L-19-011, Plant, Unit 1 - Revision 1 of the Cycle 16 Core Operating Limits Report (COLR): Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:Tennessee Valley A wBL-19-011 January 29,2019 10 cFR 50.4 ATTN: Document Control Desk u. s. Nuclear Regulatory commission Washington, D.C. 20555-0001 | {{#Wiki_filter:Tennessee Valley A wBL-19-011 January 29,2019 10 cFR 50.4 ATTN: Document Control Desk | ||
: u. s. Nuclear Regulatory commission Washington, D.C. 20555-0001 Watts Bar Nuclear plant, Unit 1 Facility Operating License No. NpF-90 NRC Docket No. 50-390 | |||
==Subject:== | ==Subject:== | ||
UNIT 1 REVISION 1 OF THE CYCLE CORE OPERATING LIiIITS REPORT (coLR) '6 Pursuant to Watts Bar Nuclear Plant Technical Specifications (Tech Spec) Section 5.g.s.d, Tennessee Valley Authority (TVA) has encloseo irevision revision updates the W(z) values on Table A.1. | |||
i otine unit'i6v"re io cotR. rni. | |||
U.S. Regulatory Commission Page2 January 29,2019 | There are no regulatory commitments contained in this letter or the enclosure. should you have questions regarding this submittal, please contact Kim Hulvey at (4Zg) 365-7T20. | ||
Paul Simmons Site Vice President Watts Bar Nuclear plant | |||
U.S. Regulatory Commission Page2 January 29,2019 | |||
==Enclosure:== | ==Enclosure:== | ||
Watts Bar Nuclear Plant, Unit 't, Cycle 16 Core Operating Limits Report, Revision 1, January 2019 cc (Enclosure): | |||
NRC Regional Administrator - Region Il NRR Project Manager NRC Senior Resident lnspector | |||
ENCLOSURE 1 Watts Bar Nuclear Plant, Unit 1, Cycle 16 Gore Operating Limits Report Revision I January 2019 | |||
QA Record 136 1901 18 802 IVATTS BAR NUCLEAR PLANT, UNIT 1, CYCLE 16 CORE OPERATING LIMITS REPORT Revision 1 January 2019 Prepared by: | |||
Fuel Engineering Verified by: | |||
J. f/Ritchi{PVUR Fuel Engineering l ,1re Irt Date Reviewed by: | |||
Setter, WR Fuel Engineering Manager r r.fl 8/tt Date | |||
,//1'T-( | |||
B.T. Mack, Reacto fnginee Manager Date Approved by: | |||
'/ou/,r r, PORC Chairman Date d*rt | |||
,/1 ll, Plant Manager D ate Date of PORC Affected Revision Approval Pages Reason for Revision 0 4il27l2018 Ail lnitial lssue 1 See Above 1.9 Revised W(=) values due to DAO > 3% | |||
L,lnit I C1'clc lfi W.,\T]'S tsAR []agc I ol' I ltevision I | |||
LIMITS The cycle-specific parameter limits for the specifications listed in section 1.0 are presented in the following subsections. | 1.0 CORE OPERATING LIMITS REPORT This Core Operating Limits Report (COLR) for Watts Bar Unit 1 Cycle 16 has been prepared in accordance with the requirements of the Technical Specifications (TS) 5.9.5. | ||
These limits have been developed using the NRC approved methodologies specified in the Technical Specifications Section 5.9.5.The following abbreviations are used in this section: BOL Beginning of Cycle Life ARO AllRods Out ITZP HotZero Thermal Power EOL End of Cycle Life RTP Rated Thermal Power 2.1 MODERATOR TEMPERATURE COEFFICIENT - MTC (LCO 3.1.4)2.1.1 The MTC limits are: The ARO/HZP - MTC shall be less positive than or equal to 0 Ak/l/oF (upper limit).With the measured BOLIAROIHZP - MTC more positive than -3.277 x l0-5 Al/ld"F (as-measured MTC limit), establish control rod withdrawal limits to ensure the MTC remains less positive than or equal to 0 Ak/ld"F (upper limit) for all times in core life.The EOL/ARO/RTP - MTC shall be less negative than or equal to-4.5 x l0a Aldl/oF (lower limi0.2.1.2 The 300 ppm surveillance limit is: The measured 300 ppm /AROiRTP-MTC should be less negative than or equal to-3.75 x l0-4 Ak/ldoF.2.1.3 The 60 ppm surveillance limit is: The measured 60 ppm /ARO/RTP-MTC should be less negative than or equal to 4.28 x l0-4 Ak/k/oF.Unit I Cycle 16 WATTS BAR Page2 of 9 Revision I | The Technical Specifications affected by this report are listed below: | ||
