ML16358A446: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 19: | Line 19: | ||
==References:== | ==References:== | ||
: 1. NextEra Energy Seabrook, LLC letter SBK-L-15120, "License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6 'Development of Emergency Action Levels for Non-Passive Reactors"' February 27, 2016(ML16068A128) 2. NRC letter "Seabrook Station, Unit No. 1 -Request for Additional Information Related to License Amendment Request to Adopt Emergency Action Level Schemes Pursuant to NE! 99-01, Revision 6 (CAC MF7439)," September 22, 2016(ML16230A533) 3. NextEra Energy Seabrook, LLC letter SBK-L-16162, "Response to Request for Additional Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors", October 27, 2016(ML16302A414) 4. NRC e-mail "Need for Supplement to EAL license amendment" November 10, 2016 (ML 16319A421) In Reference 1 and supplemented by Reference 3, NextEra Energy Seabrook, LLC (NextEra) submitted a license amendment request (LAR) to revise the current EAL scheme to one based upon the Nuclear Energy Institute (NEI) document NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors". In Reference 4, based on a teleconference held on November 7, 2016 to clarify NextEra's responses in Reference 3, the NRC staff requested that NextEra provide clarifications related to the responses provided for RAl-Seabrook-3 and RAl-Seabrook-5 in Reference 3. Additionally, in order to provide a clear licensing basis for the staff to reference, the NRC has requested a NextEra Energy Seabrook, LLC PO Box 300, Seabrook, NH 03874 l U.S. Nuclear Regulatory Commission SBK-L-16196/ Page 2 clean version of the EALs be provided in this supplement. Enclosure 1 to this letter supplements NextEra's responses to RAl-Seabrook-3 and RAl-Seabrook-5. Enclosure 2 provides a markup of the proposed emergency action level revised with this supplement, which supersedes the corresponding markup in Reference 1. Enclosure 3 includes a clean copy of the Seabrook Station Emergency Action Levels-Initiating Conditions, Threshold Values, and Basis, and Enclosure 4 contains the table of NEI 99-01, Rev. 6, Deviations and Differences. This supplement to LAR 15-02 does not alter the conclusion in Reference 1 that the changes do not involve a significant hazards consideration pursuant to 10 CFR 50.92, and there are no significant environmental impacts associated with the changes. No new or revised commitments are included in this letter. Should you have any questions regarding this letter, please contact Mr. Kenneth Browne, Licensing Manager, at (603) 773-7932. I declare under penalty of perjury that the foregoing is true and correct. Executed on December 15 , 2016. Sincerely, Eric McCartney Site Vice President NextEra Energy Seabrook, LLC Enclosures cc: NRC Region I Administrator NRC Project Manager NRC Senior Resident Inspector Director Homeland Security and Emergency Management New Hampshire Department of Safety Division of Homeland Security and Emergency Management Bureau of Emergency Management 33 Hazen Drive Concord, NH 03305 perry.plummer@dos.nh.gov Mr. John Giarrusso, Jr., Nuclear Preparedness Manager The Commonwealth of Massachusetts Emergency Management Agency 400 Worcester Road Framingham, MA 01702-5399 John. Giarrusso@massmail.state.ma. us NextEra Energy Seabrook, LLC, P.O. Box 300, Lafayette Road, Seabrook, NH 03874 | : 1. NextEra Energy Seabrook, LLC letter SBK-L-15120, "License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6 'Development of Emergency Action Levels for Non-Passive Reactors"' | ||
February 27, 2016(ML16068A128) | |||
: 2. NRC letter "Seabrook | |||
: Station, Unit No. 1 -Request for Additional Information Related to License Amendment Request to Adopt Emergency Action Level Schemes Pursuant to NE! 99-01, Revision 6 (CAC MF7439)," | |||
September 22, 2016(ML16230A533) | |||
: 3. NextEra Energy Seabrook, LLC letter SBK-L-16162, "Response to Request for Additional Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors", | |||
October 27, 2016(ML16302A414) | |||
: 4. NRC e-mail "Need for Supplement to EAL license amendment" November 10, 2016 (ML 16319A421) | |||
In Reference 1 and supplemented by Reference 3, NextEra Energy Seabrook, LLC (NextEra) submitted a license amendment request (LAR) to revise the current EAL scheme to one based upon the Nuclear Energy Institute (NEI) document NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors". | |||
In Reference 4, based on a teleconference held on November 7, 2016 to clarify NextEra's responses in Reference 3, the NRC staff requested that NextEra provide clarifications related to the responses provided for RAl-Seabrook-3 and RAl-Seabrook-5 in Reference | |||
: 3. Additionally, in order to provide a clear licensing basis for the staff to reference, the NRC has requested a NextEra Energy Seabrook, LLC PO Box 300, Seabrook, NH 03874 l U.S. Nuclear Regulatory Commission SBK-L-16196/ | |||
Page 2 clean version of the EALs be provided in this supplement. | |||
Enclosure 1 to this letter supplements NextEra's responses to RAl-Seabrook-3 and RAl-Seabrook-5. | |||
Enclosure 2 provides a markup of the proposed emergency action level revised with this supplement, which supersedes the corresponding markup in Reference | |||
: 1. Enclosure 3 includes a clean copy of the Seabrook Station Emergency Action Levels-Initiating Conditions, Threshold Values, and Basis, and Enclosure 4 contains the table of NEI 99-01, Rev. 6, Deviations and Differences. | |||
This supplement to LAR 15-02 does not alter the conclusion in Reference 1 that the changes do not involve a significant hazards consideration pursuant to 10 CFR 50.92, and there are no significant environmental impacts associated with the changes. | |||
No new or revised commitments are included in this letter. Should you have any questions regarding this letter, please contact Mr. Kenneth Browne, Licensing | |||
: Manager, at (603) 773-7932. | |||
I declare under penalty of perjury that the foregoing is true and correct. | |||
Executed on December 15 , 2016. Sincerely, Eric McCartney Site Vice President NextEra Energy Seabrook, LLC Enclosures cc: NRC Region I Administrator NRC Project Manager NRC Senior Resident Inspector Director Homeland Security and Emergency Management New Hampshire Department of Safety Division of Homeland Security and Emergency Management Bureau of Emergency Management 33 Hazen Drive Concord, NH 03305 perry.plummer@dos.nh.gov Mr. John Giarrusso, Jr., Nuclear Preparedness Manager The Commonwealth of Massachusetts Emergency Management Agency 400 Worcester Road Framingham, MA 01702-5399 John. Giarrusso@massmail.state.ma. | |||
us NextEra Energy Seabrook, LLC, P.O. Box 300, Lafayette Road, Seabrook, NH 03874 Enclosure 1 to SBK-L-16196 Response to Request for Supplemental Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors" Enclosure 1 to SBK-L-16196 Page 1 of2 Background NextEra Energy Seabrook Station letter dated October 27, 2016 (SBK-L-16162) provided responses to the NRC staff's request for additional information (RAI) related to the license amendment request regarding revising the current EAL scheme to one based upon the Nuclear Energy Institute (NEI) document NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors". | |||
On November 7, 2016 NRC staff held a phone call with NextEra staff to discuss the responses to RAls 3 and 5. NRC has requested that the clarifying information be provided to NRC in a supplemental letter. The information below provides the requested supplemental information as discussed during the November 7, 2016 phone call. RAl-Seabrook-3 NRC Follow-up Question During the call the NRC staff clarified that the question was directed towards the equipment's alarm setpoint and its tie to exceeding 2 times a release control limit. The NRC staff requests that NextEra supplement its response, as well as revise the wording in the EAL back to the current wording, as discussed during the call. NextEra Response: | |||
Per discussion during the November 7, 2016, phone call, EAL RU1(1) is revised back to the wording that is currently used for EAL AU1 (1) in the existing Seabrook Station NEI 99-01 Rev. 4 EALs. EAL RU1 (2) [NEI 99-01 Rev. 6 EAL AU1 (2)] is deleted because it is redundant to EAL RU1 (1). This is noted in the table of differences and deviations. | |||
EAL RU1 (3) [NEI 99-01 Rev. 6 EAL AU1 (3)] is re-designated EAL RU1(2) and is retained as written because it differs from the existing Seabrook Station NEI 99-01 Rev. 4 EAL AU1(2) in format only. RAl-Seabrook-5 NRC Follow-up Question: | |||
During the call, NextEra was able to clarify to the NRC staff that both SEPS are required by mentioning specific loading requirements in relation to the capacities of the equipment. | |||
Please include these values as discussed during the call. NextEra Response: | |||
Supplemental emergency power sysem (SEPS) Loading Calculation 9763-3-ED-00-02-F shows that the required load to maintain core cooling is greater than the capacity of one SEPS generator engine (2640 KYV). Abnormal operating procedure OS1246.01, Loss of Offsite Power Plant Shutdown, contains instructions to restore power using SEPS. When SEPS is aligned to an emergency bus, 081246.01 directs checking that the following equipment is loading: | |||
* Service water pump | * Service water pump | ||
* Primary component cooling water pump | * Primary component cooling water pump | ||
* Residual heat removal pump | * Residual heat removal pump | ||
* Charging pump | * Charging pump Enclosure 1 to SBK-L-16196 Page 2 of 2 Calculation 9763-3-ED-00-02-F shows that the base load that is sequenced on once the emergency bus is energized and the sequencer finishes is approximately 1612 't<NV. Calculation 9763 3 ED 00 02 F . d ff th f II . t d I d f th . d . t -----I en 11es e o owing ra e oa s or e require equ1pmen: | ||
LOAD Rated KW Charoinq pump 554 Residual heat removal pump 343 Primary component cooling water pump 549 Service water pump 506 Total equipment load 1952 Total equipment load plus base load 3564 The total load of 3564 'r<JN exceeds the capacity of one SEPS engine. The technical basis for EA Ls MG8, MG 1, MS 1, MA 1 and CA2 is revised to add a sentence following the statement that says, "For power restoration from the SEPS both SEPS diesel generator sets must be functional." | |||
The added sentence says, "Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling." | |||
NRC Additional Request: | |||
In addition, in order to provide a clear licensing basis for the staff to reference both now and, if approved, in the future, please provide a clean version of the EALs in this supplement. | |||
NextEra Response: | |||
Clean version of all the EALs can be found in Enclosure 3-Clean Copy of Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis. A clean version of NEI 99-01, Rev. 6, Deviations and Differences, can be found in Enclosure | |||
: 4. | |||
Enclosure 2 to SBK-L-16196 Markup of Affected Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis RU1 Notification of Unusual Event Initiating Condition: | |||
Release of gaseous or liquid radioactivity greater than 2 times the (site specific effluent release controlling document) | |||
ODCM limits for 60 minutes or longer. Operating Mode Applicability: | |||
All Example Emergency Action Levels: (1 or Notes: | |||
* The Emergency Director STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. | * The Emergency Director STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. | ||
* If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes. | * If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes. | ||
* If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification u oses. (1) a. VALID R:reading on ANY of the following effluent radiation monitors greater than 2 times the (site specific effluent release controlling document) limits value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WIT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown) RM-6473-1 (WTLIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes. (site specific monitor list and threshold values corresponding to 2 times the controlling document limits) (2) Reading on effluent radiation monitor greater than 2 times the alarm setpoint established by a current radioactivity discharge permit for 60 minutes or longer. OR (:'.;-2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the (site specific effluent release controlling document) ODCM limits for 60 minutes or longer. | * If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification u oses. (1) a. VALID R:reading on ANY of the following effluent radiation monitors greater than 2 times the (site specific effluent release controlling document) limits value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WIT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown) | ||
Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time (e.g., an uncontrolled release). It includes any gaseous or liquid | RM-6473-1 (WTLIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes. | ||
EAL #2 This EAL addresses radioactivity releases that cause effluent radiation monitor readings to e>weed 2 times the limit established by a radioactivity discharge permit. This EAL will t)13ically be associated with planned batch releases from non continuous release pathw*ays (e.g., radwaste, waste gas). EAL #?r2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental surveys, particularly on unmonitored pathways (e.g., spills of radioactive liquids into storm drains, heat e1whanger leakage in river water systems, etc.). Escalation of the emergency classification level would be via IC RA I. to SBK-L-16196 Clean Copy of Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis SEABROOK STATION EMERGENCY ACTION LEVELS INITIATING CONDITIONS, THRESHOLD VALUES AND BASIS TABLE OF CONTENTS 1 REGULATORY BACKGROUND ................................................................................... 1 1.1 OPERATING REACTORS .................................................................................................. 1 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSl) ..................................... 1 1.3 NRC ORDEREA-12-051 ................................................................................................ 2 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION ............................................... 4 1.5 IC AND EAL MODE APPLICABILITY .............................................................................. 4 1.6 BASIS DOCUMENT ..................................................................................................... 5 1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA ............................................................................................. 6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS ....................................... 7 2.1 GENERAL CONSIDERATIONS .......................................................................................... 7 2.2 CLASSIFICATION METHODOLOGY ................................................................................. 8 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS .......................................... 8 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION ................................ 8 2.5 CLASSIFICATION OF IMMINENT CONDITIONS ............................................................... 9 2.6 EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING ................... 9 2.7 CLASSIFICATION OF SHORT-LIVED EVENTS ................................................................. 9 2.8 CLASSIFICATION OF TRANSIENT CONDITIONS ............................................................ 10 2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION .............. 10 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS ........................ 12 4 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS .................... 28 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION {ISFSI) ICS/EALS ............. 49 6 FISSION PRODUCT BARRIER ICS/EALS ........... 11******u*u*un******n*********nH11HHH*H****** 51 7 HAZARDS AND OTHER CONDITIONS AFFECTING PLANT SAFETY ICS/EALS ......... 64 8 SYSTEM MALFUNCTION ICS/EALS *****************************11*******************************11*11**11******86 APPENDIX A -ACRONYMS AND ABBREVIATIONS .......................................................... 1 APPENDIX B -DEFINITIONS ***************111****************************11*********************************************** 3 ii EMERGENCY ACTION LEVELS 1 REGULATORY BACKGROUND 1.1 OPERATING REACTORS Title 10, Code of Pederal Regulations (CPR), Energy, contains the U.S. Nuclear Regulatory Commission (NRC) regulations that apply to nuclear power facilities. Several of these regulations govern various aspects of an emergency classification scheme. A review of the relevant sections listed below will aid the reader in understanding the key terminology provided in Section 3.0 of this document. | (site specific monitor list and threshold values corresponding to 2 times the controlling document limits) (2) Reading on effluent radiation monitor greater than 2 times the alarm setpoint established by a current radioactivity discharge permit for 60 minutes or longer. OR (:'.;-2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the (site specific effluent release controlling document) | ||
ODCM limits for 60 minutes or longer. | |||
Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time (e.g., an uncontrolled release). | |||
It includes any gaseous or liquid radiologica l release, monitoredor un-monitored | |||
, including those for which a radioactivity discharge permit is normally prepared. | |||
Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment. | |||
: Further, there are administrative controls established to prevent unintentional | |||
: releases, and to control and monitor intentional releases. | |||
The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls. | |||
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiologica l effluent EALs more fully addresses the spectrum of possible accident events and conditions | |||
. Classification based on effluent monitor readings assumes that a release path to the environment is established. | |||
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | |||
Releases should not be prorated or averaged. | |||
For example, a release exceeding 4 times release limits for 30 minutes does not meet the EAL. EAL #1 -This EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways. EAL #1 addresses radioactivity releases, that for whatever reason, cause effluent radiation monitor readings to exceed two times the ODCM limit and releases are not terminated within 60 minutes. | |||
This alarm setpoint may be associated with a planned batch release, or a continuous release path. In either case, the setpoint is established by the ODCM. Indexing the EAL threshold to the ODCM setpoints in this manner insures that the EAL threshold will never be less than the setpoint established by a specific discharge pennit. The discharge flowpaths associated with RM-6509-1 | |||
, 6521-1, 6519-1, and 6473-1 have automatic and manual flow isolation capability | |||
. The EAL wording addresses a situation where a residual source term exists in a discharge flowpath AFTER the flowpath has been isolated, and the associated radiation monitor remains at values above 2 times the value of the current alarm setpoint. | |||
EAL l .b ensures that the Initiating Condition (IC) intent of "to the environment" is met. The 60-minute assessment clock starts at the same time for both EAL l .a and 1.b (i.e., clocks run concurrently) | |||
. There must be a release to the environment (i.e., the flowpath can not be isolated) during the same period that a monitor value is greater than 2 times the value of the current high-alarm setpoint. | |||
EAL #2 This EAL addresses radioactivity releases that cause effluent radiation monitor readings to e>weed 2 times the limit established by a radioactivity discharge permit. This EAL will t)13ically be associated with planned batch releases from non continuous release pathw*ays (e.g., radwaste, waste gas). EAL #?r2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental | |||
: surveys, particularly on unmonitored pathways (e.g., spills of radioactive liquids into storm drains, heat e1whanger leakage in river water systems, etc.). Escalation of the emergency classification level would be via IC RA I. | |||
Enclosure 3 to SBK-L-16196 Clean Copy of Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis SEABROOK STATION EMERGENCY ACTION LEVELS INITIATING CONDITIONS, THRESHOLD VALUES AND BASIS TABLE OF CONTENTS 1 REGULATORY BACKGROUND | |||
................................................................................... | |||
1 1.1 OPERATING REACTORS | |||
.................................................................................................. | |||
1 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSl) ..................................... | |||
1 1.3 NRC ORDEREA-12-051 | |||
................................................................................................ | |||
2 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION | |||
............................................... | |||
4 1.5 IC AND EAL MODE APPLICABILITY | |||
.............................................................................. | |||
4 1.6 BASIS DOCUMENT | |||
..................................................................................................... | |||
5 1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA | |||
............................................................................................. | |||
6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS | |||
....................................... | |||
7 2.1 GENERAL CONSIDERATIONS | |||
.......................................................................................... | |||
7 2.2 CLASSIFICATION METHODOLOGY | |||
................................................................................. | |||
8 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS | |||
.......................................... | |||
8 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION | |||
................................ | |||
8 2.5 CLASSIFICATION OF IMMINENT CONDITIONS | |||
............................................................... | |||
9 2.6 EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING | |||
................... | |||
9 2.7 CLASSIFICATION OF SHORT-LIVED EVENTS ................................................................. | |||
9 2.8 CLASSIFICATION OF TRANSIENT CONDITIONS | |||
............................................................ | |||
10 2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION | |||
.............. | |||
10 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS | |||
........................ | |||
12 4 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS | |||
.................... | |||
28 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION | |||
{ISFSI) ICS/EALS | |||
............. | |||
49 6 FISSION PRODUCT BARRIER ICS/EALS | |||
........... | |||
11******u*u*un******n*********nH11HHH*H****** | |||
51 7 HAZARDS AND OTHER CONDITIONS AFFECTING PLANT SAFETY ICS/EALS | |||
......... | |||
64 8 SYSTEM MALFUNCTION ICS/EALS | |||
*****************************11*******************************11*11**11******86 APPENDIX A -ACRONYMS AND ABBREVIATIONS | |||
.......................................................... | |||
1 APPENDIX B -DEFINITIONS | |||
***************111****************************11*********************************************** | |||
3 ii EMERGENCY ACTION LEVELS 1 REGULATORY BACKGROUND 1.1 OPERATING REACTORS Title 10, Code of Pederal Regulations (CPR), Energy, contains the U.S. Nuclear Regulatory Commission (NRC) regulations that apply to nuclear power facilities. | |||
Several of these regulations govern various aspects of an emergency classification scheme. A review of the relevant sections listed below will aid the reader in understanding the key terminology provided in Section 3.0 of this document. | |||
* 10 CPR§ 50.47(a)(l)(i) | * 10 CPR§ 50.47(a)(l)(i) | ||
* 10 CPR§ 50.47(b)(4) | * 10 CPR§ 50.47(b)(4) | ||
Line 34: | Line 145: | ||
* 10 CPR§ 50.72(a) | * 10 CPR§ 50.72(a) | ||
* 10 CPR§ 50, Appendix E, IV.B, Assessment Actions | * 10 CPR§ 50, Appendix E, IV.B, Assessment Actions | ||
* 10 CPR§ 50, Appendix E, IV.C, Activation of Emergency Organization The above regulations are supplemented by various regulatory guidance documents. Three documents of particular relevance to NEI 99-01 are: | * 10 CPR§ 50, Appendix E, IV.C, Activation of Emergency Organization The above regulations are supplemented by various regulatory guidance documents. | ||
Three documents of particular relevance to NEI 99-01 are: | |||
* NUREG-0654/FEMA-REP-1, Criteria/or Preparation and Evaluation of Radiological Emergency Response Plans and Preparedness in Support of Nuclear Power Plants, October 1980. [Refer to Appendix 1, Emergency Action Level Guidelines for Nuclear Power Plants] | * NUREG-0654/FEMA-REP-1, Criteria/or Preparation and Evaluation of Radiological Emergency Response Plans and Preparedness in Support of Nuclear Power Plants, October 1980. [Refer to Appendix 1, Emergency Action Level Guidelines for Nuclear Power Plants] | ||
* NUREG-1022, Event Reporting Guidelines 10 CFR § 5 0. 72 and§ 5 0. 7 3 | * NUREG-1022, Event Reporting Guidelines 10 CFR § 5 0. 72 and§ 5 0. 7 3 | ||
* Regulatory Guide 1.101, Emergency Response Planning and Preparedness for Nuclear Power Reactors 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) Selected guidance in NEI 99-01 is applicable to licensees electing to use their 10 CPR 50 emergency plan to fulfill the requirements of 10 CPR 72.32 for a stand-alone ISPSI. The emergency classification levels applicable to an ISPSI are consistent with the requirements of 10 CFR § 50 and the guidance in NUREG 0654/FEMA-REP-l. The initiating conditions germane to a 10 CFR § 72.32 emergency plan (as described in NUREG-1567) are subsumed within the classification scheme for a 10 CFR § 50.47 emergency plan. The generic ICs and EALs for an ISFSI are presented in Section 5, ISFSI ICs/EALs. IC EUl covers the spectrum of credible natural and man-made events included within the scope of an ISFSI design. The analysis of potential onsite and off site consequences of accidental releases associated with the operation of an ISFSI is contained in NUREG-1140, A Regulatory Analysis on Emergency Preparedness for Fuel Cycle and Other Radioactive Material Licensees. NUREG-1140 concluded that the postulated worst-case accident involving an ISFSI has insignificant consequences to public health and safety. This evaluation shows that the 1 maximum offsite dose to a member of the public due to an accidental release of radioactive materials would not exceed 1 rem Effective Dose Equivalent. 1.3 NRC ORDEREA-12-051 The Fukushima Daiichi accident of March 11, 2012, was the result of a tsunami that exceeded the plant's design basis and flooded the site's emergency electrical power supplies and distribution systems. This caused an extended loss of power that severely compromised the key safety functions of core cooling and containment integrity, and ultimately led to core damage in three reactors. While the loss of power also impaired the spent fuel pool cooling function, sufficient water inventory was maintained in the pools to preclude fuel damage from the loss of cooling. Following a review of the Fukushima Daiichi accident, the NRC concluded that several measures were necessary to ensure adequate protection of public health and safety under the provisions of the backfit rule, 10 CFR 50.109(a)(4)(ii). Among them was to provide each spent fuel pool with reliable level instrumentation to significantly enhance the ability of key decision-makers to allocate resources effectively following a beyond design basis event. To this end, the NRC issued Order EA-12-051, Issuance of Order to Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation, on March 12, 2012, to all US nuclear plants with an operating license, construction permit, or combined construction and operating license. NRC Order EA-12-051 states, in part, "All licensees ... shall have a reliable indication of the water level in associated spent fuel storage pools capable of supporting identification of the following pool water level conditions by trained personnel: (1) level that is adequate to support operation of the normal fuel pool cooling system, (2) level that is adequate to provide substantial radiation shielding for a person standing on the spent fuel pool operating deck, and (3) level where fuel remains covered and actions to implement make-up water addition should no longer be deferred." To this end, all licensees must provide: | * Regulatory Guide 1.101, Emergency Response Planning and Preparedness for Nuclear Power Reactors 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) Selected guidance in NEI 99-01 is applicable to licensees electing to use their 10 CPR 50 emergency plan to fulfill the requirements of 10 CPR 72.32 for a stand-alone ISPSI. The emergency classification levels applicable to an ISPSI are consistent with the requirements of 10 CFR § 50 and the guidance in NUREG 0654/FEMA-REP-l. | ||
The initiating conditions germane to a 10 CFR § 72.32 emergency plan (as described in NUREG-1567) are subsumed within the classification scheme for a 10 CFR § 50.47 emergency plan. The generic ICs and EALs for an ISFSI are presented in Section 5, ISFSI ICs/EALs. | |||
IC EUl covers the spectrum of credible natural and man-made events included within the scope of an ISFSI design. The analysis of potential onsite and off site consequences of accidental releases associated with the operation of an ISFSI is contained in NUREG-1140, A Regulatory Analysis on Emergency Preparedness for Fuel Cycle and Other Radioactive Material Licensees. | |||
NUREG-1140 concluded that the postulated worst-case accident involving an ISFSI has insignificant consequences to public health and safety. This evaluation shows that the 1 maximum offsite dose to a member of the public due to an accidental release of radioactive materials would not exceed 1 rem Effective Dose Equivalent. | |||
1.3 NRC ORDEREA-12-051 The Fukushima Daiichi accident of March 11, 2012, was the result of a tsunami that exceeded the plant's design basis and flooded the site's emergency electrical power supplies and distribution systems. | |||
This caused an extended loss of power that severely compromised the key safety functions of core cooling and containment integrity, and ultimately led to core damage in three reactors. | |||
While the loss of power also impaired the spent fuel pool cooling function, sufficient water inventory was maintained in the pools to preclude fuel damage from the loss of cooling. | |||
Following a review of the Fukushima Daiichi accident, the NRC concluded that several measures were necessary to ensure adequate protection of public health and safety under the provisions of the backfit rule, 10 CFR 50.109(a)(4)(ii). | |||
Among them was to provide each spent fuel pool with reliable level instrumentation to significantly enhance the ability of key decision-makers to allocate resources effectively following a beyond design basis event. To this end, the NRC issued Order EA-12-051, Issuance of Order to Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation, on March 12, 2012, to all US nuclear plants with an operating | |||
: license, construction permit, or combined construction and operating license. | |||
NRC Order EA-12-051 states, in part, "All licensees | |||
... shall have a reliable indication of the water level in associated spent fuel storage pools capable of supporting identification of the following pool water level conditions by trained personnel: | |||
(1) level that is adequate to support operation of the normal fuel pool cooling system, (2) level that is adequate to provide substantial radiation shielding for a person standing on the spent fuel pool operating deck, and (3) level where fuel remains covered and actions to implement make-up water addition should no longer be deferred." | |||
To this end, all licensees must provide: | |||
* A primary and back-up level instrument that will monitor water level from the normal level to the top of the used fuel rack in the pool; | * A primary and back-up level instrument that will monitor water level from the normal level to the top of the used fuel rack in the pool; | ||
* A display in an area accessible following a severe event; and | * A display in an area accessible following a severe event; and | ||
* Independent electrical power to each instrument channel and provide an alternate remote power connection capability. NEI 12-02, Industry Guidance for Compliance with NRC Order EA-12-051, "To Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation", provides guidance for complying with NRC Order EA-12-051. NEI 99-01, Revision 6, includes three EALs that reflect the availability of the enhanced spent fuel pool level instrumentation associated with NRC Order EA-12-051. These EALs are included within existing IC RA2, and new ICs RS2 and RG2. Associated EAL notes, bases and developer notes are also provided. It is recommended that these EALs be implemented when the enhanced spent fuel pool level instrumentation is available for use. 2 The regulatory process that licensees follow to make changes to their emergency plan, including non-scheme changes to EALs, is 10 CFR 50.54(q). In accordance with this regulation, licensees are responsible for evaluating a proposed change and determining whether or not it results in a reduction in the effectiveness of the plan. As a result of the licensee's determination, the licensee will either make the change or submit it to the NRC for prior review and approval in accordance with 10 CFR 50.90. 3 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION The scheme's information is organized by Recognition Category in the following order. | * Independent electrical power to each instrument channel and provide an alternate remote power connection capability. | ||
NEI 12-02, Industry Guidance for Compliance with NRC Order EA-12-051, "To Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation", | |||
provides guidance for complying with NRC Order EA-12-051. | |||
NEI 99-01, Revision 6, includes three EALs that reflect the availability of the enhanced spent fuel pool level instrumentation associated with NRC Order EA-12-051. | |||
These EALs are included within existing IC RA2, and new ICs RS2 and RG2. Associated EAL notes, bases and developer notes are also provided. | |||
It is recommended that these EALs be implemented when the enhanced spent fuel pool level instrumentation is available for use. 2 The regulatory process that licensees follow to make changes to their emergency plan, including non-scheme changes to EALs, is 10 CFR 50.54(q). | |||
In accordance with this regulation, licensees are responsible for evaluating a proposed change and determining whether or not it results in a reduction in the effectiveness of the plan. As a result of the licensee's determination, the licensee will either make the change or submit it to the NRC for prior review and approval in accordance with 10 CFR 50.90. 3 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION The scheme's information is organized by Recognition Category in the following order. | |||
* R -Abnormal Radiation Levels I Radiological Effluent | * R -Abnormal Radiation Levels I Radiological Effluent | ||
* C -Cold Shutdown I Refueling System Malfunction | * C -Cold Shutdown I Refueling System Malfunction | ||
Line 46: | Line 177: | ||
* F -Fission Product Barrier | * F -Fission Product Barrier | ||
* H -Hazards and Other Conditions Affecting Plant Safety | * H -Hazards and Other Conditions Affecting Plant Safety | ||
* M -System Malfunction 1.5 IC AND EAL MODE APPLICABILITY The following table shows which Recognition Categories are applicable in each plant mode. The ICs and EALs for a given Recognition Category are applicable in the indicated modes. MODE APPLICABILITY MATRIX Category Mode R c E F H M Power Operations x x x x x Startup x x x x x Hot Standby x x x x x Hot Shutdown x x x x x Cold Shutdown x x x x Refueling x x x x Defueled x x x x 4 MODE 1. Power Operation 2. Startup 3. Hot Standby 4. Hot Shutdown 5. Cold Shutdown 6. Refueling** NA Defueled Operating Modes Technical Specifications TABLE 1.2 Reactivity % Rated Thermal Average Coolant Condition, Keff Power* Temperature :::: 0.99 >5% 350°F 0.99 .::; 5% 350°F < 0.99 0 350°F < 0.99 0 350 °F > Tavg >200 °F <0.99 0 < 200 °F NA 0 < 140 °F All fuel removed from the reactor vessel (full core offload during refueling or extended outage) *Excluding decay heat. **Fuel in the reactor vessel with the vessel head closure bolts less than fully tensioned or with the head removed. 1.6 BASIS DOCUMENT The basis document is an integral part of an emergency classification scheme. The material in this document supports proper emergency classification decision-making by providing informing background and development information in a readily accessible format. It can be referred to in training situations and when making an actual emergency classification, if necessary. The document is also useful for establishing configuration management controls for BP-related equipment and explaining an emergency classification to offsite authorities. The content of the basis document includes: | * M -System Malfunction 1.5 IC AND EAL MODE APPLICABILITY The following table shows which Recognition Categories are applicable in each plant mode. The ICs and EALs for a given Recognition Category are applicable in the indicated modes. MODE APPLICABILITY MATRIX Category Mode R c E F H M Power Operations x x x x x Startup x x x x x Hot Standby x x x x x Hot Shutdown x x x x x Cold Shutdown x x x x Refueling x x x x Defueled x x x x 4 MODE 1. Power Operation | ||
: 2. Startup 3. Hot Standby 4. Hot Shutdown | |||
: 5. Cold Shutdown | |||
: 6. Refueling** | |||
NA Defueled Operating Modes Technical Specifications TABLE 1.2 Reactivity | |||
% Rated Thermal Average Coolant Condition, Keff Power* Temperature | |||
:::: 0.99 >5% 350°F 0.99 .::; 5% 350°F < 0.99 0 350°F < 0.99 0 350 °F > Tavg >200 °F <0.99 0 < 200 °F NA 0 < 140 °F All fuel removed from the reactor vessel (full core offload during refueling or extended outage) *Excluding decay heat. **Fuel in the reactor vessel with the vessel head closure bolts less than fully tensioned or with the head removed. | |||
1.6 BASIS DOCUMENT The basis document is an integral part of an emergency classification scheme. The material in this document supports proper emergency classification decision-making by providing informing background and development information in a readily accessible format. It can be referred to in training situations and when making an actual emergency classification, if necessary. | |||
The document is also useful for establishing configuration management controls for BP-related equipment and explaining an emergency classification to offsite authorities. | |||
The content of the basis document includes: | |||
* A site-specific Mode Applicability Matrix and description of operating modes (see Section 1.5). | * A site-specific Mode Applicability Matrix and description of operating modes (see Section 1.5). | ||
* A discussion of the emergency classification and declaration process (see Section 2). | * A discussion of the emergency classification and declaration process (see Section 2). | ||
* Each Initiating Condition along with the associated EALs or fission product barrier thresholds, Operating Mode Applicability, Notes and Basis information (see Sections 3-8). | * Each Initiating Condition along with the associated EALs or fission product barrier thresholds, Operating Mode Applicability, Notes and Basis information (see Sections 3-8). | ||
* A listing of acronyms and defined terms (see Appendices A and B, respectively). A basis section should not contain information that could modify the meaning or intent of the associated IC or EAL. Such information should be incorporated within the IC or EAL statements, or as an EAL Note. Information in the Basis should only clarify and inform decision-making for an emergency classification. Basis information should be readily available to be referenced, if necessary, by the Short Term Emergency Director/Site Emergency Director (STED/SED). For example, a copy 5 of the basis document could be maintained in the appropriate emergency response facilities. Because the information in a basis document can affect emergency classification decision-making (e.g., the STED/SED refers to it during an event), the NRC staff expects that changes to the basis document will be evaluated in accordance with the provisions of 10 CFR 50.54(q). 1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA The criteria/values used in several EALs and fission product barrier thresholds may be drawn from AOPs and EOPs. This approach is intended to maintain good alignment between operational diagnoses and emergency classification assessments. Appropriate administrative controls are in place to ensure that a subsequent change to an AOP or BOP is screened to determine if an evaluation pursuant to 10 CFR 50.54(q) is required. 6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS 2.1 GENERAL CONSIDERATIONS When making an emergency classification, the STED/SED must consider all information having a bearing on the proper assessment of an Initiating Condition (IC). This includes the Emergency Action Level (EAL) plus the associated Operating Mode Applicability, Notes and the informing Basis information. In the Recognition Category F matrices, EALs are referred to as Fission Product Barrier Thresholds; the thresholds serve the same function as an EAL. NRC regulations require the licensee to establish and maintain the capability to assess, classify, and declare an emergency condition within 15 minutes after the availability of indications to plant operators that an emergency action level has been exceeded and to promptly declare the emergency condition as soon as possible following identification of the appropriate emergency classification level. The NRC staff has provided guidance on implementing this requirement in NSIR/DPR-ISG-01, Interim Staff Guidance, Emergency Planning for Nuclear Power Plants. All emergency classification assessments should be based upon valid indications, reports or conditions. A valid indication, report, or condition, is one that has been verified through appropriate means such that there is no doubt regarding the indicator's operability, the condition's existence, or the report's accuracy. For example, validation could be accomplished through an instrument channel check, response on related or redundant indicators, or direct observation by plant personnel. The validation of indications should be completed in a manner that supports timely emergency declaration. For ICs and EALs that have a stipulated time duration, the STED/SED should not wait until the applicable time has elapsed, but should declare the event as soon as it is determined that the condition has exceeded, or will likely exceed, the applicable time. If an ongoing radiological release is detected and the release start time is unknown, it should be assumed that the release duration specified in the IC/EAL has been exceeded, absent data to the contrary. A planned work activity that results in an expected event or condition which meets or exceeds an EAL does not warrant an emergency declaration provided that 1) the activity proceeds as planned and 2) the plant remains within the limits imposed by the operating license. Such activities include planned work to test, manipulate, repair, maintain or modify a system or component. In these cases, the controls associated with the planning, preparation and execution of the work will ensure that compliance is maintained with all aspects of the operating license provided that the activity proceeds and concludes as expected. Events or conditions of this type may be subject to the reporting requirements of 10 § CFR 50.72. The assessment of some EALs is based on the results of analyses that are necessary to ascertain whether a specific EAL threshold has been exceeded; the EAL and/or the associated basis discussion will identify the necessary analysis. In these cases, the 15-minute declaration period starts with the availability of the analysis results that show the threshold to be exceeded (i.e., this is the time that the EAL information is first available). 7 The NRC expects licensees to establish the capability to initiate and complete related analyses within a reasonable period of time. While the EALs have been developed to address a full spectrum of possible events and conditions which may warrant emergency classification, a provision for classification based on operator/management experience and judgment is still necessary. The NEI 99-01 scheme provides the STED/SED with the ability to classify events and conditions based upon judgment using EALs that are consistent with the Emergency Classification Level (ECL) definitions (refer to Category H). The STED/SED will need to determine if the effects or consequences of the event or condition reasonably meet or exceed a particular ECL definition. A similar provision is incorporated into the Fission Product Barrier Tables; judgment may be used to determine the status of a fission product barrier. 2.2 CLASSIFICATION METHODOLOGY To make an emergency classification, the user will compare an event or condition (i.e., the relevant plant indications and reports) to an EAL(s) and determine ifthe EAL has been met or exceeded. The evaluation of an EAL(s) must be consistent with the related Operating Mode Applicability and Notes. If an EAL has been met or exceeded, then the IC is considered met and the associated ECL is declared in accordance with plant procedures. When assessing an EAL that specifies a time duration for the off-normal condition, the "clock" for the EAL time duration runs concurrently with the emergency classification process "clock." For a full discussion of this timing requirement, refer to ISG-01. 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS When multiple emergency events or conditions are present, the user will identify all met or exceeded EALs. The highest applicable ECL identified during this review is declared. For example: | * A listing of acronyms and defined terms (see Appendices A and B, respectively). | ||
* If an.Alert EAL and a Site Area Emergency EAL are met, a Site Area Emergency should be declared. There is no "additive" effect from multiple EALs meeting the same ECL. For example: | A basis section should not contain information that could modify the meaning or intent of the associated IC or EAL. Such information should be incorporated within the IC or EAL statements, or as an EAL Note. Information in the Basis should only clarify and inform decision-making for an emergency classification. | ||
* If two Alert EALs are met, an Alert should be declared. Related guidance concerning classification of rapidly escalating events or conditions is provided in Regulatory Issue Summary (RIS) 2007-02, Clarification ofNRC Guidance for Emergency Notifications During Quickly Changing Events. 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION The mode in effect at the time that an event or condition occurred, and prior to any plant or operator response, is the mode that determines whether or not an IC is applicable. If an event or condition occurs, and results in a mode change before the emergency is declared, the emergency classification level is still based on the mode that existed at the time that the event or condition was initiated (and not when it was declared). 8 2.5 2.6 2.7 Once a different mode is reached, any n ew event or condition, not related to the original classification should be evaluated against the ICs ode at the time of the new event or condition. event or condition, requiring emergency and EALs applicable to the operating m For events that occur in Cold Shutdown or Refueling, escalation is via EALs that are fueling modes, even if Hot Shutdown (or a higher plant response. In particular, the fission product nts that initiate in the Hot Shutdown mode or applicable in the Cold Shutdown or Re mode) is entered during the subsequent barrier EALs are applicable only to eve higher. CLASSIFICATION OF IMMINENT CONDI TIO NS Although EALs provide specific thresh olds, the STED/SED must remain alert to events or exceeding an EAL within a relatively short L is IMMINENT). If, in the judgment of the or conditions that could lead to meeting period of time (i.e., a change in the EC STED/SED, meeting an EAL is I MMINENT, the emergency classification should be made as if the EAL has been met. Whil e applicable to all emergency classification ortant at the higher emergency classification levels, this approach is particularly imp levels since it provides additional time for implementation of protective measures. EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING An ECL may be downgraded when the event or condition that meets the highest IC and ecific downgrading requirements are met. If priate, the new ECL would then be based on a EAL no longer exists, and other site-sp downgrading the ECL is deemed appro lower applicable IC(s) and EAL(s). Th e ECL may also simply be terminated. The following approach to downgradin g or terminating an ECL is recommended. ECL Unusual Event Alert Site Area Emergency with no long-term plant damage Site Area Emergency with long-term plant damage General Emergency Ter Action When Condition No Longer Exists minate the emergency in accordance with plant edures. proc Dow ngrade or terminate the emergency in rdance with plant procedures. acco Dow ngrade or terminate the emergency in rdance with plant procedures. acco Ter minate the emergency and enter recovery in rdance with plant procedures. acco Ten acco ninate the emergency and enter recovery in rdance with plant procedures. CLASSIFICATION OF SHORT-LIVED EV ENTS Event-based ICs and EALs define a var iety of specific occurrences that have potential or ture, some of these events may be short-lived and, actual safety significance. By their na 9 thus, over before the emergency classification assessment can be completed. If an event occurs that meets or exceeds an EAL, the associated EAL must be declared regardless of its continued presence at the time of declaration. Examples of such events include a failure of the reactor protection system to automatically scram/trip the reactor followed by a successful manual scram/trip or an earthquake. 2.8 CLASSIFICATION OF TRANSIENT CONDITIONS Many of the ICs and/or EALs contained in this document employ time-based criteria. These criteria will require that the IC/EAL conditions be present for a defined period of time before an emergency declaration is warranted. In cases where no time-based criterion is specified, it is recognized that some transient conditions may cause an EAL to be met for a brief period of time. The following guidance should be applied to the classification of these conditions. EAL momentarily met during expected plant response -In instances where an EAL is briefly met during an expected (normal) plant response, an emergency declaration is not warranted provided that associated systems and components are operating as expected, and operator actions are performed in accordance with procedures. EAL momentarily met but the condition is corrected prior to an emergency declaration -If an operator takes prompt manual action to address a condition, and the action is successful in correcting the condition prior to the emergency declaration, then the applicable EAL is not considered met and the associated emergency declaration is not required. For illustrative purposes, consider the following example. An ATWS occurs and the auxiliary feedwater system fails to automatically start. Steam generator levels rapidly decrease and the plant enters an inadequate RCS heat removal condition (a potential loss of both the fuel clad and RCS barriers). If an operator manually starts the'auxiliary feedwater system in accordance with an EOP step and clears the inadequate RCS heat removal condition prior to an emergency declaration, then the classification should be based on the A TWS only. It is important to stress that the 15-minute emergency classification assessment period is not a "grace period" during which a classification may be delayed to allow the performance of a corrective action that would obviate the need to classify the event; emergency classification assessments must be deliberate and timely, with no undue delays. The provision discussed above addresses only those rapidly evolving situations where an operator is able to take a successful corrective action prior to the STED/SED completing the review and steps necessary to make the emergency declaration. This provision is included to ensure that any public protective actions resulting from the emergency classification are truly warranted by the plant conditions. 2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION In some cases, an EAL may be met but the emergency classification was not made at the time of the event or condition. This situation can occur when personnel discover that an event or condition existed which met an EAL, but no emergency was declared, and the event or condition no longer exists at the time of discovery. This may be due to the event 10 or condition not being recognized at the time or an error that was made in the emergency classification process. In these cases, no emergency declaration is warranted; however, the guidance contained in NUREG-1022 is applicable. Specifically, the event should be reported to the NRC in accordance with 10 CFR § 50.72 within one hour of the discovery of the undeclared event or condition. The licensee should also notify appropriate State and local agencies in accordance with the agreed upon arrangements. 11 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS GENERAL EMERGENCY RGl Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Op. Modes: All RG2 Spent fuel pool level cannot be restored to at least 1.5 ft (Level 3) for 60 minutes or longer. Op. Modes: All SITE AREA EMERGENCY RSl Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Op. Modes: All RS2 Spent fuel pool level at 1.5 ft. (Level 3). Op. Modes: All ALERT RAl Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Op. Modes: All RA2 Significant lowering of water level above, or damage to, irradiated fuel. Op. Modes: All RA3 Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown. Op. Modes: All 12 UNUSUAL EVENT RUl Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Op. Modes: All RU2 UNPLANNED loss of water level above irradiated fuel. Op. Modes: All RG1 ECL: General Emergency Initiating Condition: Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3) Notes: | Basis information should be readily available to be referenced, if necessary, by the Short Term Emergency Director/Site Emergency Director (STED/SED). | ||
For example, a copy 5 of the basis document could be maintained in the appropriate emergency response facilities. | |||
Because the information in a basis document can affect emergency classification decision-making (e.g., the STED/SED refers to it during an event), the NRC staff expects that changes to the basis document will be evaluated in accordance with the provisions of 10 CFR 50.54(q). | |||
1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA The criteria/values used in several EALs and fission product barrier thresholds may be drawn from AOPs and EOPs. This approach is intended to maintain good alignment between operational diagnoses and emergency classification assessments. | |||
Appropriate administrative controls are in place to ensure that a subsequent change to an AOP or BOP is screened to determine if an evaluation pursuant to 10 CFR 50.54(q) is required. | |||
6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS 2.1 GENERAL CONSIDERATIONS When making an emergency classification, the STED/SED must consider all information having a bearing on the proper assessment of an Initiating Condition (IC). This includes the Emergency Action Level (EAL) plus the associated Operating Mode Applicability, Notes and the informing Basis information. | |||
In the Recognition Category F matrices, EALs are referred to as Fission Product Barrier Thresholds; the thresholds serve the same function as an EAL. NRC regulations require the licensee to establish and maintain the capability to assess, classify, and declare an emergency condition within 15 minutes after the availability of indications to plant operators that an emergency action level has been exceeded and to promptly declare the emergency condition as soon as possible following identification of the appropriate emergency classification level. The NRC staff has provided guidance on implementing this requirement in NSIR/DPR-ISG-01, Interim Staff Guidance, Emergency Planning for Nuclear Power Plants. All emergency classification assessments should be based upon valid indications, reports or conditions. | |||
A valid indication, report, or condition, is one that has been verified through appropriate means such that there is no doubt regarding the indicator's operability, the condition's existence, or the report's accuracy. | |||
For example, validation could be accomplished through an instrument channel check, response on related or redundant indicators, or direct observation by plant personnel. | |||
The validation of indications should be completed in a manner that supports timely emergency declaration. | |||
For ICs and EALs that have a stipulated time duration, the STED/SED should not wait until the applicable time has elapsed, but should declare the event as soon as it is determined that the condition has exceeded, or will likely exceed, the applicable time. If an ongoing radiological release is detected and the release start time is unknown, it should be assumed that the release duration specified in the IC/EAL has been exceeded, absent data to the contrary. | |||
A planned work activity that results in an expected event or condition which meets or exceeds an EAL does not warrant an emergency declaration provided that 1) the activity proceeds as planned and 2) the plant remains within the limits imposed by the operating license. | |||
Such activities include planned work to test, manipulate, repair, maintain or modify a system or component. | |||
In these cases, the controls associated with the planning, preparation and execution of the work will ensure that compliance is maintained with all aspects of the operating license provided that the activity proceeds and concludes as expected. | |||
Events or conditions of this type may be subject to the reporting requirements of 10 § CFR 50.72. The assessment of some EALs is based on the results of analyses that are necessary to ascertain whether a specific EAL threshold has been exceeded; the EAL and/or the associated basis discussion will identify the necessary analysis. | |||
In these cases, the 15-minute declaration period starts with the availability of the analysis results that show the threshold to be exceeded (i.e., this is the time that the EAL information is first available). | |||
7 The NRC expects licensees to establish the capability to initiate and complete related analyses within a reasonable period of time. While the EALs have been developed to address a full spectrum of possible events and conditions which may warrant emergency classification, a provision for classification based on operator/management experience and judgment is still necessary. | |||
The NEI 99-01 scheme provides the STED/SED with the ability to classify events and conditions based upon judgment using EALs that are consistent with the Emergency Classification Level (ECL) definitions (refer to Category H). The STED/SED will need to determine if the effects or consequences of the event or condition reasonably meet or exceed a particular ECL definition. | |||
A similar provision is incorporated into the Fission Product Barrier Tables; judgment may be used to determine the status of a fission product barrier. | |||
2.2 CLASSIFICATION METHODOLOGY To make an emergency classification, the user will compare an event or condition (i.e., the relevant plant indications and reports) to an EAL(s) and determine ifthe EAL has been met or exceeded. | |||
The evaluation of an EAL(s) must be consistent with the related Operating Mode Applicability and Notes. If an EAL has been met or exceeded, then the IC is considered met and the associated ECL is declared in accordance with plant procedures. | |||
When assessing an EAL that specifies a time duration for the off-normal condition, the "clock" for the EAL time duration runs concurrently with the emergency classification process "clock." | |||
For a full discussion of this timing requirement, refer to ISG-01. 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS When multiple emergency events or conditions are present, the user will identify all met or exceeded EALs. The highest applicable ECL identified during this review is declared. | |||
For example: | |||
* If an.Alert EAL and a Site Area Emergency EAL are met, a Site Area Emergency should be declared. | |||
There is no "additive" effect from multiple EALs meeting the same ECL. For example: | |||
* If two Alert EALs are met, an Alert should be declared. | |||
Related guidance concerning classification of rapidly escalating events or conditions is provided in Regulatory Issue Summary (RIS) 2007-02, Clarification ofNRC Guidance for Emergency Notifications During Quickly Changing Events. 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION The mode in effect at the time that an event or condition | |||
: occurred, and prior to any plant or operator | |||
: response, is the mode that determines whether or not an IC is applicable. | |||
If an event or condition occurs, and results in a mode change before the emergency is declared, the emergency classification level is still based on the mode that existed at the time that the event or condition was initiated (and not when it was declared). | |||
8 2.5 2.6 2.7 Once a different mode is reached, any n ew event or condition, not related to the original classification should be evaluated against the ICs ode at the time of the new event or condition. | |||
event or condition, requiring emergency and EALs applicable to the operating m For events that occur in Cold Shutdown or Refueling, escalation is via EALs that are fueling modes, even if Hot Shutdown (or a higher plant response. | |||
In particular, the fission product nts that initiate in the Hot Shutdown mode or applicable in the Cold Shutdown or Re mode) is entered during the subsequent barrier EALs are applicable only to eve higher. CLASSIFICATION OF IMMINENT CONDI TIO NS Although EALs provide specific thresh olds, the STED/SED must remain alert to events or exceeding an EAL within a relatively short L is IMMINENT). | |||
If, in the judgment of the or conditions that could lead to meeting period of time (i.e., a change in the EC STED/SED, meeting an EAL is I MMINENT, the emergency classification should be made as if the EAL has been met. Whil e applicable to all emergency classification ortant at the higher emergency classification levels, this approach is particularly imp levels since it provides additional time for implementation of protective measures. | |||
EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING An ECL may be downgraded when the event or condition that meets the highest IC and ecific downgrading requirements are met. If priate, the new ECL would then be based on a EAL no longer exists, and other site-sp downgrading the ECL is deemed appro lower applicable IC(s) and EAL(s). Th e ECL may also simply be terminated. | |||
The following approach to downgradin g or terminating an ECL is recommended. | |||
ECL Unusual Event Alert Site Area Emergency with no long-term plant damage Site Area Emergency with long-term plant damage General Emergency Ter Action When Condition No Longer Exists minate the emergency in accordance with plant edures. proc Dow ngrade or terminate the emergency in rdance with plant procedures. | |||
acco Dow ngrade or terminate the emergency in rdance with plant procedures. | |||
acco Ter minate the emergency and enter recovery in rdance with plant procedures. | |||
acco Ten acco ninate the emergency and enter recovery in rdance with plant procedures. | |||
