ML12306A454: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
(6 intermediate revisions by the same user not shown)
Line 2: Line 2:
| number = ML12306A454
| number = ML12306A454
| issue date = 11/01/2012
| issue date = 11/01/2012
| title = Three Mile Island, Unit 1 - Electronic Transmission, Draft Request for Additional Information Regarding 2011 Steam Generator Tube Inspection Report (TAC No. ME8735)
| title = Electronic Transmission, Draft Request for Additional Information Regarding 2011 Steam Generator Tube Inspection Report
| author name = Bamford P J
| author name = Bamford P
| author affiliation = NRC/NRR/DORL/LPLI-2
| author affiliation = NRC/NRR/DORL/LPLI-2
| addressee name = Khanna M K
| addressee name = Khanna M
| addressee affiliation = NRC/NRR/DORL/LPLI-2
| addressee affiliation = NRC/NRR/DORL/LPLI-2
| docket = 05000289
| docket = 05000289
| license number =  
| license number =  
| contact person = Bamford P J
| contact person = Bamford P
| case reference number = TAC ME8735
| case reference number = TAC ME8735
| document type = Memoranda, Request for Additional Information (RAI)
| document type = Memoranda, Request for Additional Information (RAI)
| page count = 4
| page count = 4
| project = TAC:ME8735
| project = TAC:ME8735
| stage = RAI
| stage = Draft RAI
}}
}}


=Text=
=Text=
{{#Wiki_filter:November 1, 2012-11-02 MEMORANDUM TO: Meena Khanna, Chief   Plant Licensing Branch I-2   Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation  
{{#Wiki_filter:November 1, 2012-11-02 MEMORANDUM TO: Meena Khanna, Chief Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation FROM:                  Peter Bamford, Project Manager /ra/
Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation


FROM:   Peter Bamford, Project Manager /ra/   Plant Licensing Branch I-2   Division of Operating Reactor Licensing     Office of Nuclear Reactor Regulation  
==SUBJECT:==
THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO.
ME8735)
The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensees 2011 steam generator tube inspection report. The draft RAI is related to Exelons submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1.
The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI.
This memorandum and the attachment do not represent an NRC staff position.
Docket No. 50-289
 
==Enclosure:==
As stated
 
November 1, 2012 MEMORANDUM TO: Meena Khanna, Chief Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation FROM:                 Peter Bamford, Project Manager /ra/
Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation


==SUBJECT:==
==SUBJECT:==
THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO. ME8735)
THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO.
The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensee's 2011 steam generator tube inspection report. The draft RAI is related to Exelon's submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1. The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI. This memorandum and the attachment do not represent an NRC staff position. Docket No. 50-289 Enclosure: As stated November 1, 2012 MEMORANDUM TO: Meena Khanna, Chief    Plant Licensing Branch I-2   Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation
ME8735)
The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensees 2011 steam generator tube inspection report. The draft RAI is related to Exelons submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1.
The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI.
This memorandum and the attachment do not represent an NRC staff position.
Docket No. 50-289
 
==Enclosure:==
As stated DISTRIBUTION:
Public                RidsNrrPMThreeMileIsland Resource                    LPL1-2 R/F Accession No.: ML12306A454
* via memorandum OFFICE        LPL1-2/PM            ESGB/BC NAME          PBamford            GKulesa*
DATE          11/01/2012          08/30/2012 OFFICIAL RECORD COPY