3.1.4 Moderator Temperature Coefficient (MTC) 3.1.5 Rod Group Alignment Limits 3.1.6 Shutdown Bank Insertion Limits 3.L.7 Control Bank Insertion Limits 3.2.1 Heat Flux Hot Channel Factor (Fq(Z)) | |||
3.2.2 Nuclear Enthalpy Rise Hot Charurel Factor (Fo"*) | |||
3.2.3 Axial Flux Difference (AFD) 3.9.1 BoronConcentration 2.0 OPERATING LIMITS The cycle-specific parameter limits for the specifications listed in section 1.0 are presented in the following subsections. These limits have been developed using the NRC approved methodologies specified in the Technical Specifications Section 5.9.5. | |||
The following abbreviations are used in this section: | |||
BOL Beginning of Cycle Life ARO AllRods Out ITZP HotZero Thermal Power EOL End of Cycle Life RTP Rated Thermal Power 2.1 MODERATOR TEMPERATURE COEFFICIENT - MTC (LCO 3.1.4) 2.1.1 The MTC limits are: | |||
The ARO/HZP - MTC shall be less positive than or equal to 0 Ak/l/oF (upper limit). | |||
With the measured BOLIAROIHZP - MTC more positive than -3.277 x l0-5 Al/ld"F (as-measured MTC limit), establish control rod withdrawal limits to ensure the MTC remains less positive than or equal to 0 Ak/ld"F (upper limit) for all times in core life. | |||
The EOL/ARO/RTP - MTC shall be less negative than or equal to | |||
-4.5 x l0a Aldl/oF (lower limi0. | |||
2.1.2 The 300 ppm surveillance limit is: | |||
The measured 300 ppm /AROiRTP-MTC should be less negative than or equal to | |||
-3.75 x l0-4 Ak/ldoF. | |||
2.1.3 The 60 ppm surveillance limit is: | |||
The measured 60 ppm /ARO/RTP-MTC should be less negative than or equal to 4.28 x l0-4 Ak/k/oF. | |||
Unit I Cycle 16 WATTS BAR Page2 of 9 Revision I | |||
2.2 SHUTDOWN MARGTN - SDM (LCO 3.1.5,3.1.6, 3.1.7) 2.2.1 For TS 3.1.5, SDM shall be Z l.6a Ak/k in MODE I and MODE 2. | |||
MARGTN - SDM (LCO 3.1.5,3.1.6, 3.1.7)2.2.1 For TS 3.1.5, SDM shall be Z l.6a Ak/k in MODE I and MODE 2.2.2.2 For TS 3.1.6, SDM shall be> l.60/o Lklk in MODE I and MODE 2.2.2.3 For TS 3.1.7, SDM shall be> 1.6%o LWk inMODE I andMODE 2 withkeff> | 2.2.2 For TS 3.1.6, SDM shall be> l.60/o Lklk in MODE I and MODE 2. | ||
1.0.2.3 SHUTDOWN BANK TNSERTION LIMITS (LCO 3.1.6)2.3.1 The shutdown banks shall be withdrawn to a position greater than or equal to 225 steps withdrawn. | 2.2.3 For TS 3.1.7, SDM shall be> 1.6%o LWk inMODE I andMODE 2 withkeff> 1.0. | ||
2.3 SHUTDOWN BANK TNSERTION LIMITS (LCO 3.1.6) 2.3.1 The shutdown banks shall be withdrawn to a position greater than or equal to 225 steps withdrawn. | |||
2.4 CONTROL BAI{K INSERTION LIMITS (LCO 3.1.7) 2.4.1 The control banks are fully withdrawn or shall be limited in physical insertion as shown in Figure l. | |||
2.4.2 Each control bank shall be considered fully withdrawn from the core at greater than or equal to 225 steps. | |||
2.4.3 The control banks shall be operated in sequence by withdrawal of Bank A, Bank B, Bank C, and Bank D. The control banks shall be sequenced in reverse order upon insertion. | |||
2.4.4 Each control bank not fully withdrawn from the core shall be operated with the following overlap as a function of park position. | |||