CLASSIFICATION OF SHORT-LIVED EV ENTS Event-based ICs and EALs define a var iety of specific occurrences that have potential or ture, some of these events may be short-lived and, actual safety significance. | |||
By their na 9 thus, over before the emergency classification assessment can be completed. | |||
If an event occurs that meets or exceeds an EAL, the associated EAL must be declared regardless of its continued presence at the time of declaration. | |||
Examples of such events include a failure of the reactor protection system to automatically scram/trip the reactor followed by a successful manual scram/trip or an earthquake. | |||
2.8 CLASSIFICATION OF TRANSIENT CONDITIONS Many of the ICs and/or EALs contained in this document employ time-based criteria. | |||
These criteria will require that the IC/EAL conditions be present for a defined period of time before an emergency declaration is warranted. | |||
In cases where no time-based criterion is specified, it is recognized that some transient conditions may cause an EAL to be met for a brief period of time. The following guidance should be applied to the classification of these conditions. | |||
EAL momentarily met during expected plant response | |||
-In instances where an EAL is briefly met during an expected (normal) plant response, an emergency declaration is not warranted provided that associated systems and components are operating as expected, and operator actions are performed in accordance with procedures. | |||
EAL momentarily met but the condition is corrected prior to an emergency declaration | |||
-If an operator takes prompt manual action to address a condition, and the action is successful in correcting the condition prior to the emergency declaration, then the applicable EAL is not considered met and the associated emergency declaration is not required. | |||
For illustrative | |||
: purposes, consider the following example. | |||
An ATWS occurs and the auxiliary feedwater system fails to automatically start. Steam generator levels rapidly decrease and the plant enters an inadequate RCS heat removal condition (a potential loss of both the fuel clad and RCS barriers). | |||
If an operator manually starts the'auxiliary feedwater system in accordance with an EOP step and clears the inadequate RCS heat removal condition prior to an emergency declaration, then the classification should be based on the A TWS only. It is important to stress that the 15-minute emergency classification assessment period is not a "grace period" during which a classification may be delayed to allow the performance of a corrective action that would obviate the need to classify the event; emergency classification assessments must be deliberate and timely, with no undue delays. The provision discussed above addresses only those rapidly evolving situations where an operator is able to take a successful corrective action prior to the STED/SED completing the review and steps necessary to make the emergency declaration. | |||
This provision is included to ensure that any public protective actions resulting from the emergency classification are truly warranted by the plant conditions. | |||
2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION In some cases, an EAL may be met but the emergency classification was not made at the time of the event or condition. | |||
This situation can occur when personnel discover that an event or condition existed which met an EAL, but no emergency was declared, and the event or condition no longer exists at the time of discovery. | |||
This may be due to the event 10 or condition not being recognized at the time or an error that was made in the emergency classification process. | |||
In these cases, no emergency declaration is warranted; | |||
: however, the guidance contained in NUREG-1022 is applicable. | |||
Specifically, the event should be reported to the NRC in accordance with 10 CFR § 50.72 within one hour of the discovery of the undeclared event or condition. | |||
The licensee should also notify appropriate State and local agencies in accordance with the agreed upon arrangements. | |||
11 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS GENERAL EMERGENCY RGl Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Op. Modes: All RG2 Spent fuel pool level cannot be restored to at least 1.5 ft (Level 3) for 60 minutes or longer. Op. Modes: All SITE AREA EMERGENCY RSl Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Op. Modes: All RS2 Spent fuel pool level at 1.5 ft. (Level 3). Op. Modes: All ALERT RAl Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Op. Modes: All RA2 Significant lowering of water level above, or damage to, irradiated fuel. Op. Modes: All RA3 Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown. | |||
Op. Modes: All 12 UNUSUAL EVENT RUl Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Op. Modes: All RU2 UNPLANNED loss of water level above irradiated fuel. Op. Modes: All RG1 ECL: General Emergency Initiating Condition: | |||
Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3) Notes: | |||
* The STED/SED should declare the General Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | * The STED/SED should declare the General Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | ||
* If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | * If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | ||
* If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | * If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | ||
* The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. ( 1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Readin!! RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec Time After Shutdown Readin2 ::::; 1 hr > 1 hr to ::::; 2 hrs RM-6481-1 * (MSL A) 1310 mR/hr 1060 mR/hr RM-6482-1 * (MSL B) 1310 mR/hr 1060 mR/hr RM-6482-2* (MSL C) 1310 mR/hr 1060 mR/hr RM-6481-2* (MSL D) 1310 mR/hr 1060 mR/hr | * The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. | ||
* With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A. (2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE at or beyond the site boundary. OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary: Basis: Closed window dose rates greater than 1000 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 5000 mrem for one hour of inhalation. This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to the EPA Protective Action Guides (PAGs). It includes both 13 monitored and un-monitored releases. Releases of this magnitude will require implementation of protective actions for the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. The TEDE dose is set at the EPA PAG of 1,000 mrem while the 5,000 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. 14 RG2 ECL: General Emergency Initiating Condition: Spent fuel pool level cannot be restored to at leastl.5 ft. (Level 3) for 60 minutes or longer. Operating Mode Applicability: All Emergency Action Levels: Note: The STED/SED should declare the General Emergency promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. (1) Spent fuel pool level cannot be restored to at least 1.5 ft. above the fuel racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to a prolonged uncovery of spent fuel. This condition will lead to fuel damage and a radiological release to the environment. Post-Fukushima order EA-12-051 required the installation of reliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. It is recognized that this IC would likely not be met until well after another General Emergency IC was met; however, it is included to provide classification diversity. 15 RS1 ECL: Site Area Emergency Initiating Condition: Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3) Notes: | ( 1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Readin!! | ||
RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec Time After Shutdown Readin2 ::::; 1 hr > 1 hr to ::::; 2 hrs RM-6481-1 | |||
* (MSL A) 1310 mR/hr 1060 mR/hr RM-6482-1 | |||
* (MSL B) 1310 mR/hr 1060 mR/hr RM-6482-2* | |||
(MSL C) 1310 mR/hr 1060 mR/hr RM-6481-2* | |||
(MSL D) 1310 mR/hr 1060 mR/hr | |||
* With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A. | |||
(2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE at or beyond the site boundary. | |||
OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary: | |||
Basis: Closed window dose rates greater than 1000 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 5000 mrem for one hour of inhalation. | |||
This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to the EPA Protective Action Guides (PAGs). It includes both 13 monitored and un-monitored releases. | |||
Releases of this magnitude will require implementation of protective actions for the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. | |||
The TEDE dose is set at the EPA PAG of 1,000 mrem while the 5,000 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. | |||
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | |||
14 RG2 ECL: General Emergency Initiating Condition: | |||
Spent fuel pool level cannot be restored to at leastl.5 ft. (Level 3) for 60 minutes or longer. Operating Mode Applicability: | |||
All Emergency Action Levels: Note: The STED/SED should declare the General Emergency promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. | |||
(1) Spent fuel pool level cannot be restored to at least 1.5 ft. above the fuel racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to a prolonged uncovery of spent fuel. This condition will lead to fuel damage and a radiological release to the environment. | |||
Post-Fukushima order EA-12-051 required the installation of reliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. | |||
It is recognized that this IC would likely not be met until well after another General Emergency IC was met; however, it is included to provide classification diversity. | |||
15 RS1 ECL: Site Area Emergency Initiating Condition: | |||
Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3) Notes: | |||
* The STED/SED should declare the Site Area Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Site Area Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | ||
* If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | * If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | ||
* If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | * If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | ||
* The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. * (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+7 uCi/sec Time After Shutdown Reading :::; 1 hr > 1 hr to :::; 2 hrs RM-6481-1 * (MSL A) 130 mR/hr 100 mR/hr RM-6482-1 * (MSL B) 130 mR/hr 100 mR/hr RM-6482-2* (MSL C) 130 mR/hr 100 mR/hr RM-6481-2* (MSL D) 130 mR/hr 100 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A. (2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary. OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary: Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 500 mrem for one hour of inhalation. 16 Basis: This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to 10% of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases. Releases of this magnitude are associated with the failure of plant systems needed for the protection of the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. The TEDE dose is set at 10% of the EPA PAG of 1,000 mrem while the 500 mrem thyroid CDE was established in consideration of the 1:5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. Escalation of the emergency classification level would be via IC RGI. 17 _ _j RS2 ECL: Site Area Emergency Initiating Condition: Spent fuel pool level at 1.5 ft.(Level 3) Operating Mode Applicability: All Emergency Action Levels: (1) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220) .. Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to IMMINENT fuel damage. This condition entails major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration. Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. It is recognized that this IC would likely not be met until well after another Site Area Emergency IC was met; however, it is included to provide classification diversity. Escalation of the emergency classification level would be via IC RG 1 or RG2. 18 RA1 ECL: Alert Initiating Condition: Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3 or 4) Notes: | * The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. | ||
* (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+7 uCi/sec Time After Shutdown Reading :::; 1 hr > 1 hr to :::; 2 hrs RM-6481-1 | |||
* (MSL A) 130 mR/hr 100 mR/hr RM-6482-1 | |||
* (MSL B) 130 mR/hr 100 mR/hr RM-6482-2* | |||
(MSL C) 130 mR/hr 100 mR/hr RM-6481-2* | |||
(MSL D) 130 mR/hr 100 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A. | |||
(2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary. | |||
OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary: | |||
Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 500 mrem for one hour of inhalation. | |||
16 Basis: This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to 10% of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases. | |||
Releases of this magnitude are associated with the failure of plant systems needed for the protection of the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. | |||
The TEDE dose is set at 10% of the EPA PAG of 1,000 mrem while the 500 mrem thyroid CDE was established in consideration of the 1:5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. | |||
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | |||
Escalation of the emergency classification level would be via IC RGI. 17 _ _j RS2 ECL: Site Area Emergency Initiating Condition: | |||
Spent fuel pool level at 1.5 ft.(Level | |||
: 3) Operating Mode Applicability: | |||
All Emergency Action Levels: (1) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220) .. Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to IMMINENT fuel damage. This condition entails major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration. | |||
Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. | |||
It is recognized that this IC would likely not be met until well after another Site Area Emergency IC was met; however, it is included to provide classification diversity. | |||
Escalation of the emergency classification level would be via IC RG 1 or RG2. 18 RA1 ECL: Alert Initiating Condition: | |||
Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3 or 4) Notes: | |||
* The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | ||
* If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | * If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes. | ||
* If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | * If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | ||
* The pre-calculated effluent monitor.values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+6 uCi/sec RM-6481-1 * (MSL A) 10 mR/hr RM-6482-1 * (MSL B) 10 mR/hr RM-6482-2* (MSL C) 10 mR/hr RM-6481-2* (MSL D) 10 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to l-FW-P-37A. (2) Dose assessment using actual meteorology indicates doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary. OR (3) Analysis of a liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure. OR (4) Field survey results indicate EITHER of the following at or beyond the site boundary: | * The pre-calculated effluent monitor.values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available. | ||
(1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+6 uCi/sec RM-6481-1 | |||
* (MSL A) 10 mR/hr RM-6482-1 | |||
* (MSL B) 10 mR/hr RM-6482-2* | |||
(MSL C) 10 mR/hr RM-6481-2* | |||
(MSL D) 10 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to l-FW-P-37A. | |||
(2) Dose assessment using actual meteorology indicates doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary. | |||
OR (3) Analysis of a liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure. | |||
OR (4) Field survey results indicate EITHER of the following at or beyond the site boundary: | |||
* Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer. | * Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer. | ||
* Analyses of field survey samples indicate thyroid CDE greater than 50 mrem for one hour of inhalation. 19 Basis: This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual off site doses greater than or equal to 1 % of the EPA Protective Action Guides (PA Gs). It includes both monitored and un-monitored releases. Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. Escalation of the emergency classification level would be via IC RSI. 20 RA2 ECL: Alert Initiating Condition: Significant lowering of water level above, or damage to, irradiated fuel. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3) (1) Uncovery of irradiated fuel in the REFUELING PATHWAY. OR (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by high-alarm, or reading in excess of the current high-alarm setpoint on ANY of the following radiation monitors: OR RM-6518-1 FSB High Range RM-6562-1 FSB Vent RM-6535A-1 Manipulator Crane RM-6535B-1 Manipulator Crane (3) Lowering of spent fuel pool level to 12 ft. 3 in. above the fuel racks on SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: REFUELING PATHWAY: The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses events that have caused IMMINENT or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment. As such, they represent an actual or potential substantial degradation of the level of safety of the plant. -This IC applies to irradiated fuel that is licensed for dry storage up to the point that the loaded storage cask is sealed. Once sealed, damage to a loaded cask causing loss of the CONFINEMENT BOUNDARY is classified in accordance with IC EUl. Escalation of the emergency would be based on either Recognition Category R or C ICs. EAL#l This EAL escalates from RU2 in that the loss of level, in the affected portion of the REFUELING PATHWAY, is of sufficient magnitude to have resulted in uncovery of irradiated fuel. Indications of irradiated fuel uncovery may include direct or indirect visual observation, as well as significant changes in water and radiation levels, or other plant parameters. Computational aids may also be used. Classification of an event using this EAL should be based on the totality of available indications, reports and observations. While an area radiation monitor could detect an increase in a dose rate due to a lowering of water level in some portion of the REFUELING PATHWAY, the reading may not be a reliable indication of whether or not the fuel is actually uncovered. To the degree possible, readings should be considered in combination with other available indications of inventory loss. 21 A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. EAL#2 This EAL addresses a release of radioactive material caused by mechanical damage to irradiated fuel. Damaging events may include the dropping, bumping or binding of an assembly, or dropping a heavy load onto an assembly. A rise in readings on radiation monitors should be considered in conjunction with in-plant reports or observations of a potential fuel damaging event. EAL#3 Spent fuel pool water level at this value is within the lower end of the level range necessary to prevent significant dose consequences from direct gamma radiation to personnel performing operations in the vicinity of the spent fuel pool. This condition reflects a significant loss of spent fuel pool water inventory and thus it is also a precursor to a loss of the ability to adequately cool the irradiated fuel assembles stored in the pool. Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. Escalation of the emergency classification level would be via ICs RSI or RS2. 22 RA3 ECL: Alert Initiating Condition: Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown. Operating Mode Applicability: All Emergency Action Levels: (1 or 2) Note: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted. (1) Dose rate greater than 15 mR/hr in ANY of the following areas: Control Room RM6550 Central Alarm Station (CAS) by survey Secondary Alarm Station (SAS) by survey OR (2) An UNPLANNED event results in radiation levels that prohibit or IMPEDE access to any of the following plant rooms or areas: Table HI Area Mode Primary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation -26 ft elevation Turbine Building 21 ft elevation 1, 2, 3 50 ft elevation Essential Switchgear Rooms 1, 2, 3, 4 Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation Containment 3,4 RHR/CBS Equipment Vaults 3,4 23 Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses elevated radiation levels in certain plant rooms/areas sufficient to preclude or impede personnel from performing actions necessary to maintain normal plant operation, or to perform a normal plant cooldown and shutdown. As such, it represents an actual or potential substantial degradation of the level of safety of the plant. The STED/SED should consider the cause of the increased radiation levels and determine if another IC may be applicable. For EAL #2, an Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the elevated radiation levels. The emergency classification is not contingent upon whether entry is actually necessary at the time of the increased radiation levels. Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area. An emergency declaration is not warranted ifany of the following conditions apply. | * Analyses of field survey samples indicate thyroid CDE greater than 50 mrem for one hour of inhalation. | ||
* The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the elevated radiation levels). For example, the plant is in Mode I when the radiation increase occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room until Mode 4. | 19 Basis: This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual off site doses greater than or equal to 1 % of the EPA Protective Action Guides (PA Gs). It includes both monitored and un-monitored releases. | ||
Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. | |||
The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established. | |||
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | |||
Escalation of the emergency classification level would be via IC RSI. 20 RA2 ECL: Alert Initiating Condition: | |||
Significant lowering of water level above, or damage to, irradiated fuel. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3) (1) Uncovery of irradiated fuel in the REFUELING PATHWAY. | |||
OR (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by high-alarm, or reading in excess of the current high-alarm setpoint on ANY of the following radiation monitors: | |||
OR RM-6518-1 FSB High Range RM-6562-1 FSB Vent RM-6535A-1 Manipulator Crane RM-6535B-1 Manipulator Crane (3) Lowering of spent fuel pool level to 12 ft. 3 in. above the fuel racks on SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: REFUELING PATHWAY: | |||
The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses events that have caused IMMINENT or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment. | |||
As such, they represent an actual or potential substantial degradation of the level of safety of the plant. -This IC applies to irradiated fuel that is licensed for dry storage up to the point that the loaded storage cask is sealed. Once sealed, damage to a loaded cask causing loss of the CONFINEMENT BOUNDARY is classified in accordance with IC EUl. Escalation of the emergency would be based on either Recognition Category R or C ICs. EAL#l This EAL escalates from RU2 in that the loss of level, in the affected portion of the REFUELING | |||
: PATHWAY, is of sufficient magnitude to have resulted in uncovery of irradiated fuel. Indications of irradiated fuel uncovery may include direct or indirect visual observation, as well as significant changes in water and radiation levels, or other plant parameters. | |||
Computational aids may also be used. Classification of an event using this EAL should be based on the totality of available indications, reports and observations. | |||
While an area radiation monitor could detect an increase in a dose rate due to a lowering of water level in some portion of the REFUELING | |||
: PATHWAY, the reading may not be a reliable indication of whether or not the fuel is actually uncovered. | |||
To the degree possible, readings should be considered in combination with other available indications of inventory loss. 21 A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. EAL#2 This EAL addresses a release of radioactive material caused by mechanical damage to irradiated fuel. Damaging events may include the dropping, bumping or binding of an assembly, or dropping a heavy load onto an assembly. | |||
A rise in readings on radiation monitors should be considered in conjunction with in-plant reports or observations of a potential fuel damaging event. EAL#3 Spent fuel pool water level at this value is within the lower end of the level range necessary to prevent significant dose consequences from direct gamma radiation to personnel performing operations in the vicinity of the spent fuel pool. This condition reflects a significant loss of spent fuel pool water inventory and thus it is also a precursor to a loss of the ability to adequately cool the irradiated fuel assembles stored in the pool. Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling. | |||
Escalation of the emergency classification level would be via ICs RSI or RS2. 22 RA3 ECL: Alert Initiating Condition: | |||
Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown. | |||
Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2) Note: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted. | |||
(1) Dose rate greater than 15 mR/hr in ANY of the following areas: Control Room RM6550 Central Alarm Station (CAS) by survey Secondary Alarm Station (SAS) by survey OR (2) An UNPLANNED event results in radiation levels that prohibit or IMPEDE access to any of the following plant rooms or areas: Table HI Area Mode Primary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation | |||
-26 ft elevation Turbine Building 21 ft elevation 1, 2, 3 50 ft elevation Essential Switchgear Rooms 1, 2, 3, 4 Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation Containment 3,4 RHR/CBS Equipment Vaults 3,4 23 Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses elevated radiation levels in certain plant rooms/areas sufficient to preclude or impede personnel from performing actions necessary to maintain normal plant operation, or to perform a normal plant cooldown and shutdown. | |||
As such, it represents an actual or potential substantial degradation of the level of safety of the plant. The STED/SED should consider the cause of the increased radiation levels and determine if another IC may be applicable. | |||
For EAL #2, an Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the elevated radiation levels. The emergency classification is not contingent upon whether entry is actually necessary at the time of the increased radiation levels. Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area. | |||
An emergency declaration is not warranted ifany of the following conditions apply. | |||
* The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the elevated radiation levels). | |||
For example, the plant is in Mode I when the radiation increase occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room until Mode 4. | |||
* The increased radiation levels are a result of a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area. | * The increased radiation levels are a result of a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area. | ||
* The action for which room/area entry is required is of an administrative or record keeping nature. | * The action for which room/area entry is required is of an administrative or record keeping nature. | ||
* The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. 24 RU1 ECL: Notification of Unusual Event Initiating Condition: Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Operating Mode Applicability: All Emergency Action Levels: (1 or 2) Notes: | * The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. 24 RU1 ECL: Notification of Unusual Event Initiating Condition: | ||
Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2) Notes: | |||
* The STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded. | ||
* If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes. | * If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes. | ||
* If the effluent flow past an efflue:µt monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. 1) a Valid reading on ANY of the following effluent monitors greater than 2 times the value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WTT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown) RM-6473-1 (WT LIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes. OR 2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the ODCM limits for 60 minutes or longer. Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time. It includes any gaseous or liquid radiological release, monitored or un-monitored, including those for which a radioactivity discharge permit is normally prepared. Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment. Further, there are administrative controls established to prevent unintentional releases, and to control and monitor intentional releases. The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls. 25 Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. Classification based on effluent monitor readings assumes that a release path to the environment is established. If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. Releases should not be prorated or averaged. For example, a release exceeding 4 times release limits for 3 0 minutes does not meet the EAL. EAL # 1 -This EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways. EAL #1 addresses radioactivity releases, that for whatever reason, cause effluent radiation monitor readings to exceed two times the ODCM limit and releases are not terminated within 60 minutes. This alarm setpoint may be associated with a planned batch release, or a continuous release path. In either case, the setpoint is established by the ODCM. Indexing the EAL threshold to the ODCM setpoints in this manner insures that the EAL threshold will never be less than the setpoint established by a specific discharge permit. The discharge flowpaths associated with RM-6509-1, 6521-1, 6519-1, and 6473-1 have automatic and manual flow isolation capability. The EAL wording addresses a situation where a residual source term exists in a discharge flowpath AFTER the flowpath has been isolated, and the associated radiation monitor remains at values above 2 times the value of the current alarm setpoint. EAL l .b ensures that the Initiating Condition (IC) intent of "to the environment" is met. The 60-minute assessment clock starts at the same time for both EAL l .a and l .b (i.e., clocks run concurrently). There must be a release to the environment (i.e., the flowpath cannot be isolated) during the same period that a monitor value is greater than 2 times the value of the current high-alarm setpoint. EAL #2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental surveys, particularly on unmonitored pathways. Escalation of the emergency classification level would be via IC RAl. 26 RU2 ECL: Notification of Unusual Event Initiating Condition: UNPLANNED loss of water level above irradiated fuel. Operating Mode Applicability: All Emergency Action Levels: (1) a. UNPLANNED water level drop in the REFUELING PATHWAY as indicated by ANY of the following: Basis: 1-SF-LI-2607 (Spent Fuel Pool Level) 1-SF-LI-2629 or 1-SF-LIT-2629-1 (Reactor Refuel Cavity Level) AND b. UNPLANNED rise in area radiation levels as indicated by ANY of the following radiation monitors: RM-6535-A-l, Containment Manipulator Crane RM-6535-B-1, Containment Manipulator Crane RM-6549-1, FSB Spent Fuel Range Low RM-6518-1, FSB Spent Fuel Range Hi UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known oi unknown. REFUELING PATHWAY: The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses a decrease in water level above irradiated fuel sufficient to cause elevated radiation levels. This condition could be a precursor to a more serious event and is also indicative of a minor loss in the ability to control radiation levels within the plant. It is therefore a potential degradation in the level of safety of the plant. A water level decrease will be primarily determined by indications from available level instrumentation. Other sources of level indications may include reports from plant personnel or video camera observations (if available). A significant drop in the water level may also cause an increase in the radiation levels of adjacent areas that can be detected by monitors in those locations. The effects of planned evolutions should be considered. For example, a refueling bridge area radiation monitor reading may increase due to planned evolutions such as lifting of the reactor vessel head or movement of a fuel assembly. Note that this EAL is applicable only in cases where the elevated reading is due to an UNPLANNED loss of water level. A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. Escalation of the emergency classification level would be via IC RA2. 27 4 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS Recognition Category "C" Initiating Condition Matrix GENERAL SITE AREA ALERT UNUSUAL EVENT EMERGENCY EMERGENCY CGl Loss ofreactor CSl Loss of reactor CAl Loss of reactor CUl UNPLANNED vessel/RCS inventory vessel/RCS inventory vessel/RCS inventory. loss of reactor affecting fuel clad affecting core decay Op. Modes: 5, 6 vessel/RCS inventory integrity with heat removal for 15 minutes or containment capability. longer. challenged. Op. Modes: 5, 6 Op. Modes: 5, 6 Op. Modes: 5, 6 CA2 Loss of all CU2 Loss of all but offsite and all onsite one AC power source AC power to to emergency buses for emergency buses for 15 minutes or longer. 15 minutes or longer. Op. Modes: 5, 6, Op. Modes: 5, 6, De fueled De fueled CA3 Inability to CU3 UNPLANNED maintain the plant in increase in RCS cold shutdown. temperature. Op. Modes: 5, 6 Op. Modes: Ji 6 CU4 Loss of Vital DC power for 15 minutes or longer. Op. Modes: 5, 6 CU5 Loss of all onsite or offsite communications capabilities. Op. Modes: 5, 6, De fueled CA6 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 5, 6 28 CG1 ECL: General Emergency Initiating Condition: Loss of reactor vessel/RCS inventory affecting fuel clad integrity with containment challenged. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the General Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded. (1) OR (2) a. RVLIS Full Range< 55% (-141.5 in) for 30 minutes or longer. AND b. ANY indication from the Containment Challenge Table C2. a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following: RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery. Visual observation. AND c. ANY indication from the Containment Challenge Table C2. Containment Challenge Table C2 CONTAINMENT INTEGRITY not established | * If the effluent flow past an efflue:µt monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | ||
* Containment H2 concentration :=::: 6% UNPLANNED increase in containment pressure *If CONTAINMENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. | : 1) a Valid reading on ANY of the following effluent monitors greater than 2 times the value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WTT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown) | ||
* 29 CONTAINMENT INTEGRITY: The procedurally defined conditions or actions taken to secure containment and its associated structures, systems, and components as a functional barrier to fission product release under shutdown conditions. This IC addresses the inability to restore and maintain reactor vessel level above the top of active fuel with containment challenged. This condition represents actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity. Releases can be reasonably expected to exceed EPA PAG exposure levels off site for more than the immediate site area. Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable. With CONTAINJ\1ENT INTEGRITY not established, there is a high potential for a direct and unmonitored release of radioactivity to the environment. If CONT AINJ\1ENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity. It therefore represents a challenge to Containment integrity. In the early stages of a core uncovery event, it is unlikely that hydrogen buildup due to a core uncovery could result in an explosive gas mixture in containment. If all installed hydrogen gas monitors are out-of-service during an event leading to fuel cladding damage, it may not be possible to obtain a containment hydrogen gas concentration reading as ambient conditions within the containment will preclude personnel access. During periods when installed containment hydrogen gas monitors are out-of-service, operators may use the other listed indications to assess whether or not containment is challenged. Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. In EAL 2.b, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties). It also allows sufficient time for performance of actions to terminate leakage, recover inventory control/makeup equipment and/or restore level monitoring. The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. 30 RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanqe) -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge. 10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management. | RM-6473-1 (WT LIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes. | ||
OR 2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the ODCM limits for 60 minutes or longer. Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time. It includes any gaseous or liquid radiological | |||
: release, monitored or un-monitored, including those for which a radioactivity discharge permit is normally prepared. | |||
Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment. | |||
: Further, there are administrative controls established to prevent unintentional | |||
: releases, and to control and monitor intentional releases. | |||
The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls. | |||
25 Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions. | |||
Classification based on effluent monitor readings assumes that a release path to the environment is established. | |||
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes. | |||
Releases should not be prorated or averaged. | |||
For example, a release exceeding 4 times release limits for 3 0 minutes does not meet the EAL. EAL # 1 -This EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways. | |||
EAL #1 addresses radioactivity | |||
: releases, that for whatever reason, cause effluent radiation monitor readings to exceed two times the ODCM limit and releases are not terminated within 60 minutes. | |||
This alarm setpoint may be associated with a planned batch release, or a continuous release path. In either case, the setpoint is established by the ODCM. Indexing the EAL threshold to the ODCM setpoints in this manner insures that the EAL threshold will never be less than the setpoint established by a specific discharge permit. The discharge flowpaths associated with RM-6509-1, 6521-1, 6519-1, and 6473-1 have automatic and manual flow isolation capability. | |||
The EAL wording addresses a situation where a residual source term exists in a discharge flowpath AFTER the flowpath has been isolated, and the associated radiation monitor remains at values above 2 times the value of the current alarm setpoint. | |||
EAL l .b ensures that the Initiating Condition (IC) intent of "to the environment" is met. The 60-minute assessment clock starts at the same time for both EAL l .a and l .b (i.e., clocks run concurrently). | |||
There must be a release to the environment (i.e., the flowpath cannot be isolated) during the same period that a monitor value is greater than 2 times the value of the current high-alarm setpoint. | |||
EAL #2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental | |||
: surveys, particularly on unmonitored pathways. | |||
Escalation of the emergency classification level would be via IC RAl. 26 RU2 ECL: Notification of Unusual Event Initiating Condition: | |||
UNPLANNED loss of water level above irradiated fuel. Operating Mode Applicability: | |||
All Emergency Action Levels: (1) a. UNPLANNED water level drop in the REFUELING PATHWAY as indicated by ANY of the following: | |||
Basis: 1-SF-LI-2607 (Spent Fuel Pool Level) 1-SF-LI-2629 or 1-SF-LIT-2629-1 (Reactor Refuel Cavity Level) AND b. UNPLANNED rise in area radiation levels as indicated by ANY of the following radiation monitors: | |||
RM-6535-A-l, Containment Manipulator Crane RM-6535-B-1, Containment Manipulator Crane RM-6549-1, FSB Spent Fuel Range Low RM-6518-1, FSB Spent Fuel Range Hi UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known oi unknown. | |||
REFUELING PATHWAY: | |||
The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses a decrease in water level above irradiated fuel sufficient to cause elevated radiation levels. This condition could be a precursor to a more serious event and is also indicative of a minor loss in the ability to control radiation levels within the plant. It is therefore a potential degradation in the level of safety of the plant. A water level decrease will be primarily determined by indications from available level instrumentation. | |||
Other sources of level indications may include reports from plant personnel or video camera observations (if available). | |||
A significant drop in the water level may also cause an increase in the radiation levels of adjacent areas that can be detected by monitors in those locations. | |||
The effects of planned evolutions should be considered. | |||
For example, a refueling bridge area radiation monitor reading may increase due to planned evolutions such as lifting of the reactor vessel head or movement of a fuel assembly. | |||
Note that this EAL is applicable only in cases where the elevated reading is due to an UNPLANNED loss of water level. A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. Escalation of the emergency classification level would be via IC RA2. 27 4 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS Recognition Category "C" Initiating Condition Matrix GENERAL SITE AREA ALERT UNUSUAL EVENT EMERGENCY EMERGENCY CGl Loss ofreactor CSl Loss of reactor CAl Loss of reactor CUl UNPLANNED vessel/RCS inventory vessel/RCS inventory vessel/RCS inventory. | |||
loss of reactor affecting fuel clad affecting core decay Op. Modes: 5, 6 vessel/RCS inventory integrity with heat removal for 15 minutes or containment capability. | |||
longer. challenged. | |||
Op. Modes: 5, 6 Op. Modes: 5, 6 Op. Modes: 5, 6 CA2 Loss of all CU2 Loss of all but offsite and all onsite one AC power source AC power to to emergency buses for emergency buses for 15 minutes or longer. 15 minutes or longer. Op. Modes: 5, 6, Op. Modes: 5, 6, De fueled De fueled CA3 Inability to CU3 UNPLANNED maintain the plant in increase in RCS cold shutdown. | |||
temperature. | |||
Op. Modes: 5, 6 Op. Modes: Ji 6 CU4 Loss of Vital DC power for 15 minutes or longer. Op. Modes: 5, 6 CU5 Loss of all onsite or offsite communications capabilities. | |||
Op. Modes: 5, 6, De fueled CA6 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 5, 6 28 CG1 ECL: General Emergency Initiating Condition: | |||
Loss of reactor vessel/RCS inventory affecting fuel clad integrity with containment challenged. | |||
Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the General Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded. | |||
(1) OR (2) a. RVLIS Full Range< 55% (-141.5 in) for 30 minutes or longer. AND b. ANY indication from the Containment Challenge Table C2. a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following: | |||
RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery. | |||
Visual observation. | |||
AND c. ANY indication from the Containment Challenge Table C2. Containment Challenge Table C2 CONTAINMENT INTEGRITY not established | |||
* Containment H2 concentration | |||
:=::: 6% UNPLANNED increase in containment pressure | |||
*If CONTAINMENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. | |||
Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
* 29 CONTAINMENT INTEGRITY: | |||
The procedurally defined conditions or actions taken to secure containment and its associated structures, | |||
: systems, and components as a functional barrier to fission product release under shutdown conditions. | |||
This IC addresses the inability to restore and maintain reactor vessel level above the top of active fuel with containment challenged. | |||
This condition represents actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity. | |||
Releases can be reasonably expected to exceed EPA PAG exposure levels off site for more than the immediate site area. Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable. | |||
With CONTAINJ\1ENT INTEGRITY not established, there is a high potential for a direct and unmonitored release of radioactivity to the environment. | |||
If CONT AINJ\1ENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. | |||
The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity. | |||
It therefore represents a challenge to Containment integrity. | |||
In the early stages of a core uncovery event, it is unlikely that hydrogen buildup due to a core uncovery could result in an explosive gas mixture in containment. | |||
If all installed hydrogen gas monitors are out-of-service during an event leading to fuel cladding damage, it may not be possible to obtain a containment hydrogen gas concentration reading as ambient conditions within the containment will preclude personnel access. During periods when installed containment hydrogen gas monitors are out-of-service, operators may use the other listed indications to assess whether or not containment is challenged. | |||
Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. In EAL 2.b, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties). | |||
It also allows sufficient time for performance of actions to terminate | |||
: leakage, recover inventory control/makeup equipment and/or restore level monitoring. | |||
The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. | |||
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. | |||
30 RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanqe) -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge. | |||
10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management. | |||
==Reference:== | ==Reference:== | ||
FSAR Table 12.3-14 31 CS1 ECL: Site Area Emergency Initiating Condition: Loss ofreactor vessel/RCS inventory affecting core decay heat removal capability. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded. (1) OR (2) OR (3) Basis: a. CONTAINMENT INTEGRITY not established. AND b. RVLIS Full Range< 63% (-101.9 in). a. CONTAINMENT INTEGRITY established. AND b. RVLIS Full Range< 55% (-141.5 in). a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following: RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery Visual observation. CONTAINMENT INTEGRITY: The procedurally defined conditions or actions taken to secure containment and its associated structures, systems, and components as a functional barrier to fission product release under shutdown conditions. UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses a significant and prolonged loss of reactor vessel/RCS inventory control and makeup capability leading to IMMINENT fuel damage. The lost inventory may be due to a RCS component failure, a loss of configuration control or prolonged boiling of reactor coolant. These conditions entail major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration. 32 Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable. Outage/shutdown contingency plans typically provide for re-establishing or verifying CONTAINMENT INTEGRITY following a loss of heat removal or RCS inventory control functions. The difference in the specified RCS/reactor vessel levels ofEALs l.b and 2.b reflect the fact that with CONTAINMENT INTEGRITY established, there is a lower probability of a fission product release to the environment. In EAL 3.a, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties). It also allows sufficient time for performance of actions to terminate leakage, recover inventory control/makeup equipment and/or restore level monitoring. Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanael -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge. 10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management. Escalation of the emergency classification level would be via IC CG 1 or RG 1. 33 CA1 ECL: Alert Initiating Condition: Loss ofreactor vessel/RCS inventory. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) Loss ofreactor vessel/RCS inventory as indicated by RVLIS full range< 64% (-96.9 in.) OR (2) Basis: a. Reactor vessel/RCS level cannot be monitored for 15 minutes or longer. AND b. UNPLANNED increase in Containment Sumps A or B levels due to a loss of reactor vessel/RCS inventory. UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses conditions that are precursors to a loss of the ability to adequately cool irradiated fuel (i.e., a precursor to a challenge to the fuel clad barrier). This condition represents a potential substantial reduction in the level of plant safety. For EAL #1, a lowering of water level below 64% indicates that operator actions have not been successful in restoring and maintaining reactor vessel/RCS water level. The heat-up rate of the coolant will increase as the available water inventory is reduced. A continuing decrease in water level will lead to core uncovery. Although related, EAL #1 is concerned with the loss of RCS inventory and not the potential concurrent effects on systems needed for decay heat removal. An increase in RCS temperature caused by a loss of decay heat removal capability is evaluated under IC CA3. For EAL #2, the inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative ofleakage from the reactor vessel/RCS. 34 RVLIS LEVEL (%) 100 90 80 VESSEL LEVEL (inches from vessel flange) 119.8" 81.3" 31.8" -17.7" 70 -67.2" 64 -96.9" 60 -116.7" 50 -166.2" RC-LI-9405, RC-LIT-9467, and 40 -215.7" the Tygon Tube do not indicate 30 -265.2" reactor vessel level when actual level is less than -95" due to the 20 -314.7" weir on the RCP discharge. 10 -364.2" 0 -413.7" The 15-minute duration for the loss of level indication was chosen because it is half of the EAL duration specified in IC CSl If the reactor vessel/RCS inventory level continues to lower, then escalation to Site Area Emergency would be via IC CS 1. 35 CA2 ECL: Alert Initiating Condition: Loss of all offsite and all onsite AC power to emergency buses for 15 minutes or longer. Operating Mode Applicability: 5, 6, Defueled Emergency Action Levels: Note: | |||
FSAR Table 12.3-14 31 CS1 ECL: Site Area Emergency Initiating Condition: | |||
Loss ofreactor vessel/RCS inventory affecting core decay heat removal capability. | |||
Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded. | |||
(1) OR (2) OR (3) Basis: a. CONTAINMENT INTEGRITY not established. | |||
AND b. RVLIS Full Range< 63% (-101.9 in). a. CONTAINMENT INTEGRITY established. | |||
AND b. RVLIS Full Range< 55% (-141.5 in). a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following: | |||
RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery Visual observation. | |||
CONTAINMENT INTEGRITY: | |||
The procedurally defined conditions or actions taken to secure containment and its associated structures, | |||
: systems, and components as a functional barrier to fission product release under shutdown conditions. | |||
UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses a significant and prolonged loss of reactor vessel/RCS inventory control and makeup capability leading to IMMINENT fuel damage. The lost inventory may be due to a RCS component | |||
: failure, a loss of configuration control or prolonged boiling of reactor coolant. | |||
These conditions entail major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration. | |||
32 Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable. | |||
Outage/shutdown contingency plans typically provide for re-establishing or verifying CONTAINMENT INTEGRITY following a loss of heat removal or RCS inventory control functions. | |||
The difference in the specified RCS/reactor vessel levels ofEALs l.b and 2.b reflect the fact that with CONTAINMENT INTEGRITY established, there is a lower probability of a fission product release to the environment. | |||
In EAL 3.a, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties). | |||
It also allows sufficient time for performance of actions to terminate | |||
: leakage, recover inventory control/makeup equipment and/or restore level monitoring. | |||
Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. | |||
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. | |||
RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanael -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge. | |||
10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management. | |||
Escalation of the emergency classification level would be via IC CG 1 or RG 1. 33 CA1 ECL: Alert Initiating Condition: | |||
Loss ofreactor vessel/RCS inventory. | |||
Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) Loss ofreactor vessel/RCS inventory as indicated by RVLIS full range< 64% (-96.9 in.) OR (2) Basis: a. Reactor vessel/RCS level cannot be monitored for 15 minutes or longer. AND b. UNPLANNED increase in Containment Sumps A or B levels due to a loss of reactor vessel/RCS inventory. | |||
UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses conditions that are precursors to a loss of the ability to adequately cool irradiated fuel (i.e., a precursor to a challenge to the fuel clad barrier). | |||
This condition represents a potential substantial reduction in the level of plant safety. For EAL #1, a lowering of water level below 64% indicates that operator actions have not been successful in restoring and maintaining reactor vessel/RCS water level. The heat-up rate of the coolant will increase as the available water inventory is reduced. | |||
A continuing decrease in water level will lead to core uncovery. | |||
Although | |||
: related, EAL #1 is concerned with the loss of RCS inventory and not the potential concurrent effects on systems needed for decay heat removal. | |||
An increase in RCS temperature caused by a loss of decay heat removal capability is evaluated under IC CA3. For EAL #2, the inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation. | |||
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative ofleakage from the reactor vessel/RCS. | |||
34 RVLIS LEVEL (%) | |||
100 90 80 VESSEL LEVEL (inches from vessel flange) 119.8" 81.3" 31.8" -17.7" 70 -67.2" 64 -96.9" 60 -116.7" 50 -166.2" RC-LI-9405, RC-LIT-9467, and 40 -215.7" the Tygon Tube do not indicate 30 -265.2" reactor vessel level when actual level is less than -95" due to the 20 -314.7" weir on the RCP discharge. | |||
10 -364.2" 0 -413.7" The 15-minute duration for the loss of level indication was chosen because it is half of the EAL duration specified in IC CSl If the reactor vessel/RCS inventory level continues to lower, then escalation to Site Area Emergency would be via IC CS 1. 35 CA2 ECL: Alert Initiating Condition: | |||
Loss of all offsite and all onsite AC power to emergency buses for 15 minutes or longer. Operating Mode Applicability: | |||
5, 6, Defueled Emergency Action Levels: Note: | |||
* The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | ||
* For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. (1) Loss of ALL offsite and ALL onsite AC Power to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. When in the cold shutdown, refueling, or defueled mode, this condition is not classified as a Site Area Emergency because of the increased time available to restore an emergency bus to service. Additional time is available due to the reduced core decay heat load, and the lower temperatures and pressures in various plant systems. Thus, when in these modes, this condition represents an actual or potential substantial degradation of the level of safety of the plant. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively. These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. 36 The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures. | * For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. | ||
(1) Loss of ALL offsite and ALL onsite AC Power to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure | |||
: control, spent fuel heat removal and the ultimate heat sink. When in the cold shutdown, refueling, or defueled mode, this condition is not classified as a Site Area Emergency because of the increased time available to restore an emergency bus to service. | |||
Additional time is available due to the reduced core decay heat load, and the lower temperatures and pressures in various plant systems. | |||
Thus, when in these modes, this condition represents an actual or potential substantial degradation of the level of safety of the plant. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively. | |||
These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | |||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
36 The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures. | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems Escalation of the emergency classification level would be via IC CSl or RSI. 37 CA3 ECL: Alert Initiating Condition: Inability to maintain the plant in cold shutdown. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. (1) UNPLANNED increase in RCS temperature to greater than 200° F for greater than the duration specified in the following table. TableCl -RCS Heat-up Duration Thresholds RCS Status CONTAINMENT INTEGRITY Heat-up Duration Status INTACT and reactor vessel 2: -Not applicable 60 minutes* 36 inches Not INT A CT or reactor vessel < Established 20 minutes* -36 inches Not Established 0 minutes | |||
* IfRHR is in operation within this time frame and RCS temperature is being reduced, the EAL is not applicable. OR (2) UNPLANNED RCS pressure increase greater than 25 psig. (This EAL does not apply during water-solid plant conditions.) Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. INTACT: Capable of being pressurized. This IC addresses conditions involving a loss of decay heat removal capability or an addition of heat to the RCS in excess of that which can currently be removed. Either condition represents an actual or potential substantial degradation of the level of safety of the plant. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification. The RCS Heat-up Duration Thresholds table addresses an increase in RCS temperature when CONTAINMENT INTEGRITY is established but the RCS is not intact, or RCS inventory is reduced. The 20-minute criterion was included to allow time for operator action to address the temperature increase. The RCS Heat-up Duration Thresholds table also addresses an increase in RCS temperature with the RCS intact. The status of CONTAINMENT INTEGRITY is not crucial in this condition since the intact RCS is providing a high pressure barrier to a fission product release. The 60-minute time frame should allow sufficient time to address the temperature increase without a substantial degradation in plant safety. 38 r Finally, in the case where there is an increase in RCS temperature, the RCS is not intact or is at reduced inventory and CONTAINMENT INTEGRITY is not established, no heat-up duration is allowed (i.e., 0 minutes). This is because 1) the evaporated reactor coolant may be released directly into the Containment atmosphere and subsequently to the environment, and 2) there is reduced reactor coolant inventory above the top of irradiated fuel. EAL #2 provides a pressure-based indication of RCS heat-up. The wide-range RCS pressure transmitters have a range of 0 to 3,000 psig. The main control boards have two post-accident monitoring qualified meters, one for each wide-range RCS pressure transmitter. These meters have major divisions at 100 psig intervals and minor divisions at 50 psig intervals. Since it is possible to read the approximate mid-point between minor divisions, the value is set to 25 psig. Escalation of the emergency classification level would be via IC CSl or RSI. 39 CA6 ECL: Alert Initiating Condition: Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake) Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following: 1. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. EXPLOSION: A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion. Such events may require a post-event inspection to determine if the attributes of an explosion are present. VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, testing, or analysis. The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 40 EAL l .b. l addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available. The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components. Operators will make this determination based on the totality of available event and damage report information. This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC CSl or RSI. 41 CU1 ECL: Notification of Unusual Event Initiating Condition: UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level less than a required lower limit of an operating band, specified by an operating procedure for 15 minutes or longer. OR (2) a. Reactor vessel/RCS level cannot be monitored. AND b. UNPLANNED increase in Containment Sump A or B level. Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses the inability to restore and maintain water level to a required minimum level (or the lower limit of a level band), or a loss of the ability to monitor reactor vessel/RCS level concurrent with indications of coolant leakage. Either of these conditions is considered to be a potential degradation of the level of safety of the plant. Refueling evolutions that decrease RCS water inventory are carefully planned and controlled. An UNPLANNED event that results in water level decreasing below a procedurally required limit warrants the declaration of an Unusual Event due to the reduced water inventory that is available to keep the core covered. EAL #1 recognizes that the minimum required reactor vessel/RCS level can change several times during the course of a refueling outage as different plant configurations and system lineups are implemented. This EAL is met ifthe minimum level, specified for the current plant conditions, cannot be maintained for 15 minutes or longer. The minimum level is typically specified in the applicable operating procedure but may be specified in another controlling document. The 15-minute threshold duration allows sufficient time for prompt operator actions to restore and maintain the expected water level. This criterion excludes transient conditions causing a brief lowering of water level. EAL #2 addresses a condition where all means to determine reactor vessel/RCS level have been lost. In this condition, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against 42 other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. Continued loss of RCS inventory may result in escalation to the Alert emergency classification level via either IC CAI or CA3. 43 CU2 ECL: Notification of Unusual Event Initiating Condition: Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability: 5, 6, Defueled Emergency Action Levels: Notes: (1) | UFSAR Section 8.3.1, AC Power Systems Escalation of the emergency classification level would be via IC CSl or RSI. 37 CA3 ECL: Alert Initiating Condition: | ||
Inability to maintain the plant in cold shutdown. | |||
Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | |||
(1) UNPLANNED increase in RCS temperature to greater than 200° F for greater than the duration specified in the following table. TableCl -RCS Heat-up Duration Thresholds RCS Status CONTAINMENT INTEGRITY Heat-up Duration Status INTACT and reactor vessel 2: -Not applicable 60 minutes* | |||
36 inches Not INT A CT or reactor vessel < Established 20 minutes* | |||
-36 inches Not Established 0 minutes | |||
* IfRHR is in operation within this time frame and RCS temperature is being reduced, the EAL is not applicable. | |||
OR (2) UNPLANNED RCS pressure increase greater than 25 psig. (This EAL does not apply during water-solid plant conditions.) | |||
Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
INTACT: Capable of being pressurized. | |||
This IC addresses conditions involving a loss of decay heat removal capability or an addition of heat to the RCS in excess of that which can currently be removed. | |||