FROM:   Peter Bamford, Project Manager /ra/    Plant Licensing Branch I-2    Division of Operating Reactor Licensing    Office of Nuclear Reactor Regulation
DRAFT REQUEST FOR ADDITIONAL INFORMATION THREE MILE ISLAND NUCLEAR STATION, UNIT 1 2011 STEAM GENERATOR TUBE INSPECTIONS DOCKET NO. 50-289 By letter dated May 15, 2012, (Agencywide Documents Access and Management System (ADAMS) Accession Number ML12143A406), Exelon Generation Company, LLC (Exelon, the licensee), submitted information summarizing the results of the 2011 steam generator (SG) tube inspections performed at Three Mile Island, Unit 1 (TMI-1).
In addition to this report, the U.S. Nuclear Regulatory Commission (NRC) staff summarized information concerning the 2011 SG tube inspections at TMI-1 in a letter dated February 9, 2012 (ADAMS Accession No. ML120300547). Further, in a letter dated February 13, 2012 (ADAMS Accession No. ML120270416), the NRC staff documented a summary of a meeting held with Exelon and Entergy Operations Inc., to discuss tube-to-tube wear in once-through SGs. The NRC staff has determined that the additional information requested below is needed to complete its review of the 2011 SG inspection report for TMI-1.
: 1.      In order for the staff to better understand your inspection results, please provide the following general design information:
: a.      Tube manufacturer
: b.      Tube pitch (and whether it is square or triangular)
: c.      Please provide a diagram depicting your tube support naming convention and provide a tubesheet map showing the rows and columns of the tubes.
: d.      Please discuss if any stress relief was performed on the tubing following the thermal treatment of the Alloy 690 tubing.
: 2.      Please clarify what is meant by the best estimate structural limit and End of Cycle, High Probability limit. For example, is the best estimate structural limit the value determined assuming mean material properties and mean non-destructive examination uncertainties? What probability and confidence levels are used for the various input parameters used in determining the two structural limits? What were the yield and ultimate strengths used in calculating the structural limits and how were they determined?
: 3.      For wear at two lands, you indicate that the acceptance criteria is exceeded (limiting load of 3104 pounds), but that is acceptable due to the conservatism in defining the circumferential extent of the wear scar. Please discuss the conservatisms in determining the circumferential extent of the wear scars. In addition, please discuss whether this is consistent with industry guidelines for Enclosure


==SUBJECT:==
DRAFT determining condition monitoring and operational assessments limits. If it isnt consistent, please discuss your plans for submitting a deviation per Nuclear Energy Institute 03-08.
THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO. ME8735)
: 4. In discussing the wear indications detected at the tube support plate elevations, the term structural length is used. Please clarify this term. Is it the length of the limiting portion of the flaw from a structural integrity standpoint? If so, was it determined for all flaws or just a subset of the flaws (i.e., those that were inspected with an array probe)?
The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensee's 2011 steam generator tube inspection report. The draft RAI is related to Exelon's submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1. The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI. This memorandum and the attachment do not represent an NRC staff position. Docket No. 50-289 Enclosure: As stated  DISTRIBUTION: Public    RidsNrrPMThreeMileIsland Resource  LPL1-2 R/F  Accession No.: ML12306A454
: 5. Regarding the tubes with wear attributed to tube-to-tube contact, please discuss whether these tubes also have indications at the tube support plate elevations and whether there are any unique trends regarding the location of the tube support plate wear indications (e.g., all located at the upper edge of the tube support plate, all extend beyond the tube support plate, all tubes with tube-to-tube wear indications have corresponding tube support plate wear indications at supports 8 and 9, etc.). Please discuss whether the wear at the tube support plates is oriented in a specific direction (e.g., all are pointing to the center of the bundle). Please provide the mid-point of the tube (e.g., 8S + 20 inches).
* via memorandum OFFICE LPL1-2/PM ESGB/BC NAME PBamford GKulesa* DATE 11/01/2012 08/30/2012 OFFICIAL RECORD COPY DRAFT  Enclosure REQUEST FOR ADDITIONAL INFORMATION  THREE MILE ISLAND NUCLEAR STATION, UNIT 1  2011 STEAM GENERATOR TUBE INSPECTIONS  DOCKET NO. 50-289 By letter dated May 15, 2012, (Agencywide Documents Access and Management System (ADAMS) Accession Number ML12143A406), Exelon Generation Company, LLC (Exelon, the licensee), submitted information summarizing the results of the 2011 steam generator (SG) tube inspections performed at Three Mile Island, Unit 1 (TMI-1).
: 6. Please clarify whether all indications of wear attributed to tube-to-tube support plate interaction were contained within the axial elevation of the tube support plate.
In addition to this report, the U.S. Nuclear Regulatory Commission (NRC) staff summarized information concerning the 2011 SG tube inspections at TMI-1 in a letter dated February 9, 2012 (ADAMS Accession No. ML120300547). Further, in a letter dated February 13, 2012 (ADAMS Accession No. ML120270416), the NRC staff documented a summary of a meeting held with Exelon and Entergy Operations Inc., to discuss tube-to-tube wear in once-through SGs. The NRC staff has determined that the additional information requested below is needed to complete its review of the 2011 SG inspection report for TMI-1.
: 7. Please provide a summary of the cause of the wear attributed to tube-to-tube contact, as well as any planned corrective actions.}}
: 1. In order for the staff to better understand your inspection results, please provide the following general design information:  a. Tube manufacturer  b. Tube pitch (and whether it is square or triangular)  c. Please provide a diagram depicting your tube support naming convention and provide a tubesheet map showing the rows and columns of the tubes. d. Please discuss if any stress relief was performed on the tubing following the thermal treatment of the Alloy 690 tubing. 2. Please clarify what is meant by the "best estimate structural limit" and "End of Cycle, High Probability limit."  For example, is the best estimate structural limit the value determined assuming mean material properties and mean non-destructive examination uncertainties?  What probability and confidence levels are used for the various input parameters used in determining the two structural limits?  What were the yield and ultimate strengths used in calculating the structural limits and how were they determined? 
: 3. For wear at two lands, you indicate that the acceptance criteria is exceeded (limiting load of 3104 pounds), but that is acceptable due to the conservatism in defining the circumferential extent of the wear scar. Please discuss the conservatisms in determining the circumferential extent of the wear scars. In addition, please discuss whether this is consistent with industry guidelines for DRAFT  - 2 -  determining condition monitoring and operational assessments limits. If it isn't consistent, please discuss your plans for submitting a deviation per Nuclear Energy Institute 03-08. 4. In discussing the wear indications detected at the tube support plate elevations, the term "structural length" is used. Please clarify this term. Is it the length of the limiting portion of the flaw from a structural integrity standpoint? If so, was it determined for all flaws or just a subset of the flaws (i.e., those that were inspected with an array probe)? 5. Regarding the tubes with wear attributed to tube-to-tube contact, please discuss whether these tubes also have indications at the tube support plate elevations and whether there are any unique trends regarding the location of the tube support plate wear indications (e.g., all located at the upper edge of the tube support plate, all extend beyond the tube support plate, all tubes with tube-to-tube wear indications have corresponding tube support plate wear indications at supports 8 and 9, etc.). Please discuss whether the wear at the tube support plates is oriented in a specific direction (e.g., all are pointing to the center of the bundle). Please provide the mid-point of the tube (e.g., 8S + 20 inches). 6. Please clarify whether all indications of wear attributed to tube-to-tube support plate interaction were contained within the axial elevation of the tube support plate.
: 7. Please provide a summary of the cause of the wear attributed to tube-to-tube contact, as well as any planned corrective actions.  
}}