Park Position (steps) Bank Overlap (steps) Bank Difference (steps) 225 109 116 226 r0 116 227 11 116 228 t2 116 229 13 116 na t4 l l6 231 r l5 116 2.5 HEAT FLUX HOT CHANNEL FACTOR -Bq(Z) (LCO 3.2.1) | |||
Fo(Z)< [CFQ/P] *K(Z) forP>0.5 Fq(Z)< [CFQ/0.5] *K(Z) forP<0.5 Where P - Thermal Power lRated Thermal Power 2.s.r cFQ - 2.s0 Unit I Cycle 16 WATTS BAR Page 3 of 9 Revision 1 | |||
2.5.2 K(Z) is provided in Figure 2. | |||
2-53 Faw(Z) = Fo'(Z) | |||
* W(Z)1P for P > 0.5 Fq*(Z) : Fq'(Z) | * W(Z)1P for P > 0.5 Fq*(Z) : Fq'(Z) | ||
* W(Z)/0.5 for P < 0.5 where: W(Z) values are provided in Table A.l. The table provides suflicient information to determine W(Z) versus core height for all cycle burnups.2.5.4 Partpower W(Z) values are only required to be used when the part power surveillance is performed using the moveable incore detector system.2.5.5 Faw(Z) Penalty Factor The Faw(Z) penalty factor is provided in Table A.2.2.6 ttucLEAR ENTHALPY RrSE HOT CHANNEL FACTOR - FarrN (LCO 3.2.2)Far* S F*"tt * ( I + PF * ( l-P))where P - Thermal Power lRated Thermal Power TT RTP FaH"" : I.65 for RF A-2 fuel, and PF : 0.3 2.7 AXrAL FLUX DIFFERENCE - AFD (LCO 3.2.3)2.7.1 The AFD limits for Cycle 16 are provided in Figure 3.2.8 REFUELING BORON CONCENTRATION (LCO 3.9.1)2.8.1 The refueling boron concentration shall be > 2000 ppm.3.0 NUMBER OF TPBARS IN REACTOR CORE (TS 4.2.1)3.0.1 There are 1584 tritium producing burnable absorber rods (TPBARs) in the reactor core for Cycle 16.Unit 1 WATTS BAR | * W(Z)/0.5 for P < 0.5 where: W(Z) values are provided in Table A.l. The table provides suflicient information to determine W(Z) versus core height for all cycle burnups. | ||
?ts E, o-E 3 | 2.5.4 Partpower W(Z) values are only required to be used when the part power surveillance is performed using the moveable incore detector system. | ||
Unit 1 WATTS BAR | 2.5.5 Faw(Z) Penalty Factor The Faw(Z) penalty factor is provided in Table A.2. | ||
2.6 ttucLEAR ENTHALPY RrSE HOT CHANNEL FACTOR - FarrN (LCO 3.2.2) | |||
Far* S F*"tt * ( I + PF * ( l-P)) | |||
where P - Thermal Power lRated Thermal Power TT RTP FaH"" : I.65 for RF A-2 fuel, and PF : 0.3 2.7 AXrAL FLUX DIFFERENCE - AFD (LCO 3.2.3) 2.7.1 The AFD limits for Cycle 16 are provided in Figure 3. | |||
2.8 REFUELING BORON CONCENTRATION (LCO 3.9.1) 2.8.1 The refueling boron concentration shall be > 2000 ppm. | |||
3.0 NUMBER OF TPBARS IN REACTOR CORE (TS 4.2.1) 3.0.1 There are 1584 tritium producing burnable absorber rods (TPBARs) in the reactor core for Cycle 16. | |||
Unit 1 Cycle 16 WATTS BAR Page 4 of 9 Revision 1 | |||
?ts E, | |||
o | |||
-E 3 | |||
.a 1so a. | |||
lrJ g F 3 | |||
F I | |||
Lzs 6 | |||
o a. | |||
A 1oo H | |||
z-o c, | |||
tts 0.0 0.2 0.4 0.5 0.8 1.0 FRACTION OF RATED THERMAT POWER Figure I Control Bank Insertion Limits Versus Thermal Power Four Loop Operation Note: Fully withdrawn region shall be the condition where shutdown and control banks are at a position within the interval of >225 and323l steps withdrawn. | |||
Unit 1 Cycle 16 WATTS BAR Page 5 of 9 Revision 1 | |||
1.2 1.1 1.0 L E-_ | |||
0.9 0.8 l-o o | |||
= | |||
(L o.7 o | |||
LL 0.6 I core Heioht KU\ | |||
oo | |||
.N G | |||
E 0.5 l-zo o.4 0.3 o.2 0.1 0 | |||
o 2 468 10 12 Core Height (feet) | |||
Figure 2 K(z) - Normalized Fq(z) as a Function of Core Height Unit 1 Cycle 16 WATTS BAR Page 6 of 9 Revision I | |||