Either condition represents an actual or potential substantial degradation of the level of safety of the plant. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification. | |||
The RCS Heat-up Duration Thresholds table addresses an increase in RCS temperature when CONTAINMENT INTEGRITY is established but the RCS is not intact, or RCS inventory is reduced. | |||
The 20-minute criterion was included to allow time for operator action to address the temperature increase. | |||
The RCS Heat-up Duration Thresholds table also addresses an increase in RCS temperature with the RCS intact. The status of CONTAINMENT INTEGRITY is not crucial in this condition since the intact RCS is providing a high pressure barrier to a fission product release. | |||
The 60-minute time frame should allow sufficient time to address the temperature increase without a substantial degradation in plant safety. 38 r Finally, in the case where there is an increase in RCS temperature, the RCS is not intact or is at reduced inventory and CONTAINMENT INTEGRITY is not established, no heat-up duration is allowed (i.e., 0 minutes). | |||
This is because 1) the evaporated reactor coolant may be released directly into the Containment atmosphere and subsequently to the environment, and 2) there is reduced reactor coolant inventory above the top of irradiated fuel. EAL #2 provides a pressure-based indication of RCS heat-up. | |||
The wide-range RCS pressure transmitters have a range of 0 to 3,000 psig. The main control boards have two post-accident monitoring qualified meters, one for each wide-range RCS pressure transmitter. | |||
These meters have major divisions at 100 psig intervals and minor divisions at 50 psig intervals. | |||
Since it is possible to read the approximate mid-point between minor divisions, the value is set to 25 psig. Escalation of the emergency classification level would be via IC CSl or RSI. 39 CA6 ECL: Alert Initiating Condition: | |||
Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake) | |||
Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following: | |||
: 1. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. | |||
EXPLOSION: | |||
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. | |||
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion. | |||
Such events may require a post-event inspection to determine if the attributes of an explosion are present. | |||
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, | |||
: testing, or analysis. | |||
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. | |||
SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. | |||
This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 40 EAL l .b. l addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available. | |||
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components. | |||
Operators will make this determination based on the totality of available event and damage report information. | |||
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC CSl or RSI. 41 CU1 ECL: Notification of Unusual Event Initiating Condition: | |||
UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level less than a required lower limit of an operating band, specified by an operating procedure for 15 minutes or longer. OR (2) a. Reactor vessel/RCS level cannot be monitored. | |||
AND b. UNPLANNED increase in Containment Sump A or B level. Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses the inability to restore and maintain water level to a required minimum level (or the lower limit of a level band), or a loss of the ability to monitor reactor vessel/RCS level concurrent with indications of coolant leakage. | |||
Either of these conditions is considered to be a potential degradation of the level of safety of the plant. Refueling evolutions that decrease RCS water inventory are carefully planned and controlled. | |||
An UNPLANNED event that results in water level decreasing below a procedurally required limit warrants the declaration of an Unusual Event due to the reduced water inventory that is available to keep the core covered. | |||
EAL #1 recognizes that the minimum required reactor vessel/RCS level can change several times during the course of a refueling outage as different plant configurations and system lineups are implemented. | |||
This EAL is met ifthe minimum level, specified for the current plant conditions, cannot be maintained for 15 minutes or longer. The minimum level is typically specified in the applicable operating procedure but may be specified in another controlling document. | |||
The 15-minute threshold duration allows sufficient time for prompt operator actions to restore and maintain the expected water level. This criterion excludes transient conditions causing a brief lowering of water level. EAL #2 addresses a condition where all means to determine reactor vessel/RCS level have been lost. In this condition, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against 42 other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS. | |||
Continued loss of RCS inventory may result in escalation to the Alert emergency classification level via either IC CAI or CA3. 43 CU2 ECL: Notification of Unusual Event Initiating Condition: | |||
Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability: | |||
5, 6, Defueled Emergency Action Levels: Notes: (1) | |||
* The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | ||
* For power restoration from the SEPS, both SEPS diesel generator sets must be functional. a. AND AC power capability to Both AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. NOTE There are six power sources to consider: | * For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | ||
: a. AND AC power capability to Both AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. | |||
NOTE There are six power sources to consider: | |||
* 345 kV offsite power line 369 | * 345 kV offsite power line 369 | ||
* 345 kV offsite power line 363 | * 345 kV offsite power line 363 | ||
Line 93: | Line 568: | ||
* Emergency Diesel Generator A | * Emergency Diesel Generator A | ||
* Emergency Diesel Generator B | * Emergency Diesel Generator B | ||
* SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional Basis: SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. In this condition, the sole AC power source may be powering one, or more than one, train of related equipment. When in the cold shutdown, refueling, or defueled mode, this condition is not classified as an Alert because of the increased time available to restore another power source to service. Additional time is available due to the reduced core decay heat load, and the lower temperatures 44 and pressures in various plant systems. Thus, when in these modes, this condition is considered to be a potential degradation of the level of safety of the plant. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively. These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures. The subsequent loss of the remaining single power source would escalate the event to an Alert in accordance with IC CA2. | * SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional Basis: SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. | ||
This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. | |||
In this condition, the sole AC power source may be powering one, or more than one, train of related equipment. | |||
When in the cold shutdown, refueling, or defueled mode, this condition is not classified as an Alert because of the increased time available to restore another power source to service. | |||
Additional time is available due to the reduced core decay heat load, and the lower temperatures 44 and pressures in various plant systems. | |||
Thus, when in these modes, this condition is considered to be a potential degradation of the level of safety of the plant. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively. | |||
These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | |||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures. | |||
The subsequent loss of the remaining single power source would escalate the event to an Alert in accordance with IC CA2. | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems 45 CU3 ECL: Notification of Unusual Event Initiating Condition: UNPLANNED increase in RCS temperature. Operating Mode Applicability: 5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) UNPLANNED increase in RCS temperature to greater than 200°F. OR (2) Loss of ALL RCS temperature and reactor vessel/RCS level indication for 15 minutes or longer. Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses an UNPLANNED increase in RCS temperature above the Technical Specification cold shutdown temperature limit, or the inability to determine RCS temperature and level, represents a potential degradation of the level of safety of the plant. If the RCS is not intact and CONTAINMENT INTEGRITY is not established during this event, the STED/SED should also refer to IC CA3. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification. EAL #1 involves a loss of decay heat removal capability, or an addition of heat to the RCS in excess of that which can currently be removed, such that reactor coolant temperature cannot be maintained below the cold shutdown temperature limit specified in Technical Specifications. During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation. During an outage, the level in the reactor vessel will normally be maintained above the reactor vessel flange. Refueling evolutions that lower water level below the reactor vessel flange are carefully planned and controlled. A loss of forced decay heat removal at reduced inventory may result in a rapid increase in reactor coolant temperature depending on the time after shutdown. EAL #2 reflects a condition where there has been a significant loss of instrumentation capability necessary to monitor RCS conditions and operators would be unable to monitor key parameters necessary to assure core decay heat removal. During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. Escalation to Alert would be via IC CAI based on an inventory loss or IC CA3 based on exceeding plant configuration-specific time criteria. 46 CU4 ECL: Notification of Unusual Event Initiating Condition: Loss of Vital DC power for 15 minutes or longer. Operating Mode Applicability: 5, 6 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) Indicated voltage is less than 105V on required Vital DC buses associated with the Protected Train for 15 minutes or longer. Train A 1 lA and 1 lC Train B 1 lB and 1 lD Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control operable SAFETY SYSTEMS when the plant is in the cold shutdown or refueling mode. In these modes, the core decay heat load has been significantly reduced, and coolant system temperatures and pressures are lower; these conditions increase the time available to restore a vital DC bus to service. Thus, this condition is considered to be a potential degradation of the level of safety of the plant. As used in this EAL, "required" means the Vital DC buses necessary to support operation of the in-service, or operable, train or trains of SAFETY SYSTEM equipment. For example, if Train A is out-of-service (inoperable) for scheduled outage maintenance work and Train Bis in-service (operable), then a loss of Vital DC power affecting Train B would require the declaration of an Unusual Event. A loss of Vital DC power to Train A would not warrant an emergency classification. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Per DBD-ED-05, the DC bus voltage range within which the 125 Volt DC system is considered operable is 105 volts minimum to 140 volts maximum. The vital DC Buses (Switchgear) are SWG-1 lA and 1 lC for Train A and SWG-1 lB and 1 lD for Train B. | |||
UFSAR Section 8.3.1, AC Power Systems 45 CU3 ECL: Notification of Unusual Event Initiating Condition: | |||
UNPLANNED increase in RCS temperature. | |||
Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) UNPLANNED increase in RCS temperature to greater than 200°F. OR (2) Loss of ALL RCS temperature and reactor vessel/RCS level indication for 15 minutes or longer. Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses an UNPLANNED increase in RCS temperature above the Technical Specification cold shutdown temperature limit, or the inability to determine RCS temperature and level, represents a potential degradation of the level of safety of the plant. If the RCS is not intact and CONTAINMENT INTEGRITY is not established during this event, the STED/SED should also refer to IC CA3. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification. | |||
EAL #1 involves a loss of decay heat removal capability, or an addition of heat to the RCS in excess of that which can currently be removed, such that reactor coolant temperature cannot be maintained below the cold shutdown temperature limit specified in Technical Specifications. | |||
During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation. | |||
During an outage, the level in the reactor vessel will normally be maintained above the reactor vessel flange. Refueling evolutions that lower water level below the reactor vessel flange are carefully planned and controlled. | |||
A loss of forced decay heat removal at reduced inventory may result in a rapid increase in reactor coolant temperature depending on the time after shutdown. | |||
EAL #2 reflects a condition where there has been a significant loss of instrumentation capability necessary to monitor RCS conditions and operators would be unable to monitor key parameters necessary to assure core decay heat removal. | |||
During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation. | |||
Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. | |||
Escalation to Alert would be via IC CAI based on an inventory loss or IC CA3 based on exceeding plant configuration-specific time criteria. | |||
46 CU4 ECL: Notification of Unusual Event Initiating Condition: | |||
Loss of Vital DC power for 15 minutes or longer. Operating Mode Applicability: | |||
5, 6 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) Indicated voltage is less than 105V on required Vital DC buses associated with the Protected Train for 15 minutes or longer. Train A 1 lA and 1 lC Train B 1 lB and 1 lD Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control operable SAFETY SYSTEMS when the plant is in the cold shutdown or refueling mode. In these modes, the core decay heat load has been significantly | |||
: reduced, and coolant system temperatures and pressures are lower; these conditions increase the time available to restore a vital DC bus to service. | |||
Thus, this condition is considered to be a potential degradation of the level of safety of the plant. As used in this EAL, "required" means the Vital DC buses necessary to support operation of the in-service, or operable, train or trains of SAFETY SYSTEM equipment. | |||
For example, if Train A is out-of-service (inoperable) for scheduled outage maintenance work and Train Bis in-service (operable), | |||
then a loss of Vital DC power affecting Train B would require the declaration of an Unusual Event. A loss of Vital DC power to Train A would not warrant an emergency classification. | |||
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Per DBD-ED-05, the DC bus voltage range within which the 125 Volt DC system is considered operable is 105 volts minimum to 140 volts maximum. | |||
The vital DC Buses (Switchgear) are SWG-1 lA and 1 lC for Train A and SWG-1 lB and 1 lD for Train B. | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.2, DC Power System Procedure OS1248.0l, Loss ofa Vital 125 VDC Bus Procedure VPRO F5278, Loss of All Vital DC Power DBD-ED-05, 125 VDC System Depending upon the event, escalation of the emergency classification level would be via IC CAI or CA3, or an IC in Recognition Category R. 47 ECL: Notification of Unusual Event Initiating Condition: Loss of all onsite or offsite communications capabilities. Operating Mode Applicability: 5, 6, Defueled Emergency Action Levels: (1 or 2 or 3) (1) Loss of ALL of the following onsite communication methods: In-Plant (PBX) Telephones Gai-Tronics Plant Radio System OR (2) Loss of ALL of the following ORO communications methods: Nuclear Alert System (NAS) Backup NAS Control Room/TSC telephones OR (3) Loss of ALL of the following NRC communications methods: Basis: Emergency Notification System (ENS) Control Room/TSC telephones FTS telephones in the TSC cus This IC addresses a significant loss of on-site or offsite communications capabilities. While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and theNRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible. EAL #1 addresses a total loss of the communications methods used in support of routine plant operations. EAL #2 addresses a total loss of the communications methods used to notify all OR Os of an emergency declaration. The OROs referred to here are Commonwealth of Massachusetts and State of New Hampshire. EAL #3 addresses a total loss of the communications methods used to notify the NRC of an emergency declaration. 48 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) ICS/EALS Recognition Category "E" Initiating Condition Matrix UNUSUAL EVENT EUl Damage to a loaded cask CONFINEMENT BOUNDARY. Op. Modes: All 49 EU1 ECL: Notification of Unusual Event Initiating Condition: Damage to a loaded cask CONFINEMENT BOUNDARY. Operating Mode Applicability: All Emergency Action Levels: Note: The on-contact dose rate may be determined based on measurement of a dose rate at some distance from the cask (1) Damage to a loaded cask CONFINEMENT BOUNDARY as indicated by ANY of the following on-contact surface radiation readings greater than: 1600 mrem/hr at the front bird screen 4 mrem/hr at the door centerline 4 mrem/hr at the end shield wall exterior Basis: CONFINEMENT BOUNDARY: The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage. This IC addresses an event that results in damage to the CONFINEMENT BOUNDARY of a storage cask containing spent fuel. It applies to irradiated fuel that is licensed for dry storage beginning at the point that the loaded storage cask is sealed in the Horizontal Storage Module. The issues of concern are the creation of a potential or actual release path to the environment, degradation of one or more fuel assemblies due to environmental factors, and configuration changes which could cause challenges in removing the cask or fuel from storage. The existence of "damage" is determined by radiological survey. The technical specification multiple of "2 times", which is also used in Recognition Category RIC RUl, is used here to distinguish between non-emergency and emergency conditions. The emphasis for this classification is the degradation in the level of safety of the spent fuel cask and not the magnitude of the associated dose or dose rate. It is recognized that in the case of extreme damage to a loaded cask, the fact that the "on-contact" dose rate limit is exceeded may be determined based on measurement of a dose rate at some distance from the cask. Security-related events for ISFSis are covered under ICs HUI and HAI. | |||
UFSAR Section 8.3.2, DC Power System Procedure OS1248.0l, Loss ofa Vital 125 VDC Bus Procedure VPRO F5278, Loss of All Vital DC Power DBD-ED-05, 125 VDC System Depending upon the event, escalation of the emergency classification level would be via IC CAI or CA3, or an IC in Recognition Category R. 47 ECL: Notification of Unusual Event Initiating Condition: | |||
Loss of all onsite or offsite communications capabilities. | |||
Operating Mode Applicability: | |||
5, 6, Defueled Emergency Action Levels: (1 or 2 or 3) (1) Loss of ALL of the following onsite communication methods: | |||
In-Plant (PBX) Telephones Gai-Tronics Plant Radio System OR (2) Loss of ALL of the following ORO communications methods: | |||
Nuclear Alert System (NAS) Backup NAS Control Room/TSC telephones OR (3) Loss of ALL of the following NRC communications methods: | |||
Basis: Emergency Notification System (ENS) Control Room/TSC telephones FTS telephones in the TSC cus This IC addresses a significant loss of on-site or offsite communications capabilities. | |||
While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and theNRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible. | |||
EAL #1 addresses a total loss of the communications methods used in support of routine plant operations. | |||
EAL #2 addresses a total loss of the communications methods used to notify all OR Os of an emergency declaration. | |||
The OROs referred to here are Commonwealth of Massachusetts and State of New Hampshire. | |||
EAL #3 addresses a total loss of the communications methods used to notify the NRC of an emergency declaration. | |||
48 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) ICS/EALS Recognition Category "E" Initiating Condition Matrix UNUSUAL EVENT EUl Damage to a loaded cask CONFINEMENT BOUNDARY. | |||
Op. Modes: All 49 EU1 ECL: Notification of Unusual Event Initiating Condition: | |||
Damage to a loaded cask CONFINEMENT BOUNDARY. | |||
Operating Mode Applicability: | |||
All Emergency Action Levels: Note: The on-contact dose rate may be determined based on measurement of a dose rate at some distance from the cask (1) Damage to a loaded cask CONFINEMENT BOUNDARY as indicated by ANY of the following on-contact surface radiation readings greater than: 1600 mrem/hr at the front bird screen 4 mrem/hr at the door centerline 4 mrem/hr at the end shield wall exterior Basis: CONFINEMENT BOUNDARY: | |||
The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage. | |||
This IC addresses an event that results in damage to the CONFINEMENT BOUNDARY of a storage cask containing spent fuel. It applies to irradiated fuel that is licensed for dry storage beginning at the point that the loaded storage cask is sealed in the Horizontal Storage Module. The issues of concern are the creation of a potential or actual release path to the environment, degradation of one or more fuel assemblies due to environmental | |||
: factors, and configuration changes which could cause challenges in removing the cask or fuel from storage. | |||
The existence of "damage" is determined by radiological survey. The technical specification multiple of "2 times", which is also used in Recognition Category RIC RUl, is used here to distinguish between non-emergency and emergency conditions. | |||
The emphasis for this classification is the degradation in the level of safety of the spent fuel cask and not the magnitude of the associated dose or dose rate. It is recognized that in the case of extreme damage to a loaded cask, the fact that the "on-contact" dose rate limit is exceeded may be determined based on measurement of a dose rate at some distance from the cask. Security-related events for ISFSis are covered under ICs HUI and HAI. | |||
==Reference:== | ==Reference:== | ||
Appendix A to Certificate Of Compliance No. 1030 NUHOMS HD System Generic Technical Specifications 5.4.3. 50 6 FISSION PRODUCT BARRIER ICS/EALS Recognition Category "F" Initiating Condition Matrix GENERAL EMERGENCY Loss of any two barriers and Loss or FGl Potential Loss of the third barrier. | |||
Op. Modes: 1, 3, 2, 4 SITE AREA EMERGENCY Loss or Potential Loss of any two barriers. | |||
FSl Ov. Modes: 1, 3, 2, 4 ALERT Any Loss or any Potential Loss of either the FAl Fuel Clad or RCS barrier. | |||
Ov. Modes: 1, 3, 2, 4 51 Fission Product Barrier Table Thresholds for LOSS or POTENTIAL LOSS of Barriers FGlGENERALEMERGENCY FSl SITE AREA EMERGENCY FAlALERT Loss of any two barriers and Loss or Loss or Potential Loss of any two barriers. | |||
Any Loss or any Potential Loss of either Potential Loss of the third barrier. | |||
the Fuel Clad or RCS barrier. | |||
Fuel Clad Barrier RCS Barrier Containment | |||
* The gas release is a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area. | * The gas release is a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area. | ||
* The action for which room/area entry is required is of an administrative or record keeping nature. | * The action for which room/area entry is required is of an administrative or record keeping nature. | ||
* The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. An asphyxiant is a gas capable of reducing the level of oxygen in the body to dangerous levels. Most commonly, asphyxiants work by merely displacing air in an enclosed environment. This reduces the concentration of oxygen below the normal level of around 19%, which can lead to breathing difficulties, unconsciousness or even death. This EAL does not apply to firefighting activities that automatically or manually activate a fire suppression system in an area. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. | * The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. An asphyxiant is a gas capable of reducing the level of oxygen in the body to dangerous levels. Most commonly, asphyxiants work by merely displacing air in an enclosed environment. | ||
This reduces the concentration of oxygen below the normal level of around 19%, which can lead to breathing difficulties, unconsciousness or even death. This EAL does not apply to firefighting activities that automatically or manually activate a fire suppression system in an area. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. | |||
==References:== | ==References:== | ||
OSl000.03, Plant Shutdown From Minimum Load to Hot Standby OSl000.04, Plant Cooldown From Hot Standby to Cold Shutdown 74 HA6 ECL: Alert Initiating Condition: Control Room evacuation resulting in transfer of plant control to alternate locations. Operating Mode Applicability: All Emergency Action Levels: (1) Entry into Procedure OS1200.02 for control room evacuation resulted in plant control being transferred from the Control Room to Remote Safe Shutdown components. Basis: This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations outside the Control Room. The loss of the ability to control the plant from the Control Room is considered to be a potential substantial degradation in the level of plant safety. Following a Control Room evacuation, control of the plant will be transferred to alternate shutdown locations. The necessity to control a plant shutdown from outside the Control Room, in addition to responding to the event that required the evacuation of the Control Room, will present challenges to plant operators and other on-shift personnel. Activation of the ERO and emergency response facilities will assist in responding to these challenges. Escalation of the emergency classification level would be via IC HS6. 75 HA7 ECL: Alert Initiating Condition: Other conditions exist which in the judgment of the STED/SED warrant declaration of an Alert. Operating Mode Applicability: All Emergency Action Levels: (1) Other conditions exist which, in the judgment of the STED/SED, indicate that events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA Protective Action Guideline exposure levels. Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for an Alert. 76 HU1 ECL: Notification of Unusual Event Initiating Condition: Confirmed SECURITY CONDITION or threat. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3) (1) A Code Yellow is reported by the Security Shift Supervisor. OR (2) Notification of a credible security threat directed at Seabrook Station. OR (3) A validated notification from the NRC providing information of an aircraft threat. Basis: Code Yellow -SECURITY CONDITION: Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses events that pose a threat to plant personnel or SAFETY SYSTEM equipment, and thus represent a potential degradation in the level of plant safety. Security events which do not meet one of these EALs are adequately addressed by the requirements of IO CFR § 73.7I or IO CFR § 50.72. Security events assessed as HOSTILE ACTIONS are classifiable under ICs HAI, HSI and HGI. Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Classification of these events will initiate appropriate threat-related notifications to plant personnel and OROs. Security plans and terminology are based on the guidance provided by NEI 03-I 2, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program]. EAL # 1 references Security Shift Supervisor because these are the individuals trained to confirm that a security event is occurring or has occurred. Training on security event confirmation and classification is controlled due to the nature of Safeguards and I 0 CFR § 2.390 information. EAL #2 addresses the receipt of a credible security threat. The credibility of the threat is assessed in accordance with site procedures. EAL #3 addresses the threat from the impact of an aircraft on the plant. The NRC Headquarters Operations Officer (HOO) will communicate to the licensee ifthe threat involves an aircraft. The status and size of the plane may also be provided by NORAD through the NRC. Validation 77 of the threat is performed in accordance with site procedures. Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information. This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location. Security-sensitive information should be contained in non-public documents such as the Security Plan. Escalation of the emergency classification level would be via IC HAL | |||
OSl000.03, Plant Shutdown From Minimum Load to Hot Standby OSl000.04, Plant Cooldown From Hot Standby to Cold Shutdown 74 HA6 ECL: Alert Initiating Condition: | |||
Control Room evacuation resulting in transfer of plant control to alternate locations. | |||
Operating Mode Applicability: | |||
All Emergency Action Levels: (1) Entry into Procedure OS1200.02 for control room evacuation resulted in plant control being transferred from the Control Room to Remote Safe Shutdown components. | |||
Basis: This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations outside the Control Room. The loss of the ability to control the plant from the Control Room is considered to be a potential substantial degradation in the level of plant safety. Following a Control Room evacuation, control of the plant will be transferred to alternate shutdown locations. | |||
The necessity to control a plant shutdown from outside the Control Room, in addition to responding to the event that required the evacuation of the Control Room, will present challenges to plant operators and other on-shift personnel. | |||
Activation of the ERO and emergency response facilities will assist in responding to these challenges. | |||
Escalation of the emergency classification level would be via IC HS6. 75 HA7 ECL: Alert Initiating Condition: | |||
Other conditions exist which in the judgment of the STED/SED warrant declaration of an Alert. Operating Mode Applicability: | |||
All Emergency Action Levels: (1) Other conditions exist which, in the judgment of the STED/SED, indicate that events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA Protective Action Guideline exposure levels. Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, | |||
: vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. | |||
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for an Alert. 76 HU1 ECL: Notification of Unusual Event Initiating Condition: | |||
Confirmed SECURITY CONDITION or threat. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3) (1) A Code Yellow is reported by the Security Shift Supervisor. | |||
OR (2) Notification of a credible security threat directed at Seabrook Station. | |||
OR (3) A validated notification from the NRC providing information of an aircraft threat. Basis: Code Yellow -SECURITY CONDITION: | |||
Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, | |||
: vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. | |||
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses events that pose a threat to plant personnel or SAFETY SYSTEM equipment, and thus represent a potential degradation in the level of plant safety. Security events which do not meet one of these EALs are adequately addressed by the requirements of IO CFR § 73.7I or IO CFR § 50.72. Security events assessed as HOSTILE ACTIONS are classifiable under ICs HAI, HSI and HGI. Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Classification of these events will initiate appropriate threat-related notifications to plant personnel and OROs. Security plans and terminology are based on the guidance provided by NEI 03-I 2, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program]. | |||
EAL # 1 references Security Shift Supervisor because these are the individuals trained to confirm that a security event is occurring or has occurred. | |||
Training on security event confirmation and classification is controlled due to the nature of Safeguards and I 0 CFR § 2.390 information. | |||
EAL #2 addresses the receipt of a credible security threat. The credibility of the threat is assessed in accordance with site procedures. | |||
EAL #3 addresses the threat from the impact of an aircraft on the plant. The NRC Headquarters Operations Officer (HOO) will communicate to the licensee ifthe threat involves an aircraft. | |||
The status and size of the plane may also be provided by NORAD through the NRC. Validation 77 of the threat is performed in accordance with site procedures. | |||
Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information. | |||
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location. | |||
Security-sensitive information should be contained in non-public documents such as the Security Plan. Escalation of the emergency classification level would be via IC HAL | |||
==References:== | ==References:== | ||
OS1290.03, Response to a Security Event. OS1290.04, Response to an Airborne Security Event 78 I . ' ' HU2 ECL: Notification of Unusual Event Initiating Condition: Seismic event greater than OBE levels. Operating Mode Applicability: All Emergency Action Levels: (1) Seismic event greater than Operating Basis Earthquake (OBE) as indicated by: a. The red "EVENT" light is lit on seismic monitoring control panel 1-SM-CP-58. OR (2) Basis: AND b. The yellow "OBE" light is lit on seismic monitoring control panel l-SM-CP-58. a. Seismic monitoring system out of service AND b. Control Room personnel feel an actual or potential seismic event AND c. The occurrence of a seismic event is confirmed in a manner deemed appropriate by the Shift Manager This IC addresses a seismic event that results in accelerations at the plant site greater than those specified for an Operating Basis Earthquake (OBE). An earthquake greater than an OBE but less than a Safe Shutdown Earthquake (SSE) should have no significant impact on safety-related systems, structures and components; however, some time may be required for the plant staff to ascertain the actual post-event condition of the plant. Given the time necessary to perform downs and inspections, and fully understand any impacts, this event represents a potential degradation of the level of safety of the plant. Event verification with external sources should not be necessary during or following an OBE. Earthquakes of this magnitude should be readily felt by on-site personnel and recognized as a seismic event. The Shift Manager or STED/SED may seek external verification if deemed appropriate; however, the verification action must not preclude a timely emergency declaration. | |||
OS1290.03, Response to a Security Event. OS1290.04, Response to an Airborne Security Event 78 I . ' ' HU2 ECL: Notification of Unusual Event Initiating Condition: | |||
Seismic event greater than OBE levels. Operating Mode Applicability: | |||
All Emergency Action Levels: (1) Seismic event greater than Operating Basis Earthquake (OBE) as indicated by: a. The red "EVENT" light is lit on seismic monitoring control panel 1-SM-CP-58. | |||
OR (2) Basis: AND b. The yellow "OBE" light is lit on seismic monitoring control panel l-SM-CP-58. | |||
: a. Seismic monitoring system out of service AND b. Control Room personnel feel an actual or potential seismic event AND c. The occurrence of a seismic event is confirmed in a manner deemed appropriate by the Shift Manager This IC addresses a seismic event that results in accelerations at the plant site greater than those specified for an Operating Basis Earthquake (OBE). An earthquake greater than an OBE but less than a Safe Shutdown Earthquake (SSE) should have no significant impact on safety-related | |||
: systems, structures and components; | |||
: however, some time may be required for the plant staff to ascertain the actual post-event condition of the plant. Given the time necessary to perform downs and inspections, and fully understand any impacts, this event represents a potential degradation of the level of safety of the plant. Event verification with external sources should not be necessary during or following an OBE. Earthquakes of this magnitude should be readily felt by on-site personnel and recognized as a seismic event. The Shift Manager or STED/SED may seek external verification if deemed appropriate; | |||
: however, the verification action must not preclude a timely emergency declaration. | |||
==Reference:== | ==Reference:== | ||
EC 282184, Seismic Monitoring System Upgrade Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 79 HU3 ECL: Notification of Unusual Event Initiating Condition: Hazardous event. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3 or 4) Note: EAL #4 does not apply to routine traffic impediments such as fog, snow, ice, or vehicle breakdowns or accidents. (1) A tornado strike within the PROTECTED AREA. OR (2) Internal room or area flooding of a magnitude sufficient to require manual or automatic electrical isolation of a SAFETY SYSTEM component needed for the current operating mode. OR (3) Movement of personnel within the PROTECTED AREA is IMPEDED due to an offsite event involving hazardous materials. OR (4) A hazardous event that results in on-site conditions sufficient to prohibit the plant staff from accessing the site via personal vehicles. Basis: PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. EAL #1 addresses a tornado striking (touching down) within the Protected Area. EAL #2 addresses flooding of a building room or area that results in operators isolating power to a SAFETY SYSTEM component due to water level or other wetting concerns. Classification is also required if the water level or related wetting causes an automatic isolation of a SAFETY SYSTEM component from its power source. To warrant classification, operability of the affected component must be required by Technical Specifications for the current operating mode. EAL #3 addresses a hazardous materials event originating at an off site location and of sufficient magnitude to impede the movement of personnel within the PROTECTED AREA. 80 EAL #4 addresses a hazardous event that causes an on-site impediment to vehicle movement and significant enough to prohibit the plant staff from accessing the site using personal vehicles. Examples of such an event include site flooding caused by a hurricane, heavy rains, up-river water releases, dam failure, etc., or an on-site train derailment blocking the access road. This EAL is not intended apply to routine impediments such as fog, snow, ice, or vehicle breakdowns or accidents, but rather to more significant conditions such as the Hurricane Andrew strike on Turkey Point in 1992, the flooding around the Cooper Station during the Midwest floods of 1993, or the flooding around Ft. Calhoun Station in 2011. Escalation of the emergency classification level would be based on ICs in Recognition Categories A, F, Mor C. 81 ECL: Notification of Unusual Event Initiating Condition: FIRE potentially degrading the level of safety of the plant. Operating Mode Applicability: All Emergency Action Levels: (1 or 2 or 3 or 4) Notes: HU4 | |||
EC 282184, Seismic Monitoring System Upgrade Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 79 HU3 ECL: Notification of Unusual Event Initiating Condition: | |||
Hazardous event. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3 or 4) Note: EAL #4 does not apply to routine traffic impediments such as fog, snow, ice, or vehicle breakdowns or accidents. | |||
(1) A tornado strike within the PROTECTED AREA. OR (2) Internal room or area flooding of a magnitude sufficient to require manual or automatic electrical isolation of a SAFETY SYSTEM component needed for the current operating mode. OR (3) Movement of personnel within the PROTECTED AREA is IMPEDED due to an offsite event involving hazardous materials. | |||
OR (4) A hazardous event that results in on-site conditions sufficient to prohibit the plant staff from accessing the site via personal vehicles. | |||
Basis: PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. | |||
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. EAL #1 addresses a tornado striking (touching down) within the Protected Area. EAL #2 addresses flooding of a building room or area that results in operators isolating power to a SAFETY SYSTEM component due to water level or other wetting concerns. | |||
Classification is also required if the water level or related wetting causes an automatic isolation of a SAFETY SYSTEM component from its power source. To warrant classification, operability of the affected component must be required by Technical Specifications for the current operating mode. EAL #3 addresses a hazardous materials event originating at an off site location and of sufficient magnitude to impede the movement of personnel within the PROTECTED AREA. 80 EAL #4 addresses a hazardous event that causes an on-site impediment to vehicle movement and significant enough to prohibit the plant staff from accessing the site using personal vehicles. | |||
Examples of such an event include site flooding caused by a hurricane, heavy rains, up-river water releases, dam failure, etc., or an on-site train derailment blocking the access road. This EAL is not intended apply to routine impediments such as fog, snow, ice, or vehicle breakdowns or accidents, but rather to more significant conditions such as the Hurricane Andrew strike on Turkey Point in 1992, the flooding around the Cooper Station during the Midwest floods of 1993, or the flooding around Ft. Calhoun Station in 2011. Escalation of the emergency classification level would be based on ICs in Recognition Categories A, F, Mor C. 81 ECL: Notification of Unusual Event Initiating Condition: | |||
FIRE potentially degrading the level of safety of the plant. Operating Mode Applicability: | |||
All Emergency Action Levels: (1 or 2 or 3 or 4) Notes: HU4 | |||
* The STED/SED should declare the Unusual Event promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Unusual Event promptly upon determining that the applicable time has been exceeded, or will likely be exceeded. | ||
* A containment fire alarm is considered valid upon receipt of multiple zones (more than 1) actuated on CP-376 panel. (1) OR a. AND A FIRE is NOT extinguished within 15-minutes of ANY of the following FIRE detection indications: Report from the field (i.e., visual observation) Receipt of multiple (more than 1) fire alarms or indications Field verification of a single fire alarm b. The FIRE is located within ANY Table H2 plant rooms or areas: Table H2 Condensate Storage Tank Enclosure Fuel Storage Building Containment Primary Auxiliary Building Control Building Service Water Pump House Cooling Tower Steam and Feedwater Pipe Chases Diesel Generator Building North Tank Farm Emergency Feedwater Pump House Startup Feedwater Pump Area RHR/CBS Equipment Vaults (2) a. Receipt of a single fire alarm (i.e., no other indications of a FIRE). OR AND b. The FIRE is located within ANY of the Table H2 plant rooms or areas except Containment in Modes 1 and 2 (see note above): AND c. The existence of a FIRE is not verified within 30-minutes of alarm receipt. (3) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility not extinguished within 60-minutes of the initial report, alarm or indication. OR (4) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility that requires firefighting support by an offsite fire response agency to extinguish. 82 Basis: FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. With regard to containment fire alarms, there is constant air movement in containment due to the operation of the CAH system. The operating cooling units are drawing air to the units past the smoke detectors. It can reasonably be expected that a fire that burns for 15 minutes would produce sufficient products of combustion to cause fire detectors in multiple zones to alarm. EAL#l The intent of the 15-minute duration is to size the FIRE and to discriminate against small FIRES that are readily extinguished. In addition to alarms, other indications of a FIRE could be a drop in fire main pressure, automatic activation of a suppression system, etc. Upon receipt, operators will take prompt actions to confirm the validity of an initial fire alarm, indication, or report. For EAL assessment purposes, the emergency declaration clock starts at the time that the initial alarm, indication, or report was received, and not the time that a subsequent verification action was performed. Similarly, the fire duration clock also starts at the time of receipt of the initial alarm, indication or report. EAL#2 This EAL addresses receipt of a single fire alarm, and the existence of a FIRE is not verified (i.e., proved or disproved) within 30-minutes of the alarm. Upon receipt, operators will take prompt actions to confirm the validity of a single fire alarm. For EAL assessment purposes, the 30-minute clock starts at the time that the initial alarm was received, and not the time that a subsequent verification action was performed. A single fire alarm, absent other indication(s) of a FIRE, may be indicative of equipment failure or a spurious activation, and not an actual FIRE. For this reason, additional time is allowed to verify the validity of the alarm. The 30-minute period is a reasonable amount of time to determine if an actual FIRE exists; however, after that time, and absent information to the contrary, it is assumed that an actual FIRE is in progress. If an actual FIRE is verified by a report from the field, then EAL #1 is immediately applicable, and the emergency must be declared ifthe FIRE is not extinguished within 15-minutes of the report. If the alarm is verified to be due to an equipment failure or a spurious activation, and this verification occurs within 30-minutes of the receipt of the alarm, then this EAL is not applicable and no emergency declaration is warranted. EAL#3 In addition to a FIRE addressed by EAL #1 or EAL #2, a FIRE within the plant PROTECTED AREA not extinguished within 60-minutes may also potentially degrade the level of plant safety. This basis extends to a FIRE occurring within the PROTECTED AREA or the Dry Fuel Storage Facility. 83 EAL#4 If a FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility is of sufficient size to require a response by an off site firefighting agency, then the level of plant safety is potentially degraded. The dispatch of an offsite firefighting agency to the site requires an emergency declaration only if it is needed to actively support firefighting efforts because the fire is beyond the capability of the Fire Brigade to extinguish. Declaration is not necessary if the agency resources are placed on stand-by, or supporting post-extinguishment recovery or investigation actions. Basis-Related Requirements from Appendix R Appendix R to 10 CFR 50, states in part: Criterion 3 of Appendix A to this part specifies that "Structures, systems, and components important to safety shall be designed and located to minimize, consistent with other safety requirements, the probability and effect of fires and explosions." When considering the effects of fire, those systems associated with achieving and maintaining safe shutdown conditions assume major importance to safety because damage to them can lead to core damage resulting from loss of coolant through boil-off. Because fire may affect safe shutdown systems and because the loss of function of systems used to mitigate the consequences of design basis accidents under post-fire conditions does not per se impact public safety, the need to limit fire damage to systems required to achieve and maintain safe shutdown conditions is greater than the need to limit fire damage to those systems required to mitigate the consequences of design basis accidents. In addition, Appendix R to 10 CFR 50, requires, among other considerations, the use of 1-hour fire barriers for the enclosure of cable and equipment and associated non-safety circuits of one redundant train (G.2.c). As used in EAL #2, the 30-minutes to verify a single alarm is well within this worst-case 1-hour time period. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 84 I I HU7 ECL: Notification of Unusual Event Initiating Condition: Other conditions exist which in the judgment of the STED/SED warrant declaration of an Unusual Event. Operating Mode Applicability: All Emergency Action Levels: (1) Other conditions exist which in the judgment of the STED/SED indicate that events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been initiated. No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. Basis: This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for a NOUE. 85 8 SYSTEM MALFUNCTION ICS/EALS Recognition Category "M" Initiating Condition Matrix GENERAL EMERGENCY SITE AREA EMERGENCY ALERT UNUSUAL EVENT MGl Prolonged loss of all MSl Loss of all offsite and MAI Loss of all but one MUI Loss of all offsite AC offsite and all onsite AC all onsite AC power to AC power source to power capability to emergency power to emergency buses. emergency buses for 15 emergency buses for 15 buses for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 minutes or longer. minutes or longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA2 UNPLANNED loss MU2 UNPLANNED loss of Control Room indications of Control Room indications for 15 minutes or longer with a for 15 minutes or longer. significant transient in Op. Modes: 1, 2, 3, 4 progress. Op. Modes: 1, 2, 3, 4 MU3 Reactor coolant activity greater than Technical Specification allowable limits. Op. Modes: 1, 2, 3, 4 MU4 RCS leakage for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 MSS Inability to shutdown MAS Automatic or manual MUS Automatic or manual the reactor causing a trip fails to shutdown the trip fails to shutdown the challenge to core cooling or reactor and subsequent reactor. RCS heat removal. manual actions taken at the Op. Modes: 1 Op. Modes: 1 Main Control Board are not successful in shutting down the reactor. Op. Modes: 1 MU6 Loss of all onsite or offsite communications capabilities. Op. Modes: 1, 2, 3, 4 MU7 Failure to isolate containment or loss of containment pressure control. Op. Modes: 1, 2, 3, 4 MGS Loss of all AC and MSS Loss of all Vital DC Vital DC power sources for 15 power for 15 minutes or minutes or longer. longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA9 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 1, 2, 3, 4 86 MG1 ECL: General Emergency Initiating Condition: Prolonged loss of all offsite and all onsite AC power to emergency buses. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Notes: (1) | * A containment fire alarm is considered valid upon receipt of multiple zones (more than 1) actuated on CP-376 panel. (1) OR a. AND A FIRE is NOT extinguished within 15-minutes of ANY of the following FIRE detection indications: | ||
Report from the field (i.e., visual observation) | |||
Receipt of multiple (more than 1) fire alarms or indications Field verification of a single fire alarm b. The FIRE is located within ANY Table H2 plant rooms or areas: Table H2 Condensate Storage Tank Enclosure Fuel Storage Building Containment Primary Auxiliary Building Control Building Service Water Pump House Cooling Tower Steam and Feedwater Pipe Chases Diesel Generator Building North Tank Farm Emergency Feedwater Pump House Startup Feedwater Pump Area RHR/CBS Equipment Vaults (2) a. Receipt of a single fire alarm (i.e., no other indications of a FIRE). OR AND b. The FIRE is located within ANY of the Table H2 plant rooms or areas except Containment in Modes 1 and 2 (see note above): AND c. The existence of a FIRE is not verified within 30-minutes of alarm receipt. | |||
(3) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility not extinguished within 60-minutes of the initial report, alarm or indication. | |||
OR (4) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility that requires firefighting support by an offsite fire response agency to extinguish. | |||
82 Basis: FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. | |||
PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. With regard to containment fire alarms, there is constant air movement in containment due to the operation of the CAH system. The operating cooling units are drawing air to the units past the smoke detectors. | |||
It can reasonably be expected that a fire that burns for 15 minutes would produce sufficient products of combustion to cause fire detectors in multiple zones to alarm. EAL#l The intent of the 15-minute duration is to size the FIRE and to discriminate against small FIRES that are readily extinguished. | |||
In addition to alarms, other indications of a FIRE could be a drop in fire main pressure, automatic activation of a suppression system, etc. Upon receipt, operators will take prompt actions to confirm the validity of an initial fire alarm, indication, or report. For EAL assessment purposes, the emergency declaration clock starts at the time that the initial alarm, indication, or report was received, and not the time that a subsequent verification action was performed. | |||
Similarly, the fire duration clock also starts at the time of receipt of the initial alarm, indication or report. EAL#2 This EAL addresses receipt of a single fire alarm, and the existence of a FIRE is not verified (i.e., proved or disproved) within 30-minutes of the alarm. Upon receipt, operators will take prompt actions to confirm the validity of a single fire alarm. For EAL assessment | |||
: purposes, the 30-minute clock starts at the time that the initial alarm was received, and not the time that a subsequent verification action was performed. | |||
A single fire alarm, absent other indication(s) of a FIRE, may be indicative of equipment failure or a spurious activation, and not an actual FIRE. For this reason, additional time is allowed to verify the validity of the alarm. The 30-minute period is a reasonable amount of time to determine if an actual FIRE exists; however, after that time, and absent information to the contrary, it is assumed that an actual FIRE is in progress. | |||
If an actual FIRE is verified by a report from the field, then EAL #1 is immediately applicable, and the emergency must be declared ifthe FIRE is not extinguished within 15-minutes of the report. If the alarm is verified to be due to an equipment failure or a spurious activation, and this verification occurs within 30-minutes of the receipt of the alarm, then this EAL is not applicable and no emergency declaration is warranted. | |||
EAL#3 In addition to a FIRE addressed by EAL #1 or EAL #2, a FIRE within the plant PROTECTED AREA not extinguished within 60-minutes may also potentially degrade the level of plant safety. This basis extends to a FIRE occurring within the PROTECTED AREA or the Dry Fuel Storage Facility. | |||
83 EAL#4 If a FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility is of sufficient size to require a response by an off site firefighting agency, then the level of plant safety is potentially degraded. | |||
The dispatch of an offsite firefighting agency to the site requires an emergency declaration only if it is needed to actively support firefighting efforts because the fire is beyond the capability of the Fire Brigade to extinguish. | |||
Declaration is not necessary if the agency resources are placed on stand-by, or supporting post-extinguishment recovery or investigation actions. | |||
Basis-Related Requirements from Appendix R Appendix R to 10 CFR 50, states in part: Criterion 3 of Appendix A to this part specifies that "Structures, | |||
: systems, and components important to safety shall be designed and located to minimize, consistent with other safety requirements, the probability and effect of fires and explosions." | |||
When considering the effects of fire, those systems associated with achieving and maintaining safe shutdown conditions assume major importance to safety because damage to them can lead to core damage resulting from loss of coolant through boil-off. | |||
Because fire may affect safe shutdown systems and because the loss of function of systems used to mitigate the consequences of design basis accidents under post-fire conditions does not per se impact public safety, the need to limit fire damage to systems required to achieve and maintain safe shutdown conditions is greater than the need to limit fire damage to those systems required to mitigate the consequences of design basis accidents. | |||
In addition, Appendix R to 10 CFR 50, requires, among other considerations, the use of 1-hour fire barriers for the enclosure of cable and equipment and associated non-safety circuits of one redundant train (G.2.c). | |||
As used in EAL #2, the 30-minutes to verify a single alarm is well within this worst-case 1-hour time period. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 84 I I HU7 ECL: Notification of Unusual Event Initiating Condition: | |||
Other conditions exist which in the judgment of the STED/SED warrant declaration of an Unusual Event. Operating Mode Applicability: | |||
All Emergency Action Levels: (1) Other conditions exist which in the judgment of the STED/SED indicate that events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been initiated. | |||
No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. Basis: This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for a NOUE. 85 8 SYSTEM MALFUNCTION ICS/EALS Recognition Category "M" Initiating Condition Matrix GENERAL EMERGENCY SITE AREA EMERGENCY ALERT UNUSUAL EVENT MGl Prolonged loss of all MSl Loss of all offsite and MAI Loss of all but one MUI Loss of all offsite AC offsite and all onsite AC all onsite AC power to AC power source to power capability to emergency power to emergency buses. emergency buses for 15 emergency buses for 15 buses for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 minutes or longer. minutes or longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA2 UNPLANNED loss MU2 UNPLANNED loss of Control Room indications of Control Room indications for 15 minutes or longer with a for 15 minutes or longer. significant transient in Op. Modes: 1, 2, 3, 4 progress. | |||
Op. Modes: 1, 2, 3, 4 MU3 Reactor coolant activity greater than Technical Specification allowable limits. Op. Modes: 1, 2, 3, 4 MU4 RCS leakage for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 MSS Inability to shutdown MAS Automatic or manual MUS Automatic or manual the reactor causing a trip fails to shutdown the trip fails to shutdown the challenge to core cooling or reactor and subsequent reactor. | |||
RCS heat removal. | |||
manual actions taken at the Op. Modes: 1 Op. Modes: 1 Main Control Board are not successful in shutting down the reactor. | |||
Op. Modes: 1 MU6 Loss of all onsite or offsite communications capabilities. | |||
Op. Modes: 1, 2, 3, 4 MU7 Failure to isolate containment or loss of containment pressure control. | |||
Op. Modes: 1, 2, 3, 4 MGS Loss of all AC and MSS Loss of all Vital DC Vital DC power sources for 15 power for 15 minutes or minutes or longer. longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA9 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 1, 2, 3, 4 86 MG1 ECL: General Emergency Initiating Condition: | |||
Prolonged loss of all offsite and all onsite AC power to emergency buses. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Notes: (1) | |||
* The STED/SED should declare the General Emergency promptly upon determining that 4 hours has been exceeded, or will likely be exceeded. | * The STED/SED should declare the General Emergency promptly upon determining that 4 hours has been exceeded, or will likely be exceeded. | ||
* For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. a. AND Loss of ALL offsite and ALL onsite AC power to BOTH AC emergency buses E5ANDE6. b. ANY of the following: Restoration of at least one AC emer enc bus in less than 4 hours is not likel Core Coolin C CSF RED ent Basis: This IC addresses a prolonged loss of all power sources to AC emergency buses. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. A prolonged loss of these buses will lead to a loss of one or more fission product barriers. In addition, fission product barrier monitoring capabilities may be degraded under these conditions. The EAL should require declaration of a General Emergency prior to meeting the thresholds for IC FG 1. This will allow additional time for implementation of offsite protective actions. Escalation of the emergency classification from Site Area Emergency will occur if it is projected that power cannot be restored to at least one AC emergency bus by the end of the analyzed station blackout coping period. Beyond this time, plant responses and event trajectory are subject to greater uncertainty, and there is an increased likelihood of challenges to multiple fission product barriers. The estimate for restoring at least one emergency bus should be based on a realistic appraisal of the situation. Mitigation actions with a low probability of success should not be used as a basis for delaying a classification upgrade. The goal is to maximize the time available to prepare for, and implement, protective actions for the public. The EAL will also require a General Emergency declaration if the loss of AC power results in parameters that indicate an inability to adequately remove decay heat from the core. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to 87 start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures | * For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. | ||
: a. AND Loss of ALL offsite and ALL onsite AC power to BOTH AC emergency buses E5ANDE6. | |||
: b. ANY of the following: | |||
Restoration of at least one AC emer enc bus in less than 4 hours is not likel Core Coolin C CSF RED ent Basis: This IC addresses a prolonged loss of all power sources to AC emergency buses. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure | |||
: control, spent fuel heat removal and the ultimate heat sink. A prolonged loss of these buses will lead to a loss of one or more fission product barriers. | |||
In addition, fission product barrier monitoring capabilities may be degraded under these conditions. | |||
The EAL should require declaration of a General Emergency prior to meeting the thresholds for IC FG 1. This will allow additional time for implementation of offsite protective actions. | |||
Escalation of the emergency classification from Site Area Emergency will occur if it is projected that power cannot be restored to at least one AC emergency bus by the end of the analyzed station blackout coping period. Beyond this time, plant responses and event trajectory are subject to greater uncertainty, and there is an increased likelihood of challenges to multiple fission product barriers. | |||
The estimate for restoring at least one emergency bus should be based on a realistic appraisal of the situation. | |||
Mitigation actions with a low probability of success should not be used as a basis for delaying a classification upgrade. | |||
The goal is to maximize the time available to prepare for, and implement, protective actions for the public. The EAL will also require a General Emergency declaration if the loss of AC power results in parameters that indicate an inability to adequately remove decay heat from the core. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to 87 start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | |||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems 88 MG8 ECL: General Emergency Initiating Condition: Loss of all AC and Vital DC power sources for lS minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Note: | |||
UFSAR Section 8.3.1, AC Power Systems 88 MG8 ECL: General Emergency Initiating Condition: | |||
Loss of all AC and Vital DC power sources for lS minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Note: | |||
* The STED/SED should declare the General Emergency promptly upon determining that 1 S minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the General Emergency promptly upon determining that 1 S minutes has been exceeded, or will likely be exceeded. | ||
