| | Q | CCA | Title |
|---|
| 05000261/FIN-2010008-01 | 2010Q1 | H.1(f) | Aging Management Program for exterior surface of EOF/TSC Main Storage Tank |
| 05000261/FIN-2010002-01 | 2010Q1 | | Inaccurate Drawings Result I Loss of RWST Level Indication Due to Freezing |
| 05000261/FIN-2010002-02 | 2010Q1 | P.2 | A Emergency Diesel Generator Fuel Oil Transfer Pump Power Supply Cable Subjected to Continuous Submersion in Water Design Deficiency |
| 05000261/FIN-2010009-13 | 2010Q2 | | Dedicated Shutdown Diesel Generator Failed to Start Due to Low Starting Air Pressure |
| 05000261/FIN-2010009-01 | 2010Q2 | | Monitoring of Plant Parameters and Alarms |
| 05000261/FIN-2010009-02 | 2010Q2 | | RCS Cooldown Rate Exceeds Technical Specification 3.4.3 limit |
| 05000261/FIN-2010009-03 | 2010Q2 | | Utilization of operators During Events Requiring Use of Concurrent Procedures |
| 05000261/FIN-2010009-04 | 2010Q2 | | Fidelity of Plant-Referenced Simulator |
| 05000261/FIN-2010009-07 | 2010Q2 | | Loss of Seal Water Results in Failure of the A Main Condeser Vacuum Pump |
| 05000261/FIN-2010003-01 | 2010Q2 | | Failure to determine the cause of and take corrective actions to preclude repetition of an identified programmatic deficiency in foreign-material-exclusion controls. |
| 05000261/FIN-2010009-14 | 2010Q2 | | Unexpected Loss of Instrument Bus 3 for Two Minutes |
| 05000261/FIN-2010009-12 | 2010Q2 | | NUREG 0737 Response From Licensee to the NRC Describing the Behavior of RCP Seal Cooling Following a Loss of Offsite Power Event |
| 05000261/FIN-2010009-11 | 2010Q2 | | FCV 626, RCP Thermal Barrier Outlet Isolations CCW Valve, Unexpected Closure |
| 05000261/FIN-2010009-10 | 2010Q2 | | Failure of Charging Pump Suction Valves to Automatically Transfer Due to Errors in Implementing a Instrumentation Component Upgrade |
| 05000261/FIN-2010009-05 | 2010Q2 | | Corrective Action for Operating Crew Performance Issues |
| 05000261/FIN-2010009-08 | 2010Q2 | | Deficiencies in Non Safety-Related Cable Installation |
| 05000261/FIN-2010009-09 | 2010Q2 | | Failure to Repair Circuit Breaker 52/24 Resulting in Breaker Being Unable to Operate |
| 05000261/FIN-2010009-06 | 2010Q2 | | Adequacy of Emergency Operating Procedure Background Documents |
| 05000261/FIN-2010004-02 | 2010Q3 | | Failure to Design and Implement a Simulator Model that Demonstrated Reference Plant Response |
| 05000261/FIN-2010006-01 | 2010Q3 | P.1
P.1(a) | Failure to Correct a Control Power Fuse Defect in 4kV Breaker 52/24 |
| 05000261/FIN-2010004-01 | 2010Q3 | H.7 | Failure to Have Adequate Work and Post Maintenance testing Instructions for the Volume Control Tank Comparator Module |
| 05000261/FIN-2010004-04 | 2010Q3 | H.7 | Failure to Establish an Adequate PATH-1 Emergency Operating Procedure |
| 05000261/FIN-2010004-03 | 2010Q3 | | Deficiencies in Non Safety-Related Cable Installation Result in Fire and Reactor Trip |
| 05000261/FIN-2010006-03 | 2010Q3 | | Materially Inaccurate Information Provided to NRC in LER 2009-001 which impacted the Regulatory Process |
| 05000261/FIN-2010402-01 | 2010Q3 | H.2 | Security |
| 05000261/FIN-2010004-05 | 2010Q3 | H.9 | Failure to Correctly Implement a Systems Approach to Training for the Licensed Operator Requalification Program |
| 05000261/FIN-2010005-03 | 2010Q4 | | Emergency Diesel Generator Inoperable in Excess of Technical Specifications Completion Time Due to Output Breaker Failure |
| 05000261/FIN-2010011-07 | 2010Q4 | H.7 | Failure to Implement Adequate Post Maintenance Test of Residual Heat Removal Valve Interlock Function |
| 05000261/FIN-2010011-06 | 2010Q4 | P.5
P.2(b) | Failure to Translate Vendor Recommendations Into Procedures for 480V Circuit Breakers |
| 05000261/FIN-2010011-05 | 2010Q4 | H.7 | Inadequate Criteria to Prevent Spurious Actuation of Amptector Trip Devices |
| 05000261/FIN-2010011-04 | 2010Q4 | | Failure to Correctly Translate EDG Starting Air System Design Requirements into TS |
| 05000261/FIN-2010011-03 | 2010Q4 | | Failure to Demonstrate the Capability of the Fuel Oil Storage Tank and the Service Water Pumps to Fulfill Their Safety Functions Under All Conditions |
| 05000261/FIN-2010011-02 | 2010Q4 | P.5
P.2(a) | Failure To Ensure that the Full Range of Emergency Diesel Generator Frequency is Accounted for in the Safety Analyses |
| 05000261/FIN-2010011-01 | 2010Q4 | | Failure to Establish Proper In-service Testing Acceptance Criteria to Prevent Reverse Rotation of the SDAFW Pump |
| 05000261/FIN-2010012-02 | 2010Q4 | | C RCP Motor Failure and Seal Damage |
| 05000261/FIN-2010005-01 | 2010Q4 | | Failure to Perform 5-year Vendor Manual Specified Reactor Coolant Pump Motor Inspections |
| 05000261/FIN-2010012-03 | 2010Q4 | P.3 | Operator Transient Response Adversely Affected by Uncorrected, Known Plant Deficiency |
| 05000261/FIN-2010012-01 | 2010Q4 | H.13 | Procedure Violation for Overriding Feedwater Isolation Safety Function in Mode 3 |