120 110 100 90 80 o | |||
8ro | |||
= | |||
6 E | |||
o f60 E' | |||
o r}a (r | |||
fso o | |||
s 40 | |||
-20 -10 0 10 Flux Difference (Ll) Yo f igure 3 Axial Flux Difference Acceptable Operation Limits as a function of Rated Thermal Power (RAOC) | |||
Unit I Cycle 16 WATTS BAR Page 7 of 9 Revision 1 | |||
trrr Table A.1 RAOC W(Z) Surveillance Factors Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) at 150 at 3000 at 60fi) at 80fi) at 12fi)0 at 16fi)0 at 18000 Height (ft) MWD'MTU MWD/MTU MWD/MTU MWD'MTU MWD/MTU MWD'MTU MWD/MTU (100% (100% (100% (100% (100% (100% (100% | |||
Powerl Powerl Powerl Powerl Powerl Powerl 12.0742 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.8730 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.6717 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1',!.4705 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1,0000 11.2693 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.0680 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 10.8668 1.1622 1.2701 1.2488 1.2143 1.14/,9 1.1530 1.1705 10.6655 1.1598 1.2670 1.2453 1.2113 1.1438 1.1510 1,1679 10.4643 1.1549 1.2612 1.2391 1.2057 1.1403 1.1465 1.1638 10.2631 1.1491 1.2538 1.2312 1.1983 1.1355 1.1405 1.1580 10.0618 1.1438 1.2445 1.2216 1.1900 1.1288 1.1326 1.1514 9.8606 1.1390 1.2.36.2 1.2128 1.1799 1125s 1.1273 1.1435 9.6594 1.1364 1.2301 1.2052 1.1715 1.1253 1.1270 1.1363 9.4581 1.1377 1.2223 1.1978 1.1702 1.1247 1.1264 1.1338 9.2569 1j370 1.2123 1.1997 1.1714 1.1266 1.1236 1.1%7 9.0557 1.1388 1.2042 1.2014 1.1723 1.1273 1.1248 1.1434 8.8544 1.1465 1.1996 1:1978 1.1713 1.1281 1.1304 1.1486 8.6532 1.1579 1.1959 1.1948 1.1712 1.1341 1.1402 1.1558 8.4519 1.1687 1.1914 1.1970 1.1766 1.',1443 1.1571 1.1736 8.2507 1.1769 1.1906 1.1973 1.1798 1.1525 11720 1.1892 8.0495 1.1828 1.1908 1.1953 1.1807 1.1587 1.1843 1.2020 7.8482 1.1866 1.1906 1.1918 1.1802 1.1633 1.1950 1.2131 7.6470 1.1881 1.1887 1jffi7 1.1779 1.1663 1.2034 '1.2218 7.4458 1.1878 1.1853 1.1800 1.1741 1.1675 1.2096 1.2282 7.2445 1.1888 1.1806 1.1719 1.1688 1,1666 1.2137 1.2322 7.0433 1.1904 1.1737 1.1628 1.1617 1.1679 1.2157 1.23/,0 6.8420 1.1909 1.1681 1.1573 1.1585 1.1701 1.2156 1.2335 6.6408 1.1898 1.1648 1.1559 1.1587 1.1701 1.2135 1.2309 6.4396 1.1876 1.1599 1.1526 1.1579 1.1692 1.2102 1.2266 6.2383 1.1835 1.1 553 1.1475 1.1557 1.1669 1.2050 1.2205 6.0371 1.1799 1.1515 1.1439 1.1523 1.1626 1.1978 1.2123 5.8359 1.1771 '1.1472 1.1410 1.1471 1.1584 1.1889 1.2022 5.6346 1.1738 1.1418 1.1373 11420 1.1559 1.1782 1.1903 5.4334 1.1700 1.1378 1.1 355 1.1404 '1.1540 1.1684 1.1782 5.2322 1.1680 1.1363 1.1357 1.1427 1.1537 1.1683 1.1716 5.0309 1.1690 1.1346 1.1357 1.',1454 1.1535 1.1698 1.1708 4.8297 1 1711 1.1318 't.1346 1.1469 1.1542 1.1711 1.1717 4.6284 1.1717 1.1286 1.1330 1.1479 1.1582 1.1715 1.1709 4.4272 1.1719 1.1249 1.1309 1.1482 1.1625 1.1710 1.1694 4.2260 1.173/' 1.1206 1.1282 1.1480 1.1664 1.1715 1.1672 4.4247 1.1749 1.1162 1.1252 1.1475 11700 1.1732 1.16/10 3.8235 1.1755 1.1111 1.1219 1.1463 1.1734 1.1743 1.1623 3.6223 1.1761 1.1069 1.12'.11 1.1454 1.1766 1.1762 1.1629 3.4210 1.1788 1.1065 1.1259 1.1472 1.1797 1.1829 1.1684 3.2198 1.1886 1.1090 1.1301 1.1518 1.1853 1.1912 1.1734 3.0186 1.1996 1.1 108 1.1351 1.1600 1.1938 1.1978 1.1791 2.8173 1.2095 1.1172 1_1444 11751 1.2093 1.2110 1.1926 2.6161 1.2210 1.1323 1.1588 1.1962 1.2320 1.2337 1.2138 2.4148 1.2356 1.1497 1.1761 1.2166 1.2534 1.2il6 1.2336 2.2136 1.2493 