* For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. (1) a. Loss of ALL offsite and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for l S minutes or longer. Basis: AND b. Indicated voltage is less than 1 OS V on ALL Vital DC buses l lA, 1 lB, 11 C and 1 lD for lS minutes or longer. This IC addresses a concurrent and prolonged loss of both AC and Vital DC power. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. A loss of Vital DC power compromises the ability to monitor and control SAFETY SYSTEMS. A sustained loss of both AC and DC power will lead to multiple challenges to fission product barriers. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. The lS-minute emergency declaration clock begins at the point when both EAL thresholds are met. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, Cl, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically 89 starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures | * For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. | ||
(1) a. Loss of ALL offsite and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for l S minutes or longer. Basis: AND b. Indicated voltage is less than 1 OS V on ALL Vital DC buses l lA, 1 lB, 11 C and 1 lD for lS minutes or longer. This IC addresses a concurrent and prolonged loss of both AC and Vital DC power. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure | |||
: control, spent fuel heat removal and the ultimate heat sink. A loss of Vital DC power compromises the ability to monitor and control SAFETY SYSTEMS. | |||
A sustained loss of both AC and DC power will lead to multiple challenges to fission product barriers. | |||
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. The lS-minute emergency declaration clock begins at the point when both EAL thresholds are met. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, Cl, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | |||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically 89 | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems 90 MS1 ECL: Site Area Emergency Initiating Condition: Loss of all offsite and all onsite AC power to emergency buses for lS minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Note: | |||
UFSAR Section 8.3.1, AC Power Systems 90 MS1 ECL: Site Area Emergency Initiating Condition: | |||
Loss of all offsite and all onsite AC power to emergency buses for lS minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Note: | |||
* The STED/SED should declare the Site Area Emergency promptly upon determining that l S minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Site Area Emergency promptly upon determining that l S minutes has been exceeded, or will likely be exceeded. | ||
* For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. (1) Loss of ALL off site and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for 1 S minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure control, spent fuel heat removal and the ultimate heat sink. In addition, fission product barrier monitoring capabilities may be degraded under these conditions. This IC represents a condition that involves actual or likely major failures of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via I Cs RG 1, FG 1 or MG 1. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-S (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design 91 requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures | * For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. | ||
(1) Loss of ALL off site and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for 1 S minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure | |||
: control, spent fuel heat removal and the ultimate heat sink. In addition, fission product barrier monitoring capabilities may be degraded under these conditions. | |||
This IC represents a condition that involves actual or likely major failures of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via I Cs RG 1, FG 1 or MG 1. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-S (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | |||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design 91 requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems 92 MSS ECL: Site Area Emergency Initiating Condition: Inability to shutdown the reactor causing a challenge to core cooling or RCS heat removal. Operating Mode Applicability: 1 Emergency Action Levels: (1) a. AND b. AND c. Basis: An automatic or manual trip did not shutdown the reactor. All manual actions to shutdown the reactor have been unsuccessful. EITHER of the following conditions exist: Core Coolin C CSF RED entr conditions met. Heat Sink H CSF RED entr conditions met. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, all subsequent operator actions to manually shutdown the reactor are unsuccessful, and continued power generation is challenging the capability to adequately remove heat from the core and/or the RCS. This condition will lead to fuel damage if additional mitigation actions are unsuccessful and thus warrants the declaration of a Site Area Emergency. In some instances, the emergency classification resulting from this IC/EAL may be higher than that resulting from an assessment of the plant responses and symptoms against the Recognition Category F ICs/EALs. This is appropriate in that the Recognition Category F ICs/EALs do not address the additional threat posed by a failure to shutdown the reactor. The inclusion of this IC and EAL ensures the timely declaration of a Site Area Emergency in response to prolonged failure to shutdown the reactor. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. Escalation of the emergency classification level would be via IC RG 1 or FG 1. 93 MS8 ECL: Site Area Emergency Initiating Condition: Loss of all Vital DC power for 15 minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) Indicated voltage is less than 105V on ALL vital DC buses 1 lA, 1 lB, 11 C and 1 lD buses for 15 minutes or longer. Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control SAFETY SYSTEMS. In modes above Cold Shutdown, this condition involves a major failure of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via ICs RG 1, FG 1 or MG8. 94 MA1 ECL: Alert Initiating Condition: Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Notes: | |||
UFSAR Section 8.3.1, AC Power Systems 92 MSS ECL: Site Area Emergency Initiating Condition: | |||
Inability to shutdown the reactor causing a challenge to core cooling or RCS heat removal. | |||
Operating Mode Applicability: | |||
1 Emergency Action Levels: (1) a. AND b. AND c. Basis: An automatic or manual trip did not shutdown the reactor. | |||
All manual actions to shutdown the reactor have been unsuccessful. | |||
EITHER of the following conditions exist: Core Coolin C CSF RED entr conditions met. Heat Sink H CSF RED entr conditions met. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, all subsequent operator actions to manually shutdown the reactor are unsuccessful, and continued power generation is challenging the capability to adequately remove heat from the core and/or the RCS. This condition will lead to fuel damage if additional mitigation actions are unsuccessful and thus warrants the declaration of a Site Area Emergency. | |||
In some instances, the emergency classification resulting from this IC/EAL may be higher than that resulting from an assessment of the plant responses and symptoms against the Recognition Category F ICs/EALs. | |||
This is appropriate in that the Recognition Category F ICs/EALs do not address the additional threat posed by a failure to shutdown the reactor. | |||
The inclusion of this IC and EAL ensures the timely declaration of a Site Area Emergency in response to prolonged failure to shutdown the reactor. | |||
A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. | |||
Escalation of the emergency classification level would be via IC RG 1 or FG 1. 93 MS8 ECL: Site Area Emergency Initiating Condition: | |||
Loss of all Vital DC power for 15 minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) Indicated voltage is less than 105V on ALL vital DC buses 1 lA, 1 lB, 11 C and 1 lD buses for 15 minutes or longer. Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control SAFETY SYSTEMS. | |||
In modes above Cold Shutdown, this condition involves a major failure of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via ICs RG 1, FG 1 or MG8. 94 MA1 ECL: Alert Initiating Condition: | |||
Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Notes: | |||
* The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | * The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | ||
* For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. 1) a AC power capability to BOTH AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. Basis: NOTE There are six power sources to consider: | * For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional. | ||
: 1) a AC power capability to BOTH AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. | |||
Basis: NOTE There are six power sources to consider: | |||
* 345 kV offsite power line 369 | * 345 kV offsite power line 369 | ||
* 345 kV offsite power line 363 | * 345 kV offsite power line 363 | ||
Line 142: | Line 1,003: | ||
* Emergency Diesel Generator A | * Emergency Diesel Generator A | ||
* Emergency Diesel Generator B | * Emergency Diesel Generator B | ||
* SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. In this condition, the sole AC power source may be powering one, or more than one, train of related equipment. This IC provides an escalation path from IC MUI. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Some examples of this condition are presented below. | * SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. | ||
This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS. | |||
In this condition, the sole AC power source may be powering one, or more than one, train of related equipment. | |||
This IC provides an escalation path from IC MUI. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Some examples of this condition are presented below. | |||
* A loss of all offsite power with a concurrent failure of all but one emergency power source. 95 | * A loss of all offsite power with a concurrent failure of all but one emergency power source. 95 | ||
* A loss of all offsite power and loss of all emergency power sources with a single train of emergency buses being back-fed from the unit main generator. | * A loss of all offsite power and loss of all emergency power sources with a single train of emergency buses being back-fed from the unit main generator. | ||
* A loss of emergency power sources with a single train of emergency buses being back-fed from an offsite power source. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. Escalation of the emergency classification level would be via IC MS 1. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. The use of the SEPS is recognized in the Emergency Operating Procedures | * A loss of emergency power sources with a single train of emergency buses being back-fed from an offsite power source. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. Escalation of the emergency classification level would be via IC MS 1. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters. | ||
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007. | |||
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets) | |||
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically | |||
: starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional. | |||
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling. | |||
The use of the SEPS is recognized in the Emergency Operating Procedures | |||
==Reference:== | ==Reference:== | ||
UFSAR Section 8.3.1, AC Power Systems 96 MA2 ECL: Alert Initiating Condition: UNPLANNED loss of Control Room indications for 15 minutes or longer with a significant transient in progress. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) Basis: a. AND An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow b. ANY of the following transient events in progress. Automatic or manual runback greater than 25% thermal reactor power Electrical load rejection greater than 25% full electrical load Reactor trip SI actuation UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses the difficulty associated with monitoring rapidly changing plant conditions during a transient without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. During this condition, the margin to a potential fission product barrier challenge is reduced. It thus represents a potential substantial degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s). For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required. The event would be reported if it significantly impaired the capability to perform emergency assessments. In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency 97 plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making. This EAL is focused on a selected subset of plant parameters associated with the key safety functions of reactivity control, core cooling and RCS heat removal. The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition. In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter values may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. Escalation of the emergency classification level would be via ICs FSl or IC RSI. 98 MAS ECL: Alert Initiating Condition: Automatic or manual trip fails to shutdown the reactor, and subsequent manual actions taken at the Main Control Board are not successful in shutting down the reactor. Operating Mode Applicability: 1 Emergency Action Level: Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies. (1) a. An automatic or manual trip did not shutdown the reactor. AND b. Manual actions taken at the MCB are not successful in shutting down the reactor. Basis: This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and subsequent operator manual actions taken at the MCB to shutdown the reactor are also unsuccessful. This condition represents an actual or potential substantial degradation of the level of safety of the plant. An emergency declaration is required even ifthe reactor is subsequently shutdown by an action taken away from the MCB since this event entails a significant failure of the RPS. A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies. If this action(s) is unsuccessful, operators would immediately pursue additional manual actions at locations away from the MCB. Actions taken at back-panels or other locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If the failure to shutdown the reactor is prolonged enough to cause a challenge to the core cooling or RCS heat removal safety functions, the emergency classification level will escalate to a Site Area Emergency via IC MS5. Depending upon plant responses and symptoms, escalation is also possible via IC FSl. Absent the plant conditions needed to meet either IC MS5 or FSl, an Alert declaration is appropriate for this event. It is recognized that plant responses or symptoms may also require an Alert declaration in accordance with the Recognition Category FI Cs; however, this IC and EAL are included to ensure a timely emergency declaration. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. 99 MA9 ECL: Alert Initiating Condition: Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake) Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following: I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. EXPLOSION: A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion. Such events may require a post-event inspection to determine if the attributes of an explosion are present. VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, testing, or analysis. The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 100 EAL l .b.1 addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available. The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components. Operators will make this determination based on the totality of available event and damage report information. This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC FSl or RSI. 101 ECL: Notification of Unusual Event Initiating Condition: Loss of all offsite AC power capability to emergency buses for 15 minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: MU1 Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) Loss of ALL offsite AC power capability to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a prolonged loss of offsite power. The loss of offsite power sources renders the plant more vulnerable to a complete loss of power to AC emergency buses. This condition represents a potential reduction in the level of safety of the plant. For emergency classification purposes, "capability" means that an offsite AC power source(s) is available to the emergency buses, whether or not the buses are powered from it. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of offsite power. Escalation of the emergency classification level would be via IC MAI. 102 MU2 ECL: Notification of Unusual Event Initiating Condition: UNPLANNED loss of Control Room indications for 15 minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow Basis: UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. This IC addresses the difficulty associated with monitoring normal plant conditions without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. This condition is a precursor to a more significant event and represents a potential degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s). For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required. The event would be reported if it significantly impaired the capability to perform emergency assessments. In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making. This EAL is focused on a selected subset of plant parameters associated with the key safety functions ofreactivity control, core cooling and RCS heat removal. The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition. In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other 103 SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter valu.es may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. Escalation of the emergency classification level would be via IC MA2. 104 J MU3 ECL: Notification of Unusual Event Initiating Condition: Reactor coolant activity greater than Technical Specification allowable limits. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: (1 or 2) (1) RM-6520-lreading greater than 2,670 mR/hr. OR (2) Sample analysis indicates that a reactor coolant activity value is greater than the Limiting Condition for Operation (LCO) specified in Technical Specification 3.4.8 Reactor Coolant System Specific Activity. Basis: This IC addresses a reactor coolant activity value that exceeds an allowable limit specified in Technical Specifications. This condition is a precursor to a more significant event and represents a potential degradation of the level of safety of the plant. Escalation of the emergency classification level would be via ICs FAl or the Recognition Category RI Cs. 105 MU4 ECL: Notification of Unusual Event Initiating Condition: RCS leakage for 15 minutes or longer. Operating Mode Applicability: 1, 2, 3, 4 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. (1) RCS unidentified or PRESSURE BOUNDARY LEAKAGE greater than 10 gpm for 15 minutes or longer. OR (2) RCS IDENTIFIED LEAKAGE greater than 25 gpm for 15 minutes or longer. OR (3) Leakage from the RCS to a location outside containment greater than 25 gpm for 15 minutes or longer. Basis: IDENTIFIED LEAKAGE a. Leakage (except CONTROLLED LEAKAGE) into closed systems, such as pump seal or valve packing leaks that are captured and conducted to a sump or collecting tank, or b. Leakage into the containment atmosphere from sources that are both specifically located and known either not to interfere with the operation of Leakage Detection Systems or not to be PRESSURE BOUNDARY LEAKAGE, or c. Reactor Coolant System leakage through a steam generator to the Secondary Coolant System (primary to secondary leakage). PRESSURE BOUNDARY LEAKAGE a. PRESSURE BOUNDARY LEAKAGE shall be leakage (except primary to secondary leakage) through a nonisolable fault in a Reactor Coolant System component body, pipe wall, or vessel wall. This IC addresses RCS leakage which may be a precursor to a more significant event. In this case, RCS leakage has been detected and operators, following applicable procedures, have been unable to promptly isolate the leak. This condition is considered to be a potential degradation of the level of safety of the plant. EAL #1 and EAL #2 are focused on a loss of mass from the RCS due to "unidentified leakage", "pressure boundary leakage" or "identified leakage" (as these leakage types are defined in the plant Technical Specifications). EAL #3 addresses a RCS mass loss caused by an UNISOLABLE leak through an interfacing system. These EALs thus apply to leakage into the containment, a secondary-side system or a location outside of containment. The leak rate values for each EAL were selected because they are usually observable with normal Control Room indications. Lesser values typically require time-consuming calculations 106 to determine). EAL #1 uses a lower value that reflects the greater significance of unidentified or pressure boundary leakage. The release of mass from the RCS due to the as-designed/expected operation of a relief valve does not warrant an emergency classification. For PWRs, an emergency classification would be required if a mass loss is caused by a relief valve that is not functioning as designed/expected. The 15-minute threshold duration allows sufficient time for prompt operator actions to isolate the leakage, if possible. Escalation of the emergency classification level would be via ICs of Recognition Category R or F. 107 MUS ECL: Notification of Unusual Event Initiating Condition: Automatic or manual trip fails to shutdown the reactor. Operating Mode Applicability: 1 Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies. Emergency Action Levels: (1 or 2) (1) a. AND b. OR (2) a. AND b. Basis: An automatic trip did not shutdown the reactor. A subsequent manual action taken at the MCB is successful in shutting down the reactor. A manual trip did not shutdown the reactor. EITHER of the following: 1. A subsequent manual action taken at the MCB is successful in shutting down the reactor. OR 2. A subsequent automatic trip is successful in shutting down the reactor. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and either a subsequent operator manual action taken at the MCB or an automatic trip is successful in shutting down the reactor. This event is a precursor to a more significant condition and thus represents a potential degradation of the level of safety of the plant. Following the failure on an automatic reactor trip, operators will promptly initiate manual actions at the MCB to shutdown the reactor. If these manual actions are successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. If an initial manual reactor trip is unsuccessful, operators will promptly take manual action at another location(s) on the MCB to shutdown the reactor. Depending upon several factors, the initial or subsequent effort to manually trip the reactor, or a concurrent plant condition, may lead to the generation of an automatic reactor trip signal. If a subsequent manual or automatic trip is successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies. Actions taken at back-panels or other 108 locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If subsequent operator manual actions taken at the MCB are also unsuccessful in shutting down the reactor, then the emergency classification level will escalate to an Alert via IC MA5. Depending upon the plant response, escalation is also possible via IC FAl. Absent the plant conditions needed to meet either IC MA5 or FAl, an Unusual Event declaration is appropriate for this event. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. Should a reactor trip signal be generated as a result of plant work, the following classification guidance should be applied. | |||
UFSAR Section 8.3.1, AC Power Systems 96 MA2 ECL: Alert Initiating Condition: | |||
UNPLANNED loss of Control Room indications for 15 minutes or longer with a significant transient in progress. | |||
Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) Basis: a. AND An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow b. ANY of the following transient events in progress. | |||
Automatic or manual runback greater than 25% thermal reactor power Electrical load rejection greater than 25% full electrical load Reactor trip SI actuation UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses the difficulty associated with monitoring rapidly changing plant conditions during a transient without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. During this condition, the margin to a potential fission product barrier challenge is reduced. | |||
It thus represents a potential substantial degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s). | |||
For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required. | |||
The event would be reported if it significantly impaired the capability to perform emergency assessments. | |||
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency 97 plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making. | |||
This EAL is focused on a selected subset of plant parameters associated with the key safety functions of reactivity | |||
: control, core cooling and RCS heat removal. | |||
The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition. | |||
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter values may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. | |||
Escalation of the emergency classification level would be via ICs FSl or IC RSI. 98 MAS ECL: Alert Initiating Condition: | |||
Automatic or manual trip fails to shutdown the reactor, and subsequent manual actions taken at the Main Control Board are not successful in shutting down the reactor. | |||
Operating Mode Applicability: | |||
1 Emergency Action Level: Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies. | |||
(1) a. An automatic or manual trip did not shutdown the reactor. | |||
AND b. Manual actions taken at the MCB are not successful in shutting down the reactor. | |||
Basis: This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and subsequent operator manual actions taken at the MCB to shutdown the reactor are also unsuccessful. | |||
This condition represents an actual or potential substantial degradation of the level of safety of the plant. An emergency declaration is required even ifthe reactor is subsequently shutdown by an action taken away from the MCB since this event entails a significant failure of the RPS. A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies. | |||
If this action(s) is unsuccessful, operators would immediately pursue additional manual actions at locations away from the MCB. Actions taken at back-panels or other locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If the failure to shutdown the reactor is prolonged enough to cause a challenge to the core cooling or RCS heat removal safety functions, the emergency classification level will escalate to a Site Area Emergency via IC MS5. Depending upon plant responses and symptoms, escalation is also possible via IC FSl. Absent the plant conditions needed to meet either IC MS5 or FSl, an Alert declaration is appropriate for this event. It is recognized that plant responses or symptoms may also require an Alert declaration in accordance with the Recognition Category FI Cs; however, this IC and EAL are included to ensure a timely emergency declaration. | |||
A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. | |||
99 MA9 ECL: Alert Initiating Condition: | |||
Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake) | |||
Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following: | |||
I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related. | |||
FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. | |||
EXPLOSION: | |||
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. | |||
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion. | |||
Such events may require a post-event inspection to determine if the attributes of an explosion are present. | |||
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, | |||
: testing, or analysis. | |||
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. | |||
This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 100 EAL l .b.1 addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available. | |||
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components. | |||
Operators will make this determination based on the totality of available event and damage report information. | |||
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC FSl or RSI. 101 ECL: Notification of Unusual Event Initiating Condition: | |||
Loss of all offsite AC power capability to emergency buses for 15 minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: MU1 Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) Loss of ALL offsite AC power capability to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a prolonged loss of offsite power. The loss of offsite power sources renders the plant more vulnerable to a complete loss of power to AC emergency buses. This condition represents a potential reduction in the level of safety of the plant. For emergency classification | |||
: purposes, "capability" means that an offsite AC power source(s) is available to the emergency buses, whether or not the buses are powered from it. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of offsite power. Escalation of the emergency classification level would be via IC MAI. 102 MU2 ECL: Notification of Unusual Event Initiating Condition: | |||
UNPLANNED loss of Control Room indications for 15 minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow Basis: UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
This IC addresses the difficulty associated with monitoring normal plant conditions without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. This condition is a precursor to a more significant event and represents a potential degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s). | |||
For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required. | |||
The event would be reported if it significantly impaired the capability to perform emergency assessments. | |||
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making. | |||
This EAL is focused on a selected subset of plant parameters associated with the key safety functions ofreactivity | |||
: control, core cooling and RCS heat removal. | |||
The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition. | |||
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other 103 SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter valu.es may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication. | |||
Escalation of the emergency classification level would be via IC MA2. 104 J MU3 ECL: Notification of Unusual Event Initiating Condition: | |||
Reactor coolant activity greater than Technical Specification allowable limits. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: (1 or 2) (1) RM-6520-lreading greater than 2,670 mR/hr. OR (2) Sample analysis indicates that a reactor coolant activity value is greater than the Limiting Condition for Operation (LCO) specified in Technical Specification 3.4.8 Reactor Coolant System Specific Activity. | |||
Basis: This IC addresses a reactor coolant activity value that exceeds an allowable limit specified in Technical Specifications. | |||
This condition is a precursor to a more significant event and represents a potential degradation of the level of safety of the plant. Escalation of the emergency classification level would be via ICs FAl or the Recognition Category RI Cs. 105 MU4 ECL: Notification of Unusual Event Initiating Condition: | |||
RCS leakage for 15 minutes or longer. Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded. | |||
(1) RCS unidentified or PRESSURE BOUNDARY LEAKAGE greater than 10 gpm for 15 minutes or longer. OR (2) RCS IDENTIFIED LEAKAGE greater than 25 gpm for 15 minutes or longer. OR (3) Leakage from the RCS to a location outside containment greater than 25 gpm for 15 minutes or longer. Basis: IDENTIFIED LEAKAGE a. Leakage (except CONTROLLED LEAKAGE) into closed systems, such as pump seal or valve packing leaks that are captured and conducted to a sump or collecting tank, or b. Leakage into the containment atmosphere from sources that are both specifically located and known either not to interfere with the operation of Leakage Detection Systems or not to be PRESSURE BOUNDARY | |||
: LEAKAGE, or c. Reactor Coolant System leakage through a steam generator to the Secondary Coolant System (primary to secondary leakage). | |||
PRESSURE BOUNDARY LEAKAGE a. PRESSURE BOUNDARY LEAKAGE shall be leakage (except primary to secondary leakage) through a nonisolable fault in a Reactor Coolant System component body, pipe wall, or vessel wall. This IC addresses RCS leakage which may be a precursor to a more significant event. In this case, RCS leakage has been detected and operators, following applicable procedures, have been unable to promptly isolate the leak. This condition is considered to be a potential degradation of the level of safety of the plant. EAL #1 and EAL #2 are focused on a loss of mass from the RCS due to "unidentified leakage", | |||
"pressure boundary leakage" or "identified leakage" (as these leakage types are defined in the plant Technical Specifications). | |||
EAL #3 addresses a RCS mass loss caused by an UNISOLABLE leak through an interfacing system. These EALs thus apply to leakage into the containment, a secondary-side system or a location outside of containment. | |||
The leak rate values for each EAL were selected because they are usually observable with normal Control Room indications. | |||
Lesser values typically require time-consuming calculations 106 to determine). | |||
EAL #1 uses a lower value that reflects the greater significance of unidentified or pressure boundary leakage. | |||
The release of mass from the RCS due to the as-designed/expected operation of a relief valve does not warrant an emergency classification. | |||
For PWRs, an emergency classification would be required if a mass loss is caused by a relief valve that is not functioning as designed/expected. | |||
The 15-minute threshold duration allows sufficient time for prompt operator actions to isolate the leakage, if possible. | |||
Escalation of the emergency classification level would be via ICs of Recognition Category R or F. 107 MUS ECL: Notification of Unusual Event Initiating Condition: | |||
Automatic or manual trip fails to shutdown the reactor. | |||
Operating Mode Applicability: | |||
1 Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies. | |||
Emergency Action Levels: (1 or 2) (1) a. AND b. OR (2) a. AND b. Basis: An automatic trip did not shutdown the reactor. | |||
A subsequent manual action taken at the MCB is successful in shutting down the reactor. | |||
A manual trip did not shutdown the reactor. | |||
EITHER of the following: | |||
: 1. A subsequent manual action taken at the MCB is successful in shutting down the reactor. | |||
OR 2. A subsequent automatic trip is successful in shutting down the reactor. | |||
This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and either a subsequent operator manual action taken at the MCB or an automatic trip is successful in shutting down the reactor. | |||
This event is a precursor to a more significant condition and thus represents a potential degradation of the level of safety of the plant. Following the failure on an automatic reactor trip, operators will promptly initiate manual actions at the MCB to shutdown the reactor. | |||
If these manual actions are successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. | |||
If an initial manual reactor trip is unsuccessful, operators will promptly take manual action at another location(s) on the MCB to shutdown the reactor. | |||
Depending upon several factors, the initial or subsequent effort to manually trip the reactor, or a concurrent plant condition, may lead to the generation of an automatic reactor trip signal. If a subsequent manual or automatic trip is successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems. | |||
A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies. | |||
Actions taken at back-panels or other 108 locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If subsequent operator manual actions taken at the MCB are also unsuccessful in shutting down the reactor, then the emergency classification level will escalate to an Alert via IC MA5. Depending upon the plant response, escalation is also possible via IC FAl. Absent the plant conditions needed to meet either IC MA5 or FAl, an Unusual Event declaration is appropriate for this event. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria. | |||
Should a reactor trip signal be generated as a result of plant work, the following classification guidance should be applied. | |||
* If the signal causes a plant transient that should have included an automatic reactor trip and the RPS fails to automatically shutdown the reactor, then this IC and the EALs are applicable, and should be evaluated. | * If the signal causes a plant transient that should have included an automatic reactor trip and the RPS fails to automatically shutdown the reactor, then this IC and the EALs are applicable, and should be evaluated. | ||
* If the signal does not cause a plant transient and the trip failure is determined through other means, then this IC and the EALs are not applicable and no classification is warranted. | |||
109 ECL: Notification of Unusual Event Initiating Condition: | |||
Loss of all onsite or offsite communications capabilities. | |||
Operating Mode Applicability: | |||
1, 2, 3, 4 Emergency Action Levels: (1 or 2 or 3) (1) Loss of ALL of the following onsite communication methods: | |||
In | |||
* Notification of Unusual Event (NOUE) | * Notification of Unusual Event (NOUE) | ||
* Alert | * Alert | ||
* Site Area Emergency (SAE) | * Site Area Emergency (SAE) | ||
* General Emergency (GE) Fission Product Barrier Threshold: A pre-determined, observable threshold indicating the loss or potential loss of a fission product barrier. Initiating Condition (IC): An event or condition that aligns with the definition of one of the four emergency classification levels by virtue of the potential or actual effects or consequences. A-3 Selected terms used in Initiating Condition and Emergency Action Level statements are set in all capital letters (e.g., ALL CAPS). These words are defined terms that have specific meanings as used in this document. The definitions of these terms are provided below. CONFINEMENT BOUNDARY: -The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage. CONTAINMENT INTEGRITY:-The procedurally defined conditions or actions taken to secure containment and its associated structures, systems, and components as a functional barrier to fission product release under shutdown conditions. EXPLOSION: A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, . etc.) should not automatically be considered an explosion. Such events may require a post-event inspection to determine if the attributes of an explosion are present. FAUL TED: The term applied to a steam generator that has a steam leak on the secondary side of sufficient size to cause an uncontrolled drop in steam generator pressure or the steam generator to become completely depressurized. FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. HOSTAGE: A person(s) held as leverage against the station to ensure that demands will be met by the station. HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. Non-terrorism-based EALs should be used to address such activities (i.e., this may include violent acts between individuals in the owner controlled area). HOSTILE FORCE: One or more individuals who are engaged in a determined assault, overtly or by stealth and deception, equipped with suitable weapons capable of killing, maiming, or causing destruction. IMMINENT: The trajectory of events or conditions is such that an EAL will be met within a relatively short period of time regardless of mitigation or corrective actions. IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI): A complex that is designed and constructed for the interim storage of spent nuclear fuel and other radioactive materials associated with spent fuel storage. (Dry Fuel Storage Facility) A-4 INTACT: Capable of being pressurized. OWNER CONTROLLED AREA: The site property owned by, or otherwise under the control of, the licensee. PROJECTILE: An object directed toward a NPP that could cause concern for its continued operability, reliability, or personnel safety. PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. REFUELING PATHWAY: The reactor refueling cavity, spent fuel pool and fuel transfer canal. RUPTURE(D): The condition of a steam generator in which primary-to-secondary leakage is of sufficient magnitude to require a safety injection. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. These are typically systems classified as safety-related. SECURITY CONDITION: Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. UNISOLABLE: An open or breached system line that cannot be isolated, remotely or locally. UNPLANNED: A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. The cause of the parameter change or event may be known or unknown. VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, testing, or analysis. The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. A-5 | * General Emergency (GE) Fission Product Barrier Threshold: | ||
ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RGl: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous radioactivity resulting in offsite dose greater than Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem 1,000 mrem TEDE or 5,000 mrem thyroid CDE. TEDE or 5,000 mrem thyroid CDE. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 2 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (1) Reading on ANY of the following radiation monitors greater (I) Reading on ANY of the following radiation monitors greater than the than the reading shown for 15 minutes or longer: reading shown for 15 minutes or longer: (site-specific monitor list and threshold values) Monitor :Reading (2) Dose assessment using actual meteorology indicates doses RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond (site-specific dose receptor point). Ffliiie After Shutdown Reading (3) Field survey results indicate EITHER of the following at or :SI hr > I hr to ::; 2 hrs beyond (site-specific dose receptor point): * (MSL A) | A pre-determined, observable threshold indicating the loss or potential loss of a fission product barrier. | ||
Initiating Condition (IC): An event or condition that aligns with the definition of one of the four emergency classification levels by virtue of the potential or actual effects or consequences. | |||
A-3 Selected terms used in Initiating Condition and Emergency Action Level statements are set in all capital letters (e.g., ALL CAPS). These words are defined terms that have specific meanings as used in this document. | |||
The definitions of these terms are provided below. CONFINEMENT BOUNDARY: | |||
-The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage. | |||
CONTAINMENT INTEGRITY:- | |||
The procedurally defined conditions or actions taken to secure containment and its associated structures, | |||
: systems, and components as a functional barrier to fission product release under shutdown conditions. | |||
EXPLOSION: | |||
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization. | |||
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, . etc.) should not automatically be considered an explosion. | |||
Such events may require a post-event inspection to determine if the attributes of an explosion are present. | |||
FAUL TED: The term applied to a steam generator that has a steam leak on the secondary side of sufficient size to cause an uncontrolled drop in steam generator pressure or the steam generator to become completely depressurized. | |||
FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed. | |||
HOSTAGE: | |||
A person(s) held as leverage against the station to ensure that demands will be met by the station. | |||
HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs, | |||
: vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included. | |||
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. Non-terrorism-based EALs should be used to address such activities (i.e., this may include violent acts between individuals in the owner controlled area). HOSTILE FORCE: One or more individuals who are engaged in a determined | |||
: assault, overtly or by stealth and deception, equipped with suitable weapons capable of killing, | |||
: maiming, or causing destruction. | |||
IMMINENT: | |||
The trajectory of events or conditions is such that an EAL will be met within a relatively short period of time regardless of mitigation or corrective actions. | |||
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI): | |||
A complex that is designed and constructed for the interim storage of spent nuclear fuel and other radioactive materials associated with spent fuel storage. (Dry Fuel Storage Facility) | |||
A-4 INTACT: Capable of being pressurized. | |||
OWNER CONTROLLED AREA: The site property owned by, or otherwise under the control of, the licensee. | |||
PROJECTILE: | |||
An object directed toward a NPP that could cause concern for its continued operability, reliability, or personnel safety. PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. REFUELING PATHWAY: | |||
The reactor refueling cavity, spent fuel pool and fuel transfer canal. RUPTURE(D): | |||
The condition of a steam generator in which primary-to-secondary leakage is of sufficient magnitude to require a safety injection. | |||
SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. These are typically systems classified as safety-related. | |||
SECURITY CONDITION: | |||
Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. UNISOLABLE: | |||
An open or breached system line that cannot be isolated, remotely or locally. | |||
UNPLANNED: | |||
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient. | |||
The cause of the parameter change or event may be known or unknown. | |||
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements, | |||
: testing, or analysis. | |||
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure. | |||
A-5 Enclosure 4 to SBK-L-16196 Enclosure 4 NEI 99-01, Rev. 6, Deviations and Differences, Seabrook Station Nuclear Power Plant -Unit 1 NEI 99-01 Rev 6 Deviations and Differences Seabrook Station Nuclear Power Plant -Unit 1 GENERIC DIFFERENCES NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant References BWRs Deleted BWR references as annrooriate Uses A for radiological effluent/radiation level I Cs Uses R for radiological effluent/radiation level I Cs Uses E-HU for ISFSI ICs Uses EU for ISFSI ICs Uses S for Svstem Malfunction I Cs Uses M for System Malfunction I Cs Emergency Classification I Cs are presented in ascending order (NOUE-GE) Emergency Classification I Cs are presented in descending order (GE -NOUE) GENERAL NOTES All NOTEs made site soecific by identifying the STED/SED as the user. Site specific information is highlighted in yellow. No deviations were indicated to complete the upgrade to Revision | |||
: 6. | |||
ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RGl: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous radioactivity resulting in offsite dose greater than Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem 1,000 mrem TEDE or 5,000 mrem thyroid CDE. TEDE or 5,000 mrem thyroid CDE. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 2 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (1) Reading on ANY of the following radiation monitors greater (I) Reading on ANY of the following radiation monitors greater than the than the reading shown for 15 minutes or longer: reading shown for 15 minutes or longer: (site-specific monitor list and threshold values) Monitor :Reading (2) Dose assessment using actual meteorology indicates doses RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond (site-specific dose receptor point). Ffliiie After Shutdown Reading (3) Field survey results indicate EITHER of the following at or :SI hr > I hr to ::; 2 hrs beyond (site-specific dose receptor point): | |||
* (MSL A) | |||
* Closed window dose rates greater than 1,000 mR/hr 1310mR/hr 1060 mR/hr expected to continue for 60 minutes or longer. RM-6482-1 * (MSL B) 1310mR/hr 1060 mR/hr | * Closed window dose rates greater than 1,000 mR/hr 1310mR/hr 1060 mR/hr expected to continue for 60 minutes or longer. RM-6482-1 * (MSL B) 1310mR/hr 1060 mR/hr | ||
* Analyses of field survey samples indicate thyroid COE RM-6482-2* (MSL C) greater than 5,000 mrem for one hour of inhalation. 1310 mR/hr 1060 mR/hr (MSL D) 1310mR/hr 1060 mR/hr | * Analyses of field survey samples indicate thyroid COE RM-6482-2* | ||
* With release path to the environment from affected steam line, e.g., o en ASDV or SR V, line is faulted, ORen steam sl!QIJ!y to I FW P 37 A. (2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundarv: I Closed window dose rates greater than 1,000 mR/hr expected to continue for 60 minutes or longer. I Analyses of field survey samples indicate thyroid COE greater than 5,000 mrem for one hour of inhalation. Difference /Justification RGI.I: Site specific information, see Y3 EPCALC-06-02 -Effluent Monitor Values for R EALs RGl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RG2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level cannot be restored to at least (site-specific Level 3 Spent fuel pool level cannot be restored to at least I .5 ft. (Level3) for 60 description) for 60 minutes or longer. minutes or longer. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Spent fuel pool level cannot be restored to at least (site-specific (1) Spent fuel pool level cannot be restored to at least I .5 ft. above the fuel Level 3 value) for 60 minutes or longer. racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS com uter oint A4172 or SF-Ll-2617 (MPCS computer oint A4220 Difference /Justification RG2.1: Site specific information, see V2 SFP Levels Drawing 4 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous | (MSL C) greater than 5,000 mrem for one hour of inhalation. 1310 mR/hr 1060 mR/hr (MSL D) 1310mR/hr 1060 mR/hr | ||
* With release path to the environment from affected steam line, e.g., o en ASDV or SR V, line is faulted, ORen steam sl!QIJ!y to I FW P 37 A. (2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundarv: I Closed window dose rates greater than 1,000 mR/hr expected to continue for 60 minutes or longer. I Analyses of field survey samples indicate thyroid COE greater than 5,000 mrem for one hour of inhalation. Difference /Justification RGI.I: Site specific information, see Y3 EPCALC-06-02 -Effluent Monitor Values for R EALs RGl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RG2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level cannot be restored to at least (site-specific Level 3 Spent fuel pool level cannot be restored to at least I .5 ft. (Level3) for 60 description) for 60 minutes or longer. minutes or longer. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Spent fuel pool level cannot be restored to at least (site-specific (1) Spent fuel pool level cannot be restored to at least I .5 ft. above the fuel Level 3 value) for 60 minutes or longer. racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS com uter oint A4172 or SF-Ll-2617 (MPCS computer oint A4220 Difference /Justification RG2.1: Site specific information, see V2 SFP Levels Drawing 4 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous radioactiv ity resulting in offsite dose greater than I 00 mrem TEDE or 500 mrem thyroid COE. Difference | |||
/Justification None NEl 99-01Rev6 Seabrook Station Nuclear Power Plant Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. THRESHOLDS Seabrook Station Nuclear Power Plant 5 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (1) (2) (3) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: (site-specific monitor list and threshold values) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid COE at or beyond (site-specific dose receptor point). Field survey results indicate EITHER of the following at or beyond (site-specific dose receptor point): | |||
* Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. | * Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. | ||
* Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation. Difference /Justification (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: Reading ::::: 1 hr > 1 hr to ::::: 2 hrs MSLA 130 mR/hr 100 mR/hr MSLB 130 mR/hr 100 mR/hr MSLC 130 mR/hr 100 mR/hr MSLD 130 mR/hr 100 mR/hr | * Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation. | ||
* With release path to the environment from affected steam line, e.g., open ASDV or SRV, line is faulted, o en steam su2 ly to l-FW-P-37A, etc. (2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundary: Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation. RSl.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for R EALs RSl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 6 ABNORMAL RAD LEVELS I RADIOLOGICAL EFFLUENT ICS/EALS RS2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level at (site-specific Level 3 description). Spent fuel pool level at 1.5 ft. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Lowering of spent fuel pool level to (site-specific Level 3 value). (I) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-Ll-2617 MPCS com uter oint A4220). Difference /Justification RS2.1: Site specific information, see V2 SFP Levels Drawing 7 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous or liquid radioactivity resulting in offsite dose greater than I 0 mrem TEDE or 50 mrem thyroid CDE. Difference /Justification None N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous or liquid | Difference | ||
/Justification (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: Reading ::::: 1 hr > 1 hr to ::::: 2 hrs MSLA 130 mR/hr 100 mR/hr MSLB 130 mR/hr 100 mR/hr MSLC 130 mR/hr 100 mR/hr MSLD 130 mR/hr 100 mR/hr | |||
* With release path to the environment from affected steam line, e.g., open ASDV or SRV, line is faulted, o en steam su2 ly to l-FW-P-37A, etc. (2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundary: | |||
Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation | |||
. RSl.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for R EALs RSl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 6 ABNORMAL RAD LEVELS I RADIOLOGICAL EFFLUENT ICS/EALS RS2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level at (site-specific Level 3 description). | |||
Spent fuel pool level at 1.5 ft. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Lowering of spent fuel pool level to (site-specific Level 3 value). (I) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-Ll-2617 MPCS com uter oint A4220). Difference | |||
/Justification RS2.1: Site specific information, see V2 SFP Levels Drawing 7 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous or liquid radioactivity resulting in offsite dose greater than I 0 mrem TEDE or 50 mrem thyroid CDE. Difference | |||
/Justification None N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous or liquid radioactiv ity resulting in offsite dose greater than I 0 mrem TEDE or 50 mrem thyroid CDE. THRESHOLDS Seabrook Station Nuclear Power Plant 8 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (I) Reading on ANY of the following radiation monitors greater (1) Reading on ANY of the following radiation monitors greater than the reading shown than the reading shown for 15 minutes or longer: for 15 minutes or longer: (site-specific monitor list and threshold values) (2) Dose assessment using actual meteorology indicates doses Monitor !Readin!!s greater than I 0 mrem TEDE or 50 mrem thyroid COE at or RM-6528-4 (WRGM rate) 2.85E+6 uCi/sec beyond (site-specific dose receptor point). (3) Analysis of a liquid effluent sample indicates a concentration RM-6481-1 * (MSL A) 10 mR/hr or release rate that would result in doses greater than 10 mrem RM-6482-1 * (MSL B) 10 mR/hr TEDE or 50 mrem thyroid COE at or beyond (site-specific dose receptor point) for one hour of exposure. RM-6482-2* (MSL C) 10 mR/hr (4) Field survey results indicate EITHER of the following at or RM-6481-2* (MSL D) 10 mR/hr beyond (site-specific dose receptor point): | |||
* With release path to the environment from affected steam line, e.g. o en ASDY or | * With release path to the environment from affected steam line, e.g. o en ASDY or | ||
* Closed window dose rates greater than 10 mR/hr expected SRV, line is faulted, <llien steam supply to I-FW-P-37A, etc. to continue for 60 minutes or longer. | * Closed window dose rates greater than 10 mR/hr expected SRV, line is faulted, <llien steam supply to I-FW-P-37A, etc. to continue for 60 minutes or longer. | ||
* Analyses of field survey samples indicate thyroid CDE (2) Dose assessment using actual meteorology indicates doses greater than 10 mrem greater than 50 mrem for one hour of inhalation. TEDE or 50 mrem thyroid CDE at or beyond the site boundary. (3) Analysis ofa liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure. (4) Field survey results indicate EITHER of the following at or bevond the site boundarv: Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 50 mrem for one hour of inhalation. Difference /Justification RAJ.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for REA Ls RA1.2, 3, 4: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 9 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA2: INITIATING CONDITIONS NEr 99-01 Rev 6 Seabrook Station Nuclear Power Plant Significant lowering of water level above, or damage to, irradiated fuel. Significant lowering of water level above, or damage to, irradiated fuel. Difference /Justification None THRESHOLDS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Uncovery of irradiated fuel in the REFUELING PATHWAY. (1) Un co very of irradiated fuel in the REFUELING PATHWAY. (2) Damage to irradiated fuel resulting in a release of radioactivity from (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by ANY of the following radiation monitors: the fuel as indicated by high-alarm, or reading in excess of the (site-specific listing ofradiation monitors, and the associated current high-alarm setpoint on ANY of the following radiation readings, setpoints and/or alarms) monitors: (3) Lowering of spent fuel pool level to (site-specific Level 2 value). I RM-6518-1, FSB High Range I [See Developer Notes] I RM-6562-1, FSB Vent I I RM-6535A-1, Manip Crane I I RM-65358-1, Manip Crane I (3) Lowering of spent fuel pool level to 12 ft. 3 inches above the fuel racks on SF-Ll-2616 (MPCS computer point A4172 or SF-Ll-2617 MPCS comp_uter oint A4220 . Difference /Justification RA2.l: Site specific information, see V6 Refueling pathway RU2 RA2 RA2.2: Site specific information, see VS UFSAR Table 12.3-14 -CTMT Post-LOCA Range RA2.3: Site specific information, see V2 SFP Levels Drawing 10 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA3: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Radiation levels that impede access to equipment necessary for normal plant Radiation levels that impede access to equipment necessary for normal plant operations, cooldown or shutdown. operations, shutdown or cooldown. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 11 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (I) Dose rate greater than 15 mR/hr in ANY of the following areas: (1) Dose rate greater than 15 mR/hr in ANY of the following areas: | * Analyses of field survey samples indicate thyroid CDE (2) Dose assessment using actual meteorology indicates doses greater than 10 mrem greater than 50 mrem for one hour of inhalation. TEDE or 50 mrem thyroid CDE at or beyond the site boundary. (3) Analysis ofa liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure. (4) Field survey results indicate EITHER of the following at or bevond the site boundarv: Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 50 mrem for one hour of inhalation. Difference | ||
/Justification RAJ.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for REA Ls RA1.2, 3, 4: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 9 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA2: INITIATING CONDITIONS NEr 99-01 Rev 6 Seabrook Station Nuclear Power Plant Significant lowering of water level above, or damage to, irradiated fuel. Significant lowering of water level above, or damage to, irradiated fuel. Difference | |||
/Justification None THRESHOLDS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Uncovery of irradiated fuel in the REFUELING PATHWAY. (1) Un co very of irradiated fuel in the REFUELING PATHWAY. (2) Damage to irradiated fuel resulting in a release of radioactivity from (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by ANY of the following radiation monitors: | |||
the fuel as indicated by high-alarm, or reading in excess of the (site-specific listing ofradiation | |||
: monitors, and the associated current high-alarm setpoint on ANY of the following radiation readings, setpoints and/or alarms) monitors: | |||
(3) Lowering of spent fuel pool level to (site-specific Level 2 value). I RM-6518-1 | |||
, FSB High Range I [See Developer Notes] I RM-6562-1 | |||
, FSB Vent I I RM-6535A-1 | |||
, Manip Crane I I RM-65358-1, Manip Crane I (3) Lowering of spent fuel pool level to 12 ft. 3 inches above the fuel racks on SF-Ll-2616 (MPCS computer point A4172 or SF-Ll-2617 MPCS comp_uter oint A4220 . Difference | |||
/Justification RA2.l: Site specific information | |||
, see V6 Refueling pathway RU2 RA2 RA2.2: Site specific information | |||
, see VS UFSAR Table 12.3-14 -CTMT Post-LOCA Range RA2.3: Site specific information, see V2 SFP Levels Drawing 10 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA3: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Radiation levels that impede access to equipment necessary for normal plant Radiation levels that impede access to equipment necessary for normal plant operations | |||
, cooldown or shutdown. operations | |||
, shutdown or cooldown. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 11 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (I) Dose rate greater than 15 mR/hr in ANY of the following areas: (1) Dose rate greater than 15 mR/hr in ANY of the following areas: | |||
* Control Room I Control Room I | * Control Room I Control Room I | ||
* Central Alarm Station I Central Alarm Station (CAS) by survey I * (other site-specific areas/rooms) I Secondary Alarm Station (SAS) by survey I (2) An UNPLANNED event results in radiation levels that prohibit or impede access to any of the following plant rooms or areas: (2) An UNPLANNED event results in radiation levels that prohibit or (site-specific list of plant rooms or areas with entry-related mode IMPEDE access to any of the following plant rooms or areas: applicability identified) [_able HI Area Mode rrimary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation -26 ft elevation ffurbine Building 21 ft elevatio 1, 2, 3 50 ft elevation Essential Switchgear Rooms Essential 1, 2, 3, 4 !>Jen essentiE!] Steam anEi FeeEiwater l. I,'.!.]. ' "Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation ;i l ft | * Central Alarm Station I Central Alarm Station (CAS) by survey I * (other site-specific areas/rooms) I Secondary Alarm Station (SAS) by survey I (2) An UNPLANNED event results in radiation levels that prohibit or impede access to any of the following plant rooms or areas: (2) An UNPLANNED event results in radiation levels that prohibit or (site-specific list of plant rooms or areas with entry-related mode IMPEDE access to any of the following plant rooms or areas: applicability identified) [_able HI Area Mode rrimary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation | ||
-26 ft elevation ffurbine Building 21 ft elevatio 1, 2, 3 50 ft elevation Essential Switchgear Rooms Essential 1, 2, 3, 4 !>Jen essentiE!] Steam anEi FeeEiwater | |||