Latest revision as of 20:39, 11 November 2019

Electronic Transmission, Draft Request for Additional Information Regarding 2011 Steam Generator Tube Inspection Report
ML12306A454
Person / Time
Site: Three Mile Island Constellation icon.png
Issue date: 11/01/2012
From: Peter Bamford
Plant Licensing Branch 1
To: Meena Khanna
Plant Licensing Branch 1
Bamford P
References
TAC ME8735
Download: ML12306A454 (4)


Text

November 1, 2012-11-02 MEMORANDUM TO: Meena Khanna, Chief Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation FROM: Peter Bamford, Project Manager /ra/

Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation

SUBJECT:

THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO.

ME8735)

The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensees 2011 steam generator tube inspection report. The draft RAI is related to Exelons submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1.

The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI.

This memorandum and the attachment do not represent an NRC staff position.

Docket No. 50-289

Enclosure:

As stated

November 1, 2012 MEMORANDUM TO: Meena Khanna, Chief Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation FROM: Peter Bamford, Project Manager /ra/

Plant Licensing Branch I-2 Division of Operating Reactor Licensing Office of Nuclear Reactor Regulation

SUBJECT:

THREE MILE ISLAND, UNIT NO. 1 - ELECTRONIC TRANSMISSION, DRAFT REQUEST FOR ADDITIONAL INFORMATION REGARDING 2011 STEAM GENERATOR TUBE INSPECTION REPORT (TAC NO.

ME8735)

The attached draft request for additional information (RAI) was transmitted by electronic transmission on November 1, 2012, to Ms. Stephanie Hanson, at Exelon Generation Company, LLC (Exelon, the licensee). This draft RAI was transmitted to facilitate the technical review being conducted by the Nuclear Regulatory Commission (NRC) staff and to support a conference call (if needed) with Exelon in order to clarify the licensees 2011 steam generator tube inspection report. The draft RAI is related to Exelons submittal, dated May 15, 2012, regarding the results of the 2011 steam generator tube inspections at Three Mile Island, Unit 1.