1.1671 1.1944 1.2365 1.2742 1.2747 1.2527 2.0124 1.2620 1.1839 1.2124 1.2559 1.2942 1.2940 1.2711 1.8111 1.2737 1.2001 1.2294 '1.2742 1.3131 1.3121 1.2884 1.6099 1.2842 1.2151 1.2452 1.2910 1.3304 1.3286 1.3M3 1.4087 1.2939 1.2279 1.2587 1.3053 1.3450 '1.3425 1.3177 1.2074 1.3025 1.2372 1.2684 1.3157 1.3554 1.3520 1.3268 1.0062 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.8049 1.0000 1.OOO0 1.0000 1.0000 1.0000 1.0000 1.0000 0.6037 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 o.4025 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.2012 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.0000 1.0000 1.0000 1.0000 '1.0000 1.0000 1.0000 1.0000 Unit I Cycle 16 WATTS BAR Page 8 of 9 Revision 1 | |||
trll Table 4.2 Fq*(Z) Penalty Factor Fo*(z) | |||
Core Burnup Penalty (MWD/MTU) | |||
Factor A11 Burnups 1.0200 Note: | |||
: l. The Penalty Factor, which is applied to Faw(Z) for compliance with Surveillance Requirement 3.2.1.2, is the maximum factor by which Fq*(Z) is expected to increase per 3l Effective Full Power Days (EFPD) starting from the burnup at which the fow1Zl was determined. | |||
Unit 1 Cycle 16 WATTS BAR Page 9 of 9 Revision 1}} |
Latest revision as of 13:50, 2 February 2020
ML19029B238 | |
Person / Time | |
---|---|
Site: | Watts Bar ![]() |
Issue date: | 01/29/2019 |
From: | Simmons P Tennessee Valley Authority |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
WBL-19-011 | |
Download: ML19029B238 (12) | |
Text
Tennessee Valley A wBL-19-011 January 29,2019 10 cFR 50.4 ATTN: Document Control Desk
- u. s. Nuclear Regulatory commission Washington, D.C. 20555-0001 Watts Bar Nuclear plant, Unit 1 Facility Operating License No. NpF-90 NRC Docket No. 50-390
Subject:
UNIT 1 REVISION 1 OF THE CYCLE CORE OPERATING LIiIITS REPORT (coLR) '6 Pursuant to Watts Bar Nuclear Plant Technical Specifications (Tech Spec) Section 5.g.s.d, Tennessee Valley Authority (TVA) has encloseo irevision revision updates the W(z) values on Table A.1.
i otine unit'i6v"re io cotR. rni.
There are no regulatory commitments contained in this letter or the enclosure. should you have questions regarding this submittal, please contact Kim Hulvey at (4Zg) 365-7T20.
Paul Simmons Site Vice President Watts Bar Nuclear plant
U.S. Regulatory Commission Page2 January 29,2019
Enclosure:
Watts Bar Nuclear Plant, Unit 't, Cycle 16 Core Operating Limits Report, Revision 1, January 2019 cc (Enclosure):
NRC Regional Administrator - Region Il NRR Project Manager NRC Senior Resident lnspector
ENCLOSURE 1 Watts Bar Nuclear Plant, Unit 1, Cycle 16 Gore Operating Limits Report Revision I January 2019
QA Record 136 1901 18 802 IVATTS BAR NUCLEAR PLANT, UNIT 1, CYCLE 16 CORE OPERATING LIMITS REPORT Revision 1 January 2019 Prepared by:
Fuel Engineering Verified by:
J. f/Ritchi{PVUR Fuel Engineering l ,1re Irt Date Reviewed by:
Setter, WR Fuel Engineering Manager r r.fl 8/tt Date
,//1'T-(
B.T. Mack, Reacto fnginee Manager Date Approved by:
'/ou/,r r, PORC Chairman Date d*rt
,/1 ll, Plant Manager D ate Date of PORC Affected Revision Approval Pages Reason for Revision 0 4il27l2018 Ail lnitial lssue 1 See Above 1.9 Revised W(=) values due to DAO > 3%
L,lnit I C1'clc lfi W.,\T]'S tsAR []agc I ol' I ltevision I
1.0 CORE OPERATING LIMITS REPORT This Core Operating Limits Report (COLR) for Watts Bar Unit 1 Cycle 16 has been prepared in accordance with the requirements of the Technical Specifications (TS) 5.9.5.