: l. I,'.!.]. ' "Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation ;i l ft Containmen t G,4 RHR/CBS Equipment Vaults 3,4 Difference | |||
/Justification Table Hl: Site specific information, see V7 -Table Hl Procedure References 12 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS RUl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous or liquid radioactivity greater than 2 times the (site-specific Release of gaseous or liquid radioactivity greater than 2 times the effluent release controlling document) limits for 60 minutes or longer. ODCM limits for 60 minutes or longer. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 13 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS (1) Reading on ANY effluent radiation monitor greater than 2 times the (site-I) a. Valid R:reading on ANY non isolated of the following specific effluent release controlling document) limits for 60 minutes or effluent ratJt radiation monitors greater than 2 times the longer: ODCM limits value of the current high-alarm setpoint for 60 (site-specifi c monitor list and threshold values corresponding to 2 times the minutes or longer: controlling document limits) I RM-6509-1 (WTT Disch) I (2) Reading on ANY effluent radiation monitor greater than 2 times the alarm I RM-6521-1 (TB Sump) I setpoint established by a current radioactivity discharge permit for 60 minutes I RM-6519-1 SG I or longer. (3) Sample analysis for a gaseous or liquid release indicates a concentration or Blowdown) release rate greater than 2 times the (site-specific effluent release controlling 1 r-6473-1 (WT LI I document) limits for 60 minutes or longer. FF) I RM-6528-4 (WRGM rate) I AND b. The discharge flow to the environment is not isolated within 60 minutes Reading on AN¥ effhient rndiation monitoF gFeateF than 2 times the a)aFm setj3oint estae)ished ey R eHFFent Fadioaeti | |||
... diseharge JJermit for 60 minutes OF longer. OR analysis for a gaseous or liquid release indicates a I concentration or release rate greater than 2 times the ODCM limits for 60 minutes or longer. 2) I Difference /Justification: EAL RU1(2) deleted because it is redundant to EAL RUl(l) RUl.1: Site specific information | |||
, see VS 012_Table 03-15 -UFSAR WRGM Ranges and V32 UFSAR Table 11.5-1 14 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS RU2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLA ED loss of water level above irradiated fuel. UNPLANNED loss of water level above irradiated fuel. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) a. UNPLANNED water level drop in the REFUELING (I) a. UNPLANNED water level drop in the REFUELTNG PATHWAY as PATHWAY as indicated by ANY of the following: | |||
indicated by ANY of the following: | |||
(site-specific level indications). | |||
I 1-SF-Ll-2607 (Spent Fuel Pool Level) I AND I 1-SF-Ll-2629 or 1-SF-LIT-2629-1 (Reactor Refuel Cavity Level) I b. UNPLANNED rise in area radiation levels as indicated by AND ANY of the following radiation monitors. | |||
: b. UNPLANNED rise in area radiation levels as indicated by ANY of (site-specific list of area radiation monitors) the following radiation monitors: I RM-6535-A-1 | |||
, Containment Manipulator Crane I I RM-6535-B-1, Containment Manipulator Crane I I BM-6549-1, FSB Spent Fuel Range Low I I RM-6518-1, FSB Spent Fuel Range Hi I Difference | |||
/Justification CGJ.la: Site specific information | |||
, see Y9-SFP level CGl.lb: Site specific information | |||
, see YlO UFSAR Table 12.3-14-CTMT Post-LOCA Range 15 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CGl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory affecting fuel Loss of reactor vessel/RCS inventory affecting fuel clad integrity with clad integrity with containment challenged. containment challenged. Difference | |||
/Justification None THRESHOLDS NEJ 99-01 Rev 6 Seabrook Station Nuclear Power Plant 16 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS (1) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than (1) a. VLIS Full Range< 55% -141.5 inl for 30 minutes or (site-specific level) for 30 minutes or longer. longer. AND AND b. ANY indication from the Containment Challenge Table (see b. ANY indication from the Containment Challenge Table C2. below). (2) a. Reactor vessel/RCS level cannot be monitored for 30 minutes or (2) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be longer. monitored for 30 minutes or longer. AND AND b. Core uncoverv is indicated by ANY of the following: b. Core uncovery is indicated by ANY of the following: I (Manipulator Crane) reading greater than 9500 mR/hr * (Site-specific radiation monitor) reading greater than (site-(Manipulator Crane) reading greater than 9500 mR/hr specific value) Erratic source range monitor indication | |||
* Erratic source range monitor indication [PWR] | * Erratic source range monitor indication [PWR] | ||
* UNPLANNED increase in (site-specific sump and/or tank) UNPLANNED increase in Containment Sum s A or B levels of levels of sufficient magnitude to indicate core uncovery sufficient magnitude to indicate core uncovery. * (Other site-specific indications) Visual observation . AND AND c. ANY indication from the Containment Challenge Table (see c. ANY indication from the Containment Challenge [fable C2J. below). Containment Challenge Table C2 Containment Challenge Table | * UNPLANNED increase in (site-specific sump and/or tank) UNPLANNED increase in Containment Sum s A or B levels of levels of sufficient magnitude to indicate core uncovery sufficient magnitude to indicate core uncovery. * (Other site-specific indications) Visual observation . AND AND c. ANY indication from the Containment Challenge Table (see c. ANY indication from the Containment Challenge [fable C2J. below). Containment Challenge Table C2 Containment Challenge Table | ||
Line 175: | Line 1,325: | ||
* UNPLANNED increase in containment pressure *If CONTAINMENT CLOSURE is re-established prior to exceeding | * UNPLANNED increase in containment pressure *If CONTAINMENT CLOSURE is re-established prior to exceeding | ||
* Secondary containment radiation monitor reading above (site-the 30-minute time limit, then declaration of a General Emergency is specific value) fBWRl not required. | * Secondary containment radiation monitor reading above (site-the 30-minute time limit, then declaration of a General Emergency is specific value) fBWRl not required. | ||
* lfCONTAINME T CLOSURE is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. Difference /Justification CGl.la: Site specific information, see Vll EPCALC-06-04 -RVLIS Values CG1.2b: Site specific information, see V 10 UFSAR Table 12.3-14 -Manipulator Crane Monitor Range and V 13 Containment Sumps CG1.2c: Site specific information, see V 14 H2 concentration in containment 17 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory affecting core Loss of reactor vessel/RCS inventory affecting core decay heat removal decay heat removal capability. capability. Difference /Justification None THRESHOLDS N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) a. co TArNME T CLOSURE not established. (I) a. CONTAINMENT CLOSURE not established. AND AND b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than b. YLIS Full Range<63% -101.9 in. (site-specific level). (2) a. CONTAINMENT CLOSURE established. (2) a. co TArNMENT CLOSURE established. AND AND b. VLIS Full Range<55% -141.5 in. b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than (3) a. Reactor vessel/RCS level cannot be monitored for 30 minutes or (site-specific level). longer. (3) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be AND monitored for 30 minutes or longer. b. Core uncovery is indicated by ANY of the following: AND [RM-6535A-l (Manipulator Crane) reading greater than 9500 mR/hr b. Core uncovery is indicated by ANY of the following: [RM-65358-1 (Manipulator Crane) reading greater than 9500 mR/hr * (Site-specific radiation monitor) reading greater than 'Erratic source range monitor indication (site-specific value) | * lfCONTAINME T CLOSURE is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. Difference /Justification CGl.la: Site specific information, see Vll EPCALC-06-04 -RVLIS Values CG1.2b: Site specific information, see V 10 UFSAR Table 12.3-14 -Manipulator Crane Monitor Range and V 13 Containment Sumps CG1.2c: Site specific information, see V 14 H2 concentration in containment 17 COLD SHUTDOWN/ | ||
REFUELING SYSTEM MALFUNCTION ICS/EALS CSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory affecting core Loss of reactor vessel/RCS inventory affecting core decay heat removal decay heat removal capability | |||
. capability. Difference /Justification None THRESHOLDS N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) a. co TArNME T CLOSURE not established. (I) a. CONTAINMENT CLOSURE not established. AND AND b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than b. YLIS Full Range<63% -101.9 in. (site-specific level). (2) a. CONTAINMENT CLOSURE established. (2) a. co TArNMENT CLOSURE established. AND AND b. VLIS Full Range<55% -141.5 in. b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than (3) a. Reactor vessel/RCS level cannot be monitored for 30 minutes or (site-specific level). longer. (3) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be AND monitored for 30 minutes or longer. b. Core uncovery is indicated by ANY of the following: AND [RM-6535A-l (Manipulator Crane) reading greater than 9500 mR/hr b. Core uncovery is indicated by ANY of the following: [RM-65358-1 (Manipulator Crane) reading greater than 9500 mR/hr * (Site-specific radiation monitor) reading greater than 'Erratic source range monitor indication (site-specific value) | |||
* Erratic source range monitor indication [PWR] UNPLANNED increase in Containment Sum s A or B levels of | * Erratic source range monitor indication [PWR] UNPLANNED increase in Containment Sum s A or B levels of | ||
* UNPLA ED increase in (site-specific sump and/or sufficient magnitude to indicate core uncovery. tank) levels of sufficient magnitude to indicate core 'VTSual observation. uncovery * (Other site-specific indications) Difference /Justification 18 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CSl.lb & CSl.2b: Site specific information, see Vl 1 EPCALC-06-04 -RVL!S Values CSJ.3b: Site specific information, see V 12 UFSAR Table 12.3-14 -CTMT Post-LOCA Range and V 13 Containment Sumps 19 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of( | * UNPLA ED increase in (site-specific sump and/or sufficient magnitude to indicate core uncovery. tank) levels of sufficient magnitude to indicate core 'VTSual observation. uncovery * (Other site-specific indications) Difference /Justification 18 COLD SHUTDOWN/ | ||
REFUELING SYSTEM MALFUNCTION ICS/EALS CSl.lb & CSl.2b: Site specific information, see Vl 1 EPCALC-06-04 -RVL!S Values CSJ.3b: Site specific information | |||
, see V 12 UFSAR Table 12.3-14 -CTMT Post-LOCA Range and V 13 Containment Sumps 19 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactorvess el/RCS [PWR] or RPY [BWR]) inventory. | |||
Loss of reactor vessel/RCS inventory Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory as (I Loss of reactor vessel/RCS inventory as indicated by YLIS full range indicated by level less than (site-specific level). < 64% -96.9 in . (2) a. (Reactor vessel/RCS | |||
[PWR] or RPY [BWR]) level cannot be (2) a. Reactor vessel/RCS level cannot be monitored for 15 minutes or monitored for 15 minutes or longer longer. AND AND b. UNPLA ED increase in (site-specific sump and/or tank) b. UNPLANNED increase in Containment Sumps A or B levels due levels due to a loss of (reactor vessel/RCS [PWR] or RPV to a loss of reactor vessel/RCS inventory. | |||
[BWR]) inventory. | |||
Difference | |||
/Justification CAJ.lb: Site specific information, see Vl I EPCALC-06 RYLIS Values CAJ.2b: Site specific information, see Vl3 Containment Sumps 20 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CA2: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of all offsite and all onsite AC power to emergency buses for 15 minutes Loss of all offsite and all onsite AC power to emergency buses for 15 or longer. minutes or longer. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (!) Loss of ALL offsite and ALL onsite AC Power to (site-specific OTE: For a bus to be considered energized from SEPS, both SEPS diesel emergency buses) for 15 minutes or longer. generator sets must be functional. (1) Loss of ALL offsite and ALL onsite AC Power to BOTH AC emergency buses 5 AND E6 for 15 minutes or longer. Difference | |||
/Justification Added NOTE for consideration of an additional non-safety power supply Supplemental Emergency Power System (SEPS) 21 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CA3: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Inability to maintain the plant in cold shutdown. Inability to maintain the plant in cold shutdown. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) UNPLANNED increase in RCS temperature to greater than (site-(1) UNPLANNED increase in RCS temperature to greater than 200° F for specific Technical Specification cold shutdown temperature limit) greater than the duration specified in the following table. for greater than the duration specified in the following table. Table CJ -RCS Heat-up Duration Thresholds Table: RCS l-lcat-up Duration Thresholds CONTAINMENT Containment Closure Heat-up RCS Status Heat-up Durntion RCS Status Status Duration CLOSURE Status Intact (but not at reduced Not applicable 60 minutes* INT ACT and reactor inventory rPWRl) Not applicable 60 minutes* Not intact (or at reduced Established 20 minutes* vessel ;::: -36 inches inventory rPWRl) Not Established 0 minutes Not INT ACT or reactor Established 20 minutes* | |||
* If an RCS heat removal system is in operation within this time frame and vessel < -36 inches Not Established 0 minutes RCS temoerature is being reduced, the EAL is not aoolicable. | * If an RCS heat removal system is in operation within this time frame and vessel < -36 inches Not Established 0 minutes RCS temoerature is being reduced, the EAL is not aoolicable. | ||
* lfRHR is in operation within this time frame and RCS temperature is (2) UNPLANNED RCS pressure increase greater than (site-specific being reduced, the EAL is not applicable. pressure reading). (This EAL does not apply during water-solid plant conditions. [PWR]) (2) UNPLANNED RCS pressure increase greater than Q5 sig. (This EAL does not apply during water-solid plant conditions.) Difference /Justification CA3.J: Site specific information, see V 15 Cold SD Temp Limit TS and V 16 -Reduced Inventory CA3.2: Site specific information, see Vl 7 RCS Pressure range 22 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CA6: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Hazardous event affecting a SAFETY SYSTEM needed for the current Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. operating mode. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) a. The occurrence of ANY of the following hazardous events: (I) a. The occurrence of ANY of the following hazardous events: | * lfRHR is in operation within this time frame and RCS temperature is (2) UNPLANNED RCS pressure increase greater than (site-specific being reduced, the EAL is not applicable. pressure reading). (This EAL does not apply during water-solid plant conditions. [PWR]) (2) UNPLANNED RCS pressure increase greater than Q5 sig. (This EAL does not apply during water-solid plant conditions | ||
* Seismic event (earthquake) I Seismic event (earthquake) I | .) Difference | ||
/Justification CA3.J: Site specific information | |||
, see V 15 Cold SD Temp Limit TS and V 16 -Reduced Inventory CA3.2: Site specific information | |||
, see Vl 7 RCS Pressure range 22 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CA6: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Hazardous event affecting a SAFETY SYSTEM needed for the current Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. operating mode. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) a. The occurrence of ANY of the following hazardous events: (I) a. The occurrence of ANY of the following hazardous events: | |||
* Seismic event (earthquake) | |||
I Seismic event (earthquake) | |||
I | |||
* Internal or external flooding event I Internal or external flooding event I | * Internal or external flooding event I Internal or external flooding event I | ||
* High winds or tornado strike J High winds or tornado strike I | * High winds or tornado strike J High winds or tornado strike I | ||
* Fl RE I FIRE I | * Fl RE I FIRE I | ||
* EXPLOSION * (site-specific hazards) I EXPLOSION I | * EXPLOSION * (site-specific hazards) I EXPLOSION I | ||
* Other events with similar hazard characteristics as I Other events with similar hazard characteristics as determined by I determined by the Shift Manager the Shift Manager AND AND b. EITHER of the following: b. EITHER of the following: I. Event damage has caused indications of degraded I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. needed for the current operating mode. OR OR 2. The event has caused VISIBLE DAMAGE to a SAFETY 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current SYSTEM component or structure needed for the current operating mode. operating mode. Difference /Justification 23 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS None 24 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CUl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. for 15 minutes or longer. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) UNPLANNED loss of reactor coolant results in (reactor vessel/RCS (1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level [PWR] or RPV [BWR]) level less than a required lower limit for 15 less than a required lower limit of an operating band, specified by an minutes or longer. operating procedure for 15 minutes or longer. (2) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be monitored. (2) a. Reactor vessel/RCS level cannot be monitored. AND AND b. UNPLANNED increase in (site-specific sump and/or tank) b. UNPLANNED increase in Containment Sump A or B level. levels. Difference /Justification CUl.2b: Site specific information, see V13 Containment Sumps 25 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS I CU2: INITIATING CONDITIONS 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loh of all but one AC power source to emergency buses for 15 minutes or longer. Loss of all but one AC power source to emergency buses for 15 minutes or longer. Di(ference /Justification Nope I THRESHOLDS 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) fr: AC power capability to (site-specific emergency buses) is reduced to a ote: For power restoration from the SEPS, both SEPS diesel generator sets single power source for 15 minutes or longer. must be functional. AND 1) a. AC power capability to QTH AC emergency buses SA D b. Any additional single power source failure will result in loss of all AC 6 is reduced to a single power source for 15 minutes or longer. power to SAFETY SYSTEMS. --AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. -om frhere are six power sources to consider: 345 kV offsite power Line 369 . 345 kV offsite power Line 363 . 345 kV offsite power Line 394 . Emergency Diesel Generator A . Emergency Diesel Generator B . SEPS. For SEPS to be considered available both SEPS diesel generator sets must be functional. -Difference /Justification NOTE to clarify that both SEPS constitute a single power source. Added NOTE containing table of AC power sources per EPFAQ 2015-15. 26 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS 27 l COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS CU3: INITIATING CONDITIONS N EI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED increase in RCS temperature. UNPLANNED increase in RCS temperature. Difference /Justification None THRESHOLDS NET 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) UNPLANNED increase in RCS temperature to greater than (site-(I) UNPLANNED increase in RCS temperature to greater than !200° F. specific Technical Specification cold shutdown temperature limit). (!2) Loss of ALL RCS temperature and reactor vessel/RCS level* indication (!2) Loss of ALL RCS | * Other events with similar hazard characteristics as I Other events with similar hazard characteristics as determined by I determined by the Shift Manager the Shift Manager AND AND b. EITHER of the following: b. EITHER of the following: | ||
I. Event damage has caused indications of degraded I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. needed for the current operating mode. OR OR 2. The event has caused VISIBLE DAMAGE to a SAFETY 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current SYSTEM component or structure needed for the current operating mode. operating mode. Difference | |||
/Justification 23 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS None 24 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CUl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. for 15 minutes or longer. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) UNPLANNED loss of reactor coolant results in (reactor vessel/RCS (1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level [PWR] or RPV [BWR]) level less than a required lower limit for 15 less than a required lower limit of an operating band, specified by an minutes or longer. operating procedure for 15 minutes or longer. (2) a. (Reactor vessel/RCS | |||
[PWR] or RPV [BWR]) level cannot be monitored. | |||
(2) a. Reactor vessel/RCS level cannot be monitored. AND AND b. UNPLANNED increase in (site-specific sump and/or tank) b. UNPLANNED increase in Containment Sump A or B level. levels. Difference | |||
/Justification CUl.2b: Site specific information, see V13 Containment Sumps 25 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS I CU2: INITIATING CONDITIONS 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loh of all but one AC power source to emergency buses for 15 minutes or longer. Loss of all but one AC power source to emergency buses for 15 minutes or longer. Di(ference | |||
/Justification Nope I THRESHOLDS 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) fr: AC power capability to (site-specific emergency buses) is reduced to a ote: For power restoration from the SEPS, both SEPS diesel generator sets single power source for 15 minutes or longer. must be functional. AND 1) a. AC power capability to QTH AC emergency buses SA D b. Any additional single power source failure will result in loss of all AC 6 is reduced to a single power source for 15 minutes or longer. power to SAFETY SYSTEMS. --AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS. | |||
-om frhere are six power sources to consider: | |||
345 kV offsite power Line 369 . 345 kV offsite power Line 363 . 345 kV offsite power Line 394 . Emergency Diesel Generator A . Emergency Diesel Generator B . SEPS. For SEPS to be considered available both SEPS diesel generator sets must be functional. | |||
-Difference | |||
/Justification NOTE to clarify that both SEPS constitute a single power source. Added NOTE containing table of AC power sources per EPFAQ 2015-15. 26 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS 27 l COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CU3: INITIATING CONDITIONS N EI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED increase in RCS temperature. UNPLANNED increase in RCS temperature | |||
. Difference | |||
/Justification None THRESHOLDS NET 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) UNPLANNED increase in RCS temperature to greater than (site-(I) UNPLANNED increase in RCS temperature to greater than !200° F. specific Technical Specification cold shutdown temperature limit). (!2) Loss of ALL RCS temperature and reactor vessel/RCS level* indication | |||
(!2) Loss of ALL RCS temperatur e and (reactor vessel/RCS [PWR] or for 15 minutes or longer. RPV [BWR]) level indication for 15 minutes or longer. Difference | |||
/Justification CU3.1: Site specific information | |||
, see V15 Cold SD Temp Limit TS 28 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CU4: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of Vital DC power for 15 minutes or longer. Loss of Vital DC power for 15 minutes or longer. Difference | |||
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Indicated voltage is less than (site-specific bus voltage value) on (I) Indicated voltage is less than I 05V on required Vital DC buses required Vital DC buses for 15 minutes or longer. associated with the Protected Train for 15 minutes or longer. I TrainA-llAand llQ I I ifrain B -11 B and 11 D I Difference | |||
/Justification CU4.1: Site specific information, see Vl8 UFSAR 8.3.2 -DCV 105 limit 29 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS CVS: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of all onsite or offsite communications capabilities. Loss of all on site or offsite communications capabilities. Difference | |||
/Justification None THRESHOLDS NET 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Loss of ALL of the following onsite communication methods: (1) Loss of ALL of the following onsite communication methods: (site-specific list of communications methods) | |||
I (PB)Q Telephones I (2) Loss of ALL of the following ORO communications methods: | |||
I Gai-Tronics I (site-spec ific list of communications methods) I !"l_<l_nt Radio System I (3) Loss of ALL of the following NRC communications methods: (site-specific list of communications methods) (2) Loss of ALL of the following ORO communications methods: I Alert System Ll'JASJ I I Backup NAS I I Afl. Control Room/TSC telephones I I GelltilaF tele13hsAes I (3) Loss of ALL of the following NRC communications methods: | |||
I Notification System (ENS) I I All plant telephones I I ,FTS telephones in the TSq I I Gellt1laF I Difference | |||
/Justification Provided site specific communication s methods 30 COLD SHUTDOWN/ | |||
REFUELING SYSTEM MALFUNCTION ICS/EALS 31 Seabrook Station Nuclear Power Plant FG I -Loss of any two barriers and Loss or FSl -Loss or Potential Loss of any two barriers. FAI -Any Loss or any Potential Loss of either the Fuel Potential Loss of the third barrier. Clad or RCS barrier. Difference | |||
/Justification None Fuel Clad Barrier RCS Barrier Containment Barrier Loss Potential Loss Loss Potential Loss Loss Potential Loss NEI 99-01 Rev 6 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage Not Applicable A. RCS/reactor A. An automatic or A. Operation of a standby A. A leaking or Not Applicable vessel level less manual ECCS (SI) charging (makeup) RUPTURED SG is than (site-specific actuation is required pump is required by FAUL TED outside of level). by EITHER of the EITHER of the containment. following: following: | |||
* UNI SO LAB LE I. UNISOLABLE RCS leakage RCS leakage OR OR | * UNI SO LAB LE I. UNISOLABLE RCS leakage RCS leakage OR OR | ||
* SG tube 2. SG tube leakage. RUPTURE. OR FISSION PRODUCT BARRIER ICS/EALS B. RCS cooldown rate greater than (site-specific pressurized thermal shock criteria/limits defined by site-specific indications). Seabrook Station Nuclear Power Plant ot Applicable A. Core Cooling A. An automatic or A. Operation of a second A. A leaking or Not Applicable (C) CSF-ORANGE manual SI actuation is charging pump in the RUPTURED SG is entry conditions required by EITHER of normal charging mode FAUL TED outside of I (NOTE 1 the following: is required by EITHER containment. | * SG tube 2. SG tube leakage. RUPTURE. OR FISSION PRODUCT BARRIER ICS/EALS B. RCS cooldown rate greater than (site-specific pressurized thermal shock criteria/limits defined by site-specific indications). Seabrook Station Nuclear Power Plant ot Applicable A. Core Cooling A. An automatic or A. Operation of a second A. A leaking or Not Applicable (C) CSF-ORANGE manual SI actuation is charging pump in the RUPTURED SG is entry conditions required by EITHER of normal charging mode FAUL TED outside of I (NOTE 1 the following: is required by EITHER containment. | ||
* UNTSOLABLE of the following: RCS leakage 1. UNISOLABLE OR RCS leakage | * UNTSOLABLE of the following: | ||
* SG tube RUPTURE. OR 2. SG tube leakage. OR B. CS Integrity (P) CSF -RED entry | RCS leakage 1. UNISOLABLE OR RCS leakage | ||
* SG tube RUPTURE. | |||
OR 2. SG tube leakage. OR B. CS Integrity (P) CSF -RED entry condition s I met with RCS press > psig. OTE 1) Difference | |||
/Justification Fuel Clad Barrier Potential Loss 1.A: Site specific information, see Y20 CSFST Core Cooling RCS Barrier Potential Loss 1.B: Site specific information, see V21 CSFST Integrity 34 FISSION PRODUCT BARRIER ICS/EALS NEJ 99-01 Rev 6 2. Inadequate Heat Removal 2. Inadequate Heat Removal 2. Inadequate Heat Removal A. aore exit A. Core exit Not Applicable A. Inadequate RCS heat Not Applicable A. 1. (Site-specific ermocouple thermocouple removal capability via criteria for readings greater readings greater steam generators as entry into core than (site-specific than (site-specific indicated by (site-cooling temperature temperature specific indications). restoration r) value). procedure) OR AND B. Inadequate RCS 2. Restoration heat removal capability via procedure not effective within steam generators 15 minutes. | |||
as indicated by (site-specific I indications). Seabrook Station Nuclear Power Plant A. Core Cooling (C) A. Core Cooling (C) Not Applicable A. eat Sink (H) CSF -Not Applicable A. Core Cooling (C) CSF -RED entry CSF-ORANGE ED entry conditions CSF -RED entry t"d;1;00, mot entry conditions met. OTEl conditions met for OTE I} net. OTE I) 15 minutes or OR longer. OTE 1 B. eat Sink (H) CSF -RED entry conditions met. I OTE 1) Difference | |||
/Justificat ion Fuel Clad Barrier: | |||
Loss 2.A, Potential Loss 2.A and Containment Barrier Potential Loss 2.A: Site specific information | |||
, see Y20 CSFST Core Cooling RCS Barrier: | |||
Potential Loss 2.A: Site specific information | |||
, see Y22 CSFST Heat Sink 35 FISSION PRODUCT BARRIER ICS/EALS NET 99-01 Rev 6 3. RCS Activity I Containment Radiation | |||
: 3. RCS Activity I Containment Radiation | |||
: 3. RCS Activity I Containment Radiation A. Containment ot Applicable A. Containment radiation Not Applicable ot Applicable A. Containment radiation monitor monitor reading radiation monitor reading greater greater than (site-reading greater than than (site-specific specific value). (site-specific value). value). OR 8. (Site-specific indications that reactor coolant activity is greater than 300 µCi/gm dose equivalent I-131). Seabrook Station Nuclear Power Plant A. Post LOCA Not Applicable A. Post LOCA Radiation Not Applicable Not Applicable A. Post LOCA Radiation onitors Radiation Monitors Monitors M 6576A-I or RM M 6576A-1 or RM RM 6576A-l or 65768-1 65768-1 65768-1 :::: 16 R/hr. ".'._ 1,305 R/hr. -95 R/hr. OR 8. RCS activity | |||
> BOO uCi/gm Dose -quivalent I 131 as determined per rocedure CS0925.0I, eactor Coolan Post Accident Sampling. 36 L FISSION PRODUCT BARRIER ICS/EALS Difference | |||
/Justification All Barriers: Loss & Potential Loss 3.A: Site specific information | |||
, see V23 EPCALC-06-0 I -Rad Values for Fission Product Barrier Matrix NEI 99-01 Rev 6 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass ot Applicable Not Applicable Not Applicable Not Applicable A. Containment isolation is A. Containment required pressure greater than AND (site-specific value) EITHER of the OR following: | |||
B. Explosive mixture 1. Containment exists inside integrity has been containment lost based on OR Emergency c. I. Containment Director udgment. | |||
pressure greater OR than (site-2. UNISOLABLE specific pressure pathway from the setpoint) containment to the AND environme nt exists. 2. Less than one OR full train of B. Indications of RCS (site-specific leakage outside of system or containment. | |||
equipment) is operating per design for 15 minutes or longer. Seabrook Station Nuclear Power Plant 37}} |
Revision as of 01:27, 30 June 2018
ML16358A446 | |
Person / Time | |
---|---|
Site: | Seabrook ![]() |
Issue date: | 12/15/2016 |
From: | McCartney E NextEra Energy Seabrook |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
SBK-L-16196 | |
Download: ML16358A446 (166) | |
Text
U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 Seabrook Station NEXTera SEABROOK December 15, 2016 10 CFR 50.90 SBK-L-16196 Docket No. 50-443 Response to Request for Supplemental Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors"
References:
- 1. NextEra Energy Seabrook, LLC letter SBK-L-15120, "License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6 'Development of Emergency Action Levels for Non-Passive Reactors"'
February 27, 2016(ML16068A128)
- 2. NRC letter "Seabrook
- Station, Unit No. 1 -Request for Additional Information Related to License Amendment Request to Adopt Emergency Action Level Schemes Pursuant to NE! 99-01, Revision 6 (CAC MF7439),"
September 22, 2016(ML16230A533)
- 3. NextEra Energy Seabrook, LLC letter SBK-L-16162, "Response to Request for Additional Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors",
October 27, 2016(ML16302A414)
- 4. NRC e-mail "Need for Supplement to EAL license amendment" November 10, 2016 (ML 16319A421)
In Reference 1 and supplemented by Reference 3, NextEra Energy Seabrook, LLC (NextEra) submitted a license amendment request (LAR) to revise the current EAL scheme to one based upon the Nuclear Energy Institute (NEI) document NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors".
In Reference 4, based on a teleconference held on November 7, 2016 to clarify NextEra's responses in Reference 3, the NRC staff requested that NextEra provide clarifications related to the responses provided for RAl-Seabrook-3 and RAl-Seabrook-5 in Reference
- 3. Additionally, in order to provide a clear licensing basis for the staff to reference, the NRC has requested a NextEra Energy Seabrook, LLC PO Box 300, Seabrook, NH 03874 l U.S. Nuclear Regulatory Commission SBK-L-16196/
Page 2 clean version of the EALs be provided in this supplement.
Enclosure 1 to this letter supplements NextEra's responses to RAl-Seabrook-3 and RAl-Seabrook-5.
Enclosure 2 provides a markup of the proposed emergency action level revised with this supplement, which supersedes the corresponding markup in Reference
- 1. Enclosure 3 includes a clean copy of the Seabrook Station Emergency Action Levels-Initiating Conditions, Threshold Values, and Basis, and Enclosure 4 contains the table of NEI 99-01, Rev. 6, Deviations and Differences.
This supplement to LAR 15-02 does not alter the conclusion in Reference 1 that the changes do not involve a significant hazards consideration pursuant to 10 CFR 50.92, and there are no significant environmental impacts associated with the changes.
No new or revised commitments are included in this letter. Should you have any questions regarding this letter, please contact Mr. Kenneth Browne, Licensing
- Manager, at (603) 773-7932.
I declare under penalty of perjury that the foregoing is true and correct.
Executed on December 15 , 2016. Sincerely, Eric McCartney Site Vice President NextEra Energy Seabrook, LLC Enclosures cc: NRC Region I Administrator NRC Project Manager NRC Senior Resident Inspector Director Homeland Security and Emergency Management New Hampshire Department of Safety Division of Homeland Security and Emergency Management Bureau of Emergency Management 33 Hazen Drive Concord, NH 03305 perry.plummer@dos.nh.gov Mr. John Giarrusso, Jr., Nuclear Preparedness Manager The Commonwealth of Massachusetts Emergency Management Agency 400 Worcester Road Framingham, MA 01702-5399 John. Giarrusso@massmail.state.ma.
us NextEra Energy Seabrook, LLC, P.O. Box 300, Lafayette Road, Seabrook, NH 03874 Enclosure 1 to SBK-L-16196 Response to Request for Supplemental Information Regarding License Amendment Request 15-02, Adoption of Emergency Action Level Schemes Pursuant to NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors" Enclosure 1 to SBK-L-16196 Page 1 of2 Background NextEra Energy Seabrook Station letter dated October 27, 2016 (SBK-L-16162) provided responses to the NRC staff's request for additional information (RAI) related to the license amendment request regarding revising the current EAL scheme to one based upon the Nuclear Energy Institute (NEI) document NEI 99-01, Revision 6, "Development of Emergency Action Levels for Non-Passive Reactors".
On November 7, 2016 NRC staff held a phone call with NextEra staff to discuss the responses to RAls 3 and 5. NRC has requested that the clarifying information be provided to NRC in a supplemental letter. The information below provides the requested supplemental information as discussed during the November 7, 2016 phone call. RAl-Seabrook-3 NRC Follow-up Question During the call the NRC staff clarified that the question was directed towards the equipment's alarm setpoint and its tie to exceeding 2 times a release control limit. The NRC staff requests that NextEra supplement its response, as well as revise the wording in the EAL back to the current wording, as discussed during the call. NextEra Response:
Per discussion during the November 7, 2016, phone call, EAL RU1(1) is revised back to the wording that is currently used for EAL AU1 (1) in the existing Seabrook Station NEI 99-01 Rev. 4 EALs. EAL RU1 (2) [NEI 99-01 Rev. 6 EAL AU1 (2)] is deleted because it is redundant to EAL RU1 (1). This is noted in the table of differences and deviations.
EAL RU1 (3) [NEI 99-01 Rev. 6 EAL AU1 (3)] is re-designated EAL RU1(2) and is retained as written because it differs from the existing Seabrook Station NEI 99-01 Rev. 4 EAL AU1(2) in format only. RAl-Seabrook-5 NRC Follow-up Question:
During the call, NextEra was able to clarify to the NRC staff that both SEPS are required by mentioning specific loading requirements in relation to the capacities of the equipment.
Please include these values as discussed during the call. NextEra Response:
Supplemental emergency power sysem (SEPS) Loading Calculation 9763-3-ED-00-02-F shows that the required load to maintain core cooling is greater than the capacity of one SEPS generator engine (2640 KYV). Abnormal operating procedure OS1246.01, Loss of Offsite Power Plant Shutdown, contains instructions to restore power using SEPS. When SEPS is aligned to an emergency bus, 081246.01 directs checking that the following equipment is loading:
- Service water pump
- Primary component cooling water pump
- Charging pump Enclosure 1 to SBK-L-16196 Page 2 of 2 Calculation 9763-3-ED-00-02-F shows that the base load that is sequenced on once the emergency bus is energized and the sequencer finishes is approximately 1612 't<NV. Calculation 9763 3 ED 00 02 F . d ff th f II . t d I d f th . d . t -----I en 11es e o owing ra e oa s or e require equ1pmen:
LOAD Rated KW Charoinq pump 554 Residual heat removal pump 343 Primary component cooling water pump 549 Service water pump 506 Total equipment load 1952 Total equipment load plus base load 3564 The total load of 3564 'r<JN exceeds the capacity of one SEPS engine. The technical basis for EA Ls MG8, MG 1, MS 1, MA 1 and CA2 is revised to add a sentence following the statement that says, "For power restoration from the SEPS both SEPS diesel generator sets must be functional."
The added sentence says, "Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling."
NRC Additional Request:
In addition, in order to provide a clear licensing basis for the staff to reference both now and, if approved, in the future, please provide a clean version of the EALs in this supplement.
NextEra Response:
Clean version of all the EALs can be found in Enclosure 3-Clean Copy of Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis. A clean version of NEI 99-01, Rev. 6, Deviations and Differences, can be found in Enclosure
- 4.
Enclosure 2 to SBK-L-16196 Markup of Affected Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis RU1 Notification of Unusual Event Initiating Condition:
Release of gaseous or liquid radioactivity greater than 2 times the (site specific effluent release controlling document)
ODCM limits for 60 minutes or longer. Operating Mode Applicability:
All Example Emergency Action Levels: (1 or Notes:
- The Emergency Director STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded.
- If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes.
- If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification u oses. (1) a. VALID R:reading on ANY of the following effluent radiation monitors greater than 2 times the (site specific effluent release controlling document) limits value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WIT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown)
RM-6473-1 (WTLIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes.
(site specific monitor list and threshold values corresponding to 2 times the controlling document limits) (2) Reading on effluent radiation monitor greater than 2 times the alarm setpoint established by a current radioactivity discharge permit for 60 minutes or longer. OR (:'.;-2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the (site specific effluent release controlling document)
ODCM limits for 60 minutes or longer.
Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time (e.g., an uncontrolled release).
It includes any gaseous or liquid radiologica l release, monitoredor un-monitored
, including those for which a radioactivity discharge permit is normally prepared.
Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment.
- Further, there are administrative controls established to prevent unintentional
- releases, and to control and monitor intentional releases.
The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls.
Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiologica l effluent EALs more fully addresses the spectrum of possible accident events and conditions
. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Releases should not be prorated or averaged.
For example, a release exceeding 4 times release limits for 30 minutes does not meet the EAL. EAL #1 -This EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways. EAL #1 addresses radioactivity releases, that for whatever reason, cause effluent radiation monitor readings to exceed two times the ODCM limit and releases are not terminated within 60 minutes.
This alarm setpoint may be associated with a planned batch release, or a continuous release path. In either case, the setpoint is established by the ODCM. Indexing the EAL threshold to the ODCM setpoints in this manner insures that the EAL threshold will never be less than the setpoint established by a specific discharge pennit. The discharge flowpaths associated with RM-6509-1
, 6521-1, 6519-1, and 6473-1 have automatic and manual flow isolation capability
. The EAL wording addresses a situation where a residual source term exists in a discharge flowpath AFTER the flowpath has been isolated, and the associated radiation monitor remains at values above 2 times the value of the current alarm setpoint.
EAL l .b ensures that the Initiating Condition (IC) intent of "to the environment" is met. The 60-minute assessment clock starts at the same time for both EAL l .a and 1.b (i.e., clocks run concurrently)
. There must be a release to the environment (i.e., the flowpath can not be isolated) during the same period that a monitor value is greater than 2 times the value of the current high-alarm setpoint.
EAL #2 This EAL addresses radioactivity releases that cause effluent radiation monitor readings to e>weed 2 times the limit established by a radioactivity discharge permit. This EAL will t)13ically be associated with planned batch releases from non continuous release pathw*ays (e.g., radwaste, waste gas). EAL #?r2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental
- surveys, particularly on unmonitored pathways (e.g., spills of radioactive liquids into storm drains, heat e1whanger leakage in river water systems, etc.). Escalation of the emergency classification level would be via IC RA I.
Enclosure 3 to SBK-L-16196 Clean Copy of Seabrook Station Emergency Action Levels -Initiating Conditions, Threshold Values and Basis SEABROOK STATION EMERGENCY ACTION LEVELS INITIATING CONDITIONS, THRESHOLD VALUES AND BASIS TABLE OF CONTENTS 1 REGULATORY BACKGROUND
...................................................................................
1 1.1 OPERATING REACTORS
..................................................................................................
1 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSl) .....................................
1 1.3 NRC ORDEREA-12-051
................................................................................................
2 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION
...............................................
4 1.5 IC AND EAL MODE APPLICABILITY
..............................................................................
4 1.6 BASIS DOCUMENT
.....................................................................................................
5 1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA
.............................................................................................
6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS
.......................................
7 2.1 GENERAL CONSIDERATIONS
..........................................................................................
7 2.2 CLASSIFICATION METHODOLOGY
.................................................................................
8 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS
..........................................
8 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION
................................
8 2.5 CLASSIFICATION OF IMMINENT CONDITIONS
...............................................................
9 2.6 EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING
...................
9 2.7 CLASSIFICATION OF SHORT-LIVED EVENTS .................................................................
9 2.8 CLASSIFICATION OF TRANSIENT CONDITIONS
............................................................
10 2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION
..............
10 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS
........................
12 4 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS
....................
28 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION
{ISFSI) ICS/EALS
.............
49 6 FISSION PRODUCT BARRIER ICS/EALS
...........
11******u*u*un******n*********nH11HHH*H******
51 7 HAZARDS AND OTHER CONDITIONS AFFECTING PLANT SAFETY ICS/EALS
.........
64 8 SYSTEM MALFUNCTION ICS/EALS
- 11*******************************11*11**11******86 APPENDIX A -ACRONYMS AND ABBREVIATIONS
..........................................................
1 APPENDIX B -DEFINITIONS
- 111****************************11***********************************************
3 ii EMERGENCY ACTION LEVELS 1 REGULATORY BACKGROUND 1.1 OPERATING REACTORS Title 10, Code of Pederal Regulations (CPR), Energy, contains the U.S. Nuclear Regulatory Commission (NRC) regulations that apply to nuclear power facilities.
Several of these regulations govern various aspects of an emergency classification scheme. A review of the relevant sections listed below will aid the reader in understanding the key terminology provided in Section 3.0 of this document.
- 10 CPR§ 50.47(a)(l)(i)
- 10 CPR§ 50.47(b)(4)
- 10 CPR§ 50.54(q)
- 10 CPR§ 50.72(a)
- 10 CPR§ 50, Appendix E, IV.B, Assessment Actions
- 10 CPR§ 50, Appendix E, IV.C, Activation of Emergency Organization The above regulations are supplemented by various regulatory guidance documents.
Three documents of particular relevance to NEI 99-01 are:
- NUREG-0654/FEMA-REP-1, Criteria/or Preparation and Evaluation of Radiological Emergency Response Plans and Preparedness in Support of Nuclear Power Plants, October 1980. [Refer to Appendix 1, Emergency Action Level Guidelines for Nuclear Power Plants]
- NUREG-1022, Event Reporting Guidelines 10 CFR § 5 0. 72 and§ 5 0. 7 3
- Regulatory Guide 1.101, Emergency Response Planning and Preparedness for Nuclear Power Reactors 1.2 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) Selected guidance in NEI 99-01 is applicable to licensees electing to use their 10 CPR 50 emergency plan to fulfill the requirements of 10 CPR 72.32 for a stand-alone ISPSI. The emergency classification levels applicable to an ISPSI are consistent with the requirements of 10 CFR § 50 and the guidance in NUREG 0654/FEMA-REP-l.
The initiating conditions germane to a 10 CFR § 72.32 emergency plan (as described in NUREG-1567) are subsumed within the classification scheme for a 10 CFR § 50.47 emergency plan. The generic ICs and EALs for an ISFSI are presented in Section 5, ISFSI ICs/EALs.
IC EUl covers the spectrum of credible natural and man-made events included within the scope of an ISFSI design. The analysis of potential onsite and off site consequences of accidental releases associated with the operation of an ISFSI is contained in NUREG-1140, A Regulatory Analysis on Emergency Preparedness for Fuel Cycle and Other Radioactive Material Licensees.
NUREG-1140 concluded that the postulated worst-case accident involving an ISFSI has insignificant consequences to public health and safety. This evaluation shows that the 1 maximum offsite dose to a member of the public due to an accidental release of radioactive materials would not exceed 1 rem Effective Dose Equivalent.
1.3 NRC ORDEREA-12-051 The Fukushima Daiichi accident of March 11, 2012, was the result of a tsunami that exceeded the plant's design basis and flooded the site's emergency electrical power supplies and distribution systems.
This caused an extended loss of power that severely compromised the key safety functions of core cooling and containment integrity, and ultimately led to core damage in three reactors.
While the loss of power also impaired the spent fuel pool cooling function, sufficient water inventory was maintained in the pools to preclude fuel damage from the loss of cooling.
Following a review of the Fukushima Daiichi accident, the NRC concluded that several measures were necessary to ensure adequate protection of public health and safety under the provisions of the backfit rule, 10 CFR 50.109(a)(4)(ii).
Among them was to provide each spent fuel pool with reliable level instrumentation to significantly enhance the ability of key decision-makers to allocate resources effectively following a beyond design basis event. To this end, the NRC issued Order EA-12-051, Issuance of Order to Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation, on March 12, 2012, to all US nuclear plants with an operating
- license, construction permit, or combined construction and operating license.
NRC Order EA-12-051 states, in part, "All licensees
... shall have a reliable indication of the water level in associated spent fuel storage pools capable of supporting identification of the following pool water level conditions by trained personnel:
(1) level that is adequate to support operation of the normal fuel pool cooling system, (2) level that is adequate to provide substantial radiation shielding for a person standing on the spent fuel pool operating deck, and (3) level where fuel remains covered and actions to implement make-up water addition should no longer be deferred."
To this end, all licensees must provide:
- A primary and back-up level instrument that will monitor water level from the normal level to the top of the used fuel rack in the pool;
- A display in an area accessible following a severe event; and
- Independent electrical power to each instrument channel and provide an alternate remote power connection capability.
NEI 12-02, Industry Guidance for Compliance with NRC Order EA-12-051, "To Modify Licenses with Regard to Reliable Spent Fuel Pool Instrumentation",
provides guidance for complying with NRC Order EA-12-051.
NEI 99-01, Revision 6, includes three EALs that reflect the availability of the enhanced spent fuel pool level instrumentation associated with NRC Order EA-12-051.
These EALs are included within existing IC RA2, and new ICs RS2 and RG2. Associated EAL notes, bases and developer notes are also provided.
It is recommended that these EALs be implemented when the enhanced spent fuel pool level instrumentation is available for use. 2 The regulatory process that licensees follow to make changes to their emergency plan, including non-scheme changes to EALs, is 10 CFR 50.54(q).
In accordance with this regulation, licensees are responsible for evaluating a proposed change and determining whether or not it results in a reduction in the effectiveness of the plan. As a result of the licensee's determination, the licensee will either make the change or submit it to the NRC for prior review and approval in accordance with 10 CFR 50.90. 3 1.4 ORGANIZATION AND PRESENTATION OF INFORMATION The scheme's information is organized by Recognition Category in the following order.
- R -Abnormal Radiation Levels I Radiological Effluent
- C -Cold Shutdown I Refueling System Malfunction
- E -Independent Spent Fuel Storage Installation (ISFSI)
- F -Fission Product Barrier
- H -Hazards and Other Conditions Affecting Plant Safety
- M -System Malfunction 1.5 IC AND EAL MODE APPLICABILITY The following table shows which Recognition Categories are applicable in each plant mode. The ICs and EALs for a given Recognition Category are applicable in the indicated modes. MODE APPLICABILITY MATRIX Category Mode R c E F H M Power Operations x x x x x Startup x x x x x Hot Standby x x x x x Hot Shutdown x x x x x Cold Shutdown x x x x Refueling x x x x Defueled x x x x 4 MODE 1. Power Operation
- 2. Startup 3. Hot Standby 4. Hot Shutdown
- 5. Cold Shutdown
- 6. Refueling**
NA Defueled Operating Modes Technical Specifications TABLE 1.2 Reactivity
% Rated Thermal Average Coolant Condition, Keff Power* Temperature
- 0.99 >5% 350°F 0.99 .::; 5% 350°F < 0.99 0 350°F < 0.99 0 350 °F > Tavg >200 °F <0.99 0 < 200 °F NA 0 < 140 °F All fuel removed from the reactor vessel (full core offload during refueling or extended outage) *Excluding decay heat. **Fuel in the reactor vessel with the vessel head closure bolts less than fully tensioned or with the head removed.
1.6 BASIS DOCUMENT The basis document is an integral part of an emergency classification scheme. The material in this document supports proper emergency classification decision-making by providing informing background and development information in a readily accessible format. It can be referred to in training situations and when making an actual emergency classification, if necessary.
The document is also useful for establishing configuration management controls for BP-related equipment and explaining an emergency classification to offsite authorities.
The content of the basis document includes:
- A site-specific Mode Applicability Matrix and description of operating modes (see Section 1.5).
- A discussion of the emergency classification and declaration process (see Section 2).
- Each Initiating Condition along with the associated EALs or fission product barrier thresholds, Operating Mode Applicability, Notes and Basis information (see Sections 3-8).
- A listing of acronyms and defined terms (see Appendices A and B, respectively).
A basis section should not contain information that could modify the meaning or intent of the associated IC or EAL. Such information should be incorporated within the IC or EAL statements, or as an EAL Note. Information in the Basis should only clarify and inform decision-making for an emergency classification.
Basis information should be readily available to be referenced, if necessary, by the Short Term Emergency Director/Site Emergency Director (STED/SED).
For example, a copy 5 of the basis document could be maintained in the appropriate emergency response facilities.
Because the information in a basis document can affect emergency classification decision-making (e.g., the STED/SED refers to it during an event), the NRC staff expects that changes to the basis document will be evaluated in accordance with the provisions of 10 CFR 50.54(q).
1.7 EAL/THRESHOLD REFERENCES TO AOP AND EOP SETPOINTS/CRITERIA The criteria/values used in several EALs and fission product barrier thresholds may be drawn from AOPs and EOPs. This approach is intended to maintain good alignment between operational diagnoses and emergency classification assessments.
Appropriate administrative controls are in place to ensure that a subsequent change to an AOP or BOP is screened to determine if an evaluation pursuant to 10 CFR 50.54(q) is required.
6 2 GUIDANCE ON MAKING EMERGENCY CLASSIFICATIONS 2.1 GENERAL CONSIDERATIONS When making an emergency classification, the STED/SED must consider all information having a bearing on the proper assessment of an Initiating Condition (IC). This includes the Emergency Action Level (EAL) plus the associated Operating Mode Applicability, Notes and the informing Basis information.
In the Recognition Category F matrices, EALs are referred to as Fission Product Barrier Thresholds; the thresholds serve the same function as an EAL. NRC regulations require the licensee to establish and maintain the capability to assess, classify, and declare an emergency condition within 15 minutes after the availability of indications to plant operators that an emergency action level has been exceeded and to promptly declare the emergency condition as soon as possible following identification of the appropriate emergency classification level. The NRC staff has provided guidance on implementing this requirement in NSIR/DPR-ISG-01, Interim Staff Guidance, Emergency Planning for Nuclear Power Plants. All emergency classification assessments should be based upon valid indications, reports or conditions.
A valid indication, report, or condition, is one that has been verified through appropriate means such that there is no doubt regarding the indicator's operability, the condition's existence, or the report's accuracy.
For example, validation could be accomplished through an instrument channel check, response on related or redundant indicators, or direct observation by plant personnel.
The validation of indications should be completed in a manner that supports timely emergency declaration.
For ICs and EALs that have a stipulated time duration, the STED/SED should not wait until the applicable time has elapsed, but should declare the event as soon as it is determined that the condition has exceeded, or will likely exceed, the applicable time. If an ongoing radiological release is detected and the release start time is unknown, it should be assumed that the release duration specified in the IC/EAL has been exceeded, absent data to the contrary.
A planned work activity that results in an expected event or condition which meets or exceeds an EAL does not warrant an emergency declaration provided that 1) the activity proceeds as planned and 2) the plant remains within the limits imposed by the operating license.
Such activities include planned work to test, manipulate, repair, maintain or modify a system or component.
In these cases, the controls associated with the planning, preparation and execution of the work will ensure that compliance is maintained with all aspects of the operating license provided that the activity proceeds and concludes as expected.
Events or conditions of this type may be subject to the reporting requirements of 10 § CFR 50.72. The assessment of some EALs is based on the results of analyses that are necessary to ascertain whether a specific EAL threshold has been exceeded; the EAL and/or the associated basis discussion will identify the necessary analysis.
In these cases, the 15-minute declaration period starts with the availability of the analysis results that show the threshold to be exceeded (i.e., this is the time that the EAL information is first available).
7 The NRC expects licensees to establish the capability to initiate and complete related analyses within a reasonable period of time. While the EALs have been developed to address a full spectrum of possible events and conditions which may warrant emergency classification, a provision for classification based on operator/management experience and judgment is still necessary.
The NEI 99-01 scheme provides the STED/SED with the ability to classify events and conditions based upon judgment using EALs that are consistent with the Emergency Classification Level (ECL) definitions (refer to Category H). The STED/SED will need to determine if the effects or consequences of the event or condition reasonably meet or exceed a particular ECL definition.
A similar provision is incorporated into the Fission Product Barrier Tables; judgment may be used to determine the status of a fission product barrier.
2.2 CLASSIFICATION METHODOLOGY To make an emergency classification, the user will compare an event or condition (i.e., the relevant plant indications and reports) to an EAL(s) and determine ifthe EAL has been met or exceeded.
The evaluation of an EAL(s) must be consistent with the related Operating Mode Applicability and Notes. If an EAL has been met or exceeded, then the IC is considered met and the associated ECL is declared in accordance with plant procedures.
When assessing an EAL that specifies a time duration for the off-normal condition, the "clock" for the EAL time duration runs concurrently with the emergency classification process "clock."
For a full discussion of this timing requirement, refer to ISG-01. 2.3 CLASSIFICATION OF MULTIPLE EVENTS AND CONDITIONS When multiple emergency events or conditions are present, the user will identify all met or exceeded EALs. The highest applicable ECL identified during this review is declared.
For example:
There is no "additive" effect from multiple EALs meeting the same ECL. For example:
- If two Alert EALs are met, an Alert should be declared.
Related guidance concerning classification of rapidly escalating events or conditions is provided in Regulatory Issue Summary (RIS) 2007-02, Clarification ofNRC Guidance for Emergency Notifications During Quickly Changing Events. 2.4 CONSIDERATION OF MODE CHANGES DURING CLASSIFICATION The mode in effect at the time that an event or condition
- occurred, and prior to any plant or operator
- response, is the mode that determines whether or not an IC is applicable.
If an event or condition occurs, and results in a mode change before the emergency is declared, the emergency classification level is still based on the mode that existed at the time that the event or condition was initiated (and not when it was declared).
8 2.5 2.6 2.7 Once a different mode is reached, any n ew event or condition, not related to the original classification should be evaluated against the ICs ode at the time of the new event or condition.
event or condition, requiring emergency and EALs applicable to the operating m For events that occur in Cold Shutdown or Refueling, escalation is via EALs that are fueling modes, even if Hot Shutdown (or a higher plant response.
In particular, the fission product nts that initiate in the Hot Shutdown mode or applicable in the Cold Shutdown or Re mode) is entered during the subsequent barrier EALs are applicable only to eve higher. CLASSIFICATION OF IMMINENT CONDI TIO NS Although EALs provide specific thresh olds, the STED/SED must remain alert to events or exceeding an EAL within a relatively short L is IMMINENT).
If, in the judgment of the or conditions that could lead to meeting period of time (i.e., a change in the EC STED/SED, meeting an EAL is I MMINENT, the emergency classification should be made as if the EAL has been met. Whil e applicable to all emergency classification ortant at the higher emergency classification levels, this approach is particularly imp levels since it provides additional time for implementation of protective measures.
EMERGENCY CLASSIFICATION LEVEL UPGRADING AND DOWNGRADING An ECL may be downgraded when the event or condition that meets the highest IC and ecific downgrading requirements are met. If priate, the new ECL would then be based on a EAL no longer exists, and other site-sp downgrading the ECL is deemed appro lower applicable IC(s) and EAL(s). Th e ECL may also simply be terminated.
The following approach to downgradin g or terminating an ECL is recommended.
ECL Unusual Event Alert Site Area Emergency with no long-term plant damage Site Area Emergency with long-term plant damage General Emergency Ter Action When Condition No Longer Exists minate the emergency in accordance with plant edures. proc Dow ngrade or terminate the emergency in rdance with plant procedures.
acco Dow ngrade or terminate the emergency in rdance with plant procedures.
acco Ter minate the emergency and enter recovery in rdance with plant procedures.
acco Ten acco ninate the emergency and enter recovery in rdance with plant procedures.