The draft questions were sent to ensure that they were understandable, the regulatory basis was clear, and to determine if the information was previously docketed. Additionally, review of the draft RAI would allow Exelon to evaluate and agree upon a schedule to respond to the RAI.

This memorandum and the attachment do not represent an NRC staff position.

Docket No. 50-289

Enclosure:

As stated DISTRIBUTION:

Public RidsNrrPMThreeMileIsland Resource LPL1-2 R/F Accession No.: ML12306A454

  • via memorandum OFFICE LPL1-2/PM ESGB/BC NAME PBamford GKulesa*

DATE 11/01/2012 08/30/2012 OFFICIAL RECORD COPY

DRAFT REQUEST FOR ADDITIONAL INFORMATION THREE MILE ISLAND NUCLEAR STATION, UNIT 1 2011 STEAM GENERATOR TUBE INSPECTIONS DOCKET NO. 50-289 By letter dated May 15, 2012, (Agencywide Documents Access and Management System (ADAMS) Accession Number ML12143A406), Exelon Generation Company, LLC (Exelon, the licensee), submitted information summarizing the results of the 2011 steam generator (SG) tube inspections performed at Three Mile Island, Unit 1 (TMI-1).

In addition to this report, the U.S. Nuclear Regulatory Commission (NRC) staff summarized information concerning the 2011 SG tube inspections at TMI-1 in a letter dated February 9, 2012 (ADAMS Accession No. ML120300547). Further, in a letter dated February 13, 2012 (ADAMS Accession No. ML120270416), the NRC staff documented a summary of a meeting held with Exelon and Entergy Operations Inc., to discuss tube-to-tube wear in once-through SGs. The NRC staff has determined that the additional information requested below is needed to complete its review of the 2011 SG inspection report for TMI-1.

1. In order for the staff to better understand your inspection results, please provide the following general design information:
a. Tube manufacturer
b. Tube pitch (and whether it is square or triangular)
c. Please provide a diagram depicting your tube support naming convention and provide a tubesheet map showing the rows and columns of the tubes.
d. Please discuss if any stress relief was performed on the tubing following the thermal treatment of the Alloy 690 tubing.
2. Please clarify what is meant by the best estimate structural limit and End of Cycle, High Probability limit. For example, is the best estimate structural limit the value determined assuming mean material properties and mean non-destructive examination uncertainties? What probability and confidence levels are used for the various input parameters used in determining the two structural limits? What were the yield and ultimate strengths used in calculating the structural limits and how were they determined?
3. For wear at two lands, you indicate that the acceptance criteria is exceeded (limiting load of 3104 pounds), but that is acceptable due to the conservatism in defining the circumferential extent of the wear scar. Please discuss the conservatisms in determining the circumferential extent of the wear scars. In addition, please discuss whether this is consistent with industry guidelines for Enclosure

DRAFT determining condition monitoring and operational assessments limits. If it isnt consistent, please discuss your plans for submitting a deviation per Nuclear Energy Institute 03-08.

4. In discussing the wear indications detected at the tube support plate elevations, the term structural length is used. Please clarify this term. Is it the length of the limiting portion of the flaw from a structural integrity standpoint? If so, was it determined for all flaws or just a subset of the flaws (i.e., those that were inspected with an array probe)?
5. Regarding the tubes with wear attributed to tube-to-tube contact, please discuss whether these tubes also have indications at the tube support plate elevations and whether there are any unique trends regarding the location of the tube support plate wear indications (e.g., all located at the upper edge of the tube support plate, all extend beyond the tube support plate, all tubes with tube-to-tube wear indications have corresponding tube support plate wear indications at supports 8 and 9, etc.). Please discuss whether the wear at the tube support plates is oriented in a specific direction (e.g., all are pointing to the center of the bundle). Please provide the mid-point of the tube (e.g., 8S + 20 inches).
6. Please clarify whether all indications of wear attributed to tube-to-tube support plate interaction were contained within the axial elevation of the tube support plate.
7. Please provide a summary of the cause of the wear attributed to tube-to-tube contact, as well as any planned corrective actions.