The Technical Specifications affected by this report are listed below:
3.1.4 Moderator Temperature Coefficient (MTC) 3.1.5 Rod Group Alignment Limits 3.1.6 Shutdown Bank Insertion Limits 3.L.7 Control Bank Insertion Limits 3.2.1 Heat Flux Hot Channel Factor (Fq(Z))
3.2.2 Nuclear Enthalpy Rise Hot Charurel Factor (Fo"*)
3.2.3 Axial Flux Difference (AFD) 3.9.1 BoronConcentration 2.0 OPERATING LIMITS The cycle-specific parameter limits for the specifications listed in section 1.0 are presented in the following subsections. These limits have been developed using the NRC approved methodologies specified in the Technical Specifications Section 5.9.5.
The following abbreviations are used in this section:
BOL Beginning of Cycle Life ARO AllRods Out ITZP HotZero Thermal Power EOL End of Cycle Life RTP Rated Thermal Power 2.1 MODERATOR TEMPERATURE COEFFICIENT - MTC (LCO 3.1.4) 2.1.1 The MTC limits are:
The ARO/HZP - MTC shall be less positive than or equal to 0 Ak/l/oF (upper limit).
With the measured BOLIAROIHZP - MTC more positive than -3.277 x l0-5 Al/ld"F (as-measured MTC limit), establish control rod withdrawal limits to ensure the MTC remains less positive than or equal to 0 Ak/ld"F (upper limit) for all times in core life.
The EOL/ARO/RTP - MTC shall be less negative than or equal to
-4.5 x l0a Aldl/oF (lower limi0.
2.1.2 The 300 ppm surveillance limit is:
The measured 300 ppm /AROiRTP-MTC should be less negative than or equal to
-3.75 x l0-4 Ak/ldoF.
2.1.3 The 60 ppm surveillance limit is:
The measured 60 ppm /ARO/RTP-MTC should be less negative than or equal to 4.28 x l0-4 Ak/k/oF.
Unit I Cycle 16 WATTS BAR Page2 of 9 Revision I
2.2 SHUTDOWN MARGTN - SDM (LCO 3.1.5,3.1.6, 3.1.7) 2.2.1 For TS 3.1.5, SDM shall be Z l.6a Ak/k in MODE I and MODE 2.
2.2.2 For TS 3.1.6, SDM shall be> l.60/o Lklk in MODE I and MODE 2.
2.2.3 For TS 3.1.7, SDM shall be> 1.6%o LWk inMODE I andMODE 2 withkeff> 1.0.
2.3 SHUTDOWN BANK TNSERTION LIMITS (LCO 3.1.6) 2.3.1 The shutdown banks shall be withdrawn to a position greater than or equal to 225 steps withdrawn.
2.4 CONTROL BAI{K INSERTION LIMITS (LCO 3.1.7) 2.4.1 The control banks are fully withdrawn or shall be limited in physical insertion as shown in Figure l.
2.4.2 Each control bank shall be considered fully withdrawn from the core at greater than or equal to 225 steps.
2.4.3 The control banks shall be operated in sequence by withdrawal of Bank A, Bank B, Bank C, and Bank D. The control banks shall be sequenced in reverse order upon insertion.
2.4.4 Each control bank not fully withdrawn from the core shall be operated with the following overlap as a function of park position.
Park Position (steps) Bank Overlap (steps) Bank Difference (steps) 225 109 116 226 r0 116 227 11 116 228 t2 116 229 13 116 na t4 l l6 231 r l5 116 2.5 HEAT FLUX HOT CHANNEL FACTOR -Bq(Z) (LCO 3.2.1)
Fo(Z)< [CFQ/P] *K(Z) forP>0.5 Fq(Z)< [CFQ/0.5] *K(Z) forP<0.5 Where P - Thermal Power lRated Thermal Power 2.s.r cFQ - 2.s0 Unit I Cycle 16 WATTS BAR Page 3 of 9 Revision 1
2.5.2 K(Z) is provided in Figure 2.
2-53 Faw(Z) = Fo'(Z)
- W(Z)1P for P > 0.5 Fq*(Z) : Fq'(Z)
- W(Z)/0.5 for P < 0.5 where: W(Z) values are provided in Table A.l. The table provides suflicient information to determine W(Z) versus core height for all cycle burnups.