CLASSIFICATION OF SHORT-LIVED EV ENTS Event-based ICs and EALs define a var iety of specific occurrences that have potential or ture, some of these events may be short-lived and, actual safety significance.
By their na 9 thus, over before the emergency classification assessment can be completed.
If an event occurs that meets or exceeds an EAL, the associated EAL must be declared regardless of its continued presence at the time of declaration.
Examples of such events include a failure of the reactor protection system to automatically scram/trip the reactor followed by a successful manual scram/trip or an earthquake.
2.8 CLASSIFICATION OF TRANSIENT CONDITIONS Many of the ICs and/or EALs contained in this document employ time-based criteria.
These criteria will require that the IC/EAL conditions be present for a defined period of time before an emergency declaration is warranted.
In cases where no time-based criterion is specified, it is recognized that some transient conditions may cause an EAL to be met for a brief period of time. The following guidance should be applied to the classification of these conditions.
EAL momentarily met during expected plant response
-In instances where an EAL is briefly met during an expected (normal) plant response, an emergency declaration is not warranted provided that associated systems and components are operating as expected, and operator actions are performed in accordance with procedures.
EAL momentarily met but the condition is corrected prior to an emergency declaration
-If an operator takes prompt manual action to address a condition, and the action is successful in correcting the condition prior to the emergency declaration, then the applicable EAL is not considered met and the associated emergency declaration is not required.
For illustrative
- purposes, consider the following example.
An ATWS occurs and the auxiliary feedwater system fails to automatically start. Steam generator levels rapidly decrease and the plant enters an inadequate RCS heat removal condition (a potential loss of both the fuel clad and RCS barriers).
If an operator manually starts the'auxiliary feedwater system in accordance with an EOP step and clears the inadequate RCS heat removal condition prior to an emergency declaration, then the classification should be based on the A TWS only. It is important to stress that the 15-minute emergency classification assessment period is not a "grace period" during which a classification may be delayed to allow the performance of a corrective action that would obviate the need to classify the event; emergency classification assessments must be deliberate and timely, with no undue delays. The provision discussed above addresses only those rapidly evolving situations where an operator is able to take a successful corrective action prior to the STED/SED completing the review and steps necessary to make the emergency declaration.
This provision is included to ensure that any public protective actions resulting from the emergency classification are truly warranted by the plant conditions.
2.9 AFTER-THE-FACT DISCOVERY OF AN EMERGENCY EVENT OR CONDITION In some cases, an EAL may be met but the emergency classification was not made at the time of the event or condition.
This situation can occur when personnel discover that an event or condition existed which met an EAL, but no emergency was declared, and the event or condition no longer exists at the time of discovery.
This may be due to the event 10 or condition not being recognized at the time or an error that was made in the emergency classification process.
In these cases, no emergency declaration is warranted;
- however, the guidance contained in NUREG-1022 is applicable.
Specifically, the event should be reported to the NRC in accordance with 10 CFR § 50.72 within one hour of the discovery of the undeclared event or condition.
The licensee should also notify appropriate State and local agencies in accordance with the agreed upon arrangements.
11 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS GENERAL EMERGENCY RGl Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Op. Modes: All RG2 Spent fuel pool level cannot be restored to at least 1.5 ft (Level 3) for 60 minutes or longer. Op. Modes: All SITE AREA EMERGENCY RSl Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Op. Modes: All RS2 Spent fuel pool level at 1.5 ft. (Level 3). Op. Modes: All ALERT RAl Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Op. Modes: All RA2 Significant lowering of water level above, or damage to, irradiated fuel. Op. Modes: All RA3 Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown.
Op. Modes: All 12 UNUSUAL EVENT RUl Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Op. Modes: All RU2 UNPLANNED loss of water level above irradiated fuel. Op. Modes: All RG1 ECL: General Emergency Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3) Notes:
- The STED/SED should declare the General Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded.
- If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes.
- If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
- The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available.
( 1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Readin!!
RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec Time After Shutdown Readin2 ::::; 1 hr > 1 hr to ::::; 2 hrs RM-6481-1
- (MSL A) 1310 mR/hr 1060 mR/hr RM-6482-1
- (MSL B) 1310 mR/hr 1060 mR/hr RM-6482-2*
(MSL C) 1310 mR/hr 1060 mR/hr RM-6481-2*
(MSL D) 1310 mR/hr 1060 mR/hr
- With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A.
(2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid CDE at or beyond the site boundary.
OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary:
Basis: Closed window dose rates greater than 1000 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 5000 mrem for one hour of inhalation.
This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to the EPA Protective Action Guides (PAGs). It includes both 13 monitored and un-monitored releases.
Releases of this magnitude will require implementation of protective actions for the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at the EPA PAG of 1,000 mrem while the 5,000 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
14 RG2 ECL: General Emergency Initiating Condition:
Spent fuel pool level cannot be restored to at leastl.5 ft. (Level 3) for 60 minutes or longer. Operating Mode Applicability:
All Emergency Action Levels: Note: The STED/SED should declare the General Emergency promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded.
(1) Spent fuel pool level cannot be restored to at least 1.5 ft. above the fuel racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to a prolonged uncovery of spent fuel. This condition will lead to fuel damage and a radiological release to the environment.
Post-Fukushima order EA-12-051 required the installation of reliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling.
It is recognized that this IC would likely not be met until well after another General Emergency IC was met; however, it is included to provide classification diversity.
15 RS1 ECL: Site Area Emergency Initiating Condition:
Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3) Notes:
- The STED/SED should declare the Site Area Emergency promptly upon determining that the applicable time has been exceeded, or will likely be exceeded.
- If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes.
- If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
- The pre-calculated effluent monitor values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available.
- (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+7 uCi/sec Time After Shutdown Reading :::; 1 hr > 1 hr to :::; 2 hrs RM-6481-1
- (MSL A) 130 mR/hr 100 mR/hr RM-6482-1
- (MSL B) 130 mR/hr 100 mR/hr RM-6482-2*
(MSL C) 130 mR/hr 100 mR/hr RM-6481-2*
(MSL D) 130 mR/hr 100 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to 1-FW-P-37A.
(2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary.
OR (3) Field survey results indicate EITHER of the following at or beyond the site boundary:
Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid CDE greater than 500 mrem for one hour of inhalation.
16 Basis: This IC addresses a release of gaseous radioactivity that results in projected or actual offsite doses greater than or equal to 10% of the EPA Protective Action Guides (PAGs). It includes both monitored and un-monitored releases.
Releases of this magnitude are associated with the failure of plant systems needed for the protection of the public. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at 10% of the EPA PAG of 1,000 mrem while the 500 mrem thyroid CDE was established in consideration of the 1:5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Escalation of the emergency classification level would be via IC RGI. 17 _ _j RS2 ECL: Site Area Emergency Initiating Condition:
Spent fuel pool level at 1.5 ft.(Level
- 3) Operating Mode Applicability:
All Emergency Action Levels: (1) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220) .. Basis: This IC addresses a significant loss of spent fuel pool inventory control and makeup capability leading to IMMINENT fuel damage. This condition entails major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration.
Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling.
It is recognized that this IC would likely not be met until well after another Site Area Emergency IC was met; however, it is included to provide classification diversity.
Escalation of the emergency classification level would be via IC RG 1 or RG2. 18 RA1 ECL: Alert Initiating Condition:
Release of gaseous or liquid radioactivity resulting in offsite dose greater than 10 mrem TEDE or 50 mrem thyroid CDE. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3 or 4) Notes:
- The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded.
- If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 15 minutes.
- If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
- The pre-calculated effluent monitor.values presented in EAL #1 should be used for emergency classification assessments until the results from a dose assessment using actual meteorology are available.
(1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: OR Monitor Reading RM-6528-4 (WRGM rate) 2.85E+6 uCi/sec RM-6481-1
- (MSL A) 10 mR/hr RM-6482-1
- (MSL B) 10 mR/hr RM-6482-2*
(MSL C) 10 mR/hr RM-6481-2*
(MSL D) 10 mR/hr *With release path to the environment from affected steam line, open ASDV or SRV, line is faulted, or open steam supply to l-FW-P-37A.
(2) Dose assessment using actual meteorology indicates doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary.
OR (3) Analysis of a liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure.
OR (4) Field survey results indicate EITHER of the following at or beyond the site boundary:
- Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer.
- Analyses of field survey samples indicate thyroid CDE greater than 50 mrem for one hour of inhalation.
19 Basis: This IC addresses a release of gaseous or liquid radioactivity that results in projected or actual off site doses greater than or equal to 1 % of the EPA Protective Action Guides (PA Gs). It includes both monitored and un-monitored releases.
Releases of this magnitude represent an actual or potential substantial degradation of the level of safety of the plant as indicated by a radiological release that significantly exceeds regulatory limits. Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
The TEDE dose is set at 1 % of the EPA PAG of 1,000 mrem while the 50 mrem thyroid CDE was established in consideration of the 1 :5 ratio of the EPA PAG for TEDE and thyroid CDE. Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Escalation of the emergency classification level would be via IC RSI. 20 RA2 ECL: Alert Initiating Condition:
Significant lowering of water level above, or damage to, irradiated fuel. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3) (1) Uncovery of irradiated fuel in the REFUELING PATHWAY.
OR (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by high-alarm, or reading in excess of the current high-alarm setpoint on ANY of the following radiation monitors:
OR RM-6518-1 FSB High Range RM-6562-1 FSB Vent RM-6535A-1 Manipulator Crane RM-6535B-1 Manipulator Crane (3) Lowering of spent fuel pool level to 12 ft. 3 in. above the fuel racks on SF-LI-2616 (MPCS computer point A4172) or SF-LI-2617 (MPCS computer point A4220). Basis: REFUELING PATHWAY:
The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses events that have caused IMMINENT or actual damage to an irradiated fuel assembly, or a significant lowering of water level within the spent fuel pool. These events present radiological safety challenges to plant personnel and are precursors to a release of radioactivity to the environment.
As such, they represent an actual or potential substantial degradation of the level of safety of the plant. -This IC applies to irradiated fuel that is licensed for dry storage up to the point that the loaded storage cask is sealed. Once sealed, damage to a loaded cask causing loss of the CONFINEMENT BOUNDARY is classified in accordance with IC EUl. Escalation of the emergency would be based on either Recognition Category R or C ICs. EAL#l This EAL escalates from RU2 in that the loss of level, in the affected portion of the REFUELING
- PATHWAY, is of sufficient magnitude to have resulted in uncovery of irradiated fuel. Indications of irradiated fuel uncovery may include direct or indirect visual observation, as well as significant changes in water and radiation levels, or other plant parameters.
Computational aids may also be used. Classification of an event using this EAL should be based on the totality of available indications, reports and observations.
While an area radiation monitor could detect an increase in a dose rate due to a lowering of water level in some portion of the REFUELING
- PATHWAY, the reading may not be a reliable indication of whether or not the fuel is actually uncovered.
To the degree possible, readings should be considered in combination with other available indications of inventory loss. 21 A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. EAL#2 This EAL addresses a release of radioactive material caused by mechanical damage to irradiated fuel. Damaging events may include the dropping, bumping or binding of an assembly, or dropping a heavy load onto an assembly.
A rise in readings on radiation monitors should be considered in conjunction with in-plant reports or observations of a potential fuel damaging event. EAL#3 Spent fuel pool water level at this value is within the lower end of the level range necessary to prevent significant dose consequences from direct gamma radiation to personnel performing operations in the vicinity of the spent fuel pool. This condition reflects a significant loss of spent fuel pool water inventory and thus it is also a precursor to a loss of the ability to adequately cool the irradiated fuel assembles stored in the pool. Post-Fukushima order EA-12-051 required the installation ofreliable SFP level indication capable of identifying normal level (Level 1 ), SFP level 12 ft. 3 in. above the top of the fuel racks (Level 2) and SFP level 1.5 ft. above the top of the fuel racks (Level 3). The Spent Fuel Pool Instrumentation System (SFPIS) consists of two new independent level instrument channels (SF-L-2616 and SF-L-2617) in the Spent Fuel system. The SFPIS channels will be used to monitor spent fuel pool level during and following beyond design basis events that could challenge the capability to ensure optimum protection for the stored fuel assemblies in the pool. Each channel is capable of measuring SFP level over a span from just above the top of the spent fuel racks to the normal SFP operating water level. The SFPIS will be monitored in accordance with Beyond Design Basis guidelines contained in FSGs for Extended Loss of AC Power and Alternate SFP Makeup and Cooling.
Escalation of the emergency classification level would be via ICs RSI or RS2. 22 RA3 ECL: Alert Initiating Condition:
Radiation levels that IMPEDE access to equipment necessary for normal plant operations, shutdown or cooldown.
Operating Mode Applicability:
All Emergency Action Levels: (1 or 2) Note: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted.
(1) Dose rate greater than 15 mR/hr in ANY of the following areas: Control Room RM6550 Central Alarm Station (CAS) by survey Secondary Alarm Station (SAS) by survey OR (2) An UNPLANNED event results in radiation levels that prohibit or IMPEDE access to any of the following plant rooms or areas: Table HI Area Mode Primary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation
-26 ft elevation Turbine Building 21 ft elevation 1, 2, 3 50 ft elevation Essential Switchgear Rooms 1, 2, 3, 4 Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation Containment 3,4 RHR/CBS Equipment Vaults 3,4 23 Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses elevated radiation levels in certain plant rooms/areas sufficient to preclude or impede personnel from performing actions necessary to maintain normal plant operation, or to perform a normal plant cooldown and shutdown.
As such, it represents an actual or potential substantial degradation of the level of safety of the plant. The STED/SED should consider the cause of the increased radiation levels and determine if another IC may be applicable.
For EAL #2, an Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the elevated radiation levels. The emergency classification is not contingent upon whether entry is actually necessary at the time of the increased radiation levels. Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area.
An emergency declaration is not warranted ifany of the following conditions apply.
- The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the elevated radiation levels).
For example, the plant is in Mode I when the radiation increase occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room until Mode 4.
- The increased radiation levels are a result of a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area.
- The action for which room/area entry is required is of an administrative or record keeping nature.
- The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs. 24 RU1 ECL: Notification of Unusual Event Initiating Condition:
Release of gaseous or liquid radioactivity greater than 2 times the ODCM limits for 60 minutes or longer. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2) Notes:
- The STED/SED should declare the Unusual Event promptly upon determining that 60 minutes has been exceeded, or will likely be exceeded.
- If an ongoing release is detected and the release start time is unknown, assume that the release duration has exceeded 60 minutes.
- If the effluent flow past an efflue:µt monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
- 1) a Valid reading on ANY of the following effluent monitors greater than 2 times the value of the current high-alarm setpoint for 60 minutes or longer: RM-6509-1 (WTT Disch) RM-6521-1 (TB Sump) RM-6519-1 (SG Blowdown)
RM-6473-1 (WT LIQ EFF) RM-6528-4 (WRGM rate) AND b. The discharge flow to the environment is not isolated within 60 minutes.
OR 2) Sample analysis for a gaseous or liquid release indicates a concentration or release rate greater than 2 times the ODCM limits for 60 minutes or longer. Basis: This IC addresses a potential decrease in the level of safety of the plant as indicated by a level radiological release that exceeds regulatory commitments for an extended period of time. It includes any gaseous or liquid radiological
- release, monitored or un-monitored, including those for which a radioactivity discharge permit is normally prepared.
Nuclear power plants incorporate design features intended to control the release of radioactive effluents to the environment.
- Further, there are administrative controls established to prevent unintentional
- releases, and to control and monitor intentional releases.
The occurrence of an extended, uncontrolled radioactive release to the environment is indicative of degradation in these features and/or controls.
25 Radiological effluent EALs are also included to provide a basis for classifying events and conditions that cannot be readily or appropriately classified on the basis of plant conditions alone. The inclusion of both plant condition and radiological effluent EALs more fully addresses the spectrum of possible accident events and conditions.
Classification based on effluent monitor readings assumes that a release path to the environment is established.
If the effluent flow past an effluent monitor is known to have stopped due to actions to isolate the release path, then the effluent monitor reading is no longer valid for classification purposes.
Releases should not be prorated or averaged.
For example, a release exceeding 4 times release limits for 3 0 minutes does not meet the EAL. EAL # 1 -This EAL addresses normally occurring continuous radioactivity releases from monitored gaseous or liquid effluent pathways.
EAL #1 addresses radioactivity
- releases, that for whatever reason, cause effluent radiation monitor readings to exceed two times the ODCM limit and releases are not terminated within 60 minutes.
This alarm setpoint may be associated with a planned batch release, or a continuous release path. In either case, the setpoint is established by the ODCM. Indexing the EAL threshold to the ODCM setpoints in this manner insures that the EAL threshold will never be less than the setpoint established by a specific discharge permit. The discharge flowpaths associated with RM-6509-1, 6521-1, 6519-1, and 6473-1 have automatic and manual flow isolation capability.
The EAL wording addresses a situation where a residual source term exists in a discharge flowpath AFTER the flowpath has been isolated, and the associated radiation monitor remains at values above 2 times the value of the current alarm setpoint.
EAL l .b ensures that the Initiating Condition (IC) intent of "to the environment" is met. The 60-minute assessment clock starts at the same time for both EAL l .a and l .b (i.e., clocks run concurrently).
There must be a release to the environment (i.e., the flowpath cannot be isolated) during the same period that a monitor value is greater than 2 times the value of the current high-alarm setpoint.
EAL #2 -This EAL addresses uncontrolled gaseous or liquid releases that are detected by sample analyses or environmental
- surveys, particularly on unmonitored pathways.
Escalation of the emergency classification level would be via IC RAl. 26 RU2 ECL: Notification of Unusual Event Initiating Condition:
UNPLANNED loss of water level above irradiated fuel. Operating Mode Applicability:
All Emergency Action Levels: (1) a. UNPLANNED water level drop in the REFUELING PATHWAY as indicated by ANY of the following:
Basis: 1-SF-LI-2607 (Spent Fuel Pool Level) 1-SF-LI-2629 or 1-SF-LIT-2629-1 (Reactor Refuel Cavity Level) AND b. UNPLANNED rise in area radiation levels as indicated by ANY of the following radiation monitors:
RM-6535-A-l, Containment Manipulator Crane RM-6535-B-1, Containment Manipulator Crane RM-6549-1, FSB Spent Fuel Range Low RM-6518-1, FSB Spent Fuel Range Hi UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known oi unknown.
REFUELING PATHWAY:
The reactor refueling cavity, spent fuel pool and fuel transfer canal. This IC addresses a decrease in water level above irradiated fuel sufficient to cause elevated radiation levels. This condition could be a precursor to a more serious event and is also indicative of a minor loss in the ability to control radiation levels within the plant. It is therefore a potential degradation in the level of safety of the plant. A water level decrease will be primarily determined by indications from available level instrumentation.
Other sources of level indications may include reports from plant personnel or video camera observations (if available).
A significant drop in the water level may also cause an increase in the radiation levels of adjacent areas that can be detected by monitors in those locations.
The effects of planned evolutions should be considered.
For example, a refueling bridge area radiation monitor reading may increase due to planned evolutions such as lifting of the reactor vessel head or movement of a fuel assembly.
Note that this EAL is applicable only in cases where the elevated reading is due to an UNPLANNED loss of water level. A drop in water level above irradiated fuel within the reactor vessel may be classified in accordance Recognition Category C during the Cold Shutdown and Refueling modes. Escalation of the emergency classification level would be via IC RA2. 27 4 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS Recognition Category "C" Initiating Condition Matrix GENERAL SITE AREA ALERT UNUSUAL EVENT EMERGENCY EMERGENCY CGl Loss ofreactor CSl Loss of reactor CAl Loss of reactor CUl UNPLANNED vessel/RCS inventory vessel/RCS inventory vessel/RCS inventory.
loss of reactor affecting fuel clad affecting core decay Op. Modes: 5, 6 vessel/RCS inventory integrity with heat removal for 15 minutes or containment capability.
longer. challenged.
Op. Modes: 5, 6 Op. Modes: 5, 6 Op. Modes: 5, 6 CA2 Loss of all CU2 Loss of all but offsite and all onsite one AC power source AC power to to emergency buses for emergency buses for 15 minutes or longer. 15 minutes or longer. Op. Modes: 5, 6, Op. Modes: 5, 6, De fueled De fueled CA3 Inability to CU3 UNPLANNED maintain the plant in increase in RCS cold shutdown.
temperature.
Op. Modes: 5, 6 Op. Modes: Ji 6 CU4 Loss of Vital DC power for 15 minutes or longer. Op. Modes: 5, 6 CU5 Loss of all onsite or offsite communications capabilities.
Op. Modes: 5, 6, De fueled CA6 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 5, 6 28 CG1 ECL: General Emergency Initiating Condition:
Loss of reactor vessel/RCS inventory affecting fuel clad integrity with containment challenged.
Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the General Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded.
(1) OR (2) a. RVLIS Full Range< 55% (-141.5 in) for 30 minutes or longer. AND b. ANY indication from the Containment Challenge Table C2. a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following:
RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery.
Visual observation.
AND c. ANY indication from the Containment Challenge Table C2. Containment Challenge Table C2 CONTAINMENT INTEGRITY not established
- Containment H2 concentration
- =::: 6% UNPLANNED increase in containment pressure
- If CONTAINMENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required.
Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
- 29 CONTAINMENT INTEGRITY:
The procedurally defined conditions or actions taken to secure containment and its associated structures,
- systems, and components as a functional barrier to fission product release under shutdown conditions.
This IC addresses the inability to restore and maintain reactor vessel level above the top of active fuel with containment challenged.
This condition represents actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity.
Releases can be reasonably expected to exceed EPA PAG exposure levels off site for more than the immediate site area. Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable.
With CONTAINJ\1ENT INTEGRITY not established, there is a high potential for a direct and unmonitored release of radioactivity to the environment.
If CONT AINJ\1ENT INTEGRITY is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required.
The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity.
It therefore represents a challenge to Containment integrity.
In the early stages of a core uncovery event, it is unlikely that hydrogen buildup due to a core uncovery could result in an explosive gas mixture in containment.
If all installed hydrogen gas monitors are out-of-service during an event leading to fuel cladding damage, it may not be possible to obtain a containment hydrogen gas concentration reading as ambient conditions within the containment will preclude personnel access. During periods when installed containment hydrogen gas monitors are out-of-service, operators may use the other listed indications to assess whether or not containment is challenged.
Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. In EAL 2.b, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties).
It also allows sufficient time for performance of actions to terminate
- leakage, recover inventory control/makeup equipment and/or restore level monitoring.
The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS.
30 RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanqe) -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge.
10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management.
Reference:
FSAR Table 12.3-14 31 CS1 ECL: Site Area Emergency Initiating Condition:
Loss ofreactor vessel/RCS inventory affecting core decay heat removal capability.
Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 30 minutes has been exceeded, or will likely be exceeded.
(1) OR (2) OR (3) Basis: a. CONTAINMENT INTEGRITY not established.
AND b. RVLIS Full Range< 63% (-101.9 in). a. CONTAINMENT INTEGRITY established.
AND b. RVLIS Full Range< 55% (-141.5 in). a. Reactor vessel/RCS level cannot be monitored for 30 minutes or longer. AND b. Core uncovery is indicated by ANY of the following:
RM-6535A-1 (Manipulator Crane) reading greater than 9500 mR/hr RM-6535B-1 (Manipulator Crane) reading greater than 9500 mR/hr Erratic source range monitor indication UNPLANNED increase in Containment Sumps A or B levels of sufficient magnitude to indicate core uncovery Visual observation.
CONTAINMENT INTEGRITY:
The procedurally defined conditions or actions taken to secure containment and its associated structures,
- systems, and components as a functional barrier to fission product release under shutdown conditions.
UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses a significant and prolonged loss of reactor vessel/RCS inventory control and makeup capability leading to IMMINENT fuel damage. The lost inventory may be due to a RCS component
- failure, a loss of configuration control or prolonged boiling of reactor coolant.
These conditions entail major failures of plant functions needed for protection of the public and thus warrant a Site Area Emergency declaration.
32 Following an extended loss of core decay heat removal and inventory makeup, decay heat will cause reactor coolant boiling and a further reduction in reactor vessel level. If RCS/reactor vessel level cannot be restored, fuel damage is probable.
Outage/shutdown contingency plans typically provide for re-establishing or verifying CONTAINMENT INTEGRITY following a loss of heat removal or RCS inventory control functions.
The difference in the specified RCS/reactor vessel levels ofEALs l.b and 2.b reflect the fact that with CONTAINMENT INTEGRITY established, there is a lower probability of a fission product release to the environment.
In EAL 3.a, the 30-minute criterion is tied to a readily recognizable event start time (i.e., the total loss of ability to monitor level), and allows sufficient time to monitor, assess and correlate reactor and plant conditions to determine if core uncovery has actually occurred (i.e., to account for various accident progression and instrumentation uncertainties).
It also allows sufficient time for performance of actions to terminate
- leakage, recover inventory control/makeup equipment and/or restore level monitoring.
Manipulator Crane setpoint of 9500 mR/hr is 95% of the monitor range. The inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS.
RVLIS LEVEL VESSEL LEVEL (%) (inches from vessel flanael -108 119.8 100 81.3 90 31.8 80 -17.7 70 -67.2 63 -101.9 RC-Ll-9405, RC-LIT-9467, 60 -116.7 and the Tygon Tube do 55 -141.5 not indicate reactor vessel 50 -166.2 level when actual level is 40 -215.7 less than -95" due to the 30 -265.2 weir on the RCP 20 -314.7 discharge.
10 -364.2 0 -413.7 These EALs address concerns raised by Generic Letter 88-17, Loss of Decay Heat Removal; SECY 91-283, Evaluation of Shutdown and Low Power Risk Issues; NUREG-1449, Shutdown and Low-Power Operation at Commercial Nuclear Power Plants in the United States; and NUMARC 91-06, Guidelines for Industry Actions to Assess Shutdown Management.
Escalation of the emergency classification level would be via IC CG 1 or RG 1. 33 CA1 ECL: Alert Initiating Condition:
Loss ofreactor vessel/RCS inventory.
Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Loss ofreactor vessel/RCS inventory as indicated by RVLIS full range< 64% (-96.9 in.) OR (2) Basis: a. Reactor vessel/RCS level cannot be monitored for 15 minutes or longer. AND b. UNPLANNED increase in Containment Sumps A or B levels due to a loss of reactor vessel/RCS inventory.
UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses conditions that are precursors to a loss of the ability to adequately cool irradiated fuel (i.e., a precursor to a challenge to the fuel clad barrier).
This condition represents a potential substantial reduction in the level of plant safety. For EAL #1, a lowering of water level below 64% indicates that operator actions have not been successful in restoring and maintaining reactor vessel/RCS water level. The heat-up rate of the coolant will increase as the available water inventory is reduced.
A continuing decrease in water level will lead to core uncovery.
Although
- related, EAL #1 is concerned with the loss of RCS inventory and not the potential concurrent effects on systems needed for decay heat removal.
An increase in RCS temperature caused by a loss of decay heat removal capability is evaluated under IC CA3. For EAL #2, the inability to monitor reactor vessel/RCS level may be caused by instrumentation and/or power failures, or water level dropping below the range of available instrumentation.
If water level cannot be monitored, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against other potential sources of water flow to ensure they are indicative ofleakage from the reactor vessel/RCS.
34 RVLIS LEVEL (%)
100 90 80 VESSEL LEVEL (inches from vessel flange) 119.8" 81.3" 31.8" -17.7" 70 -67.2" 64 -96.9" 60 -116.7" 50 -166.2" RC-LI-9405, RC-LIT-9467, and 40 -215.7" the Tygon Tube do not indicate 30 -265.2" reactor vessel level when actual level is less than -95" due to the 20 -314.7" weir on the RCP discharge.
10 -364.2" 0 -413.7" The 15-minute duration for the loss of level indication was chosen because it is half of the EAL duration specified in IC CSl If the reactor vessel/RCS inventory level continues to lower, then escalation to Site Area Emergency would be via IC CS 1. 35 CA2 ECL: Alert Initiating Condition:
Loss of all offsite and all onsite AC power to emergency buses for 15 minutes or longer. Operating Mode Applicability:
5, 6, Defueled Emergency Action Levels: Note:
- The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
- For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional.
(1) Loss of ALL offsite and ALL onsite AC Power to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure
- control, spent fuel heat removal and the ultimate heat sink. When in the cold shutdown, refueling, or defueled mode, this condition is not classified as a Site Area Emergency because of the increased time available to restore an emergency bus to service.
Additional time is available due to the reduced core decay heat load, and the lower temperatures and pressures in various plant systems.
Thus, when in these modes, this condition represents an actual or potential substantial degradation of the level of safety of the plant. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively.
These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
36 The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures.
Reference:
UFSAR Section 8.3.1, AC Power Systems Escalation of the emergency classification level would be via IC CSl or RSI. 37 CA3 ECL: Alert Initiating Condition:
Inability to maintain the plant in cold shutdown.
Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Alert promptly upon determining that the applicable time has been exceeded, or will likely be exceeded.
(1) UNPLANNED increase in RCS temperature to greater than 200° F for greater than the duration specified in the following table. TableCl -RCS Heat-up Duration Thresholds RCS Status CONTAINMENT INTEGRITY Heat-up Duration Status INTACT and reactor vessel 2: -Not applicable 60 minutes*
36 inches Not INT A CT or reactor vessel < Established 20 minutes*
-36 inches Not Established 0 minutes
- IfRHR is in operation within this time frame and RCS temperature is being reduced, the EAL is not applicable.
OR (2) UNPLANNED RCS pressure increase greater than 25 psig. (This EAL does not apply during water-solid plant conditions.)
Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
INTACT: Capable of being pressurized.
This IC addresses conditions involving a loss of decay heat removal capability or an addition of heat to the RCS in excess of that which can currently be removed.
Either condition represents an actual or potential substantial degradation of the level of safety of the plant. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification.
The RCS Heat-up Duration Thresholds table addresses an increase in RCS temperature when CONTAINMENT INTEGRITY is established but the RCS is not intact, or RCS inventory is reduced.
The 20-minute criterion was included to allow time for operator action to address the temperature increase.
The RCS Heat-up Duration Thresholds table also addresses an increase in RCS temperature with the RCS intact. The status of CONTAINMENT INTEGRITY is not crucial in this condition since the intact RCS is providing a high pressure barrier to a fission product release.
The 60-minute time frame should allow sufficient time to address the temperature increase without a substantial degradation in plant safety. 38 r Finally, in the case where there is an increase in RCS temperature, the RCS is not intact or is at reduced inventory and CONTAINMENT INTEGRITY is not established, no heat-up duration is allowed (i.e., 0 minutes).
This is because 1) the evaporated reactor coolant may be released directly into the Containment atmosphere and subsequently to the environment, and 2) there is reduced reactor coolant inventory above the top of irradiated fuel. EAL #2 provides a pressure-based indication of RCS heat-up.
The wide-range RCS pressure transmitters have a range of 0 to 3,000 psig. The main control boards have two post-accident monitoring qualified meters, one for each wide-range RCS pressure transmitter.
These meters have major divisions at 100 psig intervals and minor divisions at 50 psig intervals.
Since it is possible to read the approximate mid-point between minor divisions, the value is set to 25 psig. Escalation of the emergency classification level would be via IC CSl or RSI. 39 CA6 ECL: Alert Initiating Condition:
Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability:
5, 6 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake)
Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following:
- 1. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed.
EXPLOSION:
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization.
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion.
Such events may require a post-event inspection to determine if the attributes of an explosion are present.
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements,
- testing, or analysis.
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure.
SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related.
This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 40 EAL l .b. l addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available.
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components.
Operators will make this determination based on the totality of available event and damage report information.
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC CSl or RSI. 41 CU1 ECL: Notification of Unusual Event Initiating Condition:
UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level less than a required lower limit of an operating band, specified by an operating procedure for 15 minutes or longer. OR (2) a. Reactor vessel/RCS level cannot be monitored.
AND b. UNPLANNED increase in Containment Sump A or B level. Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses the inability to restore and maintain water level to a required minimum level (or the lower limit of a level band), or a loss of the ability to monitor reactor vessel/RCS level concurrent with indications of coolant leakage.
Either of these conditions is considered to be a potential degradation of the level of safety of the plant. Refueling evolutions that decrease RCS water inventory are carefully planned and controlled.
An UNPLANNED event that results in water level decreasing below a procedurally required limit warrants the declaration of an Unusual Event due to the reduced water inventory that is available to keep the core covered.
EAL #1 recognizes that the minimum required reactor vessel/RCS level can change several times during the course of a refueling outage as different plant configurations and system lineups are implemented.
This EAL is met ifthe minimum level, specified for the current plant conditions, cannot be maintained for 15 minutes or longer. The minimum level is typically specified in the applicable operating procedure but may be specified in another controlling document.
The 15-minute threshold duration allows sufficient time for prompt operator actions to restore and maintain the expected water level. This criterion excludes transient conditions causing a brief lowering of water level. EAL #2 addresses a condition where all means to determine reactor vessel/RCS level have been lost. In this condition, operators may determine that an inventory loss is occurring by observing changes in sump and/or tank levels. Sump and/or tank level changes must be evaluated against 42 other potential sources of water flow to ensure they are indicative of leakage from the reactor vessel/RCS.
Continued loss of RCS inventory may result in escalation to the Alert emergency classification level via either IC CAI or CA3. 43 CU2 ECL: Notification of Unusual Event Initiating Condition:
Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability:
5, 6, Defueled Emergency Action Levels: Notes: (1)
- The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
- For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
- a. AND AC power capability to Both AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS.
NOTE There are six power sources to consider:
- 345 kV offsite power line 369
- 345 kV offsite power line 363
- 345 kV offsite power line 394
- SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional Basis: SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related.
This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS.
In this condition, the sole AC power source may be powering one, or more than one, train of related equipment.
When in the cold shutdown, refueling, or defueled mode, this condition is not classified as an Alert because of the increased time available to restore another power source to service.
Additional time is available due to the reduced core decay heat load, and the lower temperatures 44 and pressures in various plant systems.
Thus, when in these modes, this condition is considered to be a potential degradation of the level of safety of the plant. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. 1-EDE-SWG-5 (E5) and 1-EDE-SWG-6 (E6) are the 4.16 kV emergency buses for Train A and Train B respectively.
These buses supply all safety-related loads. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures.
The subsequent loss of the remaining single power source would escalate the event to an Alert in accordance with IC CA2.
Reference:
UFSAR Section 8.3.1, AC Power Systems 45 CU3 ECL: Notification of Unusual Event Initiating Condition:
UNPLANNED increase in RCS temperature.
Operating Mode Applicability:
5, 6 Emergency Action Levels: (1 or 2) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) UNPLANNED increase in RCS temperature to greater than 200°F. OR (2) Loss of ALL RCS temperature and reactor vessel/RCS level indication for 15 minutes or longer. Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses an UNPLANNED increase in RCS temperature above the Technical Specification cold shutdown temperature limit, or the inability to determine RCS temperature and level, represents a potential degradation of the level of safety of the plant. If the RCS is not intact and CONTAINMENT INTEGRITY is not established during this event, the STED/SED should also refer to IC CA3. A momentary UNPLANNED excursion above the Technical Specification cold shutdown temperature limit when the heat removal function is available does not warrant a classification.
EAL #1 involves a loss of decay heat removal capability, or an addition of heat to the RCS in excess of that which can currently be removed, such that reactor coolant temperature cannot be maintained below the cold shutdown temperature limit specified in Technical Specifications.
During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation.
During an outage, the level in the reactor vessel will normally be maintained above the reactor vessel flange. Refueling evolutions that lower water level below the reactor vessel flange are carefully planned and controlled.
A loss of forced decay heat removal at reduced inventory may result in a rapid increase in reactor coolant temperature depending on the time after shutdown.
EAL #2 reflects a condition where there has been a significant loss of instrumentation capability necessary to monitor RCS conditions and operators would be unable to monitor key parameters necessary to assure core decay heat removal.
During this condition, there is no immediate threat of fuel damage because the core decay heat load has been reduced since the cessation of power operation.
Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation to Alert would be via IC CAI based on an inventory loss or IC CA3 based on exceeding plant configuration-specific time criteria.
46 CU4 ECL: Notification of Unusual Event Initiating Condition:
Loss of Vital DC power for 15 minutes or longer. Operating Mode Applicability:
5, 6 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Indicated voltage is less than 105V on required Vital DC buses associated with the Protected Train for 15 minutes or longer. Train A 1 lA and 1 lC Train B 1 lB and 1 lD Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control operable SAFETY SYSTEMS when the plant is in the cold shutdown or refueling mode. In these modes, the core decay heat load has been significantly
- reduced, and coolant system temperatures and pressures are lower; these conditions increase the time available to restore a vital DC bus to service.
Thus, this condition is considered to be a potential degradation of the level of safety of the plant. As used in this EAL, "required" means the Vital DC buses necessary to support operation of the in-service, or operable, train or trains of SAFETY SYSTEM equipment.
For example, if Train A is out-of-service (inoperable) for scheduled outage maintenance work and Train Bis in-service (operable),
then a loss of Vital DC power affecting Train B would require the declaration of an Unusual Event. A loss of Vital DC power to Train A would not warrant an emergency classification.
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Per DBD-ED-05, the DC bus voltage range within which the 125 Volt DC system is considered operable is 105 volts minimum to 140 volts maximum.
The vital DC Buses (Switchgear) are SWG-1 lA and 1 lC for Train A and SWG-1 lB and 1 lD for Train B.
Reference:
UFSAR Section 8.3.2, DC Power System Procedure OS1248.0l, Loss ofa Vital 125 VDC Bus Procedure VPRO F5278, Loss of All Vital DC Power DBD-ED-05, 125 VDC System Depending upon the event, escalation of the emergency classification level would be via IC CAI or CA3, or an IC in Recognition Category R. 47 ECL: Notification of Unusual Event Initiating Condition:
Loss of all onsite or offsite communications capabilities.
Operating Mode Applicability:
5, 6, Defueled Emergency Action Levels: (1 or 2 or 3) (1) Loss of ALL of the following onsite communication methods:
In-Plant (PBX) Telephones Gai-Tronics Plant Radio System OR (2) Loss of ALL of the following ORO communications methods:
Nuclear Alert System (NAS) Backup NAS Control Room/TSC telephones OR (3) Loss of ALL of the following NRC communications methods:
Basis: Emergency Notification System (ENS) Control Room/TSC telephones FTS telephones in the TSC cus This IC addresses a significant loss of on-site or offsite communications capabilities.
While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and theNRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible.
EAL #1 addresses a total loss of the communications methods used in support of routine plant operations.
EAL #2 addresses a total loss of the communications methods used to notify all OR Os of an emergency declaration.
The OROs referred to here are Commonwealth of Massachusetts and State of New Hampshire.
EAL #3 addresses a total loss of the communications methods used to notify the NRC of an emergency declaration.
48 5 INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI) ICS/EALS Recognition Category "E" Initiating Condition Matrix UNUSUAL EVENT EUl Damage to a loaded cask CONFINEMENT BOUNDARY.
Op. Modes: All 49 EU1 ECL: Notification of Unusual Event Initiating Condition:
Damage to a loaded cask CONFINEMENT BOUNDARY.
Operating Mode Applicability:
All Emergency Action Levels: Note: The on-contact dose rate may be determined based on measurement of a dose rate at some distance from the cask (1) Damage to a loaded cask CONFINEMENT BOUNDARY as indicated by ANY of the following on-contact surface radiation readings greater than: 1600 mrem/hr at the front bird screen 4 mrem/hr at the door centerline 4 mrem/hr at the end shield wall exterior Basis: CONFINEMENT BOUNDARY:
The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage.
This IC addresses an event that results in damage to the CONFINEMENT BOUNDARY of a storage cask containing spent fuel. It applies to irradiated fuel that is licensed for dry storage beginning at the point that the loaded storage cask is sealed in the Horizontal Storage Module. The issues of concern are the creation of a potential or actual release path to the environment, degradation of one or more fuel assemblies due to environmental
- factors, and configuration changes which could cause challenges in removing the cask or fuel from storage.
The existence of "damage" is determined by radiological survey. The technical specification multiple of "2 times", which is also used in Recognition Category RIC RUl, is used here to distinguish between non-emergency and emergency conditions.
The emphasis for this classification is the degradation in the level of safety of the spent fuel cask and not the magnitude of the associated dose or dose rate. It is recognized that in the case of extreme damage to a loaded cask, the fact that the "on-contact" dose rate limit is exceeded may be determined based on measurement of a dose rate at some distance from the cask. Security-related events for ISFSis are covered under ICs HUI and HAI.
Reference:
Appendix A to Certificate Of Compliance No. 1030 NUHOMS HD System Generic Technical Specifications 5.4.3. 50 6 FISSION PRODUCT BARRIER ICS/EALS Recognition Category "F" Initiating Condition Matrix GENERAL EMERGENCY Loss of any two barriers and Loss or FGl Potential Loss of the third barrier.
Op. Modes: 1, 3, 2, 4 SITE AREA EMERGENCY Loss or Potential Loss of any two barriers.
FSl Ov. Modes: 1, 3, 2, 4 ALERT Any Loss or any Potential Loss of either the FAl Fuel Clad or RCS barrier.
Ov. Modes: 1, 3, 2, 4 51 Fission Product Barrier Table Thresholds for LOSS or POTENTIAL LOSS of Barriers FGlGENERALEMERGENCY FSl SITE AREA EMERGENCY FAlALERT Loss of any two barriers and Loss or Loss or Potential Loss of any two barriers.
Any Loss or any Potential Loss of either Potential Loss of the third barrier.
the Fuel Clad or RCS barrier.
Fuel Clad Barrier RCS Barrier Containment Barrier LOSS POTENTIAL LOSS LOSS POTENTIAL LOSS LOSS POTENTIAL LOSS 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage Not Applicable A. Core Cooling (C) A. An automatic or A. Operation of a second A. A leaking or Not Applicable CSP-ORANGE manual SI actuation is charging pump in the RUPTURED SG is entry conditions met required by EITHER normal charging FAULTED outside of (NOTE 1) of the following:
mode is required by containment.
- 1. UNISOLABLE EITHER of the RCS leakage following:
OR 1. UNI SO LAB LE 2. SG tube RCS leakage RUPTURE.
OR B. RCS Integrity (P) CSF -RED entry conditions met with RCS press > 300 psig. (NOTE 1). 2. Inadequate Heat Removal 2. Inadequate Heat Removal 2. Inadequate Heat Removal A. Core Cooling (C) A. Core Cooling (C) Not Applicable A. Heat Sink (H) CSF -Not Applicable A. Core Cooling (C) CSF CSF -RED entry CSP-ORANGE RED entry conditions
-RED entry conditions conditions met. entry conditions met. met. (NOTE 1) met for 15 minutes or (NOTE I) (NOTE!) longer. (NOTE I) OR B. Heat Sink (H) CSF -RED entry conditions met. (NOTE I) 52
- 3. RCS Activity I Containment Radiation
- 3. RCS Activity I Containment Radiation
- 3. RCS Activity I Containment Radiation A. PostLOCA Not Applicable A. Post LOCA Radiation Not Applicable Not Applicable A. Post LOCA Radiation Radiation Monitors Monitors Monitors RM 6576A-l or RM RM 6576A-l or RM RM 6576A-1 or RM 6576B-l 6576B-1 6576B-l 2: 95 R/hr. 2: 16 R/hr. 2: 1,305 R/hr .. OR B. RCS activity
> 300 uCi/gm Dose Equivalent I 131 as determined per Procedure CS0925.0l, Reactor Coolant Post Accident Sampling.
- 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass Not Applicable Not Applicable Not Applicable Not Applicable A. Containment isolation A. Containment (Z) CSF -is required RED entry conditions AND met. (NOTE 1) EITHER of the OR following:
B. Containment H2 1. Containment concentration 2: 6% integrity has been OR lost based on STED/SED C. I. Containment judgment.
pressure>
18 psig OR AND 2. UNI SO LAB LE 2. Less than one full pathway from the train of containment to Containment the environment Building Spray exists. (CBS) is OR operating per design for 15 B. Indications of RCS minutes or longer. leakage outside of containment.
53
- 5. STED/SED Judgment
- 5. STED/SED Judgment
- 5. STED/SED Judgment A. ANY condition in A. ANY condition in the A. ANY condition in the A. ANY condition in the A. ANY condition in the A. ANY condition in the the opinion of the opinion of the opinion of the opinion of the opinion of the opinion of the STED/SED that STED/SED that STED/SED that STED/SED that STED/SED that STED/SED that indicates Loss of the indicates Potential indicates Loss of the indicates Potential indicates Loss of the indicates Potential Loss Fuel Clad Barrier.
Loss of the Fuel Clad RCS Barrier.
Loss of the RCS Containment Barrier.
of the Containment Barrier.
Barrier.
Barrier.
NOTE 1: Refer to ER 1.1, Section 1.1, Discussion concerning the proper use of CSFSTs as EALs 54 Basis Information For Fission Product Barrier Table FUEL CLAD BARRIER THRESHOLDS:
The Fuel Clad Barrier consists of the cladding material that contains the fuel pellets.
Potential Loss l .A This reading indicates a reduction in reactor vessel water level sufficient to allow the onset of heat-induced cladding damage. 2. Inadequate Heat Removal Loss 2.A This reading indicates temperatures within the core are sufficient to cause significant superheating of reactor coolant.
Potential Loss 2.A This reading indicates temperatures within the core are sufficient to allow the onset of heat-induced cladding damage. Potential Loss 2.B This condition indicates an extreme challenge to the ability to remove RCS heat using the steam generators (i.e., loss of an effective secondary-side heat sink). This condition represents a potential loss of the Fuel Clad Barrier.
In accordance with EOPs, there may be unusual accident conditions during which operators intentionally reduce the heat removal capability of the steam generators; during these conditions, classification using threshold is not warranted.
Meeting this threshold results in a Site Area Emergency because this threshold is identical to RCS Barrier Potential Loss threshold 2.A; both will be met. This condition warrants a Site Area Emergency declaration because inadequate RCS heat removal may result in fuel heat-up sufficient to damage the cladding and increase RCS pressure to the point where mass will be lost from the system. As a potential loss indication, developers should consider including a threshold the same as, or similar to, "Core Cooling Orange entry conditions met" in accordance with the guidance at the front of this section.
As a potential loss indication, developers should consider including a threshold the same as, or similar to, "Heat Sink Red entry conditions met" in accordance with the guidance at the front of this section.
- 3. RCS Activity I Containment Radiation Loss 3.A The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the containment, assuming that reactor coolant activity equals 300µCi/gm dose equivalent I-131. Reactor coolant activity above this level is greater than that expected for iodine spikes and corresponds to an approximate range of 2% to 5% fuel clad damage. Since this condition indicates that a significant amount of fuel clad damage has occurred, it represents a loss of the Fuel Clad Barrier.
55 The radiation monitor reading in this threshold is higher than that specified for RCS Barrier Loss threshold 3.A since it indicates a loss of both the Fuel Clad Barrier and the RCS Barrier.
Note that a combination of the two monitor readings appropriately escalates the emergency classification level to a Site Area Emergency.
Loss 3.B This threshold indicates that RCS radioactivity concentration is greater than 300 µCi/gm dose equivalent I-131. Reactor coolant activity above this level is greater than that expected for iodine spikes and corresponds to an approximate range of 2% to 5% fuel clad damage. Since this condition indicates that a significant amount of fuel clad damage has occurred, it represents a loss of the Fuel Clad Barrier.
There is no Potential Loss threshold associated with RCS Activity I Containment Radiation.
- 4. Containment Integrity or Bypass Not Applicable (included for numbering consistency)
- 5. STED/SED Judgment Loss 5.A This threshold addresses any other factors that may be used by the STED/SED in determining whether the Fuel Clad Barrier is lost. Potential Loss 5 .A This threshold addresses any other factors that may be used by the STED/SED in determining whether the Fuel Clad Barrier is potentially lost. The STED/SED should also consider whether or not to declare the barrier potentially lost in the event that barrier status cannot be monitored.
56 RCS BARRIER THRESHOLDS:
The RCS Barrier includes the RCS primary side and its connections up to and including the pressurizer safety and relief valves, and other connections up to and including the primary isolation valves. 1. RCS or SG Tube Leakage Loss I.A This threshold is based on an UNISOLABLE RCS leak of sufficient size to require an automatic or manual actuation of the Emergency Core Cooling System (ECCS). This condition clearly represents a loss of the RCS Barrier.
This threshold is applicable to unidentified and pressure boundary
- leakage, as well as identified leakage.
It is also applicable to UNISOLABLE RCS leakage through an interfacing system. The mass loss may be into any location
-inside containment, to the secondary-side (i.e., steam generator tube leakage) or outside of containment.
A steam generator with primary-to-secondary leakage of sufficient magnitude to require a safety injection is considered to be RUPTURED.
If a RUPTURED steam generator is also FA UL TED outside of containment, the declaration escalates to a Site Area Emergency since the Containment Barrier Loss threshold I .A will also be met. Potential Loss l .A This threshold is based on an UNISOLABLE RCS leak that results in the inability to maintain pressurizer level within specified limits by operation of a normally used charging (makeup) pump, but an ECCS (SI) actuation has not occurred.
The threshold is met when an operating procedure, or operating crew supervision, directs that a standby charging (makeup) pump be placed in service to restore and maintain pressurizer level. This threshold is applicable to unidentified and pressure boundary
- leakage, as well as identified leakage.
It is also applicable to UNISOLABLE RCS leakage through an interfacing system. The mass loss may be into any location
-inside containment, to the secondary-side (i.e., steam generator tube leakage) or outside of containment.
If a leaking steam generator is also FAUL TED outside of containment, the declaration escalates to a Site Area Emergency since the Containment Barrier Loss threshold l .A will also be met. Potential Loss l .B This condition indicates an extreme challenge to the integrity of the RCS pressure boundary due to pressurized thermal shock -a transient that causes rapid RCS cooldown while the RCS is in Mode 3 or higher (i.e., hot and pressurized).
- 2. Inadequate Heat Removal There is no Loss threshold associated with Inadequate Heat Removal.
Potential Loss 2.A This condition indicates an extreme challenge to the ability to remove RCS heat using the steam generators (i.e., loss of an effective secondary-side heat sink). This condition represents a potential loss of the RCS Barrier.
In accordance with EOPs, there may be unusual accident conditions during which operators intentionally reduce the heat removal capability of the steam generators; during these conditions, classification using threshold is not warranted.
