license renewal, as would be the case using detection of leakage as the aging management for the transition weld. Thus, the staff considers the crediting of the ISI program for the new SG transition cone weld to be an ineffective basis for managing loss of material in this weld, as the ISI criteria would only perform a VT-2 visual leakage examination of the weld as part of the system leakage test performed pursuant to ASME Section XI, Table IWC 2500-1, Examination Category C-H requirements and because this type of examination would allow leakage to occur before appropriate corrective actions would be initiated on the weld. In addition, ASME Section XI IWA-5242 does not require licensees to remove insulation when performing visual examination on non-borated treated water systems. As a result, the staff finds the applicants response to RAI 3.1.2.2.2.4-2 does not currently resolve the request in the RAI.
Request Since the surface conditions of the transition weld may result in flow conditions more conducive to initiation of general, pitting, and crevice corrosion than those of the upper and lower transition cone welds, describe the surface condition and the resultant flow near the transition weld (e.g.,
weld crown, ground flush, etc.) and how these parameters could affect the susceptibility of this weld to these aging mechanisms, relative to that of the upper and lower transition welds. Based on this information, justify if any additional aging management of the transition weld is necessary. If additional aging management is necessary, describe an aging management
program of the SG transition weld (including examination frequency and technique) that will be effective in managing an aging effect such as the loss of material due to general, pitting, and crevice corrosion during the period of extended operation.
Kewaunee - RAI 3.1.2.2.13-01, Cracking due to PWSCC
Background
SRP-LR Section 3.1.2.2.13 identifies that cracking due to primary water stress corrosion cracking (PWSCC) could occur in PWR components made of nickel alloy and steel with nickel alloy cladding, including reactor coolant pressure boundary components and penetrations inside the RCS such as pressurizer heater sheathes and sleeves, nozzles, and other internal components. GALL Report Volume 2 Item IV.D1-06 recommends Chapter XI.M2, Water Chemistry, for PWR primary water for managing the aging effect of cracking in the nickel alloy steam generator divider plate exposed to reactor coolant.
In LRA Table 3.1.1, Item 81, the applicant credits its Primary Water Chemistry Program to manage the aging effect of cracking due to primary water stress corrosion cracking in nickel alloy or nickel-alloy clad steam generator (SG) divider plate exposed to reactor coolant, and indicates in Item 82 of this same table that Kewaunees installed steam generator divider plate is fabricated from nickel alloy.
Issue From recent foreign operating experience in steam generators with a similar design to that of Kewaunee, extensive cracking due to PWSCC has been identified in SG divider plates, even with proper primary water chemistry. Specifically, cracks have been detected in the stub runner, very close to the tubesheet/stub runner weld and with depths of almost a third of the divider plate thickness (OECD/NEA/CSNI/IAGE April 2007 EDF presentation). Therefore, the staff notes that the water chemistry program alone does not appear to be effective in managing the aging effect of cracking due to PWSCC in SG divider plate.
Although these SG divider plate cracks may not have a significant safety impact in of themselves, such cracks could impact adjacent items, such as the tubesheet and the channel head, if they propagate to the boundary with these items. For the tubesheet, PWSCC cracks in the divider plate could propagate to the tubesheet cladding with possible consequences to the integrity of the tube/tubesheet welds. For the channel head, the PWSCC cracks in the divider plate could propagate to the SG triple point and potentially affect the pressure boundary of the SG channel head.
Request Please discuss the materials of construction of your SG divider plate assembly. If these materials are susceptible to cracking (e.g., Alloy 600 or the associated Alloy 600 weld materials), please discuss the potential for cracking in the divider plate to propagate into other components (e.g., .tubesheet cladding).
If propagation into these other components cannot be ruled out, please describe an inspection program (examination technique and frequency) for ensuring that there are no cracks propagating into other items (e.g., tube sheet and channel head) that could challenge the integrity of these other items.