2.5.4 Partpower W(Z) values are only required to be used when the part power surveillance is performed using the moveable incore detector system.
2.5.5 Faw(Z) Penalty Factor The Faw(Z) penalty factor is provided in Table A.2.
2.6 ttucLEAR ENTHALPY RrSE HOT CHANNEL FACTOR - FarrN (LCO 3.2.2)
Far* S F*"tt * ( I + PF * ( l-P))
where P - Thermal Power lRated Thermal Power TT RTP FaH"" : I.65 for RF A-2 fuel, and PF : 0.3 2.7 AXrAL FLUX DIFFERENCE - AFD (LCO 3.2.3) 2.7.1 The AFD limits for Cycle 16 are provided in Figure 3.
2.8 REFUELING BORON CONCENTRATION (LCO 3.9.1) 2.8.1 The refueling boron concentration shall be > 2000 ppm.
3.0 NUMBER OF TPBARS IN REACTOR CORE (TS 4.2.1) 3.0.1 There are 1584 tritium producing burnable absorber rods (TPBARs) in the reactor core for Cycle 16.
Unit 1 Cycle 16 WATTS BAR Page 4 of 9 Revision 1
?ts E,
o
-E 3
.a 1so a.
lrJ g F 3
F I
Lzs 6
o a.
A 1oo H
z-o c,
tts 0.0 0.2 0.4 0.5 0.8 1.0 FRACTION OF RATED THERMAT POWER Figure I Control Bank Insertion Limits Versus Thermal Power Four Loop Operation Note: Fully withdrawn region shall be the condition where shutdown and control banks are at a position within the interval of >225 and323l steps withdrawn.
Unit 1 Cycle 16 WATTS BAR Page 5 of 9 Revision 1
1.2 1.1 1.0 L E-_
0.9 0.8 l-o o
=
(L o.7 o
LL 0.6 I core Heioht KU\
oo
.N G
E 0.5 l-zo o.4 0.3 o.2 0.1 0
o 2 468 10 12 Core Height (feet)
Figure 2 K(z) - Normalized Fq(z) as a Function of Core Height Unit 1 Cycle 16 WATTS BAR Page 6 of 9 Revision I
120 110 100 90 80 o
8ro
=
6 E
o f60 E'
o r}a (r
fso o
s 40
-20 -10 0 10 Flux Difference (Ll) Yo f igure 3 Axial Flux Difference Acceptable Operation Limits as a function of Rated Thermal Power (RAOC)
Unit I Cycle 16 WATTS BAR Page 7 of 9 Revision 1
trrr Table A.1 RAOC W(Z) Surveillance Factors Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) Max W(z) at 150 at 3000 at 60fi) at 80fi) at 12fi)0 at 16fi)0 at 18000 Height (ft) MWD'MTU MWD/MTU MWD/MTU MWD'MTU MWD/MTU MWD'MTU MWD/MTU (100% (100% (100% (100% (100% (100% (100%
Powerl Powerl Powerl Powerl Powerl Powerl 12.0742 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.8730 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.6717 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1',!.4705 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1,0000 11.2693 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.0680 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 10.8668 1.1622 1.2701 1.2488 1.2143 1.14/,9 1.1530 1.1705 10.6655 1.1598 1.2670 1.2453 1.2113 1.1438 1.1510 1,1679 10.4643 1.1549 1.2612 1.2391 1.2057 1.1403 1.1465 1.1638 10.2631 1.1491 1.2538 1.2312 1.1983 1.1355 1.1405 1.1580 10.0618 1.1438 1.2445 1.2216 1.1900 1.1288 1.1326 1.1514 9.8606 1.1390 1.2.36.2 1.2128 1.1799 1125s 1.1273 1.1435 9.6594 1.1364 1.2301 1.2052 1.1715 1.1253 1.1270 1.1363 9.4581 1.1377 1.2223 1.1978 1.1702 1.1247 1.1264 1.1338 9.2569 1j370 1.2123 1.1997 1.1714 1.1266 1.1236 1.1%7 9.0557 1.1388 1.2042 1.2014 1.1723 1.1273 1.1248 1.1434 8.8544 