57 Meeting this threshold results in a Site Area Emergency because this threshold is identical to Fuel Clad Barrier Potential Loss threshold 2.B; both will be met. This condition warrants a Site Area Emergency declaration because inadequate RCS heat removal may result in fuel heat-up sufficient to damage the cladding and increase RCS pressure to the point where mass will be lost from the system. 3. RCS Activity I Containment Radiation Loss 3.A The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the containment, assuming that reactor coolant activity equals Technical Specification allowable limits. This value is lower than that specified for Fuel Clad Barrier Loss threshold 3.A since it indicates a loss of the RCS Barrier only. There is no Potential Loss threshold associated with RCS Activity I Containment Radiation.
- 4. Containment Integrity or Bypass Not Applicable (included for numbering consistency)
- 5. STED/SED Judgment Loss 5.A This threshold addresses any other factors that may be used by the STED/SED in determining whether the RCS Barrier is lost. Potential Loss 5 .A This threshold addresses any other factors that may be used by the STED/SED in determining whether the RCS Barrier is potentially lost. The STED/SED should also consider whether or not to declare the barrier potentially lost in the event that barrier status cannot be monitored.
58 CONTAINMENT BARRIER THRESHOLDS:
The Containment Barrier includes the containment building and connections up to and including the outermost containment isolation valves. This barrier also includes the main steam, feedwater, and blowdown line extensions outside the containment building up to and including the outermost secondary side isolation valve. Containment Barrier thresholds are used as criteria for escalation of the ECL from Alert to a Site Area Emergency or a General Emergency.
- 1. RCS or SG Tube Leakage Loss LA This threshold addresses a leaking or RUPTURED Steam Generator (SG) that is also FAULTED outside ofcontainment.
The condition of the SG, whether leaking or RUPTURED, is determined in accordance with the thresholds for RCS Barrier Potential Loss LA and Loss LA, respectively.
This condition represents a bypass of the containment barrier.
FAULTED is a defined term within the NEI 99-01 methodology; this determination is not necessarily dependent upon entry into, or diagnostic steps within, an EOP. For example, ifthe pressure in a steam generator is decreasing uncontrollably
[part of the FAULTED definition]
and the faulted steam generator isolation procedure is not entered because EOP user rules are dictating implementation of another procedure to address a higher priority condition, the steam generator is still considered FAUL TED for emergency classification purposes.
The FAUL TED criterion establishes an appropriate lower bound on the size of a steam release that may require an emergency classification.
Steam releases of this size are readily observable with normal Control Room indications.
The lower bound for this aspect of the containment barrier is analogous to the lower bound criteria specified in IC MU3 for the fuel clad barrier (i.e., RCS activity values) and IC MU4 for the RCS barrier (i.e., RCS leak rate values).
This threshold also applies to prolonged steam releases necessitated by operational considerations such as the forced steaming of a leaking or RUPTURED steam generator directly to atmosphere to cooldown the plant, or to drive an auxiliary (emergency) feed water pump. These types of conditions will result in a significant and sustained release of radioactive steam to the environment (and are thus similar to a FAUL TED condition).
The inability to isolate the steam flow without an adverse effect on plant cooldown meets the intent of a loss of containment.
Steam releases associated with the expected operation of a SG power operated relief valve or safety relief valve do not meet the intent of this threshold.
Such releases may occur intermittently for a short period oftime following a reactor trip as operators process through emergency operating procedures to bring the plant to a stable condition and prepare to initiate a plant cooldown.
Steam releases associated with the unexpected operation of a valve do meet this threshold.
Following an SG tube leak or rupture, there may be minor radiological releases through a secondary-side system component.
These types of releases do not constitute a loss or potential loss of containment but should be evaluated using the Recognition Category R I Cs. The emergency classification levels resulting from primary-to-secondary
- leakage, with or without a steam release from the FAULTED SG, are summarized below. 59 P-to-S Leak Rate Less than or equal to 25 gpm Greater than 25 gpm Requires operation of a second charging pump (RCS Barrier Potential Loss) Requires an automatic or manual SI actuation (RCS Barrier Loss) Affected SG is FAUL TED Outside of Containment?
Yes No classification Unusual Event per MU4 Site Area Emergency per FSl Site Area Emergency per FSl No No classification Unusual Event per MU4 Alert per F Al Alert per F Al There is no Potential Loss threshold associated with RCS or SG Tube Leakage.
- 2. Inadequate Heat Removal There is no Loss threshold associated with Inadequate Heat Removal.
Potential Loss 2.A This condition represents an IMMINENT core melt sequence which, if not corrected, could lead to vessel failure and an increased potential for containment failure.
For this condition to occur, there must already have been a loss of the RCS Barrier and the Fuel Clad Barrier.
If implementation of a procedure(s) to restore adequate core cooling is not effective (successful) within 15 minutes, it is assumed that the event trajectory will likely lead to core melting and a subsequent challenge of the Containment Barrier.
The restoration procedure is considered "effective" if core exit thermocouple readings are decreasing and/or if reactor vessel level is increasing.
Whether or not the procedure(s) will be effective should be apparent within 15 minutes.
The STED/SED should escalate the emergency classification level as soon as it is determined that the procedure(s) will not be effective.
Severe accident analyses have concluded that function restoration procedures can arrest core degradation in a significant fraction of core damage scenarios, and that the likelihood of containment failure is very small in these events. Given this, it is appropriate to provide 15 minutes beyond the required entry point to determine if procedural actions can reverse the core melt sequence.
- 3. RCS Activity I Containment Radiation There is no Loss threshold associated with RCS Activity I Containment Radiation.
Potential Loss 3 .A The radiation monitor reading corresponds to an instantaneous release of all reactor coolant mass into the containment, assuming that 20% of the fuel cladding has failed. This level of fuel clad failure is well above that used to determine the analogous Fuel Clad Barrier Loss and RCS Barrier Loss thresholds.
60 NUREG-1228, Source Estimations During Incident Response to Severe Nuclear Power Plant Accidents, indicates the fuel clad failure must be greater than approximately 20% in order for there to be a major release of radioactivity requiring offsite protective actions.
For this condition to exist, there must already have been a loss of the RCS Barrier and the Fuel Clad Barrier.
It is therefore prudent to treat this condition as a potential loss of containment which would then escalate the emergency classification level to a General Emergency.
- 4. Containment Integrity or Bypass Loss 4.A These thresholds address a situation where containment isolation is required and one of two conditions exists as discussed below. Users are reminded that there may be accident and release conditions that simultaneously meet both thresholds 4.A.1 and 4.A.2. 4.A.1 -Containment integrity has been lost, i.e., the actual containment atmospheric leak rate likely exceeds that associated with allowable leakage (or sometimes referred to as design leakage).
Following the release of RCS mass into containment, containment pressure will fluctuate based on a variety of factors; a loss of containment integrity condition may (or may not) be accompanied by a noticeable drop in containment pressure.
Recognizing the inherent difficulties in determining a containment leak rate during accident conditions, it is expected that the STED/SED will assess this threshold
. using judgment, and with due consideration given to current plant conditions, and available operational and radiological data. Following the leakage of RCS mass into containment and a rise in containment
- pressure, there may be minor radiological releases associated with allowable (design) containment leakage through various penetrations or system components.
These releases do not constitute a loss or potential loss of containment but should be evaluated using the Recognition Category R ICs. 4.A.2 -Conditions are such that there is an UNISOLABLE pathway for the migration of radioactive material from the containment atmosphere to the environment.
As used here, the term "environment" includes the atmosphere of a room or area, outside the containment, that may, in turn, communicate with the outside-the-plant atmosphere Depending upon a variety of factors, this condition may or may i:iot be accompanied by a noticeable drop in containment pressure.
The existence of a filter is not considered in the threshold assessment.
Filters do not remove fission product noble gases. In addition, a filter could become ineffective due to iodine and/or particulate loading beyond design limits (i.e., retention ability has been exceeded) or water saturation from steam/high humidity in the release streani.
Leakage between two interfacing liquid systems, by itself, does not meet this threshold.
Following the leakage of RCS mass into containment and a rise in containment
- pressure, there may be minor radiological releases associated with allowable (design) containment leakage through various penetrations or system components.
Minor releases may also occur if a containment isolation valve(s) fails to close but the containment atmosphere escapes to a closed system. These releases do not constitute a loss or potential loss of containment but should be evaluated using the Recognition Category RI Cs. The status of the containment barrier during an event involving steam generator tube leakage is assessed using Loss Threshold I .A. 61 Loss 4.B Containment sump, temperature, pressure and/or radiation levels will increase ifreactor coolant mass is leaking into the containment.
If these parameters have not increased, then the reactor coolant mass may be leaking outside of containment (i.e., a containment bypass sequence).
Increases in sump, temperature,
- pressure, flow and/or radiation level readings outside of the containment may indicate that the RCS mass is being lost outside of containment.
Unexpected elevated readings and alarms on radiation monitors with detectors outside containment should be corroborated with other available indications to confirm that the source is a loss of RCS mass outside of containment.
If the fuel clad barrier has not been lost, radiation monitor readings outside of containment may not increase significantly;
- however, other unexpected changes in sump levels, area temperatures or pressures, flow rates, etc. should be sufficient to determine if RCS mass is being lost outside of the containment.
To ensure proper escalation of the emergency classification, the RCS leakage outside of containment must be related to the mass loss that is causing the RCS Loss and/or Potential Loss threshold I .A to be met. Potential Loss 4.A If containment pressure exceeds the design pressure, there exists a potential to lose the Containment Barrier.
To reach this level, there must be an inadequate core cooling condition for an extended period of time; therefore, the RCS and Fuel Clad barriers would already be lost. Thus, this threshold is a discriminator between a Site Area Emergency and General Emergency since there is now a potential to lose the third barrier.
Potential Loss 4.B The existence of an explosive mixture means, at a minimum, that the containment atmospheric hydrogen concentration is sufficient to support a hydrogen burn (i.e., at the lower deflagration limit). A hydrogen burn will raise containment pressure and could result in collateral equipment damage leading to a loss of containment integrity.
It therefore represents a potential loss of the Containment Barrier.
Potential Loss 4.C This threshold describes a condition where containment pressure is greater than the setpoint at which containment energy (heat) removal systems are designed to automatically
- actuate, and less than one full train of equipment is capable of operating per design. The 15-minute criterion is included to allow operators time to manually start equipment that may not have automatically
- started, if possible.
This threshold represents a potential loss of containment in that containment heat removal/depressurization systems are either lost or performing in a degraded manner. 5. STED/SED Judgment Loss 5.A This threshold addresses any other factors that may be used by the STED/SED in determining whether the Containment Barrier is lost. Potential Loss 5 .A 62 This threshold addresses any other factors that may be used by the STED/SED in determining whether the Containment Barrier is potentially lost. The STED/SED should also consider whether or not to declare the barrier potentially lost in the event that barrier status cannot be monitored.
63 7 HAZARDS AND OTHER CONDITIONS AFFECTING PLANT SAFETY ICS/EALS Recognition Category "H" Initiating Condition Matrix GENERAL SITE AREA ALERT UNUSUAL EVENT EMERGENCY EMERGENCY HSl HOSTILE ACTION HAl HOSTILE ACTION HUl Confinned within the PROTECTED within the OWNER SECURITY CONDITION or AREA. CONTROLLED AREA or threat. Op. Modes: All airborne attack threat within Op. Modes: All 30 minutes.
Op. Modes: All HU2 Seismic event greater than OBE levels. Op. Modes: All HU3 Hazardous event. Op. Modes: All HU4 FIRE potentially degrading the level of safety of the plant. Op. Modes: All HA5 Gaseous release impeding access to equipment necessary for normal plant operations, shutdown or cooldown.
Op. Modes: All HS6 Inability to control a HA6 Control Room key safety function from evacuation resulting in outside the Control Room. transfer of plant control to Op. Modes: All alternate locations.
Op. Modes: All HG7 Other conditions HS7 Other conditions HA7 Other conditions HU7 Other conditions exist which in the judgment exist which in the judgment exist which in the judgment exist which in the judgment of the STED/SED warrant of the STED/SED warrant of the STED/SED warrant of the STED/SED warrant declaration of a General declaration of a Site Area declaration of an Alert. declaration of an Unusual Emergency.
Emergency.
Op. Modes: All Event. Op. Modes: All Op. Modes: All Op. Modes: All 64 Page intentionally left blank 65 HG7 ECL: General Emergency Initiating Condition:
Other conditions exist which in the judgment of the STED/SED warrant declaration of a General Emergency.
Operating Mode Applicability:
All Emergency Action Levels: (1) Other conditions exist which in the judgment of the STED/SED indicate that events are in progress or have occurred which involve actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity or HOSTILE ACTION that results in an actual loss of physical control of the facility.
Releases can be reasonably expected to exceed EPA Protective Action Guideline exposure levels offsite for more than the immediate site area. Basis: This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for a General Emergency.
66 HS1 ECL: Site Area Emergency Initiating Condition:
HOSTILE ACTION within the PROTECTED AREA. Operating Mode Applicability:
All Emergency Action Levels: Note: This Initiating Condition and EAL do not apply to an attack solely on the Dry Fuel Storage Protected Area. An attack on the Dry Fuel Storage Facility Protected Area should be considered an attack within the Owner Controlled Area and classified as an Alert per Initiating Condition HAI. (1) A HOSTILE ACTION is occurring or has occurred within the PROTECTED AREA as reported by security shift supervision Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. This IC addresses the occurrence of a HOSTILE ACTION within the PROTECTED AREA. This event will require rapid response and assistance due to the possibility for damage to plant equipment.
Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Security plans and terminology are based on the guidance provided by NEI 03-I2, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program}.
As time and conditions allow, these events require a heightened state of readiness by the plant staff and implementation of onsite protective measures.
The Site Area Emergency declaration will mobilize ORO resources and have them available to develop and implement public protective actions in the unlikely event that the attack is successful in impairing multiple safety functions.
This IC does not apply to a HOSTILE ACTION directed at an ISFSI PROTECTED AREA located outside the plant PROTECTED AREA; such an attack should be assessed using IC HAI. It also does not apply to incidents that are accidental events, acts of civil disobedience, or otherwise are not a HOSTILE ACTION perpetrated by a HOSTILE FORCE. Examples include the crash of a small aircraft, shots from hunters, physical disputes between employees, etc. Reporting of these types of events is adequately addressed by other EALs, or the requirements of IO CFR § 73.7I or IO CFR § 50.72. 67 Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information.
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location.
Security-sensitive information should be contained in non-public documents such as the Security Plan. Escalation of the emergency classification level would be via IC HG7. 68 HS6 ECL: Site Area Emergency Initiating Condition:
Inability to control a key safety function from outside the Control Room. Operating Mode Applicability:
All Emergency Action Levels: Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Basis: a. AND An event has resulted in plant control being transferred from the Control Room to the Remote Safe Shutdown components.
- b. Control of ANY of the following key safety functions is not reestablished within 15 minutes.
Reactivity control Core cooling RCS heat removal This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations, and the control of a key safety function cannot be reestablished in a timely manner. The failure to gain control of a key safety function following a transfer of plant control to alternate locations is a precursor to a challenge to one or more fission product barriers within a relatively short period of time. The determination of whether or not "control" is established at the remote safe shutdown location(s) is based on STED/SED judgment.
The STED/SED is expected to make a reasonable, informed judgment within 15 minutes whether or not the operating staff has control of key safety functions from the remote safe shutdown location(s).
Escalation of the emergency classification level would be via IC FG 1 or CG 1. 69 HS7 ECL: Site Area Emergency Initiating Condition:
Other conditions exist which in the judgment of the STED/SED warrant declaration of a Site Area Emergency.
Operating Mode Applicability:
All Emergency Action Levels: (1) Other conditions exist which in the judgment of the STED/SED indicate that events are in progress or have occurred which involve actual or likely major failures of plant functions needed for protection of the public or HOSTILE ACTION that results in intentional damage or malicious acts, (1) toward site personnel or equipment that could lead to the likely failure of or, (2) that prevent effective access to equipment needed for the protection of the public. Any releases are not expected to result in exposure levels which exceed EPA Protective Action Guideline exposure levels beyond the site boundary.
Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for a Site Area Emergency.
70 HA1 ECL: Alert Initiating Condition:
HOSTILE ACTION within the OWNER CONTROLLED AREA or airborne attack threat within 30 minutes.
Operating Mode Applicability:
All Emergency Action Levels: (1 or 2) (1) A HOSTILE ACTION is occurring or has occurred within the OWNER CONTROLLED AREA or the Dry Fuel Storage Facility as reported by security shift supervision.
OR (2) A validated notification from NRC of an aircraft attack threat within 30 minutes of the site. Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. OWNER CONTROLLED AREA: The site property owned by, or otherwise under the control of, the licensee.
This IC addresses the occurrence of a HOSTILE ACTION within the OWNER CONTROLLED AREA or notification of an aircraft attack threat. This event will require rapid response and assistance due to the possibility of the attack progressing to the PROTECTED AREA, or the need to prepare the plant and staff for a potential aircraft impact. Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Security plans and terminology are based on the guidance provided by NEI 03-12, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program}.
As time and conditions allow, these events require a heightened state ofreadiness by the plant staff and implementation of onsite protective measures.
The Alert declaration will also heighten the awareness of Offsite Response Organizations, allowing them to be better prepared should it be necessary to consider further actions.
This IC does not apply to incidents that are accidental events, acts of civil disobedience, or otherwise are not a HOSTILE ACTION perpetrated by a HOSTILE FORCE. Examples include the crash of a small aircraft, shots from hunters, physical disputes between employees, etc. Reporting of these types of events is adequately addressed by other EALs, or the requirements of 10 CFR § 73.71or10 CFR § 50.72. EAL #1 is applicable for any HOSTILE ACTION occurring, or that has occurred, in the OWNER CONTROLLED AREA. This includes any action directed against an ISFSI that is located outside the plant PROTECTED AREA. 71 EAL #2 addresses the threat from the impact of an aircraft on the plant, and the anticipated arrival time is within 30 minutes.
The intent of this EAL is to ensure that threat-related notifications are made in a timely manner so that plant personnel and OROs are in a heightened state ofreadiness.
This EAL is met when the threat-related information has been validated in accordance with site procedures.
The NRC Headquarters Operations Officer (HOO) will communicate to the licensee ifthe threat involves an aircraft.
The status and size of the plane may be provided by NORAD through the NRC. In some cases, it may not be readily apparent if an aircraft impact within the OWNER CONTROLLED AREA was intentional (i.e., a HOSTILE ACTION).
It is expected, although not certain, that notification by an appropriate Federal agency to the site would clarify this point. In this case, the appropriate federal agency is intended to be NORAD, FBI, FAA or NRC. The emergency declaration, including one based on other ICs/EALs, should not be unduly delayed while awaiting notification by a Federal agency. Escalation of the emergency classification level would be via IC HSI. 72 HAS ECL: Alert Initiating Condition:
Gaseous release impeding access to equipment necessary for normal plant operations, shutdown or cooldown.
Operating Mode Applicability:
All Emergency Action Levels: Note: If the equipment in the listed room or area was already inoperable or out-of-service before the event occurred, then no emergency classification is warranted.
(1) Basis: a. AND Release of a toxic, corrosive, asphyxiant or flammable gas into any Table Hl rooms or areas. b. Entry into the room or area is prohibited or IMPEDED.
Table Hl Area Mode Primary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation
-26 ft elevation Turbine Building 21 ft elevation 1, 2, 3 50 ft elevation Essential Switchgear Rooms 1, 2, 3, 4 Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation Containment 3, 4 RHR/CBS Equipment Vaults 3,4 IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses an event involving a release of a hazardous gas that precludes or impedes access to equipment necessary to maintain normal plant operation, or required for a normal plant cooldown and shutdown.
This condition represents an actual or potential substantial degradation of the level of safety of the plant. An Alert declaration is warranted if entry into the affected room/area is, or may be, procedurally required during the plant operating mode in effect at the time of the gaseous release.
The 73 emergency classification is not contingent upon whether entry is actually necessary at the time of the release.
Evaluation of the IC and EAL do not require atmospheric sampling; it only requires the STED/SED'sjudgment that the gas concentration in the affected room/area is sufficient to preclude or significantly impede procedurally required access. This judgment may be based on a variety of factors including an existing job hazard analysis, report of ill effects on personnel, advice from a subject matter expert or operating experience with the same or similar hazards.
Access should be considered as impeded if extraordinary measures are necessary to facilitate entry of personnel into the affected room/area.
An emergency declaration is not warranted if any of the following conditions apply.
- The plant is in an operating mode different than the mode specified for the affected room/area (i.e., entry is not required during the operating mode in effect at the time of the gaseous release).
For example, the plant is in Mode 1 when the gaseous release occurs, and the procedures used for normal operation, cooldown and shutdown do not require entry into the affected room until Mode 4.
- The gas release is a planned activity that includes compensatory measures which address the temporary inaccessibility of a room or area.
- The action for which room/area entry is required is of an administrative or record keeping nature.
- The access control measures are of a conservative or precautionary nature, and would not actually prevent or impede a required action. An asphyxiant is a gas capable of reducing the level of oxygen in the body to dangerous levels. Most commonly, asphyxiants work by merely displacing air in an enclosed environment.
This reduces the concentration of oxygen below the normal level of around 19%, which can lead to breathing difficulties, unconsciousness or even death. This EAL does not apply to firefighting activities that automatically or manually activate a fire suppression system in an area. Escalation of the emergency classification level would be via Recognition Category R, C or F I Cs.
References:
OSl000.03, Plant Shutdown From Minimum Load to Hot Standby OSl000.04, Plant Cooldown From Hot Standby to Cold Shutdown 74 HA6 ECL: Alert Initiating Condition:
Control Room evacuation resulting in transfer of plant control to alternate locations.
Operating Mode Applicability:
All Emergency Action Levels: (1) Entry into Procedure OS1200.02 for control room evacuation resulted in plant control being transferred from the Control Room to Remote Safe Shutdown components.
Basis: This IC addresses an evacuation of the Control Room that results in transfer of plant control to alternate locations outside the Control Room. The loss of the ability to control the plant from the Control Room is considered to be a potential substantial degradation in the level of plant safety. Following a Control Room evacuation, control of the plant will be transferred to alternate shutdown locations.
The necessity to control a plant shutdown from outside the Control Room, in addition to responding to the event that required the evacuation of the Control Room, will present challenges to plant operators and other on-shift personnel.
Activation of the ERO and emergency response facilities will assist in responding to these challenges.
Escalation of the emergency classification level would be via IC HS6. 75 HA7 ECL: Alert Initiating Condition:
Other conditions exist which in the judgment of the STED/SED warrant declaration of an Alert. Operating Mode Applicability:
All Emergency Action Levels: (1) Other conditions exist which, in the judgment of the STED/SED, indicate that events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA Protective Action Guideline exposure levels. Basis: HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for an Alert. 76 HU1 ECL: Notification of Unusual Event Initiating Condition:
Confirmed SECURITY CONDITION or threat. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3) (1) A Code Yellow is reported by the Security Shift Supervisor.
OR (2) Notification of a credible security threat directed at Seabrook Station.
OR (3) A validated notification from the NRC providing information of an aircraft threat. Basis: Code Yellow -SECURITY CONDITION:
Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. This IC addresses events that pose a threat to plant personnel or SAFETY SYSTEM equipment, and thus represent a potential degradation in the level of plant safety. Security events which do not meet one of these EALs are adequately addressed by the requirements of IO CFR § 73.7I or IO CFR § 50.72. Security events assessed as HOSTILE ACTIONS are classifiable under ICs HAI, HSI and HGI. Timely and accurate communications between Security Shift Supervision and the Control Room is essential for proper classification of a security-related event. Classification of these events will initiate appropriate threat-related notifications to plant personnel and OROs. Security plans and terminology are based on the guidance provided by NEI 03-I 2, Template for the Security Plan, Training and Qualification Plan, Safeguards Contingency Plan [and Independent Spent Fuel Storage Installation Security Program].
EAL # 1 references Security Shift Supervisor because these are the individuals trained to confirm that a security event is occurring or has occurred.
Training on security event confirmation and classification is controlled due to the nature of Safeguards and I 0 CFR § 2.390 information.
EAL #2 addresses the receipt of a credible security threat. The credibility of the threat is assessed in accordance with site procedures.
EAL #3 addresses the threat from the impact of an aircraft on the plant. The NRC Headquarters Operations Officer (HOO) will communicate to the licensee ifthe threat involves an aircraft.
The status and size of the plane may also be provided by NORAD through the NRC. Validation 77 of the threat is performed in accordance with site procedures.
Emergency plans and implementing procedures are public documents; therefore, EALs should not incorporate Security-sensitive information.
This includes information that may be advantageous to a potential adversary, such as the particulars concerning a specific threat or threat location.
Security-sensitive information should be contained in non-public documents such as the Security Plan. Escalation of the emergency classification level would be via IC HAL
References:
OS1290.03, Response to a Security Event. OS1290.04, Response to an Airborne Security Event 78 I . ' ' HU2 ECL: Notification of Unusual Event Initiating Condition:
Seismic event greater than OBE levels. Operating Mode Applicability:
All Emergency Action Levels: (1) Seismic event greater than Operating Basis Earthquake (OBE) as indicated by: a. The red "EVENT" light is lit on seismic monitoring control panel 1-SM-CP-58.
OR (2) Basis: AND b. The yellow "OBE" light is lit on seismic monitoring control panel l-SM-CP-58.
- a. Seismic monitoring system out of service AND b. Control Room personnel feel an actual or potential seismic event AND c. The occurrence of a seismic event is confirmed in a manner deemed appropriate by the Shift Manager This IC addresses a seismic event that results in accelerations at the plant site greater than those specified for an Operating Basis Earthquake (OBE). An earthquake greater than an OBE but less than a Safe Shutdown Earthquake (SSE) should have no significant impact on safety-related
- systems, structures and components;
- however, some time may be required for the plant staff to ascertain the actual post-event condition of the plant. Given the time necessary to perform downs and inspections, and fully understand any impacts, this event represents a potential degradation of the level of safety of the plant. Event verification with external sources should not be necessary during or following an OBE. Earthquakes of this magnitude should be readily felt by on-site personnel and recognized as a seismic event. The Shift Manager or STED/SED may seek external verification if deemed appropriate;
- however, the verification action must not preclude a timely emergency declaration.
Reference:
EC 282184, Seismic Monitoring System Upgrade Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 79 HU3 ECL: Notification of Unusual Event Initiating Condition:
Hazardous event. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3 or 4) Note: EAL #4 does not apply to routine traffic impediments such as fog, snow, ice, or vehicle breakdowns or accidents.
(1) A tornado strike within the PROTECTED AREA. OR (2) Internal room or area flooding of a magnitude sufficient to require manual or automatic electrical isolation of a SAFETY SYSTEM component needed for the current operating mode. OR (3) Movement of personnel within the PROTECTED AREA is IMPEDED due to an offsite event involving hazardous materials.
OR (4) A hazardous event that results in on-site conditions sufficient to prohibit the plant staff from accessing the site via personal vehicles.
Basis: PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related.
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. This IC addresses hazardous events that are considered to represent a potential degradation of the level of safety of the plant. EAL #1 addresses a tornado striking (touching down) within the Protected Area. EAL #2 addresses flooding of a building room or area that results in operators isolating power to a SAFETY SYSTEM component due to water level or other wetting concerns.
Classification is also required if the water level or related wetting causes an automatic isolation of a SAFETY SYSTEM component from its power source. To warrant classification, operability of the affected component must be required by Technical Specifications for the current operating mode. EAL #3 addresses a hazardous materials event originating at an off site location and of sufficient magnitude to impede the movement of personnel within the PROTECTED AREA. 80 EAL #4 addresses a hazardous event that causes an on-site impediment to vehicle movement and significant enough to prohibit the plant staff from accessing the site using personal vehicles.
Examples of such an event include site flooding caused by a hurricane, heavy rains, up-river water releases, dam failure, etc., or an on-site train derailment blocking the access road. This EAL is not intended apply to routine impediments such as fog, snow, ice, or vehicle breakdowns or accidents, but rather to more significant conditions such as the Hurricane Andrew strike on Turkey Point in 1992, the flooding around the Cooper Station during the Midwest floods of 1993, or the flooding around Ft. Calhoun Station in 2011. Escalation of the emergency classification level would be based on ICs in Recognition Categories A, F, Mor C. 81 ECL: Notification of Unusual Event Initiating Condition:
FIRE potentially degrading the level of safety of the plant. Operating Mode Applicability:
All Emergency Action Levels: (1 or 2 or 3 or 4) Notes: HU4
- The STED/SED should declare the Unusual Event promptly upon determining that the applicable time has been exceeded, or will likely be exceeded.
- A containment fire alarm is considered valid upon receipt of multiple zones (more than 1) actuated on CP-376 panel. (1) OR a. AND A FIRE is NOT extinguished within 15-minutes of ANY of the following FIRE detection indications:
Report from the field (i.e., visual observation)
Receipt of multiple (more than 1) fire alarms or indications Field verification of a single fire alarm b. The FIRE is located within ANY Table H2 plant rooms or areas: Table H2 Condensate Storage Tank Enclosure Fuel Storage Building Containment Primary Auxiliary Building Control Building Service Water Pump House Cooling Tower Steam and Feedwater Pipe Chases Diesel Generator Building North Tank Farm Emergency Feedwater Pump House Startup Feedwater Pump Area RHR/CBS Equipment Vaults (2) a. Receipt of a single fire alarm (i.e., no other indications of a FIRE). OR AND b. The FIRE is located within ANY of the Table H2 plant rooms or areas except Containment in Modes 1 and 2 (see note above): AND c. The existence of a FIRE is not verified within 30-minutes of alarm receipt.
(3) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility not extinguished within 60-minutes of the initial report, alarm or indication.
OR (4) A FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility that requires firefighting support by an offsite fire response agency to extinguish.
82 Basis: FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed.
PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. This IC addresses the magnitude and extent of FIRES that may be indicative of a potential degradation of the level of safety of the plant. With regard to containment fire alarms, there is constant air movement in containment due to the operation of the CAH system. The operating cooling units are drawing air to the units past the smoke detectors.
It can reasonably be expected that a fire that burns for 15 minutes would produce sufficient products of combustion to cause fire detectors in multiple zones to alarm. EAL#l The intent of the 15-minute duration is to size the FIRE and to discriminate against small FIRES that are readily extinguished.
In addition to alarms, other indications of a FIRE could be a drop in fire main pressure, automatic activation of a suppression system, etc. Upon receipt, operators will take prompt actions to confirm the validity of an initial fire alarm, indication, or report. For EAL assessment purposes, the emergency declaration clock starts at the time that the initial alarm, indication, or report was received, and not the time that a subsequent verification action was performed.
Similarly, the fire duration clock also starts at the time of receipt of the initial alarm, indication or report. EAL#2 This EAL addresses receipt of a single fire alarm, and the existence of a FIRE is not verified (i.e., proved or disproved) within 30-minutes of the alarm. Upon receipt, operators will take prompt actions to confirm the validity of a single fire alarm. For EAL assessment
- purposes, the 30-minute clock starts at the time that the initial alarm was received, and not the time that a subsequent verification action was performed.
A single fire alarm, absent other indication(s) of a FIRE, may be indicative of equipment failure or a spurious activation, and not an actual FIRE. For this reason, additional time is allowed to verify the validity of the alarm. The 30-minute period is a reasonable amount of time to determine if an actual FIRE exists; however, after that time, and absent information to the contrary, it is assumed that an actual FIRE is in progress.
If an actual FIRE is verified by a report from the field, then EAL #1 is immediately applicable, and the emergency must be declared ifthe FIRE is not extinguished within 15-minutes of the report. If the alarm is verified to be due to an equipment failure or a spurious activation, and this verification occurs within 30-minutes of the receipt of the alarm, then this EAL is not applicable and no emergency declaration is warranted.
EAL#3 In addition to a FIRE addressed by EAL #1 or EAL #2, a FIRE within the plant PROTECTED AREA not extinguished within 60-minutes may also potentially degrade the level of plant safety. This basis extends to a FIRE occurring within the PROTECTED AREA or the Dry Fuel Storage Facility.
83 EAL#4 If a FIRE within the plant PROTECTED AREA or Dry Fuel Storage Facility is of sufficient size to require a response by an off site firefighting agency, then the level of plant safety is potentially degraded.
The dispatch of an offsite firefighting agency to the site requires an emergency declaration only if it is needed to actively support firefighting efforts because the fire is beyond the capability of the Fire Brigade to extinguish.
Declaration is not necessary if the agency resources are placed on stand-by, or supporting post-extinguishment recovery or investigation actions.
Basis-Related Requirements from Appendix R Appendix R to 10 CFR 50, states in part: Criterion 3 of Appendix A to this part specifies that "Structures,
- systems, and components important to safety shall be designed and located to minimize, consistent with other safety requirements, the probability and effect of fires and explosions."
When considering the effects of fire, those systems associated with achieving and maintaining safe shutdown conditions assume major importance to safety because damage to them can lead to core damage resulting from loss of coolant through boil-off.
Because fire may affect safe shutdown systems and because the loss of function of systems used to mitigate the consequences of design basis accidents under post-fire conditions does not per se impact public safety, the need to limit fire damage to systems required to achieve and maintain safe shutdown conditions is greater than the need to limit fire damage to those systems required to mitigate the consequences of design basis accidents.
In addition, Appendix R to 10 CFR 50, requires, among other considerations, the use of 1-hour fire barriers for the enclosure of cable and equipment and associated non-safety circuits of one redundant train (G.2.c).
As used in EAL #2, the 30-minutes to verify a single alarm is well within this worst-case 1-hour time period. Depending upon the plant mode at the time of the event, escalation of the emergency classification level would be via IC CA6 or MA9. 84 I I HU7 ECL: Notification of Unusual Event Initiating Condition:
Other conditions exist which in the judgment of the STED/SED warrant declaration of an Unusual Event. Operating Mode Applicability:
All Emergency Action Levels: (1) Other conditions exist which in the judgment of the STED/SED indicate that events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been initiated.
No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. Basis: This IC addresses unanticipated conditions not addressed explicitly elsewhere but that warrant declaration of an emergency because conditions exist which are believed by the STED/SED to fall under the emergency classification level description for a NOUE. 85 8 SYSTEM MALFUNCTION ICS/EALS Recognition Category "M" Initiating Condition Matrix GENERAL EMERGENCY SITE AREA EMERGENCY ALERT UNUSUAL EVENT MGl Prolonged loss of all MSl Loss of all offsite and MAI Loss of all but one MUI Loss of all offsite AC offsite and all onsite AC all onsite AC power to AC power source to power capability to emergency power to emergency buses. emergency buses for 15 emergency buses for 15 buses for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 minutes or longer. minutes or longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA2 UNPLANNED loss MU2 UNPLANNED loss of Control Room indications of Control Room indications for 15 minutes or longer with a for 15 minutes or longer. significant transient in Op. Modes: 1, 2, 3, 4 progress.
Op. Modes: 1, 2, 3, 4 MU3 Reactor coolant activity greater than Technical Specification allowable limits. Op. Modes: 1, 2, 3, 4 MU4 RCS leakage for 15 minutes or longer. Op. Modes: 1, 2, 3, 4 MSS Inability to shutdown MAS Automatic or manual MUS Automatic or manual the reactor causing a trip fails to shutdown the trip fails to shutdown the challenge to core cooling or reactor and subsequent reactor.
RCS heat removal.
manual actions taken at the Op. Modes: 1 Op. Modes: 1 Main Control Board are not successful in shutting down the reactor.
Op. Modes: 1 MU6 Loss of all onsite or offsite communications capabilities.
Op. Modes: 1, 2, 3, 4 MU7 Failure to isolate containment or loss of containment pressure control.
Op. Modes: 1, 2, 3, 4 MGS Loss of all AC and MSS Loss of all Vital DC Vital DC power sources for 15 power for 15 minutes or minutes or longer. longer. Op. Modes: 1, 2, 3, 4 Op. Modes: 1, 2, 3, 4 MA9 Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Op. Modes: 1, 2, 3, 4 86 MG1 ECL: General Emergency Initiating Condition:
Prolonged loss of all offsite and all onsite AC power to emergency buses. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Notes: (1)
- The STED/SED should declare the General Emergency promptly upon determining that 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> has been exceeded, or will likely be exceeded.
- For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional.
- b. ANY of the following:
Restoration of at least one AC emer enc bus in less than 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> is not likel Core Coolin C CSF RED ent Basis: This IC addresses a prolonged loss of all power sources to AC emergency buses. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure
- control, spent fuel heat removal and the ultimate heat sink. A prolonged loss of these buses will lead to a loss of one or more fission product barriers.
In addition, fission product barrier monitoring capabilities may be degraded under these conditions.
The EAL should require declaration of a General Emergency prior to meeting the thresholds for IC FG 1. This will allow additional time for implementation of offsite protective actions.
Escalation of the emergency classification from Site Area Emergency will occur if it is projected that power cannot be restored to at least one AC emergency bus by the end of the analyzed station blackout coping period. Beyond this time, plant responses and event trajectory are subject to greater uncertainty, and there is an increased likelihood of challenges to multiple fission product barriers.
The estimate for restoring at least one emergency bus should be based on a realistic appraisal of the situation.
Mitigation actions with a low probability of success should not be used as a basis for delaying a classification upgrade.
The goal is to maximize the time available to prepare for, and implement, protective actions for the public. The EAL will also require a General Emergency declaration if the loss of AC power results in parameters that indicate an inability to adequately remove decay heat from the core. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to 87 start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures
Reference:
UFSAR Section 8.3.1, AC Power Systems 88 MG8 ECL: General Emergency Initiating Condition:
Loss of all AC and Vital DC power sources for lS minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Note:
- The STED/SED should declare the General Emergency promptly upon determining that 1 S minutes has been exceeded, or will likely be exceeded.
- For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional.
(1) a. Loss of ALL offsite and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for l S minutes or longer. Basis: AND b. Indicated voltage is less than 1 OS V on ALL Vital DC buses l lA, 1 lB, 11 C and 1 lD for lS minutes or longer. This IC addresses a concurrent and prolonged loss of both AC and Vital DC power. A loss of all AC power compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure
- control, spent fuel heat removal and the ultimate heat sink. A loss of Vital DC power compromises the ability to monitor and control SAFETY SYSTEMS.
A sustained loss of both AC and DC power will lead to multiple challenges to fission product barriers.
Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. The lS-minute emergency declaration clock begins at the point when both EAL thresholds are met. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, Cl, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically 89
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures
Reference:
UFSAR Section 8.3.1, AC Power Systems 90 MS1 ECL: Site Area Emergency Initiating Condition:
Loss of all offsite and all onsite AC power to emergency buses for lS minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Note:
- The STED/SED should declare the Site Area Emergency promptly upon determining that l S minutes has been exceeded, or will likely be exceeded.
- For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional.
(1) Loss of ALL off site and ALL onsite AC power to BOTH AC emergency buses ES AND E6 for 1 S minutes or longer. Basis: This IC addresses a total loss of AC power that compromises the performance of all SAFETY SYSTEMS requiring electric power including those necessary for emergency core cooling, containment heat removal/pressure
- control, spent fuel heat removal and the ultimate heat sink. In addition, fission product barrier monitoring capabilities may be degraded under these conditions.
This IC represents a condition that involves actual or likely major failures of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via I Cs RG 1, FG 1 or MG 1. This Initiating Condition is not met if either Bus ES or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-S (ES) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of off site power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design 91 requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures
Reference:
UFSAR Section 8.3.1, AC Power Systems 92 MSS ECL: Site Area Emergency Initiating Condition:
Inability to shutdown the reactor causing a challenge to core cooling or RCS heat removal.
Operating Mode Applicability:
1 Emergency Action Levels: (1) a. AND b. AND c. Basis: An automatic or manual trip did not shutdown the reactor.
All manual actions to shutdown the reactor have been unsuccessful.
EITHER of the following conditions exist: Core Coolin C CSF RED entr conditions met. Heat Sink H CSF RED entr conditions met. This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, all subsequent operator actions to manually shutdown the reactor are unsuccessful, and continued power generation is challenging the capability to adequately remove heat from the core and/or the RCS. This condition will lead to fuel damage if additional mitigation actions are unsuccessful and thus warrants the declaration of a Site Area Emergency.
In some instances, the emergency classification resulting from this IC/EAL may be higher than that resulting from an assessment of the plant responses and symptoms against the Recognition Category F ICs/EALs.
This is appropriate in that the Recognition Category F ICs/EALs do not address the additional threat posed by a failure to shutdown the reactor.
The inclusion of this IC and EAL ensures the timely declaration of a Site Area Emergency in response to prolonged failure to shutdown the reactor.
A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria.
Escalation of the emergency classification level would be via IC RG 1 or FG 1. 93 MS8 ECL: Site Area Emergency Initiating Condition:
Loss of all Vital DC power for 15 minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Site Area Emergency promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Indicated voltage is less than 105V on ALL vital DC buses 1 lA, 1 lB, 11 C and 1 lD buses for 15 minutes or longer. Basis: This IC addresses a loss of Vital DC power which compromises the ability to monitor and control SAFETY SYSTEMS.
In modes above Cold Shutdown, this condition involves a major failure of plant functions needed for the protection of the public. Fifteen minutes was selected as a threshold to exclude transient or momentary power losses. Escalation of the emergency classification level would be via ICs RG 1, FG 1 or MG8. 94 MA1 ECL: Alert Initiating Condition:
Loss of all but one AC power source to emergency buses for 15 minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Notes:
- The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
- For a bus to be considered energized from SEPS, both SEPS diesel generator sets must be functional.
- 1) a AC power capability to BOTH AC emergency buses E5 AND E6 is reduced to a single power source for 15 minutes or longer. AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS.
Basis: NOTE There are six power sources to consider:
- 345 kV offsite power line 369
- 345 kV offsite power line 363
- 345 kV offsite power line 394
- SEPS. For SEPS to be considered available, both SEPS diesel generator sets must be functional SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related.
This IC describes a significant degradation of offsite and onsite AC power sources such that any additional single failure would result in a loss of all AC power to SAFETY SYSTEMS.
In this condition, the sole AC power source may be powering one, or more than one, train of related equipment.
This IC provides an escalation path from IC MUI. An "AC power source" is a source recognized in AOPs and EOPs, and capable of supplying required power to an emergency bus. Some examples of this condition are presented below.
- A loss of all offsite power with a concurrent failure of all but one emergency power source. 95
- A loss of all offsite power and loss of all emergency power sources with a single train of emergency buses being back-fed from the unit main generator.
- A loss of emergency power sources with a single train of emergency buses being back-fed from an offsite power source. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of power. Escalation of the emergency classification level would be via IC MS 1. This Initiating Condition is not met if either Bus E5 or E6 is energized from the Supplemental Emergency Power System (SEPS). The SEPS primary function is to supply power to one 4.16 kV emergency bus, EDE-SWG-5 (E5) or EDE-SWG-6 (E6), in the event of a loss-of-offsite-power (LOOP) and both EDGs fail to start and load. In addition (SEPS) provides back up power to the emergency buses when one of the emergency diesel generators (EDG) is out of service for up to fourteen days. SEPS can be used when it is anticipated that one of the EDGs will be inoperable for longer than the technical specification allowable outage time (AOT) of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />. The design of the SEPS is capable of providing the required safety-related loads in the event of a loss of offsite power if both emergency diesel generators fail to start and load. During these events it is assumed that there is no seismic event or an event that requires safeguards actuation (SI, CBS, CVI, CI, etc.). In addition to providing power to the required loads, the total combined output of the SEPS system can supply either the RHR pump or the SI pump and one set of pressurizer heaters.
These design conditions are based on Probabilistic Risk Evaluation (PRA) EE-03-007.
The SEPS consists of two 4.16 kV generators which use diesel fuel engines as the prime mover. The generator sets (gensets)
SEPS-DG-2-A and SEPS-DG-2-B are capable of automatically
- starting, synchronizing together and energizing the SEPS electrical bus. The SEPS design requires a "dead bus" transfer back to an offsite power source, i.e., the emergency bus powered by SEPS must be de-energized before restoring offsite power. For power restoration from the SEPS, both SEPS diesel generator sets must be functional.
Both SEPS engines are required to power the emergency bus and equipment required to maintain core cooling.
The use of the SEPS is recognized in the Emergency Operating Procedures
Reference:
UFSAR Section 8.3.1, AC Power Systems 96 MA2 ECL: Alert Initiating Condition:
UNPLANNED loss of Control Room indications for 15 minutes or longer with a significant transient in progress.
Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Alert promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Basis: a. AND An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow b. ANY of the following transient events in progress.
Automatic or manual runback greater than 25% thermal reactor power Electrical load rejection greater than 25% full electrical load Reactor trip SI actuation UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses the difficulty associated with monitoring rapidly changing plant conditions during a transient without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. During this condition, the margin to a potential fission product barrier challenge is reduced.
It thus represents a potential substantial degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s).
For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required.
The event would be reported if it significantly impaired the capability to perform emergency assessments.
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency 97 plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making.
This EAL is focused on a selected subset of plant parameters associated with the key safety functions of reactivity
- control, core cooling and RCS heat removal.
The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition.
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter values may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation of the emergency classification level would be via ICs FSl or IC RSI. 98 MAS ECL: Alert Initiating Condition:
Automatic or manual trip fails to shutdown the reactor, and subsequent manual actions taken at the Main Control Board are not successful in shutting down the reactor.
Operating Mode Applicability:
1 Emergency Action Level: Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies.
(1) a. An automatic or manual trip did not shutdown the reactor.
AND b. Manual actions taken at the MCB are not successful in shutting down the reactor.
Basis: This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and subsequent operator manual actions taken at the MCB to shutdown the reactor are also unsuccessful.
This condition represents an actual or potential substantial degradation of the level of safety of the plant. An emergency declaration is required even ifthe reactor is subsequently shutdown by an action taken away from the MCB since this event entails a significant failure of the RPS. A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies.
If this action(s) is unsuccessful, operators would immediately pursue additional manual actions at locations away from the MCB. Actions taken at back-panels or other locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If the failure to shutdown the reactor is prolonged enough to cause a challenge to the core cooling or RCS heat removal safety functions, the emergency classification level will escalate to a Site Area Emergency via IC MS5. Depending upon plant responses and symptoms, escalation is also possible via IC FSl. Absent the plant conditions needed to meet either IC MS5 or FSl, an Alert declaration is appropriate for this event. It is recognized that plant responses or symptoms may also require an Alert declaration in accordance with the Recognition Category FI Cs; however, this IC and EAL are included to ensure a timely emergency declaration.
A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria.
99 MA9 ECL: Alert Initiating Condition:
Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: (1) Basis: a. The occurrence of ANY of the following hazardous events: Seismic event (earthquake)
Internal or external flooding event High winds or tornado strike FIRE EXPLOSION Other events with similar hazard characteristics as determined by the Shift Manager AND b. EITHER of the following:
I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. OR 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current operating mode. SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. Systems classified as related.
FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed.
EXPLOSION:
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization.
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, etc.) should not automatically be considered an explosion.
Such events may require a post-event inspection to determine if the attributes of an explosion are present.
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements,
- testing, or analysis.
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure.
This IC addresses a hazardous event that causes damage to a SAFETY SYSTEM, or a structure containing SAFETY SYSTEM components, needed for the current operating mode. This condition significantly reduces the margin to a loss or potential loss of a fission product barrier, and therefore represents an actual or potential substantial degradation of the level of safety of the plant. 100 EAL l .b.1 addresses damage to a SAFETY SYSTEM train that is in service/operation since indications for it will be readily available.
The indications of degraded performance should be significant enough to cause concern regarding the operability or reliability of the SAFETY SYSTEM train. EAL l.b.2 addresses damage to a SAFETY SYSTEM component that is not in service/operation or readily apparent through indications alone, or to a structure containing SAFETY SYSTEM components.
Operators will make this determination based on the totality of available event and damage report information.
This is intended to be a brief assessment not requiring lengthy analysis or quantification of the damage. Escalation of the emergency classification level would be via IC FSl or RSI. 101 ECL: Notification of Unusual Event Initiating Condition:
Loss of all offsite AC power capability to emergency buses for 15 minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: MU1 Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) Loss of ALL offsite AC power capability to BOTH AC emergency buses E5 AND E6 for 15 minutes or longer. Basis: This IC addresses a prolonged loss of offsite power. The loss of offsite power sources renders the plant more vulnerable to a complete loss of power to AC emergency buses. This condition represents a potential reduction in the level of safety of the plant. For emergency classification
- purposes, "capability" means that an offsite AC power source(s) is available to the emergency buses, whether or not the buses are powered from it. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of offsite power. Escalation of the emergency classification level would be via IC MAI. 102 MU2 ECL: Notification of Unusual Event Initiating Condition:
UNPLANNED loss of Control Room indications for 15 minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) An UNPLANNED event results in the inability to monitor one or more of the following parameters from within the Control Room for 15 minutes or longer. Reactor Power RCS Level RCS Pressure Core Exit Temperature Level in at least two steam generators Steam Generator Emergency Feed Water Flow Basis: UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
This IC addresses the difficulty associated with monitoring normal plant conditions without the ability to obtain SAFETY SYSTEM parameters from within the Control Room. This condition is a precursor to a more significant event and represents a potential degradation in the level of safety of the plant. As used in this EAL, an "inability to monitor" means that values for one or more of the listed parameters cannot be determined from within the Control Room. This situation would require a loss of all of the Control Room sources for the given parameter(s).
For example, the reactor power level cannot be determined from any analog, digital and recorder source within the Control Room. An event involving a loss of plant indications, annunciators and/or display systems is evaluated in accordance with 10 CFR 50.72 (and associated guidance in NUREG-1022) to determine if an NRC event report is required.
The event would be reported if it significantly impaired the capability to perform emergency assessments.
In particular, emergency assessments necessary to implement abnormal operating procedures, emergency operating procedures, and emergency plan implementing procedures addressing emergency classification, accident assessment, or protective action decision-making.
This EAL is focused on a selected subset of plant parameters associated with the key safety functions ofreactivity
- control, core cooling and RCS heat removal.
The loss of the ability to determine one or more of these parameters from within the Control Room is considered to be more significant than simply a reportable condition.
In addition, if all indication sources for one or more of the listed parameters are lost, then the ability to determine the values of other 103 SAFETY SYSTEM parameters may be impacted as well. For example, ifthe value for reactor vessel level cannot be determined from the indications and recorders on a main control board, the SPDS or the plant computer, the availability of other parameter valu.es may be compromised as well. Fifteen minutes was selected as a threshold to exclude transient or momentary losses of indication.
Escalation of the emergency classification level would be via IC MA2. 104 J MU3 ECL: Notification of Unusual Event Initiating Condition:
Reactor coolant activity greater than Technical Specification allowable limits. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: (1 or 2) (1) RM-6520-lreading greater than 2,670 mR/hr. OR (2) Sample analysis indicates that a reactor coolant activity value is greater than the Limiting Condition for Operation (LCO) specified in Technical Specification 3.4.8 Reactor Coolant System Specific Activity.