1.1465 1.1996 1:1978 1.1713 1.1281 1.1304 1.1486 8.6532 1.1579 1.1959 1.1948 1.1712 1.1341 1.1402 1.1558 8.4519 1.1687 1.1914 1.1970 1.1766 1.',1443 1.1571 1.1736 8.2507 1.1769 1.1906 1.1973 1.1798 1.1525 11720 1.1892 8.0495 1.1828 1.1908 1.1953 1.1807 1.1587 1.1843 1.2020 7.8482 1.1866 1.1906 1.1918 1.1802 1.1633 1.1950 1.2131 7.6470 1.1881 1.1887 1jffi7 1.1779 1.1663 1.2034 '1.2218 7.4458 1.1878 1.1853 1.1800 1.1741 1.1675 1.2096 1.2282 7.2445 1.1888 1.1806 1.1719 1.1688 1,1666 1.2137 1.2322 7.0433 1.1904 1.1737 1.1628 1.1617 1.1679 1.2157 1.23/,0 6.8420 1.1909 1.1681 1.1573 1.1585 1.1701 1.2156 1.2335 6.6408 1.1898 1.1648 1.1559 1.1587 1.1701 1.2135 1.2309 6.4396 1.1876 1.1599 1.1526 1.1579 1.1692 1.2102 1.2266 6.2383 1.1835 1.1 553 1.1475 1.1557 1.1669 1.2050 1.2205 6.0371 1.1799 1.1515 1.1439 1.1523 1.1626 1.1978 1.2123 5.8359 1.1771 '1.1472 1.1410 1.1471 1.1584 1.1889 1.2022 5.6346 1.1738 1.1418 1.1373 11420 1.1559 1.1782 1.1903 5.4334 1.1700 1.1378 1.1 355 1.1404 '1.1540 1.1684 1.1782 5.2322 1.1680 1.1363 1.1357 1.1427 1.1537 1.1683 1.1716 5.0309 1.1690 1.1346 1.1357 1.',1454 1.1535 1.1698 1.1708 4.8297 1 1711 1.1318 't.1346 1.1469 1.1542 1.1711 1.1717 4.6284 1.1717 1.1286 1.1330 1.1479 1.1582 1.1715 1.1709 4.4272 1.1719 1.1249 1.1309 1.1482 1.1625 1.1710 1.1694 4.2260 1.173/' 1.1206 1.1282 1.1480 1.1664 1.1715 1.1672 4.4247 1.1749 1.1162 1.1252 1.1475 11700 1.1732 1.16/10 3.8235 1.1755 1.1111 1.1219 1.1463 1.1734 1.1743 1.1623 3.6223 1.1761 1.1069 1.12'.11 1.1454 1.1766 1.1762 1.1629 3.4210 1.1788 1.1065 1.1259 1.1472 1.1797 1.1829 1.1684 3.2198 1.1886 1.1090 1.1301 1.1518 1.1853 1.1912 1.1734 3.0186 1.1996 1.1 108 1.1351 1.1600 1.1938 1.1978 1.1791 2.8173 1.2095 1.1172 1_1444 11751 1.2093 1.2110 1.1926 2.6161 1.2210 1.1323 1.1588 1.1962 1.2320 1.2337 1.2138 2.4148 1.2356 1.1497 1.1761 1.2166 1.2534 1.2il6 1.2336 2.2136 1.2493 1.1671 1.1944 1.2365 1.2742 1.2747 1.2527 2.0124 1.2620 1.1839 1.2124 1.2559 1.2942 1.2940 1.2711 1.8111 1.2737 1.2001 1.2294 '1.2742 1.3131 1.3121 1.2884 1.6099 1.2842 1.2151 1.2452 1.2910 1.3304 1.3286 1.3M3 1.4087 1.2939 1.2279 1.2587 1.3053 1.3450 '1.3425 1.3177 1.2074 1.3025 1.2372 1.2684 1.3157 1.3554 1.3520 1.3268 1.0062 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.8049 1.0000 1.OOO0 1.0000 1.0000 1.0000 1.0000 1.0000 0.6037 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 o.4025 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.2012 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.0000 1.0000 1.0000 1.0000 '1.0000 1.0000 1.0000 1.0000 Unit I Cycle 16 WATTS BAR Page 8 of 9 Revision 1
trll Table 4.2 Fq*(Z) Penalty Factor Fo*(z)
Core Burnup Penalty (MWD/MTU)
Factor A11 Burnups 1.0200 Note:
- l. The Penalty Factor, which is applied to Faw(Z) for compliance with Surveillance Requirement 3.2.1.2, is the maximum factor by which Fq*(Z) is expected to increase per 3l Effective Full Power Days (EFPD) starting from the burnup at which the fow1Zl was determined.
Unit 1 Cycle 16 WATTS BAR Page 9 of 9 Revision 1