Basis: This IC addresses a reactor coolant activity value that exceeds an allowable limit specified in Technical Specifications.
This condition is a precursor to a more significant event and represents a potential degradation of the level of safety of the plant. Escalation of the emergency classification level would be via ICs FAl or the Recognition Category RI Cs. 105 MU4 ECL: Notification of Unusual Event Initiating Condition:
RCS leakage for 15 minutes or longer. Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: (1 or 2 or 3) Note: The STED/SED should declare the Unusual Event promptly upon determining that 15 minutes has been exceeded, or will likely be exceeded.
(1) RCS unidentified or PRESSURE BOUNDARY LEAKAGE greater than 10 gpm for 15 minutes or longer. OR (2) RCS IDENTIFIED LEAKAGE greater than 25 gpm for 15 minutes or longer. OR (3) Leakage from the RCS to a location outside containment greater than 25 gpm for 15 minutes or longer. Basis: IDENTIFIED LEAKAGE a. Leakage (except CONTROLLED LEAKAGE) into closed systems, such as pump seal or valve packing leaks that are captured and conducted to a sump or collecting tank, or b. Leakage into the containment atmosphere from sources that are both specifically located and known either not to interfere with the operation of Leakage Detection Systems or not to be PRESSURE BOUNDARY
- LEAKAGE, or c. Reactor Coolant System leakage through a steam generator to the Secondary Coolant System (primary to secondary leakage).
PRESSURE BOUNDARY LEAKAGE a. PRESSURE BOUNDARY LEAKAGE shall be leakage (except primary to secondary leakage) through a nonisolable fault in a Reactor Coolant System component body, pipe wall, or vessel wall. This IC addresses RCS leakage which may be a precursor to a more significant event. In this case, RCS leakage has been detected and operators, following applicable procedures, have been unable to promptly isolate the leak. This condition is considered to be a potential degradation of the level of safety of the plant. EAL #1 and EAL #2 are focused on a loss of mass from the RCS due to "unidentified leakage",
"pressure boundary leakage" or "identified leakage" (as these leakage types are defined in the plant Technical Specifications).
EAL #3 addresses a RCS mass loss caused by an UNISOLABLE leak through an interfacing system. These EALs thus apply to leakage into the containment, a secondary-side system or a location outside of containment.
The leak rate values for each EAL were selected because they are usually observable with normal Control Room indications.
Lesser values typically require time-consuming calculations 106 to determine).
EAL #1 uses a lower value that reflects the greater significance of unidentified or pressure boundary leakage.
The release of mass from the RCS due to the as-designed/expected operation of a relief valve does not warrant an emergency classification.
For PWRs, an emergency classification would be required if a mass loss is caused by a relief valve that is not functioning as designed/expected.
The 15-minute threshold duration allows sufficient time for prompt operator actions to isolate the leakage, if possible.
Escalation of the emergency classification level would be via ICs of Recognition Category R or F. 107 MUS ECL: Notification of Unusual Event Initiating Condition:
Automatic or manual trip fails to shutdown the reactor.
Operating Mode Applicability:
1 Note: A manual action is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core, and does not include manually driving in control rods or implementation of boron injection strategies.
Emergency Action Levels: (1 or 2) (1) a. AND b. OR (2) a. AND b. Basis: An automatic trip did not shutdown the reactor.
A subsequent manual action taken at the MCB is successful in shutting down the reactor.
A manual trip did not shutdown the reactor.
EITHER of the following:
- 1. A subsequent manual action taken at the MCB is successful in shutting down the reactor.
OR 2. A subsequent automatic trip is successful in shutting down the reactor.
This IC addresses a failure of the RPS to initiate or complete an automatic or manual reactor trip that results in a reactor shutdown, and either a subsequent operator manual action taken at the MCB or an automatic trip is successful in shutting down the reactor.
This event is a precursor to a more significant condition and thus represents a potential degradation of the level of safety of the plant. Following the failure on an automatic reactor trip, operators will promptly initiate manual actions at the MCB to shutdown the reactor.
If these manual actions are successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems.
If an initial manual reactor trip is unsuccessful, operators will promptly take manual action at another location(s) on the MCB to shutdown the reactor.
Depending upon several factors, the initial or subsequent effort to manually trip the reactor, or a concurrent plant condition, may lead to the generation of an automatic reactor trip signal. If a subsequent manual or automatic trip is successful in shutting down the reactor, core heat generation will quickly fall to a level within the capabilities of the plant's decay heat removal systems.
A manual action at the MCB is any operator action, or set of actions, which causes the control rods to be rapidly inserted into the core. This action does not include manually driving in control rods or implementation of boron injection strategies.
Actions taken at back-panels or other 108 locations within the Control Room, or any location outside the Control Room, are not considered to be "at the MCB". The plant response to the failure of an automatic or manual reactor trip will vary based upon several factors including the reactor power level prior to the event, availability of the condenser, performance of mitigation equipment and actions, other concurrent plant conditions, etc. If subsequent operator manual actions taken at the MCB are also unsuccessful in shutting down the reactor, then the emergency classification level will escalate to an Alert via IC MA5. Depending upon the plant response, escalation is also possible via IC FAl. Absent the plant conditions needed to meet either IC MA5 or FAl, an Unusual Event declaration is appropriate for this event. A reactor shutdown is determined in accordance with applicable Emergency Operating Procedure criteria.
Should a reactor trip signal be generated as a result of plant work, the following classification guidance should be applied.
- If the signal causes a plant transient that should have included an automatic reactor trip and the RPS fails to automatically shutdown the reactor, then this IC and the EALs are applicable, and should be evaluated.
- If the signal does not cause a plant transient and the trip failure is determined through other means, then this IC and the EALs are not applicable and no classification is warranted.
109 ECL: Notification of Unusual Event Initiating Condition:
Loss of all onsite or offsite communications capabilities.
Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: (1 or 2 or 3) (1) Loss of ALL of the following onsite communication methods:
In-Plant (PBX) Telephones Gai-Tronics Plant Radio System OR (2) Loss of ALL of the following ORO communications methods: Nuclear Alert System (NAS) Backup NAS Control Room/TSC telephones OR (3) Loss of ALL of the following NRC communications methods:
Basis: Emergency Notification System (ENS) Control Room/TSC telephones FTS telephones in the TSC MU6 This IC addresses a significant loss of on-site or offsite communications capabilities.
While not a direct challenge to plant or personnel safety, this event warrants prompt notifications to OROs and the NRC. This IC should be assessed only when extraordinary means are being utilized to make communications possible.
EAL #1 addresses a total loss of the communications methods used in support of routine plant operations.
EAL #2 addresses a total loss of the communications methods used to notify all OROs of an emergency declaration.
The OROs referred to here are the Commonwealth of Massachusetts and State of New Hampshire.
EAL #3 addresses a total loss of the communications methods used to notify the NRC of an emergency declaration.
110 MU7 ECL: Notification of Unusual Event Initiating Condition:
Failure to isolate containment or loss of containment pressure control.
Operating Mode Applicability:
1, 2, 3, 4 Emergency Action Levels: (1 or 2) (1) a. AND b. OR (2) a. AND b. Basis: Failure of containment to isolate when required by an actuation signal. ALL required penetrations are not closed within 15 minutes of the actuation signal. Containment pressure greater than 18 psig. Less than one full train of Containment Building Spray (CBS) is operating per design for 15 minutes or longer. This IC addresses a failure of one or more containment penetrations to automatically isolate (close) when required by an actuation signal. It also addresses an event that results in high containment pressure with a concurrent failure of containment pressure control systems.
Absent challenges to another fission product barrier, either condition represents potential degradation of the level of safety of the plant. For EAL #1, the containment isolation signal must be generated as the result on an normal/accident condition; a failure resulting from testing or maintenance does not warrant classification.
The determination of containment and penetration status -isolated or not isolated
-should be made in accordance with the appropriate criteria contained in the plant AOPs and EOPs. The 15-minute criterion is included to allow operators time to manually isolate the required penetrations, if possible.
EAL #2 addresses a condition where containment pressure is greater than the setpoint at which containment energy (heat) removal systems are designed to automatically
- actuate, and less than one full train of equipment is capable of operating per design. The 15-minute criterion is included to allow operators time to manually start equipment that may not have automatically
- started, if possible.
The inability to start the required equipment indicates that containment heat removal/depressurization systems are either lost or performing in a degraded manner. This event would escalate to a Site Area Emergency in accordance with IC PS 1 ifthere were a concurrent loss or potential loss of either the Fuel Clad or RCS fission product barriers.
111 APPENDIX A -ACRONYMS AND ABBREVIATIONS AC ......................................................................................................................
Alternating Current AOP .................................................................................................
Abnormal Operating Procedure ATWS ...................................................................................
Anticipated Transient Without Scram CDE ......................................................................................................
Committed Dose Equivalent CFR ......................................................................................................
Code of Federal Regulations CTMT/CNMT
...............................................................................................................
Containrnent CSP .............................................................................................................
Critical Safety Function CSFST ......................................................................................
Critical Safety Function Status Tree DBA ..............................................................................................................
Design Basis Accident DC ..............................................................................................................................
Direct Current EAL ...........................................................................................................
Emergency Action Level ECCS ............................................................................................
Emergency Core Cooling System ECL ................................................................................................
Emergency Classification Level EOF ..................................................................................................
Emergency Operations Facility EOP ...............................................................................................
Emergency Operating Procedure EPA .............................................................................................
Environmental Protection Agency FEMA .............................................................................
Federal Emergency Management Agency FSAR ...................................................................................................
Final Safety Analysis Report GE ......................................................................................................................
General Emergency IC ........................................................................................................................
Initiating Condition ID .............................................................................................................................
Inside Diameter ISFSI ...............................
Independent Spent Fuel Storage Installation (Dry Fuel Storage Facility)
Keff ....................................................................................
Effective Neutron Multiplication Factor LCO ...............................................................................................
Limiting Condition of Operation LOCA ........................................................................................................
Loss of Coolant Accident MCB ..................................................................................................................
Main Control Board MSIV .....................................................................................................
Main Steam Isolation Valve MSL .......................................................................................................................
Main Steam Line mR, mRem, mrem, mREM ............................................................
milli-Roentgen Equivalent Man MW ....................................................................................................................................
Megawatt NEI .............................................................................................................
Nuclear Energy Institute NPP ..................................................................................................................
Nuclear Power Plant NRC ..............................................................................................
Nuclear Regulatory Commission NSSS .................................................................................................
Nuclear Steam Supply System NORAD .................................................................
North American Aerospace Defense Command OBE .......................................................................................................
Operating Basis Earthquake OCA .............................................................................................................
Owner Controlled Area ODCM ...........................................................................................
Offsite Dose Calculation Manual ORO ................................................................................................
Off-site Response Organization PA ..............................................................................................................................
Protected Area PAG .......................................................................................................
Protective Action Guideline PRA ...................................................................................................
Probabilistic Risk Assessment PWR ........................................................................................................
Pressurized Water Reactor PSIG .................................................................................................
Pounds per Square Inch Gauge R .........................................................................................................................................
Roentgen RCS .............................................................................................................
Reactor Coolant System Rem, rem, REM ......................................................................................
Roentgen Equivalent Man RPS .........................................................................................................
Reactor Protection System A-1 RPV .............................................................................................................
Reactor Pressure Vessel RVLIS ......................................................................
Reactor Vessel Level Instrumentation System SAR ..............................................................................................................
Safety Analysis Report SAS ...........................................................................................................
Secondary Alarm Station SBO .........................................................................................................................
Station Blackout SCBA .....................................................................................
Self-Contained Breathing Apparatus SG ...........................................................................................................................
Steam Generator SI ..............................................................................................................................
Safety Injection SPDS ............................................................................................
Safety Parameter Display System SRO ............................................................................................................
Senior Reactor Operator TEDE .............................................................................................
Total Effective Dose Equivalent TOAF ..................................................................................................................
Top of Active Fuel TSC ..........................................................................................................
Technical Support Center WOG ..................................................................................................
Westinghouse Owners Group A-2 APPENDIX B -DEFINITIONS The following definitions are taken from Title 10, Code of Federal Regulations, and related regulatory guidance documents.
Alert: Events are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant or a security event that involves probable life threatening risk to site personnel or damage to site equipment because of HOSTILE ACTION. Any releases are expected to be limited to small fractions of the EPA PAG exposure levels. General Emergency:
Events are in progress or have occurred which involve actual or IMMINENT substantial core degradation or melting with potential for loss of containment integrity or HOSTILE ACTION that results in an actual loss of physical control of the facility.
Releases can be reasonably expected to exceed EPA PAG exposure levels offsite for more than the immediate site area. Notification of Unusual Event (NOUE): Events are in progress or have occurred which indicate a potential degradation of the level of safety of the plant or indicate a security threat to facility protection has been initiated.
No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. Site Area Emergency:
Events are in progress or have occurred which involve actual or likely major failures of plant functions needed for protection of the public or HOSTILE ACTION that results in intentional damage or malicious acts; 1) toward site personnel or equipment that could lead to the likely failure of or; 2) that prevent effective access to, equipment needed for the protection of the public. Any releases are not expected to result in exposure levels which exceed EPA PAG exposure levels beyond the site boundary.
The following are key terms necessary for overall understanding the NEI 99-01 emergency classification scheme. Emergency Action Level (EAL): A pre-determined, observable threshold for an Initiating Condition that, when met or exceeded, places the plant in a given emergency classification level. Emergency Classification Level (ECL): One of a set of names or titles established by the US Nuclear Regulatory Commission (NRC) for grouping off-normal events or conditions according to (1) potential or actual effects or consequences, and (2) resulting onsite and offsite response actions.
The emergency classification levels, in ascending order of severity, are:
- Notification of Unusual Event (NOUE)
- Alert
- Site Area Emergency (SAE)
- General Emergency (GE) Fission Product Barrier Threshold:
A pre-determined, observable threshold indicating the loss or potential loss of a fission product barrier.
Initiating Condition (IC): An event or condition that aligns with the definition of one of the four emergency classification levels by virtue of the potential or actual effects or consequences.
A-3 Selected terms used in Initiating Condition and Emergency Action Level statements are set in all capital letters (e.g., ALL CAPS). These words are defined terms that have specific meanings as used in this document.
The definitions of these terms are provided below. CONFINEMENT BOUNDARY:
-The barrier(s) between spent fuel and the environment once the spent fuel is processed for dry storage.
CONTAINMENT INTEGRITY:-
The procedurally defined conditions or actions taken to secure containment and its associated structures,
- systems, and components as a functional barrier to fission product release under shutdown conditions.
EXPLOSION:
A rapid, violent and catastrophic failure of a piece of equipment due to combustion, chemical reaction or overpressurization.
A release of steam (from high energy lines or components) or an electrical component failure (caused by short circuits, grounding, arcing, . etc.) should not automatically be considered an explosion.
Such events may require a post-event inspection to determine if the attributes of an explosion are present.
FAUL TED: The term applied to a steam generator that has a steam leak on the secondary side of sufficient size to cause an uncontrolled drop in steam generator pressure or the steam generator to become completely depressurized.
FIRE: Combustion characterized by heat and light. Sources of smoke such as slipping drive belts or overheated electrical equipment do not constitute FIRES. Observation of flame is preferred but is NOT required if large quantities of smoke and heat are observed.
HOSTAGE:
A person(s) held as leverage against the station to ensure that demands will be met by the station.
HOSTILE ACTION: An act toward a NPP or its personnel that includes the use of violent force to destroy equipment, take HOSTAGES, and/or intimidate the licensee to achieve an end. This includes attack by air, land, or water using guns, explosives, PROJECTILEs,
- vehicles, or other devices used to deliver destructive force. Other acts that satisfy the overall intent may be included.
HOSTILE ACTION should not be construed to include acts of civil disobedience or felonious acts that are not part of a concerted attack on the NPP. Non-terrorism-based EALs should be used to address such activities (i.e., this may include violent acts between individuals in the owner controlled area). HOSTILE FORCE: One or more individuals who are engaged in a determined
- assault, overtly or by stealth and deception, equipped with suitable weapons capable of killing,
- maiming, or causing destruction.
IMMINENT:
The trajectory of events or conditions is such that an EAL will be met within a relatively short period of time regardless of mitigation or corrective actions.
IMPEDE: Entry into an area requires extraordinary measures to facilitate entry of personnel into the affected room/area by installing temporary shielding, requiring use of non-routine protective equipment, or requesting an extension in dose limits beyond normal administrative limits. INDEPENDENT SPENT FUEL STORAGE INSTALLATION (ISFSI):
A complex that is designed and constructed for the interim storage of spent nuclear fuel and other radioactive materials associated with spent fuel storage. (Dry Fuel Storage Facility)
A-4 INTACT: Capable of being pressurized.
OWNER CONTROLLED AREA: The site property owned by, or otherwise under the control of, the licensee.
PROJECTILE:
An object directed toward a NPP that could cause concern for its continued operability, reliability, or personnel safety. PROTECTED AREA: The area under continuous access monitoring and control, and armed protection as described in the site Security Plan. REFUELING PATHWAY:
The reactor refueling cavity, spent fuel pool and fuel transfer canal. RUPTURE(D):
The condition of a steam generator in which primary-to-secondary leakage is of sufficient magnitude to require a safety injection.
SAFETY SYSTEM: A system required for safe plant operation, cooling down the plant and/or placing it in the cold shutdown condition, including the ECCS. These are typically systems classified as safety-related.
SECURITY CONDITION:
Any Security Event as listed in the approved security contingency plan that constitutes a threat/compromise to site security, threat/risk to site personnel, or a potential degradation to the level of safety of the plant. A SECURITY CONDITION does not involve a HOSTILE ACTION. UNISOLABLE:
An open or breached system line that cannot be isolated, remotely or locally.
UNPLANNED:
A parameter change or an event that is not 1) the result of an intended evolution or 2) an expected plant response to a transient.
The cause of the parameter change or event may be known or unknown.
VISIBLE DAMAGE: Damage to a component or structure that is readily observable without measurements,
- testing, or analysis.
The visual impact of the damage is sufficient to cause concern regarding the operability or reliability of the affected component or structure.
A-5 Enclosure 4 to SBK-L-16196 Enclosure 4 NEI 99-01, Rev. 6, Deviations and Differences, Seabrook Station Nuclear Power Plant -Unit 1 NEI 99-01 Rev 6 Deviations and Differences Seabrook Station Nuclear Power Plant -Unit 1 GENERIC DIFFERENCES NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant References BWRs Deleted BWR references as annrooriate Uses A for radiological effluent/radiation level I Cs Uses R for radiological effluent/radiation level I Cs Uses E-HU for ISFSI ICs Uses EU for ISFSI ICs Uses S for Svstem Malfunction I Cs Uses M for System Malfunction I Cs Emergency Classification I Cs are presented in ascending order (NOUE-GE) Emergency Classification I Cs are presented in descending order (GE -NOUE) GENERAL NOTES All NOTEs made site soecific by identifying the STED/SED as the user. Site specific information is highlighted in yellow. No deviations were indicated to complete the upgrade to Revision
- 6.
ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RGl: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous radioactivity resulting in offsite dose greater than Release of gaseous radioactivity resulting in offsite dose greater than 1,000 mrem 1,000 mrem TEDE or 5,000 mrem thyroid CDE. TEDE or 5,000 mrem thyroid CDE. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 2 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (1) Reading on ANY of the following radiation monitors greater (I) Reading on ANY of the following radiation monitors greater than the than the reading shown for 15 minutes or longer: reading shown for 15 minutes or longer: (site-specific monitor list and threshold values) Monitor :Reading (2) Dose assessment using actual meteorology indicates doses RM-6528-4 (WRGM rate) 2.85E+8 uCi/sec greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond (site-specific dose receptor point). Ffliiie After Shutdown Reading (3) Field survey results indicate EITHER of the following at or :SI hr > I hr to ::; 2 hrs beyond (site-specific dose receptor point):
- (MSL A)
- Closed window dose rates greater than 1,000 mR/hr 1310mR/hr 1060 mR/hr expected to continue for 60 minutes or longer. RM-6482-1 * (MSL B) 1310mR/hr 1060 mR/hr
- Analyses of field survey samples indicate thyroid COE RM-6482-2*
(MSL C) greater than 5,000 mrem for one hour of inhalation. 1310 mR/hr 1060 mR/hr (MSL D) 1310mR/hr 1060 mR/hr
- With release path to the environment from affected steam line, e.g., o en ASDV or SR V, line is faulted, ORen steam sl!QIJ!y to I FW P 37 A. (2) Dose assessment using actual meteorology indicates doses greater than 1,000 mrem TEDE or 5,000 mrem thyroid COE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundarv: I Closed window dose rates greater than 1,000 mR/hr expected to continue for 60 minutes or longer. I Analyses of field survey samples indicate thyroid COE greater than 5,000 mrem for one hour of inhalation. Difference /Justification RGI.I: Site specific information, see Y3 EPCALC-06-02 -Effluent Monitor Values for R EALs RGl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 3 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RG2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level cannot be restored to at least (site-specific Level 3 Spent fuel pool level cannot be restored to at least I .5 ft. (Level3) for 60 description) for 60 minutes or longer. minutes or longer. Difference /Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Spent fuel pool level cannot be restored to at least (site-specific (1) Spent fuel pool level cannot be restored to at least I .5 ft. above the fuel Level 3 value) for 60 minutes or longer. racks for 60 minutes or longer as indicated by SF-LI-2616 (MPCS com uter oint A4172 or SF-Ll-2617 (MPCS computer oint A4220 Difference /Justification RG2.1: Site specific information, see V2 SFP Levels Drawing 4 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous radioactiv ity resulting in offsite dose greater than I 00 mrem TEDE or 500 mrem thyroid COE. Difference
/Justification None NEl 99-01Rev6 Seabrook Station Nuclear Power Plant Release of gaseous radioactivity resulting in offsite dose greater than 100 mrem TEDE or 500 mrem thyroid CDE. THRESHOLDS Seabrook Station Nuclear Power Plant 5 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (1) (2) (3) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: (site-specific monitor list and threshold values) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid COE at or beyond (site-specific dose receptor point). Field survey results indicate EITHER of the following at or beyond (site-specific dose receptor point):
- Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer.
- Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation.
Difference
/Justification (1) Reading on ANY of the following radiation monitors greater than the reading shown for 15 minutes or longer: Reading ::::: 1 hr > 1 hr to ::::: 2 hrs MSLA 130 mR/hr 100 mR/hr MSLB 130 mR/hr 100 mR/hr MSLC 130 mR/hr 100 mR/hr MSLD 130 mR/hr 100 mR/hr
- With release path to the environment from affected steam line, e.g., open ASDV or SRV, line is faulted, o en steam su2 ly to l-FW-P-37A, etc. (2) Dose assessment using actual meteorology indicates doses greater than 100 mrem TEDE or 500 mrem thyroid CDE at or beyond the site boundary. (3) Field survey results indicate EITHER of the following at or beyond the site boundary:
Closed window dose rates greater than 100 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 500 mrem for one hour of inhalation
. RSl.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for R EALs RSl.2 & 3: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 6 ABNORMAL RAD LEVELS I RADIOLOGICAL EFFLUENT ICS/EALS RS2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Spent fuel pool level at (site-specific Level 3 description).
Spent fuel pool level at 1.5 ft. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Lowering of spent fuel pool level to (site-specific Level 3 value). (I) Lowering of spent fuel pool level to 1.5 ft above the fuel racks as indicated by SF-LI-2616 (MPCS computer point A4172) or SF-Ll-2617 MPCS com uter oint A4220). Difference
/Justification RS2.1: Site specific information, see V2 SFP Levels Drawing 7 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Release of gaseous or liquid radioactivity resulting in offsite dose greater than I 0 mrem TEDE or 50 mrem thyroid CDE. Difference
/Justification None N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous or liquid radioactiv ity resulting in offsite dose greater than I 0 mrem TEDE or 50 mrem thyroid CDE. THRESHOLDS Seabrook Station Nuclear Power Plant 8 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (I) Reading on ANY of the following radiation monitors greater (1) Reading on ANY of the following radiation monitors greater than the reading shown than the reading shown for 15 minutes or longer: for 15 minutes or longer: (site-specific monitor list and threshold values) (2) Dose assessment using actual meteorology indicates doses Monitor !Readin!!s greater than I 0 mrem TEDE or 50 mrem thyroid COE at or RM-6528-4 (WRGM rate) 2.85E+6 uCi/sec beyond (site-specific dose receptor point). (3) Analysis of a liquid effluent sample indicates a concentration RM-6481-1 * (MSL A) 10 mR/hr or release rate that would result in doses greater than 10 mrem RM-6482-1 * (MSL B) 10 mR/hr TEDE or 50 mrem thyroid COE at or beyond (site-specific dose receptor point) for one hour of exposure. RM-6482-2* (MSL C) 10 mR/hr (4) Field survey results indicate EITHER of the following at or RM-6481-2* (MSL D) 10 mR/hr beyond (site-specific dose receptor point):
- With release path to the environment from affected steam line, e.g. o en ASDY or
- Closed window dose rates greater than 10 mR/hr expected SRV, line is faulted, <llien steam supply to I-FW-P-37A, etc. to continue for 60 minutes or longer.
- Analyses of field survey samples indicate thyroid CDE (2) Dose assessment using actual meteorology indicates doses greater than 10 mrem greater than 50 mrem for one hour of inhalation. TEDE or 50 mrem thyroid CDE at or beyond the site boundary. (3) Analysis ofa liquid effluent sample indicates a concentration or release rate that would result in doses greater than 10 mrem TEDE or 50 mrem thyroid CDE at or beyond the site boundary for one hour of exposure. (4) Field survey results indicate EITHER of the following at or bevond the site boundarv: Closed window dose rates greater than 10 mR/hr expected to continue for 60 minutes or longer. Analyses of field survey samples indicate thyroid COE greater than 50 mrem for one hour of inhalation. Difference
/Justification RAJ.1: Site specific information, see V3 EPCALC-06-02 -Effluent Monitor Values for REA Ls RA1.2, 3, 4: Site specific information, see V4 ODCM and TS Basis for Site Boundary Receptor Point 9 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA2: INITIATING CONDITIONS NEr 99-01 Rev 6 Seabrook Station Nuclear Power Plant Significant lowering of water level above, or damage to, irradiated fuel. Significant lowering of water level above, or damage to, irradiated fuel. Difference
/Justification None THRESHOLDS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Uncovery of irradiated fuel in the REFUELING PATHWAY. (1) Un co very of irradiated fuel in the REFUELING PATHWAY. (2) Damage to irradiated fuel resulting in a release of radioactivity from (2) Damage to irradiated fuel resulting in a release ofradioactivity from the fuel as indicated by ANY of the following radiation monitors:
the fuel as indicated by high-alarm, or reading in excess of the (site-specific listing ofradiation
- monitors, and the associated current high-alarm setpoint on ANY of the following radiation readings, setpoints and/or alarms) monitors:
(3) Lowering of spent fuel pool level to (site-specific Level 2 value). I RM-6518-1
, FSB High Range I [See Developer Notes] I RM-6562-1
, FSB Vent I I RM-6535A-1
, Manip Crane I I RM-65358-1, Manip Crane I (3) Lowering of spent fuel pool level to 12 ft. 3 inches above the fuel racks on SF-Ll-2616 (MPCS computer point A4172 or SF-Ll-2617 MPCS comp_uter oint A4220 . Difference
/Justification RA2.l: Site specific information
, see V6 Refueling pathway RU2 RA2 RA2.2: Site specific information
, see VS UFSAR Table 12.3-14 -CTMT Post-LOCA Range RA2.3: Site specific information, see V2 SFP Levels Drawing 10 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS RA3: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Radiation levels that impede access to equipment necessary for normal plant Radiation levels that impede access to equipment necessary for normal plant operations
, cooldown or shutdown. operations
, shutdown or cooldown. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 11 ABNORMAL RAD LEVELS/ RADIOLOGICAL EFFLUENT ICS/EALS (I) Dose rate greater than 15 mR/hr in ANY of the following areas: (1) Dose rate greater than 15 mR/hr in ANY of the following areas:
- Control Room I Control Room I
- Central Alarm Station I Central Alarm Station (CAS) by survey I * (other site-specific areas/rooms) I Secondary Alarm Station (SAS) by survey I (2) An UNPLANNED event results in radiation levels that prohibit or impede access to any of the following plant rooms or areas: (2) An UNPLANNED event results in radiation levels that prohibit or (site-specific list of plant rooms or areas with entry-related mode IMPEDE access to any of the following plant rooms or areas: applicability identified) [_able HI Area Mode rrimary Aux Building 25 ft elevation 1, 2, 3, 4 7 ft elevation
-26 ft elevation ffurbine Building 21 ft elevatio 1, 2, 3 50 ft elevation Essential Switchgear Rooms Essential 1, 2, 3, 4 !>Jen essentiE!] Steam anEi FeeEiwater
- l. I,'.!.]. ' "Waste Process Building 25 ft elevation 1, 2, 3 -3 ft elevation ;i l ft Containmen t G,4 RHR/CBS Equipment Vaults 3,4 Difference
/Justification Table Hl: Site specific information, see V7 -Table Hl Procedure References 12 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS RUl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Release of gaseous or liquid radioactivity greater than 2 times the (site-specific Release of gaseous or liquid radioactivity greater than 2 times the effluent release controlling document) limits for 60 minutes or longer. ODCM limits for 60 minutes or longer. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant 13 COLD SHUTDOWN/ REFUELING SYSTEM MALFUNCTION ICS/EALS (1) Reading on ANY effluent radiation monitor greater than 2 times the (site-I) a. Valid R:reading on ANY non isolated of the following specific effluent release controlling document) limits for 60 minutes or effluent ratJt radiation monitors greater than 2 times the longer: ODCM limits value of the current high-alarm setpoint for 60 (site-specifi c monitor list and threshold values corresponding to 2 times the minutes or longer: controlling document limits) I RM-6509-1 (WTT Disch) I (2) Reading on ANY effluent radiation monitor greater than 2 times the alarm I RM-6521-1 (TB Sump) I setpoint established by a current radioactivity discharge permit for 60 minutes I RM-6519-1 SG I or longer. (3) Sample analysis for a gaseous or liquid release indicates a concentration or Blowdown) release rate greater than 2 times the (site-specific effluent release controlling 1 r-6473-1 (WT LI I document) limits for 60 minutes or longer. FF) I RM-6528-4 (WRGM rate) I AND b. The discharge flow to the environment is not isolated within 60 minutes Reading on AN¥ effhient rndiation monitoF gFeateF than 2 times the a)aFm setj3oint estae)ished ey R eHFFent Fadioaeti
... diseharge JJermit for 60 minutes OF longer. OR analysis for a gaseous or liquid release indicates a I concentration or release rate greater than 2 times the ODCM limits for 60 minutes or longer. 2) I Difference /Justification: EAL RU1(2) deleted because it is redundant to EAL RUl(l) RUl.1: Site specific information
, see VS 012_Table 03-15 -UFSAR WRGM Ranges and V32 UFSAR Table 11.5-1 14 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS RU2: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLA ED loss of water level above irradiated fuel. UNPLANNED loss of water level above irradiated fuel. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) a. UNPLANNED water level drop in the REFUELING (I) a. UNPLANNED water level drop in the REFUELTNG PATHWAY as PATHWAY as indicated by ANY of the following:
indicated by ANY of the following:
(site-specific level indications).
I 1-SF-Ll-2607 (Spent Fuel Pool Level) I AND I 1-SF-Ll-2629 or 1-SF-LIT-2629-1 (Reactor Refuel Cavity Level) I b. UNPLANNED rise in area radiation levels as indicated by AND ANY of the following radiation monitors.
- b. UNPLANNED rise in area radiation levels as indicated by ANY of (site-specific list of area radiation monitors) the following radiation monitors: I RM-6535-A-1
, Containment Manipulator Crane I I RM-6535-B-1, Containment Manipulator Crane I I BM-6549-1, FSB Spent Fuel Range Low I I RM-6518-1, FSB Spent Fuel Range Hi I Difference
/Justification CGJ.la: Site specific information
, see Y9-SFP level CGl.lb: Site specific information
, see YlO UFSAR Table 12.3-14-CTMT Post-LOCA Range 15 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CGl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory affecting fuel Loss of reactor vessel/RCS inventory affecting fuel clad integrity with clad integrity with containment challenged. containment challenged. Difference
/Justification None THRESHOLDS NEJ 99-01 Rev 6 Seabrook Station Nuclear Power Plant 16 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS (1) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than (1) a. VLIS Full Range< 55% -141.5 inl for 30 minutes or (site-specific level) for 30 minutes or longer. longer. AND AND b. ANY indication from the Containment Challenge Table (see b. ANY indication from the Containment Challenge Table C2. below). (2) a. Reactor vessel/RCS level cannot be monitored for 30 minutes or (2) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be longer. monitored for 30 minutes or longer. AND AND b. Core uncoverv is indicated by ANY of the following: b. Core uncovery is indicated by ANY of the following: I (Manipulator Crane) reading greater than 9500 mR/hr * (Site-specific radiation monitor) reading greater than (site-(Manipulator Crane) reading greater than 9500 mR/hr specific value) Erratic source range monitor indication
- Erratic source range monitor indication [PWR]
- UNPLANNED increase in (site-specific sump and/or tank) UNPLANNED increase in Containment Sum s A or B levels of levels of sufficient magnitude to indicate core uncovery sufficient magnitude to indicate core uncovery. * (Other site-specific indications) Visual observation . AND AND c. ANY indication from the Containment Challenge Table (see c. ANY indication from the Containment Challenge [fable C2J. below). Containment Challenge Table C2 Containment Challenge Table
- CONTAINMENT CLOSURE not established*
- CONTAINMENT CLOSURE not established*
- Containment H2 concentration 2: 6% * (Explosive mixture) exists inside containment
- UNPLANNED increase in containment pressure
- UNPLANNED increase in containment pressure *If CONTAINMENT CLOSURE is re-established prior to exceeding
- Secondary containment radiation monitor reading above (site-the 30-minute time limit, then declaration of a General Emergency is specific value) fBWRl not required.
- lfCONTAINME T CLOSURE is re-established prior to exceeding the 30-minute time limit, then declaration of a General Emergency is not required. Difference /Justification CGl.la: Site specific information, see Vll EPCALC-06-04 -RVLIS Values CG1.2b: Site specific information, see V 10 UFSAR Table 12.3-14 -Manipulator Crane Monitor Range and V 13 Containment Sumps CG1.2c: Site specific information, see V 14 H2 concentration in containment 17 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CSl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory affecting core Loss of reactor vessel/RCS inventory affecting core decay heat removal decay heat removal capability
. capability. Difference /Justification None THRESHOLDS N El 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) a. co TArNME T CLOSURE not established. (I) a. CONTAINMENT CLOSURE not established. AND AND b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than b. YLIS Full Range<63% -101.9 in. (site-specific level). (2) a. CONTAINMENT CLOSURE established. (2) a. co TArNMENT CLOSURE established. AND AND b. VLIS Full Range<55% -141.5 in. b. (Reactor vessel/RCS [PWR] or RPV [BWR]) level less than (3) a. Reactor vessel/RCS level cannot be monitored for 30 minutes or (site-specific level). longer. (3) a. (Reactor vessel/RCS [PWR] or RPV [BWR]) level cannot be AND monitored for 30 minutes or longer. b. Core uncovery is indicated by ANY of the following: AND [RM-6535A-l (Manipulator Crane) reading greater than 9500 mR/hr b. Core uncovery is indicated by ANY of the following: [RM-65358-1 (Manipulator Crane) reading greater than 9500 mR/hr * (Site-specific radiation monitor) reading greater than 'Erratic source range monitor indication (site-specific value)
- Erratic source range monitor indication [PWR] UNPLANNED increase in Containment Sum s A or B levels of
- UNPLA ED increase in (site-specific sump and/or sufficient magnitude to indicate core uncovery. tank) levels of sufficient magnitude to indicate core 'VTSual observation. uncovery * (Other site-specific indications) Difference /Justification 18 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CSl.lb & CSl.2b: Site specific information, see Vl 1 EPCALC-06-04 -RVL!S Values CSJ.3b: Site specific information
, see V 12 UFSAR Table 12.3-14 -CTMT Post-LOCA Range and V 13 Containment Sumps 19 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CAl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of(reactorvess el/RCS [PWR] or RPY [BWR]) inventory.
Loss of reactor vessel/RCS inventory Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory as (I Loss of reactor vessel/RCS inventory as indicated by YLIS full range indicated by level less than (site-specific level). < 64% -96.9 in . (2) a. (Reactor vessel/RCS
[PWR] or RPY [BWR]) level cannot be (2) a. Reactor vessel/RCS level cannot be monitored for 15 minutes or monitored for 15 minutes or longer longer. AND AND b. UNPLA ED increase in (site-specific sump and/or tank) b. UNPLANNED increase in Containment Sumps A or B levels due levels due to a loss of (reactor vessel/RCS [PWR] or RPV to a loss of reactor vessel/RCS inventory.
[BWR]) inventory.
Difference
/Justification CAJ.lb: Site specific information, see Vl I EPCALC-06 RYLIS Values CAJ.2b: Site specific information, see Vl3 Containment Sumps 20 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CA2: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of all offsite and all onsite AC power to emergency buses for 15 minutes Loss of all offsite and all onsite AC power to emergency buses for 15 or longer. minutes or longer. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (!) Loss of ALL offsite and ALL onsite AC Power to (site-specific OTE: For a bus to be considered energized from SEPS, both SEPS diesel emergency buses) for 15 minutes or longer. generator sets must be functional. (1) Loss of ALL offsite and ALL onsite AC Power to BOTH AC emergency buses 5 AND E6 for 15 minutes or longer. Difference
/Justification Added NOTE for consideration of an additional non-safety power supply Supplemental Emergency Power System (SEPS) 21 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CA3: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Inability to maintain the plant in cold shutdown. Inability to maintain the plant in cold shutdown. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) UNPLANNED increase in RCS temperature to greater than (site-(1) UNPLANNED increase in RCS temperature to greater than 200° F for specific Technical Specification cold shutdown temperature limit) greater than the duration specified in the following table. for greater than the duration specified in the following table. Table CJ -RCS Heat-up Duration Thresholds Table: RCS l-lcat-up Duration Thresholds CONTAINMENT Containment Closure Heat-up RCS Status Heat-up Durntion RCS Status Status Duration CLOSURE Status Intact (but not at reduced Not applicable 60 minutes* INT ACT and reactor inventory rPWRl) Not applicable 60 minutes* Not intact (or at reduced Established 20 minutes* vessel ;::: -36 inches inventory rPWRl) Not Established 0 minutes Not INT ACT or reactor Established 20 minutes*
- If an RCS heat removal system is in operation within this time frame and vessel < -36 inches Not Established 0 minutes RCS temoerature is being reduced, the EAL is not aoolicable.
- lfRHR is in operation within this time frame and RCS temperature is (2) UNPLANNED RCS pressure increase greater than (site-specific being reduced, the EAL is not applicable. pressure reading). (This EAL does not apply during water-solid plant conditions. [PWR]) (2) UNPLANNED RCS pressure increase greater than Q5 sig. (This EAL does not apply during water-solid plant conditions
.) Difference
/Justification CA3.J: Site specific information
, see V 15 Cold SD Temp Limit TS and V 16 -Reduced Inventory CA3.2: Site specific information
, see Vl 7 RCS Pressure range 22 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CA6: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Hazardous event affecting a SAFETY SYSTEM needed for the current Hazardous event affecting a SAFETY SYSTEM needed for the current operating mode. operating mode. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) a. The occurrence of ANY of the following hazardous events: (I) a. The occurrence of ANY of the following hazardous events:
- Seismic event (earthquake)
I Seismic event (earthquake)
I
- Internal or external flooding event I Internal or external flooding event I
- High winds or tornado strike J High winds or tornado strike I
- Fl RE I FIRE I
- EXPLOSION * (site-specific hazards) I EXPLOSION I
- Other events with similar hazard characteristics as I Other events with similar hazard characteristics as determined by I determined by the Shift Manager the Shift Manager AND AND b. EITHER of the following: b. EITHER of the following:
I. Event damage has caused indications of degraded I. Event damage has caused indications of degraded performance in at least one train of a SAFETY SYSTEM performance in at least one train of a SAFETY SYSTEM needed for the current operating mode. needed for the current operating mode. OR OR 2. The event has caused VISIBLE DAMAGE to a SAFETY 2. The event has caused VISIBLE DAMAGE to a SAFETY SYSTEM component or structure needed for the current SYSTEM component or structure needed for the current operating mode. operating mode. Difference
/Justification 23 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS None 24 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CUl: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED loss of(reactor vessel/RCS [PWR] or RPV [BWR]) inventory UNPLANNED loss ofreactor vessel/RCS inventory for 15 minutes or longer. for 15 minutes or longer. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) UNPLANNED loss of reactor coolant results in (reactor vessel/RCS (1) UNPLANNED loss ofreactor coolant results in reactor vessel/RCS level [PWR] or RPV [BWR]) level less than a required lower limit for 15 less than a required lower limit of an operating band, specified by an minutes or longer. operating procedure for 15 minutes or longer. (2) a. (Reactor vessel/RCS
[PWR] or RPV [BWR]) level cannot be monitored.
(2) a. Reactor vessel/RCS level cannot be monitored. AND AND b. UNPLANNED increase in (site-specific sump and/or tank) b. UNPLANNED increase in Containment Sump A or B level. levels. Difference
/Justification CUl.2b: Site specific information, see V13 Containment Sumps 25 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS I CU2: INITIATING CONDITIONS 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loh of all but one AC power source to emergency buses for 15 minutes or longer. Loss of all but one AC power source to emergency buses for 15 minutes or longer. Di(ference
/Justification Nope I THRESHOLDS 99-01 Rev 6 Seabrook Station Nuclear Power Plant (I) fr: AC power capability to (site-specific emergency buses) is reduced to a ote: For power restoration from the SEPS, both SEPS diesel generator sets single power source for 15 minutes or longer. must be functional. AND 1) a. AC power capability to QTH AC emergency buses SA D b. Any additional single power source failure will result in loss of all AC 6 is reduced to a single power source for 15 minutes or longer. power to SAFETY SYSTEMS. --AND b. Any additional single power source failure will result in loss of all AC power to SAFETY SYSTEMS.
-om frhere are six power sources to consider:
345 kV offsite power Line 369 . 345 kV offsite power Line 363 . 345 kV offsite power Line 394 . Emergency Diesel Generator A . Emergency Diesel Generator B . SEPS. For SEPS to be considered available both SEPS diesel generator sets must be functional.
-Difference
/Justification NOTE to clarify that both SEPS constitute a single power source. Added NOTE containing table of AC power sources per EPFAQ 2015-15. 26 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS 27 l COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CU3: INITIATING CONDITIONS N EI 99-01 Rev 6 Seabrook Station Nuclear Power Plant UNPLANNED increase in RCS temperature. UNPLANNED increase in RCS temperature
. Difference
/Justification None THRESHOLDS NET 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) UNPLANNED increase in RCS temperature to greater than (site-(I) UNPLANNED increase in RCS temperature to greater than !200° F. specific Technical Specification cold shutdown temperature limit). (!2) Loss of ALL RCS temperature and reactor vessel/RCS level* indication
(!2) Loss of ALL RCS temperatur e and (reactor vessel/RCS [PWR] or for 15 minutes or longer. RPV [BWR]) level indication for 15 minutes or longer. Difference
/Justification CU3.1: Site specific information
, see V15 Cold SD Temp Limit TS 28 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CU4: INITIATING CONDITIONS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of Vital DC power for 15 minutes or longer. Loss of Vital DC power for 15 minutes or longer. Difference
/Justification None THRESHOLDS NEI 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Indicated voltage is less than (site-specific bus voltage value) on (I) Indicated voltage is less than I 05V on required Vital DC buses required Vital DC buses for 15 minutes or longer. associated with the Protected Train for 15 minutes or longer. I TrainA-llAand llQ I I ifrain B -11 B and 11 D I Difference
/Justification CU4.1: Site specific information, see Vl8 UFSAR 8.3.2 -DCV 105 limit 29 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS CVS: INITIATING CONDITIONS NEl 99-01 Rev 6 Seabrook Station Nuclear Power Plant Loss of all onsite or offsite communications capabilities. Loss of all on site or offsite communications capabilities. Difference
/Justification None THRESHOLDS NET 99-01 Rev 6 Seabrook Station Nuclear Power Plant (1) Loss of ALL of the following onsite communication methods: (1) Loss of ALL of the following onsite communication methods: (site-specific list of communications methods)
I (PB)Q Telephones I (2) Loss of ALL of the following ORO communications methods:
I Gai-Tronics I (site-spec ific list of communications methods) I !"l_<l_nt Radio System I (3) Loss of ALL of the following NRC communications methods: (site-specific list of communications methods) (2) Loss of ALL of the following ORO communications methods: I Alert System Ll'JASJ I I Backup NAS I I Afl. Control Room/TSC telephones I I GelltilaF tele13hsAes I (3) Loss of ALL of the following NRC communications methods:
I Notification System (ENS) I I All plant telephones I I ,FTS telephones in the TSq I I Gellt1laF I Difference
/Justification Provided site specific communication s methods 30 COLD SHUTDOWN/
REFUELING SYSTEM MALFUNCTION ICS/EALS 31 Seabrook Station Nuclear Power Plant FG I -Loss of any two barriers and Loss or FSl -Loss or Potential Loss of any two barriers. FAI -Any Loss or any Potential Loss of either the Fuel Potential Loss of the third barrier. Clad or RCS barrier. Difference
/Justification None Fuel Clad Barrier RCS Barrier Containment Barrier Loss Potential Loss Loss Potential Loss Loss Potential Loss NEI 99-01 Rev 6 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage 1. RCS or SG Tube Leakage Not Applicable A. RCS/reactor A. An automatic or A. Operation of a standby A. A leaking or Not Applicable vessel level less manual ECCS (SI) charging (makeup) RUPTURED SG is than (site-specific actuation is required pump is required by FAUL TED outside of level). by EITHER of the EITHER of the containment. following: following:
- SG tube 2. SG tube leakage. RUPTURE. OR FISSION PRODUCT BARRIER ICS/EALS B. RCS cooldown rate greater than (site-specific pressurized thermal shock criteria/limits defined by site-specific indications). Seabrook Station Nuclear Power Plant ot Applicable A. Core Cooling A. An automatic or A. Operation of a second A. A leaking or Not Applicable (C) CSF-ORANGE manual SI actuation is charging pump in the RUPTURED SG is entry conditions required by EITHER of normal charging mode FAUL TED outside of I (NOTE 1 the following: is required by EITHER containment.
- UNTSOLABLE of the following:
RCS leakage 1. UNISOLABLE OR RCS leakage
- SG tube RUPTURE.
OR 2. SG tube leakage. OR B. CS Integrity (P) CSF -RED entry condition s I met with RCS press > psig. OTE 1) Difference
/Justification Fuel Clad Barrier Potential Loss 1.A: Site specific information, see Y20 CSFST Core Cooling RCS Barrier Potential Loss 1.B: Site specific information, see V21 CSFST Integrity 34 FISSION PRODUCT BARRIER ICS/EALS NEJ 99-01 Rev 6 2. Inadequate Heat Removal 2. Inadequate Heat Removal 2. Inadequate Heat Removal A. aore exit A. Core exit Not Applicable A. Inadequate RCS heat Not Applicable A. 1. (Site-specific ermocouple thermocouple removal capability via criteria for readings greater readings greater steam generators as entry into core than (site-specific than (site-specific indicated by (site-cooling temperature temperature specific indications). restoration r) value). procedure) OR AND B. Inadequate RCS 2. Restoration heat removal capability via procedure not effective within steam generators 15 minutes.
as indicated by (site-specific I indications). Seabrook Station Nuclear Power Plant A. Core Cooling (C) A. Core Cooling (C) Not Applicable A. eat Sink (H) CSF -Not Applicable A. Core Cooling (C) CSF -RED entry CSF-ORANGE ED entry conditions CSF -RED entry t"d;1;00, mot entry conditions met. OTEl conditions met for OTE I} net. OTE I) 15 minutes or OR longer. OTE 1 B. eat Sink (H) CSF -RED entry conditions met. I OTE 1) Difference
/Justificat ion Fuel Clad Barrier:
Loss 2.A, Potential Loss 2.A and Containment Barrier Potential Loss 2.A: Site specific information
, see Y20 CSFST Core Cooling RCS Barrier:
Potential Loss 2.A: Site specific information
, see Y22 CSFST Heat Sink 35 FISSION PRODUCT BARRIER ICS/EALS NET 99-01 Rev 6 3. RCS Activity I Containment Radiation
- 3. RCS Activity I Containment Radiation
- 3. RCS Activity I Containment Radiation A. Containment ot Applicable A. Containment radiation Not Applicable ot Applicable A. Containment radiation monitor monitor reading radiation monitor reading greater greater than (site-reading greater than than (site-specific specific value). (site-specific value). value). OR 8. (Site-specific indications that reactor coolant activity is greater than 300 µCi/gm dose equivalent I-131). Seabrook Station Nuclear Power Plant A. Post LOCA Not Applicable A. Post LOCA Radiation Not Applicable Not Applicable A. Post LOCA Radiation onitors Radiation Monitors Monitors M 6576A-I or RM M 6576A-1 or RM RM 6576A-l or 65768-1 65768-1 65768-1 :::: 16 R/hr. ".'._ 1,305 R/hr. -95 R/hr. OR 8. RCS activity
> BOO uCi/gm Dose -quivalent I 131 as determined per rocedure CS0925.0I, eactor Coolan Post Accident Sampling. 36 L FISSION PRODUCT BARRIER ICS/EALS Difference
/Justification All Barriers: Loss & Potential Loss 3.A: Site specific information
, see V23 EPCALC-06-0 I -Rad Values for Fission Product Barrier Matrix NEI 99-01 Rev 6 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass 4. Containment Integrity or Bypass ot Applicable Not Applicable Not Applicable Not Applicable A. Containment isolation is A. Containment required pressure greater than AND (site-specific value) EITHER of the OR following:
B. Explosive mixture 1. Containment exists inside integrity has been containment lost based on OR Emergency c. I. Containment Director udgment.
pressure greater OR than (site-2. UNISOLABLE specific pressure pathway from the setpoint) containment to the AND environme nt exists. 2. Less than one OR full train of B. Indications of RCS (site-specific leakage outside of system or containment.
equipment) is operating per design for 15 minutes or longer. Seabrook Station Nuclear Power Plant 37